LG Electronics Flat Panel Television 20LS7D User Manual

LCD TV

OWNER’S MANUAL

LCD TV MODELS

20LS7D

20LS7DC

23LS7D

23LS7DC

Please read this manual carefully before operating

your set.

Retain it for future reference.

Record model number and serial number of the set.

See the label attached on the back cover and quote

this information to your dealer

when you require service.

ENERGY STAR is a set of power-saving

guidelines issued by the U.S.

Environmental Protection Agency(EPA).

As an ENERGY STAR

Partner LGE U. S. A.,Inc.

has determined that this

product meets the

ENERGY STAR guidelines

for energy efficiency.

_{Download from Www}w_.Sow_mw_an._ul_ag_lsu_.cos_ma_.._Ac_llo_Mam_nua/_{ls S}w_eaw_rchw_A._nl_dg_D.c_owa_nlo/_adw_.ww.lgcommercial.com

WARNING / CAUTION

To prevent fire or shock hazards, do not expose

this product to rain or moisture.

FCC NOTICE

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK). NO

USER SERVICEABLE PARTS INSIDE. REFER TO

QUALIFIED SERVICE PERSONNEL.

Class B digital device

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause harmful interference to

radio or television reception, which can be determined

by turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

The lightning flash with arrowhead

symbol, within an equilateral triangle, is

intended to alert the user to the presence

of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient

magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral

triangle is intended to alert the user to

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

the presence of important operating and

maintenance (servicing) instructions in the litera-

ture accompanying the appliance.

- Connect the equipment to an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

WARNING/CAUTION

TO REDUCE THE RISK OF FIRE AND ELECTRIC

SHOCK, DO NOT EXPOSE THIS PRODUCT TO

RAIN OR MOISTURE.

Any changes or modifications not expressly approved

by the party responsible for compliance could void

the user’s authority to operate the equipment.

NOTE TO CABLE/TV INSTALLER

CAUTION

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the National

Electric Code (U.S.A.). The code provides guidelines for

proper grounding and, in particular, specifies that the

cable ground shall be connected to the grounding system

of the building, as close to the point of the cable entry

as practical.

Do not attempt to modify this product in any way

without written authorization from LG Electronics.

Unauthorized modification could void the user’s

authority to operate this product

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Important safety instructions shall be provided with each apparatus. This information shall be given in a separate

booklet or sheet, or be located before any operating instructions in an instruction for installation for use and

supplied with the apparatus.

This information shall be given in a language acceptable to the country where the apparatus is intended to

be used.

The important safety instructions shall be entitled “Important Safety Instructions”. The following safety

instructions shall be included where applicable, and, when used, shall be verbatim as follows. Additional safety

information may be included by adding statements after the end of the following safety instruction list. At

the manufacturer’s option, a picture or drawing that illustrates the intent of a specific safety instruction may

be placed immediately adjacent to that safety instruction :

Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has

two blades with one wider than the other. A

grounding type plug has two blades and a third

grounding prong, The wide blade or the third

prong are provided for your safety. If the pro-

vided plug does not fit into your outlet, con-

sult an electrician for replacement of the obso-

lete outlet.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit from

the apparatus.

Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

Only use attachments/accessories specified by

the manufacturer.

Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers)that produce heat.

ner

anual

Download from Www.Somanuals.com. All Manuals Search And Download.

Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or sold

with the apparatus. When a cart is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

with an exact replacement part by an authorized

servicer. Protect the power cord from physical

or mechanical abuse, such as being twisted,

kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall

outlets, and the point where the cord exits the

appliance.

Unplug this apparatus during lightning storms

or when unused for long periods of time.

Outdoor use marking :

WARNING - To reduce the risk of fire or electric

shock, do not expose this appliance to rain or

moisture.

Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has

been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus,

the apparatus has exposed to rain or moisture,

does not operate normally, or has been

dropped.

Wet Location Marking : Apparatus shall not be

exposed to dripping or splashing and no

objects filled with liquids, such as vases, shall

be placed on or over apparatus.

GROUNDING

Ensure that you connect the earth ground wire

to prevent possible electric shock. If grounding

methods are not possible, have a qualified

electrician install a separate circuit breaker.

CAUTION concerning the Power Cord :

Most appliances recommend they be placed

upon a dedicated circuit; that is, a single outlet

circuit which powers only that appliance and

has no additional outlets or branch circuits.

Check the specification page of this owner's

manual to be certain.

Do not try to ground the unit by connecting it

to telephone wires, lightening rods, or gas pipes.

Power

Supply

Do not overload wall outlets. Overloaded wall

outlets, loose or damaged wall outlets, extension

cords, frayed power cords, or damaged or

cracked wire insulation are dangerous. Any of

these conditions could result in electric shock

or fire. Periodically examine the cord of your

appliance, and if its appearance indicates dam-

age or deterioration, unplug it, discontinue use

of the appliance, and have the cord replaced

Short-circuit

Breaker

DISCONNECTING DEVICE FROM MAINS

Mains plug is the disconnecting device. The

plug must remain readily operable.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

WARNING / CAUTION

SAFETY INSTRUCTIONS

INTRODUCTION

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

PICTURE CONTROL

. . . . . . . . . . . . . . . . . . . . . . . . . .

Picture Size (Aspect Ratio) Control

. . . . . . . . . . . . . . . . . .

Preset Picture Settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- EZ Picture - Preset

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Feature of this TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- Color Tone - Preset.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Manual Picture Adjustment

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

PREPARATION

- EZ Picture - User Mode

- Color Tone - User Mode

XD - Picture Improvement Technology

Advanced - Black (Darkness) Level

Picture Reset

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Accessories

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . .

Front Panel Information

Back Panel Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stand Installation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Detaching Stand

Back Cover for Wire Arrangement

Positioning your display

VESA Wall Mounting

. . . . . . . . . . . . . . . . . . . . .

SOUND & LANGUAGE CONTROL

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preset Sound Setting (EZ Sound)

. . . . . . . . . . . . . . . . . . . . .

Desktop Pedestal Installation

Kensington Security System

Attaching the TV to a Desk

. . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sound Setting Adjustment - User Mode

. . . . . . . . . . .

Balance

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Stereo/SAP Broadcasts Setup

. . . . . . . . . . . . . . . . . . . . . . . . . .

Antenna or Cable Connection

. . . . . . . . . . . . . . . . . . . . . . . . . .

Audio Language

On-Screen Menus Language Selection

Caption/Text

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

EXTERNAL EQUIPMENT SETUP

- Analog Broadcasting System Captions

- Digital Broadcasting System Captions

. . . . . . .

HD Receiver Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . .

DVD Setup

VCR Setup

Caption Option

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Headphone Setup

PC Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

WATCHING TV / CHANNEL CONTROL

Remote Control Functions

Turning On TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Selection

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Volume Adjustment

On-Screen Menus Selection

Channel Setup

- Auto Scan (EZ Scan)

- Add / Delete Channel (Manual Scan)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . .

- Channel Editing

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DTV Signal Strength

Input Source Selection

Download from Www.Somanuals.com. All Manuals Search And Download.

TIME SETTING

Clock Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- Auto Clock Setup

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- Manual Clock Setup

Auto On/Off Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Sleep Timer Setting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Auto Shut-off Setting

PARENTAL CONTROL / RATINGS

Set Password & Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . .

- Setting up Your Password

- Set Password

- Lock System

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Channel Blocking

External Input Blocking

Movie & TV Rating

- Movie Rating (MPAA)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

- TV Rating Children & General ^{(for USA only)}. . 64

- TV Rating English & French ^{(for Canada only)}. . 65

APPENDIX

Troubleshooting

Maintenance

Product Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

External Control Through RS-232C ^{. . . . . . . . . . . . . . . . . .}70

Download from Www.Somanuals.com. All Manuals Search And Download.

INTRODUCTION

FEATURE OF THIS TV

LG's own special digital image generator, consisting

Manufactured under license from Dolby Laboratories.

“Dolby “and the double-D symbol are trademarks of

Dolby Laboratories.

of a full digital image processor, six different main

picture quality factors.

HDMI^TM, the HDMI logo and High-Definition

Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing."

High-definition television. High-resolution digital

television broadcast and playback system composed

of roughly a million or more pixels, 16:9 aspect-ratio

screens, and AC3 digital audio. A subset of digital

television, HDTV formats include 1080i and 720p

resolutions.

If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is noth-

ing wrong with TV.

Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they

have no adverse effect on the monitor's performance.

Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce

some temporary distortion effects on the screen.

On Disposal

a. The fluorescent lamp used in this product contains a small amount of mercury.

b. Do not dispose of this product with general household waste.

c. Disposal of this product must be carried out in accordance to the regulations of your local authority.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

ACCESSORIES

Ensure that the following accessories are included with your product. If an accessory is missing, please contact

the dealer where you purchased the product.

User must use shielded signal interface cables (D-sub 15 pin cable) with ferrite cores to maintain standard

compliance for the product.

Owner's Manual

LCD TV

Owner's Manual

1.5V 1.5V

http://www.lgusa.com

www.lg.ca

Owner’s Manual

CD Manual

Remote Control,

Batteries

Power Cord

* Slightly wipe stained spot on the exterior only with the

polishing cloth for the product exterior if there is stain

or fingerprint on surface of the exterior.

* Do not wipe roughly when removing stain. Please be

cautions of that excessive pressure may cause scratch

or discoloration.

Cable Management

Polishing Cloth

Option Extras

D-sub 15 pin Cable

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

FRONT PANEL INFORMATION

Here shown may be somewhat different from your TV.

Button

VOLUME

(F,G)Buttons

INPUT

Button

POWER

Button

ENTER

Button

CHANNEL

(E,D)Buttons

INPUT

ENTER

VOL

Remote Control Sensor

Power Standby Indicator

Illuminates red in standby mode.

When the TV is turned on, the indicator

blinks green and then illuminates green

before the picture is displayed.

NOTE

_GIf your TV stand has a protection film, remove it attached to the stand.

Then wipe the stand with polishing cloth.

Download from Www.Somanuals.com. All Manuals Search And Download.

BACK PANEL INFORMATION

Here shown may be somewhat different from your TV.

HDMI/DVI IN

VIDEO

ANTENNA/

CABLE IN

AV IN

S-VIDEO

AUDIO

AUDIO IN

(RGB/DVI)

RGB (PC) IN

SERVICE

ONLY

H/P

(MONO)

RS-232C IN

AUDIO

COMPONENT IN

VIDEO

(CONTROL & SERVICE)

SERVICE ONLY

HDMI/DVI IN

RGB (PC) IN

Connect the output from a PC.

