Download from Www.Somanuals.com. All Manuals Search And Download.
Legal Notes
Unauthorized reproduction of all or part of this guide is prohibited.
The information in this guide is subject to change without notice.
We cannot be held liable for any problems arising from the use of this product, regardless of the information herein.
Regarding Trademarks
Microsoft®, Windows®, Windows 7®, Windows Vista®, Windows XP®, Windows Server®, Word®, Powerpoint® is a
registered trademark of Microsoft Corporation in the U.S. and/or other countries. KPDL is a trademark of Kyocera
Corporation. PCL® is a trademark of Hewlett-Packard Company. TrueType® and Mac OS® are registered trademark of
Apple Inc., Adobe®, Acrobat®, Adobe Reader®, Photoshop® and PostScript® are trademarks of Adobe Systems,
Incorporated. UNIX® is a trademark in the United States and other countries, licensed exclusively through X/Open
Company Limited.
All other brand and product names herein are registered trademarks or trademarks of their respective companies.
Examples of the operations given in this guide support the Windows 7 printing environment. Essentially the same
operations are used for Microsoft Windows Vista, Windows XP, Windows Server 2003, and Windows Server 2008
environments.
User Interface screen captures shown in this guide may differ depending on your printing device.
This user guide and its contents were developed for the 5.2 driver.
Models supported by the KX printer driver
TASKalfa 3050ci
TASKalfa 3550ci
TASKalfa 4550ci
TASKalfa 5550ci
TASKalfa 6550ci
TASKalfa 7550ci
© 2011 KYOCERA MITA Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Chapter 1 Installation
Selecting an Installation Method ................................................................................................... 1-1
Installing Utilities ........................................................................................................................... 1-2
Custom Installation ....................................................................................................................... 1-4
Installing in Custom Mode with a Network Connection using Discover ................................... 1-4
Installing in Custom Mode with a USB Connection using Discover ......................................... 1-5
Installing in Custom Mode with a Network Connection using Custom Select .......................... 1-6
Installing a Printer Driver in Windows XP .............................................................................. 1-10
Changing the Default Driver Settings .................................................................................... 1-10
Chapter 2 Device Settings
Auto Configure .............................................................................................................................. 2-3
Password Protect Administrator Settings ................................................................................ 2-5
Lock Settings ................................................................................................................................ 2-7
Job Accounting ............................................................................................................................. 2-9
Printing with Job Accounting ................................................................................................. 2-10
User Settings .............................................................................................................................. 2-11
KX DRIVER
i
Download from Www.Somanuals.com. All Manuals Search And Download.
PDL (Page Description Language) ............................................................................................. 2-12
XPS Driver .................................................................................................................................. 2-16
Compatibility Settings ................................................................................................................. 2-16
Chapter 3 Quick Print
Quick Print Options ....................................................................................................................... 3-1
Common Printing Options ....................................................................................................... 3-1
Collate ..................................................................................................................................... 3-2
Multiple Pages per Sheet ........................................................................................................ 3-3
Saving a Profile ....................................................................................................................... 3-4
Editing a Profile ....................................................................................................................... 3-5
Importing a Profile ................................................................................................................... 3-5
Exporting a Profile ................................................................................................................... 3-6
Chapter 4 Basic
Basic Settings ............................................................................................................................... 4-1
Source and Media Types .............................................................................................................. 4-2
Creating a Custom Page Size ................................................................................................. 4-3
Printing in Duplex Mode .......................................................................................................... 4-4
Printing in Color, Black & White, and EcoPrint .............................................................................. 4-5
Chapter 5 Layout
Multiple Pages per Sheet .............................................................................................................. 5-1
Printing Multiple Pages per Sheet ........................................................................................... 5-1
Setting Scaling on the Page .................................................................................................... 5-2
Full Bleed ...................................................................................................................................... 5-2
Printing a Booklet .................................................................................................................... 5-3
User Guide
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 Finishing
Offset Jobs .............................................................................................................................. 6-2
Finishing Edge .............................................................................................................................. 6-3
Custom Finishing Edge Settings ............................................................................................. 6-4
Stapling a Print Job ................................................................................................................. 6-6
Chapter 7 Imaging
Print Quality and EcoPrint ............................................................................................................. 7-1
Selecting Print Quality ............................................................................................................. 7-1
Font Settings ........................................................................................................................... 7-3
Font Substitution ..................................................................................................................... 7-3
Selecting Graphics Settings .................................................................................................... 7-4
Optimization Settings .............................................................................................................. 7-5
CIE Optimization ..................................................................................................................... 7-6
Image Compression Mode ...................................................................................................... 7-6
Color Mode ................................................................................................................................... 7-6
Printer Profile ................................................................................................................................ 7-6
Setting a Default Color Profile ................................................................................................. 7-8
Color Adjustment .......................................................................................................................... 7-9
Adjusting HSL (Hue, Saturation, Lightness) ............................................................................ 7-9
Adjusting Color Balance ........................................................................................................ 7-10
Color Conversion ........................................................................................................................ 7-10
Chapter 8 Publishing
KX DRIVER
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Cover Mode .................................................................................................................................. 8-1
Printing Page Inserts ............................................................................................................... 8-5
Transparency Interleaving ............................................................................................................ 8-6
Inserting Backing Sheets Between Transparencies ................................................................ 8-7
Chapter 9 Job
Job Storage (e-MPS) .................................................................................................................... 9-1
Job Storage (e-MPS) options .................................................................................................. 9-1
Custom Box .................................................................................................................................. 9-2
Storing a Job in a Custom Box ................................................................................................ 9-2
Quick Copy ................................................................................................................................... 9-3
Printing a Quick Copy Job ....................................................................................................... 9-3
Proof and Hold .............................................................................................................................. 9-3
Private Print .................................................................................................................................. 9-4
Storing a Job Storage Job ....................................................................................................... 9-5
Selecting a Job Name ............................................................................................................. 9-6
Chapter 10 Advanced
Editing a Prologue/Epilogue File ........................................................................................... 10-1
Deleting a Prologue/Epilogue File ......................................................................................... 10-2
Security Watermark .................................................................................................................... 10-5
Color Optimizer ........................................................................................................................... 10-8
Selecting Status Monitor Options .......................................................................................... 10-9
EMF Spooling ........................................................................................................................... 10-11
Selecting EMF Spooling ...................................................................................................... 10-11
Glossary ................................................................................................................................................................... i
User Guide
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Installation
A printer driver is an application that manages communication between a printer
and your computer. Once installed, the printer driver settings must be
configured in the printer Properties and Printing Preferences.
Note: In Windows operating systems, you must be logged in with
administrator rights to install the printer driver.
This section describes the initial steps to take before you install the printer
driver, and based on your operating system, the next procedure you can follow.
Turn on the computer and the printer.
1
2
In Windows 7 and Windows Vista with a USB connection, a driver installation
will be made from the Microsoft Windows Update site if a certified driver is
available and the system is connected to the web. We recommend you continue
with the steps to install the driver for an expanded feature set. In Windows, if the
Found New Hardware Wizard dialog box appears during the installation
process, click Cancel. If the Hardware Installation warning dialog box
appears, click Continue Anyway.
Insert the Product Library disc into the disc drive. The Main Menu appears.
Note: If the Product Library fails to start after inserting it into the disc drive,
use Windows Explorer to locate Setup.exe on the local drive and double-click
to open.
Click View License Agreement to read the license agreement.
Click Accept to proceed.
3
4
5
To begin the installation, click Install Software.
Note: If the Windows Security warning dialog box appears at any point
during the installation process, click Install this driver software anyway.
The Installer appears with several installation methods displayed.
6
You can select Express Mode for a network or USB connection and the
installation wizard will discover your printers. You can also select Custom
Mode for a network or USB connection and either manually select installation
packages and specify utilities or let the installation wizard discover your printer.
KX DRIVER
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Express Mode Installation
Custom Mode Installation
on page 1-6
On the Installation Method page, click Utilities to install printer utilities. You
can also select utilities to install during the Custom Installation procedure.
If the installation wizard detects older driver or utility components, the Software
Component Upgrade page appears.
Choose the component to upgrade. Click Next.
1
2
3
Confirm your upgrade settings. To start the upgrade, click Upgrade.
When the upgrade completes, click Next. The Installation Method page
appears.
Express Mode applies to driver installation for a USB or network connection
only. The installation wizard discovers printers that are turned on, and
connected by USB and network cable. In Custom Mode, you are able to select
the installation packages and specify the port.
This section describes the express installation procedure of the driver software
in Windows operating systems.
Ensure that your printer and computer are turned on and connected by USB or
network cable.
1
Note: In Windows 7 and Windows Vista with a USB connection, a driver
installation will be made from the Microsoft Windows Update site if a certified
driver is available and the system is connected to the web. We recommend you
continue with the steps to install the KX Driver for an expanded feature set. In
Windows, if the Found New Hardware Wizard dialog box appears during the
installation process, click Cancel. If the Hardware Installation warning dialog
box appears, click Continue Anyway.
User Guide
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
On the Installation Method page, click Express Mode.
2
3
The Discover Printing System page opens, searching for your printing
system.
If Discover finds your printing system, select your model from the list and click
Next.
If Discover does not find your printing system, a message appears. Remove
and reinsert the USB or network cable, and ensure it is connected properly.
Click Refresh to retry the discovery. If the system still cannot find your printing
system, contact your system administrator.
Select Use host name for port name to use a host name for the Standard
TCP/IP port. If the installation wizard still displays the IP address, contact your
system administrator. (Not available with a USB connection.)
4
5
6
Click Information if you want to open a dialog box with details about IP
Address, Host Name, Printer Model, Contact, Location, and Serial Number.
Click OK. Click Next. (Not available with a USB connection.)
On the Printer Settings page, you can assign a name to your printing system.
Note: With a first time USB connection, the Printer Settings page does not
appear.
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
7
8
The Installation Completed page appears displaying the following driver
options.
Print a test page
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in Device Settings.
Device Settings
Select the Device Settings check box to open Device Settings where you
can choose installed options for your printing system. (The Device Settings
check box appears only in Windows XP with a network connection.)
When the installation completes successfully, click Finish to exit the installation
wizard.
A message may appear if there is a software installation failure.
KX DRIVER
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
Custom Mode applies to driver installation for a USB or network connection.
The installation wizard can discover printers that are turned on, and connected
by USB and network cable, or you can manually select the driver from drivers
that are available. You can specify the printer port, fonts, and the utilities you
want to install.
Printer drivers that ship with Windows operating systems are called minidrivers.
The minidriver is available separately for PCL and KPDL and provides basic
support for your printer.
The KX XPS DRIVER is only available for printing systems used with Windows
7 and Windows Vista. The XPS driver is discussed in the Device Settings
chapter. Minidriver functionality is not documented in this user guide.
This section describes the custom installation procedure of the driver software
in Windows operating systems using a network connection.
Ensure that your printer and computer are connected to a network.
1
On the Installation Method page, select Custom Mode.
2
The Discover Printing System page opens searching for your printing system.
The Discover button is automatically selected. A list of models appears. Click
3
Next.
If Discover does not find your printing system, a message appears. Remove
and reinsert the network cable, and ensure it is connected properly. Click
Refresh to retry the discovery. If the system still cannot find your printing
system, contact your system administrator.
On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
4
installation. Click Next.
If you only select software packages from the Utility tab, you will skip to the
Confirm Settings page.
On the Printer Settings page, you can assign a name for your printing system.
You can also choose to share this printer with others or set this printer as the
5
default printer. Make your selections, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
6
Note: If the Hardware Installation warning dialog box appears, click
Continue.
User Guide
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The Installation Completed page appears displaying the following driver
7
options.
Print a test page
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in Device Settings.
Device Settings
Select the Device Settings check box to open Device Settings where you
can choose installed options for your printing system. (The Device Settings
check box appears only in Windows XP.)
When the installation completes successfully, click Finish to exit the installation
wizard.
A message may appear if there is a software installation failure.
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
This section describes the custom installation procedure of the driver software
in Windows operating systems using a USB connection. With Discover, all
devices available for the driver installation are found automatically. This is the
recommended Custom Mode USB installation method.
Ensure that your printer and computer are turned on and connected using a
USB cable.
1
Note: In Windows 7 and Windows Vista, a driver installation will be made from
the Microsoft Windows Update site if a certified driver is available and the
system is connected to the web. We recommend you continue with the steps to
install the KX Driver for an expanded feature set.
On the Installation Method page, select Custom Mode.
2
The Discover Printing System page opens, searching for your printing
system. The Discover button is automatically selected.
3
Select your device and click Next.
If Discover does not find your printing system, a message appears. Remove
and reinsert the USB cable, and ensure it is connected properly. Click Refresh
to retry the discovery. If the system still cannot find your printing system, contact
your system administrator.
KX DRIVER
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
installation. Click Next.
4
5
If you only select software packages from the Utility tab, you will skip to the
Confirm Settings page.
On the Printer Settings page, you can assign a name to your printing system.
Note: With a first time USB connection, the Printer Settings page does not
appear.
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
6
7
Note: If the Hardware Installation warning dialog box appears, click
Continue Anyway.
The Installation Completed page appears displaying the following driver
options.
Print a test page
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in Device Settings.
When the installation completes successfully, click Finish to exit the installation
wizard.
A message may appear if there is a software installation failure.
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
This section describes the custom installation procedure of the driver software
in Windows operating systems using a network connection.
Ensure that your printer and computer are connected to a network.
1
On the Installation Method page, select Custom Mode.
2
User Guide
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The Discover Printing System page opens, searching for your printing
system. The Discover button is automatically selected. Choose Custom select
and click Next.
3
4
The Printing System page appears. Select your printing system model from
the list and click Next. If there is only one driver model, this page does not
appear. Proceed to the next step.
On the Printer Port page, select the port connected to your printing system, or
add a port connected to your system by clicking Add Port. Click Next.
5
6
On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
installation. Click Next.
If you only select software packages from the Utility tab, you will skip to the
Confirm Settings page.
On the Printer Settings page, you can assign a name for your printing system.
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
7
8
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
Note: If the Hardware Installation warning dialog box appears, click
Continue.
The Installation Completed page appears displaying the following driver
options.
9
Print a test page
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in Device Settings.
Device Settings
Select the Device Settings check box to open Device Settings where you
can choose installed options for your printing system. (The Device Settings
check box appears only in Windows XP.)
When the installation completes successfully, click Finish to exit the installation
wizard.
A message may appear if there is a software installation failure.
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
KX DRIVER
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
The installation of the printer is now complete. If prompted, restart your
computer.
This section describes the custom installation procedure of the driver software
in Windows operating systems using a USB connection. With the Custom
select option, you manually select the printing system and printer port to install.
In Custom mode, Custom Select is not recommended for USB in
environments where printing systems are connected and reconnected using
USB ports. The Discover method provides a more reliable installation path.
Ensure that your printer and computer are turned on and connected using a
USB cable.
1
Note: In Windows 7 and Windows Vista, a driver installation will be made from
the Microsoft Windows Update site if a certified driver is available and the
system is connected to the web. We recommend the Custom Mode using
Discover for USB connections to ensure a reliable installation.
On the Installation Method page, select Custom Mode.
2
The Discover Printing System page opens, searching for your printing
system. The Discover button is automatically selected. Choose Custom select
3
and click Next.
The Printing System page appears. Select your printing system model from
the list and click Next.
4
On the Printer Port page, select an existing port connected to your printing
system. Click Next.
5
On the Custom Installation page, select the driver and software packages you
want to install from the Driver and Utility tabs, and clear those not intended for
6
installation. Click Next.
If you only select software packages from the Utility tab, you will skip to the
Confirm Settings page.
On the Printer Settings page, you can assign a name to your printing system.
7
You can also choose to share this printer with others or set this printer as the
default printer. Make your selections, and then click Next.
On the Confirm Settings page, click Install if the settings are correct. Click
Back to correct the settings.
8
Note: If the Hardware Installation warning dialog box appears, click
Continue Anyway.
The Installation Completed page appears displaying the following driver
options.
9
Print a test page
User Guide
1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
This selection verifies a connection with the printer and creates a print out of
the installed driver components.
Enable Status Monitor
The Status Monitor displays system status messages on your computer
screen during printing tasks. The Status Monitor button appears on the
Advanced tab.
Show Quick Print Tab
This selection lets you define basic print options into group profiles that can
be accessed easily. The Show Quick Print tab option also appears in the
Administrator Settings in Device Settings.
When the installation completes successfully, click Finish to exit the installation
wizard.
A message may appear if there is a software installation failure.
Click Finish, and retry the installation. If the same message appears again,
contact your system administrator.
The installation of the printer is now complete. If prompted, restart your
computer.
