LG Electronics Car Video System 19MB35PM User Manual
OWNER’S MANUAL  
IPS LED MONITOR  
(LED LCD MONITOR)  
Please read this manual carefully before operating  
your set and retain it for future reference.  
IPS LED(LED LCD) MONITOR MODEL  
19MB35PM  
22MB35PM  
23MB35PM  
www.lg.com  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
2
CONTENTS  
3
ASSEMBLING AND PREPAR-  
ING  
21 TROUBLESHOOTING  
23 SPECIFICATIONS  
3
4
5
5
5
6
7
7
8
8
9
9
10  
Unpacking  
Parts and buttons  
23  
24  
25  
26  
26  
19MB35PM  
Setting up the Monitor set  
- Attaching the Stand Base  
- Detaching the stand base  
- Detaching the stand body  
- Mounting on a table  
- Adjusting the angle  
22MB35PM  
23MB35PM  
Preset Modes (Resolution)  
Indicator  
- Adjusting the stand height  
- Using the Kensington locking device  
- Swivel stand  
27 PROPER POSTURE  
27  
Proper posture for using the Monitor set.  
- Using the Pivot function  
- Mounting on a wall  
11 USING THE MONITOR SET  
11  
11  
11  
12  
Connecting to a PC  
- D-SUB connection  
- DVI-D connection  
- Peripheral device connection  
13 CUSTOMIZING SETTINGS  
14  
14  
15  
16  
17  
18  
19  
20  
Customizing Settings  
- Menu Settings  
-Picture  
-Color  
-Display  
-Others  
READER Setting  
-SUPER ENERGY SAVING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
3
ASSEMBLING AND PREPARING  
Unpacking  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual product  
and accessories.  
D-SUB Cable  
DVI-D Cable  
CD(Owner's Manual) /  
Card  
(This cable is not included in all (This cable is not included in all  
countries.)  
countries.)  
Audio Cable  
Power Cord  
Stand Base  
( Depending on the country )  
CAUTION  
Do not use any unapproved accessories to ensure the safety and product life span.  
y y  
Any damages or injuries by using unapproved accessories are not covered by the warranty.  
y y  
NOTE  
The accessories supplied with your product may vary depending on the model.  
y y  
Product specifications or contents in this manual may be changed without prior notice due to upgrade  
y y  
of product functions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
4
Parts and buttons  
Power Indicator  
LED On : Power is on  
y y  
LED Off: Power is off  
y y  
(Power Button)  
Front Side Buttons  
Input Connectors (See p.11 to 12)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
5
Detaching the stand base  
Setting up the Monitor set  
Place the monitor's screen face down.  
1
Attaching the Stand Base  
To protect the screen from scratches, cover the  
surface with a soft cloth.  
Place the Monitor set with the screen side  
down on a flat and cushioned surface.  
1
CAUTION  
Using a coin, turn the screw in the stand base  
counterclockwise. Detach the stand base from  
the stand body.  
2
To protect the screen from scratches, cover  
y y  
the surface with a soft cloth.  
Check the position (at the front and rear) of  
the stand body, then mount the stand base on  
the stand body as shown in the figure.  
2
Stand Body  
Stand Body  
Stand Base  
CAUTION  
Stand Base  
Using a coin, turn the screw clockwise to se-  
cure the stand base.  
3
The components appearing in the illustra-  
y y  
tions may look different from the actual prod-  
uct.  
Do not carry the monitor upside-down as this  
y y  
may cause it to fall off its stand, resulting in  
damage or injury.  
To avoid damaging the screen when lifting  
y y  
or moving the monitor, only hold the stand or  
the plastic cover. This avoids putting unnec-  
essary pressure on the screen.  
Only remove the tape and the locking pin  
y y  
when the monitor is mounted on the stand  
base and is in an upright position. Otherwise,  
the stand body may protrude, which may  
lead to injury.  
