OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
72WX70MF
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSES
3
LICENSES
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Video-
on-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are trademarks of Dolby Laboratories.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ASSEMBLING AND PREPARING
ASSEMBLING AND PREPARING
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
POWER
MONITOR
ON
OFF
ENERGY INPUT
SAVING
ꢀ
ꢃ
.
,
!
ꢁ
ABC
JKL
TUV
ꢂ
ꢅ
ꢈ
DEF
GHI
ꢄ
ꢇ
ꢉ
MNO
WXYZ
ꢆ
PQRS
1/a/A
CLEAR
-
*
#
MARK
ARC
P
A
G
E
BRIGHT
NESS
PSM
MUTE
AUTO
S.MENU
MENU
OK
BACK
TILE
EXIT
ID
ON
OFF
Remote Control and Batteries
Power Cord
* The power cord may not be provided
depending on the region you purchased
the product.
CD (Owner's Manual,
IR Expansion PCB
D-sub 15-Pin Signal Cable
SuperSign Elite-w,
SuperSign Elite-c Program/
SuperSign Manual) / Cards
CAUTION
Do not use any pirated items to ensure the safety and product life span.
Any damages or injuries by using pirated items are not covered by the warranty.
y
y
NOTE
The accessories supplied with your product may vary depending on the model.
Product specifications or contents in this manual may be changed without prior notice due to upgrade
of product functions.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLING AND PREPARING
5
Parts and Buttons
Illuminance sensor/
IR Receiver
Power Indicator
RGB/AV
USB IN
DP IN
DVI OUT
AUDIO IN
LAN
DVI IN
/COMPONENT IN
EXT IR IN
RS-232C IN
RS-232C OUT
SPEAKER
Connection panel
Screen Marks
IR Receiver
Description
This is where the unit receives signals from the remote control.
Power Indicator
This Indicator lights up red when the display operates normally(on mode). If the display
In sleep mode (In Power Saving mode), this indicator color changes to amber.
Illuminance sensor
Adjusts the screen brightness by measuring the amount of light.
NOTE
You can set the Power indicator to on or off by selecting OPTION in the main menu.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ASSEMBLING AND PREPARING
Portrait Layout
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
Pemnut Not to be Used
If you use pemnut arbitrarily, the product may be damaged.
Back of the Product
Pemnut
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
7
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
may damage the remote control.
Make sure to point the remote control at the
remote control sensor on the Monitor.
y
y
ENERGY SAVING
(POWER)
Turns the Monitor on or off.
Adjusts the brightness of
the screen to reduce energy
consumption.
POWER
MONITOR ON / OFF
Turn off the monitor and then
turn it back on.
INPUT
Selects the input mode.
MONITOR
ENERGY INPUT
SAVING
OFF
ON
1/a/A Button
This button selection is not
applicable.
ꢀ. , ! ꢁABC ꢂDEF
ꢃGHI ꢄJKL ꢅMNO
ꢆ ꢇTUV ꢈWXYZ
Number and Alphabet Buttons
Enters numbers.
The alphabet selection is not
applicable.
ARC
Selects the Aspect Ratio Mode.
MARK
Selects a specific file in the USB
mode.
PQRS
CLEAR
This button selection is not
applicable.
1/a/A
CLEAR
ꢉ- * #
MARK
Volume Up / Down
ARC
Adjusts the volume level.
P
A
G
E
BRIGHT
NESS
PSM
MUTE
BRIGHTNESS Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to move
to the next file list.
PSM
Selects the Picture Status
Mode.
AUTO
MENU
MUTE
Mutes all sounds.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
REMOTE CONTROL
MENU
Accesses the main menus
or saves your input and exit
menus.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
Navigation Buttons
Scrolls through menus or
options.
NESS
E
UTE
AUTO
S.MENU
MENU
S.MENU
OK
(SuperSign Menu Key)
This button selection is not
applicable.
Selects menus or options and
confirms your input.
OK
BACK
Allows the user to move back
one step.
EXIT
BACK
EXIT
TILE
Clears all on-screen displays
and returns to Monitor
viewing from any menu.
ID
ON
OFF
TILE
Selects the TILE Mode.
ID ON/OFF
When more than one monitor
is present in the same room,
this allows you to control them
individually.
USB Menu Control Buttons
Controls media playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR
9
USING THE MONITOR
Connecting to a PC
CAUTION
Your Monitor supports the Plug & Play* feature.
Connect the signal
y
input cable and tighten
it by turning the screws
clockwise.
* Plug & Play: This is the function that allows a PC
to use the monitor without installing a driver.
Do not press the
y
screen with your finger for a long time as
this may result in temporary distortion on the
screen.
Avoid displaying a fixed image on the screen
for a long period of time to prevent image
burn. Use a screensaver if possible.
y
NOTE
It is recommended to use the Monitor with
the HDMI connection for the best image
quality.
Use a shielded signal interface cable, such
as D-sub 15-pin signal cable and DVI cable,
with a ferrite core to maintain standard
compliance for the product.
y
y
If you turn the monitor on when the set
becomes cold, the screen may flicker. This
is normal.
Some red, green, or blue spots may appear
on the screen. This is normal.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
10 USING THE MONITOR
RGB Connection
DVI-D Connection
Transmits the analog video signal from your PC to
the monitor. Connect the PC and the monitor
set with the 15-pin signal cable as shown the
following illustrations.
Transmits the digital video signal from your PC to
the monitor. Connect the PC and the monitor
set with the DVI cable as shown the following
illustrations.
Select RGB input source on the monitor.
Select DVI-D input source on the monitor.
Back of the Product
Back of the Product
RGB/AV
/COMPONENT IN
AUDIO IN
AUDIO IN
DVI IN
(not included)
(not included)
(not included)
Macintosh
Adapter
(not included)
PC/MAC
PC
PC
PC
NOTE
Use the standard Macintosh
y
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
connect to this monitor. Call or visit their web
site for more information.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 11
HDMI Connection
Display Port Connection
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the HDMI cable as shown in the
following illustrations.
Transmits the digital video and audio signals from
your PC to the monitor. Connect the PC and the
monitor with the Display Port cable as shown in
the following illustrations.
Select HDMI input source.
Select Display Port input source.
Back of the Product
Back of the Product
DP IN
(not included)
(not included)
PC
PC
NOTE
Use a High Speed HDMI™ Cable.
Please check the PC environment if you
cannot hear the sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
y
y
If you want to use HDMI PC mode, you must
set PC/DTV to PC mode.
When HDMI PC is used, a compatibility
problem might occur.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
12 USING THE MONITOR
Customizing Image Options
Adjusting the Screen
Customize basic and advanced options of each
image mode for the best screen performance.
Selecting an Image Mode
Display images in its optimized settings by
selecting one of the preset image modes.
Press MENU to access the main menus.
1
2
Press the navigation buttons to scroll to
PICTURE and press OK.
Press MENU to access the main menus.
1
2
Press the navigation buttons to scroll to
PICTURE and press OK.
Press the navigation buttons to scroll to
Picture Mode and press OK.
3
4
5
Press the navigation buttons to scroll to
Picture Mode and press OK.
3
4
Press the navigation buttons to scroll to an
image mode you want and press OK.
Press the navigation buttons to scroll to an
image mode you want and press OK.
Select and adjust the following options, and
then press OK.
Mode
Vivid
Description
Option
Description
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, color, and sharpness.
Backlight
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Standard
Cinema
Adjusts the image for a normal
environment.
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright parts of the
picture are saturated.
Sport
Game
Optimizes the video image for high and
dynamic actions by emphasizing primary
colors such as white, grass, or sky blue.
Brightness
Sharpness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark areas of the picture are
saturated.
Optimizes the video image for a fast
gaming screen such as PCs or games.
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Color
Tint
Adjusts intensity of all colors.
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Control
Customizes the advanced options.
Refer to the Advanced image options.
Picture Reset Restores the options to the default
setting.
When you are finished, press EXIT.
6
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 13
Customizing PC Display Options
Adjusting the Sound
Customize options of each image mode for the
best image quality.
Selecting an Sound Mode
This Monitor has 5 preset sound modes to
compliment different types of video content.
This function works in the following mode:
RGB [PC] mode.
y
Press MENU to access the main menus.
1
2
Press MENU to access the main menus.
1
Press the navigation buttons to scroll to AUDIO
and press OK.
Press the navigation buttons to scroll to
PICTURE and press OK.
2
3
4
Press the navigation buttons to scroll to Sound
Mode and press OK.
3
4
Press the navigation buttons to scroll to Screen
and press OK.
Press the navigation buttons to scroll to a
sound mode you want and press OK.
Select and adjust following options, and then
press OK.
Option
Description
Mode
Description
Resolution Selects a proper resolution. See
Standard
Select when you want standard-quality
sound.
“Customizing PC display options”.
Auto
Adjusts the screen position, clock, and
phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Music
Cinema
Sport
Select when you listen to music.
Select when you watch movies.
Select when you watch sport events.
Selects when you play games.
Config.
Game
Position/
Adjusts the options when the picture is
not clear, especially when characters are
shaky. Run Auto Config. before adjusting
these.
Size/Phase
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Reset
Restores the options to the default
setting.
When you are finished, press EXIT.
5
When you return to the previous menu, press
BACK.
Download from Www.Somanuals.com. All Manuals Search And Download.
14 USING THE MONITOR
Customizing Sound Options
Using Additional Options
You may customize options of each sound mode
for the best sound quality.
Adjusting Aspect Ratio
Press MENU to access the main menus.
1
2
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
content.
Press the navigation buttons to scroll to AUDIO
and press OK.
Press the navigation buttons to scroll to Sound
Mode and press OK.
3
4
5
CAUTION
Press the navigation buttons to scroll to a
sound mode you want and press OK.
If a fixed image displays on the screen for a
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is image burn or burn-in and not
covered by the warranty.
If the aspect ratio is set to 4:3 for a long
period of time, image burn may occur on the
letterboxed area of the screen.
y
y
Select and adjust following options, and then
press OK.
Option
Description
LG's Infinity Sound option provides 5.1
channel stereo quality sound from two
speakers.
Infinite
Sound
Treble
Bass
Controls the dominant sounds in the
output. When you turn up the treble, it
will increase the output of the higher
frequency range.
