Part names
Specifications
Safety precautions
Format
System ........................................................... Compact disc digital audio system
Laser ..................................................................................... Semiconductor laser
Frequency response ........................................................ 20 Hz to 20 kHz, 3 dB
PHONES output level (32Ω, 1 kHz ) ............................................... 9 mW + 9 mW
Line output/impedance (BASS BOOST on) .............................. 0.48 Vrms/47 kΩ
Caution : Read this page carefully to ensure safe operation.
Unit
Display
Audio
PORTABLE CD PLAYER
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
Power supply
External DC supply ................................................................................. DC 4.5 V
Repeat mode indicator
Ramdom mode indicator
Intoro scan indicator
DPC-X337
INSTRUCTION MANUAL
Rechargeable batteries (NB-3A70) x 2 ................................................. DC 2.4 V
Commercially-available alkaline batteries (LR03) x 2........................ DC 3.0 V
Battery life (Fully charge)
IMPORTANT SAFEGUARDS
Program mode indicator
Please read all of the safety and operating instructions before operating this appliance. Adhere to all warnings on the appliance and in the instruction
manual. Follow all the safety and operating instructions. These safety and operating instructions should be retained for future reference.
D.A.S.C. On
D.A.S.C. Off
Rechargeable batteries (NB-3A70)
Approx. 6.5 Hours
Approx. 5 Hours
1. Power sources — The appliance should be connected to a power supply only of the
12.Magnetic fields — Keep the appliance away from sources of magnetic fields such
Battery duration
indicator
Commercially-available alkaline
batteries (LR03)
type described in the instruction manual or as marked on the appliance.
as TV sets, speaker systems, radios, motorized toys or magnetized objects.
Approx. 10 Hours
Approx. 6.5 Hours
2. Power-cord protection — Power-supply cords should be routed so that they are
not likely to be walked on or pinched by items placed upon or against them, pay
particular attention to cords at plugs, convenience receptacles, and the point where
they exit from the appliance.
13.Cleaning — Unplug this appliance from the wall outlet before cleaning. Do not
use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to
clean the cabinet. Use a clean dry cloth.
Å
ı
�
Î
÷ At 0.1mW+0.1mW output (32Ω load).
Track number display
÷ Standard value during continuous use/charging in an temperature of 20˚C.
÷ Time of use may vary depending on battery maker, battery type, use environ-
ment, and temperatute.
Ï
Ì
Playng time display
D.A.S.C. mode indicator
14.Nonuse periods — The power cord of the appliance should be unplugged from
‰
Dimensions (W x H x D) ................. 137 mm x 20.5 mm x 137 mm (5- 3/8" x 13/16" x 5-3/8")
Weight (net) ........................................................................................................171 g (6.0 oz)
3. Enclosure removal —Never remove the enclosure. If the internal parts are touched
the outlet when left unused for a long period of time.
accidentally, a serious electric shock might occur.
15.Damage requiring service — The appliance should be serviced by qualified
service personnel when:
Note:
4. Drop — Do not drop the appliance or apply strong shock to it. (Damage due to
Before using the rechargeable batteries:
(For Europe)
÷ The rechargeable batteries comes non-charged condition.
Read "Rechargeable battery operation" carefully and charge
the batteries before use.
KENWOOD follows a policy of continuous advancements in development. For this reason
specifications may be changed without notice.
dropping the appliance is not covered by the warranty.)
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally by following the instruc-
tion manual. Adjust only those controls that are covered by the instruction
manual as an improper adjustment of other controls may result in damage
and will often require extensive work by a qualified technician to restore the
appliance to its normal operation.
ø�
5. Ventilation — Avoid hindering the ventilation of the appliance by covering it with a
Accessories
cloth, etc.
Ó
¬� Ô
Ò�
˜
ˆ�
For Europe
For other countries
6. Abnormal smell — If an abnormal smell or smoke is detected, immediately turn
the power OFF and pull out the power cord. Contact your dealer or nearest service
center.
AC adaptor
Rechargeable Batteries
Headphones
1
2
1
—
—
1
Unpacking
Unpack the unit carefully and make sure that all the accessories are
present.
