The Faroudja
LD100/LD100U Line Doubler
Installation & Operation
Instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
TORY
Some Video History and the Faroudja Approach
Faroudja Laboratories, located in northern Califor-
nia’s Silicon Valley, was founded in 1971 by Yves
and Isabell Faroudja to develop state-of-the-art of
video processing technology. Over the last 20
years, Faroudja Laboratories and its companion
R&D center, Faroudja Research, have indeed devel-
oped hundreds of advanced electronic processes
to improve video enhancement, noise reduction
and NTSC encoding/ decoding technologies. Many
of these processes are used under license by
the world’s leading electronics companies in a
wide range of high performance video products.
Faroudja professional video equipment is also
currently hard at work in hundreds of television
studios. Thus Faroudja technology is utilized and
enjoyed in millions of American homes every day.
nologies utilized in this extraordinary device and an
explanation of the visual improvements it provides
in home video playback systems.
First, before we discuss the LD100, let’s take a
quick look at the history of the current television
standard. Today’s 525 line TV picture standard was
actually developed in the 1940’s when broadcasts
were only in black and white. Keep in mind that
back then, the transistor had not yet been invented!
In 1953, the National Television Systems Committee
(NTSC) adopted what is still the present method of
color TV broadcasting. It was designed to be fully
compatible with the older technology of black and
white transmission. Unfortunately, this need to main-
tain compatibility with old technology led to
unavoidable compromises in NTSC picture quality.
Yves Faroudja has devoted his career and his com-
pany to the goal of enabling home video systems to
achieve the image quality of 35mm motion pictures.
In pursuit of this goal, Faroudja Labs has made use
of techniques from Faroudja professional video
equipment and incorporated these in the LD100
and LD100U line doublers.
Today, thanks to the advent of new thinking and
new technologies realized by industry pioneer Yves
Faroudja, these compromises can be nearly
eliminated. Faroudja’s unique approach focuses
on critical problem areas in the NTSC and PAL
broadcast format. With patented engineering and
design work, Yves and Faroudja Laboratories have
created an exceptional product that brings new lev-
els of visual reality to the enjoyment of discerning
video enthusiasts around the world.
This booklet will provide the reader with a hands-
on look at the LD100, its operation and benefits.
Also supplied is an overview of the proprietary tech-
2
Download from Www.Somanuals.com. All Manuals Search And Download.
LICENSEES AND AWARDS
1987: SMPTE
Licensees Around the World
DAVID SARNOFF GOLD MEDAL AWARD
Faroudja’s inventive approach to improving the qual-
ity of video imaging has caught the eye of some of
the world’s greatest high technology companies.
The following list represents those that have recog-
nized the value of Faroudja’s solutions to imaging
problems and pay for the opportunity to incorporate
this technology in their advanced video products (as
of December 1993):
for
“Contributing in Optimizing NTSC Performances”
1988: MONITOR AWARD
for
“Excellence in Engineering
NTSC Encoders and Decoders”
Canon
Conrac
General Instrument
Grass Valley
Hitachi
Microtime
Mitsubishi
NAC
NEC
Sanyo
Sharp
1989: BM/E AWARD
for
“Excellence in Engineering”
Ikegami
1991: Technology Executive of the Year
from Cable TV Business
JVC
Sony
Toshiba
Matsushita (Panasonic)
1991: EMMY
from The National Academy
of Television Arts and Sciences
for
Awards and Achievements
In just the last four years, Yves Faroudja and
Faroudja Labs have garnered worldwide recognition
and a number of industry awards. These honors are
notable for several reasons. They are in response to
the significant impact that Faroudja’s technology has
made on the serious improvement of video quality.
They are also a reflection of his long term dedication
to continually improving and optimizing the perfor-
mance of the NTSC video format.
“Techniques for Minimization of NTSC Artifacts
Through Advanced Encoding Techniques”
1992: VIDEO GRAND PRIX AWARD
Audio/Video International
LD100 Line Doubler “Advanced Technology Award”
In chronological order, these awards and their spe-
cific focus are listed including an EMMY in 1991 for
minimizing artifacts in the NTSC broadcast encod-
ing process.
1993: VIDEO MAGAZINE
Video Visionary
LD100 Line Doubler “10 Best Products”
3
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM DESCRIPTION
The Faroudja System LD100 digital scan converter
is a precision video instrument used to convert
NTSC Composite, Y/C, or 525 line RGB or
Component interlaced signals into 525 line progres-
sive outputs. Using the LD100 digital scan converter
will produce pictures with more details, remove
unwanted picture artifacts and, when used with pro-
jection systems, produce pictures of exceptional
quality, giving a “cinema-like” feeling.
position if the input loop is not used. The Y/C input
uses a standard 4 pin S-VHS connector. This input
is not available for a looped operation and is termi-
nated internally. The RGB and Component inputs
use BNC connectors. As with the video input, these
inputs are loopable to other devices. Selectable 75
Ohm terminations are provided. If the looped inputs
are used, these cables should be kept short, (under
6' in length) or a video distribution amplifier should
be used. This allows the LD100 to keep the highest
signal bandwidth possible without having the high
frequency being attenuated in a long cable.
