LG Electronics TV Antenna 42PG69 User Manual

PLASMA TV  
OWNER’S MANUAL  
PLASMA TV MODELS  
42PG69  
50PG69  
**  
**  
Please read this manual carefully before operating your  
TV.  
Retain it for future reference.  
Record model number and serial number of the TV.  
Refer to the label on the back cover and quote this  
information.  
To your dealer when requiring service.  
Trademark of the DVB Digital Video  
Broadcasting Project (1991 to 1996)  
ID Number(s): 5506: 42PG6900 5508: 50PG6900  
5528: 42PG6910 5529: 50PG6910  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ACCESSORIES  
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the  
dealer where you purchased the TV.  
Image shown may differ from your TV.  
Batteries  
Owner’s Manual  
Power Cord  
This feature is not available for all models.  
* Lightly wipe any stains or fingerprints on  
the surface of the TV with the polishing  
cloth.  
Polishing Cloth  
Polishing cloth for use on  
the screen.  
Do not use excessive force. This may cause  
scratching or discolouration.  
Remote Control  
(50PG69** only)  
(42PG69** only)  
Cable Holder  
Protection cover  
(Refer to p.9)  
Ferrite core  
(This feature is not available for  
all models.)  
Cable management clip  
Use of ferrite core (This feature is not available for all models.)  
Ferrite core can be used to reduce the electromagnetic  
wave when connecting the power cord.  
The closer the location of the ferrite core to the power  
plug, the better it is.  
Install the power plug closely.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTENTS  
Auto Programme Tuning (In Analogue Mode) . . . . . 40  
Manual Programme Tuning (In Analogue Mode) . . . . . . . 41  
Fine Tuning (In Analogue Mode) . . . . . . . . . . . . . . 42  
Assigning a Station Name (In Analogue Mode) . . . . . . 42  
Programme Edit (In Analogue Mode) . . . . . . . . . . . . . 43  
Selecting the Programme Table . . . . . . . . . . . . . . 45  
Input Source Selection . . . . . . . . . . . . . . . . . . . . . 46  
SIMPLINK Function . . . . . . . . . . . . . . . . . . . . . . . . 47  
ACCESSORIES  
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  
1
PREPARATION  
Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 5  
Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6  
Please set it up carefully so the product does not fall  
over. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Back Cover for Wire Arrangement . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
DVR (DIGITAL VIDEO RECORDER)  
Desktop Pedestal Installation . . . . . . . . . . . . . . . . . . 9  
Wall Mount: Horizontal installation . . . . . . . . . . . . . 9  
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . 10  
TimeShift Mode ( Pause & Replay of Live TV) . . . 49  
Instant Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Manual Recording . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Recorded TV Programme List . . . . . . . . . . . . . . . . . 56  
Schedule List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Record Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Format Hard Disc . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
EXTERNAL EQUIPMENT SETUP  
HD Receiver Setup . . . . . . . . . . . . . . . . . . . . . . . . 11  
DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Insertion of CI module . . . . . . . . . . . . . . . . . . . . . . 15  
VCR Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  
Digital Audio Out Setup . . . . . . . . . . . . . . . . . . . . . 18  
Other A/V Source Setup . . . . . . . . . . . . . . . . . . . . 19  
PC Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
- Screen Setup for PC Mode . . . . . . . . . . . . . . . 23  
EPG (Electronic programme guide)(In Digital Mode)  
Switch on/off EPG . . . . . . . . . . . . . . . . . . . . . . . . 63  
Select a programme . . . . . . . . . . . . . . . . . . . . . . . 63  
Button function in NOW/NEXT guide mode . . . 63  
Button function in 8 days guide mode . . . . . . . . 64  
Button function in date change mode . . . . . . . . 65  
Button function in extended description box . . . 65  
Record Popup . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Conflict pop-up . . . . . . . . . . . . . . . . . . . . . . . . . .66  
WATCHING TV / PROGRAMME CONTROL  
Remote Control Key Functions . . . . . . . . . . . . . . . . 27  
Turning on the TV . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Programme Selection . . . . . . . . . . . . . . . . . . . . . . . 30  
Volume Adjustment . . . . . . . . . . . . . . . . . . . . . . . . 30  
On Screen Menus Selection and Adjustment . . . . 31  
Auto Programme Tuning (In Digital Mode) . . . . . . 32  
Manual Programme Tuning (In Digital Mode) . . . . 33  
Programme Edit (In Digital Mode) . . . . . . . . . . . . . 34  
5V antenna Power (In Digital Mode only) . . . . . . . 36  
Booster (In Digital Mode only) . . . . . . . . . . . . . . . 36  
Software Update (In Digital Mode only) . . . . . . . . 37  
Diagnostics (In Digital Mode only) . . . . . . . . . . . . 38  
CI Information (In Digital Mode only) . . . . . . . . . . 39  
PICTURE CONTROL  
Picture Size (Aspect Ratio) Control . . . . . . . . . . . . 67  
Preset Picture Settings  
- Picture Mode-Preset . . . . . . . . . . . . . . . . . . . . 69  
-
Auto Colour Tone Control (Warm/Medium/Cool) . . . . .70  
Manual Picture Adjustment  
- Picture Mode-User option . . . . . . . . . . . . . . . . 71  
- Colour Tone - User option . . . . . . . . . . . . . . . .72  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD - Picture Improvement Technology . . . . . . . . . . . . . 73  
XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74  
Advanced - Cinema . . . . . . . . . . . . . . . . . . . . . . . . . 75  
Advanced - Black(Darkness) Level . . . . . . . . . . . . . 76  
Picture Reset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77  
Image Sticking Minimization(ISM) Method . . . . . . . . . . 78  
Low-Power Picture Mode . . . . . . . . . . . . . . . . . . . . 79  
TELETEXT  
Switch on/off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
SIMPLE Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
TOP Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96  
FASTEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97  
Special Teletext Functions . . . . . . . . . . . . . . . . . . . . 97  
SOUND & LANGUAGE CONTROL  
DIGITAL TELETEXT  
Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 80  
Preset Sound Settings - Sound Mode . . . . . . . . . . 81  
Sound Setting Adjustment - User Mode . . . . . . . . . . 82  
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83  
TV Speakers On/ Off Setup . . . . . . . . . . . . . . . . . . 84  
Selecting digital audio out . . . . . . . . . . . . . . . . . . . 85  
I/II  
Teletext within Digital Service . . . . . . . . . . . . . . . 98  
Teletext in Digital Service . . . . . . . . . . . . . . . . . . 98  
APPENDIX  
-
-
Stereo/Dual Reception (In Analogue Mode Only) . . . . 86  
NICAM Reception (In Analogue Mode Only) . . . . . . . 87  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 99  
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101  
Product Specifications . . . . . . . . . . . . . . . . . . . . . 102  
Programming the Remote Control . . . . . . . . . . . . 103  
IR Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105  
External Control Device Setup . . . . . . . . . . . . . . 107  
- Speaker Sound Output Selection . . . . . . . . . . 87  
On-Screen Menu Language/Country Selection . . . . . . . . 88  
Language selection (In Digital Mode only) . . . . . . .89  
TIME SETTING  
Clock Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90  
Auto On/ Off Timer Setting . . . . . . . . . . . . . . . . . . 91  
Auto Shut-off Setting . . . . . . . . . . . . . . . . . . . . . . . 92  
Time zone Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . 93  
Sleep Timer Setting . . . . . . . . . . . . . . . . . . . . . . . . . 93  
PARENTAL CONTROL / RATINGS  
Set Password & Lock System . . . . . . . . . . . . . . . . . 94  
Parental Control . . . . . . . . . . . . . . . . . . . . . . . . . . . 95  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
HOME MENU  
This menu is a contents guide.  
In the Home Menu, you can access the Recorded list of the DVR, Manual Recording of the DVR,  
Schedule List or the TV Menu.  
INPUT  
D/A  
MODE  
TV  
POWER  
BRIGHT  
Home  
TV/RADIO  
INPUT  
DVD  
VCR  
This displays the remaining record  
time for analogue input. (Analog  
TV, AV1,AV2, AV3)  
Free Space  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
This displays the remaining  
record time for DTV input.  
Recorded TV  
DVR  
p.49  
BACK  
MENU  
DVR  
EXIT  
GUIDE  
Programme Guide  
Schedule List  
EPG  
p.63  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
Manual Record  
TV Menu  
MARK  
FAV  
VOL  
PR  
TV Menu  
p.31  
MUTE  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
FRONT PANEL CONTROLS  
I
Image shown may differ from your TV  
I
If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.  
Remote Control Sensor  
POWER  
Power/Standby Indicator  
• illuminates red in standby mode.  
• illuminates green when the TV is  
switched on.  
-
+
PR  
INPUT  
MENU  
OK  
VOL  
INPUT  
MENU  
OK  
VOLUME  
PROGRAMME  
Swivel Stand  
After installing the TV, you can adjust the TV set  
manually to the left or right direction by 20 degrees  
to suit your viewing position.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
BACK PANEL INFORMATION  
I
Image shown may differ from your TV.  
10  
1
2
3
4
5
2
11  
6
7
8
9
1
2
6
Power Cord Socket  
OPTICAL DIGITAL AUDIO OUT  
Connect digital audio from various types of equip-  
ment.  
This TV operates on an AC power. The voltage is  
indicated on the Specifications page. Never  
attempt to operate the TV on DC power.  
Note: In standby mode, these ports do not work.  
HDMI Input  
Connect a HDMI signal to HDMI IN.  
7
RGB/DVI Audio Input  
Connect the audio from a PC or DTV.  
Or DVI(VIDEO)signal to HDMI/DVI port with DVI  
to HDMI cable.  
8
9
RS-232C IN (CONTROL & SERVICE) PORT  
Connect to the RS-232C port on a PC.  
3
4
RGB Input  
Connect the output from a PC.  
Antenna Input  
Connect RF antenna to this jack.  
Component Input  
Connect a component video/audio device to  
these jacks.  
10 PCMCIA (Personal Computer Memory Card  
International Association) Card Slot  
(This feature is not available in all countries.)  
11  
S-Video Input  
Connect S-Video out from an S-VIDEO device.  
Audio/Video Input  
5
Euro Scart Socket (AV1/AV2)  
Connect scart socket input or output from an  
external device to these jacks.  
Connect audio/video output from an external  
device to these jacks.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLEASE SET IT UP CAREFULLY SO THE PRODUCT  
DOESN’T FALL OVER.  
I
You should purchase necessary components to fix the TV to the wall on the market.  
I
Position the TV close to the wall to avoid the possibility of it falling when pushed.  
I
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possi-  
bility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will  
also prevent the TV from damage. Ensure that children do not climb or hang from the TV.  
1
2
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.  
1
(If your TV has bolts in the eyebolts, loosen these bolts.)  
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.  
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted  
on the wall.  
2
3
Use a sturdy rope to tie the TV. It is safer to tie the rope so it becomes horizontal between the wall  
and the TV.  
3
!
NOTE  
When moving the TV undo the cords first.  
G
Use a platform or cabinet strong and large enough to support the size and weight of the TV.  
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.  
G
G
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
BACK COVER FOR WIRE ARRANGEMENT  
I
Image shown may differ from your TV.  
Connect the cables as necessary.  
1
External equipment Setup  
To connect additional equipment, see the  
section.  
CABLE MANAGEMENT CLIP  
Install the  
as shown.  
2
42PG69  
**  
50PG69  
**  
Fix the Cable Holder as  
shown and bundle the cables.  
CABLE MANAGEMENT CLIP  
CABLE MANAGEMENT CLIP  
How to remove the cable management clip  
CABLE MANAGEMENT CLIP  
Hold the  
with both hands and pull it upward.  
CABLE MANAGEMENT CLIP  
For the 42PG69** model, press the center of the  
and then lift it .  
42PG69  
50PG69  
**  
**  
Separate CABLE MANAGEMENT  
from TV by pressing two latches.  
!
NOTE  
G Do not use the CABLE MANAGEMENT CLIP to lift the TV.  
- If the TV is dropped, you may be injured or the TV may be damaged.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
I
I
The TV can be installed in various ways such as on a wall or on a desktop etc.  
The TV is designed to be mounted horizontally.  
EARTHING  
Power Supply  
Ensure that you connect the earth wire to prevent possible  
electric shock. Do not try to earth the TV by connecting it  
to telephone wires, lightening rods or gas pipes.  
Circuit  
breaker  
DESKTOP PEDESTAL INSTALLATION  
For adequate ventilation allow a clearance of 4” (10cm) all around the TV.  
4 inches  
4 inches  
4 inches  
4 inches  
WALL MOUNT: HORIZONTAL INSTALLATION  
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a  
wall mounting bracket of LG brand when mounting the TV to a wall.  
4 inches  
4 inches  
4 inches  
4 inches  
4 inches  
NOT USING THE DESK-TYPE STAND  
I
Image shown may differ from your TV.  
When installing the wall-mounted unit, use the protection  
cover for desk-type stand installation.  
PROTECTION COVER  
into the TV until clicking sound.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
PREPARATION  
I
To prevent damage do not connect to the mains outlet until all connections are made between the devices.  
ANTENNA CONNECTION  
I
For optimum picture quality, adjust antenna direction.  
I
An antenna cable and converter are not supplied.  
Multi-family Dwellings/Apartments  
(Connect to wall antenna socket)  
Wall  
Antenna  
Socket  
RF Coaxial Wire (75 ohm)  
Outdoor  
Antenna  
(VHF, UHF)  
Single-family Dwellings /Houses  
(Connect to wall jack for outdoor antenna)  
- 5V antenna power works In Digital  
mode only. (Refer to p. 36)  
UHF  
Antenna  
Signal  
Amplifier  
VHF  
I
I
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the  
antenna as shown above.  
If signal needs to be split for two TVs,use an antenna signal splitter for connection.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
I
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.  
I
Image shown may differ from your TV.  
HD RECEIVER SETUP  
I
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive  
Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.  
Connecting with a component cable  
(
)
Connect the video outputs Y, PB, PR of the digital set  
1
COMPONENT IN VIDEO  
top box to the  
TV.  
jacks on the  
Connect the audio output of the digital set-top box to  
2
3
4
COMPONENT IN AUDIO  
the  
jacks on the TV.  
2
1
Turn on the digital set-top box.  
(
)
Refer to the owner’s manual for the digital set-top box.  
Component input source using the INPUT  
Select  
button on the remote control.  
Signal  
Component  
HDMI1/2/3  
480i/576i  
480p/576p  
720p/1080i  
1080 p  
Yes  
Yes  
Yes  
No  
No  
Yes  
Yes  
Yes  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Connecting a set-top box with an HDMI cable  
HDMI/DVI IN1  
jack on the TV.  
Connect the digital set-top box to  
HDMI IN2 HDMI IN3  
,
1
2
or  
Turn on the digital set-top box.  
(
)
Refer to the owner’s manual for the digital set-top box.  
1
Select HDMI1, HDMI2 or HDMI3 input source using  
INPUT  
3
the  
button on the remote control.  
Connecting with a HDMI to DVI cable  
HDMI/DVI IN1  
Connect the digital set-top box to  
jack on the TV.  
1
2
3
4
Connect the audio output of the digital set-top box to  
AUDIO IN (RGB/DVI)  
the  
jack on the TV.  
1
(
Turn on the digital set-top box. Refer to the owner’s  
2
)
manual for the digital set-top box.  
HDMI1  
INPUT  
button  
Select  
input source using the  
on the remote control.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD SETUP  
Connecting with a component cable  
(
)
Connect the video outputs Y, PB, PR of the DVD to the  
1
2
COMPONENT IN VIDEO  
jacks on the TV.  
Connect the audio outputs of the DVD to the  
COMPONENT IN AUDIO  
jacks on the TV.  
Turn on the DVD player, insert a DVD.  
3
4
2
1
INPUT  
Select Component input source using the  
ton on the remote control.  
but-  
Refer to the DVD player's manual for operating  
instructions.  
5
Component Input ports  
To achieve better picture quality, connect a DVD player to the component input ports as shown below.  
Y
P
B
PR  
Component ports on the TV  
P
B
P
R
Y
B-Y  
Cb  
Pb  
R-Y  
Cr  
Pr  
Y
Y
Y
Video output ports  
on DVD player  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Connecting with a Euro Scart cable  
AV1  
Connect the Euro scart socket of the DVD to the  
Euro scart socket on the TV.  
1
Turn on the DVD player, insert a DVD.  
2
INPUT  
Select AV1 input source using the  
the remote control.  
button on  
3
4
If connected to AV2 Euro scart socket, select AV2  
input source.  
1
Refer to the DVD player's manual for operating  
instructions.  
(R) AUDIO (L)  
AUDIO/  
VIDEO  
!
NOTE  
Any Euro scart cable used must be signal protected.  
G
Connecting with a S-Video cable  
L
R
VIDEO  
S-VIDEO  
ANT IN  
S-  
Connect the S-VIDEO output of the DVD to the  
1
VIDEO  
input on the TV.  
OUT  
SWCH  
ANT OUT  
AUDIO  
Connect the audio outputs of the DVD to the  
input jacks on the TV.  
2
1
2
Turn on the DVD player, insert a DVD.  
3
4
INPUT  
Select AV3 input source using the  
the remote control.  
button on  
Refer to the DVD player's manual for operating instruc-  
tions.  
5
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting the HDMI cable  
Connect the HDMI output of the DVD to the  
1
HDMI/DVI IN1 HDMI IN2  
,
HDMI IN3  
jack on  
or  
the TV.  
HDMI1 HDMI2  
HDMI3  
input source using  
Select  
the  
,
or  
2
3
INPUT  
button on the remote control.  
Refer to the DVD player's manual for operating  
instructions.  
1
!
NOTE  
G The TV can receive video and audio signals simultaneously  
when using a HDMI cable.  
G If the DVD player does not support Auto HDMI, you must  
TV the output resolution appropriately.  
INSERTION OF CI MODULE  
- To view the scrambled (pay) services in digital TV  
mode.  
1
- This feature is not available in all countries.  
PCMCIA  
Insert the CI Module to  
(Personal Computer  
1
CARD SLOT  
Memory Card International Association)  
of TV as shown.  
For further information, see p.39.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
VCR SETUP  
I
To avoid picture noise (interference), allow adequate distance between the VCR and TV.  
I
If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain  
visible.  
Connecting with a RF cable  
L
R
S-VIDEO  
VIDEO  
ANT OUT  
1
OUTPUT  
SWITCH  
ANT IN  
Wall Jack  
2
Antenna  
ANT OUT  
ANTENNA IN  
socket on the TV.  
Connect the  
socket of the VCR to the  
1
2
ANT IN  
Connect the antenna cable to the  
socket of the VCR.  
PLAY  
Press the  
viewing.  
button on the VCR and match the appropriate programme between the TV and VCR for  
3
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting with a Euro Scart  
AV1  
Connect the Euro scart socket of the VCR to the  
Euro scart socket on the TV.  
1
Insert a video tape into the VCR and press PLAY on  
the VCR. (Refer to the VCR owner’s manual.)  
2
INPUT  
Select AV1 input source using the  
the remote control.  
button on  
3
4
1
AV2  
AV2  
If connected to  
input source.  
Euro scart socket, select  
(R) AUDIO (L)  
AUDIO/  
VIDEO  
!
NOTE  
Any Euro Scart cable used must be signal shielded.  
G
Connecting with an RCA cable  
AUDIO VIDEO  
VCR. Match the jack colours (Video = yellow, Audio Left  
= white, and Audio Right = red)  
Connect the  
/
jacks between TV and  
1
1
Insert a video tape into the VCR and press PLAY on  
2
3
(
)
the VCR. Refer to the VCR owner’s manual.  
INPUT  
Select AV3 input source using the  
the remote control.  
button on  
L
R
S-VIDEO  
ANT IN  
VIDEO  
!
NOTE  
OUTPUT  
SWITCH  
ANT OUT  
G If you have a mono VCR, connect the audio cable from the  
AUDIO L/MONO  
VCR to the  
jack of the TV.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Connecting with a S-Video cable  
L
R
VIDEO  
S-VIDEO  
ANT IN  
S-  
Connect the S-VIDEO output of the VCR to the  
VIDEO  
1
input on the TV. The picture quality is  
improved; compared to normal composite (RCA cable)  
input.  
OUT  
SWH  
ANT OUT  
AUDIO  
Connect the audio outputs of the VCR to the  
input jacks on the TV.  
2
3
4
1
2
Insert a video tape into the VCR and press PLAY on the  
VCR. (Refer to the VCR owner’s manual.)  
AV3 input source using the INPUT button on the  
Select  
remote control.  
!
NOTE  
If both S-VIDEO and VIDEO sockets have been connected to  
the S-VHS VCR simultaneously, only the S-VIDEO can be  
received.  
G
DIGITAL AUDIO OUT SETUP  
Sending the TV’s audio signal to external audio equipment via the Digital Audio Output Optical port.  
(
)
Connect one end of an optical cable to the TV Digital  
1
(
)
Audio Optical Output port.  
Connect the other end of the optical cable to the digi-  
2
3
(
)
tal audio optical input on the audio equipment.  
1
Set the “TV Speaker option - Offin the AUDIO menu.  
(Gp.84). Refer to the external audio equipment  
instruction manual for operation.  
2
CAUTION  
GDo not look into the optical output port. Looking at the  
laser beam may damage your vision.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OTHER A/V SOURCE SETUP  
Camcorder  
Video Game Set  
L
R
VIDEO  
1
AUDIO VIDEO  
/
Connect the  
jacks between TV and external equipment. Match the jack colours.  
