RC199M_NA1ULL_52F
DVD RECORDER/
VIDEO CASSETTE
RECORDER
OWNER’S MANUAL
MODEL: RC199H
Before connecting, operating or adjusting this product,
please read this owner’s manual carefully and completely.
Call us and we will
guide you through
your first recording,
for free.
1-800-243-0000
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC WARNING: This equipment may generate or
use radio frequency energy. Changes or modifica-
tions to this equipment may cause harmful interfer-
ence unless the modifications are expressly
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
approved in the instruction manual. The user could
lose the authority to operate this equipment if an
unauthorized change or modification is made.
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch cir-
cuits. Check the specification page of this owner's
manual to be certain.
REGULATORY INFORMATION: FCC Part 15
Do not overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire
insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically
examine the cord of your appliance, and if its appear-
ance indicates damage or deterioration, unplug it, dis-
continue use of the appliance, and have the cord
replaced with an exact replacement part by an
authorized servicer.
This equipment has been tested and found to com-
ply with the limits for a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference when the product is operated in
a residential installation. This product generates,
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful interference
to radio communications. However, there is no guar-
antee that interference will not occur in a particular
installation. If this product does cause harmful inter-
ference to radio or television reception, which can
be determined by turning the product off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the appliance.
To disconnect power from the mains, pull out the
mains cord plug. When installing the product, ensure
that the plug is easily accessible.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the product
and receiver.
•
•
Connect the product into an outlet on a circuit
different from that to which the receiver is con-
nected.
Consult the dealer or an experienced radio/TV
technician for help.
FCC COMPLIANCE: The responsible party for this
product’s compliance is:
LG Electronics U.S.A., Inc.,1000 Sylvan Avenue,
Englewood Cliffs, NJ.
Phone: 1-201-816-2000.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S
MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in elec-
tric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the follow-
ing procedures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future
reference.
11. Only use attachments/accessories specified
by the manufacturer.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For exam-
ple: near a bath tub, wash bowl, kitchen sink, laun-
dry tub, in a wet basement; or near a swimming
pool; and other areas located near water.
12. Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with apparatus. When a cart is used, use cau-
tion when moving the cart/product combina-
tion to avoid injury from tip-over.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use liq-
uid cleaners.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instruc-
tions have been adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the product
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the
product, the product has been exposed to rain
or moisture, does not operate normally, or has
been dropped.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug
does not fit into your outlet, consult an electri-
cian for replacement of the obsolete outlet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
RECORDING
About DVD recording . . . . . . . . . . . . . . . . . .36
Notes for recording . . . . . . . . . . . . . . . . . . . .36
Basic Recording from a TV . . . . . . . . . . . . . .37
Instant Timer Recording . . . . . . . . . . . . . . . .37
Timer Recording . . . . . . . . . . . . . . . . . . . .38-39
Dubbing from DVD to VCR . . . . . . . . . . . . . .40
Dubbing from VCR to DVD . . . . . . . . . . . . . .40
Recording from External Components . . . . .41
Additional Information . . . . . . . . . . . . . . . . .41
Recording from DV Input . . . . . . . . . . . . . . .42
About the
Symbol Display . . . . . . . . . . . . .6
Symbol Used in this Manual . . . . . . . . . . . . . .6
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .6
Moisture Condensation . . . . . . . . . . . . . . . . . .6
Recordable and Playable Discs . . . . . . . . . . .7
Recommended recordable DVD discs . . . . . .7
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . .8
Regional Code . . . . . . . . . . . . . . . . . . . . . . . . .8
Restrictions on video recording . . . . . . . . . . .9
What is ‘CPRM’? . . . . . . . . . . . . . . . . . . . . . . .9
Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Notice for Progressive Scan Use . . . . . . . . . .9
Useable Memory Cards . . . . . . . . . . . . . . . . .10
Using Memory Card . . . . . . . . . . . . . . . . . . . .10
About the Remote Control . . . . . . . . . . . . . .10
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . .11
Remote Control . . . . . . . . . . . . . . . . . . . . . . .12
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .13
EDITING
Title List and Chapter List Menu Overview .43
VR Mode: Original and Playlist Editing . . . .44
Adding Chapter Markers . . . . . . . . . . . . . . . .44
Changing Title Thumbnails . . . . . . . . . . . . . .44
Making a New Playlist . . . . . . . . . . . . . . . . . .45
Adding Additional Title/Chapters to the
HOOKUP AND SETTINGS
Playlist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Deleting an Original or Playlist Title/
Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Deleting a Part . . . . . . . . . . . . . . . . . . . . . . . .46
Naming a Title . . . . . . . . . . . . . . . . . . . . . . . .47
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . .47
Moving a Playlist Chapter . . . . . . . . . . . . . . .48
Hide a Chapter/Title . . . . . . . . . . . . . . . . . . . .48
Protect a Title . . . . . . . . . . . . . . . . . . . . . . . .48
Divide One Titles Into Two . . . . . . . . . . . . . .49
Combining Two Chapters Into One . . . . . . . .49
Overwriting Recording . . . . . . . . . . . . . . . . .50
Viewing Title List menu displayed on other
DVD Recorders or Players . . . . . . . . . . . . . .50
Playing Your Recordings on Other DVD
Connecting an Antenna or Cable TV . . . . . .14
Connections to your TV . . . . . . . . . . . . . .15-16
Connection to an Amplifier . . . . . . . . . . . . . .17
Accessory Audio/Video (A/V)
Connections to Recorder . . . . . . . . . . . . . . .18
Connecting a Digital Camcorder . . . . . . . . . .18
Initial Setup Wizard . . . . . . . . . . . . . . . . . . . .19
Using the Home Menu . . . . . . . . . . . . . . . . . .20
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .20
General Settings . . . . . . . . . . . . . . . . . . . .21-22
Language Settings . . . . . . . . . . . . . . . . . . . .22
Audio Settings . . . . . . . . . . . . . . . . . . . . .22-23
Lock (Parental Control) Settings . . . . . . . . .23
Recording Settings . . . . . . . . . . . . . . . . . . . .24
Disc Settings . . . . . . . . . . . . . . . . . . . . . .24-25
General Explanation of On-Screen Display .26
Displaying Information While Watching TV . .26
Displaying Disc Information on-screen . . . . .26
Players (Finalizing a Disc) . . . . . . . . . . . . . . .50
REFERENCE
Controlling Your TV with the Supplied
Universal Remote Control . . . . . . . . . . . . . . .51
Language Code List . . . . . . . . . . . . . . . . . . .52
Area Codes List . . . . . . . . . . . . . . . . . . . . . . .52
Troubleshooting . . . . . . . . . . . . . . . . . . . .53-55
Reset the Recorder . . . . . . . . . . . . . . . . . . .55
Specifications . . . . . . . . . . . . . . . . . . . . . .56-57
PLAYBACK
Playing a Tape . . . . . . . . . . . . . . . . . . . . . . . .27
Playing a DVD or Video CD . . . . . . . . . . . . . .27
VCR Playback Features . . . . . . . . . . . . . . . . .28
DVD or Video CD Playback Features . . . .29-30
Special Playback Options . . . . . . . . . . . . . . .31
Playing a DivX Movie File . . . . . . . . . . . . . . .32
Playing an Audio CD or MP3/WMA files . . . .33
Viewing a JPEG files . . . . . . . . . . . . . . . .34-35
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read
this owner’s manual carefully and retain for future
reference.
Notes on Discs
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
About the Symbol Display
“
” may appear on your TV display during operation
and indicates that the function is not permitted by this
unit or specific media.
Symbol Used in this Manual
Note:
Indicates special notes and operating fea-
tures.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Tip:
Indicates tips and hints for making the task
easier.
A section whose title has one of the following sym-
bols are applicable only to those discs represented
by the symbol.
Cleaning Discs
Fingerprints and dust on the disc can cause poor pic-
ture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
DVD ALL All DVD discs listed below.
VR
-RW
DVD-RW with VR recording mode
DVD-RW with Video recording mode
Video
-RW
RAM DVD-RAM disc
+RW DVD+RW disc
-R DVD-R disc
+R DVD+R (DL) disc
DVD DVD-Video disc
DivX DivX files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
VCD Video CDs
ACD Audio CDs
MP3 MP3 files
WMA WMA files
JPEG JPEG files
Moisture Condensation
Never operate this product immediately after mov-
ing it from a cold location to a warm location. Leave
it for two or three hours without operating it. If you
use this product in such a situation, it may damage
discs/tapes and internal parts.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Recordable and Playable Discs
DVD-RW (DVD - ReWritable)
ꢀ DVD-RW discs can be formatted for VR mode recording or Video mode recording.
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
[VR mode]
ꢀ Recordings can be extensively edited
ꢀ Playable only on VR mode compatible players (after finalization)
[Video mode]
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-R (DVD - Recordable)
ꢀ These Discs can be recorded only once. After you finalize a DVD-R, you cannot record on it or edit it.
ꢀ DVD-R discs can be only formatted to Video mode.
ꢀ Playable on regular DVD players (after finalization)
ꢀ Limited editing features
DVD-RAM (DVD - Random Access Memory)
ꢀ DVD-RAM discs can be formatted for VR mode recording.
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
ꢀ Playable on DVD-RAM compatible players.
ꢀ Recordings can be extensively edited.
ꢀ Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
ꢀ You cannot use the cartridge-type DVD-RAM disc in this unit.
DVD+RW (DVD+ ReWritable)
ꢀ These Discs can be recorded on repeatedly. Recordings can be erased, then you can record again on the
same Disc.
ꢀ Playable on DVD+RW compatible players (automatically finalization)
ꢀ The edited contents are playable on DVD+RW compatible players only after finalization.
ꢀ Recordings can be edited the title/chapter
DVD+R (DVD + Recordable)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R, you cannot record on it or edit it any
more.
ꢀ Playable on DVD+R compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine, added
chapter mark, etc.)
ꢀ Limited title/chapter editing features.
DVD+R DL (DVD + Recordable; Double Layer)
ꢀ These Discs can be recorded only once. After you finalize a DVD+R DL, you cannot record on it or edit it any
more.
ꢀ Storage space is nearly doubled with double layer DVD+R media, allowing consumers to record up to 8.5GB
of video on a single DVD+R DL disc.
ꢀ Playable on DVD+R compatible players (after finalization)
ꢀ Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter combine, added
chapter mark, etc.)
ꢀ Limited title/chapter editing features.
Recommended recordable DVD discs
DVD-R
DVD+R
DVD-RW
Mitsubishi (4x)
Verbatim (4x)
JVC (4x)
DVD+RW
Mitsubishi (4x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
DVD+R DL
DVD-RAM
Mitsubishi (8x, 16x)
Mitsubishi (8x, 16x)
Mitsubishi (2.4x, 8x)
Fujifilm (2x)
That’s (8x, 16x)
Ricoh (8x, 16x)
Maxell (2.4x)
Mitsubishi (3x)
Verbatim (8x)
Verbatim (8x)
-
-
-
Maxell (5x)
-
-
-
-
Victor (4x)
-
-
Maxell (4x)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable Discs
DVD (8 cm / 12 cm disc)
Discs such as movies that can be purchased or rented
Video CD (VCD) (8 cm / 12 cm disc)
VIDEO CDs or CD-Rs/CD-RWs in VIDEO CD/Super VIDEO CD format
Audio CD (8 cm / 12 cm disc)
Music CDs or CD-Rs/CD-RWs in music CD format that can be purchased
CD-R/CD-RW (8 cm / 12 cm disc)
CD-R/CD-RW discs that contain audio titles, MP3, WMA, JPEG or DivX files.
Notes:
•
Depending on the conditions of the recording equipment or the CD-R/RW (or DVD R/RW) disc itself, some
CD-R/RW (or DVD R/RW) discs cannot be played on the unit.
•
•
•
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD R/RW)
may not be playable.
•
•
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD
Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder’s
lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are
cases in which it may not play because of the settings of the application software used to create the disc.
(Check with the software publisher for more detailed information.)
•
•
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different
types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from
the Internet. Our company has no right to grant such permission. Permission should always be sought
from the copyright owner.
Regional Code
This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as
the rear of the unit or “ALL”.
Notes on Regional Codes
•
Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number
must match your unit’s regional code or the disc cannot play.
•
If you try to play a DVD with a different regional code from the unit, the message “Check Regional Code”
appears on the TV screen.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions on video recording
•
You cannot record copy-protected video using this recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected material is encountered during a recording, recording
will pause or stop automatically and an error message will be displayed on-screen.
•
Video that is ‘copy-once only’ can only be recorded using a DVD-RW disc in VR mode or DVD-RAM disc
with CPRM (see below).
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system) only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for Recordable Media.
This Recorder is CPRM compatible, which means that you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM recordings can only be made on DVD-RW discs format-
ted in VR mode or DVD-RAM discs, and CPRM recordings can only be played on players that are specifically
compatible with CPRM.
Copyright
•
Recording equipment should be used only for lawful copying and you are advised to check carefully what is
lawful copying in the area in which you are making a copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception or consented to by the rights owner.
•
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only, unless otherwise authorized by Macrovision corporation.
Reverse engineering or disassembly is prohibited.
