MaxTech Computer Monitor XT 5871 User Manual

XT-5871  
USER'S MANUAL  
Features  
0.28 mm Dot Pitch  
1280 x 1024, Non-Interlaced  
120 Hz Refresh Rate  
PowerSavingOperation(VESADPMS)  
Anti-Glare Screen  
Full Screen Display  
Digital Controls  
Low Radiation  
Plug and Play  
Three-Year Warranty  
Part#MAN119Rev. 1.0  
CX1566  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 1 - General Information  
Congratulations on purchasing a MaxTech 15-inch high resolution color monitor.  
The monitor uses one of the finest CRTs available in the industry. The 0.28 mm  
dot pitch non-glare tube provides a crisp and vivid color display for all popular  
applications. The monitor complies with the MRP-I standard to reduce electro-  
magnetic emissions. Advanced electronics and digital controls make it the perfect  
monitor for applications ranging from home computing to business presentations.  
The monitor is compatible with VGA, SVGA, and XGA display adapters. It  
operates at resolutions ranging from 640 x 350 to 1280 x 1024 with unlimited  
colors. The monitor is PnP (Plug and Play) compliant to simplify setup and  
configuration in Windows 95 or other PnP operating systems.  
1.1 Precautions When Using the Monitor  
When setting up and using your monitor, pay special attention to the following:  
• To eliminate eye fatigue, do not use your monitor against a bright background  
or where sunlight or other light sources will shine directly on the monitor.  
• Your monitor should be placed just below eye level for optimum viewing.  
• Allow adequate ventilation around the monitor so that heat from the monitor  
can properly dissipate.  
• Neither the monitor itself nor any other heavy object should rest on the power  
cord. Damage to a power cord can cause fire or electrical shock.  
• Keep the monitor away from high capacity transformers, electric motors and  
other strong magnetic fields.  
• Do not use your monitor in a damp, dusty or dirty area.  
• Handle the monitor with care when transporting.  
• Unplug the monitor during electrical storms  
Section 2 - Installation  
2.1 Attaching the Base  
• Carefully place the monitor on its side or top (see Figure 2-1).  
• Insert the hooks on the swivel base into the slots in the bottom of the monitor.  
Push down and forward on the base until the it snaps into place.  
• Place the display upright in an appropriate location.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Figure 2-1 Connecting the Base  
2.2 Connecting the Cable  
• Plug the 15-pin male connector on the video cable into the output connector  
on the rear of your computer system. The video output connector on your  
computer may be either in a location similar to Figure 2-2 or on an expansion  
board. Secure the cable to the computer using the thumbscrews on the 15-  
pin connector.  
• Attach the power cord to the monitor and plug it into an AC outlet.  
• The monitor is now ready for use.  
Figure 2-2 Monitor Connections  
ards  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 3 - Monitor Controls and LEDs  
Figure 3-1 Controls and LEDs  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Master Power (On rear): Push to provide power to the monitor. This switch  
should be left ON for daily operation. Use the front panel On/Off control (5) to  
turn the monitor display on and off.  
2. Adjust: Press plus (+) to increase the setting for the selected control (9  
through 14). Press minus (-) to decrease the setting.  
3. Brightness Control: Adjusts the display brightness.  
4. Contrast Control: Adjusts the contrast of the display.  
5. ON/OFF: Press this switch to turn the monitor display on, press again to turn  
the monitor display off.  
6. Power Saving Indicator: When lit, the monitor is in the DPMS OFF mode.  
7. Degauss: Press to clear color impurity of the display.  
8. Recall: Press to reset the factory defaults for the display.  
9. Trapezoid: Select to adjust the angle of the sides of the display to make the  
display rectangular.  
10. Pincushion: Select to adjust the curvature of the sides of the display to make  
the sides straight.  
11. Vertical-Position: Select to adjust the vertical position  
12. Vertical-Size: Select to adjust the display height  
13. Horizontal-Position: Select to adjust the horizontal position  
14. Horizontal-Size: Select to adjust the display width.  
Section 4 - Troubleshooting  
No picture, no LEDs lit.  
Check that the AC cord is plugged into an outlet and the monitor.  
Turn on the Master Power switch.  
No picture, one of the selection LEDs is lit.  
Check that video cable is connected completely.  
Adjust brightness and contrast controls.  
Check connector for bent pins.  
No picture, power saving indicator (2) on.  
Monitor is in DPMS OFF mode. Press a key or move the mouse.  
