Kenmore Washer Accessories 7964147 User Manual

Use & Care Guide

Manual de Uso y Cuidado

high

ency

Para obtener los mejores resultados, deberá

utilizarse un detergente HE para lavadoras de

English / Español

alta

baja espuma.

Model/Modelo: 796.4147#

Kenmore Elite

Front-Loading

Automatic Washer

Lavadora automática de carga frontal

# = color number, numero de color

P/N MFL67360428

Sears Brand Management Corporation

Hoﬀman Estates, IL 60179 U.S.A.

www.kenmore.com

www.sears.com

Download from Www.Somanuals.com. All Manuals Search And Download.

SAFETY MESSAGES

There are many important safety messages in this manual and on your appliance. Always read and obey

all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can result in property

damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word DANGER or WARNING.

These words mean:

Indicates a hazardous situation which, if not avoided, will result in death or serious

injury.

Indicates a hazardous situation which, if not avoided, could result in death or serious

injury.

All safety messages will tell you what the potential hazard is, tell you how to

reduce the chance of injury, and tell you what can happen if the instructions are

not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

•Do not install or store the washer where it will be

exposed to the weather or freezing temperatures.

To reduce the risk of ﬁre, electric shock, or injury to

persons when using this appliance, follow basic

precautions, including the following.

•Do not tamper with controls.

•Before use, the washer must be properly installed as

described in this manual.

•Do not repair or replace any part of the washer or

attempt any servicing other than as described in this

manual. We strongly recommend that any service be

performed by a qualiﬁed technician.

•Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry

cleaning solvents, or other ﬂammable or explosive

substances, as they give oﬀ vapors that could

ignite or explode.

•See Installation Instructions for grounding requirements.

•ALWAYS follow the fabric care instructions supplied by

the garment manufacturer.

•Do not add gasoline, dry cleaning solvents, or other

ﬂammable or explosive substances to the wash water.

These substances give oﬀ vapors that could ignite

or explode.

•Do not place items exposed to cooking oil in your

washer. Items contaminated with cooking oils may

contribute to a chemical reaction that could cause a

load to catch ﬁre.

•Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been

used for two weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used

for such a period, before using the washer, turn ON

all hot water faucets and let the water ﬂow from each

for several minutes. This will release any accumulated

hydrogen gas. As the gas is ﬂammable, do not smoke

or use an open ﬂame during this time.

•Use fabric softeners or products to eliminate static only

as recommended by the manufacturer.

•This washer is not designed for maritime use or for

mobile installations such as in RVs, aircraft, etc.

•Turn OFF the water faucets and unplug the washer if

the machine is to be left for an extended period of

time, such as during vacations.

•Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is

used near children.

•Packaging material can be dangerous for children.

There is a risk of suﬀocation. Keep all packaging

from children.

•Before the washer is removed from service or

discarded, remove the door to prevent children from

climbing inside.

•Always check the inside of the washer for foreign

objects before loading laundry. Keep the door closed

when not in use.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

appliance from the power supply. Failure to follow this

warning can cause serious injury, ﬁre, electric shock,

or death.

To reduce the risk of ﬁre, electric shock, or injury to

persons when using this appliance, follow basic

precautions, including the following.

•Do not combine detergents, fabric softeners, and/or

other laundry products from diﬀerent manufacturers

for use in a load, unless speciﬁed on the fabric label.

•Unplug the washer before cleaning to avoid the risk of

electric shock.

•Never use harsh chemicals, abrasive cleaners, or

solvents to clean the washer. They will damage

the ﬁnish.

•Do not put oily or greasy rags or clothing on top of

the washer. These substances give oﬀ vapors that

could ignite the materials.

•Do not wash items that are soiled with vegetable or

cooking oil. These items may contain some oil after

laundering and may catch ﬁre.

•Disconnect this appliance from the power supply

before attempting any user maintenance. Turning the

controls to the OFF position does not disconnect this

•Do not mix chlorine bleach with ammonia or acids

such as vinegar. Follow package directions when

using laundry products. Incorrect usage can produce

poisonous gas, resulting in serious injury or death.

•Do not reach into the washer while parts are moving.

Before loading, unloading, or adding items, push in the

cycle selector knob and allow the drum to coast to a

complete stop before reaching inside. Failure to follow

this warning can cause serious injury, ﬁre, electric shock

or death.

WARNING

•The washer should always be plugged into its own

•Refer to INSTALLATION INSTRUCTIONS for detailed

grounding procedures. Installation instructions are

packed in the washer for the installer’s reference. If the

washer is moved to a new location, have it checked

and reinstalled by a qualiﬁed service technician. Failure

to follow this warning can cause serious injury, ﬁre,

electric shock, or death.

•Do not, under any circumstances, cut or remove the

third (ground) prong from the power cord. Failure to

follow this warning can cause serious injury, ﬁre, electric

shock, or death.

•For personal safety, this appliance must be properly

grounded. Failure to follow this warning can cause

serious injury, ﬁre, electric shock, or death.

•The power cord of this appliance is equipped with a

3-prong (grounding) plug which mates with a standard

3-prong (grounding) wall outlet to minimize the possibility

of electric shock hazard from this appliance.

•This washer must be plugged into a 120VAC, 60Hz

grounded outlet. Failure to follow this warning can

cause serious injury, ﬁre, electric shock, or death.

•Have the wall outlet and circuit checked by a

qualiﬁed electrician to make sure the outlet is properly

grounded. Failure to follow this warning can cause

serious injury, ﬁre, electric shock, or death.

•Where a standard 2-prong wall outlet is encountered,

it is your personal responsibility and obligation to

have it replaced with a properly grounded 3-prong

wall outlet. Failure to follow this warning can cause

serious injury, ﬁre, electric shock, or death.

•Do not install on carpet. Install the washer on a solid

ﬂoor. Failure to follow this warning can cause serious

leak damage.

individual electrical outlet which has a voltage rating

that matches the rating plate. This provides the best

performance and also prevents overloading house

wiring circuits which could cause a ﬁre hazard from

overheated wires.

•Never unplug your washer by pulling on the power

cord. Always grip plug ﬁrmly and pull straight out

from the outlet. Failure to follow this warning can

cause serious injury, ﬁre, electric shock, or death.

•Immediately repair or replace all power cords that

have become frayed or otherwise damaged. Do not

use a cord that shows cracks or abrasion damage

along its length or at either end. Consult with a

qualiﬁed service technician. Failure to follow this

warning can cause serious injury, ﬁre, electric shock,

or death.

•When installing or moving the washer, be careful not

to pinch, crush, or damage the power cord. Failure

to follow this warning can cause serious injury, ﬁre,

electric shock, or death.

•The washer must be installed and electrically

grounded by a qualiﬁed service technician in

accordance with local codes to prevent shock hazard

and assure stability during operation.

•The washer is heavy. Two or more people may be

needed to install and move the appliance. Failure

to do so can result in damage to property or serious

bodily injury.

•Store and install the washer where it will not be

exposed to temperatures below freezing or exposed

to outdoor weather conditions. Failure to follow this

warning can cause serious leak damage.

•To reduce the risk of electric shock, do not install

the washer in humid spaces. Failure to follow this

warning can cause serious injury, ﬁre, electric shock, or

death.

•Do not remove grounding prong. Do not use an

adapter or extension cord. Plug into a grounded

3-prong outlet. Failure to follow these warnings can

cause serious injury, ﬁre, electric shock, or death.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

WARNING: RISK TO CHILDREN

•Keep laundry products out of children’s reach. To

•Do not allow children to play on or in the washer. Close

supervision of children is necessary when the washer is

used near children. As children grow, teach them the

proper, safe use of all appliances. Failure to comply with

these warnings could result in serious personal injury.

prevent personal injury, observe all warnings on

product labels. Failure to comply with these warnings

could result in serious personal injury.

•Before your washer is removed from service or

discarded, remove the door to the washing compartment

to avoid the danger of children or small animals

getting trapped inside. Failure to do so can result in

serious personal injury or death.

•Destroy the carton, plastic bag, and other packing

materials after the washer is unpacked. Children

might use them for play. Cartons covered with rugs,

bedspreads, or plastic sheets can become airtight

chambers. Failure to comply with these warnings could

result in serious personal injury.

GROUNDING REQUIREMENTS

IMPORTANT: Please read carefully.

TO CONNECT ELECTRICITY

GROUNDING INSTRUCTIONS

This appliance must be grounded. In the event of

malfunction or breakdown, grounding will reduce the

risk of electric shock by providing a path of least

resistance for electric current. This appliance is equipped

with a cord having an equipment-grounding conductor

and grounding plug. The plug must be plugged into

an appropriate outlet that is properly installed and

grounded in accordance with all local codes

and ordinances.

WARNING

Improper connection of the equipment-grounding

conductor can result in risk of electric shock. Check

with a qualiﬁed electrician or service technician

if you are in doubt as to whether the appliance

is properly grounded. Do not modify the plug

provided with the appliance. If it does not ﬁt the

outlet, have a proper outlet installed by a qualiﬁed

electrician. Failure to follow these warnings can

cause serious injury, ﬁre, electric shock, or death.

