Kenwood GPS Receiver DDX8046BT User Manual

GPS NAVIGATION SYSTEM

DNX SERIES

DNX9960 DNX7160 DNX7020EX

MONITOR WITH DVD RECEIVER

DDX SERIES

DDX896

DDX8046BT

INSTRUCTION MANUAL

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the

best performance from your new GPS Navigation System/DVD Receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model DNX9960/DNX7160/DNX7020EX/DDX896/DDX8046BT Serial number

US Residence Only

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

Before Use

Downloading the Phonebook

Receiving a Call

During a Call

Call Waiting

Setup Menu

How to Display SETUP Menu Screen

DivX Setup (DNX9/ DDX8 series)

Software Information

User Interface

Language Setting

Making a Call

Touch Panel Adjustment

Clock and Date Setup

Security Setup

Monitor Angle Control

EXT SW Setup

Calling by Phonebook

Calling by Entering a Phone Number

Making a Call Using Call Records

Calling by Voice Recognition

(DNX7/ DDX8 series)

Controlling Tone-based Services

Setting Up the Hands-Free Phone

Voice Registration

(DNX7/ DDX8 series)

Key Word Voice Registration

(DNX7/ DDX8 series)

Phone Number Preset

SMS (Short Message Service)

Setup Memory

Changing Background image

Panel Color Coordinate

Screen Control

Registering Bluetooth Unit

Registering Bluetooth Unit PIN Code

Bluetooth Unit Connection

Bluetooth Hands-Free/Audio

Output Setup

AV Input Setup

AV Output Interface Setup

Camera Setup

Navigation Setup

DSP Bypass Control (DNX7 series)

Speaker Setup

Car Type (DTA) Setup

Channel Level (DNX9/ DDX8 series)

DVD Setup

DVD Language Setup

DVD Parental Level Setup

Disc Setup

USB Setup

iPod Setup

SIRIUS Parental Code Setup

SIRIUS Parental Lock Setup

SIRIUS Skip Channel Select

TV Setup

100

101

102

103

104

Audio Control

Audio Control Menu

Audio Control

Equalizer Control

Graphic Equalizer Setup

Zone Control

Space Enhancer (DNX7 series)

Listening Position

SRS WOW Control (DNX9/ DDX8 series) 76

Surround Control (DNX9/ DDX8 series)

Remote Controller

105

106

107

Battery installation

Remote Controller mode switch

Common operations (AUD mode)

DVD/VCD (DVD mode)

Music CD/Audio file/Video file/ Picture file

(AUD mode)

109

iPod (AUD mode)

Radio (AUD mode)

Navigation (NAV mode)

TV (TV mode)

109

110

111

112

Status bar Indicator items

DVD Language Codes

Help? Troubleshooting

Help? Error

114

115

116

117

119

Specifications

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Use

Lens Fogging

2WARNING

When you turn on the car heater in cold

weather, dew or condensation may form

on the lens in the disc player of the unit.

Called lens fogging, this condensation on

the lens may not allow discs to play. In such

a situation, remove the disc and wait for

the condensation to evaporate. If the unit

still does not operate normally after a while,

consult your Kenwood dealer.

To prevent injury or fire, take the

following precautions:

• To prevent a short circuit, never put or leave

any metallic objects (such as coins or metal

tools) inside the unit.

• Do not watch or fix your eyes on the

unit’s display when you are driving for any

extended period.

Handling discs

• Do not touch the recording surface of the

disc.

• Do not stick tape etc. on the disc, or use a

disc with tape stuck on it.

How to reset your unit

• If the unit or the connected unit fails to

operate properly, press the Reset button.

The unit returns to factory settings when

the Reset button is pressed.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing discs from this unit, pull

them out horizontally.

• If the disc center hole or outside rim has

burrs, use the disc only after removing the

burrs with a ballpoint pen etc.

• Remove the USB device before pressing

the Reset button. Pressing the Reset button

with the USB device installed can damage

the data contained in the USB device. For

how to remove the USB device, see <How

to play media> (page 16).

• When the unit is turned on after pressing

the Reset button, the Initial SETUP screen is

displayed. Refer to <Initial Setup> (page 113).

Discs that cannot be used

• Discs that are not round cannot be used.

Reset button

• Discs with coloring on the recording surface

or discs that are dirty cannot be used.

• This unit can only play the CDs with

Cleaning the Unit

If the faceplate of this unit is stained, wipe it

with a dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the

stain off with a cloth moistened with neutral

cleaner, then wipe it again with a clean soft

dry cloth.

This unit may not correctly play discs which

do not have the mark.

• You cannot play a disc that has not been

finalized. (For the finalization process refer

to your writing software, and your recorder

instruction manual.)

• If you try to load a 3-inch-disc with its

adapter into the unit, the adapter might

•

Applying spray cleaner directly to the unit may

affect its mechanical parts. Wiping the faceplate

with a hard cloth or using a volatile liquid such

as thinner or alcohol may scratch the surface or

erases characters.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

List of playable discs

separate from the disc and damage the

unit.

Disc types

Support

Standard

DVD Video

DVD Audio

DVD-VR

Remark

‡

Other notes

• If you experience problems during

installation, consult your Kenwood dealer.

DVD-R

MP3/WMA/AAC/MPEG1/

MPEG2/DivX*¹Playback

Multi-border/Multisession/

(Playback depends on

authoring conditions)

Compatible with 8-cm (3

inch) discs

• When you purchase optional accessories,

check with your Kenwood dealer to make

sure that they work with your model and in

your area.

• Select a language used to display menus,

audio file tags, etc. See <Language Setting>

(page 80).

• The RDS or RBDS feature won’t work

where the service is not supported by any

broadcasting station.

‡

DVD-RW

DVD+R

DVD+RW

‡

DVD-R DL (Dual layer)

DVD+R DL (Double

layer)

Only video format

DVD-RAM

Music CD

‡

CD-TEXT/8-cm (3 inch)

discs supported.

MP3/WMA/AAC/DivX*¹

playback

Multisession supported

Packet write not supported.

Protecting the monitor

To protect the monitor from damage, do not

operate the monitor using a ball point pen or

similar tool with the sharp tip.

‡

CD-ROM

CD-R

CD-RW

‡

DTS-CD

Video CD (VCD)

Super video CD

Photo CD

CD-EXTRA

Only music CD session can

be played.

HDCD

CCCD

Dualdisc

Super audio CD

Only CD layer can be

played.

‡ : Playback is possible.

% : Playback is partly possible.

× : Playback is impossible.

⁄

*¹DNX9960, DDX896, DDX8046BT only

•

When buying DRM enabled contents, check the

Registration Code in the <DivX Setup> (page 79).

Registration Code changes each time a file with

the displayed Registration Code is played to

protect against copying.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Use of "DualDisc"

: Folder

: Audio ﬁle

Audio file

Root

Folder

(1)

When playing a "DualDisc" on this unit, the

surface of the disc that is not played may

be scratched while the disc is inserted or

ejected. Since the music CD surface does not

conform to the CD standard, playback may be

impossible.

¡!

¡"

¡#

¡$

(A "DualDisc" is a disc with one surface

containing DVD standard signals and the

other surface containing music CD signals.)

¡%

¡P

An online manual about audio files is put

on the site, www.kenwood.com/cs/ce/

audiofile/. On this online manual, detailed

information and notes which are not

written in this manual are provided. Make

sure to read through the online manual as

well.

About Audio files

Playable Audio file

AAC-LC (.m4a)

MP3 (.mp3)

WMA (.wma)

Linear PCM (WAVE) (.wav) *¹

•

⁄

About Video files

*¹Mass-storage-class USB device only

•

Acceptable video files

•

If music of normal CD and other playback systems

are recorded in the same disc, only the playback

system recorded at the first setout is played.

Acceptable media

MPEG1 (.mpg, .mpeg, .m1v)

MPEG2 (.mpg, .mpeg, .m2v)

DivX (.divx, .div, .avi) *¹

H.264/MPEG-4 AVC (.mp4, .m4v) *²

WMV 9 (.wmv, .m2ts) *²

•

CD-R/RW/ROM, DVD R/RW, mass-storage-

class USB device, iPod with KCA-iP301V

•

Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file

name.

⁄

*¹DNX9960, DDX896, DDX8046BT only

*¹CD-R/RW/ROM, DVD R/RW only

*²Mass-storage-class USB device only

Playable USB device file system

FAT16, FAT32

•

Acceptable media

Although the audio files are complied with

the standards listed above, the play maybe

impossible depending on the types or

conditions of media or device.

CD-R/RW/ROM, DVD R/RW, mass-storage-

class USB device, iPod with KCA-iP301V

Acceptable discs, disc formats, USB device

file system, file and folder names and playing

order are the same as those for audio files.

See <About Audio files>.

•

Playing order of the Audio file

In the example of folder/file tree shown

below, the files are played in the order from

① to ⑩.

About Picture files

•

Acceptable picture files

JPEG (.jpg, .jpeg)

PNG (.png)

BMP (.bmp)

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

•

Acceptable media

Mass-storage-class USB device

iPod, the music that has been played by the

iPod is played first.

In this case, "RESUMING" is displayed

without displaying a folder name, etc.

Changing the browse item will display a

correct title, etc.

Acceptable discs, disc formats, USB device

file system, file and folder names and playing

order are the same as those for audio files.

See <About Audio files>.

• When the iPod is connected to this unit,

"KENWOOD" or "✓" is displayed on the iPod

to indicate that you cannot operate the

iPod.

iPod/iPhone that can be connected

to this unit

Made for

• iPod nano (1st generation)

• iPod nano (2nd generation)

• iPod nano (3rd generation)

• iPod nano (4th generation)

• iPod nano (5th generation)

• iPod with video

About USB device

• In this manual, the word "USB device" is

used for a flash memory device and digital

audio players can be recognized as mass-

storage.

• When the USB device is connected to this

unit, it can be charged up provided that this

unit is powered.

• Install the USB device in the place where it

will not affect driving safely.

• iPod classic

• iPod touch (1st generation)

• iPod touch (2nd generation)

Works with

• iPhone

• iPhone 3G

• You cannot connect a USB device via a USB

hub and Multi Card Reader.

• iPhone 3GS

• Take backups of the audio files used with

this unit. The files can be erased depending

on the operating conditions of the USB

device.

We shall have no compensation for any

damage arising from any erased data.

• No USB device comes with this unit. You

need to purchase a commercially available

USB device.

• When connecting the USB device, usage of

the CA-U1EX (option) is recommended.

Normal playback is not guaranteed when

a cable other than the USB compatible

cable is used. Connecting a cable whose

total length is longer than 5 m can result in

abnormal playback.

• Update iPod/iPhone software to the latest

version.

• You can control an iPod/iPhone from

this unit by connecting an iPod/iPhone

(commercial product) with Dock connector

using an optional accessory iPod

connection cable (KCA-iP301V). The word

"iPod" appearing in this manual indicates

the iPod/iPhone connected with the KCA-

iP301V (optional accessory).

• By connecting your iPod/iPhone to this unit

with an optional accessory iPod connection

cable (KCA-iP301V), you can supply power

to your iPod/iPhone as well as charge it

while playing music. However, the power of

this unit must be on.

⁄

• If you start playback after connecting the

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Navigation units that can be

connected to this unit (DDX series

only)

About the Cell-Phone

This unit conforms to the following Bluetooth

specifications:

• KNA-G610

• KNA-G630

Version

Profile

Bluetooth Standard Ver. 2.1 + EDR

HFP (Hands Free Profile)

OPP (Object Push Profile)

• Update the navigation software to the latest

version. For how to update the software,

refer to the instruction manual of the

navigation unit.

PBAP (Phonebook Access Profile)

SYNC (Synchronization Profile)

For the latest information on connectable

navigation units, access www.kenwood.

com/cs/ce/.

For the cell-phones verified for compatibility,

access the following URL:

http://www.kenwood.com/cs/ce/bt/

⁄

About Satellite Radio tuner

• The units supporting the Bluetooth

function have been certified for conformity

with the Bluetooth Standard following the

procedure prescribed by Bluetooth SIG.

However, it may be impossible for such

units to communicate with your cell-phone

depending on its type.

This unit supports Satellite Radio tuners

which are released by SIRIUS and XM.

Optional accessories below are necessary for

connection.

SIRIUS tuner : Conversion cable CA-SR20V

XM tuner : XM interface Box KCA-XM100V

Refer to the instruction manual of Satellite

radio tuner.

• HFP is a profile used to make a hands-free

call.

• OPP is a profile used to transfer data such as

a phone book between units.

HD Radio™ Tuners that can be

connected to this unit

• KTC-HR300

• KTC-HR200

About the Bluetooth Audio player

This unit conforms to the following Bluetooth

specifications:

When you connect an HD Radio, Tuner

features of the unit are disabled and changed

to HD Radio tuner features.

Version

Profile

Bluetooth Standard Ver. 2.1 + EDR

A2DP (Advanced Audio Distribution Profile)

AVRCP (Audio/Video Remote Control Profile)

TV tuner that can be connected to

this unit

Analog TV tuner

⁄

• KTC-V300N

• A2DP is a profile designed to transfer the

music from an audio player.

• AVRCP is a profile designed to control

playback and selection of music by an

audio player.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as

shown in the following map.

DVD disc marks

Operation regulatory marks

With this DVD, some functions of this unit

such as the play function may be restricted

Symbol

Description

Indicates a region number. The discs with this

mark can be played with any DVD player.

depending on the location where the DVD is

playing. In this case, the following marks will

appear on the screen. For more information,

refer to the disc manual.

ALL

Indicates the number of audio languages

recorded. Up to 8 languages can be recorded

in a movie. You can select a favorite language.

Prohibition Mark

Indicates the number of subtitled languages

recorded. Up to 32 languages can be recorded.

If a DVD disc has scenes shot from multiple

angles, you can select a favorite angle.

Discs with limited period of use

Indicates the type of screen for the image. The

left mark indicates that a wide image picture

(16:9) is displayed on a standard TV set screen

(4:3) with a black band at both the top and

bottom of the screen (letter box).

Do not leave discs with a limited period of

use in this unit. If you load an already expired

disc, you may not be able to remove it from

this unit.

16:9 LB

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

How to read this manual

This manual uses illustrations to explain its

operations.

Source Control Screen

The displays and panels shown in this

manual are examples used to provide

clear explanations of the operations.

For this reason, they may be different

from the actual displays or panels

used, or some display patterns may be

different.

Switches to the source control screen to

use various playback functions.

Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 27).

Operation on the Source Control

screen

Selecting a screen item

Select and choose an item on the

screen.

Select the item by touching the button

on the screen.

[38]

Plays or pauses.

Dragging [38] left or right changes the

Audio File

playing position.

Multi Function

Short Press

Press the button, denoted by

[SEEK] Switches the Seek mode.

The mode is switched in the following

order each time you touch the button.

Display Setting

"AUTO1" Tunes in a station with good reception

automatically.

"AUTO2" Tunes in stations in memory one after another.

"MANU" Switches to the next frequency manually.

Change in the screen

With each operation, the screen

changes in the order shown here.

2 sec.

∞

: Continues to the next line.

Continue to touch until the memory

number appears.

: Ends here.

Next page 3

Continue to the next page

The instruction continues to the next

page.

Make sure to flip the page for the rest

of the instruction.

The above operation example with the mark

differs from the actual operation.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

About the model groups

Drag or Flick operation

If different functions are used in

different model groups, the model

groups are described as shown below.

Names of series included in each

model group are as follows:

Press the button, denoted by

It indicates that you scroll icons or

list items left and right by flicking or

dragging them and touch to select the

desired one.

The right mark indicates that they

can be scrolled up and down.

DNX series

DNX9960, DNX7160, DNX7020EX

DDX series

DDX896 DDX8046BT

Function Icon

Icons representing available functions

are shown below.

:Function of DVD-VIDEO

playback.

:Function of Video CD

playback.

:Function of CD (CD-DA)

playback.

DEO

Video CD

:Function of Audio File

playback.

:Function of MPEG file

playback.

Audio File

MPEG

:Function of DivX file playback

:Function of JPEG file playback

:Function of Disc (DVD, CD)

Other marks

Function of USB device.

:Function of FM reception.

:Function of SIRIUS source.

:Function of XM source.

Important precautions are described

to prevent injuries etc.

Special instructions, supplementary

explanations, limitations, and

reference pages are described.

Press 2 seconds or more

Press the button, denoted by

2sec. , for 2 seconds or more.

Indicates to press and hold down the

button until operation starts or the

screen changes.

General precautions and reference

pages are shown on the item.

The left example indicates to press the

button for 2 seconds.

The initial value of each setup is

shown.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Functions of the buttons on the front panel

For DDX series

D E

Security indicator (page 82)

Reset button (page 4)

Remote control

sensor

1 sec. : Press for longer than 1 second

Attenuation of the volume On/Off.

1 sec. Store the tag data of the current music from HD Radio. (page 52)

Volume adjustment.

Displays Graphic Equalizer screen. *¹(page 73)

1 sec. Camera view display On/Off. *²

DNX series and DDX series with navigation unit

Displays the navigation screen.

When the navigation screen has already been displayed, it switches to the navigation

screen with Split Screen Control window.

1 sec. While watching the navigation screen

Picture in Picture function On/Off. *³(page 20)

DDX series without navigation unit

Displays the Top Menu screen. (page 14)

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Functions of the buttons on the front panel

Turns the power On. *⁵

Displays the Source Control screen. (page 18)

In case of visual sources, the playback screen is first displayed and changed to the source

control screen by pressing the button again.

1 sec. Turns the power Off.

Displays the Hands Free Control screen.

1 sec. While watching the Source Control screen

Secondary window function On/Off. *⁴(page 21)

1 sec. While watching the navigation screen

Displays the Screen Control screen. (page 58)

1 sec. While watching the playback screen of a visual source

Displays the Easy Control screen.

Opens the panel and ejects the disc.

Closes the panel.

1 sec. Opens the panel fully.

⁄

The display may not switch to Graphic Equalizer screen in some conditions.

The function of the [AUD] button can be changed to the display off function. See <User Interface> (page

80).

When the Secondary window function (page 21) is activated, this function is disabled.

When the Picture in Picture function (page 20) is activated, this function is disabled.

