LG Electronics Computer Monitor 47VL10 User Manual

OWNER’S MANUAL  
MONITOR SIGNAGE  
Please read this manual carefully before operating the  
your set and retain it for future reference.  
MONITOR SIGNAGE MODEL  
47VL10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
LICENSES  
LICENSES  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks  
or registered trademarks of HDMI Licensing LLC.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
ASSEMBLING AND PREPARING  
ASSEMBLING AND PREPARING  
Accessories  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual product  
and accessories.  
Power Cord  
Remote control and Batteries  
15-pin D-SUB Signal Cable  
User Manual/Card  
CAUTION  
Do not use any pirated items to ensure the safety and product life span.  
Any damages or injuries by using pirated items are not covered by the warranty.  
y
y
NOTE  
The accessories supplied with your product may vary depending on the model.  
Product specifications or contents in this manual may be changed without prior notice due to upgrade  
of product functions.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
5
Optional Accessories  
Without prior notice, optional accessories are subject to change to improve the performance of the product,  
and new accessories may be added. The illustrations in this manual may differ from the actual product and  
accessories.  
Stand  
Screws  
Speaker  
Screws/Cable  
Cable holder/  
cable management  
Cable Tie  
Stand kit  
Speaker kit  
Screws  
Stand hole cover  
Stand hole cover  
kit  
NOTE  
Cable holder/Cable tie may not be available in some areas or for some models.  
Optional accessories are not included for all models.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
ASSEMBLING AND PREPARING  
Parts and buttons  
Screen Buttons  
Screen Marks  
Connection panel  
Description  
Screen Marks  
INPUT  
Changes the input source.  
MENU  
Accesses the main menus, or saves your input and exits the menus.  
Adjust the up and down.  
▼▲  
◄ ►  
Adjusts the volume level.  
AUTO/SET  
/ I  
For optimal screen display, automatically adjusts screen resolution.  
Turns the power on or off.  
IR Receiver  
Power Indicator  
This is where the unit receives signals from the remote control.  
This Indicator lights up blue when the display operates normally(on mode). If the display  
is in sleep (Energy Saving) mode, this indicator color changes to amber.  
NOTE  
You can set the Power indicator to on or off by selecting OPTION in the main menus.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
7
Connecting the stand  
Connecting the Speakers  
- Only on some models.  
- Only on some models.  
Take the parts for the stand out of the box and  
assemble them as shown in the picture.  
Mount the product onto the speaker by using  
a screw as shown in the following connect the  
speaker cable.  
1
1
Screws  
Stand  
cable management  
After installing your speakers, use holders and  
cable ties to organize the speaker cables. (This  
feature is not available in all model.)  
2
Place a soft cloth on the table and put the  
product with the screen facing downward.  
Connect the stand as shown in the following  
2
picture.  
Use the screws to secure the stand on the rear  
side of the product as shown in the diagram.  
3
NOTE  
Connect the speaker terminals noting the  
correct polarity.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
ASSEMBLING AND PREPARING  
Using the Kensington security system  
Cable Management  
The Kensington security system connector is  
located at the back of the Monitor set. For more  
information of installation and using, refer to the  
manual supplied with the Kensington security  
system or visit http://www.kensington.com.  
- Only on some models.  
Arrange the cables in the center as shown in  
the following picture.  
1
Connect the Kensington security system cable  
between the Monitor set and a table.  
Fit the cable management to the back to help  
manage the cables.  
2
NOTE  
For removing the cable management, hold the  
Cable management with both hands and pull it  
downward.  
3
The Kensington security system is optional.  
You can obtain additional accessories from  
most electronics stores.  
y
NOTE  
Do not use the cable management as a  
handle for the Monitor.  
y
The illustrations in this manual may differ  
from actual cable interfaces.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
9
Connecting stand hole cover  
To install Portrait  
- Only on some models.  
- Only on some models.  
Take the parts for the stand out of the box and  
assemble them as shown in the picture.  
1
When installing Portrait, rotate it clockwise based  
on its front.  
Stand hole cover  
Screws  
Place a soft cloth on the table and put the  
product with the screen facing downward.  
Connect the stand hole cover as shown in the  
following picture.  
2
NOTE  
When using the wall mounting bracket or  
the portrait scene mode, the opening can be  
covered by the stand hole cover.  
y
Use the screws to secure the stand hole cover  
on the rear side of the product as shown in the  
diagram.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
10 ASSEMBLING AND PREPARING  
Installing on a wall  
CAUTION  
Disconnect the power cord first, and then  
move or install the Monitor set. Otherwise  
electric shock may occur.  
If you install the Monitor set on a ceiling or  
slanted wall, it may fall and result in severe  
injury. Use an authorized LG wall mount  
and contact the local dealer or qualified  
personnel.  
y
y
Install the monitor at least 10 cm away from the  
wall and leave about 10 cm of space at each side  
of the monitor to ensure sufficient ventilation. De-  
tailed installation instructions can be obtained from  
your local retail store. Please refer to the manual  
to install and set up a tilting wall mounting bracket.  
Do not over tighten the screws as this may  
cause damage to the Monitor set and void  
your warranty.  
Use the screws and wall mounts that  
meet the VESA standard. Any damages  
or injuries by misuse or using an improper  
accessory are not covered by the warranty.  
y
y
10 cm  
10 cm  
10 cm  
10 cm  
NOTE  
If you want to mount the monitor on the wall (op-  
tional), attach the wall mounting bracket to the rear  
of the monitor.  
Make sure that the wall mounting bracket is se-  
curely fixed to the monitor and to the wall.  
Use the wall mount plate and screws that comply  
with the VESA standard as specified below.  
Use the screws that are listed on the VESA  
standard screw specifications.  
The wall mount kit includes an installation  
manual and necessary parts.  
The wall mount bracket is optional. You can  
obtain additional accessories from your local  
dealer.  
The length of screws may differ depending  
on the wall mount. Be sure to use the proper  
length.  
y
y
y
785mm(31 inch) or greater  
y
* Fastening screw: Diameter 6.0 mm x Pitch 1.0  
mm x Length 10 mm  
(32 inch is Diameter 4.0 mm x Pitch 0.7 mm x  
Length 10 mm)  
y
y
For more information, refer to the  
instructions supplied with the wall mount.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REMOTE CONTROL 11  
REMOTE CONTROL  
The descriptions in this manual are based on the buttons of the remote  
control. Please read this manual carefully and use the Monitor set correctly.  
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)  
matching  
and  
ends to the label inside the compartment, and close the  
battery cover. To remove the batteries, perform the installation actions in  
reverse.  
CAUTION  
Do not mix old and new batteries, as this may damage the remote control.  
y
Make sure to point the remote control to the remote control sensor on the Monitor set.  
(POWER)  
INPUT  
Turns the Monitor set on or off.  
Selects the input mode.  
ARC  
AV  
Toggles through video.  
AV -> RGB PC -> HDMI/DVI  
Aspect Ratio Correction.  
Toggles through aspect ratio  
options.  
Auto  
Automatic adjustment function  
(Operational for the analog  
signal only)  
Sleep  
When watching AV, RGB  
PC,HDMI/DVI.The product will  
be automatically turned off after  
a certain period of time.  
Press this button repetitively  
to select an appropriate time  
duration.  
There is not a function  
which is supported  
PSM  
Toggles through preset video  
settings.  
Menu  
Exit  
Volume ◄ ►  
Volume up and down.  
UP and Down  
Bring up and down direction  
adjustment.  
Check  
Mute  
There is not a function  
which is supported.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 USING THE MONITOR SET  
USING THE MONITOR SET  
Using the input list  
Connecting to a PC  
Your Monitor set supports the Plug & Play* feature .  