3-prong

grounding type

wall receptacle

Ensure proper

ground exists

before use.

3-prong

grounding

plug

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES AND BENEFITS

KEY PARTS AND COMPONENTS

DETERGENT DISPENSER

There are four compartments. One each for prewash,

main wash, liquid bleach, and liquid fabric softener.

CONTROL PANEL

The easy-to-read LED display shows cycle options,

settings, cycle status, and estimated time remaining during

operation.

NOTE: Sensors in the washer automatically detect the

size of the wash load to optimize washing time, based

on the selected cycle and options.

DIRECT-DRIVE MOTOR

The direct-drive motor provides improved performance

and reliability while increasing energy eﬃciency.

(Motor is not visible.)

LARGE-CAPACITY STAINLESS STEEL DRUM

The ultra-large stainless steel drum oﬀers extreme

durability and is tilted to improve eﬃciency and allow

easier access for large items.

EASY-ACCESS LOCKING DOOR

The extra-large door locks during operation. The door

will not open until it is safe to do so.

Cold and Hot Water Inlets

Power

Cord

F FILTER ACCESS PANEL

Provides easy access to the drain pump ﬁlter, which allows

you to clean the ﬁlter or retrieve lost items without a

service call.

Drain

Hose

LEVELING FEET

Four leveling feet (two in the front and two in the back)

adjust to improve washer stability on uneven ﬂoors. Feet

are adjusted and locked in place using the adjusting

wrench included with the washer.

HIGH-EFFICIENCY STEAM CYCLES

During high-eﬃciency steam cycles, hot steam interacts

with fabrics to help remove tough stains.

DOOR MAGNET

Safely and conveniently keeps the door ajar with the door

magnet. There are two door closed positions, fully closed

and slightly ajar. In the latter position, the door is only closed

to the door magnet to keep the door slightly open when the

washer isn’t in use. This will promote air circulation and allow

the interior of the machine to dry. To use this feature, close

the door just until it contacts the door magnet.

Rear of Washer

Shipping Bolts/Retainers (4)

NOTE: Bolts/Retainers MUST be removed prior to

operation. Keep for future use.

Included Accessories

Optional Accessories

Drain Hose Extension

Pedestal

Stacking kit (For dryer)

Hot and Cold

Water Hoses

Non-skid pads

Caps (4)

(for covering

shipping bolt holes)

P/N 5215ER2002K

D26 17002 (White)

D26 17008 (Ginger)

D26 17009 (Chili pepper)

WDP3RW (White)

WDP3R (Wild Cherry Red)

WDP3R (Platinum)

Wrench (for removing

shipping bolts and

adjusting and

Tie Strap

(for securing

drain hose

Elbow Bracket

(for securing

drain hose

locking leveling feet)

Wrench appearance may vary.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION REQUIREMENTS

KEY DIMENSIONS AND SPECIFICATIONS

Description

Rated Voltage/Frequency

Dimensions

Front-Loading Washer

120VAC, 60Hz

26 ¼ in. (W) X 30 ⅓ in. (D) X 38 ¹⁵/16 in. (H), 54 ⅜ in. (D, door open)

66.8 cm (W) X 76.8 cm (D) X 98.5 cm (H), 138.1 cm (D, door open)

Net Weight

215.8 lbs (97.9 Kg)

CHOOSE THE PROPER LOCATION

CLEARANCES

WARNING

•This washer is heavy. Two or more people are

required when moving and unpacking the washer.

Failure to do so may result in damage to property or

serious bodily harm.

24¹/⁸"

(61.3 cm )

•Store and install the washer where it will not be

exposed to temperatures below freezing or exposed

to outdoor weather conditions. Failure to follow this

warning can cause serious injury, ﬁre, electric shock,

or death.

•Properly ground washer to conform with all electric

governing codes and ordinances. Failure to follow this

warning can cause serious injury, ﬁre, electric shock, or

death.

•To reduce the risk of electric shock, do not install the

washer in humid spaces. Failure to follow this warning

can cause serious injury, ﬁre, electric shock, or death.

•To ensure proper air ﬂow, do not block the large

opening on the bottom of the washer with carpeting

or other materials.

•Do not remove ground prong. Do not use an adapter

or extension cord. Plug into a grounded 3-prong

outlet. Failure to follow this warning can cause serious

injury, ﬁre, electric shock, or death.

30¹/3"

(10 cm )

(76.8 cm )

54³/⁸"

(138.1 cm )

To ensure suﬃcient clearance for water lines and airﬂow,

allow minimum clearances of at least 1 in. (2.5 cm) at the

sides and 4 in. (10 cm) behind the unit. Be sure to allow

for wall, door, or ﬂoor moldings that may increase the

required clearances.

Power Outlet

•The power outlet must be within 60 in. (1.5 m) of either

side of the washer.

•The appliance and outlet must be positioned so that

the plug is easily accessible.

•Do not overload the outlet with more than

one appliance.

•The outlet must be grounded in accordance with

current wiring electric codes and regulations.

• Time-delay fuse or circuit breaker is recommended.

26¹/4"

(66.8 cm )

(2.5 cm )

NOTE: It is the personal responsibility and obligation of

the product owner to have a proper outlet installed by a

qualiﬁed service technician.

Allow at least 21 ¼ in. (54 cm) in front of

the washer to open the door.

FLOORING

•To minimize noise and vibration, the washer MUST be

installed on a solidly constructed ﬂoor. See the NOTE

to your right.

•Allowable slope under the entire washer is a maximum

1 in. diﬀerence from side to side or from front to back.

•Installing on carpeting and soft tile surfaces is

not recommended.

•Never install the washer on a platform or weakly

supported structure.

NOTE: The ﬂoor must be strong and rigid enough to

support the weight of the washer, when fully loaded,

without ﬂexing or bouncing. If your ﬂoor has too much

ﬂex, you may need to reinforce it to make it more rigid.

A ﬂoor that is adequate for a top-loading washer may

not be rigid enough for a front loading washer, due to

the diﬀerence in the spin speed and direction. If the

ﬂoor is not solid, your washer may vibrate and you may

hear and feel the vibration throughout your house.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

UNPACKING AND REMOVING SHIPPING BOLTS

When removing the washer from the carton base, be sure

to remove the foam drum support in the middle of the

carton base. See drawing below.

If you must lay the washer down to remove the base

packaging materials, always protect the side of the

washer and lay it carefully on its side. DO NOT lay the

washer on its front or back.

Shipping

Bolts

To prevent internal damage during transport, the washer

is equipped with four shipping bolts and plastic retainers.

IMPORTANT:

Power

Cord

•These shipping bolts and retainers MUST NOT be

removed until just before moving the washer into its

ﬁnal position.

•These bolts and retainers MUST be removed before

operating the washer.

•Failure to remove shipping bolts and retainers may

cause severe vibration and noise, which can lead to

permanent damage to the washer.

1. Starting with the bottom two shipping bolts, use the

wrench (included) to fully loosen all four shipping

bolts by turning them counterclockwise.

NOTE: The power cord is secured to the back of the

washer with a shipping bolt to help prevent operation

with shipping bolts in place.

Shipping Bolts

Hole Cap

2. Remove the bolt assemblies by wiggling them

slightly while pulling.

3. Locate the four hole caps included in the accessory

pack and install them in the shipping bolt holes.

Carton

Base

NOTE: Save the bolt assemblies for future use. To prevent

damage to internal components, DO NOT transport the

washer without reinstalling the shipping bolts.

Foam Tub

Support

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

CONNECTING THE WATER LINES

•IMPORTANT: Use new hoses when installing the

washer. Do NOT reuse old hoses.

•IMPORTANT: Use ONLY the inlet hoses provided with

this washer. Aftermarket hoses are not guaranteed to ﬁt or

function correctly. Other hoses may not tighten correctly

and could cause leaks. Subsequent damage to product

or property will not be covered under the terms of the

product warranty.

•Water supply pressure must be between 14.5 psi and

116 psi (100~800 kPa). If the water supply pressure is more

than 116 psi, a pressure reducing valve must be installed.

•Periodically check the hose for cracks, leaks, and wear,

and replace the hose if necessary.

3. Always run a gallon or two of water through each

inlet hose to ﬂush dirt, scale and other debris out

of the water lines. Doing so will help prevent future

problems with clogged ﬁlter screens, and will also

allow you to verify which hose is hot and which

is cold.

•Make sure that the water lines are not stretched,

pinched, crushed, or kinked.

•The washer should never be installed or stored in a

location subject to freezing temperatures. Damage to the

water lines and internal mechanisms of the washer can

result. If the washer was exposed to freezing temperatures

prior to installation, allow it to stand at room temperature

for several hours before use and check for leaks prior

to operation.

Hot

Rubber Seal

Cold

Water

Inlet

Water

Inlet

Water Hose

(to water inlet

on washer)

Water Hose

(to tap)

4. Attach the (red) hot water line to the hot water inlet on

the back of the washer. Attach the (blue) cold water line

to the cold water inlet on the back of the washer.

