Kodak Scanner A 61583 User Manual

Kodak Scan Station 100 Pre-installation Worksheet  
It is recommended that you fill out this worksheet before installing the Kodak Scan Station 100. You will  
need this information about your network to create an administrative configuration for your Scan Station  
using the Configuration Organizer (provided with the Scan Station) and to complete the installation.  
Research any information you are unsure of before creating the administrative configuration file. If you  
have trouble filling out this worksheet, see the person who manages your network.  
NOTE: This installation shows what you will need to install the Scan Station as of the date of this  
document. As we improve our products from time to time, check the Kodak website  
Language Settings — found under the Settings button in the Configuration Organizer or  
Administration GUI.  
Parameter Name  
Language  
Description/Sample  
Your Setting  
Notes  
Name of GUI/OCR language  
Default: English.  
Device Settings — found under the Settings button in the Configuration Organizer or  
Administration GUI.  
Parameter Name  
Device Name  
Description/Sample  
Your Setting  
Notes  
NETBIOS name of the Scan  
Station. The default is the Scan  
Station’s unique serial number  
(e.g., KSSXXXX-XXXX, where  
X=the serial number)  
It is recommended that you do not  
change this setting. Must be unique  
(up to 15 characters) on the network/  
subnet. You can leave this field  
unchanged as ”Scan-Station” to  
avoid overwriting an existing device  
name. See Chapter 5, Scan Station  
Administration Specifics for more  
information.  
IP Address Settings — Automatic  
Automatic (DHCP)  
This is the default.  
If selected, the IP address, subnet  
mask, and DNS server of the Scan  
Station are set automatically by the  
DHCP server.  
IP Address Settings — Static  
Static (IPv4)  
Standard IPv4 address  
(e.g., 192.0.0.1)  
Scan Station’s IP address  
Complete this and the other  
network sections only if you are  
not using DHCP.  
• IP Address  
• Subnet Mask  
Scan Station’s Subnet Mask (e.g.,  
255.255.255.0)  
Only these numbers are allowed: 0,  
128, 192, 224, 248, 252, 254 and 255.  
• Default Gateway  
IP of default gateway on the  
network  
• Preferred DNS  
Server  
IP of domain name Server #1  
If this number is incorrect, you may  
not be able to reach some network  
locations.  
• Alternate DNS  
Server  
IP of the alternate domain name  
Server #2  
• Preferred WINS  
Server  
IP of Windows Internet Name  
Server #1  
January 2008  
A-61583  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Email Server Settings — found under the Settings button in the Configuration Organizer or  
Administration GUI.  
Parameter Name  
SMTP Settings  
Description/Sample  
Your Setting  
Notes  
Fully qualified domain name or  
IPv4 address of the SMTP server  
(e.g., smtp-server.  
Use IPv4 to eliminate any DNS issues  
when troubleshooting.  
• Server Address  
company.com or 192.0.0.1).  
User name, password and network  
domain. Required to access the  
SMTP server.  
Required for authenticated SMTP.  
NOTE: This is not necessarily the  
same as the credentials defined  
under Device Settings.  
• Credentials  
Default: 25  
Only change if your email server  
communicates on an IP port that is  
not Port 25.  
• Port  
• SSL  
Secure Socket Layer  
Typically unchecked. Check only if  
you are sure your email server  
requires it.  
LDAP Settings  
Fully qualified domain name or  
IPv4 address of the LDAP server  
(e.g., ldap-server.  
Use IPv4 to eliminate any DNS issues  
when troubleshooting.  
• Server Address  
company.com or 192.0.0.1).  
User name, password and network  
domain. Required to access the  
LDAP server.  
Required for authenticated LDAP.  
NOTE: This is not necessarily the  
same as the credentials defined  
under Device Settings.  
• Credentials  
Default: 389  
Only change if your LDAP server  
communicates on an IP port that is  
not Port 389.  
• Port  
Base Distinguished Name  
Default: cn  
Contact your corporate LAN  
administrator for more details on this  
setting.  
• Base DN  
Contact your corporate LAN  
administrator for more details on this  
setting.  
• Common Name  
Tag  
Default: email  
Contact your corporate LAN  
administrator for more details on this  
setting.  
• Email Address  
Tag  
Return Email  
Address  
This is the address that bounced  
emails are returned to (e.g.,  
address will also appear as the  
“From” address when sending  
email.  
Select a person who will receive  
notification that an email address  
could not be reached.  
Maximum  
Attachment Size  
1-99 MB  
Default: 10 MB  
Email operations that create files  
larger than this will fail. This should  
match the limitations defined by  
your email server.  
Custom Email  
Addresses  
Enables/disables the custom Email  
address option, allowing the entry  
of email addresses that do not  
appear in your address book.  
Typically enabled; may be disabled in  
more secure environments.  
January 2008  
A-61583  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A-61583  
January 2008  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Heat Pump 650937 XX3 User Manual
Inter Tel Telephone 8524 User Manual
Jabra Wireless Office Headset 14201 35 User Manual
JBL Portable Speaker HP6B User Manual
JVC Speaker System UX QD90B User Manual
Kenyon Cooktop UL C UL User Manual
King Canada Sander KC 689 OSC 7 User Manual
KitchenAid Cooktop KGCU467 User Manual
KitchenAid Microwave Oven KHMC107E User Manual
KitchenAid Microwave Oven KHMS1850SBL0 User Manual