Å D.A.S.C.(Digital Anti Shock
Circuit) key
ı P.MODE (Play mode) key
Ç PROGRAM key
Î Display
‰ SKIP/SEARCH 4, ¢
(Skip/Search) keys
Ï PLAY/PAUSE 38(Play/Pause) key
Ì STOP 7 (Stop/Off) key
Ó OPEN switch
Ò LINE OUT jack
˜ PHONES jack
ˆ DC IN (External power) jack
7. Heat — Avoid placing the appliance under direct sunlight or near a source of heat
such as heating equipment. Particularly, never leave it in an automobile or on the
dashboard.
If any accessories are missing, or if the unit is damaged or fails to oper-
ate, notify your dealer immediately. If the unit was shipped to you di-
rectly, notify your shipper immediately. Kenwood recommends that you
retain the original carton and packing materials in case you need to move
or ship the unit in the future.
E. The appliance has been dropped, or the enclosure damaged.
F. The appliance exhibits a marked change in performance.
Separately sold option part
Rechargeable Nickel Metal Hydride Battery ................................................................ NB-3A70
(Slide to open top cover)
¬ HOLD switch
Ø IND. (Battery charge) indicator
8. Temperature — The appliance may not function properly if used at extremely low,
16.Servicing — The user should not attempt to service the appliance beyond that
described in the instruction manual. All other servicing should be referred to
qualified service personnel.
or freezing temperatures. The ideal ambient temperature is above +5°C (41°F).
Keep this manual handy for future reference.
9. Water and moisture — The appliance shall not be exposed to dripping and splash-
ing - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool, etc.
Ô B.BOOST (Bass Boost) key
VOLUME control knob
For your records
17.CAUTION — TO PREVENT ELECTRIC SHOCK DO NOT USE THE AC PLUG
WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
Record the serial number, found on the back of the unit,
in the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial num-
bers whenever you call upon your dealer for information
10.Dust and moisture — Avoid places where is dusty or where the humidity is high.
11.Vibrations — Avoid placing the appliance on an unstable place such as a shelf or in
or service on this product.
B60-5389-08 00 (E,M) 0302
AP
Model
Serial Number
a place subject to vibrations.
Sound skip guard function (D.A.S.C.)
D.A.S.C. (Digital Anti Shock Circuit)
When the D.A.S.C. function is operating, about a 180 seconds portion of
signals is always stored in memory. Consequently, when the unit re-
ceives an impact, playback will continue without interruption even if the
signal from the light pickup is interrupted.
In case of difficulty
Maintenance
Simple care
Care of lens
When the lens in the pick-up gets dirty, malfunctions in-
cluding the impossibility of playback may occur. The lens
should be cleaned using a commercially available cam-
era lens blower, etc. Do not touch the lens to prevent
damaging the mechanism. Also do not use a lens cleaner
or disc cleaner product.
What seems to be a serious trouble may sometimes be due to a simple mistake. Before calling for
service, check the items shown in the following table again. (If you request servicing due to the
reasons shown in the table, the service may be charged in some cases.)
Cleaning
If fingerprints or foreign matter become at-
tached to the disc, lightly wipe the disc with a
soft cotton cloth (or similar) from the center of
the disc outwards in a radial manner.
Symptom
Cause
Remedy
Pressing a key
cannot initiate an
operation or turn
the unit on.
÷The HOLD switch is set to on ÷Set the switch to off (HOLD
(HOLD On).
Off).
Storage
"Wide CAPTURE" uses a method strong in regard to vibrations in the ro-
tation direction in addition to the conventional D.A.S.C. function, so that
the sound skip guard function is made even stronger.
÷The batteries are exhausted.
÷Replace the two alkaline batter-
ies, or recharge the recharge-
able batteries.
When a disc is not to be played for a long period of time, remove it from the CD
player and store it in its case.
÷The disc is placed upside down. ÷Place the disc with the labeled
side up.
Precaution against condensation
Mechanism of D.A.S.C.