Tighten the ﬁttings securely.

1. Inspect the threaded ﬁtting on each hose and make

sure there is a rubber seal in place in both ends.

NOTE: When installing the hoses onto the water

inlet valves, be careful not to cross-thread the hose

ﬁttings. DO NOT overtighten the hoses; this could cause

damage to internal components, the valve or the hose

gasket. Overtightening could result in property damage

from leaks.

Water Faucet

2. Connect the water supply hoses to the HOT and

COLD water faucets tightly by hand and then tighten

another ⅔ turn with pliers.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

CONNECTING THE DRAIN HOSE

•The drain hose should always be properly secured.

Failure to properly secure the drain hose can result in

ﬂooding and property damage.

Option 2: Laundry Drum

•Do not install the end of the drain hose higher than 96

in. (243.8 cm) above the bottom of the washer.

•The drain must be installed in accordance with any

applicable local codes and regulations.

Utility Sink

•Make sure that the drain hose is not stretched, pinched,

crushed, or kinked.

Elbow

Bracket

NOTE:

A drain hose extension kit is

available if the drain hose is not

long enough. Do not extend the

drain hose more than 6 feet, as

this will cause poor draining,

which will result in poor wash

and spin performance.

Drain Hose Extension

P/N 5215ER2002K

Tie Strap

Drain Hose

The elbow bracket should be installed near the end of

the drain hose. Hang the end of the drain hose over the

side of the utility sink. Use a tie strap to secure the drain

hose in place.

Option 1: Standpipe

Elbow Bracket

Option 3: Floor Drain

Elbow

Bracket

Tie

Strap

Drain Hose

Drain Hoes

Drain Hose

Floor Drain

Install the end of the drain hose into the elbow bracket.

Do not extend the drain hose more than 4 inches past the

end of the elbow bracket. Use a tie strap to secure the

drain hose in place.

Insert the end of the drain hose into the ﬂoor drain.

If possible, secure the hose to prevent it from moving or

coming out of the drain.

NOTE:

CONNECT TO THE POWER SUPPLY

•Total height of the hose end should not exceed 96 in.

(243.8 cm) from the bottom of the washer.

Washer should be plugged into a 120-VAC, 60-Hz

grounded 3-prong outlet.

Plug in the washer.

•The drain hose should be inserted no more than 8–12

inches into the standpipe. Inserting more than 8-12

inches can cause mold or microorganisms to spread to

the inside of the washer.

Download from Www.Somanuals.com. All Manuals Search And Download.

INSTALLATION INSTRUCTIONS

LEVELING THE WASHER

The drum of your new washer spins at very high speeds.

To minimize vibration, noise, and unwanted movement,

the ﬂoor must be a level, solid surface.

NOTE: Adjust the leveling feet only as far as necessary to

level the washer. Extending the leveling feet more than

necessary can cause the washer to vibrate.

NOTE: Before installing the washer, make

sure that the ﬂoor is clean, dry and free of

dust, dirt, water and oils so the washer feet

cannot slide easily. Leveling feet that

move or slide on the ﬂoor can contribute

to excess vibration and noise due to

poor contact with the ﬂoor. See

Tighten all 4 lock nuts

securely using the

wrench.

3. Once the washer is level from side to side and front to

back, use the adjusting wrench to tighten all four lock

nuts securely to prevent the legs from getting out of

adjustment during operation. Make sure that all four

leveling feet are in ﬁrm contact with the ﬂoor.

INSTALLATION OF NON-SKID PADS

for more information.

NOTE: If a drip pan must be used, make sure to follow the

instructions provided with the drip pan and make sure the

leveling feet are adjusted for ﬁrm and even contact with

the pan. Use of drip pans and failure to properly level the

machine may result in increased vibration and noise

during operation.

All four leveling feet must rest solidly on the ﬂoor. Rock

the washer from corner to corner to make sure that all

four leveling feet are in ﬁrm and even contact with the ﬂoor.

NOTE: To make sure that the washer is properly level, run

the washer with a test load: place a medium-sized load

of laundry in the machine. Then, press POWER, select

RINSE & SPIN, and press the START/PAUSE button.

See the following sections for additional information on

cycle selection and operation. Verify that the washer does

not rock or vibrate excessively during the spin cycle. If the

washer vibrates or shakes, adjust the leveling feet, while

the washer is spinning, until the vibrations are reduced.

Level

INSTALLATION OF NON-SKID PADS

(optional)

Some ﬂoor surfaces are too slippery to prevent the

washer from moving on the ﬂoor during heavily

unbalanced loads. While it is normal for an occasional

load to be out of balance, excess noise and vibration can

result from the washer moving out of position. If these

conditions are encountered, follow the instructions below

for installation of the non-skid pads. These pads will help

prevent the washer from moving during heavy, out of

balance conditions, thereby reducing noise and vibration.

Leveling

Feet

Leveling Feet

NOTE: The non-skid pads are included in the installation

packet

1. Position the washer in its ﬁnal location, taking special

care not to pinch, strain, or crush the water and drain

lines. Place a level across the top of the washer.

Non-skid pads

This side up

Stick adhesive side to floor

Remove backing

Raise

Lower

Place the pads under both front feet.

2. Loosen the locknuts on all four leveling feet with

the wrench until you can adjust the feet (wrench

appearance may vary). Use the wrench to turn the feet

clockwise to raise the washer, and counterclockwise

to lower the washer. Using a level, adjust the feet until

the washer is level from side to side and front to back.

Make sure that all four feet are in ﬁrm contact with the

ﬂoor.

NOTE: If you are installing the washer on the optional

pedestal, the washer leveling feet should be fully retracted.

Use the leveling feet on the pedestal to level the washer.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE

To reduce the risk of ﬁre, electric shock, or injury to persons, read and follow this

WARNING:

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

CONTROL PANEL FEATURES

POWER (ON/OFF) BUTTON

Press to turn the washer ON or OFF.

SPECIAL CYCLE AND OPTION BUTTONS

These buttons are used to activate special cycles

or options.

NOTE: Pressing the POWER button during a

cycle will cancel that cycle and any load

settings will be lost. The door will unlock after a

brief pause, unless the water level or

temperature is too high.

DETERGENT AMOUNT INDICATOR (Dtg Amt)

The detergent amount indicator bars light up to

indicate the size of dry load sensed by washer

control. Follow the detergent manufacturer’s

recommendations for amount of detergent to use

based on load size. Indicator will not be accurate

if any wet clothes are placed in the washer.

NOTE: The detergent amount indicator icon does

not represent an actual detergent measuring cup

or cap. This feature is not available on all cycles.

CYCLE SELECTOR KNOB

Turn this knob to select the desired cycle. Once the

desired cycle has been selected, the standard presets

will appear in the display. These settings can be

adjusted using the cycle setting buttons anytime

before starting the cycle.

TIME AND STATUS DISPLAY

The display shows the cycle status, door lock

status and estimated time remaining.

START/PAUSE BUTTON

Press this button to start the selected cycle.

If the washer is running, use this button to pause

the cycle without losing the current settings.

STEAM TREAT BUTTON

Select the STEAM TREAT button to add steam to

NOTE: If you do not press the START/PAUSE

button within four minutes of selecting a cycle,

the washer automatically turns OFF.

the selected cycle for added cleaning power.

NOTE: The steam option is not available on all

cycles.

CYCLE MODIFIER BUTTONS

DISPENSER DRAWER

This drawer contains the compartments for

detergent and additives.

Use these buttons to adjust the settings for the

selected cycle. The settings light up above the

buttons to show the current selection.

NOTE: To protect your clothing, not all settings are available on all cycle selections.

_{Download from Www.Somanuals.co}1_m2_{. All Manuals Search And Download.}

HOW TO USE

OPERATING THE WASHER USING DETERGENT AMOUNT INDICATOR

IMPORTANT: DO NOT add detergent before beginning the wash cycle (step 5 below) when using detergent

amount indicator.

SORT LAUNDRY AND LOAD WASHER

Sort laundry by fabric type, soil level, color and load size, as needed.

Open the door and load selected items into the washer

TURN ON THE WASHER

Press the POWER button to turn ON the washer. The lights around the

cycle selector knob will illuminate and a chime will sound.

SELECT A CYCLE

Turn the cycle selector knob in either direction to select the desired cycle.

The preset Wash Temperature, Spin Speed, Soil Level,

and Option settings for that cycle will be shown.

4 SELECT CYCLE MODIFIERS & OPTIONS

Default settings for the selected cycle can now be changed if desired.

Use the cycle modiﬁer buttons.

NOTE: To protect your fabrics, not all modiﬁers are available on all

cycles. Cycle options can also be added by using the option buttons.

NOTE: Not all options are available on all cycles. A diﬀerent chime will

sound and the LED will not come on if the selection is not allowed.