You can expand the functionality of your printer driver by installing optional
components.
On the Product Library disc menu > Advanced Tools menu, select Optional
Printer Components.
1
Select a printer to install optional components, and click Next.
2
On all Select pages, choose your components, and click Next.
3
On the Confirm Settings page, click Install if the displayed settings are
correct. Click Back to correct any settings.
4
The Printer Components Installation Completed page appears. Click Finish.
5
When you have completed installing printers and optional components, restart
your computer if prompted.
The Add Printer Wizard displays a series of pages that guide you through
printer installation. You are prompted to make installation choices on each
page.
This section describes how to install a printer driver using the Add Printer
Wizard in Windows 7 and Windows Vista.
KX DRIVER
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista).
1
Click Add a printer.
2
3
The Add Printer Wizard appears. Click either Add a local printer or Add a
network, wireless or Bluetooth printer. Follow the instructions on each page,
and then click Next to proceed to the next page.
Note: If the Windows Security warning dialog box appears, click Install this
driver software anyway.
The last page of the wizard appears with a message that you’ve successfully
added the printer you selected. Installation of the printer driver is now complete.
Click Print a test page if you want to produce sample print output from the
newly installed printer. To close the Add Printer Wizard, click Finish.
4
This section describes how to install a printer driver using the Add Printer
Wizard in Windows XP.
Click Start and Printers and Faxes.
1
Click Add a printer.
2
The Add Printer Wizard appears. Follow the instructions on each page, and
then click Next to proceed to the next page.
3
Note: If the Found New Hardware Wizard page appears, click Cancel. If the
Hardware Installation warning dialog box appears, click Continue Anyway.
When the Completing the Add Printer Wizard page appears, installation of
the printer driver is now complete. To close the Add Printer Wizard, click
4
Finish. If prompted, restart your computer.
The printer driver software can be accessed from the Print dialog box of an
application, or from Start. If accessed from an application, then changes made
to driver settings remain in effect until the application ends. If accessed from
Start, changes are maintained as the default printer settings.
Default driver settings apply to print jobs initiated from any application, but they
are overwritten by setting changes made within each application.
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista), or Printers and Faxes (Windows
1
XP).
Right-click on your printing system icon.
2
User Guide
1-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Click Printing Preferences.
3
4
5
In the Printing Preferences dialog box, select the desired features in all tabs.
Click OK to save the settings.
KX DRIVER
1-11
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Device Settings
In Device Settings, you can select installed printing system options so the
associated features can be used with the printer driver. You can also match the
memory setting in the driver with the memory installed in your printing system,
which lets the driver manage font downloads more efficiently. Administrator,
User, PDL (Page Description Language), and Compatibility settings can also be
selected.
Device Settings can be accessed from Devices and Printers (Windows 7),
Printers (Windows Vista), or Printers and Faxes (Windows XP) folder.
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista), or Printers and Faxes (Windows
XP).
1
Right-click the desired printing system model.
2
3
Click Printer properties (Windows 7) or Properties (Windows Vista, Windows
XP).
Click Device Settings.
4
Optional devices extend the capabilities of your printing system for source,
finishing, and job storage.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
You can set the printer driver to match the optional devices installed on your
printing system.
In the Properties dialog box, click Device Settings.
1
In Device Settings > Device options, select the check boxes for all installed
devices.
2
Before using the Punch option in the Finishing tab, you must set punch options
in the Device Settings tab. The selected option is available under Punch in the
Finishing tab.
User Guide
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
In Device Settings, under Device options, select a finisher that supports
1
2
punch. Or if already selected, double-click the blue text.
Depending on the punch unit attached, select one option:
None
No punch option available in the Finishing tab.
2 hole
2 hole option available in the Finishing tab.
2 & 3 hole
2 hole and 3 hole options available in the Finishing tab (inches based).
2 & 4 hole
2 hole and 4 hole options available in the Finishing tab (metric based).
Click OK.
3
You can create up to 1000 custom boxes for storing print jobs. Custom boxes
can be assigned to users who can print the jobs later from the printing system's
operation panel.
In Device Settings, select Hard disk. Or if selected, double-click Hard disk.
1
In the Hard Disk Settings dialog box, click Add.
2
In the Defined custom boxes list, a new Box number and Box name appear.
3
If desired, change the number and name in the Box number and Box name
boxes. The number must be within a range of 1 to 1000, and the name length
can be up to 32 characters. You can also type a user name up to 20 characters.
Select Shared box to enable the box for multiple users.
4
Check box selected: All network users can save jobs in the box.
Check box clear: Only the box owner and network administrator can save jobs
in the box.
To require users of a shared box to type a password before printing, select
Require password, and type a password up to 16 characters.
5
Click OK in the Hard Disk Settings and Properties dialog boxes.
6
The new custom box appears in the Custom Box dialog box when printing.
You can remove a custom box by selecting it in the Defined custom boxes
list and clicking Delete.
You can import a custom box list by clicking Import and browsing for a valid
custom box list file (.CSV or .KXU).
You can save the current custom box list (.CSV or .KXU) in your computer or
network by clicking Export. A saved list can be imported into another printer
driver.
KX DRIVER
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Auto Configure detects the devices installed on the printing system if it is
connected over a network. Auto Configure can detect printing system devices
such as input devices. When your computer is connected to the printing system
through a TCP/IP or WSD port, the Auto Configure button appears in Device
Settings. Auto Configure updates the Device options list, Memory, and
preview images to keep the printer driver consistent with the printing system
configuration.
Not all installed devices are detected by using Auto Configure. Before
selecting OK in Device Settings, check the settings to make sure that they are
correct.
Note: The default setting for Windows XP Service Pack 2 is for the Windows
Firewall to be set to On. The setting can be changed to allow communication
between the printing system and your computer. In the Windows Security
Alert dialog box, click Unblock.
Silent Auto Configuration
Silent auto configuration checks the printing system every 10 minutes for
changes in optional devices or memory. When a change is detected, the driver
is automatically updated with the new settings. Silent auto configuration is
only available for printing systems installed in Windows 7 or Windows Vista.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
The Auto Configure button can be used to detect all available device options
when the printing system is connected to a network through a TCP/IP port.
Verify that all optional devices are attached to the printing system, and that it is
turned on and ready to print.
1
In Device Settings, click Auto Configure.
2
In Windows XP, the driver settings are updated immediately.
In Windows 7 and Windows Vista, the Auto Configure dialog box opens. Select
from Auto configure options:
Auto Configure Now
Click the button at any time to retrieve the current settings from the printing
system. It is recommended to do this when the driver is first installed and
when Silent auto configuration is turned off.
Silent auto configuration
Select to let the driver check the printing system every 10 minutes for any
changes in optional devices or memory. When a change is detected, the
driver is automatically updated with the new settings.
This feature displays the amount of memory in the printing system.
User Guide
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Administrator Settings lets you set options that include controlling
accessibility, displaying features in the interface and setting a password to
control access to the Administrator Settings options. Selections vary
according to printing system model.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
An administrator can control the display of the Quick Print tab, and other
miscellaneous settings, including password and SNMP settings.
This option lets you control the display of the Quick Print tab. You can define
basic print options into group profiles for improved accessibility.
With a clear check box for Show Quick Print tab, the tab does not appear in
the Printing Preferences dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Show Quick Print tab.
With a selected check box for the Show Quick Print tab, the tab appears in the
Printing Preferences dialog box. When you select the Show Quick Print tab
check box, you can access additional check boxes:
Hide other tabs displays only the Quick Print tab to the user.
Set Quick Print tab as default opens to this tab when you access Printing
Preferences.
Hide Edit Quick Print control prevents users from customizing the Quick
Print tab.
This option lets you embed count information in the print job, which can be used
by some applications for accounting purposes. Count information includes the
number of copies produced as well as duplex printing, multiple pages per sheet,
color mode, color page count, and paper size values.
When PDF is selected in the PDL settings dialog box, only color page count
information is sent with PDF.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Count Information.
This option lets you send the application name with a print job, so that a
different printing process is used for each application. For example, color
printing is adjusted to print color accurately when color is specified as Full color
rather than RGB.
This option is unavailable when PDF is selected in the PDL Settings dialog box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Send Application name.
KX DRIVER
2-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
This option lets you set all printing from each installed application to use the
same driver settings as defined in a profile. Before using this feature:
A profile must be created in the Profiles dialog box, accessed from any
Printing Preferences tab.
An association must be created between a profile and an application in the
Application Based Printing dialog box, accessed from the Profiles dialog
box.
To enable this feature, in Device Settings > Administrator Settings >
General, select Associate Profile with application.
You can set Password protect administrator settings in the Administrator
Settings dialog box to prevent unauthorized changes in this dialog box. If
selected, this setting prompts you to enter a password and confirm the
password. This password protection blocks access to all Administrator
Settings options.
You can set a password to prevent unauthorized changes in the Administrator
Settings dialog box.
In Device Settings > Administrator Settings > General, select Password
protect administrator settings.
1
In the Password dialog box, enter a password, using at least 4 and no more
than 16 characters. Reenter the password in Confirm password and click OK.
2
You can remove the administrator password.
In Device Settings, select Administrator.
1
In the Enter Password dialog box, type the password and click OK.
2
In the Administrator Settings dialog box, clear the Password protect
administrator settings check box and click OK.
3
Simple Network Management Protocol (SNMP) is a set of rules that govern the
management of network devices, such as printing systems. These settings
determine the level of security when using the Auto Configure feature, and
prevent unauthorized printing to the SNMPv3 printing system. SNMP settings
must be set in the printer driver and in the printing system’s Command Center
RX.
The following options are available:
SNMPv1/v2c
This option ensures successful Auto Configure communication using Read
community name and Write community name.
SNMPv3
User Guide
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
This option ensures secure Auto Configure communication using a user
name and password. Authentication and privacy options are available by
selecting Settings.
Apply to other models
This option displays a list of installed printing systems to apply the selected
settings.
You can select options for secure communication with the printing system.
Authentication
This option provides an algorithm to check that a transferred file has arrived
intact. Message Digest 5 (MD5) and Secure Hash Algorithm 1 (SHA1) are hash
algorithms used to authenticate packet data.
MD5
This option provides a cryptographic hash function with a 128 bit hash value.
It adds security and protection against Gateway Load Balancing Protocol
(GLBP)-spoofing software.
SHA1
This option produces a message digest that is 160 bits long. SHA1 is the
successor to MD5.
Privacy
This option uses encryption for secure communication. It is available after you
select the Authentication option. You may select one Privacy option.
DES
This option uses the Data Encryption Standard for encryption. DES turns
cleartext into ciphertext via an encryption algorithm. It encrypts and decrypts
data using 8-byte blocks and a 56-bit key.
AES
This option uses the Advanced Encryption Standard for encryption. AES is a
symmetric block cipher that can process data blocks of 128 bits, using cipher
keys with lengths of 128, 192, and 256 bits. It is more secure than DES.
These settings in the driver must be set to match the settings in the printing
system’s Command Center RX.
In Device Settings > Administrator Settings > General, click SNMP
Settings.
1
Select SNMPv1/v2c or SNMPv3.
2
For SNMPv1/v2c, type the Read community name and Write community
name, to a maximum of 32 characters, and click OK.
For SNMPv3, type a User name to a maximum of 32 characters, and a
Password from 8 to 32 characters.
To set authentication and privacy options for SNMPv3, click Settings.
3
In the dialog box, select from the available options.
4
KX DRIVER
2-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Click OK.
5
6
Optional: Under Apply to other models, you can click Select and choose from
available models. The SNMP settings are applied to all selected models.
An administrator can specify settings at the tab or feature level in the driver, and
then lock them. The settings are then applied to all print jobs, and changes are
restricted. The settings are locked in Device Settings > Administrator
Settings > Lock Settings. For example, a driver setting could be set for
printing duplex documents. This would save paper, resulting in cost savings and
ecological benefits.
Locking a setting will also lock the feature where it appears in other tabs. For
example, selecting Lock Multiple pages per sheet will also select and lock that
feature in the Quick Print and Layout tabs.
The administrator can also set a password that is required to temporarily unlock
a feature.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
The Lock Settings tab displays driver settings that an administrator can lock.
Once locked, user changes are restricted and the settings are applied to all print
jobs. Once the settings are made, the Password settings option can be
accessed. This lets an administrator control usage of paper and toner amounts:
Black & White mode
This option disables all color settings in the driver's Imaging tab and prints
all jobs with black toner only.
EcoPrint
This option locks the EcoPrint setting.
Duplex
This option locks the current Print on both sides setting selected in the
Quick Print or Basic tab.
Multiple pages per sheet
This option locks the current Multiple pages per sheet setting selected in
the Quick Print or Layout tab. The Pages per sheet option is not locked.
Clicking the icon in the Quick Print tab, or the selection in the Layout tab,
switches between the two-page and four-page options. In the Layout tab, all
options are available and not limited to two-page and four page.
Profile with application
This option locks a defined profile of driver settings by application.
Job tab
This option locks settings selected in the Job tab.
Security settings
This option locks the Security Watermark in the Advanced tab. Security
Watermark is an optional plug-in.
Password settings
User Guide
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
The password set by the administrator temporarily unlocks driver features. It
prompts the user for a password. When the administrator sets the password,
the Unlock button appears in the driver tabs or the Application Based
Printing dialog box. To unlock a feature, click Unlock and type the
password.
User login provides job restriction by user, in contrast to the Job accounting
feature, which assigns privileges by division or department. A maximum of 1000
login user names and passwords can be registered at the printing system and
1000 User IDs and passwords can be stored in the printer driver for use with
multiple printing systems.
User login adds users with a user name and password. The user name can
be in user principal name (UPN) format: [email protected]. The UPN
format supports multiple domains. The UPN format is not needed if the default
domain registered in the device is used.
This feature limits printing privileges to specified users for secure printing and
accounting. The number of pages printed by each user will be tracked by the
printing system.
Users added in the printer driver must also be manually registered at the
printing system’s operation panel.
User login settings selected in the driver are applied to every print job sent from
your computer. The available options are as follows.
Use specific name
This option can be used to specify a user name and password to use the
same User login for every print job. If this option is selected, the user does
not have to type the name and password for each print job.
Prompt for name
This option prompts the user for a user name and password. You can use a
name that is not on the list, and the name is not added to the list. When
sending a print job, type a Name and Password when prompted, then click
OK to print.
If you type a name that is not registered in the printing system, the job prints
only if Unknown User ID Job is set to Permit at the printing system.
Prompt for name and validate
This option prompts for a Name and Password. For the job to print, the user
name and password entered must be on the Login user name list. You can
use the Login user names entered in the Login user name list of the driver.
When sending a print job, type a Name and Password when prompted, then
click OK to print. This option ensures that the job prints, only after verifying
that the selected Name is saved in the driver.
Validate user name (computer) or prompt for login user name
This option searches for the Windows User name in the driver’s Login user
name list. Validation is done every time the user prints a job. If the Windows
User name exists in the Login user name list, the associated driver Login
user name and Password from the list are used for the print job. To release
the print job, the user must enter the Login user name and Password at the
printing system operation panel.
If a match is not found, the driver checks for administrator or user
permissions. With user permissions, the print job is canceled, and the user is
KX DRIVER
2-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
prompted to contact an administrator to establish printing permissions. With
administrator permissions, the driver prompts for the Login user name and
Password. Along with the Windows User name, these are then added to the
list so succeeding print jobs do not require the user to enter a Login user
name and Password again.
Login User Name
Click to add, delete, edit, import, or export login user names and passwords.
Once a Login user name list is created, the list can be exported as a group
by saving it as a text file (.CSV, .KXC., and .TXT). To import a Login user
name list, browse for an existing list and save it in your printer driver.
After login user names are assigned and user login mode is set to On at the
printing system, you can choose User login to print in user login mode.
In Device Settings > Administrator Settings > User Login, select User
Login.
1
Select a User Login option:
2
Use specific name
Prompt for name
The remaining User Login options become available when you create a login
user name list.
Note: If you select the Use specific name or Prompt for name option,
proceed to step 5.
Under the Login user name list, click the buttons to view and manage the list.
3
Select from the remaining User Login options:
4
Prompt for name and validate
Validate user name (computer) or prompt for login user name
Click OK in all dialog boxes.
5
Print the document from the application.
6
When the Print Options dialog box appears, type or select a Name and
Password, and click OK. Login is required for some options.
7
Job accounting gives an administrator the ability to control usage of a printing
system. With Job accounting, an administrator can assign account IDs
(identification numbers) to users or departments, a specific account ID, or make
account ID input mandatory for printing. After account IDs are created, you can
view from the printing system operation panel the number of copies associated
with a specific ID as well as limit the number of copies for individual IDs.
