DF8912NH_HA1ULL
DVD PLAYER
OWNER’S MANUAL
MODEL : LGDVB418
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Picture and Frame-by-Frame Playback . . .20
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . .20
Random . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .20
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
3D Surround . . . . . . . . . . . . . . . . . . . . . .20
Time Search . . . . . . . . . . . . . . . . . . . . . . . .20
Contents
Introduction . . . . . . . . . . . . . . . . . . .4
Symbol used in this Manual . . . . . . . . . . . . . .4
About the
Symbol Display . . . . . . . . . . . .4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Handling Discs . . . . . . . . . . . . . . . . . . . . . .4
Storing Discs . . . . . . . . . . . . . . . . . . . . . . . .4
Cleaning Discs . . . . . . . . . . . . . . . . . . . . . .4
Types of Playable Discs . . . . . . . . . . . . . . . . .5
Regional code . . . . . . . . . . . . . . . . . . . . . . . .5
Disc-related terms . . . . . . . . . . . . . . . . . . . . .6
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Display Window . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . . . .9
Remote Control Operation . . . . . . . . . . . . . .9
Remote Control Battery Installation . . . . . . .9
Zoom
Marker Search
. . . . . . . . . . . . . . . . . . . . . . . . . . .21
. . . . . . . . . . . . . . . . . . .21
Special DVD Features . . . . . . . . . . . . . . . . .21
Checking the contents of DVD discs: Menus .21
Title Menu . . . . . . . . . . . . . . . . . . . . . . . .21
Disc Menu . . . . . . . . . . . . . . . . . . . . . . . .21
Camera Angle . . . . . . . . . . . . . . . . . . . . .21
Changing the Audio Language . . . . . . . . . .21
Subtitles
. . . . . . . . . . . . . . . . . . . . . . . . .21
DVD Audio Discs . . . . . . . . . . . . . . . . . . . . . .22
Moving to another GROUP . . . . . . . . . . . . .22
Viewing another PAGE . . . . . . . . . . . . . . . .22
Playing an Memory Card . . . . . . . . . . . . . . .23
Playing an Audio CD or MP3/WMA Disc . . .24
Audio CD and MP3 / WMA Disc Features . .25
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Moving to another Track . . . . . . . . . . . . . .25
Repeat Track/All/Off . . . . . . . . . . . . . . . . .25
Search . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Random . . . . . . . . . . . . . . . . . . . . . . . . . .25
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . .25
3D Surround . . . . . . . . . . . . . . . . . . . . . . .25
Programmed Playback . . . . . . . . . . . . . . . .26
Repeat Programmed Tracks . . . . . . . . . . .26
Erasing a Track from Program List . . . . . .26
Erasing the Complete Program List . . . . . .26
Viewing a JPEG Disc . . . . . . . . . . . . . . . . . .27
Slide Show . . . . . . . . . . . . . . . . . . . . . . . .27
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . .27
Moving to another File . . . . . . . . . . . . . . . .27
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
To rotate picture . . . . . . . . . . . . . . . . . . . . .27
To listen to MP3/WMA music watching
Installation and Setup . . . . . . . . . .10
Setting up the Player . . . . . . . . . . . . . . . . . . . .10
DVD Player Connections . . . . . . . . . . . . . . .10
Video and Audio Connections to Your TV . .10
Audio Connection to Your TV . . . . . . . . . . .10
HDMI Connection . . . . . . . . . . . . . . . . . . . . .11
Audio Connection to Optional Equipment . .12
On-Screen Display . . . . . . . . . . . . . . . . . . . .13
Playback Status/Restrictions . . . . . . . . . . .13
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . .14
General Operation . . . . . . . . . . . . . . . . . . .14
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .14
• Menu Language . . . . . . . . . . . . . . . . . . .14
• Disc Audio / Subtitle / Menu . . . . . . . . . .14
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . .15
• TV Aspect . . . . . . . . . . . . . . . . . . . . . . .15
• Display Mode . . . . . . . . . . . . . . . . . . . . .15
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . .15
• Dolby Digital / DTS / MPEG . . . . . . . . . . .15
• Sample Freq. (Frequency) . . . . . . . . . . . .15
• 5.1 Speaker Setup . . . . . . . . . . . . . . . . . .16
• Dynamic Range Control (DRC) . . . . . . .16
• Vocal . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . .16
• PBC . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
• Auto Play . . . . . . . . . . . . . . . . . . . . . . . .16
• B.L.E. (Black Level Expansion) . . . . . . . .16
• DivX(R) VOD . . . . . . . . . . . . . . . . . . . . . .17
LOCK (Parental Control) . . . . . . . . . . . . . .18
• Rating . . . . . . . . . . . . . . . . . . . . . . . . . .18
• Password (Security Code) . . . . . . . . . . . .18
• Country Code . . . . . . . . . . . . . . . . . . . . .18
picture . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Playing a DVD VR format Disc . . . . . . . . . . .28
Maintenance and Service . . . . . . . . . . . . . . .28
Playing a DivX Movie Disc . . . . . . . . . . . . . .29
Additional Features . . . . . . . . . . . . . . . . . . .30
Last Scene Memory . . . . . . . . . . . . . . . . . .30
Screen Saver . . . . . . . . . . . . . . . . . . . . . . .30
Video Mode Setting . . . . . . . . . . . . . . . . . . . .30
Reference . . . . . . . . . . . . . . . . . . . .31
Speaker Setup . . . . . . . . . . . . . . . . . . . . . . . . .31
Controlling Your TV with the Supplied Remote . . .32
Language Codes . . . . . . . . . . . . . . . . . . . . . . .33
Country Codes . . . . . . . . . . . . . . . . . . . . . . . .33
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . .34
Specifications . . . . . . . . . . . . . . . . . . . . . . . . .35
Operation . . . . . . . . . . . . . . . . . . . .19
Playing a DVD or Video CD . . . . . . . . . . . . .19
Playback Setup
. . . . . . . . . . . . . . . . . . .19
General Features . . . . . . . . . . . . . . . . . . . . .19
Moving to another TITLE . . . . . . . . . . . . . .19
Moving to another CHAPTER/TRACK . . . .19
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Changing the Audio Channel . . . . . . . . . .19
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
About the
Symbol Display
To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.
“
” may appear on your TV display during
operation and indicates that the function explained in
this owner’s manual is not available on that specific
DVD video disc.
This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Notes on Discs
Symbol Used in this Manual
Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
The exclamation point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards likely to cause harm to the
unit itself or other material damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Note:
Indicates special notes and operating features.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Tip:
Indicates tips and hints for making the task easier.
A section whose title has one of the following symbols
is applicable only to the disc represented by the
symbol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
WMA
WMA Discs
JPEG
JPEG Discs
DivX
DivX Discs
M/C Memory Card
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Regional code
This DVD player is designed and
manufactured for playback of region “1”
encoded DVD software. This unit can
play only DVD discs labeled “1” or “ALL”.
DVD
(8 cm / 12 cm disc)
1
DVD audio discs
(8 cm / 12 cm disc)
Notes on Regional Codes
Video CD (VCD)
(8 cm / 12 cm disc)
• Most DVD discs have a globe with one or more
numbers in it clearly visible on the cover. This
number must match your DVD player’s regional
code or the disc cannot play.