AUDIO IN (RGB/DVI)

Connect a HDMI signal to this jack.

Connect the audio from a PC or DTV.

Or DVI (Video) signal to this jack with a HDMI to

DVI cable.

COMPONENT IN

Connect a component video/audio device to

these jacks.

AV IN (Audio/Video)

Connect audio/video output from an external

device to these jacks.

HEADPHONE INPUT

S-VIDEO

Plug the headphone into the headphone socket.

Connect S-Video out from an S-VIDEO device.

RS-232C IN (CONTROL & SERVICE) PORT

ANTENNA/CABLE IN

For external control devices.

Connect over-the air signals to this jack.

Connect cable signals to this jack.

9 Power Cord Socket

For operation with AC power.

Caution: Never attempt to operate the TV on DC

power.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

STAND INSTALLATION

Here shown may be somewhat different from your TV.

Assemble parts of the stand body with cover base of the stand. Insert the stand body into a cover base

until clicking sound.

stand body

cover base

Carefully place the product screen side down on a cushioned surface that will protect product and screen

from damage.

Place the product stand on the product as shown.

Download from Www.Somanuals.com. All Manuals Search And Download.

DETACHING STAND

Here shown may be somewhat different from your TV.

Carefully place the product screen side down on

a cushioned surface that will protect product and

screen from damage.

Pull cover base backward while pressing button

on stand body.

Hold the stand and bend it upward.

Shake the base while pulling, it will separate from

stand body.

Pull stand body to separate from set while press-

ing the 2 latches.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Here shown may be somewhat different from your TV.

Connect the cables as necessary.

EXTERNAL EQUIPMENT SETUP

To connect an additional equipment, see the

section.

CABLE MANAGEMENT

Install the

as shown.

How to remove the CABLE MANAGEMENT

CABLE MANAGEMENT

First, press the cable management. Hold the

with both hands and pull it upward.

NOTE

_GDo not hold the

CABLE MANAGEMENT

when moving the product.

- If the product is dropped, you may be injured or the product may be broken.

Download from Www.Somanuals.com. All Manuals Search And Download.

POSITIONING YOUR DISPLAY

Here shown may be somewhat different from your TV.

Adjust the position of the panel in various ways for maximum comfort.

• Tilt range

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

VESA WALL MOUNTING

This product accepts a VESA-compliant mounting interface pad. (optional)

There 4 threaded holes are available for attaching the bracket.

100 mm

NOTE

_GScrew length needed depends on the wall mount used. For further information, refer to the VESA

Wall Mounting Instruction Guide.

DESKTOP PEDESTAL INSTALLATION

For proper ventilation, allow a clearance of 4inches on all four sides from the wall.

4 inches

_GEnsure adequate ventilation by following the clearance recommendations.

CAUTION

Download from Www.Somanuals.com. All Manuals Search And Download.

KENSINGTON SECURITY SYSTEM

- The TV is equipped with a Kensington Security System connector on the back panel. Connect the

Kensington Security System cable as shown below.

- For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided

with the Kensington Security System.

http://www.kensington.com

For further information, contact

, the internet homepage of the

Kensington company. Kensington sells security systems for expensive electronic equipment such as note-

book PCs and LCD projectors.

NOTE

- The Kensington Security System is an optional accessory.

ATTACHING THE TV TO A DESK (Only 23 inches)

We recommend that the TV be attached to a desk so it cannot be pulled in a forward/backward direction,

potentially causing injury or damaging the product.

2-Bolts (M3x25)

(not provided as parts

of the product)

Stand

Desk

WARNING

This apparatus must be securely attached to the floor/wall per installation instructions. Tipping, shak-

ing, or rocking the machine may cause injury/death.

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION

ANTENNA OR CABLE CONNECTION

1. Antenna (Analog or Digital)

Wall Antenna Socket or Outdoor Antenna without a Cable Box

Connections.

For optimum picture quality, adjust antenna direction if needed.

Multi-family Dwellings/Apartments

(Connect to wall antenna socket)

Wall

Antenna

Socket

ANTENNA/

CABLE IN

RF Coaxial Wire (75 ohm)

Outdoor

Antenna

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

(VHF, UHF)

Copper Wire

Be careful not to bend the bronze wire

when connecting the antenna.

2. Cable

Cable TV

Wall Jack

ANTENNA/

CABLE IN

RF Coaxial Wire (75 ohm)

3. Using both cable and antenna

Antenna

Diplexer

(Signal

Combiner)

RF Coaxial Wire (75 ohm)

ANTENNA/

CABLE IN

ANTENNA/

CABLE IN

Cable TV

Wall Jack

RF Coaxial Wire (75 ohm)

UHF

VHF

Signal

ANTENNA/

CABLE IN

Antenna

Amplifier

To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.

If the antenna needs to be split for two TV’s, install a 2-Way Signal Splitter.

If the antenna is not installed properly, contact your dealer for assistance.

_GThe TV will let you know when the analog, cable, and digital channel scans are complete.

NOTE

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment.

HD RECEIVER SETUP

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you

do receive digital signals from a digital set-top box or other digital external device, refer to the figure as shown

below.

When connecting Component cable

1. How to connect

(

)

Connect the video outputs Y, PB, PR of the digital set

COMPONENT IN VIDEO

top box to the

the set. Match the jack colors

jacks on

(Y = green, PB = blue, and PR = red).

Connect the audio output of the digital set-top box to

COMPONENT IN AUDIO

ANTENNA/

CABLE IN

I/DVI IN

VIDEO

the

jacks on the set.

AV IN

AUDIO

S-VIDEO

AUDIO IN

(RGB/DVI)

RGB (PC) IN

2. How to use

L(MONO)

Turn on the digital set-top box.

(

)

Refer to the owner’s manual for the digital set-top box. operation

H/P

)

AUDIO

VIDEO

Component

button on the remote control.

INPUT

input source by using the

Select

COMPONENT IN

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

When connecting HDMI cable

1. How to connect

HDMI/DVI IN

Connect the digital set-top box to

jack on the set.

No separated audio connection is necessary.

HDMI supports both audio and video.

HDMI/DVI IN

VIDEO

AV IN

AUDIO

S-VIDEO

SERVICE

ONLY

L(MONO)

2. How to use

H/P

Turn on the digital set-top box.

RS-232C IN

(CONTROL & SERVICE)

VIDEO

COMP

(

)

Refer to the owner’s manual for the digital set-top box.

HDMI/DVI

button on the remote control.

INPUT

input source by using the

Select

NOTE

HDMI-DTV OUTPUT

_GWhen connected, the TV will tell a connected device what

resolution it supports and the resolution it prefers. If the

device supports this Auto HDMI function, the player output

resolution will be automatically set to 720p.

_GIf the device does not support Auto HDMI, you need to set

the output resolution appropriately.

Download from Www.Somanuals.com. All Manuals Search And Download.

When connecting HDMI to DVI cable

ANTENNA/

CABLE IN

HDMI/DVI IN

AV IN

S-VIDEO

VIDEO

AUDIO

AUDIO IN

RGB (PC) IN

SERVICE

ONLY

(RGB/DVI)

L(MONO)

H/P

RS-232C IN

(CONTROL & SERVICE)

AUDIO

VIDEO

COMPONENT IN

DVI-DTV OUTPUT

1. How to connect

HDMI/DVI IN

Connect the DVI output of the digital set-top box to the

jack on the set.

(

AUDIO IN RGB/DVI

)

Connect the audio output of the digital set-top box to the

jack on the set.

2. How to use

(

Turn on the digital set-top box. Refer to the owner’s manual for the digital set-top box.

)

HDMI/DVI INPUT

input source by using the

Select

button on the remote control.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

DVD SETUP

When connecting Component cable

1. How to connect

(

)

Connect the video outputs Y, PB, PR of the DVD to the

COMPONENT IN VIDEO

Match the jack colors

jacks on the set.

(

)

Y = green, PB = blue, and PR = red .

Connect the audio outputs of the DVD to the

COMPONENT IN AUDIO

jacks on the set.

ANTENNA/

CABLE IN

MI/DVI IN

VIDEO

AV IN

AUDIO

S-VIDEO

2. How to use

AUDIO IN

(RGB/DVI)

RGB (PC) IN

Turn on the DVD player, insert a DVD.

L(MONO)

Component

button on the remote control.

INPUT

input source by using the

Select

H/P

AUDIO

VIDEO

COMPONENT IN

Refer to the DVD player's manual for operating instructions.

Component Input ports

To get better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

P^B

B-Y

P^R

R-Y

Video output ports

on DVD player

Download from Www.Somanuals.com. All Manuals Search And Download.

When connecting with an S-Video cable

1. How to connect

ANTENNA/

CABLE IN

HDMI/DVI IN

VIDEO

AV IN

AUDIO

S-VIDEO

Connect the S-VIDEO output of the DVD to the

S -VIDEO

input on the set.

AUD

RGB (PC) IN

(RG

L(MONO)

AUDIO

Connect the audio outputs of the DVD to the

input jacks on the set.

H/P

32C IN

& SERVICE)

AUDIO

COMPONENT IN

VIDEO

2. How to use

Turn on the DVD player, insert a DVD.

remote control.

INPUT

button on the

Select

input source by using the

Refer to the DVD player's manual for operating instructions.

S-VIDEO

AUDIO

When connecting HDMI cable

1. How to connect

Connect the HDMI output of the DVD to the

HDMI/DVI IN

jack on the set.

No separated audio connection is necessary.

HDMI supports both audio and video.

HDMI/DVI IN

VIDEO

AV IN

AUDIO

S-VIDEO

2. How to use

SERVICE

ONLY

L(MONO)

HDMI/DVI

button on the remote control.

INPUT

input source by using the

Select

H/P

Refer to the DVD player's manual for operating instructions.

RS-232C IN

(CONTROL & SERVICE)

VIDEO

COM

NOTE

_GWhen connected, the TV will tell a connected device what

resolution it supports and the resolution it prefers. If the

device supports this Auto HDMI function, the player out-

put resolution will be automatically set to 720p.

HDMI-DVD OUTPUT

_GIf the device does not support Auto HDMI, you need to

set the output resolution appropriately.

