Lumens Technology Camera Accessories PC170 User Manual

PC170  
Document Camera  
User Manual - English  
[Important]  
To download the latest version of Quick Start  
Guide, multilingual user manual, software, or  
driver, etc., please visit Lumens  
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English - 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright Information  
Copyrights © Lumens Digital Optics Inc. All rights reserved.  
Lumens is a trademark that is currently being registered by Lumens Digital Optics Inc.  
Copying, reproducing or transmitting this file is not allowed if a license is not provided by  
Lumens Digital Optics Inc. unless copying this file is for the purpose of backup after  
purchasing this product.  
In order to keep improving the product, Lumens Digital Optics Inc. hereby reserves the right  
to make changes to product specifications without prior notice. The information in this file is  
subject to change without prior notice.  
To fully explain or describe how this product should be used, this manual may refer to  
names of other products or companies without any intention of infringement.  
Disclaimer of warranties: Lumens Digital Optics Inc. is neither responsible for any possible  
technological, editorial errors or omissions, nor responsible for any incidental or related  
damages arising from providing this file, using, or operating this product.  
English - 3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Safety Instructions  
Always follow these safety instructions when setting up and using the Document Camera:  
1. Do not place Document Camera in tilted position.  
2. Do not place the Document Camera on an unstable trolley, stand or table.  
3. Do not use the Document Camera near water or source of heat.  
4. Use attachments only as recommended.  
5. Use the type of power source indicated on the Document Camera. If you are not sure  
of the type of power available, consult your dealer or local electricity company for  
advice.  
6. Place the Document Camera on a place that it can be unplugged easily.  
7. Always take the following precautions when handling the plug. Failure to do so may  
result in sparks or fire.  
Ensure the plug is free of dust before inserting it into a socket.  
Ensure that the plug is inserted into the socket securely.  
8. Do not overload wall sockets, extensions leads or multi-way plug boards as this may  
cause fire or electric shock.  
9. Do not place the Document Camera where the cord can be stepped on as this may  
result in fraying or damage to the lead or the plug.  
10. Unplug the Document Camera from the wall socket before cleaning. Use a damp  
cloth for cleaning. Do not use liquid or aerosol cleaners.  
11. Do not block the slots and openings in the Document Camera case. They provide  
ventilation and prevent the Document Camera from overheating. Do not place the  
Document Camera on a sofa, rug or other soft surface or in a built-in installation  
unless proper ventilation is provided.  
12. Never push objects of any kind through cabinet slots. Never allow liquid of any kind  
to spill into the Document Camera.  
13. Except as specifically instructed in this User Manual, do not attempt to operate this  
product by yourself. Opening or removing covers may expose you to dangerous  
voltages and other hazards. Refer all servicing to licensed service personnel.  
14. Unplug the Document Camera during thunderstorms or if it is not going to be used for  
an extended period. Do not place the Document Camera or remote control on top of  
heat-emitting equipment or heated objects such as a car, etc.  
15. Unplug the Document Camera from the wall outlet and refer serving to licensed  
service personnel when the following situations happen:  
If the power cable or plug becomes damaged or frayed.  
If liquid is spilled into it or the Document Camera has been exposed to rain or  
water.  
<Note> Using an incorrect battery type in the remote control may result in  
breakdown. Follow your country’s instructions on how to dispose of used batteries.  
English - 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Precautions  
Warning: To reduce the risk of fire or electric shock, do not expose this appliance to  
rain or moisture.  
This Document Camera has a 3-wire AC line Plug. This is a safety feature to ensure that  
the plug will fit into the power outlet. Do not try to disable this safety feature.  
If the Document Camera will not be used for an extended time, unplug it from the power  
socket.  
Note  
Risk of Electric Shock  
Caution: To reduce the risk of electric shock, do not remove cover (or back). No  
user-serviceable parts inside. Refer servicing to licensed service personnel.  
This symbol indicates that  
this equipment may contain  
dangerous voltage which  
could cause electric shock.  
This symbol indicates that  
there are important operating  
and maintenance  
instructions in this User  
Manual with this unit.  
FCC Warning  
This Document Camera has been tested and found to comply with the limits for a Class A  
digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation.  
EN55022 (CE Radiation) Warning  
This product is intended for use in a commercial, industrial, or educational environment. It  
is not intended for residential use.  
This is a Class A product. In a residential environment it may cause radio interference, in  
which case the user may be required to take adequate measures. The typical use is in a  
conference room, meeting room or auditorium.  