1
(
)
Video = yellow, Audio Left = white, and Audio Right = red  
AV3  
INPUT  
button on the remote control.  
Select  
input source using the  
2
3
Operate the corresponding external equipment.  
Refer to external equipment operating guide.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
PC SETUP  
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.  
Connecting with a D-sub 15 pin cable  
RGB IN  
Connect the RGB output of the PC to the  
1
2
(
)
PC  
jack on the TV.  
AUDIO IN  
Connect the PC audio output to the  
(RGB/DVI)  
1
jack on the TV.  
Turn on the PC and the TV.  
3
4
2
RGB input source using the INPUT button on  
Select  
the remote control.  
AUDIO  
RGB OUTPUT  
Connecting with a HDMI to DVI cable  
HDMI/DVI  
Connect the DVI output of the PC to the  
IN1  
1
2
jack on the TV.  
AUDIO IN  
Connect the PC audio output to the  
(RGB/DVI)  
1
jack on the TV.  
2
Turn on the PC and the TV.  
3
4
INPUT  
Select HDMI1 input source using the  
on the remote control.  
button  
DVI-PC OUTPUT  
AUDIO  
!
NOTE  
G If the PC has a DVI output and no HDMI output, a separated audio connection is necessary.  
G If the PC does not support Auto DVI, you need to set the output resolution appropriately.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
!
NOTE  
GTo enjoy vivid picture and sound, connect the PC GIf using a sound card, adjust PC sound as required.  
to the TV.  
GThis TV uses a VESA Plug and Play Solution. The  
TV provides EDID data to the PC system with a  
DDC protocol. The PC adjusts automatically when  
using this TV.  
GDDC protocol is preset for RGB (Analogue RGB),  
HDMI (Digital RGB) mode.  
GAvoid keeping a fixed image on the TV ’s screen for  
prolonged periods of time.The fixed image may  
become permanently imprinted on the screen;use a  
screen saver when possible.  
GConnect the PC to the RGB (PC) or HDMI IN (or  
HDMI/DVI IN) port of the TV; change the resolu- GIf required, adjust the settings for Plug and Play  
tion output of PC accordingly. functionality.  
GThere may be interference relating to resolution, GIf the graphic card on the PC does not output ana-  
vertical pattern, contrast or brightness in PC mode.  
Change the PC mode to another resolution or change  
the refresh rate to another rate or adjust the bright-  
logue and digital RGB simultaneously, connect only  
one of either RGB or HDMI IN (or HDMI/DVI IN)  
to display the PC output on the TV.  
ness and contrast on the menu until the picture is GIf the graphic card on the PC does output analogue  
clear. If the refresh rate of the PC graphic card can not  
be changed, change the PC graphic card or consult  
the manufacturer of the PC graphic card.  
and digital RGB simultaneously, switch the TV to  
either RGB or HDMI; (the other mode is set to Plug  
and Play automatically by the TV.)  
GRGB input only supports the separate horizontal GDOS mode may not work depending on the video  
and vertical synchronization pulses in separate  
channels.  
card if you use a HDMI to DVI cable.  
GIf you use too long an RGB-PC cable, there may be  
interference on the screen. We recommend using  
under 5m of cable. This provides the best picture  
quality.  
GConnect the signal cable from the monitor output  
port of the PC to the RGB (PC/DTV) port of the  
TV or the signal cable from the HDMI output port  
of the PC to the HDMI IN (or HDMI/DVI IN) port  
on the TV.  
GConnect the audio cable from the PC to the Audio  
input on the TV. (Audio cables are not included  
with the TV).  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
Supported Display Resolution  
RGB[PC] / HDMI[PC] mode  
HDMI[DTV] mode  
Horizontal  
Frequency(KHz) Frequency(Hz)  
Horizontal Vertical  
Frequency(KHz) Frequency(Hz)  
Vertical  
Resolution  
720x400  
640x480  
Resolution  
31.468  
31.469  
37.500  
37.879  
46.875  
49.725  
48.363  
56.470  
60.023  
47.693  
47.649  
70.08  
59.94  
75.00  
60.31  
75.00  
74.55  
60.00  
70.00  
75.03  
59.99  
59.94  
31.469  
31.469  
31.47  
59.94  
60.00  
59.94  
60.00  
50.00  
50.00  
59.94  
60.00  
59.94  
60.00  
50.00  
24.00  
50.00  
59.94  
60.00  
640x480  
720x480  
720x576  
31.50  
31.25  
800x600  
832x624  
37.50  
1280x720  
44.96  
45.00  
33.72  
33.75  
28.125  
27.000  
56.250  
67.433  
67.500  
1024x768  
1280x768  
1360x768  
1920x1080  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screen Setup for PC mode  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Auto Configure (RGB [PC] mode only)  
Automatically adjusts picture position and minimizes image  
instability.  
TIME  
SHIFT  
TIME  
SHIFT  
After adjustment, if the image is still not correct, your TV is  
functioning properly but needs further adjustment.  
MARK  
FAV  
VOL  
PR  
Auto configure  
This function is for automatic adjustment of the screen posi-  
tion, clock, and phase. The displayed image will be unstable  
for a few seconds while the auto configuration is in progress.  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
MENU  
Press the  
button and then use D E button  
or  
1
2
3
SCREEN  
to select the  
menu.  
OPTION  
SCREEN G  
Press the  
select  
button and then use  
button to  
G
D
E
or  
D V R  
O
Auto Config.  
.
Auto Config.  
Press the G button to start  
.
Move MENU Prev.  
1
Auto Config.  
OK  
will be shown  
• When  
has finished,  
on screen.  
• If the position of the image is still not correct, try  
Auto adjustment again.  
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
G
To Set  
• If picture needs to be adjusted again after Auto  
Manual  
adjustment in RGB (PC), you can adjust the  
Config.  
.
Press the EXIT button to return to normal TV viewing.  
4
2
3
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Adjustment for screen Phase, Clock, Position  
TIME  
SHIFT  
TIME  
SHIFT  
If the picture is not clear after auto adjustment and espe-  
cially if characters are still trembling, adjust the picture  
phase manually.  
MARK  
FAV  
VOL  
PR  
Clock  
To correct the screen size, adjust  
.
This function works in the following mode : RGB[PC].  
Clock  
Phase  
This function is to minimize any vertical bars or stripes  
visible on the screen background the horizontal  
screen size will also change.  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
OPTION  
SCREEN G  
This function allows you to remove any horizontal  
noise and clear or sharpen the image of characters.  
D V R  
O
Move MENU Prev.  
1
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
G
Phase  
0
0
0
0
Clock  
H-Position  
V-Position  
Press the MENU button and then use D  
E button  
or  
1
2
3
SCREEN  
to select the  
menu.  
Press the G button and then D E button to select  
or  
Manual Config.  
.
2
3 4  
Press the G button and then D E button to select  
or  
Phase Clock H-Position V-Position  
,
,
or  
.
Press the F  
ments.  
G button to make appropriate adjust-  
or  
4
5
Press the EXIT button to return to normal TV viewing.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Wide XGA mode  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
To view a normal picture, match the resolution of RGB  
mode and selection of XGA mode  
TIME  
SHIFT  
TIME  
SHIFT  
This function works in the following mode: RGB[PC] mode  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
Press the MENU button and then use D E button  
or  
1
2
3
4
SCREEN  
to select the  
menu.  
OPTION  
SCREEN G  
Press the G button and then use D E button to  
or  
D V R  
O
XGA Mode  
select  
.
Press the G button and then use D E button to  
or  
select the desired XGA resolution.  
Move MENU Prev.  
1
Press the EXIT button to return to normal TV viewing.  
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
G
1024 X 768  
1280 X 768  
1360 X 768  
2
3
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL EQUIPMENT SETUP  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Initialising  
(Reset to original factory settings)  
TIME  
SHIFT  
TIME  
SHIFT  
This function operates in current mode.  
To initialise the adjusted value  
MARK  
FAV  
VOL  
PR  
MUTE  
1
4
2
3
6
5
8
0
7
9
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
OPTION  
select the  
menu.  
LIST  
Q.VIEW  
Press the G button and then D E button to select  
or  
SETUP  
O
O
O
O
Factory Mode  
.
Language  
Country  
Lock System  
Parental Control  
Input Label  
PICTURE  
AUDIO  
TIME  
Press the G button and then D E button to select  
or  
Factory Reset  
OPTION G  
SIMPLINK  
.
SCREEN  
O
O
Factory Mode  
D V R  
Press the G button.  
If you enter a password, all user  
The message “  
Move MENU Prev.  
setting will be reset  
” will appear.  
1
Use NUMBER buttons to input a 4-digit password.  
The TV is set up with the initial password “0-0-0-0.  
5
Set ID  
Language  
Country  
1
Lock System  
Parental Control  
Input Label  
Factory Reset  
OK  
ISM Method  
Normal  
Low Power  
Off  
SIMPLINK  
Factory Mode  
G
2
Set ID  
Language  
Country  
1
Factory Reset  
OK  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
ISM Method  
Factory Mode  
Normal  
Low Power  
Off  
3
4
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
REMOTE CONTROL KEY FUNCTIONS  
When using the remote control, aim it at the remote control sensor on the TV.  
Switches the TV on from standby or off to standby.  
POWER  
INPUT  
D/A  
MODE  
TV  
POWER  
Selects digital or analogue mode.  
Switches the TV on from standby.  
D/A INPUT  
TV/RADIO  
INPUT  
DVD  
VCR  
BRIGHT  
Selects Radio or TV channel in digital mode.  
TV/RADIO  
INPUT  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
External input mode rotate in regular sequence.  
Switches the TV on from standby.  
Adjusts screen brightness.  
This returns to the default settings brightness by changing  
mode source.  
Brightness  
adjustment  
BACK  
MENU  
DVR  
EXIT  
GUIDE  
TELETEXT  
Coloured These buttons are used for teletext (on  
models)  
Programme edit  
or  
.
buttons  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
Clears all on-screen displays and returns to TV viewing  
from any menu.  
EXIT  
Allows the user to move back one step in an interactive  
application, EPG or other user interaction function.  
BACK  
MARK  
FAV  
VOL  
PR  
DVR Call up the Home menu.  
MENU Selects a menu.  
MUTE  
1
4
2
3
6
GUIDE  
Shows programme schedule.  
5
8
0
Adjusts the volume.  
VOLUME UP  
/DOWN  
7
9
Displays the selected favourite programme.  
Check and un-check programmes in the recorded TV menu.  
FAV/MARK  
LIST  
Q.VIEW  
Switches the sound on or off.  
Selects a programme.  
MUTE  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
Programme  
UP/DOWN  
REVEAL  
I/II  
Selects a programme.  
Selects numbered items in a menu.  
0~9 number  
button  
Displays the programme table.  
LIST  
Returns to the previously viewed programme.  
Q.VIEW  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
Selects the remote operating modes.  
MODE  
See a list of AV devices connected to TV.  
INPUT  
D/A  
MODE  
TV  
When you toggle this button, the Simplink menu appears  
at the screen.  
POWER  
TV/RADIO  
INPUT  
DVD  
VCR  
1
TELETEXT  
BUTTONS  
These buttons are used for teletext.  
For further details, see the ‘Teletext’ section.  
BRIGHT  
Shows the present screen information. (In Digital Mode only)  
INFO i  
LIVE TV  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
1
In Delayed mode, the screen returns to Live programme  
from DTV, TV, AV1, AV2 and AV3 modes.  
Controls video cassette recorders or DVD players when  
you select DVD or VCR mode button.  
Control connected AV devices by pressing the D or E or  
DVR/VCR/DVD  
control buttons  
F
or G, OK buttons and buttons for play, stop, pause,  
fast reverse, fast forward, chapter skip.  
(The button does not provide such functions.)  
BACK  
MENU  
DVR  
EXIT  
GUIDE  
Use for DVR record or trick play.  
Allows you to navigate the on-screen menus and adjust  
the system settings to your preference.  
E or  
D
/
OK  
TIME  
SHIFT  
TIME  
SHIFT  
F G (TIME SHIFT)  
/
Accepts your selection or displays the current mode.  
OK  
MARK  
FAV  
SLEEP  
SUBTITLE  
RATIO  
Sets the sleep timer.  
VOL  
PR  
Recalls your preferred subtitle in digital mode.  
MUTE  
Selects your desired picture format.  
Selects the sound output.  
1
4
2
3
6
I/II  
5
8
0
7
9
Installing Batteries  
LIST  
Q.VIEW  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
1
REVEAL  
I/II  
I
Open the battery compartment cover on the back and install the  
batteries matching correct polarity (+with +,-with -).  
I
Install two 1.5V AA batteries. Do not mix old or used batteries with  
new ones.  
I
Close cover.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TURNING ON THE TV  
- When your TV is turned on, you will be able to use its features.  
INPUT  
D/A  
MODE  
TV  
POWER  
BRIGHT  
TV/RADIO  
INPUT  
DVD  
VCR  
Firstly, connect the power cord correctly.  
1
At this stage, the TV switches to standby mode.  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
2
r
In standby mode to turn TV on, press the  
/ I, INPUT or  
PR D or E button on the TV or press the POWER,  
INPUT, D/A, PR + or - or NUMBER button on the remote  
control and the TV will switch on.  
BACK  
MENU  
DVR  
EXIT  
GUIDE  
Initializing setup  
OK  
If the OSD (On Screen Display) is displayed on the screen  
after turning on the TV, you can adjust the Language, Select  
Mode, Country, Time Zone, Auto programme tuning.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
Note:  
a. It will automatically disappear after approx. 40 seconds  
unless a button is pressed.  
VOL  
PR  
b. Press the BACK button to change the current OSD to  
the previous OSD.  
MUTE  
1
4
2
3
6
c. For those countries without confirmed DTV broadcast-  
ing standards, some DTV features might not work,  
depending on the DTV broadcasting environment.  
d. "Home” mode is the optimal setting for home environ-  
ments, and is the TV's default mode.  
e. "In Store" mode is the optimal setting for store environ-  
ments.“ If a user modifies image quality data, “In Store”  
mode initializes the product to the image quality set by  
us after a certain period of time.  
5
8
0
7
9
LIST  
Q.VIEW  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
f. The mode (Home, In Store) can be changed by execut-  
ing Factory Reset in the OPTION menu.  
REVEAL  
I/II  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
PROGRAMME SELECTION  
PR +  
gramme number.  
-
Press the  
or or NUMBER buttons to select a pro-  
1
INPUT  
D/A  
MODE  
TV  
POWER  
BRIGHT  
TV/RADIO  
INPUT  
DVD  
VCR  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
BACK  
MENU  
DVR  
VOLUME ADJUSTMENT  
EXIT  
GUIDE  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
+
-
Press the VOL or button to adjust the volume.  
1
MARK  
FAV  
If you wish to switch the sound off, press the MUTE  
button.  
VOL  
PR  
MUTE  
You can cancel this function by pressing the MUTE,  
1
4
2
3
6
+
-
VOL or , or I/II button.  
5
8
0
7
9
LIST  
Q.VIEW  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
REVEAL  
I/II  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ON SCREEN MENUS SELECTION AND ADJUSTMENT  
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.  
MENU  
D
E
Press the  
button and then or  
button to display each menu.  
1
2
Press the G button and then D or E button to select a menu item.  
Change the setting of an item in the sub or pull-down menu with F or G button.  
3
OK MENU  
or  
You can move to a higher level menu by pressing the  
button.  
SETUPG  
SETUP  
O
SETUP  
O
O
Auto Tuning  
Picture Mode  
Colour Temperature  
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
PICTURE G  
PICTURE  
0
AUDIO  
O
O
O
O
O
AUDIO G  
Advanced  
Picture Reset  
Demo  
TIME  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
OPTION  
SCREEN  
D V R  
OPTION  
SCREEN  
D V R  
CI Information  
Move MENU Prev.  
Move MENU Prev.  
Move MENU Prev.  
: This feature is not available  
in all countries.  
*
SETUP  
PICTURE  
AUDIO  
O
O
O
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
TIME G  
OPTION  
SCREEN  
D V R  
O
O
O
Move MENU Prev.  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
TimeShift Mode  
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
Auto Config.  
Manual Config.  
XGA Mode  
Aspect Ratio  
Reset  
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
OPTION  
SCREEN  
OPTION  
OPTION G  
SCREEN G  
SCREEN  
O
O
Factory Mode  
D V R G  
D V RO  
D V R  
Move MENU Prev.  
Move MENU Prev.  
Move MENU Prev.  
!
NOTE  
5V Antenna Power Booster Software Update Diagnostics  
will not be displayed.  
CI  
G In Analogue mode,  
Information  
,
,
,
and  
SETUP  
G When you play recorded programmes, some of  
functions are not activated.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
AUTO PROGRAMME TUNING  
(IN DIGITAL MODE)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Use this to automatically find and store all available programmes.  
TIME  
SHIFT  
TIME  
SHIFT  
When you start auto programming in digital mode, all previously  
stored service information will be deleted.  
MARK  
FAV  
It is not possible to use this function while recording a programme.  
VOL  
PR  
SETUPG  
Auto Tuning  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Press the MENU button and then D E button to  
or  
1
2
3
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
SETUP  
select the  
menu.  
OPTION  
SCREEN  
D V R  
CI Information  
Press the G button and then D E button to select  
or  
Auto Tuning  
.
Move MENU Prev.  
1
Press the G button to begin auto tuning.  
Use NUMBER buttons to input a 4-digit password in  
Lock System On  
.  
Auto Tuning  
G
Start  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
All service-information will be  
The message “  
updated. Continue?  
” will appear.  
CI Information  
YES  
If you want to keep on auto tuning select  
with  
using the F G button. Then, press the OK button.  
or  
Otherwise select  
NO  
.
2
Auto Tuning  
To stop auto tuning, press the MENU button.  
0
0
Programme(s)  
Programme(s)  
Press the EXIT button to return to normal TV viewing.  
4
UHF CH.  
14  
24 %  
MENU  
Stop  
3
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL PROGRAMME TUNING  
(IN DIGITAL MODE)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Manual Tuning lets you manually add a programme to your programme  
list.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUPG  
Auto Tuning  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Press the MENU button and then D E button to  
or  
1
2
3
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
SETUP  
select the  
menu.  
OPTION  
SCREEN  
D V R  
CI Information  
Press the G button and then D E button to select  
or  
Manual Tuning  
.
Move MENU Prev.  
1
Press the G button and then D E button or NUM-  
or  
BER buttons to select the desired channel number.  
Use NUMBER buttons to input a 4-digit password in  
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
G
Your receiver will  
add this channel to  
your channel list.  
Lock System On  
.  
UHF CH.  
35  
Press the OK button to save.  
4
CI Information  
When the channel number you want to add is already  
Setup infor-  
in the programme list, the message “  
mation for the channel will be updated.  
Continue?  
2
” will appear.  
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
Your receiver will  
add this channel to  
your channel list.  
YES  
If you wish to continue manual tuning, select  
using the F G button.  
or  
D
35  
UHF CH  
E
CI Information  
NO  
Then, press the OK button. Otherwise select  
.
Search  
3 4  
Press the EXIT button to return to normal TV viewing.  
5
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
PROGRAMME EDIT  
(IN DIGITAL MODE)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
When a programme number is skipped, it means that you will be  
unable to select it using PR + or - button during TV viewing.  
TIME  
SHIFT  
TIME  
SHIFT  
If you wish to select the skipped programme, directly enter the pro-  
gramme number with the NUMBER buttons or select it in the  
Programme edit menu.  
MARK  
FAV  
This function enables you to skip the stored programmes.  
VOL  
PR  
In some countries it is possible to move a programme number by  
using the YELLOW button only.  
MUTE  
1
4
2
3
6
It is not possible to use this function while recording a programme.  
5
8
0
7
9
LIST  
Q.VIEW  
Press the MENU button and then D E button to  
or  
1
2
3
SETUP  
select the  
menu.  
Press the G button and then D E button to select  
or  
SETUPG  
Auto Tuning  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Programme Edit  
menu.  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
OPTION  
SCREEN  
D V R  
Programme Edit  
Press the G button to enter the  
menu.  
CI Information  
Use NUMBER buttons to input a 4-digit password in  
Lock System On  
.  
Move MENU Prev.  
1
Select a programme to be stored or skipped with the  
E or F G button.  
4
5
D
or  
or  
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
G
To Set  
Press the BLUE button repeatedly to have the pro-  
gramme skipped or stored.  
CI Information  
When programmes are to be skipped, skipped pro-  
gramme shows in blue and these programmes will not  
be selected by the PR + or - buttons during TV view-  
ing.  
2 3  
Press the EXIT button to return to normal TV viewing.  
6
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mini Glossary  
TEXT  
Displayed with a DTV Programme.  
Displayed with a Teletext Programme.  
Displayed with a Subtitle Programme.  
Displayed with an Scramble Programme.  
Displayed with a Dolby Programme.  
Displayed with a Locked Programme.  
Displayed with a Radio Programme.  
Displayed with a MHEG Programme.  
ASkipping a programme number  
Select a programme number to be skipped with the D E or F G button.  
or or  
1
2
3
Press the BLUE button. The skipped programme number turns to blue.  
Press the BLUE button again to release the skipped programme.  
When a programme number is skipped it means that you will be unable to select it using the PR + or - but-  
ton during normal TV viewing.  
