R
SD34MIP
CAR DVD/VCD/CD/MP3/MPEG-4 PLAYER WITH
USB PORT/I-POD ANDAM/FM TUNER
Download from Www.Somanuals.com. All Manuals Search And Download.
00
Contents
Pause the Playback 33
Changing Audio Language(Multi-audio) 33
File Selector 33
Eject a Disc 33
Slow Motion Playback 33
Picture Sizes 33
On-Screen Display 33
Number Buttons 34
Setting the Playback Time 34
MO/ST Selector 34
Tuner
Band Selector 38
Manual/Automatic Tuning 38
Selecting the Station 38
DX/LOC Selector 38
8
MO/ST Selector 38
On-screen Display 38
Scanning/Memorizing Stations
Automatically 39
Number Buttons 39
Selecting Station Directly 39
Radio Menu 40
Program Playing 34
Playing PBC (Menu) 34
To Capture Picture 35
Exit an USB 35
Exit a SD Card 35
9
Additional Information
Simple Troubleshooting Guide 41
7
IPOD
IPOD play 36
Playing the Previous/Next Track 36
Playing the Track F.F/F.REW 36
Repeat Playing 36
Playing Tracks in Random Order 36
Pause the Playback 36
On-Screen Display 36
Tracks Selector 37
Back to Root Directory 37
Back to the previous Directory 37
Video or Picture Mode 37
Exit IPOD 37
3
Download from Www.Somanuals.com. All Manuals Search And Download.
09
Before You Start
Additional Information
About this manual
IMPORTANT SAFEGUARDS
Simple Troubleshooting Guide
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist below .
1. Be sure to connect the color coded
leads according to the diagram.
Incorrect connections may cause
the unit to malfunction or damage
the vehicle, s electrical system.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
Cause/Solution
Problem
.
.
No power.
2. Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in the
LCD or no function when
pressing the button.
Press RESET button.
3. Make sure all the connections are
completely correct before turning
on your unit.
addition to those functions related with
DVD/VCD/CD/MP3/MEPG-4/USB
operation that can only be operated by
the remote control, there are also
functions can be operated by the buttons
provided for the main unit.
.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Unable to receive stations.
4. When replacing the fuse(s), the re-
placement must be of the same am-
perage as shown on the fuse holder.
.
.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
Poor effect on receiving a
station.
5. Do not block vents or radiator pa-
nels. Blocking them will cause heat
to build up inside and may result in
fire.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
6. After completing the installation and
beginning to play the unit(including
replacing the battery), please remove
the front panel at first, and then press
RESET button on the base with
.
.
.
CDs cannot be loaded.
Sound skips.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
pointed object (such as ball-point
pen) to set the unit to initial status.
No images.
The Video line from main unit to the TVis not
connected properly.
.
Improper setting of the color system. Set the color
system to PAL or NTSC according to the
connected television.
Images skip.
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
Due to continuous product improvement, the operations
are subject to run the model.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
Tuner
Before You Start
Radio Menu
LOCAL
PRECAUTIONS
21
Press SETUP button, the monitor shows
the radio setup menu, you can press
[ ][ ][ ] to select your desired item, then
press ENTER on the remote control. Press ,
or to select EXIT, then press ENTER to
exit the setup.
RADIO MENU
This unit can play the following discs only:
22
[ ]
AREA
EUROPE
ON
Label on the disc
Recorded material
Size of disc
STEREO
LOCAL
Type of disc
DVD
OFF
Sound and moving
pictures
PICTURE PRESET
EXIT
12cm
Note:
Rotate VOL and briefly press it on the head
Sound and moving
pictures
*
VCD
CD
12cm
12cm
12cm
12cm
unit also performs the same function.
Press[ ]or [ ] to select LOCAL, then
press ENTER, the setting menu appears as
follow:
Press [ ] [ ] to select your desired item.
In this menu to search the LOCAL stations,
when selected ON, the strong signal local
stations can be received, when selected OFF,
the week signal out-of-town stations may
be received.
Sound only
Sound only
AREA
RADIO MENU
MP3
AREA
EUROPE
ON
Sound and moving
pictures
STEREO
LOCAL
MPEG-4
USB
OFF
MPEG-4
PICTURE PRESET
EXIT
Sound and moving
pictures
Version 2.0
and less
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
Picture
Press[ ]or [ ] to select AREA, then press
ENTER, the setting menu appears as follow:
Press [ ] [ ] to select your desired item.
You can select EUROPE or USAor FM
ONLYto search the stations quickly by your
current area.
RADIO MENU
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Do not use your CDs with paste residue
or ink attached.
AREA
EUROPE
ON
STEREO
LOCAL
PICTURE
LOCAL
PRESET
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
EXIT
Note:
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
*
Russian frequency not this item
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
STEREO
Press[ ]or[ ] to select PICTURE, then
press ENTER, the setting menu appears as
follow:
Press [ ] [ ] to select your desired item.
CAPTURED the captured picture set for
the wallpaper
RADIO MENU
(Shown as the picture)
AREA
EUROPE
ON
STEREO
LOCAL
OFF
To enjoy optimum sound and
images while playing, handle the
discs as follows:
PICTURE PRESET
EXIT
PRESET the initial wallpaper
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
Press[ ]or [ ] to select STEREO, then
press ENTER, the setting menu appears as
follow:
Press [ ] [ ] to turn STEREO on or off
then press ENTER.
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
40
5
Download from Www.Somanuals.com. All Manuals Search And Download.
08
Tuner
Before You Start
Scanning/Memorizing Stations
Automatically
Selecting Station Directly
Maintenance
2
Press GOTO button, the monitor shows:
FR:, input the number to receive the station
of this frequencies.
4
During radio status, you can press
AMS
button on the remote control to scan each
stored station 5 seconds respectively which
24
stored in Number Buttons (from 1 to 6).
You can press the corresponding Number
Buttons or AMS button when your desired
station is charged. And it starts playing that
station.
Replacing the Fuse
Note:
*
This function is only operated by using rem-
ote control.