When the unit is powered off, pressing any one of Î, ¯ and Ï turns it on.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Hooww ttoo DDiissppllay Top Menu SScreen

Top Menu Screen is the entrance to all

the functions. You can select sources and

various setup menus from this screen.

Top Menu screen

Touch the [MENU] button on any screen.

The Top Menu Screen appears.

How to display the Top Menu screen

DDX series without

navigation unit

DNX series and DDX

series with navigation

unit

The Top Menu Screen appears.

When a video screen is displayed

Buttons on the Top Menu screen

For how to operate each source or setup,

see the following pages.

[

] DVD-VIDEO/ Video CD disc (page 22)

]

CD disc (page 26)

Audio file/ Video file disc (page 26)

iPod (page 33)

USB (page 26)

TUNER (page 37)

SIRIUS/ XM (page 45)

HD Radio (page 49)

TV (page 41)

]

Bluetooth Audio (page 54)

Video

]

Standby

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Closes the function bar.

[

]*¹Displays Tools screen of

navigation.

]*¹Displays Where To ? screen of

[

]

navigation.

Custoommiizzaattiioonn ooff TToopp MMenu Screen

Up to 3 sources or setups frequently used

on the Top Menu screen can be registered.

[

]

Switches to the navigation screen.

Switches to the Hands Free Main

]

screen.

1 Display the icon you want to register

[

]*¹Displays Navigation Settings

screen.

]

Displays SETUP Menu screen.

(page 78)

]

Displays Hands Free SETUP screen.

(page 88)

]

Displays Audio Control Menu

screen. (page 72)

Scroll icons left or right by flicking or

dragging to display the desired icon.

]

Displays the EXT SW (External

Switch) Control screen. (page 55)

Changes the screen skin each time

it is pressed. (DNX9/ DDX series only)

]

2 Register the icon

⁄

• *¹Instruction manual of the Navigation part.

(DNX series and DDX series with navigation

unit only)

• For Disc media, iPod, and USB, the input is

switched to the source as the media or the

device is set.

Drag the icon to the desired place.

The buttons listed below are common

for many screens.

[MENU] Displays Top Menu screen.

[

]

Opens the function bar. The

buttons shown below appear.

[

]

Displays the currently

selected source screen.

Displays Audio Control

Menu screen. (page 72)

Displays SETUP Menu screen.

(page 78)

]

Displays the EXT SW

(External Switch) Control screen.

(page 55)

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

7 SD card (DNX series only)

This SD card slot is used to upgrade the

Navigation System.

Howw too ppllaayy mmeeddia

7 Disc media

For how to upgrade the Navigation

System, refer to the instruction manual of

the navigation system.

Press the [0] button to open/close the

front panel.

If a disc is already inserted, it is ejected

by pressing the [0] button.

1 sec.

Press the [0] button for longer than 1

second to open the front panel.

7 iPod

Inserting the SD card

Hold the SD card with the label side up

and the notched section on the right,

and insert it into the slot until it clicks.

Removing the SD card

Push the SD card until it clicks and

then remove your finger from the card.

The card pops up so that you can pull

it out with your fingers.

To disconnect the iPod, stop the

playback by touching the [0] button

on the source control screen, and then

disconnect the iPod. See <Source

Control Screen> (page 34).

Press the [0] button to close the front

panel.

⁄

7 USB device

• The playback starts automatically after loading

the media or connecting the device.

To disconnect the USB device, touch the

[0] button on the source control screen,

and then disconnect the USB device. See

<Source Control Screen> (page 26).

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

While watching the navigation screen

with secondary window

Hoow too DDiisplay the Souurce Coontroll

Screen

On the Source Control screen you can find

all the control buttons for the selected

source.

Source Control Screen

•

For how to use each button, see the

operation pages of each source.

How to display the Source Control

screen

The Source Control Screen appears.

⁄

• The screen will return to the navigation screen

by touching the same part of the Source Control

screen.

While watching the Easy Control Screen

When a video screen is displayed

The Source Control Screen appears.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Oppeerraattiioonn oonn tthhee PPllaayybackk Screen

of Visual Sources

The Playback screen of a visual source

appears.

While watching visual sources, basic

operation is possible by touching the

screen.

The screen has 4 function areas. The

function of each area is different

depending on the sources. (Some areas are

unavailable for some sources.)

While watching the Source Control

Screen

Playback screen of a visual source

The Playback screen of a visual source

appears.

*¹Easy Control Screen

Basic operation of each area

Displays Menu control screen (DVD-

VIDEO source), Picture control buttons

(sources with picture files), or Zoom

control buttons (Video CD).

Switches TV band.

Displays Easy Control Screen. *¹

Reverse search.

Forward search.

Fast Forwards when flicked from 1

Buttons on the Easy Control Screen

[∞] Changes the function as follows by

touching the [∞] button.

[SCRN] Displays Screen Control

screen (page 58).

[TEL] Switches to the Hands Free

to 4.

Fast Backwards when flicked from 1

to 3.

Main screen (page 60).

[EXT SW] Switches to the EXT SW

Control screen (page 55).

•

For the function of each touch control area,

see the pages of each source.

[1], [¡], [4], [¢], [7], [£8]

Buttons for source control. The buttons

are different depending on the source.

See the operation pages of each

source.

How to display the playback screen

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Hooww ttoo DDiissppllay the Navigation

Screen

Picture in Picture function

Two screens, the navigation screen and

source screen, are displayed. When Picture

in Picture function is on, touching the

source screen switches between the

camera image and source image.

DNX series

The navigation screen appears.

1 sec.

DDX series with

navigation unit

Pressing the button for longer than 1

second while the navigation screen is

displayed switches the Picture in Picture

function on/off.

The navigation screen appears.

•

For how to set up and use the navigation

function, see the Navigation Instruction

Manual.

⁄

• For DDX series, an optional navigation system

needs to be connected. See <Navigation units

that can be connected to this unit> (page 8) for

connectable navigation units.

The screen switches between visual

source's playback screen and camera view

screen each time the small window is

touched.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Operation

Secondary window function

Navigation screen with Easy

Control window

You can control audio sources while the

navigation screen is displayed, and view

the navigation information while the

source control screen is displayed.

1 sec.

Pressing the button for longer than 1

second while the source control screen is

displayed switches the secondary window

function on/off.

Navigation screen with Split Screen

Control window

Source Control screen with

navigation window

Buttons on the Secondary window

[

]

Displays the navigation screen with

Information window.

Displays the navigation screen with

Easy Control window.

Displays the navigation screen with

Split Screen Control window.

Displays the currently selected

]

Displays the navigation screen with

Secondary window.

]

Navigation screen with

Information window

source screen.

The button icon to be displayed

varies depending on playing source.

The above icon display is an example

when the source is DVD.

[MENU] Displays the Top Menu screen.

Displays the Source Control screen with

navigation window.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching DVD/Video CD

You can play DVD/Video CD using various functions.

•

Set the remote controller mode switch to "DVD" mode before starting operation, see <Remote Controller

mode switch> (page 105).

Playback Screen

Easy Control Screen

Basic functions are available even when

the playback screen is displayed.

Displays the basic operation buttons on

the screen.

1 Display the Playback Screen

1 Display the Easy Control Screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Operation on the Playback Screen

2 Operation on the Easy Control Screen

Displays the Menu Control 1

Screen or Highlight Control

(When DVD Menu) (page 24).

Displays the Zoom Control

Screen (page 25).

DVD-VIDEO

Video CD

Touching this area during fast

forwarding or fast backwarding plays

a source.

1, 2 Switches to the Playback Screen.

Displays the Source Control Screen.

Displays Easy Control Screen.

[1], [¡] Fast Forwards or Fast

Backwards. Changes the speed (2 times,

3 times, or off) each time the button is

touched.

Touching this area during fast

forwarding or fast backwarding plays

a source.

3, 4

Searches for a chapter.

Selects a scene (when

PBC is On) or a track

(when PBC is Off).

DVD-VIDEO

Video CD

[4], [¢]

Searches for a chapter.

Selects a scene (when PBC is

On) or a track (when PBC is

Off).

DVD-VIDEO

Video CD

Fast Forwards.

Fast Backwards.

[7] Stops playing.

When touched twice, the disc is played

from its beginning when you play it the

next time.

[38] Plays or pauses.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[4], [¢]

DVD-VIDEO

Source Control Screen

Switches to the source control screen to

use various playback functions.

Searches for a chapter.

Selects a scene (when PBC is

On) or a track (when PBC is

Off).

Video CD

1 Display the Source Control Screen

[

], [

]

Slow Forwards or

DVD-VIDEO

See <How to Display the Source Control

Screen> (page 18).

Backwards.

[

]

Switches to the playback screen.

2 Operation on the Source Control

Screen

Information display

Volume Label.

DVD-VIDEO

"Title" Title Number Display

"Chap" Chapter Number Display

"Scene"/ "Track" Scene/Track Number

Display

"3" Play Mode Display

"T"/ "C"/ "R"/ "P" Play Time Display

Use the [TIME] to change play time

display.

[

]

When

appears, the text display

is scrolled by touching it.

Video CD

Multi Function

[

]

Closes the multi function bar.

[38] Plays or pauses.

[7] Stops playing.

When touched twice, the disc is played

from its beginning when you play it the

next time.

DVD-VIDEO

[TREP] Switches the Repeat Play

operations in the following sequence.

Title Repeat, Repeat Off

[CREP] Switches the Repeat Play

operations in the following sequence.

Chapter Repeat, Repeat Off

[0] Ejects a disc.

[1], [¡] Fast Forwards or Fast

Backwards. Changes the speed (2 times,

3 times, or off) each time the button is

touched.

[TIME] Switches the play time display in

the following sequence.

Chapter ("C"), Title ("T"), remaining titles

("R")

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching DVD/VCD

[2], [3], [5], [∞] Selects a menu

Video CD

option.

[REP] Switches the Repeat Play

operations in the following sequence.

Track Repeat, Repeat Off (Available

when the PBC is off)

[Enter] Enters your menu selection.

[Return] Returns to the previous menu

screen.

[TIME] Switches the play time display in

the following sequence.

Track ("P"), remaining discs ("R")

(Effective only when the PBC function

is off)

[Top] Displays the Top Menu.

[Highlight] Highlight Control.

[Exit] Exits the Menu Control 1 screen.

4 Operation on the Highlight Control

[PBC] Turns the PBC On or Off. (only

when VCD Ver 2.0 is in use)

Highlight control lets you control DVD

Menu by touching the menu button

directly on the screen.

DVD-VIDEO Disc Meennu

Selects an option from the DVD-VIDEO

Disc Menu.

1 Display the Playback Screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Display the Menu Control 1 screen

⁄

• To cancel Highlight Control, press the [TEL]

button for longer than 1 second.

• The Highlight Control is cleared automatically

after approximately 10 seconds.

5 Operation on the Menu Control 2

screen

3 Operation on the Menu Control 1

screen

[Menu] Calls the Menu.

[Next] Displays the Menu Control 2

screen.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[Previous] Displays the Menu Control

1 screen.

Video CD Zoom Control

Displays an enlarged VCD screen.

[Angle] Switches the picture angle.

[SUB] Switches the subtitle language.

[Audio] Switches the voice language.

1 Display the playback screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

[Zoom] Displays the Zoom Control

2 Display the Zoom Control screen

screen.

[Exit] Exits the Menu Control 2 screen.

6 Operation on the Zoom Control

screen

3 Operation on the Zoom Control

screen

[Zoom] Changes the zoom ratio at 4

levels (2 times, 3 times, 4 times, or off)

each time you touch.

[Zoom] Changes the zoom ratio at 2

levels (2 times or off) each time you

touch.

[2], [3], [5], [∞] Scrolls the screen in

the direction you touch.

[Return] Returns to the Menu Control

2 screen.

[2], [3], [5], [∞] Scrolls the screen in

the direction you touch.

[Exit] Exits the Zoom Control screen.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Music CD/ Audio File Listening &

Video File/ Picture File Watching

You can recall various control screens during playback of CD, audio file, video file and picture

file.

•

See <List of playable discs> (page 5) for playable discs.

See <About Audio files> (page 6), <About Video files> (page 6) or <About Picture files> (page 6) for playable

files.

[0]

Ejects the disc.

Disc

Source Control Screen

Switches to the source control screen to

use various playback functions.

USB Removes the USB device.

When "No Device" is shown, the

USB device can be removed safely.

If you wish to play it again while

the USB device is connected,

touch it again.

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

[4], [¢] Selects a track/ file.

[Slideshow] in

2 Operation on the Source Control

screen

USB

JPEG

Displays images in the folder currently

being played one after another.

If there is no image in the folder

currently being played, initial

background is displayed.

Displays the folder list. See

<List Search> (page 28).

Disc

USB Displays the music list, video

list, picture list, folder list or link list.

See <List Search> (page 28).

Audio File

MPEG/DivX®

JPEG

Displays the album artwork.

USB

See <Album artwork> (page 29).

[

]

Switches to the playback screen.

Information display

Selects the Disc Text, title or

artist.

Audio File MPEG/DivX®

JPEG

Selects Folder Name, File Name, Title,

Artist Name, Album Name, Year*¹,

Gene*¹, Track*¹, or Comment*¹.

(*¹USB only)

[38] Plays or pauses.

[

], [

Fast Forwards or Fast Backwards.

], [

Selects a folder.

[7] Stops playing.

]

Audio File MPEG/DivX®

"Track" Track Number Display

[

]

Audio File MPEG/DivX®

JPEG

Folder Number Display

File Number Display

Disc

"#### / ####" Total number of file in

the folder and the file number display

"3" Play Mode Display

When touched twice, the disc is played

from its beginning when you play it the

next time.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

"P"/ "R" Play Time Display

Use the [TIME] to change play time

display.

Audio File

MPEG/DivX®

JPEG

[4Line]/ [2Line] Switches the number

of lines displayed in the Information

Display.

[

]

When

appears, the text display

is scrolled by touching it.

[REP] Repeats the present file or data.

[FREP] Repeats the music or data of the

present folder.

Slider control

Use the [CTRL]/ [Slider] to change the

control mode.

USB

[RDM] Starts or stops Random Play

(to play files of the present folder in

random order).

[CTRL]/ [Slider]

control mode to button/slider.

[INFO] Displays music

Switches

USB

Audio File

information (such as Tag) of Audio file

being played.

Displays information of

JPEG

MPEG/DivX®

file being played.

[38] Plays or pauses.

Dragging [38] left or right changes the

playing position.

[Music]

[Video]

Displays the music list.

Displays the video list.

Displays the Thumbnail

USB

[Picture]

USB

Viewer.

Multi Function

[Folder]

[Link]

Displays the folder list.

USB

Audio File

Searches for another song of the

currently selected artist. See <List

Search> (page 28).

[1/2] Switches the multi function

display.

[

]

Closes the multi function bar.

[REP] Repeats the present track.

[RDM] Starts or stops Random Play

(to play music in random order). Not

available if there are only picture files.

[TIME] Switches the play time display

between Track ("P"), and Disc Remaining

Time ("R").

[INFO] Displays music information of

CD-TEXT being played.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Music CD/ Audio File Listening & Video File/ Picture File Watching

Folder opens when touched, and the

files in the folder are played.

Selects the file type to

List Search

Folder list: Searches folders and Audio/

Video/ Picture files stored in media and

devices according to hierarchy.

Play list: Lists and searches music

contained in the USB device.

USB

display.

Returns to the Source Control screen.

[

]

When appears, the text display

is scrolled by touching it.

1 Display the Source Control Screen

See <Source Control Screen> (page 26).

[

ROOT] Moves to the top hierarchy

level.

2 Start List Search

[

TOP] Moves to the top folder.

UP] Moves up a hierarchy level.

CUR] Displays the currently playing

Disc

folder.

Disc

OPEN] Plays songs in the

folder and changes the display.

[

Music or video list

USB

Switches to the lower level of the

category.

Returns to the Source Control screen.

When appears, the text display

is scrolled by touching it.

ALL] Lists all the music in

⁄

[

]

•

Touching 1 displays the previously used

music list, video list, picture list, folder list

or link list.

[

Audio File

the selected category.

3 Select a file

TOP]

Moves to the top

Audio File

category.

Folder list

Disc/USB

UP]

Moves to the upper

Audio File

level of the category.

CUR] Displays the currently playing

category.

]

Returns to the previous screen.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Thumbnail Viewer

USB

Album arrttwoorkk ((UUSSBB))

Searches for songs in an album artwork

in USB.

1 Display the Source Control Screen

See <Source Control Screen> (page 26).

2 Display the artwork Screen

Touching a thumbnail image displays

it in full-screen view.

Returns to the Source Control screen.

[

CUR] Displays the currently playing

folder.

Scrolls to the position of the specified

character

3 Select an artwork

Scrolls to the selected character.

Touching an album artwork plays the

first song in the album.

Returns to the Source Control screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Music CD/ Audio File Listening & Video File/ Picture File Watching

Link search (Audio File in USB)

Searches for another song of the currently

selected artist.

Playback Screen

(Video file, Picture file)

Basic functions are available even when

the playback screen is displayed.

1 Display the Source Control Screen

1 Display the Playback Screen

See <Source Control Screen> (page 26).

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Start Link search

2 Operation on the Playback Screen

3 Select a song

JPEG

USB/SD

Displays the Picture Control Screen

(page 31).

Disc

DivX®

Displays the Menu Control Screen

(page 32).

Touching this area during fast

forwarding or fast backwarding plays

a source.

[

Plays the touched song.

Returns to the Source Control screen.

]

When

appears, the text display

is scrolled by touching it.

Displays Easy Control Screen.

[

CUR] Displays the currently playing

folder.

Touching this area during fast

forwarding or fast backwarding plays

a source.

3, 4 Searches for a file.

Scrolls to the position of the specified

character

⁄

•

Touching these areas during the slide show

of picture files searches for audio files.

Fast Forwards.

MPEG/DivX®

Fast Backwards.

MPEG/DivX®

Scrolls to the selected character.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Easy Control Screen

Picture Control (USB)

(Video file, Picture file)

Adjusting the picture display.

Displays the basic operation buttons on

the screen.

1 Display the Playback Screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

1 Display the Easy Control Screen

2 Display the Picture Control Screen

2 Operation on the Easy Control Screen

3 Adjust the picture display

1, 2 Switches to the Playback Screen.