Stand Base  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
6
Detaching the stand body  
Place the monitor's screen face down. To  
protect the screen from scratches, cover the  
surface with a soft cloth.  
1
Using a screwdriver, remove the four screws  
and detach the stand from the monitor.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
7
Mounting on a table  
Adjusting the angle  
Lift the monitor and place it on the table in an  
upright position.  
Place the monitor mounted on the stand base  
in an upright position.  
1
1
Install at least 10 cm away from the wall to  
ensure sufficient ventilation.  
Adjust the angle of the screen. The angle of  
the screen can be adjusted up to 5° forwards  
and 20° backwards for a comfortable viewing  
experience.  
2
10 cm  
10 cm  
10 cm  
10 cm  
Rear Side  
Front Side  
WARNING  
2
Connect the Power cord to the monitor, then  
plug the power cord into the wall outlet.  
To avoid injury to the fingers when adjusting  
y y  
the screen, do not hold the lower part of the  
monitor's frame as illustrated below.  
Be careful not to touch or press the screen  
y y  
area when adjusting the angle of the monitor.  
Press the (Power) button on the front of the  
monitor to turn on the monitor.  
3
CAUTION  
Unplug the power cord prior to moving or  
y y  
installing the monitor. There is risk of electric  
shock.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
8
Adjusting the stand height  
Using the Kensington locking  
device  
Place the monitor mounted on the stand base  
in an upright position.  
1
The connector for the Kensington lock is located  
on the rear of the monitor.  
For more information on installation and usage,  
refer to the Kensington lock user manual or visit  
the website at http://www.kensington.com.  
Remove the tape attached at the bottom rear  
of the stand body, then pull out the locking  
pin.  
2
Connect the monitor to the table with the Kensing-  
ton lock cable.  
Stand Body  
Tape  
Locking Pin  
The height can be adjusted up to 110 mm.  
3
19MB35PM  
22MB35PM 23MB35PM  
110.0mm  
NOTE  
Using the Kensington lock is optional. The  
y y  
accessories can be purchased at your local  
electronics store.  
CAUTION  
Once the pin is removed, it is not necessary  
y y  
to re-insert it to adjust the height.  
WARNING  
Do not put your finger be-  
y y  
tween the screen and the  
base (chassis) when adjust-  
ing the screen's height.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
9
Be careful with the cables when rotating the  
screen.  
3
Swivel stand  
Image shown may differ from your Monitor  
y y  
set.  
Swivel 355 degrees and adjust the angle of the  
Monitor set to suit your view.  
1
Using the Pivot function  
The pivot function allows you to rotate the screen  
90 degrees clockwise.  
Lift the monitor to its highest height to utilize  
the Pivot function.  
1
2
Landscape & Portrait : You can rotate the panel  
90° clockwise. Please be cautious and avoid  
contact between the monitor head and the  
Stand Base when rotating the screen to access  
the Pivot function. If the monitor head touches  
the Stand Base, then the Stand Base could  
crack.  
Head  
section  
Stand  
section  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLING AND PREPARING  
10  
Model  
Mounting on a wall  
19MB35PM  
23MB35PM  
22MB35PM  
For proper ventilation, allow a clearance of 10 cm  
on each side and from the wall. Detailed  
instructions are available from your dealer, see the  
optional Tilt Wall Mounting Bracket Installation and  
Setup Guide.  
VESA (A x B)  
Standard screw  
Number of screws 4  
75 x 75  
M4  
100 x 100  
CAUTION  
Disconnect the power cord first, and then  
y y  
move or install the Monitor set. Otherwise  
electric shock may occur.  
10 cm  
If you install the Monitor set on a ceiling or  
y y  
10 cm  
10 cm  
slanted wall, it may fall and result in severe  
injury.  
10 cm  
Use only an authorized LG wall mount  
y y  
and contact the local dealer or qualified  
personnel.  
Do not over tighten the screws as this may  
y y  
cause damage to the Monitor set and void  
your warranty.  