If you wish to select a skipped programme, directly enter the programme number with the NUMBER buttons  
or select it in the programme edit or EPG.  
Press the EXIT button to return to TV viewing.  
4
ALocking a programme (In Lock System On mode only)  
Select a programme to be locked with the D E or F G button.  
or or  
1
2
3
Press the GREEN button. The lock symbol will appear in front of that programme number.  
Press the GREEN button again to release this function.  
Note :  
To watch a locked programme, input a 4-digit password in Lock system. Be sure to remember this number!  
If you forget your password, press ‘7, ‘7, ‘7, ‘7’ on the remote control handset.  
If you select another programme after releasing a locked programme and then return to the locked programme  
within 1 minute, there is no need to input a password to select the locked programme.  
G
G
G
ASelecting favourite programme  
Select your favourite programme number by pressing D E or F G button and then press the FAV but-  
or or  
ton on your remote control handset.  
1
It will automatically include the selected programme into your favourite programme list.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
5V ANTENNA POWER  
(IN DIGITAL MODE ONLY)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Even if there is not a special 5V adapter power in the exter-  
nal antenna, this function can output 5V in the TV.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
Press the MENU button and then D E button to  
or  
VOL  
PR  
1
2
3
SETUP  
select the  
menu.  
Press the G button and then use D E button to  
or  
SETUPG  
Auto Tuning  
select 5V Antenna Power  
.
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
Press the G button and then use D E button to  
or  
OPTION  
SCREEN  
D V R  
select On or Off  
.
CI Information  
5V Antenna Power On  
(short circuits), it will automatically return to  
In  
, if the TV is overloaded  
Off  
.
Move MENU Prev.  
Antenna feed overloaded.  
The message “  
1
Automatically switched off.  
” will appear.  
Press the EXIT button to return to normal TV viewing.  
4
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
G
Off  
On  
Software Update  
Diagnostics  
CI Information  
BOOSTER (IN DIGITAL MODE ONLY)  
If reception is poor select Booster to On.  
If TV signal is strong, select Booster to Off.  
2 3  
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
Press the MENU button and then D E button to  
or  
1
2
G
Off  
On  
SETUP  
select the  
menu.  
CI Information  
Press the G button and then use D E button to  
or  
select Booster  
.
Press the G button and then use D E button to  
or  
3
4
2 3  
select On or Off  
.
Press the EXIT button to return to normal TV viewing.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE UPDATE  
(IN DIGITAL MODE ONLY)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Software Update means software can be downloaded through  
TIME  
SHIFT  
TIME  
SHIFT  
the digital terrestrial broadcasting system.  
After a Software Update, HDD formatting may be necessary.  
In this case, the HDD Failure message is displayed in the DVR  
Home menu.  
MARK  
FAV  
VOL  
PR  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
SETUP  
select the  
menu.  
SETUPG  
Auto Tuning  
Press the G button and then D E button to select  
or  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
Software update  
.
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
or  
Off On  
or  
.
CI Information  
On  
• If you select  
, a user confirm message box will be  
Move MENU Prev.  
displayed to notify that new software is found.  
1
Press the EXIT button to return to normal TV viewing.  
4
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
G
Off  
On  
* When setting “Software Update”  
CI Information  
Occasionally, a transmis-  
sion of updated digital  
software information will  
result in the following  
menu on the TV screen.  
2 3  
- During Progress of a Software Update,  
please note the following:  
YES  
Select  
using the F  
• Power to the TV must not be interrupted.  
• The TV must not be switched off.  
• The antenna must not be disconnected.  
• During this time, you should not switch off  
the power to the TV.  
or G button and you will  
see the following picture.  
• At this time, you should not work power  
On/Off.  
• After Software Update, you can confirm the  
updated software version in Diagnostics  
menu.  
• OTA cannot be performed while the DVR  
function(recording, playback) is running.  
After the Software Update  
is complete, the System  
takes about one minute to  
restart.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
DIAGNOSTICS  
(IN DIGITAL MODE ONLY)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function enables you to view information on the  
Manufacturer, Model/Type, Serial Number and Software  
Version.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
This displays the information and signal strength of the  
tuned MUX.  
VOL  
PR  
This displays the signal information and service name of the  
selected MUX.  
SETUPG  
Auto Tuning  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
MENU  
SETUP  
Press the  
select the  
button and then D  
menu.  
button to  
E
or  
1
2
3
4
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
OPTION  
SCREEN  
D V R  
CI Information  
Press the G button and then use D E button to  
or  
Diagnostics  
select  
.
Move MENU Prev.  
1
Press the G button to display Manufacturer,  
Model/Type, Serial Number and Software Version.  
Auto Tuning  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
EXIT  
Press the  
button to return to normal TV viewing.  
Software Update  
Diagnostics  
G
To Set  
CI Information  
2
Enginee
Channel 30  
i
Manufactur
Transmitter : Teracom_Mux_2  
Model / Typ
Signal strength  
53%  
Serial No.  
Software ve
Signal quality  
100%  
CH 30  
CH 34  
1 YLE PEU  
3 YLE TV2  
5 YLE FST  
1 YLE TV1  
4 YLEQ  
6 YLEN KLASS  
7 YLE FSR+  
8 YLE24  
Back  
Select  
Menu  
Prev.  
3
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CI [COMMON INTERFACE] INFORMATION  
(IN DIGITAL MODE ONLY)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function enables you to watch some scrambled services (pay ser-  
vices). If you remove the CI Module, you cannot watch pay services.  
When the module is inserted into the CI slot, you can access the module  
menu.  
TIME  
SHIFT  
TIME  
SHIFT  
To purchase a module and smart card, contact your dealer. Do not repeat-  
edly insert or remove a CAM module from the TV. This may cause a mal-  
function. When the TV is turned on after inserting a CI Module, you may  
not have any sound output.  
MARK  
FAV  
VOL  
PR  
This may be incompatible with the CI module and smart card.  
CI (Common Interface) functions may not be possible depending upon  
the country broadcasting circumstances.  
SETUPG  
Auto Tuning  
Manual Tuning  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Press the MENU button and then D E button to  
or  
1
2
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
SETUP  
select the  
menu.  
OPTION  
SCREEN  
D V R  
CI Information  
Press the G button and then D E button to select  
or  
CI Information  
.
Move MENU Prev.  
1
Press the G button and then OK button.  
3
4
Auto Tuning  
Press the D E button to select the desired item:  
or  
Module information, smart card information, lan-  
guage, or software download etc.  
Manual Tuning  
Programme Edit  
5V Antenna Power  
Booster  
Software Update  
Diagnostics  
CI Information  
G
Module  
Press the OK button.  
5
6
Press the EXIT button to return to normal TV viewing.  
2 3  
• This OSD is only for illustration and the menu  
Viaccess Module  
options and screen format will vary according to  
the Digital pay services provider.  
Consultations  
Authorizations  
Module information  
• It is possible for you to change CI (Common  
Interface) menu screen and service by consulting  
your dealer.  
Select the item  
4 5  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
BACK  
MENU  
DVR  
OK  
AUTO PROGRAMME TUNING  
(IN ANALOGUE MODE)  
EXIT  
GUIDE  
TIME  
SHIFT  
TIME  
SHIFT  
All stations which can be received are stored by this method. It  
is recommended that you use Auto tuning during installation of  
this TV.  
MARK  
FAV  
VOL  
PR  
It is not possible to use this function while recording a pro-  
gramme.  
MUTE  
1
4
2
3
6
5
8
0
MENU  
SETUP  
Press the  
select the  
button and then D  
menu.  
button to  
E
or  
1
2
3
7
9
LIST  
Q.VIEW  
Press the G button and then D  
button to select  
E
or  
Auto Tuning  
.
System  
Press the G button to select  
system with the F button;  
. Select a TV  
SETUPG  
Auto Tuning  
G
or  
Manual Tuning  
Programme Edit  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
L
: SECAM L/L(France)  
BG  
: PAL B/G, SECAM B/G (Europe / East Europe /  
OPTION  
SCREEN  
D V R  
Asia / New Zealand / M.East / Africa / Australia)  
I
: PAL I/II (U.K. / Ireland / Hong Kong / South  
Africa)  
DK  
: PAL D/K, SECAM D/K (East Europe / China /  
Africa / CIS)  
Move MENU Prev.  
Storage From  
Press the E button to select  
.
4
5
1
Select the initial programme number with the F  
G
or  
Storage From  
button or NUMBER buttons on the  
menu.  
Auto Tuning  
Manual Tuning  
Programme Edit  
G
System  
BG  
Storage From  
Start  
2
Start  
Press the E button to select  
.
The station name is stored for stations which broad-  
cast VPS (Video Programme Service), PDC  
(Programme Delivery Control) or TELETEXT data.  
If no station name can be assigned to a station, the  
C
channel number is assigned and stored as (V/UHF  
S
2 3 4 5  
01-69) or (Cable 01-47), followed by a number.  
To stop auto tuning, press the MENU button.  
Programme Edit  
When auto tuning is complete, the  
menu appears on the screen.  
Programme Edit  
See the ‘  
stored programme.  
’ section to edit the  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK  
MENU  
DVR  
OK  
MANUAL PROGRAMME TUNING  
(IN ANALOGUE MODE)  
EXIT  
GUIDE  
TIME  
SHIFT  
TIME  
SHIFT  
Manual Tuning lets you manually tune and arrange the stations in  
whatever order you desire.  
MARK  
FAV  
It is not possible to use this function with TimeShift Mode On.  
VOL  
PR  
It is not possible to use this function while recording a pro-  
gramme.  
MUTE  
1
4
2
3
6
5
8
0
Press the MENU button and then D E button to  
or  
1
2
3
7
9
SETUP  
select the  
menu.  
LIST  
Q.VIEW  
Press the G button and then D E button to select  
or  
Manual Tuning  
.
Storage  
Press the G button to select  
.
SETUPG  
Auto Tuning  
Manual Tuning  
Programme Edit  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Select the desired programme number with the F  
G
or  
menu.  
Storage  
button or NUMBER buttons on the  
OPTION  
SCREEN  
D V R  
System  
Press the E button to select  
system with the F G button;  
. Select a TV  
4
or  
L
: SECAM L/L(France)  
BG  
: PAL B/G, SECAM B/G (Europe / East Europe /  
Move MENU Prev.  
Asia / New Zealand / M.East / Africa / Australia)  
I
: PAL I/II (U.K. / Ireland / Hong Kong / South  
Africa)  
DK  
1
: PAL D/K, SECAM D/K (East Europe / China /  
Africa / CIS)  
Auto Tuning  
Manual Tuning  
Programme Edit  
Storage  
System  
Band  
1
G
Band  
V/UHF Cable  
Press the E button to select  
. Press the F  
as required.  
G
BG  
or  
5
6
V/UHF  
1
button to select  
or  
Channel  
Fine  
Channel  
Press the E button to select  
. You can  
Search  
Name  
select the desired channel number with the F  
button or NUMBER buttons.  
G
or  
C
01  
If possible, select the channel number directly with  
the NUMBER buttons.  
2 3 4  
6 7 8  
5
9
Search  
Press the E button to select  
. Press the F  
or  
7
G button to commence searching. If a station is  
found the search will stop.  
Press the OK button to store settings.  
8
9
To store another station, repeat steps 3 to 8.  
Press the EXIT button to return to normal TV viewing.  
10  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
FINE TUNING (IN ANALOGUE MODE)  
Normally fine tuning is only necessary if reception is poor.  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
Press the MENU button and then D E button to  
or  
1
2
3
4
SETUP  
select the  
menu.  
VOL  
PR  
Press the G button and then D E button to select  
or  
Manual Tuning  
.
SETUPG  
Auto Tuning  
Manual Tuning  
Programme Edit  
Press the G button and then D E button to select  
or  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Fine  
.
Press the G button and then F G button to fine  
or  
tune for the best picture and sound.  
OPTION  
SCREEN  
D V R  
Press the OK button to store settings.  
5
6
Press the EXIT button to return to normal TV viewing.  
Move MENU Prev.  
1
Auto Tuning  
Manual Tuning  
Programme Edit  
Storage  
System  
Band  
1
ASSIGNING A STATION NAME  
(IN ANALOGUE MODE)  
BG  
V/UHF  
1
Channel  
Fine  
F G  
You can assign a station name to each programme number.  
Search  
Name  
C
01  
Store  
Press the MENU button and then D E button to  
or  
1
2
3
4
2 3 4  
5
SETUP  
select the  
menu.  
Press the G button and then D E button to select  
or  
Manual Tuning  
.
Auto Tuning  
Manual Tuning  
Programme Edit  
Storage  
System  
Band  
1
BG  
Press the G button and then D E button to select  
or  
V/UHF  
1
Name  
.
Channel  
Fine  
Press the G button and then D E button. You can  
or  
Search  
Name  
A
Z
0
9
use the alphabet to , numbers to , +/ -, and  
blank.  
D
E
C
01  
F
G
Press the F G button to select the position and  
or  
make your choice of the second character, and so on.  
5
2 3 4  
6
5
Press the OK button to store settings.  
6
7
Press the EXIT button to return to normal TV viewing.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMME EDIT  
(IN ANALOGUE MODE)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function enables you to delete or skip stored programmes. You  
can also move some programmes to other programme numbers or  
copy blank programme data into a selected programme number.  
TIME  
SHIFT  
TIME  
SHIFT  
It is not possible to use this function while recording a programme.  
SETUPG  
Auto Tuning  
Manual Tuning  
Programme Edit  
PICTURE  
AUDIO  
TIME  
O
O
O
O
O
O
Press the MENU button and then D E button to  
or  
1
2
3
SETUP  
select the  
menu.  
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
or  
Programme Edit  
.
Press the Gbutton to display the Programme Edit menu.  
Move MENU Prev.  
1
ADeleting a programme  
Select a programme to be deleted with the D E or  
or  
a
Auto Tuning  
Manual Tuning  
Programme Edit  
G button.  
F
or  
To Set  
G
Press the RED button twice. The selected programme  
is deleted, all the following programmes are shifted  
up one position.  
b
ACopying a programme  
2
a
Select a programme to be copied with the D E or  
or  
G button.  
F
or  
b
Press the GREEN button. All the following programmes  
are shifted down one position.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
MARK  
FAV  
VOL  
PR  
MUTE  
BACK  
MENU  
DVR  
1
4
2
3
6
EXIT  
GUIDE  
5
8
0
OK  
TIME  
SHIFT  
TIME  
SHIFT  
7
9
LIST  
Q.VIEW  
AMoving a programme  
Select a programme to be moved with D E or F G button.  
or or  
a
Press the YELLOW button.  
b
c
Move the programme to the desired programme number with the D E or F G button.  
or or  
Press the YELLOW button again to release this function.  
d
ASkipping a programme number  
a
Select a programme number to be skipped with D E or F G button.  
or or  
Press the BLUE button. The skipped programme number turns to blue.  
b
c
Press the BLUE button to release the skipped programme.  
d
When a programme number is skipped it means that you will be unable to select it using the PR + or -  
button during normal TV viewing.  
If you wish to select the skipped programme, directly enter the programme number with the NUMBER  
buttons or select it in the programme edit or table menu.  
ASelecting a Favourite Programme  
a
Select your favourite programme number with D E or F G button.  
or or  
Press the FAV button.  
The selected programme will be added to the favourite programme list.  
b
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXIT  
GUIDE  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
SELECTING THE PROGRAMME TABLE  
MARK  
FAV  
You can check which programmes are stored in the memory  
by displaying the programme table.  
VOL  
PR  
1
4
2
5
3
6
7
8
0
9
LIST  
Q.VIEW  
ADisplaying programme LIST  
Press the LIST button to display the PROGRAMME  
LIST menu.  
1
DTV List  
D
801 YLE TV1  
802 YLE TV2  
803 YLE FST  
804 YLE24  
805 YLE Teema  
806 TV4  
The programme list appears on the screen.  
You may find some blue programmes.  
These have been set up to be skipped by auto  
programming or in the programme edit mode.  
• Some programmes with the channel number shown  
in the programme LIST indicate there is no station  
name assigned.  
< In Digital Mode >  
ASelecting a programme in the programme list  
Programme List  
0
1
2
3
4
5
BBC1  
Select a programme with the D E button.  
or  
1
2
C
C
C
01  
04  
05  
Press the OK button. The TV switches to the chosen pro-  
gramme number.  
BLN 2  
05  
C
APaging through a programme list  
< In Analogue Mode >  
Programme LIST pages contain 100 programmes in total.  
Press the D Ebutton repeatedly to turns the pages.  
or  
1
2
Press the LIST button to return to normal TV viewing.  
ADisplaying the favourite programme table  
Mini Glossary  
Displayed when the  
Locked Programme.  
Press the FAV button to display the Favourite  
Programme table menu.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
INPUT SOURCE SELECTION  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Selects a label for each input source which is not in use.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
MENU  
1
Press the  
button and then use D E button  
or  
OPTION  
to select the  
menu.  
OPTION G  
SCREEN  
D V R  
O
O
Factory Mode  
Press the G button and then use D E button to  
or  
2
3
Input Label  
select  
.
Move MENU Prev.  
1
Press the G button and then use D E button to  
or  
select the source: AV1, AV2, AV3, Comp., RGB,  
HDMI1, HDMI2 or HDMI3.  
Language  
Country  
Lock System  
Parental Control  
Input Label  
AV1  
AV2  
AV3  
Comp.  
RGB  
G
SIMPLINK  
Factory Mode  
HDMI1  
HDMI2  
HDMI3  
Press the F G button to select the label.  
or  
4
5
Press EXIT button to return to normal TV viewing.  
2 3 4  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FUNCTION  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This fundtion operates only with devices with the SIMPLINK logo.  
Please check the SIMPLINK logo.  
TIME  
SHIFT  
TIME  
SHIFT  
This TV might not function properly when using it with other prod-  
ucts with HDMI-CEC function.  
MARK  
FAV  
VOL  
PR  
This allows you to control and play other AV devices connected to  
the display through HDMI cable without additional cables and  
settings.  
On  
If you require the SIMPLINK menu, select “ .  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
OPTION  
select the  
menu.  
OPTION G  
SCREEN  
O
O
Factory Mode  
D V R  
Press the G button and then D E button to select  
or  
SIMPLINK  
.
Move MENU Prev.  
1
Press the G button and then D E button to select  
or  
Off On  
or  
.
Language  
Country  
Lock System  
Parental Control  
Input Label  
Press the EXIT button to return to normal TV viewing.  
SIMPLINK  
Factory Mode  
G
Off  
On  
2 3  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV /PROGRAMME CONTROL  
SIMPLINK Functions  
Disc playback  
Control connected AV devices by pressing the D  
buttons.  
F
or or or  
G, OK,  
,
,
,
,
,
and  
E
Direct play  
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.  
Select AV device  
Enables you to select one of the AV devices connected to the TV and operate it.  
Power off all devices  
When you switch off the TV, all connected devices are turned off.  
Switch audio-out  
Offers an easy way to switch audio-out.  
*
A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not provide this function.  
SIMPLINK Menu  
Press the D  
F
G button and then OK button to select the desired SIMPLINK source.  
E
or or or  
1
TV viewing :  
Switch to the previous TV programme  
regardless of the current mode.  
1
2
2
3
DISC playback :  
Select and play connected discs.  
When multiple discs are available, the titles of discs are  
conveniently displayed at the bottom of the screen.  
Selected Device  
3
4
When no device is connect-  
ed (displayed in gray)  
VCR playback :  
VCR.  
control the connected  
4
5
HDD Recordings playback :  
recordings stored in HDD.  
control  
5
When a device is connected  
(displayed in bright colour)  
Audio Out to Home theatre/Audio Out to TV:  
Select Home theatre or TV speaker for Audio Out.  
!
NOTE  
G Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the  
SIMPLINK device with the HDMI cable.  
G After connecting the HDMI terminal for the home theatre with the SIMPLINK function using the above  
method, connect the DIGITAL AUDIO OUT terminal on the back of the TV to the DIGITAL AUDIO IN ter-  
minal on the back of the SIMPLINK device with the OPTICAL cable.  
G When operating an external device with SIMPLINK, press the TV button from the MODE buttons on the  
remote control.  
G When you switch the Input source using the INPUT button on the remote control, you can stop the opera-  
tion of a device controlled by SIMPLINK.  
G When you select or operate a media device with home theatre function, the speaker automatically switches  
to home theatre speaker (HT speaker).  
G If SIMPLINK is operated, the keys such as stop / play / pause / fast reverse / fast forward / chapter skip  
are used for driving the SIMPLINK device, but are not used for the DVR feature.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
TIMESHIFT MODE (PAUSE & REPLAY OF LIVE TV)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function allows the unit to automatically record live TV  
and make it available for viewing at any time.  
TIME  
SHIFT  
TIME  
SHIFT  
With the TimeShift Mode turned on, you may pause and rewind  
normal TV viewing at any time without missing any of the live  
broadcast.  
MARK  
FAV  
(TimeShift Mode and Recording functions may not work if the  
signal strength is weak.)  
VOL  
PR  
SETUP  
O
O
O
O
O
O
TimeShift Mode  
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
PICTURE  
AUDIO  
TIME  
MENU  
Press the  
button and then use D  
menu.  
/
E button  
1
2
3
4
DVR  
to select the  
OPTION  
SCREEN  
D V R G  
Press the G button and then use D  
TimeShift Mode  
/
/
E button to  
E button to  
select the  
.
