Users' Guide
How To Operate And Enjoy Your
VR-5900
Download from Www.Somanuals.com. All Manuals Search And Download.
B60-5016-00 00 CH (K,P) OC 0011
Table of Contents
Chapter One: Moving Around ................................. 1
What’s on the Front Panel of Your Kenwood Audio - Video
Receiver? ................................................................................... 2
What’s on PowerTouch? ........................................................... 3
What’s on PowerTouch’s Screen? ............................................ 4
The Quick Access Menu:...........................................................5
How is PowerTouch Powered? ................................................. 5
How Do I Use PowerTouch?..................................................... 6
How Do I Move Around? ........................................................ 7
How Do I Enter Text?............................................................... 8
Chapter Two: Using PowerTouch ............................ 9
How Do I Adjust the Sound? ................................................. 10
Turning the Speakers On ........................................................ 10
Adjusting the Volume ............................................................. 11
Adjusting the Loudness (Only in STEREO mode with THX
mode Off) ........................................................................... 11
Adjusting the Tone (Only in STEREO mode with THX
mode Off) .......................................................................... 12
Adjusting Speaker Levels ................................................... 13
Muting Sound .................................................................... 15
Midnight Theater Function (Dolby Digital, DTS and DTS-
ES only) .............................................................................. 16
i
Download from Www.Somanuals.com. All Manuals Search And Download.
To balance volume extremes ................................................. 16
How Do I Adjust the Surround modes?................................. 17
What are THX? ....................................................................... 17
What are Listen Modes?......................................................... 18
To check the Surround Play status ......................................... 21
Input Modes ........................................................................... 22
To Set the Input Mode manually .......................................... 23
To Set the THX mode ............................................................. 24
To Set the Listen Mode manually ......................................... 26
Selectable Listen modes ........................................................ 27
Selecting the Pro Logic mode with PowerTouch ................. 28
Description of Dolby Pro Logic II: Music modes ................ 29
Applying Digital Signal Processor (DSP) Effects ................. 30
HDCD® and D.R.I.V.E. Effects (THX Off mode only ) ........ 33
Headphone Operation .......................................................... 34
How Do I Operate Devices? ................................................... 35
Operating PowerTouch without Sending Commands to the
Receiver (Operations using the SHIFT key):.................... 36
HOME1, HOME2 Devices..................................................... 37
Playback of the device connected to the CD2/TAPE2
MONITOR.......................................................................... 39
CD player ................................................................................ 40
Kenwood System Connected 200-Disc CD Changer .......... 40
To play KENWOOD 200-Disc CD Changer (without system
connection) using PowerTouch: ....................................... 46
SingleCD or Carrousel CD Player .......................................... 51
CD-R Recorder ....................................................................... 52
MD Recorder .......................................................................... 53
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Deck ............................................................................... 55
Turntable ................................................................................ 56
Tuner ....................................................................................... 57
TV ........................................................................................... 62
VCR/PVR ................................................................................. 66
DVD Player ............................................................................. 67
Laser Disc Player .................................................................... 68
Operation on the More menu .............................................. 69
How Do I Record (Edit Mode)? ............................................ 59
Digital to Digital Recording: .................................................. 61
Digital to Analog Recording:.................................................. 61
How Do I Record (Edit Mode)? .............................................70
How Do I Adjust PowerTouch’s Display?............................... 73
How Do I See PowerTouch’s Screen More Clearly? ............. 74
How Do I Turn the Beeping On or Off?............................... 74
Using PowerTouch to Dim or Brighten the Receiver’s Front
Panel ................................................................................... 75
How Do I Perform Several Actions at Once? ......................... 76
Creating Macros ..................................................................... 77
Modifying a macro ................................................................ 78
Using Macros.......................................................................... 80
How Do I Control Home Automation Equipment? (for U.K.
only) ....................................................................................... 82
To switch on or switch off the RELAY CONTROL output
using PowerTouch ............................................................. 82
X-10 Home Automation ........................................................ 83
Lutron ..................................................................................... 85
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Makita ................................................................................. 86
Accessories Control ............................................................ 88
Chapter Three: Using PowerTouch in Multiple Zones
............................................................................ 90
How Do I Switch Control Modes? .................................... 91
Why Don’t I See All My Devices?...................................... 92
How Do I Operate Devices? .............................................. 93
Operating Devices in Zone A ............................................ 93
Operating Devices in Zone B ............................................ 93
Chapter Four: Troubleshooting ............................. 94
Sound ...................................................................................... 96
I don’t hear any sound at all ................................................. 96
Audio is not output only when a 96k fs compatible disc is
played. ................................................................................ 96
I can’t hear sound from one or more of the speakers, or the
sound is abnormally low .................................................. 96
The 96k fs indicator does not light while a 96k fs compatible
disc is being played. .......................................................... 97
I can’t hear sound from my surround or center speakers ... 97
I can hear sound only from the center speaker when Dolby
Pro Logic is selected .......................................................... 97
A DTS-ES encoded source is played but it is not decoded in
DTS-ES. ............................................................................... 97
A Dolby Digital Surround EX-encoded source is played with
THX Surround EX set to “Auto”, but the source is not
reproduced in 6.1-channel audio..................................... 98
Sound from one (or more) of my devices is abnormally loud
or soft. ................................................................................ 98
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
I can’t hear any sound in Zone B .......................................... 99
I can’t hear sound from some of my laser discs .................. 99
There wasn’t any sound recorded on tapes made on my
VCR or tape deck ............................................................... 99
The initial sound is intermittent or non-existent when I start
to play from a Dolby Digital, DTS, DTS-ES or MPEG
source ................................................................................100
With a Dolby Digital program or DTS program, the loud
sounds aren’t very loud and the quiet sounds aren’t very
quiet...................................................................................100
All I hear is loud static when I play DTS discs ....................100
I hear a hum when I select the PHONO input ...................100
Audio is not output only when a 96 kfs compatible disc is
played. ...............................................................................100
Sound is intermittent............................................................100
Video ...................................................................................... 101
I can’t see the program I’m playing on the TV
There wasn’t any video output to my VCR when I recorded
............................................................................................ 101
PowerTouch ........................................................................... 101
I don’t see icons for all my devices ...................................... 101
I don’t see icons for all the devices I set up ........................ 101
When I select a device icon, I don’t see any commands .... 101
My PowerTouch is slow to respond—sometimes I have to
press buttons or select commands several times ........... 101
My PowerTouch is not responding ......................................102
My PowerTouch is beeping. What does that mean? ...........102
PowerTouch does not "learn" new commands or functions
............................................................................................102
v
Download from Www.Somanuals.com. All Manuals Search And Download.
I want to clear all the items in PowerTouch and make it to
the factory-set default condition. ....................................102
Receiver/Tuner .......................................................................103
My receiver won’t turn on and the STANDBY indicator is
flashing ..............................................................................103
The sound is distorted, and the CLIP indicator on the
receiver’s front panel flashes red continually, or stays red
for more than 1 second at a time ....................................104
I can’t access any RDS (Radio Data System) functions (for
U.K. only) ..........................................................................105
I can’t receive a radio station ...............................................105
I’m getting a lot of static/interference .................................105
When I press a key to tune to a preset station, the receiver
does not respond ..............................................................105
Macro is not running as I programmed. .............................106
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter One: Moving Around
Welcome to the Kenwood VR-5900 Users’ Guide. This chapter explains
the buttons and functions you can find on the front of the receiver and
on the PowerTouch. The chapter also includes an explanation of how to
navigate the convenient graphical display on your new PowerTouch.
It includes the following sections:
What’s on the Front Panel of Your Kenwood Audio - Video Receiver?
page 2
What’s on PowerTouch?
page 3
page 5
page 6
How is PowerTouch Powered?
How Do I Use PowerTouch?
1
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s on the Front Panel of Your Kenwood Audio-Video Receiver?
15. AV-AUX input jacks
16. DOOR OPEN/CLOSE button
17. VOLUME CONTROL knob
18. INPUT SELECTOR buttons
19. Indicators
2
1
24
23
22
21
20
19
DTS-ES
DISCRETE 6.1 MATRIX 6.1
SURROUND
BACK
CD
2
/
TAPE
2
CLIP
NEO
:
6
PRO LOGIC
96kfs
MONITOR INDICATOR
SURROUND BACK
96 k fs
18
VOLUME CONTROL
THX
DTS
DOLBY DIGITAL
MPEG
HDCD
STANDBY
CD2/TAPE2 MONITOR
CLIP INDICATOR
20. Indicators
D.R.I.V.E.
REMOTE POWER
¤
INPUT SELECTOR
‹
17
16
DOOR
OPEN/CLOSE
ON/STANDBY
DOWN
VIDEO
UP
AV AUX
-
S
VIDEO
L
-
AUDIO
-
R
PHONES
THX
DTS
D. R. I. V. E.
INPUT CD 2/TAPE
2
LISTEN
MULTI
CONTROL
A
SPEAKERS
B
P.CALL
MEMORY
AUTO
BAND
fi
%
fi
%
MODE
MONITOR MODE
THX
SOUND
SET UP
Buttons be-
h in d th e
door
RF
RF BAND DISPLAY
DOLBY DIGITAL
MPEG
ON/OFF
3
4
6
8
10 11 12 14
13
15
HDCD
5
7
9
21. Display
22. 2-way communication indicator
23. Indicators
DTS-ES DISCRETE 6.1
DTS-ES MATRIX 6.1
NEO : 6
1. STANDBY indicator
7. LISTEN MODE button/DISPLAY button
8. THX button
2. REMOTE POWER ON/STANDBY button
3. PHONES jack
9. SOUND button/SET UP button
10. MULTI CONTROL (Up/Down) buttons
11. P. CALL (Up/Down) buttons
12. MEMORY button
PRO LOGIC
4. SPEAKERS A/B buttons
5. INPUT MODE button /
RF ON/OFF button
24. Infrared remote transmitter
Buttons 4 to 14 are located behind the door.
6. CD 2/TAPE 2 MONITOR button /
RF BAND button
13. AUTO button
14. BAND button
Standby mode
While the standby indicator of the unit is lit, a small amount of current is flowing into the unit’s internal circuitry to back up the memory. This condition
is referred to as the standby mode of the unit. While the unit is in the standby mode, it can be turned ON from the remote control unit.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s on PowerTouch?
What’s on PowerTouch?
8
9
10
1
ENTER
2
CONFIRM
UP
3
MUTE
DOWN
4
CONTRAST
SYS.POWER
BACKLIGHT
5
6
7
1. Joystick (see page 7)
2. CONFIRM button
3. MUTE button (see page 15)
4. VOLUME UP/DOWN button (see page 11)
5. CONTRAST button
6. SYS. POWER button
7. BACKLIGHT button (see page 73)
8. Quick Access menu
9. Touch screen display
10. Stylus (stored on top edge)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
What’s on PowerTouch?
What’s on PowerTouch’s Screen?
PowerTouch’s LCD display screen is divided into two sections: the Quick
Access Menu and the Device Control/Menu Section. Use the stylus to
touch the buttons in each area.
Device
Control/Menu
Quick Access
Section
Menu
An example of HOME 1 menu
Device control buttons
HOME 1 button
EDIT button
HOME 2 button
SETUP button
Customize button, communication indicator etc.
The Quick Access Menu:
The buttons in the Quick Access Menu are always available, regardless of
what else is displayed on the touch screen. Touch these buttons for in-
stant access to:
•
Home1, Home2 : Music and movie device controls such as CD play-
ers, the radio tuner or VCRs.
•
•
•
•
Editing features
Setup features
Listen modes such as stereo, Dolby Digital or DTS
Sound controls, such as loudness or “Midnight” mode
4
Download from Www.Somanuals.com. All Manuals Search And Download.
How is PowerTouch Powered ?
The Device Control/Menu Section: The device control section provides
the same kinds of access as the Quick Access menu, but with more struc-
ture. Use the Main menu to navigate through the feature menus to ex-
actly the feature or device you want to use.
Using these features, your Kenwood PowerTouch can store and display a
large number of tasks, making it easier for you to access features. You get
all the advantage of on-screen graphical display, without having to use a
TV screen!
For m ore inform ation on using these icons, see “How Do I Use
PowerTouch?” on page 6.
How is PowerTouch Powered ?
Your new PowerTouch uses four C (LR14) alkaline batteries and operates
in the following range:
RF Remote
Antenna
VOLUME CONTROL
20 ft
(6m)
IR Transmitter
ENTER
UP
CONFIRM
o
DOWN
CONTRAST
ON/STANDBY
REMOTE OFF
If you use PowerTouch outside of this range, PowerTouch’s display may
show incorrect information, or may not operate.
The remote control signal received by the main unit is only the RF signal.
The control distance of the RF remote signal is about 10 meters provided
there is no obstacle.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use PowerTouch?