5 BEGIN CYCLE

Press the START/PAUSE button to begin the cycle. The door will lock,

and the washer will brieﬂy tumble the load without water to measure its

weight. Washer will stop tumbling and the detergent amount

indicator bar(s) will light up indicating the size of the load. One bar

indicates a light load and four bars indicate a heavy load. One bar

indicates a small load, two bars medium, three bars large, and four bars

an extra-large load.

PAUSE CYCLE

When the detergent amount indicator lights up, press the

START/PAUSE button to pause the cycle.

ADD DETERGENT

Add High-Eﬃciency (HE) detergent to the detergent dispenser drawer

based on the number of illuminated bars in the detergent amount

indicator.

RESUME CYCLE

Press the START/PAUSE button to resume the wash cycle.

NOTE: If you choose not to use the detergent amount indicator feature, add detergent before Step 5 (BEGIN CYCLE).

_{Download from Www.Somanuals.co}1_m3_{. All Manuals Search And Download.}

HOW TO USE

CYCLE GUIDE

= Available Option

= Default Setting

The cycle guide below shows the default settings, available options and recommended fabric types

for each cycle. Allowable modiﬁer adjustments are shown below the default setting for each cycle.

Display

Time

(Min.)

Fabric or

Load Type

Load

Wash

Spin

Soil

Level

Steam Extra Auto Save

Treat Rinse Soak Energy+ Wash

Pre-

Cycle

Sensing Motion Temperature Speed

Cold

High

Normal

Cotton, linen,

towels, shirts,

sheets, jeans,

mixed loads

Extra

High

No Spin

Low

Normal

45-60

Yes

Hot

Tap Cold

Heavy

Light

Medium

Cold

Low

Normal

Large items

Bulky/ such as

Bedding blankets and

comforters

Warm

Hot

Tap Cold

Medium Heavy

No Spin

Light

Hot

High

Heavy

Speciﬁcally

designed to

clean and

thoroughly

rinse kids

wear

Extra

High

No Spin

Low

Kids

Wear

Tap Cold

Cold

Warm

86-103

Light

Normal

Medium

Extra

High

Cold

Heavy

Heavily

soiled

cotton fabrics

Heavy

Duty

No Spin

Low

Medium Normal

89-103

98-113

66-83

Yes

Warm

Hot

Tap Cold

Light

High

Extra Hot

High

Normal

Heavily

soiled items,

Sanitize such as work

clothes,

Extra

High

No Spin

Low

Heavy

Light

diapers, etc.

Medium

Hot

High

Normal

Heavily to

Whitest normally

Whites soiled white

cottons

Extra

High

No Spin

Low

Tap Cold

Cold

Warm

Heavy

Light

Medium

NOTE:

•To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every

cycle. A chime will sound and the LED will not light if the selection is not allowed.

•The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and other

operating conditions.

•These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound

diﬀerent at diﬀerent stages of the wash cycle. This is normal.

•The recommended load size for the Sanitize cycle is 10 lbs.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE

CYCLE GUIDE (continued)

= Available Option

= Default Setting

The cycle guide below shows the default settings, available options and recommended fabric types

for each cycle. Allowable modiﬁer adjustments are shown below the default setting for each cycle.

Display

Time

(Min.)

Fabric or

Load Type

Load

Wash

Spin

Speed

Soil

Level

Steam Extra Auto Save

Treat Rinse Soak Energy+ Wash

Pre-

Cycle

Sensing Motion Temperature

Dress shirts/

pants,

Warm

Medium Normal

wrinkle-free

clothing,

poly/cotton

blend

Hot

Tap Cold

Cold

High

Heavy

No Spin

Light

Casual

54-63

Yes

Low

clothing,

tablecloths

Extra

Light

High

Hot

Lightly soiled

clothing and

small loads

Express

Wash

No Spin

Low

Yes

Tap Cold

Cold

Warm

Normal

Medium Heavy

High

Tap Cold

High

Normal

Light

Small loads

of cotton,

linen, towels,

shirts, sheets,

jeans, mixed

loads

Extra

High

No Spin

Low

Cold Clean

Delicates

50-68

Medium

Dress shirts/

blouses,

nylons, sheer or

lacy garments

Tap Cold

Medium Normal

Yes

Cold

Warm

No Spin Heavy

Low

Light

Cold

Medium Normal

Permanent

press,

synthetic

items

Workout

Wear

Warm

Tap Cold

No Spin Heavy

Low

Light

Tap Cold

High

Extra

High

No Spin

Low

Loads that

only need to

be rinsed

Rinse and

Spin

Medium

NOTE:

•To protect your garments, not every wash temperature, spin speed, soil level, or option is available with every

cycle. A chime will sound and the LED will not light if the selection is not allowed.

•The washer automatically adjusts the wash time for the amount of laundry, water pressure, water heating time and other

operating conditions.

•These cycles use various wash motions to enhance cleaning and/or fabric care performance. The wash motions may sound

diﬀerent at diﬀerent stages of the wash cycle. This is normal.

•The recommended load size for the Sanitize cycle is 10 lbs.

_{Download from Www.Somanuals.co}1_m5_{. All Manuals Search And Download.}

HOW TO USE

SORTING WASH LOADS

Loading the Washer

•Check all pockets to make sure that they are empty.

Items such as clips, matches, pens, coins, and keys can

damage both your washer and your clothes.

Fabric Care Labels

Many articles of clothing include a fabric care label.

Using the chart below, adjust the cycle and option

selections to care for your clothing according to the

manufacturer’s recommendations.

•Close zippers, hooks, and drawstrings to prevent these

items from snagging or tangling on other clothes.

•Pretreat heavily stained areas for best results.

•Combine large and small items in a load. Load large

items ﬁrst.

•Large items should not be more than half of the total

wash load.

•The drum should not be tightly packed with items. The

door of the washer should close easily.

•To prevent an out-of-balance load, do not wash

single items. Add one or two similar items to the load.

Large, bulky items, such as a blanket, comforter, or

bedspread, should be washed individually.

•Do not wash or spin waterproof items, such as rain

coats, sleeping bags, etc.

•When unloading the washer, check under the door seal

for small items.

Grouping Similar Items

For the best washing results, and to reduce the possibility of

damage to clothing, care should be taken to sort the

clothing into loads that are made up of similar items.

Mixing diﬀerent fabric types and/or soil levels can result

in poor wash performance, color transfer or discoloration,

fabric damage or linting. Fabrics should be sorted into

groups as described below.

NOTE: Make sure that the door seal area is clear when

closing the door. Overloading the washer can cause items

to get caught between the door and the seal. This can

damage both the items and the seal.

Colors

Sort articles by color. Wash dark clothes together in a

separate load from light colors or whites. Mixing dark

clothes with light clothes can result in dye transfer or

discoloration of the lighter clothes.

Soil Level

Wash heavily soiled clothing together. Washing lightly

soiled clothing in the same load with heavily soiled

clothing could result in poor wash performance for the

lightly soiled clothing.

Fabric Type

• DO NOT OVERLOAD THE DRUM

• MAKE SURE CLOTHING IS NOT

CAUGHT IN THE DOOR GASKET

Delicate articles should not be mixed with heavier or

sturdier fabric types. Washing delicates in a load with

heavy fabrics can result in damage to the more delicate

fabrics. Washing heavier fabrics in a delicate load can

result in poor wash performance for the heavier fabrics

and possible damage to the delicates.

Sort Laundry...

Lint Type

by Colors

by Soil

by Fabric

by Lint

Some fabrics attract and bind lint to them while others

give oﬀ lint in the laundry process. Avoid mixing these

lint collectors and lint producers in the same load. Mixing

these fabrics will result in pilling and linting on the lint

collectors. (For example, lint collector – knit sweater; lint

producer – terrycloth towels.)

Whites

Lights

Darks

Heavy

Normal

Light

Delicates

Easy Care

Sturdy

Lint Producer

Lint Collector

_{Download from Www.Somanuals.co}1_m6_{. All Manuals Search And Download.}

HOW TO USE

ABOUT THE DISPENSER DRAWER

Liquid Chlorine

Bleach

Compartment

Liquid Fabric

Softener

Compartment

The automatic dispenser consists of four compartments

which hold:

Liquid

Detergent

Cup

•Liquid chlorine bleach.

•Liquid fabric softener.

•Liquid or powdered detergent for prewash.

•Liquid or powdered detergent and color-safe bleach

for main wash.

Prewash

Detergent

Compartment

Main Wash Detergent

Compartment

Pre-Wash Detergent Compartment

Add liquid or powdered detergent to this compartment

when using the Pre-Wash option. Always use High-

Eﬃciency (HE) detergent with your washing machine.

Liquid Bleach Compartment

This compartment holds liquid chlorine bleach, which is

dispensed automatically at the proper time during the

wash cycle.

The amount of detergent added for the Pre-Wash

option should be ½ the amount recommended for the

main wash cycle. For example, if the main wash cycle

requires ½ measure of detergent, add ¼ measure to the

Pre-Wash compartment.

•Do not add powdered or liquid color-safe bleach to

this compartment. The bleach compartment is designed

to dispense liquid chlorine bleach only. Powdered or

liquid color-safe bleach will not dispense properly.