NOTE
You can also change the image size by
accessing the main menus.
y
Controls the softer sounds in the
output. When you turn up the bass, it
will increase the output of the lower
frequency range.
Reset
Resets the sound mode to the default
setting.
AV Component RGB Display
Port
DVI-D
HDMI
MODE
ARC
16:9
PC DTV PC DTV PC DTV PC
When you are finished, press EXIT.
6
o
x
x
o
o
o
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
When you return to the previous menu, press
Just Scan
1:1
BACK.
4:3
Zoom
Cinema
Zoom1
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MONITOR 15
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen (useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image.
Note: If there is noise in original picture, You can
see the noise at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom 1 : Choose Cinema Zoom
when you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
Download from Www.Somanuals.com. All Manuals Search And Download.
16 USING THE MONITOR
Using the Input List
Selecting an input source
Press INPUT to access the input source list.
1
- The connected device displays on each input
source.
Press the Navigation buttons to scroll to one of
the input sources and press OK.
2
Input source
AV
Description
Watch video from a VCR or other
external devices.
Component Watch content from a DVD or other
external devices, or through a
digital set-top box.
RGB
View a PC display on the screen.
Display Port Watch content from a PC, DVD
of Digital set-top box other high
definition devices.
DVI-D
HDMI
View a PC display on the screen.
Watch content from a PC, DVD
of Digital set-top box other high
definition devices.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 17
ENTERTAINMENT
To set up the network seetings: (Even if your dis-
play has already connected automatically, running
setup again will not harm anything),
Connecting to a Wired Network
(Depending on model)
1 Press MENU to access the main menus.
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustra-
tion and set up the network settings.
This monitor only supports a wired network con-
nection.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Network
Setting and press OK.
After making a physical connection, a small
number of home networks may require the display
network settings to be adjusted. For most home
networks, the display will connect to automatically
without any adjustments.
4 If you already set network setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
- If selecting IP Manual Setting, press the
Navigation and Number buttons. IP address-
es will need to be input manually.
For detail information, contact your internet pro-
vider or router manual.
- IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be deter-
mined.
LAN
LAN
WAN
Router
6 When you are finished, press EXIT.
ETHERNET
@
Cable modem
Internet
CAUTION
CAUTION
y Do not connect a modular phone cable to the
LAN port.
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
y Network setting menu will not be available
until the display is connected to physical
network.
y Since there are various connection meth-
ods, please follow the specifications of your
telecommunication carrier or internet service
provider.
Download from Www.Somanuals.com. All Manuals Search And Download.
18 ENTERTAINMENT
y A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow for
such a connection, you will not be able to con-
nect the display.
NOTE
y If you want to access the Internet directly on
your display, the internet connection should
always be on.
y A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices you
can connect at the same time. (If your ISP limits
sub scription to one device, this display may
not be allowed to connect when a PC is already
connected.)
y If you cannot access the Internet, check
the network conditions from a PC on your
network.
y When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
y If you do not complete the network settings,
the network may not work properly.
y The use of a Router may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Tips for Network setting
y Use a standard LAN cable with this display. Cat5
or better with a RJ45 connector.
y Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
home network, quickly power off and/or discon-
nect the power cable of the home network router
or cable modem. Then power on and/or connect
the power cable again.
y Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable
terms of service. For details, contact your ISP.
y LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions as-
sociated with your internet connection, or other
connected equipment.
Network Status
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to NET-
WORK and press OK.
3 Press the navigation buttons to select Network
Status.
y LG is not responsible for problems within your
internet connection.
4 Press OK to check the network status.
y You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
y Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
Internet connection.
y Any fees charged by an ISP including, without
limitation, connection charges are your respon-
sibility.
5 When you are finished, press EXIT.
Option
Setting
Description
Return to the network setting menu.
Test the current network status after
Test
setting the network.
Close
Return to the previous menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 19
Tips for using USB storage devices
Connecting USB Storage Devices
y Only a USB storage device is recognizable.
y If the USB storage device is connected
through a USB hub, the device is not recog-
nizable.
You can connect USB storage devices such as
a USB flash memory, external hard drive to the
display and use multimedia features .
Connect a USB flash memory or USB memory
card reader to the Display as shown on the follow-
ing illustration. The My media screen appears.
y A USB storage device using an automatic
recognition program may not be recognized.
y A USB storage device which uses its own
driver may not be recognized.
y The recognition speed of a USB storage
device may depend on each device.
y Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
or
y Please do not connect the USB storage device
which was artificially maneuvered on the PC.
The device may cause the product to malfunc-
tion or fail to be played. Never forget to use
only a USB storage device which has normal
music files, image files, or movie files.
y Please use only a USB storage device which
was formatted as a FAT32 file system or
NTFS file system provided with the Win-
dows operating system. In case of a storage
device formatted as a different utility program
which is not supported by Windows, it may
not be recognized.
CAUTION
y Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
y Do not turn the display off or remove a USB
storage device while the EMF (my media)
Menu is activated, as this could result in
loss of files or damage to the USB storage
device.
y Back up your files saved on a USB storage
device frequently, as you may lose or dam-
age the files and this may be not covered by
the warranty.
y Please connect a USB storage device with
the cable offered by the device maker.
y Some USB storage devices may not be sup-
ported or operated smoothly.
y File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
y Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
Download from Www.Somanuals.com. All Manuals Search And Download.
20 ENTERTAINMENT
y If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
Browsing Files
Access the photo, music, or movie lists and browse
files.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
y If your USB memory device has multiple
partitions, or if you use a USB multi-card
reader, you can use up to 4 partitions or USB
memory devices.
Connect a USB storage device.
1
2
3
Press MENU to access the main menus.
Press the navigation buttons to scroll to My
Media and press OK.
Press the navigation buttons to choose
from Movie List, Photo List, Music List, or
Contents List and press OK.
4
y If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
y If the USB memory device does not work
properly, disconnect and reconnect it.
y How fast a USB memory device is detected
differs from device to device.
Movie List
Photo List
Music List
Contents List
y If the USB is connected in Standby Mode,
specific hard disk will automatically be
loaded when the display is turned on.
y The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
less for USB memory.
1
2
Page 1/1
Photo List
Page 1/1
009
Drive1
USB External
4
5
001
010
002
003
012
004
013
005
006
015
007
008
y Any device with more than the recommended
capacity may not work properly.
011
014
y If a USB external hard disk with a Energy
Saving function does not work, turn the
hard disk off and on again to make it work
properly.
Move
View
Page Change
Mark
Change Numbers
Mark Mode
Exit
To Music List
3
y USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
No.
Description
Moves to upper level folder
Current page/Total pages
1
y Maximum of 999 folders or files can be rec-
ognized under one folder.
2
3
Corresponding buttons on the
remote control
Current page/ total pages of
contents under the folder
y It is recommended to use a certified USB
storage device and cable. Otherwise, a USB
storage device may not be detected or a
playback error may occur.
4
1
focused on
Contents under the folder
5
1
focused on
Button
Description
y Only a USB memory stick can be used to
play back the files distributed and stored
by SuperSign Manager. A USB hard disk or
multi-card reader will not work.
Repeatedly, press the GREEN button to
converted to Movie List->Photo List,
Photo List->Music List, Music List-
>Contents List or Contents List->Movie
List.
Green
Button
Yellow A method to view in 5 large thumbnail
Button or simple list.
y Only an FAT 32 file formatted storage device
can play back the files distributed and stored
by SuperSign manager.
Blue
Convert to Mark Mode.
Button
y A USB 3.0 storage device may not work.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 21
Supported File Formats
Type
Movie
Supported file format
File
Extensions
Item
Profile
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T
RP,TP,ASF,WMV,FLV)
Photo JPEG
supported
file format
SOF0:
baseline
SOF1:
y
y
JPG
PNG
BMP
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*.
mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*.
avi(motion-jpeg)/*.
Extend
Sequential
SOF2:
mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting
file
y
Progressive
Video format : DivX 3.11, DivX4, DivX5. DivX6
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2,
Photo size
Bit rate
Min: 64 x 64
Max Type:
1366 x 768
y
y
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,
JPEG, Sorenson H.263
Music MP3
32 kbps to 320
kbps
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, HE-AAC, ADPCM, WMA
Sampling
rate
32 kHz, 44.1
kHz, 48 kHz
(MPEG1 L3)
Bit rate : within 32 kbps to 320 kbps(MP3)
16 kHz, 22.05
kHz, 24 kHz
(MPEG2 L3)
External Subtitle format : *.smi/*.srt/*.sub
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
8kHz, 11.025
kHz, 12 kHz
(MPEG2.5 L3)
Internal Subtitle format : only, XSUB (It is the
subtitle format used in DivX6 files)
Photo
Music
JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
y
y
You can play JPEG files only.
Non-supported files are displayed in the form
of predefined icon.
MP3
Bit rate 32 to 320
Viewing Movies
y
y
y
Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
Sampling rate MPEG2.5 Layer3 : 8 kHz,
11.025 kHz, 12 kHz
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
Content
(when
using
SuperSign
Manager)
File Extensions : *.cts/ *.cse
Movie
File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*.
trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*.
wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*.
mkv(motion JPEG)
1 Press the navigation buttons to scroll to My
Media and press OK.
2 Press the navigation buttons to scroll to Movie
Video format: MPEG1, MPEG2, MPEG4,H.264/
AVC, DivX 3.11, DivX4, DivX5. DivX6,
Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03,Xwvid
1.10-beta1/2, JPEG, VC1(WVC1/WMV3)
List and press OK.
3 Press the navigation buttons to scroll to a
Audio format: MP2,MP3,Dolby Digital, LPCM,
folder you want and press OK.
AAC, HE-AAC,LPCM, ADPCM, WMA, MP3
4 Press the navigation buttons to scroll to a file
you want and press OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
22 ENTERTAINMENT
Page 1/1
6 Control playback by using the following buttons.
Movie List
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
Move
Play
Page Change
Exit
Mark
01:02:30 / 02:30:25
Hide
Exit
Option
Change Numbers
Mark Mode
To Photo list
Page 1/1
Movie List
Mark Mode
Page 1/1
Drive1
USB1 USB Drive
Button
Description
Stops the playback
Plays a video
001
005
002
006
003
004
051. Apple_ ......
02:30:25
Pauses or resumes the playback
Scans backward in a file
Move
Mark
Page Change
Mark
Scans forward in a file
Mark All
Unmark All
Exit Mark Mode
Exit
Play Marked
Show the Option menu.