English - 5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Package Contents  
PC170  
Quick Start Guide  
4-Steps Card  
(For download of other  
language versions, please  
visit Lumens website)  
VGA Cable  
USB Cable  
Power Cord  
Appearance may vary  
depending on country/region  
Remote Control  
Remote Control Holder  
Microscope Adapter  
Accessory Pouch  
English - 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 3 Product Overview  
1. Gooseneck  
2. AF button  
3 Lamp  
4. Control panel  
5. LED indicator  
6. Built-in Microphone  
7. Remote sensor  
8. Lens  
9. LED lamp  
10. DIP Switch Settings  
(Bottom)  
English - 7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3.1 Relative position of the presenter and document  
English - 8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 4 Installation and Connections  
4.1 System diagram  
Earphone or  
Speaker  
Projector or Monitor  
SD Card  
Computer  
TV  
English - 9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Monitor or HDTV  
4.2 Installation and setup  
1.  
Please set up the DIP Switch Settings first. Refer to Chapter 9 DIP Switch  
Settings in the DC190 User Manual.  
4.3 Connecting to a projector or monitor  
VGA Cable  
Power Cord  
Monitor or  
Projector  
AC Outlet  
English - 10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4.4 Connecting to a computer and use Lumens™ software  
USB Cable  
Projector  
Power Cord  
VGA Cable  
Computer  
AC Outlet  
Driver and software can be downloaded from Lumens website  
4.5 Connecting to a computer and projector or monitor  
simultaneously  
VGA Cable  
VGA Cable  
Power Cord  
AC Outlet  
Monitor or  
Projector  
Computer  
Press [SOURCE] button to switch the image source.  
English - 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4.6 Connect to a PC and read the SD card  
SD Card  
USB Cable  
Power Cord  
AC Outlet  
Computer  
<Note> Connected to a computer and turned off, the Document Camera is just  
regarded as an external storage device.  
4.7 Connecting to an Interactive Whiteboard (IWB)  
Projector  
USB Cable  
VGA Cable  
Power Cord  
USB Cable  
Computer  
AC Outlet  
English - 12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4.8 Connecting to an HDTV  
Power Cord  
HDMI Cable  
AC Outlet  
HDTV  
4.9 Connecting to a speaker  
Power Cord  
AC Outlet  
Earphone or Speaker  
English - 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4.10 Connecting to a Computer with RS232  
EXTENDER  
Adapter  
Power Cord  
RS232 Adapter  
AC Outlet  
Computer  
After connecting to the RS232 cable, you can use RS232 commands to control  
PC170.  
4.11 Connecting to a TV  
DIP Switch Settings  
EXTENDER  
Adapter  
Power Cord  
C-Video Cable  
AC Outlet  
NTSC: USA, Canada, Mexico, Panama, Chile, Japan, Taiwan, Korea, and  
English - 14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Philippines.  
PAL: Countries/regions not listed above.  
<Note> You should unplug and reconnect the power cord, and then restart the  
machine for DIP Switch Settings to take effect. Once C-VIDEO is on, VGA OUT is  
not supported.  
<Note> Only the live image can be displayed in C-Video Out mode.  
4.12 Installing application software  
The application software installed on the computer enables you to:  
Control the PC170.  
Capture and record images.  
Annotate the image, highlight important details and save it.  
Support the full screen function.  
<Note> Please refer to Podium View™ software user manual for installation steps  
and software operation.  
English - 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 5 Start Using  
1. Place an object to be displayed under  
the camera.  
2. Turn on Power  
.
3. Adjust the gooseneck and lens to the  
appropriate positions.  
4. Press [AUTO TUNE]  
button to  
optimize the image. You are ready to  
teach/present.  
Each time the camera head is moved,  
please locate it and then press  
[FOCUS] to refocus the lens.  
When using the remote control, aim at the remote sensor on the PC170, and  
press the power button.  
Once PC170 is turned on, the LED on the control panel will flash a few times  
and stay lit. Please contact your distributor if the LED is not on.  
English - 16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 6 Control Panel/Remote Control and  
Setting Menu  
6.1 Functions of control panel and remote control  
<Remark> The below functions are listed alphabetically.  
Name  
Function Descriptions  
Operation  
Remote control  
/Control panel  
Turn on and off the Document Camera.  
Remote control  
/Control panel  
Move up, down, left or right to select the  
needed function.  
,,,  
Either sides of the  
lens  
AF Button.  
FOCUS  
Automatically adjust the image to have the best  
brightness and focusing performance.  
AUTO TUNE  
Remote control  
/Control panel  
Adjust the brightness of the image.  
BRT+/-  
Remote control  
Control panel  
/
Capture images to SD card (priority) or internal  
memory card.  
CAPTURE  
Capture and save images to the SD Card  
(priority) or internal memory card while  
displaying live images.  
CAPTURE  
/DEL  
Remote control  
Delete files from the SD Card (priority) or  
internal memory while reading the stored files  
(in Playback mode).  
Enter/Activate functions.  
ENTER  
Remote control  
Control panel  
Remote control  
Live image: Freeze the current image  
OSD Mode: Enter/Activate functions  
ENTER /  
FREEZE  
Freeze the current image to remain temporarily  
on the screen. Press again to defreeze.  