Notice for Progressive Scan Use
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPAT-
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 525 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH
THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING
YOUR TV SET COMPATIBILITY WITH THIS MODEL 525p VCR/DVD RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Useable Memory Cards
Using Memory Card
•
•
•
•
Compact Flash Card (CF)
1. Insert a memory card.
Micro Drive (MD), ST1 MD
Secure Digital Card (SD), Mini SD
2. Press HOME on the Remote Control.
3. Select [Music] or [Photo] option.
Multi Media Card (MMC), MMC Plus, RS MMC,
MMC Mobile
4. Select [MEMORY CARD] then press ENTER.
The Memory Card slot choice menu appears on
the TV screen.
•
•
xD-Picture Card (xD)
Memory Stick (MS), MS Duo, MS Pro, MS Pro
Duo
•
Compatible with: FAT 12, FAT 16, or FAT 32
Only use the memory cards recommended above.
Regarding Write Protect
For cards that have a write protect switch, if the
switch is on it will not be possible to write or erase
the card.
5. Use v/V to select the desired Memory Card slot
Inserting/Removing the Memory Card
then press ENTER.
Notes:
•
For details on each operation item, refer to relevant
pages.
•
If a memory card has not been inserted to a slot, the
slot is not selectable on the Memory Card slot choice
menu.
Insert CF, MD or ST1 MD card
Insert SD, Mini SD, MMC, MMC Plus,
RS MMC, MMC Mobile, xD, MS,
MS Duo, MS Pro or MS Pro Duo card
Inserting the card
Insert straight-in until it fits into place.
Removing the card
Upper slot : Press on the center of the card then
withdraw the card carefully.
Lower slot : Withdraw the card carefully.
Notes:
•
•
•
Keep the memory card out of reach of children. If
swallowed, seek medical advice immediately.
Some memory cards may not work in this
recorder, depending on the formatting.
Do not extract the memory card while
operating (play, copy, etc.).
Battery installation
Detach the battery cover on the rear
About the Remote Control
Operation Range
of the Remote Control, and insert two
(R03/AAA) size batteries with 3 and
# aligned correctly.
Point the Remote Control at the remote sensor and
press the buttons.
Distance: About 23 ft (7 m) from the front of the
Do not mix old and new batteries and never
mix different types of batteries such as stan-
dard, alkaline, etc.
remote sensor.
Angle:
About 30° in each direction of the front of
the remote sensor.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d
e fg
hij k l
m
n o p q r
s
The DVD deck is selected.
a
b
c
d
e
f
g
Disc Tray (DVD deck)
Insert a disc here.
DVD
VCR
Lights when recorder is in playing mode
or flashes when search mode.
Z DVD
Opens or closes the disc tray.
The VCR deck is selected.
Cassette Compartment (VCR deck)
Insert a video cassette here.
Indicates when the recorder is in timer
recording or a timer recording is
programmed.
Z VCR
Ejects the tape in the VCR deck.
1 POWER
Switches the Recorder ON and OFF.
A VHS tape is inserted in the VCR deck.
The recorder is recording.
REC
PM
MEMORY CARD Slot 1
Insert a memory card (CF, MD or ST1 MD)
Indicates PM time. (AM is not displayed.)
Indicates that TV mode is active.
MEMORY CARD Slot 2
Insert a memory card (SD, Mini SD, MMC,
MMC Plus, RS MMC, MMC Mobile, xD, MS,
MS Duo, MS Pro or MS Pro Duo).
TV
Indicates total playing time,
elapsed time, remaining time
or current deck status.
h
N / X (PLAY / PAUSE)
Starts playback.
Pause playback or recording temporarily,
press again to exit pause mode.
n
o
Remote Sensor
Point the recorder Remote Control here.
DVD/VCR
i
j
x (STOP)
Stops playback.
Toggles control between the DVD deck and the
VCR deck.
z (REC)
Starts recording.
Press repeatedly to set the recording time.
p
RES.
Sets the HDMI’s output resolution to 1080i,
720p, 480p or 480i formats for your TV or
Monitor.
Set the Component video output’s resolution to
480p or 480i format for your TV or Monitor.
k
l
m
CH (v/V)
Scans up or down through memorized
channels.
q
r
DV IN
DUBBING
Connect the DV output of a digital camcorder.
S-VIDEO
Connect the S-Video output of an external source
(TV/ Monitor, VCR, Camcorder, etc.).
Press to copy DVD to VCR (or VCR to DVD).
Lights when the Recorder is dubbing.
Display window
Shows the current status of the Recorder.
s
VIDEO /AUDIO (Left/Right)
Connect the audio/video output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
Lights when a disc is in the DVD deck.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
VCR
ENTER (ꢁ)
Select the Recorder’s function mode to
VCR.
Confirms menu selections.
DISPLAY
Accesses On-Screen Display.
Displays information of current status.
INPUT
Changes the input to use for recording
(Tuner, AV1, AV2, or DV IN).
RETURN (O)
Removes the menu.
a
0-9 numerical buttons
- Selects numbered options in a menu.
- Inputs channel numbers.
ꢀ ꢀ ꢀ ꢀ ꢀ
d
ꢀ ꢀ ꢀ ꢀ ꢀ
I.SKIP (INSTANT SKIP)
Skips 30 seconds forward during
playback.
AUDIO
Selects an audio language or an audio
channel.
DUBBING
Press to copy DVD to VCR (or VCR to
DVD).
SUBTITLE
b
c
Selects a subtitle language.
TV Control Buttons
See page 51.
ZOOM
Enlarges DVD video image.
CHP. ADD
Inserts a chapter marker when playing/
recording.
ꢀ ꢀ ꢀ ꢀ ꢀ
b
ꢀ ꢀ ꢀ ꢀ ꢀ
BACKWARD / FORWARD
z REC
Starts recording. Press repeatedly to
set the recording time.
(m/M)
-
DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape
during the STOP mode, for fast
reverse/ forward picture search.
REC MODE
Selects the recording mode:
- DVD : SP, LP, EP or XP.
- VCR : SP or SLP.
SKIP (. / >)
Go to next chapter or track. Returns to
beginning of current chapter or track or
go to previous chapter or track.
TITLE
Displays the disc’s Title menu, if
available.
d
PAUSE/STEP (X)
Pause playback or recording
temporarily.
Press repeatedly for frame-by-frame
playback.
THUMBNAIL
Selects a thumbnail picture for the
current title for use in the Title List
menu.
PLAY MODE
Selects play mode.
PLAY (N)
Starts playback.
MARKER
Marks any point during playback.
STOP (x)
Stops playback or recording.
SEARCH
Displays Marker Search menu.
CLEAR
Removes a mark on the Marker
Search menu.
ꢀ ꢀ ꢀ ꢀ ꢀ
c
ꢀ ꢀ ꢀ ꢀ ꢀ
HOME : Accesses or removes the
HOME menu.
ꢀ ꢀ ꢀ ꢀ ꢀ
a
ꢀ ꢀ ꢀ ꢀ ꢀ
TV/VCR
To view channels selected by the VCR
tuner or by the TV tuner.
DISC MENU/LIST
POWER (1)
Accesses menu on a DVD disc, Title
List or Playlist menu.
TIME SHIFT
Turns Recorder ON and OFF.
To play the title being recorded
and also currently being recorded
appears as PIP.
EJECT, OPEN/CLOSE (Z)
- Opens and closes the disc tray.
- Ejects the tape in the VCR deck.
CH/TRK(v/V)
Selects a channel. Adjusts manually
the tape’s picture onscreen.
RESOLUTION : Sets the output
resolution for HDMI and
Component video out.
DVD
b B v V (left/right/up/down)
Selects menu options.
Select the Recorder’s function mode to
DVD.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
a
b
c d
e
f
g
h
i
j
k
l
a
b
c
ANT. IN
g
h
Cooling fan
Connect the antenna to this terminal.
AC Power Cord
Plug into the power source.
S-VIDEO OUT
Connect to a S-Video Input on TV.
i
j
k
RF. OUT
Connect to a TV with RF coaxial inputs.
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
COAXIAL (DIGITAL AUDIO OUT jack)
Connect to digital (coaxial) audio equipment.
d
e
AUDIO OUT (Left/Right)
Connect to a TV or other equipment with audio
inputs.
AV OUT (VIDEO OUT / AUDIO OUT
(Left/Right))
Connect to a TV with video and audio inputs.
AV IN 1 (VIDEO IN /AUDIO IN (Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, VCR,
Camcorder).
l
HDMI OUT
HDMI output providing a high quality interface
for digital audio and video.
f
OPTICAL (DIGITAL AUDIO OUT jack)
Connect to digital (optical) audio equipment.
Caution
Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause
permanent damage to the unit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup and Settings
Depending on your TV and other equipment
there are various ways you can connect the
recorder. Please refer to the manuals of your
TV, VCR, Stereo System or other devices as
necessary for additional connection informa-
tion.
a
Antenna
Antenna
OR
OR
Notes:
•
Make sure the Recorder is connected directly to the TV
and tune the TV to the correct video input channel.
•
Do not connect the Recorder’s AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Do not connect the Recorder via another VCR. The
DVD image could be distorted by the copy protection
system.
•
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. Position the units
away from each other or turn off the unit after removing
the disc.
Rear of Recorder
b
Connecting an Antenna
or Cable TV
To view or record a CATV channel
a Antenna:
1. Tune the TV to the Recorder output channel (CH
3 or 4).
Disconnect the antenna from the rear of the TV and
identify the antenna cable. If it is a round 75 ohm
coaxial cable connect it directly to the jack marked
ANT. IN on your Recorder. If your antenna cable is
flat connect it to a 300-ohm to 75-ohm antenna
adaptor (not supplied) and slip the adaptor over the
ANT. IN jack. Don’t attempt to screw it into to the
Recorder.
2. Set the Recorder channel selector to the cable
output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one program
while viewing another.
b
Cable TV:
•
If you are using a cable box to tune channels, it is not
necessary to do Auto Channel Set.
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT. IN jack on the Recorder.
If a converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter,
and a coaxial cable from the OUT connector on the
converter to the ANT. IN on your Recorder. This cable
hookup permits both TV and Recorder operation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Connections to your TV
•
•
•
•
Set the resolution to 480p using RESOLUTION or RES.
button for progressive signal.
Make one of the following connections, depending on
the capabilities of your TV.
Progressive Scan does not work with the RF,
Audio/Video or S-Video connections.
RF coaxial connection
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled.
Connect the RF OUT jack on the Recorder to the
antenna in jack on the TV using the supplied 75-ohm
Coaxial Cable (R).
If the resolution is set to 720p or 1080i, the VIDEO OUT,
S-VIDEO OUT and COMPONENT VIDEO OUT connec-
tions are not available.
How to set the Recorder’s RF output channel
Audio connection
Connect the Left and Right AUDIO OUT jacks on the
Recorder to the audio left/right in jacks on the TV
using the supplied audio cables (A1 or A2).
1. When the Recorder is turned off, press and hold
CH (V/v) on the front panel for more than five
seconds. [RF03] or [RF04] appears in the display
window.
Rear of TV
2. Press CH (V/v) to change the RF output channel
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
S-VIDEO
INPUT
(RF03 or RF04).
R
L
Y
Pr
Pb
3. Tune the TV to this channel.
A2
C
S
Video connection
Connect the VIDEO OUT jack on the Recorder to the
video in jack on the TV using the video cable
supplied (V).
Rear of Recorder
Note:
If you use this connection, set the TV’s source selector to
VIDEO.
S-Video connection
Connect the S-VIDEO OUT jack on the Recorder to
the S-Video in jack on the TV using an optional
S-Video cable (S).
R
V
A1
Component Video / Progressive Scan
connection
Rear of TV
If your television is a high-definition or “digital ready”
television, you may take advantage of the Recorder’s
progressive scan output for higher video resolution.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT jacks on the Recorder to the correspon-
ding in jacks on the TV using an optional Y Pb Pr
cable (C).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI compatible TV
HDMI
HDMI connection
If you have a HDMI TV or monitor, you can connect it
to this recorder using a HDMI cable.
H
1. Connect the HDMI OUT jack on the recorder to
the HDMI jack on a HDMI compatible TV or moni-
tor (H).
2. Set the TV’s source to HDMI (refer to TV’s
Owner’s manual).
Notes:
•
If your TV is NOT capable of handling 96 kHz
sampling frequency, set the [Sampling Freq.]
option to [48 kHz] on the setup menu (See page
23). When this choice is made, this unit will auto-
matically convert any 96 kHz signals to 48 kHz so
your system can decode them.
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection
for use with DVD Players, Set-Top Boxes, and other
AV devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
•
•
If your TV is not equipped with Dolby Digital and
MPEG decoder, set the [Dolby Digital] and
[MPEG] options to [PCM] on the setup menu (See
page 22).
If your TV is not equipped with DTS decoder, set
the [DTS] options to [OFF] on the setup menu
(See page 22). To enjoy DTS multi channel sur-
round, you must connect this recorder to a DTS
compatible receiver via one of this recorder’s digi-
tal audio outputs.