Touching this area during fast

forwarding or fast backwarding plays

a source.

[

]

Reverses the picture horizontally.

Rotates counter clockwise.

Rotates clockwise.

Displays the Source Control Screen.

[Exit] Ends Picture Control.

[1], [¡] Fast Forwards or

MPEG/DivX®

Fast Backwards.

[4], [¢] Searches for a file. During

the slide show of picture files, touching

the buttons searches the audio file.

[7]

Stops playing.

Disc

[38] Plays or pauses.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Music CD/ Audio File Listening & Video File/ Picture File Watching

Movie MMenu Coontroll (Disc)

Selects an option from the Movie Menu.

1 Display the playback screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Display the Menu Control screen

3 Operation on the Menu Control

screen

[SUB] Switches the subtitle language.

[Audio] Switches the voice language.

[Exit] Exits the Menu Control screen.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Control

You can control and listen to songs in your iPod by connecting an iPod to this unit with

KCA-iP301V (optional accessory). You can also display video contents on this unit when

connecting an iPod with video.

Playback Screen

Easy Control Screen

Basic functions are available even when

the playback screen is displayed.

Displays the basic operation buttons on

the screen.

1 Display the Playback Screen

1 Display the Easy Control Screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Operation on the Playback Screen

2 Operation on the Easy Control Screen

Not effective

Touching this area during fast

forwarding or fast backwarding plays

a source.

Displays Easy Control Screen.

3, 4 Selects the music/video.

1, 2 Switches to the Playback Screen.

Fast Forwards.

Displays the Source Control Screen.

Fast Backwards.

[1], [¡] Fast Forwards or Fast

Backwards.

⁄

• Remove all accessories such as headphone

before connecting an iPod. You may not be

able to control the iPod if you connect it with

accessories attached.

[4], [¢] Music/Video Search.

[38] Plays or pauses.

• When you connect an iPod to this unit, playback

starts from the song you were playing on the

iPod itself (Resume Function).

• If the played song is not a video content, "No

Video Signal" is displayed on the video screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Control

Source Control Screen

Switches to the source control screen to

use various playback functions.

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

2 Operation on the Source Control

Screen

[38] Plays or pauses.

Dragging [38] left or right changes the

playing position.

Multi Function

[38] Plays or pauses.

[1], [¡] Fast Forwards or Fast

Backwards.

[1/2] Switches the multi function

display.

[4], [¢] Selects Next or Previous

Music/Video.

[

]

Closes the multi function bar.

Displays the iPod list. See <iPod List>

[Music] Displays the list of music

category.

(page 35).

Displays the iPod artwork. See <iPod

[Video] Displays the list of video

category.

Album Artwork> (page 36).

[

]

Switches to the playback screen.

[Link]*¹

Searches for another

MUSIC

Information display

song of the currently selected artist. See

<Link search> (page 36).

Selects the Title, Artist Name, Album

Name or iPod Name.

"##### / #####" Total number of

music in the iPod and the music

number display

"3" Play Mode Display

"P" Play Time Display

[REP] Repeats the present file or data.

[RDM]*¹

Starts or stops Random

MUSIC

play.

[ARDM]*¹

Starts or stops Album

MUSIC

Random Play (plays randomly from

current album).

[

]

When

appears, the text display

is scrolled by touching it.

[CTRL]/ [Slider]

Switches

MUSIC

control mode to button/slider.

Music

Slider control

[INFO] Displays the information screen

Use the [CTRL]/ [Slider] to change the

of music/video being played.

control mode.

[Hand] Allows you to operate iPod with

the control of the iPod.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[

]

When

appears, the text display

⁄

is scrolled by touching it.

Disabled when VIDEO is being played.

• [Hand]

ALL] Lists all the music in the

selected category.

– In the iPod Control by Hand Mode, iPod

cannot be operated using this unit.

– This mode is not compatible with music

information display.

– iPod can be operated when it conforms to the

iPod control function.

[

TOP] Moves to the top category.

UP] Returns to previous category.

CUR] Displays the currently playing

category.

Scrolls to the position of the specified

character

iPod List

Lists and searches music/video contained

in the iPod.

1 Display the Source Control Screen

See <Source Control Screen> (page 34).

2 Display the iPod List

Scrolls to the selected character.

⁄

•

Touching 1 displays the previously used

music list, video list, or link list.

3 Select music/video

Categories and music are listed.

Touch a category name to view its

contents. If music title is displayed, the

music is played by touching it.

Returns to the Source Control screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Control

3 Select a song

iPod Album AArtwork

Searches for songs in an album artwork

in iPod.

1 Display the Source Control Screen

See <Source Control Screen> (page 34).

2 Display the iPod artwork Screen

[

Plays the touched song.

Returns to the Source Control screen.

When appears, the text display

]

is scrolled by touching it.

[

ALL] Lists all the music in the

selected category.

[

TOP] Moves to the top category.

UP] Returns to previous category.

CUR] Displays the currently playing

3 Select album

category.

Scrolls to the position of the specified

character

Touching an album artwork twice

plays the first song in the album.

Returns to the Source Control screen.

Link search (Music file)

Scrolls to the selected character.

Searches for another song of the currently

selected artist.

1 Display the Source Control Screen

See <Source Control Screen> (page 34).

2 Start Link search

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Listening

Various control screens appear in the Tuner Source mode.

•

Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller

mode switch> (page 105).

Multi Function

Source Control Screen

Switches to the source control screen to

use various functions.

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

2 Operation on the Source Control

screen

[1/2] Switches the multi function

display.

[

]

Closes the multi function bar.

[P1] – [P6] When [P1] to [P6] buttons

appear, you can recall the stations on

memory.

For memory of broadcasting stations,

see <Auto Memory> (page 38) or

<Manual Memory> (page 39).

[FM] Switches to the FM1/2/3 band.

[AM] Switches to the AM band.

[TI] Turns the Traffic Information

function On or Off.

[SEEK] Switches the Seek mode.

The mode is switched in the following

order each time you touch the button.

Display Setting

"AUTO1" Tunes in a station with good reception

automatically.

"AUTO2" Tunes in stations in memory one after

another.

See <Traffic Information> (page 40).

[4], [¢] Tunes in a station.

Use the [SEEK] to change the frequency

switching.

"MANU" Switches to the next frequency manually.

Display the Tuner Preset List Screen.

See <Preset Select> (page 38).

Information display

[AME] Selects the Auto Memory mode.

See <Auto Memory> (page 38).

[PTY]

Searches station by

Selects the Program Service

program type. See <Search by Program

Type> (page 40).

Name, Title & Artist name, Station

name, Radio Text plus, or Radio Text.

"FM"/ "AM" Band display

"Preset" Preset number

"MHz"/ "kHz" Frequency display

[INFO]

screen. See <Radio Text> (page 39).

[4Line]/ [2Line] Switches

Displays Radio Text

the number of lines displayed in the

Information Display.

[

]

When

appears, the text display

is scrolled by touching it.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Listening

[CRSC]

Switches to Monaural to

Autoo MMemory

Stores stations with good reception in

memory automatically.

decrease noise when reception is poor.

Preset Select

1 Display the Source Control Screen

Lists and selects memorized station.

See <Source Control Screen> (page 37).

1 Display the Source Control Screen

See <Source Control Screen> (page 37).

2 Select a band you wish to store in

memory

2 Display the Tuner Preset List Screen

3 Select the Auto Memory mode

3 Select a station

4 Start Auto Memory

Memorized stations are displayed.

Touch to tune in.

Auto Memory terminates when 6 stations

are stored or when all stations are tuned

in.

Returns to the Source Control screen.

⁄

• The operation ends automatically if you do not

operate within 10 seconds.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Manuall Memory

Radio Text

Stores the current receiving station in

memory.

You can display the radio text. (Only when

receiving the FM broadcast)

1 Display the Source Control Screen

1 Select a station

See <Source Control Screen> (page 37).

2 Select a station you wish to store in

memory

2 Display the radio text

3 Store in memory

Program Service Name, Title & Artist

name, Station Name, Radio Text, or

Category name 1/2 display.

2 sec.

Continue to touch until the memory

number appears.

[

]

When

appears, the text display

is scrolled by touching it.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Radio Listening

Traffic Infoormation

Search by Program Type

When a traffic bulletin starts, any source is

switched to the traffic information and it is

displayed automatically.

A program is tuned when you set its

program type. (Only when receiving the

FM broadcast)

1 Display the Source Control Screen

See <Source Control Screen> (page 37).

2 Set the Traffic information mode

2 Enter Program Type Search mode

3 Select a Program Type

When the traffic bulletin starts...

The Traffic Information screen appears

automatically.

Traffic Information screen

Program Type is displayed. Touch to

select a Program Type.

[Search] Searches for the program type.

It is displayed when the Program type

is selected.

⁄

4 Search a station of the selected

Program Type

• It is necessary to have Traffic Information function

set to On in order to have the Traffic Information

screen appear automatically.

• During reception of traffic information the

adjusted volume is automatically remembered,

and the next time it switches to traffic

information it's automatically the remembered

volume.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Watching

Various control screens appear in the TV source mode. You can only operate TV with the

optional accessory TV Tuner connected.

Easy Control Screen

Function Duriing TV Screen

Displays the basic operation buttons on

the screen.

Basic functions are available even when

the TV screen is displayed.

1 Display the Easy Control Screen

1 Display the TV screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

2 Operation on the TV screen

2 Operation on the Easy Control Screen

Switches to TV1 or TV2.

Displays Easy Control Screen.

3, 4 Selects a channel.

1, 2 Switches to the TV screen.

Displays the Source Control Screen.

[BAND] Switches to TV1 or TV2.

[4], [¢] Selects a channel.

Use the [SEEK] to change the channel

tuning sequence.

[SEEK] Switches the Seek mode. (page 42)

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Watching

[1/2] Switches the multi function

display.

Source Control Screen

Switches to source control screen to use

various functions.

[

]

Closes the multi function bar.

[P1] – [P6] When [P1] to [P6] buttons

appear, you can recall channels on

memory.

For memory of broadcasting stations,

see <Auto Memory> (page 43) or

<Manual Memory> (page 43).

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

2 Operation on the Source Control

Screen

[SEEK] Switches the Seek mode.

The mode is switched in the following

order each time you touch the button.

Display Setting

"AUTO1" Tunes in a station with good reception

automatically.

"AUTO2" Tunes in stations in memory one after

another.

"MANU" Switches to the next frequency manually.

[BAND] Switches to TV1 or TV2.

[AME] Selects the Auto Memory mode.

See <Auto Memory> (page 43).

[4], [¢] Select a channel.

Use the [SEEK] to change the channel

tuning sequence.

Display the TV Preset List Screen. See

<Preset Select> (page 44).

[

]

Switches to the TV screen.

Information display

Channel information display

"TV" Band display

"Preset" Memory Number Display

"ch" Channel display

[

]

When

appears, the text display

is scrolled by touching it.

Multi Function

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Autoo MMemory

Manuall Memory

Stores stations with good reception in

memory automatically.

Stores the current receiving channel in

memory.

1 Display the Source Control Screen

See <Source Control Screen> (page 42).

2 Select a band you wish to store in

memory

2 Select a station you wish to store in

memory

3 Select the Auto Memory mode

3 Store in memory

2 sec.

4 Start Auto Memory

Continue to touch until the memory

number appears.

Auto Memory terminates when 6 stations

are stored or when all stations are tuned

in.

⁄

• The operation ends automatically if you do not

operate within 10 seconds.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Watching

Preset Select

Lists and selects memorized station.

1 Display the Source Control Screen

See <Source Control Screen> (page 42).

2 Start Preset Select

3 Select a station

Memorized stations are displayed.

Touch to tune in.

Returns to the Source Control screen.

] Switches to the TV screen.

[

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

SIRIUS/XM Control (North American sales area only)

Various control screens appear in the Satellite radio source mode. (Only with the optional

accessory Satellite radio connected. To connect the SIRIUS tuner, a conversion cable

CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface

Box KCA-XM100V (optional accessory) is necessary.)

•

This document uses the SIRIUS display as an example.

Displays the ID number when Channel

0 is selected.

Source Control Screen

Switches to control screen to use various

functions.

Displays the SIRIUS ID.

Displays the RADIO ID.

SIRIUS

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

"SR"/ "XM" Band display

"Preset" Preset number

"ch"/ "CH" Channel display

[

]

When

appears, the text display

2 Operation on the Source Control

screen

is scrolled by touching it.

Multi Function

[BAND] Switches the band.

[1/2] Switches the multi function

display.

[4], [¢] Tunes in a station.

Use the [SEEK] to change the frequency

switching.

[

]

Closes the multi function bar.

Display the Category List or Channel

List Screen. See <Category/ Channel

Search> (page 46).

[P1] – [P6] When [P1] to [P6] buttons

appear, you can recall the channel

on memory. For memory of channel

stations, see <Channel Memory> (page

47).

Information display

Displays information concerning music

being played.

[SEEK] Switches the Seek mode.

The mode is switched in the following

order each time you touch the button.

Changes the display from

SIRIUS

Channel Name, Song Title Name,

Artist Name, Composer Name, to

Category Name.

Display Setting

"SEEK1" Tunes channels one after the other.

"SEEK2" Selects channels in memory one after

the other.

Changes the display from

Channel Name, Artist Name, Song

Title Name, to Category Name.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

SIRIUS/XM Control (North American sales area only)

[DIR] You can tune in by entering the

desired channel number. See <Direct

Channel Search> (page 48).

[

]

When

is scrolled by touching it.

[All Channel] Displays all the channels.

Returns to the Source Control screen.

appears, the text display

[INFO] Displays the program

information screen.

4 Select a channel

[SCN] Starts or stops Channel Scan (that

tunes channels one after the other).

[PRE] Lists and selects memorized

channel. See <Preset Select> (page 47).

Cateeggoorry/ Chhaannnneel Search

Specifying the desired category and

selecting a channel.

Selects a channel.

1 Display the Source Control Screen

See <Source Control Screen> (page 45).

Tunes in the selected channel.

[Info Change] Switches the sequence

of the list.

2 Display the Category List or Channel

List Screen

Changes the display from

SIRIUS

Channel Name, Song Title, Artist

Name, Composer Name, to Category

Name.

Changes the display from

Channel Name, Artist Name, Song

Title, to Category Name.

[

]

Display the category list.

Returns to the Source Control screen.

⁄

•

Touching 1 displays the previously used

category list, or channel list.

3 Select a category

Selects a category.

Displays all the channels in the selected

category.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Chhaannnneell MMemory

Preset Select

Stores the current receiving channel in

memory.

Lists and selects memorized channel.

1 Display the Source Control Screen

See <Source Control Screen> (page 37).

See <Source Control Screen> (page 45).

2 Display the SIRIUS Preset List Screen

2 Select a channel you wish to store in

memory

3 Select a channel

3 Store in memory

Memorized channels are displayed.

Touch to tune in.

2 sec.

[

]

Returns to the Source Control

Continue to touch until the memory

number appears.

screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

SIRIUS/XM Control (North American sales area only)

Diirreecctt CChannel Search

Tuning in by entering the desired channel

number.

1 Display the Source Control Screen

See <Source Control Screen> (page 45).

2 Start Direct Channel Search

3 Enter the channel number

Enters the channel number.

[Cancel] Cancels the direct channel

search.

[Clear] Clears the channel number.

4 Tune in the channel

⁄

• The operation ends automatically if you do not

operate within 10 seconds.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

HD Radio™ Control

Various control screens appear in the HD Radio Source mode. (only with the optional

accessory HD Radio tuner connected)

Multi Function

Source Control Screen

Switches to the source control screen to

use various functions.

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

2 Operation on the Source Control

screen

[1/2] Switches the multi function

display.

[

]

Closes the multi function bar.

[P1] – [P6] When [P1] to [P6] buttons

appear, you can recall the stations on

memory.

For memory of broadcasting stations,

see <Auto Memory> (page 50) or

<Manual Memory> (page 50).

[HD FM] Switches to the HD FM1/2/3

band.

[SEEK] Switches the Seek mode.

The mode is switched in the following

order each time you touch the button.

[HD AM] Switches to the HD AM band.

Display Setting

"AUTO1" Tunes in a station with good reception

automatically.

"AUTO2" Tunes in stations in memory one after

another.

"MANU" Switches to the next frequency manually.

[4], [¢] Tunes in a station.

Use the [SEEK] to change the frequency

switching.

[CH ∞], [CH 5] Selects a channel

(program).

Display the HD Radio Preset List

[DIR]* You can tune by entering the

desired frequency or channel number.

See <Direct Search> (page 52).

Screen. See <Preset Select> (page 51).

Information display

Selects the Station Name, Song title,

Artist, Album, or Genre.

"HD FM"/ "HD AM" Band display

"Preset" Preset number

"MHz"/ "kHz" Frequency display

"HD" Channel display

[AME] Selects the Auto Memory mode.

See <Auto Memory> (page 50).

[RCV] The Receive mode switches in the

following order. See <Receive mode>

(page 51).

[INFO] Displays the tuned program

information.

[

]

When

appears, the text display

is scrolled by touching it.

⁄

• * Only with KTC-HR300 (optional accessory)

connected.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

HD Radio™ Control

Autoo MMemory

Manuall Memory

Stores stations with good reception in

memory automatically.

Stores the current receiving station in

memory.

1 Display the Source Control Screen

See <Source Control Screen> (page 49).

2 Select a band you wish to store in

memory

2 Select a station you wish to store in

memory

3 Select the Auto Memory mode

3 Store in memory

2 sec.

4 Start Auto Memory

Continue to touch until the memory

number appears.

Auto Memory terminates when 6 stations

are stored or when all stations are tuned

in.

⁄

• The operation ends automatically if you do not

operate within 10 seconds.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Preset Select

Receive mode

Lists and selects memorized channel.

Sets the radio broadcasts receive mode.

1 Display the Source Control Screen

See <Source Control Screen> (page 49).

2 Display the HD Radio Preset List

Screen

2 Display the Receive mode screen

3 Select the receive mode

3 Select a station

[Receive Mode] The Receive mode

switches in the following order.

"Auto": Automatically tunes to analog

broadcast when there is no digital

broadcast.

Memorized stations are displayed.

Touch to tune in.

"Digital": Digital broadcasts only.

"Analog": Analog broadcasts only.