•Always follow the manufacturer’s recommendations

when adding bleach. Do not exceed the maximum ﬁll

line since this can cause the bleach to be dispensed

immediately, causing damage to fabrics. Using too much

bleach can damage fabrics.

NOTE: If using liquid detergent for the main wash when

using the Pre-Wash option, the liquid detergent cup

accessory must be used in the main wash dispenser. This

will prevent the main wash liquid detergent from being

dispensed immediately.

•Never pour undiluted liquid chlorine bleach directly

onto the load or into the drum. Fabric damage can occur.

Main Wash Detergent Compartment

Fabric Softener Compartment

This compartment holds liquid fabric softener, which is

automatically dispensed during the ﬁnal rinse cycle.

This compartment holds laundry detergent for the main

wash cycle. The detergent is added to the load at the

beginning of the cycle. Always use High-Eﬃciency (HE)

detergent with your washing machine. Either powdered

or liquid detergent may be used.

Never exceed the manufacturer’s recommendations when

adding softener. Using too much fabric softener can result

in buildup in clothing and the washer. Either powdered or

liquid fabric softener may be used.

Never exceed the manufacturer’s recommendations

when adding detergent. Using too much detergent can

result in detergent buildup in clothing and the washer.

•Always follow the manufacturer’s recommendations

when adding fabric softener. Do not exceed the

maximum ﬁll line. Using too much fabric softener may

stain clothes.

NOTE: Liquid or powdered color-safe bleach may be

added to the main wash compartment with detergent of

the same type. DO NOT add liquid or powdered

color-safe bleach to the bleach dispenser. DO NOT mix

liquid and powdered cleaning agents within the same

compartment.

•Dilute concentrated fabric softeners with warm water.

Do not exceed the maximum ﬁll line.

•Never pour fabric softener directly onto the load or

into the drum.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE

DETERGENT AND DISPENSER USE

A Word About Detergents

Detergent Amount

High-Eﬃciency (HE) detergents produce fewer suds,

dissolve more eﬃciently to improve washing and rinsing

performance, and help to keep the interior of your

washer clean. Using detergent that is not HE may cause

oversudsing and unsatisfactory performance which

could result in error codes, cycle failure, and

machine damage.

Use the detergent amount indicator to help

determine the correct amount of detergent to use.

Bars light up to indicate the size of the dry load sensed

by the washer control. Follow the detergent manufacturer’s

recommendations for the amount of detergent based on

load size. The indicator will not be accurate if any wet

clothes are placed in the washer.

NOTE: The detergent amount indicator icon does not

represent an actual detergent measuring cup or cap.

Maximum

Normal Load Amount

Filling the Dispenser

To add detergent, bleach, and fabric softener to the

automatic dispenser:

Liquid

Detergent

Powdered

Detergent

For proper wash performance, always measure the

detergent using the measurements provided by the

detergent manufacturer.

Open the dispenser drawer.

Load the laundry products into the

appropriate compartments.

The normal amount of HE detergent needed, for average

loads, is less than ½ of the recommended maximum.

Use less detergent for soft water, light soil or smaller

loads. Never use more than the maximum amount

recommended by the detergent manufacturer.

Close the drawer before starting the cycle.

NOTE: It is normal for a small amount of water to

remain in the bleach and softener compartments at the

end of the cycle.

IMPORTANT: Do not place or store laundry products,

such as detergent, bleach, or liquid fabric softener, on top

of your washer or dryer. Wipe up any spills immediately.

These products can damage the ﬁnish and controls.

Designed to use only

High-Eﬃciency (HE) detergent

IMPORTANT: Your washing machine is designed for use

with only High-Eﬃciency (HE) detergents. HE detergents

are formulated speciﬁcally for front-load washers and

contain suds-reducing agents. Always look for the HE

symbol when purchasing detergent.

1 bar = small load

IMPORTANT: Not all detergents are the same. Pay

careful attention to the amount of detergent used to

avoid oversudsing, poor rinsing and detergent buildup in

clothing, and residue buildup that can contribute to odors

in the machine. NEVER use a cup or scoop other than the

one supplied by the manufacturer of the detergent you

are using. Never use more than the maximum amount of

detergent recommended by the manufacturer.

2 bars = medium load

3 bars = large load

4 bars = extra-large load

Always measure the detergent amount. While HE

detergents are designed for this type of washing

machine, be careful when measuring the detergent. For

most normal loads, no more than ¼ to ½ of cap or

scoop of HE detergent should be used.

NOTE: Extra care must be exercised when using 2X and

3X concentrated detergents because even a little bit extra

can contribute to the problems mentioned above.

NOTE: Detergents designated as HE compatible may not

provide optimal results.

_{Download from Www.Somanuals.co}1_m8_{. All Manuals Search And Download.}

HOW TO USE

TIME AND STATUS DISPLAY

The time and status display shows the estimated time remaining, cycle progress, and door lock status.

ESTIMATED TIME REMAINING

CYCLE STATUS INDICATOR

These status LEDs illuminate to indicate which

stage of the cycle is currently running. A blinking

light indicates the active stage of the cycle. When

that stage is complete, the light will remain steady.

When the START/PAUSE button is pressed, the

washer will automatically detect the load size for

cycles that use load sensing. The control will then

optimize the wash and rinse times, based on the se-

lected cycle, modiﬁers and options. When the load

size has been determined, the display will change

from dashes (- - -) to the estimated time for that

cycle. For non-load sensing cycles, the estimated

time will display when the cycle is selected.

DOOR LOCK INDICATOR

Indicates that the door is locked. The washer door

will lock while the washer is operating. The door can

be unlocked by pressing START/PAUSE to pause

the washer.

NOTE:

•The time shown is only an estimate. For example,

the time displayed may pause for a period of time

while the machine is heating the water or balancing

the load. Under certain conditions, the machine can

pause for extended periods of time.

•If the temperature in the washer is too high, the

door cannot be unlocked until the washer

has cooled.

•If the water level is too high, the door will not

unlock. To drain the water, press POWER, then press

the SPIN SPEED button without selecting a cycle.

Press START/PAUSE and the water will drain and

the clothes will spin out. Do not try to force the door

open, as it will damage the door.

•Estimated time is based on normal operating

conditions. Several external factors (load size, room

temperature, incoming water temperature, etc.) also

aﬀect the length of estimated time vs. actual time.

LOAD-SENSING INDICATOR

At the beginning of cycles that use the load sensing

feature, the LOAD SENSING light will blink while the

load size is being measured. Once the size has been

determined, the control adjusts the cycle for

optimum performance. Estimated time remaining will

not display until the load size has been determined,

and may be diﬀerent for each load.

DETERGENT AMOUNT INDICATOR

The detergent amount indicator

displays the

suggested amount of detergent for the load. Fewer

lit bars indicate a smaller load; therefore, less

detergent should be used.

_{Download from Www.Somanuals.co}1_m9_{. All Manuals Search And Download.}

HOW TO USE

CYCLE MODIFIER BUTTONS

NOTE: To protect your garments, not every wash

temperature, spin speed, soil level, or option is available

with every cycle. A chime will sound and the LED will not

light if a selection is not allowed.

Each cycle has default settings that are selected

automatically. You may also customize these settings

using the cycle modiﬁer buttons. Press the button for the

desired modiﬁer until the indicator light for the desired

value is lit. The washer automatically adjusts the water

level for the type and size of wash load for best results

and maximum eﬃciency. Due to the high-eﬃciency

nature of this product, water levels may be much lower

than expected. This is normal operation and cleaning/

rinsing performance will not be compromised.

SPIN SPEED

WASH TEMP

Wash Temp selects the wash and rinse temperature

combination for the selected cycle. Press the Wash

Temp button until the indicator light for the desired

setting is lit.

•Your washer features a heating element to boost

the hot water temperature for Extra Hot settings.

This provides improved wash performance at

normal water heater settings.

•Select the water temperature suitable for the type

of load you are washing. Follow the garment fabric

care labels for best results.

•Warm rinses are regulated at approximately

86°F (30°C).

Higher spin speeds extract more water from clothes,

reducing drying time and saving energy.

Press the SPIN SPEED button until the desired speed

is selected. Some fabrics, such as delicates, require

a slower spin speed. To protect your clothing, not all

spin speeds are available for all cycles.

The Drain & Spin cycle:

1. Press the POWER button to turn ON the washer.

2. Press the SPIN SPEED button to select the desired

spin speed. For drain only, select the

NO SPIN option.

3. Press the START/PAUSE button. The water will

drain and the clothes will tumble before

the spin routine begins.

•Warm rinses leave the clothes dryer than

cold rinses, but will result in increased energy

consumption and greater wrinkling of clothes.

SOIL LEVEL

•Cold rinses use less energy. The actual rinse

temperature depends on the temperature of the

cold water at the faucet.

Adjusting the soil level setting will modify the cycle

to allow more time for heavily soiled clothes or less

time for lightly soiled clothes. Press the SOIL LEVEL

button until the desired soil level is selected.