Hide the menu on the full-sized screen.
Return to Movie List.
Menu
Description
Play the selected movie file.
Once a movie file finishes playing,
the next selected one will be played
automatically.
Skips to specific points in a file dur-
ing playback. The time of a specific
point will appear on the status bar. In
some files, this function may not work
properly.
Play Marked
or
Mark All
Mark all movie files on the screen.
Deselect all marked movie files.
Press the
ENERGY SAVING button
ENERGY
SAVING
Unmark All
repeatedly to increase the brightness
of your screen.
Exit Mark Mode Exit the Mark Mode.
5 Play a movie.
NOTE
y Non-supported files are displayed the preview
image by icon only
y Abnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 23
Tips for Using Playing Video Files
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
y
y Some user-created subtitles may not work
properly.
y Some special characters are not supported
in subtitles.
y HTML tags are not supported in subtitles.
y Subtitles in languages other than the sup-
ported languages are not available.
y The screen may suffer temporary interrup-
tions (image stoppage, faster playback, etc.)
when the audio language is changed.
y A damaged movie file may not be played
correctly, or some player functions may not
be usable.
Video Options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
y Movie files produced with some encoders
may not be played correctly.
y If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
NOTE
y HD videos with a maximum of
y Option values changed in Movie List does
not affect Photo List and Music List.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
y When replaying the video file after stopping,
you can play from where it stopped previ-
ously.
1920x1080@25/30P or 1280x720@50/60P
are supported, depending on the frame.
y Videos with resolutions higher than
1920X1080@25/30P or 1280x720@50/60P
may not work properly depending on the
frame.
y Movie files other than the specified types and
formats may not work properly.
y Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
y We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
y DTS Audio codec is not supported.
y A movie file more than 30 GB in file size is
not supported for playback.
y A DivX movie file and its subtitle file must be
located in the same folder.
y A video file name and its subtitle file name
must be identical for it to be displayed.
y Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
y Files encoded with GMC (Global Motion
Compensation) may not be played.
Download from Www.Somanuals.com. All Manuals Search And Download.
24 ENTERTAINMENT
When you select the Set Video Play,,
Code Page
Latin1
Support Language
English, Spanish, French,
1 Press the Navigation buttons to scroll to show
the Picture Size, Audio Language, Subtitle
Language, or Repeat.
German, Italian, Swedish, Finnish,
Dutch, Portuguese, Danish, Roma-
nian, Norwegian, Albanian, Gaelic,
Welsh, Irish, Catalan,Valencian
Bosnian, Polish, Croatian, Czech,
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Latin2
Slovak, Slovenian, Serbian,
Hungarian
Latin4
Estonian, Latvian, Lithuanian
Menu
Description
Cyrillic
Bulgarian, Macedonian, Russian,
Ukrainian, Kazakh
Picture Size
Selects your desired picture
format during movie play.
Audio
Changes the Language Group of the
Greek
Greek
Language
audio during movie play. Files
with a single audio track cannot be
selected.
Korean
Korean
Subtitle
Turn on/off the subtitle.
Language
Language
Code Page
Sync
Activated for SMI subtitle and
can select the language within the
subtitle.
NOTE
Can select the font for subtitle.
When set to default, same font as
general menu will be used.
Adjusts the time synchronization of
the subtitle from -10 secs to +10 secs
by steps of 0.5 secs during movie
play.
y Only 10,000 of sync blocks can be support-
ed within the subtitle file.
y When playing a video, you can adjust the
picture size by pressing the ARC button.
y Subtitles in your language are only sup-
ported when the OSD menu is also in this
language.
Position
Changes the position of the
subtitle either up or down during
movie play.
y The code page options may be disabled de-
pending on the language of the subtitle files.
y Select the appropriate code page for the
subtitle files.
Size
Selects your desired Subtitle size
during movie play.
Repeat
Turn on/off repeat function of
movie playback. When turned on, the
file within the folder will be played
back repeatedly. Even when the
repeated playback
is turned off, it can run the playback if
the file name is similar to the previous
file.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 25
Page 1/1
When you select the Set Video,,
Photo List
Page 1/1
USB1 USB Drive
Drive1
1 Press the navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
012
004
013
005
006
015
007
008
009
011
014
Move
View
Page Change
Mark
When you select the Set Audio,,
Change Numbers
Mark Mode
Exit
To Music List
1 Press the navigation buttons to scroll to show
Page 1/1
Photo List
the Sound Mode, Clear Voice II or Balance.
Mark Mode
Page 1/1
009
USB1 USB Drive
Drive1
2 Press the navigation buttons to scroll to make
appropriate adjustments.
001
010
002
003
004
013
005
014
006
015
007
008
011
012
Move
Mark
Page Change
Mark
Mark All
Unmark All
Exit Mark Mode
Exit
View Marked
Viewing Photos
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Menu
Description
View Marked
Mark All
Display the selected photo file.
Mark all photo files on the screen.
Deselect all marked photo files.
1 Press the navigation buttons to scroll to My
Media and press OK.
Unmark All
2 Press the navigation buttons to scroll to Photo
Exit Mark Mode Exit the Mark Mode.
List and press OK.
3 Press the navigation buttons to scroll to a
5 View photos.
folder you want and press OK.
4 Press the navigation buttons to scroll to a file
you want and press OK.
NOTE
y Non-supported files are displayed the pre-
view image by icon only
y Abnormal files are displayed in the form of
bitmap
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
26 ENTERTAINMENT
Using Photo Options
ENERGY
SAVING
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
Use the following options while viewing photos.
y Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
y TransitionEffect: Set the view mode
of the slideshow.
y BGM: Selects a music folder for the
background music.
NOTE
y You cannot change the music
folder while the background
music is playing.
y You can only select the MP3
folder saved on the device that
currently displays the photo.
2/13
Hide
Option
Exit
Slideshow
BGM
Options
Number of selected photos
Hides the option window.
To display the options, press OK.
Return to Photo List.
Option
Description
Slideshow Starts or stops a slideshow with selected
photos.
If there are no selected photos, all pho-
tos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
BGM
Turns the background music on or off.
To set the background music folder,
select Option.
Photo Options
You can adjust Option by MENU button
on the remote control.
1 Press MENU to show the Option menus.
2 Press the Navigation buttons to scroll to Set
Photo View, Set Video. or Set Audio. and
press OK.
Rotates photos clockwise (90°, 180°,
270°, 360°).
NOTE
y The supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Enlarges the image to 200% or 400%.
NOTE
NOTE
y Option values changed in Movie List does
not affect Photo List and Music List.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
y Zoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
y For image of 960×540 pixel
size or larger, only zoom to
400% works properly.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 27
When you select the Set Photo View,
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect, or BGM.
2 Press the Navigation buttons to scroll to make appropriate adjustments.
Transition Effect Option
Option
Sliding
Description
Pushes the current slide out of view as it plays to the next slide.
Stairs
Pushes the current slide in a staircase shape as it plays to the next slide.
Door Open
/Close
Pushes the current slide like opening or closing the door as it plays to the next slide.
Shutter
Fade In
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide.
Fades the slide out slowly before playing to the next slide.
Download from Www.Somanuals.com. All Manuals Search And Download.
28 ENTERTAINMENT
When you select the Set Video,
Listening to Music
1 Press the navigation buttons to scroll to make
appropriate adjustments.
1 Press the navigation buttons to scroll to My Me-
dia and press OK.
2 Press the navigation buttons to scroll to Music
When you select the Set Audio,
List and press OK.
1 Press the navigation buttons to scroll to show
3 Press the navigation buttons to scroll to a folder
the Sound Mode, Clear Voice II or Balance.
you want and press OK.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
4 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Music List
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
B05.mp3
00:00
Move
Play
Page Change
Mark Mode
Mark
Change Numbers
To Movie List
Exit
Page 1/1
Music List
Mark Mode
Page 1/1
USB1 USB Drive
Drive1
001.
-
B01.mp3
B05.mp3
002. -B02.mp3
00:00
003. B03.mp3
00:00
004.
-
B04.mp3
00:00
00:00
005.
-
00:00
Move
Mark All
Mark
Page Change
Mark
Exit
Play Marked
Unmark All
Exit Mark Mode
Menu
Description
Play Marked Display the selected music file.
Mark All
Mark all music files on the screen.
Unmark All Deselect all marked music files.
Exit Mark Mode Exit the Mark Mode.
5 Play music.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 29
Tips for Playing Music Files
6 Control playback by using the following buttons.
This unit doesn't support the ID3 Tag
embedded MP3 files.
y
Page 1/1
Music List
3
file(s) Marked
Drive1
Page 1/1
NOTE
004.
-
B04.mp3
005.
-
B05.mp3
006.
-
B06.mp3
007.
-
B07.mp3
008.
-
B08.mp3
00:00
00:00
00:00
00:00
00:00
005. - B05.mp3
02:30 / 03:25
Hide
Exit
Play with Photo
Option
y Non-supported files are displayed the pre-
view image by icon only
y Abnormal files are displayed in the form of
bitmap
.
Button
Description
.
Stops playback
y A damaged or corrupted music does not play
but displays 00:00 in playtime.
Plays a music file
y A music downloaded from a paid service with
copyright protection does not start but dis-
plays inappropriate information in playtime.
Pauses or resumes playback
Skips to the next file
Skips to the previous file
When playing,
y If you press OK,
buttons, screen saver is
or
stopped.
When you press the
button, the pre-
y The PLAY( ), Pause( ),
,
,
but-
vious music file will be played.
tons on the remote control are also available
in this mode.
When you press the
button, the next
music file will be played.
y You can use the
music and the
ous music.
button to select the next
button to select the previ-
Green
Button
Start playing the selected music files and
then move to the Photo List.
ENERGY
Press the
ENERGY SAVING button
repeatedly to change the brightness of
your screen.
SAVING
file name
Show the Option menu.
Hides the option window.
002. B02.mp3
To display the options, press OK.
When you press the EXIT button while
the Music player is displayed, only the
music will be stopped and the player will
not return to normal viewing.
00:31 / 04:04
Time elapsed /Duration
When you press the EXIT button while
the music is stopped or while the music
player is hidden, the player will return to
normal viewing.
When using the < or > button during
playback a cursor indicating the position
can be played.
or
Download from Www.Somanuals.com. All Manuals Search And Download.