Move MENU Prev.  
1
Press the G button and then use D  
On Off  
TimeShift Mode  
Off  
G
select  
or  
.
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
On  
Press the EXIT button to return to normal TV viewing.  
2
3
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
Using the TimeShift Mode function  
LIVE  
1
2
3
4
The ‘Progress Bar’?  
TimeShift Mode On  
, press the  
OK  
button.  
1
After selecting  
This function indicates what DVR reviewing is pos-  
sible,a current on-screen and live broadcasting  
position.  
I
As soon as TimeShift Mode starts, a progress bar indicat-  
ing the current recording status is displayed in the bot-  
tom of the screen.  
1
Status of current displayed video.  
urrent save time.  
2
C
I
I
EXIT  
Press the  
button to hide the ‘Progress Bar’ or press  
3
15 minute intervals from TimeShift Mode start  
OK  
the  
button to display the 'Progress Bar'.  
time. (Total - one hour).  
This function is preserved even when changing a pro-  
gramme or progressing the TimeShift Mode.  
4
Indicates current TimeShift Mode position.  
When finishinging with the TimeShift Mode function, enter  
2
TimeShift Mode Off  
the option menu and turn  
.
!
NOTE  
(
)
then restored in the digital signal. The unit will  
attempt to reduce excessive picture interference.  
DVR Digital Video Recorder : A device which  
records and plays broadcast programme contents  
onto a hard disk in TV or SET TOP BOX.  
TimeShift Mode is available in DTV, TV, AV1,  
AV2, AV3 mode.  
The total storage space of the hard-disk is 160 GB.  
4 GB minimum is reserved for TimeShift Mode.  
TimeShift Mode is available for Audio only channels.  
When turning power on, it may take up to a maxi-  
mum of 3 minutes to initialise the HDD.  
( )  
Pause II  
When pressing the  
button in TimeShift  
Off mode, TimeShift starts. TimeShift remains active  
even when you change channels.  
The Recording function will not initiate for a  
copy-protected programme.  
In the case of DTV, the maximum DTV recording  
duration displayed as Free space may be slightly  
different from the actual maximum recording  
duration.  
Because an analogue broadcast is converted to a  
digital signal, video which contains rapid move-  
ment may show "cross stripes". This happens  
when the analogue signal is compressed and  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
Using the TimeShift Mode function, play  
When in TimeShift Mode, the following options are available.  
DELAYED  
BACK  
MENU  
DVR  
EXIT  
GUIDE  
Indicates that the current broadcast and displayed video differ.  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
Play  
Pause  
MARK  
Using the remote control  
You can shift playback to any point within the recorded programme.  
When playing,  
(
)
REW FF  
F
FF  
FFF  
repeatedly, press the  
button to speed up ->  
->  
->  
FFFF -> FFFFF .  
FF or GG  
(
)
FF GG  
GG GGG  
repeatedly, press the  
button to speed up  
->  
-> ->  
GGGG  
GGGGG .  
I
Pressing these buttons repeatedly increases the fast forward/reverse speed.  
Press the GGI button to jump about 20 seconds forward.  
IFF  
GGI  
or  
II  
I
IFF  
Press the  
button to jump about 8 seconds back.  
( )  
Pause II  
During playback, press the  
button.  
I
Still screen is displayed.  
I
( )  
Pause II  
Repetedly press the  
button to advance frame by frame.  
I
( )  
Pause II  
icon is displayed.)  
FF(GG)  
button for slow motion  
Press the  
(the  
button and then use the  
I
When using the F or G button during playback a cursor indicating the position  
can be viewed on the screen.  
F or G  
( )  
PLAY G  
( )  
PLAY G  
Press the  
button to return to normal playback.  
LIVE TV  
If you want to return to the current live broadcast, press the LIVE TV button.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
INSTANT RECORDING  
Use this function to record the programme you are watching on the main screen  
(Analogue or Digital broadcast).  
Instant Record  
This function records the currently displayed programme.  
Select the programme you wish to record and then press the O button.  
1
During recording  
REC  
is displayed. Use this feature to record up to 2  
hours of programming.  
If you wish to stop recording, press the A button.  
2
I
While recording, if you press the A button before 10 seconds  
of recording time has passed, this message is displayed.  
Recording failed.  
Length is less than 10 seconds.  
I
While Audio recording, if you press the A button before 30  
seconds of recording time has passed, this message is dis-  
played.  
Recording failed.  
Length is less than 30 seconds.  
I
If you press the A button after more than 10 seconds of  
recording time has passed, this message is displayed.  
Recording completed.  
You can increase or decrease the recording time by pressing the O button while  
recording. After pressing the O button, press the F or G buttons repeatedly to  
increase or decrease the recording time. Each time you press F or G button  
the recording duration changes as shown below.  
3
-
-
-
-
-
+10min > +20min > +30min > +40min > +50min > +60min  
No Change  
-
-
-
-
-
-10min > -20min > -30min > -40min > -50min > -60min  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The extra recording time added to the existing setting  
equals the final recording time.  
Recording Options  
Cricket World Cup  
23:40~00:40  
23:57  
Recording time  
23:54~01:55 (2 min recorded)  
OK  
. The Status  
After adjusting the recording time, select  
bar will be displayed.  
4
Set duration  
No change G  
F
Total recording duration  
OK  
Cancel  
REC  
0:00:00 / 2:00:00  
3
Elapsed recording time  
I
EXIT  
Press the  
button to hide the Status bar. Press the  
OK  
button to display the Status bar.  
Recording stops when the selected duration is reached or  
when you press the A button.  
5
Although recording has stopped, the TimeShift Mode feature  
remains active.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
NOTE  
!
viewing the SCART Auto AV, but the Analog TV  
source is recorded while viewing the Analog TV  
source. When reserved recording is performed,  
even if the channel is set to the Analog TV, if the  
Scart Auto AV operates, the Auto AV source is  
recorded.  
When recording, if the available storage space is  
not sufficient, the recording will automatically  
Stop.  
In Radio mode, recordings of less than 30 sec-  
onds will not be saved. In other modes, record-  
ingsoflessthan10secondswillnotbesaved.  
When the programme switch key is pressed while  
recording the Analog TV source, the channel is  
switched to the Digital TV source. However, when  
the numeric key is pressed, it is not switched.  
No data will be saved on paid channels with no  
CI Card or expired period of validity of CI Card,  
in invalid services and in data only channels (ex.  
MHEG) In order to save disk space.  
Themaximumschedulerecordingdurationis12  
hours. The maximum number of schedule record-  
ing is 60 in the UK and 30 in the rest of the  
world.  
The recording function will not initiate for a  
copy-protected programme.  
The displayed time differs slightly from the actu-  
al time.  
When Manual Recording, the default sound settings  
apply.  
When there is no signal or a film source is being  
viewed, the displayed time may differ slightly  
from the actual time.  
When the recording time conflicts with that of  
existing recordings, the Collision message is dis-  
played in a Popup window in the UK and record-  
ing is not registered in the rest of the world.  
Recording is not possible with copy-protected  
programmes.  
When recording a DTV source, you cannot watch  
Scrambled channels (paid channel).  
I
When Instant Recording, this message is dis-  
played.  
When you choose an scrambled channel (paid  
channel), the following message is displayed.  
Cannot record due to copy protection.  
Cannot watch a scrambled programme.  
while recording another DTV programme.  
I
When Manual Recording, this message is dis-  
played.  
When you change channels while recording an  
Analog TV source, the channel will be switched  
to the DTV mode.  
Schedule recording cannot start.  
Copy protected.  
Broadcast materials are protected by copyright  
and that recording and playback of certain mate-  
rial would only be permissible by permission of  
the copyright owner. Audio and video recordings  
you make using this recorder are for your per-  
sonal use only. You may not sell, lend or rent  
them to other people.  
When a poor quality external source is recorded  
(for example old VHS tape) the quality of the  
recording will not be optimal.  
Programmes are stored separately according to  
the colour system used. e.g. PAL/NTSC.  
Recording is based on the currently being viewed  
source. The Auto AV source is recorded while  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL RECORDING  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function is used to perform reserved recording.  
This function is available in the DVR menu.  
TIME  
SHIFT  
TIME  
SHIFT  
When Manual Recording,the default sound of the TV is stored.  
MARK  
FAV  
VOL  
PR  
Home  
DVR  
Home  
Press the  
button to display  
menu. Use the  
and then  
Free Space  
1
2
Manual Record  
or E button to select the  
D
OK  
use the  
or G button.  
Recorded TV  
Programme Guide  
Schedule List  
Manual Record  
TV Menu  
Manual Record  
The  
Use the D or E or F or G button to set the  
Programme Date Start/End Repeat  
screen is displayed as shown below.  
Input  
,
,
,
,
.
1
Input  
: Select the input source from the DTV, RADIO,  
TV, AV1, AV2, AV3.  
Programme  
: Select either the current programme or a  
scanned programme.  
Date  
: You can select a date up to one month in advance.  
Start/End  
: Ensure you have set these correctly.  
Repeat  
: Choose either Once, Daily, Weekly, Weekend,  
Weekday.  
Manual Record  
OK  
button.  
After setting the  
, press the  
3
Button Function in Manual Record Mode  
Remote Control Buttons Function  
Manual Record  
Fri Mar 30 10:24  
Select required items with Up/down button.  
Selects the required fields.  
OSD disappears.  
Input  
D
F
E
G
or  
or  
Programme  
1 BBC ONE  
Date  
Start  
End  
Repeat  
DTV  
Fri Mar 30  
10:26  
10:56  
Once  
EXIT  
Navigation  
Modify  
Enter  
Cancel  
Exit  
Exit  
Displays the reservation list after the  
recording has been registered.  
2
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
RECORDED TV PROGRAMME LIST  
You can view the recorded programme list at a glance.  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function is also available in the DVR menu.  
Information function is only applicable when the country selected is UK.  
TIME  
SHIFT  
TIME  
SHIFT  
DVR  
HOME  
menu.  
Press the  
button to display  
1
Recorded TV  
Use the D or E button to select  
and then use  
MARK  
FAV  
OK  
the  
or G button.  
VOL  
PR  
Recorded TV  
Home  
Input  
Date  
: DTV 1  
: Fri Mar 30 2007  
Free Space  
Duration : 30m  
Quality  
: High  
Free Space  
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
Recorded TV  
To Buy or Not to Buy  
Fri  
Mar 30  
Mar 30  
10:49  
10:36  
In the Night Garden  
Fri  
Fri  
Programme Guide  
Schedule List  
Manual Record  
TV Menu  
Schools : Primary Geog  
Mar 30  
10:36  
Class TV : Revisewise  
30 Jahre ‘68 : Revolte  
Fri  
Fri  
Mar 30  
Mar 30  
10:21  
10:20  
INFO  
Information  
Move Page  
EXIT  
MARK  
Exit  
1
Popup Menu  
PR  
Mark  
Recorded TV  
Free Space  
When the highlighted recording is a locked programme or a  
rated programme, the preview window displays ‘LOCKED SERVICE’  
instead of the Play screen.  
2
Input  
Date  
: DTV 1  
: Fri Mar 30 2007  
LOCKED  
SERVICE  
Duration : 30m  
Quality : High  
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
Mar 30 10:49  
If you wish to play locked or rated recordings, you must enter  
the password.  
To Buy or Not to Buy  
Fri  
Enter Password
In the Night
10:36  
10:36  
Schools : Pri
-
-
-
-
Class TV : Revisewise  
Fri  
Mar 30  
Mar 30  
10:21  
10:20  
30 Jahre ‘68 : Revolte  
Fri  
INFO  
EXIT  
MARK  
Information  
Move Page  
Exit  
PR  
Mark  
Popup Menu  
Recorded TV  
2
3
3
In the case of recording an Audio only programme the preview  
window displays ‘AUDIO ONLY’ instead of the Play screen.  
Input  
Date  
Duration : 30m  
Quality : High  
: DTV 1  
3
: Fri Mar 30 2007  
AUDIO ONLY  
Free Space  
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
To Buy or Not to Buy  
Fri  
Mar 30  
10:49  
10:36  
In the Night Garden  
Fri  
Fri  
Mar 30  
Mar 30  
Schools : Primary Geog  
10:36  
Class TV : Revisewise  
30 Jahre ‘68 : Revolte  
Fri  
Fri  
Mar 30  
Mar 30  
10:21  
10:20  
INFO  
EXIT  
Information  
Move Page  
Exit  
MARK  
Popup Menu  
Recorded TV  
PR  
Mark  
When scheduled recording fails for various reasons such as  
signal strength, it is registered in the Recorded TV List and  
the Preview window displays the OSD as shown in the diagram.  
When you press the OK button to execute the failed recording,  
a message is displayed as shown in the picture.  
4
Input  
Date  
Duration : 30m  
Quality : High  
: DTV 1  
: Fri Mar 30 2007  
Free Space  
23h 01m  
3h 01m  
Page 3/27  
To Buy or Not to Buy  
0 Marked  
Fri  
Mar 30  
10:49  
6  
Schedule recordingfailed  
due to nosignal.  
In th
SchDoyou want to delete?
6  
Clas
Fri  
NO  
1  
10:20  
YES  
30 Jahre ‘68 : Revolte  
Mar 30  
INFO  
EXIT  
MARK  
Information  
Move Page  
Exit  
Popup Menu  
PR  
Mark  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Recorded programme Selection and Popup Menu  
TIME  
SHIFT  
TIME  
SHIFT  
The preview recorded list is shown above.  
MARK  
FAV  
VOL  
PR  
Recorded TV  
Free Space  
Input  
Date  
: DTV 1  
: Fri Mar 30 2007  
Duration : 30m  
Quality : High  
Use the PR + or PR - button for page up/down navigation.  
1
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
To Buy or Not to Buy  
In the Night Garden  
Fri  
Mar 30  
10:49  
10:36  
Fri  
Fri  
Mar 30  
Mar 30  
Schools : Primary Geog  
10:36  
Class TV : Revisewise  
30 Jahre ‘68 : Revolte  
Fri  
Fri  
Mar 30  
Mar 30  
10:21  
10:20  
MARK  
Use the  
button to delete from the list. A  
is dis-  
2
3
INFO  
EXIT  
MARK  
Information  
Move Page  
Exit  
played next to the preview window if an item is marked.  
Popup Menu  
Recorded TV  
PR  
Mark  
1
Input  
Date  
Duration : 30m  
Quality : High  
: DTV 1  
: Fri Mar 30 2007  
Free Space  
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
10:49  
Use D or E button to navigate the appropriate thumbnail  
photo, then press the  
Menu.  
DTV 1  
10:49~11:19  
To Buy or Not to Buy  
OK  
Play  
button to open the Pop-up  
In the Night Garden  
10:36  
Mark All  
Delete  
Schools : Primary Geog  
Class TV : Revisewise  
30 Jahre ‘68 : Revolte  
10:36  
10:21  
Rename  
Cancel  
Fri  
Mar 30  
10:20  
Play  
: Begin playback of the selected recording.  
INFO  
EXIT  
MARK  
Information  
Move Page  
Exit  
Popup Menu  
Recorded TV  
PR  
Mark  
Mark All  
: mark all recordings on the screen.  
2
Unmark All  
: Change marked recordings to unmarked recordings.  
: Delete the selected recording.  
Delete  
Rename  
Input  
Date  
: DTV 1  
: Fri Mar 30 2007  
Duration : 30m  
Quality : High  
: Edit the recorded programme title.  
: Close the Pop-up Menu.  
Free Space  
Cancel  
23h 01m  
3h 01m  
Page 3/27  
0 Marked  
10:49  
DTV 1  
10:49~11:19  
Play  
To Buy or Not to Buy  
In the Night Garden  
10:36  
Mark All  
Delete  
Schools : Primary Geog  
Class TV : Revisewise  
30 Jahre ‘68 : Revolte  
10:36  
10:21  
Rename  
Cancel  
Fri  
Mar 30  
10:20  
EXIT  
Repeatedly, press the  
button to return to TV viewing  
INFO  
EXIT  
MARK  
Information  
Move Page  
Exit  
4
Popup Menu  
PR  
Mark  
DVR  
Home  
menu.  
or press the  
button to return to the  
3
I
If the HDD has a problem performing a recording related  
function, this message is displayed.  
HDD initialisation in progress.  
Please try again later.  
I
If the temperature is below zero (0°), a warning message is  
displayed and you will not be able to use the DVR functions.  
Low temperature.  
DVR initialisation cannot start.  
4
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
Playing recorded programmes  
- You can play a selected programme from the recorded programme list.  
The ‘Progress Bar’?  
This function indicates what DVR  
reviewing is possible ,a current on-  
screen and live broadcasting position, a  
section of section-recording.  
Play a recorded programme.  
1
While playing, You will see a playback screen as shown below.  
2
1
Indicates progress of recorded  
I
Initially, an icon showing the current playback mode is displayed  
programme.  
PLAYING  
OK  
Press the  
button to display the progress bar  
2
.
Indicates status of recorded programme.  
3
I
Indicates elapsed playback time.  
EXIT  
To stop displaying the recorded programmes icon, press the  
button.  
4
Indicates total playback time.  
5
Indicates a quarter of programme runtime.  
PLAYING  
6
Indicates current playback position.  
1
2
3
4
5
6
Using the remote control  
You can shift playback to any point within the recorded programme.  
When playing,  
(
)
REW FF  
F
FF  
repeatedly, press the  
button to speed up ->  
-> ->  
FFF  
FFFF -> FFFFF .  
FF or GG  
(
)
FF GG  
GG GGG  
repeatedly, press the  
button to speed up  
->  
-> ->  
GGGG  
GGGGG .  
I
Pressing these buttons repeatedly increases the fast forward/reverse speed.  
Press the GGI button to jump about 20 seconds forward.  
IFF  
GGI  
or  
II  
I
IFF  
Press the  
button to jump about 8 seconds back.  
( )  
Pause II  
During playback, press the  
button.  
I
Still screen is displayed.  
I
( )  
Pause II  
Repetedly press the  
button to advance frame by frame.  
I
I
( )  
Pause II  
FF(GG)  
button for slow motion  
Press the  
(as showing the  
button and then use the  
.)  
When using the F or G button during playback the cursor can be viewed on the  
F or G  
screen.  
( )  
PLAY G  
( )  
PLAY G  
Press the  
button to return to normal playback.  
LIVE TV  
If you want to return to the current live broadcast, press the  
LIVE TV  
button.  
I
STOP(A)  
If you press the  
button, you can view live TV.  
A
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chase playback  
During recording, you can “Trick play” a programme that is being recorded  
without interrupting recording by using the Progress Bar.  
The ‘Progress Bar’?  
This function indicates what DVR  
reviewing is possible ,a current on-  
screen and live broadcasting position, a  
section of section-recording.  
Record a programme.  
1
While recording, You will see a playback screen as shown below.  
2
1
Indicates progress of recorded  
I
Initially, an icon showing the current playback mode is displayed  
programme.  
REC  
OK  
Press the  
button to display the progress bar  
2
.
Indicates status of recording programme.  
3
I
Indicates elapsed recording time.  
EXIT  
To stop displaying the recorded programmes icon, press the  
button.  
4
Indicates total recording time.  
5
Indicates a quarter of programme runtime.  
REC  
6
Indicates current playback position.  
1
2
3
4
5
6
Using the remote control  
You can shift playback to any point while recording programme.  
When playing,  
(
)
REW FF  
F
FF  
repeatedly, press the  
button to speed up ->  
-> ->  
FFF  
FFFF -> FFFFF .  
FF or GG  
(
)
FF GG  
GG GGG  
repeatedly, press the  
button to speed up  
->  
-> ->  
GGGG  
GGGGG .  
I
Pressing these buttons repeatedly increases the fast forward/reverse speed.  
Press the GGI button to jump about 20 seconds forward.  
IFF  
GGI  
or  
II  
I
IFF  
Press the  
button to jump about 8 seconds back.  
( )  
Pause II  
During recording, press the  
button.  
I
Still screen is displayed.  
I
( )  
Pause II  
Repetedly press the  
button to advance frame by frame.  
I
I
( )  
Pause II  
FF(GG)  
button for slow motion  
Press the  
(as showing the  
button and then use the  
.)  
When using the F or G button during recording the cursor can be viewed on  
F or G  
the screen.  
( )  
PLAY G  
( )  
PLAY G  
Press the  
button to return to normal playback.  
LIVE TV  
LIVE TV  
If you want to return to the current live broadcast, press the button.  
I
STOP(A)  
If you press the  
button, you can view live TV.  
A
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
SCHEDULE LIST  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function is used to show scheduled recordings.  
This function is available in the DVR menu.  
TIME  
SHIFT  
TIME  
SHIFT  
You can store up to 30 programmes.  
60 programmes can be stored in the United Kingdom.  
MARK  
FAV  
Home  
Free Space  
DVR  
Home  
Press the  
button to display  
menu. Use the  
and then use  
1
2
Schedule List  
or E button to select the  
D
Recorded TV  
OK  
the  
or G button.  
Programme Guide  
Schedule List  
Manual Record  
TV Menu  
Schedule List  
The  
screen is displayed as shown below.  
Use the D or E button to select a recorded programme.  
1
Button Function in Schedule List Mode  
Schedule List  
Remote Control Buttons Function  
This is BBC THREE  
DTV 7 BBC THREE  
Sun Apr 01 16:48~17:18 (30min)  
Mon Mar 26 15:47  
D
E
or  
Select programmes Up/down.  
