Kompernass Bread Maker SBB 850 EDS A1 User Manual

KITCHEN TOOLS

Bread Maker SBB 850 EDS A1

Bread Maker

Operating instructions

KOMPERNASS GMBH

BURGSTRASSE 21 · D-44867 BOCHUM

www.kompernass.com

ID-Nr.: SBB850EDSA1-02/10-V3

Download from Www.Somanuals.com. All Manuals Search And Download.

INDEX

PAGE

Safety Notices

Appliance Overview

Accessories

Intended Use

Before the first usage

Properties

Control panel

Programme

Timer-Function

Before baking

Baking bread

Error Messages

Cleaning and Care

Technical data

Disposal

Warranty and Service

Importer

Programme sequence

Troubleshooting the Bread Baking Machine

Read these operating instructions carefully before using the appliance for the first time and preserve this manual for later

reference. Pass this manual on to whoever might acquire the appliance at a future date.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 1 -

ƽ Safety Notices

•

If you use an extension cable, ensure that the

maximum permitted power rating for the cable

corresponds to that of the bread baking

machine.

Place the extension cable in such a way as to

prevent anyone from tripping over it or unin-

tentially pulling on it .

Always check the power cable and plug before

use. Should the power cable of the appliance

become damaged, to avoid the risk of injury

or a fatality it must be replaced by the manu-

facturer, the manufacturer's customer service or

a similarly qualified specialist.

The use of ancillaries not recommended by

the manufacturer could cause damage to the

appliance. Only use the appliance for its

intended purposes. Non-compliance invalida-

tes all claims under the warranty.

Start a baking programme only when a

baking mould is fitted in. If a mould is not fitted,

it could cause irreparable damage to the

appliance.

If children are in the vicinity, supervise the

app-liance particularly well! If the appliance

is not in use, and also before cleaning it,

remove the plug from the power socket. Allow

the appliance to cool down before removing

individual parts.

This appliance is not intended for use by

individuals (including children) with restricted

physical, physiological or intellectual abilities or

deficiences in experience and/or knowledge

unless they are supervised by a person respon-

sible for their safety or receive from this person

instruction in how the appliance is to be used.

Children should be supervised to ensure that

they do not play with the appliance.

This appliance complies with standard safety re-

gulations. Inspection, repair and technical main-

tenance may only be performed by a qualified

specialist. Non-compliance invalidates all claims

under the warranty.

•

Please read the operating instructions through

completely before using the appliance for the

first time!

•

Danger of suffocation! Children can suffocate

through the improper use of packaging materi-

als. Dispose of them immediately after unpak-

king or store them in a place that is out of

reach of children.

•

After unpacking, check the appliance for da-

mage that may have occurred during trans-

portation. If necessary, contact your supplier.

Place the appliance on a dry, flat and heat-

resistant surface.

Do not place the appliance near inflammable

materials or explosive/ignitable gases. A mini-

mum distance of 10 cm must be maintained to

all other materials.

•

Ensure that the ventilation slots of the appliance

are kept free at all times. Risk of overheating!

Before plugging the appliance in, check that

the electricity type and mains voltage matches

the information given on the type plate.

Do not place the power cable over sharp edges

or close to hot surfaces or objects. These may

damage the insulation of the power cable.

Never leave the appliance unsupervised

whilst in use.

To avoid the risk of tripping accidents the app-

liance is provided with a short power cable.

Only use the appliance inside buildings.

Never place the appliance on or close to a

gas or electric cooker, a hot oven or any

other source of heat. Risk of overheating!

Never cover the appliance with a tea-towel or

other material. Heat and steam must be able

to escape. A fire could occur if the appliance

is covered with an inflammable material or

comes into contact with inflammable

materials, e.g. curtains.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

- 2 -

•

Do not place any objects on the appliance and

do not cover it during operation. Risk of fire!

Caution! The bread maker becomes very hot

during operation. Do not touch the appliance

until it has cooled down, or use oven gloves.

Before taking out or inserting accessories,

unplug the power cable and allow the

appliance to cool down.

Do not transport the Bread Baking Machine if

the baking mould contains hot or fluid contents,

e.g. jams. There is a danger of being burnt!

During use, NEVER come into contact with the

rotating kneading paddles. There is also a risk

of personal injury!

•

When baking, never insert more than 700g of

flour and never add more than a 1 ¹/₄

packet (ca.26g) of dry yeast. The dough

could overflow and cause a fire!