Use only screws and wall mounts that  
y y  
meet the VESA standard. Any damages  
or injuries by misuse or using an improper  
accessory are not covered by the warranty.  
NOTE  
If you intend to mount the Monitor set to a wall,  
attach Wall mounting interface (optional parts) to  
the back of the set.  
Use the screws that are listed on the VESA  
y y  
standard screw specifications.  
When you install the Monitor set using a wall  
mounting interface (optional parts), attach it  
carefully so it will not drop.  
The wall mount kit will include an installation  
y y  
manual and necessary parts.  
The wall mount bracket is optional. You can  
y y  
Please, Use the screw and wall mount interface  
in accordance with VESA Standards.  
1
2
3
obtain additional accessories from your local  
dealer.  
The length of screws may differ depending  
y y  
on the wall mount. Be sure to use the proper  
length.  
For more information, refer to the  
y y  
If you use screw longer than standard, the  
monitor might be damaged internally.  
If you use improper screw, the product might be  
damaged and drop from mounted position. In  
this case, LG Electronics is not responsible for  
it.  
instructions supplied with the wall mount.  
VESA compatible.  
4
5
Please use VESA standard as below.  
784.8 mm (30.9 inch) and under  
y y  
* Wall Mount Pad Thickness : 2.6 mm  
* Screw : Φ 4.0 mm x Pitch 0.7 mm x  
Length 10 mm  
787.4 mm (31.0 inch) and above  
y y  
* Please use VESA standard wall mount pad  
and screws.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE MONITOR SET  
11  
USING THE MONITOR SET  
DVI-D connection  
Connecting to a PC  
Transmits a digital video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with a DVI cable as shown in the following  
illustrations.  
Your Monitor set supports Plug & Play*.  
y y  
*Plug & Play: A PC recognizes a connected  
device that users connect to a PC and turn  
on, without device configuration or user  
intervention.  
D-SUB connection  
Transmits analog video from your PC to the  
Monitor set. Connect the PC and the Monitor set  
with the supplied D-sub 15 pin signal cable as  
shown in the following illustrations.  
NOTE  
When you want to use two PC in our Monitor,  
y y  
please connect the signal cable(D-SUB/  
DVI-D) respectively in Monitor set.  
If you turn the Monitor set on while it is cold,  
y y  
the screen may flicker. This is normal.  
Some red, green, or blue spots may appear  
y y  
on the screen. This is normal.  
NOTE  
When using a D-Sub signal input cable  
y y  
connector for Macintosh  
CAUTION  
Connect the signal  
y y  
input cable and tighten  
it by turning the screws  
clockwise.  
Do not press the screen  
y y  
Mac adapter  
y y  
with your finger for a long time as this may  
result in temporary distortion on the screen.  
Avoid displaying a fixed image on the  
y y  
For Apple Macintosh use, a separate plug  
adapter is needed to change the 15 pin  
high density (3 row) D-SUB VGA connector  
on the supplied cable to a 15 pin 2 row  
connector.  
screen for a long period of time to prevent  
image burn. Use a screensaver if possible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
USING THE MONITOR SET  
12  
Peripheral device connection  
Self Image Setting Function  
Press the power button on the bottom panel to  
turn the power on. When monitor power is turned  
on, the "Self Image Setting" Function is executed  
automatically. (Only supported in Analog Mode)  
Connect peripheral devices to the monitor using  
headphone ports.  
NOTE  
"Self Image Setting" Function.  
y y  
This function provides the user with optimal  
display settings.When the user connects  
the monitor for the first time, this function  
automatically adjusts the display to optimal  
settings for individual input signals.(Only  
supported in Analog Mode)  
NOTE  
Peripheral devices are sold separately.  
y y  
Cables with angled plugs may have clear-  
y y  
‘AUTO’ Function.  
y y  
ance issues, use straight plugs when pos-  
sible.  