Monitor is off. Press front panel On/Off switch.  
Check connector for bent pins.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image is not centered  
Adjust Vertical Position and Horizontal Position controls.  
Appendix A - Specifications  
Picture Tube  
Size  
Dot pitch  
15-inch diagonal  
0.28mm  
Horizontal Freq  
Vertical Freq.  
Resolution (Max.)  
Video Dot Rate  
Data Area  
30-66KHz  
50-120 Hz  
1280 x 1024  
100 MHz  
10.2 in. x 7.7 in.  
Maximum Refresh Rates  
Resolution  
Refresh (Vertical) Frequency  
640 x 480  
800 x 600  
1024 x 768  
1280 x 1024  
120Hz  
100 Hz  
75 Hz  
60 Hz  
Input voltage  
Front controls  
110~240VAC, 50/60 Hz  
On/Off, Brightness, Contrast, Horizontal-Size, Horizontal-  
Position,Vertical-Size,Vertical-Position,Pincushion,Trap-  
ezoid, Recall, Degauss  
Rear Control  
Master Power  
80 W (Max.)  
Power  
Consumption  
Power saving  
Display Power Management Signaling (DPMS)  
SUSPEND/STANDBY mode  
OFF mode  
20W (Max.)  
1W (Max.)  
Low Radiation  
Standard  
MPR-I  
Plug and Play  
DDC1, DDC2B  
Operating  
Environment  
Temperature  
Humidity  
5°~35°C  
30~80%  
Connector  
15 Pin D-Sub  
Dimensions  
12.88 x 14.13 x 15.63 in.  
Specifications subject to change without notice.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix B - Video Cable Pinout  
Figure B-1 Pin Layout and Pin Assignment Chart  
PIN SIGNAL  
PIN SIGNAL  
No Pin  
1
2
3
4
5
6
7
Red  
9
Green  
10 Ground  
11 Ground  
12 SDA  
Blue  
No Pin  
Ground  
Red Return  
Green Return  
13 Hor. Synch.  
14 Vert. Synch  
15 Data Clock  
(SCL)  
8
Blue Return  
Appendix C - Power Saving Modes (DPMS)  
VESA Display Power Management Signaling (DPMS) defines a method for a  
computer to signal the monitor to reduce its power consumption when idle. DPMS  
features must be supported by both the computer and the monitor. The monitor  
supports DPMS “SUSPEND” “STANDBY” and “OFF” modes. Computer support  
of DPMS requires the use of a DPMS compliant video card driver.  
The monitor enters DPMS STAND-BY or SUSPEND mode when the computer  
turns off either the Horizontal or Vertical Synchronization signal. These power-  
saving modes reduce the monitor’s power consumption to 20W. While in these  
modes the selection indicator LEDs flash consecutively from right to left and then  
back. When the synchronization signals are re-enabled the monitor returns to  
normal operation.  
The monitor enters DPMS OFF mode when the computer turns off both the  
Horizontal and Vertical Synchronization signals. This mode reduces the monitor’s  
power consumption to 1W. When the synchronization signals are re-enabled the  
monitor returns to normal operation.  
Appendix D - Three Year Warranty  
MAXTECH warrants to the original buyer of this product against defects in  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
material and workmanship for three years from the date of purchase.  
Except as specified below, this warranty covers all defects in material or  
workmanship in this product. The following are not covered by the warranty:  
1. Any product which is not distributed in North America by MAXTECH or which  
is not purchased in North America from an authorized MAXTECH Dealer.  
2. Any product on which the serial number has been defaced, modified or  
removed.  
3. Damage, deterioration or malfunction resulting from:  
a. Accident, misuse, abuse, neglect, fire, water, lightning or other acts of  
nature, commercial or industrial use, unauthorized product modification, or  
failure to follow instructions supplied with the product.  
b. Repair or attempted repair by anyone not authorized by MAXTECH.  
c. Any shipment of the product (claims must be presented to the carrier).  
d. Removal or installation of the product.  
e. Any other cause which does not relate to a product defect.  
4. Cartons, carrying cases, batteries, external cabinets, magnetic tapes or any  
accessories used in connection with the product.  
MAXTECH will pay all labor and material expenses for covered items, but we will  
not pay for the following:  
1. Removal or installation charges.  
2. Costs of initial technical adjustments (set-up), including adjustment of user  
controls.  