To get the best picture quality, adjust the output resolution

of the DVD to 720p.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

VCR SETUP

(

To avoid picture noise interference , leave an adequate distance between the VCR and TV.

)

If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the

screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty

does not cover the product bearing this phenomenon.

When connecting with an antenna

ANT OUT

ANT IN

VIDEO

S-VIDEO

OUTPUT

SWITCH

ANTENNA/

CABLE IN

HDMI/DVI IN

VIDEO

AV IN

AUDIO

S-VIDEO

Wall Jack

Antenna

AUDIO IN

(RGB/DVI)

RGB (PC) IN

SERVICE

ONLY

L(MONO)

H/P

RS-232C IN

(CONTROL & SERVICE)

AUDIO

VIDEO

COMPONENT IN

1. How to connect

ANTENNA/CABLE IN

Connect the RF antenna out socket of the VCR to the

socket on the set.

Connect the antenna cable to the RF antenna in socket of the VCR.

2. How to use

Set VCR output switch to 3 or 4 and then tune TV to the same channel number.

(

Insert a video tape into the VCR and press PLAY on the VCR. Refer to the VCR owner’s manual.

)

Download from Www.Somanuals.com. All Manuals Search And Download.

HDMI/DVI IN

VIDEO

AV IN

AUDIO

When connecting with a RCA cable

1. How to connect

S-VIDEO

RGB

SERVICE

ONLY

L(MONO)

AUDIO VIDEO

jacks between TV and

VCR. Match the jack colors (Video = yellow, Audio Left

= white, and Audio Right = red)

Connect the

H/P

RS-232C IN

(CONTROL & SERVICE)

VIDEO

COMPONENT

2. How to use

Insert a video tape into the VCR and press PLAY on the

)

(

VCR. Refer to the VCR owner’s manual.

ANT IN

S-VIDEO

VIDEO

remote control.

INPUT

button on the

Select

input source by using the

ANT OUT OUTPUT

SWITCH

NOTE

_GIf you have a mono VCR, connect the audio cable from

AUDIO L/MONO

the VCR to the

jack of the set.

When connecting with an S-Video cable

1. How to connect

ANTEN

CABLE

HDMI/DVI IN

AV IN

AUDIO

S-VIDEO

VIDEO

RGB (PC) IN

(MONO)

Connect the S-VIDEO output of the VCR to the

S -VIDEO

input on the set.

H/P

RS-232C IN

NTROL & SERVICE)

AUDIO

Connect the audio outputs of the VCR to the

input jacks on the set.

AUDIO

VIDEO

COMPONENT IN

2. How to use

Insert a video tape into the VCR and press PLAY on the VCR.

(

)

Refer to the VCR owner’s manual.

S-VIDEO

AUDIO

remote control.

INPUT

button on the

Select

input source by using the

CAUTION

_GDo not connect to both Video

and S-Video at the same time. In

the event that you connect both

Video and the S-Video cables,

only the S-Video will work.

NOTE

_GThe picture quality is improved: compared to normal

composite (RCA cable) input.

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

HEADPHONE SETUP

You can listen to the sound through the headphone.

1. How to connect

Plug the headphone into the headphone socket.

HDMI/DVI IN

VIDEO

VOL

To adjust the headphone volume, press the

+ or

button, the sound

from the headphone is switched off.

MUTE

- button. If you press the

SERVICE

ONLY

L(MON

H/P

RS-232C IN

(CONTROL & SERVICE)

Download from Www.Somanuals.com. All Manuals Search And Download.

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

AV IN

S-VIDEO

AUDIO

When connecting D-sub 15pin cable

AUDIO IN

RGB (PC) IN

(RGB/DVI)

L(MONO)

1. How to connect

(

RGB PC

)

Connect the RGB output of the PC to the

jack on the set.

AUDIO

VIDEO

COMPONENT IN

AUDIO IN

Connect the PC audio output to the

(

)

RGB/DVI

jack on the set.

2. How to use

Turn on the PC and the TV.

RGB-PC

on the remote control.

INPUT

button

Select

input source by using the

RGB OUTPUT

AUDIO

When connecting HDMI to DVI cable

1. How to connect

NNA/

HDMI/DVI IN

LE IN

AV IN

AUDIO

VIDEO

AUDIO IN

(RGB/DVI)

HDMI/DVI

Connect the DVI output of the PC to the

SERVICE

ONLY

jack on the set.

L(MONO)

AUDIO IN

Connect the PC audio output to the

)

H/P

(

RS-232C IN

RGB/DVI

jack on the set.

(CONTROL & SERVICE)

DIO

2. How to use

Turn on the PC and the TV.

HDMI/DVI

ton on the remote control.

INPUT

but-

Select

input source by using the

AUDIO

DVI-PC OUTPUT

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL EQUIPMENT SETUP

NOTES

adjust the brightness and contrast on the VIDEO

menu until the picture is clear. If the refresh rate of

the PC graphic card can not be changed, change

the PC graphic card or consult the manufacturer of

the PC graphic card.

_GTo get the the best picture quality, adjust the PC

graphics card to 1024x768, 60Hz.

_GDepending on the graphics card, DOS mode may

not work if a HDMI to DVI Cable is in use.

_GIf the video doesn’t fit the screen, try pressing the

ADJUST button to adjust the screen position of TV.

_GAvoid keeping a fixed image on the screen for a

long period of time. The fixed image may become

permanently imprinted on the screen.

_GCheck the image on your TV. There may be noise

associated with the resolution, vertical pattern,

contrast or brightness in PC mode. If noise is

present, change the PC output to another resolu-

tion, change the refresh rate to another rate or

_GThe synchronization input form for Horizontal and

Vertical frequencies is separate.

Supported Display Specifications

Horizontal

(

Frequency KHz

Vertical

(

Frequency Hz

Resolution

)

640x350

720x400

31.469

37.879

48.363

47.776

47.712

60.023

70.08

59.94

60.31

60.00

59.87

60.01

60.00

* RGB-PC mode only

640x480

800x600

1024x768

1280x768

1360x768

1366x768

31.469

31.500

59.94

60.00

720x480

* HDMI mode only

44.96

45.000

59.94

60.00

1280x720

33.72

33.75

59.94

60.00

1920x1080

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen Setup for PC mode

Overview

ADJUST

EXIT

When the RGB input of the set is connected to a PC output, select

the RGB-PC as the main input mode.

ENTER

When HDMI connect to PC output and select HDMI/DVI input, this

function is used.

After connecting RGB-PC or HDMI/DVI to PC ouput and checking

the screen quality.

When you change the resolution, select the proper resolution in pre-

sent input to see the best picture appearance.

Resolution

Position

Size

1024 x 768

1280 x 768

1360 x 768

1366 x 768

Adjustment for screen Resolution, Position, Size,

and Phase

Phase

ADJUST

Resolution Position Size Phase

Press the

select

button and then use _Dor _Ebutton to

Reset

, or

Move

ENTER

make appropriate adjustments.

Press the

button and then use _{D E F G}button to

Phase

-16 +16

The

adjustment range is

Phase

Resolution This function allows you select

resolution of XGA/WXGA.

Position This function is to adjust picture to

left/right and up/down as you prefer.

In HDMI/DVI-PC mode,

is not available.

Size

-30 +30

The

adjustment range is

Size

In HDMI/DVI-PC mode,

is not available.

Size

This function is to minimize any ver-

tical bars or stripes visible on the

screen background. And the hori-

zontal screen size will also change.

ENTER

Press the

button.

Phase

This function allows you to

remove any horizontal noise and

clear or sharpen the image of char-

acters.

Initializing (Reset to original factory values)

To initialize the adjusted values

Resolution

ADJUST

Press the

select

button and then use _Dor _Ebutton to

Position

Size

Reset

Initialize Settings

Phase

Reset

ENTER

Press the

Yes

select

button and then use or button to

Yes

Move

ENTER

Press the

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING TV / CHANNEL CONTROL

REMOTE CONTROL FUNCTIONS

When using the remote control, aim it at the remote control sensor on the TV.

Analog mode: Selects MTS sound (Mono, Stereo, or a

p.49

SAP

POWER

SAP) _G

DTV mode: Changes the audio language.

SAP

INPUT

PICTURE

SOUND TIMER

Selects the factory preset picture depend on the viewing

p.39

environment. _G

PICTURE

SOUND

Selects the factory preset sound for type of program.

_Gp.46

Select the amount of time before your TV turns off auto-

p.58

matically. _G

TIMER

FAV

Increase/decrease the sound level.

VOLUME UP

/DOWN

BACK

MUTE

BACK Tune to the last channel viewed.

VOL

p.30

MUTE Switch the sound on or off. _G

p.52

Select a closed caption. _G

(*In DTV/CADTV mode _G

ADJUST

EXIT

p.53

)

CHANNEL Select available channels.

UP/DOWN

Displays the main menu.

ENTER

p.27

ADJUST Adjust the screen resolution, position, size and phase. _G

EXIT Clear all on-screen displays and return to TV viewing

from any menu.

THUMBSTICK Navigate the on-screen menus and adjust the system set-

(Up/Down/Left

tings to your preference.

Right/ENTER)

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER Turns your TV or any other programmed equipment on or off, depending on the mode.

TV In AV, Component, RGB-PC, and HDMI/DVI input sources, screen returns to the last TV channel.

INPUT External input modes rotate in regular sequence: TV, AV, Component, RGB-PC, and HDMI/DVI.

(AV, Component, RGB-PC, and HDMI/DVI input sources are linked automatically, only if a

device is connected.)

NUMBER button

— (DASH) Used to enter a program number for multiple program channels such as 2-1, 2-2, etc.

FAV

Scroll through the programmed Favorite channels. _G

p.34

Installing Batteries

Remote control effective range

POWER

SAP

INPUT

PICTURE

FAV

Open the battery compartment cover on the back

side and install the batteries matching correct

Use a remote control up to 7 meters distance

and 30 degree (left/right) within the receiving

unit scope.

(

polarity + with +, - with - .

)

Install two 1.5V AAA batteries. Don’t mix old or

used batteries with new ones.

Dispose of used batteries in a recycle bin to

preserve environment.

Close cover.

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING TV / CHANNEL CONTROL

TURNING ON TV

POWER

INPUT

PICTURE SOUND TIMER

SAP

First, connect power cord correctly.

At this moment, the TV switches to standby mode.

INPUT CH (

+ or -

)

In standby mode to turn TV on, press the

POWER TV INPUT CH (

+ or - ,

)

button on the TV or press the

Number (0 9)

button on the remote control.