Front panel features include Power, Input Select
(Video, Y/C, RGB and Component), Brightness,
Contrast, Color, Auto-Tint, Noise Reduction, Detail,
AGC and Freeze. Input switch settings are memo-
rized when the power is removed from the unit. This
allows the LD100 to be interfaced into a system
without the need to select the input when the sys-
tem is powered up. During power up, the AGC
switch is selected in the On mode with the Freeze
switch selected OFF. The remaining controls may be
left in factory preset or manually set by pulling out
and rotating the control until the desired level is
established.
Output from the LD100 is provided on six BNC con-
nectors as well as one 15 pin ‘D’ VGA connector.
The BNC outputs provided are Red, Green, Blue,
Horizontal Sync, Vertical Sync and Composite Sync.
Interface to monitors/projectors can be of a 4 or 5
wire connection. Note: 4 wire, meaning Red, Green,
Blue and Composite Sync or 5 wire, meaning Red,
Green, Blue, Horizontal Sync and Vertical Sync.
There is no sync present on the Green output. The
LD100 is capable of driving a monitor/projector
using the BNC outputs as well as a VGA monitor
using the 15 pin ‘D’ connector, at the same time.
Inputs to the LD100 include: Composite Video, Y/C
(S-VHS), RGB and Component (Y,R-Y,B-Y). The
Video input may be connected by either a BNC con-
nection or a video RCA type connection. These
inputs are looped internally so that the signal may
be used by other devices. A selectable 75 Ohm ter-
minator switch is provided and should be in the ON
The LD100 features a remote control interface that
will allow control of all line doubler functions. The
remote control uses a 25 pin female ‘D’ connector
located on the rear panel. See appendix A for fur-
ther information.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM DESCRIPTION
Circuit Description
When using the RGB or Component inputs, Sync is
derived from the G or Y input signals unless sync is
provided to the Composite Sync input. The
Composite Sync input will override the sync from
the G or Y inputs. The sync signal then feeds the
LD100 systems clock generator and is used as a
reference to generate Horizontal Sync, Vertical
Sync, Composite Sync.
Figure 1 is a block diagram of the LD100 showing
signal flow and the location of front panel controls
and switches. Composite Video and Y/C (S-VHS)
inputs are connected to the units decoder with AGC
control and converted to Y, R-Y and B-Y signals.
The Y, (Luminance) output from the decoder enters
the input switcher while the R-Y and B-Y signal
enter the Chroma Enhancement block where the
Tint phase can be adjusted when selected in the
manual mode. The RGB input signals are trans-
coded to Y, R-Y, and B-Y signals and fed to the
input switcher. Component signals are fed directly
to the input switcher.
Inventory List
1 LD100 Digital Scan Converter
1 Installation/Operation Manual
1 Warranty Card
1 Power Cord
The input switcher then selects the correct function
and outputs the Y signal to the Luminance Line
Doubler block. The Luminance Line Doubler block
contains the Brightness, Contrast and Freeze con-
trols while the R-Y and B-Y signals enter the
Chroma Line Doubling block where the color level
can be controlled along with the Freeze controls.
The Line Doubled Luminance signal now enters the
Luminance Detail and Noise Reduction block where
the functions of Noise Reduction and Detail Level
are controlled.
2 Rack Mount Ears
1 Rack Mount Screw Kit
Caution Notes
Do not connect the LD100 to a Monitor/
Projector not capable of the correct scan
rates. (31.5KHz)
The Luminance signal from the Luminance Detail
and Noise Reduction block along with the R-Y and
B-Y signals from the Chroma Line Doubling block
feed the output transcoder and are converted to
RGB signals. These RGB signals are buffered and
then sent to the rear panel outputs to both the BNC
and VGA interface connectors.
High Voltages are present inside. Opening
the unit will void all warranties.
No user serviceable parts inside.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
TECHNICAL HIGHLIGHTS
LD100 TECHNICAL HIGHLIGHTS – The LD100 is far more than simply a “line doubler”. It is a truly unique product in the
world of high performance video. The LD100 is actually a complex image processor that consists of three distinct
components – all utilizing patented Faroudja technologies and engineered into one chassis; the SuperNTSC
decoder , the Faroudja proprietary line doubler, and Faroudja’s innovative bandwidth expansion circuit that
allows for the sharpening of image details. Line doubling by itself is simple and inexpensive to achieve. But simply
doubling the lines of information is worse than doing nothing at all because the visual result is a picture of lesser quality. To
achieve film-like quality, a great deal more is required than just doubling the lines. The block diagram below provides a sim-
ple view of Faroudja’s multi-faceted solution for perfect pictures. The technical and visual benefits of each of these special
circuits are explained more fully below.
SECTION A – The LD100 SuperNTSC Decoder: Elimi-
nates COLOR BLURRING – The engineers of the 1940’s
(and the 1950’s, before and during the development of
color broadcasting), had no idea that video images would
one day be blown up as large as they are today. They
therefore designed the color section of the NTSC standard
with severe bandwidth restrictions. This causes colors in
various video images to “blur” and “smear”. These effects
are further aggravated by storage media, such as VHS
tapes, that further degrade the chroma or color signal. e.g.
– note how deep reds smear on VHS tape images.