[

]

Returns to the Source Control

screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

HD Radio™ Control

Diirreecctt SSeeaarrcchh

iTunes Tagging

Tuning by entering the desired frequency

or channel number.

Only with KTC-HR300 (optional accessory)

connected.

Using an iTunes Tagging enabled HD Radio

receiver you can tag your music. When

you hear a song you enjoy on your local

HD Radio station, you only have to press

the [ATT] button for at least 1 second. The

song’s information will then be saved on

this unit. The saved songs will then show

up in a playlist called “Purchased” in iTunes

the very next time you sync your iPod to

your computer. So then you just need to

click and then easily buy and download

the song you were tagging directly from

the Apple iTunes Music Store.

1 Display the Source Control Screen

See <Source Control Screen> (page 49).

2 Start Direct Search

Only with KTC-HR300 (optional accessory)

connected.

3 Enter the frequency or channel

number

Registers a tag

1 sec.

“TAG” will be indicated on the display

when song information can be

registered.

Enters the frequency or channel

The memory usage can be checked

number.

1 Display the Source Control Screen

See <Source Control Screen> (page 49).

[Mode] Switches the search mode to

Frequency or Channel.

[Cancel] Cancels the direct search.

2 Display the Information Screen

[Clear] Clears the frequency or channel

number.

4 Tune in the frequency or channel

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

3 The memory usage can be checked

Select the "Tagging Information" display.

⁄

• Up to 50 TAGs (song’s information) can be

registered to this unit. When iPod is connected,

the TAG information registered to this unit is

transferred to the connected iPod.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Bluetooth Audio Control

You can listen to audio files stored in a Bluetooth audio player or cell-phone.

Before Use

Source Control Screen

• For details on the Bluetooth Audio player which

can be connected, see <About the Bluetooth

Audio player> (page 8).

• You need to register your audio player and cell-

phone before using it with this unit. For more

details, see<RegisteringBluetoothUnit>(page88).

• If you have registered two or more audio

players or cell-phones, you need to select one

of them. For more details, see <Bluetooth Unit

Connection> (page 90).

Switches to control screen to use various

functions.

1 Display the Source Control Screen

See <How to Display the Source Control

Screen> (page 18).

2 Operation on the Source Control

screen

• Sound output speaker can be set. See

(page 90).

[3]*¹Plays.

[7]*¹Stops playing.

[8]*¹Pauses.

[4], [¢]*¹Selects a file.

Information display

Selects Device, Title*², Artist Name*²,

Album Name*², Genre*², Composer*², or

Track Number*².

⁄

• *¹If the Bluetooth Audio player does not support

AVRCP profile, buttons are not displayed.

Operate from the Audio player.

• *²If the Bluetooth Audio player supports

AVRCP1.3 profile, these items can be displayed.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Functions

Exteerrnnaall DDeevviiccee PPower Supply

Control

Muting Audio Volume upon

Reception of Phone Call

Controlling the external device power

supply.

When a telephone call is mode or

received...

The Phone Call ("Call Interrupt") screen

appears, and system is paused.

1 Display the Source Select Screen

2 Display the EXT SW Control screen

Phone Call ("Call Interrupt") screen

When the call ends...

Hang up the phone.

The system resumes playing

automatically.

⁄

• To use the TEL Mute feature, you need to hook

up the MUTE wire to your telephone using

a commercial telephone accessory. Refer to

<INSTALLATION MANUAL>.

3 Control the external device power

supply

You can turn on or off the external device

power supply.

⁄

• You must connect a commercially available relay

unit in order to use this function.

Connect the external device to be controlled to

that relay unit.

• Refer to <EXT SW Setup> (page 83) for information

on setting the power on or off specification.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Voice Control (DNX9960 only)

The unit is equipped with Advanced Speech Recognition function which allows you to

operate it with your voice. The supported languages are US English, UK English, French,

German, Dutch, Italian, and Spanish. For information on the voice commands, refer to

<Voice command table> (separate volume).

•

ASR on the Language Setting screen should be set to "Enabled". See <Language Setting> (page 80).

3 Speak the command

Voice Control

Speak the command. (Ex: Speak "TUNER".)

You will hear a beep.

1 Enter into the Voice control mode

Press the TALK switch.

The screen has changed to the Tuner

Control screen.

You will hear a beep again.

4 Control the source with voice control

Repeat the same procedure as step 2

or 3.

For information on the voice commands,

refer to <Voice command table>

(separate volume).

The buttons enclosed in a green square

support the voice control.

2 Speak the command

Speak the command. (Ex: Speak "Top

Menu".)

You will hear a beep.

5 End the voice control mode

Press the TALK switch.

⁄

•

The voice control is disabled when

displayed on the upper-right corner of the

screen.

•

The voice control is canceled when the screen

is touched or any of the buttons, except the

[VOLUME] button, on the front panel or the

remote control unit is pressed.

The screen has changed to the Top Menu

screen.

You will hear a beep again.

•

The voice control is disabled while talking on

the phone with hands-free.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

•

The voice control is canceled if no operation is

continued for a certain period of time.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen Control

Setting the monitor screen.

[Dimmer] Dimmer Mode Setup

"ON": The display dims.

Screen Control

1 Display the Easy Control Screen

See <Operation on the Playback Screen

of Visual Sources> (page 19).

"OFF": The display doesn’t dim.

"SYNC": Turning the Dimmer function

On or Off when the vehicle light

control switch is turned On or Off.

"NAV-SYNC": Turning the Dimmer

function On or Off according to the

Navigation Day/Night display setting.

(DNX series and DDX series with

navigation unit only)

2 Display the Screen Control screen

[Dyn.Brightness] (Dynamic Brightness)

The function compensates for Over

Exposure and Under Exposure creating

a clearer picture. ( "OFF")

When the navigation screen is displayed,

press the [TEL] button for 1 second or

more.

"OFF"/ "1"/ "2"

[Mode] Selects a screen mode.

You can select any of the following

screen mode.

3 Adjust the picture quality

"Full": Full picture mode

"Just": Justify picture

mode

"Zoom": Zoom picture

mode

[Bright] Brightness Control

[Tint] Tint Control

Displayed for an NTSC system image on

"Normal": Normal

picture mode

Video, iPod, TV or Camera View.

⁄

[Color] Color Control

• The Screen Control screen is displayed only when

you have applied the parking brake.

• The picture quality can be set for each source.

• You can set image quality of screens such as

menu from <Screen Control> (page 87).

Displayed on Video, iPod, TV or Camera

View screen only.

[Contrast] Contrast Control

[Black] Black Level Adjustment

[Sharpness] Sharpness control

Displayed on Video, iPod, USB, TV or

Camera View screen only.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

Various functions can be used in the Hands Free control mode.

of characters.)

• Depending on the type of your cell-phone, the

following restrictions are placed:

Before Use

• For details on the Bluetooth cell-phone with the

hands-free function, see <About the Cell-Phone>

(page 8).

The phonebook data cannot be downloaded

normally.

• You need to register your cell-phone before

using it with this unit. For more details, see

<Registering Bluetooth Unit> (page 88).

• If you have registered two or more cell-phones,

you need to select one of them. For more details,

see <Bluetooth Unit Connection> (page 90).

• To use the Phone Book, it must be downloaded

to this unit in advance. For details, see

<Downloading the Phonebook> (page 59).

• Sound output speaker can be set. See

(page 90).

Characters in the Phonebook are garbled.

• To cancel downloading of the phonebook data,

operate the cell-phone.

Receiving a Call

Downloading thhee PPhhoonneebbook

Downloads the phonebook data from the

cell-phone to this unit so that you can use

the Phonebook of this unit.

[

]

Answering a Phone Call

Rejecting an Incoming Call

⁄

1 By operating the cell-phone, send

the phonebook data to this unit

• While monitoring the camera view, this screen is

not displayed even if a call comes in. To display

this screen, press the [TEL] button or return the

shift knob of car to the drive position.

2 By operating the cell-phone, start the

hands-free connection

⁄

• For the cell-phones which support auto-

download of phonebook:

If the phonebook is not downloaded

automatically for some reasons, follow the

procedure above to download manually.

• For how to operate the cell-phone, refer to the

Instruction Manual that comes with your cell-

phone.

• Up to 1000 phone numbers can be registered for

each registered cell-phone.

• Up to 32 digits can be registered for each

phone number along with up to 50* characters

representing a name.

(* 50: Number of alphabetical characters. Fewer

characters can be input depending on the type

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

Duurriinngg a Call

Makinng a Call

Displaying the control screen and using

various functions.

1 Display the Hands-Free Control

screen

[

]

Switches the voice output

2 Select a dialing method

between phone and speaker.

[DTMF] Outputs dial tone. See

(page 65).

[

]

Disconnecting a call

Adjusting the Voice Volume during a Call

DNX9960

Calls the displayed phone number.

If you have registered a phone number

in the Phonebook, the person's name is

displayed.

Call Waiting

[

]

Calls the displayed phone number.

SMS] Displays the SMS Select

screen. See <SMS (Short Message

Service)> (page 69).

[Redial] Displays the previously called

phone number.

[Preset1], [Preset2], [Home] (DNX9

series)

[Preset1-3] (DNX7/ DDX8 series)

Calls the preset phone number.

For information on how to preset a

phone number, see <Phone Number

Preset> (page 68).

[

]

• Answers another incoming call

with the current call suspended.

• Switching between the current

call and waiting call

Each touch of this button

switches the calling party.

Terminates the current call.

[

Phonebook] Displays the

Phonebook Search. See <Calling by

Phonebook> (page 61).

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[

Outgoing Calls] Displays the

Outgoing Calls screen. See <Making a

Call Using Call Records> (page 63).

Calling bbyy PPhhoonneebboook

You can call a person using his/her phone

number that you have registered in the

Phonebook.

Incoming Calls] Displays the

Incoming Calls screen. See <Making a

Call Using Call Records> (page 63).

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

Missed Calls] Displays the Missed

Calls screen. See <Making a Call Using

Call Records> (page 63).

2 Display the Phonebook screen

[Direct Number] Displays the Dialing

Display screen. See <Calling by Entering

a Phone Number> (page 62).

[Voice] Starts voice recognition.

See <Calling by Voice Recognition>

(page 63). (DNX7/ DDX8 series only)

[BT SETUP] Displays the Bluetooth

SETUP screen. See <Registering

Bluetooth Unit> (page 88).

3 Select the name to call

[TEL SETUP] Displays the Hands Free

Setup screen. See <Setting Up the

Hands-Free Phone> (page 65).

⁄

• While your car is moving, some functions

are disabled for safety reasons. The buttons

associated with the disabled functions become

ineffective if pressed.

• When the Hands-Free Control screen appears,

the name of the connected cell-phone is

displayed for 5 seconds.

Phonebook data list.

Displays the Phonebook name

• The status icons such as

on the control unit may discord from those

displayed on the cell-phone.

• Setting the cell-phone in the private mode can

disable the hands-free function.

and

displayed

beginning with the character you have

touched.

[

]

When

appears, the text display

is scrolled by touching it.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

4 Select the phone number to call

Calling by EEnteerriing a Phone

Number

Makes a call by entering a phone number.

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

2 Display the number input screen

5 Make a call

⁄

• To use the Phonebook, it must have been

downloaded from the cell-phone. For more

details, see the instruction manual of your cell-

phone.

3 Enter a phone number

• Characters with no corresponding name will not

be displayed.

• During search, a non-accent character such as

"u" is searched for instead of an accent character

such as "ü".

Calls the entered phone number.

[Clear] Clears the number.

4 Make a call

You can start talking when the recipient

responds.

⁄

• You can input up to 32 digits.

• This function is unavailable while driving.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Makingg a Call UUsing CCaall Records

Calls by selecting a phone number from

the outgoing, incoming, or missed calls list.

Calling by Voice Recognition

(DNX7/ DDX8 series)

Calls by recognizing the registered voice.

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

⁄

• In order to perform voice recognition, voice must

be registered in the Phonebook data. See <Voice

Registration> (page 66). Or, to perform voice

recognition by Phone number category (Home,

Office, Mobile etc.) of Phonebook data, a key

word voice must be registered. See <Key Word

Voice Registration> (page 67).

2 Display the Outgoing Calls, Incoming

Calls, or Missed Calls screen

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

2 Display the Voice Recognition screen

3 Select from calls list

Example : Outgoing Calls screen

■ If there is only one phone number

assigned under the registered name

3 Say the name registered in the

Phonebook

Calls the selected phone number.

4 Make a call

⁄

• The Outgoing Calls list screen, Incoming Calls

list, or Missed Calls list screen shows the list of

the calls originated from or received at this unit.

They are not the ones stored in the cell-phone

memory.

When a beep is heard, say the name

within 2 seconds.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

4 Make a call

■ If there are more than one phone

numbers registered under the same

name, go to step 7.

7 Select a Phone number category

■ If there is more than one phone

number assigned under the registered

name

5 Say the key word registered for the

category

Selects the Phone number category.

8 Make a call

When a beep is heard, say the category

within 2 seconds.

6 Make a call

⁄

• A message is displayed if the voice is not

recognized. Read the message for the further

operation.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Controlling Tone-based Services

Setting Up the Hands-Free Phone

Uses tone base service using DTMF (Dual

Tone Multi Frequency).

The Hands-Free system can be set as

follows.

1 Display the Talking screen

See <Calling by Entering a Phone

Number> (page 62).

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

2 Display the DTMF input screen

2 Display the Hands Free Setup screen

3 Set each item

3 You can send tones during a call

[Auto Response] Sets an automatic

response time after call termination.

(

"OFF")

"OFF": This function can not use.

"0-99": Sets to calling ring time

(second).

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

[Call Beep] Sets the beep of the

incoming call. ( "ON")

"ON": Beep is heard.

Voice Registration

(DNX7/ DDX8 series)

Registers voice for voice recognition

in Phonebook. Up to 35 voices can be

recorded in one cell-phone.

"OFF": Beep is canceled.

[SMS Receive Beep] Sets the beep of

the incoming SMS. ( "ON")

"ON": Beep is heard.

1 Display the Phonebook Detail screen

Go through the procedure of <Calling by

Phonebook> (page 61).

"OFF": Beep is canceled.

[Phone Information Use] Sets whether

to use cell-phone phonebook, outgoing

calls list, incoming calls list and missed

calls list. ( "ON")

2 Display the voice registration screen

"ON": Yes.

"OFF": No.

[SMS Use] Sets the SMS function.

(

"ON")

"ON": Use SMS function.

"OFF": SMS not available.

[Key Word] Registers the voice to select

phone number category with voice

recognition. See <Key Word Voice

Registration> (page 67). (DNX7/ DDX8

series only)

[Record] Registers the voice for voice

recognition to the selected Phonebook.

If there are already 35 voice tag

registered in the same cell-phone,

[Record] button is deactivated.

[Echo Cancel Level] Adjust the level of

echo cancellation. ( "15")

[Play] Plays the voice registered in the

selected Phonebook data.

[Microphone Level] Adjusts the

sensitivity of the microphone for a

telephone call. ( "2")

[Delete] Deletes the voice registered in

the selected Phonebook data.

Touch to display the confirmation

screen. Touch [Yes] to delete or [No] to

cancel.

[Noise Reduction Level] Reduce the

noises generated by surrounding

environment without changing the

microphone volume. Adjust the voice of

caller when it is not clear. ( "15")

3 Say the name to register (1st try)

[Restore] Restores the Hands Free

SETUP value to the initial value.

⁄

• Either the time interval for automatic answer set

on this unit or the time interval set on the cell-

phone, whichever is shorter, takes effect.

Say within 2 seconds after the Beep.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Say the name to register (2nd try)

Say within 2 seconds after the Beep.

Key Word Voice Registration

(DNX7/ DDX8 series)

Registers the voice to select the Phone

number category by Voice Recognition.

5 End voice registration

1 Display the Hands Free Setup screen

See <Setting Up the Hands-Free Phone>

(page 65).

2 Display the Key Word List screen

⁄

• A message is displayed if the voice is not

recognized. Read the message for the further

operation.

• Repeat from 1st try if the voice is different from

the 1st try.

3 Select the Phone number category

to register

Selects the Phone number category.

"REC" turns on for data with voice for

voice recognition already registered.

[Record] Registers voice for the selected

Phone number category.

[Play] Plays voice registered for the

selected Phone number category.

[Delete] Deletes voice registered for

the selected Phone number category.

Touch to display the confirmation

screen. Touch [Yes] to delete or [No] to

cancel.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

4 Display voice registration screen

Phone Numbeer Preset

Registers frequently used phone number

to Hands Free control screen preset button.

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

5 Say the phone category to register

(1st try)

2 Select the Preset number to register

Say within 2 seconds after the Beep.

2 sec.

6 Say the phone category to register

(2nd try)

Say within 2 seconds after the Beep.

⁄

•

If no Preset number is registered, pressing

this button momentarily moves to the

step 3.

7 End voice registration

3 Select the search destination of the

number to register

⁄

• A message is displayed if the voice is not

recognized. Read the message for the further

operation.

• Repeat from 1st try if the voice is different from

the 1st try.

[

]

Registers from SMS received

message list.

Registers from SMS sent message

]

list.

[

]

Registers from Phonebook.

Registers from outgoing calls list.

Registers from incoming calls list.

Registers from missed calls list.

[Direct Number] Registers by entering

phone numbers.

[Voice] Registers voice for voice

recognition to preset number. (DNX7/

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

DDX8 series only)

3 Select a function

[Memory] Registers the currently

displayed phone number.

[Delete] Deletes the currently displayed

phone number. Touch to display the

confirmation screen. Touch [Yes] to

delete or [No] to cancel.

4 Search phone number to register

with each function

[

]

Displays the SMS Create Menu

screen. See <Create a message>.

5 Register phone number

[

]

Displays received message list.

Displays sent message list.

Displays the SMS Create Menu

screen. See <Create a message>.

The button will be active when any

message has been created after power-

on.

[Download] Retrieves SMS messages

from the cell-phone.

SMS (Shhoorrtt MMessage Service)

4 Select a message to display

Uses SMS function.

1 Display the Hands-Free Control

screen

See <Making a Call> (page 60).

2 Display the SMS Select screen

Calls the number in the selected

message.

[DISP] Displays the selected message.

[Read] Reads out the selected message.