FAV

TV INPUT

button on the remote

Select the viewing source by using the

control.

BACK

MUTE

VOL

This TV is programmed to remember which power state it was last set

to, even if the power cord is out.

ADJUST

EXIT

POWER

When finished using the TV, press the

control. The TV reverts to standby mode.

button on the remote

NOTE

G If you intend to be away on vacation, disconnect the power plug from the wall power outlet.

CHANNEL SELECTION

NUMBER

buttons to select a channel number.

Press the

+ - or

FAV

BACK

MUTE

VOL

VOLUME ADJUSTMENT

Adjust the volume to suit your personal preference.

FAV

BACK

MUTE

VOL

Press the

+ or - button to adjust the volume.

VOL

MUTE

If you want to switch the sound off, press the

button.

ADJUST

EXIT

MUTE VOL

You can cancel the Mute function by pressing the

button.

+ or -

Download from Www.Somanuals.com. All Manuals Search And Download.

ON-SCREEN MENUS SELECTION

(

Your TV's OSD On Screen Display may differ slightly from what is shown in this manual.

)

button and then use _Dor _Ebutton to select the each menu.

Press the

Press the _Gbutton and then use _{D E F G}button to display the available menus.

VIDEO

SETUP

EZ Scan

EZ Picture

Color Temperature

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

Advanced

Video Reset

AUDIO

LOCK

For Canada

For USA

Lock System

Audio Language

EZ Sound

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

Balance

TIME

OPTION

Aspect Ratio

Caption/Text

Caption Option

Language

Auto Clock

Manual Clock

Off Timer

On Timer

Sleep Timer

Auto Off

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING TV / CHANNEL CONTROL

CHANNEL SETUP

ADJUST

EXIT

Auto Scan (EZ Scan)

ENTER

Automatically finds all channels available through antenna

or cable inputs, and stores them in memory on the channel

list.

Run EZ Scan again after any Antenna/Cable connection

changes.

A password is required to gain access to EZ Scan menu if

the Lock System is turned on.

EZ Scan

SETUP

to select the

Press the

button and then use _Dor _Ebutton

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

menu.

Press the _Gbutton and then use _Dor _Ebutton to

EZ Scan

select

ENTER

Press the

EZ Scan

Allow

for

button to begin the channel search.

to complete the channel search cycle

CABLE

Selection ( or

)

EZ Scan

leads you to the EZ

scan screen.

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

ANTENNA

and

EZ Scan

Selection ( or

leads you to the EZ

scan screen.

)

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

Processing EZ scan...

TV Ch.20

0 channel(s) found

Press

to stop the

current scan and start

DIGITAL ANTENNA channel

scan.

MENU Previous

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUST

EXIT

Add/Delete Channel (Manual Scan)

ENTER

A password is required to gain access to Manual Scan

menu if the Lock System is turned on.

EZ Scan

SETUP

to select the

Press the

button and then use _Dor _Ebutton

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

menu.

Press the _Gbutton and then use _Dor _Ebutton to

Manual Scan

select

Press the _Gbutton and then use _Dor _Ebutton to

TV DTV CATV CADTV

select

, and

EZ Scan

Select channel type and

RF-channel number.

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

Press the _Gbutton and then use _Dor _Ebutton to

select channel you want to add or delete.

ENTER

Press the

button to add or delete the channel.

EXIT

button to return to the previous menu.

Press the

button to return to TV viewing or press

EZ Scan

Select channel type and

RF-channel number.

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

TV 2-0

Press

to delete the channel.

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING TV / CHANNEL CONTROL

FAV

BACK

MUTE

Channel Editing

VOL

There are two different ways in order to add or delete

scanned channels. One is "Custom List" and the other is

"Favorite List" in the channel list. Both of them are available

after EZ Scan on the SETUP menu.

ADJUST

EXIT

A Custom List can be created by toggling each channel on

or off with ENTER button. The channels in the Custom List

are displayed in black, and the channels deleted from the

Custom List are displayed in gray. Once a channel is high-

lighted you can add or delete the channel by referring to the

small window at the top-left corner of the screen.

ENTER

FAV

You can create your own Favorite List. Use the

button

EZ Scan

on the remote control when a channel is highlighted and

then add or delete the channel to/from your Favorite List.

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

SETUP

to select the

Press the

button and then use _Dor _Ebutton

menu.

EZ Scan

Press the _Gbutton and then use _Dor _Ebutton to

Channel Edit

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

select

Selection ( or

you to the channel edit

screen.

) leads

Press the _Gbutton. You will now see a screen filled

with channel numbers and a preview picture.

Use _{D E F G}button to select a channel and then

ENTER

use the

button to add or delete it.

FAV

Press

button to add the channel to the Favorite List.

The heart-mark will appear in front of that channel

number.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

DTV SIGNAL STRENGTH

ADJUST

EXIT

This feature displays the DTV signal levels being received

and indicates whether you need to adjust your antenna or

digital cable input. The higher the signal strength, the less

likely you are to experience picture degradation.

ENTER

DTV Signal: This function is only available when the input

signal is DTV or CADTV.

EZ Scan

SETUP

to select the

Press the

button and then use _Dor _Ebutton

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

menu.

Press the _Gbutton and then use _Dor _Ebutton to

DTV Signal.

select

View the on-screen signal strength monitor to see

the quality of the signal being received.

EZ Scan

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

Bad

Normal

Good

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

WATCHING TV / CHANNEL CONTROL

INPUT SOURCE SELECTION

ADJUST

EXIT

Changes the picture source so you can watch your off-air

TV, cable TV, VCR, DVD, or any other devices that are

connected to your TV.

ENTER

EZ Scan

SETUP

to select the

Press the

button and then use _Dor _Ebutton

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

menu.

Press the

Input Source.

select

button and then use

button to

Press the

button and then use

EZ Scan

TV AV Component RGB-PC

select the source:

HDMI/DVI

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Component

RGB-PC

HDMI/DVI

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE CONTROL

PICTURE SIZE (ASPECT RATIO) CONTROL

ADJUST

EXIT

This feature allows an analog picture with a 4:3 aspect ratio is displayed on your TV.

When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you

need to specify how the picture is to be displayed.

ENTER

ꢀ

RGB-PC input source use 4:3 or 16:9 aspect ratio.

NOTE

_GIf a fixed image is displayed on the screen for a long time, the image may

become imprinted on the screen and remain visible.

This phenomenon is common to all manufactures and in consequence the

manufactures warranty does not cover the product bearing this phenomenon.

Aspect Ratio

Caption/Text

OPTION

to select the

Press the

button and then use _Dor _Ebutton

menu.

Caption Option

Language

Press the

Aspect Ratio

select

button and then use

button to

Press the button and then use

select the desired picture option

Set By Program

button to

(

Aspect Ratio

Caption/Text

Caption Option

Language

)

Zoom

4:3 16:9 Horizon

, or

Set By Program

4:3

16:9

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Horizon

Zoom

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE CONTROL

Set by program

Selects the proper picture proportion to match

the source’s image.

Horizon

The screen size is, more enlarged at both sides,

to create a spectacular view.

(4:3 4:3)

Horizon

Set By Program

Zoom

(16:9 16:9)

Choose Zoom when you want to view the pic-

ture without any alteration. However, the top

and bottom portions of the picture will be

cropped.

Set By Program

4:3

Choose 4:3 when you want to view a picture

with an original 4:3 aspect ratio.

Zoom

4:3

16:9

Adjust the picture horizontally, in a linear pro-

portion to fill the entire screen.

16:9

Download from Www.Somanuals.com. All Manuals Search And Download.

PRESET PICTURE SETTINGS

POWER

INPUT

PICTURE SOUND TIMER

SAP

EZ Picture - Preset

EZ Picture adjusts the TV for the best picture appearance. Select

the preset value in the EZ Picture menu based on the program

category.

Daylight Normal Night Time

Settings are preset for the

optimum picture quality at the factory and are not adjustable.

User1 User2

FAV

In the

and

modes only, user can directly adjust

BACK

MUTE

the contrast, brightness, color, sharpness, tint.

VOL

PICTURE

appearance setup option as below :

Press the

button repeatedly to select the picture

Daylight Normal Night Time User1

, ,

(your own settings).

User2

, and

EXIT

Press the

button to save and return to TV viewing.

ꢀ

VIDEO

EZ Picture

You can also use the

menu to adjust

Daylight

Normal

Night Time

User1

EZ Picture

Color Temperature

Advanced

Video Reset

Advanced

Video Reset

User2

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE CONTROL

MUTE

VOL

ADJUST

EXIT

Color Tone - Preset

Choose one of three automatic color adjustments. Set to

warm to enhance hotter colors such as red, or set to cool

to see less intense colors with more blue.

ENTER

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

Color Temperature

select

button and then use

button to

Press the

select either

button and then use

Cool Medium Warm

User

EZ Picture

Color Temperature

Cool

Medium

Warm

User

Advanced

Video Reset

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

MANUAL PICTURE ADJUSTMENT

ADJUST

EXIT

EZ Picture - User Mode

Adjust the picture appearance to suit your preference and

viewing situations.

ENTER

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

EZ Picture

select

button and then use

button to

EZ Picture

Color Temperature

Daylight

Normal

Night Time

User 1

Press the

select

button and then use

User 1 User 2

Advanced

Video Reset

User 2

Selection ( or

) leads you

Press the

button and then use

to the detailed setting

screen.

(

Contrast

select the desired picture option

Brightness Color Sharpness Tint

)

, or

Press the button and then use

make appropriate adjustments.

button to

User1

Contrast

Brightness

Color

Sharpness

Tint

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Press

to confirm.

Contrast

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE CONTROL

MUTE

VOL

ADJUST

EXIT

Color Tone - User Mode

You can also adjust the detailed settings (Red, Green, Blue)

Color Temperature-User

ENTER

by selecting the

menu.

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

Color Temperature

select

button and then use

button to

Press the

User

select

button and then use

EZ Picture

Color Temperature

Cool

Medium

Warm

User

Advanced

Video Reset

Press the

Red Green

select

button and then use

Selection ( or

) leads you

Blue

, or

to the detailed setting

screen.

Press the button and then use

make appropriate adjustments.

User

Red

Green

Blue

ꢀ

Red Green

Blue

is -

The adjustment range of

20~ +20.

