MT3010
User’s Guide
30" Wide-screen LCD Stereo HDTV*
Monitor with Integrated TV Tuner
* High Definition (HDTV) monitors require an optional set-top box to receive true digital high definition broadcasts.
Before operating this product,
Download from Www.Somanuals.com. All Manuals Search And Download.
please read these instructions completely.
IMPORTANT SAFETY INSTRUCTIONS
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to alert
the user to the presence of uninsulated
dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
Before using the unit, be sure to read all operating instructions carefully. Please note that these are general
precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to
an outdoor antenna.
1. READ INSTRUCTIONS
All the safety and operating instructions should be read before the product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp
cloth for cleaning.
6. ATTACHMENTS
Do not use attachments not recommended by the product's manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub, washbowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing
serious injury and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the
manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and
uneven surfaces may cause the appliance and cart combination to overturn.
9. VENTILATION
Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be
placed near or over a radiator or heat source. This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to.
10. POWER SOURCES
This product should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your appliance dealer or local power company. For products intended to
operate from battery power, or other sources, refer to the operating instructions.
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into
the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from
the appliance.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
13. LIGHTNING
To protect your product from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it
from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning
and power-line surges.
14. POWER LINES
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out
parts that could result in fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section 810 of the National Electric Code, ANSI/NFPA 70,
provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire
to an antenna discharge product, size of grounding conductors, location of antenna discharge product, connection to
grounding electrodes, and requirements for grounding electrode.
18. SERVICING
Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician uses replacement parts specified by the
manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions, as an adjustment of other controls may result in damage and will often require extensive work
by a qualified technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance - this indicates a need for service.
23. HEAT
The product should be situated away from
heat sources such as radiators, heat
registers, stoves, or other products
(including amplifiers) that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
This reminder is provided to call the CATV
system installer's attention to Article 820-40
of the NEC that provides guidelines for
proper grounding and, in particular,
specifies that the cable ground shall be
connected to the grounding system of the
building, as close to the point of cable entry
as practical.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
3
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCE
To operate the unit using AC power, connect the AC Adapter to the AC jack on the
rear of the unit, then connect the AC adapter to a wall outlet having 120V AC, 60Hz
only.
NOTE: If the AC adapter’s plug does not fit into a nonpolarized outlet, do not file or
cut the wide blade.
CAUTION: Use only the AC adapter provided with this unit. Using another AC
adapter may damage the unit. When not using AC power, disconnect the AC adapter
from the wall outlet by pulling the plug (not the cord). Do not touch the AC adapter with wet hands.
LOCATION OF CONTROLS
FRONT
1
2 3 4 5 6 7
8
9
10
11 12 13
14
1. POWER Button - Press to turn the TV on; the
POWER indicator will light green and picture will
appear in approximately five seconds. Press again
to turn the TV off; the Power indicator will light red.
7. TV/VIDEO/PC Button - Press to switch between
the TV and the video inputs.
8. Left Speaker
9. Screen
2. CHANNEL Down Button - Press to select a lower
10. Base Stand
11. REMOTE SENSOR
numbered channel.
3. CHANNEL Up Button - Press to select a higher
12. POWER Indicator - Lights green when the unit is
warming up or is on, and lights red when the unit
is off.
numbered channel.
4. VOLUME Down Button - Press to lower the
volume.
13. AC Jack (Rear of Unit)
14. Right Speaker
5. VOLUME Up Button - Press to raise the volume.
6. MENU Button - Press to access the On-Screen
menu.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS (CONTINUED)
REAR PANEL
5
1
6
7
2
3
8
4
1. HDTV IN Jacks (R/L/PR/PB/Y)
2. S IN Jacks (R/L/S)
3. AV IN Jacks (R/L/V)
4. VGA IN Jack
5. UHF/VHF Antenna Jack
6. AUDIO OUT Jacks (R/L)
7. VGA AUDIO IN Jacks (R/L)
8. COMPONENT IN Jacks (R/L/CR/CB/Y)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
16
17
18
19
1
2
20
3
4
5
21
22
6
7
8
23
24
25
26
9
10
11
12
13
14
15
27
28
29
1. RECALL Button
16.POWER Button
2. CH LOCK Button
3. TV/AV/PC Button
4. CHANNEL Up Button
5. VOLUME Down Button
6. CHANNEL Down Button
7. MTS Button
17.Direct Channel Selection Buttons
18.FAVORITE CHANNEL Up Button
19.FAVORITE CHANNEL Down Button
20.MENU Button
21.VOLUME Up Button
22.MUTE Button
8. VIDEO MODE Button
9. WIDE Button
10.AUDIO MODE Button
11. SRS (Surround Sound) Button
12.IMAGE SOURCE Button
13.PIP/POP Button
23.DISPLAY Button
24.VIDEO MUTE Button
25.SLEEP TIMER Button
26.AUDIO AI Button
27.SWAP Button
28.SCREEN POSITION Button
29.CCD (Closed Caption Display) Button
14.SET Button
15.V-CHIP Button
6
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL (CONTINUED)
BATTERY INSTALLATION
Open the battery compartment cover.
1
Install two “AAA” batteries, paying attention to the
polarity diagram in the battery compartment.
+
–
Replace the battery compartment cover.
