Operating Instructions
42 Plasma Colour Television
PL 4201
Before operating the unit, please read this manual thoroughly.
3U84011A [E] COVER
1
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Features ................................................................... 2
Contents................................................................... 3
Important notice, Installation .................................... 4
Location of controls .................................................. 7
Remote Control ........................................................ 8
Antenna connection ............................................... 10
Quick guide for MENU-operation ........................... 11
On-screen Language Selection.............................. 12
Teletext Language Selection.................................. 12
Automatic station presetting with the built-in Tuner ... 13
Change the order of stored channel....................... 14
Manual TV station presetting ................................. 15
Connection to Satellite Receiver ............................ 16
Basic Operation...................................................... 17
Timer functions....................................................... 18
Stereo reception with the built-in tuner................... 19
Bass, Treble and Balance ...................................... 21
Selecting the BBE .................................................. 22
Turning off the built-in speakers ............................. 22
Brightness, Contrast, Colour and Sharpness/DNR .... 23
Selecting the color temperature ............................. 24
Blue back ............................................................... 24
Picture format ......................................................... 25
Scrolling the CINEMA-Wide picture ....................... 26
Auto 4:3 Default ..................................................... 26
Full White ............................................................... 27
Screen Saver ......................................................... 27
Static Image ........................................................... 27
Using the panel lock feature................................... 28
PC-Setting.............................................................. 29
Connecting an HDMI or a DVI device to the
HDMI input ............................................................. 31
Teletext .................................................................. 32
Conceal stored channels........................................ 34
Connection to other equipment .............................. 35
AV-Color adjusting ................................................. 37
Troubleshooting table............................................. 38
Specifications ......................................................... 38
3
3U84011A [E] P02-10
3
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notice, Installation
This unit has been produced according to all current safety regulations. The following safety tips should safeguard
users against careless use and the dangers connected with such use.
• Every electrical appliance can have a defect despite careful and thorough manufacturing. If you detect smoke
development or an exceptionally strong build-up of heat, then pull out the power plug immediately.
• Ensure that the unit is sufficiently ventilated! Never place next to or underneath curtains!
• Only plug flex into 230V/50Hz. Do not plug into any other voltage.
• The apparatus must be connected to a main socket outlet with a protective earthing connection.
• The socket-outlet must be installed near the equipment and easily accessible.
• Make sure that an expert carries out any repairs.
• Do not open unit. Your own attempts to repair the unit could result in a fire.
• Keep away from rodents. Rodents (and also cockatiels) enjoy biting into electric flexes.
The animal can cause a short cut (fire hazard!) and receive a fatal electric shock.
• Always hold plug when pulling out plug from power mains supply system. Do not pull on flex. The flex can become
overloaded and cause a short cut.
• Never wet clean. Only use a damp cloth, the same as when cleaning furniture.
• Do not submerge in or under water!
• Set up unit so that no one is able to trip over the flex.
• Only use the unit on a stable, shock-free base in order to avoid any danger from falling.
• Takenotethattoddlerscanpulltheunitdownfromthetableorcupboardbymeansofitsflex. Childrencanhurtthemselves
when doing this.
• Do not use the unit near heat sources. The casing and flex could be damaged by the impact of heat.
• Watch out for kiddies copying what adults do! Do not stick any objects through the vents!
• The vents must remain open! No newspapers or covers should be put on the unit!
• The remote control is not a toy! Toddlers could swallow the batteries. If a battery has been swallowed, please seek out
a doctor immediately.
• The screen is made of glass and can break if damage is done to it. Be careful when collecting sharp-edged glass splitters.
You could be hurt or the unit could be damaged.
• If the unit is mounted on the wall, contact the shop where you purchased the unit for advice, and leave the installation work
to experts. Incomplete installation work can cause you injuries.
• When installing the set on a wall, allow at least 6 cm clearance between the rear of the set and the wall. Clearance of less
than 6 cm will obstruct the vents and cause the interior of the set to overheat, resulting in faults or damage to the set.
• Taking fall-prevention measures
- If these measures are not taken, the unit can fall and you could be injured.
- Contact the shop where you purchased the unit to obtain full details of the measures.
• When a TV stand is used,
- Ensure the unit is fully on the stand and placed in the centre.
- Do not leave the stand doors open.
- You could be hurt as a result of the unit falling or breaking, or your fingers being caught or jammed. Take extra
precautions if you have children.
Attention!
Cleaning instructions for your Plasma TV.
Safety note:
Before you start to clean, switch the set's power off completely and disconnect the plug from the mains power supply.
Be careful not to scratch the plastic coated front panel - it is highly vulnerable to accidental scratching (e.g. by
fingernails or other sharp items). While cleaning, do not wear jewelry that could cause surface scratching (such as
rings, wrist-watch, etc.). Use a lint-free cloth and pure water to clean with, but make sure the cloth is thoroughly wrung
out so that it is just damp and not soaking wet - also make sure that the cloth is free from any dirt that could cause
scratching to the surface.
Wipe the set clean using minimal pressure.
Do not use standard window cleaning fluid. Its alcohol / ammonia will dissolve the front window’s coating.
Never use solvent or thinner. Never use special cleaners which are designed for cleaning PC Monitors or CRT TVs.
Finally carefully rub dry with a clean dry lint-free cloth.
Do not use paper towels or tissues to clean the set - paper can disintegrate when wet or may leave a trail of dust
behind. Some paper can also be abrasive and scratch your screen.
Please pay attention to the following instructions in order to avoid receiving a life-threatening electric shock:
• Protect against moisture. Never use in the bath or sauna.
• Never use near a bath, shower or swimming pool.
