BL760 series
BL770 series
Download from Www.Somanuals.com. All Manuals Search And Download.
G
Use your blender for soups, drinks,
pâtés, mayonnaise, breadcrumbs,
biscuit crumbs, chopping nuts and
crushing ice. Use your mill (if
supplied) for milling herbs, nuts,
coffee beans, spices and purées.
don’t accidentally unscrew the
goblet or mill jar from the blade
assembly.
G
G
Never run the blender empty.
Never blend more than the
maximum capacity stated in the
recommended speed chart.
To ensure long life of your blender
and mill, do not run it for longer than
60 seconds.
Smoothie recipes - never blend
frozen ingredients that have formed
a solid mass during freezing, break it
up before adding to the goblet.
Don’t use the blender as a storage
container. Keep it empty before and
after use.
before using your Kenwood
appliance
Read these instructions carefully and
retain for future reference.
Remove all packaging and any
labels.
G
G
G
G
G
Wash the parts: see ‘care and
cleaning’.
G
safety
G
G
G
Always use the blender on a secure,
dry level surface.
Never place this appliance on or
near a hot gas or electric burner or
where it could touch a heated
appliance.
Switch off and unplug:
G
G
G
before fitting or removing parts;
when not in use;
before cleaning.
G
Never fit the blade unit to the
power unit without the
blender goblet or mill jar
fitted.
Always unplug the appliance before
putting your hands or utensils in the
goblet.
Always take care when handling the
blade assembly and avoid touching
the cutting edge of the blades when
cleaning.
Only operate the blender with the lid
in place.
G
G
Misuse of your blender can result in
injury.
G
G
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
instructions.
G
G
G
G
G
G
Only use the goblet with the blade
assembly supplied.
Never let the power unit, cord or
plug get wet.
Never use a damaged appliance.
Get it checked or repaired: see
‘service and customer care’.
Never use an unauthorised
attachment.
Liquids should be allowed to cool to
room temperature before blending.
Never leave the appliance
unattended when it is operating.
When removing the blender or mill
from the power unit:
G
G
G
G
G
The maximum rating is based on the
attachment that draws the greatest
load. Other attachments may draw
less power.
before plugging in
G
Make sure your electricity supply is
the same as the one shown on the
underside of the appliance.
G
wait until the blades have
completely stopped;
Download from Www.Somanuals.com2. All Manuals Search And Download.
Important - UK only
The wires in the cord are coloured
as follows:
to use your blender
1 Fit the sealing ring ብ to the blender
G
blade unit ቦ marked
– ensuring
Blue = Neutral
the seal is located correctly in the
grooved area.
Leaking will occur if the seal
is damaged or incorrectly
fitted.
Brown = Live.
The appliance must be protected by
a 13A approved (BS1362) fuse.
G
G
G
Note:
For non-rewireable plugs the fuse
cover MUST be refitted when
replacing the fuse. If the fuse cover
is lost then the plug must not be
used until a replacement can be
obtained. The correct fuse cover is
identified by colour and a
replacement may be obtained from
your Kenwood Authorised Repairer
(see Service).
2 Clip the blade unit ቦ into the base
ቧ.
3 Screw the blade assembly onto the
goblet – ensuring the blade
assembly is fully tightened.
4 Put your ingredients into the goblet.
Never blend more than 1.6
litres or more than 1 litre for
frothy liquids like milkshakes.
5 Fit the filler cap to the lid.
6 Fit the lid by pushing down until
secure.
7 Place the blender onto the power
unit.
The appliance won’t work if
the blender is incorrectly
fitted.
G
If a non-rewireable plug is cut off it
must be DESTROYED
IMMEDIATELY. An electric shock
hazard may arise if an unwanted
non-rewireable plug is inadvertently
inserted into a 13A socket outlet.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
G
G
8 Plug in and the 4 pre-program
buttons will light up.
9 Choose one of the following options:
G
Select one of the 4 pre-programmed
buttons (refer to the function selector
chart). When the required program
button is pressed the lights on the
other 3 buttons will go out. The
blender will switch off automatically
at the end of the pre-set time. If you
wish to stop before the pre-set time,
press the selected program button
again.
key
blender
ቢ
ባ
ቤ
ብ
ቦ
ቧ
ቨ
ቩ
ቪ
ቫ
filler cap
lid
goblet
blender sealing ring
blender blade unit
base
speed + pulse control
pre-programmed buttons
power unit
cord storage
mill (if supplied)
mill jar
mill sealing ring
mill blade unit
mill base
G
Select speed 1 (low) to 5 (High) by
turning the speed control. At the end
of blending return the speed control
to “0” before removing the blender.
G
(P) Pulse – operates the motor in a
start/stop action. The pulse will
operate for as long as it is held in
position.
ቭ
ቮ
ቯ
ተ
ቱ
mill lid
Download from Www.Somanuals.com3. All Manuals Search And Download.
G
NOTE: The pre-program lights will
flash under the following
circumstances
When making mayonnaise, put all
the ingredients, except the oil, into
the blender. Remove the filler cap.
Then, with the appliance running,
add the oil slowly through the hole in
the lid.
Thick mixtures, e.g. pâtés and dips,
may need scraping down. If the
mixture is difficult to process, add
more liquid.
G
G
The power unit is plugged in but the
goblet is not fitted to the power unit.
The goblet is removed from the
power unit without switching the
speed control to “0”.
The power unit will not operate until
the control is turned to “0” and a
speed is reselected.