, or

Press

to confirm.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Red

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

XD - PICTURE IMPROVEMENT TECHNOLOGY

ADJUST

EXIT

XD is LG Electronic’s unique picture improving technology

to display a real HD source through an advanced digital sig-

nal processing algorithm.

ENTER

When selecting EZ Picture options (Daylight, Normal and

Night time), XD is automatically changed to Auto.

When selecting EZ Picture options (User 1 and User 2), you

can choose the Auto / Manual.

When selecting the Manual, you can adjust the XD

Contrast, XD color and XD Noise.

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

select

button and then use

button to

Press the

Auto

select

button and then use

Manual

Selecting the Manual

1. Press the _Gbutton and then use _For _Gbut-

XD Contrast XD Color

EZ Picture

Color Temperature

ton to select

Manual

XD Noise

Advanced

Video Reset

ꢀ

XD Contrast:

Optimizing the contrast

automatically according to the brightness of

the reflection.

XD Contrast

XD Color

XD Noise

ꢀ

XD Color:

Adjusting the colors of the

reflection automatically to reproduce as

closely as possible to the natural colors.

ꢀ

XD Noise :

Removing the noise up to the

point where it does not damage the original

picture.

On Off

2. Use the _Dor _Ebutton to select

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE CONTROL

MUTE

VOL

ADVANCED - BLACK (DARKNESS) LEVEL

ADJUST

EXIT

Adjusting the contrast and the brightness of the screen

using the black level of the screen.

This feature operates only in AV or HDMI/DVI.

ENTER

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

Advanced

select

button and then use

button to

Press the

Black level

select

button and then use

EZ Picture

Color Temperature

Black Level

Low

Advanced

Video Reset

Press the

select

button and then use

Low High

ꢀ

Low

The screen gets darker.

High

ꢀ

The screen gets brighter.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

PICTURE RESET

ADJUST

EXIT

Use to quickly reset all the Video menu options to their

original factory preset values.

ENTER

EZ Picture

VIDEO

to select the

Press the

button and then use _Dor _Ebutton

Color Temperature

menu.

Advanced

Video Reset

Press the

Video Reset

select

button and then use

button to

Press the _Gbutton to reset the Video menu options to

original values.

EZ Picture

Color Temperature

Advanced

Video Reset

Selection ( or

the factory settings (default).

) resets to

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND & LANGUAGE CONTROL

PRESET SOUND SETTINGS (EZ SOUND)

POWER

INPUT

PICTURE SOUND TIMER

SAP

EZ Sound lets you enjoy the best sound without any special

adjustment because the TV sets the appropriate sound options

based on the program content.

Normal, Stadium, News, Music and Theater are preset for good

sound quality at the factory and are not adjustable.

When you select the Stadium or Theater, the AUDIO menu-

Balance option is disabled and the Balance option is set to 0

automatically.

FAV

BACK

MUTE

VOL

SOUND

ate sound setup as below :

Press the

button repeatedly to select the appropri-

Normal Stadium News Music Theater

User

, and

(your own settings).

EXIT

Press

button to return to TV viewing.

ꢀ

EZ Sound

AUDIO

menu.

You can also adjust

in the

Audio Language

EZ Sound

Audio Language

EZ Sound

Normal

Stadium

News

Balance

Music

Theater

User

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

SOUND SETTING ADJUSTMENT - USER MODE

ADJUST

EXIT

Adjust the sound to suit your taste and room situations.

ENTER

Audio Language

EZ Sound

Balance

AUDIO

to select the

Press the

button and then use _Dor _Ebutton

menu.

Press the

EZ Sound

select

button and then use

button to

Audio Language

EZ Sound

Normal

Stadium

News

Balance

Press the

User

select

button and then use

Music

Theater

User

Selection ( or

) leads you

to the detailed setting

screen.

Press the button and then use

select the desired sound option (

Treble

Bass

User

Treble

Bass

Press the button and then use

make appropriate adjustments.

button to

EXIT

Press

button to return to TV viewing or press

button to return to the previous menu.

Press

to confirm.

Treble

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND &LANGUAGE CONTROL

BALANCE

MUTE

VOL

ADJUST

EXIT

Adjust the left/right sound of speaker to suit your taste and

room situations.

ENTER

Audio Language

EZ Sound

AUDIO

to select the

Press the

button and then use _Dor _Ebutton

Balance

menu.

Press the _Gbutton and then use _Dor _Ebutton to

Balance

select

Press the _Gbutton and then use _For _Gbutton to

make appropriate adjustments.

Audio Language

EZ Sound

Balance

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Balance

Download from Www.Somanuals.com. All Manuals Search And Download.

STEREO/SAP BROADCASTS SETUP

POWER

INPUT

PICTURE SOUND TIMER

SAP

This TV can receive MTS stereo programs and any SAP

(

)

Secondary Audio Program that accompanies the stereo pro-

gram if the station transmits an additional sound signal as well

as the original one and when you select Stereo or SAP on the

remote control.

Mono sound is automatically received if the broadcast is only in

Mono; even though Stereo or SAP has been selected.

FAV

Select Mono if you want to listen to the mono sound in remote

areas during stereo/SAP broadcasting.

BACK

MUTE

Stereo or SAP can be received in Analog channel.

VOL

SAP

analog signal. Each time you press the

Use the

button to select your desired MTS mode in

SAP Mono

button,

Stereo

SAP

appear in turn.

, or

ꢀ

If other languages available on the digital signal, select

SAP

them with the

button.

EXIT

Press

button to save and return to TV viewing.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND &LANGUAGE CONTROL

AUDIO LANGUAGE

MUTE

VOL

ADJUST

EXIT

Other languages may be available if a digital signal is pro-

vided by the broadcasting station.

This feature operates only in DTV/CADTV mode.

ENTER

Audio Language

EZ Sound

AUDIO

to select the

Press the

button and then use _Dor _Ebutton

Balance

menu.

Press the _Gbutton and then use _Dor _Ebutton to

Audio Language

select

Press the _Gbutton and then use _Dor _Ebutton to

English Spanish

Audio Language

EZ Sound

English

Spanish

French

select :

, or

Balance

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

ON-SCREEN MENUS LANGUAGE SELECTION

ADJUST

EXIT

The menus can be shown on the screen in the selected lan-

guage. First select your language.

ENTER

Aspect Ratio

Caption/Text

OPTION

to select the

Press the

button and then use _Dor _Ebutton

Caption Option

Language

menu.

Press the G button and then use _Dor _Ebutton to

select

Language.

Press the G button and then use _Dor _Ebutton to

select your desired language.

Aspect Ratio

Caption/Text

Caption Option

Language

From this point on, the on-screen menus will be shown

in the selected language.

English

Español (Spanish)

Français (French)

EXIT

to return to the previous menu.

Press the

press

button to return to TV viewing or

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND &LANGUAGE CONTROL

MUTE

VOL

CAPTION / TEXT

ADJUST

EXIT

Analog Broadcasting System Captions

Select a caption mode for displaying captioning information if

provided on a program. Analog caption displays information at

any position on the screen and is usually the program's dialog.

ENTER

Text displays information, usually at the bottom position and is

used for a data service, generally not program related.

Caption/Text, if provided by the broadcaster, would be available

for both digital and analog channels on the Antenna/Cable.

This TV is programmed to memorize the caption/text mode which

was last set when you turn the power off.

When you select the CC1 ~ Text4, Caption option must be disabled.

Off CC1

Use the

CC2 CC3 CC4 Text1 Text2 Text3 Text4

button repeatedly to select Caption

ꢀ

CAPTION

The term for the words that scroll across the bottom of the

TV screen; usually the audio portion of the program provided

for the hearing impaired.

ꢀ

TEXT

The term for the words that appear in a large black frame

and almost cover the entire screen; usually messages pro-

vided by the broadcaster.

EXIT

Press

to save and return to TV viewing.

ꢀ

OPTION

Caption Text

You can also use the

menu to select

Aspect Ratio

Caption/Text

Caption Option

Language

Aspect Ratio

Caption/Text

Caption Option

Language

Off

CC1

CC2

CC3

CC4

Text1

Text2

Text3

Text4

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

ADJUST

EXIT

Digital Broadcasting System Captions

Choose the language you want the DTV/CADTV Captions

to appear in.

ENTER

Other Languages can be chosen for digital sources only if

they are included on the program.

Aspect Ratio

Caption/Text

OPTION

to select the

Press the

button and then use _Dor _Ebutton

menu.

Caption Option

Language

Press the _Gbutton and then use _Dor _Ebutton to

Caption Text

select

Press the _Gbutton and then use _Dor _Ebutton to

English Spanish

Aspect Ratio

Caption/Text

Caption Option

Language

select available caption languages :

French

Off

English

Spanish

French

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND &LANGUAGE CONTROL

CAPTION OPTION

MUTE

VOL

ADJUST

EXIT

Customize the DTV/CADTV captions that appear on your

screen.

ENTER

Aspect Ratio

Caption/Text

OPTION

to select the

Press the

button and then use _Dor _Ebutton

Caption Option

Language

menu.

Press the _Gbutton and then use _Dor _Ebutton to

Caption Option

select

Press the _Gbutton and then use _For _Gbutton to

Custom

select

Aspect Ratio

Caption/Text

Caption Option

Language

Style

Custom

A Standard

Size

Font

Text Color

Text Opacity

Bg Color

Bg Opacity

Edge Type

Edge Color

White

Style Font

Use _Dor _Ebutton to customize the

etc., to your preference.

Solid

Black

Solid

None

Black

A preview icon is provided at the bottom of the

screen, use it to see the caption language.

Size

Font

: Set the word size.

: Select a typeface for the text.

Text Color

Text Opacity

: Choose a color for the text.

: Specify the opacity for the text color.

(

)

Bg Background Color

: Select a background color.

Bg Background Opacity

: Select the opacity for

(

)

the background color.

Edge Type

Edge Color

: Select an edge type.

: Select a color for the edges.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

TIME SETTING

MUTE

VOL

CLOCK SETTING

ADJUST

EXIT

Auto Clock Setup

The time is set automatically from a digital channel signal.

ENTER

The digital channel signal includes information for the

current time provided by the broadcasting station.

Set the clock manually if the current time is set incorrectly

by the auto clock function.

The factory default value of the Auto Clock is Off, because

a clock information sent each broadcasting station is different.

TIME

to select the

Press the

button and then use _Dor _Ebutton

menu.