As you use PowerTouch, be aware of the following:
•
When PowerTouch’s operating range gets shorter or PowerTouch dis-
plays a low battery alarm, replace all 6 batteries. (see “Installing the
Batteries” on page 34 of the Connections and Setup Guide.)
•
Do not install the receiver where direct sunlight or high-frequency
fluorescent lighting can shine directly into the infrared remote sen-
sor. This can limit PowerTouch’s operating range.
How Do I Use PowerTouch?
Use your new PowerTouch to control your new receiver and most devices
attached to it. PowerTouch appears and functions a little differently from
traditional remotes. Because it can control so many different devices, it
displays a separate set of controls for each device on an LCD screen.
Only devices you have identified and connected to the receiver appear as
buttons on the touch screen. If you are “missing” a device’s icon on the
Home1 or Home2 screen, make sure you have identified the device to
the PowerTouch. For more information on identifying devices to the
PowerTouch, see “Chapter Two: Setting Up PowerTouch” in the Connec-
tions and Setup Guide.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use PowerTouch?
Do not block the IR transmitter on the front panel of the receiver or on
PowerTouch. Even a brief blockage while it is transmitting (such as some-
one walking by) can cause the communication and feedback to become
erratic temporarily. If this happens, press CONFIRM and PowerTouch will
resume normal operation (you might need to reenter the interrupted com-
mand).
How Do I Move Around?
1. Press any button or touch the screen to activate PowerTouch’s display.
2. Use the stylus to touch the menu or control button you want to use.
Operations using the joystick
The joystick makes the following operations possible.
1. Customization of the PowerTouch screen: The buttons on the screen
of PowerTouch can be moved or resized. (Refer to "To Customize the
PowerTouch Screen" on page 43 of the Connection and Setup Guide.
2. Contrast adjustment of the PowerTouch screen: For details, see "To
adjust the contrast" on page 74.
Also use the joystick when using the OSD (On-Screen Display) of the
DVD or LD player. (Certain functions may be restricted with some de-
vices.)
•
•
Display a menu containing the OSD function.
Press the OSD button or Menu. The menu is displayed on the TV
monitor screen.
•
•
Select an item by tilting the joystick up/down or to the left/right.
Press the joystick’s ENTER button to enter the selected item.
(With certain models, the selected item may also be established with
the other buttons.)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Use PowerTouch?
How Do I Enter Text?
Many of the control menus allow you to assign your own names to list
items (such as radio stations, CD titles, etc.).
To enter text for names:
1. Access the control screen with the item name you want to change.
You have accessed the appropriate screen if
appears on the screen.
,
,
or
2. Touch
,
,
or
:
•
•
Use the stylus to select characters from the keyboard.
Touch to access to lowercase characters. Touch it again to
access special characters (such as @, !, &, etc.). Touch it a third
time to return to uppercase characters.
•
•
Touch
or to move back and forth between the characters.
Touch
to clear the last character you entered. Touch to de-
lete all the characters in the line.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Two: Using PowerTouch
Your new receiver comes with the easiest—and most innovative— remote
you’ve ever seen. Its palm-sized illuminated screen displays clear icons
and menus. Because PowerTouch maintains two-way communication with
your receiver, it shows the result of your action right on its screen.
PowerTouch is a universal remote that can control hundreds of devices,
and is the first of its kind to offer infra-red compatibility with X-10, Lutron
lighting, and Makita drapery control systems, making it perfect for con-
trolling even the most elaborate home theater system. (for U.K. only)
This chapter contains the following sections:
How Do I Adjust the Sound?
page 10
page 17
page 35
page 37
page 70
page 73
page 76
page 82
How Do I Adjust the Surround modes?
How Do I Operate Devices?
HOME1, HOME2 Devices
How Do I Record? (Edit Mode)
How Do I Adjust PowerTouch’s Display?
How Do I Perform Several Actions at Once?
How Do I Control Home Automation Equipment?
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
How Do I Adjust the Sound?
You can control and adjust a variety of sound settings using the receiver’s
front panel or PowerTouch.
Turning the Speakers On
To turn on the speakers A, press the DOOR OPEN/CLOSE button to
open the door and press the SPEAKERS A button inside the door.
To turn on the speakers B, press the SPEAKERS B button located in the
door of the receiver’s front panel. (Å or ı displayed)
If you select SPEAKERS B (Zone B) while listening to a surround mode
in Zone A, the sound in Zone A will automatically revert to stereo. While
SPEAKERS B is on, surround mode cannot be selected.
If you use speakers connected to amplifiers via the PRE OUT jacks, choose
SPEAKERS A.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LSS
p
P
e
a
E
k
e
A
r
i
n
d
i
c
a
t
o
r
s
(
Å,
ı)
How Do I Adjust the Sound?
Adjusting the Volume
Use one of the following methods to adjust the volume.
•
Turn the volume knob on the front panel of the receiver.
UP
•
Press
in the appropriate direction on PowerTouch.
DOWN
Adjusting the Loudness (Only in STEREO mode with THX mode Off)
The Loudness control increases the bass and treble at low volume control
settings. This adjusts to the way the human ear hears sound at quiet vol-
umes, retaining music’s fullness and sparkle.
1. Touch
menu.
(sound) on the Quick Access menu to open the Sound
If the opened menu is not the Sound menu, touch
.
2. Touch
3. Touch
to turn the loudness setting on or off.
to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.
Operation on the receiver:
1. Press the SOUND button inside the door repeatedly until LOUD-
NESS OFF or ON is displayed.
2. Press the MULTI CONTROL (%/fi) button to select LOUDNESS ON
(or OFF), then press the SOUND button repeatedly until “SOUND
FIXED” is displayed.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
Adjusting the Tone (Only in STEREO mode with THX mode Off)
Use the Sound menu to adjust the bass or treble tone of your front left
and right speakers manually. In addition to setting bass and treble tone
adjustment values, you can completely bypass the tone control circuitry
for a purer sound.
1. Touch
menu:
(sound) on the Quick Access menu to open the Sound
2. Touch
to open the Tone menu:
3. Touch
to turn the tone settings on or off.
4. If you selected “on” in the above, touch the left
or right
arrow next to a tone setting (Treble or Bass) to adjust it. A readout
between the arrows shows the current setting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
5. Touch
to return to the previous menu or touch any Quick Access
menu button to access that menu.
Operation on the receiver:
1. Press the SOUND button in the door repeatedly until TONE OFF or
ON is displayed.
2. Press the MULTI CONTROL (%/fi) button to display TONE ON (or
OFF if desired so).
3. When ON is selected above and the SOUND button is pressed again,
the BASS setting menu appears.
When OFF is selected above, the LOUDNESS setting menu appears.
4. Adjust BASS level using the MULTI CONTROL (%/fi) button.
5. Press the SOUND button.
6. When the TREBLE setting menu appears, adjust the treble in the same
way as above. To exit from setting, press the SOUND button repeatedly
until “SOUND FIXED” is displayed.
Adjusting Speaker Levels
You can use the Sound menu to temporarily adjust the speaker levels of
your center speaker, surround speakers, surround back speakers and
subwoofer. For example, if a particular movie has dialog that’s hard to
understand, you can temporarily increase the center channel volume just
for that movie. For more information on adjusting speaker levels per-
manently, see Chapter Two: Setting Up PowerTouch in the Connections
and Setup Guide.
1. Touch
menu:
(sound) on the Quick Access menu to open the Sound
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
2. Touch
to open the Speaker Level menu:
Although icons for the front speakers appear here, notice that they do
not have buttons. They’re here for a visual reference; you cannot change
their level.
3. Select a speaker by touching its button. You have selected a speaker
when its button darkens.
The two surround speakers (SL and SR) or the two surround
back speakers (SBL and SBR)cannot be adjusted independently
between each other.
4. Touch the up
speaker(s) you chose.
5. Touch to return to the previous menu or touch any Quick Access
menu button to access that menu.
or down arrow
to adjust the volume of the
The subwoofer level can be adjusted between +10 dB and -20 dB, and
other speaker level can be adjusted between +10 dB and -10 dB.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
Operation on the receiver:
1. Press the SOUND button inside the door repeatedly until the name
of the speaker(s) to be adjusted is displayed.
C : center speaker
S : surround speakers
SB : surround back speakers
SW : subwoofer
2. Press the MULTI CONTROL (%/fi) button to select the desired
volume level, then press the SOUND button repeatedly until “SOUND
FIXED” is displayed.
These settings automatically return to the level you adjust on Chapter
Two of Connection and Setup Guide whenever you select a different source
device or turn the receiver’s power off.
Muting Sound
Use following method to temporarily mute the sound:
•
Press MUTE button on PowerTouch.
A “Mute On” message appears on the LCD screen for 3 seconds, then
disappears. The MUTE indicator on the receiver panel blinks during
muting.
Use one of the following methods to cancel muting:
•
•
Press either Mute button again.
Adjust the volume control on either the receiver or PowerTouch.
The MUTE indicator on the receiver panel goes off.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Sound?
Midnight Theater Function (Dolby Digital, DTS and DTS-ES only)
Any time you don’t want to experience the loud and soft volume extremes
of recorded sound (for example, late at night), use midnight Theater func-
tion to reduce volume extremes. This feature keeps loud, dramatic sound
from being too loud (perhaps disturbing family members or neighbors)
while ensuring that you can still hear whispered dialog or other soft sounds.
Midnight theater function only works if you are listening to a Dolby Digi-
tal, DTS or DTS-ES program that has been encoded with special compres-
sion data.
To balance volume extremes
1. Touch
(sound) on the Quick Access menu to open the Sound menu:
If the opened menu is not the Sound menu, touch
.
2. Touch
• OFF for normal balancing
• 1 for quieter balancing
until the balancing sounds right to you:
• 2 for quietest balancing (the least difference between the loudest
and quietest sound)
3. Touch
to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.
Operation on the receiver:
1. Press the SOUND button in the panel door repeatedly until MID-
NIGHT OFF, 1 or 2 is displayed.
2. Press the MULTI CONTROL (%/fi) button to select 1, 2 or OFF, then
press the SOUND button repeatedly until returning to the previous
menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
How Do I Adjust the Surround modes?
You can experience true home-theater sound with your Kenwood Audio-
Video Receiver. This receiver incorporates several listen modes to let you
enjoy surround sound with a wide variety of program sources. Each pro-
duces multiple channels of surround-sound, but each does it differently.
What are THX?
•
THX: Movie soundtracks are mixed in special movie theaters called
dubbing stages and are designed to be played back in movie theaters
with similar equipment and conditions. The soundtrack created for
movie theaters is then transferred directly onto Laserdisc, VHS tape,
DVD, etc., and is not changed for playback in a small home theater
environment.
THX engineers developed patented technologies to accurately trans-
late the sound from the movie theater environment into the home,
correcting the tonal and spatial errors that occur. On the VR-5900,
when the THX mode is on, the THX technologies are automatically
added after the decoded signal.
Movies which have been encoded in Dolby Digital, DTS, MPEG, Dolby
Pro Logic, Stereo and Mono can all benefit from activating the THX
technologies. THX should be activated only when watching movies
which were mixed for playback in large movie theater environments.
THX need not be activated for music, movies that were made espe-
cially for television or shows such as sports programming, talk shows,
etc. This is because they were mixed in a small room environment.
•
THX Surround EX: Lucas Film and Dolby Laboratories jointly devel-
oped the Dolby Digital Surround EX system, which is a cinema sur-
round sound system featuring improved special representation and
acoustic imaging of surround channels.
To allow the home theater environment to reproduce this surround
sound by translating the above technology, the VR-5900 incorporates
a THX Surround EX decoder.
This circuit features merges the matrix decoding technology with the
Lucas Film's proprietary THX processor technology and adds the sur-
round back (SB) channels to offer clearer acoustic positioning on the
rear, spatial expression and the feeling of movement between the front
and rear.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
The surround back (SB) signals are encoded in the surround channels
(SL, SR) and decoded to the SL, SR and SB channels during playback.
The THX processor then corrects these signals to match the home the-
ater reproduction and outputs them in the 6.1-channel signals.
What are Listen Modes?
•
Dolby Digital: Dolby Digital uses an encode/decode process based
on its theatrical digital surround sound technology. The five main
channels are full-frequency and independent, so sound can completely
envelop you or soar anywhere in the room, just like at the movies.
Compared with Dolby Pro Logic, Dolby Digital has more clarity,
greater surround envelopment, and more realistic sound movement
between channels.
Although a full set of speakers (front left and right, center, surround
left and right, and a subwoofer) is required for true Dolby Digital
surround sound, this receiver lets you enjoy Dolby Digital program
sources, even if you connect fewer speakers.