Care of main unit
÷Condensation has occurred in- ÷Leave the unit for about 1 hour
Immediately after a room is heated or in a room with high humidity (or va-
por), the unit may malfunction due to the condensation of dew or mist on
the pick-up lens. In such a case, leave the unit for about an hour before
trying to use it again.
side the unit.
before re-use.
When the unit gets dirty, clean with a soft, dry cloth. If
the unit is stained seriously, a moistened cloth can be used. Do not use thinner,
benzine, alcohol, etc. for these agents may cause discoloration.
÷The AC adaptor is disconnected. ÷Connect it properly.
No sound is heard
from the head-
phones.
÷The headphones are connected ÷Insert the plug securely into the
incompletely.
PHONES jack.
Storage of digital data
÷The headphones are connected ÷Insert the plug securely into the
Cleaning the plug
Wipe the headphone plug with a soft cloth to keep it clean.
A dirty plug may cause noise or malfunction.
to LINE OUT jack
PHONES jack.
÷The volume is set to the mini- ÷Adjust the volume on the unit.
Digital memory
Reproduced
sound
mum position on the unit.
Sound skips, or is
interrupted.
÷The D.A.S.C. is set to off.
÷The D.A.S.C. is set to on.
÷
A strong vibration that exceeds the ÷Place the unit in a place not sub-
Setting the D.A.S.C.
Caution on disc used
Usable discs
This unit is capable of playing back the Audio CD discs, CD-R/CD-RW (CD-DA)
capacity of the D.A.S.C. has occurred.
ject to vibration.
÷Clean it.
The mode changes each time the D.A.S.C. key is pressed.
÷The disc is dirty.
÷The lens is dirty.
÷The lens should be cleaned us-
ing a commercially available
camera lens blower.
÷Clean it.
1 D.A.S.C. off
There is no data compression, so
that listening with high sound
quality is possible.
discs and discs carrying the
marking. Other discs cannot be played. 8 cm
÷The headphone plug is dirty.
÷The batteries are low.
single CDs can be played as they are; do not use a commercially-available single
CD adapter.
÷ Certain CD-R/CD-RW discs may not be played due to recording conditions of
the discs.
÷
Replace or recharge the batteries.
Noise interferes.
÷The headphone plug is dirty.
÷Clean it.
2 D.A.S.C. on : 180 seconds
Data are held for about 180 seconds.
Turn on D.A.S.C. when moving the
player or using it in areas subject to
vibration.
÷The batteries are low.
÷
Replace or recharge the batteries.
÷The headphones are connected ÷Insert the plug securely into the
incompletely.
PHONES jack.
÷
A source of strong magnetism or ÷Install the unit away from a TV
Handling
radio wave, such as a TV set or cel-
lular phone, is present near the unit.
set, cellular phone, etc.
Hold compact discs so that you do not touch the playing surface.
Do not attach paper or tape to either the playing side or the label side of compact
discs.
Rechargeable
batteries cannot be
recharged.
÷Commercially available recharge- ÷Use the exclusive rechargeable
able batteries are used. batteries (NB-3A70).
÷ Depending on the extent of the impact, the data in the memory
may be used up, so the playback skip protection may momentarily
be ineffective.
÷ When the D.A.S.C. function is activated, the disc may stop or start
to rotate.
Never play a cracked or warped disc.
The marking of products using lasers (For countries other than U.S.A.,
U.S.-Military and Canada)
During playback, the disc rotates at high speed in the player. Therefore, to avoid
danger, never use a cracked or deformed disc or a disc repaired with tape or
adhesive agent.
Note :
1. This system uses a microcomputer so it may malfunction due to external noise or interfer-
ence. In such a case, unplug the power cord and remove the batteries, then re-connect the
power cord and insert the batteries again.
2. Erroneous operation may occur when the headphone plug is plugged or unplugged; but this
is not a malfunction.
The marking this product has been classified as Class 1. It means
that there is no danger of hazardous radiation outside the product.
CLASS 1
LASER PRODUCT
÷ The reproduced sound is interrupted during switching.
÷ The D.A.S.C. is set to on when the power turns on.
Location: Back panel
Download from Www.Somanuals.com. All Manuals Search And Download.
DPC-X337 (EN)
|