• Never use the unit if it has got wet. This can also mean condensation moisture, which occurs in the winter when the cold
unit is brought into a heated flat. Wait before operating the unit especially after it has been transported in the winter, until
the cold unit has adjusted to the room temperature.
• Do not place any heavy objects on the flex. Electrical isolation could be damaged.
• Never wrap insulating tape around damaged flexes or on damaged plugs. These should be repaired by experts instead.
• Never run a unit with a defect cabinet. Do not make provisional repairs, if a cabinet is damaged. This should be replaced
by a new cabinet.
• Unplug the unit from the mains power supply prior to the cleaning of the unit.
4
3U84011A [E] P02-10
4
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notice, Installation
Avoid to place the unit on any surfaces that may be subjected
to vibrations or shocks.
This Plasma display is designed to be mounted horizontally
(wide viewing).
To protect the unit during a thunder storm unplug the AC
power cord and disconnect the antenna. Caution: Do
not touch the antenna connector.
OK !
When you leave your home for a long period of time, unplug
the AC power cord for safety reasons.
OK !
The unit becomes warm when in operation. Do not place
any covers or blankets on the unit in order to prevent
overheating. The ventilation holes are not to be blocked. Do
not set up near radiators. Do not place in direct sunshine.
When placing on a shelf leave 10 cm free space around the
whole unit.
Make some space around TV (Correct shelf assembly).
The apparatus shall not be exposed to dripping or splashing
and that no objects filled with liquids, such as vases, shall
be placed on the apparatus.
Liquids spilled into the unit can cause serious damages.
Switch OFF the Power Supply to the unit and consult a
qualified service personnel before attempting to use the unit
again.
5
3U84011A [E] P02-10
5
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notice, Installation
Moving the unit or carrying by hand
When the unit is moved a long way, unplug the power cord and disconnect the antenna,
connecting cables and any fall-prevention apparatus.
• Moving without doing so could result in damage to the power cord, a fire, electric shocks or injuries from
dropping the unit.
Ensure that unpacking and transfer of the unit is carried out by two or more people and that
the unit stays upright when doing this.
• Do not carry the unit with its screen facing upwards or downwards.
When the TV stand has casters, remove caster cups from the stand
and push it while supporting the unit.
• Ensure that you support the unit when the stand is pushed, as this can
cause the unit to fall and you could be injured.
Handle carefully to avoid shocks.
Secure the casters when the unit is installed on a TV stand with casters.
• The stand can move and you could be hurt if the casters are not secured.
Remove casters when the stand is placed on a soft surface such as a mat
and carpet.
The distance between eyes and the screen should be about 5 ~ 7 times
as long as diagonal length of the screen.
• If not, eyes will strain.
When installing the Monitor on a table, be careful not to place the edge
of its stand.
• This may cause the Monitor to fall, causing serious injury to a child or adult,
and serious damage to the Monitor.
Possible Adverse Effects on Plasma Screen: If a fixed (non-moving) pattern remains on the plasma
screen for long periods of time, the image can become permanently engrained in the plasma TV panel
and cause subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR
WARRANTY. Never leave your TV on for long periods of time while it is displaying the following formats or
images:
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media
on a normal (4:3) display (black bars at top and bottom of screen); or viewing normal style (4:3)
media on a widescreen (16:9) display (black bars on left and right sides of screen).
To avoid the engraining, we recommend that you use the screen saver function. (see P.27)
The following symptoms are not signs of malfunction but technical limitation. Therefore we
disclaims any responsibility for these symptoms.
• Plasma display panels are manufactured using an extremely high level of precision technology,
however sometimes parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
• Do not install the TV near electronic equipment that is susceptible to electromagnetic waves.
It may cause interference in images, sound, etc. In particular, keep video equipment away from this
product.
• Effect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
6
3U84011A [E] P02-10
6
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of controls
Left Side
Front Side
9
10
8
1
2
3
4
5
6
7
8
Description of Indicators and Controls
1. Main Power Switch: To turn the unit on or off completely.
2. CHANNEL ▲/▼ -Buttons: Press ▲ to change to a higher numbered channel set into memory. Press
▼ to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning
on the unit.
3. Volume ▲/▼ -Buttons / In Menu : Setting. To display the menu-screen, press these buttons
simultaneously for more than one second.
4. INPUT-Button: Select input mode for TV/AV/HDMI/PC.
5. POWER button: To turn the unit standby mode on and off.
6. STANDBY/ON indicator: It lights up in red at STANDBY, and in green at POWER ON.
7. Remote sensor
8. Loudspeakers
9. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
10. AV4-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
7
3U84011A [E] P02-10
7
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Function
Page
11
Turn the unit on or off
Sleep-Timer
17
17
17
Display program position number
Turn the sound on/off
Select channel
Select Videotext page
13, 17, 32, 34
32
Select connective socket
11, 29,
35, 36
Switches between the present channel and the
last selected channel
Sub Page selection
17
33
Call Menu
Select TV-channel or Videotext page step by step 17, 32, 34
In Menu: Setting
In Standby: Turning on the unit
11
Volume
17
In Menu: Setting
Memorize
Videotext ON/ Mix/ OFF
32
Reset Sound/Picture adjustments
Videotext enlargement
21, 23
33
Program position-skipping
Answer a Quiz
34
33
Two Channel-Sound TONE 1/2 selector
Videotext page 100
20
33
Videotext-Timer display
Hold the text page
17
33
TOPtext buttons
32
25
Select picture format
8
3U84011A [E] P02-10
8
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Install the batteries
Use batteries type UM-4 (AAA-Size).
Do not use the storage batteries. The remote control does not work properly with weak voltage from the storage
batteries. Replace the exhausted batteries with new batteries. Never charge batteries. Batteries may explode by
the charge.