Selecting an input source  
* Plug & Play: The function when a PC recognizes  
a connected device that users connect to a PC  
and turn on, without device configuration or user  
intervention.  
Press INPUT to access the input source list.  
1
- The connected device displays on each input  
source.  
Press the Navigation buttons to scroll to one of  
the input sources and press OK.  
2
Input source  
AV  
Description  
NOTE  
Watch the contents in a VCR or  
other external devices  
It is recommended to use the Monitor set  
with the HDMI connection for the best image  
quality.  
Use a shielded signal interface cable, such  
as D-sub 15 pin signal cable and DVI/  
HDMI cable, with a ferrite core to maintain  
standard compliance for the product.  
If you turn the Monitor set on when the set  
becomes cold, the screen may flicker. This  
is normal.  
y
y
RGB-PC  
View a PC display on the screen  
HDMI/DVI  
Watch contents in a PC, DVD  
or Digital settop box other high  
definition devices  
y
y
Some red, green, or blue spots may appear  
on the screen. This is normal.  
CAUTION  
Connect the signal  
input cable and tighten  
it by turning the screws  
clockwise.  
y
Do not press the screen with your finger for  
a long time as this may result in temporary  
distortion on the screen.  
Avoid displaying a fixed image on the  
screen for a long period of time to prevent  
image burn. Use a screensaver if possible.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MONITOR SET 13  
RGB connection  
HDMI/DVI connection  
Transmits the analog video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the D-sub 15 pin cable as shown the  
following illustrations.  
Transmits the digital video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the HDMI/DVI cable as shown the  
following illustrations.  
Select RGB input source.  
Select HDMI/DVI input source.  
PC  
PC  
PC/MAC  
PC  
(not included)  
(not included)  
(not included)  
Macintosh Adapter  
(not included)  
Back of the Monitor Set  
Back of the Monitor Set  
NOTE  
NOTE  
Use the standard  
y
Macintosh adapter  
since an incompatible  
adapter is available in  
the market. (Different  
signaling system)  
When HDMI PC is used, a compatiblity  
problem might occur.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
14 USING THE MONITOR SET  
HDMI connection  
Connecting to the LAN  
Transmits the digital video and audio signals from  
your PC to the Monitor set. Connect the PC and  
the Monitor set with the HDMI cable as shown in  
the following illustrations.  
LAN connection  
Connect the LAN cable and install the eZ-Net  
Manager program on the CD-ROM.  
Select HDMI/DVI input source.  
For more information about the program, please  
refer to eZ-Net Guide in the enclosed CD-ROM.  
PC  
Connect PC to Monitor directly.  
A
LAN  
Monitor Set  
PC  
(not included)  
Using a router(Switch)  
B
LAN  
Switch  
HDMI/DVI IN  
Monitor Set  
PC  
Back of the Monitor Set  
Using the Internet.  
LAN  
C
NOTE  
Use a High Speed HDMI™ Cable.  
y
y
Network  
Please check the PC environment if you  
cannot hear the sound in HDMI mode.  
If you want to use HDMI-PC mode, you must  
set the input label to PC mode.  
Monitor Set  
PC  
y
NOTE  
Using LAN establishes communication  
between your PC and the monitor and  
y
enables to use the OSD menus on the PC as  
well as on the monitor.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CUSTOMIZING SETTINGS 15  
CUSTOMIZING SETTINGS  
Accessing main menus  
Press MENU to access the main menus.  
1
2
3
4
Press the Navigation buttons to scroll to one of the following menus and press SET.  
Press the Navigation buttons to scroll to the setting or option you want and press SET.  
When you are finished, press EXIT.  
Adjusts the image size, quality, or  
effect  
Adjusts the sound quality, effect, or  
volume level  
Sets the time, date or Timer feature  
Customizes the general settings  
INFORMATION ( See p.25 )  
Adjust Set ID and check Serial No.  
and SW version.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16 CUSTOMIZING SETTINGS  
PICTURE settings  
Picture  
Picture Mode  
Color Temperature  
Advanced  
Aspect Ratio  
Picture Reset  
Screen  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to PICTURE and  
press SET.  
Press the Navigation buttons to scroll to the setting or  
option you want and press SET.  
3
4
- To return to the previous level, press  
.
When you are finished, press EXIT.  
MENU  
The available picture settings are described in the following:  
Setting  
Description  
Picture Mode  
Selects one of the preset image or customizes options in each mode for the best Monitor set screen  
performance. You are also able to customize advanced options of each mode.  
The available preset picture modes vary depending on the Monitor set .  
Mode  
Vivid  
Adjusts the video image for the retail environment by enhancing the contrast,  
brightness, Colour, and sharpness.  
Standard  
Cinema  
Adjusts the image for the normal environment.  
Optimizes the video image for a cinematic look to enjoy movies as if you are  
in a movie theater.  
Sport  
Optimizes the video image for high and dynamic actions by emphasizing  
primary Colours such as white, grass, or sky blue.  
Game  
Optimizes the video image for a fast gaming screen such as PCs or games.  
User 1,2  
Adjusts the detailed video image settings for video experts as well as general  
viewers.  
Backlight  
Adjusts the brightness of the screen by controlling the LCD backlight. If you  
decrease the brightness level, the screen becomes darker and the power  
consumption will be reduced without any video signal loss.  
Contrast  
Increases or decreases the gradient of the video signal. You may use  
Contrast when the bright part of the picture is saturated.  
Brightness  
Adjusts the base level of the signal in the picture. You may use Brightness  
when the dark part of the picture is saturated.  
Color  
Adjusts intensity of all Colors.  
Sharpness  
Adjusts the level of clearness of the picture. The lower the level, the softer the  
image.  
Tint  
Adjusts the balance between red and green levels.  
Expert  
To compensate for each image mode, or adjust image values according to  
a particular image. (Applied only to User2 menu.) (Function works in the  
following mode - AV, HDMI-DTV)  
NOTE  
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard,  
Cinema, Sport or Game the subsequent menus will be automatically set.  
You cannot adjust colour and tint in the RGB-PC / HDMI-PC mode.  
When the User 1,2 is selected, you can select Backlight, Contrast,  
y
y
y
Expert  
Brightness, Color, Sharpness, Tint or  
.
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 17  
Setting  
Description  
Color Settings  
Option  
Cool  
Color  
Temperature  
Sets the screen color to a bluish tone.  
Sets the screen to the standard color.  
Sets the screen color to a reddish tone.  
Medium  
Warm  
User  
Select this option to use the user-defined settings.  
Gamma  
(Low/Medium/High)  
You can adjust brightness of dark area and middle gray level area of the  
picture.  
Advanced  
» Low: Make dark and middle gray level area of the picture brighter.  
» Medium: Express original picture levels.  
» High: Make dark and middle gray level area of the picture darker.  
Film Mode  
(On/Off)  
You can watch a cinema-like video by eliminating judder effect.  
Use this function when you watch movies.  
Black Level  
(Low/High)  
» Low: The picture of the screen gets darker.  
» High: The picture of the screen gets brighter.  
Set black level of the screen to proper level.  
This function enables to select 'Low' or 'High' in the following mode: AV, HDMI-  
DTV.  
* This is available in AV,HDMI-DTV.  
NR  
Reduces screen noise without compromising video quality.  
(Off/Low/High/  
Adaptive)  
Aspect Ratio  
Picture Reset  
Changes the image size to view images at its optimal size.  
Return Picture Mode, Color Temperature, Advanced, Aspect Ratio to the default factory settings.  
SCREEN  
(In RGB)  
Customizes the PC display options in RGB mode.  
Option  
Auto Config. (RGB  
PC input only)  
This button is for the automatic adjustment of the screen position, clock and  
phase. This function is available for analog signals only.  
* Phase, Clock function are not available in HDMI/DVI DTV.  
Manual Config.  