DOT CRAWL and HANGING DOTS – This phenomena is
easily seen with large, highly colored, stationary graphics
like titles and credits. Dot crawl is a rapid upwards move-
ment of colored dots on sharp vertical transitions. Hanging
dots lie underneath all the colored horizontal transitions.
Both of these color aberrations are artifacts that appear
due to an imperfect color decoding process. The LD100
has two separate and patented correction circuits that
work to eliminate both of these distortions. The impact is
color transitions that are clear, sharp and natural.
SECTION B – THE LD100 Patented Line Doubler: elimi-
nates VISIBLE SCAN LINES – The secret of the LD100’s
uncanny ability to double the lines of information without
adding digital artifacts is in its unique ability to detect
motion and interpolate correctly to “fill in the blank lines”.
The Faroudja LD100 does this better than any other line
doubler thanks to its proprietary, patented circuitry. It is
the only line doubler in existence that can detect the dif-
ference between a film image that has been transferred to
video or video image that emanates from a video camera.
After detecting the image type, the LD100 adjusts its
algorithm to compensate accordingly.
The Faroudja LD100 utilizes proprietary circuitry to recre-
ate and further correct color details. Technically, this is
accomplished by making use of the sharper black and
white transitions to develop a correction signal that is then
used to sharpen the color transitions. The result is colors
that are restored with sharp details and video images that
retain their original crisp look.
RAINBOW PATTERNS – When you notice the fine detail
of a striped referees shirt rippling with colored rainbows as
the camera pans by, you’ve seen video cross-color inter-
ference.
This is critical because today’s home theaters are primarily
used to show films that were transferred to video whether
on tape, laserdisc or off the air (virtually all prime time pro-
grams are film transferred to video). The inability of other
line doublers to detect motion correctly is what causes
most of them to be unwatchable due to digital artifacts.
The LD100 offers sharper, uniquely clean, artifact-free
film-like images without visible scanning lines.
This annoying artifact is caused by imperfect separation of
the color (chroma), and black and white (luminance) sig-
nals by the color decoder circuitry. Simple techniques
used commonly to separate the two signals can be effec-
tive most of the time, but occasionally are fooled by finer
pitch detail areas like the referees shirt. The decoder in
the LD100 has patented digital adaptive comb filter cir-
cuitry that eliminates decoding errors of this type and
enables the reproduction of sharper, cleaner color images.
Historically speaking again, electrical engineers back in
the 1940’s knew the resolution of a picture tube depends
6
Download from Www.Somanuals.com. All Manuals Search And Download.
on two different mechanisms. Horizontal resolution is a
function of bandwidth (frequency response) of the circuitry
while vertical resolution is a function of the scanning fre-
quency (the number of scan lines in each picture). Given
these mechanisms and the average size picture tube
being 8-10”, they designed the 525 line broadcast stan-
dard so that viewers would not see the scan lines when
watching TV. They had no idea that someday people
would be projecting home theater video images with diag-
onal screen sizes of 10’ and more.
sources. The resultant picture is free of scan lines but dull,
with a serious loss of definition. The solution is to expand
the high frequencies without producing annoying and pic-
ture degrading artifacts.
The bandwith expansion circuitry in the LD100 is excep-
tionally sophisticated, using Faroudja’s double differentia-
tion techniques to sharpen the edges of both horizontal
and vertical details. The result is a sharply detailed line
doubled image that appears crisp and three dimensional
with no visible negative side-effects. This process can
effectively double the bandwidth and therefore the resolu-
tion of the incoming signal.
Based on those NTSC parameters, using a 10 ft. diagonal
screen, would require the viewer to be located more than
45 ft. from the screen to see the picture as it was intend-
ed, without scan lines! Unfortunately, today’s large screen
installations have scan lines that are quite visible, espe-
cially with some of the latest high resolution monitors and
projection televisions. The LD100 eliminates this problem
by scan doubling, or digitally doubling the 525 lines to
become 1050 lines. The result is the elimination of visible
scan lines. The image produced by the LD100 is clearer,
continuous and virtually film-like.
FAROUDJA LD100 APPLICATIONS – While the techni-
cal accomplishments of the LD100 represent years of
intense research and development, its use is straightfor-
ward and direct. The block diagram (above), illustrates a
typical home theater system configuration and shows how
the LD100 would be inserted in the signal path. Many
entertainment sources benefit greatly by the LD100’s
unique attributes; laserdisc, VHS video, S-VHS video,
cable TV, broadcast TV, etc. The LD100 has proven to be
an invaluable tool in other presentation disciplines where
image quality is important – computer data displays, pro-
fessional installations in boardrooms and media rooms,
military installations, government agencies and academic
uses in schools and colleges. From the quality of its indi-
vidual parts to its state-of-the-art patented circuitry, the
LD100 is truly in a class by itself. There is simply no finer
video processor available . . . at any price!
SECTION C – The LD100 Bandwidth Expansion Circuitry:
SHARPENING OF THE IMAGE DETAILS – There is a
major limitation with most contemporary NTSC program
sources — lack of frequency response. The best video
sources such as satellite dish reception and laserdiscs
can provide acceptable resolution (400 plus lines of hori-
zontal resolution). Other more common sources however,
such as VHS tapes (230 lines), are clearly deficient. The
problem is compounded when one doubles the scan lines
and performs other signal processing. The lack of high
frequency detail becomes very obvious with almost all
NOTE: The LD100 (NTSC only version) operates properly
with 50Hz 625 line component or RGB sources.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION INSTRUCTIONS
Figure 2
Figure 3
Unpacking
to allow for proper cooling. It is also recommended
that the rack be forced air cooled.