FREEZE  
LAMP  
Lamp mode toggle switch.  
Remote control  
/Control panel  
English - 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Enter Mask/Spotlight mode.  
MASK  
MENU  
PAN  
Remote control  
Activate the setting menu/exit the menu.  
Enable/Disable the Partial Enlarged mode.  
Remote control  
/Control panel  
Remote control  
Remote control  
Image comparison (to compare live images with  
stored image files).  
PIP  
Read files stored in the SD Card (priority) or  
internal memory.  
PLAYBACK  
Remote control  
/Control panel  
/
Record motion images. Press [RECORD] to  
record images to SD Card, and then press  
[RECORD] again to stop recording.  
RECORD  
Remote control  
Remote control  
Screen rotation 0°/180°/Flip/Mirror  
ROTATE  
SOURCE  
Switch between different sources of signals:  
1. Live images (default).  
Remote control  
/Control panel  
2. Computer.  
<Remark> This button is disabled in  
C-VIDEO Out mode.  
Increase or decrease the image size.  
ZOOM +/-  
/
Remote control  
/Control panel  
English - 18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.2 Setting Menu  
6.2.1Main menu  
<Remark> Press [MENU] on the remote control or control panel to display the setting  
menu.  
Auto Tune  
Slide Show  
Automatically adjust the image  
to have the best brightness and  
focusing performance.  
Show the photos or videos  
stored in the SD card (priority) or  
internal memory in slide mode.  
PAN  
Manual Focus  
Enable/Disable the Partial  
Enlarged mode.  
AF Button.  
LAMP  
Rotate  
Lamp mode toggle switch.  
Screen rotation  
0°/180°/Flip/Mirror  
PIP  
Settings  
Image comparison (to compare  
live images with stored image  
files).  
Set up various functions.  
Brightness  
Photo/Text  
Adjust the brightness of the  
image.  
Select Photo/Text/Gray Mode.  
Mask  
Zoom  
Activate the mask mode.  
Increase or decrease the image  
size.  
Mode  
Spotlight  
Select image mode.  
Activate the spotlight mode.  
English - 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6.2.2Set up menu  
1st Level  
Major  
Items  
2nd Level  
Minor Items  
3rd Level  
Adjustment values  
Function Descriptions  
Single Capture / Time  
Press left and right arrow keys to  
select capture mode.  
Capture Mode  
Lapse / Record / Disable  
1. 1 hr  
2. 2 hr  
Use the left and right arrow keys to  
select the capture time.  
<Note> This will be active only  
3. 4 hr  
4. 8 hr  
Capture Time  
5. 24 hr  
6. 48 hr  
7. 72 hr  
1. 3 Sec  
2. 5 Sec  
3. 10 Sec  
4. 30 Sec  
5. 1 Min.  
6. 2 Min.  
7. 5 Min.  
1. High  
2. Medium  
3. Low  
when capture mode is set to timer  
Capture  
Settings  
Use the left and right arrow keys to  
select the capture interval.  
<Note> This will be active only  
when capture mode is set to timer  
Capture Interval  
Use the left and right arrow keys to  
select the image quality for the  
captured images and recorded videos  
Image Quality  
Slide Show  
Show the photos or videos stored in  
the SD card (priority) or internal  
memory in slide mode.  
Enter  
1. 0.5 Sec  
2. 1 Sec  
3. 3 Sec  
4. 5 Sec  
5. 10 Sec  
6. Manual  
Use the left and right arrow keys to  
select the delay time.  
Select manual mode to switch images  
manually.  
Delay  
Use the left and right arrow keys to  
select, and then press [ENTER] to  
confirm to copy files from internal  
memory to SD Card.  
Storage  
Copy To SD Card Enter  
Use the left and right arrow keys to  
select, press [ENTER] to confirm the  
deletion of all images from the SD  
Card (priority) or internal memory.  
Use the left and right arrow keys to  
select, and then press [ENTER] to  
format the SD Card (priority) or  
internal memory.  
Yes/No  
Delete All  
Format  
Yes/No  
English - 20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Regardless of outside environment,  
the machine will adjust the brightness  
to the optimal condition. Use the left  
and right arrow keys to select.  
Regardless of outside light or color,  
the machine will adjust the color to the  
optimal condition; Press [ENTER] to  
activate.  
Auto Exposure  
On/Off  
Auto White  
Balance  
Enter  
Control  
Use the left and right arrow keys to  
adjust the volume.  
Audio Volume  
Projector Type  
Digital Zoom  
0~A~Max  
DLP/LCD  
On/Off  
Use the left and right arrow keys to  
select the projector type and reduce  
image noise.  
Use the left and right arrow keys to  
turn on/off digital zoom.  