•

Appliance Overview

ᕡ

ᕢ

ᕥ

Viewing window

Appliance lid

Ventilation slits

Power cable

Control panel

•

Do not pull on the cable to remove the plug,

rather, pull the plug itself from the socket.

When not in use, and before cleaning the

app-liance, remove the power cable from the

wall socket.

Caution! Hot surfaces!

Accessories

•

Do not use the Bread Baking Machine for the

storage of foods or utensils.

Never lay aluminium foil or other metallic

objects in the Bread Baking Machine. This

could lead to a short circuit. There would be a

risk of fire!

Never place the bread machine in water or

other liquids. Risk of fatal electrical shocks!

Do not clean the appliance with abrasive spon-

ge cleaning pads.

•

2 kneading paddles

Baking mould for bread weights up to 1250 g

Measuring cup

Measuring spoon

Kneading paddle remover

Concise instruction sheet

Recipe book

•

Operating manual

Should particles break away from the sponge

and come into contact with electrical compo-

nents, you could receive an electric shock.

Do not use an external timing switch or a separa-

te remote control system to operate the applian-

ce.

Never use the appliance without a baking

mould or with an empty one. This would

irreparably damage the appliance.

Always close the lid during operation.

NEVER remove the baking mould during

operation.

Intended Use

Use your Bread Baking Machine for baking bread

and making jams or marmaldes in domestic areas

only.

Do not use the appliance for drying foodstuffs or

other objects. Do not use the Bread Baking Machine

outdoors.

Use only the ancillaries recommended by the

manufacturer. Non-recommended accessories may

cause damage to the appliance.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

- 3 -

Before the first usage

ƽ Risk of fire! Do not allow the Bread Baking

Machine to warm up for more than 5 minutes

with an empty baking mould ᕧ. There is a

real danger of overheating.

Disposal of the packaging material

Unpack your appliance and dispose of the packa-

ging material in accordance with your local regula-

tions.

Properties

Initial cleaning

Wipe the baking mould ¶, kneading paddles ²

and outer surfaces of the bread baking machine

with a clean, damp cloth before putting it into opera-

tion. Do not use abrasive scrubbers or cleaning

powders. Remove the protective foil from the con-

trol panel ᕥ, as well as from the viewing window

ᕡ.

With this Bread Baking Machine you have the pos-

sibility to bake bread according to your taste.

•

You can choose from 12 different baking

programmes.

•

You can employ ready-to-use baking mixtures.

You can knead dough for buns and noodles

and also prepare marmalades and jams.

With the programme “Gluten Free” you can

bake gluten-free baking mixtures and recipes

with gluten-free flours, such as cornflour,

buckwheat flour and potato starch.

•

Pre-heating

ꢀ Please take note of the following notice

regarding the first usage:

For the first heating up ONLY, place the empty baking

mould ᕧ into the appliance. Close the appliance

lid ᕢ. Select the programme 12, as described in

the section "PROGRAMMMES“ then press the but-

ton Start/Stop ạ, to warm up the appliance for 5

mi-nutes. To terminate the programme, after 5 minutes

press the button Start/Stop ạ until a long signal

tone is heard.

As the heating elements are lightly greased, a

slight smell may occur when first putting the appli-

ance into operation. This is harmless and stops

after a short time. Provide for sufficient ventilation,

for example, open a window.

Allow the appliance to cool down completely and

once again wipe the baking mould ᕧ, kneading

paddles ᕦ and the outer surfaces of the Bread

Baking Machine with a clean moist cloth.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 4 -

Control panel

To interrupt the operation, briefly press the Start/Stop

button ạ until a signal tone sounds and the time in

the display Ạ flashes. By once again pressing the

Start/Stop button ạ within 10 minutes, the opera-

tion can be continued. Should you forget to re-start

the programme, after 10 minutes it will be automa-

tically continued.

Ạ

750g

1000g 1250g

To completely terminate the operation or to delete

a programming, press the Start/Stop button ạ for

3 seconds, until long signal tone sounds.

ạ

Ầ

ấ

Ả

ả

Ấ

ƽ Note:

Do not press the Start/Stop button ạ if you want

to simply check the condition of the bread. You

can watch the baking operation through the vie-

wing window.

ቢ

ባ

ቧ

ƽ Please note:

When pressing all buttons an acoustic signal must

be audible, unless the appliance is in operation.