30 ENTERTAINMENT
Music Options
Viewing the Contents List
Plays back the stored files using the Export option
in SuperSign Manager.
1 Press MENU to access the Pop-Up menus.
2 Press the navigation buttons to scroll to Set Au-
1 Press the navigation buttons to scroll to My
Media and press OK.
dio Play. or Set Audio. and press OK.
2 Press the navigation buttons to scroll to Con-
NOTE
tents List and press OK.
y Option values changed in Movie List does
not affect Photo List and Music List.
3 Press the navigation buttons to scroll to a
folder you want and press OK.
y Option value changed in Photo List and Mu-
sic List are changed likewise in Photo List
and Music List excluding Movie List.
4 Press the navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Contents List
Page 1/1
USB1 USB Drive
Drive1
When you select the Set Audio Play.,
test1.cts
test2.cts
07/01/2011
test3.cts
07/01/2011
test4.cts
07/01/2011
07/01/2011
test5.cts
07/01/2011
1 Press the navigation buttons to scroll to select
the Repeat or Random.
Move
Change Numbers
Play
P
Page Change
To Movie List
Exit
2 Press the navigation buttons to scroll to make
appropriate adjustments.
NOTE
When you select the Set Audio,,
y While playing media files from Contents List,
only the BACK, EXIT, or Volume button are
available. Selecting the BACK or EXIT button
stops playing media files and returns to the
screen view mode.
y If there is the AutoPlay folder in the USB
device and its files are in supported formats,
they can be played back automatically when
the USB device is connected to the monitor.
1 Press the navigation buttons to scroll to select
the Sound Mode, Clear Voice II or Balance.
2 Press the navigation buttons to scroll to make
appropriate adjustments.
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 31
DivX® VOD Guide
DivX® VOD Registration
NOTE
In order to play purchased or rented DivX® VOD
contents, you should register your device with 10
digit DivX registration code from your device at
y While you are checking the registration code,
some buttons may not work.
y If you use the DivX registration code of
another device, you cannot play the rented
or purchased DivX file. Make sure to use
the DivX registration code assigned to your
product.
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to MY ME-
DIA and press OK.
y The video or audio files that are not con-
verted by the standard DivX codec may be
corrupted or not be played.
3 Press the Blue button.
4 Press the navigation buttons to scroll to DivX
Reg. Code and press OK.
y The DivX VOD code allows you to activate
up to 6 devices under one account.
5 View the registration code of your display.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
You must register your device
to play DivX protected videos.
Registration code : **********
Close
Download from Www.Somanuals.com. All Manuals Search And Download.
32 ENTERTAINMENT
DivX® VOD Deregistration
Using PIP/PBP
You should deregister your device with 8 digit DivX
com/vod.
Videos or pictures stored on the USB device can
be displayed on a single monitor by dividing them
into the main and subscreens.
1 Press MENU to access the main menus.
2 Press the navigation buttons to scroll to MY ME-
DIA and press OK.
1 Press the MENU button to move to OPTION
3 Press the Blue button.
and press OK.
4 Press the navigation buttons to scroll to Deacti-
2 Press PIP/PBP to select PIP or PBP and then
vation and press OK.
press OK.
5 Press the navigation buttons to select Yes to
confirm.
PIP/PBP
Prev.
Move
Mode
Position
Size
Off
PIP
PBP
Deregistration code :
********
Continue with registration?
Yes
No
6 When you are finished, press EXIT.
3 Select Movie List or Photo List from My
When you return to the previous menu, press
Media.
BACK.
Contents List
Movie List
Photo List
Music List
NOTE
Once the deregistration is executed, you
must register your device again to see
DivX® VOD contents.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
ENTERTAINMENT 33
4 Select a file you want and then press OK.
6 For sound select either Main or Sub. You must
to select the output sound before running the
PIP or PBP function.
Page 1/1
Movie List
Page 1/1
Drive1
USB1 USB Drive
001
005
002
006
003
004
051. Apple_ ...
02:30:25
Select the sound path.
Main
Sub
Move
Play
Page Change
Exit
Mark
Change Numbers
Mark Mode
To Photo list
7 The sub screen is displayed on the main screen.
5 Select the PIP or PBP icon from the play list.
01:02:30 / 02:30:25
Hide
Exit
Option
< MOVIE LIST >
2/13
Hide
Option
Exit
Slideshow
BGM
< PHOTO LIST >
Download from Www.Somanuals.com. All Manuals Search And Download.
34 CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
Accessing Main Menus
ARC
UTE
Press MENU to access the main menus.
1
2
AUTO
OK
MENU
S.MENU
Press the navigation buttons to scroll to one of the following menus and
press OK.
BACK
ID
TILE
EXIT
ON
OFF
Press the navigation buttons to scroll to the setting or option you want
and press OK.
3
4
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE
AUDIO
Adjusts the image size,
quality, or effect.
Adjusts the sound quality,
effect, or volume level.
TIME
Sets the time, date, or
timer feature.
PICTURE
AUDIO
TIME
MY MEDIA
Display and play movie,
photo and music content
stored on your USB
OPTION
Customizes the general
settings.
OPTION
NETWORK
MY MEDIA
NETWORK
Sets up the network
setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 35
PICTURE Settings
Move
OK
PICTURE
Aspect Ratio
: 16:9
: Off
Press MENU to access the main menus.
1
2
Energy Saving
Smart Energy Saving : Off
Press the Navigation buttons to scroll to PICTURE and
press OK.
BLU Maintenance
Picture Mode
: Off
: Standard
Backlight
Contrast
50
50
Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3
4
Brightness 50
- To return to the previous level, press BACK.
Color
50
0
R
G
C
Tint
When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
W
Color Temp.
0
Advanced Control
Picture Reset
Screen
The available picture settings are described in the following:
Setting
Description
Changes the image size to view images at its optimal size.
Aspect Ratio
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving
Level
Auto
Off
Adjust automatically
Disables Energy Saving function
Selects the brightness level of the backlight.
Minimum/
Medium/
Maximum
Screen off
The screen turns off in 3 seconds.
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.
Saving
Level
Off
On
Disables the Smart Energy Saving function.
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
BLU
Maintenance
Enables or disables the luminance maintenance function.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best monitor screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the monitor .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, color, and sharpness.
Standard
Cinema
Adjusts the image for the normal environment.
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Game
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Optimizes the video image for a fast gaming screen such as PCs or games.
Download from Www.Somanuals.com. All Manuals Search And Download.
36 CUSTOMIZING SETTINGS
Setting
Description
SCREEN
(In RGB
Mode Only)
Customizes the PC display options in RGB mode.
Option
Resolution
Auto Config.
Selects a proper resolution. See “Customizing PC display options”.
Adjusts the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky. Run Auto Config. before adjusting these.
Reset
Restores all options to the default setting.
Picture Mode Options
Setting
Description
Backlight
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use contrast when the bright
part of the picture is saturated.
Brightness
Sharpness
Adjusts the base level of the signal in the picture. You may use brightness when the dark part
of the picture is saturated.
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Advanced Control
Picture Reset
Set to warm to enhance hotter colors such as red, or set to cool to make picture bluish.
Customizes the advanced options. Refer to the advanced image options.
Restores the options to the default setting.
NOTE
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
still image.
If Energy Saving is set to minimum, medium, or maximum, the Smart Energy Saving function is
disabled.
y
y
If the Smart Energy Saving function is enabled, the BLU Maintenance function may not work properly.
If the Smart Energy Saving function is enabled, the image on the screen may look darker.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 37
Advanced Control
Setting
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen.
Dynamic Contrast
(Off/High/Medium/Low) The picture is improved by making bright parts brighter and dark parts darker. (Function
works in the following mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Dynamic Color
(Off/High/Low)
Adjusts screen colors so that they look livelier, richer and clearer. This feature enhances
hue, saturation and luminance so that red, blue, green and white look more vivid. (Function
works in the following mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Clear White
Make the white area of screen brighter and more white.
(Off/High/Low)
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise Reduction
(Off/High/Medium/Low)
Reduces screen noise without compromising video quality. (Function works in the following
mode - AV (CVBS), Component, HDMI-DTV, Display Port-DTV)
Digital Noise Reduction This option reduces the noise produced while creating digital video signals.
(Off/High/Medium/Low)
Gamma
(High/Medium/Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and
low gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - AV (CVBS), Component, HDMI-DTV, Display Port-
DTV)
Download from Www.Somanuals.com. All Manuals Search And Download.
38 CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
Move
OK
Clear Voice II
: Off
Press MENU to access the main menus.
1
2
L
R
Balance
0
Sound Mode
: Standard
Press the navigation buttons to scroll to AUDIO and press
OK.
Infinite Sound : Off
Treble 50
Bass 50
Reset
Press the navigation buttons to scroll to the setting or
option you want and press OK.
3
4
Digital Audio Input
Speaker
: Audio In
: On
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users makes dialog easier to
understand.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
Mode
Standard
Music
Select when you want standard-quality sound.
Select when you listen to music.
Select when you watch movies.
Cinema
Sport
Select when you watch sport events.
Select when you play games.
Game
Digital Audio
Input
HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
*The monitor speaker is sold separately.
ON: Enables sound to the monitor speaker.
OFF: Disables sound to the monitor speaker. Use this option when using an external sound
device.
Sound Mode Options
Setting
Infinite Sound
Treble
Description
LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers.
Controls the dominant sounds in the output. When you turn up the treble, it will increase the
output to the higher frequency range.
Bass
Controls the softer sounds in the output. When you turn up the bass, it will increase the output
to the lower frequency range.
Reset
Resets the sound mode to the default setting.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 39
TIME Settings
TIME
Move
OK
Clock
Press MENU to access the main menus.
1
2
3
Off Time
: Off
On Time
: Off
Press the navigation buttons to scroll to TIME and press OK.
Sleep Timer
Power On Delay
Auto Off
: Off
Press the navigation buttons to scroll to the setting or option
you want and press OK.
: Off
: 15 min.
: 4hours
Automatic Standby
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
4
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
Off/On Time
Sleep Timer
Sets the time to turn on or off the monitor.
Sets the length of time until the monitor to turns off. When you turn the monitor off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
Auto off
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in off mode automatically.
