KH2262
ꢀ
Operating and safety instructions
UK
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
1. Intended use ......................................................................................................................4
2. Technical data....................................................................................................................4
Safety Information..............................................................................................................4
3. Connection ........................................................................................................................5
3.1 Inserting the batteries..................................................................................................5
A few useful tips regarding batteries: ................................................................................5
3.2 Connecting the power cable ......................................................................................5
3.3 Connecting the antenna ..............................................................................................5
3.4 Connecting the headphones ......................................................................................5
4. Operation ..........................................................................................................................6
4.1 Switching the device on/off ........................................................................................6
4.2 Adjusting the volume ..................................................................................................6
4.3 Bass-booster function ................................................................................................6
5. Radio mode........................................................................................................................6
5.1 Channel search............................................................................................................6
5.2 Mono/Stereo................................................................................................................6
5.3 Storing a channel ........................................................................................................6
5.4 Recalling stored channels ..........................................................................................7
6. CD mode............................................................................................................................7
6.1 Inserting / extracting a CD ..........................................................................................7
6.2 Play / Pause ................................................................................................................7
6.3 Track selection / fast forward ......................................................................................7
6.4 Stop ............................................................................................................................7
6.5 Programming a track list..............................................................................................8
6.6 Playing a track list........................................................................................................8
6.7 Repeat function ..........................................................................................................8
7. Tape mode ........................................................................................................................8
7.1 Inserting / extracting a tape ........................................................................................8
7.2 Using the tape unit ......................................................................................................9
7.3 Recording from the radio ............................................................................................9
7.4 Recording from CD......................................................................................................9
8. Cleaning and maintenance ................................................................................................9
8.1 External cleaning ......................................................................................................10
8.2 Cleaning the cassette unit ........................................................................................10
8.3 Cleaning the CD unit..................................................................................................10
9. Trouble-shooting..............................................................................................................10
10. Disposal ..........................................................................................................................11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
ꢀ
CD Stereo Radiorecorder
e-bench KH 2262
1. Intended use
2. Technical data
This appliance is designed for casual
home-use. It is not designed for continual
use or for use in a commercial or industrial
context.
Voltage:................................... 230V / 50 Hz
Power consumption (rating):..................11W
Laser class:................................................1
Important safety information!
To avoid fatal danger through electric
shocks:
To avoid fire hazard and the danger of
injuries:
• Make sure that the power cable does not
get wet or damp during operation. Install
the cable so that it cannot be crushed
between two objects, or damaged in any
other way. Should the power cable be
damaged, please let our customer servi-
ce replace it before using the appliance
again.
• Install the device in a position where the-
re is no danger of heat build up - deta-
ched and well ventilated. Never cover the
ventilation slits!
• Avoid additional heat through direct
sun, heating systems, other electrical
appliances etc.
• Never let children and frail people
handle the device without supervision,
as these people may not always judge
potential dangers appropriately.
• The CD unit has a "class 1" laser unit.
There is no immediate danger for your
eyes unless the housing is incomplete
or damaged - if this is the case, then the
appliance must not be used at any
time!
• Disconnect the power cable from the
power supply after using the appliance.
Switching the device off is not sufficient
as voltage remains in the device for as
long as it is connected to the mains
power supply.
• Make sure that no fluids or small objec-
ts penetrate the interior of the device.
• Only use the device in dry surroundings.
Please keep this manual in case of future queries –
and pass it on when transcribing the device to another person!
Download from Www.Somanuals.com. All Manuals Search And Download.
4
ꢀ
3. Connection
3.2 Connecting the power cable
Ꭿ Insert the power cable in the power
socket on the device, and then insert the
mains power plug in the mains socket.
Before you start using the device, please
check that the device is in good order and
condition, and make sure that all packa-
ging material has been removed.
3.3 Connecting the antenna
The device is equipped with an internal
antenna for medium wave (AM) reception.
൴ A telescopic antenna provides FM
reception.