Note:
An exhausted empty batteries may leak, namely corrosive electrolyte will leak out. The remote control may
damage by it. Therefore remove the exhausted batteries early.
Close the battery
compartment.
Open the battery compart-
Install the batteries as shown
below.
2
3
1 ment.
Distance of Remote Control Operation
Remote sensor
Point the remote control
directly at the remote sensor.
Maximum distance approx. 5m
Transmitter window
The remote control handset will not work properly in the following cases:
If bright sunlight directly beams onto the unit front.
If an obstacle is placed between the unit and the
handset.
Z
Z
Z
Z
Z
Z
If the batteries have not been installed according
to their polarities.
If the batteries are weak.
9
3U84011A [E] P02-10
9
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connection
Note: Before you connect something:
• To avoid every possible damage, turn off the TV-unit with Main Power Switch and then pull the power
plug out.
• Arrange the desired connection.
• When the connection made up firmly and correctly, connect the unit to 230V and turn the unit on.
Connect the antenna as shown below. Connect the unit with an outdoor antenna (G) or a cable-net (A). In
case of reception disturbance, consult with a specialist of antenna.
(H)
(G)
(F)
(A)
(B)
(C)
(D)
(E)
(A) Antenna connection: The built-in Hyperband CATV tuner can receive all analog cable television
programs.
(B) Variable Audio output: To connect with an audio amplifier and external speakers, and adjust the
audio level using the TV’s remote control.
To control the audio, turn on the TV and the stereo amplifier, and turn off the TV's built-in speakers
(see page 22).
(C) Scart sockets (AV1/AV2/AV3): To the connection of scart cables. See page 36 for AV4-Input.
(D) HDMI input: See page 31.
(E) PC Monitor input (PC): See page 29.
(F) Power supply: Connect the supplied power cable. Connect to 230 V / 50 Hz only. Never
repair a damaged AC power cord with isolation-tape. Have a specialist exchange with a new AC
power cord. Do not let your pet loose near the cable. To bite isolation is danger of life. Above all, a rat,
a parakeet, a hamster, a rabbit and other toothed animals can bite the cable.
(G) Outdoor antenna: If the outdoor antenna already exists, you can also connect to it for analog TV-
program.
(H) Bracket holes: To fix a wall mounting bracket (not supplied) here, remove the screws.
10
3U84011A [E] P02-10
10
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide for MENU-operation
Make sure the antenna connection
and power supply as the description
on previous page.
Preparation:
• Turn on the unit with Main Power Switch on the bottom left
of screen. Standby indicator will light up in red. Then press
POWER on the unit or
(POWER) on the remote control.
Standby indicator will change to green.You can also turn the
unit on with CHANNEL ▲/▼ on the unit or
/
on the remote control.
• Press 1. CH1 will appear.
Call MENU and for example: Select AUTO TUNING.
Press MENU.
1
If you press MENU for the first time after the purchase, the
Language-selection screen (step 1 on next page) will
appear.
Press
select
or
to
2
AU TO T U N I N G
M A N UA L T U N I N G
C H A L L O C AT I O N
T E X T L A N G UA G E
L A N G UA G E
.
W E S T
E N G L I S H
: SELECT
: ADJUST
MENU : EXIT
Press
or
to select
AUTO TUNING.
3
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T
E N G L I S H
... on the following
pages the MENU can
be called in the same
way as here.
:
SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
4
PICTURE AUDIO SETUP OPTION
menu
menu menu menu
B R I G H T N E S S
C O N T R A S T
C O L O U R
T I N T
S H A R P N E S S
D N R
2 5
2 5
2 5
0
2 5
Note:
• Each time you press 0/AV, the AV
mode will change as follows:
Each setting
option
O F F
TV
AV1
AV2
PC
HDMI
AV4
AV3
: SELECT
: ADJUST
MENU : EXIT
Short guide
If no buttons are pressed for more than
approx. 60 seconds, the MENU
disappears automatically.
11
3U84011A [E] P11-18
11
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
On-screen Language Selection/Teletext Language Selection
On-screen Language Selection
Select LANGUAGE.
1
Then press
or
to select the desired language.
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T
E N G L I S H
E N G L I S H
/
D E U T S C H
/
F R A N C A I S
I TA L I A N O
/
E S PA N O L
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
Teletext Language Selection
Select TEXT LANGUAGE.
1
Then press
or
to select WEST or EAST.
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T / E A S T
E N G L I S H
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
12
3U84011A [E] P11-18
12
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic station presetting with the built-in Tuner
The Automatic station presetting is not suitable for the combined operation with Satellite- or
Digital-receiver (e.g. D-Box). These units use own station memory. It is impossible to store the
same channel again which was already stored in a TV.
If you receive all stations through Satellite, do not execute with the Automatic station presetting.
The automatic station presetting can not find any station which was memorized in a Satellite
receiver. See page 16.
Preparation:
Connect a antenna or a cable-net.
Do not connect any other unit or cable.
To avoid every reception disturbance, all connected unit must
be turned off and power supply is connected.
Press 1-button. CH1 will appear.
Select AUTO TUNING.
1
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T
E N G L I S H
: SELECT
: ADJUST
MENU : RETURN
Press
system.
then press
or
to select Video
2
3
: SELECT
: ADJUST
MENU : RETURN
Then press
.
The broadcast-searcher searches the broadcasts and
stores them in order. During the search the sound is
muted.
When all programs have been stored, the AUTO TUNING
menu will appear automatically.
13
3U84011A [E] P11-18
13
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Change the order of stored channel
The Automatic station presetting
stores the found station in a
specific order. This order can be
changed.
Select CH ALLOCATION.
1
Then press
.
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T
E N G L I S H
: SELECT
: ADJUST
MENU : RETURN
Press
or
until the position number that
2
3
you want to move appears (e.g. CH 40), then press
ENTER.