Display Popup window  
OSD disappears.  
Page 1/1  
Repeat  
Title  
Programme  
1 C 01  
Date  
Start  
TV  
No title  
Wed Mar 28 15:18  
Once  
EXIT  
This is BBC THREE  
DTV 7 BBC THREE Sun Apr 01 16:48  
Weekly  
YELLOW  
BLUE  
PR D or E  
Enter Manual record mode.  
Change to Guide mode.  
Page Up/Down  
Exit  
PR  
Move Page  
Popup Menu  
Exit  
Manual Record  
Guide  
In UK, this function is available for use in the Overall Schedule mode.  
2
Popup Menu  
Function  
Schedule List  
Modify to the Schedule Recording.  
Delete Schedule Recording.  
Delete All Schedule Recording.  
Delete Popup window.  
Modify  
Delete  
Delete All  
Cancel  
Mon Mar 26 15:47  
Page 1/1  
This is BBC THREE  
DTV 7 BBC THREE  
Sun Apr 01 16:48~17:18 (30min)  
Title  
Programme  
1 C 01  
Date  
Start  
Repeat  
Once  
TV  
No title  
Wed Mar 28 15:18  
This is BBC THREE  
DTV 7 BBC THREE Sun Apr 01 16:48  
Weekly  
Modify  
Delete  
Delete All  
Cancel  
PR  
Move Page  
Exit  
Popup Menu  
Manual Record  
Exit  
Guide  
The contents below are only applicable when country selected is the UK.  
Schedule List  
Remote Control Buttons Function  
Catch me if you can  
Sat. Oct 30 19:10  
Page 1/1  
RED  
INFO i  
Select Overall Schedule/Weekly Schedule in turn.  
Detail information on or off.  
027 Discovery Channel Wed Oct 17 18:20 - 21:20  
Series Record  
Recommended  
Overall Schedule  
The Lord of the Rings  
Catch me if you can  
TV 11 DiscoveryRTime  
TV 1BBC (Weekdays)  
Ally Mcbeal (Weekends)  
DTV 4 Bloomberg (Weekly)  
Royal Ceremony  
Tue. Feb 13  
Tue. Feb 13  
Wed. Feb 14  
Wed. Feb 14  
Thu. Feb 15  
Fri. Feb 16  
Fri. Feb 16  
13:00  
15:12  
5:34  
6:00  
7:35  
15:21  
22:00  
INFO  
PR  
Move Page  
Information  
Manual Record  
Popup Menu  
Guide  
Weekly Schedule  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECORD QUALITY  
This function is not available while a recording is taking place.  
(Only for analogue schedule recording)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
SETUP  
O
O
O
O
O
O
TimeShift Mode  
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
PICTURE  
AUDIO  
TIME  
MENU  
Press the  
button and then use D  
menu.  
/
E button  
1
2
3
4
DVR  
to select the  
OPTION  
SCREEN  
D V R G  
Press the G button and then use D  
select Record Quality.  
/
/
E button to  
E button to  
Move MENU Prev.  
1
Press the G button and then use D  
TimeShift Mode  
High Normal  
or  
select  
.
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
G
High  
Normal  
Press the EXIT button to return to normal TV viewing.  
Only for analogue  
schedule recording  
(TV, AV1, AV2, AV3).  
2
3
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVR (DIGITAL VIDEO RECORDER)  
FORMAT HARD DISK  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Erases all programmes and initialises the hard drive.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
O
O
O
O
O
O
TimeShift Mode  
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
PICTURE  
AUDIO  
TIME  
MENU  
DVR  
Press the  
select the  
button and then use D  
menu.  
/
E button to  
1
2
3
OPTION  
SCREEN  
Press the G button and then use D  
HDD Format.  
/
E button to select  
D V R G  
Move MENU Prev.  
Press the G button to start HDD Format.  
1
I
if you press the G button, this message is displayed.  
TimeShift Mode  
Record Quality  
Recorded TV  
Schedule List  
Manual Record  
HDD Format  
Do you want to format HDD?  
Yes  
No  
G
To set  
I
if you select Yes, this message is displayed.  
HDD format in progress.  
2
3
I
When completing, this message is displayed.  
HDD initialisation successful.  
Press the EXIT button to return to normal TV viewing.  
4
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)  
This system has an Electronic Programme Guide (EPG) to help your navigation through all the  
possible viewing options.  
The EPG supplies information such as programme listings, start and end times for all available  
services. In addition, detailed information about the programme is often available in the EPG (the  
availability and amount of these programme details will vary, depending on the particular  
broadcaster).  
This function can be used only when the EPG information is broadcast by broadcasting companies.  
The EPG displays the programme details for next 8 days.  
Switch on/off EPG  
Press the GUIDE button to switch on EPG.  
1
Press the GUIDE or EXIT button again to switch off EPG and return to normal TV viewing.  
2
Select a programme  
Programme Guide  
1
BBC ONE  
DTV  
08:25 26 Mar  
09:00  
Press the D or E F or G, PR + or - button to  
select the desired programme, then the OK button,  
the popup window to select the function is displayed.  
,
08:00  
26 Mar  
08:30  
1
...  
Don’  
1
2
7
BBC ONE  
BBC TWO  
BBC THREE  
Breakfast  
...  
Cramp  
...  
Chuck  
...  
To  
...  
...  
...  
Number ja Nina a  
Lu  
This is BBC THREE  
...  
Young Dracula Class TV: CI  
...  
70 CBBC Channel  
80 BBC NEWS 24  
Dogstar  
Breakfast  
BBC News  
BBCi  
BBC News  
105 BBCi  
TV/RADIO  
Radio  
Popup  
Record  
Information  
Mode  
Date  
Manual Record  
Schedule List  
Button Function in NOW/NEXT Guide Mode  
Programme Guide  
Remote Control Buttons Function  
1
BBC ONE  
08:25 26 Mar  
NEXT  
RED  
Change EPG mode  
DTV  
NOW  
Don’t Get Done Get Dom  
1
2
7
BBC ONE  
Breakfast  
YELLOW  
BLUE  
Enter Manual Record setting mode  
Enter Schedule list mode  
Display Popup window  
Select NOW or NEXT Programme  
Select the Broadcast Programme  
Page Up/Down  
ChuckleVision  
Tommy Zoom  
BBC TWO  
This is BBC THREE  
Dogstar  
This is BBC THREE  
Young Dracula  
BBC THREE  
70 CBBC Channel  
80 BBC NEWS 24  
F
D
G
E
or  
or  
Breakfast  
BBCi  
BBC News  
BBCi  
105 BBCi  
PR + or -  
GUIDE/EXIT  
TV/RADIO  
INFO i  
TV/RADIO  
Radio  
Popup  
Record  
Manual Record  
Information  
Switch off EPG  
Mode  
Schedule List  
Select TV or RADIO Programme  
Detail information on or off.  
Select Record/delete the highlighted  
programme in turn.  
RECORD  
FAV  
Select the Favourite programme/all  
Programmes in turn.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)  
Button Function in 8 Days Guide Mode  
Programme Guide  
Remote Control Buttons Function  
1
BBC ONE  
DTV  
08:25 26 Mar  
09:00  
08:00  
26 Mar  
08:30  
RED  
Change EPG mode  
...  
Breakfast  
Don’  
...  
1
2
7
BBC ONE  
BBC TWO  
BBC THREE  
GREEN  
YELLOW  
BLUE  
Enter Date setting mode  
Enter Manual Record setting mode  
Enter Schedule list mode  
Display Popup window  
...  
...  
Chuck  
...  
To  
...  
...  
Cramp  
Number ja Nina a Lu  
This is BBC THREE  
Young Dracula  
BBC News  
...  
...  
70 CBBC Channel  
Dogstar  
Class TV: CI  
Breakfast  
BBC News  
80 BBC NEWS 24  
105 BBCi  
BBCi  
Select NOW or NEXT Programme  
Select the Broadcast Programme  
Page Up/Down  
F
D
G
E
or  
or  
TV/RADIO  
Radio  
Popup  
Record  
Information  
PR + or -  
GUIDE/EXIT  
TV/RADIO  
INFO i  
Mode  
Date  
Manual Record  
Schedule List  
Switch off EPG  
Select TV or RADIO Programme  
Detail information on or off.  
Select the Favourite programme/all  
Programmes in turn.  
FAV  
FF  
Move to the left every one and a half hours.  
Move to the right every one and a half hours.  
Turn to the left every six hours.  
Turn to the right every six hours.  
Select Record/delete the highlighted  
programme in turn.  
GG  
IFF  
GGI  
RECORD  
Icon  
Function  
Recording  
(Blue colour) Reminder  
(Red colour)  
Schedule Recording  
The contents below are only applicable when country selected is the UK.  
Programme Guide  
Remote Control Buttons Function  
1
BBC ONE  
DTV  
10:28 30 Mar  
RECORD  
Select Schedule Recording/Schedule  
10:30  
30 Mar  
...  
11:00  
11:30  
Recording Series/highlighted programmes in turn.  
1
BBC ONE  
...  
REC  
Car Booty  
To Buy or  
Escape t  
2
5
7
BBC TWO  
Five  
...  
...  
School  
Schools: Primary Geography  
Trisha Goddard  
Sc  
Icon  
Function  
Recording  
Record Single Episode  
Record Single Episode Conflict  
Record Series  
Five News  
BBC THREE  
This is BBC THREE  
...  
...  
15 abc1  
16 QVC  
Home Improvem  
Silver Day  
Closedown  
Home Improv  
(Red colour)  
8 Simple Rules  
Silver Day  
17 UKTV Gold  
TV/RADIO  
Radio  
Popup  
Record  
Manual Record  
Information  
Record Series Conflict  
Mode  
Date  
Schedule List  
(Blue colour) Reminder  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Function in Date Change Mode  
Programme Guide  
BBC ONE  
Remote Control Buttons Function  
1
08:25 26 Mar  
09:00  
GREEN  
Switch off Date setting mode  
Change to the selected date  
Select a date  
Switch off Date setting mode  
Switch off EPG  
Today  
08:00  
26 Mar  
08:30  
...  
Breakfast  
Don’  
1
2
7
BBC ONE  
BBC TWO  
BBC THREE  
...  
...  
Chuck  
...  
To  
...  
...  
...  
Cramp  
Number ja Nina a  
Lu  
F
E
G
or  
This is BBC THREE  
...  
Class TV:  
...  
CI  
70 CBBC Channel  
80 BBC NEWS 24  
Dogstar  
Young Dracula  
BBC News  
GUIDE/EXIT  
BBC News  
Breakfast  
105 BBCi  
BBCi  
Date Change  
Date Exit  
Button Function in Extended Description Box  
Information  
BBC ONE  
Remote Control Buttons Function  
1
10:31 30 Mar  
To Buy or Not to buy  
11:00  
Text Up/Down  
D
E
or  
11:30 30 Mar  
INFO i  
Detail information on or off.  
Switch off EPG  
Enter Manual Record setting mode.  
Enter schedule list mode.  
Presenters Sarah Walker and Simon Rimmer are looking for a house in  
Cheshire for a couple with a growing family. [S]  
GUIDE/EXIT  
YELLOW  
BLUE  
Record  
Info. Exit  
Manual Record  
Schedule List  
The contents below are only applicable when country selected is the UK.  
* Recommended : Recommended programmes which are related to selected programmes  
Information  
Remote Control Buttons Function  
261 EIT 1  
13:02 2 Apr  
With a recommended programme in place,  
the display shows a pop-up of record setting  
which helps you set up or delete a  
Recommended Timer Record Series/Record  
Single Episode.  
News Update  
13:05 ~ 13:07 2 Apr  
Latest breaking news stories from around the world.  
Recommended programme Up/Down.  
D
E
or  
Recommended programmes  
Weather DTV261 EIT 1  
Series  
Popup  
Record  
Info. Exit  
Manual Record  
Schedule List  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE)  
Record Popup  
* You can set up and activate the Record Series only when the country is set to the UK.  
* You cannot activate a reminder during power off mode.  
Programme Guide  
Remote Control Buttons Function  
1
BBC ONE  
10:45 30 Mar  
09:00  
EXIT/BACK  
Delete the pop-up.  
DTV  
10  
Cr  
To Buy or Not to Buy  
DTV1 BBC ONE  
Fri. 30 Mar 11:00~11:30  
Move the highlighted field.  
Follow the order of functions of the selected  
button.  
D
E
or  
...  
Don’  
1
2
7
BBC ONE  
BBC TWO  
BBC THREE  
...  
ina a  
...  
Lu  
Record series  
Record programme  
Set reminder  
70 CBBC Channel  
80 BBC NEWS 24  
105 BBCi  
...  
ass TV:  
...  
CI  
BBC News  
Cancel  
Popup Menu  
Record series  
Function  
Set up Record Series operation for  
selected programme.  
TV/RADIO  
Radio  
Popup  
Record  
Manual Record  
Information  
Mode  
Date  
Schedule List  
Record programme Set up Record Programme operation for  
selected programme.  
Watch this pro.  
Set reminder  
Move to selected channel.  
When the selected programme is not broadcasted,  
set up Schedule Recording operation.  
Delete Recording or Reminder mode.  
Delete series Recording mode  
Delete the pop-up.  
Delete this  
Delete series  
Cancel  
When the current channel being viewed is different from  
the scheduled recording channel, a message as shown  
below will appear on the screen 1 minute before the  
scheduled recording.  
When the next timer recording is scheduled to start before  
the end of a programme being recorder a message as shown  
below will appear on the screen one minute before the  
scheduled start time of the next recording (UK Only)  
Schedule Overlap  
A Recording is scheduled,  
the channel will change  
in 1 minute. Continue?  
Schedule recording will start in a few minutes.  
EVENT 7 3 Channel 3 Thu Oct 12 13:10~13:14  
Current schedule recording will stop to record this.  
REC  
EVENT 10 4 Channel 4 Thu Oct 12 13:07~13:12  
YES  
NO  
OK  
No  
Conflict pop-up  
* The contents below are only applicable when country selected is the UK.  
Schedule Overlap  
Remote Control Buttons Function  
EXIT  
Delete the pop-up.  
Move the highlighted field.  
The Weakest Link 2 BBC TWO Fri Mar 23 17:15~18:00  
To schedule this, some timer changes are needed.  
F
G
E
or  
Gina’s Laughing Gear 1 BBC ONE Fri Mar 23 17:00~17:30  
D
or  
List of conflicts.  
-> Gina’s Laughing Gear 70 CBBC Channel Sat Mar 24 18:30~18:58  
When you press the OK button it is possible  
to delete the conflicts or to switch the mode  
to rerun and set up the Record operation.  
When you press the NO button, you can  
delete the Recording pop-up.  
OK  
No  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
EXIT  
GUIDE  
OK  
TIME  
SHIFT  
TIME  
SHIFT  
PICTURE SIZE (ASPECT RATIO) CONTROL  
16:9 Original  
,
You can watch the screen in various picture formats;  
4:3 14:9 Zoom1/2  
,
MARK  
FAV  
,
and  
.
VOL  
PR  
If a fixed image is displayed on the screen for a long time, that fixed image  
may become imprinted on the screen and remain visible.  
MUTE  
1
4
2
3
6
You can adjust the enlarge proportion using D or E button.  
This function works in the following signal.  
5
8
0
7
9
LIST  
Q.VIEW  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
REVEAL  
I/II  
RATIO  
Press the  
button repeatedly to select the desired picture format.  
Aspect Ratio SCREEN  
1
You can also adjust  
in the  
menu.  
16:9  
Original  
The following selection will allow you to adjust the pic-  
ture horizontally, in linear proportion, to fill the entire  
screen(useful for viewing 4:3 formatted DVDs).  
When your TV receives a wide screen signal it will auto-  
matically change to the picture format broadcast.  
16:9  
Original  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
Zoom1  
4:3  
The following selection will allow you to view a picture  
with an original 4:3 aspect ration, grey bars will appear  
on both the left and right of the screen.  
The following selection will allow you to view  
the picture without any alteration, while filling  
the entire screen. However, the top and bot-  
tom of the picture will be cropped.  
4:3  
Zoom1  
DE  
14:9  
Zoom2  
You can view a picture format of 14:9 or a general TV  
programme in the 14:9 mode. The 14:9 screen is  
viewed in the same way as in 4:3, but is magnified to  
the left and right.  
Choose Zoom 2 when you wish the picture to  
be altered, both horizontally extended and  
vertically cropped. The picture adopting a  
compromise between alteration and screen  
coverage.  
14:9 DE  
Zoom2  
DE  
!
NOTE  
16:9  
16:9  
16:9  
4:3  
4:3  
You can only select  
You can only select  
You can only select  
(Wide),  
(Wide),  
(Wide),  
, Zoom 1/2 in Component, HDMI mode.  
, in RGB mode only.  
G
G
G
4:3 14:9  
,
, Zoom 1/2 in a delayed mode and  
during the playback of recordings of TV, AV1, AV2 and AV3 input.  
Aspect ratio control of the delayed mode and the playback is managed separately  
with the normal input mode.  
G
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRESET PICTURE SETTINGS  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Picture Mode-Preset  
TIME  
SHIFT  
TIME  
SHIFT  
Vivid  
Select this option to display a sharp image.  
Standard  
The most general and natural screen display sta-  
tus.  
MARK  
FAV  
Cinema  
Select this option to display a mild image.  
VOL  
PR  
User 1/2  
Select this option to use a user defined setting.  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
Press the MENU button and then D E button to  
or  
1
2
3
4
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
PICTURE  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
or  
Picture Mode  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
Vivid Standard Cinema User 1  
User 2  
.
,
,
,
, or  
1
Press the EXIT button to return to normal TV viewing.  
Picture Mode  
appearance. Select the preset value in the  
adjusts the TV for the best picture  
Picture Mode  
Colour Temperature  
G
Vivid  
Standard  
Cinema  
User 1  
User 2  
Picture  
Mode  
menu based on the programme category.  
Advanced  
Picture Reset  
Demo  
Vivid Standard  
Cinema  
are programmed for  
,
and  
optimum picture reproduction at the factory and cannot be  
changed.  
2 3  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
Auto Colour Tone Control (Warm/Medium/Cool)  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
To initialise values (reset to default settings), select the  
Cool option.  
TIME  
SHIFT  
TIME  
SHIFT  
Choose one of three automatic colour adjustments. Set to  
warm to enhance hotter colours such as red, or set to cool  
to see less intense colours with more blue.  
MARK  
FAV  
VOL  
PR  
User1 or User2 in the  
This menu is activated after selecting  
Picture Mode.  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
1
Press the MENU button and then D E button to  
or  
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
PICTURE  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
or  
2
3
4
Colour Temperature  
.
Move MENU Prev.  
1
Press the G button and then D E button to select  
or  
Cool Medium Warm  
User  
.
either  
,
,
, or  
Picture Mode  
Colour Temperature  
G
Cool  
Press the EXIT button to return to normal TV viewing.  
Medium  
Warm  
User  
Advanced  
Picture Reset  
Demo  
2 3  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MANUAL PICTURE ADJUSTMENT  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Picture Mode-User option  
TIME  
SHIFT  
TIME  
SHIFT  
Contrast  
Adjusts the difference between light and dark  
levels in the picture.  
Brightness  
Increases or decreases the amount of white in  
the picture.  
MARK  
FAV  
VOL  
PR  
Colour  
Adjusts intensity of all colours.  
Sharpness  
Adjusts the level of crispness in the edges  
between the light and dark areas of the picture.  
The lower the level, the softer the image.  
SETUP  
O
Tint  
Adjusts the balance between red and green lev-  
els.  
Picture Mode  
Colour Temperature  
PICTURE G  
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
TIME  
OPTION  
SCREEN  
D V R  
MENU  
Press the  
the  
button and then D E button to select  
or  
1
2
3
PICTURE menu.  
Move MENU Prev.  
1
Press the G button and then D E button to select  
or  
Picture Mode.  
Picture Mode  
G
Vivid  
Colour Temperature  
Standard  
Cinema  
User 1  
User 2  
Advanced  
Picture Reset  
Demo  
Press the G button and then D  
E button to select  
User  
or  
1 or User 2.  
Press the G button and then D E button to select the  
or  
4
Contrast, Brightness, Colour,  
desired picture option (  
Sharpness Tint  
2 3  
and  
).  
User 1  
Press the F G button to make appropriate adjustments.  
or  
5
6
Contrast  
Brightness  
Colour  
Sharpness  
Tint  
100  
G
45  
50  
50  
0
R
G
EXIT  
Press the  
button to return to normal TV viewing.  
!
NOTE  
4 5  
You cannot adjust colour, sharpness and tint in the RGB-  
PC mode.  
G
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Colour Tone - User option  
TIME  
SHIFT  
TIME  
SHIFT  
To adjust red, green, blue to any colour temperature you prefer.  
MARK  
FAV  
VOL  
PR  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
TIME  
MENU  
PICTURE menu.  
Press the  
the  
button and then D E button to select  
or  
1
2
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
Colour Temperature.  
or  
Move MENU Prev.  
1
User.  
Press the G button and then D E button to select  
or  
3
4
Picture Mode  
Colour Temperature  
G
Cool  
Medium  
Warm  
User  
Advanced  
Picture Reset  
Demo  
Red  
Press the G button and then D E button to select  
or  
,
Green  
Blue  
.
or  
5
6
Press the F G button to make appropriate adjustments.  
or  
2 3  
EXIT  
Press the  
button to return to normal TV viewing.  