(DNX9960 only)

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands Free Unit Control

5 SMS Message screen

2 Display the Create SMS Message

screen

[

SMS] Creates a new message for

the selected message.

3 Create a message

Create a message

1 Input the destination

Enters characters.

[2], [3] Moves the cursor.

[5], [∞] Scrolls up or down the

[

]

Select a destination from the

character button display.

phonebook.

[Shift] Toggles between uppercase and

lowercase.

[Direct Number] Enter the phone

number.

[qwe]/ [abc]/ [ALT] Sets the key layout

of the character buttons.

abc : Alphabetical key layout.

qwe : Qwerty key layout.

[SET] Display the Create SMS Message

screen.

[Send] Sends the message.

[Delete] Deletes the Draft message.

Touching the screen displays a

confirmation message. Touch [Yes]. To

cancel clearing, touch [No].

ALT : Alternate key

[Clear] Erases the entered character.

If touched more than 2 seconds, all the

input characters are erased.

⁄

[Space] Enters a space.

[SET] Determines the message and

returns to the SMS Create Menu screen.

•

This is displayed only when the Draft

message is being edited.

4 Send the message

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Control

Item

[Position]

[Surround Control]

Page

Audio Conttrrooll MMenu

Displays the Audio Control menu to set the

sound effect function of this unit.

1 Display the Source Control Screen

Audio Control

You can adjust the front/rear and right/left

audio balance.

1 Display the Audio Control screen

When a video screen is displayed, press

the [SRC] button.

Touch [

] > [

] > [Audio

Control]. (page 72)

2 Display the Audio Control menu

2 Set each item

DNX9/ DDX8 series

DNX7 series

In this manual, the above selection is

indicated as:

Touch [

] > [

3 Select the Audio Control item

Adjusts the front/back and left/right

volume around the touched area.

[2], [3] Adjusts the right and left

volume balance.

[5], [∞] Adjusts the front and rear

volume balance.

Item

Page

[Volume Offset] Finely adjust the

volume of the current source to

minimize the difference in volume

between different sources.

[Audio Control]

[Equalizer]

[EQ]

[Zone Control]

[SRS WOW]

[Space Enhancer]

⁄

•

If you have increased the volume first, then

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

reduced the volume using the "Volume

Offset", the sound generated if you suddenly

switch to another source may be extremely

loud.

⁄

•

[iPod]

During iPod source only.

[EQ] Displays the Graphic Equalizer

setup screen. (page 73)

[Subwoofer Level] Adjusts the

subwoofer volume.

The setting is available when subwoofer

is set to any item other than "None". See

<Speaker Setup> (page 94).

Graphhic Equalizeerr SSeettuupp

You can Manually set the equalizer curve.

[Bass Boost] Sets the amount of bass

boost. (DNX7 series only)

"OFF"/ "Step1"/ "Step2"

1 Display the Equalizer screen

Touch [

] > [

] > [Equalizer].

(page 72)

[Supreme] Turns ON/OFF the Supreme

function. (DNX9/ DDX8 series only)

Technology to extrapolate and

supplement with proprietary algorithm,

the high-frequency range that is cut off

when encoding.

2 Display the Graphic Equalizer screen

This function works on DVD, USB and

iPod sources.

Eqquuaalizer Control

You can set up the equalizer.

⁄

•

When "iPod" is selected in <Equalizer

Control>, the [EQ] button is deactivated.

"iPod" uses its equalizer function.

1 Display the Equalizer screen

Touch [

] > [

] > [Equalizer].

(page 72)

3 Select the channel to be adjusted

(DNX9/ DDX8 series only)

2 Select EQ curves

[Natural], [Rock], [Pops], [Easy],

[Top40], [Jazz], [Game], [iPod], [User]

Selects an equalizer curve type.

You can select any of the following

equalizer curves.

[F] Front speaker

[R] Rear speaker

[C] Center speaker

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Control

4 Set the Graphic Equalizer

DNX9/ DDX8 series

Zone Control

You can set the front and rear audio

source.

1 Display the Zone Control screen

Touch [

] > [

] > [Zone

Control]. (page 72)

2 Set the Zone Control

DNX7 series

Gain level can be adjusted by

touching the each frequency bar.

[2], [3] Sets a frequency.

[5], [∞] Sets a gain level.

[EQ Init] Returns to the previous level

which the gain level is adjusted.

[Flat] Tone curve becomes flat.

[Single Zone] Sets the unit to single

zone.

[Bass EXT] Bass Extend settings.

When turned on, the frequency lower

than 62.5 Hz is set to the same gain

level as 62.5Hz.

[Dual Zone] Sets the unit to dual zone.

[Front Source] Sets the front audio

source.

[SW Level] Adjusts the subwoofer

volume.

The setting is available when subwoofer

is set to any item other than "None". See

<Speaker Setup> (page 94).

[Rear Source] Sets the rear audio

source.

⁄

•

When the rear speaker sound is switched,

the audio source that is output at the AV

OUTPUT terminal is also switched to the

same source.

[Rear VOL.] Adjusts the volume of the

rear channel.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Listeenniinng Position

You can adjust the sound effects according

to your listening position.

⁄

• There are following limitations when zone

function is set to "ON".

- There is no output from the subwoofer or

center speaker.

1 Display the Position screen

- "Subwoofer Level", "Bass Boost", and "Supreme"

of <Audio Control> (page 72) is not available.

- <EqualizerControl>(page73),<SpaceEnhancer>

(page 75), <Listening Position> (page 75), <SRS

WOW Control> (page 76), and <Surround

Control> (page 77) are not available.

- <DSP Bypass Control> (page 93), <Speaker

Setup> (page 94), <Car Type (DTA) Setup>

(page 95), and <Channel Level> (page 97) are not

available.

Touch [

(page 72)

] > [

] > [Position].

2 Set the Position Control

Space Enhancer ((DNX7 series)

You can enhance the soundscape.

[P1] - [P3] Stores the present

adjustment setup in memory, or recalls

it from memory.

To store your adjustment in memory:

Continue to touch [P1] to [P3] more

than 2 seconds.

1 Display the Space Enhancer screen

Touch [

] > [

] > [Space

Enhancer]. (page 72)

2 Set the Space Enhancer

To call your adjustment from memory:

Touch [P1] to [P3] of your adjustment

you wish to recall from memory.

[2], [3] Sets a listening position.

You can select any of "Front R" (Right

front), "Front L" (Left front), "Front All"

(All front), "All" (All), and "User" (User)

positions.

[DTA] Displays the Position DTA (Digital

Sets the soundscape level.

Time Alignment) screen.

⁄

• You cannot set Space Enhancer in tuner source.

3 Exit Position Control

⁄

• The final distance is adjusted to the total of Car

Type Set Up value (page 95) and Position Setup

(both Position and Position DTA) value.

• If you change the Car Type Set Up value (page 95),

the position is set to "All".

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Control

• Only the adjusted distance of position setup

(Position and Position DTA values) is stored in

memory. Therefore, the final adjustment distance

changes if you change the Car Type Set Up value

(page 95).

Finely adjust the value set with the

Position function.

SRS WOW Control

(DNX9/ DDX8 series)

You can set up the SRS WOW effect.

Position DTA Control

You can fine-adjust your listening position.

1 Display the SRS WOW Control screen

1 Display the Position DTA screen

Touch [

] > [

] > [SRS WOW].

(page 72)

2 Set the SRS WOW Control

2 Select a speaker you wish to adjust

Selects SRS WOW setting.

Center speaker (DNX9/ DDX8 series)

Left front speaker

SRS WOW User Setup

1 Display the SRS WOW Adjust screen

Right front speaker

Left rear speaker

Right rear speaker

Subwoofer

[2], [3] Finely adjusts the value set with

the Position function.

2 Adjust the SRS settings

[Total DTA] Indicates setup distance.

The adjusted distance (Position and

Position DTA values), and the total

of the distance adjusted by Car Type

Set Up (page 95) and the adjustment

distance for position setup are

indicated.

Selects a speaker to be set (Front,

3 Finely adjust the distance

Rear or Center speaker).

[TruBass] Sets the TruBass effect level.

[FOCUS] Sets the FOCUS effect level.

[SRS 3D] Sets the SRS 3D effect level.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

⁄

• FOCUS: Adjusts the vertical position of the

speaker and sound image by virtual

adjustment.

• When you have selected the TV or TUNER source

and when you set the Dolby PL, we recommend

you to select the "Dolby PLII Matrix" mode. If you

select another Dolby PLII mode, the sound is

NOT output from rear speakers when you receive

monaural broadcasting sounds.

• TruBass: Assists the playback for the super bass

sound.

• SRS 3D: Makes a natural 3D sound field.

• Some items cannot be adjusted depending on

the selected speaker.

• Surround control can be set for each source.

• SRS WOW control is not available in tuner source,

TV source and HD Radio source.

• When Surround Control is Dolby Pro Logic II, SRS

WOW control is not available.

Dolby Pro Logic II Music Adjustment

1 Display the Dolby Pro Logic II Music

Adjust screen

Surround Control

(DNX9/ DDX8 series)

You can set up the sound field.

2 Adjust the sound field

1 Display the Surround Control screen

Touch [

] > [

] > [Surround

Control]. (page 72)

2 Set the Surround Control

[Dimension Control] Sets the surround

position by adjusting the front and rear

volume balance.

[Center Width Control] Sets the vocal

image position by adjusting the right

and left vocal volume level.

Sets a sound field.

You can select any of the following

sound fields.

"Bypass"/ "Bypass+Center"/ "Dolby

Pro Logic II Movie"/ "Dolby Pro Logic II

Music"/ "Dolby Pro Logic II Matrix"

[Panorama Mode] Turns the Panorama

mode On or Off.

⁄

• You cannot use the <Surround Control

Adjustment> during playback of a Multi-channel

source.

[Stream Information] Displays the

present source information.

The stream (Dolby Digital, dts, Linear

PCM, MPEG, SDDS, AAC or MP3/WMA),

input channels (front or rear channels),

and sampling frequency are displayed.

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

You can set up various receiver parameters.

Hooww ttoo DDiissppllaayy SSEETUP Meennuu SSccrreeeenn

⁄

• [AV-IN SETUP], [Navigation] and [Audio SETUP]

options can be locked. The key mark ( ) is

displayed in reverse video for the locked option.

See <Setup Memory> (page 84).

Displays the Setup menu to set various

functions.

1 Display the Source Control Screen

Item

Page

[DivX(R) SETUP]

[System]

[User Interface]

[Touch]

[Clock]

[Security]

[Angle]

When a video screen is displayed, press

the [SRC] button.

2 Display the Setup Menu Screen

[EXT SW]

[SETUP Memory]

[Display]

[Screen Control]

[Color]

[Background]

[Bluetooth SETUP]

[SIRIUS SETUP]

[DVD SETUP]

[iPod SETUP]

[USB SETUP]

[SD SETUP]

[TV SETUP]

[AV-IN SETUP]

[Navigation]

102

101

In this manual, the above selection is

indicated as:

Touch [

] > [

3 Select the setup item

[Software]

[Audio SETUP]

[Speaker Select]

[Car Type]

[Channel Level]

[AV-OUT Interface]

[Camera SETUP]

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Cancel the registration

DiivvXX SSeettuupp (DNX99/ DDX8 sseries)

Checks the registration code. This code

is needed when making a disc which has

DRM (Digital Rights Management).

1 Display the DivX Setup screen

Touch [

] > [

] > [DivX(R)

SETUP]. (page 78)

Touching the screen displays a

confirmation message. Touch [OK].

To cancel clearing, touch [Cancel].

Software Innformation

Checks the software version of this unit.

1 Display the Software Information

screen

Touch [

] > [

] > [Software].

(page 78)

Displays the registration code.

⁄

• Disabled when a DVD is being played.

• When downloading a DivX VOD file controlled by

DRM, register the code appeared on the screen

such as the one above. Otherwise the file may

not be able to play with this unit. Remaining

number of viewing is displayed when playing a

DivX VOD file with the viewing restriction. When

the remaining number of viewing reached 0, a

warning message appears and the file cannot

be played.

Displays the software version.

⁄

•

For how to update the software, refer to the

relevant update procedure manual which

comes with the software.

Deactivating DivX Code

1 Display the DivX Deactivation

Confirm screen

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

display off.

User Interrffaaccee

"CAM": Press the [AUD] button for

longer than 1 second to switch to

camera view.

You can setup user interface parameters.

1 Display the User Interface screen

Touch [

[User Interface]. (page 78)

] > [

] > [System] >

[Animation] Sets whether to display

animation. ( "ON")

2 Set each item

Laanngguuagee Setting

You can select the display language for the

control screen and audio file tags.

1 Display the User Interface screen

Touch [

] > [

] > [System] >

[User Interface]. (page 78)

2 Display the Language Setting screen

3 Select a language

[Beep] Turns the key touch tone On or

Off. ( "ON")

[Remote Sensor] Selects a remote

control signal. ( "ON")

When turned "OFF", the remote control

of TV reception is rejected.

[Language] Select the language used

for the control screen and setting items.

See <Language Setting> (page 80).

[ASR] Selects whether to use the voice

control function. (page 56) ( "Enabled")

(DNX9960 only)

Touching [Disabled] allows you to select

languages for respective items.

[Scroll] Allows scrolling of text display

on the Source Control screen.

(

"Manual")

"Auto": Scrolls the screen automatically.

"Manual": Allows you to scroll the

screen manually.

"Enabled": Voice control is activated.

"Disabled": Voice control is deactivated.

[Drawer Close] Sets whether to close

the function bar automatically.

[Select Mode] Selects the mode to

select a language. ( "Easy")

Touching [Advanced] allows you to

select languages for respective items.

(

"Auto")

[AUD Key Longer than 1 Second] Sets

the function of the [AUD] button. (page

12)

"V.OFF": Press the [AUD] button for

longer than 1 second to turn the

[Language Select] Selects a language.

(

"American English (en)")

[Enter] Determines the selected

language.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[Cancel] Cancels the selected language.

Touch Panel Adjustment

You can adjust the touch panel operations.

When [ASR] is set to "Disabled" (DNX9

only)

When [Select Mode] is set to

"Advanced"

1 Display the Touch panel Adjustment

screen

Touch [

] > [

] > [System] >

[Touch]. (page 78)

2 Adjust the Touch panel

[GUI Language Select] Selects the

display language used for the control

screen and so forth.

Follow the instruction on the screen and

(

"American English (en)")

touch the center of

[Navigation Language Select] Selects

the language used for navigation.

[Cancel] Cancels the Touch Panel Adjust.

[Reset] Resets to the initial status.

(

"American English (en)") (DNX7

series only)

[User Text Language Select] Selects

the language used for tag text (song

information).

(

"American English (en)")

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Cllock andd Date Setup

Security SSetup

You can adjust the clock time.

A red indicator will blink on the unit after

the ACC is set to OFF, warning potential

thieves.

1 Display the Clock Setup screen

Touch [

] > [

] > [System] >

1 Display the Security screen

[Clock]. (page 78)

Touch [

[Security]. (page 78)

] > [

] > [System] >

2 Setup the Clock

2 Setup the SI (Security Indicator)

Adjusts month, day, year, hours, and

minute.

[SI] Turns the SI function on or off.

If turned "ON", the security indicator on

the front panel flashes when the vehicle

ignition is off. ( "ON")

[Reset] Sets "00" minute.

Setup examples: 3:00 – 3:29 \3:00

3:30 – 3:59 \4:00

[Synchronize] Sets the clock time in

synchronization with the time data sent

from the navigation system or the RDS

station. ( DNX series: "Navigation",

DDX series: "RDS")

Moonniittor Angle Control

You can adjust the position of the monitor.

"OFF"/ "RDS"*¹/ "Navigation"

1 Display the Angle Setup screen

When the synchronized mode is set, the

clock cannot be adjusted manually.

(*¹North American sales area only)

Touch [

[Angle]. (page 78)

] > [

] > [System] >

2 Set the Monitor Angle

3 Adjust the date or clock time

Sets the Monitor angle.

[Off Position] Stores the current

monitor angle as the angle during

power off.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

[Pulse Set] Sets the Pulse signal output

time.

Outputs 500ms when "1" is set.

Increases by 200ms with each step. Up

to 100 steps can be set.

EXT SW Setup

Sets up the exteral switch power mode.

1 Display the EXT SW screen

Touch [

] > [

] > [System] >

[EXT SW]. (page 78)

How To Use the Character Entry Screen

2 Perform EXT SW Setup

Enters characters.

[2], [3] Shifts the cursor.

[5], [∞] Scrolls up or down the

character button display.

[Shift] Toggles between uppercase and

lowercase.

[qwe]/ [abc] Sets the key layout of the

character buttons.

abc : Alphabetical key layout.

qwe : Qwerty key layout.

[SW1 Name]/ [SW2 Name] Sets the

name of the external device. See <How

To Use the Character Entry Screen>

(page 83) for information on how to enter

a name.

[Clear] Clears the character.

[Space] Enters a space.

If you erase a character, locate the

cursor on it and touch this button.

[Output Pattern] Sets the power signal

output mode.

⁄

(

EXT SW1: Pulse, EXT SW2: Level)

• You can enter characters only after you have

applied the parking brake.

"Pulse": Generates a single power signal

pulse.

"Level": Continues output of high

power signal.

Sets to turn output on/off each time the

button on the EXT SW Control screen is

touched. See <External Device Power

Supply Control> (page 55).

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

[Clear] Clears the currently memorized

settings.

Setup Memory

Audio Control, AV-IN SETUP, AV Interface,

Navigation, and Audio SETUP settings can

be memorized. The memorized settings

can be recalled at any time. For example,

even when the settings are cleared due to

replacement of the battery, the settings

can be restored.

4 Memorize or recall the settings

When memorizing the Audio Setup and

AV Interface settings:

1 Display the SETUP Memory screen

If settings have already been memorized,

a confirmation message appears. Touch

[Yes]. To cancel memorization, touch

[No].

Touch [

] > [

] > [System] >

[SETUP Memory]. (page 78)

2 Start Setup Memory

When recalling the memorized

settings:

Touching the screen displays a

confirmation message. Touch [Yes]. To

cancel recalling, touch [No].

When clearing the currently

memorized settings:

[Lock] Locks the AV-IN SETUP,

Navigation, and Audio SETUP settings.