•
DTS : DTS has five full-frequency channels that create effects nearly
identical to those in a theater. Sounds seem to zoom from one place
to another or entirely surround you. Like Dolby Digital, DTS has much-
improved clarity, surround and sound movement capability compared
with Dolby Pro Logic. This listen mode is available on CD, LD, and
DVD media. DTS is a strictly digital format that can be supplied only
by a CD, LD, or DVD player that supports DTS sound. If you attempt
to listen to DTS encoded media through the analog connections to
your new receiver, you will experience digital noise (loud static).
•
DTS-ES Discrete 6.1, DTS-EX Matrix 6.1: Both DTS-ES Discrete 6.1
and DTS-ES Matrix 6.1 add the surround back channel audio to the
DTS 5.1-channel format to improve the acoustic positioning and
makes acoustic image movement more natural with the 6.1-channel
reproduction. This receiver incorporates a DTS-ES decoder, which can
handle DTS-ES Discrete-encoded and DTS-ES Matrix-encoded program
sources from DVD, etc.
DTS-ES Discrete 6.1 features digital discrete recording of all channels
including the surround back channels and higher quality of audio
reproduction.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
DTS-ES Matrix 6.1 features matrix encoding of surround back (SB)
signals in the SL/SR signals and decoding of the matrix into the SL,
SR and SB signals during playback.
•
•
MPEG: MPEG, which stands for “Moving Pictures Experts Group”, is
an international standard of digital video and audio compression and
decompression in media. It is the most efficient encoding method
for compressed multi-channel audio which provides the highest sound
quality to deliver the best movie theater sound into the home.
Dolby Pro Logic/Dolby Pro Logic II: Dolby Pro Logic reproduces a
surround sound like in a movie theater from Dolby Surround-encoded
program source (videotape or LaserDisc software carrying the Dolby
Surround logo), and features excellent sound movement on the front
and a surrounding atmosphere of movie theaters. Meanwhile, Dolby
Pro Logic II decodes a signal encoded in 2 channels into 4-channel
signals composed of the left/right front signals, center signal and
surround signal.
Dolby Pro Logic II is an advanced version of the decoding technology
used with Dolby Pro Logic. It inputs 2-channel signals from a Dolby
Surround-encoded source and reproduces 5.1-channel signals in
which the surround channel is divided into independent channels
for the left and right. Dolby Pro Logic II has the MOVIE mode and
MUSIC mode, and the MUSIC mode enables independent adjustment
of three parameters including Panorama mode, Dimension and Center
Width. See page 29 for the Dolby Pro Logic II parameters.
To allow the users enjoy multichannel playback also from the analog
audio of currently available Dolby Surround home video software,
the VR-5900 incorporates a Dolby Pro Logic II surround decoder.
•
DTS NEO:6: This is a new technology which decodes 2-channel sig-
nals into 6-channel signals using high-accuracy digital matrix tech-
nology. The DTS NEO:6 decoder has near-discrete properties in the
frequency characteristics of the channels as well as in channel separa-
tion. According to the signals to be played back, DTS NEO:6 uses
either the NEO:CINEMA mode optimized for movie playback or the
NEO:MUSIC mode optimized for music playback.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
•
DSP (Digital Signal Processing): DSP allows you to create your
own custom surround sound environments and use them with any
source (except Dolby Digital, MPEG, DTS and DTS-ES). You can se-
lect the ambience of an Arena, Jazz Club, Stadium, Cathedral or The-
ater, and then modify the parameters to ‘fine-tune’ the environment
to your taste. (See “Applying Digital Signal Processor (DSP) Effects”
on page 30 for details about making DSP adjustments.)
•
•
Multi ch Music (Multichannel music): All speakers are used to real-
ize a stereo sound with a wide listening range.
Stereo: Stereo listen mode provides standard stereo sound to the front
left and right speakers.
You cannot select the Input Analog mode if you are playing DTS-encoded
media.
You cannot listen to DTS-encoded media in Zone B.
When playing DTS-encoded media, wait until “DTS” appears on the
receiver display before proceeding.
The listen mode is fixed to Stereo during playback of 96k fs signals.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
To check the Surround Play status
1. Touch
(listen mode) on the Quick Access menu to open the Lis-
ten Mode menu:
2. Touch
. This displays the Input Signal Status screen, which shows
the signal being displayed:
During playback of Dolby Digital, MPEG or DTS signal, the surround
identification signal in the input is identified and displayed by means
of the L, C, R, SR, SB, SL and LFE icons.
L : Left front channel
R : Right channel
C : Center channel
SR : Surround right channel
SB : Surround back channel
SL : Surround left channel
LFE : Low frequency effect channel
S : Surround channel
3. Touch to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
Input Modes
The input mode should usually be set to Full Auto. However, the input
mode can also be set manually when you want to fix the inputs as analog
signals, etc.
Full Auto
: The receiver detects the input signal format and
selects the Listen mode automatically according to
the speaker setup.
Digital Manual
: The inputs are fixed at digital signals and the listen
modes should be switched manually by the user.
The Digital Manual mode is switched automati-
cally to the Full Auto mode when an input is
switched or the receiver is set to OFF.
Analog
: The inputs are fixed at the analog 2-channel inputs.
6ch Input
: The inputs are fixed at the analog 6-channel inputs.
This mode can be selected only when the DVD in-
put is selected with the input selector.
•
When you use Full Auto mode with certain DVD and LD players,
performing operations such as “Skip” or “Stop” may momentarily
interrupt the output. This could switch the “Listen Mode” automati-
cally to the surround mode intended for the input signal if you have
manually selected a different listen mode.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
To Set the Input Mode manually
1. Touch
(listen mode) on the Quick Access menu to open the Lis-
ten Mode menu:
2. Select an Input Mode you want.
To fully enjoy the sonic benefits of specially-encoded DVD AUDIO discs
played on a compatible DVD player, you must set the receiver’s input to
6ch Input. To do so, select
.
When you are finished listening to analog media, set the receiver’s input
back to digital. To do so, select the
.
Operation on the receiver:
Press the INPUT MODE button in the door repeatedly until FULL
AUTO, DIGITAL-MANUAL, ANALOG or 6CH INPUT is displayed.
See Chapter Three: Using PowerTouch in Multiple Zones for more infor-
mation about the analog inputs.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
To Set the THX mode
1. Touch
(Listen Mode) on the Quick Access menu to open the Lis-
ten Mode menu.
2. Touch
until the THX mode to be set is displayed.
The THX mode is displayed in a frame at the top right of the screen.
When the surround back speakers
When the surround back speakers
are set to Lrg, Nml/THX or Yes:
are set to Off or No:
1 THX Sur EX On
2 THX Sur EX Auto
3 THX On
1 THX On
2 THX Off
4 THX Off
Operation on the receiver:
Press the THX button inside the door repeatedly until the THX
mode to be set is displayed.
When the surround back speakers
When the surround back speakers
are set to Lrg, Nml/THX or Yes:
are set to Off or No:
1 THX Sur EX On
2 THX Sur EX Auto
3 THX On
1 THX On
2 THX Off
4 THX Off
After 3 seconds, the display of the set THX mode returns to the
previous display.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
÷ THX Sur EX ON
The input signal is decoded automatically into 6.1-channel signals
if the input signal is Dolby Digital or DTS and contains two differ-
ent types of surround channel signals.
The THX function is activated.
÷ THX Sur EX AUTO
The input signal is decoded into 6.1-channel signals only when the
input contains the Dolby Digital Surround EX encoded identifica-
tion signal.
The THX function is activated
÷ THX ON
The THX operation is activated. (6.1channel decoding will not be
applied.)
÷ THX OFF
The THX Surround EX and THX operations are deactivated.
÷ When playing Dolby Digital Surround EX-encoded software in 6.1 chan-
nels, it is required to set the THX Surround EX mode to On or Auto.
Note that some of Dolby Digital Surround EX-encoded software does
not contain the identification signal. In this case, set the THX Sur EX
mode to On.
÷ Set the THX mode to Off when DTS-ES decoding is required.
÷ The THX operation is not activated with the 96 k fs PCM signal.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
To Set the Listen Mode manually
1. Touch
(Listen Mode) on the Quick Access menu to open the Listen
Mode menu:
2. Select a Listen Mode you want.
Operation on the receiver:
Press the LISTEN MODE button inside the door repeatedly until the
listen mode to be set is displayed.
After 5 seconds, the display of the set listen mode returns to the previous
display.
•
•
The available listen modes may be restricted depending on the input
signal and speaker setup.
In FULL AUTO mode, if the incoming signal is not Dolby Digital,
DTS, DTS-ES or MPEG, the listen mode reverts to the last listen mode
you selected for that input.
•
When the speakers A are set to Off or speakers B are set to On, the
listen mode is switched to STEREO.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
Selectable Listen modes
The selected listen mode is variable depending on the input signal.
Input signal
Selectable Listen modes
Dolby Digital
• Dolby Digital*
• Pro Logic (ProLogic II MUSIC/MOVIE)**
• Stereo
* When the input signal contains the
identification signal indicating Dolby
Surround encoding, The listen mode is
switched automatically to Pro Logic (Pro Logic
II MUSIC/MOVIE).
** Pro Logic (Pro Logic II MUSIC/MOVIE)
can be selected only when the input is 2-
channel signals.
DTS
• DTS
• STEREO
DTS-ES Matrix 6.1
• DTS (DTS-ES Mtrx 6.1*)
• STEREO
*DTS-ES Matrix 6.1 can be selected only
when THX mode is OFF.
DTS-ES Discrete 6.1 • DTS (DTS-ES Dscrt 6.1*)
• STEREO
*DTS-ES Discrete 6.1 can be selected only
when THX mode is OFF.
MPEG
• MPEG*
• Stereo
*When the input signal contains the
identification signal indicating Dolby
Surround encoding, The listen mode is
switched automatically to Pro Logic.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
Input signal
Selectable Listen modes
PCM or Analog
• Stereo*
• DSP**
• Pro Logic (ProLogic II MUSIC/MOVIE)
• NEO : Cinema
• NEO : Music
• Multi ch Music
* When the input is a 96 kfs PCM signal, it is
only Stereo that can be selected.
** DSP Modes can be selected only when
THX mode is OFF.
Some modes may be unable to be selected depending on the speaker
setup.
Selecting the Pro Logic mode with PowerTouch
1. In the Listen Mode menu, select Pro Logic to display the following
menu:
2. Select one of Dolby PL II: Movie (Dolby Pro Logic II: Movie), Dolby
PL II: Music (Dolby Pro Logic II: Music) and Dolby Pro Logic.
The selected item will be displayed in highlighted.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
3. When you select Dolby PL II: Music, you can change the settings of
Panorama mode, Dimension and Center Width.
1) Panorama mode setting: Touch the
button to switch the
parameter on and off alternately.
2) Dimension setting: Touch the
button on the left of
to switch the setting to R-1, R-2 and R-3. Touch the
button on the right of
to switch it to F-1, F-2 and
F-3.
3) Center Width setting: Touch the
button on the left of
to decrease the expansion to the left and right. Touch
button on the right of to increase it.
the
Description of Dolby Pro Logic II: Music mode
Panorama mode : Expands the image of front-channel stereo to the
surround speakers to create a sound environment that
fills your surroundings.
Dimension
: This controls the balance between the Front and Rear
in 3 steps on the front and 3 steps on the rear. Set this
parameter to one of the Front steps if the surround
effect is too strong, or to one of the Back steps if it is
too weak.
Center Width
: The center channel signal can be divided and distrib-
uted to the Front L/R channels.
The adjustment for distributing the center channel
signal to the front channels can be applied in eight
steps from 0 to 7.
Use this adjustment when the center image seems to
be too strong.
The Center Width parameter has no effect when Cen-
ter speaker is set to Off or No.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
Applying Digital Signal Processor (DSP) Effects
The DSP mode creates the reverberation devices (elements of sound ech-
oed in various spaces) which determine the feeling of presence. Since
DSP uses digital processing, it can produce these effects without spoiling
the sound quality of the original music or video source.
The DSP mode lets you add the atmosphere of an Arena, Jazz club, Ca-
thedral, Concert hall, Stadium, or Theater from PCM or analog input
source. These modes are particularly effective when used with stereo pro-
gram sources like CD, television, and FM radio. You might enjoy trying
the Stadium (1, 2), Arena or Concert hall mode the next time you watch
a sporting event or concert.
You can adjust the following elements to create a customized environment:
•
•
•
The WALL TYPE parameter lets you adjust the brightness of the sonic
environment according to your preference.
The ROOM SIZE parameter lets you adjust the size of the sonic envi-
ronment according to your preference.
The EFFECT level lets you adjust the amount of DSP “presence” in
the sonic environment according to your preference.
The DSP effect cannot be applied when the input is a 96 k fs PCM signal.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
To set a DSP effect:
1. Touch
(listen mode) on the Quick Access menu to open the Lis-
ten Mode menu:
2. Touch
.