User  
Red  
40  
G
Green  
Blue  
0
0
4 5  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XD - PICTURE IMPROVEMENT TECHNOLOGY  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
XD is LG electronic's unique picture improving technology to  
display a real HD source through an advanced digital signal pro-  
cessing algorithm.  
TIME  
SHIFT  
TIME  
SHIFT  
It is not possible to use this function in RGB-PC mode.  
MARK  
FAV  
VOL  
PR  
Press the MENU button and then D E button to select  
or  
1
PICTURE  
the  
menu.  
SETUP  
O
Picture Mode  
Colour Temperature  
XD  
Press the G button and then D E button to select  
or  
.
2
3
PICTURE G  
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
TIME  
Press the G button and then D E button to select  
or  
OPTION  
SCREEN  
D V R  
Auto or Manual.  
EXIT  
Press the  
button to return to normal TV viewing.  
4
Move MENU Prev.  
1
* Manual Selection  
User1  
User2 Picture  
or of  
This menu is activated after selecting the  
Picture Mode  
Auto  
Colour Temperature  
Mode  
.
Manual  
G
XD Contrast  
On  
Advanced  
Picture Reset  
Demo  
Press the G button and then D or E button to select XD  
Contrast, XD Colour, XD NR or MPEG NR.  
1
XD Colour  
On  
XD NR  
Low  
MPEG NR  
0
Press the G button and then D or E button to select On  
2
3
Off  
or  
.
2
EXIT  
Press the  
button to return to normal TV viewing.  
Picture Mode  
Auto  
Colour Temperature  
Manual  
G
A XD Contrast : Optimises the contrast automatically  
according to the brightness of the reflection.  
XD Contrast  
Advanced  
Picture Reset  
Demo  
On  
On  
XD Colour  
XD NR  
A XD Colour : Adjusts the colour of the reflection auto-  
matically to reproduce as close as possible natural  
colours.  
Low  
MPEG NR  
0
A XD NR : Removes interference up to the point where it  
does not damage the original picture.  
3
A MPEG NR : Reduces interference which may appear on  
the screen while watching TV.  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
DEMO  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Use it to see the difference between XD Demo on and XD  
Demo off.  
TIME  
SHIFT  
TIME  
SHIFT  
It is not possible to use this function in RGB[PC],HDMI[PC]  
mode.  
MARK  
FAV  
VOL  
PR  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
Press the MENU button and then D E button to select  
or  
1
2
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
PICTURE menu.  
the  
TIME  
OPTION  
SCREEN  
D V R  
Press the MENU button and then D E button to select  
XD Demo.  
or  
Move MENU Prev.  
1
XD Demo  
Press the G button to begin  
.
3
4
Picture Mode  
Colour Temperature  
XD Demo  
MENU EXIT  
or button.  
To stop  
, press the  
Advanced  
Picture Reset  
Demo  
G
To Start  
2 3  
XD Demo  
XD Off  
XD On  
Menu Exit  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADVANCED - CINEMA  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
To set the TV up for the best picture quality for viewing  
films.  
TIME  
SHIFT  
TIME  
SHIFT  
This feature operates only in TV, AV, S-Video and  
Component 480i/576i mode.  
MARK  
FAV  
VOL  
PR  
It is not possible to use this function while playing a  
recorded programme.  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
AUDIO  
O
O
O
O
O
MENU  
Press the  
button and then D  
button to select  
1
E
or  
Advanced  
Picture Reset  
Demo  
TIME  
the PICTURE menu.  
OPTION  
SCREEN  
D V R  
Advanced  
Press the G button and then D Ebutton to select  
or  
.
2
3
4
Move MENU Prev.  
1
Press the G button and then D Ebutton to select Cinema.  
or  
Picture Mode  
Colour Temperature  
Advanced  
Picture Reset  
Demo  
G
Cinema  
Off  
Black Level  
Low  
Press the G button and then F Gbutton to select On or Off.  
or  
EXIT  
Press the  
button to return to normal TV viewing.  
5
2
Picture Mode  
Colour Temperature  
Advanced  
Picture Reset  
Demo  
Cinema  
FG  
On  
Black Level  
Low  
3
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
ADVANCED - BLACK(DARKNESS) LEVEL  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
When you view a film this function adjusts the TV to best picture  
quality. Adjusting the contrast and the brightness of the screen  
using the black level of the screen.  
TIME  
SHIFT  
TIME  
SHIFT  
This function works in the following mode: AV (NTSC-M), S-  
Video (NTSC-M) or HDMI.  
MARK  
FAV  
VOL  
PR  
It is not possible to use this function while playing a recorded  
programme  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
MENU  
PICTURE menu.  
Press the  
the  
button and then D E button to select  
or  
AUDIO  
O
O
O
O
O
1
2
3
Advanced  
Picture Reset  
Demo  
TIME  
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
Advanced.  
or  
Move MENU Prev.  
1
Black  
Low  
Press the G button and then D E button to select  
or  
Level.  
Picture Mode  
Colour Temperature  
Advanced  
Picture Reset  
Demo  
G
Cinema  
Off  
Press the G button and then F G button to select  
or  
4
Black Level  
Low  
or High.  
A Low : The black level of the screen gets darker.  
A High : The black level of the screen gets brighter.  
2
EXIT  
Press the  
button to return to normal TV viewing.  
5
Picture Mode  
Colour Temperature  
Advanced  
Picture Reset  
Demo  
Cinema  
Off  
Black Level  
FG  
Low  
3 4  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE RESET  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Returns to the default factory setting for Picture Mode, Colour,  
Temperature, XD and Advanced.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
O
Picture Mode  
Colour Temperature  
PICTURE G  
MENU  
PICTURE menu.  
Press the  
the  
button and then D E button to select  
or  
1
2
3
AUDIO  
O
O
O
O
O
Advanced  
Picture Reset  
Demo  
TIME  
OPTION  
SCREEN  
D V R  
Press the G button and then D E button to select  
or  
Picture Reset  
.
Move MENU Prev.  
1
Press the G button to initialise the adjusted value.  
Picture Mode  
Colour Temperature  
Advanced  
Picture Reset  
Demo  
G
To Set  
2 3  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE CONTROL  
IMAGE STICKING MINIMIZATION (ISM)  
METHOD  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
A frozen or still picture from a PC/Video game displayed on  
the screen for prolonged periods will result in a ghost image  
remaining even when you change the image. Avoid allowing a  
fixed image to remain on the screen for prolonged periods.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
White wash  
White wash removes permanent images from the screen.  
Note: An excessive permanent image may be impossible to  
clear entirely with White Wash.  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Orbiter  
OPTION G  
Orbiter may help prevent ghost images. However, it is best  
not to allow any fixed image to remain on the screen. To  
avoid a permanent image on the screen, the screen will  
move every 2 minutes.  
SCREEN  
D V R  
O
O
Factory Mode  
Move MENU Prev.  
1
Inversion  
This function inverts the panel colour of the screen. The  
panel colour is automatically inverted every 30 minutes.  
Set ID  
1
Language  
Country  
Lock System  
Parental Control  
Input Label  
Factory Reset  
OK  
ISM Method  
Normal  
SIMPLINK  
Factory Mode  
G
Low Power  
Off  
Press the MENU button and then D E button to  
or  
1
2
3
2
OPTION  
select the  
menu.  
Press the G button and then D E button to select  
or  
Factory Mode  
Set ID  
.
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
1
Factory Reset  
OK  
Press the G button and then D E button to select  
or  
ISM Method  
.
ISM Method  
FG Normal  
Low Power  
Off  
Factory Mode  
Press the G button and then D  
E button to select  
or  
4
5
Normal Orbiter White wash Inversion  
either  
,
,
or  
.
Normal  
If you do not need this function, set  
.
3 4  
Press the EXIT button to return to normal TV viewing.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LOW-POWER PICTURE MODE  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function allows you to reduce the power consumption of  
the TV.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
5
OPTION  
select the  
menu.  
OPTION G  
SCREEN  
O
O
Factory Mode  
Press the G button and then D E button to select  
or  
D V R  
Factory Mode  
.
Move MENU Prev.  
Press the G button and then D E button to select  
or  
Low power  
.
1
Press the G button and then F G button to select  
or  
Off On  
or  
.
Set ID  
Language  
Country  
1
Press the EXIT button to return to normal TV viewing.  
Lock System  
Parental Control  
Input Label  
Factory Reset  
OK  
ISM Method  
Normal  
Low Power  
Off  
SIMPLINK  
Factory Mode  
G
2
Set ID  
1
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Factory Reset  
OK  
ISM Method  
Normal  
Factory Mode  
Low Power  
FG  
On  
3 4  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
AUTO VOLUME LEVELER  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
AVL automatically remains on the same level of volume if  
you change programmes.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
Press the MENU button and then  
button to  
D
E
1
2
3
4
or  
0
AUDIO G  
AUDIO  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Press the G button and then D E button to select  
or  
Auto Volume  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
Off On  
or  
.
1
Press the EXIT button to return to normal TV viewing.  
Sound Mode  
Auto Volume  
Balance  
G
Off  
On  
0
TV Speaker  
Digital Audio Out  
2 3  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRESET SOUND SETTINGS-SOUND MODE  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
You can select your preferred sound setting; Surround MAX,  
Standard, Music, Cinema or Sport and you can also adjust the  
frequency of the equalizer.  
TIME  
SHIFT  
TIME  
SHIFT  
Sound Mode lets you enjoy the best sound without any Special  
adjustment as the TV sets the appropriate sound options based  
on the programme content.  
MARK  
FAV  
VOL  
PR  
Surround MAX, Standard, Music, Cinema  
Sport  
are  
and  
preset for optimum sound quality at the factory and are not  
adjustable.  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
0
AUDIO G  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Surround MAX  
Select this option for the most realistic sound.  
Standard  
Music  
Commanding and natural audio.  
Select this option to enjoy the original sound when  
listening to music.  
Move MENU Prev.  
Cinema  
Sport  
User  
Select this option to enjoy sublime sound.  
Select this option to watch sports broadcasting.  
Select this option for user-defined audio settings.  
1
Sound Mode  
Auto Volume  
Balance  
G
Surround MAX  
Standard  
Music  
0
TV Speaker  
Digital Audio Out  
Cinema  
Sport  
User  
MENU  
Press the  
the  
button and then D or E button to select  
1
2
AUDIO  
menu.  
2 3  
Press the G button and then D or E button to select  
Sound Mode  
.
Press the G button and then D or E button to select  
Surround MAX, Standard, Music, Cinema, Sport or  
User.  
3
4
EXIT  
Press the  
button to return to normal TV viewing.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
SOUND SETTING ADJUSTMENT -USER MODE  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Adjusting the audio equalizer.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
MENU  
Press the  
the  
button and then D or E button to select  
0
AUDIO G  
1
2
AUDIO  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Press the G button and then D or E button to select  
Sound Mode.  
Move MENU Prev.  
1
3
4
5
Press the G button and then D or  
button to select User.  
E
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
G
Surround MAX  
Standard  
Music  
Cinema  
Sport  
0
Press the G button.  
User  
Select a frequency band by pressing the F or G button.  
Set the desired sound level with the D or E button.  
2 3  
EXIT  
Press the  
button to return to normal TV viewing.  
6
User  
120Hz  
200Hz  
500Hz  
1.2KHz  
3KHz  
F
G
7.5KHz  
12KHz  
4 5  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BALANCE  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
You can adjust the sound balance of the speakers to preferred  
levels.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
0
AUDIO G  
AUDIO  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Press the G button and then D E button to select  
or  
Balance  
.
Press the G button and then F  
desired adjustment.  
G button to make  
or  
Move MENU Prev.  
1
Press the EXIT button to return to normal TV viewing.  
Sound Mode  
Auto Volume  
Balance  
0 G  
L
R
TV Speaker  
Digital Audio Out  
2 3  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
TV SPEAKERS ON/ OFF SETUP  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
You can adjust the internal speaker status.  
TIME  
SHIFT  
TIME  
SHIFT  
AV1, AV2, AV3, COMPONENT, RGB  
HDMI  
In  
and  
HDMI DVI  
to  
even when there is no video signal.  
with  
cable, the TV speaker can be operational  
MARK  
FAV  
VOL  
PR  
If you wish to use an external hi-fi system, turn off the TV  
internal speakers.  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
0
AUDIO G  
AUDIO  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Press the G button and then D E button to select  
or  
TV Speaker  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
Off On  
or  
.
1
Press the EXIT button to return to normal TV viewing.  
Sound Mode  
Auto Volume  
Balance  
0
TV Speaker  
Digital Audio Out  
G
Off  
On  
2 3  
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SELECTING DIGITAL AUDIO OUT  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
This function allows you to select your preferred Digital Audio  
Output.  
TIME  
SHIFT  
TIME  
SHIFT  
The TV can only output Dolby Digital if a channel is broadcast  
with Dolby Digital Audio.  
When Dolby digital is available, selecting Dolby Digital in the  
Digital Audio Out menu will set SPDIF output to Dolby Digital.  
If Dolby Digital is selected in the digital audio out menu  
when dolby digital is not available, SPDIF output will be  
PCM.  
MARK  
FAV  
VOL  
PR  
Even if both Dolby Digital and Audio language have been set  
in a channel which broadcast Dolby Digital Audio, only Dolby  
Digital will be played.  
This function is not displayed in the Analogue mode.  
Manufactured under license from Dolby  
Laboratories. “Dolby “and the double-D sym-  
bol are trademarks of Dolby Laboratories.  
SETUP  
O
O
Sound Mode  
Auto Volume  
Balance  
TV Speaker  
Digital Audio Out  
PICTURE  
Press the MENU button and then D E button to  
or  
1
2
3
4
0
AUDIO G  
AUDIO  
select the  
menu.  
TIME  
OPTION  
SCREEN  
D V R  
O
O
O
O
Press the G button and then D E button to select  
or  
Digital Audio Out  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
Dolby Digital PCM  
or  
.
1
Press the EXIT button to return to normal TV viewing.  
Sound Mode  
Auto Volume  
Balance  
0
TV Speaker  
Digital Audio Out  
G
Dolby Digital  
PCM  
2 3  
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
I/II  
Stereo/Dual Reception (In Analogue Mode Only)  
When a programme is selected, the sound information for the station appears after  
the programme number and station name disappear.  
Broadcast  
Mono  
On Screen Display  
MONO  
Stereo  
Dual  
STEREO  
DUAL I  
A Mono sound selection  
If the stereo signal is weak in stereo reception, you can switch to mono by pressing  
I/II  
back to stereo, press the I/I I button twice.  
the  
button twice. In mono reception, the clarity of sound is improved. To switch  
A Language selection for dual language broadcast  
If a programme can be received in two languages (dual language), you can switch to  
DUAL I DUAL II  
DUAL I+II  
I/II  
by pressing the button repeatedly.  
,
or  
DUAL I  
DUAL II  
Sends the primary broadcast language to the loudspeakers.  
Sends the secondary broadcast language to the loudspeakers.  
DUAL I+II Sends a separate language to each loudspeaker.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NICAM Reception (In Analogue Mode Only)  
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near  
Instantaneous Companding Audio Multiplex) digital sound can be received.  
Sound output can be selected according to the type of broadcast received by pressing the I/II  
button repeatedly.  
1
2
NICAM mono  
NICAM MONO FM MONO  
or .  
When  
When  
is received, you can select  
NICAM  
NICAM STEREO FM MONO  
or  
stereo is received, you can select  
.
FM mono  
If the stereo signal is weak, switch to  
.
3
NICAM DUAL I NICAM DUAL II  
When NICAM dual is received, you can select  
,
or  
NICAM DUAL I+II MONO  
or  
.
Speaker Sound Output Selection  
In AV, S-Video, Component, RGB and HDMI mode, you can select output sound for the left and  
right loudspeakers.  
I/II  
Repeatedly press the  
button to select the sound output.  
L+R: Audio signal from audio L input is sent to the left loud speaker and audio signal from audio  
R input is sent to the right loud speaker.  
L+L: Audio signal from audio L input is sent to left and right loud speakers.  
R+R:  
Audio signal from audio R input is sent to left and right loud speakers.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOUND & LANGUAGE CONTROL  
INPUT  
D/A  
MODE  
TV  
POWER  
BRIGHT  
ON-SCREEN MENU LANGUAGE /  
COUNTRY SELECTION  
TV/RADIO  
INPUT  
DVD  
VCR  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
The installation guide menu appears on the TV screen when it  
is switched on for the first time.  
OK  
Press the or E or F or G button and then,  
button to select your desired language.  
D
1
2
BACK  
MENU  
DVR  
EXIT  
GUIDE  
OK  
Press the or E button and then,  
button to  
D
OK  
TIME  
SHIFT  
TIME  
SHIFT  
select your country.  
MARK  
FAV  
* If you want to change Language/ Country selection  
VOL  
PR  
Press the MENU button and then use or E button  
to select the OPTION menu.  
1
D
MUTE  
1
4
2
3
6
5
8
0
Press the G button and then use D or E button to  
select Language. The menus can be shown on the  
screen in the selected language.  
2
7
9
LIST  
Q.VIEW  
Or, Press the G button and then use D or E button  
to select Country.  
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
REVEAL  
I/II  
Press the G button and then use F or Gbutton to  
select your desired language or country.  
3
OK  
Press the  
button.  
4
5
Press the EXIT button to return to normal TV viewing.  
!
NOTE  
Installation Guide  
EXIT  
or if you time out on the OSD (On  
If you do not finish the set-up  
by pressing  
G
Screen Display) the installation menu will continuously appear until the set up is completed whenever the  
TV is switched on  
If you select the wrong local country, teletext may not appear correctly on the screen and some problems  
may occur during teletext operation.  
G
The CI (Common Interface) function may not be applied based on country broadcasting circumstances.  
DTV mode control buttons may not function based on country broadcasting circumstances.  
In country that Digital broadcasting regulation isn’t fixed, some DTV function may not work depending  
on digital broadcasting circumstances.  
G
G
G
G The Country Setting "UK" should only be activated in UK.  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
LANGUAGE SELECTION  
(IN DIGITAL MODE ONLY)  
TIME  
SHIFT  
TIME  
SHIFT  
If audio  
function allows selection of a preferred language.  
Audio  
The  
data in a selected language is not broadcast, the default language  
audio will be played.  
MARK  
FAV  
VOL  
PR  
Use the  
function when two or more subtitle languages are  
Subtitle  
MUTE  
broadcast. If subtitle data in a selected language is not broadcast, the  
default language subtitle will be displayed.  
1
4
2
3
6
5
UPDATE  
SLEEP  
SUBTITLE  
INDEX  
HOLD  
RATIO  
TIME  
?
Press the MENU button and then use or  
button to select  
D
E
1
2
3
REVEAL  
I/II  
OPTION  
the  
menu.  
Press the G button and then use or button to select  
D
E
.
Language  
Press the G button and then use or button to select  
D
E
,
or .  
Audio Subtitle Subtitle Hard of hearing  
Press the G button and then use or button to select  
F
G
4
5
your desired language.  
Press the EXIT button to return to normal TV viewing.  
!
< Audio Language Selection >  
NOTE  
Audio Language OSD Information  
Display Status  
N.A Not Available  
When two or more audio languages are broadcast, you can  
G
select the audio language with the I/II button on the  
remote control.  
MPEG Audio  
Press the D E button to select an audio language.  
Dolby Digital Audio  
G
or  
Audio for “Visual Impaired”  
Audio for “Hearing Impaired”  
Press the F G button to select L+R, L+L or R+R.  
G
or  
< Subtitle Language Selection >  
Subtitle Language OSD Information  
Display Status  
Not Available  
When two or more subtitle languages are broadcast, you  
G
can select the subtitle language with the SUBTITLE button  
on the remote control.  
N.A  
TEXT  
Teletext Subtitle  
Press the D E button to select a subtitle language.  
Subtitle for “Hard of Hearing”  
G
or  
- The audio/subtitles can be displayed in a simpler form with 1 to 3 characters broadcast by the service provider.  
- When you select supplementary Audio (Audio for “Visual/Hearing Impaired”) the TV may output a part of the Main audio.  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
CLOCK SETUP  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
The clock is set automatically when receiving a digital signal.  
(You can set the clock manually only if the TV has no DTV signal.)  
You must set the time correctly before using on/off timer  
function.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
O
O
O
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
TIME  
select the  
menu.  
TIME G  
OPTION  
SCREEN  
D V R  
O
O
O
Press the G button and then D E button to select  
or  
Clock  
.
Press the G button and then F G button to select  
or  
either the year, date, or time option.  
Move MENU Prev.  
1
Once selected, use the D E button to set the year,  
or  
date, and time options.  
20  
12  
14  
Apr  
2007  
Clock  
G
Time  
Date  
Year  
Off Time  
On Time  
Auto Sleep  
Time Zone  
Press the EXIT button to return to normal TV viewing.  
4
2 3  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUTO ON/OFF TIMER SETTING  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
The Off time function automatically switches the TV to standby  
at a preset time.  
Two hours after the TV is switched on by the On time function it  
will automatically switch back to standby mode unless a button  
has been pressed.  
TIME  
SHIFT  
TIME  
SHIFT  
Once the on time/off time is set, these functions operate daily  
at the preset time.  
The Off time function overrides the On timer function if both  
are set to the same time.  