G
G
G
hints
To blend dry ingredients - cut into
pieces, remove the filler cap, then
with the machine running, drop the
pieces down one by one. Keep your
hand over the opening. For best
results empty regularly.
pre-program setting speed chart
During operation of the pre-program settings a change in speed
may be noted - this is normal
pre-program
setting
pre-set
operating
time
usage
max qty
Drinks and cocktails
1.6 litres
1 litre
Frothing milk and milkshakes
Smoothie drinks
1 litre liquid 60 seconds
Place the fresh fruit and liquid
ingredients in first (includes
yoghurt, milk and fruit juices).
Then add ice or frozen ingredients
(includes frozen fruit, ice or
ice cream)
Stock based soups
Soups using milk
1.6 litres
1 litre
30 seconds
Liquids should be allowed to cool to room temperature
before blending.
Note: Slow start when program selected.
Dips, fruit and vegetable purées
(add liquid if difficult to process).
200g
60 seconds
Mayonnaise
1 egg
150 mls oil
Ice Crushing
Automatic pulsing action
8 cubes
150g
30 seconds
Download from Www.Somanuals.com4. All Manuals Search And Download.
7 After milling, you can replace the
blade assembly with the mill lid.
to use your mill (if supplied)
1 Put your ingredients into the jar.
(Refer to the mill recommended
usage chart).
hints
G
For optimum performance when
processing spices we recommend
that you do not process more than
50g at a time in the mill.
2 Fit the sealing ring ቮ into the mill
blade unit marked
– ensuring the
seal is located correctly in the
grooved area.
G
Whole spices retain their flavour for a
much longer time than ground
spices so it is best to grind a small
quantity fresh at a time to retain the
flavour.
To release the maximum flavour and
essential oils whole spices are best
roasted prior to milling.
G
Ensure that the seal is fitted
correctly.
3 Then clip the blade unit ቯ into the
mill base ተ.
4 Turn the mill blade assembly upside
down. Lower it into the jar, blades
down. Turn in a clockwise direction
to lock.
5 Place the mill onto the power unit.
6 Select a speed or use the pulse
control. (Refer to the mill
G
G
Herbs are best chopped when clean
and dry.
recommended usage chart).
mill recommended usage chart
Ingredients
Nuts
Max Qty
50g
Speed
Operating time
10 seconds
5
Coffee Beans
50g
5
30 seconds
Uncooked Meat
Beef Steak - cut into 2 ⁄2 cm cubes
Herbs
100g
Pulse
5 seconds
1
10g
5
5
5 seconds
Baby Food & Fruit Purees
100g
50g
30 seconds
30-60 seconds
Spices - black peppercorns,
cardamom seeds, cumin seeds,
coriander seeds, fennel seeds and
whole cloves
G
Store excess cord in the storage
area at the back of the power
unit ቫ.
care and cleaning
G
Always switch off, unplug and
dismantle before cleaning.
Empty the goblet before unscrewing
it from the blade unit.
Don’t immerse the blade unit
in water.
The blender goblet and mill jar can
be washed in your dishwasher.
blade assembly
G
1 Unscrew the blender or mill base
from the goblet. Then remove the
blade unit by pushing up from
underneath.
Care should be taken when
removing the blade unit from
the blender or mill base.
G
G
G
power unit
G
Wipe with a damp cloth, then dry.
G
Don’t immerse the power unit in
water.
Download from Www.Somanuals.com5. All Manuals Search And Download.
2 Remove and wash the sealing ring.
3 Don’t touch the sharp blades –
brush them clean using hot soapy
water, then rinse thoroughly under
the tap. Don’t immerse the
blade unit in water.
4 Leave to dry upside down.
IMPORTANT INFORMATION FOR
CORRECT DISPOSAL OF THE
PRODUCT IN ACCORDANCE
WITH EC DIRECTIVE
other parts
Wash by hand, then dry.
2002/96/EC.
service and customer
care
At the end of its working life, the product
must not be disposed of as urban
waste.
It must be taken to a special local
authority differentiated waste collection
centre or to a dealer providing this
service.
G
If the cord is damaged it must, for
safety reasons, be replaced by
KENWOOD or an authorised
KENWOOD repairer.
UK
Disposing of a household appliance
separately avoids possible negative
consequences for the environment and
health deriving from inappropriate
disposal and enables the constituent
materials to be recovered to obtain
significant savings in energy and
resources. As a reminder of the need to
dispose of household appliances
separately, the product is marked with
a crossed-out wheeled dustbin.
If you need help with:
using your appliance or
servicing, spare parts or repairs (in or
out of guarantee)
టcall Kenwood customer care on 023
9239 2333. Have your model
number (ie BL760 or BL770)
and date code (4 digit code
ie 9T03) ready. They are on the
underside of the power unit.
G
G
G
spares and attachments
టcall 0870 2413653.
guarantee (uk only)
G
other countries
If your blender goes wrong within
one year from the date you bought
it, we will repair it (or replace it if
necessary) free of charge provided:
you have not misused, neglected or
damaged it;
Contact the shop where you bought
your appliance.
G
Designed and engineered by
G
Kenwood in the UK.
G
Made in China.
G
it has not been modified (unless by
Kenwood);
G
it is not second-hand;
G
it has not been used commercially;
G
you have not fitted a plug incorrectly;
and
G
you supply your receipt to
show when you bought it.
This guarantee does not affect your
statutory rights.
Download from Www.Somanuals.com6. All Manuals Search And Download.
Head Office Address:
Kenwood Limited, New Lane, Havant, Hampshire PO9 2NH, UK
Designed and engineered by Kenwood in the UK
19564/1
Made in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|