Audio CD
(8 cm / 12 cm disc)
• If you try to play a DVD with a different region code
from your player, the message “Check Regional
Code” appears on the TV screen.
In addition, this unit plays Memory Card, DivX file,
DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak
Picture CDs, SVCD, and CD-R / CD-RW that contains
audio titles, MP3, WMA, and/or JPEG files.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product
incorporates copyright protection technology that is
protected by method claims of certain U.S. patents
and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is
prohibited.
This indicates a product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
Notes:
• Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
• Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
• Do not use irregularly shaped CDs (e.g., heart-
shaped or octagonal) since they may result in
malfunctions.
Notes on DVDs and Video CDs
Some playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
Manufactured under license from Dolby
Laboratories. “Dolby”, “Pro Logic”, and the
double-D symbol are trademarks of Dolby
Laboratories.
DTS and DTS Surround Out are trademarks of
Digital Theater Systems, Inc.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PBC: Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
Disc-related terms
DVD ±R / DVD ±RW
DVD -R and DVD +R are two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc only
once. DVD +RW and DVD -RW are two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38 Gigabytes and double-sided discs hold twice as
much. There are no dual layer single sided recordable
discs.
Title (DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
VCD (Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along with quality stereo sound.
Chapter (DVD video discs only)
MPEG
A chapter is a segment of a title such as a scene in a
film or one interview in a series. Each chapter is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
MPEG is an international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Group (DVD audio discs only)
MP3
MP3 is a popular compression format used for digital
audio files that yields very high near-CD quality.
The main audio content or accompanying feature
content or additional feature content, or music
album.Each group is assigned a group reference
number enabling you to locate it easily.
WMA
Windows media audio file. A type of coding / decoding
developed by Microsoft Corp.
Scene (VCD)
On a video CD with PBC (playback control) functions,
moving pictures and still pictures are divided into
sections called “scenes”. Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
JPEG
Joint Pictures Expert Group. JPEG is a compressed
file format that allows you to save images with no limit
on the number of colors.
DivX
Track
DivX is the name of a revolutionary new video codec
which is based on the new MPEG-4 compression
standard for video.You will be able to play DivX
movies using this DVD player.
A distinct element of audiovisual information, such as
the picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video (with multiple angles) and several tracks
of audio.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
POWER
Switches the player ON and OFF.
Power indicator
PLAY ( N )
Starts playback.
PAUSE ( X )
Pause playback temporarily/press repeatedly
for frame-by-frame playback.
STOP ( x ) Stops playback.
Reverse Scan/Skip ( m / . )
Go to previous chapter / track or to the
beginning. Press and hold for two seconds for fast reverse search.
Forward Skip/Scan ( > / M )
Go to the next chapter / track.
Press and hold for two seconds for fast
forward search.
OPEN / CLOSE ( Z )
Opens or closes the disc tray.
MEMORY CARD
Accesses the menu for memory card.
HDMI and indicator
Switches the HDMI mode to HDMI
(active) and OFF (inactive).
Lights green when the HDMI
is turned on.
RESOLUTION
You can change the resolution depending on
your TV.
- HDMI mode : You can switch among the
480p, 720p or 1080i resolution.
- Component mode : You can switch among
480i, 480p, 720p or 1080i resolution.
MEMORY CARD Slot
Insert a memory card.
(CF, MD, SM, MMC,
SD, MS or MS-Pro).
Disc Tray
Insert a disc here.
Display window
Shows the current status
of the player.
Remote Sensor
Point the DVD Player remote control
here.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
– front speakers connections
– rear (surround) speakers connections
VIDEO OUT
Connect to a TV with video inputs.
HDMI OUT
HDMI output providing a high quality interface for
digital audio and video.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
AC Power Cord
Plug into the power source.
Display Window
Indicates current player
function (Play, Pause)
DVD
DVD inserted
DVD A
DVD audio disc inserted
Indicates repeat mode
CD Audio CD inserted
Indicates encoding
DTS and Dolby digital
of the current disc.
VCD Video CD inserted
SVCD Super Video CD insertedd
MP3 MP3 or WMA disc inserted
CHP/TRK Indicates
current chapter or
track number
Indicates total playing
time/elapsed time
S VCD DVD A CHP
D
A
B
MP3
CD TRK
ALL
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
OPEN / CLOSE
Opens and closes the disc tray.
TV Control Buttons
TV POWER:
Turns the TV on or off.
POWER
Switches DVD Player ON and OFF.
TV PR/CH +/–:
Selects TV’s channel.
0-9 number buttons
Selects numbered items in a menu.
TV VOL +/–:
Adjusts TV’s volume.
CLEAR
Removes a track number on the
program list or a mark on the
MARKER SEARCH menu.
AV:
Selects the TV’s source.
SKIP (. / >)
SCAN ( m / M )
Search backward or forward.
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to
previous chapter or track.
PAUSE / STEP ( X )
Pauses playback temporarily/ press
repeatedly for frame-by-frame
playback.
STOP ( x )
Stops playback.
PLAY ( N )
Starts playback.
TITLE
Displays title menu, if available.
DVD MENU
Accesses menu on a DVD disc.
RETURN
Removes the setup menu,
displays the video CD with PBC.
b B v V (left/right/up/down) •
Selects an item in the menu.
• MARKER
Marks any point during
playback.
ENTER •
Confirms menu selection.
• SEARCH
Displays MARKER SEARCH
menu.
DISPLAY
Accesses On-Screen display.
AUDIO •
Selects an audio language (DVD).
• PROGRAM
Places a track on the program
list.
SUBTITLE •
Selects a subtitle language.
• ZOOM
Enlarges video image.
ANGLE •
Selects a DVD camera angle if
available
• REPEAT
Repeat chapter, track, title,
group, all.
SETUP •
Accesses or removes setup menu.
• A-B
Repeat sequence.
• RANDOM
Plays tracks in random order.
• * This button is not available.
Remote Control Operation
Point the Remote Control at the remote sensor and
press the buttons.
Remote Control Battery installation
Detach the battery cover on the rear of the
remote control, and insert two batteries
(size AAA) with
and
aligned correctly.
Do not mix old and new batteries and never
mix different types of batteries such as
standard, alkaline, etc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Setup
Setting up the Player
Notes:
• For VIDEO OUT and S-VIDEO OUT jack
connection, resolution must be set to 480i or 480p
by pressing RESOLUTION on the front panel,
however VIDEO OUT and S-VIDEO OUT is always
at 480i standard resolution.
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. If this occurs,
position the player away from the TV, VCR, or radio,
or turn off the unit after removing the disc.
• HDMI mode must be set to OFF for VIDEO OUT
and S-VIDEO OUT jack connection.
DVD Player Connections
Component Video (Color Stream®): Connect the
COMPONENT VIDEO OUT/PROGRESSIVE
SCAN jacks on the DVD Player to the
corresponding in jacks on the TV using an Y Pb Pr
cable (C).
Depending on your TV and other equipment there are
various ways you can connect the player. Please refer
to the manuals of your TV, stereo system or other
devices as necessary for additional connection
information.
Progressive Scan (ColorStream® pro):
• If your television is a high-definition or
“digital ready” television, you may take
advantage of the DVD Player’s progressive
scan output for the highest video resolution
possible.
• If your TV does not accept the Progressive
Scan format, the picture will appear scrambled
if you try Progressive Scan on the DVD Player.