NOTE
Off/On Time can be saved for up to seven schedules; the monitor is turned on or off at the preset time
in the schedule list. If multiple preset times are stored in the schedule list, this function works at the
nearest time from the current time.
y
The scheduled power-off function works properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over
the power-on time if the set is turned on, and vice versa if the set is turned off.
The Automatic Standby and Auto off functions may not be available in some countries.
y
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
40 CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
OK
Language
Press MENU to access the main menus.
1
2
Power Indicator
ISM Method
DPM Select
Fail Over
: Normal
: Off
Press the navigation buttons to scroll to OPTION and press
OK.
: On
Factory Reset
Set ID
Press the navigation buttons to scroll to the setting or option
you want and press OK.
3
4
: 1
Tile Mode
PIP/PBP
- To return to the previous level, press BACK.
USB Content Recovery : Off
Product/Service Info.
Portrait Mode
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Language
Description
To choose the language in which the control names are displayed.
Use this function to set the power indicator on the front side of the product to on or off.
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
Power Indicator
ISM Method
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Orbiter
Leave on normal if you don't foresee image burn in being a problem.
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
Fail Over
A user can choose to turn the power saving mode on / off.
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
Factory Reset
Set ID
Select this option to return to the default factory settings.
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 41
Setting
Tile Mode
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
Auto Config.
Adjusts the screen position automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
PC Position
PC Size
Moving the screen position horizontally and vertically.
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
Reset
The image is omitted by the distance between the screens to be naturally
shown.
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
NOTE
If Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.
y
PIP/PBP
Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode
Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position
Size
Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x270; the maximum size (Size: 10) is 960x540.
NOTE
The position and size options are enabled only in PIP mode.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
42 CUSTOMIZING SETTINGS
Setting
Description
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a content.
(This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address and home
page.
Portrait Mode
Rotate OSD clockwise (90°,270°)
Option
90°
Rotate OSD clockwise 90°.
Rotate OSD clockwise 270°.
270°
90°
270°
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 43
Tile Mode
Tile Mode - Natural Mode
This monitor can be tiled with additional monitors
to create a large tiled display.
When active, the part of the image that would
normally be displayed in the gap between the
monitors is omitted.
1X2
Off
When using 2 monitors
When the Tile Mode
option is disabled
Before
ID 2
ID 1
Tile ID
3X3
2X2
When using 9 monitors
When using 4 monitors
ID 3
ID 6
ID 2
ID 4
ID 2
ID 5
ID 1
ID 3
ID 1
ID 4
After
ID 9
ID 8
ID 7
4X4
When using 16 monitors
ID 1
ID 5
ID 3
ID 7
ID 4
ID 8
ID 2
ID 6
ID 11
ID 15
ID 12
ID 16
ID 10
ID 14
ID 9
ID 13
5X5
When using 25 monitors
ID 3
ID 4
ID 5
ID 2
ID 1
ID 8
ID 9
ID 10
ID 15
ID 7
ID 6
ID 13
ID 18
ID 23
ID 14
ID 19
ID 24
ID 12
ID 11
ID 16
ID 21
ID 20
ID 25
ID 17
ID 22
Download from Www.Somanuals.com. All Manuals Search And Download.
44 CUSTOMIZING SETTINGS
PIP/PBP
NOTE
Displays videos or photos stored in the USB device
on a single monitor by dividing it into the main and
sub screens.
The subscreen is only supported when using the
USB device.
y
Sub
USB
Mode
Component
O
O
O
X
*PIP (Picture In Picture): Displays the Sub screen
in the main screen.
*PBP (Picture By Picture): Displays the Sub
screen next to the main screen.
RGB
Main
HDMI/DVI-D/Display Port
AV
You can only change the size and position in PIP
mode.
y
y
y
y
Sub
screen
Main
screen
With PBP selected, theAspect Ratio option in the
PICTURE menu is disabled (Fixed as 16:9).
While running the PBP function, the Tile Mode function
does not work.
PIP
PBP
You must select the output sound before running
the PIP or PBP functions. (Select either Main or
Sub.)
Position
If you fail to select Main or Sub from the sound
selection box, and if the OSD disappears after
either a period of time or when the Exit or Back
key is pressed, the PIP/PBP subscreen is not
activated.
y
Adjusts the position of the subscreen (top left,
bottom left, top right, bottom right)
You cannot change the sound while running the
PIP or PBP functions. If you want to change the
sound, please restart PIP/PBP.
y
y
y
The picture quality of the subscreen is set
according to the values selected in the main menu,
not the USB device.
top left
top right
Even when the power is turned off or on, if the
USB device is connected, the PIP/PBP mode plays
again from where it left off.
If you play videos you selected in PIP/PBP mode,
the videos will play back repeatedly in succession.
The buttons below work in PIP mode.
y
y
bottom left
Size
bottom right
Button
Photo
Movie
Adjusts the size of the subscreen (Size 0-10).
PBP
960x1080
10 : 960x540
PIP
0 :
480x270
1920x1080
Download from Www.Somanuals.com. All Manuals Search And Download.
CUSTOMIZING SETTINGS 45
NETWORK Settings
NETWORK
Move
OK
Player Name Setting
Press MENU to access the main menus.
1
2
Network Setting
Network Status
Server IP Setting
Server IP Status
: Wired
: Not connected
Press the navigation buttons to scroll to NETWORK and
press OK.
: Not connected
Press the navigation buttons to scroll to the setting or option
you want and press OK.
3
4
- To return to the previous level, press BACK.
When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Sets the player name used in SuperSign Manager. (Up to 20 characters)
Configure the network settings.
Network Setting
Network Status
Display the network status.
- Internet is connected: Externally connected
- Home network is connected: Only internally connected
- Not connected: When there is no network connection
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected: When there is no network connection with SuperSign server
- Waiting for approval: When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected: When network connection with SuperSign server has been made, but access to server
has been rejected by the server
- Internet is connected: When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
continuously.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
46 MAKING CONNECTIONS
MAKING CONNECTIONS
Connect various external devices to the ports on the monitor’s back panel.
Find an external device you want to connect to your monitor shown on the following illustration.
Check the connection type of the external device.
1
2
3
Go to the appropriate illustration and check the connection details.
HD Receiver
DVD
VCR
HDMI
Component
AV
HDMI
Component
AV
AV
Component
Speaker
USB
Memory Storage
PC
Gaming device
Camcorder/Camera
RGB
DVI-D
HDMI
HDMI
Component
AV
HDMI
Component
AV
Display Port
LAN
NOTE
If you connect a gaming device to the monitor, use the cable supplied with the gaming device.
y
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 47
Component Connection
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Connect a HD receiver, DVD, or VCR player to the
Monitor and select an appropriate input mode.
HDMI Connection
Transmits the digital video and audio signals from
an external device to the monitor. Connect the
external device and the monitor with the HDMI
cable as shown on the following illustration.
Back of the Product
RGB/AV
AUDIO IN
/COMPONENT IN
Back of the Product
(not included)
(not included)
(not included)
PC
NOTE
Use a High Speed HDMI™ Cable.
High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
48 MAKING CONNECTIONS
AV (CVBS) Connection
Connecting to a USB
Transmits the analog video and audio signals
from an external device to the monitor. Connect
the external device and the monitor with the 15
pin signal to RCA cable as shown on the following
illustration.
Connect a USB storage device such as a USB
flash memory, external hard drive, MP3 player,
or a USB memory card reader to the monitor and
access the USB menu to use various multimedia
files.
Back of the Product
RGB/AV
AUDIO IN
/COMPONENT IN
or
(not included)
(not included)
AV (CVBS)
PC
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING CONNECTIONS 49
Connecting to the LAN
NOTE
Using LAN establishes communication
between your PC and the monitor and
enables to use the OSD menus on the PC
as well as on the monitor.
y
LAN Connection
Connect PC to monitor directly.
LAN
A
B
C
Monitor
PC
Using a router (Switch)
LAN
Switch
Monitor
PC
Using the Internet.
LAN
Network
PC
Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
50 MAKING CONNECTIONS
Daisy Chain Monitors
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub
Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector
of other products
Monitor 1
Monitor 2
Monitor 3
Monitor 4
15-pin D-Sub Signal Cable
(Max 3m)
RGB OUT (PC)
RGB
Mode
Component
Mode
AV(CVBS)
Mode
NOTE
The number of monitors that can be connected to one output may vary depending on signal status
and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to
9 monitors. If you want to connect more than this number of monitors, it is recommended to use a
distributor.
y
y
When multi-connecting in/out cascade format, no loss cables are recommended.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 51
TROUBLESHOOTING
No image is displayed
Problem
Resolution
Is the product power cord
connected?
See if the power cord is properly connected to the outlet.
y
Is the power indicator light on?
See if the power switch is turned on.
May need service.
y
y
Power is on, power indicator
is red but the screen appears
extremely dark.
Adjust brightness and contrast again.
Backlight may need repair.
y
y
The power indicator amber?
If the product is in power saving mode, move the mouse or press any
y
key.
Turn both devices off and then back on.
y
y
Does the 'Out of range'
message appear?
The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB, HDMI, DVI-D, Display Port: 1920 x 1080 @ 60 Hz
Does the 'Check signal cable'
message appear?
The signal cable between PC and product is not connected. Check
the signal cable.
y
Press the INPUT menu in the remote Control to check the input signal.
There may be a poor signal transmission occurring intermittently
between the external device and LG monitor set. Disconnect the
signal cable and then reconnect it. Turn the external device or the LG
monitor set off and then on again.
y
y
'Unknown Product' message appears when the product is connected.
Problem
Resolution
Did you install the driver?
Install the product driver, which is provided with the product, or
download it from the web site. (http://www.lg.com)
See if the plug&play function is supported by referring to the video
card user manual.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
52 TROUBLESHOOTING
The screen image looks abnormal.
Problem
Resolution
Is the screen position wrong?
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select the optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Position OSD menu.
See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel Display Setting menu.
y
y
Do thin lines appear on the
background screen?
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Clock OSD menu.
y
y
Horizontal noise appears or the
characters look blurred.
D-Sub analog signal - Press the AUTO button in the remote control to
automatically select an optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the Phase OSD menu.
The screen is displayed
abnormally.
The proper input signal is not connected to the signal port. Connect
the signal cable that matches with the source input signal.