–
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Rechargeable and Carbon-zinc) or old batteries with
fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from
possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
NOTES:
• When there is an obstacle between the TV and the
transmitter, the transmitter may not operate.
• When direct sunlight, incandescent lamp, fluorescent
lamp or any other strong light shines on the REMOTE
SENSOR of the TV, the remote operation may be
unstable.
15 ft
30° 30°
FAQs:
Why is the remote control not working properly?
•
•
•
•
•
•
•
•
The remote control is not aimed at the sensor.
The remote control is too far away from the remote sensor.
There is too much light in the room.
There is an obstacle in the path of the beam.
The batteries are weak or dead.
The batteries are inserted incorrectly.
The TV is not plugged in.
The proper Function button is not pressed. For example, press the TV button to use the remote to operate the TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE (CATV)/SATELLITE CONNECTIONS
This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some
Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal
viewing requires the use of a descrambler device which is generally provided by the cable company.
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE
For basic cable tv service not requiring a converter/descrambler box,
connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the
rear of the TV.
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE
If you subscribe to a satellite service or a cable TV service which requires the use of a converter/descrambler box, connect
the incoming 75 ohm coaxial cable to the converter/descrambler or satellite box. Using another 75 ohm cable, connect the
output of the converter/descrambler or satellite box to the antenna jack on the TV. Follow the connections shown below. Set
the TV/VCR to the output channel of the converter/descrambler or satellite box (usually 3 or 4) and use the
converter/descrambler or satellite box to select channels.
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH SCRAMBLED
PREMIUM CHANNELS
If you subscribe to a satellite service or a cable TV service in which basic channels are unscrambled and premium channels
require the use of a converter/descrambler box, you may wish to use a signal splitter and an A/B switch box (available from the
cable company or an electronic supply store). Follow the connections shown below. With the switch in the “B” position, you can
directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the
converter/descrambler box (usually channel 3 or 4) and use the converter/descrambler box to tune scrambled channels.
FAQS:
I connected my cable, why can’t I get channels above 69?
Make sure AIR/CABLE is set to CABLE, see page 17. Also, make sure your cable company broadcasts channels in the
range you are searching.
Are the cables included?
No, the cables are sold separately; visit your local electronics store.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OUTDOOR ANTENNA CONNECTIONS
OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT SUPPLIED)
Follow the instructions for the type of antenna system you intend to use.
Combination VHF/UHF
Combination VHF/UHF
Antenna (Single 75 ohm cable
or 300 ohm twin-lead wire)
Antenna (Separate VHF and
UHF 300 ohm twin-leads)
Separate VHF/UHF Antennas
Connect the 75 ohm cable from the VHF
antenna and the UHF antenna twin-lead
wire to a combiner (NOT SUPPLIED).
Attach the combiner to the antenna jack.
NOTE: If your VHF antenna has a twin-
lead wire use a 300-75 ohm
matching transformer, then
connect the transformer to the
combiner.
Connect the 75 ohm cable from the Connect the UHF twin-lead wire to a
combination VHF/UHF antenna to the combiner (NOT SUPPLIED). Connect
antenna jack.
the VHF twin-lead to a 300-75 ohm
matching transformer (NOT SUPPLIED).
OR
If your combination antenna has a 300 Attach the transformer to the combiner.
ohm twin-lead wire, use a 300-75 ohm Attach the combiner to the antenna jack.
matching transformer (NOT SUPPLIED).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR CONNECTIONS
CONNECTION USING COAXIAL CABLE:
Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)
VCR
REAR OF TV
INCOMING CATV CABLE
From VCR OUT jack
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV.
3. Press the TV/VIDEO/PC button until regular TV or CATV appears on the TV screen and press PLAY on the VCR to
watch a tape.
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect a VCR to your television using Audio/Video cables. (CABLES NOT INCLUDED.)
REAR OF TV
VCR
INCOMING CATV CABLE
From VCR OUT jacks
AUDIO/VIDEO Cord
To TV IN jacks
1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s audio left and right AV IN jacks.
Connect the VCR’s video OUT jack to the TV’s video AV IN jack.
3. Press the TV/VIDEO/PC button until AV appears on the TV screen and press PLAY on the VCR to watch a tape.
FAQ:
My VCR has only 1 Audio jack, but this TV has two Audio input jacks, how do I connect it?
Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR CONNECTIONS (CONTINUED)
CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect an S-VIDEO VCR to your television using an S-video cable. (CABLES NOT
INCLUDED.)
REAR OF TV
VCR
To S AUDIO IN jacks
INCOMING CATV CABLE
To S VIDEO IN jack
From VCR AUDIO
OUT jacks
AUDIO Cord
1. Connect the cable, satellite or incoming antenna to the ANT jack on the rear of the VCR.
2. Connect the left and right audio cable from the VCR’s Audio OUT jacks to the TV’s audio left and right S IN jacks.
3. Connect the VCR’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.
4. Press the TV/VIDEO/PC button until S VIDEO appears on the TV screen and press PLAY on the VCR to watch a tape.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD CONNECTIONS
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect a DVD player to your television using Audio/Video cables. (CABLES NOT
INCLUDED.)
REAR OF TV
DVD PLAYER
From DVD OUT
AUDIO/VIDEO jacks
AUDIO/VIDEO Cord
To TV IN jacks
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s audio left and right AV IN jacks.
Connect the DVD’s video OUT jack to the TV’s video AV IN jack.