Remove the LD100/LD100U from the shipping
container and examine it for any signs of shipping
damage or missing items, (check inventory list on
page 5).
Rear Panel I/O
11. Video Termination Switch – Select ON when
not looping the Video signal to other video
devices, (75 Ohm).
All shipping materials should be saved if the unit
is to be moved or should need to be returned for
service or repair.
12. Video Input (BNC) – Composite Video Input
13. Video Input (RCA) – Composite Video Input
Installation
14. Video Input (BNC) – Composite Video Input
The LD100/LD100U is designed to be placed on the
table or rack mounted. If the rack mounting installa-
tion kit is to be used, the rack mount ears are
installed by removing the 4 screws retaining the
wood side panels and installing the rack mount ears
using the 3 screws as shown in Figure 2. Remove
the four feet from the unit. When installing the
LD100 in a rack, it will be necessary to support the
LD100/LD100U by using rack support rails supplied
by the rack manufacturer.
Loop
15. Y/C Input (4 Pin) – Y/C, input internally termi-
nated.
16. R/R-Y Termination Switch – Select ON when
not looping the R/V signal to other video
devices, (75 Ohm).
17. R/R-Y Input Loop (BNC) – Red/R-Y Input
18. R/R-Y Input (BNC) – Red/R-Y Input
19. G/Y Termination Switch – Select ON when
not looping the G/Y signal to other video
devices, (75 Ohm).
Do not support the LD100/LD100U by the rack
mount ears alone!
Ventilation
10. G/Y Input Loop (BNC) – Green/Y Input
The LD100/LD100U will require that air flows freely
in both the bottom and top vent holes. Blocking
these holes will greatly reduce the reliability of the
unit and lead to the possibility of overheating.
11. G/Y Input (BNC) – Green/Y Input
12. B/B-Y Termination Switch – Select ON when
not looping the B/B-Y signal to other video
devices, (75 Ohm).
When the LD100/LD100U is rack mounted, a mini-
mum of 1.25" (1 rack unit height) of free space is to
be provided for both the top and bottom of the unit
13. B/B-Y Input Loop (BNC) – Blue/B-Y Input
14. B/B-Y Input (BNC) – Blue/B-Y Input
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 4
15. Sync Termination Switch – Select ON when
15. not looping the Composite Sync signal to
other video devices, (75 Ohm).
Interface
Figure 4 diagrams the installation of the LD100
using inputs from:
16. Sync Input Loop (BNC) – Composite Sync
1. A composite source such as a Laser Disk Player,
VCR or TV Receiver.
Input Loop
17. Sync Input (BNC) – Composite Sync Input
18. Red Output (BNC) – Red Output 714mV
19. Green Output (BNC) – Green Output 714mV
20. Blue Output (BNC) – Blue Output 714mV
2. A Y/C input such as a S-VHS VCR.
3. An RGB input with sync on green or a
Component input such as a Camera or Beta-SP
recorder with sync on Y. If sync on green or sync
on Y is not available then Sync can be interfaced
using the Composite sync input.
21. Horiz. Sync Output (BNC) – Horizontal Sync
Output –4Vp-p, 31.5KHz/31.2KHz
All input with the exception of the Y/C input have
selectable 75 Ohm input termination switches.
These switches are to be in the ON position unless
the LD100 is being used in a looped configuration.
Termination is then located at the last unit in the
loop only.
22. Vert. Sync Output (BNC) – Vertical Sync
Output –4Vp-p, 59.49Hz/50Hz
23. Sync Output (BNC) – Composite Sync
Output –4Vp-p
24. VGA Interface Output – VGA Standard using
Positive TTL Sync Levels. See appendix B for
pinout information.
Note: The diagram shows a 5 wire connection to
the monitor/projector, i.e. Red, Green, Blue,
Horizontal Sync and Vertical Sync. For monitors/
projectors with a 4 wire input, use Red, Green, Blue
and Composite Sync outputs.
25. Remote Control Interface – See appendix A
for interface diagrams.
26. Power Input – 100-250 VAC, 50/60Hz, 60W
The monitor/projector will be terminated at 75 Ohm
either internally or by switches located on the moni-
tor/projector.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LINE DOUBLER OPERATING INSTRUCTIONS
For reasons of clarity, this technical overview has been written specifically for the LD100. This description
applies as well to the LD100U, with the following exceptions:
1. The LD100U accepts PAL and NTSC signals and switches automatically to the proper standard.
2. Tint control is not operational with PAL sources.
1
2
3
4
5
6
7
8
9
10
11
12 13
The LD100 Control panel
4) use of this input is computers (running at 15.75
kHz). Press to select the RGB video input.
Selecting a push button control lights the adjacent
LED to indicate activation or selection of that partic-
ular function.