Ả Level of browning (or Rapid modus)

Select the browning level or switch into the Rapid

modus (light/medium/dark/Rapid). Press the

Browning Level button Ả repeatedly, until the

arrow is located above the desired browning level.

For the Programmes 1 - 4 you can, through repea-

ted pressing of the Browning Level button Ả ,

activate the Rapid modus to shorten the baking

process. Press the Browning Level button Ả

repeatedly until the arrow appears over "Rapid". A

browning level cannot be selected with the

programmes 6, 7 and 11.

ቦ

ብ ቤ

Ạ Display

Display for

ቢ

ባ

ቤ

selection of the weight

(750 g, 1000 g, 1250 g)

the remaining baking time in minutes and

the programmed time

the selected level of browning (light

medium

, dark

, Rapid

)

ብ

ቦ

ቧ

the selected program number

the programme sequence

the addition of ingredients („ADD“)

ả Timer ▼ ▲

Time-delayed baking.

ạ Start / Stop

To start and stop an operation or to delete a

time-programming.

ƽ Note:

Time-delayed baking cannot be arranged with

Programme 11.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 5 -

Ấ Operation indicator lamp

Programme

The operation indicator lamp Ấ indicates with its

glowing that a programme is currently running. If

you want to start a programme time-delayed by

using the timer function, the operation indicator

lamp Ấ first glows when the programme itself

starts, not when the timer is activated.

Select the desired programme with the button Pro-

gramme selection Ầ. The corresponding programme

number is shown in the display Ạ. The baking times

are dependant on the selected Programme combi-

nations. See the chapter "Programme sequence“.

ấ Bread weight

Programme 1: Regular

Select the bread weight (750 g / 1000 g / 1250 g).

Press the button repeatedly until the arrow appears

under the desired weight. The weight details (750 g /

1000 g / 1250 g) relate themselves to the amount

of ingredients placed in the baking mould ᕧ.

For white and mixed breads mainly consisting of

wheat flour or rye flour. The bread has a compact

consistency. Set the browning of the bread with the

button browning level Ả.

Programme 2: French

ƽ Note:

For light breads from well-milled flour. As a rule,

the bread is light and has a crispy crust.

The default setting when switching the appliance

on is 1250 g. You cannot adjust the bread weight

with the Programmes 6, 7, 11 and 12.

Programmme 3: Whole Wheat

For breads made from robust flours, e.g. whole

wheat flour and whole rye flour. The bread will

be more compact and heavy.

Ầ Programme selection (Menu)

Call-up of the desired baking programme (1-12).

In the display Ạ appears the Programme number

and the corresponding baking time.

Programmme 4: Sweet

For breads with ingredients like fruit juices, coconut

flakes, raisins, dried fruit, chocolate or additional

sugar. Due to an extended rising phase the bread

will be lighter and airier.

Memory Function

When being switched on again after a power failure

of up to approx. 10 minutes, the program will con-

tinue from the same point. This is however not valid

when erasing/terminating the baking process or

pressing the button Start/Stop ạ until an extended

signal tone sounds.

Programmme 5: Super Rapid

Less time is required for kneading, rising and baking.

For this Programme, however, use only such reci-

pes that do not contain any heavy ingredients or

heavy varieties of flour. Note that in this program-

me the bread is less aerated and may not be quite

so tasty.

Viewing window ᕡ

You can observe the baking process through the

window ᕡ.

Programmme 6: Dough (kneading)

For the preparation of yeast dough for buns, pizza

or plaits. In this Programme no baking is done.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 6 -

Programmme 7: Pasta

For the preparation of pasta dough. In this

Programme no baking is done.

If you have set the timer, you can put all the ingre-

dients into the baking mould ¶ at the beginning.

In this case, however, fruits and nuts should be cut

into smaller pieces before inserting them.

Programmme 8: Buttermilk bread

For breads made with buttermilk or yoghurt.

Timer-Function

Programme 9: Gluten Free

For breads made of gluten-free flours and baking

mixtures. Gluten-free flours require longer for the

absorption of liquids and have differing rising

properties.

The timer function allows you to do time-delayed

baking.

With the arrow buttons ▲ and ▼ ả enter in the

desired completion time for the baking process.

The maximum time delay amounts to 15 hours.

Programmme 10: Cake

In this programe the ingredients are kneaded,

allowed to rise and then baked. Use baking

powder for this programme.