MARK  
FAV  
VOL  
PR  
The TV must be in standby mode for the On time function to  
work.  
SETUP  
PICTURE  
AUDIO  
O
O
O
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
TIME  
select the  
menu.  
TIME G  
OPTION  
SCREEN  
D V R  
O
O
O
Press the G button and then D E button to select  
or  
Off Time/On Time  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
On  
.
1
On/Off Time  
Off  
.
To cancel  
function, select  
Press the G button and then D E button to set the  
or  
hour.  
Clock  
4
5
6
Off Time  
On Time  
Auto Sleep  
Time Zone  
G
Off  
On  
18  
00  
3
:
Press the G button and then D E button to set the  
or  
minutes.  
Volume  
Mode  
PR  
TV  
0
For On Time function only  
Programme:  
ton to select  
And then, Press the Gbutton and then D Ebutton to  
or  
Press the Gbutton and then D Ebut-  
or  
2 3 4 5 6  
TV DTV  
Radio  
Mode  
in the menu.  
,
or  
select the programme.  
Volume:  
Press the G button and then D or E but-  
ton to adjust volume level at switch-on.  
Press the EXIT button to return to normal TV viewing.  
7
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIME SETTING  
AUTO SHUT-OFF SETTING  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
If the TV is switched on and there is no input signal, it will  
switch off automatically after 10 minutes.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
O
O
O
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
TIME  
select the  
menu.  
TIME G  
OPTION  
SCREEN  
D V R  
O
O
O
Press the G button and then D E button to select  
or  
Auto Sleep  
.
Press the G button and then D E button to select  
or  
Move MENU Prev.  
Off On  
or  
.
1
Press the EXIT button to return to normal TV viewing.  
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
G
Off  
On  
2 3  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
TIME ZONE SETUP  
When you select a Time Zone city, the TV time is set by the  
time offset information based on Time Zone and GMT  
(Greenwich Mean Time) which is received with the broadcast  
signal and the time is set automatically by a digital signal.  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
UPDATE  
INDEX  
HOLD  
RATIO  
TIME  
?
Press the MENU button and then  
button to  
D
E
or  
1
2
3
4
SLEEP  
SUBTITLE  
REVEAL  
TIME  
select the  
menu.  
I/II  
Press the G button and then D E button to select  
or  
Time Zone  
.
SETUP  
PICTURE  
AUDIO  
O
O
O
Clock  
Off Time  
On Time  
Auto Sleep  
Time Zone  
Press the G button and then F or G button to select  
your viewing area time zone.  
TIME G  
OPTION  
SCREEN  
D V R  
O
O
O
Press the EXIT button to return to normal TV viewing.  
Move MENU Prev.  
1
Clock  
SLEEP TIMER SETTING  
Off Time  
On Time  
Auto Sleep  
Time Zone  
You do not have to remember to switch the TV off before you  
go to sleep.  
G
Time Zone  
London GMT  
The sleep timer automatically switches the TV to standby  
after the preset time has elapsed.  
2 3  
a
Press the SLEEP button repeatedly to select the num-  
ber of minutes.  
The display ‘  
followed by  
’ will appear on the screen,  
- - - Min  
10 20 30 60 90 120 180  
and  
,
,
,
,
,
,
240  
.
When the number of minutes required is displayed on  
the screen, the timer begins to count down from the  
number of minutes selected.  
b
c
d
e
To view the remaining sleep time, press the SLEEP but-  
ton once.  
To cancel the sleep time, repeatedly press the SLEEP  
button until the display ‘  
’ appears.  
- - - Min  
When you switch the TV off, the preset sleep time is  
cancelled.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL CONTROL / RATINGS  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
SET PASSWORD & LOCK SYSTEM  
TIME  
SHIFT  
TIME  
SHIFT  
Enter the password, press ‘0, ‘0, ‘0, ‘0’ on the remote control  
handset.  
MARK  
FAV  
VOL  
PR  
MUTE  
1
4
2
3
6
5
8
0
7
9
LIST  
Q.VIEW  
SETUP  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
PICTURE  
AUDIO  
TIME  
Press the MENU button and then  
button to  
D
E
or  
1
2
3
OPTION  
select the  
menu.  
OPTION G  
SCREEN  
D V R  
O
O
Factory Mode  
Press the G button and then D E button to select  
or  
Lock System  
.
Press the G button and then F G button to select  
or  
Move MENU Prev.  
On  
.
1
To set the password  
Press the Gbutton and then use the NUMBER buttons  
to input a 4-digit password.  
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Off  
Lock  
G
Set Password  
New  
Be sure to remember this number!  
Re-enter new password for confirm.  
Factory Mode  
Confirm  
If you forget your password, press ‘7, ‘7, ‘7, ‘7’ on the  
remote control handset.  
2 3  
Press the EXIT button to return to normal TV viewing.  
4
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
BACK  
MENU  
INPUT  
D/A  
MODE  
TV  
DVR  
OK  
POWER  
BRIGHT  
EXIT  
GUIDE  
TV/RADIO  
INPUT  
DVD  
VCR  
PARENTAL CONTROL  
This function operates according to information from the  
TIME  
SHIFT  
TIME  
SHIFT  
broadcasting station.  
INFO  
i
SIMPLINK  
TEXT  
LIVE TV  
Therefore if the signal has incorrect information, this  
function does not operate.  
This allows you to set up blocking schemes to block spe-  
cific channels and ratings.  
MARK  
FAV  
VOL  
PR  
A password is required to gain access to this menu.  
This TV is programmed to remember which option it was  
last set to even if you switch the TV off.  
MUTE  
1
4
2
3
6
Recording and TimeShift Mode can be accessed even  
when locked or rated.  
When a programme is locked or rated with delayed state,  
the message “locked program” is displayed without dis-  
playing the password window.  
When recording a locked or rated programme, the  
recorded programme will be locked unless you enter the  
password before the recording is finished. If you wish to  
play the locked programme, you should enter the pass-  
word.  
5
8
0
7
9
LIST  
Q.VIEW  
SETUP  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
PICTURE  
AUDIO  
TIME  
OPTION G  
SCREEN  
O
O
Factory Mode  
D V R  
Move MENU Prev.  
1
Press the MENU button and then D E button to  
or  
1
2
Language  
Country  
Lock System  
Parental Control  
Input Label  
OPTION  
select the  
menu.  
Press the G button and then D E button to select  
or  
G
Parental Guidance  
Off  
Parental Control  
.
SIMPLINK  
Factory Mode  
Key Lock  
Off  
Then, press the G button to enter the password as  
requested.  
The TV is set up with the initial password “0-0-0-0.  
Press the G button and then F G button to select  
or  
3
Parental Guidance Key Lock  
or  
.
2 3 4  
Parental Guidance  
(In Digital mode only)  
Prevents children from watching certain adult’s TV pro-  
grammes, according to the ratings limit set.  
Key Lock  
The TV can be set so that the remote control is  
required to control it. This feature can be used to  
prevent unauthorised viewing.  
In Key Lock ‘  
On, if the TV is turned off, press  
the r / I, INPUT, PR D E button on the TV  
or  
D/A  
or POWER, INPUT,  
, PR + or - or NUMBER  
buttons on the remote control.  
Press the D E button to make appropriate adjust-  
or  
ments.  
Key Lock On  
With the  
, the display  
4
5
Key Lock On appears on the screen if  
any button on the front panel is pressed  
while viewing the TV.  
EXIT  
Press the  
button to return to normal TV viewing.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TELETEXT  
This feature is not available in all countries.  
Teletext is a free service broadcast by some TV stations which gives up-to-the-minute information on news,  
weather, television programmes, share prices and many other topics.  
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard tele-  
text) consists of a number of pages which are selected by directly entering the corresponding page number.  
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.  
SWITCH ON/OFF  
Press the TEXT button to switch to teletext. The initial page or last page viewed appears on the screen.  
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number  
indicates your selection, while the second shows the current page displayed.  
TEXT EXIT  
or  
Press the  
button to switch off teletext. The previous mode reappears.  
SIMPLE TEXT  
A
Page selection  
1
2
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you  
press a wrong number, you must complete the three digit number and then re-enter the correct page number.  
The PR+ or - button can be used to select the preceding or following page.  
TOP TEXT  
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field  
denotes the next group and the blue field indicates the next block.  
A
Block / group / page selection  
1
2
3
With the blue button you can progress from block to block.  
Use the yellow button to proceed to the next group with automatic overflow to the next block.  
With the green button you can proceed to the next existing page with automatic overflow to the next group.  
Alternatively the PR+ button can be used.  
4
The red button returns to the previous selection. Alternatively the PR- button can be used.  
A
Direct page selection  
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER  
buttons in TOP mode.  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FASTEXT  
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond-  
ing coloured button.  
A Page selection  
1
i
Press the  
button to select the index page.  
2
3
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.  
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER  
buttons in FASTEXT mode.  
4
The PR+ or - button can be used to select the preceding or following page.  
SPECIAL TELETEXT FUNCTIONS  
?
A REVEAL  
Press this button to display concealed information, such as solutions to riddles or puzzles.  
Press this button again to remove the information from the display.  
A UPDATE  
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left  
hand corner of the screen. When the updated page is available then display will change to the page number. Press  
this button again to view the updated teletext page.  
A TIME  
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.  
Press this button again to remove the display. In the teletext mode, press this button to select a sub page num-  
ber. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the  
RED/GREEN, PR+ or - or NUMBER buttons.  
Press again to exit this function.  
A HOLD  
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The num-  
ber of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button  
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change  
is inactive. To continue press this button again.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DIGITAL TELETEXT  
*This function works in UK only.  
The TV gives you access to digital teletext which is greatly improved in various aspects such as text, graphics etc.  
This digital teletext can access special digital teletext services and specific services which broadcast digital teletext.  
You should select off in the subtitle language menu to display teletext by pressing the SUBTITLE button.  
If the digital teletext service or the digital teletext only service is on, then Trick Play is not supported.  
The immediate recording feature is not supported in the digital teletext only service.  
Digital teletext service is not supported in the delayed mode.  
TELETEXT WITHIN DIGITAL SERVICE  
Press the numeric or PR + or - button to select a digital  
1
service which broadcasts digital teletext.  
To know which are digital teletext services, refer to the  
EPG service list.  
Follow the indications on digital teletext and move onto  
2
the next step by pressing TEXT, OK, D or  
,
or  
,
G
E F  
RED, GREEN, YELLOW, BLUE or NUMBER buttons etc.  
To change digital teletext service, select a different ser-  
vice by the numeric or PR + or - button.  
3
If pressing the MENU, GUIDE or INFO i button causes  
the teletext service disappear temporarily, press these  
buttons again to return to teletext.  
TELETEXT IN DIGITAL SERVICE  
Press the numeric or PR + or - button to select a certain  
service which broadcasts digital teletext.  
1
Press the TEXT or coloured button to switch on teletext.  
2
Follow the indications on digital teletext and move onto  
3
the next step by pressing OK,  
or  
,
or G, RED,  
D
E F  
GREEN, YELLOW, BLUE or NUMBER buttons and so on.  
Press the TEXT or colour button to switch off digital tele-  
text and return to TV viewing.  
4
Some services may allow you to access text services by  
pressing the RED button.  
If pressing the MENU, GUIDE or INFO i button causes  
the teletext service disappear temporarily. Press these  
buttons again to return to the teletext.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
TROUBLESHOOTING  
The TV does not operate properly  
A
Check to see if there is any object between the TV and the remote control causing an  
obstruction. Ensure you are pointing the remote control directly at the TV.  
Ensure that the batteries are installed with correct polarity (+ to +, - to -).  
Ensure that the correct remote operating mode is set: DVD, VCR etc.  
Install new batteries.  
The remote control does  
not work  
A
A
A
A
A
A
Is the sleep timer set?  
Power is suddenly  
turned off  
Check the power control settings. Has the Power supply been interrupted.  
Auto sleep  
Is  
activated on this station.  
The video function does not work.  
A
Check whether the TV is switched on.  
A
A
A
A
Try another channel. The problem may be with the broadcast.  
Is the power cord inserted correctly into the mains?  
Check your antenna direction and/or location.  
No picture & No sound  
Test the mains outlet by plugging another TV into the same outlet.  
Picture appears slowly  
after switching on  
A
This is normal, the image is muted during the TV startup process. Please contact  
your service centre, if the picture has not appeared after five minutes.  
A
A
A
A
A
Adjust Colour in menu option.  
Allow a sufficient distance between the TV and the VCR.  
Try another channel. The problem may be with the broadcast.  
Are the video cables installed properly?  
No or poor colour  
or poor picture  
Activate any function to restore the brightness of the picture.  
Horizontal/vertical bars  
or picture shaking  
A
Check for local interference such as an electrical appliance or power tool.  
A
A
A
Station or cable channel experiencing problems, tune to another station.  
Station signal is weak, reposition the antenna to receive weaker stations.  
Check for sources of possible interference.  
Poor reception on  
some channels  
Lines or streaks  
in pictures  
A
A
Check antenna (Change the position of the antenna).  
Check HDMI cable over version 1.2.  
No picture  
If the HDMI cables don’t support HDMI version 1.2, it can cause flickers or no  
screen display. In this case use the latest cables that support HDMI version 1.2.  
when connecting HDMI  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
The audio function does not work.  
A
A
A
A
+
-
Press the VOL or button.  
Sound muted? Press MUTE button.  
Picture OK & No sound  
Try another channel. The problem may be with the broadcast.  
Are the audio cables installed properly?  
No output from one  
of the speakers  
A
A
Balance  
Adjust  
in menu option.  
A change in ambient humidity or temperature may result in an unusual noise  
when the TV is switched on or off and does not indicate a fault with the TV.  
Unusual sound from  
inside the TV  
A
A
Check HDMI cable over version 1.2.  
Check USB cable over version 2.0.  
*This feature is not available for all models.  
No sound when  
connecting HDMI  
or USB  
The DVR function does not work.  
A
Format Hard Disk Drive.  
HDD Failure  
Note that all the contents recorded on the HDD will be erased.  
If this does not fix the problem, contact your nearest LG dealer.  
A
Check the Recording Space by pressing the DVR button.  
If there is no remaining space for recording, delete any unnecessary programmes  
on the Recorded TV List.  
Schedule Rec./Instant  
Rec. does not start.  
A
Check the number of programmes on the Recorded TV List.  
The Maximum number of recordings is 255 on the Recorded TV List.  
There is a problem in PC mode. (Only PC mode applied)  
A
Adjust resolution, horizontal frequency, or vertical frequency.  
The signal is out of range  
(Invalid format)  
A
A
Check the input source.  
Vertical bar or stripe on  
background &  
Horizontal Noise &  
Incorrect position  
Use Auto configure or adjust clock, phase, or H/V position. (Option)  
Screen colour is unstable  
or single colour  
A
A
Check the signal cable.  
Reinstall the PC video card.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAINTENANCE  
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.  
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.  
Cleaning the Screen  
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water  
and a little fabric softener or dish washing detergent. Wring the cloth until it is almost dry, and then use it  
1
to wipe the screen.  
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.  
2
Cleaning the Cabinet  
A
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.  
A
Do not to use a wet cloth.  
Extended Absence  
CAUTION  
G If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power  
cord to protect against possible damage from lightning or power surges.  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
PRODUCT SPECIFICATIONS  
50PG69  
**  
42PG69  
**  
MODELS  
50PG6900-ZC/ 50PG6900-ZF  
50PG6910-ZF  
42PG6900-ZC/ 42PG6900-ZF  
42PG6910-ZF  
1044.4 x 735.4 x 308.0 mm  
41.1 x 29.0 x 12.2 inches  
1235.6 x 849.3 x 364.1 mm  
48.7 x 33.5 x 14.4 inches  
Dimensions  
(Width x Height x Depth)  
with stand  
1044.4 x 680.6 x 79.6 mm  
41.1 x 26.8 x 3.2 inches  
1235.6 x 792.8 x 79.6 mm  
48.7 x 31.3 x 3.2 inches  
without stand  
with stand  
28 kg / 61.7 lbs  
25 kg / 55.1 lbs  
43.7 kg / 96.3 lbs  
39.7 kg / 87.5 lbs  
Weight  
without stand  
Power Requirement  
Power Consumption  
AC100-240V~ 50/60Hz  
AC100-240V~ 50/60Hz  
310W  
420W  
Television System  
PAL/SECAM B/G/D/K, PAL I/II, SECAM L/L’  
Programme Coverage  
VHF: E2 ~ E12, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47  
External Antenna Impedance  
75  
Operating Temperature  
0 ~ 40°C / 32 ~ 104°F  
Operating Humidity  
Less than 80%  
Environmental  
conditions  
Storage Temperature  
Storage Humidity  
-20 ~ 60°C / -4 ~ 140°F  
Less than 85%  
I
The specifications shown above may be changed without prior notice for quality improvement.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROGRAMMING THE REMOTE CONTROL  
The remote control is a multi brand or universal remote. It can be programmed. to operate most remote  
controlled devices from other manufacturers.  
Note that the remote control may not control all models from other brands.  
Programming a code into a remote mode  
1
Testing your remote control.  
To find out whether your remote control can operate other components without programming, turn on a  
DVD VCR  
or  
POWER PR + / -  
component such as a VCR and press the corresponding mode button (such as a  
) on the  
buttons to see if the  
remote control, while pointing at the component. Test the  
and  
component responds correctly. If the component does not operate correctly, the remote control requires  
programming to operate the device.  
DVD  
Switch on the component to be programmed, then press the corresponding mode button (such as  
or  
2
3
4
VCR  
) on the remote control. The remote control button of the desired device is illumintated.  
MENU  
MUTE  
buttons simultaneously, the remote control is ready to be programmed with  
Press the  
the code.  
and  
Enter a code number using the number buttons on the remote control.  
Programming code numbers for the corresponding component can be found on the following pages. If the  
code is correct, the device will turn off.  
MENU  
Press the  
button to store the code.  
5
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.  
PROGRAMMING CODE  
DVD  
Brand  
Codes  
Brand  
Codes  
Brand  
Codes  
APEX DIGITAL  
DENON  
G
022  
MITSUBISHI  
NAD  
002  
RCA  
005 006  
020 014  
023  
SAMSUNG011 015  
E
005 00O6NKYO  
008 017  
003 009  
013  
SONY  
007  
HARMAN KARDON  
027  
012  
PANASONIC  
PHILIPS  
THOMPSON  
TOSHIBA  
YAMAHA  
ZENITH  
005 006  
JVC  
019 008  
LG001 010 016 025  
PIONEER  
PROCEED  
PROSCAN  
004 026  
021  
009 018  
MAGNAVOX  
MARANTZ  
013  
024  
010 016 025  
005 006  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
VCR  
Brand  
Codes  
Brand  
Codes  
Brand  
Codes  
AIWA  
AKAI  
034  
MAGNAVOX  
031 033 034 041 SAMSUNG032 040 102  
104  
016 043 046 124  
125 146  
067 068  
012 031 033 067  
069  
105 107 109 112  
113 115 120 122  
125  
MARANTZ  
MARTA  
AMPRO  
ANAM  
072  
031 033 103  
101  
SANSUI  
SANYO  
022 043 048 135  
003 007 010 014  
102 134  
AUDIO DYNAMICS 012 023 039 043 MATSUI  
027 030  
031 033  
BROKSONIC  
CANON  
035 037 129  
028 031 033  
108  
MEI  
MEMOREX  
003 010 014 031 SCOTT  
033 034 053 072  
017 037 112 129  
131  
CAPEHART  
CRAIG003 040 135  
101 102 134 139  
045 046 059  
013 020  
SEARS  
003 008 009 010  
013 014 017 020  
031 042 073 081  
101  
CURTIS MATHES 031 033 041  
MGA  
DAEWOO  
005 007 010 064 MINOLTA  
0 6 5 10 8 110 111  
112 116 117 119  
108  
MITSUBISHI  
013 020 045 046  
049 051 059 061 SHARP  
031 054 149  
024  
DAYTRON  
DBX  
151  
SHINTOM  
012 023 039 043 MTC  
034 053 MULTITECH  
034 040  
SONY  
003 009 031 052  
056 057 058 076  
077 078 149  
034  
DYNATECH  
024 034  
ELECTROHOME 059  
NEC  
012 023 039 043  
048  
EMERSON  
006 017 025 027  
SOUNDESIGN  
STS  
029 031 034 035 NORDMENDE  
043  
013  
036 037 046 101  
129 131 138 153  
003 008 009 010  
034  
OPTONICA  
PANASONIC  
053 054  
SYLVANIA  
031 033 034 059  
067  
066 070 074 083  
133 140 145  
FISHER  
FUNAI  
GE  
SYMPHONIC  
TANDY  
034  
010 034  
031 033 063 072  
107 109 144 147  
132 136  
PENTAX  
013 020 031 033 TATUNG039 043  
063  
TEAC  
034 039 043  
031 033 070  
019 031 033 034  
101  
GO VIDEO  
PHILCO  
PHILIPS  
031 034 067  
TECHNICS  
HARMAN KARDON  
HITACHI  
012 045  
031 033 034 054 TEKNIKA  
067 071 101  
004 018 026 034  
043 063 137 150  
PILOT  
101  
THOMAS  
TMK  
034  
INSTANTREPLAY 031 033  
PIONEER  
PORTLAND  
013 021 048  
108  
006  
JCL  
031 033  
TOSHIBA  
008 013 042 047  
059 082 112 131  
040 101  
JCPENNY  
012 013 015 033 PULSAR  
072  
040 066 101  
043  
QUARTZ  
QUASAR  
011 014  
TOTEVISION  
UNITECH  
JENSEN  
JVC  
033 066 075 145  
040  
012 031 033 043 RCA  
048 050 055 060  
130 150 152  
013 020 033 034 VECTOR RESEARCH 012  
040 041 062 063 VICTOR 048  
VIDEO CONCEPTS 012 034 046  
107 109 140 144  
145 147  
KENWOOD  
014 034 039 043  
VIDEOSONIC  
WARDS  
040  
047 048  
REALISTIC  
003 008 010 014  
031 033 034 040  
053 054 101  
058  
003 013 017 024  
031 033 034 040  
053 054 131  
LG (GOLDSTAR) 001 012 013 020  
101 106 114 123  
LLOYD  
LXI  
034  
RICO  
YAMAHA  
ZENITH  
012 034 039 043  
034 048 056  
003 009 013 014  
RUNCO  
148  
017 034 101 106 SALORA  
040  
014  
058 072 080 101  
MAGIN  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IR CODES  
1. How to Connect  
A
Connect your wired remote control to the Remote Control port on the TV.  