HDMI has the capability to support standard, enhanced,
or high-definition video plus standard to multi-channel
surround-sound audio, HDMI features include uncom-
pressed digital video, a bandwidth of up to 5 gigabytes
per second, one connector (instead of several cables
and connectors), and communication between the AV
source and AV devices such as DTVs.
•
The arrow on the cable connector body should
face up for correct alignment with the connector
on the recorder.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
(Type A)
Additional Information for HDMI
•
When you connect a HDMI or DVI compatible
device make sure of the followings:
•
If there is noise or lines on the screen, please
check the HDMI cable.
- Try switching off the HDMI/DVI device and this
recorder. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then switch
on this recorder.
Tip :
When you use HDMI connection, you can change the
resolution (480i, 480p, 720p, or 1080i) for the HDMI
output using RESOLUTION or RES. button.
- The connected device’s video input is set
correctly for this unit.
Note:
-
The connected device is compatible with
720(1440)x480i, 720x480p, 1280x720p or
1920x1080i video input.
Changing the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it on again or change the
resolution.
•
•
Not all HDCP-compatible DVI devices will work
with this recorder.
The picture will not be displayed properly with
non-HDCP devices.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection to an Amplifier
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic II/Pro
Logic
Rear of Recorder
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the Recorder to
the audio left and right in jacks on your amplifier,
receiver, or stereo system using the audio cables (A)
supplied.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)
1. Connect one of the Recorder’s DIGITAL AUDIO
OUT jacks (OPTICAL O, COAXIAL X) to the
corresponding in jack on your amplifier. Use an
optional digital (OPTICAL O, COAXIAL X) audio
cable.
O
X
A
2. You will need to activate the Recorder ’s digital
output. (See [Audio Settings] on page 22).
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your Recorder (MPEG 2,
Dolby Digital and DTS). Check the receiver manual
and the logos on the front of the receiver.
L
R
COAXIAL
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
Notes:
•
Due to the DTS Licensing agreement, the digital
output will be in DTS digital out when DTS audio stream
is selected.
DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.
•
•
If the audio format of the digital output does not match the
capabilities of your receiver, the receiver will produce a
strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connec-
tion can only be obtained if your receiver is equipped
with a Digital Multi-channel decoder.
•
•
To see the audio format of the current DVD in the on-
screen display, press AUDIO.
This Recorder does not perform internal (2 channel)
decoding of a DTS sound track. To enjoy DTS multi
channel surround, you must connect this Recorder to a
DTS compatible receiver via one of this Recorder’s digi-
tal audio outputs.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a Digital
Camcorder
Accessory Audio/Video (A/V)
Recorder
Connections to
Connect the AV IN 1 or AV IN 2 jacks on the
Recorder to the audio/video out jacks on your acces-
sory component, using the optional audio/video
cables. (Refer to page 41 for [Recording from
External Components].)
Use a DV cable (not supplied) to connect the DV
in/out jack of your DV Digital Camcorder to the front
panel DV IN jack of this Recorder.
Note:
This jack is for connection to DV equipment only. It is
not compatible with digital satellite tuners or D-VHS
video decks.
Note:
If you use the S-VIDEO jack on the front panel, the
VIDEO IN jack on the front panel is not available.
DV
IN/OUT
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Select [Auto] or [Manual] Clock Set option then
press ENTER.
Initial Setup Wizard
When POWER is pressed for the first time to turn the
unit on, the Initial Setup Wizard function sets the
Language, Channels and Clock.
1. Use v / V to select a language for the Setup
menu and information display and then press
ENTER.
Auto
1. Use v / V to choose your Time Zone
manually.
2. Use B to choose the [Daylight Savings]
option. Use v / V to choose Auto, ON, or
OFF.
3. Press ENTER to confirm your setting.
2. Check your antenna connections.
Manual
Press B to move next step.
1. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
2. Press ENTER to confirm your setting.
5. Press ENTER to complete the Setup Wizard.
3. Press ENTER to begin the channel search.
Note:
You can reset the Initial Setup Wizard from the
[Factory Set] in the setup menu.(see page 22).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Menu
Using the Home Menu
From the Home Menu screen you can access all the
Media for playback and recording of the recorder.
•
•
•
•
Dubbing : Displays [Dubbing] menu.
Disc Manager : Displays Disc Setup menu.
Rec. Mode : Displays Record Mode setup menu.
DV Input : Change to DV Input mode.
1. Press HOME and the Home menu appears.
2. Use b / B to select the desired main option.
Initial Settings
3. Use v / V to select the desired Sub option then
press ENTER to confirm your selection.
In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings.
4. To exit the HOME menu, press HOME.
Setup
1. Press HOME and the Home menu appears.
2. Select [Setup] > [Start] and press ENTER.
•
Start: Displays Setup menu.
TV
•
Auto Ch. Scan : Displays [Auto Channel Set]
menu. (See page 21)
•
•
Ch. Edit : Displays [CH. Add/Del] menu.
(See page 21)
Timer Record : Displays [Timer Record] menu.
(See page 38)
3. Use v / V to select the desired option.
Movie
4. While the desired item is selected, press B to
•
VCR: Plays back VHS cassette.
move to the second level.
•
DISC:
5. Use v / V to select the second desired option.
-
Displays TITLE LIST menu for recordable disc
(page 43)
6. Press B to move to the third level.
-
-
Displays Movie menu for DivX disc. (page 32)
Plays back Video CD or DVD-Video disc
(page 29-31).
7. Use v / V to select the desired setting then press
ENTER to confirm your selection.
Some items require additional steps.
8. Press RETURN (O) or HOME to exit the Setup
Photo (See page 34)
menu.
•
DISC: Displays [Photo] menu for disc.
Note:
•
MEMORY CARD : Displays the memory card slot
Press b to go back to the previous level.
choice menu.
Music (See page 33)
•
DISC: Displays Music (or Audio CD) menu for
disc.
•
MEMORY CARD : Displays the memory card slot
choice menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
To Add or Erase Channels
This feature allows you to add to or erase channels
from memory manually.
General Settings
Tuning Band Select
1. Select the [CH. Add/Del] option.
1. Select the [Tuning Band] option then press B .
2. Press B to move to the third level.
2. Use v / V to select the tuning band (TV or
CATV) option then press ENTER.
TV: If you are using a standard antenna to receive
channels.
[Edit] icon is highlighted.
3. Press ENTER and the Channel Edit menu
appears.
CATV: If you are using basic cable to receive
channels.
4. Use v / V or number buttons to select a channel
then press B.
5. If you want to obtain a clearer picture, tune the
[MFT] option using v / V then press B.
[Add] or [Delete] icon is highlighted.
6. Press ENTER to confirm your setting.
7. Repeat steps 4-6 to add or erase additional
channels.
Auto Channel Set
Connect the Recorder to the desired type of antenna
or cable TV system as shown on page 14.
8. Press HOME or RETURN (O) to exit the menu.
This Recorder is equipped with a frequency synthe-
sized tuner capable of receiving up to 181 channels.
These include VHF channels 2-13, UHF channels 14-
69 and CATV channels 1-125.
Clock Set
Auto
In the Auto option, the Recorder looks for a chan-
nel carrying XDS (Extended Data Services) infor-
mation. XDS updates the clock using the
Coordinated Universal Time.
1. Select the [Auto Channel Set] option.
2. Press B to move to the third level.
[Start] icon is highlighted.
1. Select the [Clock Set] > [Auto] option.
2. Press ENTER.
3. Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner’s memory.
3. Use v / V to choose your Time Zone
manually. When Timezone is set to Auto,
the Recorder will use XDS information to
determine the proper setting.
Note:
After the Auto Channel Set proceeding is complete,
make sure the Tuning Band is set appropriately (TV
or CATV) on tuning band, follow steps 1~2 as shown
previous (Tuning Band Select) to choose the correct
Tuning Band (TV or CATV).
4. Use B to choose the [Daylight Savings]
option.
Use v / V to choose Auto, ON, or OFF.
When it is set to Auto, the Recorder will use
XDS information to determine the proper set-
ting.
5. Press ENTER to confirm your setting.
6. Press HOME to exit the Setup menu.
Note :
The Auto Clock Feature enables the Recorder to
set up the clock when the Recorder is turned off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual
If your local TV station does not send date and
time information, or sends incorrect information,
you can set the clock manually.
1. Select the [Clock Set] > [Manual] option.
2. Press ENTER.
3. Enter the necessary information for year, date
and time.
b / B (left/right): Moves the cursor to the
previous or next column.
v / V (up/down): Changes the setting at the
current cursor position.
Disc Menu / Audio / Subtitle
[Original] : Refers to the original language in
which the disc was recorded.
4. Press ENTER to confirm your setting.
5. Press HOME to exit the Setup menu.
[Others] : To select another language, press
number buttons to enter the corresponding 4-digit
number according to the language code list in the
reference chapter (see page 52). If you enter the
wrong language code, press CLEAR.
TV Aspect
4:3 Letter Box:
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[OFF] (for Disc Subtitle) : Turn off Subtitle.
4:3 Pan Scan:
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
Audio Settings
16:9 Wide:
Select when a 16:9 wide TV is connected.
Each DVD disc has a variety of audio output options.
Set the Recorder’s Audio Output according to the
type of audio system you use.
Power Save Mode
Set Power Save Mode to [ON] to place your
Recorder into an economic power save mode.
Dolby Digital / DTS / MPEG
[Bitstream]: Select [Bitstream] if you connect the
DVD+VCR’s DIGITAL AUDIO OUT jack to an
amplifier or other equipment with a Dolby Digital,
DTS or MPEG decoder.
Factory Set
You can reset the Recorder to its original factory
settings.
[PCM] (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifi-
er. DVDs encoded in Dolby Digital or MPEG will
be automatically downmixed to two-channel PCM
audio.
1. Select the [Factory Set] option.
2. Press B to select [SET] then press ENTER.
3. Select [OK] and press ENTER.
[OFF] (for DTS): If you select [OFF], the DTS
signal is not output through the DIGITAL AUDIO
OUT jack.
4. Follow the Initial Setup Wizard on page 19.
Language Settings
Display Menu
Select a language for the Setup menu and
information display.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select a rating from 1 to 8 using the v / V buttons.
Sampling Freq. (Frequency)
[1]-[8] : Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
If your receiver or amplifier is NOT capable of han-
dling 96 kHz signals, select 48 kHz. When this choice
is made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
[No Limit] : If you select [No Limit], parental
control is not active and the disc plays in full.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
4. Press ENTER to confirm your rating selection,
then press HOME to exit the menu.
Note:
Check the documentation for your amplifier to verify
its capabilities.
If you set a rating for the recorder, all disc scenes with the
same rating or lower are played. Higher rated scenes are
not played unless an alternate scene is available on the
disc. The alternative must have the same rating or a lower
one. If no suitable alternative is found, playback stops. You
must enter the 4-digit password or change the rating level in
order to play the disc.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic presen-
tation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the quietest ones). This allows
you to listen to a movie at a lower volume without los-
ing clarity of sound. Set DRC to [ON] for this effect.
Set Password
You can enter or change password.
1. Select [Set Password] option then press B.
2. Follow step 2 as shown [Rating].
To change the password, select the [Change],
press ENTER and input the new 4-digit code.
Input it again to verify.
3. Press HOME to exit the menu.
If you forget your password
If you forget your password you can clear it using the
following steps:
Lock (Parental Control)
Settings
1. Press HOME and the Home menu appears.
Rating
2. Select [Setup] > [Start] and press ENTER.
3. Input the 6-digit number [210499]. The message
appears, select [OK] then press ENTER. The
security code is cleared.
Blocks playback of rated DVDs based on their
content. Not all discs are rated.
1. Select [Rating] option then press B.
4. Enter a new code as described above.
Area Code
Enter the Area Code whose standards were used to
rate the DVD video disc, based on the list in the
reference chapter (see page 52).
1. Select [Area Code] option then press B.
2. Follow step 2 as shown [Rating].
3. Select the first character using v / V buttons.
4. Shift the cursor using B buttons and select the
2. To access the Rating, Password and Area Code
features, you must input the 4-digit security code
you created.
second character using v / V buttons.
5. Press ENTER to confirm your area code
selection, then press HOME to exit the menu.
If you have not yet entered a security code you are
prompted to do so. Input a 4-digit code. Enter it
again to verify. If you make a mistake press CLEAR.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Settings
Disc Settings
Disc Record Mode
Initialize
You can set the picture quality for recording;
XP (Excellent quality), SP (Standard quality), LP (Low
quality), EP (Extend quality).
If you load a completely blank disc, the recorder will
initialize the disc.
•
DVD-R: The recorder initialize the disc to Video mode.
The recording mode will always be Video mode.
•
DVD-RW/DVD+RW/DVD+R(DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
ENTER. DVD-RW disc is initialized to Video mode.
Also, you can reformat the DVD-RW/DVD+RW/
DVD-RAM from the Setup menu as below.
1. Select the [Disc Record Mode] option then press
B.
2. Use v / V to select a desired Disc Record Mode
(XP, SP, LP or EP).
3. Press ENTER to confirm your selection, then
press HOME to exit the menu.
1. Select the [Initialize] option then press B.
[Start] icon is highlighted.