1. English  
2. 繁體中文  
English  
繁體中文  
3. 简体中文  
4. Deutsch  
5. Français  
6. Español  
7. Русский  
8. Nederlands  
9. Suomi  
简体中文  
Deutsch  
Français  
Español  
Русский  
Nederlands  
Suomi  
10. Polski  
Polski  
11. Italiano  
12. Português  
13. Svenska  
14. dansk  
Italiano  
Português  
Svenska  
dansk  
Language  
15. ČESKY  
ČESKY  
16. 
العربية
 
17. 日本語  
ة
العربي
 
日本語  
18. 한국의  
19. ελληνικά  
한국의  
ελληνικά  
Advanced  
Use the left and right arrow keys in the  
Language option to select the  
preferred language.  
Use the left and right arrow keys to  
turn on/off the lock down function.  
You can set the password when [On]  
is selected.  
Use the left and right arrow keys to  
enable/disable Auto Erase.  
When [On] is selected, the stored  
images will automatically be deleted  
when the system is turned off.  
Read the value of the current image  
mode.  
On/Off  
Lock Down  
Auto Erase  
On/Off  
Use the left and right arrow keys to  
select, and then confirm by pressing  
[ENTER].  
Yes/No  
Preset Load  
English - 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Read the value of the current image  
mode.  
Use the left and right arrow keys to  
select, and then confirm by pressing  
[ENTER].  
Yes/No  
Preset Save  
Splash Screen  
Settings  
Open Splash Screen Setting window  
Enter  
Yes/No  
NA  
Use the left and right arrow keys to  
select, and then confirm by pressing  
[ENTER] to restore the factory  
defaults.  
Factory Reset  
Display FW version  
Firmware Version  
6.2.3MASK Mode Setting Menu  
2nd Level  
3rd Level  
4th Level  
Major  
Items  
Function Descriptions  
Adjustment values  
Minor Items  
Press [ENTER] to return to live  
image.  
Live  
Enter  
Adjust the transparency of the mask  
using left and right arrow keys.  
Select the step distance of the mask  
using left and right arrow keys.  
Adjust the vertical height of the mask  
using left and right arrow keys.  
Adjust the horizontal length of the  
mask using left and right arrow keys.  
Press [ENTER] key to confirm your  
selection and exit the mask mode  
OSD menu.  
Transparency  
Step  
0~2~3  
Large/Medium/Small  
0~A~Max  
MASK  
Mode  
V Size  
H Size  
0~A~Max  
Exit  
Enter  
English - 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6.2.4Spotlight Mode Setting Menu  
2nd Level  
3rd Level  
4th Level  
Major  
Items  
Function Descriptions  
Adjustment values  
Minor Items  
Press [ENTER] to return to live  
image.  
Live  
Enter  
Shape  
Ellipse/Rectangle  
Adjust the transparency of the border  
in the Spotlight mode using left and  
right arrow keys.  
Transparency  
0~2~3  
Select the step distance of the  
spotlight zone using left and right  
arrow keys.  
Spotlight  
Mode  
Step  
Large/Medium/Small  
Adjust the height of the spotlight zone  
using left and right arrow keys.  
Adjust the width of the spotlight zone  
using left and right arrow keys.  
Press [ENTER] key to confirm your  
selection and exit the spotlight mode  
OSD menu.  
V Size  
H Size  
0~A~Max  
0~A~Max  
Exit  
Enter  
6.2.5Splash Setting Windows  
4th Level  
Adjustment  
values  
3rd Level  
2nd Level  
Function Descriptions  
Major Items  
Minor Items  
Power On Image  
Setting  
Select to use default Power On Video  
or custom Power On Image  
Default/Customer  
Power On Logo  
Show Time  
4 ~ 30 seconds  
Set up Image display time  
Splash  
Screen  
Setting  
Select Power On Image. Only  
pictures in JPEG format are  
supported  
Power On Image  
Select  
Enter  
Enter  
Press [ENTER] key to confirm your  
selection and exit Splash Screen  
Settings window.  
Exit  
English - 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 7 Descriptions of major functions  
7.1 I would like to automatically adjust the image to have  
the best brightness and focusing performance  
Use the remote control or control panel:  
1. Press [AUTO TUNE] for the optimal brightness and focal length.  
7.2 I would like to switch image sources  
Live image is the default image source. Press [SOURCE]  
on the remote  
control or control panel to have PC170 switch among the following images  
sources:  
1. Live images (default).  
2. Computer.  
<Remark> This image switch applies to VGA OUT only.  
7.3 I would like to switch the image mode  
Use the remote control or control panel:  
1
2
3
4
Press [MENU] to enter the setting menu.  
Press [], [], [], or [] to select [Image mode].  
Press [] or [] to the [Normal/Film/Slide/Microscope].  
Press [MENU] to exit.  