When [Lock] is selected, you cannot

change the AV-IN SETUP, Navigation,

and Audio SETUP settings.

Touching the screen displays a

confirmation message. Touch [Yes]. To

cancel clearing, touch [No].

[Yes] Memorizes or recalls the settings.

[No] To cancel the function, touch [No].

To cancel memorization, touch [No].

The SETUP Menu screen appears again.

5 Quit memorization/recalling of

settings

3 Select a desired function

[Recall] Recalls the memorized settings.

[Memory] Memorizes the current

settings.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Select the image to load

Chhaannggiinngg BBackground image

Loads an image from the connected USB

device and sets it for the background

image.

1 Connect the device which has the

image to load

2 Display the Background screen

Touch [

] > [

] > [Display] >

[Background]. (page 78)

6 Load the image

3 Change Standby

[

]

Rotates counter clockwise.

Rotates clockwise.

4 Display the Background Memory

screen

7 Select Background Change screen

8 Select an image for background

[Change] Selects an image for

background.

[Delete] Deletes the background image.

Touching the screen displays a

confirmation message. Touch [Yes]. To

cancel clearing, touch [No].

Returns to the initial background.

9 Set the image as the background

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Panel CColorr CCooorrddiinnaatte

DNX9/ DDX8 series : Sets the button

illumination color.

DNX7 series : Sets the screen and button

illumination color.

⁄

• See <About Picture files> (page 6) for readable

image specifications.

• The [Memory] button on the “Background” screen

becomes active only in STANDBY source mode.

• Pressing the [Memory] button on the

“Background” screen switches the AV OUT source

to OFF. For resetting the AV OUT source, refer to

<AV Output Interface Setup> (page 91).

1 Display the Color screen

Touch [

] > [

] > [Display] >

[Color]. (page 78)

2 Display the Panel Color Coordinate

screen

[Initialize] Initialization resets the

settings made using the Panel Color to

the default settings made at the factory.

[Panel Color Scan] When set to "ON",

the illumination color of the screen and

buttons changes one after another.

⁄

•

When touching [SET] or [Initialize], make

sure [Panel Color Scan] is set to "OFF".

3 Select a color

Sets to the touched color.

[Adjust] Sets and registers favorite color

to the preset buttons ([P1] – [P3]).

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

To register your original color

Screen Control

1 Start the RGB coordinate

You can adjust the screen mode of the

monitor.

1 Display the Screen Control screen

Touch [

] > [

] > [Display] >

[Screen Control]. (page 78)

2 Adjust each color value

2 Set each item

Selects a preset number to register.

[Red Value] Adjusts the Red value.

[Green Value] Adjusts the Green value.

[Blue Value] Adjusts the Blue value.

[Bright] Brightness Control

[Contrast] Contrast Control

[Black] Black Level Adjustment

[Dimmer] Dimmer Mode Setup

3 Select a Preset number to register

(

"ON")

"ON": The display dims.

"OFF": The display doesn’t dim.

"SYNC": Turning the Dimmer function

On or Off when the vehicle light

control switch is turned On or Off.

"NAV-SYNC": Turning the Dimmer

function On or Off according to the

Navigation Day/Night display setting.

(DNX series and DDX series with

navigation unit only)

2 sec.

Adjusted color is registered to the

selected Preset button.

4 Complete the color coordination

⁄

• In this Screen Control screen, you can perform

setups for the menu screen. Setups for videos

such as DVD can be performed on the <Screen

Control> (page 58).

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

4 Display the PIN Code Set screen

Registeerriing Bluetoooth Unit

Registers the Bluetooth unit to be

connected.

1 Display the Bluetooth Setup screen

Touch [

] > [

] > [Bluetooth

SETUP]. (page 78)

2 Display the Connect Device List

screen

Display the PIN Code.

[Search] Searches for a Bluetooth unit.

[Cancel] Cancels searching of Bluetooth

unit.

[PIN Code Set] Display the PIN Code

Set screen.

5 Enter PIN code

3 Search for a Bluetooth unit

Enters a code number.

[Enter] Enter the PIN code specified for

the Bluetooth unit to register.

This button will not be active until at

least four PIN code digits have been

entered.

Displays the registered Bluetooth

units.

When

is scrolled by touching it.

[

]

appears, the text display

[Cancel] Cancels registration of PIN

code.

[Search] Searches for a Bluetooth unit.

[SP DEV] Registers a Bluetooth unit that

cannot be registered by normal register

(paring) operation.

[Clear] Clears the code number.

6 Select the Bluetooth unit to register

⁄

•

A new device cannot be registered if there

are 5 registered Bluetooth units. Delete

unnecessary registration. See <Bluetooth

Unit Connection> (page 90).

Displays the searched Bluetooth unit.

Returns to the Connect Device List

screen.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Go through the procedure of

<Registering Bluetooth Unit> and

complete the registration (pairing)

⁄

• You can also register from the Bluetooth unit

side. For the PIN code necessary for registration,

see <Registering Bluetooth Unit PIN Code>

(page 89).

Registeerriinngg BBlluuetooootthh UUnniitt PPIIN

Code

Sets the PIN code of the Bluetooth unit to

enter when registering (pairing) from the

cell-phone or audio player side.

• If pairing cannot be done even when the

PIN code is correct, try <Registering Special

Bluetooth Unit>.

Registering Special Bluetooth Unit

Registers Special Bluetooth unit that

results in error by normal operation by

selecting from model name.

1 Display the Bluetooth Setup screen

Touch [

] > [

] > [Bluetooth

SETUP]. (page 78)

1 Display the Special Device List screen

2 Display the Receiver PIN Code screen

2 Select a model name

3 Enter PIN code

Displays the Bluetooth unit name that

can be registered.

3 Confirm whether to register

Enters a code number.

[Cancel] Cancels registration of PIN

code.

[Enter] Enters PIN code.

[Clear] Clears the code number.

⁄

•

Only models in Bluetooth unit name list can

be registered.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Bluetoooth Unit Connection

Selects the Bluetooth unit to connect.

Bluettoooth Hands-Free/AAudio

Ouuttppuutt Setup

Selects speakers to output the sound of

hands-free phoning (such as phone call

voice and ringing tone) and Bluetooth

audio.

1 Display the Bluetooth Setup screen

Touch [

] > [

] > [Bluetooth

SETUP]. (page 78)

2 Display the Connect Device List

screen

1 Display the Bluetooth Setup screen

Touch [

] > [

] > [Bluetooth

SETUP]. (page 78)

3 Select a registered Bluetooth unit

[Bluetooth HF/Audio] Sets the output

speakers. ( "Front Only")

"Front Only": Outputs from the front

speakers.

"All": Outputs from all the speakers.

4 Select the service to use

[TEL (HFP)] Connects/disconnects cell-

phone to use for Hands Free.

[Audio (A2DP)] Connects/disconnects

Audio player to use for Bluetooth Audio.

[Remove] Deletes registration (pairing).

Touching the screen displays a

confirmation message. Touch [Yes]. To

cancel clearing, touch [No].

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

AV Inpuut Setup

AV Ouuttppuut Inntterface SSeettuupp

You can set AV input parameters.

You can set AV output parameters.

1 Display the AV-IN Setup screen

1 Display the AV-OUT Interface screen

Touch [

] > [

] > [AV-IN SETUP].

Touch [

] > [

] > [AV-OUT

(page 78)

Interface]. (page 78)

2 Set each item

[AV-IN Interruption] Sets an image

display of the system that is connected

via the AV INPUT port. ( "OFF")

"OFF": When the image source is

switched, an image entered via the AV

INPUT port is displayed.

[AV-OUT] Selects an AV source to be

output at the AV OUTPUT port.

(

"OFF")

"ON": When an image signal is entered

via the AV INPUT port, this image is

displayed.

[iPod AV Interface Use] Sets the

terminal which iPod is connected.

(

"iPod")

[AV-IN1 Name], [AV-IN2 Name], [AV-IN3

Name] Sets a name to be displayed

when you select a system that is

connected via the AV INPUT port.

(

"VIDEO")

⁄

•

[iPod AV Interface Use]

This item can be set when in STANDBY source

and also the iPod is disconnected.

[AV-IN Name]

•

Two AV-IN names are displayed when "iPod" is

selected in [iPod AV Interface Use] and three are

displayed when not selected.

[AV-IN3 Name]

•

DNX9/ DDX8 series only

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

[Front Camera] Turn this setting on

when the CMOS-300 with ID2 set is

connected. ( "OFF")

Camera Setup

You can set Camera parameters.

1 Display the Camera Setup screen

[F-CAM Settings] Adjusts the CMOS-

300 with ID 2 set. For details, see the

option manual.

Touch [

] > [

] > [Camera

SETUP]. (page 78)

2 Set each item

[Rear Camera] Selects the type of rear

camera to use. ( "Other")

"CMOS-300": When the CMOS-300 with

ID 1 set is connected.

"Other": When the other camera is

connected.

[R-CAM Interruption] Sets a method

to switch to the rear view camera video

display. ( "OFF")

"ON": Switches to the rear view camera

video display when engaging the shift

knob of car to "Reverse".

"OFF": Switches to the rear view camera

video display when engaging the shift

knob of car to "Reverse" and then

pressing the [AUD] button for longer

than 1 second.

The function of the [AUD] button

needs to be set to "CAM" in [AUD Key

Longer than 1 Second] beforehand.

[R-CAM Settings] Adjusts the CMOS-

300 with ID 1 set. For details, see the

option manual.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

port.

Navigation Setup

"OFF": Must be used if no navigation

system is connected. (The navigation

display is cancelled when the AV

source is switched.)

You can set Navigation parameters.

1 Display the Navigation Setup screen

Touch [

] > [

] > [Navigation].

(page 78)

[On Screen Navigation] Sets an

on-screen display of the navigation

screen. ( "OFF") (DDX series only)

"Auto": Information is displayed for 5

seconds when updated. (Example :

when the track/file/song has changed

to the next one.)

2 Set each item

"OFF": Information is not displayed.

⁄

• [On Screen Navigation]

It can be set only when [Navigation Input] is set

to "AVIN".

[NAV Interrupt Speaker] Selects

speakers used for voice guidance of the

navigation system. ( "Front All")

"Front L": Uses the front left side

speaker for voice guidance.

DSP Bypass Control (DNX7 series)

Temporarily bypassing DSP (Digital Signal

Processor) System.

1 Display the Audio SETUP screen

"Front R": Uses the front right side

speaker for voice guidance.

"Front All": Uses both front speakers for

voice guidance.

Touch [

] > [

] > [Audio SETUP].

(page 78)

2 Set the DSP Select

[NAV Voice Volume] Adjusts the

volume for voice guidance of the

navigation system.

(

DNX series: "25", DDX series: "21")

[NAV Mute] Mutes the volume of rear

speakers during voice guidance of the

navigation system. ( "ON")

When turned "ON", the volume level

drops for voice guidance.

[Bypass] There is no effect by DSP.

[Through] There is an effect by DSP.

[Navigation Input] Selects a navigation

system connection. ( "RGB") (DDX

series only)

"RGB": Allows the Kenwood’s

Navigation System to connect via its

interface cable.

⁄

• When the mode is set to [Bypass], DSP System

cannot be adjusted.

"AV-IN": Allows a third-party navigation

system to connect via the AV INPUT1

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

"Center" None, 2-3/4x1-9/16 inch, 2 inch,

4 inch, 5 inch, 6-1/2 inch over

Speakeer Setup

You can select a speaker type and its size

to get the best sound effects.

"Front" OEM, 4 inch, 5 inch, 6-1/2 inch,

6-3/4 inch, 7 inch, 4x6, 5x7, 6x8, 6x9,

7x10

1 Display the Speaker Select screen

Touch [

] > [

] > [Audio SETUP]

"Rear" None, OEM, 4 inch, 5 inch, 6-1/2

inch, 6-3/4 inch, 7 inch, 4x6, 5x7, 6x8,

6x9, 7x10

> [Speaker Select]. (page 78)

2 Select a speaker you wish to adjust

"Subwoofer" None, 6 1/2 inch, 8 inch, 10

inch, 12 inch, 15 inch over

When the speaker type and size are

set, the speaker crossover network and

equalizer curve are set automatically.

⁄

• Select "None" if you have no speakers.

• If you set the center speaker to "None" even in

a short time when you are setting the Surround

Control to "Bypass+Center", the Surround Control

is set to "Bypass" automatically. See <Surround

Control> (page 77).

• If you set the center and rear speakers to "None"

when you are setting the Surround Control

to "Dolby PL II", the Surround Control is set to

"Bypass" automatically. See <Surround Control>

(page 77).

Center speaker (DNX9/ DDX8 series)

Front speaker

Rear speaker

Crossover Network Setup

You can set a crossover frequency of

speakers.

Subwoofer

[Tweeter] You can set the tweeter when

you are selecting front speakers.

If you are using a tweeter together with

the front speakers, set the tweeter to

"ON". In the "ON" position, the Equalizer

is adjusted to its best position.

1 Select the speaker to set the

crossover

[X'over] Displays the Speaker Crossover

Setup screen.

You can adjust the crossover setup

that was set automatically when you

selected the speaker type.

Sets the High Pass Filter of the center

speaker. (DNX9/ DDX8 series)

Sets the High Pass Filter of the front

speaker.

3 Select a speaker type

Sets the High Pass Filter of the rear

speaker.

Sets the Low Pass Filter of the

subwoofer.

You can select any of the following

speaker types.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

2 Display the Crossover setup screen

3 Set the crossover

Car Type (DDTA) Setup

You can setup the car type and speaker

network, etc.

1 Display the Car Type Setup screen

Touch [

] > [

] > [Audio SETUP]

> [Car Type]. (page 78)

2 Setup the Car Type

If your car type is selected, the Digital

Time Alignment and Equalizer is set

automatically (for timing adjustment of

sound output for each channel) to have

the highest surround effects.

[Phase] Sets the phase of subwoofer

output.

The phase is reversed 180 degrees

when set to "Reverse". (Only when

"Subwoofer" is set to any item other

than "None" in Speaker Setup)

[HPF FREQ] High Pass Filter adjustment.

(When front, center or rear speaker is

selected on Speaker Select screen)

Sets up the car type you use together

with this unit.

You can choose according to type of

your car.

"OFF", "Compact", "Full Size Car",

"Wagon", "Minivan", "SUV", "Minivan

(Long)"

[LPF FREQ] Low Pass Filter adjustment.

(When Subwoofer is selected on

Speaker Select screen)

[Slope] Sets a crossover slope.

[Location] Sets the locations of the

speakers.

[Adjust] Displays the Car Type Adjust

screen.

You can adjust the digital time

alignment that was set automatically

when you selected the car type.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Speaker Location setup

Car Type Adjust

You can manually set the sound output

timing of each channel.

1 Display the Speaker Location Setup

screen

1 Display the Car Type Adjust screen

2 Select a speaker you wish to adjust

2 Set the speaker locations

[Front Speaker] Sets the location of the

front speaker.

"Door", "On Dash", "Under Dash"

Center speaker (DNX9/ DDX8 series)

Front speaker

[Rear Speaker] Sets the location of the

rear speaker.

"Door", "Rear Deck"

Rear speaker

Subwoofer

"2nd Row", "3rd Row" (Minivan, Minivan

(Long))

3 Set a delay time

Make fine adjustment of the delay time

of the speaker output specified at <Setup

the Car Type> to have a more suitable

environment for your vehicle.

The settings of the delay time

are automatically identified and

compensated by specifying the distances

of each speaker from the center of the

vehicle interior.

1 Set the front and rear positions and

the height of the reference point to

the position of the ears of the person

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

sitting in the front seat, and set the

right and left positions to the center of

the vehicle interior.

2 Measure the distances from the

reference point to the speakers.

3 Calculate the distance difference in

accordance with the farthest speaker.

Chhaannnnel Level (DNX9/ DDX8 series)

You can set the volume at each setup

position.

1 Display the Car Type Setup screen

Touch [

] > [

] > [Audio SETUP]

> [Channel Level]. (page 78)

2 Select a speaker you wish to adjust

+3.4feet

1.6feet

2.5feet

5feet

+2.5feet

Center speaker

Left front speaker

Right front speaker

Left rear speaker

Right rear speaker

Subwoofer

+0feet

[Test Tone] Starts or stops test signal

tone output for setup check.

3 Adjust the volume

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

The operation is available during the

play stop mode.

DVD Setup

You can set up the DVD play.

[Angle Mark] Sets an angle mark

display. ( "ON")

[Screen Ratio]*¹Selects the screen

display mode. ( "16:9")

1 Display the DVD Setup screen

Touch [

(page 78)

] > [

] > [DVD SETUP].

"16:9": Displays wide pictures.

2 Set each item

"4:3 LB": Displays wide pictures in the

Letter Box format (having black stripes

at the top and bottom of screen).

"4:3 PS": Displays wide pictures in the

Pan & Scan format (showing pictures

cut at the right and left ends).

[Parental Level]*¹Displays the Parental

Lock screen. ( "OFF")

See <DVD Parental Level Setup> (page

99).

[Disc SETUP] Makes the settings related

to the disc media. See <Disc Setup>

(page 100).

[Stream Information] Displays the

present source information.

The stream (Dolby Digital, dts, Linear

PCM, MPEG, MP3, WMA or AAC) is

displayed. (DNX7 series only)

[Menu Language]*¹Selects a disc

menu language. See <DVD Language

Setup> (page 99).

[Subtitle Language]*¹Selects a subtitle

language. See <DVD Language Setup>

(page 99).

⁄

• * Disabled when a DVD is being played.

[Audio Language]*¹Selects an audio

language. See <DVD Language Setup>

(page 99).

[Dynamic Range Control]*¹Sets the

dynamic range. ( "Dialog")

The dynamic range is reduced by

changing from "Wide" to "Normal"

and from "Normal" to "Dialog". "Dialog"

makes the total sound volume becomes

larger as compared with "Wide" and

"Normal", allowing you to listen to the

movie's dialog more clearly.

This is effective only when you are using

a Dolby Digital software.

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

4 Set the language you use

DVD Languuage Setup

Selects a language you use for the speech

and menus.

1 Display the DVD Setup screen

Touch [

] > [

] > [DVD SETUP].

(page 78)

DVD Parental Level Setup

2 Select the language item to set

Sets a parental level.