Account IDs can be up to 8 digits.
User Guide
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Note: Job accounting must be set to On at the printing system. A maximum
of 1000 account IDs can be registered at the printing system and 1000 account
IDs can be stored in the printer driver for use with multiple printing systems.
Job accounting supports the following options:
Use specific account ID
Select this option to track the print jobs of a user or group with an account ID.
It sends the account ID with each print job. An administrator can restrict a
user or group from changing their account ID by using the Password
protect administrator settings in the Administrator Settings dialog box.
Prompt for account ID
Select this option to track the print jobs of a user or group with an account ID
as well as prompt for an account ID. At the time a print job is sent, the user is
prompted to enter a Job Accounting ID.
Prompt for account ID and validate
Select this option to prompt for an account ID that is saved in the driver.
When sending a print job, type an account ID when prompted, then click OK
to print. The account ID is validated against the account ID list. If typed
incorrectly, you are prompted to type it again.
Display account ID list
Select this option to display the account ID list at the time of printing. The
print job can be assigned to a user or group. The account ID list is stored in
the driver and more than one ID must be established for the list to appear.
Account IDs
Add, edit, or delete account IDs from the list stored in the driver. Account ID
descriptions match the user or group with an account ID. After an account ID
list is created, the list can be exported as a group by saving it as a text file
(.CSV, .KXC, .TXT). To import an account ID list, browse for an existing list
and open it.
After account IDs are assigned and Job accounting is set to On at the printing
system, the number of pages printed is added to the selected account ID total.
In Device Settings > Administrator Settings > Job Accounting, select Job
accounting.
1
Select a Job Accounting option:
2
Use specific account ID
Prompt for account ID
The remaining Job accounting options become available when you create an
account ID list.
If you select the Use specific account ID or Prompt for account ID option,
proceed to step 5.
Select Account ID List to create and manage account ID lists.
3
Select from the remaining Job accounting options:
4
KX DRIVER
2-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Prompt for account ID and validate
Display account ID list
Click OK in all dialog boxes.
5
6
7
Print the document from the application.
For some options, when the Print Options dialog box appears, type or select
an account ID, and click OK.
User Settings lets you specify user and department names, select the default
unit of measure, and change the driver display language.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Identification lets you identify your print job with a User name and
Department name, up to 31 characters. The User name can be used to identify
a print job stored on the hard disk.
You can type User name and Department information to be used with the Job
Storage (e-MPS) feature.
In Device Settings > User, type your preferred name in the User name text
box.
1
Type your department or group name in Department text box.
2
You can type up to 31 characters in the User name and Department text
boxes.
Click OK in the User Settings and Properties dialog box.
3
You can set Inches or Millimeters as the unit of measurement. This is used for
the following settings:
Custom page size setting in the Page Sizes dialog box in the Basic tab.
Spacing setting in the Watermark Add and Edit dialog boxes in the
Advanced tab.
Poster settings in the Layout tab.
Gutter settings in the Finishing tab.
You can select a unit for displaying measurements in the user interface.
In Device Settings > User Settings, select Inches or Millimeters.
1
User Guide
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Click OK in the User Settings and Properties dialog boxes.
2
The Language preference option specifies the user interface language of
Device Settings in Properties and all tabs of Printing Preferences.
Available languages vary depending on your locale and your computer settings.
You can select a user interface language.
In Device Settings > User Settings, select the desired language from the
Select language list.
1
Click OK in the User Settings and Properties dialog boxes.
2
A Page Description Language (PDL) specifies the contents and layout of a
printed page. In Device Settings, you can choose from PCL XL, (Printer
Command Language XL), PCL 5c, KPDL (an emulation of PostScript printing),
or PDF (Portable Document Format). The printer default is PCL XL, which is
suitable for most printing purposes. When using the XPS driver in Windows 7
and Windows Vista, XPS is the only PDL selection. After you select a PDL, the
selection appears in the lower corner of the Preview image.
In GDI compatible mode, vector graphics are rasterized for printing as bitmap
images. Use the GDI compatible mode option to improve the output quality of
the graphic created by the application.
Note: To add PDF to the list of PDL choices, you must install the Output to
PDF plug-in.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
The PDL options, available in the PDL Settings dialog box, are accessed in
Device Settings.
PCL XL
The most recent version of HP PCL and PCL 6. This PDL includes PCL 5c
features. PCL XL lacks backward compatibility with earlier PCL versions,
though it is enhanced over PCL 5c in these areas:
Reduced file size
Better print speed
Faster return to application
PCL 5c
Fully compatible with earlier PCL versions
Bidirectional communication support
Wide selection of fonts for use with Microsoft Windows applications
Complex graphics might not print as well
KX DRIVER
2-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
KPDL
KPDL is used when printing from applications that support PostScript 2 or 3.
An emulation of PostScript printing
Strong graphics reproduction
Print speeds may be slower than PCL 5c
Requires more printing system memory than PCL 5c
Enables native TrueType font downloading
Supports most Graphics settings options
PDF
Output to PDF is a plug-in feature that lets you print and save documents from
multiple sources to Adobe PDF. This feature can be used as an alternative to
existing commercial applications for creating PDF documents. Documents
saved as PDF retain their original appearance, and can be viewed and printed
with Adobe Reader on Windows, Mac OS, and UNIX platforms.
For a document using mixed paper sizes, all pages in the PDF use the size of
the first page.
Note: With PDF selected in the PDL Settings dialog box, only a limited set of
driver options are available.
When you click the Settings button, the available options are:
PCL XL Settings or KPDL Settings
Enable smart duplex printing
This option automatically keeps a sheet of paper from being sent through the
duplex unit if the sheet will only be printed on one side. The duplex unit will
be bypassed for the following types of print jobs: a one page document, one
page from a multi-page document, or a multi-page document that prints onto
a single sheet. Selecting this option can reduce wear on the mechanical
duplex unit, and result in comparatively faster printing times.
PCL XL Settings
Skip printing blank pages
This option prevents the printing system from outputting any page that
contains no data, or that has, at most, one space character. Selecting this
option can save paper, and result in comparatively faster printing times. This
feature is for regular printing (not for booklet, duplex or multiple pages per
sheet).
KPDL Settings
Allow data passthrough
This option reduces errors when printing complex jobs from applications that
use PostScript formatting. When selected, EMF spooling is not available in
the Advanced tab.
PDF Settings
Provides options for printing and saving documents to Adobe PDF format.
See PDF topics for details.
User Guide
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
You can select a page description language from PDL options.
In Device Settings > PDL > PDL Settings, select the desired page description
language from the Select PDL list.
1
2
3
You can select the GDI compatible mode option to improve the output quality
of graphics created by your application.
Select Settings when the PDL is set to PCL XL, KPDL or PDF.
If you select PCL XL, you can select Skip printing blank pages and Enable
smart duplex printing.
If you select KPDL, you can select Allow data passthrough and Enable
smart duplex printing.
If you select PDF, you can select from the available PDF Settings.
Click OK in the PDL Settings and Properties dialog boxes.
4
You can select PDF options if you have installed the Output to PDF plug-in.
The PDF Settings dialog box contains the following options:
PDF Settings
Embed fonts
This option ensures that document fonts appear accurately in the PDF file on
screen. This option ensures accurate reproduction but significantly increases
the file size.
Compress data
This option enables flat compression for the generated PDF document. This
option significantly reduces the file size. Additional compression options are
available within Adobe Acrobat.
Security
This option applies encryption to the PDF document. Click Settings for
additional Security settings. See the next section for details.
Print and save
This option lets you print and save a document as a PDF file. Click Settings
for additional Print and save settings.
Security Settings
This option lets you select an encryption level and create passwords for the
generated PDF file.
The following security options are available:
Encryption
Encryption provides password protection so that a document cannot be opened
or altered by unauthorized users.
Arc4 40
This encryption option provides low level security for a PDF document. This
option supports Adobe Acrobat and Adobe Reader 6.0, or later.
KX DRIVER
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Arc4 128
This encryption option provides low level security for a PDF document. This
option supports Adobe Acrobat and Adobe Reader 6.0, or later.
AES 128
This encryption option provides high level security for a PDF document. This
option supports Adobe Acrobat and Adobe Reader 7.0, or later.
AES 256
This encryption option provides high level security for a PDF document. This
option supports Adobe Acrobat and Adobe Reader 9.0, or later.
Passwords
Select passwords for changing security settings and for opening a document.
Passwords are supported to a maximum of 16 characters in length.
Require password to change security settings
Type an Owner password. Within Adobe Acrobat, this password is required
to change the document restrictions in the Files > Properties > Security
section. When a document with this password is opened in Adobe Reader, it
cannot be printed or edited, and document data cannot be copied.
Require password to open document
Type a User password. The user password must be entered at the time the
PDF document is opened. This password must be different from the owner
password.
Print and Save Settings
This option lets you print and save a document as a PDF file.
Save to file only
A PDF file is created and saved locally.
Save to file and print
A PDF file is created, saved locally, and sent to print.
After you select between these two options, you can choose the following
option:
Automatically save to default file
A PDF file can be saved automatically as a default file to be used again.
You can then select from the following options:
Replace default file
This option replaces an existing file having the default file name KxPdf.pdf.
Use default file + date and time
This option lets you use the default name and add a date and time stamp
each time the document is saved.
Default file directory
This option lets you browse to a location to save your PDF.
You can print a document and save it to Adobe PDF, if you have installed the
Output to PDF plug-in.
In Device Settings > PDL Settings, in the Select PDL list select PDF.
1
User Guide
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Click Settings.
2
3
4
In the PDF Settings dialog box, select Print and save.
Click Settings, and select from print and save options. See the PDF Options
topic for details.
Click OK in all dialog boxes.
Open and print the document.
Name and save the PDF file.
5
6
7
In Windows 7 and Windows Vista, the XML Paper Specification (XPS) Page
description language provides the most efficient method for displaying,
processing, and printing documents. As both a PDL and a document format,
XPS requires compatible printer hardware and software written for the Windows
Presentation Foundation (WPF) architecture. PCL and KPDL are not
compatible with an XPS environment. Therefore, an XPS driver supports a
single PDL setting. The XPS driver can be installed from the Product Library
disc. In the Installation Method menu, click Custom Mode, and on the
Custom Installation page, select KX XPS DRIVER.
To view a print to file XPS document, download and install the Microsoft XPS
Viewer.
Compatibility Settings lets you specify media source values and override the
application's Collate setting, and combine the Source and Media type lists in
the Basic tab.
In a client/server environment, this feature is unavailable to a client logged in as
a restricted user.
Media source enumeration supports compatibility for media source values
unique to the printer driver, such as those for cassettes or feeders. Your newly
installed printer driver maintains identical media source support with the driver it
replaces, whether for this driver or one from another manufacturer. If media
source macros exist for the older driver, then the alignment of media source
values maintains support without the need to change the macros.
Use the Driver Info utility (\Utility\Driver Info\DrvInfo.exe) to compare the
source values for all installed drivers.
If the values for a given media source differ between printer drivers, you can
reassign an enumerated value to create a match between the drivers.
In Device Settings > Compatibility Settings, from the Media source
enumeration list select the paper supply method. The current value is listed in
1
the Enumerated value box.
KX DRIVER
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
Type an Enumerated value for the media source, and click Apply. To align
settings with a different driver, this value should align with those in the other
driver.
2
3
Click OK in the Compatibility Settings and Properties dialog boxes.
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
This option bypasses the Collate setting in software applications, and gives
priority to the printer driver setting.
With the check box selected, the printer driver Collate setting is used.
With the check box cleared, the application Collate setting is used.
You can ignore the collation setting in the application and use the printer driver
collation setting.
In Device Settings > Compatibility Settings, select Ignore application
collation.
1
Click OK in the Compatibility Settings and Properties dialog boxes.
2
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
You can change the driver's Basic tab so that Media type and Source are
combined into one list, labeled Source. In the combined list, Media types are
listed first, followed by cassettes and MP tray.
You can combine the Source and Media type lists in the Basic tab to make
one Source list.
In Device Settings > Compatibility Settings, select Combine source and
media type lists.
1
Click OK in the Compatibility Settings and Properties dialog boxes.
2
You can restore all the options in Compatibility Settings to the default by
clicking Reset.
You can remove an installed plug-in from the driver. If removed, the plug-in
features do not appear in the driver interface.
Note: To remove the Output to PDF module, PDF must not be selected in
the PDL Settings dialog box.
User Guide
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Settings
In Device Settings, click Kyocera logo > Plug-in.
Select a plug-in module from the list and click Delete, then Yes.
Click OK in all dialog boxes.
1
2
3
KX DRIVER
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Quick Print
In the Quick Print tab, you can apply basic print settings to print jobs. Any
Quick Print settings can be saved as a group, called a profile, and applied to
any print job. Profiles support common printing tasks.
The administrator can set the view of the Quick Print tab through the
Installation process, or Administrator Settings in Properties.
This chapter can be used as a separate Quick Print user guide when KX Driver
support is controlled by an administrator.
You can set one or more print options on the Quick Print tab. You can create
your own customized view of print options with Edit Quick Print. And you can
also select from profiles that have been set with predefined options for
frequently run print jobs.
The upper section of the Quick Print tab has several icons that represent the
most common options for print jobs. Click on the Quick Print icons to change
settings for the print job. Some of these options also appear on the Basic,
Layout, and Imaging tabs.
Orientation
This icon changes between portrait, landscape, portrait rotated, landscape
rotated printing formats.
Color Mode
User Guide
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
This icon changes between color and black and white printing.
Collate
This icon changes the ordering of the printed pages. The page ordering
sequence can either be 123, 123, or 111, 222 and so on. You can also
reverse the order of the printed pages (321, 321) by selecting the Reverse
check box in the Basic tab. (Reverse is available only when Printer default
is not selected in Basic > Destination.)
Print on both sides
This icon changes between duplex printing for flipping on the long edge,
duplex printing for flipping on the short edge, or for not using duplex printing.
Multiple pages per sheet
This icon changes between Off, 2, and 4 for the number of pages printed on
one sheet. For more than 4 pages per sheet, define these settings in Layout
> Multiple pages per sheet.
Edit Quick Print
This button lets you select the print option icons to display and in what order
when you access the Quick Print tab. The Edit Quick Print button is not
available when the driver is accessed from an application’s Print dialog box.
Any basic print options can be Reset to the default values in the Quick Print
tab. This button only appears when it is accessed from an application’s Print
dialog box.
The following sections describe some of the Quick Print tab options in more
detail. Color Mode and EcoPrint can be found in the Basic and Imaging tabs.
Collate, and Duplex printing can also be found in the Basic tab. Multiple
pages per sheet in the Layout tab. The Profiles options are accessed from
Printing Preferences.
Color mode lets you choose full-color printing (CMYK) or printing with black
toner only. When the selection appears in color, all color settings in the driver
are enabled. Color cannot be chosen if Black & White mode is selected in the
Device Settings > Administrator Settings > Lock Settings.
Collate specifies the order in which the pages of a multiple copy job are printed.
With Collate selected, the first time the print job is sent to the printing system
the data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document output as pages one through five in succession,
three times.
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
Duplex printing is printing on both sides of each page. Select Print on both
sides to start duplex printing. The printing system contains a duplex unit that
KX DRIVER
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
turns the paper over to allow printing on the reverse side. Print on both sides
must be selected to print on both sides of the cover and insert pages.
Flip on long edge
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
Multiple pages per sheet prints several pages on a single sheet of paper for
the purpose of reviewing the document and conserving paper. The size and
readability of the multiple pages decrease as the number of pages per sheet is
increased. You can set the arrangement of the pages from the Layout tab as
well as print borders around each of the pages.
When Multiple pages per sheet is selected, Poster, Scaling, and Full bleed
are unavailable.
The assortment of icons at the top of the Quick Print tab can be customized to
include features that you use most often. Any number of icons from 0 to 5 can
be displayed. All icons can be removed from view if you want to use only the
Profiles options in the Quick Print tab.
The number of available features depends on the printing system model. If a
feature, such as Staple, is added to the Quick Print tab but a finishing device is
not installed, the icon appears as unavailable. Once the device is installed and
selected in Device Settings, the icon becomes active.
Note: An administrator can hide the Edit Quick Print button by selecting
Hide Edit Quick Print control in Device Settings > Administrator Settings.
The Edit Quick Print button is unavailable when the driver is accessed from an
application’s Print dialog box.
You can select from a limited set of driver features to appear in the Quick Print
tab.
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista), or Printers and Faxes (Windows
1
XP).
Right-click on the desired printing system model and click Printing
Preferences.
2
Select the Quick Print tab.