D CHIME

Press repeatedly to adjust the volume of the chime

and keypad tones. You may turn the end-of-cycle

chime and keypad tones ON or OFF with the CHIME

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE

STEAM CYCLES AND OPTIONS

STEAM TREAT Option

STEAM cycles include Normal, Bulky/Bedding, Kids Wear,

Heavy Duty, Sanitize and Whitest Whites. Adding steam to

these cycles helps provide improved cleaning performance. By

creating steam, fabrics get the beneﬁt of a deep clean.

CAUTION:

The door may be very warm during steam cycles. This

is normal.

Do not attempt to override the door lock mechanism or

reach into the washer during a steam cycle. Steam can

cause severe burns.

IMPORTANT NOTES ABOUT STEAM CYCLES:

•Steam may not be visible during the steam cycles. This

is normal.

•Do not use steam with delicate fabrics such as wool,

silk, or easily discolored fabrics.

To add steam to a cycle:

Turn ON the washer and turn the cycle selector knob to

select a cycle that allows the steam option.

Press the STEAM TREAT button. The washer will

automatically adjust the cycle settings.

Set any other desired options.

Press the START/PAUSE button to start the cycle.

_{Download from Www.Somanuals.co}2_m1_{. All Manuals Search And Download.}

HOW TO USE

OPTION BUTTONS

Your washing machine features several additional cycle

options that customize cycles to meet your individual needs.

STAY FRESH

This feature helps keep wrinkles from setting

in clothes and helps keep them fresh if they

are not removed from the washer as soon as

the cycle is complete. Press the STAY FRESH

button to tumble the clothes intermittently

Turn ON the washer and turn the cycle selector knob to

select the desired cycle.

Use the cycle modiﬁer buttons to adjust the settings for

that cycle.

and circulate fresh air through the drum for up to eight hours.

Press the POWER button or the START/PAUSE button to

remove clothes at any time.

Press the cycle option button(s) for the option(s) you

would like to add. The button will light when that option

is selected. For secondary functions, press and hold

the button for three seconds. The LED will blink when

the secondary option is selected. Both options cannot be

selected together.

PRE WASH

Select this option to add a 16-minute pre-

wash, rinse and spin cycle to the chosen

cycle. This is especially useful for heavily

soiled items.

If the selected option is not allowed for the selected

cycle, the chime will sound twice to alert you and

the LED will not illuminate.

Press the START/PAUSE button to start the cycle. After a

brief delay, the door will lock and the cycle will begin.

NOTE: To protect your garments, not every option is

available with every cycle.

NOTE: If the START/PAUSE button is not pressed within four

minutes, the control will shut oﬀ and the settings will be lost.

DELAY START

Once you have selected the cycle and other

settings, press this button to delay the start of

the wash cycle. Each press of the button

increases the delay time by one hour, for up

to 19 hours. Once the desired delay time is set, press the

START/PAUSE button to start the delay time.

EXTRA RINSE

This option will add an extra rinse to the

selected cycle. Use this option to help

ensure the removal of detergent or bleach

residue from fabrics.

ACCELA-WASH

The Accela-Wash option uses a twin spray

water and detergent injection which

reduces cycle time while maintaining wash

performance in a normal cycle.

Download from Www.Somanuals.com. All Manuals Search And Download.

HOW TO USE

SPECIAL FUNCTIONS

CONTROL LOCK

MY CYCLE

Use this option to disable the controls. The

MY CYCLE allows you to store a customized

wash cycle for future use. It allows you to

save favorite temperature, spin speed, soil

level, and other options for a cycle, and

washer can only be locked during a cycle.

This feature can prevent children from

changing cycles or operating the machine.

Once set, the controls remain locked and

then recall them at the touch of a button.

must be turned OFF before the controls can be used again.

Once the washer has shut oﬀ, the power button will allow

the machine to be turned ON, but the controls will still be

locked. When the controls are locked, the STAY FRESH LED

will illuminate and “CL” will display alternately with the

estimated time remaining.

NOTE: You can only save a setting for one cycle at a

time. Pressing and holding the MY CYCLE button will

overwrite any previously saved cycle.

To save a MY CYCLE:

Press the POWER button to turn on the washer.

Turn the cycle selector knob to select the desired cycle.

Press the CYCLE MODIFIER button to change the desired setting.

Press the CYCLE OPTION button to add the desired options.

Press and hold the MY CYCLE button.

Press and hold the STAY FRESH button for ﬁve seconds to

activate or deactivate the controls.

CLEAN WASHER

Detergent residue can build up in the wash

drum over time and can lead to a mildewy

or musty smell. The CLEAN WASHER cycle is

specially designed to remove this buildup

using bleach or another cleaner designed speciﬁcally for

cleaning front load washers. Run the CLEAN WASHER cycle

once a month, or more often under heavy use conditions or if

odor is present. See complete instructions in the CARE AND

CLEANING section.

To recall a MY CYCLE:

Press the POWER button to turn on the washer.

Press the MY CYCLE button. The stored settings will be

displayed.

Turn ON the washer and press and hold the ACCELA-

WASH button for three seconds. Selecting any other

cycle after CLEAN WASHER has been selected will

cause the CLEAN WASHER cycle to be cancelled.

3 Press the START/PAUSE button to start the cycle.

NOTE: MY CYCLE can be adjusted the same as any

other cycle. However, once any other button is pressed,

the LED will turn oﬀ indicating that the settings are no

longer those of your saved cycle.

Fill the bleach dispenser to the MAX line with liquid

chlorine bleach. Do not overﬁll the bleach dispenser.

Overﬁlling will cause the bleach to dispense immediately.

NOTE: For other drum cleaning products, follow

the cleaner manufacturer’s instructions and

recommendations. For powdered cleaning products,

add the cleaner to the main wash compartment of

the dispenser drawer. Place tablet cleaners directly

into the drum.

AUTO SOAK

Use the AUTO SOAK option to presoak

garments to help remove diﬃcult spots or

stains on fabric. This option provides a 30

minute presoak prior to the start of the

selected cycle. At the end of the presoak

time, the selected cycle will use the same water.

Press the START/PAUSE button to start the cycle.

After the cycle has ended, secure the door slightly ajar

with the door magnet. This will promote air circulation

and allow the interior of the machine to dry. To use this

feature, close the door just until it contacts the door

magnet.

To use the AUTO SOAK feature, press and hold the

STEAM TREAT button for three seconds.

SAVE ENERGY

NOTE: Do NOT use this cycle with clothes, and do

NOT add detergent or fabric softener.

This option saves energy by using cooler

water while increasing the wash and rinse

times to maintain wash performance. This

feature is only available with the NORMAL

and HEAVY DUTY cycles as listed below.

To use the Save Energy option, press and hold the Pre Wash

button for three seconds.

•NORMAL – Hot becomes Cold

•NORMAL – Cold becomes Tap Cold

•HEAVY DUTY – Hot becomes Cold

Download from Www.Somanuals.com. All Manuals Search And Download.

CARE AND CLEANING

To reduce the risk of ﬁre, electric shock, or injury to persons, read and follow this

WARNING:

entire Use & Care Guide, including the Important Safety Instructions, before operating this washer.

• Unplug the washer before cleaning to avoid the risk of electric shock. Failure to follow this warning can

cause serious injury, ﬁre, electric shock, or death.

• Never use harsh chemicals, abrasive cleaners, or solvents to clean the washer. They will damage the ﬁnish.

REGULAR CLEANING

Cleaning the Exterior

Proper care of your washer can extend its life. The outside of

the machine can be cleaned with warm water and a mild,

nonabrasive household detergent.

Door Seal and Glass Cleaning

Due to the location and nature of the door seal, some

detergent and soil residue may build up on the door glass

and seal. Periodic cleaning with a bleach solution can help

remove buildup and stains, and can help sanitize the seal to

prevent odors.

Immediately wipe oﬀ any spills with a soft, damp cloth.

IMPORTANT: Do not use solvents, cleaning alcohols, or simi-

lar products. Never use steel wool or abrasive cleaners

because they can damage the surface.

NOTE: Wear rubber gloves and eye protection while

performing the following procedure:

Care and Cleaning of the Interior

Dilute ¾ cup (177 ml) liquid chlorine bleach in 1

gallon (3.8 L) of warm/hot water.

Use a towel or soft cloth to wipe around the washer door

opening, door seal, and door glass. These areas should be

kept clean to ensure a watertight seal. Be sure to wipe

under the inside rubber seal to remove any moisture or soil.

Use this solution to wipe down

all surfaces of the gasket and

door glass to remove any

deposits. Be sure to fold back the

lip of the gasket to get under

the inner edge where residue

can build up.

Always remove items from the washer as soon as the cycle

is complete. Leaving damp items in the washer can cause

wrinkling, color transfer, and odor. Run the CLEAN WASHER

cycle once a month, or more often if needed, to remove

detergent buildup and other residue.

Dry the gasket and glass with a dry cloth.

Clean Washer

Remove any clothing in the drum.