5) Component Input – Component Inputs are
more commonly used in the broadcast studio or
post-production environment. The video signal
in its component form (Y, R-Y, B-Y) is carried in
a 3-wire cable with BNC type connectors (e.g.
MII™, D1, Betacam™, Betacam SP™, etc.).
Press to select the Component video input.
1) Power ON/OFF – Press the button and the LED
lights green to indicate POWER ON. When the
LD100 powers up it is automatically set to oper-
ate just as it was when it was last turned off. The
Detail Enhancement circuits are automatically
engaged at turn on.
PICTURE CONTROLS (4)
1) Power ON/OFF - OFF – Another push on the
switch and the power is cut off extinguishing the
green LED. The Freeze Circuit is automatically
disengaged, if in use, upon turn off.
The four rotary-style picture controls, BRIGHT-
NESS, CONTRAST, COLOR and TINT, are factory
preset when pushed in. When pulled out they
become active for manual adjustment. Pushing the
knob back in after manual adjustment gives you the
opportunity to compare your setting to the factory
preset(s).
INPUT SELECTION SWITCHES (4)
2) Video – refers to any composite NTSC video
input - (e.g. VCR’s, laserdisc players, cable
boxes, etc.) Press to select the Video input.
The rotary control format allows for a high degree of
tactile feedback when one is adjusting the picture
functions. Additionally, these controls provide a
wider range of adjustment than those typically found
on monitors and televisions.
3) Y/C – Y/C refers to any Super-VHS (S-VHS or
Hi-8) inputs - (e.g. laserdisc players, S-VHS or
Hi-8 video tape recorders, satellite receivers, etc.)
Press to select the Y/C input. Using the Y/C input
on the LD100 allows one to realize all the benefits
of maintaining the separation of the luminance
(picture) and chrominance (color) signal through
the video signal processing chain, thus avoiding
rainbow patterns due to cross color interference.
In addition, automatic chroma level and phase con-
trols (ACC and APC) are provided. As a conse-
quence, all source-to-source variations in chroma
phase and level are corrected.
When the signal is fed to a monitor through the RGB
inputs the monitor color and tint controls are
typically bypassed. Incorporating the LD100 in such
a system, with its broad range controls, restores
and enhances this control flexibility.
4) RGB – RGB refers to the incoming video signal
being broken down to the individual red, green
and blue format more typically found in the pro-
fessional and broadcast area. The most common
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Every LD100 is subjected to an intense battery of QC and environmental tests. Then
each unit is re-tested and re-calibrated for optimum performance. The component
parts used in the LD100 are the finest available, ensuring long term consistent per-
formance and reliability. This unique, quality oriented “Faroudja touch” can also
be seen in the design of many of the LD100’s controls and features.
6) Brightness Level – Known as “Set-up” in the
broadcast industry, the BRIGHTNESS control is
used to set up the background black level. Pull
the knob out and turn fully counter clockwise
until the picture goes dark. Then rotate the con-
trol clockwise until the black areas in the picture
just begin to go gray. Turn the control back
counter clockwise until the gray just goes to
black. This is the optimum setting.
IMAGE SHARPNESS CONTROLS (2)
The two rotary-style Image Sharpness controls,
NOISE REDUCTION and DETAIL LEVEL, work
together to sharpen edge transitions for a “punchi-
er” picture. The proprietary bandwith expansion cir-
cuitry contained in the LD100 is critical to its spec-
tacular performance. Typical line doublers produce a
flat, soft picture. The LD100’s Image Sharpness cir-
cuitry improves the sharp line and edge transitions
making for clearer, more vivid video images. This is
accomplished with the two controls working in tan-
dem, without adding video noise or digital artifacts
which could otherwise degrade the picture.
7) Contrast Level – As the BRIGHTNESS control
sets the background black level, the CONTRAST
control sets the foreground white level. First set
the BRIGHTNESS level as above, then pull out
and rotate the CONTRAST level clockwise, start-
ing at the full counter clockwise position, until the
white areas of the picture are clearly obvious.
10) Noise Reduction – After setting the detail level
(11), the noise reduction control is then used to
remove any residual noise that may be added
during the Image Sharpness process.
8) Color level – With the Color control pressed in,
the LD100 uses its internal AGC, (Automatic
Gain Control) to set the color level. Pull the knob
out and starting from the full counter-clockwise
position, rotate clockwise for increased color sat-
uration. This is a subjective setting, there is no
right or wrong. Simply adjust for the most pleas-
ing color level.
11) Detail Level – To set the detail level start full
counter clockwise and add detail until the edge
transitions just begin to sharpen.
12) Digital Filter – The Digital Filter eliminates
compression artifacts generated by video
sources transmitted via a digital compressed
path and should not be used with conventional
video sources.
9) Tint – Also known as “Hue” or “Phase”, pull the
knob out to adjust to your personal taste, partic-
ularly in flesh tones. Adjusting the tint control
shifts the picture towards the green or red areas
of the color spectrum. Tint is only active in the
video or Y/C input modes. With the control
pressed in, the LD100 is in the Auto-Tint mode.
The Auto-Tint mode is achieved by using internal
phase comparison techniques to automatically
display colors as intended.