2. Press the TV/VIDEO/PC button until AV appears on the TV screen and press PLAY on the DVD to watch a DVD.
CONNECTION USING S-VIDEO CABLE:
Follow the instructions below to connect a DVD player to your television using the S-Video cable. (CABLES NOT INCLUDED.)
REAR OF TV
DVD PLAYER
To S AUDIO IN jacks
To S VIDEO IN jack
From DVD AUDIO
OUT jacks
AUDIO Cord
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s audio left and right S IN jacks.
2. Connect the DVD’s S-VIDEO OUT jack to the TV’s S-VIDEO IN jack.
3. Press the TV/VIDEO/PC button until S-VIDEO appears on the TV screen and press PLAY on the DVD to watch the
DVD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD CONNECTIONS (CONTINUED)
CONNECTION USING COMPONENT CABLES:
Follow the instructions below to connect a DVD player to your television using the Cr, Cb, Y jacks. (CABLES NOT
DVD PLAYER
From AUDIO
OUT Jacks
To AUDIO
IN Jacks
From COMPONENT
VIDEO OUT Jacks
To COMPONENT IN jacks
NOTE: Connecting the DVD player to the TV using the component cables will provide the highest quality picture.
Connecting using an S-video cable will provide the next highest quality picture, followed by standard Audio/Video
cable connection.
1. Connect the left and right audio cable from the DVD’s Audio OUT jacks to the TV’s audio left and right AV IN jacks.
2. Connect a video cable from the DVD’s Y, Pb, Pr OUT jacks to the TVs AV2 DVD IN (Cr, Cb, Y) jacks.
3. Press the TV/VIDEO/PC button until COMPONENT appears on the TV screen and press PLAY on the DVD to watch a
DVD.
STEREO CONNECTION
Follow the instructions below to connect a stereo system to your television. (CABLES NOT INCLUDED.)
STEREO
REAR OF UNIT
To Stereo's
AUDIO IN jacks
From AUDIO
OUT jacks
AUDIO/VIDEO Cord
1. Connect the left and right audio cable from the TV’s left and right Audio OUT jacks to the stereo system’s left and right
Audio IN jacks.
2. Refer to the stereo system’s owner’s manual for instructions.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HDTV CONNECTION
Follow the instructions below to connect an HDTV set top box to your television. (CABLES NOT INCLUDED.)
AUDIO/VIDEO Cord
From HDTV
AUDIO OUT jacks
HDTV SET
TOP BOX
To TV AUDIO
IN jacks
REAR OF TV
From HDTV
OUT jacks
Video Cord
To TV PR,
PB,Y IN jacks
1. Connect the left and right audio cable from the HDTV’s Audio OUT jacks to the TV’s HDTV left and right Audio IN jacks.
2. Connect a video cable from the Y, Pb, Pr OUT jacks to the TV’s HDTV IN jacks.
3. Press the TV/VIDEO/PC button until Y Pb Pr appears on the TV screen.
COMPUTER CONNECTION
Follow the instructions below to connect a computer to your television/monitor. (CABLES NOT INCLUDED.)
COMPUTER
REAR OF TV
When connected to a computer and
From AUDIO
OUT jacks
the unit is in the PC mode, you can
then adjust the following after
pressing the MENU button:
From VGA
OUT jack
To AUDIO
IN Jacks
H position: Horizontal (left and right)
position on the screen.
V position: Vertical (up and down)
position on the screen.
To VGA
IN jack
Phase: Adjust the phase to get the
best picture.
1. Connect the left and right audio cable from the computer’s Audio OUT jacks to the TV’s left and right VGAAUDIO IN jacks.
2. Connect a VGA cable from the computer’s VGA OUT jack to the TV’s VGA IN jack.
3. Press the TV/VIDEO/PC button until PC appears on the TV screen.
4. Refer to the computer’s owner’s manual for instructions.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE UNIT
Please follow the instructions and figure below to install the unit using the supplied wall brackets and
Hook Assemblies:
1. Before wall mounting the unit, you must remove the base stand as follows:
a. Remove the two screws, then remove the base cover as shown in figure 1.
b. Remove the eight screws, then remove the base stand as shown in figure 2.
FIGURE 1
FIGURE 2
CONTINUED ON THE NEXT PAGE
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WALL MOUNTING THE UNIT (CONTINUED)
2. Drill four 5mm holes through the wall for each bracket, or if there is a stud behind the wall where
you are putting the bracket, drill four 5mm holes through the wall and into the studs for each
bracket. See below figure 3 for lengths.
FIGURE 3
3. Secure the Hook Assemblies (A) to the TV by inserting the two screws for each Hook Assembly in
the pre-drilled holes in the rear of the set as shown in figure 4.
4. With a helper’s assistance, place the Hook Assemblies (A) carefully onto the Brackets (B) and slide
down until it is secure.
CAUTION: You must make sure the brackets are very securely screwed into the wall and the Hook
Assemblies are securely attached to the TV before securing the TV to the wall.
A
B
A
B
FIGURE 4
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK SETTING
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until
SYSTEM SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until
CURRENT TIME is selected.
3
4
1
2
Set the hours using the VOLUME DOWN button ‚ and set
the minutes using the VOLUME UP button ƒ.
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE AIR/CABLE OPTION
Set the AIR/CABLE option as follows:
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until
SYSTEM SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until
AIR/CABLE is selected.