Press
or
until the program-position on
which you want to put the moving program appears (e.g.
CH 5), then press ENTER.
The original program 40 is now stored in memory position 5.
To arrange the other channels, repeat this procedure or...
4
5
Note:
To arrange all channels, begin with
program 1.
Furthermore, continue this procedure to
select the broadcast that should be seen
on program-position 2, 3, 4 and so on.
Press MENU repeatedly until the MENU disappears.
14
3U84011A [E] P11-18
14
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual TV station presetting
Usually Automatic station presetting stores all stations of each reception-area. In case of bad
receiving condition, some broadcasts may not be stored. These stations can also be stored
manually.
Example: Preset the ZDF on program position 2.
Select MANUAL TUNING. Then press
.
1
2
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
T E X T L A N G U A G E
L A N G U A G E
W E S T
E N G L I S H
:
SELECT
:
ADJUST
MENU : RETURN
Press
or
to select PAL or SECAM-L.
Then press ENTER.
:
ADJUST
ENTER
:
SET
MENU : RETURN
Press
. The auto search starts forward. It will stop at
3
4
each station with good reception. Press
again until you
receive the ZDF. Then press ENTER.
Notes:
:
:
F.TUNE
SET
:
SEARCH
ENTER
MENU : RETURN
• The auto search stops at the best
receiving position automatically.
A manual fine tuning is normally not
necessary. If want, you can do the
manual fine tuning additionally. In
step 3, when the auto search
stopped at each station, press
The channel position number will be highlighted. Press
or repeatedly until the number next to
CH change to 2. Then press ENTER.
The ZDF was now stored in the channel position CH 2.
or
until the desired
fine tuning achieved.
Then press ENTER.
• The search moves up to the next
station position automatically. If
want, you can also hold the search
:
:
SELECT
SET
ENTER
MENU : RETURN
manually. Press
or
at the
desired position. The search keeps
hold. If want, do the fine tuning as
the description above.
Repeat the steps 2 and 4 to preset other TV stations.
5
6
Press MENU repeatedly until the MENU disappears.
15
3U84011A [E] P11-18
15
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to Satellite Receiver
Connect with Satellite receiver as shown below.
Select the TV-Program at the satellite receiver.To do this, use the remote control of the satellite
receiver.You can not store the same station once again additionally in PDP-Monitor which already
stored in satellite receiver.
Plasma television
Satellite
Receiver
Scart-cable (not supplied)
16
3U84011A [E] P11-18
16
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
Channel selection
With the 10 number buttons.
Example:
• No. 2: Press 0 and within 2 seconds, press 2.
The station stored in the 2nd store position will
appear.
• No. 29: Press 2 and within 2 seconds, press 9.
The station stored in the 29th store position will
appear.
Press
or
to change to the program
forward or backward. The changing takes approx. 2
seconds. If the auto search stored only 5 stations,
these only 5 also will appear. Still uncovered or
hidden store position (see P.34) will not appear.
QuickView
button allows you to go back to the last selected
channel.
Volume adjusting
Press or to adjust the volume. The volume level
disappears after 4 seconds.
MUTE
Press
. The sound will be cut off. MUTE will appear for
approx. 4 seconds.
The muting can be released by pressing
again or
or
.
DISPLAY
Press DISPLAY.
Channel number
and wide screen
type will appear.
The display will
disappear after 4
seconds.
STATUS
Press STATUS. The clock and a program information will appear
approx. 2 seconds later, if the station supported.
SLEEP TIMER
Press . SLEEP
and the minutes
until the shut-off
will appear. Each
time you press
the number near
SLEEP will
change.
When the
displayed time
runs out, the unit will switch to standby. The display will
disappear after approx. 4 seconds.
Note:
If the built-in tuner does not receive
anything (e.g. if no antenna is
connected) during TV-operation, then
the TV-unit will change to standby after
approx. 15 minutes.
To cancel the sleep time:
Press
repeatedly until “0” appears.
17
3U84011A [E] P11-18
17
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer functions
The on timer feature allows you to
automatically turn on your TV after a
preset amount of time (up to 12
hours and 59 minutes) at the
selected channel.
Example: Turning on the TV to channel 3 at 10:30.
Select ON TIMER.
1
Then press ENTER.
The off timer also allows you to turn
off your TV after a preset amount of
time. You can set the off timer in
conjunction with the on timer.
: SELECT
ENTER : SET
MENU : RETURN
Press
or
to enter the hours and minutes
2
3
4
at which you want your TV to automatically switch on.
: ADJUST
ENTER : SET
: SELECT
MENU : RETURN
• For rapid time change in ten minute intervals, press and
hold the
or
button.
Press
.
Press
or
to select the channel you wish
to display when you TV switches on.
Press ENTER.
Notes:
•
button allows you to set the
time in step 2 backward.
• When a timer-event is executed, the
timer will return to 00:00.
• If the OFF TIMER and SLEEP-
timer overlapped, the TV will shut off
with the earlier reached timer.
• The TV will automatically turn off
approximately 1 hour later after the
ON TIMER turns on the TV. If you
wish to continue watching the TV,
press any button to cancel the one
hour automatic shut off. This shut off
feature prevents the TV from playing
continuously if no OFF TIMER is set.
If OFF TIMER is set, the shut off
feature does not work.
: ADJUST
ENTER : SET
: SELECT
MENU : RETURN
If you wish to set the OFF TIMER, press
to select OFF TIMER at step 1.
or
Press MENU repeatedly until the MENU disappears.
Put your TV into standby mode by pressing
button.