If the picture isn't clear after auto adjustment and characters are still  
trembling, adjust the picture phase manually.  
* Phase, Clock function are not available in HDMI/DVI DTV.  
Phase : To adjust the focus of the display. This item allows you to remove any  
horizontal noise and clear or sharpen the image of characters. This  
function is available for analog signals only.  
Clock : To minimize any vertical bars or stripes visible on the screen  
background. The horizontal screen size will also change. This function  
is available for analog signals only.  
H-Position : Moving the screen position horizontally.  
V-Position : Moving the screen position vertically.  
H-Size : Adjust the horizontal size of the screen.  
V-Size : Adjust the vertical size of the screen.  
XGA Mode (RGB-PC For more improved or better picture quality, select the same mode  
only)  
corresponding to computer resolution.  
Reset  
Return Manual config. and XGA Mode to the default factory settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18 WATCHING TV  
Aspect Ratio  
- Original : The aspect ratio is not adjusted from  
the original. It is set by the program being  
watched.  
Resize the image to view the image at its optimal  
size by pressing ARC button while you are  
watching Monitor set.  
CAUTION  
If a fixed image displays on the screen for a  
long period of time, it will be imprinted and  
become a permanent disfigurement on the  
screen. This is “image burn” or “burn-in” and  
not covered by the warranty.  
If the aspect ratio is set to 4:3 for a long  
period of time, image burn may occur on  
the letterboxed area of the screen.  
y
y
Original  
- 4:3 : The following selection will allow you to  
view a picture with an original 4:3 aspect ratio,  
gray bars will appear on both the left and right of  
the screen.  
NOTE  
You can also change the image size by  
accessing the main menus.  
y
- 16:9 : The following selection will allow you  
to adjust the picture horizontally, in linear  
proportion, to fill the entire screen(useful for  
viewing 4:3 formatted DVDs).  
- 1:1 : The aspect ratio is not adjusted from the  
original. (Only HDMI/DVI PC, RGB PC)  
- Just Scan: Following Selection will lead to you  
view the picture of best quality without loss of  
original picture in high resolution image.  
* Note: If there is noise in original Picture, You can  
see the noise at the edge.  
Just Scan  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WATCHING TV 19  
14:9 : You can view a picture format of 14:9 or a  
general Monitor set programme in the 14:9 mode.  
The 14:9 screen is viewed in the same way as in  
4:3, but is magnified to the left and right.  
- Zoom 1,2 : The following selection will allow you  
to view the picture without any alteration, while  
filling the entire screen. However, the top and  
bottom of the picture will be cropped.  
MODE AV  
HDMI/DVI  
RGB  
PC  
o
ARC  
DTV  
o
PC  
o
x
16:9  
o
x
o
o
x
o
o
o
Just Scan  
Original  
4:3  
o
x
x
x
x
o
o
o
x
o
1:1  
x
o
14:9  
x
x
Zoom 1  
Zoom 2  
x
x
x
x
x
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
20 CUSTOMIZING SETTINGS  
AUDIO settings  
AUDIO  
Sound Mode  
Auto Volume  
Balance  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to AUDIO and press  
SET.  
Speaker  
Press the Navigation buttons to scroll to the setting or  
option you want and press SET.  
3
4
- To return to the previous level, press  
.
When you are finished, press EXIT.  
MENU  
The available audio options are described in the following:  
Setting  
Description  
Sound Mode  
Selects one of the preset sound modes or customize each option in each mode.  
Mode  
Clear Voice  
By differentiating the human sound range from others,it helps users listen to  
human voices better.  
Standard  
Music  
Select when you want standard-quality sound.  
Select when you listen to music.  
Cinema  
Sport  
Select when you watch movies.  
Select when you watch sports events.  
Select when you play games.  
Game  
User  
Select this option to use the user-defined audio settings.  
NOTE  
If sound quality or volume is not at the level you want, it is recommended to  
use a separate home theater system or amplifier to cope with different user  
environments.  
y
Auto Volume  
Activates the Auto Volume feature to keep the volume level consistent whenever you change  
programmes.  
Balance  
Speaker  
Adjusts balance between the left and right speakers according to your room environment.  
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)  
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 21  
TIME settings  
TIME  
Sleep Timer  
Auto Sleep  
Power On Delay  
Power Saving  
Automatic Standby  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to TIME and press  
SET.  
Press the Navigation buttons to scroll to the setting or option  
you want and press SET.  
3
- To return to the previous level, press  
.
When you are finished, press EXIT.  
4
MENU  
The available time settings are described in the following:  
Setting  
Description  
Sleep Timer  
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and  
turn it on again, the Sleep Timer will be set to off.  
Auto Sleep  
If Auto Sleep is active and there is no input signal, the set switches to off mode automatically  
after 10 minutes.  
Power On Delay  
Power Saving  
When connecting multiple monitors and turning the power on, the monitors are turned on  
individually to prevent overload.  
This screen brightness adjusting menu helps you save energy.  
Level: Total 4 screen brightness levels are provided.  
- Off: 100% light  
- Level 1: 80% light  
- Level 2: 60 % light  
- Level 3: 40% light  
Automatic  
Standby  
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.  
NOTE  
The "Automatic Standby" function may be disabled depending of the model.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
22 CUSTOMIZING SETTINGS  
OPTION settings  
OPTION  
Language  
Key Lock  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to OPTION and press  
SET.  
ISM Method  
Power Indicator  
DPM Select  
Tile Mode  
Network Setup  
Factory Reset  
Press the Navigation buttons to scroll to the setting or  
option you want and press SET.  
3
- To return to the previous level, press  
.
When you are finished, press EXIT.  
4
MENU  
The available option settings are described in the following:  
Setting  
Language  
Description  
To choose the language in which the control names are displayed.  
Key Lock  
Use the buttons to select On or Off. The monitor can be set up so that it can only be used with  
the remote control. This feature can prevent unauthorized viewing.  
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.  
In order to unlock it, do the following :  
Push the MENU button on the remote control and set Key Lock to the 'Off' position.  
ISM Method  
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods  
could result in a ghost image remaining even when you change the image. Avoid allowing a  
fixed image to remain on the screen for a long period of time.  
Mode  
Normal  
Leave on normal if you don't foresee image burn in being a problem.  
White wash  
White wash fills the screen with solid white. This helps removes permanent  
images burned into the screen. A permanent image may be impossible to  
clear entirely with white wash.  
Orbiter  
May help prevent ghost images. However, it is best not to allow any fixed  
image to remain on the screen. To avoid a permanent image on the screen,  
the screen will move every 2 minutes.  
Inversion  
Dot Wash  
This function inverts the panel color of the screen. The panel color is  
automatically inverted every 30 minutes.  
This function moves the black dots of the screen. The black dots is  
automatically moved every 5 second.  
Power Indicator  
DPM Select  
Use this function to set the power indicator on the front side of the product to On or Off.  
A user can choose to turn the power saving mode on / off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS 23  
Setting  
Tile Mode  
Description  
To use this function  
- Must be displayed with various other products.  
- Must be in a function that can be connected to RGB Cable by distributor and RS-232C.  
Tile mode and choose Tile alignment and set the ID of the current product to set location.  
* Only after pressing the SET button the adjustments made to the settings will be saved.  
- Tile mode : column x row ( c = 1, 2, 3, 4,5 r = 1, 2, 3, 4,5)  
- 5 x 5 available.  
- Configuration of an integration screen is available as well as configuration of One by one  
Display.  
Mode  
H-Size  
Adjust the horizontal size of the screen taking into account the size of the  
bezel.  
V-Size  
Adjust the vertical size of the screen taking into account the size of the bezel.  
Moving the screen position horizontally.  
H-Position  
V-Position  
Reset  
Moving the screen position vertically.  