3. Payment of shipping charges.  
HOW TO OBTAIN WARRANTY SERVICE  
Intheeventtheproductrequiresservice, calltheMaxTechServiceCenterat(562)  
921-4438 between 9:00 a.m. and 6:00 p.m. (PST Monday through Friday). When  
you are instructed by the Technical Support Representative to return the product  
to MaxTech for repair, you will be given an RMA (Return Merchandise Authoriza-  
tion) number. You must have an RMA Number to return the product for  
service. Use the following procedure to return the product to MaxTech:  
1. Return the product in its original package and packing (if possible).  
2. Be sure to include your name, address, day-time telephone number, RMA  
number, and a brief description of the problem (also enclose a check for  
out-of-warranty repair).  
3. After wrapping the package securely for shipping, print your name, return  
address and the RMA # clearly on the outside of your package.  
4. Ship the unit prepaid via UPS or the U.S. Postal Service to the address  
provided by the technician when you call. We recommend that the unit be  
insured.  
This warranty is valid for products sold in North America only. Contact your local  
authorized distributor or dealer for the warranty offered in other areas.  
All warranty services must be performed by Authorized Service Centers. There  
are no user serviceable parts inside the unit. Do not remove any components or  
attempt to service the unit by any unauthorized service center. This warranty is  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
voided if the product has been abused, misused, modified, or repaired by an  
unauthorized service center.  
LIMITATION OF IMPLIED WARRANTIES  
All implied warranties, including warranties of merchantability and fitness for a  
particular purpose, are limited in duration to the length of this warranty.  
EXCLUSION OF DAMAGES  
MAXTECH'S liability for any defective product is limited to the repair or replace-  
ment of the product, at our option. MAXTECH shall not be liable for:  
1. Damage to other property caused by any defects in this product, damages  
based upon inconvenience, loss of use of the product, loss of time, commer-  
cial loss; or  
2. Any other damages, whether incidental, consequential or otherwise.  
Some states do not allow limitations on how long an implied warranty lasts and/  
or do not allow the exclusion or limitation of incidental or consequential damages,  
so the above limitations and exclusions may not apply to you.  
HOW STATE LAW RELATES TO THE WARRANTY  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
Appendix E - Notices  
FCC Class B Statement  
This equipment has been tested and found to comply with the limits for a Class  
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy, and if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna  
• Increase the separation between the equipment and the receiver  
• Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected  
• Consult the dealer or an experienced radio / TV technician for help  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice: Shielded cables, if any, must be used in order to comply with the emission  
limits. Any change or modification not expressly approved by the Grantee of the  
equipment authorization could void the user’s authority to operate the equipment.  
Canadian DOC Compliance Statement  
This equipment does not exceed Class B limits for radio noise emissions for a  
digital apparatus, set out in the Radio Interference Regulations of the Canadian  
Department of Communications. Operation in a residential area may cause  
unacceptable interference to radio and TV reception requiring the owner or  
operator to take whatever steps necessary to correct the interference.  
Cet équipement ne dépasse pas les limits de Class B d'émission de bruits  
radioélectriques pour les appareils numériques, telles que prescrites par le  
Règlement sur le brouillage radioélectrique établi par le ministère des Commu-  
nications du Canada. L'exploitation faite en milieu résidentiel peut entraîner le  
propriétaire ou l'opérateur à prendre dispositions nécessaires pour en éliminer  
les causes.  
Disclaimer, Copyright, And Other Notices  
The information contained in this manual has been validated at the time of this  
manual's production. The manufacturer reserves the right to make any changes  
and improvements in the product described in this manual at any time and without  
notice. Consequently, the manufacturer assumes no liability for damages in-  
curred directly or indirectly from errors, omissions or discrepancies between the  
product and the manual.  
All registered trademarks are the property of their respective owners.  
Copyright © 1997 MAXTECH. All rights reserved. No reproduction of this  
document in any form is allowed without written permission from MAXTECH.  
First Edition  
GZ/DR - Version 1.0  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Kyocera Cell Phone K126C User Manual
Lenoxx Electronics Cassette Player 8980 FM User Manual
Lenoxx Electronics Speaker DSP 26A User Manual
Liebert Network Card EIA 485 232 User Manual
Life Fitness Flat Panel Television 0201 03 User Manual
Link electronic Universal Remote PSR 826 User Manual
Magnavox TV DVD Combo 19MD359B User Manual
Marmitek Satellite TV System 20095 User Manual
Mellerware Iron 2 3 4 5 02 0 0 0 W User Manual
Meyer Sound Speaker UMS SM User Manual