When you encounter problems such as  
blurry screen, blurred letters, screen flicker  
or tilted screen while using the device or  
after changing screen resolution, press the  
AUTO function button to improve resolution.  
(Only supported in Analog Mode)  
Angle Type  
Straight Type  
NOTE  
Headphones or speakers may not work nor-  
y y  
mally, depending on the server PC settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
13  
CUSTOMIZING SETTINGS  
Press the desired button on the bottom of the Monitor set.  
1
2
Change the value of the menu item by pressing the buttons on the bottom of the Monitor set.  
To return to the upper menu or set other menu items, use the up arrow ( ) button.  
Select EXIT to leave the OSD menu.  
3
Monitor set Buttons  
Button  
Description  
Accesses the main menus.(See p.14)  
OSD Locked/OSD  
Unlocked  
This function allow you to lock the current control settings, so  
that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds. Then  
OSD of “OSD Lock” will appear. After that, user can select  
lock or unlock by pressing left/right button.  
If user selects the “Lock” icon by pressing the “OK” button,  
the message “OSD Locked” will appear. Otherwise, “OSD  
Unlocked” will appear. After selecting the “Lock”, If you want  
to change to Unlock, you can push the “MENU” button for  
several seconds. The message “OSD Unlocked” will appear.  
Use this button to enter Reader Mode menu. Its function works to display screen as  
paper-like picture for Eye comfort.If you want to more information.(See p.19)  
Use this button to enter SUPER ENERGY SAVING menu.(See p.20)  
When adjusting your display settings, always press the AUTO button on the MONITOR  
SETUP OSD. (Only supported in Analog Mode)  
The best display mode 19MB35PM:1280 x 1024  
22MB35PM/23MB35PM:1920 x 1080  
You can choose the input signal.  
•
When two input signals are connected, you can select the input signal (D-SUB/DVI)  
you want.  
•
When only one signal is connected, it is automatically detected. The default setting is  
D-SUB.  
EXIT  
Exit the OSD(On Screen Display).  
Turns the power on or off.  
(Power Button)  
Power Indicator  
The power indicator stays white if the display is running  
properly (On Mode). If the display is in Sleep Mode, the power  
indicator blinks white.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
14  
Customizing Settings  
Menu Settings  
Press MENU button on the bottom of the Monitor set  
to display the Menu OSD.  
1
2
3
4
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select the "Next Menu" button to enter the more  
option settings.  
Select EXIT to leave the OSD menu.  
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
Menu  
Analog Digital  
Description  
Volume  
●
●
●
●
To adjust the volume  
Brightness  
To adjust the brightness of the screen  
Response  
Time  
(only for  
19MB35PM,  
23MB35PM)  
You can set a response time for displayed pictures based on the speed of the  
screen. For a normal environment, it is recommended that you use 'Off'. For a fast-  
moving picture, it is recommended that you use 'High'.  
●
●
Wide/  
Wide  
Original  
Switch to full screen mode according to input image signal.  
(only for  
22MB35PM,  
23MB35PM)  
●
●
●
●
Original  
Change the input image signal ratio to original.  
* This function works only if input resolution is lower than Monitor set ratio (16:9).  
Reset  
Restore all factory default settings. Press the  
,
buttons to reset immediately.  
◄ ►  
Menu > Next Menu  
Picture Contrast  
Analog Digital  
Description  
To adjust the contrast of the screen  
●
●
●
●
Sharpness  
Gamma  
To adjust the clearness of the screen  
Color  
Color Temp  
Six Color (only  
for 19MB35PM,  
23MB35PM )  
●
●
To customize the color of the screen  
Color Reset (only  
for 19MB35PM,  
23MB35PM)  
Display Horizontal  
Vertical  
●
●
To adjust the position of the screen  
Clock  
To improve the clarity and stability of the screen  
Phase  
Others Language  
●
●
●
●
To customize the screen status for a user's operating  
environment  
Power Indicator  
Off Time Setting  
Analog: D-SUB(Analog signal) input.  
y y  
Digital: DVI-D(Digital signal) input.  
y y  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CUSTOMIZING SETTINGS  
15  
Picture  
Press MENU button on the bottom of the Monitor set  
to display the Menu OSD.  