Makesuretheamperagematchesthe
specifiedvaluewhenreplacingthefu-
ses.Ifthefuseisblown,checkthepo-
werconnectionandreplacewithan-
ewone.Ifthesameproblemoccurs,
itwouldbesubjectedtothemalfun-
ction.Insuchcases,pleaseconsult
tothenearestservicedealer.
Insert the Battery Holder into the Remote
Control.
4
When press and hold AMS button, it will
activate automatically memory storing fun-
ction. The radio automatically selects a
station and has it stored in any one of the
Number Buttons from 1 to 6.
Notes:
Press AMS on the head unit also performs
the same function.
The unit can be stored up to 6 stations for
each band.
Regarding the function of Number Buttons,
refer to Number Buttons for more inform-
ation.
*
*
*
!
Warning
Neverusethefusewiththerated
amperagemorethanthatsuppliedto
yourunit,otherwiseitwilldamagethe
unit.
PrecautionsonUsingLithium
Battery
Alwayskeepthelithiumbatterybeyond
children sreach.Incase
swallowed,seeadoctorimmediately.
Number Buttons
During radio mode, Number Buttons
Replacing the Battery
24
from 1 to 6
can help you store your
Cleaningthebatterywithadrycloth,
toensureitsperfectconnected.
favorite station. You can follow the steps
as below:
Whentherangeoftheoperationofthe
cardremotecontrolbecomesshortorno
functionswhileoperating.Replacethe
lithiumbatterywithanewbuttoncell
(CR2025).Makesurethebatterypolarity
beforereplace.
When receiving a station, press and hold
any one of the Number Buttons until CH i
(i=1~6) appears on the LCD, which in-
dicates that station is already stored in the
corresponding number button.
You can store up to 18 FM stations (6 each
for FM1,FM2,FM3),up to 12AM stations
(6 each for AM1/MW andAM2/LW).
Makesuretheproperpolaritywhen
loadingwiththebattery.
Topreventshortcircuit,donotuse
metaltweezertoclipthebattery.
!
Warning
Improperhandlewiththebattermay
leadtoexplosion.
Gently pull out the Battery Holder while
pressing the Stopper.
Note:
*
This function is only operated by using rem-
ote control.
Itcannotbecharged,disassembled
orthrownintoafire.
Putthebutton-typebatterywithmark(+)
upwardintotheBatteryHolder.
6
39
Download from Www.Somanuals.com. All Manuals Search And Download.
01
08
Tuner
Before You Start
Band Selector
DX/LOC Selector
Location of the Controls
3
During radio status, repeatedly press
BAND button to select bands in the
following order:
5
During radio status, press
LOC button on
the remote control to select strong or weak
station reception.
Front Panel
FM1
FM3
FM2
5
It is set to LOC mode when
LOC button
1
is first pressed. LO appears on the
display and only local station is available.
MW2(AM2)
MW1(AM1)
6
1
3
4
9 18 11
2
(For Two Bands)
5
It is switched to DX mode when
LOC
2
FM1
LW
(For Three Bands)
FM3
FM2
is pressed again. Both distance and local
stations can be received.
MW
Notes:
Note:
*
The initial mode is DX mode.
*
Press LOC on the head unit or set LOCAL
in RADIO MENU also performs the same
function.
8
*
Press
the same function.
button on the head unit also performs
Manual/Automatic Tuning
MO/ST Selector
22
or )button on the remote control con-
tinuously to select a station downward or
upward respectively.
Manual Tuning: Repeatedly pressing
(
6
During radio status, you can press
button on the remote control to select Mono
mode or Stereo mode.
ST
12
7 8 17 1415
5
1
Stereo reception is charged when ST
appears.
Base
Automatic Tuning: Press 22 ( or ) button
for more than 3 seconds, the radio automati-
cally searches a station downward or upward
respectively and plays when it finds a station.
2
It is switched to MONO mode when
MO appears.
Note:
13 10
16
19
Note:
*
To set STEREO in RADIO MENU also
performs the same function.
12
Press button on the head unit also performs
the same function.
*
On-screen display
Selecting the Station
8
Briefly press
OSD to show the RDS
22
to select the
to select the down-
During radio mode, press
upward station, press
ward station.
menu, press and hold it to display the
current source information.
Note:
Note:
*
This function is operated by using the remote
control.
*
First press AMS on the head unit , and then
12
press button on the head unit also performs
the same function.
38
7
Download from Www.Somanuals.com. All Manuals Search And Download.
07
IPOD
Before You Start
Exit IPOD
1 MOD/ button
Tracks Selector
10
RESET button
Press this button to turn on the unit,
when the unit on, briefly press it to
set mode, hold and press it to turn off.
Press to set the unit to initial status.
22
During IPOD mode, to take IPOD out, the
main unit will switch to radio mode.
During other mode, to take IPOD out, the
main unit will keep the original mode.
Press
to select the previous track,
press to select the next one, then press
ENTER to play.
11 EQ button
Briefly press it to select the different
frequency automatically.
Press to select the previous 5 tracks,
press to select the next 5 tracks, then press
22
2
(REL) button
Press to release the front panel.
ENTER to play.
2
12
/
button
Press
numbers to play the desired track.
GOTO to display : ---, input the
3 VOL button
During radio mode, press it to select
the stations; during playback mode,
press it to select tracks; during IPOD
mode press it to select the previous or
next 5 tracks.
Rotate (VOL) button clockwise to incr-
ease the volume level; and rotate(VOL)
button anticlockwise to decrease the
volume level. Briefly press it to set the
volume characteristics; press and hold
it to show the system menu;rotate it to
set the item.
Note:
12
button on the head unit also performs
*
Press
the same function.
13
EJECT button
Press it to eject the disc.
Back to Root Directory
4
LCD (LIQUID CRYSTAL DISPLAY)
To display current status.
4
During IPOD mode, press
back to the root directory.
Root to go
14 LOC button
During radio mode, press it to select
the distant or local station.