(POWER)
18
3U84011A [E] P11-18
18
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo reception with the built-in tuner
This built-in Tuner can receive
NICAM stereo sound reception:
Stereo-/2 channel-program. In case
the Stereo broadcast was send out
with NICAM, this unit can
1
Select NICAM.
distinguish these NICAM Stereo
broadcasts automatically.
Press
or
to select AUTO or OFF.
Select OFF if you want no NICAM-reception.
N I C A M
B A S S
A U T O
2 5
/
O F F
T R E B L E
B A L A N C E
B B E
S P E A K E R S
H D M I
2 5
0
O F F
O N
H D M I
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
Followings can be displayed by NICAM-reception.
“NICAM ST” illuminates
for approx. 4 seconds
when a NICAM
STEREO broadcast
signal is received.
“NICAM M1”
illuminates for approx.
4 seconds when a
NICAM MONO A
broadcast signal is
received.
“NICAM M1/M2”
illuminates for approx.
4 seconds when a
NICAM MONO A and
MONO B broadcast
signal is received.
It will be displayed for
the NICAM signal for
approx. 4 seconds
when the “NICAM OFF”
is selected in menu
screen.
Note:
In case of bad reception, the stereo
sound also can be disturbed.
Stereo reception in Germany
“STEREO” illuminates
for approx. 4 seconds
when a STEREO
broadcast signal is
received.
19
3U84011A [E] P19-25
19
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Stereo reception with the built-in tuner
Incaseof2channel-soundreception,
youcanselectthedesiredsoundwith
AUDIO 1/2.
Each time you press the AUDIO 1/2, the both sound channels
alternate with each other.
NICAM-2 channel-Sound reception (not in Germany)
2 channel-Sound reception in Germany
20
3U84011A [E] P19-25
20
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Bass, Treble and Balance
Select BASS. Then press
or
to adjust the bass.
1
2
N I C A M
B A S S
T R E B L E
B A L A N C E
B B E
A U T O
2 5
2 5
0
O F F
O N
H D M I
S P E A K E R S
H D M I
: SELECT
NORMAL : RESET
: ADJUST
MENU : RETURN
If you wish to set the TREBLE or BALANCE, press
or to select TREBLE or BALANCE.
Press MENU repeatedly until the MENU disappears.
Notes:
• TocentralizeBASS,TREBLEandBAL-
ANCE, press NORMAL in step 1.
• If you do not press any button within 1
minute, the menu will disappear auto-
matically.
21
3U84011A [E] P19-25
21
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the BBE/Turning off the built-in speakers
Selecting the BBE
By correcting the phase delay and distortion naturally
generated by speaker systems, the BBE sound feature
ensures that the sound that reaches your ears is as
natural as the original sound. Human voices are
clearer and music is natural and well-defined.
Select BBE.
Then press
1
or
to select ON or OFF.
N I C A M
B A S S
A U T O
2 5
T R E B L E
B A L A N C E
B B E
S P E A K E R S
H D M I
2 5
0
O N
O N
H D M I
/
O F F
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
Turning off the built-in speakers
Use this feature to turn the TV speakers off when you connect
an audio system (see P.36).
Select SPEAKERS.
1
Then press
or
to select ON or OFF.
N I C A M
B A S S
A U T O
2 5
T R E B L E
B A L A N C E
B B E
2 5
0
O F F
S P E A K E R S
H D M I
O N
H D M I
/
O F F
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
Note:
Make sure the volume control of your
audio amplifier is set to a moderate
listening level.
Licensed by BBE Sound, Inc. under
one or more of the following US
patents: 5510752, 5736897. BBE and
BBE symbol are registered trademarks
of BBE Sound, Inc.
22
3U84011A [E] P19-25
22
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness, Contrast, Colour and Sharpness/DNR
Brightness, Contrast, Colour and Sharpness
Select BRIGHTNESS. Then press
brightness.
or
to adjust the
1
: SELECT
NORMAL : RESET
: ADJUST
MENU : RETURN
If you wish to set the CONTRAST, COLOUR,TINT, or
SHARPNESS, press or to select
CONTRAST, COLOUR,TINT, or SHARPNESS.
The menu “TINT” can be selected at AV-Playback, if a
NTSC 3.58MHz signal comes in through a AV socket and
NTSC or AUTO was selected at AV COLOUR (see P.37).
Press MENU repeatedly until the MENU disappears.
2
DNR
DNR (Digital Noise Reduction) can reduce the roughness of
the picture.
Select DNR. Then press
OFF.
or
to select ON or
1
: SELECT
: ADJUST
MENU : RETURN
Notes:
Press MENU repeatedly until the MENU disappears.
2
• To centralize these picture adjust-
ments, press NORMAL in step 1.
• In HDMI mode, the “DNR”-option can
not be selected.
23
3U84011A [E] P19-25
23
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the color temperature/Blue back
Selecting the color temperature
Change the picture quality by selecting from three
preset color temperatures –cool, medium and warm–
as described in the following table;
Select COLOUR TEMPERATURE.
1
C O L O U R
T E M P E R AT U R E
M E D I U M
M E D I U M
O N
C O O L
/
/
WA R M
B L U E B A C K
: SELECT
: ADJUST
MENU : RETURN
Press
or
to select the desired setting.
2
3
Mode
Picture Quality
COOL
MEDIUM
WARM
Bluish
Neutral
Reddish
Press MENU repeatedly until the MENU disappears.
Blue back
You can set the TV to automatically change to a blue
screen and mute the sound if the signal is weak or
absent, or when there is no input from an external
device.
Select BLUE BACK.
1
Then press
or
to select ON or OFF.
C O L O U R
T E M P E R AT U R E
B L U E B A C K
M E D I U M
O N
/
O F F
: SELECT
: ADJUST
MENU : RETURN
ON: This function is turned on.
OFF: This function is turned off.
Press MENU repeatedly until the MENU disappears.