2. Press ENTER.
VCR Record Mode
•
In case of DVD-RW, use b / B to select a
desired Disc Initialize Mode (VR Mode or Video
Mode) then press ENTER.
You can set the picture quality for VCR recording;
SP (Standard Play), SLP (Super Long Play).
•
In case of DVD+RW/DVD-RAM, use b / B to
select [OK], and press ENTER.
It takes a few moments to format the disc.
DV Record Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN jack. Some digital camcorders have two stereo
tracks for audio. One is recorded at the time of shoot-
ing; the other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used. On the Audio 2 setting, the
overdubbed sound is used.
Note:
If you want to change the disc format, everything
recorded on the disc will be erased.
Auto Chapter
During recording, chapter markers are added auto-
matically at fixed intervals. You can set this interval to
5 minutes or 10 minutes. To turn off automatic chap-
ter marking, select [None].
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Finalize
Disc Protect
Finalizing ‘fixes’ the recordings in place so that the
disc can be played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
DISC MENU/LIST or TITLE.
Depending on the type of disc you are using, Disc
Protect allows you to preserve your recordings in a
variety of ways:
•
DVD+RW : Prevents editing, erasing,
overwriting of existing recordings and regular
recording.
1. Select the [Finalize] option then press B.
2. Press ENTER while [Finalize] is selected.
Finalize menu appears.
•
DVD+R/DVD-RW (VR mode)/DVD-RAM :
Prevents editing, erasing and regular recording.
Notes:
3. Select [OK] then press ENTER.
The Recorder starts finalizing the disc.
•
Disc Protect is not compatible with DVD-RW discs in
Video mode or DVD-R discs.
•
If you need to unlock a disc to make edits, select [OFF].
Notes:
•
Once you have finalized a DVD-R and DVD+R (DL)
disc, you cannot edit or record anything else on that
disc except DVD+RW. However, you can record and
edit a DVD-RW disc by choosing [Unfinalize] option.
PBC
PBC stands for Playback Control and refers to special
menus and navigation features that are available on
some Video CDs.
[ON]: Video CDs are played according to the PBC, if
available.
•
•
Finalization can take up to 3-4 minutes or more depend-
ing on the type of disc, how much is recorded on the
disc, and the number of titles on the disc.
DVD+R DL disc can take up to 30 minutes to finalize.
[OFF]:Video CDs are played the same way as Audio
CDs.
Tips:
•
If you load a DVD-RW that has already been finalized,
AutoPlay
you can ‘Unfinalize’ it by choosing [Unfinalize] from the
Finalize menu. After doing this, you can edit and re-
record onto the disc.
When you load a DVD with AutoPlay turned on, the
Recorder will bypass the Disc menu and trailers and
start playing the movie automatically.
•
•
You cannot unfinalize a DVD-R, DVD+R (DL) and
DVD+RW disc.
Set [AutoPlay] to [ON] or [OFF].
If [Disc Protect] option is set to [ON], the finalize is not
available. To finalize, set [Disc Protect] option to [OFF].
DivX Registration Code
DivX
We provide you the DivX® VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX® VOD service. For more
Disc Label
Use the Disc Label feature to enter a name for the
disc. This name appears when you load the disc and
when you display disc information on-screen.
1. Select [About DivX(R)] option then press B.
2. Press ENTER while [Enter] is selected and the
registration code will appear.
•
•
The Disc label can be up to 32 characters long.
For discs formatted on a different Recorder, you
will see only a limited character set.
3. Use the registration code to purchase or rent the
videos from Divx® VOD service at
download the video onto a disc for playback on
this unit.
1. Select the [Disc Label] option then press B.
[Edit] icon is highlighted.
2. Press ENTER.
Keyboard menu appears.
To enter characters, see page 47.
Note:
All the downloaded videos from DivX® VOD can only
be played back on this unit.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying Disc Information
on-screen
General Explanation of
On-Screen Display
You can display various information about the disc or
tape loaded on-screen. Some items can be changed
using the menu.
Some DVDs require specific operation or allow only
limited operation during playback. When this occurs,
is displayed, action prohibited or not available.
1. Press DISPLAY once to show current status.
Example: DVD-Video disc
Displaying Information While
Watching TV
While watching TV, press DISPLAY to display/
remove the information displayed on-screen.
e.g., when DVD-RW in VR mode is inserted.
2. Press DISPLAY once again to show various
playback information.
Indicates disc name and format.
Indicates channel
The items displayed differ depending on the disc
type or playing status.
number and audio
input signal received
by the tuner.
progress bar.
Indicates the record mode,
free space, and elapsed time
Indicates output audio signal.
Indicates current date and time.
Indicates operational mode of the recorder.
3. You can select an item by pressing v / V and
change or select the setting by pressing b / B.
For details about each item, see the pages in
parentheses.
Changing TV Audio Channel
Some TV programs are broadcast with both a main
and a Secondary Audio Program (SAP). You can
change the TV audio.
Press AUDIO repeatedly to change the TV audio,
according to Broadcast audio signal as shown below.
•
[Title]: Current title (or track) number/total
number of titles (or tracks) (page 29)
[Chapter]: Current chapter number/total
number of chapters (page 29)
•
•
•
[Time]: Elapsed playing time (page 31)
[Audio]: Selected audio language (DVD
VIDEO only) or audio channel (page 30)
[Subtitle]: Selected subtitle (page 29)
[Angle]: Selected angle/total number of angles
(page 31)
•
•
•
•
STEREO+SAP Audio Signal
Stereo → SAP → Mono → Stereo
STEREO Audio Signal
Stereo → L → R → Mono → Stereo
SAP Audio Signal
Mono → SAP → Mono
MONO Audio Signal
Mono
•
•
•
[Sound]: Selected sound mode (page 31)
The current audio channel is displayed
on-screen.
Note:
If no button is pressed for 10 seconds, the on-screen dis-
play disappears.
•
If SAP is selected, but there is no SAP channel
being broadcast, you will still hear the main audio
(Mono or Stereo) channel.
•
If the sound is poor quality when set to Stereo,
you can often improve it by changing to Mono.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
Playing a Tape
Playing a DVD or Video CD
1. Press VCR to control the VCR deck.
1. Press DVD to control the DVD deck.
2. Insert a pre-recorded video cassette.
2. Press OPEN/CLOSE (Z) to open the disc tray.
Load your chosen disc in the tray, with the
playback side down.
•
•
If the unit is powered off, it will power on
automatically when the tape is loaded.
3. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (N) or Starts playback
using HOME menu.
If the Timer indicator lights on the front panel
display window, press POWER once.
3. Press PLAY (N) to start playback.
•
If a tape without a safety tab is inserted the
unit starts playback automatically.
4. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. “Xx” appears on the screen briefly.
4. Press STOP (x) to stop playback.
Press PLAY (N) to resume playback (from the
scene point). If you press STOP (x) again or
unload the disc (“x” appears on the screen.), the
unit will clear the stopped point.
•
If the tape reaches the end before you press
STOP (x) the Recorder automatically stops,
rewinds and ejects the tape.
5. Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER (1), the disc tray closes
automatically and unit turns off.
Notes:
S-VHS Quasi Playback (SQPB)
•
This Recorder can play back S-VHS recorded
tapes, however, it cannot make recordings using
S-VHS format tapes.
Note:
•
SQPB is an abbreviation for S-VHS Quasi
Playback.
If parental control is set and the disc is not within the rating
settings you must input the password.
(See [Rating] on page 23).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Playback Features
Buttons
Operations
EJECT (Z)
Ejects the tape in the VCR deck.
Pause playback.
PAUSE/STEP (X)
Press repeatedly to step forward one frame at a time.
•
After 5 minutes in STILL mode the Recorder stops to protect
the tape and video heads.
FORWARD (M)
Scan forward.
In Stop mode, fast forwards the tape.
In Pause mode, starts slow motion playback.
•
•
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads
After 3 minutes in SLOW MOTION mode the Recorder goes back to PLAY mode to protect the
tape and video heads.
BACKWARD (m)
Scan backward.
In Stop mode, rewinds the tape.
•
After 3 minutes in SEARCH mode the Recorder returns to PLAY mode to protect the tape and
video heads.
CLEAR
Resets the current tape counter position to 0:00:00. To automatically goto tape counter
position 0:00:00, press RETURN while the tape is in Stop mode.
CH/TRK (v+ / V-)
AUDIO
Manually reduces noise on the screen during tape playback. Tracking is set
automatically when a tape is inserted.
Sets tape audio to HIFI, LEFT, RIGHT or NORMAL.
Use b/B buttons to select tape audio you want.
I.SKIP
Press repeatedly during playback to skip forward
30 seconds (maximum 180 seconds).
28
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD or Video CD Playback Features
Discs
Buttons
Operations
OPEN / CLOSE (Z) Opens or closes the disc tray.
All Discs
PAUSE/STEP (X)
Pause playback.
All Discs
Press repeatedly to play Frame-by-Frame.
You can also use b / B to step backward and forward
while in Pause mode.
DVD ALL VCD
•
This function is forward only for Video CD.
BACKWARD (m) / FORWARD (M)
During playback, press repeatedly to select the required
DVD ALL VCD DivX
ACD
scan speed.
- DVD; 5 steps,
- Video CD, DivX, Audio CD; 3 steps
DVD ALL VCD
In Pause mode, press BACKWARD (m) / FORWARD
(M) for slow motion playback.
- DVD; 4 steps,
- Video CD; 3 steps
•
This function is forward only for Video CD.
SKIP (. / >)
Press SKIP (> or .) briefly during playback to select
the next chapter/track or to return to the beginning of the
current chapter/track.
DVD ALL VCD DivX
ACD MP3 WMA
Press SKIP (.) twice in quick successions to step back
to the previous chapter/track.
•
To go directly to any chapter/track during
playback, press DISPLAY twice and use v / V to select
the chapter or track (for Video CD) icon. Input the
chapter/track number or use b / B.
•
•
On a Video CD with PBC, you must set PBC to [OFF]
in the Setup menu to use this function (See page 25).
On an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
playback.
ZOOM
Enlarge the video image.
DVD ALL
DVD
(x1 size → x2 size → x4 size → x1 size (normal size))
You can move through the zoomed picture using b B v V
buttons.
TITLE
If the current DVD title has a menu, the title menu appears
on the screen. Otherwise, the disc menu may appears.
DISC MENU/LIST
The disc menu appears on the screen.
DVD
SUBTITLE (
I.SKIP
)
During playback, press SUBTITLE then press b / B
repeatedly to select a desired subtitle language.
DVD DivX
Press repeatedly during playback to skip forward
30 seconds.
DVD ALL
29
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD or Video CD Playback Features (Continued)
Buttons
Operations
Discs
PLAY MODE
Select a desired play mode while playback.
[A-] : Repeats a sequence between A (Start point) and B
(End point) during playback. Press ENTER at your
chosen end point then the repeat sequence begins.
DVD ALL VCD ACD
Karaoke DVD
[CHAPTER] : Repeats the current chapter.
[TITLE] : Repeats the current title.
DVD ALL
DVD ALL Karaoke DVD
VR
VCD ACD -RW
[ALL] : Repeats the all titles/tracks.
[TRACK] : Repeats the current track.
[RANDOM] : Random playback
VCD ACD MP3 WMA
VCD Karaoke DVD
MP3 WMA
[Folder] : Repeats all the tracks on a folder of a disc.
[OFF] : Does not play repeatedly.
DVD ALL
•
•
•
On a Video CD with PBC, you must set PBC to [OFF]
in the Setup menu to use this function (See page 25).
If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
By pressing SKIP (>) during Random playback, the
Recorder selects another title (track) and resumes
Random playback.
AUDIO (
)
Press AUDIO then press b / B repeatedly to hear a
different audio language or audio track.
DVD
Note:
Some discs feature both Dolby Digital and DTS sound-
tracks. There is no analog audio output when DTS is
selected. To listen to the DTS soundtrack, connect this
recorder to a DTS decoder via one of the digital outputs.
See page 17 for connection details.
Press AUDIO then press b / B repeatedly during playback
to hear a different audio channel.
With DVD-RW discs recorded in VR mode that have both
a main and a Bilingual audio channel, you can switch
between Main (L), Bilingual (R), or a mix of both (Main +
Bilingual) by pressing AUDIO.
VR
Video
-RW
-RW
RAM
+RW -R
+R VCD
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Angle DVD
Special Playback Options
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press DISPLAY then select
the Angle icon during playback. Use b / B to select a
desired angle. Note that the number of the current
angle appears on the display.
If a menu screen is displayed DVD VCD
In some cases, the disc menu might appear instead.
DVD
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start. Press
TITLE or DISC MENU/LIST to return to the menu
screen.
Tip:
The Camera Angle icon is displayed on the TV screen when
alternate angles are available.
VCD
Use the number buttons to select the track you want
to view and press RETURN to return to the menu
screen. Menu settings and operating procedures may
differ. Follow the instructions on each menu screen.
You may also set PBC to [OFF] (See page 25).
3D Surround DVD ALL VCD DivX
This unit can produce a 3D Surround effect, which
simulates multi-channel audio playback from two
conventional stereo speakers, instead of the five or
more speakers normally required to listen to multi-
channel audio from a home theater system.