There may be a poor signal transmission occurring intermittently
between the external device and LG monitor set. Disconnect the
signal cable and then reconnect it. Turn the external device or the LG
monitor set off and then on again.
y
y
When setting the resolution
for external devices, some
resolution values are not shown
correctly in the resolution
settings screen.
Restart the external devices while the LG monitor is powered on.
After restarting the external devices, check if the resolution values are
displayed correctly.
y
After-image appears on the product.
Problem
Resolution
After-image appears when the
product is turned off.
If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
y
The audio function does not work.
Problem
Resolution
No sound?
See if the audio cable is connected properly.
Adjust the volume.
See if the sound is set properly.
y
y
y
Sound is too dull.
Sound is too low.
Adjust the Clear Voice ll, Treble and Bass appropriately.
Adjust the volume.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING 53
Screen color is abnormal.
Problem
Resolution
Screen has poor color resolution
(16 colors).
Set the number of colors to more than 24 bits (true color) Select
Control Panel - Display - Settings - Color Table menu in Windows.
y
y
y
Screen color is unstable or
mono-colored.
Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
Resolution
The power suddenly turned off.
Is the sleep timer set?
Check the power control settings. Power interrupted
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
54 SPECIFICATIONS
SPECIFICATIONS
LCD Panel
Screen Type
1830.616 mm Wide (72.07 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 1830.616 mm
Pixel Pitch
0.831 mm (H) x 0.831 mm (V)
Video Signal
Max. Resolution
RGB : 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB: 1920 X 1080 @60 Hz
HDMI,DVI-D, Display Port: 1920 X 1080 @60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
Vertical Frequency
Synchronization Type
RGB: 30 kHz to 83 kHz
HDMI,DVI-D, Display Port: 30 kHz to 83 kHz
RGB: 56 Hz to 75 Hz
HDMI,DVI-D, Display Port: 56 Hz to 60 Hz
Separate Sync, Composite Sync, Digital
Input Connector
Power
15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN,
USB, Audio
Rated Voltage
100-240 V~ 50/60 Hz 12.0 A
Power Consumption
On Mode: 1000 W Typ. 1300 W Max
Sleep Mode (RGB): 1 W
Sleep Mode (HDMI, DVI-D, Display Port)
: 2 W (Set Only / With External Device)
Off Mode: 1 W
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 50 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS 55
Dimensions
(Width x Height x
Depth) / Weight
1654.5 mm x 956.5 mm x 139.5 mm / 54.5 kg
* Applicable only for models that support the speakers
Audio
RMS Audio Output
Input Sensitivity
10 W + 10 W (R + L)
0.7 Vrms
Speaker Impedance
8 Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
Download from Www.Somanuals.com. All Manuals Search And Download.
56 SPECIFICATIONS
DTV Mode
Resolution
RGB (PC) supported mode
HDMI,Display
Port (DTV)
Horizontal
Resolution
Vertical
Component
Frequency(kHz) Frequency(Hz)
480i
o
o
o
o
o
o
o
x
o
x
o
o
o
o
31.469
31.468
31.469
37.5
70.8
70.8
59.94
75
640 x 350
480p
576i
720 x 400
640 x 480
576p
720p
1080i
1080p
640 x 480
37.879
46.875
49.725
48.363
60.123
44.772
47.7
60.317
75
800 x 600
800 x 600
74.55
60
832 x 624
1024 x 768
1024 x 768
1280 x 720
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
75.029
59.855
60
Power Indicator
Mode
Product
63.981
79.98
60.02
75.02
59.954
60
On Mode
Sleep Mode
Off Mode
Red
Amber
-
65.290
67.5
NOTE
When the cable is connected to the HDMI or
the display port, you can select the PC/DTV
mode optionally. It is recommended you to
set to the PC mode when connecting to PC;
the DTV mode when connecting to DTV.
y
HDMI,DVI-D,Display Port (PC) supported mode
Horizontal
Frequency(kHz) Frequency(Hz)
Vertical
Resolution
NOTE
31.469
37.879
48.363
44.772
47.7
59.94
60.317
60
640 x 480
800 x 600
Vertical frequency: To enable the user to
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
y
y
1024 x 768
1280 x 720
1366 x 768
1280 x 1024
1680 x 1050
1920 x 1080
59.855
60
63.981
65.290
67.5
60.02
59.954
60
Download from Www.Somanuals.com. All Manuals Search And Download.
IR CODES 57
IR CODES
Code (Hexa)
Function
Note
95
08
0B
C4
R/C BUTTON
R/C BUTTON
R/C BUTTON
ON/OFF
R/C BUTTON
(Discrete IR Code)
C5
R/C BUTTON
(Discrete IR Code)
43
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
40
Up
41
Down
Left
07
06
Right
44
28
5B
4D
02
Volume
Volume
03
09
E0
E1
10 to 19
72
(
(
UP)
Down) R/C BUTTON
R/C BUTTON
Number Key to
Red Key
R/C BUTTON
71
Green Key
Yellow Key
Blue Key
R/C BUTTON
63
R/C BUTTON
61
R/C BUTTON
7B
76
R/C BUTTON
(4:3)
Discrete IR Code
Discrete IR Code
Discrete IR Code
77
(16:9)
(ZOOM)
AF
79
R/C BUTTON
(Discrete IR Code)
99
Auto Config.
R/C BUTTON
(Discrete IR Code)
B1
B0
BA
8F
8E
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
R/C BUTTON
Download from Www.Somanuals.com. All Manuals Search And Download.
58 CONTROLLING THE MULTIPLE PRODUCT
CONTROLLING THE MULTIPLE PRODUCT
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
y
y
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
product on/off, select an input source or adjust the OSD menu from your PC.
y
Monitor 1
Monitor 2
Monitor 3
Monitor 4
PC
RS-232C Cable (not included)
RS-232C Configurations
7-Wire Configurations (Standard RS-232C cable)
3-Wire Configurations (Not Standard)
PC
Set
PC
Set
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
Baud Rate: 9600 BPS
Data Length: 8 bit
Parity Bit: None
Stop Bit: 1bit
Flow Control: None
y
y
y
y
y
y
y
Communication Code: ASCII code
Use a crossed (reverse) cable
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 59
Command Reference List
COMMAND
DATA
(Hexadecimal)
1
k
x
k
j
2
01. Power
a
00 to 01
02. Input Select
b
c
q
x
g
h
k
i
Refer to ‘Input Select.’
Refer to ‘Aspect Ratio.’
Refer to ‘Energy Saving.’
Refer to ‘Picture mode.’
00 to 64
03. Aspect Ratio
04. Energy Saving
05. Picture mode
06. Contrast
d
k
k
k
k
k
x
f
07. Brightness
00 to 64
08. Sharpness
00 to 64
09. Color
00 to 64
10. Tint
j
00 to 64
11. Color Temperature
12. H Position
u
q
r
00 to 64
00 to 64
13. V Position
f
00 to 64
14. H Size
f
s
u
t
00 to 64
15. Auto configuration
16. Balance
j
01
k
d
k
k
d
k
k
f
00 to 64
17. Sound mode
y
r
Refer to ‘Sound mode.’
00 to 64
18. Treble
19. Bass
s
v
e
f
00 to 64
20. Speaker
00 to 01
21. Volume Mute
22. Volume Control
23. Time 1 (Years/ Months/ Days)
24. Time 2 (Hours/ Minutes/Seconds)
25. Off Timer (Repeat mode/ Time)
26. On Timer (Repeat Mode/ Time)
27. On Timer Input
28. Sleep Time
00 to 01
00 to 64
a
x
e
d
u
f
Refer to ‘Time 1.’
Refer to ‘Time 2.’
Refer to ‘Off Timer.’
Refer to ‘On Timer.’
Refer to ‘On Timer Input.’
00 to 08
f
f
f
f
f
29. Power On Delay
30. Automatic Standby
31. Auto Off
f
h
n
g
i
00 to 64
m
f
00 to 01
00 to 01
32. Language
f
Refer to ‘Language.’
00 to 01
33. Power Indicator (Standby Light)
34. Power Indicator (Power Light)
35. ISM mode
f
o
p
p
i
f
00 to 01
j
Refer to ‘ISM Method.’
00H to 02H
36. Fail Over Select
37. Fail Over Input Select
38. Reset
m
m
f
j
Refer to ‘Fail Over Input Select.’
00 to 02
K
Download from Www.Somanuals.com. All Manuals Search And Download.
60 CONTROLLING THE MULTIPLE PRODUCT
COMMAND
DATA
(Hexadecimal)
1
d
d
d
d
d
d
d
d
f
2
39. Tile Mode
d
00 to 01
FF
40. Tile Mode Check
41. Tile ID
z
i
Refer to ‘Tile ID.’
00 to 32
00 to 32
00 to 32
00 to 32
00 to 01
00 to 01
00 to 03
FF
42. Tile H Position
43. Tile V Position
44. Tile H Size
e
f
g
h
j
45. Tile V Size
46. Natural Mode (In Tile mode)
47. DPM Select
j
48. FAN Control
d
d
d
k
m
k
d
f
o
w
n
m
c
l
49. FAN Fault Check
50. Temperature Value
51. Remote Lock/ key Lock
52. Key
FF
00 to 01
Refer to ‘Key.’
00 to 01
FF
53. OSD Select
54. Elapsed time return
55. Serial No. Check
56. S/W Version
l
y
z
m
n
o
g
t
FF
f
FF
57. White Balance Red Gain
58. White Balance Green Gain
59. White Balance Blue Gain
60. Backlight
j
00 to FE
00 to FE
00 to FE
00 to 64
00 to 01
00 to 01
j
j
m
d
d
m
s
m
t
61. PC Power Control
62. PC Power
s
u
v
t
63. Reading luminance values
64. Status check
Refer to 'Reading luminance values'
Refer to 'Status check'
00 to 01
65. BLU Maintenance
66. Mirror mode
00 to 02
a
Note : During USB operations such as Dvix or EMF, all commands except Power(k a) and Key(m c)
are not executed and treated as NG.
Some commands are not supported depending on the model.
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 61
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x]
* When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is
in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the
data that is sent from the PC.
* If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any
acknowledgement (ACK).
* If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be
checked (only for some functions).
* Some commands are not supported depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
62 CONTROLLING THE MULTIPLE PRODUCT
01. Power (Command: k a)
04. Energy Saving (Command: j q)
To control the Power On/Off the display.
To set the Energy Saving function.