3
4
2
1
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically.
Press the VOLUME UP ‚ or DOWN ƒ button to select
between AIR and CABLE.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE CHANNELS INTO MEMORY
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear
Press the CHANNEL UP ‚ or DOWN ƒ button until
CHANNEL SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until AUTO
SCAN is selected.
3
4
2
1
Press the VOLUME UP ‚ or DOWN ƒ button to stop Auto
Memory while it is searching (if desired).
When AUTO MEMORY is selected, press the VOLUME UP
button to start the Auto Search. The TV will automatically
cycle through all the channels and store active channels
into memory. When completed, the TV will be on the first
available channel.
FAQs:
Why can’t I access TUNING?
You cannot access the TUNING option if you are not in the AIR/CABLE mode, there is no need to.
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or
local area provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL UP or DOWN button?
Yes, the channels must be programmed into memory.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDING AND SKIPPING CHANNELS
After setting channels into memory, you can add or delete channels as follows:
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear
Press the CHANNEL UP ‚ or DOWN ƒ button until
CHANNEL SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until CH
SELECT is selected.
3
4
1
2
1
2
Select a channel to be skipped or added using the
Press the CHANNEL UP ‚ or DOWN ƒ button until
VOLUME UP ‚ or DOWN ƒ button.
CHANNEL SKIPPED is selected.
5
6
2
1
Using the VOLUME UP ‚ or DOWN ƒ button, select YES
to skip the channel or NO to keep the channel.
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING FAVORITE CHANNELS
Set up to ten channels into the Favorite Channel Preferences to easily access the channel. Set as follows:
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear
Press the CHANNEL UP ‚ or DOWN ƒ button until
CHANNEL SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until CH
SELECT is selected
3
4
1
2
1
2
Select a channel to be added to the Favorite Channel
Press the CHANNEL UP ‚ or DOWN ƒ button until
Preferences using the VOLUME UP ‚ or DOWN ƒ button.
PREFERENCES is selected.
5
6
1
2
3
2
1
Using the VOLUME UP ‚ or DOWN ƒ button, select YES
to add the channel to the preferences or NO to delete or
not add the channel to the preferences. You can set up to
10 Favorite Channels. Exit the menu by pressing the
MENU button „ twice.
When watching TV, simply press the FAVORITE CHANNEL
UP ‚ or DOWN ƒ button to cycle through your favorite
channels.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE SLEEP TIMER
To set the TV to turn off after a preset amount of time, follow the steps below:
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear
Press the CHANNEL UP ‚ or DOWN ƒ button until
SYSTEM SETTING is selected, then press the VOLUME
UP button „ to select it.
Press the CHANNEL UP ‚ or DOWN ƒ button until SLEEP
TIMER is selected.
3
4
2
1
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
Select the desired sleep time from 10 minutes (“10M”) to
90 minutes (“90M”) using the VOLUME UP ‚ button.
NOTE: To cancel the sleep function, press the VOLUME
DOWN button ƒ to select OFF or use the VOLUME UP
button ‚ to select “00M”.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION
1
OPTIONS
2
AIR:
If using a
VHF/UHF
antenna.
CABLE: If using Cable
TV.
Press the POWER button to turn on the TV; the POWER
indicator will light green.
Set the AIR/CABLE option as described on page 18.
3
4
3
2
1
1
2
Adjust the volume level by pressing the VOLUME UP ‚ or
DOWN ƒ button. The volume level will be indicated on the
screen by a green numerical display between 0 and 100
where 0 is the lowest setting and 100 is the loudest.
For proper operation, before selecting channels, they
must be set into the TV’s program memory, see page 19.
Press and release the CHANNEL UP ‚ or DOWN ƒ button.
The TV automatically stops at the next channel set into
memory. This will not operate if channels are not set into
memory.
Direct Program Selection buttons (0 - 9, 100+)
Use these buttons to select a channel. The channel number
will appear at the top right corner of the screen.
• For Channels 01 through 99, press the two digits in order.
• For Channels 100 through 125, press the 100 button „,
then the remaining two digits.
NOTES:
•
When TV/CATV is set to TV, only channels up to 69
can be selected. When set to CATV, channels up to
125 can be selected.
•
If an invalid channel is selected, the display will revert
to the original channel.
FAQs:
Why do I only receive 69 channels, when my cable goes much higher?
AIR/CABLE option must be set to CABLE when using cable, see page 18.
Why are some channels scrambled?
You must subscribe to these channels through your cable company.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION (CONTINUED)
MUTE
RECALL
1
1
3
2
1
Press the MUTE button ‚ to turn off the sound. The TV’s
sound will be silenced and “AUDIO MUTE” will appear on
the screen for a few seconds. The sound can be turned
back on by pressing this button again or one of the
VOLUME UP ƒ or DOWN „ button.
Press the RECALL button to go back to the last channel
selected. Press the RECALL button again to return to the
channel you were watching.
TV/AV/PC
MTS
1
1
Repeatedly press this button to cycle through the device(s)
connected to the INPUT jacks (TV/CATV, AV, S-VIDEO,
COMPONENT, YPbPr and PC).
Press to select one of the following sound modes:
STEREO: Select for channels that are broadcasting in
stereo.