Time Search DVD ALL DivX
1. Press DISPLAY twice then use v / V to select the
sound icon. Then, use b / B to select [3D SUR.].
To start playing at any chosen time on the disc:
2. To turn off the 3D Surround effect, select
[NORMAL].
1. Press DISPLAY twice during playback. The time
search box shows the elapsed playing time.
2. Press v / V to select the time clock icon and
Last Scene Memory DVD
[-:--:--] appears.
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
This Recorder memorizes last scene from the last
disc that is viewed. The last scene remains in memo-
ry even if you remove the disc from the Recorder or
switch off the Recorder. If you load a disc that has
the scene memorized, the scene is automatically
recalled.
wrong numbers, press b B to move the under
/
bar (_) to the wrong number. Then enter the
correct numbers.
4. Press ENTER to confirm. Playback starts from the
selected time.
Notes:
•
•
Settings are stored in memory for use any time.
This Recorder does not memorize settings of a disc if
you switch off the Recorder before commencing to play
it.
Marker Search DVD ALL VCD
To enter a Marker
•
Last Scene Memory function for a previous DVD title is
erased once a different DVD title is played.
You can start playback from up to six memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears
on the TV screen briefly. Repeat to enter up to six
markers.
Finding Locations on a Disc VCD
You can directly access any point on a video CD
using this function within 95% of progress bar while
playing. This function will not work if any bookmarks
have been set.
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH.
The marker search menu appears on the screen.
1. Press SEARCH during playback.
2. Use b/B/v/V to select a marker scene that you
The progress bar appears on the TV screen.
want to recall or clear.
2. Use b / B to find the desired starting position for
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and use b / B
to select [OK] then press ENTER to delete
marked scene from the list.
playback.
3. Press ENTER to confirm the selected position.
Playback starts from the selected position.
4. To remove the Marker Search menu,
press RETURN (O).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press v / V to select an option, and press
Playing a DivX Movie File
ENTER.
The Recorder can play Divx files. Before playing DivX
files, read “About DivX movie files” on right.
• [Play] Start playback the selected title.
• [Open] Opens the folder and a list of files in the
folder appears.
1. Press HOME and the Home menu appears.
2. Select [Movie] > [DISC] and press ENTER.
3. Use v / V to select a folder, and press ENTER
twice.
• [Dubbing] Dubs the DivX movie to VCR.
(page 40)
A list of files in the folder appears.
4. Use v / V to select a file then press PLAY (N).
Playback starts.
About DivX movie files
Available resolution size
under 720x576 (W x H) pixel.
You can use variable playback functions. Refer to
pages 29-31.
Playable DivX file
“.avi”, “.divx”
Playable DivX subtitle
“.smi”, “.srt (SubRip only)”,
“.sub (Micro DVD format only)”,
ꢀ
DivX subtitle except those listed above is not
displayed on the TV screen.
Playable Codec format
“DIV3”, “MP43”, “DIVX”, “XVID”, “DX50”.
Playable Audio format
“AC3”, “PCM”, “MP2”, “MP3”, “WMA”.
5. Press STOP (x) to stop the playback. The Movie
menu appears.
ꢀ
Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
Bit rate: within 8 - 320kbps (MP3),
Note:
ꢀ
This recorder cannot play back the DivX file(s) in the
Memory card.
32 - 192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Notice for displaying the DivX subtitle
If the subtitle does not display properly, please follow
the steps below.
1. Press PAUSE/STEP (X) when the subtitle
appears.
2. Press and hold SUBTITLE about 3 seconds.
The language code will appear.
3. Press b / B to select another language code until
the subtitle is displayed properly.
4. Press PLAY (N) to continue playback.
Less than 1999 (total number of files and folders)
Notes on DivX format
ꢀ
The file name of the DivX subtitle is limited to
characters.
ꢀ
If there is impossible code to express in the
DivX file, it may be displayed as “_” mark on the
display.
ꢀ
If the number of the screen frame is over
Movie menu options
29.97 frames per second, this unit may not
operate normally.
1. Press v / V to select a folder/file on the Movie
menu then press ENTER.
ꢀ
If the video and audio structure of recorded
file is not interleaved, returns to the menu
screen.
Movie menu options appear.
ꢀ
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
GMC?
*
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There are different levels of GMC encoding,
usually called 1-point, 2-point, or 3-point GMC.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio CD and Music menu options
Playing an Audio CD or
MP3/WMA files
1. Press v / V to select a track/file or folder on the
Audio CD or Music menu then press ENTER.
The Recorder can play Audio CDs and MP3/WMA
files. Before playing MP3/WMA files, read [MP3/WMA
audio file requirement] on right.
1. Press HOME and the Home menu appears.
2. Select [Music] > [DISC] or [MEMORY CARD] and
press ENTER.
The Audio CD or Music menu appears on the TV
screen.
2. Use v / V to select an option, then press ENTER.
• [Play] Start playback the selected track or file.
• [Open] Opens the folder and a list of files in the
folder appears.
• [Ramdom] Start or stop random playback.
• [Delete] Deletes the file(s) or folder(s) from the
Memory Card.
Example) Audio CD Menu
Random
3. Use v/V to select a track or file
then press PLAY (N). Playback starts.
You can use variable playback functions. Refer to
pages 29-31.
1. Press v / V to select a file then press ENTER.
The menu options appear.
2. Press v / V to select [Random] option then press
ENTER.
4. To stop playback at any time, press STOP (x).
The unit automatically begins random playback
and “RANDOM” appears on the menu screen.
Tips:
•
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
Music menu, press DISC MENU/LIST.
3. To return to normal playback, select [Random]
option again then press ENTER.
Tip:
Press DISPLAY to view ID3-Tag information for the MP3
file. If ID3-Tag information is not present, [MP3 ID3 tag
:None] will appear. If you select a folder, the number of
subfolders and number of MP3/WMA files in the folder
are displayed. Press DISPLAY again to remove the
information screen.
By pressing SKIP ./> during Random play-
back, the unit selects another track and resumes
Random playback.
•
•
On the Music menu, you can display the folders on the
disc. Use v V b B to select the “Folder” icon on the
Music menu then press ENTER twice.
MP3/WMA audio file requirement
File extensions
“.mp3”, “.wma”.
On CDs, DVDs or Memory Card with mixed content
(Audio tracks, MP3/WMA files, DivX files or JPEG files),
you can select among the Music menu, Movie menu
and Photo menu by pressing TITLE repeatedly.
Sampling frequency:
within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA)
•
If you are in a file list and want to return to the Folder
list, use the v/V to highlight
and press ENTER to
Bit rate: within:
8 - 320kbps (MP3), 32 - 192kbps (WMA)
return to the previous menu screen.
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo menu options
1. Use v V b B to select a file then press ENTER.
Viewing a JPEG files
This unit can play JPEG files. Before playing JPEG
recordings, read “Photo file requirement” on page 35.
The menu options appear.
1. Press HOME and the Home menu appears.
2. Select [Photo] > [DISC] or [MEMORY CARD] and
press ENTER.
3. Use v V b B to select a file or folder and press
ENTER.
2. Use v / V to select an option then press ENTER
to confirm your selection.
• [Open] Opens the folder and a list of files in the
folder appears.
• [Full Screen] Shows the selected file as full
screen.
2. Use v / V to select option and press ENTER.
• [Slide Show] Displays Slide Show menu.
Example: When you select a file.
• [Delete] Deletes the selected file(s) or folder(s)
from the Memory Card.
3. Use v / V to select [Full Screen] then press
ENTER.
• [Copy] Copies the file(s) or folder to Memory
Card.
The selected image is displayed in full screen.
Tip:
You can create new folder in the Memory Card.
Select [New Album] option then press ENTER.
[NONAME##] folder is created.
Still picture
Use PAUSE/STEP (X) while showing a picture to
pause mode.
Press ENTER to appear or disappear this menu.
4. To stop viewing at any time, press STOP (x).
Skip Images
Notes:
While viewing a picture, press SKIP (> or .)
once to advance to the next file or return to the
previous file.
•
If the
icon displays in the Photo menu, it means you
cannot see those JPEG files.
•
You can view TV channel or video input source by
pressing RETURN (O). If you want to return to the
Photo menu, press DISC MENU/LIST.
Rotate Images
•
•
If you are in a file list and want to return to the Folder
Use v / V while viewing a picture to flip the picture
clockwise or counterclockwise.
list, use the v/V to highlight
return to the previous menu screen.
and press ENTER to
On CDs, DVDs or Memory Card with mixed content
(Audio tracks, MP3/WMA files, DivX files or JPEG files),
you can select among the Music menu, Movie menu
and Photo menu by pressing TITLE repeatedly.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
View Slide Shows
Photo file requirement
1. Select [Slide Show] option on the Photo menu.
2. Press ENTER.
File extensions
“.jpg”
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD R/RW Format:
ISO 9660 (UDF Bridge format)
Maximum Files/Disc:
Less than 1999 (total number of files and folders)
3. Use b / B / v / V to set the options.
Notes on JPEG file
[Object] option:
Progressive and lossless compression JPEG image
files are not supported.
• [Selected] Views slide show only selected
files.
• [All] Views slide show all files.
[Speed] option:
Sets the Slide Show speed to
[Normal], [Slow], or [Fast].
4. Select the [Start] option then press ENTER to
start the Slide Show.
5. Press STOP (x) to stop the Slide Show and
returns to the Photo menu.
Tips:
•
Use the CLEAR button to select all files, or cancel all
marked files.
•
Selecting multiple files
1. Press MARKER.
A check mark appears on the file. Press MARKER
again to cancel the marked file.
2. Repeat step 1 to mark additional file.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
About DVD recording
Notes for recording
•
The recording times shown are not exact
because the recorder uses variable bit-rate video
compression. This means that the exact record-
ing time will depend on the material being record-
ed.
Notes:
•
•
This Recorder cannot record CD-R or CD-RW
discs.
Fingerprints and small scratches on a disc can
affect playback and/or recording performance.
Please take proper care of your discs.
•
When recording a TV broadcast, if the reception
is poor or the picture contains interference, the
recording times may be shorter.
•
The company does not hold any responsibility to
compensate the contents which should have
been recorded, and any losses or damages (e.g.
losses of business profit, or business intermis-
sion) that may arise from malfunction of this
recorder (not recording/editing as intended).
•
•
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
•
•
The recording time available may decrease if you
heavily edit a disc.
Disc types and recording formats, modes,
and settings
If using a DVD-RW disc, make sure you change
the recording format (Video mode or VR mode)
before you record anything on the disc. See page
24 (Initialize) for how to do this.
This recorder can play many different kinds of DVD
discs: pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD+RW, DVD+R(DL) and DVD-RAM discs.
The disc format for DVD-R, DVD+R(DL), DVD+RW
discs is always “Video format”—the same as pre-
recorded DVD-Video discs. This means that once
finalized, you can play a DVD-R, DVD+R (DL), or
DVD+RW in a regular DVD player. The DVD-RAM
disc format is Video Recording (VR) format.
The DVD-RW disc format is Video Recording (VR)
format or Video format. You can change Recording
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc for-
mat. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc for-
mat is Video format, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
These can be changed as required for each record-
ing and determine the picture quality and how much
space the recording will take up on the disc.
•
When using a DVD-R or DVD+R disc, you can
keep recording until the disc is full, or until you
finalize the disc. Before you start a recording
session, check the amount of recording time left
on the disc.
•
•
When using a DVD-RW disc in Video mode,
recording time available will only increase if you
erase the last title recorded on the disc.
The Delete Title option in the Title List (Original)
menu only hides the title, it does not actually
erase the title from the disc and increase the
recording time available (except for the last
recorded title on a DVD-RW disc in Video mode).
•
•
Overwrite recording is available using DVD+RW
discs.
When using a DVD+R/RW, the recorder will exe-
cute the Menu-making operation to update the new
title and editing when removing the disc from the
recorder.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Recording from a TV
Instant Timer Recording
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc or tape is full or you stop the recording.
Instant Timer Recording allows you to make a
recording easily of a preset length without using the
program timer.
1. Follow steps 1-4 as shown left (Basic Recording
from a TV).
2. Press z REC repeatedly to select the recording
time length. Recording starts after the first press.
DVD: Each subsequent press increases the
recording time by 10 minutes.
1. Switch on the Recorder, select the device (VCR
or DVD) for Recording and load a recordable disc
or tape. Also make sure that the TV input is set to
this recorder.
2. Set a recording mode as necessary by pressing
REC MODE repeatedly.
VCR: Each subsequent press increases the
recording time by 30 minutes (maximum
540 minutes). Please confirm the VHS tape
has enough remaining time to be recorded
before recording.
DVD: XP, SP, LP, EP.
VCR: SP, SLP.
3. Select the TV channel to record.
4. Use AUDIO to select the audio channel to record.
The table below shows what will be recorded on
the different settings for different types of broad-
cast. The last column (Monitor Audio) shows what
you’ll hear as it is recording.
Checking the Recording Time
Press z REC or DISPLAY once to check the record-
ing time. The recalled setting will automatically return
to the TV screen for a moment.