Notes:
• You can change the resolution (480i, 480p, 720p,
1080i) for the component/progressive scan video
output by pressing RESOLUTION on the front
panel.
• For 720p and 1080i resolution, only non-copy
protected discs can be played back. If the disc is
copy protected, it will be displayed at the 480p
resolution.
• HDMI mode must be set to OFF for Component
video connections.
• Progressive scan does not work with the analog
video connections (VIDEO OUT & S-VIDEO).
Audio Connection to Your TV:
Video and Audio Connections to Your TV
Connect the left and right AUDIO OUT jacks of the
DVD Player to the audio left and right IN jacks on the
TV (A) using the audio cables. Do not connect the
DVD Player’s AUDIO OUT jack to the phono in jack
(record deck) of your audio system.
Make sure the DVD player is connected directly to the
TV and not to a VCR, otherwise the DVD image could
be distorted by the copy protection system.
Video: Connect the VIDEO OUT jack on the DVD
player to the video in jack on the TV using the
video cable (V).
S-Video: Connect the S-VIDEO OUT jack on the
DVD Player to the S-Video in jack on the TV using
the S-Video cable (S).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI connection
HDMI compatible TV
HDMI
If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable.
1. Connect the HDMI OUT jack on the player to the
HDMI jack on a HDMI compatible TV or monitor
(H).
H
2. Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
3. In stop mode, select HDMI mode by pressing
HDMI on the front panel.
Lights green when the HDMI is turned on.
Press RESOLUTION repeatedly to select the
resolution you wish to change to then press PLAY.
The DVD disc must not be playing in order to set
the resolution.
Rear of DVD player
About HDMI
HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
use with DVD Players, Set-Top Boxes, and other AV
devices.
HDMI was developed to provide the technologies of
HDCP (High Definition Contents Protection). HDCP is
used to protect digital content transmitted and
received.
Notes :
• No sound will be output from HDMI cable if the
AUDIO setup is not set to PCM.
• The arrow on the cable connector body should face
up for correct alignment with the connector on the
player.
HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
DTVs.
• When you use HDMI, the other connections (Yellow
VIDEO OUT, S-Video and Component Video (Y Pb
Pr)) will not work.
HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC.
• If there is noise or lines on the screen, please
check the HDMI cable.
Tip :
When you use HDMI connection, you can change the
resolution (480p, 720p, 1080i) for the HDMI output by
pressing RESOLUTION on the front panel.
480i is not available. You can only change the
resolution within your TV’s and Monitor’s resolution
capabilities.
- For S-VIDEO OUT connection, black and white
scramble signal will appear if you select an
incompatible resolution.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Amplifier equipped with 2-channel analog stereo
or Dolby Pro Logic ll / Pro Logic: Connect the left
and right AUDIO OUT jacks on the DVD Player to the
audio left and right IN jacks on your Amplifier,
Receiver, or Stereo System, using the audio cables
(A).
Audio Connection to Optional Equipment
Connect the DVD player to your optional equipment
for audio output.
Rear of DVD player
Amplifier equipped with 2-channel digital stereo
(PCM) or Audio / Video Receiver equipped with a
multi-channel decoder (Dolby Digital™, MPEG 2,
or DTS): Connect one of the DVD Player’s DIGITAL
AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your Amplifier. Use an
optional digital (optical O or coaxial X) audio cable.
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel Audio
/ Video Receiver that supports one or more of the
audio formats supported by your DVD Player such as
MPEG 2, Dolby Digital and DTS. Check the Receiver
manual and the logos on the front of the Receiver.
O
X
A
Notes:
•
If the audio format of the digital output does not
match the capabilities of your Receiver, the Receiver
produces a strong, distorted sound or no sound at all.
L
R
OPTICAL
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
• Six Channel Digital Surround Sound via a digital
connection can only be obtained if your Receiver is
equipped with a Digital Multi-channel decoder.
• To see the audio format of the current DVD in the
on-screen display, press AUDIO.
Analog connection to a multi-channel A/V receiver
with 6 Channel connectors (Dolby Digital, DTS):
This DVD Player contains a multi-channel decoder.
This enables playback of DVDs recorded in
Multi-channel Surround without the need for an
optional decoder.
Make the appropriate Sound settings for Analog
Output and Speaker Settings in the setup menu. See
page 31.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: On-Screen Display during
playing DVD Video
On-Screen Display
You can display the general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
Items
Selection Method
b
/
B
ENTER
, Numbers
Title Number
1 / 3
1. Press DISPLAY during playback.
b
/
B
ENTER
, Numbers
Chapter Number
Time search
1 / 12
2. Press v / V to select an item.
The selected item is highlighted.
Numbers, ENTER
0:20:09
3. Press b / B to change the setting. You can also
use the number buttons if appropriate (e.g.
inputting the title number). For some functions,
press ENTER to execute the setting.
Audio language
and Digital Audio
Output mode
b
AUDIO
/
B
or
b
/
B
or
Subtitle language
Angle
ABC
1 ENG
1 / 3
SUBTITLE
Notes:
• Some discs may not provide all of the features
shown below.
b
ANGLE
/
B
or
3D SUR
Sound
• If no button is pressed for 10 seconds, the on-
screen display disappears.
b
/
B
Playback Status/Restrictions
Example: On-Screen Display during
playing VCD
Title
Repeat title
A - B
Repeat sequence
Items
Selection Method
1 / 9
Enter a Marker
b
/
B, Numbers
Track Number
(or PBC mode)
1 / 3
ENTER
MARKER SEARCH
Marker Search menu
Numbers
ENTER
Time search
0:20:09
Resume play from this point
Action prohibited or not available
b
AUDIO
/
B
or
Audio Channel
Sound
3D SUR
b
/
B
Example: On-Screen Display during
playing DVD Audio
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
Items
Selection Method
b
/
B
ENTER
, Numbers
b
/
B
ENTER
, Numbers
Track Number
1 / 3
Group Number
b
/
B
ENTER
, Numbers
Numbers, ENTER
Time search
0:20:09
Track Number
Time search
Display only
or
0:20:09
Audio language
and Digital Audio
Output mode
1
b
/
B
or
MP3
AUDIO
DVD Audio
Output mode
b
AUDIO
/
B
b
/
B
or
Subtitle language
Sound
ENG
ABC
SUBTITLE
Subtitle language
Page (or Angle)
ABC
OFF
Display only
3D SUR
b
/
B
b
/
B
or
or
ANGLE
1 / 3
13
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE
Initial Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 14 to 18.
English
Original
Off
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Original
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
Move
Select
Menu Language
Select a language for the Setup menu and on-screen
display.
To go to the next level:
Press B on the Remote Control.
To go back to the previous level:
Press b on the Remote Control.
DVD-V
DVD-A
Disc Audio / Subtitle / Menu
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
General Operation
Original: Refers to the original language in which the
disc was recorded.
1. Press SETUP. The Setup menu appears.
2. Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Other: To select another language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
3. Use v / V to select the second desired option then
press B to move to the third level.
4. Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5. Press SETUP or PLAY to exit the Setup menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY
AUDIO
DISPLAY
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type
of audio system you use.
TV Aspect
16
:
9
Wide
Display Mode
Widescreen
AUDIO
Dolby Digital
DTS
Bitstream
Bitstream
PCM
MPEG
Sample Freq.