3
Click Edit Quick Print.
4
To add a feature to the Quick Print tab, select the feature under Available
controls, and click the right arrow to move the feature to Selected controls.
A maximum of 5 features can appear under Selected controls.
To remove a feature from the Quick Print tab, select the feature under
Selected controls, and click the left arrow to move the feature to Available
controls. To use only the Profiles in the Quick Print tab, move all features
to Available controls.
User Guide
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
Click the up and down arrows to change the position of the features under
Selected controls. The feature at the top appears on the left in the Quick
Print tab.
To restore the list to factory default options, click Reset.
After making your selections, click OK.
5
In Profiles, you can save printer driver settings as a profile. You can select
multiple options in any Printing Preferences tab, save them to a profile, and
use all of them at once when you apply the profile. The profiles list always
includes a Factory Default profile that returns the driver options to their default
settings. The profiles can include Common Profiles, which are installed as
optional components through the Optional Printer Components, and any
custom profiles created. A maximum of 26 profiles can be established in one
driver, including the Factory Default profile. Settings made in Device Settings
cannot be saved to a profile.
You can select and apply a profile from the Quick Print tab or from the Profiles
dialog box.
Quick Print tab
From Profiles, select a profile.
1
Click Apply. The side panel displays the options for that profile using an icon
and a summary.
2
Click OK.
3
Profiles dialog box
In any of the Printing Preferences tabs, click Profiles.
1
In the Profiles dialog box, select a profile.
2
Click Apply. The side panel displays the options for that profile.
3
Click OK.
4
The Save button lets you create your own profiles. You can select the printing
options you want in the driver, then save the driver settings including your
customizations as a profile. You can then use that profile to print the same type
of print job again without having to reselect all the settings. In Printing
Preferences, the Profiles button appears at the bottom of all the tabs.
Set the printing options you want for your print job by opening Printing
Preferences and selecting all your driver settings.
1
KX DRIVER
3-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
Click Profiles > Save.
2
3
4
To identify the profile, type a Name, select an Icon, and type a Description.
Click OK to save the profile.
The newly added profile appears in the Profiles dialog box.
Click Apply to use the selected profile for the current print job, or click OK to
close the dialog box.
5
Note: To reset the printer driver to default settings, select the Factory Default
profile, and click Apply. This clears the settings of a selected profile.
You can remove a profile by selecting it in the Select profile list and clicking
Delete.
The Edit button lets you make changes to an existing profile. The Factory
Default profile cannot be edited.
Click Profiles.
1
In the Select profile section, select the profile to be edited, and click Edit.
2
Any of the three options can be edited: name, icon and description. Click OK to
save the edited changes.
3
The newly edited profile appears in the Profiles dialog box.
Click Apply to activate the selected profile to the current print job, or click OK to
close the dialog box.
4
The Import button lets you import a copy of a profile from other printer drivers
into your printer driver.
Click Profiles > Import.
1
Browse for the existing profile (.KXP), select it, and click Open.
2
A message appears if any of the profile settings in the imported file are
unavailable in the existing driver. Select Yes, to import the profile, or No, to
cancel the import.
If you selected Yes in the previous step, the newly imported file appears in the
Profile dialog box.
3
Click Apply to use the selected profile for the current print job, or click OK to
close the dialog box.
4
User Guide
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
The Export button lets you export a copy of a profile from your printer driver for
use in other printer drivers. The Factory Default profile cannot be exported.
Click Profiles.
1
2
3
4
In the Select profile section, select the profile to be exported, and click Export.
The Export Profile dialog box appears. Name and save the profile.
Click OK to close the Profiles dialog box.
An administrator can associate a profile with an application so that all printing
from the application uses the same profile settings. This makes profiles easier
to use and ensures consistent printing from an application. For example, a
duplex printing profile can be applied to all spreadsheet printing to save paper,
or reports in Microsoft Word can be set to print with consistent stapling and print
quality.
Associations between profiles and applications can be created at any time in the
Profiles dialog box. To use the associations in printing, the feature must be
turned on in the Administrator Settings dialog box, accessed from Device
Settings.
A maximum of 25 associations can be created in the Application Based
Printing dialog box, accessed from the Profiles dialog box.
In a client/server environment, clients can view details about server
associations but cannot change settings or select another profile.
Once profiles have been created or imported, you can create an association
between a profile and an application. Then the application always prints using
the associated profile settings.
In any tab, click Profiles to open the Profiles dialog box.
1
Click Application to open the Application Based Printing dialog box.
2
Click Add to open the Add Association dialog box.
3
Enter a name for the association, to a maximum of 31 characters.
4
Under File name, enter a valid executable file name (.EXE) for an application
that allows printing, or browse to find a file located on your computer.
5
Select a profile from the list.
6
Click OK in the Add Association and Application Based Printing dialog
boxes to create the association.
7
You can remove an association by selecting it and clicking Delete.
KX DRIVER
3-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Print
You can change the name, file, and profile for an association.
In any tab, click Profiles to open the Profiles dialog box.
1
Click Application to open the Application Based Printing dialog box.
2
Select an association to edit and click Edit to open the Edit Association dialog
box.
3
Change desired settings under Association name, File name, or Profile.
4
Click OK in the Edit Association and Application Based Printing dialog
boxes to save the revised association.
5
User Guide
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Basic
In the Basic tab, you can specify the most commonly used printer driver
settings.
The Basic tab contains several settings for the most commonly used printing
tasks.
Print size
This setting sets the size of the area that the printer prints to, regardless of
the actual paper size that is used by the printing system.
Source
This setting specifies the cassette or tray that the printing system draws
paper from. Unless you are using a custom paper type, you can leave it set
to Auto source selection.
Page Sizes
This setting should match the page size setting in your application. The
printing result is based on the page size specified in this setting. You can
also create a custom page size.
Media type
This setting selects the Source based on the types of media that are
specified in the printing system. In general, you can leave it set to
Unspecified.
Destination
This setting specifies which output tray is used for the print job output.
KX DRIVER
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
Orientation
These settings specify the paper orientation of the print job. If Rotated is
selected, the print job orientation is rotated 180 degrees.
Copies
This setting specifies the number of copies to print. For collating multiple
copies, select Collate. If Reverse is selected, the printed pages appear in
reverse order. Reverse is available when Printer default is not selected
under Destination in the Basic tab.
Duplex
These settings enable printing on both sides of a sheet of paper.
Color
This setting specifies Full color or Black & White printing. You can also
select the EcoPrint check box to make the entire image, text and graphics,
appear lighter in the printed job. If you select EcoPrint, you can save toner
by moving the Toner save level slider in the Imaging tab from the left (least
amount of toner saved) to the right (most amount of toner saved). EcoPrint
does not increase print speed.
Print Preview
This setting lets you view your document before printing.
Note: Some applications may override print settings made in the driver.
Usually the application can be set to follow the settings. In Microsoft Word
2007, ensure that Default tray in Options is set to Use printer settings.
In the Basic tab, Source specifies which tray or cassette the printer uses for a
printing job. The default is Auto source selection, which instructs the printer to
search for the media requested by the application or the printer driver. If the
selected tray or cassette empties during a print job, then the printer searches for
another source, and continues the job.
Media type instructs the printer to search for the type of paper or media that is
requested by the application or the printer driver. The choices shown may
change depending on the selection in Source. If Auto media selection is
selected, then the printer searches for another tray or cassette using the same
media.
Transparencies, labels, and envelopes must be supplied from the MP tray.
Ensure the paper is properly loaded by following the instructions outlined in the
printing system's Operation Guide.
Note: Source and Media type are separate items in the dialog box, but can
be combined using the Combine source and media type lists setting in
Compatibility Settings. If they are combined, Media type is not available on
the Basic tab. To change this setting, open Device Settings > Compatibility
Settings and clear the Combine source and media type lists selection.
Print size controls the output page size of the document. To use this setting,
ensure that the Page Sizes setting matches the page size setting in your
application. If the Print size is different from the page size in your application,
then each page is enlarged or reduced to match the Print size. The percentage
value shown in brackets indicates the size of the Print size setting relative to
User Guide
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
the Page Sizes setting. If the Page Sizes does not match the page size setting
in the application (the size of the original) then, in most cases the Print size is
ignored and the document is printed based on its original size.
You can create a page size with your chosen dimensions for printing on non-
standard size paper. For example, you can create a custom banner with a
height from 5.82 inches (148.0 mm) up to 48.00 inches (1220.0 mm) and a
width from 3.85 inches (98.0 mm) up to 12.00 inches (304.8 mm). You can then
save the custom setting to the Page Sizes and Print size lists for later
selection.
To use custom page sizes, they must be created and added to the Print size
list. The driver supports a maximum of twenty custom sizes.
In the Basic tab, click Page Sizes.
1
Click New.
2
A default custom name appears in the Name box. Type a name for your custom
page size.
3
Type or select values for the height and width. If the height or width value
exceeds the allowable limit, it automatically adjusts to the limit after Apply or
4
OK is clicked.
When done, click Apply.
5
The custom page size appears in the Print size list, which is used for enlarging
and reducing the sizes of prints.
To delete a custom page size from the Page Sizes dialog box, select the name
of the custom page size and click Delete.
You can print on custom-sized pages.
Load custom-sized paper into the MP tray.
1
In the Basic tab, select the name of your custom page size in the Print size list.
2
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
Duplex printing is printing on both sides of each page. Select Print on both
sides to start duplex printing. If it is not selected, then the printer prints on only
one side of each page. The printer system contains a duplex unit that turns the
paper over to allow printing on the reverse side. Print on both sides must be
selected to print on both sides of the cover and insert pages.
Flip on long edge
KX DRIVER
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
Turn the long edge of the page to view the content.
Flip on short edge
Turn the short edge of the page to view the content.
Flip on long edge
Flip on short edge
You can print on both sides of each page.
In the Basic tab, select Print on both sides.
1
Select either Flip on long edge or Flip on short edge.
2
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
Collate specifies the order in which the pages of a multiple copy job are printed.
With Collate selected, the first time the print job is sent to the printing system
the data is rendered as page images in the printing system's memory. The
remaining job copies are printed from the stored data. This avoids the extra
processing involved in sending every copy from the computer to the printing
system.
User Guide
4-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
With Collate selected, the driver prints the complete job set by set. With Collate
cleared, it prints each page by set. For example, with Collate selected, three
copies of a five-page document output as pages one through five in succession,
three times.
The printer driver automatically overrides the application's Collate setting and
uses the printer driver setting. You can use the application's Collate setting by
clearing the Ignore application collation check box in the Compatibility
Settings dialog box accessed from Device Settings.
When printing multiple copies of a multiple page document, the printer can
assemble the pages of each copy in numerical order.
In the Basic tab, select the Collate check box.
1
Type or select the number of complete sets of the print job in the Copies box.
The document page count must not exceed the printer tray capacity.
2
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
The options in Color let you choose full-color printing or printing with black toner
only.
Full color
This mode prints four-color text and graphics.
Black & White
This mode prints with black toner only, making all color settings unavailable.
EcoPrint makes the entire image, text and graphics, appear lighter in the
printed job. EcoPrint does not increase print speed.
Full color, Black & White and EcoPrint also appear in the Quick Print tab and
in the Imaging tab. Changes in Quick Print, Basic, or Imaging tabs are
replicated to another tab if the same feature appears there.
After selecting driver settings, you can use Print preview to check the print job
before you proceed with printing. If you are satisfied with the preview, you can
print. Or you can cancel printing if you want to change driver settings.
You can see a print preview before printing.
Select desired driver settings in all tabs, or select a profile.
1
In the Basic tab, select Print preview.
2
Click OK in the Printing Preferences and Print dialog boxes.
3
KX DRIVER
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic
When the Print preview dialog box appears:
4
Click the arrow buttons to view document pages.
To close the preview and make additional changes in driver settings before
printing, click the “X” button.
If you are satisfied with the preview, click the printer button to print the job.
The Kyocera logo appears on the bottom portion of any Printing Preferences
screen or Device Settings screen. Click the logo to open the About dialog box
that displays the driver version number and driver plug-in information.
In Device Settings or any tab, click Kyocera logo > Version to view the
following driver information:
File Name
Version
Description
Date
Manufacturer
Comments
To view copyright information, click Legal Notices.
Click OK to close the driver information dialog boxes.
A plug-in integrates with the printer driver to extend the driver’s capabilities.
In Device Settings or any tab, click Kyocera logo > Plug-in to view the
following plug-in information:
Module
Description
Version
Click OK to close the driver information dialog boxes.
User Guide
4-6
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Layout
In the Layout tab, you can arrange document data on printed pages without
affecting the original document.
Multiple pages per sheet prints several pages on a single sheet of paper for
the purpose of reviewing the document and conserving paper. The size and
readability of the multiple pages decrease as the number of pages per sheet is
increased. You can set the arrangement of the pages from the Layout tab as
well as print borders around each of the pages.
When Multiple pages per sheet is selected, Scaling, Full bleed, and Poster
are unavailable.
You can print several pages on a single sheet of paper.
In the Layout tab, select Multiple pages per sheet.
1
In Pages per sheet, select the number of pages to print on each sheet of paper.
2
If you want to print a border around each page, select Print borders.
3
In the Layout list, select the direction the pages should flow.
4
KX DRIVER
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout
Click OK to return to the Print dialog box.
5
6
Click OK to start printing.
Scaling increases or decreases text and graphics on a page. You can also
select a gutter setting in the Finishing tab that enlarges the margins to
accommodate stapling or hole punching.
When Scaling is selected, other Layout tab options are unavailable.
You can increase or decrease text and graphics on a page.
In the Layout tab, select Scaling.
1
Type or select a percentage between 20 to 500.
2
Scaling adjusts proportionately the height and width of the page. A lower
percentage reduces the page and a higher percentage enlarges the page.
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
Full bleed lets you produce full-page printing without any margins by printing to
a larger sized-paper than the original, and then letting you trim the edges.
Trimming the document after printing ensures that the toner has completely
covered the document to its edge. You can print booklets, posters, and other
marketing documents. This feature helps to create a more professional look by
allowing you to later crop, and zoom improving the focus of the document.
When Full bleed is selected, other Layout tab options are unavailable.
Selecting crop marks
You can use crop marks to trim the edges of your document. The crop marks
help guide you to accurately and evenly cut around your document.
None
Do not print any crop marks.
Corners
A set of crop marks is made in each corner of the page which lets you match
the lines from side to side and cut the page precisely.
Border
Creates a thin black border around the entire page. You can follow this
border to trim off any excess paper from your document.
When selecting Layout > Full bleed, the other features on the Layout tab, and
all the features on the Finishing and Publishing tabs are unavailable.
With Full bleed selected, Scaling is fixed at 100% regardless of the print size
and page size combination.
User Guide
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout
Ensure that Print size in the Basic tab, is larger than the page size. For
example, with Full Bleed selected, and in Basic > Paper, you select Print size
> Letter (100%) and Pages Sizes > Envelope #10, there will be a lot of white
space around the document for you to trim after printing.
You can print to the edge of your paper.
In the Layout tab, select Full bleed.
1
In Crop marks, select from: None, Corners, or Border.
2
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
Booklet prints a two-page layout on both sides of each sheet of paper. You can
fold and bind the booklet in the center. Folded booklets are half the size of the
selected paper. For example, if you select Letter in Basic > Paper > Print size,
the printed output can be folded into a 5.5 x 8.5 inch-size booklet.
When Booklet is selected, other Layout tab options are unavailable.
A different paper source can be selected for the booklet cover. To include a
cover on the booklet, select the Publishing tab, then select Cover mode.
You can print a booklet.
In the Layout tab, select Booklet, and one of the two binding options.
1
Bind: Left edge
This selection prints text that reads from left to right.
Bind: Right edge
This selection prints text that reads from right to left.
Click OK to return to the Print dialog box.
2
Click OK to start printing.
3
The Poster feature lets you create a document to a size that is larger than the
paper your printer can support. You can print a poster, or banner, up to 25 times
larger than the original document. Segments of the poster document are printed
on several sheets of paper and with the assistance of poster settings, you can
reassemble the sheets easily to create a poster.
Use Pages per poster to select the poster size in relation to the original
document size. Each option shows the number of sheets to be printed and the
maximum poster size.
KX DRIVER
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Layout
When Poster is selected, other Layout tab options are unavailable.
Note: Pages per poster displays the unit of measurement in inches or
millimeters. You can change the Units setting in the User Settings dialog box,
accessed from Device Settings.
Use Poster Settings to select options, in any combination to make it easier to
create a poster. These options print visual cues on the poster sheets that
provide help in cropping and assembling the pages.
Overlap edges
This selection duplicates the edges of document data on adjoining sheets.