3. Touch a desired DSP mode icon button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
4. (Optional) Touch
level to your taste.
to adjust the wall type, room size, and effect
•
•
•
Wall Type changes the quality of the simulated walls.
Room Size switches the simulated room size.
Effect Level adjusts the amount of DSP presence in the overall
sound. Lower numbers decrease the amount of presence, higher
numbers increase it.
5. Touch
to return to the previous menu or touch one of the Quick
Access menu buttons to proceed to the next operation.
Operation on the receiver:
•
Press the LISTEN MODE button inside the door repeatedly until the
listen mode to be set is displayed. The DSP can be set to ARENA,
JAZZ CLUB, CATHEDRAL, CONCERT HALL, STADIUM 1, STADIUM
2, THEATER 1 or THEATER 2.
Fine adjusting the DSP effects on the receiver:
1. Press the SOUND button inside the door to select WALL MEDIUM
(HARD or SOFT).
2. Press the MULTI CONTROL (fi/%) button to select the desired type.
3. Select the types of Room size and Effect level in the same way as
above.
4. Press the SOUND button repeatedly until “SOUND FIXED” is dis-
played.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the Surround?
HDCD® and D.R.I.V.E. Effects
HDCD is a new format enabling recording with higher quality than pre-
vious CD while maintaining compatibility with it. Although an HDCD-
compatible CD player is usually required to exhibit the full characteris-
tics of the HDCD, this receiver is capable of reproducing high-quality
HDCD signals by connecting a CD player through digital connection,
even when it does not incorporate the HDCD circuitry.
D.R.I.V.E. is a KENWOOD original technology for reproducing signals
with high resolution by instant switching of the internal filters according
to the input signal. This receiver incorporate a high performance DSP to
provide very high resolution from 32-bit DRIVE III circuitry, achieving
stereo audio reproduction with the best quality ever reached.
The D.R.I.V.E. indicator lights when the D.R.I.V.E. circuit is activated.
The HDCD indicator lights when the HDCD circuit is activated and an
HDCD is played.
HDCD and D.R.I.V.E. are designed to be activated automatically to select
the optimum circuit path.
HDCD and D.R.I.V.E. is effective only at the time of digital input stereo,
DSP mode or multi channel audio.
Some HDCD-recorded discs do not contain all tracks as HDCD recordings.
(The HDCD indicator will not light for tracks not recorded as HDCD.)
HDCD and D.R.I.V.E. is effective only at the time of THX Off mode.
, HDCD®, High Definition Compatible Digital® and Pacific
MicrosonicsTM are either registered trademarks or trademarks of Pacific
Microsonics, Inc. in the United States and/or other countries. HDCD sys-
tem manufactured under license from Pacific Microsonics, Inc. This prod-
uct is covered by one or more of the following: IN the USA: 5,479,168,
5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311,
5,872,531, and in Australia: 669114. Other patents pending.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust the
Headphone Operat
Insert the headphone into the receiver’s PHONES jack and adjust
the listening level.
VOLUME CONTROL
34
Download from Www.Somanuals.com. All Manuals Search And Download.
S
P
E
A
K
E
R
S
A
W
h
e
n
How Do I Operate Devices?
How Do I Operate Devices?
Your PowerTouch makes it easy for you to control the different devices
connected to your receiver. Its easy-to-use LCD screen provides a choice
of command buttons similar to those found on the devices’ own remotes.
Use these buttons to control your home entertainment equipment by
following these easy steps:
1. Choose the menu containing the device you want to use (HOME1 or
HOME2).
2. Touch the icon button for the device you want to operate from
Example of display when
PowerTouch’s control screen.
CD is selected
When the TV source is set for TV1, The Power
control icons for TV1 will be displayed in the
same position of all of the Device control
screens, allowing you to switch the TV On and
Off.
3. Touch a button on the device’s control screen.
The rest of this manual assumes that you have connected your home en-
tertainment devices and identified those devices to PowerTouch. If you
have not done so, follow the instructions under “Identifying De-
vices For PowerTouch Control” on page 40 of the Connections and
Setup Guide before reading any further in this manual. If you do not,
you will not see controls for any device except for the factory-defined
devices, such as the tuner and the home automation devices.
As you use PowerTouch, remember that this manual only gives instruc-
tions for operating PowerTouch with a particular device. It is not intended
to explain how your devices work—for that information see the manuals
that came with your devices.
Although the receiver has been designed to function in combination with
multiple devices, all or some of the operations may not be available with
certain types of devices.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Controlling a device without altering the receiver's input selection
(Operations using the SHIFT button):
The transmission of operation signals from PowerTouch to the receiver
can be disabled with the HOME1 or HOME2 menu. This makes it pos-
sible, for example, to turn the VCR ON while listening to a CD.
Procedure:
1. Touch
(HOME1) or
(HOME2) in the Quick Access menu to
display the HOME1 or HOME2 menu.
2. Touch
button.
3. Touch the desired operation button within 3 seconds after above.
By touching the SHIFT button and executing an operation, any device
can be controlled without sending the command signal to the receiver.
The above operation is not available with devices connected using
the KENWOOD system control cable.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
HOME1, HOME2 Devices
Use this menu to operate devices, such as CD players, the tuner, etc.
By using the customization function, you can place buttons in the Home
1 screen on then Home 2 screen and vice versa. (Refer to "To Customize
the PowerTouch Screen" on page 45 of the Connection and Setup Guide.)
This menu controls the following (note which device you have connected
to the jack in the space provided):
I should use
this icon...
to control this device...
(use this space to note your devices)
Icons assigned to the Home 1 screen by default.
The operation of the CD2/TAPE2 icon is different from other icons. See
page 39 for details.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
I should use
this icon...
to control this device...
(use this space to note your devices)
Icons assigned to the Home 2 screen by default.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Playback of the device connected to the CD2/TAPE2 MONITOR
These instructions are for operating a second CD player or tape deck
from a single-Zone installation or from Zone A. For more information
on operating devices in a multi-Zone setup, see “Chapter Three: Using
PowerTouch in Multiple Zones”.
To operate a second CD player or tape deck:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
(CD2/TAPE2 ON/OFF). The CD2/TAPE2 MONITOR
indicator on the receiver also lights up. In this condition, the device
connected to the CD2/TAPE2 inputs can be monitored.
Each touch of
toggles its condition between ON and OFF.
After completing playback of the device connected to the CD2/TAPE2
MONITOR, be sure to set this condition to OFF.
3. Touch
to this jack set and identified to PowerTouch.
4. Use the available commands as your CD player or tape deck remote.
Touch (more) to access any customized commands you have
. The commands appear for the device you connected
taught PowerTouch for this device. Touch the command to use it.
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide.
To select the input on the receiver, use the CD2/TAPE2 MONITOR
button inside the door. The CD2/TAPE2 MONITOR indicator lights
up when it is selected. After completion of playback, press the CD2/
TAPE2 MONITOR button again so that the CD2/TAPE2 MONITOR
indicator goes out.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
CD player
The displayed screen is variable depending on the loaded CD.
• For the operation of the Kenwood System Connected 200-Disc CD
Changer, see this page.
• For the operation of the KENWOOD 200-Disc CD Canger (without
system connection), see page 46.
• For the operation of the SingleCD or Carrousel CD Player, see page 51.
Kenwood System Connected 200-Disc CD Changer
Kenwood 200-Disc CD Changers have many different features that make
them ideal complements to your Kenwood receiver. Some changer mod-
els can store disc and track titles for all loaded discs, and then download
this information to your receiver for display on PowerTouch’s screen.
Others can play 2 different CDs in 2 different rooms at the same time
with the KRF-X9995D. You can easily activate all these features using just
a few of PowerTouch’s buttons.
To play KENWOOD System Connected 200-Disc CD Canger using
PowerTouch
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
. This accesses the CD controls:
40
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
3. Use this screen as your CD remote.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page 43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
For more information on operating a CD player from another Zone, see
“Chapter Three: Using PowerTouch in Multiple Zones”.
Displaying Disc and Track Titles
Kenwood 200-Disc CD Changers allow you to easily search for and select
a particular CD or song by title from any disc you’ve loaded into the unit.
PowerTouch can display these disc and track titles on its LCD display,
allowing you to choose discs and songs by title in a few simple steps.
You have to assign disc and track titles to the discs in your CD player
before you can transfer them to PowerTouch. See your CD player’s in-
struction manual for more information about assigning disc and track
titles.
To read the loaded disc titles and store them in PowerTouch:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
(CD1).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
3. Touch
. This accesses the disc mode commands:
4. If you haven’t already done so on the CD changer, touch
.
This reads all of the disc and track title information into the CD
changer’s memory.
5. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Select
PowerTouch while it is reading data.
. Do not move
This process may take some time, depending on how many CDs you
have loaded. When the IR light on the receiver goes out, the receiver
is done sending the information to PowerTouch, and you may move
PowerTouch again. PowerTouch’s memory now contains the disc titles
of every CD in the changer with title information.
6. Touch
to return to the CD controls.
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to read disc
data.
2. Touch
(HOME1) on Quick Access menu.
3. Touch
4. Touch
.
. This accesses the disc mode commands
42
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
5. If you haven’t already done so on the CD changer, touch
.
This reads all of the disc and track title information into the CD
changer’s memory. Touch to return to the CD controls.
6. Select the disc you want to play and touch
controls.
to open the track
7. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Touch
PowerTouch while it is reading data.
. Do not move
This process may take some time, depending on how many CDs you
have loaded. You will see the track titles on the PowerTouch when it
is finished reading data.
8. Touch
to return to the CD controls.
Entering Disc and Track Titles
You can also use PowerTouch to enter disc or track titles, if they are not
already stored on the changer. The titles you add are stored in memory
on both PowerTouch and the changer.
To enter disc or track titles:
1. Touch
2. Touch
(HOME1) on the Quick Access menu.
.
3. Stop playing a CD. (if it is playing)
4. Touch
mands.
or
. This accesses the appropriate control com-
If you pressed
rently selected disc.
, you will be entering track titles for the cur-
43
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
5. Touch the disc or track name you want to change. See “How Do I
Enter Text” on page 8 for more information on changing names.
6. Press
7. Repeat steps 5 and 6 for each title you want to store.
8. Touch to return to the disc or track controls. Touch it again to
return to the CD controls.
.
If you rearrange or add new CDs to the changer, you will need to repeat
both the disc and track read process. Otherwise, disc information is stored
in PowerTouch permanently.
The track title information is not stored permanently in PowerTouch. Each
time you select a CD to play you have to download its track title informa-
tion.
Title reading by PowerTouch is not possible for the following models.
Model: CD-2280M and CD-2260M.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To play discs and tracks by title:
1. Touch
2. Touch
3. Touch
(HOME1) on the Quick Access menu.
button.
. This accesses the disc commands:
4. Titles of all discs in the changer are displayed in numerical order.
5. Use the up or down arrow to scroll through the discs numeri-
cally, then touch the disc title you want to play.
6. If you want to play the disc from the beginning, touch
.
7. (Optional) Touch
numerical order.
. The track titles for that disc are displayed in
8. If you want to play the disc starting from a particular track, use the up
or down arrow to scroll through the track titles, then touch
the track title.
9. When you’ve highlighted the track you want to begin playing, touch
.
10. Touch
to return to the CD controls.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To play KENWOOD 200-Disc CD Changer (without system connec-
tion) using PowerTouch
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
button . This accesses the CD controls:
3. Use this screen as your CD remote.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it.
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
For more information on operating a CD player from another Zone, see
“Chapter Three: Using PowerTouch in Multiple Zones”.
Displaying Disc and Track Titles
Kenwood 200-Disc CD Changers allow you to easily search for and select
a particular CD or song by title from any disc you’ve loaded into the unit.
PowerTouch can display these disc and track titles on its LCD display,
allowing you to choose discs and songs by title in a few simple steps.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
You have to assign disc and track titles to the discs in your CD player
before you can transfer them to PowerTouch. See your CD player’s in-
struction manual for more information about assigning disc and track
titles.
To read the loaded disc titles and store them in PowerTouch:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
3. Touch
(CD1).
. This accesses the disc mode commands:
4. If you haven’t already done so on the CD changer, touch
.
This reads all of the disc and track title information into the CD
changer’s memory.
5. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Select
PowerTouch while it is reading data.
. Do not move
This process may take some time, depending on how many CDs you
have loaded. When the IR light on the receiver goes out, the receiver
is done sending the information to PowerTouch, and you may move
PowerTouch again. PowerTouch’s memory now contains the disc titles
of every CD in the changer with title information.
6. Touch
to return to the CD controls.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To read the loaded track titles and store them in PowerTouch:
1. Make sure you have followed the previous instructions to read disc
data.
2. Touch
(HOME1) on Quick Access menu.