5.1 Speaker Setup
DRC
48 kHz
Select
On
Move
Select
Vocal
On
DVD-V
DVD-A
TV Aspect
Move
Select
4:3: Select when a standard 4:3 TV is connected.
DVD-V
DVD-A
DivX
Dolby Digital / DTS / MPEG
16:9 Wide : Select when a 16:9 wide TV is
connected.
Bitstream: Select “Bitstream” if you connect the
DVD Player’s DIGITAL OUT jack to an Amplifier or
other equipment with a Dolby Digital, DTS or
MPEG decoder.
DVD-V
DVD-A
Display Mode
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
PCM (for Dolby Digital / MPEG): Select when
connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital, DTS or MPEG will
be automatically downmixed to two-channel PCM
audio.
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
DVD-V
DVD-A
Sample Freq. (Frequency)
If your Receiver or Amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts any 96
kHz signals to 48 kHz so your system can decode
them.
If your Receiver or Amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without
any further processing.
Check the documentation for your Amplifier to verify
its capabilities.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OTHERS
The PBC, Auto Play, B.L.E. and DivX(R) VOD settings
can be changed.
DVD-V
DVD-A
DivX
5.1 Speaker Setup
Select speaker settings, including volume balance and
distance, or test the speaker settings.
OTHERS
Speaker settings are only active on the Analog Multi-
Channel Output. (See “Speaker Settings”, page 31.)
PBC
On
Auto Play
B.L.E.
Off
On
DivX(R) VOD
Select
Dynamic Range Control (DRC)
DVD-V
DVD-A
DivX
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Select
Move
PBC VCD
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played the same way
as Audio CDs.
DVD-V
Vocal
DVD-V
Set to On only when a multi-channel karaoke DVD is
playing. The karaoke channels on the disc mix into
normal stereo sound.
Auto Play
You can set up the DVD Player so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player will
search for title that has the longest playback time and
then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Notes:
The Auto Play function may not work for some DVDs.
B.L.E. (Black Level Expansion)
To select the black level of playback pictures. Set your
preference and monitor’s ability.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
Note:
The B.L.E. function can be operated only in 480i/ 480p
resolution.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX
DivX(R) VOD
You can display the DivX DRM (Digital Rights
Management) Registration code for your unit.
The Registration code is used for VOD (Video-On-
Demand) service agent. You can purchase or rent an
encrypt movie file.
Notes:
If you rent the DivX VOD file, it has several options of
viewing limits as shown below.
• Display the number which you can watch the file.
• The rental has been expired.
• Display the authorization error.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
LOCK
Rating
Unlock
New
1. Select Password on the LOCK menu then press B.
Password
Country Code
U S
2. Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3. Enter the new 4-digit code, then press ENTER.
Input it again to verify.
Move
Select
4. Press SETUP to exit the menu.
DVD-V
Rating
If you forget your Security Code
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer more suitable scenes as an
alternative.
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and the security
code is cleared.
The parental control feature allows you to block
access to scenes below the rating you input, thereby
preventing your children from being able to view
material you believe is unsuitable.
3. Enter a new code as described above.
DVD-V
Country Code
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the
list in the reference chapter.
1. Select “Rating” on the LOCK menu then
press B.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
1. Select “Country Code” on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character
using v / V buttons.
3. Select a rating from 1 to 8 using the v / V buttons.
5. Press ENTER to confirm your country code
selection.
Rating 1-8: Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
the disc.
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
General Features
Playing a DVD or Video CD
Notes:
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be
available on the Setup menu.
Playback Setup
1. Turn on the TV and select the video input source
connected to the DVD Player.
Moving to another TITLE/GROUP
2. Turn on the Audio System (if applicable) and
select the input source connected to the DVD
player.
DVD-V
DVD-A
When a disc has more than one title/group, you can
move to another title/group. Press DISPLAY while
playback is stopped then the appropriate number (0-9)
or use b / B to move to another title/group.
You can play any title by inputting its number while
playback is stopped.
3. Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
press PLAY.
In some cases, the disc menu might appear
instead:
Moving to another CHAPTER/TRACK
DVD-V
DVD-A
VCD
DivX
DVD-V
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to
another chapter/track as follows:
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
Press TITLE or DVD MENU to return to the menu
screen.
•
Press SKIP . or > briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
DVD-A
Use the 1 2 3 4 buttons to select an option you
want, then press ENTER to view the option.
•
•
Press SKIP . twice briefly to step back to the
previous chapter/track.
VCD
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
number or use b / B.
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating
procedures may differ. Follow the instructions on
the each menu screen. You also may set PBC to
Off (See “PBC” on page 16).
DVD-V
DVD-A
VCD
DivX
Search
Notes:
1. Press SCAN (m or M) during playback.
• If parental control is set and the disc is not within
the rating settings you must input the password.
(See “Lock Menu” on page 18.)
2. Press SCAN (m or M) repeatedly to select the
required speed.
DVD, DivX disc; X2, X4, X16 or X100
Video CD; X2, X4 or X8
• DVDs may have a region code. Your player does
not play discs that have a region code different from
your player. The region code for this player is 1
(one).
3. To exit SEARCH mode, press PLAY.
Note:
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Changing the Audio Channel VCD
Press AUDIO repeatedly during playback to hear a
different audio channel (Stereo, Left, or Right).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Picture and Frame-by-Frame Playback
DVD-V
DVD-A
VCD
DivX
Repeat
DVD-V
DVD-A
VCD
DivX
You can play a title/chapter/all/track/group on a disc.
Press REPEAT during playback to select a desired
repeat mode.
1. Press PAUSE/STEP on the remote control during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
2. To exit still motion mode, press PLAY.
Note:
• Off : does not play repeatedly.
When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
Video CDs, DivX discs - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
DVD-V
DVD-A
VCD
DivX
Slow Motion
DVD Audio Discs - Repeat Track/Group/Off
• Track: repeats the current track.
• Group: repeats the current Group.
• Off : does not play repeatedly.
1. Press PAUSE/STEP (X) during playback.
The DVD player will now go into PAUSE mode.
2. Use the SCAN (m or M) to select the required
speed: t 1/16, t 1/8, t 1/4, or t 1/2
(backward), or T 1/16, T 1/8, T 1/4, or T 1/2
(forward).
Note:
• On a Video CD with PBC, you must set PBC to Off on the
setup menu to use the repeat function (See “PBC” on
page 16).
With a DivX Disc or Video CD, the Slow speed
changes: T 1/16, T 1/8, T 1/4 or T 1/2
(forward).
• If you press SKIP (>) once during Repeat Chapter
(Track) playback, the repeat playback cancels.
3. To exit Slow Motion mode, press PLAY (N).
DVD-V
VCD
DivX
3D Surround
Notes:
To produce a 3D surround effect that simulates multi-
channel audio from two stereo speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
• Slow motion playback in reverse is not possible with
Video CDs and DivX Discs.
• When using a DVD audio disc that includes pictures,
this operation may be permitted in some picture
segments.
1. Press DISPLAY during playback.
2. Use 3 or 4 to select the sound option.
The sound option will be highlighted.
VCD
Karaoke DVD
Random
1. Press RANDOM during playback. The unit
automatically begins random playback and
RANDOM appears on the TV screen.