7.4 I would like to make text clearer and photos more  
colorful  
7.4.1 Photo/Text mode descriptions  
The default [Photo/Text] mode is in Photo (Photo mode). To change this setting,  
please use the remote control or the control panel to enter the Options of the  
Setting Menu.  
[Photo] (default): for viewing photos or text with photos, making photos more  
colorful.  
[Text]: for viewing text files, making the text clearer.  
[Gray]: for viewing black & white photos which will make the grayscale  
differentiation distinct.  
English - 24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
7.4.2 Setting Photo/Text mode  
To change the settings, please use the remote control or the control panel:  
1. Press [MENU] to enter the setting menu.  
2. Press [], [], [], or [] to select [Photo/Text]. (Please refer to 7.4.1 Photo/Text  
mode descriptions to make the best choice.)  
3. Press [ENTER] key to enter.  
4. Press [] or [] to select the [Photo/Text/Gray].  
5. Press [MENU] to exit.  
7.5 I would like to zoom in/out images  
1. Press [ZOOM+] on the remote control or control panel to zoom in images.  
2. Press [ZOOM-] on the remote control or control panel to zoom out images.  
7.6 I would like to use the auto focus  
1. Press the [FOCUS] AF button on the right side of the lens.  
7.7 I would like to adjust the brightness  
Remote control:  
1. Press [BRT +] to make it brighter.  
2. Press [BRT -] to make it darker.  
Control panel:  
1. Press [MENU] to enter the setting menu.  
2. Press [], [], [], or [] to select [Brightness].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to adjust the brightness.  
5. Press [MENU] to exit.  
7.8 I would like to turn on/off the lamp  
The default of the lamp is OFF. When using the remote control or  
control panel:  
1. Press [LAMP] to switch ON/OFF. (The sequence of switching is: OFF/Arm  
English - 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
light/Dual light/Head light)  
7.9 I would like to freeze images  
1. Press [FREEZE] on the remote control or control panel to freeze the current  
image on the screen. Press again to defreeze.  
7.10I would like to rotate the image  
Remote control:  
1. Press [ROTATE] key to turn the screen. (The sequence of switching is:  
0°/180°/Flip/Mirror)  
Control panel:  
1. Press [MENU] to enter the setting menu.  
2. Press [], [], [], or [] to select [Rotate].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to toggle switch rotation model. (The sequence of switching is:  
0°/180°/Flip/Mirror)  
5. Press [MENU] to exit.  
7.11I want to capture images  
7.11.1 Capture and save images  
1. Press [CAPTURE] on the remote control or control panel to capture and  
save images.  
You cannot capture images when the capture mode is set to [Disable].  
If it is set to [Continuous], you can capture images continuously.  
Press [Capture] to start capturing continuously, or press [Capture]  
again to exit.  
To change the quality of captured images, please refer to 7.11.2  
Setting the quality of captured images.  
To change the settings of captured images, please refer to 7.11.3  
Setting continuous capture.  
7.11.2 Setting the quality of captured images  
1. Press [Menu] on the remote control or control panel to enter the setting  
English - 26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Capture Settings] menu.  
5. Press [] to find [Image Quality].  
6. Press [] or [] to select among [High/Medium/Low].  
7. Press [Menu] to exit.  
7.11.3 Setting continuous capture  
1. Press [MENU] on the remote control or control panel to enter the  
setting menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Capture Settings] menu.  
5. Press [] to the [Capture Mode].  
6. Press [] or [] to select [Timer].  
7. Press [] to find [Capture Time]; Press [] or [] to set capture time.  
8. Press [] to find [Capture Interval]; Press [] or [] to set interval time.  
9. Press [MENU] to exit.  
7.12I would like to record videos  
<Remark> You may not record videos until a SD card is inserted.  
7.12.1 Recording motion images  
<Remark> You may not be able to capture or record images when  
[Capture Mode] is set to [Disable].  
Remote control:  
1. Press [RECORD] on the remote control to start recording videos.  
2. Record sounds with the built-in microphone of the control panel.  
3. Press [RECORD] again to stop recording.  
Control panel:  
1. Press and hold [CAPTURE] for about 2 seconds to start recording videos.  
2. Press [CAPTURE] again to stop recording.  
English - 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7.12.2 Setting the quality of captured images  
1. Press [Menu] on the remote control or control panel to enter the setting  
menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Capture Settings] menu.  
5. Press [] to find [Image Quality].  
6. Press [] or [] to select among [High/Medium/Low].  
7. Press [Menu] to exit.  
7.12.3 Recording setup  
1. Press [MENU] on the remote control or control panel to enter the  
setting menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Capture Settings] menu.  
5. Press [] to the [Capture Mode].  
6. Press [] or [] to select [Record].  
7. Press [MENU] to exit.  
<Remark> When [Capture Mode] is set to [Record], the function of  
[CAPTURE] on the Control Panel is changed to Image Recording.  