1
2
Select the "Next Menu" button to enter the more  
option settings.  
Enter to Picture by pressing the ▼ button.  
3
4
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
5
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
Menu > Next Menu > Picture  
Contrast  
Description  
To adjust the contrast of the screen.  
To adjust the clearness of the screen.  
Sharpness  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
16  
Color  
Press MENU button on the bottom of the Monitor set  
to display the Menu OSD.  
1
2
Select the "Next Menu" button to enter the more  
option settings.  
Select Color by pressing the ► button.  
3
4
5
Enter to Color by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
Menu > Next Menu > Color  
Gamma  
Description  
Set your own gamma value. : Gamma 0, Gamma 1, Gamma 2 on the monitor,  
high gamma values display whitish images and low gamma values display  
blackish images.  
Color Temp  
Custom  
• Red:Set your own red color levels.  
• Green: Set your own green color levels.  
• Blue:Set your own blue color levels.  
Select the screen color.  
Warm: Set the screen to warm color temperature (more red).  
Medium: Set the screen to medium color temperature.  
Cool: Set the screen to cool color temperature (more blue).  
Six Color  
(only for 19MB35PM, 23MB35PM)  
Sets and stores the hue and saturation for six colors(Red/Green/Blue/Cyan/  
Magenta/Yellow) to satisfy the color requirements of a user.  
Hue  
Adjusts the screen hue.  
Saturation  
Adjusts the color sharpness on the screen. Lower values make  
the color sharpness weaker and colors lighter while higher  
values make the color sharpness stronger and colors dark.  
Color Reset  
(only for 19MB35PM, 23MB35PM)  
Resets the color settings to the factory default settings for the current input  
device.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
17  
Display  
Press MENU button on the bottom of the Monitor set  
to display the Menu OSD.  
1
2
Select the "Next Menu" button to enter the more  
option settings.  
Select Display by pressing the ► button.  
3
4
5
Enter to Display by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
Menu > Next Menu > Display  
Description  
Horizontal  
Vertical  
Clock  
To move image left and right.  
To move image up and down.  
To minimize any vertical bars or stripes visible on the screen background.The  
horizontal screen size will also change.  
Phase  
To adjust the focus of the display. This item allows you to remove any horizontal  
noise and clear or sharpen the image of characters.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
18  
Others  
Press MENU button on the bottom of the Monitor set  
to display the Menu OSD.  
1
2
Select the "Next Menu" button to enter the more  
option settings.  
Select Others by pressing the ► button.  
3
4
5
Enter to Others by pressing the ▼ button.  
Set the options by pressing the ◄ or ► or ▼  
buttons.  
Select EXIT to leave the OSD menu.  
6
To return to the upper menu or set other menu items,  
use the up arrow ( ) button.  
Each option is explained below.  
Menu > Next Menu > Others  
Language  
Description  
To choose the language in which the control names are displayed.  
Power Indicator  
Use this function to set the power indicator on the bottom side of the monitor to  
On or Off.If you set Off, it will go off.  
If you set On at any time, the power indicator will automatically be turned on.  
Off Time Setting  
The monitor set will switch to power off mode after the time to be chosen by user  
(1 ~ 24 hours)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
19  
READER Setting  
Press READER button on the bottom of the Monitor  
set to display the Reader Mode OSD.  
1
Set the options by pressing the ◄ buttons.  
2
Each option is explained below.  
Reader Mode  
Reader 1  
Description  
It is a mode that the screen is adjusted to the best for the newspaper. If you  
want screen more bright, you can control brightness in Menu OSD.  
Reader 2  
It is a mode that the screen is adjusted to the best for the cartoon. If you want  
screen more bright, you can control brightness in Menu OSD.  