Function to initialize and release Tile.  
All Tile setting are released when selecting Tile recall and the screen returns  
to Full screen.  
Tile ID  
Select the location of the Tile by setting an ID.  
Natural  
The image is omitted by the distance between the screens to be naturally  
shown.  
Network Setup  
Factory Reset  
- DHCP : Allocates and sets up IP automatically.  
- Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.  
The setup process is complete when you select Execute, and "IP Setup Completed" is displayed  
at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys  
and remote control. "Wait for IP Setup" is displayed for up to 40 seconds.  
* If Network select is set to RS232C.DHCP and Manual are disabled.  
Select this option to return to the default factory settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24 CUSTOMIZING SETTINGS  
Tile Mode  
Configuration of an integration screen is available as well as configuration of One by one Display.  
• 2X1:  
• 2X2:  
• Off:  
• 3X3:  
When using 4 monitors  
When the Tile  
Mode option is  
disabled  
When using 2 monitors  
When using 9 monitors  
ID 2  
ID 1  
ID 2  
ID 1  
ID 3  
ID 6  
ID 2  
ID 5  
ID 1  
ID 4  
ID 4  
ID 3  
Tile ID  
ID 9  
ID 8  
ID 7  
• 4X4:  
• 5X5:  
When using 16 monitors  
When using 25 monitors  
ID 3  
ID 4  
ID 5  
ID 2  
ID 1  
ID 1  
ID 5  
ID 3  
ID 7  
ID 4  
ID 8  
ID 2  
ID 6  
ID 8  
ID 9  
ID 10  
ID 15  
ID 7  
ID 6  
ID 13  
ID 18  
ID 23  
ID 14  
ID 19  
ID 24  
ID 12  
ID 11  
ID 16  
ID 21  
ID 11  
ID 15  
ID 12  
ID 16  
ID 10  
ID 14  
ID 9  
ID 20  
ID 25  
ID 17  
ID 22  
ID 13  
Tile Mode - Natural mode  
To display the image naturally, the part of the image that would normally be displayed in the gap between  
the monitors is omitted.  
Before  
After  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS 25  
INFORMATION settings  
INFORMATION  
Set ID  
Press MENU to access the main menus.  
1
2
Serial No.  
SW Version  
IPAddress  
MAC Address  
Press the Navigation buttons to scroll to OPTION and press  
SET.  
Press the Navigation buttons to scroll to the setting or  
option you want and press SET.  
3
4
- To return to the previous level, press  
.
When you are finished, press EXIT.  
MENU  
The available option settings are described in the following:  
Setting  
Set ID  
Description  
You can assign a unique Set ID NO (name assignment) to each product when several products  
are connected for display. Specify the number (1 to 99) using the button and exit. Use the  
assigned Set ID to individually control each product using the Product Control Program.  
Serial No.  
This menu shows the serial number of the product.  
This menu shows the software version.  
SW Version  
IP Address  
Displays a selected network's IP address.  
Displays a selected network's MAC address.  
MAC Address  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
26 MAKING CONNECTIONS  
MAKING CONNECTIONS  
Connect various external devices to the ports on the Monitor set’s back panel.  
Find an external device you want to connect to your Monitor set shown on the following illustration.  
Check the connection type of the external device.  
1
2
3
Go to the appropriate illustration and check the connection details.  
HD Receiver  
DVD  
VCR  
AV(CVBS)-See  
Speaker  
PC  
Camcorder/Camera  
Gaming device  
AV(CVBS)-See  
LAN  
NOTE  
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
MAKING CONNECTIONS 27  
HDMI/DVI connection  
Connecting to a HD receiver,  
DVD, Camcorder, Camera,  
Gaming Device or VCR  
player  
Transmits the digital video signal from an external  
device to the Monitor set. Connect the external  
device and the Monitor set with the HDMI/DVI  
cable as shown in the following illustration. To  
transmit an audio signal, connect an optional audio  
cable.  
Connect a HD receiver, DVD, or VCR player to the  
Monitor set and select an appropriate input mode.  
HDMI connection  
Transmits the digital video and audio signals from  
an external device to the Monitor set. Connect the  
external device and the Monitor set with the HDMI  
cable as shown on the following illustration.  
HDMI/DVI  
Signal Cable  
(not included)  
RCA-PC  
Audio Cable  
(not included)  
HDMI Signal Cable  
(not included)  
NOTE  
Use a High Speed HDMI™ Cable.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
28 MAKING CONNECTIONS  
AV(CVBS) connection  
Transmits the digital video and audio signals from  
an external device to the Monitor set. Connect the  
external device and the Monitor set with the BNC  
cable as shown on the following illustration.  
RCA-PC  
BNC Cable  
Audio Cable  
(not included)  
(not included)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
TROUBLESHOOTING 29  
TROUBLESHOOTING  
No image is displayed  
Problem  
Resolution  
Is the product power cord  
connected?  
See if the power cord is properly connected to the outlet.  
y
Is the power indicator light on?  
See if the power switch is turned on.  
May need service.  
y
y
Power is on, power indicator is blue  
but the screen appears extremely  
dark.  
Adjust brightness and contrast again.  
Backlight may need repair.  
y
y
The power indicator amber?  
If the product is in power saving mode, move the mouse or press any  
y
key.  
Turn both devices off and then back on.  
y
y
Does the 'Out of range' message  
appear?  
The signal from the PC (video card) is out of the vertical or horizontal  
frequency range of the product. Adjust the frequency range by  
referring to the Specifications in this manual.  
* Maximum resolution  
RGB : 1920 x 1080 @ 60 Hz  
HDMI/DVI : 1920 x 1080 @ 60 Hz  
Does the 'No signal' message  
appear?  
The signal cable between PC and product is not connected. Check  
the signal cable.  
Press the 'INPUT' menu in the remote Control to check the input  
signal.  
y
y
NOTE  
Vertical frequency: To enable the user to watch the product display, screen image should be changed  
tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times  
of image display per second. The unit is Hz.  
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided  
by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as  
the horizontal frequency. The unit is kHz.  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
30 TROUBLESHOOTING  
'Unknown Product' message appears when the product is connected.  
Problem  
Resolution  
Did you install the driver?  
Install the product driver, which is provided with the product, or  
download it from the web site. (http://www.lg.com)  
See if the plug&play function is supported by referring to the video  
card user manual.  
y
y
'Key Lock On' message appears.  
Problem  
Resolution  
The 'Key Lock On' message  
appears when pressing the Menu  
button.  
The control locking function prevents unintentional OSD setting  
change due to careless usage. To unlock the controls, simultaneously  
y
press the Menu button and  
button for several seconds. (You  
cannot set this function using the remote control buttons. You can set  
this function in the product only.)  
The screen image looks abnormal.  
Problem  
Resolution  
Is the screen position wrong?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select the optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Position OSD  
menu.  
y
See if the video card resolution and frequency are supported by the  
product. If the frequency is out of range, set to the recommended  
resolution in the Control Panel "Display" Setting menu.  
y
Do thin lines appear on the  
background screen?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Clock OSD  
menu.  
y
Horizontal noise appears or the  
characters look blurred.  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Phase OSD  
menu.  
y
The screen is displayed abnormally.  
The proper input signal is not connected to the signal port. Connect  
the signal cable that matches with the source input signal.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING 31  
After-image appears on the product.  
Problem  
Resolution  
After-image appears when the  
product is turned off.  
If you use a fixed image for a long time, the pixels may be damaged  
quickly. Use the screen-saver function.  
y
The audio function does not work.  
Problem  
Resolution  
No sound?  
See if the audio cable is connected properly.  
Adjust the volume.  
See if the sound is set properly.  
y
y
y
Sound is too dull.  
Select the appropriate equalize sound.  
y
Sound is too low.  