Transmission
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
[j][q][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01 : On
Data 00: Off
01: Minimum
02: Medium
03. Maximum
04: Auto
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* Only when the monitor set is fully powered on, the
Acknowledgement signal is returned properly.
* There may be a certain time of delay between the
Transmission and Acknowledgement signals.
05. Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02. Input Select (Command: x b)
To select the Input Source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data 20: Input (AV)
40: Component
05. Picture Mode (Command: d x)
60: RGB
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(HDMI1)(DTV)
A0: HDMI(HDMI1)(PC)
C0: Display Port(DTV)
D0: Display Port(PC)
91: HDMI2/SDI(DTV)
A1: HDMI2/SDI(PC)
B0: SuperSign
To select the Picture Mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data 00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
[b][ ][Set ID][ ][OK/NG][Data][x]
* Some input signals may not be supported
depending on the model.
03. Aspect Ratio (Command: k c)
To adjust the screen format.
06. Contrast (Command: k g)
Transmission
To adjust the screen contrast.
[k][c][ ][Set ID][ ][Data][Cr]
Transmission
Data 01: 4:3
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
02: 16:9
04: Zoom
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
09: Just scan (720p or more)
[g][ ][Set ID][ ][OK/NG][Data][x]
(Component, HDMI/ DVI-D/ Display Port DTV)
* RGB, DVI-D, HDMI/Display Port PC mode (1:1)
10 to 1F: Cinema Zoom 1 to 16
(AV, Component, HDMI/ DVI-D/ Display Port DTV)
* Available data types differ depending on the input
signal. For more information, see the aspect ratio
section of the owner's manual.
* The aspect ratio may differ depending on the
model's input configuration.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 63
07. Brightness (Command: k h)
10. Tint (Command: k j)
To adjust the screen tint.
* This function is available only in AV/Component
input.
To adjust the screen brightness.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Brightness 0 to 100
Acknowledgement
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Tint R50 to G50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
[j][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust the screen sharpness.
* This function is available only in AV/Component
input.
11. Color Temperature (Command: x u)
To adjust the screen Color Temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust the screen color.
* This function is available only in AV/Component
input.
12. H Position (Command: f q)
To adjust the screen Horizontal Position.
* This function is available only when the Tile Mode is
set to Off.
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Left) to max. 50 (Right)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[q][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
64 CONTROLLING THE MULTIPLE PRODUCT
13. V Position (Command: f r)
To adjust the screen Vertical Position.
* This function is available only when the Tile Mode is
set to Off.
16. Balance (Command: k t)
To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
* The operational range varies depending on the
RGB input resolution.
(Only available for RGB-PC input.)
[t][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. -50 (Bottom) to max. 50 (Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
14. H Size (Command: f s)
To select the Sound Mode.
To adjust the screen Horizontal Size.
* This function is available only when the Tile Mode is
set to Off.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
* The operational range varies depending on the
RGB input resolution.
Data 01: Standard
02: Music
(Only available for RGB-PC input.)
03: Cinema
04: Sport
Transmission
05. Game
[f][s][ ][Set ID][ ][Data][Cr]
Acknowledgement
Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand)
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
[s][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
15. Auto Configuration (Command: j u)
To adjust the picture position and minimize image
shaking automatically.
To adjust the Treble values.
Transmission
(Only available for RGB-PC input.)
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
[r][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 65
19. Bass (Command: k s)
22. Volume Control (Command: k f)
To adjust the Bass values.
To set the playback volume.
Transmission
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Bass 0 to 100
Acknowledgement
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
[f][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
23. Time 1(Year/ Month/ Day) (Command: f a)
To select the speaker on/off.
To set the Time 1(Year/ Month/ Day) values.
Transmission
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00: Off
01: On
Data 1 00 to 14: 2010 to 2030
Data 2 01 to 0C: January to December
Data 3 01 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1(Year/
Month/ Day) values.
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
21. Volume Mute (Command: k e)
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To control the Volume Mute on/off.
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data 00 : Mute (Volume Off)
Data1 00 to 17: 00 to 23 hours
01 : Current volume (Volume On)
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2(Hour/
Minute/ Second) values.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
** This command won’t work if Time 1(Year/ Month/
Day) has not been set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
66 CONTROLLING THE MULTIPLE PRODUCT
25. Off Timer(Repeat Mode/ Time) (Command: f e)
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the Off Timer(Repeat Mode/ Time) function.
To set the On Timer(Repeat mode/ Time) function.
Transmission
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1
Data1
1. f1h to f7h (Read data)
F1: Read the 1st Off Time data
F2: Read the 2nd Off Time data
F3: Read the 3rd Off Time data
F4: Read the 4th Off Time data
F5: Read the 5th Off Time data
F6: Read the 6th Off Time data
F7: Read the 7th Off Time data
2. e1h-e7h (Delete one index), e0h (Delete all
indexes)
1. f1h to f7h (Read data)
F1: Read the 1st On Time data
F2: Read the 2nd On Time data
F3: Read the 3rd On Time data
F4: Read the 4th On Time data
F5: Read the 5th On Time data
F6: Read the 6th On Time data
F7: Read the 7th On Time data
2. e1h-e7h (Delete one index), e0h (Delete all
indexes)
E0: Delete all Off Time data
E1: Delete the 1st Off Time data
E2: Delete the 2nd Off Time data
E3: Delete the 3rd Off Time data
E4: Delete the 4th Off Time data
E5: Delete the 5th Off Time data
E6: Delete the 6th Off Time data
E7: Delete the 7th Off Time data
3. 01h to 06h (Set the day of week for Off Time)
00: Off
E0: Delete all On Time data
E1: Delete the 1st On Time data
E2: Delete the 2nd On Time data
E3: Delete the 3rd On Time data
E4: Delete the 4th On Time data
E5: Delete the 5th On Time data
E6: Delete the 6th On Time data
E7: Delete the 7th On Time data
3. 01h to 06h (Set the day of week for On Time)
00: Off
01: Once
01: Once
02. Daily
02. Daily
03: Monday to Friday
03: Monday to Friday
04: Monday to Saturday
04: Monday to Saturday
05: Saturday to Sunday
05: Saturday to Sunday
06. Sunday
06. Sunday
07. Monday
07. Monday
08. Tuesday
08. Tuesday
09. Wednesday
09. Wednesday
0A. Thursday
0A. Thursday
0B. Friday
0B. Friday
0C. Saturday
0C. Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* To read or delete the Off Time list, set FFH for
[Data2] and [Data3].
(Example 1: fe 01 f1 ff ff - Read the 1st Off Time
data.)
(Example 1: fd 01 f1 ff ff - Read the 1st On Time
data.)
(Example 2: fe 01 e1 ff ff - Delete the 1st Off Time
data.)
(Example 2: fd 01 e1 ff ff - Delete the 1st On Time
data.)
(Example 3: fe 01 04 02 03 - Set the Off Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
(Example 3: fd 01 04 02 03 - Set the On Time to
"Monday to Saturday, 02:03".)
* This function is supported only when 1 (Year/Month/
Day) and 2 (Hour/Minute/Second) are set.
Acknowledgement
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 67
27. On Timer Input (Command: f u)
To select an external input for the current On Time
setting and add a new schedule or change the
existing schedule.
28. Sleep Time (Command: f f)
To set the Sleep Time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Off (Sleep Timer off)
01: 10 min.
[f][u][ ][Set ID][ ][Data1][Cr]
[f][u][ ][Set ID][ ][Data1][Data2][Cr]
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Data (Add schedule)
20: Input (AV)
40: Component
60. RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
Acknowledgement
91: HDMI2/SDI
B0:SuperSign
[f][ ][Set ID][ ][OK/NG][Data][x]
Data1 (Change schedule)
1. f1h to f4h (Read data)
F1: Select the 1st schedule input
F2: Select the 2nd schedule input
F3: Select the 3rd schedule input
F4: Select the 4th schedule input
F5: Select the 5th schedule input
F6: Select the 6th schedule input
F7: Select the 7th schedule input
Data2
20: Input (AV)
40: Component
60: RGB
70: DVI-D
90: HDMI (HDMI1)
C0: Display Port
91: HDMI2/SDI
B0:SuperSign
* To read the schedule input, enter FFH for [Data2].
If no schedule is available for [Data1] when
attempting to read or change the schedule data, the
text NG will be displayed and the operation fails.
(Example 1: fu 01 60 - Move each schedule input
down one row and save the 1st schedule input in
RGB mode.)
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on. (Unit: Second)
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to 64: min. 0 to max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
(Example 2: fu 01 f1 ff - Read the 1st schedule
input.)
(Example 3: fu 01 f3 20 - Change the 3rd data
schedule input to the current On Time and AV input.
If there is no third schedule, the text NG will be
displayed and the operation fails.)
* This function is supported only when Time 1 (Year/
Month/Day), Time 2 (Hour/Minute/Second), On Time
(Repeat Mode/Time) are set.
** It may not be supported depending on the model.
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
Transmission
Acknowledgement
[m][n][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
Data 00: Off (No off after 4 hours)
01: 4 Hours (Off after 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
68 CONTROLLING THE MULTIPLE PRODUCT
31. Auto Off (Command: f g)
34. Power Indicator (Power Light) (Command: f p)
To set the Auto Off function.
To set the Power Indicator (Power Light) function.
Transmission
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
[f][p][ ][Set ID][ ][Data][Cr]
Data 00: Off (No off after 15 minutes)
01: 15 min.(Off after 15 minutes)
Data 00: Off
01: On
** It may not be supported depending on the model.
Acknowledgement
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
[p][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set the language for OSD.
35. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Transmission
Data 00: Czech
01: Danish
[j][p][ ][Set ID][ ][Data][Cr]
02: German
03: English
Data 01: Inversion
02: Orbiter
04: Spanish (EU)
05: Greek
04: White Wash
08. Normal
06: French
07: Italian
08: Dutch
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
09: Norwegian
0A: Portuguese
0B: Portuguese (BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese (Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
36. Fail Over Select (Command: m i)
33. Power Indicator (Standby Light) (Command: f o)
To set the Fail Over function.
To set the Power Indicator (Standby Light) function.
Transmission
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
[f][o][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
Data 00: Off
01: On
02: Manual
** It may not be supported depending on the model.
Acknowledgement
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
[o][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 69
37. Fail Over Input Select (Command: m j)
To select the input source for auto switch.