Open the dispenser drawer.

To allow the gasket to dry completely, secure the

door slightly ajar with the door magnet. This will

promote air circulation and allow the interior of the

machine to dry. To use this feature, close the door

just until it contacts the door magnet.

Add liquid chlorine bleach or another drum cleaner

designed speciﬁcally for cleaning front load

washers.

- If using liquid chlorine bleach

NOTE:

Add liquid chlorine bleach to the bleach

compartment of the drawer. (NOTE : Do not

exceed the maximum ﬁll line and do not pour

undiluted liquid bleach directly into the wash

drum.)

•Follow the manufacturer’s instructions for proper use

of bleach.

•To avoid damaging the gasket, NEVER use undiluted

bleach to clean the gasket.

- If using powder cleaner

Removing Mineral Buildup

If you live in an area with hard water, mineral scale can form

on internal components of the washer. Use of a water softener

is recommended in areas with hard water.

Use a descaler, such as Washer Magic^®, to remove visible

mineral buildup. After descaling, always run the CLEAN

WASHER cycle before washing clothing. Do NOT use steel

wool or abrasive cleaners.

Remove the liquid detergent cup and add powder

cleaner to the main wash compartment of the

dispenser drawer.

- If using tablet cleaner

Add tablet cleaner directly to the wash drum.

NOTE:

•Do not add tablet cleaner to the dispenser drawer.

•Do not add any laundry detergent or fabric softener to

the drawer when using CLEAN WASHER.

Turn ON the washer and press and hold the

ACCELA-WASH button for three seconds, and the LED

will blink. Selecting any other cycle after CLEAN

WASHER has been selected will cause the CLEAN

WASHER cycle to be cancelled.

After the cycle ends, open the door and allow the

drum interior to dry completely.

NOTE: Run the CLEAN WASHER cycle once a month. If a

mildewy or musty smell is present, run the CLEAN

WASHER cycle once a week for three consecutive weeks.

Download from Www.Somanuals.com. All Manuals Search And Download.

CARE AND CLEANING

REGULAR CLEANING (continued)

Storing the Washer

If the washer will not be used for an extended period of time

and is in an area that could be exposed to freezing

temperatures, perform the following steps to protect the

washer from damage.

Press the POWER button, then press the SPIN SPEED

button without selecting a cycle. Press the START/PAUSE

button to activate the drain pump. This will expel some

of the antifreeze, leaving enough to protect the washer

from damage.

Unplug the power cord, dry the drum interior with a soft

cloth, and close the door.

Turn OFF the water supply.

Disconnect hoses from water supply and drain water

from hoses.

7 Refer to the instructions below to clean and dry the

dispenser drawer.

Plug the power cord into a properly grounded

electrical outlet.

Add 1 gallon of nontoxic recreational vehicle (RV)

antifreeze to the empty wash drum and close the door.

Store the washer in an upright position.

To remove the antifreeze from the washer after

storage, run the EXPRESS WASH cycle. Do not add

laundry to this cycle.

Cleaning the Dispenser

The dispenser should be cleaned periodically to remove buildup of detergent and other laundry products that can

cause the dispenser not to dispense the laundry product properly.

Press down the lock tab located between the bleach

and softener compartments and slide the drawer out.

Pull the dispenser drawer out until it stops.

Remove the liquid detergent box, softener and

bleach inserts from their compartments.

Clean the dispenser compartments and inserts with

warm soapy water.

Download from Www.Somanuals.com. All Manuals Search And Download.

CARE AND CLEANING

MAINTENANCE

Cleaning the Water Inlet Filters

If the washer does not ﬁll properly, an error message will

show on the display. The inlet valve ﬁlter screens could

be plugged by hard water scale, sediment in the water

supply, or other debris.

NOTE: The inlet screens protect the delicate parts of the

inlet valve from being damaged by particles that could

enter the valves with the water supply. Operating the

washer with these ﬁlters removed could cause a valve to

fail to open, resulting in ﬂooding and/or

property damage.

Inlet Filter

1. Turn OFF both water faucets completely. Unscrew the

Carefully remove the ﬁlters from the water valves

and soak them in white vinegar or a lime scale

remover, following the manufacturer’s instructions. Be

careful not to damage the ﬁlters while cleaning.

hot and cold water lines from the back of the washer.

IMPORTANT: ONLY use the inlet hoses provided with

this laundry product. Aftermarket hoses are not

guaranteed to ﬁt or function correctly. Other hoses may

not tighten correctly and could cause leaks. Subsequent

damage to product or property will not be covered under

the terms of the product warranty.

3 Rinse thoroughly before reinstalling. Press the ﬁlters

back into place.

Before reattaching the hoses, ﬂush the hoses and

water lines by running several gallons of water

through the hoses and into a bucket or drain.

Download from Www.Somanuals.com. All Manuals Search And Download.

CARE AND CLEANING

MAINTENANCE (continued)

Cleaning the Drain Pump Filter

Your Washer is equipped with a ﬁlter that helps prevent excess

lint and foreign objects like buttons, keys, and coins from

causing damage to the pump. If the washer fails to drain

properly, unplug the washer and allow the water to cool, if

necessary, before proceeding.

Plug

1. Open the drain pump ﬁlter access panel.

Remove the plug from the drain hose, and allow the

water to drain completely.

NOTE: If there is a large amount of water in the drum,

you may have to empty your container several times.

Pump Filter

Drain Hose

2 Unclip the drain hose and pull it out. Place the end

of the drain hose into a shallow pan or a ﬂoor

drain. Make sure not to pull the hose out too far, or

it may not drain properly.

Twist the pump ﬁlter counterclockwise to remove.

Remove any lint and foreign objects from the pump

ﬁlter. Insert pump ﬁlter back into opening and twist

clockwise to secure. Be sure to close the drain pump

ﬁlter access panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

Kenmore Connect™ System

If you experience problems with your washer, call

Should you experience any problems with your

washing machine, it has the capability of transmitting

data via your telephone to the Kenmore Connect

Team. This gives you the capability of speaking

directly to our specially trained technicians. The

technician records the data transmitted from your

machine and uses it to analyze the issue, providing a

fast and eﬀective diagnosis.

1-800-4-MY-HOME^®. Only use the Kenmore Connect

System feature when instructed to do so by the

Kenmore Connect Team. The transmission sounds that

you will hear are normal and sound similar to a fax

machine.

Kenmore Connect cannot be activated unless your

washing machine is turned on by pressing the POWER

button. If your washing machine is unable to turn

on, then troubleshooting must be done without using

Kenmore Connect.

Using the Kenmore Connect™ System

Follow the technician’s instructions and perform

the following steps when requested.

HOLD the mouthpiece of your phone over the POWER button, when instructed to do so by

the call center, no more than one inch from (but not touching) the machine.

NOTE: Do not press any other buttons or turn the cycle selector knob.

PUSH and hold the WASH TEMP button while continuing to hold your phone to the

POWER button.

LISTEN for three beeps. After you hear the three beeps, release the WASH TEMP button.

Keep the phone in place until the tone transmission has ﬁnished. This takes about 17 seconds,

and the display will count down the time. Once the countdown is over and the tones have

stopped, resume your conversation with the technician, who will then be able to assist you in

using the information transmitted for analysis.

NOTE:

•For best results, do not move the phone while the tones are being transmitted.

•If the call center agent is not able to get an accurate recording of the data, you may be

asked to try again.

•Pressing the POWER button during the transmission will shut oﬀ Kenmore Connect.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING GUIDE

NORMAL SOUNDS YOU MAY HEAR

The following sounds may be heard while the washer is

operating. They are normal.

Clicking:

Humming or gurgling:

Drain pump is pumping water from the washer at times

during a cycle.

Door locking mechanism clicks when the door locks and

unlocks.

Spraying or hissing:

Water spraying or circulating during the cycle.

Splashing:

Clothes tumbling in the drum during the wash and rinse

cycles.

BEFORE CALLING FOR SERVICE

If your washer does not function properly or does not function at all, check the following before you call for service.

Problem

Possible Cause

Solutions

Rattling and clanking

noise

Foreign objects, such as keys, coins, or safety

pins, may be in drum or pump.

Stop washer, check drum and drain ﬁlter for

foreign objects. If noise continues after washer is

restarted, call for service.

Thumping sound

Vibrating noise

Heavy wash loads may produce a

thumping sound.

This is normal. If sound continues, washer is

probably out of balance. Stop and

redistribute wash load.

Washer load may be out of balance.

Washing shoes or tightly tangled clothes.

Shipping bolts and/or packaging materials

were not removed.

Pause the cycle and redistribute the load

after the door unlocks.

See the UNPACKING AND REMOVING SHIP-

PING BOLTS section in the installation require-

ments.

Wash load may be unevenly distributed in

the drum.

Pause the cycle and redistribute the load after

the door unlocks.

Not all leveling feet are resting ﬁrmly and See Leveling the Washer in the Installation

evenly on the ﬂoor.

Instructions.

Floor not rigid enough.