13) Freeze On/Off – Press to capture the current
picture displayed on the screen. Press again to
return to normal, active video. The freeze mode
digitally captures the incoming video signal and
holds it for critical viewing and adjustment. This
feature allows you to optimize the LD100 pic-
ture controls on a still, constant image of your
choosing.
MII is a registered trademark of Panasonic. Betacam and Betacam SP are registered trademarks of Sony.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Problem
Solution
No power light
Unit not turned on
Unit not plugged in
Fuse blown
No power at plug
No picture
Video source not selected
No video source connected or operating
Projector/Monitor not turned on
Projector/Monitor not connected correctly
Bad video cable
Unit in freeze mode
Check brightness and contrast levels
Colors bleeding
Check LD100 termination
Check projector/monitor termination
Contrast set too high
Color set too high
Picture not stable
Check interface cables
Sync cables are swapped or not connected
Input source not selected correctly
Check input terminations
Set Sync to STD.
Projector Fast/Slow Horizontal time constant. Should be set to fast.
Incorrect colors
Tint in manual mode
Defective output cable
RGB cables are swapped
Check projector/monitor termination
Input source not selected correctly
No burst on input
RGB or Y,R-Y, B-Y Inputs not terminated.
Picture washed out
Composite input not terminated
NOTE: To make sure that an input source is not the cause of a problem for a composite source, turn the ter-
mination switch off and connect a composite monitor to the composite input Loop input. For a R,G,B input
source, turn the three termination switches off and connect a R,G,B monitor to the R,G,B input Loop input.
To make sure that a projector is not the cause of a problem, connect a VGA monitor to the 15pin VGA output
connector and check the display to see if it is correct and if the projector is the problem. If the monitor display
shows the same problem as the projector display, then the line doubler has a problem and you should contact
our Technical Support Department.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
LD100/LD100U Remote Control Operation
CABLE SPECIFICATION: Computer Interface
Overview
Remote control of the LD100 / LD100U Line
Doubler is provided by an RS-232 serial interface
connector located on the rear panel of the unit. A
external controller such as a computer or integrated
system controller with an RS-232 interface may be
used to control all user accessible functions of the
Line Doubler.
LD100/LD100U
Line Doubler
DATA TERMINAL or
IBM PC
DB25 (FEMALE)
20 TxD
DB25 (MALE)
RxD 2
TxD 3
30 RxD
GROUND 7
70 GROUND
40 RTS
RS-232 controllable functions include: Video, Y/C
(S-VHS), RGB, Component (YUV), Brightness,
Contrast, Color, Tint, Noise Reduction, Detail Level,
Auto-Tint, Digital Filter On/Off, Freeze On/Off, Echo
On/Off, Help, Status and Return to Factory Preset.
50 CTS
60 DSR
20 DTR
CABLE SPECIFICATION: AMX AXC-232 Interface
Communication Settings
LD100/LD100U
Line Doubler
AMX AXC-232
INTERFACE
Communication with the LD100 Line Doubler is
accomplished by setting the following conditions:
9600, No Parity, 8 Data Bits and 1 Stop Bit. The fac-
tory BUAD rate is set at 9600, but rates of 1200,
2400 and 4800 are also available.
DB25 (MALE)
RxD 2
3 TxD
TxD 3
2 RxD
Baud Rate Selection
GROUND 7
1 GROUND
To change the RS-232 BAUD rate, remove the top
cover of the LD100 Line Doubler. A 4 switch Dip
switch is located on the front panel. Set the switch-
es from the table shown below. If the BAUD rate is
changed, the LD100 MUST be powered off and
then on for the new BAUD rate to take effect.
CABLE SPECIFICATION:
CRESTRON CNCOMH-2/CNMS Interface
LD100/LD100U
Line Doubler
CRESTON CNCOMH-2
INTERFACE
DB25 (MALE)
RxD 2
3 TxD
2 RxD
DIP Switch Settings
TxD 3
Rate
1
2
3
4
GROUND 7
5 GROUND
1200
2400
4800
*9600
ON
OFF
ON
OFF
ON
ON
OFF
OFF
ON
ON
ON
ON
ON
ON
ON
ON
* = Factory Preset
INSTALLATION
Interface to the LD100 Line Doubler is done by
using a 3 wire interface. Interface schematics for the
IBM-PC™, AMX™ and CRESTRON™ controllers
are shown to the right.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
Programming the LD100
Variable Adjustment Commands:
Command Line
The LD100 is programmed by means of a
“Command Line”, which is an ASCII string of up to
255 characters that contains one or more individual
instructions to the LD100. The Command Line
offers the best compromise between manual opera-
tion via a data terminal and automatic control via a
controller.
B or b
C or c
K or k
T or t
Adjust Brightness Level
This command is follow by an integer
between 0(minimum) and 255(maximum).
Example B1 or B12 or B123, ect.
Adjust Contrast Level
This command is follow by an integer
between 0(minimum) and 255(maximum).
Example C1 or C12 or C123, ect.
Command Line Entry
Adjust Color Level
A Command Line can be entered in either upper or
lower case by means of a data terminal or other
controller. The Echo Mode determines the response
of the LD100 to the incoming data stream. If the
Echo Mode is ON (E1 command), the entered char-
acters are echoed back to the host, and any mes-
sage are sent in its entirety. IF Echo Mode is OFF
(E0 command), no characters are sent to host.