3. Touch
4. Touch
.
. This accesses the disc mode commands.
5. If you haven’t already done so on the CD changer, touch
This reads all of the disc and track title information into the CD
changer’s memory. Touch to return to the CD controls.
.
6. Select the disc you want to play and touch
controls.
to open the track
7. Set PowerTouch down so that its IR transmitter window is aiming at
the receiver’s IR transmitter window. Touch
PowerTouch while it is reading data.
. Do not move
This process may take some time, depending on how many CDs you
have loaded. You will see the track titles on the PowerTouch when it
is finished reading data.
8. Touch
to return to the CD controls.
Entering Disc and Track Titles
You can also use PowerTouch to enter disc or track titles, if they are not
already stored on the changer. The titles you add are stored in memory
on both PowerTouch and the changer.
To enter disc or track titles:
1. Touch
2. Touch
(HOME1) on the Quick Access menu.
.
3. Stop playing a CD. (if it is playing)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
4. Touch
mands.
or
. This accesses the appropriate control com-
, you will be entering track titles for the cur-
If you pressed
rently selected disc.
5. Touch the disc or track name you want to change. See “How Do I
Enter Text” on page 8 for more information on changing names.
6. Press
7. Repeat steps 5 and 6 for each title you want to store.
8. Touch to return to the disc or track controls. Touch it again to
return to the CD controls.
.
If you rearrange or add new CDs to the changer, you will need to repeat
both the disc and track read process. Otherwise, disc information is stored
in PowerTouch permanently.
The track title information is not stored permanently in PowerTouch. Each
time you select a CD to play you have to download its track title informa-
tion.
Title reading by PowerTouch is not possible for the following models.
Model: CD-2280M and CD-2260M.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To play discs and tracks by title:
1. Touch
2. Touch
3. Touch
(HOME1) on the Quick Access menu.
.
. This accesses the disc commands:
4. Titles of all discs in the changer are displayed in numerical order.
5. Use the up or down arrow to scroll through the discs numeri-
cally, then touch the disc title you want to play.
6. If you want to play the disc from the beginning, touch
.
7. (Optional) Touch
numerical order.
. The track titles for that disc are displayed in
8. If you want to play the disc starting from a particular track, use the up
or down arrow to scroll through the track titles, then touch
the track title.
9. When you’ve highlighted the track you want to begin playing, touch
.
10. Touch
to return to the CD controls.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
SingleCD or Carrousel CD Player
To operate SingleCD or Carrousel CD Player:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
. This accesses the CD controls:
An example of Single CD
(Kenwood system connection)
An example of Single CD
(without system connection)
An example of Carrousel CD
(Kenwood system connection)
An example of Carrousel CD
(without system connection)
3. Use this screen as your CD player remote. The available buttons may
vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
CD-R Recorder
To operate CD-R Recorder:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
.
This accesses the CD-R Recorder controls:
3. Use this screen as your CD-R Recorder player remote. The available
buttons may vary depending on the setup code you assigned to this
icon.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
MD Recorder
To operate MD Recorder:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
. This accesses the MD recorder controls:
3. Use this screen as your MD recorder remote. The available buttons
may vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Entering Disc and Track Titles:
If you have Kenwood MD-2070, you can also use PowerTouch to enter
disc or track titles.
To enter disc or track titles:
1. Touch
2. Touch
(HOME1) on the main or Quick Access menu.
.
3. Stop playing an MD. (if it is playing)
4. Touch
5. See “How Do I Enter Text ?” on page 8 and enter a title.
6. Touch
7. While watching the MD recorder’s display, use
.
.
or
on the Mini
Disc Title menu to select where you want to enter the title to (either
disc title or track title). If you want to enter a track title, choose the
track number you want to assign a name for.
8. Press
.
9. Press
to return to MD controls.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Tape Deck
To operate Tape Deck:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
. This accesses the tape deck controls:
3. Use this screen as your tape deck remote. The available buttons may
vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
See your tape deck instruction manual for more information.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Turntable
To operate a turntable/record player:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
to set the turntable as the speaker source. You will re-
main at the HOME1 menu.
3. Play your records as normal. Please note that you cannot control the
turntable with PowerTouch; you must still operate the turntable manu-
ally.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Tuner
To tune in to a radio station:
1. Touch
(HOME1) on the Quick Access menu.
2. Touch
. This accesses the tuner commands:
3. Tune in the station.
• Touch
to change bands.
• Touch
to switch from Auto tuning to Manual tuning or
Manual tuning to Auto tuning. Select Manual if you experience
interference due to weak radio signals. (Stations are received in
mono during manual tuning.)
In Auto tuning mode, the stereo mode is activated automatically
when a stereo station is tuned in (FM band only).
• Touch the left
• Touch
or right arrow
to tune in a station.
and enter the broadcast frequency using the
10key pad. (e.g.; To select FM 87.5 MHz, enter 8, 7, 5, 0 and
)
• Select the left
or right end arrow
to cycle through
any stations stored in memory.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
• Touch
to open the stored stations list. Touch a storage
to tune that station.
button and touch
For more information on storing stations in memory, see “Storing
Radio Stations in Memory (optional)” on page 41 of the Connec-
tions and Setup Guide.
• While Zone B is selected, only
and
can be operated.
4. Touch
menu.
(HOME1) on Quick Access menu to return to the HOME1
58
How Do I Operate Devices?
RDS (Radio Data System) : RDS is a system where radio stations transmit
digital data for FM broadcasts along with the broadcast signal. Tuners
and receivers designed for RDS reception can extract the data from the
broadcast signal for use with various functions such as automatic display
of the station name.
RDS Functions help you:
•
•
•
Search for programs of a specific type using Program Type Identifica-
tion Search (PTY search).
Search for a station automatically when you select the station name.
(PS Read)
View information about a station:
• the station name
• any text data transmitted by the station
•
Automatically select stations providing RDS and FM broadcasting and
store them in the preset memory (up to 40 stations can be preset).
For more information about storing stations, see “Storing Radio Sta-
tions in Memory (optional)” on page 41 of the Connections and Setup
Guide.
Before using RDS functions, be sure to perform “Storing RDS Stations
Automatically” on page 41 of the Connections and Setup Guide.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To search for a specific type of music or radio program:
1. Touch
2. Touch
3. Touch
(HOME1) on the Quick Access menu.
.
at the top of the screen. This accesses RDS commands:
4. Touch
5. While
.
is highlighted, select the program type you want using
the following methods:
• Select the left (
) or right arrow (
) to cycle through the
program types until the type you want appears. The program types
cycle in the order shown in the table below.
6. Touch
.
• If the tuner cannot find the program type you want, “NO PRO-
GRAM” appears on the receiver display. The display returns to its
original screen after several seconds.
• If the tuner locates a station playing the program type you want,
reception begins. The display changes to show the station name.
To change to a different program type, repeat Steps 4 through 6 above.
To cancel the program search, touch
during the PTY search.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Program Type Name
Receiver Display
News
NEWS
Information
Sports
INFORM
SPORTS
TALK
Talk
Rock
ROCK
Classic Rock
Adult Hits
Soft Rock
Top 40
CLS ROCK
ADLT HIT
SOFT RCK
TOP 40
Country
COUNTRY
OLDIES
Oldies
Soft
SOFT
Nostalgia
Jazz
NOSTALGA
JAZZ
Classical
Rhythm and Blues
Soft Rhythm and Blues
Foreign Language
Religious Music
Religious Talk
Personality
Public
CLASSICL
R & B
MI
SOFT R & B
LANGUAGE
REL MUSC
REL TALK
PERSNLTY
PUBLIC
College
COLLEGE
WEATHER
Weather
61
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
TV
To operate a standard TV:
1. Touch
(HOME2) on the Quick Access menu.
2. Touch the TV icon button to which you assigned the TV. This accesses
the TV controls:
When the TV source is set for TV1, The
Power control icons for TV1 will be
displayed in the same position of all of
the Device control screens, allowing you
to switch the TV On and Off.
3. Use this screen as your TV remote. The available buttons may vary
depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To operate satellite TV:
1. Touch
(HOME2) on the Quick Access menu.
2. Press the Video icon button to which you assigned the satellite TV
receiver. This accesses the satellite controls:
3. Use one of these screens as your satellite TV remote (depending on
the service you receive). The available buttons may vary depending
on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. . For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To operate DSS or tuner:
1. Touch
(HOME2) on the Quick Access menu.
2. Press the Video icon button to which you assigned the satellite TV
receiver. This accesses the satellite controls:
3. Use one of these screens as your satellite TV remote (depending on
the service you receive). The available buttons may vary depending
on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. . For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
To operate cable TV:
1. Touch
(HOME2) on the Quick Access menu.
2. Touch the TV or input icon button to which you assigned the cable TV
tuner. This accesses the cable TV controls:
3. Use this screen as your cable TV remote. The available buttons may
vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
VCR/PVR
To operate the VCR/PVR:
1. Touch
(HOME2) on the Quick Access menu.
2. Touch the Video icon to which you assigned the VCR or PVR (per-
sonal video recorder). This accesses the VCR controls:
3. Use this screen as your VCR/PVR remote. The available buttons may
vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
DVD Player
To operate DVD Player:
1. Touch
(HOME2) on the Quick Access menu.
2. Select the icon you assigned to your DVD player. This accesses the
DVD controls:
3. Use this screen as your DVD player remote. The available buttons may
vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
If you are listening to a DVD AUDIO music disc, you will need to switch
the input from Digital Input to Analog 6ch Input. For more information
on switching input, see “To set the Input mode manually” on page 23.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Laser Disc Player
To operate a laser disc player:
1. Touch
(HOME2) on the Quick Access menu.
2. Select the icon you assigned to the laser disc player. This accesses the
laser disc controls:
3. Use this screen as your laser disc player remote. The available buttons
may vary depending on the setup code you assigned to this icon.
Touch
(more) to access any customized commands you have
taught PowerTouch for this device and to access this device’s macros.
Touch the command or macro name to use it. (See “Operation on the
More menu” on page 69 of this manual.)
For more information on teaching commands to PowerTouch, see
“To Customize the PowerTouch Screen” on page43 of the Connections
and Setup Guide. For more information on device macros, see “How
Do I Perform Several Actions at Once?” on page 76 of this manual.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
Operation on the More menu
The More menu can be opened from device control screen set for CD1,
MD/TAPE1, CD-R, VIDEO1, VIDEO2, VIDEO3, VIDEO4, DVD, TV1 or
TV2. The following figure shows an example of More menu:
The eight buttons on the middle of the screen (Empty 1 to Empty 8 by
default) are buttons with the learning capability. To use them, you should
program the desired functions in them using the customization function.
For more information on teaching commands to PowerTouch, see ““To
Customize the PowerTouch Screen” on page43 of the Connections and
Setup Guide.
The Macro function makes it possible to record a device control proce-
dure in each of the six Macro buttons (numbered 1 to 6 by default) at the
bottom of the screen.
How to use the Power ON or Power OFF button :
When you want to record a device power ON or OFF step in a macro, use
the Power ON or Power OFF button in this menu.
When the macro is executed with recording of the operation of this button,
PowerTouch checks whether power is currently On or Off and performs
the power On or Off operation accordingly.
The receiver should be ON to use the Macro function.
For more information on device macros, see “How Do I Perform Several
Actions at Once?” on page 65 of this manual.After 5 seconds, the display
of the set listen mode returns to the previous display.
The buttons which are not set by the learning or macro functions are
grayed out and cannot be selected.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Record (Edit Mode)?
How Do I Record (Edit Mode)?
PowerTouch provides a simple yet powerful editing procedure that lets
you quickly and easily specify the source and destination devices.
To record:
1. Touch
(edit) on the Quick Access menu to open the Edit menu:
2. Touch a source device. This will be the device you are recording from,
like a DVD or CD player. PowerTouch displays the destinations able
to record from that source:
70
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Record (Edit Mode)?
3. Select the recording destination device and touch
displays the control screen for the destination device.
. PowerTouch
The
(Source) and
(Destination) are displayed on the left side
of the control screen.
Each touch of the
or
switches between the source device con-
trol screen and the destination device control screen.
4. Touch the record control on the destination device, then switch to the
source device and touch the play control.
5. Touch any Quick Access button to change to that menu.
For more information on recording with any connected device, see the
device’s instruction manual.
•
•
If you’re recording from a digital source, any action other than adjust-
ing the volume may cause the sound to “clip” on the recording.
You cannot record from the component you are using to record. For
example, if you’re recording on a VCR connected to the VIDEO1 jacks,
select a source other than Video 1.
•
If your source is a camcorder or other video unit, refer to the instruc-
tion manual for the particular unit you’re recording from.
