LaCie 12big rack serial
Quick Install Guide
Table of Contents
page 1
EN
English
Table of Contents
1. Introduction............................................................................................................. 2
1.1. Safety.......................................................................................................................................... 2
1.2. Rack System Precautions............................................................................................................2-3
1.3. ESD Precaution............................................................................................................................ 3
2. Preparation ............................................................................................................. 3
2.1. Before you begin.......................................................................................................................... 3
3. Unpackaging the Storage System ............................................................................ 3
4. Mounting the System into the Rack.......................................................................4-5
5. Installing Modules ................................................................................................... 5
6. Installing the PSU Modules...................................................................................... 5
7. Installing the Dual Fan Cooling Module .................................................................. 6
8. Installing the I/O Modules....................................................................................6-7
9. Connecting Storage System to Host ......................................................................... 7
10. Installing Drives..................................................................................................... 8
11. Power On .............................................................................................................. 8
12. I/O Module.........................................................................................................8-9
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Introduction/Preparation/Unpackaging
page 3
3. Unpacking the Storage
System
Warning: Do not remove covers from the PSU. Danger of
electric shock inside. Return the PSU to your supplier for repair.
Caution: If this equipment is used in a manner not specified
by the manufacturer, the protection provided by the equipment
may be impaired.
Position the shipping packaging within reasonable distance of
the site where you intend to install the storage system.
Inspect the packaging for crushes, cuts, water damage, or
any other evidence of mishandling during transit. If any
damage appears to be present, it is suggested to take
photographs before opening any boxes. You may wish to
contact the shipping company if there is apparent damage.
1.3. ESD Precautions
It is recommended that you fit and check a suitable anti-static
wrist or ankle strap and observe all conventional ESD
precautions when handling LaCie 12big rack serial plug-in
modules and components. Avoid contact with backplane
components and module connectors, etc.
Open the carton top and remove the accessory kit.
Remove the foam component on top of the enclosure.
Using an assistant, lift the enclosure from the carton and
place it on a stable work surface.
2. Preparation
2.1. Before You Begin
Before you begin, make sure the site where you
intend to set up and use your storage system has
the following:
• Standard AC power from an independent source or a rack
power distribution unit with a UPS.
• Host computer with the correct firmware, BIOS and drivers.
Contact your supplier for the correct software levels.
The Accessory Box contains the power cables and other
ordered accessories.
Before setting up your enclosure ensure you have the following:
• SAS HBA
• Mini-SAS to Host Cable
• Power Cable
• Rack kit (if installing within a rack)
Figure 1: Unpacking the
Storage System
Refer to your supplier for a list of qualified accessories for use
with the enclosure.
(Populated Enclosure)
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Mounting the System into the Rack
page 4
4. Mounting the System into
the Rack
1. Remove the Rack Mounting Rail Kit from the Accessory
Box and check for damage.Attach the left and right
chassis slides to the enclosure sides using six M3x4 but-
ton head screws. Three screws each side see Figure 2
for locations.
2. Attach left and right chassis slides to the enclosure sides
using 8 M3 x 4 buttonhead screws (see Figure 2).
3. Assemble the left and right chassis latches using the
special chassis latch screws. Ensure the latch is orien-
tated as shown in Figure 2, with the spring arm located
against its stop. On the right hand side this is at the top,
on the left at the bottom.
4. Assemble the rack brackets to the rack posts as follows
Figure 2: Securing Chassis Slides to Enclosure
(see Figure 3):
a. Position the location pin at the rear of the rail into a
rear rack post hole. Attach the bracket to the rear rack
post using the washers and screws supplied. The screws
should be left loose.
b. Extend rail to fit between the front and rear rack
posts.
c. Attach the bracket to the front rack post using the
washers and screws supplied. The screws should be left
loose.
d. Tighten the two clamping screws located along the in-
side of the rear section of the rack bracket (see Figure 3).
Figure 3: Securing Brackets to Rack
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Mounting the System/Installing Modules/Installing the PSU Modules
page 5
5. Mount the enclosure into the rack as follows (see Figure 4):
6. Installing the PSU Modules
a. Lift the enclosure and align it with the rack rails.
b. Carefully insert the chassis slides into the rack rails
and push fully home.
Warning: Do not mix PSUs of different types or makes.
c. Tighten the rear rack bracket mounting screws.