3. Use 1 or 2 to to select “3D SUR”.
To turn off the 3D Surround effect, select “Normal”.
2. Press RANDOM again to normal.
DVD-V
VCD
DivX
Time Search
Tip:
By pressing SKIP > during random playback, the unit
selects another title (track) and resumes random playback.
To start playing at any chosen time on the disc:
1. Press DISPLAY during playback. The time search
box shows the elapsed playing time.
Note:
2. Press v / V to select the time clock icon
and “-:--:--” appears.
On a Video CD with PBC, You must set PBC to Off on the
setup menu to use the random function
(See “PBC” on page 16).
3. Input the required start time in hours, minutes, and
seconds from left to right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
DVD-V
DVD-A
VCD
DivX
Repeat A-B
To repeat a sequence.
4. Press ENTER to confirm. Playback starts from the
selected time.
1. Press A-B at your chosen starting point. “ A
appears briefly on the TV screen.
”
*
2. Press A-B again at your chosen end point.
“A B” appears briefly on the TV screen and the
repeat sequence begins.
3. Press A-B again to cancel.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Special DVD Features
DVD-V
DVD-A
VCD
DivX
Zoom
Use zoom to enlarge the video image.
Checking the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
b B v V buttons to highlight your selection.
Then press ENTER.
1. Press ZOOM during playback or still playback to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2. Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→ 1600% size → screen fit mode → 100% size
DVD-V
DVD-A
Title Menu
Screen fit mode:
You can change the way the image appears on
the screen when you’re playing a DVD movie.
Press 3/4 to select between Normal, Enhanced,
and Maximum.
1. Press TITLE. If the current title has a menu, the
menu appears on the screen. Otherwise, the disc
menu may appear.
2. The menu offers features such as camera angles,
spoken language and subtitle options, and
chapters for the title.
3. Use the b B v V buttons to move through the
zoomed picture.
4. To resume normal playback, press CLEAR.
3. Press TITLE to exit.
Note:
• Zoom may not work on some DVDs.
DVD-V
DVD-A
Disc Menu
• Screen fit mode is available for playing the DVD disc, VR
disc and movie file.
Press DVD MENU and the disc menu is displayed.
Press DVD MENU again to exit.
DVD-V
VCD
DivX
Marker Search
DVD-V
DVD-A
Camera Angle
To enter a Marker
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
You can start playback from up to nine memorized
points. To enter a marker, press MARKER at the
desired point on the disc. The Marker icon appears on
the TV screen briefly. Repeat to enter up to nine
markers.
To Recall or Clear a Marked Scene
Tip:
1. During disc playback, press SEARCH. The marker
search menu appears on the screen.
The angle indicator will blink on the TV screen during scenes
recorded at different angles as an indication that angle
switching is possible.
2. Within 10 seconds, press b / B to select a marker
number that you want to recall or clear.
Changing the Audio Language
3. Press ENTER and playback starts from the
marked scene. Or, Press CLEAR and the marker
number is erased from the list.
DVD-V
DVD-A
DivX
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
With DVD-RW discs recorded in VR mode that have
both a main and a Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
4. You can play any marker by inputting its number
on the marker search menu.
DVD-V
DVD-A
VCD
DivX
Pause
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY.
DVD-V
DivX
Subtitles
Press SUBTITLE repeatedly during playback to see
the different subtitle languages.
Note:
• The subtitle file of the DivX file is displayed only
smi, srt and sub.
• If there is no information or there is a code that can not
read in the DivX file, “ 1 ” etc are displayed.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Audio Discs
Moving to another GROUP
DVD Audio is a new disc format building on the
success of DVD to provide high quality,
uncompressed, multi-channel audio for a new
experience in audio quality. A DVD Audio disc can be
identified by the DVD audio logo on the disc jacket or
on the disc itself.
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access
different groups during playback via the on-screen
display.
1. Press DISPLAY during playback on in stop mode.
2. Press 3/4to select Group icon.
DVD Audio can provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound can be delivered with up to 24 bits of data
(compared to 16 bits for a standard CD).
3. Press 1/2 or the numbered buttons (0-9) to select
a group number.
Note:
Sometimes the author of the disc creates hidden
content that can only be accessed by entering a
password. If the lock icon appears on the TV screen,
enter the password (sometimes you’ll find it on the
disc’s jacket cover or on a web site). This password
control isn’t dictated by your DVD Player — it is a
function of the disc.
A typical DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
used for music, either Advanced Resolution multi-
channel sound quality that is closer to the artist’s
master recording or for longer recordings. Many DVD
Audio discs contain on-screen text, such as artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
Note:
To enjoy maximum sound quality and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD Player).
If you use the DIGITAL OUT (OPTICAL or COAXIAL)
for your audio connection, the sound will only be
similar to CD-quality sound even though you’re
playing a DVD Audio disc.
Viewing another PAGE
Since DVD Audio discs can hold a lot of content, there
are various ways to see what’s available on the disc.
1. Press DISPLAY during playback.
2. Press 3/4to select Page icon.
3. Press 1/2 to select a page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc was created.
Note:
Since the authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be
available for the disc you’re playing.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Cards capable of displaying
Playing an Memory Card M/C
You can play Photo, Music, and MOVIE files in
Memory Cards with this DVD player.
Readable Cards
• SmartMedia Card (SMC)
• Compact Flash Card (CFC)
• Micro Drive (MD)
1. Insert a Memory Card until it fits into place.
• Secure Digital Card (SD)
• Multi Media Card (MMC)
• Memory Stick (MS)
2. Press MEMORY CARD on the front panel.
The Memory Card slot choice menu appears on
the TV screen.
• Memory Stick Pro (MS-Pro)
- Compatible with: FAT 12, FAT 16, or FAT 32
- Only use the memory cards recommended.
1
2
Regarding Write Protect
For cards that have a write protect switch, if the switch
is on it will not be possible to write or erase the
contents of the card.
Note:
If both slots are connected with Memory Card,
use b / B to select the desired Memory Card slot.
Notes:
• Keep the memory card out of reach of children.
If swallowed, seek medical advice immediately.
• This player can not format a memory card.
• If you insert two memory cards simultaneously into
the MS, SM, MMC, SD and MS-Pro memory cards
compatible slot, files in the memory cards cannot be
played.
• The reading time depends on file size or resolution.
• If a folder in your memory cards have more than
645 files, the whole files are not available to read.
3. Press ENTER.
The menu appears.
MUSIC
PHOTO
0:00:00
List
Program
List
Preview
Music1
Music2
Music3
Music4
Music5
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
JPEG Folder
1
2
3
4
5
>>>
Clear All
DISPLAY Info
PROGRAM Edit
MUSIC Menu
PHOTO Menu
Caution
• Do not insert or extract the smart card when
accessing the CF (Compact Flash) card.
• Before you extract your memory cards, you should
press the MEMORY CARD button to display the
DVD menu screen. Otherwise you will lose your
data in your memory card or the memory card can
be damaged.
MOVIE
0:00:00
List
Movie Folder
Movie Folder
Movie Folder
1
2
3
MOVIE Menu
4. Press MEMORY CARD or RETURN to exit the
menu.
For details on each operation item,
refer to relevant page.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD or MP3/WMA
Disc
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
The DVD player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
• The player cannot read an MP3/WMA file that has
a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as /
? * : “ < > l etc.