5
6
USB Socket
AMS button
Back to the Previous Directory
LOUD(loudness)button
15
5
During IPOD mode, press
to the previous directory.
to go back
Briefly press it to activate LOUD fun-
ction.
During radio mode, briefly press it to
adjust the storaged stations; press and
hold it to memory stations automatically.
First press it, then press
stations.
During playback, press it to activate the
repeat play function.
to select
/
16
17
18
Disc Loading Slot
A/V In
Video or Picture Mode
6
During IPOD mode, press
Video to
select video or audio. Video and picture can
be played at this time.
The unit and the remote control can not be
operated in this mode, you can just operate
IPOD to select video and picture.
MUT button
7
Infrared Sensor
Press it to switch the audio between
mobile phone and main unit.
8 BND/
(BAND/PAUSE,PLAY) button
During radio mode, press it to select
different bands.
Note:
19
SD Card Socket
*
*
This function is operated by using remote
control only.
During playback, press it to play or
pause play, press and hold to stop play.
The IPOD TV should be set ON in this
function.
9
/
(Stop/Mode display)
Briefly press it to stop playing; press
and hold it to select the day mode or
night one.
8
37
Download from Www.Somanuals.com. All Manuals Search And Download.
01
07
IPOD
Before You Start
Playing Tracks in Random Order
IPOD play
Card Remote Control
17
During IPOD playback, when pressing
RDM button, Shuffle off, Shuffle Track,
Shuffle Album will be activated.
During IPOD playback, connect the IPOD
wire(5V) to the one in backside of main unit.
The unit will play track in IPOD.
Note:
*
This function is operated by using the remote
control only.
Playing the Previous/Next Track
During IPOD playback, press
9
to play
to play the
9
the previous track, press
next track.
Pause the Playback
Note:
18
During playback, press
button to pause
*
This function is operated by using the remote
control only.
the playback, Press it again to return to nor-
mal playback.
Note:
Pressing
on the head unit also performs
8
*
Playing Track F.F/F.REW
the same function.
Press
or
to play the track fast for-
20
ward or fast rewind . Press it again or press
ENTER to resume to play normally.
On-screen display
Note:
8
During IPOD playback, hold and press
OSD button to display the current source
information.
*
This function is operated by using the remote
control only.
Note:
*
This function is operated by using the remote
control.
Repeat Playing
16
During playback, press
RPT to track
repeat, disc repeat, off. Press it again to
cancel this function.
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
Note:
Pressing AMS on the head unit also performs
*
the same function.
36
9
Download from Www.Somanuals.com. All Manuals Search And Download.
06
VCD/CD/MP3/MPEG-4/USB/SD
Before You Start
PWR (turn on/off) button
RPT (repeat play) button
RDM (play at random) button
(Play/pause) button
To Capture Picture
During MP3/USB/SD mode, when to scan
the picture, hold and press [P/N]/ bu-
tton to capture the current picture, and set it
to wallpaper
GOTO(time,track) button
BAND/TITLE (band selection/ title
menu) button
/
switch) button
(Stop play/ To display mode
Note:
AMS/MENU/Root (preset stations,
memory automatically/menu/back to
root directory) button
*
This function is operated by using remote
control only.
(F.REW/F.F) button
/
Exit an USB
LOC/
/SUB-T (long distant or local
SETUP (setup) button
station in radio mode/ back to last level
in IPOD mode/ subtitle display) button
During USB mode, the main unit would
switch to TUNER mode directly when exit
the USB.
During other modes, the main unit will keep
the previous mode when exit the USB.
ENTER(Left/Right/Up/Down
ENTER)
ST/AUDIO/Video (stereo or mono se-
lection/language or audio switch/ video
or audio switch in IPOD) button
CLEAR (clear)button
0~9 (number) button
MODE (mode switch) button
Note:
ANGLE (play angle) button
Please fill the rubber installs after exiting
USB .
OSD (current display) button
Briefly press it to display the current
information; press and hold it to display
the current setup.
LOUD(loudness) button
EQ (equalizer) button
Exit a SD Card
Push SD card to exit it.
During SD mode, the main unit would
switch to TUNER mode directly when exit
the SD.
During other modes, the main unit will keep
the previous mode when exit the SD.
(Previous/next track) button
/
ZOOM (briefly press it to zoom in or
out/ hold and press it to adjust video
display screen) button
(slow play) button
[P/N]/
button
(system adjustment/capture)
PROG (program play) button
(Mute) button
VOL+/VOL-/SEL (volume adjust/sound
characteristics setup) button
10
35
Download from Www.Somanuals.com. All Manuals Search And Download.
01
06
VCD/CD/MP3/MPEG-4/USB/SD
Before You Start
Program Playing
Number Buttons
During playback, you can select any track
Specifications
During VCD/CD mode, press 13 PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press 22 to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
directly by using
Number Buttons( 0~9).
24
The selected track will be played automati-
cally.
General
AM Tuner Section
Note:
Frequency Range
(Optional)
Power Requirement
14.4V DC
522-1620(KHz)
*
This function is operated by using remote
control only.
(11-16V allowable)
(Europe/Russia)
the cursor to
previous page; move the cursor to
press ENTER to the next page.
and press ENTER to the
and
Load Impedance
530-1710(KHz)
(U.S.A.)
Setting the Playback Time
2
Max.Power Output
Tone Controls
During CD playback, first press
GOTO,
80W X 4
During this process, press
or PROG
19
IF Range
450KHz
35dBuV
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons. Secondly press GOTO button,
track go to:--:-- appears on TFT, also input
your desired numbers to play the current
time of your selection.
to cancel the program playing.
10dB
Usable Sensitivity
(-20dB)
Note:
Bass100Hz
Treble10KHz
The function is only valid on remote control.