1 Display the DVD Setup screen

Touch [

] > [

] > [DVD SETUP].

(page 78)

2 Display the Parental Level code

number screen

3 Enter a language code

See <DVD Language Codes> (page 115)

and select the desired language.

3 Enter the code number

Enters a language code.

[Cancel] Cancels the language setup

and returns to the "DVD SETUP" screen.

[Enter] Sets the language and returns

to the "DVD SETUP" screen. (It appears

after you have entered a language

code.)

Enters a code number.

[Cancel] Cancels the current setup and

returns to the "DVD SETUP" screen.

[Original] Sets the DVD's original

language (only when setting an audio

language).

[Level] Indicates the present parental

lock level.

[Enter] Determines the code number

and displays the Parental Level setup

screen.

[Clear] Clears the language code.

Next page 3

DDX series DDX896/ DDX8046BT

English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

[Clear] Clears the code number.

Diisscc SSetup

⁄

Performs setup when using disc media.

•

The number you enter first is set as your

code number.

1 Display the DVD Setup screen

Touch [

] > [

] > [DVD SETUP].

4 Display the Parental Level SETUP

screen

(page 78)

2 Display the Disc Setup screen

5 Select a parental level and complete

the setup

3 Set each item

Selects a parental level.

⁄

• If a disc has higher parental lock level, you need

to enter the code number.

• The parental lock level varies depending on a

loaded disc.

• If a disc has no parental lock, anybody can play it

back even when you have set the parental lock.

[CD Read] Sets a music CD playback.

(

"1")

"1": Automatically recognizes and plays

back an Audio file disc, a DVD or a

music CD.

"2": Forcibly plays back a disc as a

music CD. Select "2" if you wish to

play a music CD having a special

format or if you cannot play a disc in

the "1" position.

[On Screen DVD] Sets an on-screen

display of the DVD Playback screen.

(

"OFF")

"Auto": Information is displayed for 5

seconds when updated.

"OFF": Information is not displayed.

100

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

iPod Setup

Performs setup when using iPod.

⁄

•

[CD Read]

Disabled when a disc is in the unit.

You cannot play an Audio file/VCD disc in the

"2" position. Also, you may not play some music

CDs in the "2" position.

1 Display the iPod Setup screen

Touch [

(page 78)

] > [

] > [iPod SETUP].

2 Set each item

USB Setup

Performs setup when using USB.

1 Display the USB Setup screen

Touch [

] > [

] > [USB SETUP].

(page 78)

2 Set each item

Example : USB Setup screen

[AudioBook Speed] Sets the Audio

book playback speed. ( "Normal")

[Wide Screen] Sets Wide Screen on or

off. ( "OFF")

[On Screen iPod] Sets an on-screen

display of the iPod Playback screen.

(

"Auto")

"Auto": Information is displayed for 5

seconds when updated.

"OFF": Information is displayed when

you touch on the screen.

[Picture Display Time] Selects a picture

display time. ( "Long")

The Display of a JPEG picture is

changed. ("Short", "Middle", "Long")

⁄

[On Screen USB] Sets an on-screen

display of the USB Playback screen.

• "Wide Screen" cannot be set while the iPod is

connected.

(

"Auto")

"Auto": Information is displayed for 5

seconds when updated.

"OFF": Information is displayed when

you touch on the screen.

Next page 3

DDX series DDX896/ DDX8046BT

English

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

4 Confirm the code number

SIRIUS Parental Code Setup

Enter the same code number as you

input in step 3.

Sets a SIRIUS Parental code. (with the

optional accessory SIRIUS Tuner connected

only)

1 Display the SIRIUS Setup screen

Touch [

] > [

] > [SIRIUS

SETUP]. (page 78)

SIRIUS Parental code is now set, and the

display returns to SIRIUS Setup screen.

2 Display the Parental Code screen

Change the Parental Code

1 Display the Parental Code screen

[Clear] Clears the Parental Code.

⁄

•

If you have already completed the code

registration, [Change] is displayed.

•

Pressing [Clear] for 5 seconds or longer

deletes the code.

3 Enter the Parental Code number

2 Enter the current code number

Enters a code number.

3 Enter the new code number

4 Confirm the code number

[Cancel] Cancels the current setup and

returns to the SIRIUS Setup screen.

[Enter] Determines the code number.

[Clear] Clears the code number.

Enter the same code number as you

input in step 3.

SIRIUS Parental code is now set, and the

display returns to SIRIUS Setup screen.

102

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

6 Select a category

SIRIUS Parental Lock Setup

Selects the channel to enable SIRIUS

Parental lock function.

1 Display the SIRIUS Setup screen

Touch [

] > [

] > [SIRIUS

SETUP]. (page 78)

2 Display the Parental Code screen

Category list

Displays all the channels in the selected

category.

[All Channel] Displays all the channels.

7 Set the parental lock for each

channel

⁄

•

You need to complete <SIRIUS Parental

Code Setup> beforehand.

3 Enter the code number

Enter the same code number as you

originally input <SIRIUS Parental Code

Setup> (page 102).

Channel list

Sets the Parental lock function on or

off for each channel.

Selects a channel.

[Info Change] Switch the sequence of

the channel list. (Channel name, Song

title, Artist name, Composer name, and

Category name)

[

UP] Moves to SIRIUS Category

Select screen.

4 Display the Parental Code screen

5 Enter the code number

Next page 3

DDX series DDX896/ DDX8046BT

English

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu

Selects a channel

SIRIUSS SSkip Channel Seelecctt

[Info Change] Switch the sequence of

the channel list. (Channel name, Song

title, Artist name, Composer name, and

Category name)

Sets the undesired channels unselected.

1 Display the SIRIUS Setup screen

Touch [

] > [

] > [SIRIUS

SETUP]. (page 78)

[

UP] Moves to SIRIUS Category

Select screen.

2 Display the Skip Category Select

screen

TV Setup

The TV signal receiving areas can be set.

(with the optional accessory TV Tuner

connected only)

1 Display the TV SETUP screen

Touch [

] > [

] > [TV SETUP].

(page 78)

2 Set each item

3 Select a category

[On Screen TV] Sets an on-screen

display of the TV screen.

Category list

Displays all the channels in the selected

category.

(

"Auto") (with the optional accessory

TV tuner connected only)

"Auto": Information is displayed for 5

seconds when updated.

[All Channel] Displays all the channels.

4 Set the skip for each channel

"OFF": Information is displayed when

you touch on the screen.

Channel list

Sets the skip function on or off for

each channel.

104

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Controller

This unit can be operated using the Remote Controller supplied with this unit.

¤ CAUTION

•

Put the Remote Controller in a place where it will not move during braking or other operations. A

dangerous situation could result, if the Remote Controller falls down and gets wedged under the pedals

while driving.

•

Do not leave the battery near fire or under direct sunlight. A fire, explosion or excessive heat generation

may result.

Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause

the battery to leak fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse

with water and consult a physician.

•

Place the battery out of reach of children. In the unlikely event that a child swallows the battery,

immediately consult a physician.

Baatttery iinnssttaallllaattiioonn

Remotee CCoonntroller moddee sswwiittch

Use two "AAA"/"R03"-size batteries.

Insert the batteries with the + and – poles

aligned properly, following the illustration

inside the case.

The functions operated from the remote

controller differ depending on the position

of the mode switch.

AUD

DVD

T V

NAV

⁄

AUD mode

Switch to this mode when controlling a

selected source or tuner source, etc.

• If the Remote Controller operates only over

shorter distances or does not operate at all, it is

possible that the batteries are depleted. In such

instances, replace the both batteries with new

ones.

DVD mode

Switch to this mode when playing DVDs or

CDs etc. with the player integrated in this

unit.

Next page 3

DDX series DDX896/ DDX8046BT

English

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Controller

TV mode

Dual Zone

This is switched when controlling TV.

Switches the Dual Zone function ON and

OFF.

NAV mode

This is switched when controlling

Navigation unit.

⁄

• The position of the remote control mode switch

is indicated in the title of each mode, e.g., "(AUD

mode)".

Rear volume control

Adjusts volume at rear when the Dual Zone

• When controlling a player that is not integrated

in the unit, select "AUD" mode.

function is ON.

Common operations (AUUDD mmoode)

Source switching

Switches to the source to be played.

V.SEL

Switches to the navigation screen.

Volume control

Adjusts the volume.

Display angle

Switches the display angle each time it is

pressed.

Volume attenuator

Press the key once to lower the volume.

Press again to restore the previous volume.

Cursor key

Moves the cursor when displaying menu.

ENTER

Enters options.

106

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Hands-free communication

When a call comes in, it answers the call.

DVD/VCD (DVD moode)

Track search and file search

Selects the track or file to be played.

Function

Switches the function screen.

Play/Pause

Pauses the track.

Press again to resume playing.

MODE

Switches the screen mode.

Screen mode changes each time you press

this key.

Stop

Memorizes the last point where the disc

stopped. When pressed again, the last point

is deleted.

Direct search

Pressing this key switches the features that

can be searched directly.

DVD-VIDEO

Title number

Chapter number

Play time

Item number*

Cancel

You may not be able to use this function with

some discs or scenes.

Next page 3

DDX series DDX896/ DDX8046BT

English

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Controller

VCD 1.X, VCD 2.X (PBC OFF)

SUBTITLE

Switches the subtitle language.

Track number

Cancel

VCD 2.X (PBC ON)

Scene number

Number

ZOOM

Switches the zoom ratio each time you

press this key.

Cancel

Once you have switched to the direct

search feature, specify the search number

from the numeric keypad, and then press

[ENTER] key.

Picture Angle

Numeric keypad

Switches the picture angle each time you

press this key.

•

Specify the number to search in direct

search.

AUDIO

Press

to fast forward/

2ABC

Switches the voice language each time you

backward. Switches the fast forward/

backward speed each time you press this

key.

press this key.

•

Press

to slow forward/

5JKL

4GHI

backward. Switches the slow playback

speed each time you press this key.

DVD Top Menu

Returns to the DVD top menu.

DVD Menu

Displays the DVD menu.

Turns the playback control on or off while

playing VCD.

108

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

search feature, specify the search number

from the numeric keypad, and then press

[38] key.

Music CD/Audio file/Video file/

Picture file (AAUUDD mmoode)

Folder search

Selects the folder to be played.

Numeric keypad

•

Specify the number to search in direct

search.

Track search and file search

Selects the track or file to be played.

iPod (AUUDD moddee)

Music/Video search

Selects the music/video to be played.

Play/Pause

Pauses the track or file.

Press again to resume playing.

Play/Pause

Pauses the music/video.

Press again to resume playing.

Direct search

Pressing this key switches the features that

can be searched directly.

Music CD

Track number

Play time

Cancel

Audio files in DVD/CD disc

Folder number

File number

Cancel

Once you have switched to the direct

Next page 3

DDX series DDX896/ DDX8046BT

English

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Controller

Example: 810kHz (AM)

Radio (AUD mode)

8TUV

FM band switching

Switches to bands received by the unit.

Numeric keypad

AM band

•

To use preset tuning, press the number

of a programmed broadcast station.

(

–

)

Station selection

Switches to broadcast stations received by

the unit.

6MNO

Press the direct tuning key first, then

specify the frequency of the station to

receive.

Seek mode switching

Switches the Seek mode (AUTO1, AUTO2,

MANU).

Direct tuning

After pressing this key, use the keypad to

specify the broadcast station you wish to

receive.

Example: 92.1MHz (FM)

9WXYZ

2ABC

110

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

ROUTE M

Displays Route Option menu.

Navigation (NAV mode)

Cursor key

Scrolls the map, or moves the cursor.

VIEW

Switches between 2D and 3D map displays.

ENTER

Performs the selected function.

VOICE

Plays Voice guidance.

ZOOM

Zooms in or out the navigation map.

MAP DIR

Switches between the heading up

navigation and north up navigation map

displays.

Displays Main menu.

CANCEL

Displays previous screen.

POSITION

Displays the current position.

Next page 3

DDX series DDX896/ DDX8046BT

English

111

Download from Www.Somanuals.com. All Manuals Search And Download.

Remote Controller

TV (TV moode)

Switching Band/Video

It switches between the station of the TV

band to receive and video input.

Channel Selection

The TV channel to receive is selected.

Direct tuning

(NTSC TV type only)

Press this key first, and then specify the

station to receive with the numeric keypad.

Example: In case of Channel 6 (2-digit)

6MNO

Numeric keypad

•

The number of the memorized station is

selected. (

Press the direct tuning key first, then

specify the channel of the station to

receive.

–

)

6MNO

112

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Initial Setup

When pressing the Reset button or turning on the unit for the first time, the Initial SETUP

screen is displayed.

3 End initial setup

Initiaal Setup

1 Turns the power On

2 Set each item

⁄

• The settings above can be changed in <Setup

Menu> (page 78).

[Language] Select the language used

for the control screen and setting items.

(page 80)

[Angle] You can adjust the position of

the monitor. (page 82)

[iPod AV Interface Use] Sets the

terminal which the iPod is connected

to. ( "iPod")

[Color] Sets the screen and button

illumination color. (page 86)

[EXT SW] Setting up external switch

power mode. (page 83)

[Camera] You can set Camera

parameters. See <Camera Setup> (page

92).

DDX series DDX896/ DDX8046BT

English

113

Download from Www.Somanuals.com. All Manuals Search And Download.

Status bar Indicator items

Source

Shown below is a list of indicators

displayed on the Status bar.

Display Overview

"MUSIC" Identifies the music file.

"VIDEO" Identifies the video file.

"RDM" Indicates that the Random function is ON.

"A-RDM" Indicates that the Album random function is ON.

"REP"

"AF"

Indicates that the Repeat function is ON.

Indicates that the AF search function is ON.

"AUTO1" Indicates that Seek mode is set to Auto1.

"AUTO2" Indicates that Seek mode is set to Auto2.

"CRSC" Indicates that the CRSC function is OFF.

"MANU" Indicates that Seek mode is set to Manual.

"ST"

"TI"

Indicates that stereo broadcast is being received.

Indicates the reception state of traffic information.

(Orange: TP is being received. White: TP is not

being received.)

Source

Display Overview

"AUTO1" Indicates that Seek mode is set to Auto1.

"AUTO2" Indicates that Seek mode is set to Auto2.

"MANU" Indicates that Seek mode is set to Manual.

"ATT"

Indicates that the attenuator is active.

"DUAL" Turns on the Dual zone function.

"TEL" Indicates the connection state of the Bluetooth

"HD"

Indicates that HD Radio station is being received.

hands-free unit. (White: Connected. Orange:

Not connected.)

"FO-REP" Indicates that the Folder repeat function is ON.

"M/S" Indicates whether the reception channel is

main or sub. (Orange: Sub channel White: Main

channel)

"ANALOG" Indicates that analog broadcast is being received.

"DIGITAL" Indicates that digital broadcast is being received.

"IN"

Indicates that a disc is inserted. (White: A Disc is

inside the unit. Orange: Error at the disc player.)

"VIDEO" Identifies the video file.

"MUSIC" Identifies the music file.

"RDM" Indicates that the Random function is ON.

"REP"

"ST"

"TAG"

"SCN"

Indicates that stereo broadcast is being received.

Indicates that Tagging is enabled.

Indicates that the channel scan function is ON.

Indicates that the Repeat function is ON.

"SEEK1" Indicates that Seek mode is set to 1.

"SEEK2" Indicates that Seek mode is set to 2.

"AUTO1" Indicates that Seek mode is set to Auto1.

"AUTO2" Indicates that Seek mode is set to Auto2.

"MANU" Indicates that Seek mode is set to Manual.

"C-REP" Indicates that the Chapter repeat function is ON.

"T-REP" Indicates that the Title repeat function is ON.

"1chLL" Identifies the left audio output of channel 1.

"1chLR" Identifies the monaural audio output of channel

"1chRR" Identifies the right audio output of channel 1.

"1chST" Identifies the stereo audio output of channel 1.

"LL"

Identifies the left audio output.

"LR"

"RR"

"ST"

"PBC"

Identifies the monaural audio output.

Identifies the right audio output.

Identifies the stereo audio output.

Indicates that the PBC function is ON.

"SVCD" Identifies the Super Video CD.

"VER1" Indicates that the Video CD version is 1.

"VER2" Indicates that the Video CD version is 2.

"REP"

Indicates that the Repeat function is ON.

"FO-REP" Indicates that the Folder repeat function is ON.

"VIDEO" Identifies the video file.

"MUSIC" Identifies the music file.

"PICTURE" Identifies the image file.

"RDM" Indicates that the Random function is ON.

"REP"

Identifies that the Repeat function is ON.

"PLST" Indicates that the Play list mode is selected now.

114

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Language Codes

Code

Language

Afar

Abkhazian

Afrikaans

Amharic

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Byelorussian

Bulgarian

Bihari

Bislama

Bengali, Bangla

Tibetan

Breton

Catalan

Corsican

Czech

Welsh

Danish

German

Bhutani

Greek

English

Esperanto

Spanish

Estonian

Basque

Persian

Code

Language

Interlingue

Inupiak

Indonesian

Icelandic

Italian

Japanese

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Luxembourgish

Lingala

Code

Language

Russian

Kinyarwanda

Sanskrit

Sindhi

Sangho

Serbo-Croatian

Singhalese

Slovak

Slovenian

Samoan

Shona

Somali

Albanian

Serbian

Siswati

Sesotho

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Setswana

Tongan

Turkish

Tsonga

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Wolof

Xhosa

Yoruba

Laotian

Lithuanian

Latvian, Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Occitan

(Afan) Oromo

Oriya

Punjabi

Finnish

Fiji

Faroese

French

Frisian

gli

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hebrew

Hindi

Croatian

Hungarian

Armenian

Interlingua

Polish

Chinese

Zulu

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Kirundi

Romanian

DDX series DDX896/ DDX8046BT

English

115

Download from Www.Somanuals.com. All Manuals Search And Download.

Help? Troubleshooting

Some functions of this unit may be disabled

by some settings made on this unit.

What might seem to be a malfunction in

your unit may just be the result of slight

misoperation or miswiring. Before calling

service, first check the following table for

possible problems.

• Cannot set up the subwoofer.

• Cannot set up subwoofer phase.

• No output from the subwoofer.

• Cannot set up the low pass filter.