Also, remaining time of recording is shown in the dis-
play window.
TV Broadcast Selected
Audio
Broadcast Audio Monitor
L Ch
MONO MONO
L
L
R
R Ch
Audio
MONO
STEREO
Left
MONO
STEREO
MONO
STEREO
Left
R
L
To Extend the Recording Time
Right
R
Right
MONO
MONO+SAP MONO
SAP
MONO MONO
MONO MONO
MONO
MONO
SAP
STEREO
SAP
The recording time can be extended anytime by
pressing z REC.
Each subsequent press increases the recording time
SAP
L
SAP
R
STEREO
+SAP
STEREO
SAP
by 10 minutes (DVD) or 30 minutes (VCR).
SAP
SAP
MONO
MONO MONO
MONO
To Pause the Recording
If you set the audio channel to SAP, but there is
no SAP channel being broadcast, the main audio
(mono or stereo) will be recorded.
1. Press PAUSE/STEP (X) to pause the recording.
2. When you want to continue recording, press
PAUSE/STEP (X) or z REC.
5. Press z REC once to start recording.
The REC indicator lights in the display window.
Notes:
•
•
•
If you press PAUSE/STEP (X) during the Instant Timer
Recording, it will be canceled.
6. Press STOP (x) to stop recording.
The Recorder will automatically power off when the
Instant Timer Recording ends.
Notes:
•
•
The maximum numbers of DVD titles are show below;
- DVD-R/RW, DVD-RAM : 99
- DVD+R(DL)/RW : 49
If the unit is DVD mode when the VCR Instant timer
recording ends, the unit will not automatically power off.
If the Recorder is powered off during DVD recording, the
recording will not be saved.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Timer Recording
•
•
You must insert a recordable disc or tape.
The Timer indicator lights on the front panel
display.
The Timer Recording function allows you to record up
to 16 programs within a period of one month.
•
The Recorder will record the audio according to
the current TV tuner setting (Stereo, Mono or
SAP). Use the AUDIO button to set the audio
before switching the Recorder to Standby mode.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
•
•
The Recorder will automatically power off when
the Timer Recording ends.
If the unit is DVD mode when the VCR timer
recording ends, the unit will not automatically
power off.
•
•
There is a short delay when a timer recording fin-
ishes to confirm the recorded program. If two
timer recordings are set to record sequentially
(one right after the other), the very beginning of
the later program may not be recorded.
3. Select [NEW] and press ENTER.
The Timer Record menu will appear.
You must press STOP (x) to stop the Timer
Recording.
Checking Timer Recording Details
Programming can be checked whenever the
Recorder is turned on.
1. Press HOME and the Home menu appears.
2. Select [TV] > [Timer Record] and press ENTER.
3. Use v / V to select a program.
•
•
[Media] – Choose a media (DVD or VCR).
[Ch.] – Choose a channel (2-69 or 1-125 for
antenna or cable channels respectively,
excluding skip channels), or one of the exter-
nal inputs from which to record (AV1 or AV2).
4. Press ENTER to edit the selected program.
Timer Record menu appears.
•
[Date] – Choose a date up to 1 month in
advance, or select a daily or weekly program.
Canceling a Timer Recording
You can clear a timer setting anytime before the
recording actually starts.
•
•
•
[Start Time] – Set the recording start time.
[End Time] – Set the recording end time.
[Mode] – Choose a record mode.
DVD: EP, LP, SP, XP, or AT (Auto)
VCR: SP, SLP, or AT (Auto)
•
Use v / V to select a program you want to erase
on the Timer Recorder List, then press CLEAR
and select [OK] than press ENTER.
AT(Auto) mode determines how much time is avail-
able on the disc or tape and switches record mode,
if necessary, to complete recording the program.
2. Enter the necessary information for your timer
recording(s).
•
•
b / B (left/right) – Move the cursor left/right
v / V (up/down) – Change the setting at the
current cursor position
•
Press RETURN (O) to exit the Timer Record
menu.
3. Press ENTER to save the program.
4. Press RETURN (O) to exit the Timer Record
List.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
•
•
•
There is no disc (or tape) loaded.
A non-recordable disc (or tape) is loaded.
Disc Protect is set to [ON] in the Disc menu
(see page 25).
•
There are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+RW, DVD+R(DL))
recorded on the disc.
You cannot enter a timer program when:
•
•
A recording is already underway.
The time you’re trying to set has already
passed.
•
There are already 16 timer programs set.
If two or more timer programs overlap:
•
•
The earlier program takes priority.
When the earlier program finishes, the later
program starts.
•
If two programs are set to start at exactly the
same time, the program entered first takes
priority.
If the disc is damaged, the recording may not
complete successfully. In this case even though the
Check field shows [Rec. OK], it may not be.
To record one TV program while
watching another
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
2. Using the TV, select the channel to be viewed.
Tip (VCR mode only)
Always use PAUSE/STEP (X) for best results when making
changes during recording .
For example: To change channels during recording, first
press PAUSE/STEP (X) to put the unit in pause mode.
Then select the desired channel on the Recorder, and press
PAUSE/STEP (X) again to resume recording.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing from DVD to VCR
Dubbing from VCR to DVD
You can copy the contents of a DVD to a VHS tape
using the DUBBING button.
You can copy the contents of a VHS tape to a DVD
using the DUBBING button. This allows you to
archive your old VHS tapes to DVD.
1. Insert a blank VHS videotape into the VCR deck.
1. Insert a blank DVD disc in the DVD deck and
close the disc tray.
2. Insert the disc you wish to copy in the DVD deck
and close the disc tray.
2. Insert the VHS video tape you wish to copy into
the VCR deck.
3. Find the place on the DVD (or Disc) from which
you want to start dubbing using the PLAY, FF,
REW and PAUSE functions.
3. Find the place on the VHS tape from which you
want to start dubbing using the PLAY, FF, REW
and PAUSE functions. For best results, pause
playback at the point from which you want to
record.
For best results, pause playback at the point from
which you want to record.
4. Press the DUBBING button.
The Dubbing menu appears.
4. Press the DUBBING button.
The Dubbing menu appears.
5. Use v / V / b / B to select the desired Record
Mode: SP or SLP (3 times SP).
5. Use v / V / b / B to select the desired Record
6. Select [Dubbing] then press ENTER or DUBBING
to start copying.
Mode: EP, LP, SP or XP.
6. Select [Dubbing] then press ENTER or DUBBING
to start copying.
7. To stop dubbing at any other time,
press STOP (x).
You must stop the dubbing process manually
when the DVD movie ends, or the unit may replay
and record over and over again.
7. To stop dubbing at any other time,
press STOP (x).
Dubbing will stop automatically when the VHS
tape ends.
Note:
Note:
If the DVD (or Discs) you are attempting to copy is
copy protected, you will not be able to copy the disc.
It is not permitted to copy Macrovision encoded
DVDs (or Discs). [Copy-protected. Cannot record.] is
displayed on the TV screen.
If the VHS video tape you are attempting to copy is
copy protected, you will not be able to copy the tape.
It is not permitted to copy Macrovision encoded
tapes.
Tip:
Tip:
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the VCR playback posi-
tion using PLAY, REW, FF, PAUSE/STEP, etc. The
DVD deck will remain in Pause mode. To resume
Dubbing, press the DUBBING button twice.
If you press PAUSE during Dubbing mode, both the
DVD and VCR decks go into Pause mode and the
DUBBING button blinks on the front panel. While in
Pause mode, you can adjust the DVD playback posi-
tion using PLAY, REW, FF, PAUSE/STEP, etc. The
VCR deck will remain in Pause mode. To resume
Dubbing, press the DUBBING button twice.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
RAM
Recording from External
Components
Playing while you are recording
You can start play from the beginning of the title while
continuing to record it.
You can record from an external component, such as
a camcorder or VCR, connected to any of the
Recorder’s external inputs.
While recording (in DVD mode)
1. Press PLAY (N).
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 18.
Start play of the title you are recording.
2. Press STOP (x) to return to the current recording
screen.
2. Press INPUT repeatedly to select the external
input to record from.
•
•
•
AV1: Audio/Video Input mounted on back
panel.
AV2: Audio/Video Input mounted on front
panel.
DV: DV Input mounted on front panel.
3. Load a recordable disc or tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP or EP.
VCR: SP or SLP
or
5. Press z REC once to start recording.
1. Press TIMESHIFT.
The REC indicator lights in the display window.
The PIP(Picture-In-Picture) window appears on
the screen as shown below. What is currently
being recorded appears as a PIP and you will
hear the playback audio.
6. Press STOP (x) to stop recording.
Notes:
•
Check that the Audio In settings DV Record Audio
are as you want them. See page 24.
•
If your source is copy-protected using
CopyGuard, you will not be able to record it using
this recorder. See Copyright on page 9 for more
details.
•
•
Recording continues until you press STOP (x) or
the disc is full.
To record for a fixed length of time, see [Instant
Timer Recording] on page 37.
Additional Information
2. Press STOP (x) to return to the current recording
screen.
Simultaneous Play and Record
You can play a DVD during the VCR playback or
recording, press DVD to change DVD mode and
perform the DVD playback.
Notes:
•
Play cannot be started until at least 30 seconds after
recording starts.
•
•
This function does not work in VCR Recording mode.
This function can operate the DVD-RAM disc only.
Notes:
•
•
•
You cannot play or record both DVD and VCR at
the same time.
You can not change VCR mode during the DVD
recording mode.
If you wish VCR playback or record during the
DVD playback, press VCR to change VCR mode
and perform the VCR playback or recording.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Make sure your digital camcorder is connected to
the front panel DV IN jack. See page 18.
Recording from DV Input
2. Check that the DV audio input is as you require.
You can choose between Audio 1 (original audio)
and Audio 2 (overdubbed audio).
Before DV dubbing
You can connect a DV-equipped camcorder to this
recorder using a single DV cable for input and output
of audio, video, data and control signals.
ꢀ This recorder is only compatible with DV-format
(DVC-SD, DV25) camcorders. Digital satellite
tuners and Digital VHS video recorders are not
compatible.
ꢀ You cannot connect more than one DV camcorder
at a time to this recorder.
ꢀ You cannot control this recorder from external
equipment connected via the DV IN jack (including
two recorders).
ꢀ DV Input is set from the DV Record Audio in
sub-menu of the Setup menu. See [DV Record
Audio] on page 24 for more information.
3. Press INPUT repeatedly to select the DV input.
4. Find the place on the camcorder tape that you
want to the recording to start from.
For best results, pause playback at the point from
which you want to record.
ꢀ Depending on your camcorder, you can use
this recorder’s remote to control the camcorder
using the STOP, PLAY, BACKWARD, FOR-
WARD and PAUSE functions.
ꢀ It may not always be possible to control the con-
nected camcorder via the DV IN jack.
ꢀ Digital camcorders can usually record audio as
stereo 16-bit/48kHz, or twin stereo tracks of 12-
bit/32kHz. This recorder can only record one stereo
audio track. Set [DV Record Audio] option to Audio
1 or Audio 2 as required (see page 24).
ꢀ Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
ꢀ Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
the source component, or the DV cable becomes
disconnected.
5. Press z REC once to start recording.
ꢀ Recording is automatically stopped if the
recorder detects no signal.
ꢀ You can pause or stop the recording by press-
ing PAUSE/STEP (X) or STOP (x).
You cannot control the camcorder from this
Remote Control during recording.
ꢀ In Video mode, the final frame of the recording
may remain displayed on screen for a while
after recording stops.
Troubleshooting
Recording from a Digital Camcorder
If you cannot get a picture and/or audio through the
DV IN jack, check the bullet points:
ꢀ Make sure the DV cable is properly connected.
ꢀ Try switching off the connected equipment then
switch back on.
You can record from a digital camcorder connected to
the DV IN jack on the front panel of this recorder.
Using the recorder’s remote, you can control both the
camcorder and this recorder.
Before recording, make sure that the audio input for
the DV IN jack is set up (see page 24).
ꢀ Try switching the audio input.
Note:
Tips:
Depending on the connected camcorder, you may not
be able to control it using the Remote Control supplied
with this recorder.
•
•
The source signal must be DVC-SD format.
Some camcorders cannot be controlled using this
recorder’s remote.
•
If you connect a second recorder using a DV
cable, you cannot control the second DVD from
this one.
•
•
You cannot control this unit remotely from a com-
ponent connected to the DV IN jack.
You cannot record date and time information from
a DV cassette.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Title List and Chapter List
Menu Overview
1 2
3
4
5
6 7
Using the Title List menu you can edit video content.
The editing features available in the Title List menu
depend on whether you are editing video on DVD,
and whether you’re editing Original content, or a
Playlist.
There are two ways to edit VR mode DVD-RW discs.
You can directly edit the Original content of the disc,
or you can create and edit a Playlist. The Playlist
doesn’t actually change any of the content on the
disc, but just controls how the content is played back.
1. Press DISC MENU/LIST to display the TITLE
LIST menu.
1. Menu options: To display menu option, select a
Playback should be stopped when you do this.
title or chapter then press ENTER. The options
displayed differ depending on the disc type.