MONO: Select for channels broadcasting in mono or if you
are having difficulty receiving a stereo signal.
SAP (Separate Audio Program): Select to listen to a
Separate Audio Program which is usually a foreign
language translation.
FAVORITE CHANNEL
SLEEP TIMER
1
1
1
2
Press repeatedly to set the sleep time between “00” and
“90” (each press will increase the time by 10 minutes).
When the sleep time is up, the TV will shut off. Select “00”
to cancel the sleep function.
Press the FAVORITE CHANNEL UP ‚ or DOWN ƒ button
to cycle through your favorite channels, as set on page 21.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION (CONTINUED)
DISPLAY
VIDEO MODE
1
1
Press the DISPLAY button once to show the time. Press
again to show the mode (i.e. S-VIDEO). Press a third time
to clear the screen or wait three seconds and the screen
will clear automatically.
Press to select a mode (PRESET, SOFT or USER) as set
on page 28.
NOTE: You cannot change the video MODE while using
the Y Pb Pr or computer inputs.
AUDIO MODE
VIDEO MUTE
1
1
Press to select a mode (PRESET, SOFT or USER) as set
on page 29.
Press and the picture will disappear from the screen, but
the sound will still be heard.
NOTE: You cannot change the audio MODE while using
the Y Pb Pr or computer inputs..
CHANNEL LOCK
SRS
1
1
This feature allows the TV’s left and right speakers to
provide a surround sound effect.
Press to cycle through the surround modes as follows:
SURROUND 1: Simulated stereo
SURROUND 2: Stereo surround
SURROUND 3: Mono surround
Channel Lock provides instant access to one of your
favorite channels at the touch of a button. To set, go to the
channel you want to set as the channel lock, then press
and hold the CHANNEL LOCK button on the remote until
the on-screen display shows “LOCKED”; the channel is
now locked in. To access, simply press the CHANNEL
LOCK button on the remote and the TV will automatically
tune to that channel.
SURROUND OFF: To turn off surround sound.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATION (CONTINUED)
WIDE
AUDIO AI
1
1
Press the WIDE button to select one of the screen modes:
FULL: The image will stretch to cover the full screen; use this
MODE when viewing wide-screen programming material.
M1: The image will increase slightly over the standard size
M2: The image will increase slightly over M1.
M3: The image will increase slightly over M2.
M4: The image will increase slightly over M3.
4:3: The image will be the standard viewing size.
Each broadcasting channel has its own signal conditions
and it is inconvenient to adjust the volume every time the
channel is changed or when a commercial comes on.
Audio AI automatically adjusts the volume of the desired
channel by lowering the sound output when the modulation
signal is high or by raising the sound output when the
modulation signal is low. Press the AUDIO AI button to turn
this feature on or off.
PIP and POP
SWAP
1
1
Press the PIP/POP button to turn picture-in-picture on;
press a second time to turn picture on picture (split screen)
on (this will show a picture next to a picture). Press a third
time to turn PIP or POP off.
Press the SWAP button to alternate the screens when
using PIP or POP. This will also alternate what screen the
VOLUME, VIDEO SOURCE, etc buttons control.
NOTE: One picture will be used for the TV/AV/S-VIDEO/
COMPONENT signal and the other picture will be used for
the HDTV-YPbPr/PC signal only.
SCREEN POSITION
IMAGE SOURCE
1
1
When PIP or POP selection is on, press the IMAGE
SOURCE button to change the mode of the picture (the
picture with the green color boundary).
NOTE: If in the PC or YPbPr mode, you can only change
to PC or YPbPr mode. If in the TV, AV, S-VIDEO or
COMPONENT mode, you can only change to the TV, AV,
S-VIDEO or COMPONENT mode. For example, you cannot
change from PC mode to S-VIDEO mode.
Press this button to select one of the four corners of the
screen for the PIP picture.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOSED CAPTIONS
TEXT: The Text Closed Caption Mode will usually fill the
screen with a programming schedule or other information.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed Captioning
will display text on the screen for hearing impaired viewers or
it will translate and display text in another language.
OFF: Turns closed captions off.
CHANNEL: Select between the four closed caption
channels.
After selecting a Closed Caption Mode, it will stay in effect
until it is changed, even if the channel is changed. If the
Captions signal is lost due to a commercial or a break in the
signal, the Captions will reappear when the signal is received
again. If the channels are changed, the Captions will be
delayed approximately 10 seconds.
CLOSED CAPTIONING WITH A VCR
Closed Captioned programs can be recorded and played
back on a VCR with the Closed Captioned text intact. The
Closed Captioned text will disappear during Cue (Fast
Forward Search), Review (Rewind Search) and Pause
modes or if the VCR tracking is not adjusted properly.
The Captions will appear in places on the screen where they
will least interfere with the picture, usually on the bottom of
the screen. News programs will usually show three-line
Closed Captions which scroll onto the screen. Most other
shows provide two or three lined Captions placed near the
character who is speaking so the viewer can follow the
dialogue.
TO VIEW CLOSED CAPTIONS
Enter the MENU and select CLOSED CAPTION. Scroll down
and select the desired settings:
MODE: Select either CC (Captions) or TEXT (Full screen
text) or OFF as follows:
Words in italics or underlined describe titles, words in foreign
languages or words requiring emphasis. Words that are sung
usually appear enclosed by musical notes.