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
AUDIO CD
0:52:07
1 / 12
List
Program
Track1
Track2
Track3
Track4
Track5
Track6
Track7
Track8
Clear All
PROGRAM Edit
• The total number of files on the disc should be
less than 650.
MP3 / WMA
1. Press v / V to select a folder, and press ENTER
to see the folder contents.
This DVD Player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions (see
above) to ensure compatible playback.
2. Press v / V to select a track then press PLAY or
ENTER. Playback starts.
MUSIC
0:00:00
1 / 12
List
Program
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should always be sought from the copyright
owner.
Clear All
DISPLAY Info
PROGRAM Edit
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY.
[ Title, Artist, Album, Year, Comment ]
• If there is no information, “NO ID3 TAG” appear on
the display.
Tip:
• If you are in a file list on the MUSIC menu and want
to return to the Folder list, use the v / V to highlight
and press ENTER.
• Press DVD MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
MP3
M/C
WMA
Audio CD and MP3 / WMA Disc
Features
Random
1. Press RANDOM during playback. Random
Playback begins immediately and RANDOM
appears on the menu screen.
CD
MP3
M/C
WMA
Pause
2. To return to normal playback, press RANDOM
repeatedly until RANDOM disappears from the
menu screen.
1. Press PAUSE/STEP during playback.
2. To return to playback, press PLAY, ENTER or
press PAUSE/STEP again.
Tip:
By pressing SKIP > during random playback, the unit
selects another track and resumes random playback.
Moving to another Track
CD
MP3
M/C
WMA
CD
Repeat A-B
1. Press SKIP (. or >) briefly during playback
to go to the next track or to return to the beginning
of the current track.
1. To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and “A” appear on the menu screen.
2. Press SKIP . twice briefly to go back to the
previous track.
2. Press A-B again at your chosen end point. The
Repeat icon and “A-B” appear on the menu
screen, and the sequence begins to play
repeatedly.
3. You can play any track by inputting its number.
Repeat Track/All/Off
3. To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the menu screen.
CD
MP3
M/C
WMA
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The repeat
icon appears.
CD
3D Surround
2. Press REPEAT to select a desired repeat mode.
To produce a 3D surround effect that simulates
multi-channel audio from two stereo speakers (instead
of the five+ speakers normally required for
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
multi-channel audio from a home theater system).
1. Press AUDIO during playback.
“3D SUR.” appears on the menu screen.
Note:
If you press SKIP (>) once during Repeat Track playback,
the repeat playback cancels.
2. To return to normal playback, press AUDIO
repeatedly until “3D SUR.” disappears from the
menu screen.
CD
MP3
M/C
WMA
Search
1. Press SCAN (m or M) during playback.
2. Press SCAN (m or M) repeatedly to select the
required speed: X2, X4, X8 backward or forward.
3. To exit SEARCH mode, press PLAY.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD (or MUSIC)
list and then press PLAY.
1. Insert a disc.
Audio CD or MP3/WMA Discs:
AUDIO CD or MUSIC menu appears.
2. Press PROGRAM.
E
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The repeat
icon appears.
The
mark will appear to the right of the word
“Program” on the right side of the menu screen.
2. Press REPEAT to select a desired repeat mode.
Note:
Press PROGRAM again, then the
disappear to exit the Program Edit mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
E
mark will
Note:
If you press > once during Repeat Track playback,
the repeat playback cancels.
MUSIC
0:00:00
AUDIO CD
0:52:07
1
/
12
1
/
12
List
List
E
E
Program
Track5
Program
2-Music2
Track1
Track2
Track3
Track4
Track5
Track7
Track4
Track1
4-Music4
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
6-Music6
1-Music1
Track6
Track7
Track8
Erasing a Track from “Program” List
Clear All
Clear All
PROGRAM Edit
DISPLAY Info
PROGRAM Edit
1. Use v V B to select the track that you wish to
erase from the Program list.
AUDIO CD Menu
MUSIC Menu
2. Press CLEAR. Repeat to erase additional tracks
on the list.
Video CD: Press PROGRAM while playback is
stopped. The program menu appears. Press
PROGRAM again to exit the menu.
Erasing the Complete Program List
1. Press B to move to the “Program” list.
Note:
On a Video CD with PBC, you must set PBC to Off on
the setup menu to use the programmed playback
(See “PBC” on page 16).
2. Use v / V to select “Clear All”, then press ENTER.
Note:
The programs are also cleared when the disc is
removed.
VIDEO CD
List
Track1
E
Program
Track5
Track2
Track3
Track4
Track5
Track2
Track3
Track1
Clear All
VIDEO CD Menu
3. Select a track on the “List”, then press ENTER to
place the selected track on the “Program” list.
Repeat to place additional tracks on the list.
4. Press B.
Select the track you want to start playing on the
“Program” list.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
M/C
Viewing a JPEG Disc
Zoom
Use Zoom to enlarge the photo image.
(see 21 page)
Using this DVD Player you can view Kodak PICTURE
CDs and discs with JPEG files.
1. Insert a disc and close the tray. The PHOTO menu
appears on the TV screen.
To rotate picture
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
PHOTO
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
To listen to MP3/WMA music watching picture
JPEG
>>>
You can display files while listering to MP3/WMA
music files recorded on the same disc.
1. Insert the disc containing the two types of file in
the player.
2. Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list, use the v / V buttons on the remote to
2. Press TITLE to display PHOTO menu.
3. Press v / V to select a photo file.
4. Use B to select
icon then press ENTER.
highlight
and press ENTER.
Playback starts. The playback will continue until
STOP is pressed.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or PLAY.
Viewing the file proceeding starts.
Tip:
To listen to only the desired music watching picture,
programmed the desired tracks from the “MUSIC”
menu and then proceed as above.
While viewing a file, you can press STOP to move
to the previous menu (PHOTO menu).
Tip:
• Press DVD MENU to move to the next page.
Note:
The files on a memory card are not available for this
function.
• There are three Slide Speed options
(Normal) and > (Slow).
Use v V b B to highlight the Speed. Then, use b / B to
: >>> (Fast), >>
select the option you want to use then press ENTER.
JPEG disc compatibility with this player is
limited as follows:
• On a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc’s contents. If you don’t see an on-
screen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
2048 pixels and burn another disc.
• Press RETURN, information of file is hidden.
JPEG
M/C
Slide Show
Use v V b B to highlight the
press ENTER.
(Slide Show) then
• The total number of files and folders on the disc
should be less than 650.
JPEG
M/C
Still Picture
1. Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
• Some discs may be incompatible due to a
different recording format or the condition of disc.
2. To return to the slide show, press PLAY or press
PAUSE/STEP again.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
JPEG
M/C
Moving to another File
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
Press SKIP (. or >) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
• File names without “.jpg” extension will not be
able to be read by this DVD Player. Even though
the files are shown as JPEG image files in
Windows Explorer.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DVD VR format Disc
Maintenance and Service
This unit will play DVD-R/RW discs recorded using
the DVD-Video format that have been finalized using
a DVD-Recorder.
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
• This unit will play DVD-RW discs recorded using
the Video Recording (VR) format.
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
1. Insert a disc and close the tray. The DVD-VR
menu appears on the TV screen.
DVD-VR
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
•
Do not leave rubber or plastic products in contact
with the unit for a long period of time. since they
leave marks on the surface.