• Cannot set up the high pass filter.

General

✔

☞

The Touch Sensor Tone doesn’t sound.

The preout jack is being used.

The Touch Sensor Tone can’t be output from

the preout jack.

Subwoofer is not set to On.

☞ <Speaker Setup> (page 94)

The Dual zone function is enabled.

☞ <Zone Control> (page 74)

Tuner source

• Cannot select the output destination of

the subsource in the Dual zone.

• Cannot adjust the volume of the rear

speakers.

The Dual zone function is disabled.

☞ <Zone Control> (page 74)

✔

☞

Radio reception is poor.

The car antenna is not extended.

Pull the antenna out all the way.

✔

The antenna control wire is not connected.

☞

Connect the wire correctly, referring to the

section on <INSTALLATION MANUAL>.

Cannot play audio files.

"CD Read" of <Disc Setup> (page 100) is set to

"2".

Disc source

The specified disc does not play, but

another one plays instead.

The specified CD is quite dirty.

Clean the CD.

Cannot Folder select.

The Random play function is enabled.

✔

☞

✔

The disc is severely scratched.

Try another disc instead.

Cannot perform Repeat play.

The PBC function of the Video CD is

enabled.

☞

Audio file source

• Cannot set up the equalizer.

• Cannot set up the crossover network.

The sound skips when an Audio file is

being played.

The Dual zone function is enabled.

☞ <Zone Control> (page 74)

✔

The media is scratched or dirty.

☞

Clean the media, referring to the CD

cleaning of the section on <Handling discs>

(page 4).

The DSP Select is Bypass.

☞ <DSP Bypass Control> (page 93)

✔

The recording condition is bad.

☞

Record the media again or use another

media.

116

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Help? Error

"Error 07–67" :

The unit is not operating correctly due to

some reason or other.

➡ Push the unit's Reset button. If the "Error

07−67" message does not disappear, see

your nearest Kenwood dealer.

When the unit fails to operate correctly,

the cause of the failure appears on the

display.

"Protect" :

Protective circuit has been activated because

a speaker cord has shorted or it has come in

contact with the car chassis.

➡ Wire or insulate the speaker cord as

appropriate and then push the Reset

button.

"No Device" (USB device):

The USB device is selected as a source

although no USB device is connected.

➡ Change the source to any source other

than USB/iPod. Connect an USB device, and

change the source to USB again.

"Hot Error" :

When the internal temperature of this unit

rises to 60°C or more, the protection circuit is

activated and you may not be able to operate

the unit. At such times this message will

appear.

"Disconnected" (iPod, Bluetooth audio

player):

The iPod/Bluetooth audio player is selected

as a source although no iPod/Bluetooth audio

player is connected.

➡ Change the source to any source other than

iPod/Bluetooth. Connect an iPod/Bluetooth

audio player, and change the source to

iPod/Bluetooth again.

➡ Use the unit again after reducing the

temperature inside the vehicle.

"Mecha Error" :

The disc player is malfunctioning.

➡ Eject the disc and try inserting it again.

Contact the Kenwood dealer if this indicator

continues blinking or the disc cannot be

ejected.

"No Music" :

The connected USB device contains no

playable audio file.

Media was played that doesn’t have data

recorded that the unit can play.

"Disc Error" :

An unplayable disc is inserted.

"USB Device Error!!" :

The connected USB device is rated a current

capacity higher than the allowable limit.

➡ Check the USB device.

Some trouble may have occurred to the

connected USB device.

"Read Error" :

Disc is quite dirty.

➡ Clean the disc, referring tot he section on

<Handling discs> (page 4).

Disc is upside down.

➡ Change the source to any source other than

USB. Remove the USB device.

➡ Load the disc with the labeled side up.

"Region code Error" :

The disc you wanted to play has a region code

that cannot be played with this unit.

"Authorization Error" :

Connection to the iPod has failed.

➡ Remove the iPod and then reconnect it.

The unit does not support the iPod.

➡ Refer to <iPod/iPhone that can be

connected to this unit> (page 7).

"Parental level Error" :

The disc you wanted to play has a higher level

than the parental level you set.

Next page 3

DDX series DDX896/ DDX8046BT

English

117

Download from Www.Somanuals.com. All Manuals Search And Download.

Help? Error

"Update your iPod" :

The iPod's software is an older version which

the unit can not support.

➡ Confirm that the software for the iPod is the

latest version. Refer to <iPod/iPhone that

can be connected to this unit> (page 7).

"FIRMWARE UPDATING" :

Updating the firmware of SIRIUS tuner.

➡ Operation is invalid until the update is

completed.

"CHANNELS UPDATING **% COMPLETE" :

Updating the SIRIUS Channel Map.

➡ Operation is invalid until the update is

completed.

"You only can connect one iPod." :

More than one iPod are connected to this unit.

➡ Connect only one iPod to the USB terminal

with iPod tag.

"SUBSCRIPTION UPDATED" :

Updating the subscription information.

➡ Operation is invalid until the update is

completed.

"Update your USB database" :

The USB device is different from the previous

one or the contained audio files are replaced.

➡ Update your database. Refer to <Source

Control Screen> (page 26) of USB Device

Control.

"INVALID CHANNEL" :

The selected channel is invalid.

➡ Select a different channel.

"CALL 888-539-SIRIUS TO SUBSCRIBE" :

The selected channel is not subscribed.

➡ Call the displayed number for subscription.

"Navigation Error. Please turn on power

again later." (DNX series only) :

The communication error has occurred due to

severely cold temperature.

➡ Turn on power again after warming your car

interior.

"Check XM Tuner" :

The unit cannot recognize the connected XM

Tuner.

➡ Check the connection of the XM Tuner.

"No Navigation" (DDX series only):

This unit does not support the connected

navigation unit.

➡ The latest information on the connectable

navigation unit can be obtained from

http://www.kenwood.com/cs/ce.

No navigation unit is connected.

➡ Connect a supported navigation unit.

"No Signal" :

The unit cannot receive any signal.

➡ Check the connection of the antenna.

"Check Antenna" :

Something is wrong with the antenna.

➡ Check the connection of the antenna.

"CHECK SIRIUS" :

The unit cannot recognize the connected

SIRIUS Tuner Box.

➡ Check the connection of the SIRIUS Tuner

Box.

"Ch Unavailable" :

The selected channel is invalid.

➡ Select a different channel.

"Ch Unauthorized" :

The selected channel is not subscribed.

"ANTENNA ERROR" :

Something is wrong with the antenna.

➡ Check the connection of the antenna.

"Channel Off Air" :

The broadcast of the selected channel has

finished.

"ACQUIRING SIGNAL" :

The unit cannot receive any signal.

➡ Move the vehicle to the area where the unit

can receive signal.

118

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Disc Format

: DVD-Video/ VIDEO-CD/ CD-DA

Moonniittor section

Picture Size

: 6.95 inches (diagonal) wide

: 156.6 mm (W) x 81.6 mm (H)

Sampling Frequency

: 44.1/ 48/ 96 kHz

Quantifying Bit Number

: 16/ 20/ 24 bit

Display System

: Transparent TN LCD panel

Drive System

: TFT active matrix system

USB inteerrfface section

Number of Pixels

: 1,152,000 (800H x 480V x RGB)

USB Standard

: USB 2.0 High speed

iPod: USB 1.1 Full speed (DNX9/ DDX8 series

only)

Effective Pixels

: 99.99 %

Pixel Arrangement

: RGB striped arrangement

File System

: FAT 16/ 32

Back Lighting

: LED

Maximum Power Supply Current

: 500 mA

D/A Converter

: 24 Bit

DVD player section

Video Decoder

: MPEG1/ MPEG2/ MPEG4/ H.264/ WMV

D/A Converter

: 24 bit

Audio Decoder

: MP3/ WMA/ AAC/ WAV (Linear PCM)

Audio Decoder

: Linear PCM/ Dolby Digital/ dts/ MP3/ WMA/

AAC

Bluetoooth section

Video Decoder

: MPEG1/ MPEG2

: DivX (DNX9/ DDX8 series)

Technology

: Bluetooth Ver.2.1 + EDR Certified

Wow & Flutter

: Below Measurable Limit

Frequency

: 2.402 – 2.480 GHz

Frequency Response

DNX9/ DDX8 series

Output Power

: +4dBm (MAX), 0dBm (AVE), Power Class2

Sampling frequency;

96 kHz : 20 – 22,000 Hz

48 kHz : 20 – 22,000 Hz

44.1 kHz : 20 – 20,000 Hz

DNX7 series

Sampling frequency;

96 kHz : 20 – 20,000 Hz

48 kHz : 20 – 20,000 Hz

44.1 kHz : 20 – 20,000 Hz

Maximum Communication range

: Line of sight approx. 10m (32.8 ft)

Profile

HFP (Hands Free Profile),

SPP (Serial Port Profile),

HSP (Headset Profile),

OPP (Object Push Profile),

PBAP (Phonebook Access Profile),

SYNC (Synchronization Profile),

A2DP (Advanced Audio Distribution Profile),

AVRCP (Audio/Video Remote Control Profile)

Total Harmonic Distortion

: 0.008 % (1 kHz)

S/N Ratio (dB)

: 98 dB (DVD-Video 96 kHz)

Dynamic Range

: 98 dB (DVD-Video 96 kHz)

Next page 3

DDX series DDX896/ DDX8046BT

English

119

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

FM tuner section

Video section

Frequency Range

Color System of External Video Input

: NTSC

200 kHz : 87.9 MHz – 107.9 MHz (DNX9960/

DNX7160/ DNX7020EX/ DDX896)

50 kHz : 87.5 MHz – 108.0 MHz (DDX8046BT)

External Video Input Level (mini jack)

: 1 Vp-p/ 75 Ω

Usable Sensitivity (S/N : 30 dB)

: 9.3 dBf (0.8 μV/ 75 Ω)

External Audio Max Input Level (mini jack)

: 2 V/ 25 kΩ

Quieting Sensitivity (S/N : 50 dB)

: 15.2 dBf (1.6 μV/ 75 Ω)

Video Output Level (RCA jacks)

: 1 Vp-p/ 75 Ω

Frequency Response ( 3.0 dB)

: 30 Hz – 15 kHz

Audio Output Level (RCA jacks)

: 1.2 V/ 10 kΩ

S/N Ratio (dB)

: 70 dB (MONO)

Analog RGB input (DDX series only)

: 0.7 Vp-p/ 75 Ω

Selectivity ( 400 kHz)

: ≥ 80 dB

Audio section

Stereo Separation

: 35 dB (1 kHz)

Maximum Power (Front & Rear)

: 50 W x 4

Full Bandwidth Power (Front & Rear)

(4 Ω, 14.4 V, 1 % THD)

: 22 W x 4

AM tuner section

Frequency Range (10 kHz)

: 530 kHz – 1700 kHz

Preout Level (V)

Usable Sensitivity

: 28 dBμ

: 5 V/ 10 kΩ (DNX9/ DDX8 series)

: 2 V/ 10 kΩ (DNX7 series)

Preout Impedance

: 80 Ω (DNX9/ DDX8 series)

: ≤ 600 Ω (DNX7 series)

Speaker Impedance

: 4 – 8 Ω

120

DNX series DNX9960/ DNX7160/ DNX7020EX

Download from Www.Somanuals.com. All Manuals Search And Download.

DSP Section

Navigation section (DNX series

only)

Graphics equalizer

DNX9/ DDX8 series

Band: 13 Band

Receiver

: High-sensitivity GPS receiver

Frequency (BAND1 – 13)

: 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/

2.5k/ 4k/ 6.3k/ 10k/ 16k Hz

Channel: Front/ Rear/ Center

DNX7 series

Band: 5 Band

Frequency (BAND1 – 5)

: 62.5/ 250/ 1k/ 4k/ 16k Hz

Reception Frequency

: 1575.42 MHz (C/A code)

Acquisition Times

Cold : < 38 seconds

Factory Reset : < 45 seconds

(On average for a stationary receiver with a

clear view of the sky)

Accuracy

Position : < 10 meters typical

Velocity : 0.05 m/sec. RMS

Gain

: -9/ -8/ -7/ -6/ -5/ -4/ -3/ -2/ -1/ 0/ 1/ 2/ 3/ 4/

5/ 6/ 7/ 8/ 9 dB

Position Method

: GPS

X'over

High pass filter

Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/

90/ 100/ 120/ 150/ 180/ 220/

250 Hz

Antenna

: External GPS antenna

Slope: -6/ -12/ -18/ -24 dB

Low pass filter

Frequency: 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/

120/ 150/ 180/ 220/ 250 Hz,

Through

Exteerrnal SW

Maximum Power Supply Current

: 500 mA

Slope: -6/ -12/ -18/ -24 dB

General

Time alignment

Front/ Rear/ Subwoofer

: 0 – 20.01 ft (0.07 ft Step)

Center: 0 – 11.15 ft (0.07 ft Step)

(DNX9/ DDX8 series)

Operating voltage

: 14.4 V (10.5 – 16 V allowable)

Maximum Current Consumption

: 15 A

Position

: 0 – 5.68 ft (0.07 ft Step)

Dimensions (W × H × D)

: 181.7 × 100.0 × 180 mm

7-3/16 x 3-15/16 x 7-1/8 inch

Channel Level (DNX9/ DDX8 series)

Front/ Rear/ Center : 10 dB

Subwoofer : -50 – +10 dB

Operational Temperature Range

: -10 °C – +60 °C

Subwoofer level (DNX7 series)

: -50 – +10 dB

Storage Temperature Range

: -20 °C – +85 °C

Weight

DNX9 series : 2.54 kg (5.6 lbs)

DNX7 series : 2.50 kg (5.5 lbs)

DDX series : 2.48 kg (5.5 lbs)

Although the effective pixels for the liquid crystal

panel is given as 99.99% or more, 0.01% of pixels

may not light or may light incorrectly.

Specifications subject to change without notice.

DDX series DDX896/ DDX8046BT

English

121

Download from Www.Somanuals.com. All Manuals Search And Download.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Kenwood

Corporation is under license. Other trademarks and trade names are those of their respective owners.

The "AAC" logo is a trademark of Dolby Laboratories.

iPod is a trademark of Apple Inc., registered in the U.S. and other countries.

iPhone is a trademark of Apple Inc.

iTunes is a trademark of Apple Inc.

“Made for iPod”means that an electronic accessory has been designed to connect specifically to iPod and has

been certified by the developer to meet Apple performance standards.

“Works with iPhone”means that an electronic accessory has been designed to connect specifically to iPhone

and has been certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other

countries.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual

property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended

for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering

or disassembly is prohibited.

HD Radio™ and the HD Radio Ready logo are proprietary trademarks of iBiquity Digital Corporation.

DNX9960/ DDX896/ DDX8046BT:

ABOUT DIVX VIDEO:

DivX® is a digital video format created by DivX, Inc. This is an official DivX Certified device that

plays DivX video. Visit www.divx.com for more information and software tools to convert your files

into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND:

This DivX Certified® device must be registered in order to play DivX Video-on-Demand (VOD)

content. To generate the registration code, locate the DivX VOD section in the device setup menu.

Go to vod.divx.com with this code to complete the registration process and learn more about

DivX VOD.

DivX®, DivX Certified® and associated logos are registered trademarks of DivX, Inc. and are used under license.

is a trademark of SRS Labs, Inc.

WOW technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories.

Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S.

and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround

DNX7160/ DNX7020EX:

Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S.

and worldwide patents issued & pending. DTS and the Symbol are registered trademarks & DTS 2.0 Channel and

Download from Www.Somanuals.com. All Manuals Search And Download.

FCC WARNING

DNX9960/ DNX7160/ DNX7020EX/ DDX896:

This equipment may generate or use radio

frequency energy. Changes or modifications to this

equipment may cause harmful interference unless

the modifications are expressly approved in the

instruction manual. The user could lose the authority to

operate this equipment if an unauthorized change or

modification is made.

2CAUTION

Use of controls or adjustments or performance of

procedures other than those specified herein may

result in hazardous radiation exposure.

In compliance with Federal Regulations, following

are reproductions of labels on, or inside the product

relating to laser product safety.

NOTE

This equipment has been tested and found to

Kenwood Corporation

2967-3, ISHIKAWA-MACHI,

HACHIOJI-SHI

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment may cause harmful interference to

radio communications, if it is not installed and used

in accordance with the instructions. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

TOKYO, JAPAN

KENWOOD CORP. CERTIFIES THIS EQUIPMENT

CONFORMS TO DHHS REGULATIONS N0.21 CFR

1040. 10, CHAPTER 1, SUBCHAPTER J.

Location : Bottom Panel

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

DDX8046BT:

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

The marking of products using lasers

• Consult the dealer or an experienced radio/TV

technician for help.

CLASS 1

LASER PRODUCT

DNX9960/ DNX7160/ DNX7020EX/ DDX896:

IC (Industry Canada) Notice

Operation is subject to the following two

conditions:

The label is attached to the chassis/case and

says that the component uses laser beams that

have been classified as Class 1. It means that the

unit is utilizing laser beams that are of a weaker

class. There is no danger of hazardous radiation

outside the unit.

(1) This device may not cause interference, and

(2) this device must accept any interference,

including interference that may cause

undesired operation of the device.

The term "IC: " before the certification/

registration number only signifies that the

Industry Canada technical specification were

met.

This product contains a CR Coin Cell Lithium

Battery which contains Perchlorate Material

– special handling may apply. See www.dtsc.

ca.gov/hazardouswaste/perchlorate

Download from Www.Somanuals.com. All Manuals Search And Download.

This symbol mark indicates that

Kenwood manufactured this

product so as to decrease harmful

inﬂuence on the environment.

Download from Www.Somanuals.com. All Manuals Search And Download.

Infinity Speaker System 6 Piece Home Theater System User Manual
Ingersoll Rand Impact Driver ETW E180 User Manual
Intel Computer Hardware PCM 6892 RevB User Manual
Jackson Indoor Furnishings Scaltrol User Manual
Kenmore Washer Accessories 7964147 User Manual
Kenwood Marine Radio TS 820S User Manual
Kenwood Universal Remote RC R0507 User Manual
KitchenAid Ice Maker KUIS18NNTB1 User Manual
KitchenAid Stereo System kmc4241 User Manual
Kompernass Hot Beverage Maker KH 1027 User Manual