Reader Off  
It is a mode that reader mode is off.  
NOTE  
If option of Reader Mode is Reader 1 or Reader 2, Picture Mode will automatically be Custom and  
Super Energy Saving will automatically be Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CUSTOMIZING SETTINGS  
20  
SUPER ENERGY SAVING  
Press  
button on the bottom of the Monitor set to  
1
2
display the SUPER ENERGY SAVING OSD.  
Set the options by pressing the ► buttons.  
Each option is explained below.  
SUPER ENERGY SAVING  
Description  
High  
Low  
Off  
Enables SUPER ENERGY SAVING you can save energy with this energy- high efficient function.  
Enables SUPER ENERGY SAVING you can save energy with this energy- low efficient function.  
Disables SUPER ENERGY SAVING.  
NOTE  
TOTAL POWER REDUCTION: How much power is saved while using the monitor.  
y y  
TOTAL CO2 REDUCTION: Change the TOTAL POWER REDUCTION to CO2.  
y y  
SAVING DATA(W/h)  
y y  
482 mm  
(19 inch)  
546 mm  
(21.5 inch)  
584 mm  
(23 inch)  
SUPER SAVING (High)  
SUPER SAVING (Low)  
3 W/h  
1 W/h  
4 W/h  
2 W/h  
4 W/h  
2 W/h  
Saving Data depends on the Panel. So,those values should be different from each panel and panel  
y y  
vendor.If option of Super Energy Saving is High or Low, monitor luminance become higher or lower  
depend on source.  
LG calculated these values by using “broadcast video signal”  
y y  
(including broadcast video: IEC 62087)  
SUPER SAVING refers to how much power can be saved using the SUPER ENERGY SAVING  
y y  
function.  
If option of Super Energy Saving is High or Low, Picture Mode will automatically be Custom and  
y y  
Reader Mode will automatically be Reader Off.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
21  
TROUBLESHOOTING  
Check the following before calling for service.  
No image appears  
Is the power cord of the display  
connected?  
Check and see if the power cord is connected properly to the power  
outlet.  
y
Is the power indicator light on?  
Press the Power button.  
y
y
Is the power on and the power  
indicator White?  
Adjust the brightness and the contrast.  
Is the power indicator flickering?  
If the display is in power saving mode, try moving the mouse or  
pressing any key on the keyboard to bring up the screen.  
Try to turn on the PC.  
y
y
y
Do you see an "OUT OF RANGE"  
message on the screen?  
This message appears when the signal from the PC (video card) is  
out of horizontal or vertical frequency range of the display. See the  
'Specifications' section of this manual and configure your display  
again.  
Do you see a "NO SIGNAL"  
message on the screen?  
When the monitor is on "No-Signal" in 5 minutes, the monitor goes to  
DPM mode.  
y
Do you see a "OSD LOCKED" message on the screen?  
Do you see “OSD LOCKED” when  
you push MENU button?  
You can secure the current control settings, so that they cannot be  
inadvertently changed. You can unlock the OSD controls at any time  
by pushing the MENU button for several seconds: the message “OSD  
UNLOCKED” will appear.  
y
Display image is incorrect  
Display Position is incorrect.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
y
y
On the screen background, vertical  
bars or stripes are visible.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
Any horizontal noise appearing in  
any image or characters are not  
clearly portrayed.  
Press the AUTO button to automatically adjust your display image to  
the ideal setting.  
Check Control Panel ► Display ► Settings and adjust the display  
to the recommended resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits (true color).  
y
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
22  
CAUTION  
Check Control Panel ► Display ► Settings and see if the frequency or the resolution were  
y y  
changed. If yes, readjust the video card to the recommend resolution.  
If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the  
y y  
screen may be dimmed, truncated or biased. Make sure to select the recommend resolution.  
The setting method can differ by computer and O/S (Operation System), and resolution mentioned  
y y  
above may not be supported by the video card performance. In this case, please ask to the computer  
or the video card manufacturer.  
