FM MODULATOR
KCA-20FM
INSTRUCTION MANUAL
0020-0403-KCA20FM INST
• Do not open the unit.
Please read this Instruction Manual thoroughly
before installing your KCA-20FM.
• Do not install the unit where it will be exposed to high
levels of humidity, moisture, or dust.
Box Contents
• 1 x KCA-20FM FM Modulator
• When replacing a fuse, use only a new one with the
proper rating. Using
a
fuse with the wrong
rating may cause the unit to malfunction.
• 1 x Toggle Switch
• To prevent a short circuit when replacing a fuse, first
deactivate the unit by flipping the toggle switch to the
OFF position (see page 4).
If anything is missing or damaged, notify your
dealer immediately. If your KCA-20FM was shipped
to you directly, notify your shipper immediately.
• When drilling holes to mount the unit, make sure not to
damage wiring or other systems on the other side.
Safety precautions
• This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless they are
expressly approved in the instruction manual. The user
could lose the authority to operate this equipment if an
unauthorized change or modification is made.
Caution
Take the following precautions to keep the unit in proper
working order:
• Be sure the unit is connected to a 12V DC power supply
with a negative ground connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
©2003 Kenwood USA Corporation. All rights reserved.
Installation
1. Select a location to mount the KCA-20FM. Ensure that the wires do not become entangled in the driver’s or
passenger’s feet.
2. Use double-stick tape or screws to attach the KCA-20FM to the mounting surface.
Note: If using screws, make sure that they do not damage wiring or other systems on the other side of the
mounting surface.
3. Connect the wires according to the diagram on the facing page.
• Connect the supplied toggle switch on the +12V (red) line, between the fuse and the vehicle’s battery.
• Mount the toggle switch in a location that is easily accessible to the driver
4. Use an audio cable to connect the KCA-20FM to the connected source’s left and right audio outputs
Adjusting the output level
If there is noticeable distortion when listening to the connected
source component, reduce the KCA-20FM’s output level by
rotating the Level Adjustment Wheel that is visible on the side
of the unit.
KCA-20FM Connections
Adjusting the Output Level
2
3
KCA-20FM Instruction Manual
KCA-20FM Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
KCA-20FM
Bottom of Modulator
Download from Www.Somanuals.com. All Manuals Search And Download.
|