2. Press v / V to select a track then press PLAY or
ENTER and playback starts.
Cleaning the unit
Note:
• Unfinalized DVD-R/RW discs cannot be played in this
player.
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
• Some DVD-VR disc are made with CPRM data by DVD
RECORDER. Player does not support these kinds of discs
and display the “CHECK DISC”.
Do not use strong solvents such as alcohol, benzine,
or thinner, as these might damage the surface of the
unit.
What is ‘CPRM’?
CPRM is a copy protection system (with scramble system)
only allowing the recording of ‘copy once’ broadcast
programs. CPRM stands for Content Protection for
Recordable Media.
CPRM recordings can only be made on DVD-RW discs
formatted in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with
Maintaining the Unit
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
CPRM.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of use.
For details, please contact your nearest authorized
service center.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a DivX Movie Disc
DivX disc compatibility with this player is limited
as follows:
Using this DVD Player you can play DivX disc.
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1. Insert a disc and close the tray. The MOVIE
menu appears on the TV screen.
• The file name of the DivX subtitle is limited to
characters.
MOVIE
0:00:00
List
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the
display.
Movie Folder 1
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
Movie Folder 8
• If the number of the screen frame is over 30
frames per second, this unit may not operate
normally.
2. Press v / V to select a folder, and press
ENTER. A list of files in the folder appears. If
you are in a file list and want to return to the
Folder list, use the v / V buttons on the
• If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
• If the file is recorded with GMC, the unit
supports only 1-point of the record level.
GMC?
remote to highlight
and press ENTER.
*
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
3. If you want to view a particular file, press
v / V to highlight a file and press ENTER or
PLAY.
4. Press STOP to exit.
Playable DivX file
Tip:
• Press DVD MENU to move to the next page.
z ".avi ", ".mpg ", ".mpeg "
• On a CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
Playable Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
is highlighted.
Playable Audio format
Note:
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
When the bitrate of video signal on a DivX file stored
in a memory card is over 2Mbps, it can be displayed
like a still image.
• Bit rate: within 8 - 320kbps (MP3),
32 - 192kbps (WMA)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Mode Setting
Additional Features
•
With certain discs, the playback picture may be
flickering or Dot Crawl is shown on straight lines. That
means Vertical interpolation or De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
Last Scene Memory
VCD1.1
DVD-V
DVD-A
CD
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
memorized, the scene is automatically recalled.
• To change the video mode, press and hold OSD
about 3 seconds during disc playback. The new
video mode number selected is displayed on the TV
screen. Check whether the video quality has
improved. If not, repeat the above procedure until
picture quality is improved.
Note:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
• Video mode change sequence:
MODE1 → MODE2 → MODE3 → MODE1
Screen Saver
The screen saver appears when you leave the DVD
player in Stop mode for about five minutes. If the
Screen Saver is displayed for five minutes, the DVD
Player automatically turns itself off.
• If you turn off the power, the video mode will be
back to initial state (MODE1).
Detailed Descriptions for Video Modes
MODE1: The source material of the DVD video (film material
or video material) is determined from disc information.
MODE2: Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE3: Suitable for playing video based content with
comparatively little motion.
Note:
The video mode setting only works when HDMI mode
is set to “OFF” and selected resolution is 720p mode
in component video connection.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
This chapter includes important reference information
to help you set your DVD player.
If you have connected the system to a speaker
without a low frequency of 100Hz or below, select
“Small.” If you have not connected a subwoofer,
always select “Large” for Front speaker (L/R).
Speaker Setup
When you do not have a certain speaker connected,
select “None.”
Make the following settings for the built-in 5.1 channel
surround decoder.
Front L/R speaker’s size can be set to “Large” or
“Small.”
AUDIO
If Front L/R speaker’s size is set to “Small,” Rear and
Center speaker’s size can be set to “Small” or “None.”
Speaker
Size
Front L
Large
0
Subwoofer’s size can be set only to “Large” or “None”.
dB
Volume
Distance
Test
m(ft)
0.6(2)
Off
Volume
Select
Move
Return
Enter
Press b / B to adjust the output level of the selected
speaker. (-10dB - 0dB)
1. Press SETUP. The setup menu appears.
Distance
2. Use v / V to select the AUDIO option then press
B to move to the second level.
If you connected speakers to your DVD Player, setting
the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
3. Use v / V to select the Speaker Setup option then
press B to move to the third level. “Select” is
highlighted.
4. Press ENTER and 5.1 Speaker Setup menu
appears.
Press b / B to adjust the Distance of the selected
speaker.
[0.3m(1ft) - 6.0m(20ft)]
5. Use b / B to select the desired speaker.
6. Adjust options using v / V / b / B buttons.
Test
7. Press ENTER to confirm your selection. Returns to
the previous menu.
Press b / B to test the signals of each speaker. Adjust
the volume to match the volume of test signals
memorized in the system.
Speaker selection
Front Left (L) → Center → Front Right (R)
→ Rear Left (R) → Rear Right (L) → SubWoofer
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
You can adjust the volume during operating the test
tone, first use v / V to select Volume or Speaker
option then use b / B buttons to select volume or
speaker, so that all speaker’s volume is same from
the listener’s position.
Size
During operating the test tone, if you adjust the
volume, it will be paused in the current speaker
channel.
Press b / B to set a mode. (Large, Small or None)
If you have connected the system to a speaker with a
low frequency of 100Hz or below, select “Large.”
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling Your TV with the Supplied
Remote
You can control the sound level, input source, and
power switch of your LG TV with the supplied remote.
Code numbers of controllable TVs
If more than one code number is listed, try entering
them one at a time until you find the one that works
with your TV.
You can control your TV using the buttons below.
Manufacturer
ADMIRAL
AIWA
Code Number
Manufacturer
MONTGOMERY
WARD
Code Number
01,06,08,09
23,24,32,33,34
01,08
16,33,37,44,45
70
AKAI
01
NEC
AMARK
09
NOBLEX
07
AOC
01
PACKARD BELL 43
BELL & HOWELL
BROKSONIC
CANDLE
CCE
33
PANASONIC
PHILCO
07,11,13,25,35,36
18,19
01,06,07,08,09,
15,38,43,58
06,07,43,61,62,65
30
51
TV Control
Buttons
07
PHILIPS
CENTURION
CINERAL
CITIZEN
08
PIONEER
PORTLAND
PROSCAN
QUASAR
RADIO SHACK
RCA
43
09
49,50,51,52,53,54,55
03,37,44
11,13
CORONADO
CROWN
09
09
16,17,23
01,03,37,44,69
16,17,23
08
CURTIS MATHES
DAEWOO
DAYTRON
EMERSON
FISHER
01,03,08,33,35,37,44
16,38,39,40,41,42,43
01,08
REALISTIC
SAMPO
01,09,16,17,18,19
28,29
SAMSUNG
SANYO
01,08,09,25,68
28,29
FUNAI
46,47
SCOTT
01,08
GENERAL ELECTRIC 03,10,11,13,37,44
SEARS
09,25,26,27,28,29
64
GRADIENTE
HITACHI
JC PENNEY
JVC
01,56,57,63,67
09,14,15,43
01,08,10,27,35
20,21,63,67
43
SEMP
SHARP
09,22,23,24,60,66
01,06,08,09,10,
23,24,33,34
12,62
SIGNATURE 2000
KIOTE
SONY
KMC
09
SOUNDESIGN
SYLVANIA
51
KTV
01,08,09,31
01,04,05,06,07,
08,35,51
46,47
By pressing
POWER
AV
You can
LG (GOLDSTAR) 01,07,08,09,35,39,40
Turn the TV on or off.