3.1 Inserting batteries
Ꭾ Open the battery compartment at the
back of the device, as well as …
Ꭽ the cover of the battery compartment for
the radio channels memory.
The place the following in the battery
compartment ...
3.4 Connecting the headphones
Headphones should have an internal resi-
stance (impedance) of 32 ohm and be
equipped with a 3.5mm stereo jack.
• 3UM-3 AA batteries for the radio
channel memory and
• 8 UM-1 D batteries for operation of
the device.
Warning: Never connect the headphones to
the device when you are already wearing
them.You can severely damage your ears if
the volume is set at a high level.
• Please make sure that the batteries are
inserted in the correct position, i.e. the
"+" end of the battery is inserted to
match the "+" symbol on the device
(polarity).
൵ Always ensure that the volume control is
turned to quiet - then ...
• Then close the housing and the battery
compartment
൳ insert the connection plug into the
socket provided for the headphones.
A few useful tips regarding batteries:
• Only use high quality batteries.
• Always insert new and matching batte-
ries only, in order to avoid the batteries
self-discharging.
The internal loudspeakers are disabled as
soon as the headphone connection plug is
placed in the socket.
When the headphone plug is removed the
speakers will be reactivated - which can
lead to an unexpected volume level if the
volume was turned to high when using the
headphones.
• Renew the batteries as soon as the per-
formance in battery mode fades, howe-
ver, not later than one year after insertion.
Batteries sometimes begin to corrode
after this time.
൵ For this reason the volume level should
be lowered before the headphone plug is
removed from the socket.
• Batteries must not be disposed of in the
normal rubbish bin. Always return used
batteries to the retail outlet or other
collection points for disposal.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
ꢀ
4. Operation
This section applies when the device has
been connected as described in chapter 3:
4.1 Switching the device on/off
൶ The device is equipped with a
FUNCTION sliding switch for all three
modes:
To search the bandwidth press the
button ...
TUNINGꢀ , to search forwards or
TUNINGꢁ , to search backwards over
the entire reception range.
If you apply pressure to the buttons lon-
ger than a second the device will start an
automatic channel search. As soon as a
channel with sufficient reception quality has
been found, the automatic search stops
immediately.
The device is switched on and is consu
ming electricity when the switch is
switched to …
• "Radio" for radio mode
• "CD" for CD mode.
The device is switched off when the
switch is switched to position ...
• "TAPE/POWER OFF". This also the
position for tape mode. In this position,
the device consumes near to no
electricity, as long as none of the tape
operating keys are pressed.
Tip: When in VHF reception (FM) mode,
you will achieve better reception quality by
putting the antenna into at an angle. Then
turn the antenna until the best reception is
found.
For medium wave (AM) reception, the
device uses the internal antenna. Turn the
entire appliance until you achieve the best
reception result.
4.2 Adjusting the volume
൵ Turn the volume control clockwise (lou-
der) - or anti clockwise (quieter).
5.2 Mono/Stereo
4.3 Bass-booster function
൸ Press the BASS BOOST switch to
activate or deactivate the Bass booster
function.
When a program is broadcast on theVHF
range in stereo, "ST", is displayed on the
device, while "MONO" appears for Mono bro-
adcasts. Should the stereo reception crack-
le due to bad reception …
5. Radio mode
Select "Radio" on the FUNCTION sliding
ൽ press the ST/MONO button to switch
between the two modes.
switch.
5.3 Storing channels
5.1 Channel search
൹ Chose a reception bandwidth. By pres-
sing the button BAND you can switch
between ...
You can store a total of 15 channels. When
you have found a channel you would like to
store ...
ൿ press MEMORY .The display shows the
number of the first memory position, and
the"MEMORY" indicator flashes.
ർ You can now browse through the
memory positions by pressing the M-UP
button.
• "FM" for VHF reception or
• "MW(AM)" for medium wave
reception.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
ꢀ
6.2 Play / Pause
When the desired memory number appears
on the display ...