2
24
3U84011A [E] P19-25
24
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture format
The broadcaster may send the signal which can set the picture-width automatically. If a TV-Channel was
received with automatic picture-width setting signal, then the picture-width can be changed to
corresponding format automatically, when AUTO had been selected. If you do not like this automatic
picture-width changing, select the other format.
AUTO
Manual format setting
Press PICTURE SIZE repeatedly as you want.
Press PICTURE SIZE repeatedly until
AUTO appears. See above Note.
4:3
It shows a 4:3-picture in original size with black bands on left
and right side.
FULL SCREEN:
It shows a 4:3-picture in full screen-mode.
(FULL SCREEN)
Note:
A screen is distorted as you approach the both ends of a
screen.
16:9
It corresponds for 16:9-format which comes from e.g. DVD or
from a SatReceiver or DVB-T receiver.
Note: The built-in tuner can not receive 16:9-format.
(16:9)
CINEMA:
It corresponds for 4:3-format with which black bars on top and
bottom, e.g. the built-in tuner can receive it.
SUBTITLE SUBTITLE
SUBTITLE SUBTITLE
(CINEMA)
Note:
In CINEMA mode, the top of the picture are slightly cut off.
To see the cut part, scroll the picture (see page 26).
14:9:
Notes:
It shows a 4:3 picture in 14:9-format.
• The PICTURE SIZE feature is not
available in the PC mode.
• In HDMI mode, the PICTURE SIZE
feature is not available.
(14:9)
25
3U84011A [E] P19-25
25
20/12/05, 15:21
Download from Www.Somanuals.com. All Manuals Search And Download.
Scrolling the CINEMA-Wide picture/Auto 4:3 Default
Scrolling the CINEMA-wide picture
During the CINEMA-wide mode you can adjust the vertical
picture position.
Note:
You cannot move the picture vertically in other wide mode.
Select
VERTICAL
POSITION.
1
Then press
.
: SELECT
: ADJUST
MENU : RETURN
Press
or
to adjust the vertical position of
2
the picture.
• To raise the
picture, press
.
: ADJUST
ENTER : SET
• To lower the
picture, press
.
: ADJUST
ENTER : SET
Press MENU repeatedly until the MENU disappears.
3
Auto 4:3 Default
In case AUTO mode is selected for wide mode and any
picture-width signal is not received, you can preset beforehand
either “4:3” or “Full screen”.
Select AUTO 4:3
DEFAULT.
1
Then Press
or
to select 4:3
or FULL.
: SELECT
: ADJUST
MENU : RETURN
Press MENU
repeatedly until the MENU disappears.
2
26
3U84011A [E] P26-34
26
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Full White/Screen Saver/Static Image
Full White
Aids recovery of retained images on the screen.
Select FULL WHITE.
Then press
.
: SELECT
: ADJUST
MENU : RETURN
MENU disappears and the picture showing on the screen will
be replaced with a white screen. The screen will return to
normal when any button is pressed.
Screen Saver
Moves the picture on the screen in small increments
continuously to reduce the image retention of stationary
images i.e. channel identification.logo etc.
Select SCREEN
SAVER.
1
Then press
to select ON
or OFF.
or
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
Static Image
Automatically reduce the brightness in small steps if a static
(stationary) image is displayed for a long time. The speed and
delay time of this function will depend upon the brightness of
displayed picture.
Select STATIC
IMAGE.
1
Then press
to select ON
or OFF.
or
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
27
3U84011A [E] P26-34
27
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the panel lock feature
You can lock the front panel buttons
to prevent your settings from being
changed accidentally (by children,
for example).
Select PANEL LOCK.
1
Then press
to display the password entering screen.
When the panel lock is in ON, all
control buttons on the TV front
panel (except POWER) do not
operate.
: SELECT
: ADJUST
MENU : RETURN
Using the 10 number buttons to enter your password,
then press ENTER.
The PANEL LOCK menu screen appears.
If you input the password for the first time, enter the same
password again for confirmation.
2
• If you input wrong number, “ERROR” will appear for
approx. 4 seconds. Then input correct number again.
Press
press
or
to select PANEL LOCK and
3
4
or
to select ON.
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
If a button on the front panel is pressed, the message
“PANEL LOCK” appears for approx. 4 seconds.
To unlock the panel
Select OFF at step 3 above.
To change password
At step 3 above select NEW PASSWORD and press
display the password entering screen. Then input new
password.
to
28
3U84011A [E] P26-34
28
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
PC-Setting
In general, a vacuum tube monitor is equipped for your PC. Before you connect this PDP-Monitor to your
PC, change the adjustment of your PC's graphic card. Otherwise any picture will not appear on the PDP-
Monitor. Turn on your PC (still with your old Monitor) and select under 1280 x 768 for on-screen graphic
resolution. Select under 60 Hz for on-screen refresh rate. Turn off your PC and connect the turned off
Plasma-TV.
?
Use the optional PC-VGA cable (not supplied) to connect the
PDP-Monitor with your PC. Plug the cable carefully not to
break or bend the contact inside of plug.
VGA Cable
(not supplied)
Select PC input
Turn on the Plasma-TV again.
Press 0/AV repeatedly until “PC” appears on the TV screen.
See next page for PC Monitor Menu.
Note:
If there is no video signal from the computer when the unit is in
PC mode, “No Signal” will appear on the TV-screen for approx.
10 seconds.
Note:
The PC Monitor Menu settings are not
effective for normal TV-mode or
external input mode.
29
3U84011A [E] P26-34
29
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
PC-Setting
Example: Adjust the contrast.
During PC mode press MENU once. The Menu appears on
the TV-screen.