Auto Clock

Manual Clock

Off Timer

On Timer

Press the

Auto Clock

select

button and then use

button to

Sleep Timer

Auto Off

Press the

select

button and then use

Press the button and then use

select your viewing area time zone:

Auto Clock

Manual Clock

Off Timer

Off

Eastern Central Mountain Pacific

U.S.A :

Time Zone

Eastern

Auto

On Timer

Alaska Hawaii

Daylight

Saving

Sleep Timer

Auto Off

Eastern Central Mountain Pacific

Canada :

New F.land Atlantic

Press the

button and then use

button to

Auto Off On

, depending on whether or not

select

your viewing area observes Daylight Saving time.

EXIT

Press

button to return to the previous menu.

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

TIME SETTING

MUTE

VOL

ADJUST

EXIT

Manual Clock Setup

If the current time setting is wrong, reset the clock manually.

ENTER

Auto Clock

Manual Clock

Off Timer

TIME

to select the

Press the

button and then use _Dor _Ebutton

menu.

On Timer

Sleep Timer

Auto Off

Press the

Manual Clock

select

button and then use

button to

Press the

button and then use

select either the year, date, or time option. Once

selected, use the

and time options.

Auto Clock

Manual Clock

Off Timer

or _Ebutton to set the year, date,

Year

- - - -

Date - -

Time - -

- -

- - - -

On Timer

Sleep Timer

Auto Off

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

AUTO ON/OFF TIMER SETTING

ADJUST

EXIT

The timer function operates only if the current time has

been set.

The Off-Timer function overrides the On-Timer function if

they are both set to the same time.

ENTER

The TV must be in standby mode for the On-Timer to work.

If you do not press any button within 2 hours after the TV

turns on with the On Timer function, the TV will automati-

cally revert to standby mode.

TIME

to select the

Press the

button and then use _Dor _Ebutton

menu.

Auto Clock

Manual Clock

Off Timer

Press the

select

button and then use

button to

On Timer

Off Timer On Timer

Sleep Timer

Auto Off

Press the

select

button and then use

button to

ꢀ

On/Off timer

Off

To cancel the

function, select

Auto Clock

Manual Clock

Off Timer

Press the _Gbutton and then use _Dor _Ebutton to set

the hour.

Off

On Timer

Sleep Timer

Auto Off

Time

Ch.

30 AM

TV 2-0

Press the _Gbutton and then use _Dor _Ebutton to set

the minutes.

Vol

Only On timer

Press the button and then use

select the channel at turn-on.

button to

Press the _Gbutton and then use _Dor _Ebutton to set

the sound level at turn-on.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

TIME SETTING

SLEEP TIMER SETTING

POWER

INPUT

PICTURE SOUND TIMER

The Sleep Timer turns the TV off at the preset time.

SAP

Note that this setting is cleared when the TV is turned off.

FAV

BACK

MUTE

VOL

TIMER

minutes. First the

by the following sleep timer options : 10, 20, 30, 60, 90,

120, 180, and 240 minutes.

Press the

button repeatedly to select the number of

Off

option appears on the screen, followed

When the number of minutes you want is displayed on the

ENTER

down from the number of minutes selected.

screen, press the

button. The timer begins to count

To check the remaining minutes before the TV turns off, press

TIMER

the

button once.

TIMER

To cancel the Sleep Timer, press the

Off

button repeat-

edly to select

ꢀ

Sleep Timer

TIME

menu.

You can also set up the

in the

Auto Clock

Manual Clock

Off Timer

Off

Auto Clock

Manual Clock

Off Timer

10 min

20 min

30 min

60 min

90 min

120 min

180 min

240 min

On Timer

Sleep Timer

Auto Off

Sleep Timer

Auto Off

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

AUTO SHUT-OFF SETTING

ADJUST

EXIT

If set to on and there is no input signal, the TV turns off

automatically after 10 minutes.

ENTER

Auto Clock

Manual Clock

Off Timer

TIME

to select the

Press the

button and then use _Dor _Ebutton

menu.

On Timer

Sleep Timer

Auto Off

Press the _Gbutton and then use _Dor _Ebutton to

Auto Off

select

Press the _Gbutton and then use _Dor _Ebutton to

On Off

select

Auto Clock

Manual Clock

Off Timer

TV will be automatically

turned off, in case of No

Signal for 10 minutes.

On Timer

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Sleep Timer

Auto Off

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL CONTROL / RATINGS

Parental Control can be used to block specific channels, ratings and other viewing sources.

The Parental Control Function (V-Chip) is used to block program viewing based on the ratings

sent by the broadcasting station. The default setting is to allow all programs to be viewed.

Viewing can be blocked by choosing the type of the program and the categories. It is also possi-

ble to block all program viewing for a time period. To use this function, the following must be

done :

1. Set ratings and categories to be blocked.

2. Specify a password

3. Enable the lock

V-Chip rating and categories

Rating guidelines are provided by broadcasting stations. Most television programs and television

movies can be blocked by TV Rating and/or Individual Categories. Movies that have been shown

(

at the theaters or direct-to-video movies use the Movie Rating System MPAA only.

)

Ratings for Television programs including made-for-TV movies :

ꢀ

(

TV-G General audience

)

ꢀ

(

TV-MA Mature audience only

)

(

TV-PG Parental guidance suggested

)

( )

All children

TV-Y

)

TV-Y7 Children 7 years older

(

TV-14 Parents strongly cautioned

)

(

SET PASSWORD & LOCK SYSTEM

Setting up Your Password

MUTE

VOL

Set up blocking schemes to block specific channels, ratings, and

external viewing sources.

ADJUST

EXIT

A password is required to gain access to this menu.

ENTER

LOCK

to select the

Press the

button and then use the _Dor _Ebutton

menu. Then, press the _Gbutton.

Enter Password

ꢀ

Enter the password as requested.

The TV is set up with the initial

password “0-0-0-0”.

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Password

Change the password by inputting a new password twice.

For USA

For Canada

Lock System

After inputting the password, use the _Dor _Ebutton

Set password

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

to choose

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Press the _Gbutton and then choose any 4 digits for

your new password.

As soon as the 4 digits are entered, re-enter the same

Confirm

4 digits on the

Then your changed password has been memorized.

EXIT

to return to TV viewing or press

Press

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

to return to the previous menu.

New

Confirm

NOTE

G If you ever forget your password, key in ‘7’, ‘7’, ‘7’, ‘7’

on the remote control.

Lock System

For USA

For Canada

Enables or disables the blocking scheme you set up previously.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

After inputting the password, use the _Dor _Ebutton

Lock System

to choose

Press the _Gbutton and then use the _Dor _Ebutton

On Off

to select

ꢀ

When you select

, the Lock System is enable.

Lock System

Off

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL CONTROL /RATINGS

CHANNEL BLOCKING

Blocks any channels that you do not want to watch or that

you do not want your children to watch.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Selection ( or

) leads you

to the block channel screen.

After inputting the password, use the

Block Channel

or _Ebutton

to choose

Press the _Gbutton. You will now see a screen filled

with channel numbers and a preview picture.

Use _{D E F G}button to select a channel and then

ENTER

use the

button to block or unblock it.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

EXTERNAL INPUT BLOCKING

For USA

For Canada

Enables you to select a source to block from the external

source devices you have hooked up.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

After inputting the password, use the _Dor _Ebutton

Input Block

to choose

Press the _Gbutton and then use the _For _Gbutton

to select a source.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

Press the _Gbutton and then use the _Dor _Ebutton

On Off

to select

on the each source.

Off

Component

RGB-PC

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

HDMI/DVI

Download from Www.Somanuals.com. All Manuals Search And Download.

MUTE

VOL

MOVIE & TV RATING

ADJUST

EXIT

Movie Rating (MPAA) - for USA only

Blocks movies according to the movie ratings limits speci-

fied, so children cannot view certain movies. You can set

the ratings limit by blocking out all the movies with the

ratings above a specified level. Keep in mind that the

movie ratings limit only applies to movies shown on TV,

not TV programs, such as soap operas.

ENTER

Lock System

Set Password

Block Channel

Movie Rating

After inputting the password, use the _Dor _Ebutton

Movie Rating

to choose

TV Rating-Children

TV Rating-General

Input Block

Press the _Gbutton and then use the

G PG PG-13 R NC-17

, ,

or _Ebutton

to select

ꢀ

G (General audience)

ꢀ

PG (Parental guidance suggested)

PG-13 (Parents strongly cautioned)

R (Restricted)

Lock System

Blocking off : permits all

programs

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

ꢀ

PG-13

NC-17

ꢀ

NC-17 (No one 17 and under admitted)

X (Adult only)

Blocking Off (Permits all programs)

Blocking Off

G If you set PG-13 : G and PG movies will be available,

PG-13, R, NC-17 and X will be blocked.

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL CONTROL /RATINGS

TV Rating Children - for USA only

Prevents children from watching certain children's TV programs, according to

the ratings limit set. The children rating does not apply to other TV programs.

Unless you block certain TV programs intended for mature audiences in the TV

Rating - sub menu, your children can view those programs.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

After inputting the password, use the _Dor _Ebutton to

TV Rating-Children

choose

Press the _Gbutton and then use the _Dor _Ebutton to

Age Fantasy Violence

select

, or

Press the _Gbutton and then use the _Dor _Ebutton to

select block options.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

ꢀ

Age(applies to TV-Y, TV-Y7)

ꢀ

Fantasy Violence(applies to TV-Y7)

Age

Fantasy Violence

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

TV Rating General - for USA only

Based on the ratings, blocks certain TV programs that you

and your family do not want to view.

Lock System

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

After inputting the password, use the _Dor _Ebutton to

TV Rating-General

choose

Press the _Gbutton and then use the _Dor _Ebutton to

Age Dialogue Language Sex Violence

select

Press the _Gbutton and then use the _Dor _Ebutton to

select block options.

ꢀ

Age(applies to TV-G,TV-PG,TV-14,TV-MA)

Lock System

ꢀ

Dialogue-sexual dialogue (applies to TV-PG,TV-14)

Set Password

Block Channel

Movie Rating

TV Rating-Children

TV Rating-General

Input Block

ꢀ

Language-adult language (applies to TV-PG,TV-14,TV-MA)

ꢀ

Sex-sexual situations (applies to TV-PG,TV-14,TV-MA)

Age

ꢀ

Violence (applies to TV-PG,TV-14,TV-MA)

Dialogue

Language

Sex

Violence

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Rating English - for CANADA only

Selecting canadian english language rating system.