ƽ Warning! Before you bake a particular type

of bread with time delay first try out the recipe

under observation, to ensure that the

relationships of the ingredients to each other

are correct, the dough is not too firm or too

thin, and that the amounts are not too large

and could possibly overflow. Risk of fire!

Programmme 11: Jam

For making jams, preserves, jellies and fruit

spreads.

Programmme 12: Bake

Select a Programme. The display Ạ indicates the

required baking time.

For the after-baking of breads that are not brown

enough, not baked through or ready-made dough.

All kneading and rising processes are dispensed

with in this programme. The bread is kept warm for

up to one hour after the baking process. This prevents

the bread from becoming too moist.

Programmme 12 bakes the bread for 60 minutes.

To terminate these functions prematurely, press the

Start/Stop button ạ until a long signal tone is

heard. To switch the appliance off, remove the

power plug from the wall socket.

With the arrow key ▲ ả you can postpone the

end of the Programme. The first activation pushes

the completion time back to the next full interval of

10 minutes. Each subsequent activation of the arrow

key ▲ ả pushes the completion time back by

10 minutes. You can accelerate this procedure by

holding the button pressed down. The display shows

you the whole period of the baking time and delay

time. On a possible exceeding of the possible time

delay you can correct the time with the arrow button

▼ ả. Confirm the programming of the timer with

the Start/Stop button ạ. The colon on the display

Ạ flashes and the programmed time starts to run.

As soon as the programme starts, the operating

indicator lamp Ấ glows.

ƽ Note:

With the programmes 1, 2, 3, 4, 5, 6, 8 and 9 a

signal tone sounds during the programme process

and „ADD“ ቧ appears in the display.

As soon as possible after it sounds add the other

ingredients, such as fruit or nuts.

When the baking process has been completed, ten

acoustic signals are sounded and the display Ạ

indicates 0:00.

The ingredients will not be crushed by the

kneading paddle ².

Download from Www.Somanuals.com. All Manuals Search And Download.

- 7 -

Example:

Baking bread

It is 8:00 a.m. and you would like to have fresh

bread in 7 hours and 30 minutes, in other words

at 3:30 p.m.

First of all select Programme 1 and then press the

arrow button ả until 7:30 appears in the display

Ạ, as the time period to be allowed for comple-

tion is one of 7 hours and 30 minutes.

ꢀ Note: The timer function cannot be activated

with the Programme "Jam".

Preparation

Pay heed to the safety instructions in this manual.

Place the Bread Baking Machine on a level and

firm surface.

1. Pull the baking mould ¶ upwards and out of

the appliance.

2. Push the kneading paddles ² onto the drive

shafts in the baking mould ¶. Make sure they

are firmly in place.

ƽ Note

3. Place the ingredients for your recipe into the

baking mould ¶ in the specified order. First

add the liquids, sugar and salt, then the flour,

adding the yeast as the last ingredient.

With time delayed baking please do not use

perish-able ingredients such as milk, eggs, fruit,

yoghurt, onions etc.

ƽ Note

Before baking

Ensure that the yeast does not come into contact

with salt or fluids.

For a successful baking process, please consider

the following factors:

4. Place the baking mould ¶ back in the applian-

ce. Ensure that it engages correctly.

5. Close the appliance lid ᕢ.

Ingredients

ƽ Note

6. Insert the power plug into the wall socket.

A signal tone sounds and in the display Ạ

appears the Programme number and the time-

duration for Programmme 1.

7. Select your programme with the Programme

select button Ầ. Each input is confirmed with

a signal tone.

Take the baking mould ¶ out of the housing befo-

re putting in the ingredients. Should ingredients

drop into the baking area, a fire may be caused

by them burning on the heating elements.

•

Always place ingredients into the baking

mould ¶ in the sequence specified .

All ingedients should be at room temperature,

to ensure an optimal rising result from the

yeast.

8. If necessary, select the size of bread you want

to bake with the button ấ.

•

9. Select the browning level Ả for your bread.

In the display Ạ the arrow shows you what

you have selected, light, medium or dark.

Here you can also select the setting "Rapid" to

shorten the time period in which the dough

rises.

•

Ensure that you measure the ingredients precisely.

Even negligible deviations from the quantities

specified in the recipe may affect the baking

results.

ƽ Note

NEVER use quantities larger than those specified.

Too much dough could rise out of the baking

mould ¶ drop onto the hot heating elements and

cause a fire.

A browning level cannot be selected with the pro-

grammes 6, 7 and 11.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 8 -

The function "Rapid" is only available with

Programmes 1-4.