Caution: Handle the module carefully and avoid damaging
the connector pins. Do not install if any pins appear to be bent.
d. Withdraw enclosure until it reaches the hard stops
(approx. 400mm) and tighten the front rack bracket
mounting screws.
imPortant: To prevent overheating, do not operate the
enclosure for more than 30 minutes with one PSU removed.
e. Return the enclosure to the fully home position and
attach it to the rack using the captive fasteners on the
front flanges.
1. Check for damage, especially to the rear connector
of the PSU.
2. Slide the PSU into the enclosure (see Figure 6).
3. Continue to push the PSU until it fully seats. A click
should be heard as the handle latch engages.
4. Connect the power cables to the power source and to
the PSU.
5. Engage the retaining spring.
note: The alarm will sound until the PSU is operating correctly.
Figure 4: Mounting the System into a Rack
5. Installing Modules
Fit the modules into the bays defined in Figure 5.
Figure 6: Installing the AC Power Supply Module
Figure 5: Module Locations
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Installing the Dual Fan/Installing the I/O Modules
page 6
7. Installing the Dual Fan
Cooling Module
8. Installing the I/O Modules
imPortant: If only one I/O module is fitted, it must be
installed into the lower (Slot 0) location, otherwise direct SATA
will not work.
Caution: Handle the module carefully and avoid damaging
the connector pins. Do not install if any pins appear to be bent.
Caution: Handle the modules carefully and avoid damaging
1. Check for damage, especially to the rear connector of
the connector pins. Do not install if any pins appear to be bent.
the module.
2. With the latch in the open position (see Figure 7), slide
the module into the enclosure until the latch engages
automatically.
1. Check for damage, especially to the rear connector of
the module.
2. With the latch in the open position (see Figure 9), slide
the module into the enclosure until the latch engages
automatically.
3. Secure the module by manually closing the latch. A click
should be heard as the module latch engages.
3. Secure the module by manually closing the latch. A click
should be heard as the module latch engages.
Figure 7: Cooling Module Latch
Figure 9: I/O Module Latch
Figure 10: Installing the I/O Module (1)
Figure 8: Installing the Dual Fan Cooling Module
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Installing the I/O Modules/Connecting Storage
page 7
Figure 11: Installing the I/O Module (2)
Figure 14: Dual Host, Single Connection
9. Connecting Storage
System to Host
Figure 12: Basic Configuration
Figure 15: Dual Host, Dual Connection
imPortant: Refer to release note for configuration of
maximum number of enclosures.
Figure 13: Single Host, Single Connection
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
Installing Drives/Power On/I/O Module
page 8
5. Carefully insert the anti-tamper lock key provided into
the cutout in the handle and rotate the key in a clockwise
direction until the red indicator is visible in the aperture
beside the key (see Figure 15).
10. Installing Drives
Caution: All drive bays must be fitted with either a drive carrier
or dummy carrier module. No bays should be left empty.
Column 1
Column 2
Column 3
Column 4
Row 1
Row 2
Row 3
Figure 19: Installing a Drive Carrier (2)
Figure 16: Bay Number Definition
11. Power On
The 12big rack serial enclosure system supports SAS and SATA
drives. However, mixing of drive types within a single enclosure is
not supported. The enclosure has no restrictions on drive location.
Power on the storage system by connecting the power cables
to the power distribution unit (PDU), powering on the PDU,
moving the PSU switches to the ON position, and then power-
ing on the host system.
1. Ensure the anti-tamper lock is disengaged (see Figure 15).
2. Release the carrier handle by pressing the latch in the
handle towards the right and insert the carrier into the
enclosure.
All LEDs on the Ops Panel should illuminate and the alarm
will beep momentarily when power is activated. Wait for one
minute before accessing the system(s).
3. Gently slide the carrier all the way into the enclosure
until it is stopped by the camming lever on the right of
the carrier (see Figure 16).
Figure 17: Drive Anti-Tamper Lock
Figure 20: Connecting the AC Power Cables to the PDU
12. I/O Module
Figure 18: Installing a Drive Carrier (1)
4. The camming foot on the base of the carrier will engage
into a slot in the enclosure. Continue to push firmly until the
handle fully engages. A click should be heard as the latch
engages and holds the handle closed (see Figure 17).
Figure 21: I/O Module
Download from Www.Somanuals.com. All Manuals Search And Download.
LaCie 12big rack serial
Quick Install Guide
I/O Module
page 9
ops Panel LEDs
other
associated LEDs or alarms
State Description
On
On
On
On
Off
On
On
any
any
On
any
any
12big rack serial Module activity LEDs flash
Ops Panel power on test state.