Digital to Digital Recording:
The PCM digital signal input through any DIGITAL IN jack is output digi-
tally at the digital jack. For more information on this connection, see
“Connecting Your MD Recorder or Primary Tape Deck” on page 20 of
the Connections and Setup Guide.
Dolby Digital and DTS signals cannot be recorded.
Digital to Analog Recording:
While home VCRs can record only two channels of audio, the receiver is
capable of "down-mixing" the multi-channel audio of Dolby Digital, DTS
or MPEG into stereo sound. Down-mixing is available by setting the Digital
Rec mode to “REC MODE: AUTO or “REC MODE: MANUAL”.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Record (Edit Mode)?
Digital Rec mode:
Digital signals include a variety of signals such as the Dolby Digital, DTS
and PCM signals.
When REC MODE is set to AUTO, digital input signals are automatically
converted into analog stereo signals.
When REC MODE is set to MANUAL, only a specific signal among the
digital signals can be converted into analog stereo signals.
When REC MODE is switched to MANUAL in the middle of reproduc-
tion of a digital audio program, only the digital signal of the type being
reproduced will be converted into analog stereo signals.
When REC MODE is switched to MANUAL while no source is played,
only the PCM signal will be converted into analog stereo signals.
To set the Digital Rec mode:
1. Touch the
2. Select
(Src.) or
(Det.) so that
(Src.) is reversed.
(digital rec. Manual).
(digital rec. Manual) is selected,
(digital rec. auto) or
3. When
(digital rec. auto) or
the receiver displays "REC MODE: AUTO" or "REC MODE: MANUAL".
It is not possible to recording monitor a digital source signal onto the
device connected to the CD2/TAPE2 MONITOR input.
When a source recorded by down-mixing a multi-channel source is played
back in the Dolby Pro Logic mode, the audio can be reproduced in 4-
channel surround sound.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust PowerTouch’s Display?
How Do I Adjust PowerTouch’s Display?
How Do I See PowerTouch in the Dark?
You can use your PowerTouch in the dark. When you turn on the back
light, your PowerTouch screen will light up, making navigation easier if
you need to operate PowerTouch in dim or nonexistent light.
BACKLIGHT
To use PowerTouch in the dark, press
(BACKLIGHT).
BACKLIGHT
To turn off the light and return to normal display, press
(BACK-
LIGHT) again.
Backlight is automatically turned off when PowerTouch goes to “sleep”—
you will need to turn it on again when you reactivate PowerTouch.
Keep the Back Light turned off during normal use to maximize the life of
your batteries.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust PowerTouch’s Display?
How Do I See PowerTouch’s Screen More Clearly?
You can also adjust the contrast to suit your viewing angle.
To adjust the contrast:
CONTRAST
1. Press
screen:
(CONTRAST) until “Contrast” message appears on the
2. While this message is displayed, move the joystick up or down to
increase or decrease the contrast until you are satisfied.
3. Touch
to save the contrast setting and return to the control screen.
How Do I Turn the Beeping On or Off?
PowerTouch emits beeps under various circumstances (for example, to
confirm your entry). You can turn these sounds off if you don’t want to
hear them. To turn the beeps off:
1. Touch
(setup) on the Quick Access menu.
2. Touch
once to turn off beeping. Touch it again to turn beep-
ing back on.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Adjust PowerTouch’s Display?
Using PowerTouch to Dim or Brighten the Receiver’s Front Panel
1. Touch
(Setup) on the Quick Access menu:
2. Touch
to make the receiver display illumination dim and
less noticeable. It is also possible to disable some indicators (THX,
DTS, D.R.I.V.E., DOLBY DIGITAL, MPEG, HDCD and Infrared remote
transmitter indicator) on the receiver. Each touch of the FL Dimmer
button switches the above as shown below:
1 Display/bright
2 Display/dim
3 Display/dim
Indicators/enabled
Indicators/enabled
Indicators/disabled
Changing the Front Panel Display Mode
1. Touch
(Setup) on the Quick Access menu.
2. Touch
.
A: Connected Device
DVD :
Input Mode
AUTO
B: Input Terminal
Connected Device
VIDEO4 :
DVD
C: Listen Mode
DOLBY DIGITAL
"Input Mode" is displayed only when a selector with digital input is se-
lected.
When the input selector is PHONO or TUNER, the connected device and
listen mode are displayed alternately.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Perform Several Actions at Once?
Creating Macros
PowerTouch provides a simple way to create macros:
1. Think about the sequence of events you want to set up. You may even
want to note down which devices should turn on first and how much
time you think should pass between each step.
2. Touch
(Setup) on the Quick Access menu then touch
.
3. Figure out what device you will be using when you want to run the
macro and select a macro line associated with that device.
4. Touch
. Enter a name for the macro. See “How Do I Enter Text?”
on page 8 for more information on entering names.
5. Touch
6. Touch
to save the name in the Macro.
to record the Macro.
7. Perform the control operations of the devices in the order you want
to record them.
8. Touch the
icon to complete the macro recording.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Perform Several Actions at Once?
Modifying a macro
1. Touch
(Setup) on the Quick Access menu then touch
.
2. Select the macro line you want to modify.
3. Touch
.
(Optional) To delete a function:
a. Touch a macro function line you want to delete.
b. Verify that this is the correct function. Touch
(Optional) To insert a function:
.
a. Touch a macro function line where you want to insert a function,
then touch
.
The function line will be inserted before the selected line.
b. Touch a device, then touch an available function.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Perform Several Actions at Once?
4. Touch a device, then touch an available function.
PowerTouch modify the function then returns you to the Macro De-
vice menu.
5. Touch
to return to the Macro Function menu.
6. If some of the functions did not occur, you need to insert delay before
these functions.
To insert a delay (which is stored on its own line as a separate action):
1. Touch the device line whose function did not occur.
2. Touch
.
3. Touch a delay time and touch
. PowerTouch inserts the delay
then returns you to the Macro Function menu.
4. Repeat step “1.” through step “3.” for other functions.
5. Touch
to return to the Setup Macro menu.
6. Touch a Quick Access button to return to the Home1 or Home2 menu.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Perform Several Actions at Once?
Using Macros
Once you have defined macros, you can use them directly from the basic
menus (Home1, Home2) for one-touch operation of several devices.
The VR-5900 has “Perfect Macro” capability. This senses if video devices
connected via the composite jacks, or video monitors with an optional
power sensing device attached are on or off, and will ensure that the macro
works properly.
Perfect Macro is available only with devices connected to the composite
video jacks.
For example, you create a Video On macro where PowerTouch turns the
receiver and all of your video devices on. If your TV is already on when
you run the macro, Perfect Macro will keep it on.
For more information about using a TV power sensing device, see Chap-
ter Four of the Connections and Setup Guide.
There are two ways to use the macros you defined
•
from the Macro Summary menu, which displays all the available
macros
•
from the More screen for each device, which displays the macros as-
sociated with that device
To run a macro from the Macro Summary menu:
1. Touch (Macro) on the Home1 menu or the Home2 menu to
access the Macro menu:
80
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Perform Several Actions at Once?
2. Touch a macro line. If the macro you want is not displayed, use the up
or down arrow
to scroll through the list until you see it.
3. Touch to return to the previous menu.
To run a macro from a device’s “More” screen:
1. Follow the steps under the device name in this chapter to access the
controls for that device.
2. Touch More button.
3. Choose the macro from the list on the under section of the screen.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
How Do I Control Home Automation Equipment?
Your new PowerTouch comes pre-programmed with codes to control
home automation products manufactured by X-10, Lutron, and Makita.
These products enable you to use PowerTouch to dim lights, close or
open drapes, and operate non-audio/video equipment. You can even
control home automation equipment as part of a macro. See “Creating
Macros” on page 66 for more information.
PowerTouch’s control feature works using built-in screens specially de-
signed to emulate the operation of X-10, Lutron, or Makita equipment
remotes. These features require no setup to work with the compatible
products listed.
Simply aim PowerTouch at the device you want to control, then touch
the icon buttons and settings for the tasks you want to perform. Do not
aim PowerTouch at your Kenwood receiver—none of the home automa-
tion devices are connected to it.
Relay control
The devices connected to the RELAY CONTROL connectors on the rear
of the receiver can be switched ON/OFF directly from PowerTouch.
To switch on or switch off th e RELAY CONTROL output usin g
PowerTouch
1. Access either the Home1 or Home2 menu and touch
the Home Automation menu:
to open
2. Touch
82
to relay on or touch
to relay off.
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
X-10 Home Automation
Using an X-10 Home Automation System, you can operate various items
in your home with just a few buttons on your PowerTouch. Dimming
lights and turning any non-audio/video equipment on or off is an easy
task with X-10. All that is required is an X-10 IR converter and X-10 lamp
control modules, which are sold separately.
For more information, see the manual for the particular device you want
to control.
To run your X-10 Home Automation System using PowerTouch:
1. Access either the Home1 or Home2 menu and touch
the Home Automation menu:
to open
2. Touch
to access the X-10 commands:
3. Touch the numbered button that corresponds to the X-10 module
you want to control. For more information, see your X-10 manual.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
•
•
brightens lamp modules.
dims lamp modules.
•
means Select. Use this button to move back and forth be-
tween this group of buttons and the next eight buttons (9-16) on
PowerTouch.
To change the name of a button, refer to "To Customize the
PowerTouch Screen" on page 45 of the Connection and Setup Guide.
4. Touch
to return to the Home Automation menu.
5. Touch any Quick Access menu to change to that menu.
The X-10 IR-543 Converter is compatible with your PowerTouch. Contact
also sells a compatible converter (product number RSU 10037703).
84
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
Lutron
Your PowerTouch can dim or brighten indoor lighting using the Lutron
Spacer System or Lutron GRAFIK Eye devices, which are sold separately.
For more information, see your Lutron manual.
To operate your Lutron controls using PowerTouch:
1. Access either the Home1 or Home2 menu and touch
the Home Automation menu.
to open
2. Touch
to access Lutron commands. Touch
to access ei-
ther the Spacer (shown) or GRAFIK Eye control screens, depending
on which system you use.
3. Use PowerTouch’s screen as your Lutron remote. Refer to your Lutron
manual for more information on these commands.
To change the name of a button, refer to "To Customize the
PowerTouch Screen" on page 43 of the Connection and Setup Guide.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
4. Touch
to return to the Home Automation menu.
5. Touch any Quick Access menu to change to that menu.
Lutron models SP-HT-WH, GRX-IT, and GRX-8IT are compatible with
your PowerTouch. Contact Lutron at:
Lutron Electronics Co., Inc.
7200 Suter Road
Coopersburg, PA 18036-1299
800-523-9466
www.lutron.com
Makita
You can use your PowerTouch to open drapes or blinds in your home.
Your PowerTouch completely replaces these Makita Automatic Drapery
Opener System remotes:
•
•
•
•
ZZRC10
ZZRC20
ZZRC30
ZZRC60
For more information, see your Makita manual for the particular device
you want to control.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
To operate your Makita device using PowerTouch:
1. Access either the Home1 or Home2 menu and touch
the Home Automation menu:
to open
2. Touch
to access the Makita controls:
3. Use this screen as your Makita remote. If you want to control more
than 1 Makita device, touch to cycle through the additional
screens. You can control up to 6 Makita devices. Refer to your Makita
manual for more information on these commands.
To change the name of a button, refer to "To Customize the
PowerTouch Screen" on page 43 of the Connection and Setup Guide.
4. Touch
to return to the Home Automation menu.
5. Touch any Quick Access menu to change to that menu.
To include a new curtain device (up to 6) touch
.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
For more information, contact Makita at:
Makita USA Inc.
14930 Northam Street
La Mirada, CA, 90638-5753
800-851-0537 (telephone)
714-522-8194 (facsimile)
The products and companies listed previously are not owned by or affili-
ated with Kenwood in any way. Please contact these com-panies directly
for further information or to find a retailer near you.
Accessories Control
PowerTouch includes 8 additional buttons for controlling virtually any
device that accepts IR codes. You can use these buttons to control these
devices in two possible ways:
•
•
You can teach the preset IR code to the device.
You can teach the device’s IR code to PowerTouch.
Regardless of whether you teach the accessory PowerTouch’s code or teach
PowerTouch the accessory’s code, these commands can also be included
in PowerTouch’s Macros. See “Creating Macros” on page 66 for more
information.
To teach one of PowerTouch’s preset IR codes to a device:
1. Access either the Home1 or Home2 menu and touch
the Accessories menu:
to open
88
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Control Home Automation Equipment?
2. See the device’s manual for specific information about programming
it with PowerTouch’s accessory codes.
3. Touch a button. This button will control the accessory once you are
done. If the button is already assigned to another accessory, the new
assignment will overwrite the old one.
To change the name of a button, refer to "To Customize the
PowerTouch Screen" on page 43 of the Connection and Setup Guide.