This command is follow by an integer
between 0(minimum) and 255(maximum).
Example K1 or K12 or K123, ect.
Adjust Tint Phase
This command is follow by an integer
between 1(minimum) and 255(maximum).
If the command T0 is entered, the Auto-
Tint mode is active where as numbers
from 1 to 255 are used, the Auto-Tint
Function is bypassed. Example T1 or T12
or T123, ect.
Command Syntax
Commands consist of a header followed by a key-
word followed by additional parameters if needed.
The header is used to identify the product, in the
case the header is: LD100, . Keywords are single
characters followed by integers (if needed). All com-
mands must be separated by a comma ‘,’. White
spaces are ignored and may be used. All com-
mands strings are terminated by a CARRIAGE
RETURN (0x0d). Commands may in entered in any
order as the user see fit.
N or n Adjust Noise Reduction Level
This command is follow by an integer
between 0(minimum) and 255(maximum).
Example N1 or N12 or N123, ect.
D or d
Adjust Detail Level
This command is follow by an integer
between 0(minimum) and 255(maximum).
Example D1 or D12 or D123, ect.
Switch Commands:
Commands
A or a
Digital Filter On / Off
Source Input Select Commands:
This command is followed by an integer of
0 for off and 1 for on.
V or v
Y or y
R or r
X or x
Select Video Input Mode
This command is a single character
command.
F or f
Freeze Mode On / Off
This command is followed by an integer of
0 for off and 1 for on.
Select Y/C Input Mode
This command is a single character
command.
Other Commands:
E or e
Echo Function
This command is followed by an integer of
0 for off and 1 for on.
Select RGB Input Mode
This command is a single character
command.
P or p
This command is a single character com-
mand. This will return the LD100 to it’s
factory preset condition.
Select Component (YUV) Mode
This command is a single character
command.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A
ST or st This command will return a string showing
the current settings of the LD100.
Example:
LD100:B###,C###,K###,T###,N###,D###,V,T1,A1,F0
(Y)
(R)
(X)
Freeze
Digital Filter
Auto-Tint
Input Select
Detail Level
Noise Level
Tint Level
Color Level
Contrast Level
Brightness Level
Header
HELP or help This command will return a list of
commands used for the LD100
Line Doubler.
LD100 Local / Remote Operation
The LD100 stores all of it’s settings in a Non-volatile
ram and will return to the last known settings when
the unit is power up. The only exception is the
Freeze function. The Freeze function will be set off
during the power up cycle.
Command String Examples:
Commands can be as simple as:
LD100,B150(CR)
to complex as
When a command is received via the RS-232, only
those functions are placed in the remote mode. If a
pot function is set via the remote, it can be returned
back to local mode by adjusting that function on the
front panel. This is accomplished by creating a win-
dow around that function when in remote mode. If
that function is turned beyond the window setpoint,
that function is returned to local mode and becomes
active again.
LD100,D240,N20,C150,B102,V,T0,A1,F0(CR)
Note (CR) = Carriage Return (OxOd) or ASCII 13
15
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX B
VGA Connector Pinout
Function
Red Video
Pin
1
2
Green Video
3
Blue Video
4
Not Used
5
Ground
6
Red Return (Ground)
Green Return (Ground)
Blue Return (Ground)
Composite Sync
Composite Sync Return (Ground)
Not Used
7
8
9
10
11
12
13
14
15
Not Used
Figure 8
Horizontal Sync
Vertical Sync
Not Used
APPENDIX C
Cable Lengths and Distribution Amplifiers
Cable Type
Maximum Length
To aid in achieving the bet results from your installa-
tion, we suggest the following minimum standards
for cable runs when an LD100 is used.
Mini BNC cables, 75 ohm
1.15nS/Foot propagation
100 Feet
RG-59/U type cable, 75 ohm
150 Feet
200 Feet
To preserve the video quality of the LD100, the
signal path should be no more than –3db down at
25 MHz through a 75 ohm cable. Any distribution
amplifier should have a bandwidth no less than
–3db down at 25 MHz.
75 ohm precision video cable
Belden 8281
15 pin, high resolution VGA cables
utilizing individual high resolution
mini-coax cables for each signal from
LD100 to monitor.