Power On. All functions good.
Dual Fan failure.
Dual Fan Cooling Module Fault LED on.
Continuous beep.
On Flash
any
any
any
any
Dual Fan Cooling Module Fault LED on.
Intermittent beep.
Single Fan failure.
On Flash
PSU Module Fault LED on.
Intermittent beep.
Single PSU failure.
On Flash
any
any
any
any
any
any
Intermittent beep.
PSU removed.
On Flash
any
Intermittent beep.
Over or under temperature warning.
Over or under temperature critical.
Voltage critical.
On
On
On
On
On
Off
any
Continuous beep.
any
As per Drive fault
LED
Continuous beep.
None
Drive critical.
On
On
Off
On
As per Drive fault
LED
any
None
Drive non-critical.
any
any
any2
any2
12big rack serial Fault & ID LEDs on.
Continuous beep.
12big rack serial Module watchdog failure.
On Flash
any
any
12big rack serial Fault & ID LEDs on.
Internittent beep.
12big rack serial Module soft (or POST)
failure.
On Flash
12big rack serial Fault & ID LEDs on.
Intermittent beep.
Other 12big rack serial Module fault.
LED operation set via SES Control page 0x02
On
On
any
any
Off
any
any
Power On. All functions good.
As per Drive fault
Drive Bay Fault LED flash.
POST fault bit set for any Array Device
Element.
LED
On
any
As per Drive fault
any
Drive Bay Fault LED flash.
Other Array bits set for any Array Device
Element.
LED
any
any
On
On
On
any
any
Continuous beep.
Intermittent beep.
UNRECOV bit set in Audible Alarm element.
any
INFO, NON-CRIT, CRIT bits set in Audible
Alarm element
On
any
any
any
any
any
Continuous beep.
UNRECOV bit set in Audible Alarm element.
On Flash
REQUEST WARNING bit set in Enclosure
element.
On
On
On
any
any
any
REQUEST FAILURE bit set in Enclosure
element.
any
Flash
RQST IDENT bit set in Enclosure element.
notes
1. The 12big rack serial alarm pattern is a 1 second on, 1
second off sequence, applied to all 12 Activity LEDs.
2. If an 12big rack serial fault LED is fitted, this will be set for
all the above conditions. In addition this LED will flash for
an 12big rack serial module soft failure.
3. The Logical Fault LED will take the state of the highest
priority drive bay fault LED.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Us
LaCie USA
LaCie Canada
LaCie Nordic
22985 NW Evergreen Pkwy
Hillsboro, OR 97124
235 Dufferin St.
Toronto, Ontario M6K 1Z5
(Sweden, Denmark, Norway, Finland)
Sveavägen 90, 5tr
113 59 Stockholm, Sweden
LaCie France
LaCie Germany
17, rue Ampère
91349 Massy Cedex
Am Kesselhaus 5
D-79576 Weil Am Rhein
LaCie Spain
C/ Núñez Morgado, 3, 5a pl.
28036 Madrid
LaCie Asia (HK)
LaCie Italy
25/F Winsan Tower
98 Thomson Road
Wanchai, Hong-Kong
Milano Business Park
Via dei Missaglia 97
20142 Milano
LaCie Switzerland
Davidsbodenstrasse 15 A
4004 Basel
LaCie Asia (Singapore)
Centennial Tower, Level 34
3 Temasek Avenue
Singapore 039190
LaCie Japan K.K.
LaCie United Kingdom
and Ireland
Uruma Kowa Bldg. 6F
8-11-37 Akasaka, Minato-ku
Tokyo 107-0052
LaCie LTD - Friendly House
52-58 Tabernacle Street
London, England EC2A 4NJ
Ireland: [email protected]
LaCie Australia
LaCie Netherlands
Postbus 134
3480 DC Harmelen
458 Gardeners Rd.
Alexandria, NSW 2015
LaCie Worldwide Export
17, rue Ampère
91349 Massy Cedex, France
LaCie Belgium
LaCie Middle East FZE
LIU-E6, PO Box 293860,
Dubai Airport Free Zone,
Dubai, U.A.E.
Vorstlaan 165/ Bld
du Souverain 165
1160 Brussels
information on LaCie products.
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright © 2009, LaCie
713355 090529
Download from Www.Somanuals.com. All Manuals Search And Download.
|