To operate devices assigned to the accessory codes:
1. Access either the Home1 or Home2 menu and touch
the Accessories menu:
to open
2. Touch the button corresponding to the code that you taught
PowerTouch for the device you want to control.
3. Touch a Quick Access menu button to return to the Home1 or Home2
menu.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Three: Using PowerTouch in Multiple
Zones
The VR-5900 offers dual-zone output and control, which enables you to
use a single receiver to control devices and speakers for 2 zones. Due to
its advanced features and controls, you can listen to music in one zone
while a movie plays in the other!
Depending on your tastes and budget, you can set up one of the follow-
ing “sound scenarios” to make full use of the VR-5900’s capabilities:
No additional amplifier for Zone B: You can use the VR-5900’s Speaker
B output for Zone B. This allows you to listen to full surround sound in
Zone A only, or in stereo in Zone A when Zone B is active. The sound in
Zone B will always be in stereo.
Stereo amplifier for Zone B: You use an additional stereo amplifier for
Zone B (connected to the VR-5900’s Second Zone Preouts). This allows
you to hear full surround sound in Zone A even if you are also listening
in Zone B. The sound in Zone B will always be in stereo.
This chapter covers only multiple-zone operation of the VR-5900. See
Chapter Two for general operating instructions.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Switch Control Modes?
How Do I Switch Control Modes?
You can use PowerTouch to operate your receiver and source devices from
2 different zones. To do so, you need to switch control modes to control
the devices from each zone.
To make operations from Zone B easier, we recommend that you pur-
chase a second PowerTouch. That way you can leave one PowerTouch in
Zone A that is always set up for Zone A operation, and another PowerTouch
in Zone B that is always set up for Zone B operation.
Some system control features are not available when the PowerTouch is
set up for multi-zone control.
To switch control modes for Zone A or Zone B:
1. Touch
2. Touch
(setup) on the Quick Access menu to access the Setup menu.
to access multi-zone commands:
3. Touch
to highlight it.
4. Each touch
switches Zone A and Zone B alternately.
The buttons which can be controlled currently are indicated by high-
lighting.
•
•
Zone A controls devices connected for Zone A.
Zone B controls devices connected for Zone B.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Switch Control Modes?
5. Touch
to return to the Setup menu.
If you buy a second PowerTouch, set one to Zone A (and keep it there)
and one to Zone B (and keep it there).
Why Don’t I See All My Devices?
Your Kenwood PowerTouch displays icon buttons for each of the devices
in your home audio-video system that you have identified to the
PowerTouch. If you have not identified a device to the PowerTouch, its
icon button will appear blank (the buttons will be there, but it will not
contain an icon). For more information on identifying devices to the
PowerTouch, see “How Do I Identify Devices?” on page 40 of the Con-
nection and Setup Guide.
When you switch zones, only devices you can control in that zone will
show up as icons on PowerTouch.
Devices connected via digital jacks only cannot be listened to in Zone B.
We recommend that you connect the analog jacks of all devices. You must
use the composite video connections. Only video sources connected with
composite connectors can be viewed in the second zone.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
How Do I Operate Devices?
How Do I Operate Devices?
General instructions for operating any device are given under “How Do I
Operate Devices?” on page 35. Some operations, however, are a little dif-
ferent depending on the zone you are in. The following section discusses
how devices may operate differently in different zones.
Operating Devices in Zone A
To select the speakers for Zone A, press the button for Speakers–A on the
front panel of the receiver.
To set up PowerTouch to control Zone A devices, follow the instructions
under “How Do I Switch Control Modes?” on page 91.
To control a second CD player from Zone A, use
, unless you are
using a Kenwood 200-Disc CD Changer (see below).
Kenwood CD-3280M or CD-2280M 200-Disc CD Changers are specifi-
cally designed to work with the VR-5900 in a dual-zone environment.
Since they contain two CD players, one can play in Zone A while the
other is playing simultaneously in Zone B. Use CD1 to control the changer
for Zone A and CD2 to control the changer for Zone B.
Operating Devices in Zone B
If you are using the receiver’s Speaker B outputs to power the speakers in
Zone B, press the button for SPEAKERS B on the front panel of the re-
ceiver to activate the speakers in Zone B. The Listen Mode in Zone A will
automatically switch to stereo when you turn SPEAKERS B on.
To set up PowerTouch to control Zone B devices, follow the instructions
under “How Do I Switch Control Modes?” on page 91.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter Four: Troubleshooting
Troubleshooting is how you determine what part of a complex system
(like a home theater system) is at fault when the system isn’t working
how you think it should. When you troubleshoot a system, you diagnose
a problem by examining and eliminating possible causes until there’s
only one left. Troubleshooting is easiest when you start with the most
obvious, most common, and most likely and work from there.
Diagnosing your own problems can save you time and aggravation—the
better you understand how to troubleshoot and adjust your own system,
the less time you have to:
•
•
spend on the phone with a customer service representative
do without your receiver because it’s “in the shop”
There are some basic steps to good troubleshooting:
1. Verify the exact conditions when the problem occurs.
This is the most important step in troubleshooting. Whether you fix it
yourself or have to describe it to a technician, you are much more likely
to really solve the problem if you know the exact circumstances sur-
rounding the problem. For example, if you don’t hear anything through
the speakers, it’s useful to know if it only happens when you are listen-
ing to CDs. Knowing that eliminates the speakers themselves as part of
the problem. The more you know about when a problem occurs, the
more likely it is that you or the technician can solve it.
2. Check each part of the signal’s path from source (such as a CD
player) to speaker.
You may also want to test the assumptions you made in step 1: maybe
you haven’t listened to your MD recorder in a while— is there no
sound from it as well? This step will really help narrow down the
possible causes. Test all your connected devices and eliminate the ones
where the problem doesn’t occur. When you’re done with this step,
you’ll probably have found the problem.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Go over all device connections slowly and methodically. Double-
check the settings on your remote.
Wrong or loose connections are the most likely cause of the most
common home entertainment problem: no sound. Use the Connec-
tion and Setup Guide to double-check your connections for each de-
vice. This is especially important with VCRs, tape decks, MD record-
ers, and equalizers, where it’s very easy to swap the “play” and “record”
connections.
You should also check your PowerTouch settings carefully. Did you
set the input to the correct device? (you can also check the front panel
of the receiver) Are you trying to listen to an analog source using a
digital connection?
4. Cables (especially old ones) go bad more frequently than de-
vices do.
Always suspect the cable before its device. For one thing, it’s easier to
test: simply swap the cable with one connected to a device you know
is working. If the problem device works now, it was the cable. You can
generally purchase new cables at most home electronics stores, or via
the Internet.
5. User error is more likely than device failure.
You probably don’t want to hear this, but it’s true. Use this manual to
go over the steps to operate the receiver. Refer to the other devices’
manuals as well.
6. Instruction manuals are your friend.
A good rule of thumb is to check the manual when something doesn’t
work how you expected it to. If you read the manual before calling the
store or taking the device back, you may find the solution to your prob-
lem much more quickly.
The rest of this chapter presents some common problems, grouped by
type, and the steps you can take to resolve them.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
Sound
I don’t hear any sound at all
Check that:
•
•
•
The volume is set at the proper level. See “Adjusting the Volume” on
page 11 of this manual.
Mute is OFF. If the MUTE indicator on the front of the receiver is
blinking, MUTE is ON. See “Muting Sound” on page 15 of this manual.
The proper input (e.g., CD player, Tuner, etc.) has been selected on
the PowerTouch. See “How Do I Operate Devices?” on page 29 of this
manual.
•
•
The proper zone has been selected. See “How Do I Switch Control
Modes?”on page 91 of this manual.
The CD2/Tape2 MONITOR input has not been selected. (If it has,
the CD2/Tape2 MONITOR indicator on the receiver’s front panel will
be lit). See “What’s on the Front Panel of Your Kenwood Audio - Video
Receiver?” on page 2 of this manual.
•
The input mode matches the input signal (e.g., analog vs. digital) that
has been set. See “To set the Input mode manually” on page 23 of
this manual.
•
•
The correct Input Mode (e.g., FULL AUTO) has been set for the digital
input. See “Input Modes” on page 22.
The correct speakers have been activated. See “Turning the Speakers
On” on page 10 of this manual.
Audio is not output only when a 96k fs compatible disc is played.
•
•
•
The optical cable may be bent. Use a new optical cable.
Check that the optical cable connector is connected properly.
Certain DVD player models inhibit digital output. Use analog cables
with such a DVD player.
I can’t hear sound from one or more of the speakers, or the sound
is abnormally low
Check that:
•
All of the speaker wires are connected tightly, not short circuited. See
Chapter One of the Connections and Setup Guide.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
The 96k fs indicator does not light while a 96k fs compatible disc is
being played.
•
•
The indicator will not light unless the DVD player is properly set.
All of the speakers have been activated in the Setup Speakers menu.
See Chapter Two of the Connections and Setup Guide.
•
•
The individual speaker levels are set properly. See Chapter Two of the
Connections and Setup Guide.
The CD2/TAPE2 MONITOR input has not been selected. (If it has,
the CD2/TAPE2 MONITOR indicator on the receiver’s front panel
will be lit). See “What’s on the Front Panel of Your Kenwood Audio -
Video Receiver?” on page 2 of this manual.
•
•
The correct speakers have been activated. See “Turning the Speakers
On” on page 10 of this manual.
The correct listen mode has been selected. See “What Are Listen
Modes?” on page 18 of this manual.
I can’t hear sound from my surround or center speakers
Check that:
•
The proper surround play mode (Dolby Pro Logic, Dolby Pro Logic
II, DSP, MPEG, DTS, DTS-ES or Dolby Digital) has been selected. See
“What are Listen Modes?” on page 18 of this manual.
•
All of the speaker wires are connected tightly. See Chapter One of the
Connections and Setup Guide.
I can hear sound only from the center speaker when Dolby Pro
Logic is selected
Check that the program (e.g., TV show, radio station, VCR tape) is in
stereo. Programs in mono play only through the center speaker when the
receiver is in the Dolby Pro Logic listen mode.
A DTS-ES encoded source is played but it is not decoded in DTS-ES.
Check that:
•
DTS-ES decoding in playback is not available if THX Surround EX is
set to On, THX Surround EX Auto or THX is On. Set THX to Off.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
A Dolby Digital Surround EX-encoded source is played with THX
Surround EX set to “Auto”, but the source is not reproduced in 6.1-
channel audio.
Check that:
•
Some encoded sources (discs) do not contain the recording of the
encoding identification signal. To reproduce such sources in 6.1-
channel audio, set THX Surround EX to ON.
Sound from one (or more) of my devices is abnormally loud or
soft.
Adjust the analog input level for that device:
1. Select the icon for the device. For CD1, DVD, MD/Tape, CD-R,
VIDEO2, VIDEO3, and VIDEO4, also select the Input Analog icon.
2. Touch
(setup) on the main menu.
3. Select
.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
4. Touch
. Every time you select the button the volume will cycle
between 0dB, -3dB, -6dB and back up to 0dB. Select the level that best
matches that of the other sources.
5. Touch
to return to the Setup menu.
I can’t hear any sound in Zone B
Check that:
•
The volume in Zone B is turned up. See “How Do I Switch Control
Modes?” on page 91 of this manual.
•
The Zone B speakers are turned on if using Speaker B outputs for
Zone B (as opposed to Second Zone Pre Outs). See “Turning the Speak-
ers On” on page 10 of this manual.
•
•
The source is connected via an analog jack set (digital inputs are not
sent to Zone B). See Chapter One of the Connections and Setup Guide.
Multiple Zones is activated.
I can’t hear sound from some of my laser discs
Check that the disc contains a digital soundtrack (the disc’s cover will
bear a “digital sound” logo). Some older laser discs contain only analog
soundtracks. If the disc does not have a digital soundtrack, change the
input mode to Analog. See “To set the Input mode manually:” on page 23
of this manual and also read the manual of your laser disc player.
There wasn’t any sound recorded on tapes made on my VCR or
tape deck
Check that:
•
•
The audio cables are connected properly for the device.
The source is connected via an analog jack set (digital inputs are not
sent to Zone B). See Chapter One of the Connections and Setup Guide.
•
Analog has been set as the input type. Digital inputs such as Dolby
Digital, DTS or MPEG need to be downmixed into two channels for
recording to analog media (such as VHS or audio tape). See “Digital
to Analog Recording” on page 72.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound
The initial sound is intermittent or non-existent when I start to
play from a Dolby Digital, DTS, DTS-ES or MPEG source
•
Some DVD players simply have intermittent start-up sound.
•
Check that the correct digital cable is being used. The cable must be a
digital coaxial or optical cable. See Chapter One of the Connections
and Setup Guide.
With a Dolby Digital program or DTS program, the loud sounds
aren’t very loud and the quiet sounds aren’t very quiet
Check that volume extremes are not automatically being balanced. See
“Midnight Theater Function” on page 16 of this manual.