Poster appearance is improved when the edges overlap slightly. Select the
check box, then type or select a value between 0.00 and 1.20 inches (0.0
and 30.4 mm). This option reduces the final poster size slightly.
Print crop marks
This selection prints a border at the edges of each poster sheet. You can
crop each sheet on the border before assembling the sheets. This option
ensures that data on adjoining sheets matches precisely.
Print assembly marks
This selection prints numbers at the edges of each sheet, matching numbers
on adjoining sheets. Assemble each sheet edge to the same numbered edge
on another sheet.
Use Print format to print a proof sheet, along with the poster, to guide you in
assembling the printed poster sheets.
Poster pages
This selection prints all of the sheets to be assembled as a poster.
Proof sheet
This selection prints all the poster pages on one sheet with markings that
display the sheet assembly.
Poster pages and proof sheet
This selection prints all poster sheets and a one-page proof sheet.
You can print a poster.
In the Layout tab, select Poster.
1
In Pages per poster, select the poster size. Each option describes the number
of sheets it takes to represent one finished poster page.
2
Click Poster Settings to select options in any combination. These options aid in
the precise assembly of the pages to create the poster.
3
In Print format, select an option for printing your poster or proof sheet.
4
Click OK to return to the Print dialog box.
5
Click OK to start printing.
6
User Guide
5-4
Download from Www.Somanuals.com. All Manuals Search And Download.
KX DRIVER
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Finishing
In the Finishing tab, you can specify document finishing features such as
separating sets of printed jobs, creating bi-fold or tri-fold documents, creating a
gutter, stapling and punching holes.
The Separation feature stacks print jobs so that one print job can be
distinguished from another. There are two Separation methods: Rotate Copies
and Offset Jobs.
Rotate copies stacks each copy of a print job at a right angle in the output tray.
This feature requires the following:
Paper size selections are limited to Letter, A4, 16K, or B5 (JIS).
The selected paper size must be loaded into two paper sources, one
horizontally and one vertically.
The print job must contain multiple pages and be specified to print multiple
copies.
You can stack each copy of a print job at right angles in the output tray.
In Basic > Destination, select an option that is not a finishing tray, for example:
Printer default.
1
User Guide
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
Select a number of copies greater than 1.
In Finishing > Separation, select Rotate copies.
Click OK to return to the Print dialog box.
Click OK to start printing.
2
3
4
5
The Offset jobs feature physically shifts each print job in the output tray.
To ensure consistent offset stacking, all users printing to the same printing
system should select Offset jobs as the default setting.
The Offset jobs feature requires a finishing device to be selected under Device
options in Device Settings. It does not work with the Staple or the Finishing
edge features.
You can offset, or shift each print job in the output tray.
In Basic > Destination, select an option that is available for the finisher you
selected in Device Settings > Device options. Selections vary according to
printing system model.
1
In Finishing > Separation > Offset jobs.
Click OK to return to the Print dialog box.
Click OK to start printing.
2
3
4
The Bi-Fold feature lets you produce a document folded in half, like a brochure
or a pamphlet. Printing occurs on the outside of your document. You can also
select the number of pages produced as output.
With a folding unit installed, you can create a folded document.
In the Finishing tab, select Bi-Fold.
1
In Number of sheets, type or select the number of sheets that will be folded in
half, up to a maximum of 5.
2
Click OK.
3
The Tri-Fold feature lets you produce a document folded into thirds, like a
brochure or a pamphlet. You can choose to print on the inside or the outside of
KX DRIVER
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
your document. You can select the direction of the folds. You can also select the
number of pages produced as output.
With a folding unit installed, you can create a folded document.
In the Finishing tab, select Tri-Fold.
1
In Print Side, select one of the two options:
2
Inside
This selection prints on the inside of the folded document.
Outside
This selection prints on the outside of the folded document.
In the Direction of fold, select from the options available.
3
Left to right/Top to bottom
By selecting this option for Portrait, the printer first folds the top third and
then the bottom third of the page. For Landscape, the printer first folds the
left third and then the right third of the page.
Right to left/Bottom to top
By selecting this option for Portrait, the printer first folds the bottom third and
then the top third of the page. For Landscape, the printer first folds the right
third and then the left third of the page.
In Number of sheets, type or select the number of sheets that will be folded
into thirds, up to a maximum of 5.
4
Click OK.
5
Finishing edge aligns the matching sides of two different page sizes in a
document. For example, the long edge of an A4 page is aligned with the short
edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the
staple feature.
You can choose the position of staples in a document composed of mixed page
sizes. In contrast, if you are printing a mixed page size document without using
Finishing edge, staple positions depend on the paper size settings (portrait or
landscape) in the paper cassettes.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple.
Selecting Finishing edge makes some other features unavailable, such as
Separation and Rotated. Finishing edge cannot be used with the Poster
feature.
Finishing edge can be used with the following page size combinations:
User Guide
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
A4 and A3 (210 x 297 mm and 297 x 420 mm)
B5 (JIS) and B4 (182 x 257 mm and 257 x 364 mm)
Letter and Legal (8.5 x 11 in. and 8.5 x 14 in.)
Letter and Ledger (8.5 x 11 in. and 11 x 17 in.)
16K and 8K (197 x 273 mm and 273 x 394 mm)
You can align the matching sides of two different page sizes in a document.
In the Basic tab, set Print size and Page size to the same size.
1
2
3
4
In Basic > Source, select an Auto source.
In the Finishing tab, select Finishing edge.
Select from available Position options, or select Custom. Positions are based
on the Print size selection in the Basic tab.
Click OK in all driver dialog boxes.
5
6
Load each paper size into different paper cassettes. For example, load A4 and
A3 paper so that both sizes feed the 297 mm edge or load letter and legal paper
so that both sizes feed the 8.5 inch edge.
Click OK in the application’s Print dialog box.
7
If the printer driver determines that the specified paper size or direction (short or
long edge) is unavailable in the printing system, the operation panel message
requests that you load the correct paper size into the cassette with the correct
orientation.
You can select from available options to specify the page edges to be aligned
and finished. For additional position settings, select Custom, then click
Settings. Available options for Position depend on Print size, Orientation,
Booklet, and Multiple pages per sheet selections.
In the side panel display, the page image shows a blue highlighted strip to
indicate the current selected Finishing edge with Staple positions, if selected.
When the Staple option is used, the Position selection determines where
staples are placed. Use this image to verify your selections for Finishing edge
and Staple.
The illustrations in the Custom Finishing Edge Settings dialog box help you
visualize the page alignments. Select the one setting that best illustrates the
edge of the mixed pages you want to align.
To select Custom for Position, click Settings. In the Custom Finishing Edge
Settings dialog box, select one of the settings. The illustrations in the dialog
box help you visualize the page alignments.
In the Custom Finishing Edge Settings dialog box:
KX DRIVER
6-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
The top two settings (A4/Letter) are for the smaller size paper in the mixed
page document.
The second row of settings (A3/Legal/Ledger) is for the larger size paper in
the mixed page document.
Note that a change to one custom Finishing edge setting adjusts other
selections to make them compatible with the change.
A gutter creates additional blank space on the left side and at the top of the
sheet. It is often used for binding, hole punch or stapling to make a print job
easier to read. Increasing the measurements in Gutter increases the margins
around your text and graphics on the left side, or top of the printed sheet. This
creates a larger margin space by shifting the printable area to the right, or down
as much as one inch (25.4 mm).
You can increase the margins on the left side and at the top of the printed sheet.
In the Finishing tab, click Gutter.
1
In the Gutter width options, type or select a value between 0.20 to 1.00 inches
(5.0 to 25.4 mm).
2
Short edge (top)
This selection modifies the outside margin on the top-edge of the page.
Long edge (left)
This selection modifies the outside margin on the left-side of the page.
Note: Availability of Gutter settings vary depending on Finishing edge
settings, and Orientation and Duplex mode settings in the Basic tab.
If text extends too close to the edge of the page, select Reduce image to fit.
3
The text appears slightly reduced and away from the edge of the page. If text
does not extend beyond the page when the gutter increases, clear Reduce
image to fit.
Click OK to return to the Print dialog box.
4
Click OK to start printing.
5
The Staple feature lets you create stapled document sets. You must first select
a finisher under Device Settings > Device options. Selecting the Staple
feature makes Separation and Transparency interleaving unavailable. The
maximum number of sheets depends upon the finisher model and the selected
Page size or Media type. The Gutter feature lets you increase the top and left
margins to accommodate the location of the staples.
Staple and Separation features cannot be used together.
If Printer default is selected as the Destination in the Basic tab, the selection
of an option in the Finishing tab results in the automatic selection of a
User Guide
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
destination compatible with that finishing option. The destination is
automatically updated to the first available output tray that supports the selected
finishing option.
Staple selects the Destination automatically. If the Finishing options are
changed, the Destination selection is not affected.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Staple.
The Staple feature in the Finishing tab enables you to create stapled
document sets. You must first select a finisher under Device options in the
Device Settings tab. Staple will make Separation and Transparency
interleaving unavailable. The maximum number of sheets depends upon the
finisher model and the selected Page size or Media type. The Gutter features
enables to increase the top and left margins to accommodate the location of the
staples.
In the Finishing tab, select Staple.
1
In the Staple feature, select Position and Count. Two options are available for
2
count: All sheets to a maximum number and every number of pages so that
each number set is stapled separately. The Position setting options vary based
on settings in Finishing edge, which provides custom staple locations in the
document.
Click OK to return to the Print dialog box.
3
Click OK to start printing.
4
The Punch feature places punched holes along the edge of the printed pages
so that the pages can be bound together or placed in a binder.
Punch is enabled when a finisher that supports punch is selected in Device
options in Device Settings. When you select the check box for a finishing
device shown in blue in the Device options list, the Punch Unit Settings
dialog box appears. If the device listing is already selected, double-click the
option to open the Punch Unit Settings dialog box.
Punch cannot be used when Booklet is selected in the Layout tab.
Finishing edge should be selected before any other features in the Finishing
tab. If set last, Finishing edge might change any settings that you previously
made under Punch.
The finishing device must support the Punch feature.
Available punch options are set in Device Settings and depend on the punch
unit installed on the device and selected.
In the Finishing tab, select Punch.
1
Select the number of hole punches.
2
KX DRIVER
6-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Finishing
Click OK to return to the Print dialog box.
3
4
Click OK to start printing.
User Guide
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Imaging
In the Imaging tab, you can manage print quality and color settings.
Print quality lets you select between High quality or Custom (EcoPrint).
In the Imaging tab, select a Print quality from the list.
High quality
Select this setting to print at the highest print quality.
Custom
Custom lets you choose a setting for EcoPrint. Selecting Custom without
EcoPrint results in a default setting to the highest print quality.
EcoPrint changes toner saturation in the printed job, making the entire print
image, including text and graphics, appear lighter. The amount of toner varies
based upon your printing system model and the type of data printed (text,
graphics, or both).
With EcoPrint selected, you can choose to save toner by moving the Toner
save level slider from the left (least amount of toner saved) to the right (most
amount of toner saved). EcoPrint does not increase print speed.
KX DRIVER
7-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
EcoPrint is also available in the Quick Print and Basic tabs. If EcoPrint was
selected in the Quick Print or Basic tab, the slider is positioned at the last
setting made.
In the Imaging tab, in the Print Quality list, select Custom.
1
2
3
Select the EcoPrint check box.
Select the level of toner used by the sliding the Toner save level bar. If no level
is selected, the default will be to the center of the bar.
Click OK.
4
In color printing, color inks or toners are applied separately to a page. A color
image has its component colors applied in color separations of cyan, magenta,
yellow and black. These color separations must be aligned (registered)
precisely to produce a quality full–color image. During printing, the paper or
media type may shift slightly. While the shift might be very small, the gaps
between the colors in the image can be noticeable. Color trapping corrects it by
overlapping colors slightly so that minor alignment issues are corrected.
To use trapping in a document, select a value for the print overlap pixel width:
Light, 0.5 pixel trapping; Medium, 1 pixel trapping; Heavy, 1.5 pixels trapping;
Very Heavy, 2 pixels trapping.
Note: Trapping is not available when PCL 5c or PDF is selected in the PDL
Settings dialog box.
Gloss mode simulates high-gloss copies by adding a glossy appearance to
printed text and images.
Note: When Gloss mode is selected, EcoPrint options are unavailable.
A computer font is a data file containing a set of glyphs (visual representations
of textual elements), characters, or symbols. Common terms for fonts are:
Outline fonts, in contrast to bitmap fonts, are defined as a set of
mathematical lines and curves. An outline font is more easily scalable
(designed to display and print clearly at any point size) than a bitmap font.
Bitmap fonts define each character as a pattern of pixels (the smallest
resolvable rectangular areas of an image). Such fonts are not easily scalable
and distort when reduced or enlarged.
Native fonts are the basic or original fonts installed with the computer
operating system. TrueType fonts are the native fonts used by Microsoft
Windows.
TrueType fonts are a type of scalable outline fonts. TrueType has long been
the most common format for fonts on Microsoft Windows.
User Guide
7-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
System fonts are the primary fonts used by the operating system. They are
typically accessed through an application interface or through a common font
dialog box.
Device fonts are stored either permanently or temporarily in the printing
system memory.
The Font Settings dialog box lets you specify how TrueType fonts are sent to
the printing system. The chosen method affects the speed and quality of the
print job:
Download as outlines
This method is best suited for large documents or print jobs using multiple
fonts and font sizes. Print speeds are faster because of the optimization
features in this setting. The repetition of similar font data sent to the printing
system is reduced, thereby increasing the print speed. Print speed is not
increased when using Asian fonts such as Japanese, Chinese, and Korean,
because of the large amount of font information used for these particular
fonts.
Allow native download
This method improves text quality and increases print speed by converting
TrueType fonts to Adobe Type 42 font format. This feature is available when
KPDL is selected in the PDL Settings dialog box.
Download as bitmaps
Downloading fonts as bitmaps provides more detail, however it creates large
file sizes. This is best suited for print jobs with custom fonts, very small fonts
(point size 1-4), or Asian fonts.
Substitute with device fonts
System fonts and device fonts are automatically matched based on typeface
name. This function increases print speed and efficiency. It is useful for
changing a font used throughout a large document, by replacing the old font
with the desired font.
Note: GDI compatible mode does not support Substitute with device
fonts.
You can specify how TrueType fonts are sent to the printing system.
In Imaging > Font Settings, select one of the methods for sending TrueType
fonts.
1
Click OK to return to the Print dialog box.
2
Click OK to start printing.
3
Font substitution is the process of using one font in place of another when the
intended font is not available to a printing system. Font substitution may be
critical for output of documents to printing systems that are not well supported
by a large font inventory.
KX DRIVER
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
You can use one font in place of another.
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista), or Printers and Faxes (Windows
1
XP).
Right-click on the desired printing system model and click Printing
Preferences.
2
In Imaging > Font Settings, select Substitute with device fonts, then click
Fonts.
3
In the Fonts Substitution dialog box, the System fonts list shows the fonts
installed on your computer. The Available device fonts list shows the printing
system fonts.
Select the system font, and then the available device font to be substituted.
4
Click OK to save your settings.
5
If the device font does not have similar font characteristics to the system font,
character spacing in the document may appear incorrect.
In some cases, the printing system substitutes fonts even if you send the
TrueType fonts as outline fonts or bitmap images. Select Disable device fonts
to prevent substitution of device fonts for TrueType fonts.
This option also improves portability of printable data. (If cleared, device fonts
may not match when sent to a different printing system.)
Some Adobe applications have device font limitations. To overcome these
limitations, select Disable device fonts. Device fonts are normally visible in the
application font lists as printer icons next to the font name, unless there are
equivalent system fonts, in which case the “TT” TrueType icon remains.
You can prevent substitution of device fonts for TrueType fonts.
In Imaging > Font Settings, select the Disable device fonts check box.
1
Click OK to save your settings.
2
Graphics are pictorial representations of information. Graphics can be functional
(charts, diagrams) or artistic (drawings, photographs). Graphics Settings let
you select options for your printed graphics.
Note: Some options are available only when a specific PDL is selected.
In the Imaging tab, click Graphics.
1
User Guide
7-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
In the Graphics Settings dialog box, select from the available options, and then
click OK to save your selections.
2
Pattern scaling is a feature that can help improve visual compatibility between
screen and print output. Graphics objects, such as a shape or a path, often
include patterns and fills that are composed of collections of printed dots. A
pattern is a planned or random repetition of colors, shapes, lines, values, and
textures to create a visual arrangement. A fill is the application of a color or
grayscale to a graphics object. If printed patterns and fills do not match the
appearance of that on the screen, use Pattern scaling to select a different
density of printed dots.