CAPTIONS: This Closed Caption Mode will display text on
the screen in English or another language. Generally,
Closed Captions in English are transmitted on Captions 1
and Closed Captions in other languages are transmitted on
Captions 2.
For television programs broadcasting with Closed Captions,
look in your TV guide for the Closed Captions symbol (CC).
NOTES:
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed
Captioning, especially with live programs. This is because during live programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may interfere with
Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Caption signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
CLOSED CAPTIONS
1
FAQs:
When I press the RECALL or MUTE button, the captions
do not appear, is this normal?
Yes, this is normal for this unit. Once the display
information disappears, the captions will continue.
I entered the Captions mode, but no captions are
appearing, why?
If no caption signal is received, no captions will appear, but
the television will remain in the Caption mode.
Press the CCD button to enter the CCD MENU and select
CLOSED CAPTION. Select the desired settings as
described above.
Why is there a big black box on the screen?
Closed Captioning will display text on the screen for the
Because you are in a Captions mode. Turn the captions
hearing impaired.
off, or select a different Captions mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN CONTROL ADJUSTMENTS (PICTURE)
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until VIDEO
ADJUST is selected, then press the VOLUME UP button „
to select it. Press the CHANNEL UP ‚ or DOWN ƒ button
until VIDEO MODE is selected.
3
4
1
4
3
2
2
1
Using the VOLUME UP ‚ or DOWN ƒ button, select SOFT
or PRESET to access the preset settings. Select USER if
you want to customize and save your own settings for
future use.
Press the CHANNEL UP ‚ or DOWN ƒ button until one of
the settings (BRIGHTNESS/CONTRAST/TINT/COLOR or
SHARPNESS) is selected. Using the VOLUME UP „ or
DOWN ꢀ button, adjust the desired setting.
5
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN CONTROL ADJUSTMENTS (SOUND)
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until AUDIO
ADJUST is selected, then press the VOLUME UP button „
to select it. Press the CHANNEL UP ‚ or DOWN ƒ button
until AUDIO MODE is selected.
3
4
1
4
3
2
2
1
Using the VOLUME UP ‚ or DOWN ƒ button, select SOFT
or PRESET to access the preset settings. Select USER if
you want to customize and save your own settings for
future use.
Press the CHANNEL UP ‚ or DOWN ƒ button until one of
the settings (VOLUME, TREBLE, BASS or BALANCE) is
selected. Using the VOLUME UP „ or DOWN ꢀ button,
adjust the desired setting.
5
6
1
1
4
3
2
4
3
2
Press the CHANNEL UP ‚ or DOWN ƒ button until MTS is
selected. Using the VOLUME UP „ or DOWN ꢀ button,
select the MTS setting (MONO or STEREO).
Press the CHANNEL UP ‚ or DOWN ƒ button until
SPEAKER is selected. Using the VOLUME UP „ or DOWN
ꢀ button, turn this setting ON or OFF. Turn off if you want
to use the external AUDIO OUT jacks on the rear of the set
and mute the TV’s built-in speakers.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN SETTINGS
1
2
1
1
2
2
3
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until
SCREEN SETTING is selected, then press the VOLUME
UP button „ to select it. Press the CHANNEL UP ‚ or
DOWN ƒ button until PIP (picture in picture) is selected.
3
4
1
4
3
2
2
1
Turn this option ON or OFF using the VOLUME UP ‚ or
DOWN ƒ button. If set to ON, the TV will show the picture
in picture.
Press the CHANNEL UP ‚ or DOWN ƒ button until PIP
POSITION (picture in picture position) is selected. Press
the VOLUME UP „ or DOWN ꢀ button to set the position
the PIP will appear on the screen (1 upper left; 2 upper
right; 3 lower left; 4 lower right).
5
6
1
1
4
3
2
4
3
2
Press the CHANNEL UP ‚ or DOWN ƒ button until
SOURCE is selected. Press the VOLUME UP „ or DOWN
ꢀ button to select the source.
Press the CHANNEL UP ‚ or DOWN ƒ button until POP
(split screen) is selected. Turn this option ON or OFF using
the VOLUME UP „ or DOWN ꢀ button. If set to ON, the
TV will show two screens next to each other.
CONTINUED ON THE NEXT PAGE
30
Download from Www.Somanuals.com. All Manuals Search And Download.
SCREEN SETTINGS (CONTINUED)
7
8
1
1
4
4
3
2
3
2
Press the CHANNEL UP ‚ or DOWN ƒ button until SWAP
is selected. Turn this option ON or OFF using the VOLUME
UP „ or DOWN ꢀ button. If set to ON, the PIP/POP
screens will swap.
Press the CHANNEL UP ‚ or DOWN ƒ button until
SCREEN MODE is selected. Press the VOLUME UP „ or
DOWN ꢀ button to select one of the screen modes as
follows:
FULL: The image will stretch to cover the full screen; use
this MODE when viewing wide-screen programming
material.
M1: The image will increase slightly over the standard size.
M2: The image will increase slightly over M1.
M3: The image will increase slightly over M2.
M4: The image will increase slightly over M3.
4:3: The image will be the standard viewing size.
9
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically.
NOTE: For the PIP or POP function, one of the pictures must be in the HDTV-YPbPr or PC MODE and the other must be in
the TV, AV, S-VIDEO or COMPONENT mode, otherwise the PIP/POP function will not operate.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING V-CHIP
V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for
programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies
access to programming if the program’s rating meets the limitations you select. In this case, the program will be blocked.