A bread weight level cannot be selected with the

Programmes 6, 7, 11 and 12.

At the end of the programme the appliance auto-

matically changes to a keep-warm mode for up to

60 minutes.

ƽ Note

10. You now have the option of setting the end time

of your programme using the timer function.

You can enter in a maximum time delay of up

to 15 hours.

This is not applicable to Programmes 6, 7 and 11.

In this mode, warm air circulates inside the

appliance. The keep warm period can be

prematurely terminated by pressing down the

Start/Stop button ạ until the signal tone sounds.

ƽ Note

This function is not available for Programmme 11.

ƽ Warning

Starting the Programme

Now start the programme with the Start/Stop button

ạ.

Before opening the appliance lid ᕢ remove the

power plug from the wall socket.

When not in use, the appliance should never be

plugged in!

ꢀ Note: The Programmes 1, 2, 3, 4, 6, 8 and

9 start with a 10 to 30 minute pre-heat phase

(except Rapid, see Table for Programme

Sequences). The kneading paddles ² do not

move themselves. That is not an error of the

machine.

Taking out the bread

When handling the hot baking mould, ¶ always

use pot holders or oven gloves.

Hold the baking mould ¶ tilted over a grid and

shake it lightly until the bread slides out of the

baking mould ¶.

The Programme automatically carries out the

various operations.

If the bread does not slip off the kneading paddles

², carefully remove the kneading paddles ²

using the supplied kneading paddle remover µ.

You can watch the programme sequence via

the window ᕡ of your Bread Baking Machine.

Occasionally, condensation may collect in the win-

dow during baking ᕡ. The appliance lid ᕢ can

be opened during the kneading phase.

ƽ Note

Do not use any metal objects which may cause

scratches on the non-stick coating.

After removing the bread, immediately rinse the

baking mould ¶ with warm water. This prevents

the kneading paddles ² from sticking to the

driving shaft.

ƽ Note

Do not open the appliance lid ᕢ during the rising

or baking phases. The bread could collapse.

Ending the Programme

When the baking process has been completed, ten

acoustic signals are sounded and the display Ạ

indicates 0:00.

Tip: If you remove the kneading paddles ² after

the last kneading of the dough, the bread will

remain intact when you remove it from the

baking mould ¶.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 9 -

•

Briefly press the Start/Stop button ạ to interrupt

the programme at the very start of the baking

phase or, remove the power plug from the wall

socket. Ensure that you re-insert the power plug

within 10 minutes so that the baking process can

be continued.

Open the appliance lid ᕢ and remove the

baking mould ¶. You can take the dough out

with floured hands and remove the kneading

paddles ².

Lay the dough back into the baking mould ¶.

Replace the baking mould ¶ and close the

appliance lid ᕢ.

Insert the power plug into the wall socket. The

baking programme continues from where it

was stopped.

ƽ Warning

Do not attempt to take the appliance into use befo-

re it has cooled itself down. This functions only with

programmes 11 and 12.

• If the display shows "EE0", "EE1" or "LLL" after

the programme has been started, first of all

switch the Bread Baking Machine off and then

back on by removing and then re-inserting the

power plug from/into the wall socket. Should the

error display continue, make contact with

Customer Services.

•

Cleaning and Care

ƽ Warning

Allow the bread to cool for 15-30 minutes before

eating it.

Before cutting the bread, ensure that the kneading

paddles have been removed ².

Before cleaning it, always remove the power plug

from the wall socket and allow the appliance to

cool down completely.

Protect the appliance against moisture, this could

cause you to receive an electric shock.

Error Messages

Please also observe the safety instructions.

• If the display Ạ shows "HHH" after the program-

me has been started, it indicates that the tempe-

rature in the Bread Baking Machine is still too

high. Stop the programme and remove the power

plug. Open the appliance lid ᕢ and allow the ma-

chine to cool down for 20 minutes before re-

using it.

• If a new Programme cannot be started directly

after the Bread Baking Machine has completed

a baking process, it means the appliance is still

too hot. In this case the display panel reverts to

the default setting (Programmme 1). Open the

appliance lid ᕢ and allow the machine to cool

down for 20 minutes before re-using it.

ƽ Important

The appliance and its ancillaries are not suitable

for being cleaned in a dish washing machine!