If you press PLAY / PAUSE ...
• For a short time, the CD will start. The
display shows the track number and
track length of the track being played.
• Press again while a track is being played
to pause playback immediately, press
again to continue playing the track from
the position was paused.
ൿ hold the MEMORY button depressed
until the "MEMORY" indicator stops flas-
hing. The channel is now stored.
Already occupied memory positions can be
renewed at will.
5.4 Stored Channels
Call up
6.3 Track selection / fast forward
If you press SKIP >>|
When in the normal reception mode you
can browse through the 15 stored channels
by ...
ڹ or SKIP |<< ... • briefly, you jump one track up or down.
• hold the button pressed to scan
through the track forwards or back-
wards (fast forward/backwards).
ർ pressing the M-UP button. The channels
are activated one after the other.
Note:The channels remain stored in the
device memory as long as the three small
batteries for the radio memory still have
enough power.
6.4 Stop
ൻ If you press STOP ■ ...
• Once, the CD stops playing the current
track.
6. CD mode
When this function is selected, you can
listen to normal Audio CDs, as well as CD-
R/RW recorded in audio format.
G Select the "CD" FUNCTION switch.
• Twice, the programmed track lists is
deleted as described in chapter 6.5.
6.1 Inserting / extracting a CD
Keep the CD drive closed unless you are
inserting or removing a CD to prevent dust
from penetrating the device.
൷ To open the unit lift the CD drive cover.
• You can now insert the CD with the
printed side facing upwards.
The CD is ready for playing when the dis-
play shows the number of tracks on the CD,
and the total playing time.
The CD is not ready for playing as long as
the word "disc" is displayed. If this continu-
es for some time, then the CD cannot be
read correctly - check that the CD has been
inserted the right way round and it is in
good condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
ꢀ
6.5 Programming a track list
You can program a track list with up to 16
tracks. To do this the CD has to be stopped.
When a CD is inserted:
Note: The programming information all 16
track positions is deleted as soon as the CD
tray is opened or the CD is stopped and ....
ൻ STOP ■ is pressed!
ൿ Press MEMORY.
The display now shows "Pr.01" indicating the
first memory position of the track list - follo-
wed by the number of the track already allo-
cated to this position.
6.7 Repeat function
If, during playback of a track or track list …
ൽ you press REPEAT …
Use SKIP >>| or ...
• Once, the current track is repeated.
REPEAT" flashes on the display.
ڹ the SKIP |<< button, you can now sel- ect the track to be played first.
• Twice, the entire CD or track list is
repeated. REPEAT" is displayed conti-
nuously during playback.
ൿ Now press MEMORY again to save the
selected track in position 1 of the pro-
grammed track list.
• Three times, the repeat function is dea
tivated. REPEAT" is no longer displayed.
Call the next program position
by pressing …
7. Tape mode
SKIP >>| or
You can play all standard tapes, as well as
record from the radio and from CDs.
൶ Select "TAPE" on the FUNCTION
switch.
ڹ SKIP <<| . The display now shows the number of the
next memory position.
Now select the track from the CD that you
want to program in this track position
• using the button ...
7.1 Tape insert / remove
Keep the tape deck closed unless you are
inserting or removing a tape to prevent dust
from penetrating the device
ڹ SKIP >>| or
SKIP |<< .
ൺ Press the STOP/EJ button until you can
hear the tape door unlocking and it
opens automatically.
Now press …
MEMORY to save this track in the
position previously selected.
ൿ
• Now insert the tape with the mechanism
facing up:
You can check your program track list by
pressing MEMORY to scan through all
occupied track positions.
• Now close the tape compartment door.
6.6 Playing a track list
If you have programmed a playlist , play as
described in 6.5.
ൿ Press PLAY/PAUSE to start the program
med playlist.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
ꢀ
7.2 Using the tape unit
7.4 Recording from CD
൶ Select the "CD" FUNCTION switch.