*
Approx.192x178x50
mm
(d/w/h)
Dimensions
Playing PBC (Menu)
During VCD mode, press 2 GOTO button
to set the playing time, when the TFT dis-
play : track/disc time/track time/repeat/time
CD Player Section
3
During VCD status, first pressing TITLE,
PBC playback starts and the menu of entire
disc appears on the monitor. And then you
can select your favorite track by using
24
Number Buttons. When a track is playing,
Approx.169X182X53
(d/w/h)
Mounting
Dimensions
mm
Approx.1.75kg
VCDSignalSystem
PAL/NTSC
disp. Press
press ENTER to set the status.Then press
[
][ ] to select the options,
24
Signal-to-noise Ratio
Separation
60dB
Weight
NUMBER BUTTONS or
the current status.
[
][ ] to set
55dB(1KHz)
0.1%
4
you can press MENU button to return to
the menu if you would like to end the track
and select others. To cancel PBC playing,
Distortion
2
During MP3/USB/SD mode, press GOTO
FM Tuner Section
first to display : ---/all track, input the
numbers to play the desired track. Press
second : --:-- to adjust the playing time.
3
press
TITLE button again.
2
DVD Player Section
Note:
This function is operated by using the remote
control.
87.5-108(MHz)
Tuning Range
(Optional)
*
*
(Europe)
During MPEG-4 mode, press GOTO first
to display : select:---, input the numbers to
play the desired track. Press GOTO seco-
ndly : time-:--:-- to adjust the playing time.
Numberofchannel
2 channels
87.5-107.9(MHz)
(U.S.A.)
PBC playing confirms to version 2.0 of SVCD/
VCD disc only.
Frequency Response
Dynamic Range
5Hz to 20,000Hz
98dB
65-74(MHz)
Russia)
Note:
*
This function is operated by using remote
control only.
Signal-to-Noise Ratio
Wow and Flutter
60dB
IF Range
10.7MHz
Less than
measurable limit
10dBuV
Usable Sensitivity
(-30dB)
MO/ST Selector
6
During VCD playing, repeatedly press
AUDIO button to select the mode as bellow:
Signal-to-noise Ratio
Stereo Separation
60dB
Note:
Mono right
Mono left
Stereo
30dB 1KHz
30-15000Hz
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
Note:
This function is operated by using the remote
control.
Frequency Response
*
34
11
Download from Www.Somanuals.com. All Manuals Search And Download.
06
02
VCD/CD/MP3/MPEG-4/USB/SD
Installation
Pause the Playback
Slow motion playback
Wiring Connection
9
18
11
During VCD mode, press
to slow
During playback, press
button to pause
IPOD link wire White +5V
3
4
Antenna
Black
Grey
forward or slow backward. There are such
speeds each pressing decreases the speed
until the minimum speed is reached.
the playback, Press it again to return to nor-
mal playback.
L white
Yellow
1
Front RCA Dark Grey
Video Out
Note:
R red
8
Yellow
Brown
*
Briefly press
button on the head unit also
L white
8
Subwoofer
Brown
performs the same function.
2
Light Grey
Rear RCA
Note:
Yellow
Yellow
7
Reversing Video In
R red
Brown
Black
Changing audio language
(Multi-audio)
L white
*
This function is operated by using the remote
control.
10
(Optional)
AUX In
Black
(Optional)
11
Video In
R red
MPEG-4 can provide audio playback with
different language. With discs featuring
Picture Sizes
10
During VCD/MPEG-4 mode, press
ZOOM to increase the picture in size.
There are such sizes as following:
6
multi-audio recordings,repeatedly press
AUDIO to switch between language and
audio systems during playback.
5
7
2X
3X
4X
6
Selection options switch as follows:
NoChange
AUDIO 1
AUDIO 2
AUDIO 3......
Note:
Note:
*
*
This function is operated by using the remote
control.
*
This function is operated by using the remote
control.
This function only operates with MPEG-4
Orange
Reverse Gear
Ignition Key
22
To perform this function with the
button.
Red
Yellow
Black
*
featuring multi-audio recordings.
FILTER
&FUSE
BOX
Brown
Blue
On-screen display
Parking Brake
Battery +
Ground
2
*
The number in the
mark on a MPEG-4
8
8
During VCD/CD playback, briefly press
OSD, the monitor shows:
package indicates the number of recorded
languages/audio systems.
Antenna
Power +
Single elapsed time
Single remain time
Violet/Black
Violet
Green/Black
Green
Rear L
Speaker
Rear R
Speaker
File Selector
Total
elapsed time
Total
remain time
OFF
During MP3/MPEG-4/USB/SD stop mode,
press to select file or file document. Press
22
ENTER to open it.
Grey/Black
Grey
During MPGE-4 playback, briefly press
OSD, the monitor shows:
White/Black
White
Front R
Speaker
Front L
Speaker
Single
elapsed time
Single
remain time
Note:
This function is operated by using the remote
control.
*
Reversing Video In
Subwoofer
1
2
3
4
5
6
7
8
Front RCA
Rear RCA
Antenna
OFF
Press and hold this button to display the
current source information.
Eject a Disc
9
IPOD link wire
Note:
2
First press , then press
eject a disc.
13
button to
*
This function is operated by using the remote
control.
10
11
Video Out
AUX In (Optional)
Video In (Optional)
Notes:
Output Plug (Male)
This function can only be operated by the head
unit.
*
Output Socket (Female)
12
33
Download from Www.Somanuals.com. All Manuals Search And Download.
02
06
VCD/CD/MP3/MPEG-4/USB/SD
Installation
System Button
Playing Discs/USB/SD
Install the Front Panel
12
During VCD playback, press P/N button
to select standard TV system as following:
While playing discs, just insert a disc (with
labeled side up) into the (Disc Loading Slot)
(Shown as picture), the mechanism will
automatically switch on. If a disc is loaded,
(REL)
button in the upper right
Put notch (Shown as picture) onto
Press 2
AUTO
NTSC
A
shaft B . And then slightly press into the
corner, and then the front panel will be
PAL
9
briefly press MODE button to start the
playing.
right side.
folded down.
Note:
When playing USB, first unstop the rubber
plug, then insert USB in USB socket, the
mechanism will automatically play.