In the Imaging tab, click Graphics to open the Graphics settings dialog box
and access the Pattern scaling settings.
Auto (default setting)
This setting prints patterns and fills to match the on-screen appearance.
Coarse
This setting prints patterns and fills with the fewest number of lines, patterns,
or dots. Coarse is the same as Auto when PCL XL or PCL 5c is selected in
the PDL Settings dialog box.
Medium
This setting prints patterns and fills with a greater number of lines, patterns
or dots than the Coarse setting. Medium is the same as Auto when KPDL is
selected in the PDL Settings dialog box.
Fine
This setting prints patterns and fills with the greatest number of lines,
patterns, or dots. Printed patterns and fills may appear more dense than the
on-screen appearance.
Inversion is the opposite of the normal order, arrangement, or position of an
image or printed content.
In the Imaging tab, click Graphics to open the Graphics settings dialog box
and access the Inversion options. The settings are available when KPDL is
selected in the PDL Settings dialog box.
Reverse image
This setting prints images like a photo negative, reversing black and white
areas of the image.
Mirror print
This setting prints the page content backwards, as it would appear in a mirror
image.
Optimization is a process or methodology of improving a printing system's
function or effectiveness.
In the Imaging tab click Graphics to open the Graphics settings dialog box
and access the Optimization settings. The settings are available when KPDL is
selected in the PDL Settings dialog box.
Fast printing
KX DRIVER
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
This setting increases print speed and decreases spool size. It delivers
images in binary format. It can be used for most everyday printing needs.
Document portability
This setting creates a PostScript file in ASCII text encoding. Unlike the binary
format created in Fast printing, the ASCII text created with this selection
can be edited.
CIE optimization bypasses the normal procedure of processing every aspect of
the CIE color space used in applications such as Adobe Acrobat and
Photoshop. This feature increases print speed for documents printed from these
applications by optimizing CIE data. It has no effect on print jobs that do not use
CIE data. CIE optimization should be selected for speed not accuracy, so
printed output may be different from appearance on the screen.
In the Imaging tab, click Graphics to open the Graphics settings dialog box
and access the CIE optimization check box. CIE optimization is available
when KPDL is selected in the PDL Settings dialog box.
Image compression mode lets you select a method for compressing images
depending on the desired quality in printed images. JPEG compression
produces a lower quality image, while delta row compression produces a higher
quality image but creates a larger file size. Image compression mode is
available when KPDL or PCL XL is selected in the PDL Settings dialog box.
In Imaging > Graphics Settings, select from the following compression
options:
Smaller file size
Uses JPEG compression
High quality
Uses delta row compression
7-6
Color mode lets you choose full-color printing or printing with black toner only.
The following color modes are available:
Full color
This mode prints four-color text and graphics.
Black & White
This mode prints with black toner only, making all color settings unavailable.
Printer profile lets you optimize the color rendering of photos and graphics.
This feature is available when Full color is selected as the Color mode.
In Imaging > Printer profile, the following printer profiles are available.
Printer settings
This option uses the printer settings only.
Text and Graphics
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
This option is for printing documents that contain many graphs, charts or
drawings.
Text and Photos
This option is for printing documents with many photographic images.
Vivid colors
This option increases the color saturation of graphics and photos.
Publications
This option is for printing a mix of graphics and/or photos. Select this option
to print close to the color shade of the screen.
Line art
This option is for printing figures or graphics drawn with lines. Select this
option to print colored lines with pure simple color.
Custom table
This option lets you select a custom color table that was previously
downloaded to your printing system. All other Printer profile options use the
default color table.
Advanced
This option achieves greater consistency in color reproduction among
various devices. It compensates for the different color spaces of color
printing systems. Selecting and applying a set of profiles is called a color
profile. Select to open the Color Correction dialog box for additional color
printing options.
In Printer profile, the Advanced option provides some methods for controlling
how the printer processes color matching.
From Printer profile, select Advanced. The Color Correction dialog box
appears with the following options:
1
None (application corrected)
With this option, color data processes without applying the adjustments
contained in the printing system's internal color lookup tables. Ink simulation
will not be executed. This is useful if the application provides its own color
correction.
ICM (system corrected)
This option specifies color rendering in the print job to make it as close to the
original as possible. ICM technology relies upon associating an output
device like a printing system with a Color Profile. An ICM Profile for a printing
system contains information about rendering accurate color information for
that device. The settings for ICM must be set in the Color Management tab in
the printing system Properties.
If you select the None (application corrected) option, click OK to close the
Color Correction dialog box.
If you select the ICM (system corrected) option, proceed to step 2.
Select an option, then click OK to save the selection.
2
Optimize for exact color (Colormetric)
KX DRIVER
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
This option is for matching colors precisely in all print jobs, such as colors in
a corporate logo.
Optimize for color contrast (best for images)
This option optimizes for color contrast by adjusting contrast to preserve
detail throughout the tonal range. Select it for images or scanned
photographs containing many colors or shades of color.
Optimize for color saturation (best for graphs)
This option optimizes for color saturation by adjusting hue to preserve the
vividness of pure colors. Select for graphs or charts containing solid colors.
Click OK again to close the Color Correction dialog box.
3
When using the ICM (system corrected) feature in the Color Correction
dialog box, you can set a color profile for your printing system.
Windows 7 and Windows Vista
Click Start and click Devices and Printers (Windows 7), or click Control Panel
and double-click Printers (Windows Vista.)
1
Right-click on the desired color printer.
2
Click Printer properties (Windows 7), or click Properties (Windows Vista).
3
Select the Color Management tab and click Color Management.
4
In the Devices tab > Device list, select the desired color printer.
5
Select the Use my settings for this device check box.
6
In the Profile selection list, select Manual, and click Add.
7
In the Associate Color Profile dialog box, select an ICC profile, or click
Browse to find a profile, and click OK. The profile is added to the Profiles
8
associated with this device list.
Select the desired color profile and click Set as Default Profile.
9
Click Close.
10
Windows XP
Click Start, click Printers and Faxes.
1
2
3
Right-click the desired color printer.
Select Properties.
User Guide
7-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
Select the Color Management tab and click Add.
4
5
In the Add Profile Association dialog box, select a color profile from the list
and click Add.
In the Color Management tab, select Manual.
Select the desired color profile from the list and click Set as Default.
Click Apply.
6
7
8
Color Adjustment lets you customize the two color spaces in the driver and
save up to three custom groups. Color space changes can be made to hue,
saturation, and lightness (HSL) or to color balance levels.
Note: If different custom settings are selected in Color Adjustment and
Color Optimizer (Advanced tab), the latest change takes precedence and is
applied to the print job.
In a client-server environment, settings made by a client are saved in the client
computer for future use.
If a custom color setting has already been defined, you can select and apply it to
a print job.
In Imaging > Color mode, select Full color.
1
In the Adjustment list, select Custom 1, Custom 2, or Custom 3.
2
Click OK.
3
HSL controls adjust the full spectrum, brightness, contrast, and vividness of the
color.
In Imaging > Color mode, select Full color.
1
In the Adjustment list, select Edit.
2
In Adjustment Settings > Custom color adjustment, select Custom 1,
Custom 2, or Custom 3.
3
Select HSL (hue, saturation and lightness).
4
Under Select Preview image, click the icon to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
5
KX DRIVER
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
Adjust the distribution and balance of hues.
6
For coordinated hue adjustment, from the Modify list, select Master. Drag the
Hue slider to increase or decrease the value between -180 and +180.
For specific hue adjustment, from the Modify list, select Red, Yellow, Green,
Cyan, Blue, or Magenta. Drag the Hue slider to increase or decrease the value
between -10 and +10.
Drag each slider to adjust the Saturation, Lightness, and Contrast between -
10 and +10.
7
8
Click OK to save the new HSL settings.
Color balance adjusts only the relative values of the colors red, green, and blue
of RGB, or cyan, magenta, and yellow of Full color.
In Imaging > Color mode, select Full color.
1
In the Adjustment list, select Edit.
2
In Adjustment Settings > Custom color adjustment, select Custom 1,
Custom 2, or Custom 3.
3
Select Color balance.
4
Under Select Preview image, click the icon to select one of three different
images. Different colors are emphasized in each of the photographs to aid in the
color adjustment process.
5
Under each color bar, drag the slider to adjust the relative values of each color
between –10 and +10.
6
If you want to return all Color balance settings to zero, click Reset.
7
Click OK to save the new Color balance settings. The side panel displays these
new settings.
8
Color conversion lets you choose how to apply color processing to your print
job depending on how color data is received from the application. This feature is
available if KPDL is selected in the PDL Settings dialog box.
In Imaging > Color conversion, select from the following options:
Printer settings
Select this option to use the settings currently on the device.
Speed priority
Select this option if the driver receives RGB data from the application.
Quality priority
User Guide
7-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
Select this option if the driver receives full-color data from the application.
Black & White adjustment settings change the brightness and contrast of
graphics. These settings are useful if graphic images are printing too light, too
gray, or too dark. Text remains unaffected.
You can change the brightness and contrast of graphics.
In Imaging > Color mode, select Black & White.
1
In the Adjustment list, select Custom.
2
A preview image in the Adjustment Settings dialog box illustrates any
brightness and contrast changes.
Drag the Brightness slider right to lighten, or left to darken the graphic images
of the print job.
3
The brightest setting is +100; the darkest is -100. Zero is the default mid-level
setting. Adjusting brightness allows for the customization of graphic images if
images are printing too light or too dark.
Drag the Contrast slider right or left to increase or decrease the proportion of
light to dark in the graphic images of the print job.
4
A high contrast setting decreases the grayscale spectrum, making light grays
lighter and dark grays darker. A low contrast setting increases the grayscale
spectrum, making light grays darker and dark grays lighter.
The highest contrast setting is +100; the lowest is -100. Zero is the default mid-
level setting. Adjusting contrast is useful if graphic images are printing too gray,
or too black and white. Text remains unaffected.
Click OK to save the new Black & White settings.
5
Special settings are available for color or black and white printing.
Print text as black
This option prints all color text as black. It produces faster printing of color
print jobs by reducing the amount of data sent to the printer. In black and
white printing, it increases the detail for light-colored text printed. White text
and image colors are unaffected. Available with all of the Color mode
options.
Print grays with black toner
This option prints grayscale with black only. Full color must be selected as
the Color mode.
Continuous tone
Images are represented by a series of evenly graduated tones, as in a
photograph. Full color must be selected as the Color mode. Continuous
tone is selected automatically.
KX DRIVER
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Imaging
Print graphics as black
This option prints all color graphics with black, rather than grayscale. This
feature is implemented for CAD applications. Black & White must be
selected as the Color mode.
User Guide
7-12
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Publishing
In the Publishing tab, you can create covers and inserts for a print job, and add
backing sheets between transparencies.
Cover mode lets you add cover pages for the front and back of your document.
You can print on cover pages of a different weight or color than the main
document. The source of the cover paper is specified by adjusting the Media
for cover settings in the Publishing tab.
Print on both sides must be selected in the Basic tab or Quick Print tab in
order to print using the Front inside or Back outside options.
Although Cover mode and Page insert can be used simultaneously, they
cannot be used with Transparency interleaving.
You can choose cover pages for printing.
In the Publishing tab, select Cover mode.
1
Select Front or Front and back to specify the type of covers.
2
Select from Print onto options if you want to print on the covers.
3
Click OK to return to the Print dialog box.
4
KX DRIVER
8-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
Click OK to start printing.
5
Check Box Selection
Cover Insertion Type
Front
Inserts a blank front cover.
Front
Prints on the outside surface of the
front cover.
Front outside
Front
Prints on the inside surface of the front
cover.
Front inside
Prints on the outside and inside
surfaces of the front cover.
Front
Front outside
Front inside
— continued
User Guide
8-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
Check Box Selection
Cover Insertion Type
Inserts blank front and back covers.
Front and back
Prints on the outside surface of the
front cover and inserts a blank back
cover.
Front and back
Front outside
Prints on the inside surface of the front
cover and inserts a blank back cover.
Front and back
Front inside
Prints on both sides of the front cover
and inserts a blank back cover.
Front and back
Front outside
Front inside
— continued
KX DRIVER
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
Check Box Selection
Cover Insertion Type
Prints on the inside surface of the
back cover and inserts a blank front
cover.
Front and back
Back inside
Prints on the outside surface of the
back cover and inserts a blank front
cover.
Front and back
Back outside
Prints on both sides of the back cover
and inserts a blank front cover.
Front and back
Back inside
Back outside
Prints on both sides of the front and
back covers.
Front and back
Front outside
Front inside
Back inside
Back outside
You can select media for the cover.
User Guide
8-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
In the Publishing tab, select Cover mode.
1
2
In the Media for cover list, select the media type or source cassette for the front
and back covers. When you choose the media type, a source cassette matching
that media type is automatically selected.
Click OK to return to the Print dialog box.
3
4
Click OK to start printing.
A Page insert is a preprinted page or a page of a different paper type that is
inserted at specified points in a print job. The inserted page can also be printed
on during the print job. Both sides of the page insert can be printed on by using
the duplex unit.
Although Cover mode and Page insert can be used simultaneously, they
cannot be used with Transparency interleaving.
Several ways are available to arrange page inserts: you can print on one or both
sides or insert a blank sheet.
In Publishing > Page insert, select the option corresponding to your desired
page arrangement.
1
To print on both the front and back of the inserted page, select the Print onto
front and Print onto back check boxes.
2
In Insert before pages, type the page number to insert. A page is inserted
between the page number you typed and the page before it.
3
From the Media for page list, select the media type of the inserted page or the
source paper cassette. When you choose the media type, a source cassette
matching that media type is automatically selected.
4
Click OK to return to the Print dialog box.
5
Click OK to start printing.
6
KX DRIVER
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
Check Box Selection
Page Insertion Type
Page insert
Inserts a blank page.
Page insert
Prints on the front side of the inserted
page.
Print onto front
Page insert
Prints on the back side of the inserted
page.
Print onto back
Prints on both sides of the inserted
page.
Page insert
Print onto front
Print onto back
Transparency interleaving inserts a backing sheet between printed
transparencies. The backing sheet, also known as an interleaf, helps keep
transparencies clean and prevents them from clinging together. This feature is
User Guide
8-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Publishing
only available when printing on transparencies supplied from the MP tray. You
can print the same content on the backing pages as on the transparencies.
Transparency interleaving cannot be used together with Cover mode or
Page insert.
You can insert backing sheets between transparencies.
In Basic > Media type, select Transparency. If the Source and Media type
1
lists have been combined (by a selection in Device Settings > Compatibility
Settings), Media type does not appear. Instead, in the Source list select Auto
(Transparency).
Click Publishing > Transparency interleaving.
2
To print the transparency content on the inserted pages also, select the Print
onto backing check box.
3
In the Media for backing list, select the Media type of the backing sheet or the
Source paper cassette. When you choose the media type, a source cassette
4
matching that media type is automatically selected.
Click OK to return to the Print dialog box.
5
Click OK to start printing.
6
The printing system's operation panel prompts you to load transparencies into
the MP tray, and if necessary, load backing paper into the selected cassette.
KX DRIVER
8-7
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Job
In the Job tab, you can store print jobs in the memory installed in the printing
system. You can also select a Job name to use with Job storage features. You
can use this tab to set or change the default settings that apply when you print a
document from a Microsoft Windows application.
Job storage (e-MPS) offers a set of options for saving print jobs in printing
system memory, so that you can print or reprint them later. Print jobs can easily
be reprinted later using the printing system’s operation panel, and printing of
sensitive documents can be restricted to approved users.
E-MPS is a multitier solution that provides advanced print management, directly
from the desktop. By storing a job in the printing system, you can print it from
the operation panel without sending it again from the computer.
To use the Job storage (e-MPS) features, you must set a user name in the
User Settings dialog box, available in Device Settings.
Storage location
Access code
required
When job is
printed
When job is
deleted from
memory
Custom box
Hard disk
Optional password When printed from When manually
operation panel
deleted or up to 31
days
— continued
User Guide
9-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Job
Quick copy
Hard disk
Hard disk
Hard disk
Hard disk
No
When sent from the When printing
computer
system is turned off
or hard disk is full
Proof and hold
Private print
Job storage
No
One copy when job When printing
is sent; remaining
copies later
system is turned off
Yes
When access code When printing
is entered at
operation panel
system is turned off
or after printing
Optional
When printed from When manually
operation panel deleted
Custom Box lets you store print jobs until they are printed from the printing
system's operation panel. You can print one or more jobs from the hard disk.
Print jobs can be deleted after printing or saved on the hard disk for 1-31 days.