LODGENET
LOGIK
33
SYMPHONIC
TATUNG
TEKNIKA
TELERENT
THOMSON
YORX
33
11
Switch the TV’s input source
between the TV and other input
sources.
LXI
09,24,25,26,27,28,29
01,02,04,05,06,
07,08,09,20,
34,35,43,51,61,62,65
33
07,09,16,33,51
09,33
MAGNAVOX
69
08
PR/CH +/–
VOL +/–
Note:
Scans up or down through
memorized channels.
MAJESTIC
TOSHIBA
WARDS
01,25,26,27,64
01,06,08,09,10,33,34
48
MARANTZ
01,32
MEMOREX
MGA/MITSUBISHI
33
XR1000
Adjust the volume of the TV.
01,08,32,34
ZENITH
01, 02,33,59
Notes:
Depending on the unit being connected, you may not
be able to control your TV using some of the buttons.
• Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
Controlling other TVs with the remote
• If you enter a new code number, the code number
previously entered will be erased.
You can control the sound level, input source, and
power switch of non-LG TVs as well. If your TV is
listed in the table below, set the appropriate
manufacturer code.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
1. While holding down TV POWER button, press
the number buttons to select the manufacturer
code for your TV (Refer to table on the right
column).
2. Release TV POWER button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
Language
Fiji
Finnish
French
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Marathi
Moldavian
Mongolian
Nauru
Bengali; Bangla
Bhutani
Bihari
Hebrew
Hindi
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
8279
8285
8377
8365
7168
8382
8372
8378
8368
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Country Codes
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Code
AF
AR
AU
AT
Country
Ethiopia
Fiji
Code
ET
FJ
Country
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands NL
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Code
MY
MV
MX
MC
MN
MA
NP
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Kuwait
Libya
Luxembourg
PT
RO
LU
El Salvador
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Possible Cause
Correction
Symptom
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
No power.
• No disc is inserted.
• Insert a disc. (Check that the DVD or
audio CD indicator in the display
window is lit.)
The power is on, but
the DVD player does
not work.
• The TV is not set to receive DVD
signal output.
• Select the appropriate video input
mode on the TV.
No picture.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The HDMI mode is on.
• Set HMDI on the front panel to OFF.
• Check TV capability.
• Unit output setting and TV resolution
capabilities mismatch.
• Check mode of connections
(eg. S-Video, Component etc.).
• Check unit Resolution setting
according to TV capability and mode of
connection.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
No sound.
•
The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with
the audio cable.
• The AUDIO options are set to the
wrong position.
• Set the Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
• Select the proper audio setting in
AUDIO setup.
• The Digital Audio Output mismatch
with the amplifier.
• Insert a playable disc. (Check the disc
type, color system, and regional code.)
• An unplayable disc is inserted.
The DVD player does
not start playback.
• Cancel the rating function or change
the rating level.
• The rating level is set.
• Point the Remote Control at the
remote sensor of the DVD player.
• The Remote Control is not pointed at
the remote sensor on the DVD player.
The Remote Control
does not work properly.
• Operate the Remote Control closer to
the DVD player.
• The Remote Control is too far from the
DVD player.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
DIGITAL OUT (COAXIAL):
0.5 V (p-p), 75 Ω, RCA jack x 1
General
Power requirements: AC 120 V , 60 Hz
Power consumption: 12W
DIGITAL OUT (OPTICAL):
3 V (p-p), 75 Ω, Optical onnector x 1
Dimensions (Approx.):
430 x 39 x 242 mm (W x H x D) without feet
System
Weight (Approx.): 2.2 kg
Laser:
Semiconductor laser, wavelength 650 nm
Operating temperature:
5 °C to 35 °C (41 °F to 95 °F)
Signal system: NTSC
Operating humidity: 5 % to 90 %
Frequency response:
DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Outputs
VIDEO OUT:
1 Vp-p 75 Ω, negative sync, RCA jack x 1
Signal-to-noise ratio:
> 100 dB (ANALOG OUT connectors only)
S-VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
Harmonic distortion: < 0.008% THD
Dynamic range:
> 90 dB (DVD/CD)
COMPONENT VIDEO OUT:
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
Accessories:
Video cable (1), Audio cable (1), Remote Control (1),
Batteries (2)
AUDIO OUT:
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
Note: Design and specifications are subject to change prior notice.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
LG Electronics, Inc.
Limited Warranty - USA
This LG Electronics product, will be repaired or replaced, at LG’s option, if it proves to be defective in material or
workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date
(“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser
of the product and effective only when used in the United States, excluding U.S. Territories.
WARRANTY PERIOD:
HOW SERVICE IS HANDLED:
LABOR: 90 days from the Date of Purchase.
Call 1-800-243-0000 for instructions on getting the
defective unit repaired or replaced.
PARTS: One Year from the Date of Purchase.
Please retain dated sales receipt and your box to
return the unit to LG for repair or replacement.
* Parts replaced are warranted for the remaining portion
of the original warranty period.
Shipping both ways will be paid by LG during the first
90 days of the Warranty Period. During the remainder
of the Warranty Period (91~365 days), you pay inbound
shipping charges and LG pays return shipping charges.
THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT ANY IMPLIED
WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE. LG
ELECTRONICS WILL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL OR PUNITIVE
DAMAGES OF ANY NATURE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST REVENUES OR PROFITS, LOST OR CORRUPTED PROGRAMMING OR DATA, OR ANY OTHER DAMAGE
WHETHER BASED IN CONTRACT, TORT OR OTHERWISE. Some states do not allow the exclusion or limitation of incidental or
consequential damages or limitation on how long an implied warranty lasts, so the above exclusion or limitation may not apply to
you. This warranty gives you specific legal rights and you may also have other rights that may vary from state to state.
THIS LIMITED WARRANTY DOES NOT APPLY TO:
•
Damages or operating problems that result from shipping, installation, adjustment of user controls,
calibration, maintenance or failure to maintain, or separate system components; and
•
Damages or operating problems that result from normal wear and tear, misuse, abuse, operation outside
environmental specifications or contrary to the requirements or precautions in the Operating Guide, accident,
lightning strikes or other natural causes, unauthorized modification or alteration, incorrect electrical current
or voltage, signal reception or input, software not licensed directly by LG, software errors that do not disable
functionality, operating and software protocols adopted after the date of manufacture or for outside the US,
institutional or commercial use, or other causes not arising out of defect in material or workmanship.
The cost of repair or replacement under these excluded circumstances shall be borne by the consumer.
CUSTOMER INTER-ACTIVE CENTER NUMBERS:
For Warranty Service, Where to buy, Product
Assistance, or Customer Assistance
Call 1-800-243-0000 (24 hours a day, 365 days per year)
and select appropriate options from the menu.
Or visit our website at http://www.lgservice.com
LG ELECTRONICS U.S.A., INC.
1000 SYLVAN AVENUE
P/N : 3835RD0037D
Issue O
ENGLEWOOD CLIFFS, NJ
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|