REL
*
This function can be operated by selectiong
the DVD MENU SETUP.
B
2
When playing SD Card, first press
REL
Repeat Playing
to release the front panel, then insert a SD
card into the slot, the programs in the card
will be played.
16
During playback , press
the current track. Press it again to cancel
this function.
RPT to replay
A
Note:
Pressing MOD on the head unit also performs
the same function.
Note:
Pressing AMS on the head unit also performs
the same function.
The default setting is Disc Repeat.
*
*
When the front panel was turned down
to a position of 45 , hold and slide the
front panel to left, and then pull it out .
Playing the Previous/Next Track
DuringMP3/USB/MPEG-4/SD playback,
9
toplaythenexttrack.
Playing Tracks in Random Order
press
9
toplaytheprevioustrack,press
During VCD/CD/MP3/MPEG-4/SD play-
17
9
DuringVCD/CDplayback,firstpress
toreturntothebeginningofthecurrenttrack,
press 9 againwithin3secondstoplay
back, when press
RDM button , the unit
plays any track at random under the direct-
ory which you select. Press RDM again to
return to normally play.
previoustrack,press 9
toplaynexttrack.
Note:
Note:
*
This function is operated by using the remote
control only.
12
*
Briefly press
button on the head unit also
performs the same function.
Stop the playback
Playing Track F.F/F.REW
DuringMP3/MPEG-4/USB/SD mode,press
19
tostopplaying,pressitagaintoreturn
tothebeginningofthecurrenttrack.
Press
or toplaythetrackfastforward
20
orfastrewind:Eachpressing,willchange as
following:
19
DuringVCD/CDmode,first pressing
to pauseplaying,press 18 toplay,press
buttontwicetostopplayingcompletely,press
PLAYbuttontostartplaying.
2X
4X
8X
16X
Note:
Never put any objects into the front panel.
Note:
Note:
8
*
Press and hold
button on the head unit also
12
Press and hold button on the head unit also
performs the same function.
*
performs the same function.
32
13
Download from Www.Somanuals.com. All Manuals Search And Download.
05
02
DVD
Installation
Installation Method
DIN Front-Mount
1
---Preferencespage--
Default
Exampleshowinghowtosetloadfactorysetting:
Bend these claws
outward for a tight fit,
if necessary.
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Reset
GoToPreferencePage
LoadFactorySetting
Fire Wall
To support the unit
2
Installation Method
Installation using the screw holes at the
sides of the unit.
Bracket ssupplied
to youur car
1. Remove the hooks on both sides.
2. Select a position where the screw holes
of the mounting bracket supplied with
the car and the screw holes of the main
unit become aligned (are fitted), and
4
tighten the screws (see
at 2 places
on each side. And then fasten them to
the car.
Dashbboard
or Connsole
NOTE:
5
Outer Trim Frame Hook 9 and
Mounting Sleeve are not used for installa-
1
2
tion method
14
31
Download from Www.Somanuals.com. All Manuals Search And Download.
02
05
DVD
Installation
---Preferencespage--
Detach the Unit
DiscMenu
ExampleshowinghowtosetDiscMenuLanguage:
2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrat-
ed) until they click. Pulling the keys
makes it possible to remove the unit from
the dashboard.
Detach the front panel before disassembl-
ing the unit. For more details regarding
this section, refer to Detach the Front
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
Panel
.
TVType
Audio
Auto
Eng
Eng
Eng
English
TVType
Audio
Auto
Eng
1.Take out the Outer Trim Frame after
detaching the front panel.
French
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
GoToPreferencePage
PreferredMenuLanguage
Parental
Exampleshowinghowtosetparentalcontrol:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
R
NC 17
Adult
MainPartsList
GoToPreferencePage
SetParentalControl
Password
Exampleshowinghowtosetpassword,and thedefaultpasswordis8888.
M 5 x 5
Mounting Sleeve x1 Rear Mounting Bolt x1
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
Harness Rubber x1 4 Screws
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Change
Keys x 2
Connecting Wire x1
Steel Bar x 1
Outer Trim Frame x 1
GoToPreferencePage
ChangePassword
30
15
Download from Www.Somanuals.com. All Manuals Search And Download.
05
02
DVD
Installation
---Preferencepage---
Cleaning the Connector
TVType
ExampleshowinghowtosetTVtype:
(Press
If the connector between the main unit and the
front panel is dirty, it may result in unit s ab-
normal working condition. To avoid such pro-
blems happening, please detach the front panel,
and clean the connector with an alcohol swab.
Gently clean and avoid damaging the connector.
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
TVType
Audio
Auto
Eng
PAL
Auto
NTSC
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
The main unit
GoToPreferencePage
SetTVStandard
Audio
ExampleshowinghowtosetAudiolanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
English
TVType
Audio
Auto
Eng
French
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
GoToPreferencePage
PreferredAudioLanguage
The backside of the front panel
Notes:
Subtitle
Exampleshowinghowtosetsubtitlelanguage:
(Press
,
or ,thenpressENTER)
--PreferencePage--
(Press
*
For safekeeping, always shut down the generator
and take out the key from the ignition before cle-
aning.
--PreferencePage--
TVType
Audio
Auto
Eng
Eng
Eng
English
TVType
Audio
Auto
Eng
French
Never keep your finger or any metal device touch
the connector directly.
Subtitle
DiscMenu
Parental
Password
Default
Subtitle
DiscMenu
Parental
Password
Default
Eng
Eng
Spanish
Chinese
Japanese
Korean
Russian
Others
GoToPreferencePage
PreferredsubtitleLanguage
16
29
Download from Www.Somanuals.com. All Manuals Search And Download.
03
05
Common Operations
DVD
Reset the Unit
Setting the Sound Characteristics
15
--DolbyDigitalSetup--
Repeated pressing SEL button to select
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
the desired mode in the following order:
VOL
BAL
FAD
TRE
BAS
DualMono
Exampleshowinghowtosetstereomode:
(Press
Release the front panel at first, and then
Press 10 RESET button on the base with
a pointed object, (such as a ballpoint pen)
to set the unit to initial status.