Custom boxes must be set up for each user at the printing system's operation
panel and in the Hard Disk Settings dialog box, accessed from Device
Settings. The maximum number of custom boxes is 1000.
After custom boxes are assigned, you can send print jobs to custom boxes,
where print jobs are stored on the printing system’s hard disk.
In the Job tab, select Job storage (e-MPS), then select Custom box.
1
Click Settings.
2
Select a Custom Box Settings option:
3
Select Use specific box number, and type the box number and password.
Select Prompt for box number, and click OK. When the Custom Box
dialog box appears, type a box number. If a password was set, type the
password.
Select Display box number list, and click OK. When the Custom Box
dialog box appears, select a box from the list. If a password was set, type the
password. This can be selected when Shared box is selected in the Hard
Disk Settings dialog box.
Select Verify box number for each login user, and click OK. When the
Custom Box dialog box appears, type a box number. To include a
password, select Require password and type the password. This can be
selected when Shared box is selected in the Hard Disk Settings dialog
box.
With Verify box number for each login user selected, the driver searches for
a login user name from the custom box list to serve as the custom box name:
If a match is found, the custom box is used for the print job.
If a match is not found, the driver checks for administrator or user
permissions. With administrator permissions, you will be prompted to type a
box number and optional password for the print job. The driver searches for
a Windows login user name and adds this name with the box number and
KX DRIVER
9-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Job
password to the custom box list in the driver. With user permissions, the print
job is canceled. You will be prompted to contact an administrator to establish
printing permissions.
Quick copy is a Job storage (e-MPS) option that prints all copies of a print job
and stores the job temporarily on the hard disk for reprinting later. This feature is
available when a hard disk is installed and selected in Device Settings.
Quick copy is useful for printing the job again later in the day when you need
additional copies at short notice. You can set the number of additional copies,
and print the job from the printing system’s operation panel without sending the
job again from the computer.
The number of Quick copy or Proof and hold jobs that can be stored is set at
the printing system’s operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Quick copy jobs are stored on the hard disk after printing but are deleted when
the printing system is turned off. You can manually delete a job at the operation
panel.
Warning: A print job can replace a job on the hard disk having the same user
name and job name. To prevent this, select Use job name + date and time
under Overwrite job name.
With a hard disk installed, Quick copy lets you print a document and save it in
the printing system until the job is manually deleted or the printing system is
turned off.
In the Job tab, select Job storage (e-MPS).
1
Select Quick copy.
2
Click OK in all dialog boxes.
3
Proof and hold is a Job storage (e-MPS) option that prints one copy of a print
job so that you can proof it before printing the remaining copies. This feature is
available when a hard disk is installed in the printing system and selected in
Device Settings.
After the proof copy is printed and checked, remaining copies can be printed
from the printing system’s operation panel without sending the job again from
the computer. If desired, you can change the number of copies printed.
Note: Proof and hold is not available for some applications such as Microsoft
Excel.
The number of Proof and hold or Quick copy jobs that can be stored is set at
the printing system’s operation panel, to a maximum of 50 jobs. When the
designated number of jobs is reached, older jobs are replaced by new jobs. All
Proof and hold jobs are stored on the hard disk after printing but are deleted
when the printing system is turned off. You can manually delete a job at the
operation panel.
User Guide
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Job
Warning: A print job can replace a job on the hard disk having the same User
name and Job name. To prevent this, select Use job name + date and time
under Overwrite job name.
Proof and hold lets you print one copy of a multicopy job to proof before
printing the remaining copies. The job is stored on the hard disk until the printing
system is turned off or the job is manually deleted.
In the Basic tab, select the number of copies to be printed.
1
Open the Job tab.
2
Click Job storage (e-MPS).
3
Click Proof and hold, and click OK.
4
Private print jobs are saved on the hard disk for printing until a four-digit
Access code is entered. When the hard disk reaches maximum capacity and a
new job is sent to be stored, the oldest stored job is replaced by the new job.
Private print jobs are deleted when the printing system is reset or turned off. If
you do not want the job deleted, select the Job storage feature.
When sending a sensitive document to the printing system, a user must type a
four-digit Access code, which is attached to the print job along with the Job
name and User name. The job is not printed until a user enters the Access
code at the printing system’s operation panel. After the job is printed, it is
removed from printing system memory.
The number of Private print jobs that can be stored is limited only by the
storage capacity of the hard disk. You can manually delete a job at the
operation panel.
Warning: A print job can replace a job on the hard disk having the same User
name and Job name. To prevent this, select Use job name + date and time
under Overwrite job name.
Private print lets you store a document temporarily in printing system memory
without printing, and protect it with an access code. The job is stored on the
hard disk until it is printed, manually deleted, or turned off.
In the Job tab, select Job storage (e-MPS).
1
Select Private print.
2
In the Access code box, type four numbers if you want to restrict access to
your document.
3
Click OK.
4
KX DRIVER
9-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Job
Job storage is a Job storage (e-MPS) option that lets you store a print job
permanently on the hard disk for printing later. You also have the option of
protecting the print job from unauthorized printing by using an access code. This
feature is available when a hard disk is installed and selected in Device
Settings.
Job storage is useful for jobs that need to be available for printing at any time,
even if the printing system has been turned off and turned on again. Job
storage jobs can only be removed manually from printing system memory.
If desired, you can attach a four-digit access code to a Job storage job, so that
you can print a job without anyone else seeing it, or restrict printing to approved
users. When the access code is used, the job is not printed until a user prints it
at the printing system’s operation panel. After the job is printed, it remains in
printing system memory.
The number of Job storage jobs that can be stored is limited only by the
storage capacity of the hard disk. You can manually delete a job at the
operation panel.
Warning: A print job can replace a job on the hard disk having the same user
name and job name. To prevent this, select Use job name + date and time
under Overwrite job name.
Job storage lets you store a document permanently in printing system memory
without printing, and gives you the option to protect it with an access code. This
job remains on the hard disk until it is manually deleted.
In the Job tab, click Job storage (e-MPS).
1
Click Job storage.
2
In the Access code box, type four numbers if you want to restrict access to
your document.
3
Click OK.
4
A Job name is a unique identifier for each print job. It helps you find and print
your job from the printing system’s operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name
to the job or use the name of the application file.
For Microsoft Word and PowerPoint, you can choose to include or omit the
application name from the application defined Job name. You can also ensure
that jobs in printing system memory are not replaced by new jobs having the
same Job name.
Don't use application name is an option to remove the application name from
the job name in job storage features. By selecting Don't use application name,
the file name you choose appears clearly in the job list. This feature is
applicable only when printing from Microsoft Word or PowerPoint.
User Guide
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Job
Overwrite job name is an option to ensure that a saved print job is not replaced
in printing system memory by a new job having the same job name. If a user
sends two print jobs with the same user name and job name, the second job
replaces the first job without any prompt. To prevent this, Overwrite job name
can automatically change the job name by adding the date and time the job is
sent. This feature also helps you to track when print jobs were sent from the
computer.
The selected option applies to a job name with either Application defined or
Custom selected. Overwrite job name options include:
Replace existing file
This option lets the current print job replace an existing job in printing system
memory, if a job with the same user name and job name exists.
Use job name + date and time
This option adds the current date and time to the end of the job name, in the
format: mmddyy hhmmss.
The previous print job with the same job name remains in the printing system.
You must select a job name to use with Job storage (e-MPS) features, so that
you can find your job in job lists on the printing system’s operation panel. The
selected job name is saved with the print job when the job is sent to printing
system memory.
In the Job tab, select Job storage (e-MPS).
1
Under Job name, select a name:
2
Application defined
This option uses the name of the application document as the job name. For
Microsoft Word or PowerPoint documents, selecting Don’t use application
name removes the name of the application so that only the document name
appears as the job name.
Custom
This option uses a unique name for each job. Type a name in the box, up to
79 characters.
Select an Overwrite job name option in case a job already exists in printing
system memory with the same job name:
3
Replace existing file
If a job with the same user name and job name exists, the current print job
replaces an existing job in printing system memory.
Use job name + date and time
This option adds the current date and time to the end of the job name, in the
format:
mmddyy hhmmss
The previous print job with the same job name remains in the printing system
memory.
KX DRIVER
9-6
Download from Www.Somanuals.com. All Manuals Search And Download.
10 Advanced
In the Advanced tab, you can choose special features that extend the
capabilities of the printing system.
The Prologue/Epilogue feature lets you insert a command file at the beginning
of a print job or at the end. The command file, prepared in a text editor, utilizes
programming commands from the printer resident PRESCRIBE language. The
Product Library disc includes a PRESCRIBE command language reference
guide. A command file is a set of instructions the printing system interprets to
produce a given output. For example, a Prologue/Epilogue command file may
contain a macro that places a graphic object such as a logo at the top of a
letterhead document.
A Prologue/Epilogue file must be available on your computer before it can be
added to a print job. To create this file, use a text editor like Windows Notepad.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name to
insert into the print job. (If no file names are visible in the list, you must click Add
to browse for files on your computer or network to add to the list.) After the file is
selected, insertion point options become available.
You can edit a Prologue/Epilogue file on your computer.
User Guide
10-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
1
from the list, and then click Edit.
After your text editor opens, make your changes to the file.
Save the file and exit.
2
3
Note: Editing and saving a command file replaces the contents of the existing
local or network file.
You can remove a Prologue/Epilogue file from the list.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list, and then click Delete.
1
In the delete confirmation box, click Yes to accept.
2
Note: Only the file name is removed from the command file list. The file itself
is not deleted, but remains on the network or local computer.
You can insert a Prologue/Epilogue file into a print job.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
1
Under Insertion Point, select a place to insert the Prologue/Epilogue file.
2
If you designate a Prologue/Epilogue file as unassigned, you are removing it
from the print job. It remains in the list. Unassigned selections are useful when
the list contains several Prologue/Epilogue files, and you want to use some but
not others.
In Advanced > Prologue/Epilogue, select a Prologue/Epilogue file name
from the list.
1
Under Insertion Point, select Unassigned.
2
The insertion point is the location in the print job where the selected
Prologue/Epilogue command file is processed by the printing system. Each file
in the list can be assigned only one insertion point.
Note: The Start of the page and End of the page insertion point options are
available only if PCL 5c is selected in the PDL Settings dialog box.
With a command file selected in the list, choose one insertion point option:
KX DRIVER
10-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Unassigned
The selected command file is not inserted into the print job. This selection can
be used when you are working with multiple command files and want to use
some but not others. Select Unassigned for the command files you do not want
to use in the print job.
Beginning of the print job
The command file is inserted as the first page of the print job. The document
starts printing on the second page.
End of the print job
The command file is inserted as the last page of the print job, which prints after
the last page of the document.
Start of the page
The command file is inserted at the top of each page of the print job.
End of the page
The command file is inserted at the bottom of each page of the print job.
Only on odd pages
If Start of the page or End of the page is selected, this option can be
selected to insert the command file into all odd-numbered pages.
Only on even pages
If Start of the page or End of the page is selected, this option can be
selected to insert the command file into all even-numbered pages.
Pages
If Start of the page or End of the page is selected, this option can be
selected to insert the command file into specified pages. In the text box, type
individual page numbers separated by commas, or a page range separated
by a hyphen. For example, if you type 2 in the text box, the command file is
inserted only into page 2. If you type 1, 3, 5-12 the command file is inserted
into page 1, page 3, and pages 5 through 12. If the Pages option is selected
and you click OK without typing any numbers, you will be prompted to
specify page numbers.
A watermark is a recognizable image or pattern that can be placed on a page or
throughout a document. You can choose one of the standard watermarks or
create your own text. The preview area at the left of the dialog box shows how
the watermark appears on a page. This is useful for making adjustments to the
appearance and location of the watermark.
You can create a new watermark that displays your chosen text. Any watermark
can be edited, though a limited number of options can be changed for default
watermarks.
In the Advanced tab, click Watermark.
1
In the Watermark dialog box, click Add to create a user defined watermark; or
under Select watermark, select a default or custom watermark and click Edit.
2
User Guide
10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Under Watermark name, type a name, up to 39 characters. A default
watermark cannot be renamed.
3
4
Under Watermark text, type your preferred text. This option is not available
when editing a default watermark.
Select the font, style, size, and count of the text.
5
6
Select the color of the watermark from the list of default colors. For custom
colors, select Custom, and click the button to open the Color dialog box. Click
one of the Basic colors and click OK, or click Define Custom Colors to open
the color spectrum panel.
When selecting Color Mode > Black & White in the Imaging tab, the list of
default colors are levels of gray and black.
Select the Position of the watermark with one of the following options.
Centered [default]
7
8
This option places the center of the watermark text in the center of the page.
User defined
This option lets you manipulate the x and y coordinate boxes to move the
text around the page.
You can also change the position by clicking the position button at the bottom of
the preview area. Click and hold as you drag the pointer to move the watermark
image.
Select the Angle of the watermark with one of the following options.
Diagonal [default]
This option places the watermark text at the default angle on the page.
User defined
This option lets you type a degree value for the angle. An angle is measured
in degrees, from 0 to 360.
You can also change the angle by clicking the angle button at the bottom of the
preview area. Click and hold as you drag the pointer to move the watermark
image.
The Rotate around center check box at the bottom far right of the dialog box
determines the method of rotation for the watermark. You must select User
defined in both Position and Angle to enable this option. Select Rotate
around center to position the watermark text with the center of the text as its
axis, and clear it to position the watermark text with the left end of the text as its
axis.
9
In all dialog boxes, click OK.
10
The Page selection option for Watermark lets you choose the location for
watermarks in your document.
KX DRIVER
10-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
In Advanced > Watermark > Select watermark, choose a default or custom
watermark to print.
1
2
Under Page selection, choose pages for printing the watermark:
All pages
This option prints the watermark on each document page.
First page only
This option prints the watermark on the first document page.
All pages except first page
This option prints the watermark on all pages after the first page.
Only on specified pages
This option prints the watermark on page numbers typed in the box.
Print onto front outside cover
This option prints the watermark on the front cover. It is available when
Cover mode is selected in the Publishing tab. If Cover mode and Front
outside are both selected in the Publishing tab, Print onto front outside
cover is selected automatically.
In all dialog boxes, click OK.
3
The Security Watermark is a plug-in feature that prints a nearly invisible image
or text against a background pattern. The security watermark appears only
when the printed page is photocopied. This helps to identify printed pages that
should not be photocopied, or to distinguish between original prints and
photocopies. Six standard security watermarks are available as text or image,
and you can create custom security watermark text.
A notable feature of Security Watermark is the Document guard pattern,
which prevents the document from being photocopied, scanned, faxed, or
printed from memory. If a scan, fax, or print from memory is attempted, the
process is stopped and an error message appears on the printer's operation
panel.
Following installation of the printer driver, use the Optional Printer
Components wizard to install the Security Watermark plug-in.
Security Watermark appears in the Advanced tab if PCL XL is selected in the
PDL Settings dialog box.
The administrator can ensure that a security watermark is printed on all jobs by
selecting Device Settings > Administrator > Lock Settings > Lock Security
Settings.
Selecting Security Watermark sets these driver features to the following
values:
Watermark in the Advanced tab is set to None.
Printer profile in the Imaging tab is set to Line art.
EcoPrint in Quick Print, Basic > Color, or Imaging > Quality is set to Off.
Adjustment setting (color or black & white) in the Imaging tab is set to
None.
Color Optimizer in the Advanced tab is set to None.
User Guide
10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
The reverse is also true. If these features are changed, then the Security
Watermark selection is set to None, and cannot be used.
You can create a new security watermark that displays text but not an image.
Any security watermark can be edited, though a limited number of options can
be changed for default security watermarks.
In the Advanced tab, click Security Watermark.
1
In the Security Watermark dialog box, click Add, to create a new security
watermark; or under Select security watermark, select a default or custom
2
security watermark and click Edit.
For Security watermark name, type a name up to 39 characters. A default
security watermark cannot be renamed.
3
For Security watermark text, type text or leave blank. This option is not
available when editing a default security watermark. Select from the following
options:
4
None
This option leaves the line blank.
User defined
This option inserts your text up to 39 characters.
All other options display date, time, or other job information that is obtained
from the computer or printer driver when the job is printed.
Select the font, size, style, and angle of the text.
5
Select Print as footer also if you want the first available line of security
6
watermark text to be printed at the bottom of the page. Select the page position
from the list. This option is useful because the security watermark itself is not
normally visible on the printed page.
Under Background pattern, select a design for the security watermark
background.
7
Standard pattern
Select a design for the security watermark background. This option prints the
selected pattern with the security watermark text or image.
Document guard pattern
The document guard design appears as the security watermark background.