7.12.4 Playing videos  
For playing videos, please refer to 7.13 I would like to view  
captured/recorded images.  
7.13I would like to view captured/recorded images  
1. Press [PLAYBACK] on the remote control or control panel to display  
thumbnails of all stored files.  
2. Press [], [], [], or [] to select the thumbnail you want to play.  
3. Press [ENTER] for full-screen play.  
4. When the Video is played, it can be Paused/Played by pressing [Freeze].  
5. Press [] or [] to select the next or previous Audio/Video File.  
6. Press [] or [] to adjust the volume of the video.  
English - 28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7. Press [PLAYBACK] to return to the Thumbnail Mode to select other Audio/Video  
Files, or press [MENU] to exit.  
<Note> An external speaker must be connected to AUDIO OUT to play sound  
when you use VGA OUT.  
7.14I would like to delete the captured/recorded images  
Use Remote control:  
1. Press [PLAYBACK] to show the thumbnails of all stored files.  
2. Press [], [], [], or [] to select the file you want to delete.  
3. Pressing [DELETE] will open a [Delete File] window.  
4. Press [] or [] to select [Yes].  
5. Press [ENTER] to delete the selected file.  
6. Press [MENU] to exit.  
7.15I would like to automatically delete the stored images  
whenever it is turned off (Auto Erase)  
Use the remote control or control panel:  
1. Press [MENU] to enter the setting menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Advanced] menu.  
5. Press [] or [] to [Auto Erase].  
6. Press [] or [] to select [On].  
7. Press [MENU] to exit.  
7.16I would like to enlarge a part of the image (PAN)  
Remote control:  
1. Press [PAN] to enter the Partial Enlarged mode.  
2. Press [], [], [], or [] to move and view the partial enlarged images.  
3. Press [PAN] to exit the partial enlarged mode.  
Operate with Menu:  
1. Press [MENU] to enter the setting menu.  
English - 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
2. Press [], [], [], or [] to select [PAN].  
3. Press [ENTER] to activate.  
4. Press [], [], [], or [] to move and view the partial enlarged images.  
5. Press [MENU] to exit the partial enlarged mode.  
7.17I would like to use the MASK and Spotlight function  
7.17.1 I would like to use the MASK or Spotlight mode  
Use Remote Control:  
1. Press [MASK] key to enter the Mask/Spotlight mode menu. Press [] or [] to  
select mode.  
2. Press [] or [] or [] or [] to move the zone position.  
3. Press [MASK] again to exit and return to the live image screen.  
Operate with Menu:  
1. Press [MENU] to enter the setting menu.  
2. Press [] or [] or [] or [] to select [Mask], Press [ENTER] to enter mask  
mode or select [Spotlight] and press [ENTER] key to enter Spotlight mode.  
3. Press [MENU] to enter the image OSD menu.  
4. Press [] or [] to select [Live].  
5. Press [ENTER] to return to Live Image.  
7.17.2 I would like to set the size of Mask  
I would like to use the Remote under the mask mode:  
1. Press [MENU] to enter the image OSD menu.  
2. Press [] or [] to select the item to be modified [Transparency/Step/V Size/H  
Size]. (For details, please refer to 6.2 Setting Menu.)  
3. Press [] or [] to perform the modification.  
4. Press [MENU] to exit the image OSD menu and return to the Mask mode.  
7.17.3 I would like to set Spotlight function  
Use the Remote under Spotlight mode:  
1. Press [MENU] to enter the image OSD menu.  
English - 30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
2. Press [] or [] to select the item to be modified [Shape/Transparency/Step/V  
Size/H Size]. (For details, please refer to 6.2 Setting Menu.)  
3. Press [] or [] to perform the modification.  
4. Press [MENU] to exit the image OSD menu and return to Spotlight mode.  
7.18I would like to play the slides (Slide Show)  
7.18.1 Setting delay time  
1. Press [MENU] on the remote control or control panel to enter the setting  
menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to the [Storage] menu.  
5. Press [] to find [Delay].  
6. Press [] or [] to select image switch mode between [0.5 Sec/1 Sec/3 Sec/5  
Sec/10 Sec/Manual].  
7. Press [MENU] to exit.  
7.18.2 Activating/Pausing/Stopping the slide show  
<Note> Upper Limit: The maximum size of single photo is 7 MB.  
If you use the remote control or the control panel  
1. Press [MENU] to enter the setting menu.  
2. Press [], [], [], or [] to select [Slide Show].  
3. Press [ENTER] to play.  
4. Press [ENTER] again to Pause/Play.  
5. Press [MENU] to exit.  
English - 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7.19I would like to compare images (compare live images  
with stored images (PIP))  
This function will compare and contrast a live image with a stored image.  