,
or ,thenpressENTER)
--DolbyDigitalSetup--
(Press
1
2
After selecting the desired mode, you
can adjust the current level by pressing
--DolbyDigitalSetup--
DualMono
Dynamic
DualMono
Dynamic
Stereo
Note:
15
VOL buttons.
L-Mono
R-Mono
Mix-Mono
* When some errors occur on the display, you can
also press RESET button to resume to normal,
and it will erase the clock setting and some me-
morized functions.
,
If you dont adjust
15
VOL buttons wi-
thin 3 seconds after selecting the desired
mode, the unit will automatically return
to the current mode being displayed.
*
This function can only be operated by the
head unit.
GoToDolbyDigitalSetup
DualMono(1+1)Setup
Note:
Turning the Unit On/Off
*
Pressing SEL and rotating VOL button on the
head unit or set AUDIO SETUP in MAIN
MENU also performs the same function.
1
Press PWR button to turn on the unit,
press it again, the unit is still in the waiting
status. When insert a disc, the unit will au-
tomatically start playing. Keep pressing it
to turn off the unit completely.
Dynamic
Exampleshowinghowtosetdynamicrangecompression:
EQ Setting
(Press
,
or ,thenpressENTER)
--DolbyDigitalSetup--
(Press
While listening to the popular music, classic
music or rock music, you can select the co-
rresponding preset modes to adjust the sound
--DolbyDigitalSetup--
Note:
*
During waiting status, briefly press PWR on
the head unit to turn on the unit, press and hold
it to turn off the unit.
DualMono
Dynamic
DualMono
Dynamic
quality perfectly by using
EQ button.
27
EQ button to choose
the following modes in turn:
3
1
1
4
2
4
27
Repeatedly pressing
Volume Control
POP
CLAS
FLAT
ROCK
GoToDolbyDigitalSetup
SetDRCoff
Press 15 VOL+ button to increase the sou-
nd level and press 15 VOL- button to decr-
ease the sound level.
Note:
Note:
*
Press and hold EQ on the head unit also
performs the same function.
* Rotating VOL on the head unit also performs
the same function.
28
17
Download from Www.Somanuals.com. All Manuals Search And Download.
05
03
Common Operations
DVD
Turning Loudness On/Off
Night Mode
--GeneralSetupPage--
19
26
Hold and press
button to enter the
Witheout bluetooth, briefly press
LOUD
night mode, press it again to switch to the
normal mode. During night mode, to turn
off the blue screen and weeken the button
light.
on the remote control to activate LOUD
function. You can press this button to incr-
ease the low frequcan improve sensitivity
for your ears. And LOUD ON appears.
Press it again to shut down this function,
and LOUD OFF appears.
Captions
Exampleshowinghowtosetcaptionson/off:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
--GeneralSetupPage--
Note:
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
*
This function is operated by using the remote
control only.
Note:
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
*
Without bluetooth, briefly press LOUD on
the head unit or set LOUDNESS in MAIN
MENU also performs the same function.
On
Off
ScreenSaver
LogoType
ScreenSaver
LogoType
Mode Selector
Def
Def
25
Press MODE button to select the different
modes available.
GoToGeneralSetupPage
ClosedCaptions
Note:
Mute Function
14
Press
output and
resume to previous volume level.
button to shut off the sound
appears. Press it again to
*
Briefly press MOD on the head unit also
performs the same function.
ScreenSaver
ExampleshowinghowtosetScreenSaveron/off:
Display Mode
During video playback, press and hold
ZOOM button to select 4:3 display mode,
press and hold it again to display the previous
one.
Note:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
10
*
Press MUT on the head unit performs the same
function.
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
CLEAR
23
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
Note:
Press
CLEAR to clear the mistake input.
*
To set this function by WIDE in MAIN MENU.
ScreenSaver
LogoType
ScreenSaver
LogoType
On
Off
Def
Def
Note:
GoToGeneralSetupPage
ScreenSaver
*
This function is operated by using the remote
control only.
Infrared Sensor:
7
remote commander.
Receptor
on the head unit for the card
Force Disc Out
LogoType
ExampleshowinghowtosetLogoType:
A/V In
During playback, when a disc was locked or
can not eject, press MODE on the head unit
to switch to the radio mode then hold and
press the button 3 seconds,that disc can
be forced out.
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
You can input the audio or video frequency
into the main unit to increase the volume
through A/V In.
--GeneralSetupPage--
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
Release the front panel
ScreenSaver
LogoType
ScreenSaver
LogoType
2
Press
REL to release the front panel.
Def
Def
Default
Captured
Note:
* This function is operated by the head unit only.
GoToGeneralSetupPage
LogoType
18
27
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DVD
Main Menu
1.Audio Adjust
--GeneralSetupPage--
Set up Main Menu
After Selecting AUDIO, press ENTER to
enter the setting system:
Press and hold SETUP on the remote control
or MENU on the head unit , the setting pic-
ture appears as follow:
TVDisplay
ExampleshowinghowtosetTVDisplaymode:
(Press
AUDIO SETUP
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
BALANCE
FAD
BASS
TREBLE
EQUALIZER
LOUDNESS
BACK
00
00
00
00
FLAT
OFF
--GeneralSetupPage--
MAIN MENU
TVDisplay
AngleMark
TVDisplay
AngleMark
Normal/PS
Normal/LB
Wide
On
Wide
On
AUDIO
VIDEO
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
Wide
SOURCE SEL
PREFERENCE
EXIT
ScreenSaver
LogoType
ScreenSaver
LogoType
Def
Def
GoToGeneralSetupPage
SetTVDisplaymode
You can adjust BALANCE, FAD, BASS
TREBLE, EQUALIZER,LOUDNESS,
press [ ] or BACK then press ENTER to
go back to the previous menu.