V-CHIP SET-UP
1
2
1
4
V-CHIP SETTING
INPUT PASSWORD
? ? ? ?
1
3
2
2
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until V-
CHIP is selected, then press the VOLUME UP button „ to
select it. Using the Direct Channel Selection buttons (0-9)
ꢀ, enter the password (“0000” is the preset password if you
have not changed it). This password can be changed to
consist of different numbers (i.e. 1467, 3732) after the
original password is entered.
3
1
2
3
Once in the V-CHIP MENU, press the CHANNEL UP ‚ or
DOWN ƒ button until V-CHIP is selected, then press the
VOLUME UP button „ to turn the V-Chip ON. Then change
the settings as per the next two pages.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
MPAA RATING SET-UP
1
2
1
2
3
Enter the V-CHIP menu screen as described on page 32.
Press the CHANNEL UP ‚ or DOWN ƒ button until MPAA
RATING is selected, then press the VOLUME UP button „
to select it.
3
4
1
4
3
2
Press the CHANNEL UP ‚ or DOWN ƒ button to select a
rating, then press the the VOLUME UP „ or DOWN ꢀ
button to block (see below).
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
G:
All ages.
NC17: 17 years old and
PG:
Parental Guidance.
above.
PG-13: Parental Guidance, X:
less than 13 years
old.
Adult only.
R:
Under 17 years old,
Parental Guidance
suggested.
All programs with a higher rating than the one selected will
also be blocked.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
TV RATING SET-UP
1
2
1
2
3
Enter the V-CHIP menu screen as described on page 32.
Press the CHANNEL UP ‚ or DOWN ƒ button until TV
GUIDELINES is selected, then press the VOLUME UP
button „ to select it.
3
4
3
2
1
4
Press the CHANNEL UP ‚ or DOWN ƒ button to select a
rating, then press the the VOLUME UP „ or DOWN ꢀ
button to block (see below).
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
FV:
D:
Fantasy Violence
Suggestive
S:
V:
Sexual Situations
Violence
Dialogue
L:
Adult Language
All programs with a higher rating than the one selected will
also be blocked.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING PARENTAL CONTROL (CONTINUED)
CHANGING THE PASSWORD
1
2
1
2
3
Enter the V-CHIP menu screen as described on page 32.
Press the CHANNEL UP ‚ or DOWN ƒ button until
PASSWORD SETTING is selected, then press the
VOLUME UP button „ to select it.
3
4
3
2
1
4
Use the VOLUME UP ‚ or DOWN ƒ buttons to select the
first digit (0-9), then use the CHANNEL UP „ or DOWN ꢀ
button to select “1ST PASSWORD” to the ‘4TH
PASSWORD”.
NOTE: For the “1ST PASSWORD” to the “4TH
PASSWORD”, “1ST PASSWORD” is the left most digit,
“2ND PASSWORD “ is the second digit, etc.
Please make sure to write down the password in a safe
place.
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING THE ON TIMER
1
2
1
1
2
3
2
Press the POWER button ‚ to turn on the TV; the POWER
indicator will light green. Press the MENU button ƒ; the
MENU screen will appear.
Press the CHANNEL UP ‚ or DOWN ƒ button until
SYSTEM SETTING is selected, then press the VOLUME
UP button „ to select it. Press the CHANNEL UP ‚ or
DOWN ƒ button until TV ON STATUS is selected.
3
4
1
2
2
1
3
Turn this option ON or OFF using the VOLUME UP ‚ or
DOWN ƒ button.
Press the CHANNEL UP ‚ or DOWN ƒ button until TV ON
TIME is selected, then press the VOLUME UP button „ to
select it.
5
6
1
2
Set the hours using the VOLUME DOWN button ‚ and set
the minutes using the VOLUME UP button ƒ.
Press the MENU button once when finished to return to the
Main menu. Press the MENU button again to exit the Main
menu. If no button pressed for 15 seconds, the menu will
disappear automatically. The TV will then stay on for the
selected time, and then shut off automatically.
FAQs:
Does the clock have to be set before using the On Timer?
Yes, the clock must be set.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Check the following before requesting service:
SYMPTOM
POWER
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power.
The AC power cord is not
connected.
Connect the AC power cord to
the AC outlet.
TV BROADCAST RECEPTION
TV station experiencing problems.
Try another channel.
Poor or no picture.
Picture control is not adjusted.
Possible local interference.
Check picture control adjustments.
Check for source of reception disturbance.
Antenna/CATV connector is not connected. Check CATV connection or VHF/UHF antenna.
TV station experiencing problems.
Try another channel.
Picture wobbles or drifts. Cable TV channel is scrambled.
Possible local interference.
A Cable box needs to be used (if desired).
Check for source of reception disturbance.
CATV connected improperly or not connected. Check all CATV connections.
No CATV reception.
AIR/CABLE option set to AIR.
Cable TV service interrupted.
Set AIR/CABLE option to CABLE.
Contact your Cable TV company.
Set AIR/CABLE option to CABLE.
Try another channel.
No reception above ch13. AIR/CABLE option set to AIR.
TV station experiencing problems.
MUTE button is pressed.
Press MUTE button again.
Poor or no sound.