2. Remote Control IR Codes  
A
Output waveform  
Single pulse, modulated with 37.917KHz signal at 455KHz  
Tc  
Carrier frequency  
FCAR = 1/Tc = fOSC/12  
T1  
Duty ratio = T1/Tc = 1/3  
A
Configuration of frame  
1st frame  
Lead code  
Low custom code  
High custom code  
Data code  
Data code  
C0 C1 C2 C3 C4 C5C6 C7 C0 C1 C2 C3 C4 C5C6 C7 D0 D1 D2 D3 D4 D5D6 D7 D0 D1 D2 D3 D4 D5D6 D7  
Repeat frame  
Lead code  
Repeat code  
Tf  
A
9 ms  
4.5 ms  
A
Repeat code  
0.55 ms  
9 ms  
2.25 ms  
A
Bit description  
Bit ”0”  
Bit ”1”  
0.56ms  
0.56ms  
1.12ms  
2.24ms  
A
Frame interval: Tf  
The waveform is transmitted as long as a key is depressed.  
Tf  
Tf  
Tf=108ms @455KHz  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Code (Hexa)  
Function  
Note  
00  
01  
02  
03  
40  
41  
06  
07  
08  
09  
10  
11  
PR +  
PR -  
VOL +  
VOL -  
Up (D)  
Down (E)  
Right (G)  
Left (F)  
POWER  
MUTE  
Number Key 0  
Number Key 1  
Number Key 2  
Number Key 3  
Number Key 4  
Number Key 5  
Number Key 6  
Number Key 7  
Number Key 8  
Number Key 9  
INPUT  
INFO i  
GUIDE  
SUBTITLE  
EXIT  
FAV  
Q.VIEW  
D/A  
TV/RADIO  
SIMPLINK  
BRIGHT +  
BRIGHT -  
I/II  
SLEEP  
MENU  
OK(  
LIST  
TEXT  
REVEAL  
TIME  
BACK  
UPDATE  
INDEX  
HOLD  
BLUE Key  
YELLOW Key  
GREEN Key  
RED Key  
RATIO  
G
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON (POWER ON/OFF)  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
R/C BUTTON  
12  
13  
14  
15  
16  
17  
18  
19  
0B  
AA  
AB  
56  
5B  
1E  
1A  
50  
F0  
7E  
E0  
E1  
0A  
0E  
43  
44  
53  
20  
2A  
26  
28  
62  
70  
65  
61  
63  
71  
72  
79  
B0  
BA  
B2  
B3  
8F  
8E  
B1  
BD  
7C  
9E  
)
II  
IFF  
GGI  
FF  
GG  
A
O
DVR  
LIVE TV  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL CONTROL DEVICE SETUP  
RS-232C Setup  
Connect the RS-232C (serial port) input jack to an  
external control device (such as a computer or an  
A/V control system) to control the TV’s functions  
externally.  
Connect the serial port of the control device to the  
RS-232C jack on the TV back panel.  
Note: RS-232C connection cables are not supplied  
with the TV.  
Type of Connector; D-Sub 9-Pin Male  
No.  
Pin Name  
1
2
3
4
5
6
7
8
9
No connection  
(
)
RXD Receive data  
1
6
5
9
(
)
TXD Transmit data  
(
)
DTR DTE side ready  
ND  
DSR DCE side ready  
G
(
)
(
)
RTS Ready to send  
(
)
CTS Clear to send  
No Connection  
RS-232C Configurations  
(
)
(
)
7-Wire Configurations Standard RS-232C cable  
3-Wire Configurations Not standard  
PC  
TV  
PC  
TV  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
2
3
5
4
6
7
8
3
2
5
6
4
8
7
TXD  
RXD  
GND  
DSR  
DTR  
CTS  
RTS  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
2
3
5
4
6
7
8
3
2
5
6
4
7
8
TXD  
RXD  
GND  
DTR  
DSR  
RTS  
CTS  
CTS  
CTS  
D-Sub 9  
D-Sub 9  
D-Sub 9  
D-Sub 9  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
Set ID  
BACK  
MENU  
DVR  
OK  
EXIT  
GUIDE  
Use this function to specify a set ID number.  
Refer to ‘Real Data Mapping. G p.112  
TIME  
SHIFT  
TIME  
SHIFT  
MARK  
FAV  
VOL  
PR  
SETUP  
PICTURE  
AUDIO  
TIME  
O
O
O
O
Language  
Country  
Lock System  
Parental Control  
Input Label  
SIMPLINK  
MENU  
Press the  
button and then use D or E button  
1
2
OPTION  
to select the  
menu.  
OPTION G  
SCREEN  
D V R  
O
O
Factory Mode  
Press the G button and then use D or E button to  
Factory Mode  
select  
.
Move MENU Prev.  
1
Press the G button and then use D or E button to  
Set ID  
3
4
select  
.
Set ID  
1
Language  
Country  
Lock System  
Parental Control  
Input Label  
Factory Reset  
OK  
Press the G button and then use F or G button to  
Set ID  
ISM Method  
Normal  
SIMPLINK  
Factory Mode  
G
adjust  
to choose the desired TV ID number.  
Low Power  
Off  
The adjustment range of SET ID is 1~99.  
EXIT  
Press  
button to return to normal TV viewing.  
5
2
Set ID  
Language  
Country  
FG  
1
Lock System  
Parental Control  
Input Label  
SIMPLINK  
Factory Reset  
OK  
ISM Method  
Factory Mode  
Normal  
Low Power  
Off  
3 4  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Communication Parameters  
A
A
A
(
)
A
A
A
Baud rate : 9600 bps UART  
Stop bit : 1 bit  
Data length : 8 bits  
Parity : None  
Communication code : ASCII code  
Use a crossed (null modem) cable.  
Command Reference List  
Transmission / Receiving Protocol  
Transmission  
COMMAND COMMAND  
DATA  
1
2
(Hexadecimal)  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
01. Power  
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
a
c
d
e
f
00 ~ 01  
Refer to p. 110  
00 ~ 01  
[Command 1] : First command to control the TV.  
(j, k, m or x)  
[Command 2] : Second command to control the TV.  
*
02. Aspect Ratio  
03. Screen Mute  
04. Volume Mute  
05. Volume Control  
06. Contrast  
*
*
[Set ID]  
: You can adjust the TV ID to choose  
desired monitor ID number in option  
menu.  
00 ~ 01  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 64  
00 ~ 01  
00 ~ 01  
00 ~ 64  
00 ~ 03  
00 ~ 50  
00 ~ 50  
00 ~ 50  
00 ~ 07  
g
h
i
Adjustment range is 1 ~ 99.  
When selecting Set ID ‘0, every connected  
TV is controlled.  
07. Brightness  
08. Colour  
09. Tint  
j
Set ID is indicated as decimal (1~99) on  
menu and as Hexa decimal (0x0~0x63)  
on transmission/receiving protocol.  
: To transmit command data.  
Transmit ‘FF’ data to read status of  
command.  
10. Sharpness  
k
l
11. OSD Select  
[DATA]  
*
12. Remote control lock mode  
13. Balance  
m
t
14. Colour Temperature  
15. Red Adjustment  
16. Green Adjustment  
17. Blue Adjustment  
18. Abnormal Status  
19. ISM Method  
u
v
w
$
z
[Cr]  
[ ]  
: Carriage Return  
ASCII code ‘0x0D’  
: ASCII code ‘space (0x20)’  
*
*
OK Acknowledgement  
[Command2][ ][Set ID][ ][OK][Data][x]  
p
q
r
Refer to p. 112  
00 ~ 01  
20. Low Power  
j
* The TV transmits ACK (acknowledgement) based on  
this format when receiving normal data. At this time, if  
the data is data read mode, it indicates present status  
data. If the data is data write mode, it returns the  
data of the PC computer.  
21. Orbiter Time Setting  
22. Orbiter Pixel Setting  
23. Auto Configure  
24. Channel Select Command  
25. Send IR Code  
26. Input select (Main)  
j
01 ~ FE  
00 ~ 03  
01  
j
s
j
u
a
c
b
m
m
x
Refer to p. 113  
Key Code  
Refer to p. 113  
Error Acknowledgement  
[Command2][ ][Set ID][ ][NG][Data][x]  
When setting the 18 ~ 26, a menu does not appear on  
*
screen.  
* The TV transmits ACK (acknowledgement) based on  
this format when receiving abnormal data from  
non-viable functions or communication errors.  
Data 01: Illegal Code  
02: not support function  
03: Wait more time  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
04. Volume Mute (Command 2 : e)  
01. Power (Command 2 : a)  
G To control Power On/Off of the TV.  
G To control volume mute on/off.  
You can also adjust mute using the MUTE button on  
remote control.  
Transmission  
[k][a][ ][Set ID][ ][Data][Cr]  
Transmission  
Data 00 : Power Off  
Ack  
01 : Power On  
[k][e][ ][Set ID][ ][Data][Cr]  
Data 00 : Volume mute on (Volume off)  
01 : Volume mute off (Volume on)  
[a][ ][Set ID][ ][OK][Data][x]  
Ack  
G To show Power On/Off.  
Transmission  
[e][ ][Set ID][ ][OK][Data][x]  
[k][a][ ][Set ID][ ][FF][Cr]  
Ack  
05. Volume Control (Command 2 : f)  
G To adjust volume.  
You can also adjust volume with the VOLUME buttons on  
remote control.  
[a][ ][Set ID][ ][OK][Data][x]  
* Similarly, if other functions transmit ‘0xFF’ data based on  
this format, Acknowledgement data feed back presents  
status about each function.  
Transmission  
[k][f][ ][Set ID][ ][Data][Cr]  
Data Min : 00 ~ Max : 64  
Refer to ‘Real data mapping 1. See page 112.  
*
02. Aspect Ratio (Command 2 : c)  
Ack  
G To adjust the screen format.  
You can also adjust the screen format using the ARC  
(Aspect Ratio Control) button on remote control or in  
the SCREEN menu.  
[f][ ][Set ID][ ][OK][Data][x]  
06. Contrast (Command 2 : g)  
G To adjust screen contrast.  
Transmission  
You can also adjust contrast in the PICTURE menu.  
[k][c][ ][Set ID][ ][Data][Cr]  
Transmission  
Data 00 : Normal screen (4:3)  
01 : Wide screen (16:9)  
02 : Zoom1  
04 : Original  
05 : 14:9  
[k][g][ ][Set ID][ ][Data][Cr]  
Data Min : 00 ~ Max : 64  
Refer to ‘Real data mapping 1. See page 112.  
*
03 : Zoom2  
Ack  
Ack  
[g][ ][Set ID][ ][OK][Data][x]  
[c][ ][Set ID][ ][OK][Data][x]  
07. Brightness (Command 2 : h)  
* Using the PC input, you select either 16:9 or 4:3  
screen aspect ratio.  
G To adjust screen brightness.  
You can also adjust brightness in the PICTURE menu.  
Transmission  
[k][h][ ][Set ID][ ][Data][Cr]  
03. Screen Mute (Command 2 : d)  
Data Min : 00 ~ Max : 64  
G To select screen mute on/off.  
Refer to ‘Real data mapping 1. See page 112.  
*
Transmission  
Ack  
[k][d][ ][Set ID][ ][Data][Cr]  
[h][ ][Set ID][ ][OK][Data][x]  
Data 00 : Screen mute on (Picture off)  
01 : Screen mute off (Picture on)  
Ack  
[d][ ][Set ID][ ][OK][Data][x]  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
08. Colour (Command 2 : i)  
13. Balance (Command 2 : t)  
G To adjust the screen colour.  
G To adjust balance.  
You can also adjust colour in the PICTURE menu.  
You can also adjust balance in the AUDIO menu.  
Transmission  
Transmission  
[k][i][ ][Set ID][ ][Data][Cr]  
[k][t][ ][Set ID][ ][Data][Cr]  
Data Min : 00 ~ Max : 64  
Data Min : 00 ~ Max : 64  
Refer to ‘Real data mapping 1. See page 112.  
*
Refer to ‘Real data mapping 1. See page 112.  
*
Ack  
Ack  
[i][ ][Set ID][ ][OK][Data][x]  
09. Tint (Command 2 : j)  
[t][ ][Set ID][ ][OK][Data][x]  
G To adjust the screen tint.  
14. Colour Temperature (Command 2 : u)  
You can also adjust tint in the PICTURE menu.  
G To adjust colour temperature. You can also adjust Colour  
Transmission  
Temperature in the PICTURE menu.  
[k][j][ ][Set ID][ ][Data][Cr]  
Transmission  
[k][u][ ][Set ID][ ][Data][Cr]  
Data Red : 00 ~ Green : 64  
Refer to ‘Real data mapping 1. See page 112.  
*
Data 00: Cool 01: Medium 02: Warm 03: User  
Ack  
Ack  
[j][ ][Set ID][ ][OK][Data][x]  
[u][ ][Set ID][ ][OK][Data][x]  
10. Sharpness (Command 2 : k)  
G To adjust the screen sharpness.  
15. Red Adjustment (Command 2 : v)  
You can also adjust sharpness in the PICTURE menu.  
GTo adjust red in colour temperature.  
Transmission  
Transmission  
[k][k][ ][Set ID][ ][Data][Cr]  
[k][v][ ][Set ID][ ][Data][Cr]  
Data Min : 00 ~ Max : 64  
Data Min : 00 ~ Max : 50  
Refer to ‘Real data mapping 1. See page 112.  
*
Refer to ‘Real data mapping 2. See page 112.  
*
Ack  
Ack  
[k][ ][Set ID][ ][OK][Data][x]  
[v][ ][Set ID][ ][OK][Data][x]  
11. OSD Select (Command 2 : l)  
G To select OSD (On Screen Display) on/off when con-  
16. Green Adjustment (Command 2 : w)  
trolling remotely.  
G To adjust green in colour temperature.  
Transmission  
Transmission  
[k][l][ ][Set ID][ ][Data][Cr]  
[k][w][ ][Set ID][ ][Data][Cr]  
Data 00 : OSD off  
Ack  
01 : OSD on  
Data Min : 00 ~ Max : 50  
Refer to ‘Real data mapping 2. See page 112.  
*
[l][ ][Set ID][ ][OK][Data][x]  
Ack  
12. Remote control lock mode (Command 2 : m)  
[w][ ][Set ID][ ][OK][Data][x]  
G To lock the front panel controls on the monitor and  
remote control.  
17. Blue Adjustment (Command 2 : $)  
G To adjust blue in colour temperature.  
Transmission  
Transmission  
[k][m][ ][Set ID][ ][Data][Cr]  
Data 00 : Lock off  
Ack  
01 : Lock on  
[k][$][ ][Set ID][ ][Data][Cr]  
Data Min : 00 ~ Max : 50  
[m][ ][Set ID][ ][OK][Data][x]  
Refer to ‘Real data mapping 2. See page 112.  
*
Ack  
* If you are not using the remote control, use this mode.  
When main power is on/off, external control lock is  
released.  
[$][ ][Set ID][ ][OK][Data][x]  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
APPENDIX  
18. Abnormal State (Command 2 : z)  
20. Low Power  
(Command 1 : j, Command 2 : q)  
G To recognize an abnormal state.  
G To reduce the power consumption of the TV. You can  
Transmission  
also adjust Low Power in OPTION menu.  
[k][z][ ][Set ID][ ][FF][ ][Cr]  
Data FF : Read  
Ack  
Transmission  
[j][q][ ][Set ID][ ][Data][ ][Cr]  
[z][ ][Set ID][ ][OK][Data][x]  
Data 00 : Off  
01 : On  
Ack  
Data 00: Normal (Power on and signal exist)  
01: No signal (Power on)  
02: Turn the TV off by remote control  
03: Turn the TV off by sleep time function  
04: Turn the TV off by RS-232C function  
05: 5V down  
[q][ ][Set ID][ ][OK/NG][Data][x]  
06: AC down  
07: Turn the TV off by Fan Alarm function  
08: Turn the TV off by Off time function  
09: Turn the TV off by Auto sleep function  
21. Orbiter Time Setting  
(Command 1 : j, Command 2 : r)  
G To adjust orbiter operation time term.  
* This function is “read only.  
Transmission  
[j][r][ ][Set ID][ ][Data][ ][Cr]  
19. ISM Method  
(Command 1 : j, Command 2 : p)  
Data Min: 01 ~ Max: FE  
Refer to ‘Real data mapping 1.  
*
G To control the ISM method. You can also adjust ISM  
Ack  
Method in OPTION menu.  
[r][ ][Set ID][ ][OK/NG][Data][x]  
Transmission  
[j][p][ ][Set ID][ ][Data][Cr]  
Data 00: Normal  
01: White wash  
02: Orbiter  
03: Inversion  
22. Orbiter Pixel Setting  
(Command 1 : j, Command 2 : s)  
Ack  
GTo adjust pixel number in orbiter function.  
[p][ ][Set ID][ ][OK/NG][Data][x]  
Transmission  
[j][s][ ][Set ID][ ][Data][Cr]  
Data Min: 01 ~ Max: 03  
Refer to ‘Real data mapping 1.  
*
Real data mapping 1  
00 : Step 0  
Real data mapping 2  
*
*
Ack  
[s][ ][Set ID][ ][OK/NG][Data][x]  
00 : -40  
01 : -39  
02 : -38  
A : Step 10 (Set ID 10)  
F : Step 15 (Set ID 15)  
10 : Step 16 (Set ID 16)  
28 :0  
64: Step 100  
6E : Step 110  
4E : +38  
4F : +39  
50 : +40  
73: Step 115  
74 : Step 116  
C7: Step 199  
FE : Step 254  
FF : Step 255  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23. Auto Configure  
26. Input select (Command 1 : x, Command 2 : b)  
(Command 1 : j, Command 2 : u)  
GTo adjust picture position and minimize image shaking  
automatically. It works only in RGB (PC) mode.  
G To select input source.  
Transmission  
Transmission  
[x][b][ ][Set ID][ ][Data][Cr]  
Data Structure  
[j][u][ ][Set ID][ ][Data][Cr]  
Data 01: To set  
Ack  
MSB  
0
LSB  
0
[u][ ][Set ID][ ][OK/NG][Data][x]  
0
0
0
0
0
0
External Input  
Input Number  
24. Channel Select Command  
External Input  
Data  
DTV  
(Command 1 : m, Command 2 : a)  
0
0
0
0
0
0
0
0
0
0
1
1
0
1
0
1
G Select channel to following physical number.  
Transmission  
Analogue  
AV  
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]  
Data00 : High channel data  
Data01 : Low channel data  
ex. No. 47 -> 00 2F (2FH)  
No. 394 -> 01 88 (188H),  
DTV No. 0 -> Don’t care  
Data020x00 : ATV Main  
0x10 : DTV Main  
Component  
0
0
1
1
0
0
0
1
RG  
B
HDMI  
Channel data range  
Input Number  
Data  
Analogue - Min: 00 ~ Max: 63 (0~99)  
Digital - Min: 00 ~ Max: 3E7 (0~999)  
0
0
0
0
0
0
0
0
0
0
1
1
0
1
0
1
Input1  
Input2  
Input3  
Input4  
Ack  
[a][ ][Set ID][ ][OK/NG][Data][x]  
Data Min: 00 ~ Max: 7D  
Ack  
[b][ ][Set ID][ ][OK/NG][Data][x]  
25. Send IR Code  
(Command 1 : m, Command 2 : c)  
G To send IR remote key code.  
Transmission  
[m][c][ ][Set ID][ ][Data][Cr]  
Data Key code - Refer to page 106.  
Ack  
[c][ ][Set ID][ ][OK/NG][Data][x]  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lenovo DVD Player 9227 HB2 User Manual
Leupold Home Safety Product Alumina User Manual
LG Electronics Cell Phone UX3300 User Manual
Mace Security Camera CAM91 User Manual
Makita Power Hammer HR3851 User Manual
Makita Power Screwdriver FS4000 User Manual
Makita Trimmer UH 4540 UH 5540 UH 6540 User Manual
Manley Labs Stereo Amplifier 75 150 SE PP 807 MONOBLOCK User Manual
MaxTech Computer Monitor XT 5871 User Manual
Maytag Washer W10240518A User Manual