Lock System

After inputting the password, use the _Dor _Ebutton to

TV Rating-English

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

choose

Press the _Gbutton and then use the _Dor _Ebutton to

E C C8+ G PG 14+ 18+

Blocking Off

select ,

, or

ꢀ

E (Exempt)

ꢀ

C (Children)

C8+ (Children eight years and older)

G (General programming, suitable for all audiences)

PG (Parental Guidance )

Lock System

Blocking off : permits all

programs

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

14+ (Viewers 14 years and older)

18+ (Adult programming)

C8+

14+

18+

Blocking Off (Permits all programs)

EXIT

Press

button to return to the previous menu.

button to return to TV viewing or press

Blocking Off

TV Rating French - for CANADA only

Selecting canadian french language rating system.

Lock System

After inputting the password, use the _Dor _Ebutton

TV Rating-French

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

to choose

Press the _Gbutton and then use the _Dor _Ebutton

E G 8ans+ 13ans+ 16ans+ 18ans+

to select ,

Blocking off

ꢀ

E(Exempt)

G(General)

ꢀ

8ans+ (General-Not convenient for little children)

Lock System

Blocking off : permits all

programs

13ans+ (Not convenient for children of 13 years

and younger)

Set Password

Block Channel

TV Rating-English

TV Rating-French

Input Block

ꢀ

16ans+ (Not convenient for children of 16 years

and younger)

8 ans+

13 ans+

16 ans+

ꢀ

18ans+ (This programs is only for adults)

Blocking off (Permits all programs)

18 ans+

Blocking Off

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

TROUBLESHOOTING

The operation does not work normally.

ꢀ

Check to see if there is any object between the product and the remote control

causing obstruction. Ensure you are pointing the remote control directly at the TV.

Ensure that the batteries are installed with correct polarity (+ to +, - to -).

Ensure that the correct remote operating mode is set: TV, VCR etc.

Install new batteries.

The remote control

doesn’t work

ꢀ

Is the sleep timer set?

Power is suddenly

turned off

Check the power control settings. Power interrupted.

No broadcast on station tuned with Auto off activated.

The video function does not work.

ꢀ

Check whether the product is turned on.

ꢀ

Try another channel. The problem may be with the broadcast.

Is the power cord inserted into wall power outlet?

Check your antenna direction and/or location.

No picture &No sound

Test the wall power outlet, plug another product’s power cord into the outlet

where the product’s power cord was plugged in.

ꢀ

Picture appears slowly

after switching on

This is normal, the image is muted during the product startup process. Please

contact your service center, if the picture has not appeared after five minutes.

ꢀ

Adjust Color in menu option.

Keep a sufficient distance between the product and the VCR.

Try another channel. The problem may be with the broadcast.

Are the video cables installed properly?

No or poor color

or poor picture

Activate any function to restore the brightness of the picture.

Horizontal/vertical bars

or picture shaking

ꢀ

Check for local interference such as an electrical appliance or power tool.

ꢀ

Station or cable product experiencing problems, tune to another station.

Station signal is weak, reorient antenna to receive weaker station.

Check for sources of possible interference.

Poor reception on

some channels

Lines or streaks

in pictures

ꢀ

Check antenna (Change the direction of the antenna).

Download from Www.Somanuals.com. All Manuals Search And Download.

The audio function does not work.

ꢀ

Press the VOL or VOLUME button.

ꢀ

Sound muted? Press MUTE button.

Picture OK & No sound

Try another channel. The problem may be with the broadcast.

Are the audio cables installed properly?

No output from one

of the speakers

ꢀ

Adjust Balance in menu option.

A change in ambient humidity or temperature may result in an unusual noise

when the product is turned on or off and does not indicate a fault with the

product.

Unusual sound from

inside the product

There is a problem in PC mode. (Only PC mode applied)

ꢀ

Adjust resolution, horizontal frequency, or vertical frequency.

The signal is out of range

ꢀ

Check the input source.

Vertical bar or stripe on

background &

Horizontal Noise &

Incorrect position

ꢀ

Work the Auto configure or adjust clock, phase, or H/V position. (Option)

ꢀ

Check the signal cable.

Screen color is unstable

or single color

Reinstall the PC video card.

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

MAINTENANCE

Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can

enjoy your new TV.

Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning.

Cleaning the Screen

Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm

water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then

use it to wipe the screen.

Make sure the excess water is off the screen, and then let it air-dry before you turn on your TV.

Cleaning the Cabinet

ꢀ

To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.

ꢀ

Please be sure not to use a wet cloth.

Extended Absence

CAUTION

If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug

the power cord to protect against possible damage from lightning or power surges.

Download from Www.Somanuals.com. All Manuals Search And Download.

PRODUCT SPECIFICATIONS

The specifications shown above may be changed without prior notice for quality improvement.

20LS7D (20LS7D-UB)

20LS7DC (20LS7DC-UB)

23LS7D (23LS7D-UB)

23LS7DC (23LS7DC-UB)

MODELS

19.7 x 15.8 x 6.9 inches

499.4 x 401.2 x 175.1 mm

19.7 x 14.0 x 2.9 inches

499.4 x 355.0 x 72.9 mm

22.9 x 18.1 x 7.8 inches

581.3 x 458.9 x 198.8 mm

22.9 x 16.3 x 3.3 inches

581.3 x 412.9 x 83.9 mm

Including stand

Excluding stand

Dimensions

(Width x Height x Depth)

14.1 pounds / 6.4 kg

13.2 pounds / 6.0 kg

17.9 pounds / 8.1 kg

16.1 pounds / 7.3 kg

Weight

including stand

excluding stand

AC100-240V ~ 50/60Hz

Power requirement

NTSC-M, ATSC, 64 & 256 QAM

VHF 2-13, UHF 14-69, CATV 1-135, DTV 2-69, CADTV 1-135

75 ohm

Television System

Program Coverage

External Antenna Impedance

32 ~ 104°F (0 ~ 40°C)

Operating Temperature

Operating Humidity

Less than 80%

Environment condition

-4 ~ 140°F (-20 ~ 60°C)

Storage Temperature

Storage Humidity

Less than 85%

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

EXTERNAL CONTROL THROUGH RS-232C

The RS-232C port allows you connect the RS-232C input jack to an external control device (such as a computer

or an A/V control system) to control the TV’s functions externally.

ꢀ

Note: RS-232C on this unit is intended to be used with third party RS-232 control hardware and software.

The instructions below are provided to help with programming software or to test functionality using telenet

software.

RS-232C Setup

ANTENNA/

HDMI/DVI IN

VIDEO

CABLE IN

AV IN

AUDIO

S-VIDEO

AUDIO IN

(RGB/DVI)

RGB (PC) IN

SERVICE

ONLY

L(MONO)

H/P

RS-232C IN

(CONTROL & SERVICE)

AUDIO

VIDEO

COMPONENT IN

Type of Connector; D-Sub 9-Pin Male

No.

Pin Name

No connection

(

RXD Receive data

)

(

TXD Transmit data

)

(

DTR DTE side ready

)

(

DSR DCE side ready

)

(

RTS Ready to send

)

(

CTS Clear to send

)

No Connection

Download from Www.Somanuals.com. All Manuals Search And Download.

RS-232C Configurations

Either cable below can be used.

7-Wire Configuration

Serial female-female NULL modem cable

3-Wire Configurations

(

)

Not standard

RXD

TXD

GND

DTR

DSR

RTS

TXD

RXD

TXD

GND

DTR

DSR

RTS

TXD

RXD

GND

DTR

DSR

RTS

RXD

GND

DSR

DTR

CTS

RTS

CTS

D-Sub 9

ADJUST

EXIT

Set ID

Use this function to specify a TV ID number.

p.73

ENTER

Refer to ‘Real Data Mapping’. G

EZ Scan

SETUP

to select the

Press the

button and then use

or _Ebutton

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

menu.

Press the _Gbutton and then use

Set ID

or _Ebutton to

select

Press the _Gbutton and then use

Set ID

or _Ebutton to

to choose the desired TV ID number.

adjust

EZ Scan

The adjustment range of Set ID is 1~99.

Manual Scan

Channel Edit

DTV Signal

Input Source

Set ID

EXIT

button to return to the previous menu.

Press

button to return to TV viewing or press

Communication Parameters

ꢀ

(

Baud rate : 9600 bps UART

)

ꢀ

Stop bit : 1 bit

Data length : 8 bits

Parity : None

Communication code : ASCII code

Use a crossed (reverse) cable.

G This product has command echo back in the RS-232C Command.

NOTE

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

Command Reference List

DATA

(Hexadecimal)

DATA

(Hexadecimal)

COMMAND1 COMMAND2

01. Power

0 ~ 1

10. Tint

0 ~ 64

0 ~ 1

02. Input Select

03. Aspect Ratio

04. Screen Mute

05. Volume Mute

06. Volume Control

07. Contrast

(

_Gp.73)

0 ~ 1

11. Sharpness

12. OSD Select

13. Remote Control

Lock Mode

0 ~ 1

0 ~ 64

14. Treble

0 ~ 64

0 ~ 3

15. Bass

08. Brightness

09. Color

16. Balance

17. Color Temperature

DATA0

DATA1

DATA2

DATA3

DATA4

DATA5

COMMAND1 COMMAND2

(Hexadecimal) (Hexadecimal) (Hexadecimal) (Hexadecimal)

(Hexadecimal) (Hexadecimal)

physical major

program high program low

major low minor high minor low

attribute

18. Channel Tuning

19. Channel Add/Del

0 ~ 1

(

_Gp.75)

20. Key

21. Input Select

Transmission / Receiving Protocol

Transmission

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[OK] : Use the large character.

[Command1][Command2][ ][Set ID][ ][Data][Cr]

[Command 1] : First command to control the set.(j, k, m or x)

[Command 2] : Second command to control the set.

* In this model, TV will send the echo, CR, LF with acknowl-

edgement message.

* When it send the power on acknowledgement message, it will

be like below.

[Set ID] : You can adjust the set ID to choose desired TV ID

^{number in Setup menu. Adjustment range is 1}~ 99.

When selecting Set ID ‘0’, every connected the TV is

ex) ka 01 01 (CR) (LF) a 01 OK 01 x (CR) (LF)

(

)

^{controlled. Set ID is indicated as decimal 1}~ 99 on

Error Acknowledgement

(

)

^{menu and as Hexa decimal 0x0}~0x63 on transmission

/receiving protocol.