Possible local interference.
Check for source of reception disturbance.
Antenna/CATV connector is not connected. Check CATV connection or VHF/UHF antenna.
Volume is set to minimum.
TV station stopped broadcasting.
Sleep Timer is set.
Increase volume.
Tune to a new channel.
TV shuts off.
Set Sleep Timer to Off.
TV signal is weak.
Check CATV or VHF/UHF antenna connection.
Try another channel.
Closed Captioning not
working.
TV station experiencing problems or
program tuned is not closed captioned.
Closed Captioning not turned on.
Turn Closed Captioning on.
REMOTE CONTROL
Distance is too far or too much
light in the room.
Operate within 15 feet or reduce
the light in the room.
Remote control does
not operate.
There is an obstacle in the path of the beam Clear the path of the beam and/or aim the remote
or remote is not aimed at the sensor. at the sensor.
The batteries are weak or installed incorrectly. Replace the batteries or install correctly.
PARENTAL CONTROL (V-CHIP)
V-Chip setting is turned off.
Turn V-Chip setting on.
Parental control
protection is not
working properly.
News or sports event being broadcast.
Parental Control does not work with news or
sporting events.
Ratings not set.
Set ratings as desired.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEPTION DISTURBANCES
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna.
Outdoor antennas are recommended for best results if not using cable or a satellite. The most common types of television
interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the
disturbance may be caused by the local cable company broadcast.
IGNITION:
Black spots or horizontal streaks may appear, picture may flutter or drift.
Usually caused by interference from automobile ignition systems, neon
lamps, electric drills and other electric appliances.
GHOSTS:
Ghosts are caused by the television signal following two paths. One is the
direct path and the other is reflected from tall buildings, hills or other
objects. Changing the direction or position of the antenna may improve the
reception.
SNOW:
If your receiver is located in the fringe area of a television station where the
signal is weak, your picture may be marred by the appearance of small
dots. When the signal is extremely weak, it may be necessary to install an
external antenna to improve the picture.
RADIO FREQUENCY INTERFERENCE:
This interference produces moving ripples or diagonal streaks, and in some
cases, causes loss of contrast in the picture.
PICTURE SIZE VARIATION:
A slight picture size variation is quite normal when you adjust the
CONTRAST or BRIGHTNESS setting.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Item
Characteristics
Type
Specifications
LCD Panel
Super IPS/Super MVA
643.2 (H) * 385.92(V)mm (29.6” diagonal)
0.1675mm*0.5025mm*RGB
WXGA 1280*768
Active Display Area
Pixel Pitch
Max.Resolution
Contrast Ratio
Brightness
500:1(Typical)
500 cd/m2(Typical)
Response Time
Display Color
Viewing Angle
Back Light
25ms
16.7M colors
85¡(L) / 85¡(R) / 85¡(U) / 85¡ (D)
16 CCFL
Lamp Life
50000hrs
TV System
Color System
Sound System
Stereo System
Channel System
TV Tuner System
CATV
NTSC
M
BTSC
USA
PLL,55.25MHz-801.25MHz
PLL,55.25MHz-801.25MHz
Closed Caption,V-Chip
3D Motion Adaptive De-interlace, Film Mode
Detection, 3D Comb Filter, 3D Noise Reduction
Sharpness(DCTI,DLTI),PIP,Duel Picture,Channel
Scan,Wide Mode,Favorite Channel, Surround
Sound,Audio AI,
Subtitles
TV Performance
Video System
Video Signal
Y:1Vp-p(with Sync.),C:0.286Vp-
p,Impedance:75ohms
Video Color System
YUV Color System
VGA signal
NTSC,PAL,SECAM
480i,480p,1080i,720p
Monitor System
RGB 0.7Vp-p signal,Sync.TTL(input) Separate
Horizontal 30KHz to 70KHz,Vertical 50Hz to 85Hz
VGA 640*350(70Hz)
Frequency Range
Display Mode
VGA 640*480(50/60/66/70/72/75/85Hz)
VGA 720*350(70Hz)
VGA720x400(70Hz)
SVGA(56/60/72/75/85HZ)
MAC 832X624(75HZ)
XGA 1024*768(60/70/75/85Hz)
SXGA 1280*1024(60/75Hz)
MAC 1152*870(75Hz)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS (CONTINUED)
Audio System
Terminals
3D Surround
Yes
Amplifier
4W(10% THD max.)
10W
Speaker
AV1
RCA for CVBS,Audio R/L
S Din for S-Video,Audio R/L
RCA for YUV and Audio R/L
RCA for YUV and Audio R/L
D-sub 15pin VGA
S
COMPONENT(Y Cb Cr)
HDTV(Y Pb Pr)
PC Analog Port
PC Stereo input
Audio Line Out
RCA,Audio R/L
RCA,Audio R/L
OSD Language
Front Control
English
Power, Menu,Source, Channel Up/Down, Volume
UP/Down
Power Supply
Input
AC 120Vrms(60 Hz)
Max.Power Consumption 140W
Power Saving
Dimensions
Weight
Less than 3W
Height 22” x Width 39.2” x Depth 10.6”
38.6 lbs
CARE AND MAINTENANCE
To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the receiver may
be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. Mild
soap and a soft, damp cloth may be used.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN
THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Taiwan
Download from Www.Somanuals.com. All Manuals Search And Download.
|