All I hear is loud static when I play DTS discs
•
Check that Digital has been set as the input type. DTS discs do not
output analog sound. See “To Set Input Mode manually” on page 23.
•
DTS discs can only be played in Zone A
I hear a hum when I select the PHONO input
Check that:
•
The audio cables are connected securely to the Phono jack set. See
Chapter One of the Connections and Setup Guide.
•
The turntable is grounded on the receiver. See Chapter One of the
Connections and Setup Guide.
Audio is not output only when a 96 kfs compatible disc is played.
•
The optical cable may be bent. Distribute optical cables as straight as
possible.
•
•
Check that the optical cable connector is connected properly.
Certain DVD player models or DVD discs inhibit digital output. Use
analog cables with such a DVD player.
Sound is intermittent
Attach the provided protective cap to the unused OPTICAL inputs. If the
light from a fluorescent lamp or direct sunlight enters through this con-
nector, the played audio will be intermittent.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Video/PowerTouch
Video
I can’t see the program I’m playing on the TV
There wasn’t any video output to my VCR when I recorded
•
Check that the video source and TV are connected via the same type
of connectors. Component input signals cannot be transmitted via S-
Video or composite connections. All Zone B inputs must be composite.
S-Video is not supported in Zone B.
•
•
Check that the correct video input on the TV is selected.
Check that the video software you record does not have copy guard
protection.
PowerTouch
I don’t see icons for all my devices
You must identify devices for PowerTouch control for them to appear in
the icon bar on PowerTouch. See Chapter Two of the Connections and
Setup Guide.
I don’t see icons for all the devices I set up
Some of the device icons appear only when PowerTouch is set up to con-
trol Zone A and some appear only when PowerTouch is set up to control
Zone B. See “Why Don’t I See All My Devices?” on page 92 of this manual.
When I select a device icon, I don’t see any commands
•
When you start PowerTouch for the very first time, all the possible
icons appear. If you select any of them, there will be no commands in
the command area. You must set up PowerTouch before you can be-
gin controlling devices. See Chapter Two of the Connections and Setup
Guide.
•
Re-enter the setup code for the device. See Chapter Two of the Con-
nections and Setup Guide.
My PowerTouch is slow to respond—sometimes I have to press but-
tons or select commands several times
•
If PowerTouch is in sleep mode (the screen is blank), the first button
press “wakes it up”. The second press performs the action.
•
Your PowerTouch supports 2-way communication with the receiver. If
the Two-way communication indicator on the front of the receiver is lit,
PowerTouch is receiving information. It cannot transmit your new com-
mand until it is finished receiving information from the receiver.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
PowerTouch
My PowerTouch is not responding
•
•
•
•
Make sure you are within the operating range for PowerTouch. See
“How is PowerTouch Powered ?” on page 5 of this manual.
Replace the batteries. See Chapter Two of the Connections and Setup
Guide.
If you’re using an IR receiver, make sure it is connected properly and
turned on. See Chapter Four of the Connections and Setup Guide.
Check the contrast of the PowerTouch’s screen is adjusted properly.
See “How Do I See PowerTouch’s Screen More Clearly?” on page 74.
My PowerTouch is beeping. What does that mean?
The following table includes information about PowerTouch beeps:
Number
1
Tone
high
Meaning
Confirms your most recent button push or
touch
1
low
Indicates that your most recent button
push or touch could not be performed
2
2
high
low
Confirms learning or copying
Indicates that learning or copying was not
successful
PowerTouch does not "learn" new commands or functions.
•
Check that the distance between PowerTouch and the device's remote
is properly set. Do not place the devices remote right against
PowerTouch.
•
•
Check whether the PowerTouch is too close to the receiver, a TV, high-
frequency fluorescent lighting or other electrical appliance.
"Learning" may be not carried out with some devices' remote.
I want to clear all the items in PowerTouch and make it to the fac-
tory-set default condition.
•
While pressing and holding the CONFIRM and VOLUME DOWN
button, use the stylus to press the RESET button at the bottom of the
battery case.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver/Tuner
Receiver/Tuner
My receiver won’t turn on and the STANDBY indicator is flashing
Your receiver is in the “protection” mode.
Check that:
•
The speaker system’s impedance is not too low. See Chapter One of
the Connections and Setup Guide.
•
The speaker wires are not short-circuited. Test the wires as follows to
find the shorted wire and replace it:
1 Turn off the receiver, disconnect the positive and negative speaker
wires of the RIGHT FRONT speaker from the receiver, and turn
the receiver back on.
2 If the STANDBY indicator stops flashing, replace this wire.
3 If the STANDBY indicator does not stop flashing, turn off the re-
ceiver, reconnect the speaker wires, and repeat the first step for the
next speaker.
4 Continue until you have isolated and replaced the shortedwire.
5 See Chapter One of the Connections and Setup Guide.
If none of the above solutions work, reset the microprocessor:
1. Turn the receiver off. (The Power button is OFF position.)
2. Press ON/STANDBY button while pressing and holding the Power
button.
The following settings are cleared:
• The device set as input (Tuner is selected by default)—see “How
Do I Operate Devices?” on page 35 of this manual.
• The volume setting (-48dB is selected by default)—see “Adjusting
the Volume” on page 11 of this manual.
• The tuner’s receiving band (FM is selected by default)— see “Tuner”
on page 57 of this manual.
• The tuner’s frequency (87.5MHz is selected by default)— see
“Tuner” on page 57 of this manual
• The tuner’s preset memory—you will need to reset your stored
radio stations (see Chapter Two of the Connections and Setup Guide)
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver/Tuner
• The surround setting—see “What are Listen Modes?” on page 18
of this manual.
•
The speaker settings—you will need to reset your speaker settings
( see Chapter Two of the Connections and Setup Guide)
Reset the cleared settings before operating the receiver again.
The sound is distorted, and the CLIP indicator on the receiver’s
front panel flashes red continually, or stays red for more than 1
second at a time
Lower the analog input level for the source device you’re listening to.
(Setting the proper input level eliminates distortion that occurs if a source
device’s output level is too high. When this happens, the front panel CLIP
indicator will flash red continually or remain red for periods of 1 second
or longer. Occasional brief flashing of the CLIP indicator is okay).
1. Touch
(setup) on the main menu.
2. Select
.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver/Tuner
3. Touch
. Every time you select the button the volume will cycle
between 0dB, -3dB, -6dB and back up to 0dB.
4. While the source component is playing, reduce the Input Level to -
3dB. If the CLIP indicator still flashes frequently or remains lit for 1
second or longer, reduce the Input Level again to -6dB.
5. Touch
to return to the Setup menu.
I can’t access any RDS (Radio Data System) functions (for U.K. only)
•
•
Confirm that the radio station is broadcasting RDS.
Make sure you use the Auto Memory function to store RDS stations in
memory. See “Storing RDS Stations Automatically” on page 41 of the
Connections and Setup Guide.
I can’t receive a radio station
Check that:
•
The appropriate antenna is connected. See Chapter One of the Con-
nections and Setup Guide.
•
•
The broadcast band is correct. See “Tuner” on page 57 of this manual.
The tuner is set to the correct frequency. See “Tuner” on page 57 of
this manual.
I’m getting a lot of static/interference
•
Check whether the receiver or antenna is too close to a TV or other
electrical appliance.
•
•
Adjust the antenna for best reception.
If you live in an area with weak FM signals, consider a rooftop or an
amplified FM antenna (available at any home electronics store).
When I press a button to tune to a preset station, the receiver does
not respond
Check whether:
•
The receiver has been unplugged for more than three days. If it has,
your settings were cleared from the receiver’s memory. See “My re-
ceiver won’t turn on and the STANDBY indicator is flashing” on
page 103 of this manual.
•
The Tuner input is selected. See “Tuner” on page 57 of this manual.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiver/Tuner
Macro is not running as I programmed.
•
Because PowerTouch can only transmit one command at a time, stag-
ger the timings of the various macro settings so that the commands
are given at different times.
•
•
On or Off command for audio devices may not work correctly if they
are not Kenwood components connected via system control cables.
Depending on the video signals of the connected video devices, TV
power sensing may not work correctly.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
200-Disc CD Changer
D
devices
introductory information ...... 39
operating ................................ 40
operating in multiple rooms . 88
playing CDs ............................ 40
reading and storing disc titles .. 41
warning during PowerTouch load
time ..................................... 42
checklist ............................ 31, 39
identifying to Powertouch ..... 29
operating ......................... 29, 88
devices controlling from each room .. 88
Digital Signal Processor (DSP)
effects........................................... 24
digital to analog recording ............. 61
digital to digital recording.............. 61
dimming receiver front panel ........ 64
display panel ..................................... 2
display screen
adjusting ................................. 62
devices displayed ...................... 4
Dolby Digital .................................. 18
DTS .................................................. 18
DVD player
A
accessories
accessing codes with
PowerTouch ........................ 80
controlling miscellaneous
devices ................................ 84
adjusting PowerTouch display screen
..................................................... 62
analog input, switching .................. 22
AV AUX front panel .......................... 2
operating ................................ 37
switching input ...................... 22
H
B
headphones
balancing volume extremes ........... 16
batteries, maximizing life ............... 62
jack ............................................ 2
using ....................................... 28
home-theater sound ....................... 16
C
CD player
I
operating ......................... 40, 45
operating from room A ......... 88
CD2/TAPE 2 MONITOR indicator light
....................................................... 2
CD-R Recorder
operating ................................ 47
changing front panel display ......... 64
confirm button ............................. 3, 7
custom macros
icons
not appearing on powerTouch
............................................ 87
identifying components .......... 29, 97
Input Analog mode ........................ 21
IR indicator and transmitters ........... 2
items on PowerTouch ....................... 3
creating ................................... 66
operating ................................ 70
107
Download from Www.Somanuals.com. All Manuals Search And Download.
J
O
operating
joystick
moving around on PowerTouch
devices .................................... 29
.............................................. 7
home automation
on PowerTouch ........................ 3
equipment .......................... 72
macros .................................... 70
range ......................................... 5
L
laser disc player, operating ............. 38
listen modes
P
defined .................................... 17
Dolby 3 Stereo ....................... 17
Dolby Digital .......................... 18
Dolby Pro Logic ..................... 17
DSP (Digital Signal Processing)
............................................ 17
DTS (Digital Theater System) 18
MPEG ...................................... 18
setting manually..................... 23
stereo ...................................... 17
Lutron
Perfect Macro .................................. 70
Power On/Standby button ............... 2
R
radio stations, ................................. 52
RDS (Radio Data System)
definition ................................ 54
features ................................... 54
searching for radio stations using
PowerTouch ........................ 55
reading and storing CD titles ......... 42
receiver
contact information ............... 77
operating ................................ 74
changing display mode .......... 64
dimming front panel ............. 64
items on front panel ................ 2
recording ......................................... 59
room A
M
macros
creating ................................... 66
using ....................................... 70
Makita
contact information ............... 80
operating ................................ 77
MD recorder, operating .................. 48
MPEG .............................................. 18
moving around ................................. 7
multiple rooms
operating CD player ............... 88
operating devices ................... 88
setting up PowerTouch .......... 86
sound scenarios...................... 85
speakers, operating ................ 10
speakers, selecting .................. 88
switching control modes ....... 86
operating devices ................... 88
sound scenarios...................... 85
switching control modes ....... 86
mute button ...................................... 3
muting sound ................................. 15
room B
operating devices ................... 88
setting up PowerTouch .......... 86
sound scenarios...................... 85
speakers, operatings ......... 10, 88
switching control modes ....... 86
108
Download from Www.Somanuals.com. All Manuals Search And Download.
S
V
VCR
satellite TV, operating ..................... 33
searching
operating ................................ 36
volume
adjusting ................................. 11
control knob ............................ 2
specific radio programs ......... 55
setting
DSP effects .............................. 25
listen mode manually ............ 23
sound
adjusting ................................. 10
scenarios in multiple rooms.. 85
speakers
levels, adjusting ...................... 13
loudness, adjusting ................ 11
selector keys on receiver .......... 2
tone, adjusting ........................ 12
room A, operating .................. 88
room B, operating .................. 88
Surround Play, checking ................. 19
surround sound
X
X-10 Home Automation System
contact information ............... 74
operating ................................ 72
listen modes ........................... 17
multiple rooms ...................... 85
switching
to analog input ....................... 21
room control modes .............. 86
T
tape deck
operating ................................ 50
tuner
operating ................................ 52
turntable
operating ................................ 51
TV
operating ................................ 32
U
using
joystick to move around .......... 7
macros .................................... 70
PowerTouch in multiple rooms . 85
PowerTouch in the dark ......... 62
PowerTouch’s interface ............ 6
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|