Adjust the volume.  
y
Screen color is abnormal.  
Problem  
Resolution  
Screen has poor color resolution  
(16 colors).  
Set the number of colors to more than 24 bits (true color) Select  
Control Panel - Display - Settings - Color Table menu in Windows.  
y
y
y
Screen color is unstable or mono-  
colored.  
Check the connection status of the signal cable. Or, re-insert the PC  
video card.  
Do black spots appear on the  
screen?  
Several pixels (red, green, white or black color) may appear on the  
screen, which can be attributable to the unique characteristics of the  
LCD panel. It is not a malfunction of the LCD.  
The operation does not work normally.  
Problem  
Resolution  
The power suddenly turned off.  
Is the sleep timer set?  
Check the power control settings. Power interrupted.  
"Caution, Fan Error!"  
y
y
y
If the power is turned off after this message appears, it means that  
the fan is out of order.In this case, contact your local service center.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32 SPECIFICATIONS  
SPECIFICATIONS  
LCD Panel  
Screen Type  
1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel.  
Visible diagonal size : 1192.8 mm  
Pixel Pitch  
0.5415 mm (H) x 0.5415 mm (V)  
Video Signal  
Max. Resolution  
RGB : 1920 X 1080 @60Hz  
HDMI/DVI : 1920 X 1080 @60Hz  
- It may not be supported depending on the OS or video card type.  
Recommended Resolution RGB : 1920 X 1080 @60Hz  
HDMI/DVI : 1920 X 1080 @60Hz  
- It may not be supported depending on the OS or video card type.  
Horizontal Frequency  
Vertical Frequency  
Synchronization Type  
RGB : 30 kHz to 83 kHz  
HDMI/DVI : 30 kHz to 83 kHz  
RGB : 56 Hz to 75 Hz  
HDMI/DVI : 56 Hz to 60 Hz  
Separate Sync, Composite Sync, Digital  
Input Connector  
Power  
15-pin D-Sub type, HDMI (digital), AV(CVBS) Video,  
RS-232C, LAN  
Rated Voltage  
AC 100-240 V~ 50/60 Hz 3.0 A  
Power Consumption  
On Mode : 300 W Typ.  
Sleep Mode : ≤ 1 W (RGB) / 2 W (HDMI/DVI)  
Off Mode : ≤ 0.5 W  
Environmental  
conditions  
Operating Temperature  
Operating Humidity  
5 °C to 35 °C  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20 °C to 60 °C  
5 % to 95 %  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
SPECIFICATIONS  
Dimensions  
(Width x Height x  
Depth) / Weight  
H
W
D
1117 mm x 661 mm x 118.7 mm / 28.54 kg  
H
W
D
1117 mm x 757.8 mm x 302.6 mm / 32.56 kg  
H
W
D
1117 mm x 661.0 mm x 118.7 mm / 29.29 kg  
H
W
D
1117 mm x 757.8 mm x 302.6 mm / 33.3 kg  
* Applicable only for models that support the speakers  
Audio  
RMS Audio Output  
Input Sensitivity  
10 W + 10 W (R + L)  
0.7 Vrms  
Speaker Impedance  
8 Ω  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
SPECIFICATIONS  
DTV Mode  
Resolution  
480i  
RGB (PC) supported mode  
HDMI/DVI  
(DTV)  
Horizontal  
Resolution  
Vertical  
Frequency(kHz) Frequency(Hz)  
x
31.469  
31.468  
31.469  
37.5  
70.8  
70.8  
59.94  
75  
640 x 350  
576i  
x
720 x 400  
480p  
o
640 x 480  
576p  
720p  
o
o
640 x 480  
37.879  
46.875  
49.725  
48.363  
60.123  
44.772  
47.7  
60.317  
75  
800 x 600  
800 x 600  
1080i  
o
o
74.55  
60  
1080p  
832 x 624  
1024 x 768  
1024 x 768  
1280 x 720  
1280 x 768  
1360 x 768  
1366 x 768  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1920 x 1080  
75.029  
59.855  
60  
Power Indicator  
Mode  
47.72  
47.7  
59.799  
60  
Monitor Set  
63.981  
79.98  
65.290  
67.5  
60.02  
75.02  
59.954  
60  
On Mode  
Blue  
Sleep Mode  
Off Mode  
Amber  
-
NOTE  
HDMI/DVI(PC) supported mode  
DTV/PC selection on RGB and HDMI/DVI  
inputs is available for PC resolutions : 640  
x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920 x  
1080 / 60 Hz and DTV resolutions : 480p,  
720p, 1080p.  
y
Horizontal  
Resolution  
Vertical  
Frequency(kHz) Frequency(Hz)  
31.469  
37.879  
48.363  
44.772  
47.7  
59.94  
60.317  
60  
640 x 480  
800 x 600  
1024 x 768  
1280 x 720  
1280 x 768  
1360 x 768  
1366 x 768  
1280 x 1024  
1680 x 1050  
1920 x 1080  
59.855  
60  
47.72  
47.7  
59.799  
60  
63.981  
65.290  
67.5  
60.02  
59.954  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
CONTROLLING THE MULTIPLE PRODUCT  
CONTROLLING THE MULTIPLE PRODUCT  
Use this method to connect several products to a single PC. You can control several products at a  
time by connecting them to a single PC.  
In the Option menu, Set ID must be between 1 and 225 without being duplicated.  
y
y
Connecting the cable  
Connect the RS-232C cable as shown in the picture.  
The RS-232C protocol is used for communication between the PC and product. You can turn the  
product on/off, select an input source or adjust the OSD menu from your PC.  
y
RS-232C Cable  
(not included)  
PC  
Set 1  
Set 2  
Set 3  
Set 4  
RS-232C Configurations  
7-Wire Configurations (Standard RS-232C cable)  
3-Wire Configurations (Not Standard)  
PC  
Set  
PC  
Set  
3
2
5
6
4
7
8
3
2
5
6
4
8
7
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
CTS  
RXD  
TXD  
GND  
DTR  
DSR  
RTS  
CTS  
2
3
5
4
6
7
8
TXD  
RXD  
GND  
DSR  
DTR  
CTS  
RTS  
TXD  
RXD  
GND  
DSR  
DTR  
CTS  
RTS  
2
3
5
4
6
7
8
D-Sub 9  
(Female)  
D-Sub 9  
(Female)  
D-Sub 9  
(Female)  
D-Sub 9  
(Female)  
Communication Parameter  
Baud Rate : 9600 buad Rate (UART)  
Data Length : 8 bit  
Parity Bit : None  
Stop Bit : 1bit  
Flow Control : None  
y
y
y
y
y
y
y
Communication Code : ASCII code  
Use a crossed (reverse) cable  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