* This command is only available when the fail over
(auto) mode is set to Custom.
40. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Transmission
Data FF: Check Tile Mode status.
** It may not be supported depending on the model.
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
[ ][Data4][ ][Data5][Cr]
Acknowledgement
Data 1 to 5 (Priority 1 to 5)
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
60: RGB
70: DVI-D
90: HDMI(HDMI1)
C0: Display Port
Data1 00: Tile Mode Off
01: Tile Mode On
Data2 00 to 0F: Tile Row
Data3 00 to 0F: Tile Column
91: HDMI2/SDI
* The number of data items differs depending on the
model.
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4]
[ ][Data5][x]
41. Tile ID (Command: d i)
Data 1 to 5 (Priority 1 to 5)
To set Tile ID.
60: RGB
70: DVI-D
Transmission
90: HDMI(HDMI1)
C0: Display Port
91: HDMI2/SDI
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Check Tile ID
** Data could not be set over (Tile Column) x (Tile
Row).
* The number of data items differs depending on the
model.
** It may not be supported depending on the model.
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
38. Reset (Command: f k)
*NG will be return if data is over (Tile Column) x (Tile
Row), except 0xFF.
To execute the Picture, Screen, Audio and Factory
reset function.
(Screen Reset can only be performed in RGB input
mode.)
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data 00: Picture Reset
01: Screen Reset
02: Factory Reset
03: Audio Reset
42. Tile H Position (Command: d e)
To adjust the Tile Horizontal position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00 to 32: -50 (Left) to 0 (Right)
39. Tile Mode (Command: d d)
*Left/Right values depend on Tile H size.
** It may not be supported depending on the model.
To set a Tile Mode and Tile Column/ Row values.
Transmission
Acknowledgement
[d][d][ ][Set ID][ ][Data][Cr]
[e][ ][Set ID][ ][OK/NG][Data][x]
Data 00 to FF: 1st byte - Tile Row
2nd byte - Tile Column
*00, 01, 10, 11 means Tile Mode Off.
** It may not be supported depending on the model.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
70 CONTROLLING THE MULTIPLE PRODUCT
43. Tile V Position (Command: d f)
To adjust the Tile Vertical position.
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
46. Natural Mode (In Tile Mode) (Command : d j)
To display the image naturally, the part of the image
that would normally be displayed in the gap between
the monitors is omitted.
Transmission
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
[d][f][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Data 0 to 32: 0 (Bottom) to 50 (Top)
* Bottom/Top values depend on Tile Vertical size.
** It may not be supported depending on the model.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
44. Tile H Size (Command: d g)
To adjust the Tile Horizontal Size.
*Set Tile H Position to 0x32 before setting Tile H
Size.
47. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Transmission
* Data settings may vary depending on your model
as below.
[d][g][ ][Set ID][ ][Data][Cr]
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Data 00: Off
01: 5 sec.
02: 10 sec.
03: 15 sec.
04: 1 min.
05: 3 min.
06: 5 min.
07: 10 min.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45. Tile V Size (Command: d h)
To adjust the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
48. FAN Control (Command : d o)
To set the Fan mode.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
* This function is available only when the Natural
option of the Tile Mode is set to Off while the Tile
Mode set to On.
Data 00: Auto
01: On
02: Manual
03: Off
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
** It may not be supported depending on the model.
Data 00 to 32: 0 to 50
** It may not be supported depending on the model.
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 71
49. FAN Fault Check (Command: d w)
51. Remote Controller Lock/ Key Lock
(Command: k m)
To check the fan errors.
When the remote control and front keys are locked in
standby mode, the power cannot be turned on using
the remote control or front power button.
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Off (Lock Off)
Data 00: Fan fault
01: On (Lock On)
01: Fan OK
02: Model without a Fan
For 72WX70MF, see the following.
* Display will not be turned on by power on key of
remote controller and front panel control keys, if key
is locked on in standby mode.
[w][ ][Set ID][ ][OK/NG][Data1][Data2][x]
Acknowledgement
Data1 00: One or more fans are faulty.
01: All fans are OK.
02: The model has no fan.
Data2 00: No fan is faulty (all fans are OK).
01: 1 fan is faulty.
[m][ ][Set ID][ ][OK/NG][Data][x]
** It may not be supported depending on the model.
02: 2 fans are faulty.
03: 3 fans are faulty.
04: 4 fans are faulty.
05: 5 fans are faulty.
06: 6 fans are faulty.
52. Key (Command: m c)
To send a key code of the IR remote control.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
For a key code, see the IR Code.
* Some key codes are not supported depending on
the model.
50. Temperature Value (Command: d n)
To check the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Check the status
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[n][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
53. OSD Select (Command: k l)
* Temperature is displayed in hexadecimal.
Up to Data3 are provided as 72WX70MF has 3
temperature sensors.
Data1: Temperature sensor at the exit (top).
Data2: Temperature sensor at the entrance (bottom).
Data3: Temperature sensor at the main board (main
PCB).
To select OSD(On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
72 CONTROLLING THE MULTIPLE PRODUCT
57. White Balance Red Gain (Command: j m)
54. Elapsed time return (Command: d l)
To set the White Balance Red Gain.
To check the panel used time.
Transmission
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red Gain 0 to 254
Acknowledgement
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Read the status
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
58. White Balance Green Gain (Command: j n)
55. Serial No.Check (Command: f y)
To set the White Balance Green Gain.
To check the Serial Numbers.
Transmission
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green Gain 0 to 254
Acknowledgement
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Check the product Serial Number
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
59. White Balance Blue Gain (Command: j o)
56. S/W Version (Command: f z)
To set the White Balance Blue Gain.
To check the Software Version.
Transmission
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue Gain 0 to 254
Acknowledgement
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Check the Software version
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
[z][ ][Set ID][ ][OK/NG][Data][x]
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLLING THE MULTIPLE PRODUCT 73
60. Backlight (Command: m g)
63. Reading luminance values (Command: m u)
To adjust the screen backlight.
Reads luminance values.
Transmission
Transmission
[m][u][ ][Set ID][ ][FF][Cr]
[m][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Backlight 0 to 100
Acknowledgement
Acknowledgement
[u][][SetID][][OK/NG][Data1][Data2][Data3][Data4]
[Data5][Data6][Data7][x]
[g][][set ID][][OK/NG][Data][x]
** It may not be supported depending on the model.
Data1 00-64 backlight 0-100
Data2 00-ff: Upper 2-byte of CA210 measured value
Data3 00-ff: Lower 2-byte of CA210 measured value
CA210 measured value Hex: 0000-ffff, Decimal: 0 - 65535
Data4 00-ff: Upper 2-byte of BLU measured value
Data5 00-ff: Lower 2-byte of BLU measured value
Data6 00-ff: Upper 2 bytes of BLU No. 2 sensor
measured value
Data7 00-ff: Lower 2 bytes of BLU No. 2 sensor
measured value
BLU measured value Hex: 0000-ffff, Decimal: 0 - 65535
* CA210 measured value is entered through the
calibration procedure during final assembly. Default
value is 0 before calibration.
61. PC Power Control (Command: d t)
To control the PC power if the PC and the monitor
are synchronized.
Transmission
[d][t][ ][Set ID][ ][Data][Cr]
** It may not be supported, depending on the model.
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
** It may not be supported depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
00: Synchronized (When the monitor is off, the PC is
also turned off.)
01: Not synchronized (The monitor is off but the PC
is on.)
62. PC Power (Command: d s)
Control the PC power.
Transmission
[d][s][ ][Set ID][ ][Data][Cr]
Data 00: PC is turned off.
01: PC is turned on.
** It may not be supported depending on the model.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data 00: PC is turned off.
01: PC is turned on.
Download from Www.Somanuals.com. All Manuals Search And Download.
74 CONTROLLING THE MULTIPLE PRODUCT
64. Status check (Command: s v)
65. BLU Maintenance (Command: m t)
Check various statuses.
Select ON/OFF of BLU Maintenance.
Transmission
Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
[m][t][ ][Set ID][ ][Data][Cr]
Data 05: Check the normal operation of No.1 and
No.2 luminance sensors.
Data 00: BLU Maintenance OFF
01: BLU Maintenance ON
06: luminance sensor being used:
07: Check the normal operation of top, bottom,
or main temperature sensors.
** It may not be supported, depending on the model.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
When the Data is 05
Data100: All normal
01: BLU sensor 1 normal, BLU sensor 2 fail
02: BLU sensor 1 fail, BLU sensor 2 normal
03: All fail
When the Data is 06
Data100: No.1 luminance sensor is being used
01: No.2 luminance sensor is being used
66. Mirror mode (Command: t a)
Sets the Mirror mode to Off/On/Auto.
Transmission
[t][a][ ][Set ID][ ][Data][Cr]
When the Data is 07
Data100: All temperature sensors fail
01: Top normal, Bottom fail, Main fail
02: Top fail, Bottom normal, Main fail
03: Top normal, Bottom normal, Main fail
04: Top fail, Bottom fail, Main normal
05: Top normal, Bottom fail, Main fail
06: Top fail, Bottom normal, Main fail
07: All temperature sensors normal
Data 00: Mirror mode OFF
01: Mirror mode ON
02: Mirror mode Auto
** It may not be supported, depending on the model.
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
When the Data is 08
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][Data3][x]
Data1: Temperature of the top sensor area when the
set is powered off.
Data2: Temperature of the bottom sensor area when
the set is powered off.
Data3: Temperature of the main sensor area when
the set is powered off.
When the Data is 09
Acknowledgement
[v][ ][SetID][ ][OK/NG][Data][Data1][Data2][x]
Data1 00-ff: Upper 2-byte of Fan Speed
Data2 00-ff: Lower 2-byte of Fan Speed
Fan Speed: Hex 0-20D0, Decimal 0-8400
** It may not be supported, depending on the model.
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain the source code under GPL, LGPL,
MPL and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such
as the cost of media, shipping and handling)
upon email request to [email protected].
This offer is valid for three (3) years from the
date on which you purchased the product.
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
WARNING -This is a class A product. In a domestic
environment this product may cause radio
interference in which case the user may be required
to take adequate measures.
Temporary noise is normal when powering ON or
OFF this device.
MODEL
SERIAL
Download from Www.Somanuals.com. All Manuals Search And Download.
|