[Command2][ ][Set ID][ ][NG][Data][x]

[DATA] : To transmit command data.

Transmit ‘FF’ data to read status of command.

* In this model, TV will not send the status during the standby mode.

[Cr] : Carriage Return

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving abnormal data from non-viable functions

or communication errors.

Data1: Illegal Code

ASCII code ‘0x0D’

Data2: Not supported function

[

] : ASCII code ‘space (0x20)’

Data3: Wait more time

* In this model, TV will not send the status during the standby mode.

* Data Format

OK Acknowledgement

[Command2][ ][Set ID][ ][OK][Data][x]

[Command 2] : Use as command.

The TV transmits ACK (acknowledgement) based on this for-

mat when receiving normal data. At this time, if the data is

data read mode, it indicates present status data. If the data is

data write mode, it returns the data of the PC computer.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

[DATA] : Use the small character, if data is 0 x ab, it will send the ‘a’, ‘b’.

[NG] : Use the large character

* In this model, TV will send the echo, CR, LF with acknowl-

edgement message.

* In this model, TV will not send the status during the standby mode.

* Data Format

* When it send the power on acknowledgement message, it will

be like below.

[Command 2] : Use as command.

[Set ID] : Use the small character, if set ID is 10, it will send the ‘0’, ‘a’.

ex) ka 01 01 (CR) (LF) a 01 NG 01 x (CR) (LF)

Download from Www.Somanuals.com. All Manuals Search And Download.

01. Power (Command2:a)

06. Volume Control (Command2:f)

To adjust volume.

To control Power On/Off of the TV.

Transmission [k][a][ ][Set ID][ ][Data][Cr]

You can also adjust volume with the volume buttons on

remote control.

Data 0 : Power Off

Data 1 : Power On

Transmission [k][f][ ][Set ID][ ][Data][Cr]

Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x]

Data Min : 0 ~ Max : 64

* In a like manner, if other functions transmit ‘FF’ data

based on this format, Acknowledgement data feedback

presents status about each function.

Refer to ‘Real data mapping’ as shown below.

Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x]

* In this model, TV will send the Acknowledge after

power on processing completion.

07. Contrast (Command2:g)

* There might be a time delay between command and

acknowledgement.

To adjust screen contrast.

You can also adjust contrast in the Video menu.

Transmission [k][g][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

02. Input Select (Command2:b) (Main Picture Input)

To select input source for the TV.

Refer to ‘Real data mapping’ as shown below.

Transmission [k][b][ ][Set ID][ ][Data][Cr]

Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x]

Data 0: DTV

Data 1: Analog

Data 2: AV

Data 4: Component

Data 7: RGB-PC

08. Brightness (Command2:h)

Data 8: HDMI/DVI

To adjust screen brightness.

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

You can also adjust brightness in the Video menu.

Transmission [k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64(*transmit by Hexadecimal code)

03. Aspect Ratio (Command2:c) (Main picture format)

To adjust the screen format.

Refer to ‘Real data mapping’ as shown below.

Transmission [k][c][ ][Set ID][ ][Data][Cr]

Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x]

Date 1: 4:3

2: 16:9

6: Set by program

09. Color (Command2:i)

3: Horizon

4: Zoom

To adjust the screen color.

You can also adjust color in the Video menu.

Transmission [k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

04. Screen Mute (Command2:d)

Refer to ‘Real data mapping’ as shown below.

To select screen mute on/off.

Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x]

Transmission [k][d][ ][Set ID][ ][Data][Cr]

Data 0 : Screen mute off (Picture on)

Data 1 : Screen mute on (Picture off)

Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x]

*Real data mapping

0 : Step 0

A : Step 10 (SET ID 10)

05. Volume Mute (Command2:e)

To control volume mute on/off.

F : Step 15 (SET ID 15)

10 : Step 16 (SET ID 16)

You can also adjust mute using the MUTE button on

remote control.

Transmission [k][e][ ][Set ID][ ][Data][Cr]

Data 0 : Volume mute on (Volume off)

63 : Step 99 (SET ID 99)

64 : Step 100

Data 1 : Volume mute off (Volume on)

* Tint : R50 ~ G50

* Balance : L50 ~ R50

Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x]

Download from Www.Somanuals.com. All Manuals Search And Download.

APPENDIX

10. Tint (Command2:j)

16. Balance (Command2:t)

To adjust the screen tint.

To adjust balance.

You can also adjust tint in the Video menu.

Transmission [k][j][ ][Set ID][ ][Data][Cr]

Data Red : 0 ~ Green : 64

You can also adjust balance in the Audio menu.

Transmission [k][t][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’. _Gp.73.

Acknowledgement [ j ][ ][Set ID][ ][OK/NG][Data][x]

Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]

11. Sharpness (Command2:k)

17. Color Temperature (Command2:u)

To adjust color temperature.

To adjust the screen sharpness.

You can also adjust sharpness in the Video menu.

Transmission [k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

You can also adjust color temperature in the Video

menu.

Transmission [k][u][ ][Set ID][ ][Data][Cr]

Data 0: Medium 1: Cool 2: Warm 3: User

Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]

*Refer to ‘Real data mapping’. _Gp.73.

Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x]

18. Channel Tuning (Command: m a)

12. OSD Select (Command2:l)

To tune channel to following physical/major/minor number.

Transmission [m][a][ ][Set ID][ ][Data0][ ][Data1]

[ ][Data2][ ][Data3][ ][Data4][ ][Data5][Cr]

To select OSD (On Screen Display) on/off.

Transmission [k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD off

Data 1: OSD on

Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]

Digital channels have a Physical, Major, and Minor channel

number. The Physical number is the actual digital channel

number, the Major is the number that the channel should

be mapped to, and the Minor is the sub-channel. Since the

ATSC tuner automatically maps the channel to the Major

number, the Physical number is not required when sending

a command.

13. Remote Control Lock Mode (Command2:m)

To lock the remote control and the front panel controls

on the set.

Transmission [k][m][ ][Set ID][ ][Data][Cr]

Data 0: Lock off

Data 1: Lock on

Data 0: Physical Channel Number

Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]

NTSC air: 02~45, NTSC cable: 01, 0E~7D

ATSC air: 01~45, ATSC cable: 01~87

Data1 & 2: Major Channel Number

If you’re not using the remote control and front panel

controls on the TV, use this mode. When main power is

on/off, remote control lock is released.

Data1: High byte

Data2: Low byte

14. Treble (Command2:r)

Two bytes are available for the Major and Minor, nor-

mally only the second byte is used.

To adjust treble.

You can also adjust treble in the Audio menu.

Transmission [k][r][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)

Data3 & 4: Minor Channel Number

Not needed for NTSC.

*Refer to ‘Real data mapping’. _Gp.73.

Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]

15. Bass (Command2:s)

To adjust bass.

You can also adjust bass in the Audio menu.

Transmission [k][s][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64(*transmit by Hexadecimal code)

*Refer to ‘Real data mapping’. _Gp.73.

Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]

Download from Www.Somanuals.com. All Manuals Search And Download.

Main/Sub

Picture

Two/One

Part Channel

Using Physical

Channel

Data5:

Reserved

Step

Main

Two

One

Use

NTSC Air

NTSC Cable

ATSC Air

No Use

ATSC Cable_std

ATSC Cable_hrc

ATSC Cable_irc

ATSC cable_auto

Reserved

The table above lists the binary code which must be

converted to Hexadecimal before sending. For example:

The binary code to tune the sub source to an NTSC

cable channel is “1000 0001”, which translates to “81”

in Hex.

Reserved

* 7th bit : For which source do you want to change the

channel.

20. Key (Command: m c)

To send IR remote key code.

* 6th bit: Use a two part or one part channel. Most cases

just use 0 since it’s ignored when using NTSC.

Transmission [m][c][ ][Set ID][ ][Data][Cr]

* 5th bit: Use 0 with NTSC since it can only use the phys-

ical channel number. Normally use 1 for ATSC since most

times it doesn’t matter what the physical number is.

Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x]

* 4th bit: Set to 0.

Code

(Hexa)

Code

(Hexa)

Remote control

* 3-0 bits: Choose signal type.

INPUT

POWER

TIMER

* Tune Command Examples:

1. Tune to the analog (NTSC) cable channel 35.

Data 0 = Physical of 35 = 23

10-19

Number Key 0-9 06

Data 1 & 2 = No Major = 00 00

Data 3 & 4 = No Minor = 00 00

Data 5 = 0000 0001 in binary = 01

Total = ma 00 23 00 00 00 00 01

- (Dash)

BACK

MUTE

VOL +

VOL -

CH +

CH -

ENTER

SOUND

PICTURE

EXIT

SAP

2. Tune to the digital (ATSC) local channel 30-3.

Data 0 = Don’t know Physical = 00

Data 1 & 2 = Major is 30 = 00 1E

Data 3 & 4 = Minor is 3 = 00 03

ADJUST

FAV

Data 5 = 0010 0010 in binary = 22

Total = ma 00 00 00 1E 00 03 22

21. Input select(Command: x b) (Main Picture Input)

To select input source for TV.

Acknowledgement[a][ ][Set ID][ ][OK][Data0][Data1]

[Data2][Data3][Data4][x][a][ ][Set ID]

Transmission [x][b][ ][Set ID][ ][Data][Cr]

[ ][NG][Data0][x]

Data 00 : DTV (Antenna)

Data 01 : DTV (Cable)

Data 10 : Analog (Antenna)

Data 11 : Analog (Cable)

Data 20 : AV

Data 40 : Component

Data 60 : RGB PC

19. Channel Add/Del (Command: m b)

To add and delete the channels

Data 90 : HDMI/DVI

Transmission [m][b][ ][Set ID][ ][Data][Cr]

Data 0: Channel Delete

Data 1: Channel Add

Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x]

Download from Www.Somanuals.com. All Manuals Search And Download.

Leviton Switch HXC4D 1TW User Manual
Lowrance electronic GPS Receiver Hunt User Manual
LumiSource Indoor Furnishings LS VIVIDFL XX User Manual
Magnavox Cassette Player AQ 6591 User Manual
Makita Drill 6213D User Manual
Makita Saw 5277NB User Manual
Maytag Dishwasher MDB User Manual
McCulloch Lawn Mower PRE6556 User Manual
Memorex Computer Monitor MT3010OM User Manual
METRObility Optical Systems Network Card R111 12 User Manual