CONTROLLING THE MULTIPLE PRODUCT  
Command reference list  
COMMAND  
DATA  
2
1
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
2
a
b
c
d
e
f
1
3
01. Power  
00H to 01H  
02H to 09H  
01H to 09H  
00H to 01H  
00H to 01H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 01H  
00H to 01H  
00H to 64H  
00H to 03H  
FFH  
02. Input Select  
03. Aspect Ratio  
04. Screen Mute  
05. Volume Mute  
06. Volume Control  
07. Contrast  
g
h
i
08. Brightness  
09. Color  
10. Tint  
j
11. Sharpness  
k
l
12. OSD Select  
13. Remote Lock/ key Lock  
14. Balance  
m
t
15. Color Temperature  
16. Abnormal state  
17. ISM mode  
u
z
p
u
c
d
e
f
00H to 10H  
01H  
j
18. Auto configuration  
19. Key  
m
d
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
Key Code  
00H to 55H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 19H  
00H to 01H  
00H to 06H  
00H to 06H  
FFH  
20. Tile Mode  
21. Tile H Position  
22. Tile V Position  
23. Tile H Size  
g
h
i
24. Tile V Size  
25. Tile ID Set  
26. Natural Mode (In Tile mode)  
27. Picture mode(PSM)  
28. Sound mode  
29. Fan Fault check  
30. Elapsed time return  
31. Temperature value  
32. Lamp fault check  
33. Auto Volume  
34. Speaker  
j
x
y
w
l
FFH  
n
p
u
v
f
FFH  
FFH  
00H to 01H  
00H to 01H  
00H to 08H  
35. Sleep Time  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
CONTROLLING THE MULTIPLE PRODUCT  
COMMAND  
DATA  
1
f
2
1
2
3
36. Auto Sleep  
37. Power On Delay  
38. Language  
39. DPM Select  
40. Reset  
g
h
i
00H to 01H  
00H to 64H  
00H to 09H  
00H to 01H  
00H to 02H  
00H to 03H  
00H to 01H  
00H to 64H  
00H to 64H  
00H to 64H  
00H to 64H  
FFH  
f
f
f
j
f
k
l
f
41. Power Saving  
42. Power Indicator  
43. H Position  
44. V Position  
45. H Size  
f
o
f
q
r
f
f
s
t
f
46. V Size  
f
47. Serial no.  
y
z
b
f
48. S/W Version  
49. Input Select  
FFH  
x
20H to A0H  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
CONTROLLING THE MULTIPLE PRODUCT  
Transmission / Receiving protocol  
Transmission  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
* [Command 1]: First command. (k, j, m, d, f, x)  
* [Command 2]: Second command.(a to u)  
* [Set ID]: Set up the Set ID number of product.  
range : 01H to 63H. by setting '0', server can control all products.  
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should not be checked the ack  
message. Because all sets will send the ack message, so it's impossible the check the whole ack messages.  
* [DATA]: To transmit command data.  
Transmit 'FF' data to read status of command.  
* [Cr]: Carriage Return (ASCII code '0 x 0 D')  
* [ ]: ASCII code Space (0 x 20)  
OK Acknowledgement  
[Command2][ ][Set ID][ ][OK][Data][x]  
* The Product transmits ACK (acknowledgement) based on this format when receiving normal data. At this time,  
if the data is data read mode, it indicates present status data. If the data is data write mode, it returns the data of  
the PC computer.  
Error Acknowledgement  
[Command2][ ][Set ID][ ][NG][Data][x]  
* If there is error, it returns NG  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
CONTROLLING THE MULTIPLE PRODUCT  
01. Power (Command: k a)  
04. Screen Mute (Command: k d)  
To control Power On/Off of the set.  
To select screen mute on / off.  
Transmission  
Transmission  
[k][a][ ][Set ID][ ][Data][Cr]  
[k][d][ ][Set ID][ ][Data][Cr]  
Data 0 : Power Off  
Data 1 : Power On  
Data 0 : Screen mute off (Picture on)  
1 : Screen mute on (Picture off)  
Acknowledgement  
Acknowledgement  
[a][ ][Set ID][ ][OK][Data][x]  
To show the status of Power On/Off.  
Transmission  
[d][ ][Set ID][ ][OK][Data][x]  
[k][a][ ][Set ID][ ][FF][Cr]  
Acknowledgement  
[a][ ][Set ID][ ][OK][Data][x]  
Data 0 : Power Off  
9 : DPM  
Data 1 : Power On  
05. Volume Mute (Command: k e)  
To control On/Off of the Volume Mute.  
Transmission  
[k][e][ ][Set ID][ ][Data][Cr]  
02. Input Select (Command: k b) (Main Picture Input)  
To select input source for the Set.  
Data 0 : Volume Mute On (Volume Off)  
1 : Volume Mute Off (Volume On)  
You can also select an input source using the INPUT  
button on the remote control.  
Acknowledgement  
Transmission  
[e][ ][Set ID][ ][OK][Data][x]  
[k][b][ ][Set ID][ ][Data][Cr]  
Data 0 : Volume Mute On (Volume Off)  
1 : Volume Mute Off (Volume On)  
Data 2 : AV  
7 : RGB (PC)  
8 : HDMI (DTV)  
9 : HDMI (PC)  
Acknowledgement  
[b][ ][Set ID][ ][OK][Data][x]  
Data 2 : AV  
7 : RGB (PC)  
8 : HDMI (DTV)  
9 : HDMI (PC)  
06. Volume Control (Command: k f)  
To adjust Volume.  
Transmission  
[k][f][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
03. Aspect Ratio (Command: k c) (Main Picture Input)  
To adjust the screen format.  
You can also adjust the screen format using the ARC  
(Aspect Ratio Control) button on remote control or in  
the Screen menu.  
Acknowledgement  
[f][ ][Set ID][ ][OK][Data][x]  
Data Min : 00H to Max : 64H  
Transmission  
[k][c][ ][Set ID][ ][Data][Cr]  
* Real data mapping  
Data 1 : Normal Screen (4 : 3)  
2 : Wide Screen (16 : 9)  
4 : Zoom1 (AV)  
0
: STEP 0  
:
5 : Zoom2 (AV)  
6 : Original (AV)  
7 :14 : 9 (AV)  
9 : Just Scan(HD DTV),  
1 : 1 (RGB PC, HDMI / DVI PC)  
A : STEP 10  
:
F
: STEP 15  
10 : STEP 16  
:
64 : STEP 100  
Acknowledgement  
[c][ ][Set ID][ ][OK][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
40  
CONTROLLING THE MULTIPLE PRODUCT  
07. Contrast (Command: k g)  
10. Tint (Command: k j)  
To adjust screen contrast.  
To adjust the screen tint.  
You can also adjust the contrast in the Picture menu.  
You can also adjust the tint in the Picture menu.  
Transmission  
Transmission  
[k][g][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
[k][j][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
Acknowledgement  
[g][ ][Set ID][ ][OK][Data][x]  
Acknowledgement  
[j][ ][Set ID][ ][OK][Data][x]  
Data Red : 00H to Green : 64H  
* Tint Real data mapping  
0 : Step 0 to Red  
:
64 : Step 100 to Green  
08. Brightness (Command: k h)  
To adjust screen brightness.  
You can also adjust the brightness in the Picture  
menu.  
Transmission  
11. Sharpness (Command: k k)  
To adjust the screen Sharpness.  
You can also adjust the sharpness in the Picture  
menu.  
[k][h][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
Transmission  
Acknowledgement  
[k][k][ ][Set ID][ ][Data][Cr]  
[h][ ][Set ID][ ][OK][Data][x]  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
Acknowledgement  
[k][ ][Set ID][ ][OK][Data][x]  
Data Min : 00H to Max : 64H  
09. Color (Command: k i) (Video Timing only)  
To adjust the screen color.  
You can also adjust the color in the Picture menu.  
12. OSD Select (Command: k l)  
Transmission  
To control OSD on/off to the set.  
[k][i][ ][Set ID][ ][Data][Cr]  
Transmission  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
[k][l][ ][Set ID][ ][Data][Cr]  
Data 0: OSD Off  
Data 1: OSD On  
Acknowledgement  
Acknowledgement  
[l][ ][Set ID][ ][OK][Data][x]  
Data 0: OSD Off  
[i][ ][Set ID][ ][OK][Data][x]  
Data Min : 00H to Max : 64H  
Data 1: OSD On  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
CONTROLLING THE MULTIPLE PRODUCT  
13. Remote Lock /Key Lock (Command: k m)  
To control Remote Lock on/off to the set.  
This function, when controlling RS-232C, locks the  
remote control and the local keys.  
16. Abnormal state (Command: k z)  
Used to Read the power off status when Stand-by  
mode.  