For example, press [ ] [ ] to select BASS,
the setting menu will appear as follow:
The main menu includes 5 selections above,
press or button to select the requisite it-
em, then hit ENTER to set it; press or
button to reach EXIT, press ENTER to
exit setting.
AngleMark
Exampleshowinghowtosetpicturemode:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
Note:
--GeneralSetupPage--
* Buttons of [ ] [ ] [ ] [ ]/ENTER are
on the remote control.
AUDIO SETUP
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
On
BALANCE
FAD
BASS
00
00
00
* Rotate and press VOL button on the head unit
performs the same function.
Off
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
ScreenSaver
LogoType
ScreenSaver
LogoType
TREBLE
00
FLAT
OFF
Def
Def
EQUALIZER
LOUDNESS
BACK
GoToGeneralSetupPage
SetAngleMark
Press [ ] [ ] to increase or decrease the
size, and then press ENTER. Press [ ] to
go back to the previous menu.
OSDLang
Exampleshowinghowtosetlanguagemode:
(Press
,
or ,thenpressENTER)
--GeneralSetupPage--
(Press
Note:
--GeneralSetupPage--
* Adjusting the other items perform the same
operation.
TVDisplay
AngleMark
TVDisplay
AngleMark
Wide
On
Wide
On
OSDLang
Captions
Eng
Off
On
OSDLang
Captions
Eng
Off
On
English
ScreenSaver
LogoType
ScreenSaver
LogoType
Def
Def
GoToGeneralSetupPage
SetOSDLanguage
26
19
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
DVD
Main Menu
Changing audio language
(Multi-audio)
Selecting Different Menu/Title
EQUALIZER
2.Video Adjust
Press[ ]or [ ] to select EQUALIZER,
then press ENTER, the setting menu
appears as follow:
Selecting VIDEO in main menu, press
ENTER to enter setting system.
Under DVD playback mode, press 4 MENU
DVDs can provide audio playback with
different language. With DVDs featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
3
the title menu, the monitor display all the
or
TITLE to return to the root menu or
6
chapters or all titles. You can press and
22
24 Number Buttons on the remote co-
ntrol to select different chapter or title.
VIDEO SETUP
AUDIO SETUP
BRIGHT
30
BALANCE
FAD
BASS
TREBLE
EQUALIZER
LOUDNESS
BACK
00
00
00
00
CONTRAST 30
Selection options switch as follows:
COLOR
HUE
WIDE
30
Note:
30
WIDE
AUDIO 1
AUDIO 2
AUDIO 3......
*
This function is operated by using the remote
control.
FLAT
OFF
DEFAULT
BACK
STANDARD
Note:
*
This function is operated by using the remote
control.
This function only operates with DVDs fea-
The main menu includes items above.
Press or BACK and then press ENTER
to go back to the previous menu.
SET UP MENU
Press [ ] [ ] to select your desired item,
*
21
During DVD playback, press SETUP ,
the screen will display system setting pic-
ture, the user can select some relative con-
stant parameters. The user also can set it as
then press ENTER, press
the previous menu.
to go back to
turing multi-audio recordings.
2
*
The number in the
mark on a DVD's
package indicates the number of recorded
languages/audio systems.
Image Adjust
LOUDNESS
22
needed by moving the cursor and using
Adjusting the CONTRAST : press[ ]or
[ ] to select CONTRAST, then press
ENTER, the setting menu appears as
[
][ ][ ][ ] buttons, and then press
22
Press[ ]or [ ] to select LOUDNESS,
then press ENTER, the setting menu
appears as follow:
ENTER to execute the selecting or enter-
ing item.
Changing the subtitle language
(Multi-subtitle)
follow:
Press [ ][ ][ ] to move the cursor on
then press ENTER to exit the menu
AUDIO SETUP
VIDEO SETUP
X
setup.
With DVDs featuring multi-subtitle recor-
5
dings. You can press SUB-T to switch
between subtitle languages during playback.
BALANCE
FAD
BASS
TREBLE
EQUALIZER
LOUDNESS
BACK
00
00
00
00
FLAT
OFF
BRIGHT
30
Note:
CONTRAST 30
*
The selections are the preferred options that
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own pre-
ference will be used.
COLOR
HUE
WIDE
30
Selection options switch as follows:
30
WIDE
......
Subtitles 1
Subtitles 2
Subtitles OFF
DEFAULT
BACK
STANDARD
*
*
Regarding SETUP MENU, please refer to
the following pages for more details.
Note:
Press [ ] [ ] to select your desired item,
then press ENTER, press
the previous menu.
*
This function is operated by using the remote
control.
Some functions varies depending on the types
of models or formats of the disc.
Press [ ] [ ] to increase or decrease the
size, and then press ENTER. Press [ ] to
go back to the previous menu. Adjusting
the other items perform the same operation.
to go back to
*
This function only operates with DVDs fea-
turing multi-subtitle recordings.
2
*
The number in the
mark on a DVD's
package indicates the number of recorded
subtitle languages.
20
25
Download from Www.Somanuals.com. All Manuals Search And Download.
04
05
DVD
Main Menu
3.Source Setup
Number Buttons
WIDE
Setting the Playing Time
Press[ ]or [ ] to select WIDE, then press
ENTER, the setting menu appears as follow:
24
Selecting SOURCE SEL by pressing
in main menu, press ENTER to enter
setting system.
2
press
Number Buttons to input the
During DVD mode, press
GOTO button
desired tracks, then it will be played auto-
matically.
to set the playing time, when the TFT dis-
play : title/chapter/audio/subtitle/angle
/title time/chapter time/repeat /time disp.
][ ] to select the options, press
ENTER to set the status.Then press 24NU-
VIDEO SETUP
Note:
2
2
Press
[
SOURCE SEL
BRIGHT
30
*
This function is operated by using the remote
control.
RADIO
USB
ON
ON
ON
ON
ON
ON
ON
CONTRAST 30
MBER BUTTONS or
current status.