Display image is incorrect  
The screen color is mono or  
abnormal.  
Check if the signal cable is properly connected and use a screwdriver  
to fasten if necessary.  
y
Make sure the video card is properly inserted in the slot.  
Set the color setting higher than 24 bits (true color) at Control Panel  
► Settings.  
y
y
The screen blinks.  
Check if the screen is set to interlace mode and if yes, change it to the  
recommend resolution.  
y
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message?  
Have you installed the display  
driver?  
Be sure to install the display driver from the display driver CD (or  
diskette) that comes with your display. Or, you can also download the  
driver from our web site: http://www.lg.com.  
y
Make sure to check if the video card supports Plug&Play function.  
y
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
23  
SPECIFICATIONS  
19MB35PM  
Display  
Screen Type  
TFT (Thin Film Transistor) LCD (Liquid Crystal Display)  
Panel,Anti-Glare coating  
48.2 cm visible diagonal (19 inch)  
Pixel Pitch  
0.294 mm x 0.294 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB,DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1280 x 1024 @ 60 Hz  
DVI (Digital) : 1280 x 1024 @ 60 Hz  
Recommend  
VESA 1280 x 1024 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 15 W (ENERGY STAR® standard)*  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
AC 100-240V ~ 50/60Hz 0.8 A  
1 W +1 W  
Speaker Wattage  
Dimensions  
(Width x Height x  
Depth)  
With Stand  
40.9 cm x 48.1 cm x 21.0 cm  
40.9 cm x 33.8 cm x 5.8 cm  
Without Stand  
Weight  
3.8 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
* The power consumption level can be different by operating condition and monitor setting.  
* The On mode power consumption is measured with ENERGY STAR® test standard.  
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
24  
SPECIFICATIONS  
22MB35PM  
Display  
Screen Type  
TFT (Thin Film Transistor) LCD (Liquid Crystal Display)  
Panel,Anti-Glare coating  
54.6 cm visible diagonal (21.5 inch)  
Pixel Pitch  
0.248 mm x 0.248 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB,DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
DVI (Digital) : 1920 x 1080 @ 60 Hz  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 20 W (ENERGY STAR® standard)*  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
AC 100-240V ~ 50/60Hz 1.0 A  
1 W +1 W  
Speaker Wattage  
Dimensions  
(Width x Height x  
Depth)  
With Stand  
50.9 cm x 35.3 cm x 22.4 cm  
50.9 cm x 30.4 cm x 14.4 cm  
Without Stand  
Weight  
3.9 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
* The power consumption level can be different by operating condition and monitor setting.  
* The On mode power consumption is measured with ENERGY STAR® test standard.  
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
25  
SPECIFICATIONS  
23MB35PM  
Display  
Screen Type  
TFT (Thin Film Transistor) LCD (Liquid Crystal Display)  
Panel,Anti-Glare coating  
58.4 cm visible diagonal (23 inch)  
Pixel Pitch  
0.2652 mm x 0.2652 mm (Pixel Pitch)  
Sync Input  
Horizontal Frequency 30 kHz to 83 kHz (Automatic)  
Vertical Frequency  
Input Form  
Signal Input  
Input Form  
Max  
56Hz to 75Hz (D-SUB,DVI-D)  
Separate Sync. Digital  
Video Input  
Resolution  
15 pin D-SUB Connector /DVI-D Connector (Digital)  
RGB Analog (0.7 Vp-p/ 75 ohm), Digital  
D-SUB(Analog) : 1920 x 1080 @ 60 Hz  
DVI (Digital) : 1920 x 1080 @ 60 Hz  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
Plug & Play  
DDC 2B(Analog,Digital)  
Power  
Consumption  
On Mode : 21 W (ENERGY STAR® standard)*  
Sleep Mode ≤ 0.3 W  
Off Mode ≤ 0.3 W  
Power Input  
AC 100-240V ~ 50/60Hz 1.0 A  
1 W +1 W  
Speaker Wattage  
Dimensions  
(Width x Height x  
Depth)  
With Stand  
54.8 cm x 36.7 cm x 24.6 cm  
54.8 cm x 33.5 cm x 16.6 cm  
Without Stand  
Weight  
4.5 kg  
Tilt Range  
-5° to 20°  
Environmental  
conditions  
Operating Temperature 10°C to 35 °C  
Operating Humidity  
10 % to 80 %  
Storage Temperature  
Storage Humidity  
-20°C to 60 °C  
5 % to 90 % non-Condensing  
Stand Base  
Power cord  
Attached ( ), Detached (O)  
Wall-outlet type  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
* The power consumption level can be different by operating condition and monitor setting.  