C1  
C5  
C2  
C6  
C3  
C7  
C4  
C8  
C10  
C11  
C12  
Live image Stored image  
Remote control:  
1. Press [Playback] to enter the Playback image thumbnails.  
2. Press [], [], [], or [] to select the file to be compared.  
3. Press [PIP] to activate image comparison.  
4. Press [], [], [], or [] to move the live image.  
5. Repeat Steps 1 - 3 to change other image files.  
6. Press [MENU] to exit.  
7.20I would like to reduce the image noise (Projector  
Type)  
1. This function enables Document Camera to automatically clear image noise.  
The noise is especially obvious when Document Camera is connected to a  
DLP projector. You can set the DLP projector to improve the image quality.  
2. If there is special noise when VGA out is connected, please set DLP option to  
improve the image quality.  
2.1. Press [MENU] on the remote control or control panel to enter the setting  
menu.  
English - 32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2.2. Press [], [], [], or [] to select [Setting].  
2.3. Press [ENTER] key to enter.  
2.4. Press [] or [] to select [Control].  
2.5. Press [] to enter [Projector Type].  
2.6. Press [] or [] to select [LCD/DLP].  
2.7. Press [MENU] to exit.  
7.21I would like to resume the factory default settings  
(Factory Reset)  
7.21.1 Using OSD menu  
1. Press [MENU] on the remote control or control panel to enter the setting  
menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to select [Advanced] menu.  
5. Press [] to select [Factory Reset].  
6. Press [] or [] to select [Yes].  
7. Press [ENTER] to activate.  
7.21.2 Use Compound Key  
1. Use the Control panel, and press [ENTER] + [MENU] simultaneously to  
restore the initial value.  
<Note> Before using the compound keys, please remove all VGA-IN devices.  
7.22I would like to change the splash screen  
<Note> The splash file must be less than 5 MB and in JPEG format.  
1. Press [Menu] on the remote control or control panel to enter the setting  
menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to select [Advanced] menu.  
5. Press [] to select [Splash Screen Settings].  
6. Press [ENTER] key to enter.  
7. Press [] or [] to enter the [Power On Image Setting] menu and press []  
or [] to select [Default/Custom].  
8. Press [] or [] to enter the [Power On Logo Show time] menu and press  
English - 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
[] or [] to set up display time span.  
9. Skip to Step 12 if your select [Default] in Step 7.  
10. Press [] or [] to enter the [Power On Image Select] menu and press  
[ENTER] to read selected file.  
11. Select [YES] to confirm the modification.  
12. Press [] to display the [Exit] dialog box and press [ENTER] key to exit.  
7.23I would like to use a SD card  
1. After the SD card is inserted, the [Copy To SD Card] dialog box will be  
displayed for you to select to copy files in PC170 to SD card.  
Press [] or [] on the remote control or control panel to  
select.  
Copy To SD  
No  
Yes  
7.24Computer-related functions  
Ensure that the USB cable is connected and the drivers are installed before using  
the computer-related functions. Refer to Chapter 4 Installation and Connections  
in this User Manual.  
7.24.1 I would like to insert a photo in MS-Paint  
1. Click [File/From Scanner or Camera] in MS-Paint as shown in the bottom left  
figure.  
English - 34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
2. Click [Get Picture] will capture the photos of live images and insert the files in  
use shown as top right figure.  
<Remark> Support Windows XP Operation System only.  
7.24.2 I would like to insert images in Photoshop  
1. Click [File/Import/WIA Support] in Photoshop.  
2. Complete by clicking [Capture], then clicking [Get Picture].  
7.24.3 I would like to set the PC170 as a PC Camera  
<Remark> For Windows XP, please set by system name (USB video device)  
Open [My Computer] and click [Lumens Document Camera] to open a live image.  
English - 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lumens  
Document  
English - 36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 8 Connecting to Microscope  
1 Mount the microscope adapter onto the microscope.  
<Note> The Microscope adapter accessories are applicable to eyepieces of about  
Ø 28.4mm.  
2 Connect the lens of PC170 with the microscope adaptor  
3 Select the [Microscope] mode  
3.1. When using the control panel or remote control  
3.1.1. Press [MENU] to enter the setting menu.  
3.1.2. Press [], [], [], or [] to select [Image mode].  
3.1.3. Press [] or [] to the [Microscope].  
3.1.4. Press [MENU] to exit.  
4 If the image is not clear  
4.1. Please adjust the focus of microscope.  
4.2. Please press the [FOCUS] button on either side of the PC170 lens to activate  
the auto focus.  
5 Digital Zoom  
5.1. Press [MENU] to enter the setting menu.  
5.2. Press [], [], [], or [] to select [Setting].  
5.3. Press [] or [] to the [Control].  
5.4. Press [] to select [Digital Zoom].  
5.5. Press [] or [] to the [On].  
5.6. Press [MENU] to exit.  
English - 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 9 DIP Switch Settings  
<Note> You should unplug and reconnect the power cord, and then  
restart the PC170 for all DIP Switch Settings to take effect.  