1
B R I G H T N E S S
C O N T R A S T
H O R P O S I T I O N
V E R P O S I T I O N
P H A S E
2 5
2 5
2 5
2 5
2 5
0
C L O C K
: SELECT
: ADJUST
MENU : EXIT
Press
press
or
to select CONTRAST. Then
2
3
or
to adjust CONTRAST.
B R I G H T N E S S
C O N T R A S T
H O R P O S I T I O N
V E R P O S I T I O N
P H A S E
2 5
2 5
2 5
2 5
2 5
0
C L O C K
: SELECT
NORMAL : RESET
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
Description about the each setting option:
PICTURE Menu
AUDIO Menu
BRIGHTNESS and CONTRAST: can be set as you
are accustomed to your TV. : the NORMAL button
resets these values to the middle.
HOR POSITION and VER POSITION: to adjust
the horizontal and vertical placing of the image.
PHASE and CLOCK: eliminates the horizontal
(PHASE) and vertical (CLOCK) interfering lines.
RED/GREEN/BLUE: influences the colour
balance. : the NORMAL button resets these values
to the middle.
BASS/TREBLE/BALANCE: Tone setting menu; the
NORMAL button resets these values to the middle.
BBE: Press
or
to select BBE ON or OFF
(see P. 22)
SPEAKERS: Press
or
to select SPEAKERS
ON or OFF (see P. 22).
WXGA INPUT: When you input WXGA, set this
option to “ON”.
WVGA INPUT: When you input WVGA, set this
option to “ON”.
30
3U84011A [E] P26-34
30
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an HDMIor a DVI device to the HDMI input
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Audio cord
(not supplied)
HDMI - to - DVI adapter cable
(HDMI type A connector)
DVI device
(supplied)
To DVI output
or
HDMI cable (type A connector)
HDMI device
(not supplied)
To HDMI out
Selecting the HDMI audio input source
You must choose an appropriate HDMI audio input setting for
each connection.
Select HDMI.
1
Press
or
to select HDMI or DVI.
N I C A M
B A S S
A U T O
2 5
T R E B L E
B A L A N C E
B B E
2 5
0
O F F
S P E A K E R S
H D M I
O N
H D M I / D V I
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the MENU disappears.
2
HDMI, the HDMI logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC.
31
3U84011A [E] P26-34
31
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Teletext is sent page by page. This unit is able to automatically store up to 812 pages.
Storage lasts until all pages have been received. The pages can only be accessed when they have been
stored. This can take a moment.
TOPtext
The TOPtext is teletext with a special directory.
On the lower part of the screen there are four different coloured
fields (red, green, yellow and blue). These fields lead directly to
the pages shown within. The coloured buttons on the remote
control correspond to the coloured fields. Press the appropriate
coloured button in order to activate the desired colour field.
Switch on / off Teletext
Teletext is not transmitted by all channels.
Select the channel that shows teletext.
Press . You will now see a teletext page. The channel
you have chosen does not send teletext if 100 is shown.
Press
again. Teletext and TV picture are shown
simultaneously.
Press
again in order to switch off teletext.
Press
again in order to switch on teletext again. The
last page which was stored is now shown.
Note:
You cannot select any other channels as long as teletext is
switched on. Switch teletext off when you want to switch over
to another channel.
Select Page
Press
or
until the page you desire appears.
Or ... enter the requested page number by using the 10
Number Buttons.
And if you mistype something, just enter the complete 3-digit
wrong page number then enter the desired number again. Or
... press one of the coloured teletext buttons so that a page
from TOPtext is shown.
32
3U84011A [E] P26-34
32
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Teletext
Hold Pages
Some pages are divided up into subpages by the channel.
Subpages are automatically shown in turn, as they are transmit-
ted. In order to hold the page, press . Press
to display the next subpage.
again in order
Directly Select Subpages
You can directly select the subpages if required.
Example:
Page 667 from ARD (German teletext) comprises of 2 subpages.
Intherightuppercorneryouwill,forexample,see1/2.Thatmeans
that page one of 2 subpages is being shown at the moment.
667 667 ARD-Text 21.07.03 15:01:38
1/2
Press
in order to select subpage 2. 4 dashes (----) are
shown. Enter 0 0 0 2. It can take a minute before subpage 0002
appears.
Press
again in order to switch off the subpage feature. You
can only select other teletext pages when the subpage feature is
switched off.
Enlargement
In order to enlarge the display, press
Either the upper or lower half of the screen is enlarged.
Each time you press you switch between the display of the
.
upper or lower half of the screen or the full picture.
Answering Quiz Questions
Some pages contain quiz questions with concealed answers.
Press
in order to show the answers.
Page 100
Press
in order to show page 100.
33
3U84011A [E] P26-34
33
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Conceal stored channels
The stored channels are switched back or fore individually using
or . Channels that should not appear can be
concealed. These channels are not deleted. They can be ac-
cessed at any time with the 10 Number Buttons.
Select the channel to be concealed (i.e. CH29).
Press SKIP.
The programme number flashes.
1
Select the next channel to be concealed.
Press SKIP.
The programme number flashes.
2
You can conceal as many channels as you like.
Example:
5 channels are automatically stored via the automatic
channel storage feature. When you keep pressing
then the channel will appear in the following order:
1, 2, 3, 4, 5, 1, 2, 3, 4, 5, 1, ... etc.
Now conceal programme places 3 and 5. The sequence is
now 1, 2, 4, 1, 2, 4, 1, ... etc.
Cancel Concealment of Channels
Select the concealed channels with the 10 Number Buttons.
The programme number flashes.
Press SKIP.
The programme number no longer flashes.
This channel is no longer concealed.