25 Feet
The following cable lengths are the maximum rec-
ommended continuous lengths of 75 ohm coax
cable with BNC connectors on each end as well as
15 pin VGA cable (when using the VGA output).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
LD100 Specifications
LD100U Specifications
INPUT SIGNALS (NTSC)
Video
525 Line 2:1 Interlace
1Vp-p, Negative Sync
714mV Luminance
INPUT SIGNALS (NTSC)
Video
525 Line 2:1 Interlace
1Vp-p, Negative Sync
714mV Luminance
Y/C
Y/C (3.58) Non-Composite
700m/Vp-p Y
Y/C
Y/C (3.58) Non-Composite
700m/Vp-p Y
286mVp-p C (Burst)
700mVp-p Non-Composite,
1Vp-p Composite
286mVp-p C (Burst)
700mVp-p Non-Composite,
1Vp-p Composite
RGB
RGB
Component
Y(1V w/Sync), R-Y(714mV),
B-Y(714mV)
YUV
Y(1V w/Sync), R-Y(714mV),
B-Y(714mV)
Composite Sync
Negative, > 4Vp-p Composite
Composite Sync
Negative, > 4Vp-p Composite
INPUT SIGNALS (PAL)
Video
625 Line 2:1 Interlace
1Vp-p, Negative Sync
700mV Luminance
Y/C (4.43) Non-Composite
700m/Vp-p Y
286mVp-p C (Burst)
700mVp-p Non-Composite,
1Vp-p Composite
Y(1V w/Sync), U(700mV),
V(700mV)
OUTPUT SIGNALS (NTSC)
525 Line Progressive
Scan/1050 Line per Frame
Non-composite, Positive,
714mVp-p
59.94Hz, Negative, 4Vp-p,
75 Ohm
31.5KHz, Negative, 4Vp-p,
75 Ohm
31.5KHz/59.94Hz, Negative,
4Vp-p, 75 Ohm
R, G, B
Y/C
Vertical Sync
Horizontal Sync
Composite Sync
VGA Standard
RGB
YUV
Composite Sync
Negative, > 4Vp-p Composite
15 Pin ‘D’ Connector,
VGA Standard
OUTPUT SIGNALS (NTSC)
525 Line Progressive
Scan/1050 Line per Frame
Non-composite, Positive,
714mVp-p
59.94Hz, Negative, 4Vp-p,
75 Ohm
31.5KHz, Negative, 4Vp-p,
75 Ohm
31.5KHz/59.94Hz, Negative,
4Vp-p, 75 Ohm
LUMINANCE
Input Conditions
Output Conditions
R, G, B
Low-Pass Filter: -3db @ 11MHz
Low-Pass Filter: -3db @ 22MHz
Vertical Sync
Horizontal Sync
Composite Sync
VGA Standard
CHROMINANCE
Input Conditions
Output Conditions
Low-Pass Filter: -3db @ 6MHz
Low-Pass Filter: -3db @ 12MHz
PROPAGATION DELAY
POWER CONSUMPTION
1 Field + 2.5 Lines
15 Pin ‘D’ Connector,
VGA Standard
100-250 VAC, 50/60Hz,
60W, Auto Ranging
OUTPUT SIGNALS (PAL)
625 Line Progressive
Scan/1250 Line per Frame
Non-composite, Positive,
700mVp-p
50Hz, Negative, 4Vp-p, 75 Ohm
31.2KHz, Negative, 4Vp-p,
75 Ohm
FUSE
2 Amp, Slo-Blow AGC-2A
R, G, B
DIMENSIONS
17"W* x 3.5"H x 21"D
(43.1cm x 8.9cm x 53.3 cm)
Vertical Sync
Horizontal Sync
WEIGHT
22 lbs. (9.8Kg)
Composite Sync
VGA Standard
31.2KHz/50Hz, Negative,
4Vp-p, 75 Ohm
15 Pin ‘D’ Connector,
VGA Standard
NOTE: 625 lines 50Hz component or RGB signals are
usable with the LD100. Outputs are identical to those of
the LD100U in that mode.
LUMINANCE
Input Conditions
Output Conditions
Low-Pass Filter: -3db @ 11MHz
Low-Pass Filter: -3db @ 22MHz
CHROMINANCE
Input Conditions
Output Conditions
Low-Pass Filter: -3db @ 6MHz
Low-Pass Filter: -3db @ 12MHz
PROPAGATION DELAY
1 Field + 2.5 Lines (NTSC)
1 Field +3.5 Lines (PAL)
POWER CONSUMPTION
100-250 VAC, 50/60Hz,
60W, Auto Ranging
FUSE
2 Amp, Slo-Blow AGC-2A
DIMENSIONS
17"W* x 3.5"H x 21"D
(43.1cm x 8.9cm x 53.3 cm)
WEIGHT
22 lbs. (9.8Kg)
*19" (48.26cm) with rack mount ears
*19" (48.26cm) with rack mount ears
Design and specifications are subject to change without notice.
Design and specifications are subject to change without notice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY INFORMATION
All FAROUDJA Laboratories products are warranted to the original purchase against
defective materials and workmanship under normal use and service for a period of one
(1) year from the date of shipment. This warranty shall be of no force and effects if mod-
ifications have been made by the purchaser or its agents or employees or if damage
results from connecting the product to incompatible equipment or power. This warranty
will also be void if the product is not returned to FAROUDJA Laboratories in the original
shipping container.
The purchaser’s sole remedy with respect to the breach of this warranty is for the sell-
ing distributor to repair or replace, at its option, those products which the selling distrib-
utor determines to have breached this warranty within the specified period.
Any claims under this warranty should be made by telephone or in writing to the selling
distributor or FAROUDJA Laboratories. No products should be returned to the selling
distributor or to FAROUDJA Laboratories without its prior consent, and then, only with
freight prepaid. FAROUDJA Laboratories will prepay the return shipment.
Specifications and price change privileges are reserved.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR
IMPLIED INCLUDING, WITHOUT LIMITATIONS, ANY IMPLIED WARRANTY FOR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
FAROUDJA Laboratories
750 Palomar Ave., Sunnyvale, California 94086
Tel: 408-735-1492 Fax: 408-735-8571
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|