Housing, lid, baking space

Remove all particles left behind inside the baking

area using a wet cloth or a slightly wet soft spon-

ge. Wipe the housing and the lid too, only with a

moist cloth or sponge.

•

Ensure that the interior is completely dry. For

easier cleaning, the appliance lid ᕢ can be

removed from the housing:

Open the appliance lid ᕢ until the wedge-

shaped hinge cams pass through the ope-

nings of the hinge guides.

Pull the appliance lid ᕢ out of the hinge guides.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 10 -

•

To reassemble the appliance lid ᕢ, guide the

hinge cams through the opening of the hinge

guides.

Technical data

Model:

Bread Baking Machine

SBB 850 EDS A1

Baking moulds and kneading paddles

The surfaces of the baking mould ¶ and kneading

paddles ² have a non-stick coating. When clea-

ning the appliance do not use aggressive deter-

gents, cleaning powders or objects that may cause

scratches to the surfaces.

Nominal voltage:

Power consumption:

220-240V 50Hz

850 Watt

Disposal

Do not dispose of the appliance in

your normal domestic waste. This pro-

duct is subject to the European guideli-

ne 2002/96/EC.

Due to moisture and vapours the surfaces of

various parts may undergo changes in their appe-

arance over a period of time. This has no influence

on the function nor does it reduce the quality of the

baking results.

Dispose of the appliance through an approved dis-

posal centre or at your community waste facility.

Observe the currently applicable regulations.

In case of doubt, please contact your waste disposal

centre.

Before cleaning, take the baking mould ¶ and

kneading paddles ² out of the baking area.

Wipe the outside of the baking mould ¶ with a

moist cloth.

Dispose of all packaging materials in an

environmentally friendly manner.

ƽ Important

Never submerse the baking mould ¶ in water or

other liquids.

Clean the interior areas of the baking mould ¶

with warm soapy water.

If the kneading paddles ² are encrusted and it is

difficult to dissolve, fill the baking mould ¶ with hot

water for approx. 30 minutes.

If the mountings of the kneading paddles ² are

clogged, you can clean them carefully with a wooden

toothpick.

Do not use any chemical cleaning agents or solvents

to clean the Bread Baking Machine.

Download from Www.Somanuals.com. All Manuals Search And Download.

- 11 -

Warranty and Service

Importer

You receive a 3-year warranty for this device as of

the purchase date. The device has been manufactu-

red with care and meticulously examined before

delivery.

KOMPERNASS GMBH

BURGSTRASSE 21

D-44867 BOCHUM

Please retain your receipt as proof of purchase. In

the case of a warranty claim, please make contact

by telephone with our service department. Only in

this way can a post-free despatch for your goods

be assured.

www.kompernass.com

The warranty covers only claims for material and

manufacturing defects, but not transport damage,

worn parts or damage to fragile components, e.g.

buttons or batteries. This product is intended for do-

mestic use only, it is not intended for commercial

applications.

In the event of misuse and improper handling, use

of force and modifications not carried out by our

authorized service branch, the warranty will beco-

me void. Your statutory rights are not restricted in

any way by this warranty.

The warranty period is not extended by repairs

made under the warranty. This applies also to re-

placed and repaired parts. Damages or defects di-

scovered after purchase are to be reported directly

after unpacking, at the latest two days after the pur-

chase date.

Repairs carried out after lapse of the warranty peri-

od are subject to charge.

DES UK LTD

Tel.: 0871 5000 700 (£ 0.10 / minute)

e-mail: [email protected]

Kompernass Service Ireland

Tel: 1850 930 412 (0,082 EUR/Min.)

Standard call rates apply. Mobile operators may vary.

e-mail: [email protected]

Download from Www.Somanuals.com. All Manuals Search And Download.

- 12 -

Programme sequence

Programme

1. Regular

2. French

Light

Medium

Dark

Light

Medium

Dark

Level of browning

Size

Rapid

750 g 1000 g 1250 g 750 g 1000 g 1250 g 750 g 1000 g 1250 g 750 g 1000 g 1250 g

Time (Hours)

Preheat (Min)

Kneading 1 (min)

Rise 1 (Min)

Kneading 2 (min)

Rise 2 (Min)

Rise 3 (Min)

Bake (min)

2:58

3:05

3:15

2:14

N/A

2:20

N/A

2:25

N/A

3:13

3:18

3:25

2:18

N/A

2:25

N/A

2:30

N/A

3A*

Keep-Warm time

(Min)

Insert ingredients

(Time remaining)

2:01