• [Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
ꢀ When selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
ꢀ If you are editing a VR mode disc, press DISC
MENU/LIST to switch between Original and
Playlist menu.
• [Search]
- [Chapter] Displays Chapter List of the Title.
- [Time] Search time for you want start point
of the title .
ꢀ On the left side of the screen are the menu
options. The main part of the screen shows
thumbnails of the titles (or chapter) on the DVD.
You can change these thumbnails using the
THUMBNAIL button. (see [Changing Title
Thumbnails] on page 44.)
• [Delete] Deletes the title or chapter. (page 46)
• [Move] Moves chapter position on [Chapter List -
Playlist] menu (page 48).
• [Protect] Protects accidental recording, editing or
deleting of the title.(page 48)
• [Edit] Edits or Deletes a part of the title.
- [Title Name] Edits the title name. (page 47).
- [Delete Part] Deletes a part of the Title (page 46).
- [Divide] Divides a title into two (page 49).
- [Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 48)
• [Playlist Add] Adds the title or chapter to the Playlist.
(page 45)
• [Dubbing] Dubs the title to VCR.
• [Title] Displays Title List of the chapter.
• [Combine] Combines two chapters into one (page
49).
ꢀ Press DISPLAY to display the information of
selected title on the Title List menu.
ꢀ After selecting a title or chapter on the Title List
or Chapter List menu, then press ENTER. The
menu options on the left side of the menu. Use
v / V to select a option then press ENTER to
confirm your selection.
2. To exit the TITLE LIST menu, press
• [Full Play] Starts playback of the selected title includ-
ing the hidden chapters.
RETURN (O) repeatedly.
2. Current media.
3. Indicates the record mode, free space, and
elapsed time progress bar.
4. Currently selected title.
5. Thumbnail.
6. Shows the selected title number and total number
of titles.
7. Shows the title name, recorded date, and record-
ing length.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Chapter Markers
VR Mode: Original and
Playlist Editing
VR
-RW
+RW
+R
RAM
You can create chapters within a title by inserting
chapter marks at the desired points.
Titles, Chapters and Parts
Titles in the disc’s original content contain one or
more chapters. When you insert a disc’s title into the
Playlist, all the chapters within that title also appear.
In other words, chapters in the Playlist behave exact-
ly as chapters on a DVD-Video disc do. Parts are
sections of Original or Playlist titles. From the Original
and Playlist menu you can add or delete parts.
Adding a chapter or title to the Playlist creates a new
title made up of a section (ie., chapter) of an Original
title. Deleting a part removes part of a title from the
Original or Playlist menu.
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see [Auto Chapter] on page 24).
During recording or playing back, at the point you
want to start a new chapter, press CHP. ADD.
A chapter marker icon appears on the TV screen.
Changing Title Thumbnails
Notes:
VR
-RW
+RW
+R
RAM
•
When editing using the Delete, Add and Move
functions, the start and end frames may not be
exactly as set in the start and end point display.
Each title displayed in the Title List menu is repre-
sented by a thumbnail picture taken from the start of
that title or chapter.
If you prefer, select a different still picture from within
a title.
Press THUMBNAIL to make the currently displayed
picture the one that appears in the Title List menu.
The still picture that you choose appears in both the
Original or Playlist menu.
•
During Playlist playback, you may notice a
momentary pause between edits. This is not a
malfunction.
Is editing a DVD like editing a video tape?
No. When you edit a video tape you need one video
deck to play the original tape and another to record
the edits. With DVD, you edit by making a ‘Playlist’ of
what to play and when to play it. On playback, the
Recorder plays the disc according to the Playlist.
Tip:
You can also change the thumbnail picture of the title
on the Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
About word ‘Original’ and ‘Playlist’
VR
-RW
RAM
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
the edited version.
ꢀ Original: content refers to what’s actually recorded
on the disc.
ꢀ Playlist: content refers to the edited version of the
disc — how the Original content is to be played.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Making a New Playlist
Adding Additional Title /
VR
-RW
RAM
Chapters to the Playlist
VR
-RW
RAM
Use this function to add an Original title or chapter to
the Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don’t need
later - see [Deleting an Original or Playlist
Title/Chapter] on page 46).
You can add an Original title or chapter to add to a
Playlist title even if it is already registered.
1. Choose a title or chapter on the [TITLE LIST-
Original] menu or [Chapter List-Original] menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
screen.
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist title.
2. Use v / V to select [Playlist Add] from menu
options then press B.
1. Choose a title or chapter on the [TITLE LIST-
Original] menu or [Chapter List-Original] menu to
put into the Playlist, then press ENTER.
The menu options appears on the left side of the
menu.
2. Use v / V to select [Playlist Add] option then
press B.
3. Choose a Title List-Playlist that is already regis-
tered to insert a title or chapter, then press
ENTER.
4. Repeat steps 1-3 to add additional title or chapter
on the Playlist.
You can view the added chapters on the [Chapter
List-Playlist] menu.
3. Select [New Playlist] then press ENTER.
The new title appears in the updated Playlist. All
chapters of the title are added to the Playlist.
5. Press RETURN (O) to exit, or DISC MENU/LIST
to go back to the [Title List-Original] menu.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VR
-RW
RAM
Deleting an Original or
Playlist Title/Chapter
Deleting a Part
You can delete a part which you do not want in the
title.
When you erase a title or chapter from the Playlist
menu, you only remove it from the Playlist; the
title/chapter remains in the Original menu.
1. Use b / B / v / V to choose a title you want to
delete on the Title List menu then press ENTER.
The options appears on the left side of the menu.
If you choose to delete a title or chapter from the
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2. Select [Edit] > [Delete Part] option then press
ENTER.
[Edit] menu appears on the TV screen.
Example: Edit (Delete Part) (DVD-VR)
Note:
It may not be possible to delete chapters that are less
than 3 seconds long.
1. Use b / B / v / V to choose a chapter or title you
want to delete on the [TITLE LIST] or [Chapter
List] menu then press ENTER.
The menu options appears on the left side of the
screen.
2. Select [Delete] option from the options on the
menu.
3. Starts playback and use pause step, search and
slow-motion to find the starting point.
Example: Title List (DVD-VR)
4. Press ENTER at the starting point of the section
you want to delete.
[End Point] icon is highlighted.
The part is indicated on the Progress Bar.
5. Use pause step, search and slow-motion to find
the ending point.
6. Press ENTER at the ending point of the section
you want to delete.
You can cancel the selected point, use v / V to
select [Cancel] icon then press ENTER.
3. Press ENTER to confirm.
7. If you finish to edit, select [Done] icon then press
ENTER.
The confirm message for deleting will appear.
4. Use b / B to select [OK] then press ENTER.
The selected chapter or title is deleted.
After pressing ENTER, the new, updated menu is
displayed.
The confirm message for deleting will appear.
Use b / B to select [OK] then press ENTER.
The selected part is deleted from the title and Title
List menu appears.
5. Repeat steps 1 - 4 to continue to delete from the
menu.
Notes:
6. Press RETURN (O) repeatedly to exit the menu.
•
It may not be possible to delete parts that are less than
3 seconds long.
Notes:
•
If you select [Cancel] then press ENTER, the Recorder
will go to previous option and into Pause mode.
•
•
•
When DVD+RW recording, the deleted title’s
name is changed to [Deleted Title].
If more than two titles are repeatedly deleted, the
titles are combined into one.
When you are deleting a title or chapter, only the
last one on DVD+R/RW increases remaining
recording time.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
Naming a Title
You can name Original and Playlist titles independ-
ently.
•
•
Names can be up to 32 characters long.
For discs formatted on a different recorder, you
will see only a limited character set.
1. Choose the title you want to name on the Title List
menu, then press ENTER.
•
When recording on DVD-R, DVD+R or DVD+RW
discs, the entered name is displayed on the DVD
player only after finalization.
The menu options appears on the left side of the
menu.
2. Use v/V to select [Edit] > [Title Name] option then
press ENTER.
Time Search
Keyboard menu appears.
You can select start point of the title.
1. Use b / B / v / V to choose a title on the TITLE
LIST menu then press ENTER.
The options appears on the left side of the menu.
2. Select [Search] > [Time] option then press
ENTER.
[Time] menu appears on the TV screen.
3. Enter a name for the title. Use b / B / v / V to
select a character then press ENTER to confirm
your selection.
•
•
•
Language : Selects a keyboard type.
Space: Inserts a space at the cursor position.
Delete: Deletes the character to the left of the
cursor position.
•
•
•
b / B: Moves the cursor left or right.
End time
Current picture
Selected point
Seleted time
OK: Confirms the name you have entered.
Cancel: Deletes all characters and exits the
Keyboard menu.
Remote control buttons for entering a name
•
•
•
•
•
•
PLAY (N): Inserts a space at the cursor posi-
tion.
Start time
PAUSE/STEP (X): Deletes the character to
the right of the cursor position.
3. Use b / B to find the point you want to start.
The point increase 1 minute step.
If you press and hold b / B then the point
increase 5 minute step.
SKIP (. / >): Moves the cursor left or
right.
4. Press ENTER to start seleted point.
STOP (x), CLEAR: Deletes the character to
the left of the cursor position.
0-9: Enters the character corresponding to the
selected column.
DISC MENU/LIST, DISPLAY: Switches the
keyboard type.
4. Choose [OK] then press ENTER to fix the name
and return to the previous menu screen.
5. Press RETURN (O) repeatedly to exit the menu.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
VR
-RW
Tip:
Moving a Playlist Chapter
If you select a hidden chapter or title on the TITLE
LIST or Chapter List menu, you can ‘show’ it by
choosing [Show] option on the menu. After doing that,
you are able to see the chapter or title.
Use this function to re-arrange the playing order of
Playlist chapters on the Chapter List-Playlist menu.
Note:
This function is not available if there is only one
chapter.
Protect a Title
1. Select a chapter on the Chapter List-Playlist
menu.
VR
-RW
+RW
+R
RAM
2. Press ENTER.
Use this function to protect against accidental record-
ing, editing or deleting of the title.
The menu options appears on the left side of the
menu.
1. Press DISC MENU/LIST to display the [TITLE
LIST] menu.
3. Use v / V to select [Move] option from Playlist
options then press ENTER.
2. Use v V b B to choose a title you want to protect
then press ENTER.
Options appear on the left side of the screen.
3. Select [Protect] from the options.
Example: Title List (DVD+RW)
4. Use b / B / v / V to choose the place you want to
move the chapter then press ENTER.
After pressing ENTER, the updated menu is
displayed.
4. Press ENTER to confirm.
The lock mark will appears on the title’s
thumbnail.
Hide a Chapter/Title
+RW
+R
Tip:
You can skip playing chapters or titles without delet-
ing from the disc.
If you select a title that has already been protected
on the Title List menu, you can ‘unprotect’ it by
choosing [Unprotect] option from the Title List menu
options. After doing that, you can edit and delete the
title.
1. Use v V b B to choose a chapter or title you
want to hide on the [TITLE LIST] or [Chapter List]
menu, then press ENTER.
Options appear on the left side of the screen.
2. Select [Edit] > [Hide] option.
Example: Title List (DVD+RW)
3. Press ENTER to confirm.
The chapter’s or title’s thumbnail will dim.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Divide One Title Into Two
+RW
Combining Two Chapters
Into One
VR
-RW
+RW
+R
RAM
Use this function to combine two adjacent chapters
into one.
Use this command to split a title up into two new
titles.
1. On the Chapter List menu, select the second
chapter of the two chapters you want to combine
then press ENTER
1. On the Title List menu, select a title you want to
divide then press ENTER.
The menu options appears on the left side of the
screen.
The menu options appears on the left side of the
screen.
2. Select [Edit] > [Divide] option.
Example: Title List (DVD+RW)
2. Use v / V to select [Combine] option.
The combine indicator appears between the two
chapters you want to combine.
Example: Title List (DVD+RW)
3. Press ENTER.
[Edit (Divide)] menu appears.
Current picture
3. Repeat steps 1 - 2 to continue to combine from
the menu.
4. Press RETURN ( O) repeatedly to exit the
The first title’s
thumbnail
menu.
Notes:
The second
This function cannot operate listed as below;
title’s thumbnail
•
•
•
If there is only one chapter within the title.
If you select first chapter.
If two chapters created by erasing a part from an
original title.
4. Use play, pause step, search and slow-motion to
find the point you want to divide the title.
•
•
If two chapters created from different titles.
If two chapters created by moving an order from an
original title.
5. Select [Divide] option then press ENTER at the
point.
To reset the point, select [Cancel] option then
press ENTER. Repeat from step 3.
6. Choose [Done] option then press ENTER to fix
the dividing point.
The title is divided into two new titles. It take up to
4 minutes to divide.
Note:
You cannot select dividing point less than 3 seconds.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press TITLE in Play mode or DVD tuner mode.
Title List menu will appear as shown below.
Overwriting Recording +RW
To overwrite a new video recording on a previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
1. Select input source you want to record
(TV channel, AV1-2, DV).
2. Press DISC MENU/LIST to display the TITLE
LIST menu.
3. To play back a title, select the title you want then
press ENTER or PLAY (N).
Tip:
You can remove the Title List menu by pressing
STOP (x).