2
2
[
][ ] to set the
COLOR
HUE
30
SD
30
DISC
IPOD
AV-R
AV-F
WIDE
WIDE
Repeat Playing
Note:
DEFAULT
BACK
STANDARD
*
This function is operated by using the remote
control.
16
Repeatedly repeatedly press
remote control to replay as following:
RPT on the
Press [ ] [ ] to select your desired item,
BACK
Chapter
Title
then press ENTER, press
the previous menu.
to go back to
Changing the viewing angle
(Multi-angle)
Off
This menu can set up the above items by
pressing [ ] and [ ] and ENTER.
If you set one of them OFF, the function
is invalid. For example, if one item set OFF
pressing SOURCE button can not activate
it. During playback mode, you can not
set it OFF.
Note:
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
*
*
Press AMS on the head unit also performs
the same function.
Default
7
can press
viewing angles during playback.
ANGLE to switch among
The default setting is DISC REPEAT.
Adjusting the DEFAULT : press[ ]or [
to select DEFAULT, then press ENTER,
the setting menu appears as follow:
]
Selection options switch as follows:
On-screen display
8
During DVD playback, briefly press OSD,
the monitor shows:
ANGLE 1
ANGLE 2
ANGLE 3 ......
VIDEO SETUP
Note:
BRIGHT
30
Title elapsed time
Title remain time
Chapter
CONTRAST 30
*
*
This function is operated by using the remote
control.
Chapter
remain time
OFF
COLOR
HUE
WIDE
30
elapsed time
30
WIDE
This function is only operated by DVD with
multi-angle recordings.
Press and hold this button to display the
current source information.
DEFAULT
BACK
STANDARD
3
*
This
mark on a DVD package indicates
it features multi-angles scenes,
The number in the mark indicates the
number of angles from which scenes were slot.
Note:
3
*
This function is operated by using the remote
control.
The main menu includes selections above,
after selecting any one of them, DEFAULT
will switch to USER.
press or button to adjust item, then press
ENTER.
Press to go back to the previous menu.
*
If you press ANGLE during fast forward/fast
reverse or pause, fast forward/fast reverse or
pause is canceled and normal playback resumes
but the viewing angle does not change.
24
21
Download from Www.Somanuals.com. All Manuals Search And Download.
05
04
DVD
Main Menu
4.PREFERENCE SETUP
Select PREFERENCE, thenpress ENTER.
Basic operation of DVD
Slow motion playback
Clock Adjust
11
Press
to slow forward or slow back-
Insert a DVD disc into the slot,the unit will
automatically switch on, if a DVD disc is
PREFERENCE
ward. There are such speeds each pressing
decreases the speed until the minimum
speed is reached.
CLOCK SYS 24 HOUR
CLOCK ADJ 00:00:00
PREFERENCE
25
loaded, press
MODE on the remote
control to switch to DVD mode to start the
playback.
CLOCK SYS 24 HOUR
CLOCK ADJ 00:00:00
KEY BEEP
ON
REV POLA
BACK
BATTERY
Note:
KEY BEEP
ON
*
Pressing MOD button on the head unit also
performs the same function.
Note:
REV POLA
BACK
BATTERY
*
This function is operated by using the remote
control only.
Setting CLOCK ADJ in this menu,Press
] and [ ] and ENTER.Press to go
back to the previous menu.
[
This menu can set up the above items by
pressing [ ] and [ ] and ENTER.
Press or BACK, then press ENTER to
go back to the previous menu.
Playing the Previous/Next Track
System Button
9
DuringDVDplayback,firstpress
returntothebeginningofthecurrenttrack,
press againwithin3secondstoplay
to
12
During DVD playback, press P/N button
to select standard TV system as following:
KEY BEEP
9
PREFERENCE
9
previoustrack,press
toplaynexttrack.
AUTO
NTSC
Clock System
CLOCK SYS 24 HOUR
CLOCK ADJ 00:00:00
PAL
Note:
PREFERENCE
Note:
12
button on the head unit
also performs the same function.
*
Briefly pressing
KEY BEEP
ON
CLOCK SYS 24 HOUR
CLOCK ADJ 00:00:00
*
This function can be operated by selecting
the DVD MENU SETUP.
REV POLA
BACK
BATTERY
KEY BEEP
ON
Playing Track F.F/F.REW
Increase the size of the picture
REV POLA
BACK
BATTERY
Setting KEY BEEP ON or OFF in this menu,
the default setting is ON. Press [ ] and
Press
or toplaythetrackfastforward
20
10
ZOOM to increase the
Briefly press
orfastrewind:Eachpressingwill change as
following:
[ ] and ENTER.
Press to go back to the previous menu.
picture in size. There are such sizes as
following:
Setting CLOCK SYSTEM in this menu,
according to the desired setting 12 HOUR
or 24 HOUR.Press [ ] and [ ] and ENTER.
2X
3X
4X
2X
4X
8X
16X
REVERSE POLA
NoChange
Press
to go back to the previous menu.
Press and hold it to display NORMAL(4:3),
WIDE(16:9).
PREFERENCE
Note:
12
button on the head unit also
*
Press and hold
performs the same function.
CLOCK SYS 24 HOUR
CLOCK ADJ 00:00:00
Note:
*
*
This function is operated by using the remote
control.
To remove the image by pressing22 button.
KEY BEEP
REV POLA
BACK
ON
BATTERY
Stop the playback
DuringDVDmode,first pressing
18
to
19
toplay,press
Pause the playback
pauseplaying,press
Setting reverse pola in this menu, The signal
is +12V when you back a car, please set
BATTERY; if the signal is 0V, please set
GROUND.Press [ ] and [ ] and ENTER.
Press to go back to the previous menu.
18
pauseandplaymode, duringstopmode,
DuringDVDmode,press
toswitch
buttontwicetostopplayingcompletely,press
PLAYbuttontostartplaying.
pressitagaintoresumetotheplaybackmode.
Note:
Note:
8
*
Press and hold
button on the head unit also
8
*
Briefly press
button on the head unit also
performs the same function.
performs the same function.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|