* The On mode power consumption is measured with ENERGY STAR® test standard.  
* ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SPECIFICATIONS  
26  
Preset Modes (Resolution)  
19MB35PM  
Horizontal  
Display Modes (Resolution)  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Polarity(H/V)  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.023  
67.500  
70  
60  
75  
60  
75  
60  
75  
75  
-/+  
-/-  
-/-  
+/+  
+/+  
-/-  
-/-  
+/+  
1280 x 1024  
1280 x 1024  
63.981  
79.976  
60  
75  
+/+  
+/+  
Recommend Mode  
22MB35PM 23MB35PM  
Horizontal  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Display Modes (Resolution)  
Polarity(H/V)  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
31.468  
70  
60  
75  
60  
75  
60  
75  
75  
-/+  
-/-  
31.469  
37.500  
-/-  
37.879  
+/+  
+/+  
-/-  
46.875  
48.363  
60.023  
+/+  
+/+  
67.500  
1280 x 1024  
63.981  
60  
+/+  
1280 x 1024  
1680 x 1050  
1920 x 1080  
79.976  
65.290  
67.500  
75  
60  
60  
+/+  
-/+  
+/+  
Recommend Mode  
Indicator  
Mode  
LED Color  
White  
On Mode  
Sleep Mode  
Off Mode  
Blinking White  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PROPER POSTURE  
27  
PROPER POSTURE  
Proper posture for using the Monitor set.  
Adjust the  
Monitor set and  
your posture to  
allow you to view  
images at the  
optimal viewing  
angle.  
Adjust the location of the  
Monitor set to avoid it  
reflecting light.  
Place your hands  
gently on the  
keyboard, keeping  
your arms bent at  
the elbows and  
horizontally outright.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
Trade Name: LG  
Model : 19MB35PMF,22MB35PMF,23MB35PMF  
Responsible Party: LG Electronics Inc.  
Address : 1000 Sylvan Ave. Englewood Cliffs  
NJ 07632 U.S.A  
TEL: 201-266-2534  
*above information is only for USA FCC Regulatory  
Make sure to read the Safety Precautions before  
using the product.  
Keep the Owner’s Manual (CD) in an accessible  
place for future reference.  
The model and serial number of the SET is  
located on the back and one side of the SET.  
Record it below should you ever need service.  
ENERGY STAR is a set of power-saving  
guidelines issued by the U.S.Environmental  
Protection Agency(EPA).  
As an ENERGY STAR Partner LGE  
U. S. A.,Inc. has determined that this  
product meets the ENERGY STAR  
guidelines for energy efficiency.  
MODEL  
SERIAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox International Inc Furnace ML180DFE SERIES User Manual
Lexmark Indoor Fireplace MONTEST User Manual
LG Electronics Car Video System LH T1000 User Manual
LG Electronics Refrigerator GR P227 L227 User Manual
Lifebreath Ventilation Hood 195TRV User Manual
Lopi Indoor Fireplace 864 ST User Manual
Makita Saw 5277B User Manual
Maytag Cooktop MGC4436BDB User Manual
Melissa Toaster 643 040 User Manual
Metra Electronics Car Amplifier 70 6506 User Manual