Playing Your Recordings on
Other DVD Players
(Finalizing a Disc)
Most regular DVD players can play finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
check what formats of discs it will play.
3. Use v V b B to choose a title you want to
overwrite.
4. Press z REC to start overwrite recording.
Overwrite recording starts from the start point of
the title.
5. Press STOP (x) to stop the overwrite recording.
The new title is created and updated menu is dis-
played.
Notes:
•
•
This function is not available for a protected title.
If the overwrite is longer than the recording
length of the current title, the next title is over-
written. But if next title is protected, the over-
writing stops at the starting point of the title.
Finalizing ‘fixes’ the recordings and editings in place
so that the disc can be played on a regular DVD play-
er or computer equipped with a suitable DVD-ROM
drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. The menu can be accessed
by pressing DISC MENU/LIST or TITLE.
•
If the selected title’s recording length is less than
10 seconds, the next title is overwritten. But if the
next title is protected, overwriting stops.
To finalize a disc, refer to [Finalize] on page 25.
Notes:
•
Unfinalized DVD+RW is playable on regular DVD
players.
Viewing Title List menu
displayed on other DVD
Recorders or Players
•
The edited contents of a DVD+RW (DL) disc is
compatible on regular DVD players only after
finalization.
•
•
•
Any edited contents of the DVD+R disc are not
compatible on regular DVD players.
(Hide, chapter combine, added chapter mark, etc.)
+RW
+R
You can view the Title List menu displayed on the
other DVD player that is capable of playing DVD+RW
or DVD+R discs.
How long finalization takes depends on the type
of disc, how much is recorded on the disc, and
the number of titles on the disc.
1. Insert DVD+R or DVD+RW disc recorded already.
DVD+R DL disc can take up to 30 minutes to
finalize.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
Controlling Your TV with the
Supplied Universal Remote
Control
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08,56
You can control the sound level, input source, and
power switch of your LG TV with the supplied
Universal Remote Control.
16,33,37,44,45
70
AKAI
01
NEC
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL
PANASONIC
PHILCO
43
You can control your TV using the buttons below.
BELL & HOWELL
BROKSONIC
CANDLE
33
07,11,13,25,35,36
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
18,19
51
CCE
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
43
09
49,50,51,52,53,54,55
03,37,44
CORONADO
CROWN
09
11,13
09
16,17,23
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
01,03,37,44,69
16,17,23
REALISTIC
SAMPO
08
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC
GRADIENTE
HITACHI
03,10,11,13,37,44
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEARS
09,25,26,27,28,29
64
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62,93
JC PENNEY
JVC
SIGNATURE 2000
KIOTE
SONY
KMC
09
SOUNDESIGN
SYLVANIA
51
KTV
01,08,09,31
01,07,08,09,35,39,40
33
01,04,05,06,07,
08,35,51
LG (GOLDSTAR)
LODGENET
LOGIK
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
46,47
By pressing
POWER
You can
33
11
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
Turn the TV on or off.
MAGNAVOX
69
INPUT
Switch the TV’s input source
between the TV and other input
sources.
08
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
MARANTZ
01,32
MEMOREX
33
XR1000
CH +/–
Scans up or down through
memorized channels.
MGA/MITSUBISHI
01,08,32,34
ZENITH
01, 02,33,59
VOL +/–
Adjust the volume of the TV.
Notes:
•
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code.
Note:
Depending on the unit being connected, you may not be
able to control your TV using some of the buttons.
•
•
If you enter a new code number, the code number previ-
ously entered will be erased.
When you replace the batteries of the remote, the code
number you have set may be reset to the default set-
ting. Set the appropriate code number again.
Controlling other TVs with the
Universal Remote Control
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is list-
ed in the table below, set the appropriate manufactur-
er code.
1. While holding down TV POWER button, press the
number buttons to select the manufacturer code
for your TV (Refer to table on the right column).
2. Release TV POWER button.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Tamil
Tatar
Hebrew
Hindi
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Sindhi
Area Code List
Choose a area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
KE
KW
LY
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
LU
Zimbabwe
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall out-
let securely.
ꢀ The TV is not set to receive Recorder
signal output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the Recorder appears on the TV
screen.
Abnormal or no picture.
ꢀ The video cable is not connected
ꢀ Connect the video cable into the jacks
securely.
securely.
ꢀ Unit output setting and TV resolution
ꢀ Check TV capability.
capabilites mismatch.
ꢀ Check mode of connections
(eg. S-Video, Components etc.).
ꢀ Check unit Resolution setting
according to TV capability and mode
of connection.
ꢀ Wrong connection.
ꢀ Check the connection.
ꢀ The equipment connected with the
audio cable is not set to receive
Recorder signal output.
ꢀ Select the correct input mode of the
audio receiver so you can listen to the
sound from the Recorder.
No sound.
ꢀ The audio cables are not connected
ꢀ Connect the audio cable into the jacks
securely.
securely.
ꢀ The power of the equipment connected ꢀ Turn on the equipment connected with
with the audio cable is turned off. the audio cable.
ꢀ The AUDIO options are set to the wrong ꢀ Set the AUDIO options to the correct
position.
position.
ꢀ In HDMI mode, audio selection is not
ꢀ Change AUDIO setup to PCM mode.
set to PCM.
ꢀ Clean the disc.
ꢀ The disc is dirty.
The playback picture is
poor.
ꢀ Check tuning, carry out tuning again.
ꢀ Clean video heads.
ꢀ The TV channels are not tuned in properly.
ꢀ Tape heads are dirty.
Use CH/TRK (v/V) for manual tracking
adjustment while tape is playing.
ꢀ
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ The video signal from the external
component is copy-protected.
Picture from external
input is distorted.
ꢀ You cannot connect via the Recorder.
Connect the component directly to
your TV.
ꢀ The skipped channels were deleted with
the CH. Add/Del feature.
Some channels are
skipped over when
using CH(v / V).
ꢀ Use the CH. Add/Del feature to
restore channels. See [To Add or
Erase Channels] on page 21.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
ꢀ No disc is inserted.
Correction
Symptom
ꢀ Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
The Recorder does not
start playback.
ꢀ No tape is inserted.
ꢀ An unplayable disc is inserted.
ꢀ The disc is placed upside down.
ꢀ Insert a playable disc. (Check the disc
type and Regional code.)
ꢀ Place the disc with the playback side
down.
ꢀ Place the disc on the disc tray correctly
ꢀ The disc is not placed within the
inside the guide.
guide.
ꢀ Clean the disc.
ꢀ The disc is dirty.
ꢀ Cancel the Rating function or change
ꢀ The Rating level is set.
the rating level.
Video tape cannot be
inserted.
ꢀ Eject the tape in.
ꢀ Is the cassette compartment empty?
The Remote Control
ꢀ There is an obstacle in the path of the ꢀ Remove the obstacle.
does not work properly.
Remote Control and this unit.
ꢀ The batteries in the Remote Control
ꢀ Replace the batteries with new ones.
are exhausted.
ꢀ The Remote Control is not pointed at
ꢀ Point the Remote Control at the remote
the remote sensor of the Recorder.
sensor of the Recorder.
ꢀ The Remote Control is too far from
ꢀ Operate the Remote Control within
the Recorder.
23ft (7m).
ꢀ This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
ꢀ When using a VCR, first press the VCR
button. When using a DVD, first press
the DVD button.
Camcorder image is
not shown.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image via
A/V input or DV IN to
Recorder is not shown
on TV screen.
ꢀ The recorder’s source is incorrect.
ꢀ Use INPUT to select input channel
(AV1, AV2 or DV IN).
ꢀ Clock in record is not set to
correct time.
Timer recording is not
possible.
ꢀ Set clock to correct time.
ꢀ Timer has been programmed
ꢀ Reprogram Timer.
incorrectly.
ꢀ Reprogram Timer and turn off the
Recorder enable timer.
ꢀ
(TIMER Record) indicator light does
not appear after programming timer.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Correction
Symptom
ꢀ Antenna or cables are loose.
ꢀ Tighten connections or replace cable.
Picture or sound of
broadcasting channel is
weak or missing.
ꢀ Wrong Tuning Band is selected in the ꢀ Try [Tuning Band Select] options; see
Recorder Setup menu. page 21 for details.
ꢀ The disc was recorded in Video mode. ꢀ Finalize the disc; see page 25.
Can’t play disc recorded
on this Recorder on
another DVD player.
ꢀ Some players will not play even a
ꢀ No solution.
finalized disc recorded in Video mode.
ꢀ The disc was recorded in VR mode.
ꢀ The other player must be RW
compatible in order to play it.
ꢀ Discs recorded with copy-once materi- ꢀ No solution.
al cannot be played on other players.
ꢀ The remaining blank space on the
ꢀ Use another disc.
Cannot record or did
disc is insufficient.
not record successfully.
ꢀ The source you are trying to record is ꢀ You cannot record the source.
copy-protected.
ꢀ When setting the recording channel,
the channel is tuned on the TV’s own
tuner.
ꢀ Select the channel on the Recorder’s
built-in TV tuner.
ꢀ When recording to a Video mode disc, ꢀ Use a VR mode formatted disc for
programs that are copy-once protect-
ed cannot be recorded.
copy-once material.
ꢀ TV is not Stereo-compatible.
ꢀ No solution.
Stereo Audio Record
and/or Playback not
present.
ꢀ Broadcast program is not in stereo for- ꢀ No solution.
mat.
ꢀ Recorder A/V Out jacks are not
ꢀ Make A/V connections. Stereo is avail-
connected to TV A/V In jacks.
able only via A/V output from Recorder.
ꢀ Recorder Audio/Video Out is not
ꢀ Select AUX or A/V source as TV input.
selected for viewing at the TV.
ꢀ Recorder’s TV audio channel is set to ꢀ Set TV audio channel mode to Stereo.
SAP or MONO.
See [Changing TV Audio Channel] on
page 26.
You can reset the Recorder as follows :
Reset the Recorder
•
Press and hold the POWER button on the
front panel for more than five seconds. This
will force the Recorder to power off.
If you observe any of the following symptoms...
•
When the Recorder is plugged in, but the
power will not turn on or off.
Press the POWER button on the front panel
again to turn the Recorder back on.
•
•
When the display window does not working.
•
Unplug the power cord and then plug the
power cord again after more than five sec-
onds.
When the Recorder does not operate
normally.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
AC 120 V, 60 Hz
Power consumption
Dimensions (approx.)
Mass (approx.)
27 W
430 X 78.5 X 310 mm (16.9 x 3.1 x 12.2 inches) (w x h x d)
5.2 kg (11.44 lbs)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
Operating temperature
Operating humidity
Signal system
NTSC
Recording
Recording format
Recordable discs
DVD VideoRecording, DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable (Double Layer), DVD-Random Access Memory
DVD ; Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
Recordable time
DVD+R DL (8.5GB): Approx. 1 hour 50 minutes (XP mode),
3 hours 40 minutes (SP mode),
7 hours 10 minutes (LP mode), 11 hours (EP mode)
VCR ; SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
Video recording format
Sampling frequency
27MHz
Compression format
MPEG 2
Audio recording format
Sampling frequency
48kHz
Compression format
Dolby Digital
VCR Specifications
Head system
Four head helical scan azimuth system
Timer
12-hour display type with AM, PM
Tape speed
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
Tape width
12.7 mm
Rewind time
About 65 seconds (T-120)
Antenna
75 ohms (VHF/UHF)
VHF output signal
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
Channel separation
Channel 3 or 4 (Switchable)
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20Hz to 20kHz
43dB
88 dB
60 dB
56
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Specifications
Laser system
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
More than 95dB
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Less than 0.008%
More than 90 dB
Inputs
ANTENNA IN
VIDEO IN (AV1,2)
AUDIO IN (AV1,2)
S-VIDEO IN
Antenna or CATV input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
-6 dBm more than 47 kohms, RCA jack (L, R) x 2
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
DV IN
4 pin (IEEE 1394 standard)
Outputs
VIDEO OUT
1.0 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
HDMI video/audio output
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
RF OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
19 pin (HDMI standard, Type A)
0.5 V (p-p), 75 Ω, RCA jack x 1
Optical connector x 1
2.0 Vrms (1 kHz, -6 dB), 600 Ω, RCA jack (L, R) x 2
Channel 3 or 4 (Switchable)
Accessory:
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . .
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Audio cable (L, R) . . . . . . . . . . . . . . . .1
Remote Control . . . . . . . . . . . . . . . . . .1
1
Design and specifications are subject to change without notice.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original pur-
chaser of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the
Warranty Period. After the Warranty Period, you pay
inbound shipping charges and LG pays return shipping
charges.
Visit our website at: http://www.lgservice.com
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG ELEC-
TRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE DAMAGES
OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT LIMITATION, LOST
REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE WHETHER BASED
IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or consequential dam-
ages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty
gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls, calibration,
maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current or
voltage, reception problem caused by inadequate home antenna or faulty antenna connections, computer
software, institutional or commercial use, or other causes not arising out of defect in material or workmanship.
Therefore, the cost of repair or replacement of such defective product shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For nearest Authorized Service Center, Where to buy,
Product Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/N : 3834RV0052F
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
|