Transmission  
Transmission  
[k][z][ ][Set ID][ ][Data][Cr]  
[k][m][ ][Set ID][ ][Data][Cr]  
Data FF : Read  
Data 0: Off  
Data 1: On  
0 : Normal (Power on and signal exist)  
1 : No signal (Power on)  
2 : Turn the monitor off by remote control  
3 : Turn the monitor off by sleep time function  
4 : Turn the monitor off by RS-232C function  
8 : Turn the monitor off by off time function  
9 : Turn the monitor off by auto off function  
Acknowledgement  
[m][ ][Set ID][ ][OK][Data][x]  
Data 0: Off  
Data 1: On  
Acknowledgement  
[z][ ][Set ID][ ][OK][Data][x]  
14. Balance (Command: k t)  
To adjust the sound balance.  
Transmission  
[k][t][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
(Hexadecimal code)  
17. ISM mode (Command: j p)  
Used to select the afterimage preventing function.  
Acknowledgement  
Transmission  
[t][ ][Set ID][ ][OK][Data][x]  
Data Min : 00H to Max : 64H  
[j][p][ ][Set ID][ ][Data][Cr]  
Data 1H : Inversion  
2H : Orbiter  
* Balance : L50 to R50  
4H : White Wash  
8H : Normal  
10H : Dot Wash  
Acknowledgement  
[p][ ][Set ID][ ][OK][Data][x]  
15. Color Temperature (Command: k u)  
To adjust the screen color temperature.  
Transmission  
[k][u][ ][Set ID][ ][Data][Cr]  
Data 0 : Medium  
1 : Cool  
18. Auto Configure (Command: j u)  
To adjust picture position and minimize image  
shaking automatically. it works only in RGB(PC)  
mode.  
2 : Warm  
3 : User  
Acknowledgement  
[u][ ][Set ID][ ][OK][Data][x]  
Transmission  
[j][u][ ][Set ID][ ][Data][Cr]  
Data 1 : To set  
Data 0 : Medium  
1 : Cool  
2 : Warm  
3 : User  
Acknowledgement  
[u][ ][Set ID][ ][OK][Data][x]  
* Running the Color Temperature command changes  
the Picture Mode settings to User1.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
CONTROLLING THE MULTIPLE PRODUCT  
19. Key (Command: m c)  
22. Tile V Position (Command: d f)  
To send IR remote key code.  
To set the Vertical position.  
Transmission  
Transmission  
[m][c][ ][Set ID][ ][Data][Cr]  
Acknowledgement  
[d][f][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
Acknowledgement  
[c][ ][Set ID][ ][OK][Data][x]  
[f][ ][Set ID][ ][OK/NG][Data][x]  
20. Tile Mode (Command: d d)  
23. Tile H Size (Command: d g)  
Change a Tile Mode.  
To set the Horizontal size.  
Transmission  
Transmission  
[d][d][ ][Set ID][ ][Data][Cr]  
[d][g][ ][Set ID][ ][Data][x]  
Data Min : 00H to Max : 64H  
Data  
Description  
00 or 11  
12  
Tile mode is off.  
1 x 2 mode (column x row)  
1 x 3 mode  
Acknowledgement  
13  
[g][ ][Set ID][ ][OK/NG][Data][x]  
14  
1 x 4 mode  
...  
...  
55  
5 x 5 mode  
* The data can not be set to 0X or X0 except 00.  
Acknowledgement  
[d][ ][Set ID][ ][OK/NG][Data][x]  
24. Tile V Size (Command: d h)  
To set the Vertical size.  
Transmission  
[d][h][ ][Set ID][ ][Data][x]  
Data Min : 00H to Max : 64H  
Acknowledgement  
21. Tile H Position (Command: d e)  
To set the Horizontal position.  
[h][ ][Set ID][ ][OK/NG][Data][x]  
Transmission  
[d][e][ ][Set ID][ ][Data][Cr]  
Data Min : 00H to Max : 64H  
Acknowledgement  
[e][ ][Set ID][ ][OK/NG][Data][x]  
25. Tile ID Set (Command: d i)  
To assign the Tile ID for Tiling function.  
Transmission  
[d][i][ ][Set ID][ ][Data][x]  
Data Min : 00H to Max : 19H  
(Hexadecimal code)  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
CONTROLLING THE MULTIPLE PRODUCT  
26. Natural Mode (In Tile mode)(Command: d j)  
29. Fan Fault check (Command: d w)  
To assign the Tile Natural mode for Tiling function.  
To check the Fan fault of the Set.  
Transmission  
Transmission  
[d][j][ ][Set ID][ ][Data][x]  
[d][w][ ][Set ID][ ][Data][x]  
Data 0 : Natural Off  
1 : Natural On  
* The data is always FF (in Hex).  
Data ff : Read Status  
ff : Read Status  
Acknowledgement  
Acknowledgement  
[w][ ][Set ID][ ][OK/NG][Data][x]  
[j][ ][Set ID][ ][OK/NG][Data][x]  
* Data is the status value of the Fan fault.  
Data 0 : Fan fault  
1 : Fan Ok  
2 : N/A (Not Avaliable)  
27. Picture Mode (Command: d x)  
To adjust the picture mode.  
Transmission  
[d][x][ ][Set ID][ ][Data][x]  
Data Structure  
30. Elapsed time return (Command: d l)  
Data(Hex)  
Mode  
To read the elapsed time.  
00  
01  
02  
03  
04  
05  
06  
Vivid  
Standard  
Cinema  
Sport  
Transmission  
[d][l][ ][Set ID][ ][Data][x]  
* The data is always FF(in Hex).  
Acknowledgement  
Game  
User1  
User2  
[l][ ][Set ID][ ][OK/NG][Data][x]  
* The data is always FF(in Hex).  
(Hexadecimal code)  
Acknowledgement  
[x][ ][Set ID][ ][OK/NG][Data][x]  
28. Sound Mode (Command: d y)  
31. Temperature value (Command: d n)  
To adjust the Sound mode.  
To read the inside temperature value.  
Transmission  
Transmission  
[d][y][ ][Set ID][ ][Data][x]  
Data Structure  
[d][n][ ][Set ID][ ][Data][x]  
* The data is always FF(in Hex).  
Acknowledgement  
Data(Hex)  
Mode  
00  
01  
02  
03  
04  
05  
06  
Clear Voice  
Standard  
Music  
[n][ ][Set ID][ ][OK/NG][Data][x]  
* The data is 1 byte long in Hexadecimal.  
Cinema  
sport  
Game  
User  
Acknowledgement  
[y][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
CONTROLLING THE MULTIPLE PRODUCT  
32. Lamp fault Check (Command: d p)  
35. Sleep Time (Command: f f)  
To check lamp fault.  
Set Sleep Time.  
Transmission  
Transmission  
[d][p][ ][Set ID][ ][Data][x]  
* The data is always FF(in Hex).  
Acknowledgement  
[f][f][ ][Set ID][ ][Data][Cr]  
Data 00 : Off  
01 : 10  
02 : 20  
03 : 30  
04 : 60  
05 : 90  
06 : 120  
07 : 180  
08 : 240  
(Orderly)  
[p][ ][Set ID][ ][OK/NG][Data][x]  
* The data is 1 byte long in Hexadecimal.  
Data 0 : Lamp Fault  
1 : Lamp Ok  
Acknowledgement  
[f][ ][Set ID][ ][OK/NG][Data][x]  
33. Auto volume (Command: d u)  
Automatically adjust the volume level.  
Transmission  
[d][u][ ][Set ID][ ][Data][x]  
36. Auto Sleep (Command: f g)  
Data 0: Off  
Data 1: On  
Set Auto Sleep.  
