Specifications & Capacities
Post Hole Diggers
HD25 and HD35 Hydraulic Series
HD25
HD25
HD35
HD35
(3-Point)
(Bucket Mount)
(3- Point)
(Bucket Mount)
Hydraulic Hoses
Standard
109 RPM
Optional
Standard
109 RPM
Optional
Maximum Auger RPM
Gallons Per Minute Rating
Max torque @ 2500 PSI
Weight with 6” Auger
Auger Length
105 RPM
105 RPM
5 -12 GPM @ 1500 to 3000 PSI
700 ft. lbs.
10 -25 GPM @ 1500 to 3000 PSI
1605 ft. lbs.
235 lbs.
185 lbs.
235 lbs.
189 lbs.
48”
1/4”
Auger Flighting Thickness
Auger Pipe
2 1/2” dia.
Auger Teeth
Forged, Individually Replaceable
40 Degree Angle Installed on Flat Side
50 Degree Angle Installed on Angled Side
Number of Teeth
(6” - 2 teeth) (9” & 12” - 4 teeth) (15” - 5 teeth) (18” - 6 teeth) (24” - 8 teeth)
Pilot
Cast steel, 3 drill points
Hydraulic
Auger Drive
Gearbox
3.18:1 Ratio
Output Shaft on Gearbox
2” O.D. Round
Hitch
Yoke
Cat I or II
2 7/8” Tubing
Bucket Mount
Not Applicable
Not Applicable
Cat I or II
2 7/8” Tubing
Bucket Mount
Not Applicable
Not Applicable
Boom
Reinforced Tubing
Reinforced Tubing
Options and Accessories
Auger Sizes
6”, 9”, 12”, 15”, 18” or 24”
Hydraulic Hoses
Not Applicable
(2)-24 ft. long hoses
Not Applicable
Not Applicable
Available
(2)-24 ft. long hoses
Not Applicable
Hydraulic
Down Pressure Kit
Available
Storage Stand
Available
Not Applicable
Available
Not Applicable
Auger Extensions
7” and 14” Extensions Available
Designs, specifications, features and information are subject to change without notice.
52
2/03/09
317-076S continued on next page
Download from Www.Somanuals.com. All Manuals Search And Download.
|