Make sure that the ﬂoor is solid and does

not ﬂex. See Flooring in the Installation

Requirements.

Water leaking around

washer

Inlet hose connection is loose at tap

or washer.

Check hoses. Check and tighten hose

connections.

House drain pipes are clogged.

Unclog drain pipe. Contact a plumber if

necessary.

Drain hose has come out of drain.

Drain hose is not inserted far enough.

Tie drain hose to inlet hose or standpipe to

prevent it from coming out during drain. It

should be inserted about 8-12 inches into

the standpipe.

Door glass is dirty.

Inspect door glass periodically to make

sure there is no buildup of residue or other

foreign matter. Follow cleaning instructions.

Excessive sudsing

Too much detergent or incorrect detergent.

Only use detergent with the High-

Eﬃciency (HE) logo. See Detergent

Use in the How to Use section.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING GUIDE

BEFORE CALLING FOR SERVICE (continued)

Problem

Possible Cause

Solutions

Staining

Bleach or softener dispensed

too soon.

Dispenser compartment is overﬁlled causing

bleach or softener to dispense immediately.

Dispenser drawer closed too quickly causing

bleach or softener to dispense immediately.

Bleach or softener was added

Laundry chemicals must be loaded into the

directly to the wash load in the drum. dispenser.

Washer was not unloaded promptly. Always remove items from the washer as soon

as possible after the cycle is complete.

Clothes were not properly sorted.

Always wash dark colors separately from light

colors and whites to prevent discoloration.

Never wash heavily soiled items with lightly

soiled items.

Washer will not turn ON Power cord is not properly plugged in. Make sure that the plug is plugged securely into

a grounded, 3-prong, 120-VAC, 60-Hz outlet.

House fuse is blown, circuit breaker

has tripped, or power outage has

occurred.

Reset circuit breaker or replace fuse. Do not

increase fuse capacity. If the problem is a circuit

overload, have it corrected by a qualiﬁed

electrician.

House fuse is blown, circuit breaker

has tripped, due to multiple

appliances on one outlet.

Reset circuit breaker or replace fuse. If more

than one appliance is connected to the outlet,

call an electrician to have an additional circuit

installed.

Door will not unlock

when cycle is stopped or

paused

Interior temperature of washer is too high. The washer door has a safety feature to prevent

personal injury. For example, if the washer is

paused during the hot wash stage of a sanitize

cycle, the interior temperature of the drum will

be very hot, so the door will not unlock. This

is normal. Allow the washer to cool until the

DOOR LOCK indicator turns OFF on the display.

Water level in washer is too high.

To drain the water, press POWER, then press the

SPIN SPEED button without selecting a cycle.

Wash cycle time is longer

than usual

The washer automatically adjusts the

wash time for the amount of laundry,

This is normal. The washer adjusts cycle time auto-

matically to provide optimal results for the selected

water pressure, water heating time and cycle. The time remaining shown in the display is only

other operating conditions.

an estimate. Actual time may vary.

Musty or mildewy odor in Incorrect or too much detergent has Use only High-Eﬃciency (HE) detergent in

washer

been used.

accordance with the manufacturer’s instructions.

Inside of drum was not cleaned prop- Run the CLEAN WASHER cycle regularly. Be

erly.

sure to wipe around and under the door seal

frequently. See Care and Cleaning of the Inte-

rior.

Clean around door seal/glass to prevent odor.

Wrinkling

Washer not unloaded promptly.

Washer overloaded.

Always remove items from the washer as soon

as the cycle is complete.

When washing large loads, do not overstuﬀ the

drum. The washer can be fully loaded, but the

drum should not be tightly packed and the door

should close easily.

Hot and cold water inlet hoses are

reversed.

Hot water rinse can set wrinkles in garments.

Check the inlet hose connections.

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING GUIDE

BEFORE CALLING FOR SERVICE (continued)

Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an

early stage.

Problem

Possible Cause

Solutions

Water in the washer

drains slowly or not at

all, or the

Drain hose is kinked, pinched, or clogged. Make sure the drain hose is free of clogs, kinks,

etc., and is not pinched behind or under the

washer.

display shows:

The drain pump ﬁlter is clogged.

Clean the drain pump ﬁlter. See Maintenance in

the Care and Cleaning section.

Drain discharge is more than 96 inches

above bottom of washer.

Adjust or repair drain. Maximum drain height is

96 inches.

Washer ﬁlls with water

slowly or not at all, or

the display shows:

Water supply faucets are not open fully.

Make sure that the water faucets are fully open.

Water line hoses are kinked, pinched, or

crushed.

Make sure the hoses are not kinked or pinched.

Be careful when moving the washer during

cleaning and maintenance

Water inlet ﬁlters are clogged.

Clean the inlet ﬁlters. See Maintenance in the

Care and Cleaning section.

Water supply pressure to faucet or house is Check another faucet in the house to make sure

too low.

that household water pressure is adequate and

ﬂow is not restricted.

Water supply connected with leak-limiting Hoses designed to limit leaks can trip falsely

hoses.

and prevent the washer from ﬁlling. The use of

leak limiting hoses is not recommended.

Cycle won’t start, or the

display shows:

The door is not closed properly.

Make sure that the door is closed properly and

press the START/PAUSE button. After starting

a cycle, it may take a few moments before the

drum begins to turn or spin. The washer will not

operate unless the door is locked.

If the door is closed and locked and the open

door error message is displayed, call

for service.

The display shows:

Load is too small.

Add 1 or 2 similar items to help balance the load.

Load is out of balance.

The washer has an imbalance detection and

correction system. If individual heavy articles are

loaded (bath mat, bath robe, etc.) and the imbal-

ance is too great, the washer will make several

attempts to restart the spin cycle. If an imbalance

is still detected, the washer will stop and the error

code will display.

The display shows:

Control error.

Unplug the washer and wait 60 seconds. Reconnect

power and try again. If the error reappears, call for

service.

The display shows:

Water level is too high due to a faulty

water valve.

Close the water faucets, unplug the washer, and

call for service.

The water level sensor is not working

correctly.

Close the water faucets, unplug the washer, and

call for service.

The display shows:

A motor error has occurred.

A power failure has occurred.

Allow the washer to stand for 30 minutes and

then restart the cycle. If the LE error code per-

sists, call for service.

If the power to the washer has been interrupted

during a cycle, the PF error code will display

the next time the washer is turned ON. This will

alert you to the fact that the previous cycle may

not have been completed. Select any cycle to

clear the error code and use the washer.

_{Download from Www.Somanuals.co}3_m1_{. All Manuals Search And Download.}

WARRANTY

Kenmore Elite Limited Warranty

When installed, operated and maintained according to all instructions supplied with the product, if this

appliance fails due to a defect in material and workmanship within one year from the date of purchase, call

1-800-4-MY-HOME^®to arrange for free repair.

If this appliance is ever used for other than private family purposes, this warranty applies for only 90 days

from the date of purchase.

This warranty covers only defects in material and workmanship. Sears will NOT pay for:

1. Expendable items that can wear out from normal use, including but not limited to ﬁlters, belts, light bulbs,

and bags.

2. A service technician to instruct the user in correct product installation, operation or maintenance.

3. A service technician to clean or maintain this product.

4. Damage to or failure of this product if it is not installed, operated or maintained according to all the

instructions supplied with the product.

5. Damage to or failure of this product resulting from accident, abuse, misuse or use for other than its

intended purpose.

6. Damage to or failure of this product caused by the use of detergents, cleaners, chemicals or utensils

other than those recommended in all instructions supplied with the product.

7. Damage to or failure of parts or systems resulting from unauthorized modiﬁcations made to this product.

Disclaimer of implied warranties; limitation of remedies

Customer’s sole and exclusive remedy under this limited warranty shall be product repair as provided herein.

Implied warranties, including warranties of merchantability or ﬁtness for a particular purpose, are limited to

one year or the shortest period allowed by law. Sears shall not be liable for incidental or consequential

damages. Some states and provinces do not allow the exclusion or limitation of incidental or consequential

damages, or limitation on the duration of implied warranties of merchantability or ﬁtness, so these exclusions

or limitations may not apply to you.

This warranty applies only while this appliance is used in the United States or Canada.

This warranty gives you speciﬁc legal rights, and you may also have other rights which vary from state to state.

Sears Brands Management Corporation, Hoﬀman Estates, IL 60179

Sears Canada Inc., Toronto, Ontario, Canada M5B 2C3

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES

Download from Www.Somanuals.com. All Manuals Search And Download.

Indesit Oven FI 52 CB IB User Manual
Insignia Model Vehicle LE 37MY83 User Manual
Intel Switch 130T User Manual
Intel TV Mount A31032 001 User Manual
IRiver MP3 Player HP 120 User Manual
Janome Sewing Machine 38580802 User Manual
JVC Flat Panel Television AV 27FA44 User Manual
Kawasaki Cordless Saw 840067 User Manual
Kenwood Car Satellite Radio System TK 940 User Manual
Kenwood Stereo Amplifier KM X1 User Manual