9.1 Connecting to a projector or monitor  
9.1.1 XGA output (default values):  
9.1.2 SXGA output  
9.1.3 WXGA output  
English - 38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9.1.4 1080P output  
9.2 Connecting to a TV  
9.2.1 NTSC: USA, Taiwan, Panama, Philippines, Canada, Chile,  
Japan, Korea, and Mexico.  
9.2.2 PAL: Countries/regions not listed above.  
<Remark> Once C-VIDEO is on, VGA OUT is not supported.  
English - 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 10 Troubleshooting  
This chapter describes problems you may encounter while using PC170. If you have  
questions, please refer to related chapters and follow all the suggested solutions. If the  
problem still occurred, please contact our distributors or service center.  
No.  
1
Problems  
Boot without power  
signal  
Solutions  
Make sure you have plugged in the power cord.  
2
There is no image  
output from PC170  
1. Check the power.  
2. Check all cable connections. Refer to Chapter 4  
Installation and Connections in this manual.  
3. Check the [Source], refer to 7.2 I would like to switch  
image sources of Chapter 7 Descriptions of major  
functions.  
4. Check the settings for the source of the projector. For  
the appropriate input selection of the projector, refer to  
the projectors user manual.  
5. Check if DIP Switch is properly set. Refer to Chapter 9  
DIP Switch Settings for related settings.  
3
Unable to focus  
Probably the document is too close. Press [ZOOM -] on the  
remote control or control panel. Or pull away the lens  
from the document to increase the distance, and then press  
the [FOCUS] button on the right side of the lens.  
Check the Auto Image setting of your projector. Please refer  
to the user manual of the projector or check for the DIP  
SWITCH settings.  
Lumens Document Camera, Podium Viewand other  
applications cannot be executed simultaneously. Only one  
application can be executed at a time. Please close the  
currently running applications and then execute the  
application to be used.  
4
5
The image is  
incomplete  
Lumens Document  
Camera, Podium  
View™ and other  
applications cannot  
be used  
simultaneously  
When the unit is  
turned on, the  
auxiliary floodlight  
do not light  
6
7
Please make sure the arm lamp is set to “OFF”. For the  
switch-on or -off of arm lamp, please refer to 7.8 I would  
like to turn on/off the lamp of Chapter 7 Descriptions of  
major functions.  
PC170 fails to store  
images or react  
1. Check to see if the stored data have reached the  
maximum size of the USB device (priority) or internal  
memory.  
2. Please make sure if the Capture function is set to  
Continuous mode or the time for capture is set to be  
long. For the related setting, refer to 7.11 I would like  
English - 40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
to capture images of Chapter 7 Descriptions of  
major functions.  
8
9
The images  
Press [AUTO TUNE] to automatically adjust to the optimal  
brightness and focal length.  
outputted from  
PC170 are too bright,  
dark or vague  
Unable to record  
images  
1
2
Check to see if the stored data have reached the  
maximum size of the SD Card.  
The recording to internal memory is not supported.  
Please make sure a SD card is inserted prior to video  
recording.  
10 The operating steps  
in the manual are not  
applicable to the  
machine  
The operating steps in the manual may be not  
applicable to the machine due to improvement in  
functions. Check to see if the Firmware version of your  
machine is up-to-date.  
3
4
Please go to Lumens official website to check whether  
the latest version is available for update.  
The steps to check the FW version are as below:  
4.1 Press [MENU] on the remote control or control  
panel to enter the setting menu.  
4.2 Press [], [], [], or [] to select [Setting].  
4.3 Press [ENTER] key to enter.  
4.4 Press [] or [] to select [Advanced] menu.  
4.5 View [Firmware Version].  
If you are not sure whether it is the latest version,  
please consult your distributor for advice.  
11  
How to unlock the  
locked device  
1. Press [Menu] on the remote control or control panel  
to enter the setting menu.  
2. Press [], [], [], or [] to select [Setting].  
3. Press [ENTER] key to enter.  
4. Press [] or [] to select [Advanced] menu.  
5. Press [] to [Lock Down].  
6. Press [] or [] to select [Off] and deactivate the  
password setting function.  
English - 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Krown Manufacturing Printer 2000STD User Manual
LevelOne Computer Drive MUS 2500 User Manual
LG Electronics Air Conditioner LA090HPO User Manual
Life Fitness Bicycle C3 0100 01 User Manual
Life Fitness Elliptical Trainer CLSX 0XXX 01 User Manual
Life Fitness Treadmill 97TE XXXX 08 User Manual
Linksys Network Card WAPPOE User Manual
Makita Drill HP2010N User Manual
Marshall electronic Microphone MXL2010 User Manual
MB QUART Car Speaker PVL216 User Manual