This option prevents the printed page from being photocopied, scanned,
faxed, or printed from memory. If a photocopy is attempted, then gray copy is
produced. If a scan, fax or print from memory is attempted, the process is
stopped and an error message appears on the printing system’s operation
panel.
Select a Watermark color for the security watermark from the list. The options
are Black, Cyan, or Magenta.
8
KX DRIVER
10-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
When selecting Color Mode > Black & White in the Imaging tab, the only
option for watermark colors is black.
For Security Watermark, Overprint is set by default. The security watermark is
printed over the document data so that it can appear clearly in a photocopy.
9
Adjust the calibration. After adjusting calibration in all dialog boxes click OK.
10
For a security watermark to be effective, it must be nearly invisible in a printed
page and clearly visible in a photocopied page. Because printing systems and
driver settings can vary, you must adjust the calibration before printing a
security watermark. Adjusting the calibration is also recommended when
changing the background pattern, replacing the toner or printing system, and
after heavy printing activity.
In Advanced > Security Watermark, click Add to create a custom security
watermark; or under Select security watermark, select a default or custom
1
security watermark and click Edit.
After all security watermark options are selected in the Add Security
Watermark or Edit Security Watermark dialog box, click Adjust Calibration.
2
Under Pattern shading and Text contrast, select initial options:
3
Light, Normal, Dark
Select the shading density of the background pattern.
Contrast 1-9
Select the level of contrast against the background pattern, from lightest to
darkest.
These selections may need to be changed after printing a sample in the next
step.
Click Print Sample to print a page displaying all nine contrast options against
the selected pattern shading. It is recommended to print a sample page for each
pattern shading option.
4
From the Text Contrast Sheet, find the sample where the security watermark is
most nearly invisible.
5
In the Adjust Calibration dialog box, select options to match the sample
chosen in step 5.
6
In all dialog boxes, click OK.
7
The Page selection options for security watermark determine where the
security watermarks are placed in the print job.
In Advanced > Security Watermark > Select security watermark, choose a
default or custom security watermark to print.
1
User Guide
10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Under Page selection, choose pages for printing the security watermark:
2
All pages
This option prints the security watermark on each document page.
First page only
This option prints the security watermark on the first document page.
All pages except first page
This option prints the security watermark on all pages after the first page.
Only on specified pages
This option prints the security watermark on the page numbers typed in the
text box.
Print onto front outside cover
This option prints the security watermark on the front cover. This option is
available when Cover mode is selected in the Publishing tab. If Cover
mode and Front outside are both selected in the Publishing tab, Print
onto front outside cover is selected automatically.
In all dialog boxes, click OK.
3
Color Optimizer is a plug-in feature that lets you match a single color
accurately in a print job. To install this optional component, see the Installation
chapter. Use this feature to print a document that contains only one color
besides black, such as a letterhead or company logo. The color should be solid
and consistent, with no shading. Color Optimizer will not work in a document
with multiple colors or photographs.
In the Color Optimizer dialog box, an eyedropper tool can be dragged into the
on-screen document to select the color, or RGB values can be entered if you
know them. A printed Color Optimizer Table lets you see 121 color variations
on paper and select your variation. Hue and Lightness settings are adjusted in
the driver according to the selected variation.
You can specify up to three custom settings that correspond to the custom
settings in the Imaging > Adjustment feature. You can also select a Printer
profile option.
When installed, the Color Optimizer button appears in the Advanced tab. The
Color Optimizer button does not appear in the user interface when PDF is
selected in the PDL Settings dialog box or Black & White mode is selected in
the Lock Settings dialog box. Color Optimizer is unavailable for the following
settings:
Black & White is selected in the Imaging, Basic, or Quick Print tab.
Lock Security Settings is selected in Device Settings.
In a client / server environment.
You can use Color Optimizer to match a single color accurately in a print job.
Options selected in the Color Optimizer dialog box are also saved in Imaging
> Adjustment. At any time, you can click the Info icon in the Color Optimizer
dialog box for instructions.
Open the document containing the desired color.
1
KX DRIVER
10-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
From the application's File menu, click Print, then click Preferences or
Properties to open the Properties dialog box.
2
3
In Advanced > Color Optimizer > Color adjustment, select Custom 1,
Custom 2, or Custom 3.
Under Printer profile, select from available options.
4
5
Select a color by one of the following methods:
Drag the eyedropper tool anywhere on the screen to select the desired color.
If you know the RGB values of the color, type or select the values.
The color appears in the color preview box.
Click the printer icon to print a one-page table displaying variations of the
selected color. From the printed Color Optimizer Table, select the desired
variation.
6
7
8
9
In the Color Optimizer dialog box, type the number of the selected variation
(1–121) in the spin box next to the color preview box, or click the up or down
arrow buttons to select the number.
If desired, type a description of the custom setting in the Description box, to a
maximum of 30 characters. The description only appears in the Color
Optimizer dialog box.
Click OK or Apply to save the settings.
The Status Monitor displays printing system status messages in the lower right
corner of the window during printing. You can start a status monitor for each
supported printing system. More than one status monitor can be displayed at
one time.
You can select how to display the Status Monitor image and select from
available options.
In the Advanced tab, click Status Monitor.
1
If you want the Status Monitor image to appear during a print job, in the Status
Monitor dialog box, select the Status Monitor check box.
2
To view the print job status without changing the Status Monitor setting, click
Open Status Monitor.
3
The Status Monitor image appears in the lower right corner of your computer
screen.
User Guide
10-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Move the pointer over the Status Monitor image to display balloon-style status
messages containing information about printing system activity and the printer
port. You can click the toner icon to display toner levels.
4
5
To display a list of options, right-click the Status Monitor icon in the system
tray.
Hide the status monitor/Show the status monitor
Switches between hiding and showing the Status Monitor image.
Note: You can also hide the Status Monitor image by right-clicking on the
image, then clicking Hide the status monitor, or let the Status Monitor close
on its own after 5 minutes if there is no printing activity.
Command Center RX
Opens a web browser to display a printer web page.
Note: If your printer is connected with a USB cable, this feature cannot be
used. Define settings using the operation panel of the printing system.
Always on top
Leaves the Status Monitor image on top of other open windows.
Opacity
Adjusts the Status Monitor to let a variable amount of background to show
through the image. Select a percentage between 20 to 100.
Enlarge window
Select to increase the size of the Status Monitor image.
Sound Notification
Opens a dialog box with options for Status Monitor sound notification and
display choices.
www.kyoceramita.com
Opens a web browser to the KYOCERA MITA home page.
Exit
Closes the Status Monitor image.
You can configure printing system alerts with accompanying sound or speech in
the Status Monitor Preference dialog box.
Right-click the Status Monitor image in the system tray.
1
Click Sound Notification.
2
Select the Enables Event Notification check box.
3
Select an event for a Status Monitor alert.
4
Cover open
Paper jam
KX DRIVER
10-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Add paper
Sleep
Add toner
Toner low
Not connected
Printing
Printing completed
You can also add sound or speech to your chosen alert.
To add a sound file:
5
6
Clear the Use Text to speech check box.
The sound file text box becomes available. Type the location of a sound file
(.WAV), or browse to find a file located on your computer.
To add speech:
Select Use Text to speech.
Type your preferred text in the text box. The Microsoft Text to Speech utility
reads your typed text and plays it back in a spoken voice.
Click Apply to save your settings, click OK to save your settings and close the
dialog box, or click Cancel to close the dialog box without saving any settings.
EMF (Enhanced MetaFile) is a spool file format used in printing by the Microsoft
Windows operating system. When a print job is sent from an application, it is
transferred to the spool file. The application writes to and the printer driver reads
from the spool file simultaneously. For multiple or large documents, this quickly
returns application control to the user while the printer is still printing the
document.
Note: EMF spooling is unavailable when Allow data passthrough is
selected in the KPDL Settings dialog box.
To print with EMF spooling:
From the Advanced tab, select the EMF Spooling check box.
1
Click OK and continue the printing process as usual.
2
Client profile refers to profile settings saved on a client computer. You have the
choice to use your local profiles or the server profiles. This feature is intended
for use on the client side (PC side) in a client-server environment.
In the Advanced tab, clear the Enable client profile check box to select
profiles from the server to apply to print jobs created by the driver. Server
profiles are read–only.
User Guide
10-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced
Select the Enable client profile check box for using custom profiles locally
in the driver.
KX DRIVER
10-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Access code
A four-digit code that you must enter at the printing system’s
operation panel to print a Private print job. An access code can also be used with the
Job storage feature.
A
Application based printing
An administrator can associate a profile with an
application so that all printing from the application uses the same profile settings. This
makes profiles easier to use and ensures consistent printing from an application.
Auto configure Device settings feature that queries a printing system through the
network and automatically retrieves settings for optional devices and memory. Driver
settings will be updated with information received from the physical printing system.
Installed devices will be displayed in the Preview image.
Bi-Fold Finishing feature that lets you produce a document folded in half, like a
brochure or a pamphlet.
B
C
Black & White With this option selected, the printer creates documents with black
toner only. This feature is available in the Imaging, Quick Print, and Basic tabs.
Booklet Layout feature that prints a multi-page document in a booklet format by
using a duplex unit. Two pages are printed on each side of a sheet to create a
document that can be read like a book.
Cassette A removable plastic tray that holds a supply of paper for input to the
printer.
Color conversion
Imaging feature that lets you choose how to apply color
processing to your print job depending on how color data is received from the
application.
Color optimizer Advanced tab plug-in feature that accurately matches a single
color in a print job. The documents for printing can contain only one color besides
black, such as a letterhead or a company logo. Color Optimizer does not work for a
document with multiple colors or photographs.
Continuous tone Imaging feature that represents images, or photographs in a
series of evenly graduated tones.
Custom box Job option that stores print jobs in the printing system’s memory for
later printing from the operation panel. Custom box jobs are saved to boxes that are
assigned to users, and can be restricted by password. Your printing system must have
an installed hard disk to use this feature.
Don’t use application name Don’t use application name is an option to shorten
the application defined job name for jobs created in Microsoft Word or PowerPoint.
The file name will appear clearly in the job list.
D
User Guide
i
Download from Www.Somanuals.com. All Manuals Search And Download.
EcoPrint Imaging feature that changes toner saturation, making the entire image,
text and graphics, appear lighter in the printed job. The actual amount of toner used
depends on the printing system mode and the type of data printed (text, graphics, or
both). You can choose to save toner by sliding the Toner save level bar from the left
(least amount of toner saved) to the right (most amount of toner saved). EcoPrint does
not increase print speed. This feature is also available in the Quick Print and Basic
tabs.
E
Edit Quick Print This feature lets you customize the Quick Print view with your
preferred print job options.
e-MPS Job storage (e-MPS) is a set of options for saving print jobs in printing
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system’s operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile Client profile refers to profile settings saved on a server and
accessed by clients in a client/server environment. This feature in the Advanced tab
lets an administrator control and distribute profiles.
Fast printing Printing mode that decreases spool size and increases print speed.
F
Finishing edge Finishing edge aligns the matching sides of two different page
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
Full bleed
Layout feature that lets you produce full-page printing without any
margins by printing to a larger sized-paper than the original, and then letting you trim
the edges.
GDI compatible mode A page description language option that accurately
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
G
J
Gutter Blank space on the left side or top of a printed page that can be increased
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
Job accounting An accounting system that records and controls the number of
pages printed by each account ID. Account IDs can be assigned at the printing system
and stored in the driver. After account IDs are assigned, you can use the Job
accounting option to print in the Job accounting mode.
Job name A Job name is a unique identifier for each print job, to help you find and
print the job from the printing system’s operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name to the
job or use the name of the application file.
Job storage Job option that stores a print job permanently on a hard disk for
printing later. You also have the option of protecting the print job from unauthorized
KX DRIVER
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
printing by using an access code. This feature is available when a hard disk is installed
and selected in Device Settings.
Media source enumeration
A
Device Settings option that maintains
M
compatibility for cassettes and feeders between old drivers and new drivers or when
moving from one manufacturer to another. Compatibility creates a smooth transition
for environments using macros or PRESCRIBE commands to access cassettes and
feeders.
MP tray Source tray used for labels, transparencies, envelopes, and custom
printing media.
Multiple pages per sheet This feature lets you print several pages on a single
sheet of paper for the purpose of reviewing the document and conserving paper.
Operation panel The keys and display on the printing system. Use the operation
panel to set options such as media type and EcoPrint, and to print jobs stored on the
hard disk.
O
P
Optional Printer Components Optional Printer Components include Common
Profiles and Plug-In Modules, and need to be installed separately from the driver
installer. They are located on the Product Library disc in the Advanced Tools menu.
PDF The Adobe portable document format (PDF) is independent of the application
software, hardware, and operating system used to create documents, and also of the
output device on which they are displayed or printed.
PDL Page Description Language. This is the language used by your computer to
tell the printing device how to print a document. Availability of some printing options
depends on the selected PDL.
Plug-in An accessory program that integrates with the printer driver to enhance or
extend the driver's capabilities.
Poster Layout feature for printing a document in a larger size than the maximum
supported by the printer so the cumulative sheets can be assembled as a poster. Use
this feature to print a document in a large, eye-catching poster format, up to 25 times
larger than the original document size.
PRESCRIBE An internal printer language that embeds commands into specified
locations in a print job.
Print graphics as black
This option prints all color graphics and text with black,
rather than grayscale. This feature is intended for CAD applications.
Print grays with black toner Imaging feature that prints grayscale with black
toner only.
Print preview This feature lets you view your document before you send it to print.
Print text as black Prints all color text as black. It produces faster printing of color
print jobs by reducing the amount of data sent to the printer. In black and white
printing, it increases the detail for light-colored text printed. White text and image
colors are unaffected.
iii
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Private print Job option that saves print jobs on the hard disk for printing until a
four-digit access code is entered. Private print jobs are deleted when the printing
system is reset or turned off.
Profile A set of user defined driver settings that are saved as a group. Once saved,
you can select a profile by name and apply its settings to a print job without selecting
each feature individually.
Prologue/Epilogue
Advanced feature that allows you to insert a macro into
specific locations in the print job. An advanced user may choose to use this feature to
embed a PRESCRIBE command that will call a macro to overlay PRESCRIBE form
data or a graphic object, such as a logo or a signature, at a specific point in the print
job.
Proof and hold Job option that prints one copy of a print job so that you can proof
it before printing the remaining copies. This feature is available when a hard disk is
installed and selected in Device Settings. After the proof copy is printed and checked,
remaining copies can be printed from the printing system’s operation panel without
sending the job again from the computer.
Quick copy
Job option that prints all copies of a print job and stores the job
Q
S
temporarily on a hard disk for reprinting later. This feature is available when a hard
disk is installed and selected in Device Settings.
Quick Print tab The Quick Print tab improves usability by providing an easier way
to set print options. You can choose basic settings or a predefined printer profile,
rather than having to go to various tabs. Quick Print settings can be captured in a
group called a profile. Profiles support common printing tasks, saving you from having
to repeatedly select the same settings. The Administrator can set the view of the Quick
Print tab through the Installation process, or Administrator Settings in Properties.
Security Watermark Plug-in feature that adds watermark text and a background
pattern to a print job. The text blends into the background pattern making it nearly
invisible when printed. The security watermark appears only when the printed page is
photocopied. A security watermark can be used to help protect against unauthorized
reproduction of documents, or simply to differentiate original documents from
photocopies.
SNMP Simple Network Management Protocol. The standard TCP/IP protocol for
managing IP network devices, including printing devices. SNMP settings determine
the level of security when using the Auto Configure feature, and prevent unauthorized
printing to the SNMPv3 printing device. SNMP settings must be set in the
Administrator settings in Device Settings, and in the printing system’s Command
Center RX.
Status monitor Optional feature that displays printing system status messages in
the lower right corner of the window during printing. You can customize the
appearance of the status monitor, and determine what messages are displayed and
how by selecting preferences and notifications.
Transparency A clear plastic, page-sized sheet used as a printing medium.
T
Transparency interleaving
Publishing feature that inserts a backing sheet
between printed transparencies. The backing sheet, also known as an interleaf, helps
keep transparencies clean and prevents them from clinging together.
KX DRIVER
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Trapping This feature intentionally overlaps colors slightly so that minor problems
with alignment are not noticeable when printing in color.
Tri-Fold Finishing feature that lets you produce a document folded into thirds, like
a brochure or a pamphlet.
Watermark The Watermark feature is available in the Advanced tab. A watermark
is a recognizable image or pattern that can be placed on a page or throughout a
document. You can choose one of the standard watermarks or create your own text.
W
User Guide
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Rev. 14.01 2011.02
Download from Www.Somanuals.com. All Manuals Search And Download.
|