34
3U84011A [E] P26-34
34
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to other equipment
1. Connect with various unit
DVD player:
For best picture quality, select RGB-PLAYBACK on the DVD player (see Owner’s manual of the DVD
player). Always connect the DVD player to AV1 or AV3. AV1 and AV3-Scart socket can perform RGB-
playback. Press 0/AV on the TV-remote control repeatedly until AV1 appears.
Notes:
• S-Video can be playback with the Scart socket AV2 or side AV input AV4 (see page 36). If you wish to
utilize S-Video at Scart socket AV2, use an optional S-Video-to-SCART-Adaptor. (not supplied)
• RGB provide best-possible picture quality. Therefore in case of RGB-signal’s playback, color- and also
sharpness-adjustment can not be available.
Example: You will perform the color-adjustment as explained on P.23. During you adjust color with
remote control, the color level indicated on menu actually changes, however the displayed true color-
strength constantly remains with no-change.
• The DVD player always must be connected to TV-unit directly. It must not be connected to a video
recorder. Many DVDs are equipped with a copy-guard. These copy-guard causes reception disturbance
if the DVD player had been connected to a video recorder.
2. Two video recorder connection (e.g. to duplicate a video tape)
Select the “MONITOR” position in menu.
(see P.36 paragraph 5-2)
Select AV1-INPUT (see P.11).
You can see playback-picture of
videorecorder 1.
This signal does output via AV-2 and can
be recorded by videorecorder 2.
Videorecorder 2 does precisely record,
what you see on the screen.
35
3U84011A [E] P35-BACK
35
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to other equipment
3. Connecting an audio system
This connection allows you to hear the TV sound through external speakers connected to an audio
amplifier.
To control the audio through the amplifier, turn on the TV and the amplifier, set the volume of both to a
moderate level, and turn off the TV’s built-in speakers (see “Turning off the built-in speakers” on page
22).You will need one pair of standard audio cables.
Note:
If the volume of either the TV or the amplifier is set to 0 (or OFF), you will not hear any sound.
Note: The sound adjustment
(see P.21) works only for the
TV-speaker. It is not effective
for the audio output socket.
4. Connect to a Video camera or Video player
Connect the Video camera (or Video player)
and TV-unit with a Special cable as described.
Press 0/AV of TV-remote control repeatedly
until AV4 appears.
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable. Do not connect both a standard video
cable and an S-video cable at the same time,
or the picture performance will be unacceptable.
5. Setting of Scart socket AV2
In
, select AV2 OUTPUT or AV2 INPUT.
1
2
In case of “AV2 OUTPUT”-selection
Press
or
to select TV or MONITOR.
TV:
the latest channel position.
MONITOR: the picture displayed on TV-screen.
: SELECT
: ADJUST
MENU : RETURN
In case of “AV2 INPUT”-selection
Press
or
to select AV or S-VIDEO.
AV:
Composite signal (e.g. from VHS-Video
recorder).
S-VIDEO: S-Video signal (e.g. from DVD player with
S-Video output).
: SELECT
: ADJUST
MENU : RETURN
Press MENU repeatedly until the menu disappears.
3
36
3U84011A [E] P35-BACK
36
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
AV-Color adjusting
Connect with another equipment (See pages 35 and
36).
In
menu, select AV COLOUR.
or to select AUTO.
1
2
Press
: SELECT
: ADJUST
MENU : RETURN
If AUTO option does not work, press
desired color (e.g. NTSC 3.58).
or
to select
3
4
Press MENU repeatedly until the menu disappears.
Note:
PAL is the color system used in Germany. NTSC 3.58 is used
in the USA, PAL 60 used in Germany handled video recorders,
which play NTSC video tape recording.
DVD players, which are region code-free and can play NTSC
DVD, emit a different signal according to make and type. The
following are possible: PAL, SECAM, NTSC 3.58, NTSC4.43
and PAL60. If possible, select RGB on the DVD player as an
output signal and connect the DVD player and TV with a Scart
cable.
37
3U84011A [E] P35-BACK
37
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting table / Specifications
Troubleshooting table
Please check the following items, before you request for service.
Page
Symptom
Possible solution
No picture, no sound
10
Switch on the set.
Check the 230 V wall outlet.
Press 0/AV repeatedly until the desired operating status
appears.
29, 35
No reception
Preset the station without using the scartcable.
Press 1 on the remote control.
Connect the antenna.
10
10
Check your antenna.
The TV switches off with
This is normal.
17
missing antenna input signal
15 minutes after the antenna signal has disappeared,
the set will change to standby.
The unit is set to AV mode. Press 1 on the remote
control.
13
In
menu, TUNING-line
can not be selected.
Specifications
System:
Frequency Range:
PAL B/G, D/K, I/I, SECAM L Color System
PAL: 2-12, X, Y, Z, S1-S41, 21-69
SECAM: FB-FC, F1-F6, B-Q, 21-69
AC 230V, 50Hz
Power Supply:
Power Consumption:
Operation: approx. 250W
Stand by: approx. 2W
PDP:
41.58" TYPE (105.6 cm visible)
852 x 480 Pixel
HDMI input:
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
PC-Connection:
Output Power:
1280x720@60Hz / 1280x768@60Hz (according to Graphic card)
10W x 2 (MAX)
Surrounding temperature: Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Operating Humidity:
Dimensions:
Weight:
Less than 80%RH
121(W) x 71.7(H) x 34(D) cm
approx. 39 kg (w/o Accessories)
2 batteries (AAA/R03/UM-4)
Remote control unit
Accessories:
AC cord
HDMI-DVI Cable
Weight and dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
38
3U84011A [E] P35-BACK
38
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
3U84011A [E] P35-BACK
39
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
X
J3U84011A SH 06/02
3U84011A [E] P35-BACK
40
20/12/05, 15:22
Download from Www.Somanuals.com. All Manuals Search And Download.
|