● Press RECORD and simultaneously ...
❙❙ the PAUSE key. The device is now
ready to record.
Warning: Always press the STOP / EJ but-
ton first and let the tape stop before you
switch modes. This will prevent damage and
the device wearing out prematurely.
Press PAUSE (deactivate) again as soon
as the CD is started.
K The button symbols mean the following
for tape mode:
Press PAUSE again to interrupt recor-
ding.
̇ PLAY = play a tape
❙❙ PAUSE = stop/start pause
<< FFWD = fast forward
>> REW = rewind
■ Press STOP/EJ to stop recording.
Note:The recording volume is controlled
automatically and is not determined by the
volume control switch.
● RECORD = record
■ STOP/EJ = stop and eject tape
The tape stops automatically at the end of
the tape. Remove the tape, turn it over, and
replace to play or record on the other side!
8. Cleaning and maintenance
Never open the device housing. There are
no operating elements inside. An opened
device housing could cause potential life
endangerment through electric shock.
Before cleaning the outside of the device,
…
7.3 Recording from the radio
൶ Select "RADIO" on the FUNCTION
switch.
• First remove the mains connector from
the mains socket.
When you find a radio station you want to
record from:
൶ Select the "TAPE" FUNCTION to order
to switch the device off.
● Press RECORD to start recording.
• If batteries are still in the device: Only
remove the large batteries, not the small
ones. Otherwise the stored radio chan-
nels will be lost.
❙❙ Press PAUSE to pause the recording.
■ Press STOP/EJ to stop recording.
• Close all openings, i.e. the battery com-
partment, tape and CD trays.
Note: The recording volume is controlled
automatically and is not determined by the
volume control switch.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
ꢀ
8.1 External cleaning
9. Trouble-shooting
• Clean all outside surfaces with a moist
If a thorough cleaning of the CD or tape unit
does not resolve the problem, it may not be
caused by dirt contamination, but could a
problem with the device.
but not wet cloth.
• Do not use any sort of aggressive clea-
ning fluids. These could damage the
external plastic housing.
• In this case, please return the device to
our customer service center.
8.2 Cleaning the cassette unit
This could be necessary if you notice the
tape sound becoming slightly muffled after
several weeks use. If you are sure the tape
is not the cause of this problem, ...
• Clean the tape heads and mechanism
with special tape cleaning materials
from specialist retailers - never use any
sort of tools. This could damage the devi-
ce.
If confusing symbols appear on the dis-
play, it is possible that the device's internal
operating system has "crashed".
• Disconnect the power cable and ...
• Remove the eight large batteries from
the battery compartment.
Wait a few minutes before restarting the
device. If no improvement should result
from this …
8.3 Cleaning the CD unit
The CD player should not become dirty
from normal use! Cleaning may be neces-
sary if exceptionally dirty CDs are used, or
the CD tray is not closed and dust enters
the system.
• Repeat the two steps explained above
and …
• Now also remove the three small batte-
ries from their compartment. This may
cause some or all preset radio stations to
be lost!
Avoid dirt contamination by wiping dusty
CDs with a soft, dry cloth, wiping from the
inside to the outside of the CD.
Wait a few minutes before restarting the
device. If the situation has not been resol-
ved by this measure, the device may be
faulty.
If a CD cannot be played or sounds faulty
although it is in good condition …
• Clean the lense and mechanism with a
cleaning CD from a specialist retailer -
never use any other sort of tool. This
could damage the device.
• In this case, please return the device to
our customer service center.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
10. Disposal
Before you dispose of the device, remove
batteries as described in chapter 3.1. Old
batteries cannot be disposed of in the
general house rubbish bin.
• Always return used batteries to the retail
outlet or other collection points for dis-
posal.
Other than the batteries, the device does
not include any materials that are subject to
a special disposal law (as of Sept. 2003)
• Please contact your local government
office about any recent changes regar-
ding disposal laws.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|