Acknowledgement  
Transmission  
[u][ ][Set ID][ ][OK/NG][Data][x]  
[f][g][ ][Set ID][ ][Data][Cr]  
Data 0: Off  
Data 1: On  
Acknowledgement  
[g][ ][Set ID][ ][OK/NG][Data][x]  
34. Speaker (Command: d v)  
Turn the speaker on or off.  
Transmission  
[d][v][ ][Set ID][ ][Data][x]  
37. Power On Delay (Command: f h)  
Set the schedule delay when the power is turned on  
(Unit: second).  
Data 0: Off  
Data 1: On  
Acknowledgement  
[v][ ][Set ID][ ][OK/NG][Data][x]  
Transmission  
[f][h][ ][Set ID][ ][Data][Cr]  
Data : 00H to 64H (Data value)  
Acknowledgement  
[h][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
CONTROLLING THE MULTIPLE PRODUCT  
38. Language (Command: f i)  
41. Power saving (Command: f l)  
Set the OSD language.  
To set the Power saving mode.  
Transmission  
Transmission  
[f][i][ ][Set ID][ ][Data][Cr]  
[f][l][ ][Set ID][ ][Data][Cr]  
Data 0 : English  
1 : French  
Data 0 : Off  
1 : static level 1  
2 : static level 2  
3 : static level 3  
2 : German  
3 : Spanish  
4 : Italian  
Acknowledgement  
5 : Portuguese  
6 : Chinese  
7 : Japanese  
8 : Korean  
[l][ ][Set ID][ ][OK/NG][Data][x]  
9 : Russian  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
42. Power Indicator (Command: f o)  
To set the LED for Power Indicator  
Transmission  
[f][o][ ][Set ID][ ][Data][Cr]  
Data 00 : Off  
01 : On  
Acknowledgement  
[o][ ][Set ID][ ][OK/NG][Data][x]  
39. DPM Select (Command: f j)  
Set the DPM (Display Power Management) function.  
Transmission  
[f][j][ ][Set ID][ ][Data][Cr]  
Data 0 : Off  
1 : On  
43. H Position (Command : f q)  
To set the Horizontal position  
Acknowledgement  
Transmission  
[j][ ][Set ID][ ][OK/NG][Data][x]  
[f][q][ ][Set ID][ ][Data][Cr]  
Data : 00H to 64H  
Acknowledgement  
[q][ ][Set ID][ ][OK/NG][Data][x]  
40. Reset (Command: f k)  
Set the DPM (Display Power Management) function.  
44. V Position (Command : f r)  
To set the Vertical positionTransmission  
Transmission  
[f][r][ ][Set ID][ ][Data][Cr]  
[f][k][ ][Set ID][ ][Data][Cr]  
Data : 00H to 64H  
Data 0 : Picture Reset  
1 : Screen Reset  
2 : Factory Reset  
Acknowledgement  
Acknowledgement  
[r][ ][Set ID][ ][OK/NG][Data][x]  
[k][ ][Set ID][ ][OK/NG][Data][x]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
CONTROLLING THE MULTIPLE PRODUCT  
45. H Size (Command : f s)  
47. Serial no. (Command: f y)  
To set the Horizontal size.  
Check the Serial no.  
Transmission  
Transmission  
[f][s][ ][Set ID][ ][Data][Cr]  
[f][y][ ][Set ID][ ][Data][Cr]  
Data : 00H to 64H  
Data FF (to read the serial numbers)  
Acknowledgement  
Acknowledgement  
[y][ ][Set ID][ ][OK/NG][Data1] to [Data13][x]  
* The data format is ASCII Code.  
[s][ ][Set ID][ ][OK/NG][Data][x]  
* H Size Real Data Mapping  
[Data1]  
0x00: Step 0  
0x0A: Step 10  
0x14: Step 20  
0x1E: Step 30  
0x28: Step 40  
0x32: Step 50  
0x3C: Step 60  
0x46: Step 70  
0x50: Step 80  
0x5A: Step 90  
0x64: Step 100  
48. S/W Version (Command: f z)  
Check the software version.  
Transmission  
[f][z][ ][Set ID][ ][Data][Cr]  
Data FF : Read  
Acknowledgement  
[z][ ][Set ID][ ][OK/NG][Data][x]  
46. V Size (Command : f t)  
To set the Vertical size  
Transmission  
49. Input Select (Command: x b)  
[f][t][ ][Set ID][ ][Data][Cr]  
To select input source for the Set.  
Data : 00H to 64H  
Transmission  
[x][b][ ][Set ID][ ][Data][Cr]  
Acknowledgement  
Data 20H : AV  
[t][ ][Set ID][ ][OK/NG][Data][x]  
60H : RGB (PC)  
90H : HDMI/DVI (DTV)  
A0H : HDMI/DVI (PC)  
* V Size Real Data Mapping  
[Data1]  
0x00: Step 0  
Acknowledgement  
[b][ ][Set ID][ ][OK/NG][Data][x]  
0x0A: Step 10  
0x14: Step 20  
0x1E: Step 30  
0x28: Step 40  
0x32: Step 50  
0x3C: Step 60  
0x46: Step 70  
0x50: Step 80  
0x5A: Step 90  
0x64: Step 100  
Data 20H : AV  
60H : RGB (PC)  
90H : HDMI/DVI (DTV)  
A0H : HDMI/DVI (PC)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL CONTROL DEVICE SETUP 47  
IR CODES  
Code(Hex) Function  
Note  
00  
01  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button (Power On / Off)  
Discrete IR Code (Only Power On)  
Discrete IR Code (Only Power Off)  
R/C Button  
02  
03  
08  
C4  
C5  
09  
98  
0B  
0E  
43  
5B  
6E  
44  
10  
11  
VOL( )  
VOL( )  
POWER ON/OFF  
POWER ON  
POWER OFF  
MUTE  
AV  
INPUT  
R/C Button  
R/C Button  
R/C Button  
SLEEP  
MENU  
R/C Button  
EXIT  
R/C Button  
PSM  
R/C Button  
SET  
R/C Button  
Number Key 0  
Number Key 1  
Number Key 2  
Number Key 3  
Number Key 4  
Number Key 5  
Number Key 6  
Number Key 7  
Number Key 8  
Number Key 9  
AV  
R/C Button  
R/C Button  
12  
13  
14  
15  
16  
17  
18  
19  
5A  
D5  
C6  
79  
76  
77  
AF  
99  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
R/C Button  
Discrete IR Code(Input AV Selection)  
Discrete IR Code(Input RGB PC Selection)  
Discrete IR Code(Input HDMI/DVI Selection)  
R/C Button  
RGB PC  
HDMI/DVI  
ARC  
ARC (4 : 3)  
ARC (16 : 9)  
ARC (ZOOM)  
AUTO CONFIG  
Discrete IR Code(Only 4 : 3 mode)  
Discrete IR Code(Only 16 : 9 mode)  
Discrete IR Code(Only ZOOM1, ZOOM2 mode)  
Discrete IR Code  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Make sure to read the Safety Precautions  
before using the product.  
Keep the Owner's Manual(CD) in an accessible  
place for future reference.  
The model and serial number of the SET is  
located on the back and one side of the SET.  
Record it below should you ever need service.  
Temporary noise is normal when powering ON or  
OFF this device.  
MODEL  
SERIAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

LG Electronics Air Conditioner W091CA User Manual
Life Fitness Home Gym Adjustable Decline Bench User Manual
Life Fitness Home Gym G5 FIT 10 CM User Manual
Lindy Computer Drive 42937 User Manual
Little Wonder Blower 2 1 1960 User Manual
LST Smoke Alarm B524IEFT 1 User Manual
Maytag Dishwasher MDB7809AWB2 User Manual
Melissa Hair Dryer 235 028 User Manual
Memorex DVD VCR Combo MVD4540C User Manual
Metra Electronics Car Stereo System GMOS 04 User Manual