SPECIFICATIONS
Model
C-T1421
C-T2021
AC Power Input:
110V-240V 50Hz/60Hz (Rating), 100V-260V 50Hz/60Hz (Operating)
AC Power Consumption:
TV Color System:
Picture Tube:
44 Watts
70 Watts
PAL-M, PAL-N, NTSC-M
33.6 cm (measured diagonally)
48 cm (measured diagonally)
Audio Power Output Rating: 0.75+0.75 Watts (monaural)
1.5 + 1.5. Watts (monaural)
For models:
C-T1421
Speaker:
Input:
10.8 cm x 4.5 cm Full Range, 8 ohm x 2
10.8 cm x 4.5 cm Full Range, 4 ohm x 2
Video: 1.0Vp-p 75 ohm
Audio: 300 mV, 47K ohm
3.5 mm ø x 1
EARPHONE jack:
Tuner Type:
C-T2021
COLOR TELEVISION
USER'S GUIDE
181 Channel, Quartz PLL Frequency Synthesized
Infrared, Direct Access, 2 x AAA batteries
Remote Control:
Receiving Channels:
VHF
2-13
UHF
CATV
14-69
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
Antenna Input Impedance:
75 Ohm (VHF/UHF/CATV) Coaxial Input
Dimensions:
Weight:
46 cm (W) x 36.3 cm (D) x 31.8 cm (H) 60 cm (W) x 48 cm (D) x 44.6 cm (H)
9.5 kg
17.5 kg
ACCESSORIES:
Remote Control
AAA Batteries x 2
300-75 ohm Matching Transformer
Telescopic Antenna (C-T1421 only)
Specifications are subject to change without notice.
POWER
1
4
7
0
2
5
3
6
9
8
QUICK VIEW
CALL
SLEEP
MUTING
CH
VOL
VOL
MENU
ENTER
CH
SET
–
+
RESET
POWER
VIDEO
—
AV2 IN
—
AUDIO
EARPHONE
–
VOLUME
+
–
CHANNEL
+
TV/CAP/
TEXT
STAND BY ON TIMER
TV/VCR
CH. 1/2
–
SET
+
ENTER
RESET
ON/
OFF
MENU
VICTOR COMPANY OF JAPAN LIMITED
IMPORTANT NOTE TO THE CUSTOMER:
In the space below, enter the serial number for your
television (located on the rear of the television cabinet).
Staple your sales receipt or invoice to the inside cover of this guide.
Keep this user's guide in a convenient place for future reference.
Keep the carton and original packaging for future use.
Serial Number
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
FEATURES
• 181 Channel Tuner - The tuning system is capable of receiving all 68 VHF/UHF standard broadcast channels that are
available in your area. When operating on a cable system, it can tune to the standard VHF channel frequencies plus
up to 113 cable channel frequencies. The actual number of channels received depends upon channel reception in
your area or your cable system.
• On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or Portuguese.
• ON/OFF Timer - Allows you to automatically turn on or off your TV at a set time.
• Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn off
automatically.
• Picture Control Adjustments - The On-Screen display allows precise remote control adjustment of
BRIGHTNESS, COLOR, CONTRAST, SHARPNESS, TINT.
• Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing impaired
viewers.
POWER
1
1
2
5
3
6
9
2
4
7
0
8
10
3
4
QUICK VIEW
CALL
• Front Video Input Jacks - A VCR or other video device may be hooked up.
• Auto Voltage - This TV can be used from a household 110V-240V, 50/60Hz.
SLEEP
MUTING
11
12
CH
VOL
VOL
5
LOCATION OF CONTROLS
FRONT
BACK
MENU
ENTER
CH
SET
6
7
–
+
13
14
15
RESET
8
9
TV/CAP/
TEXT
TV/AV
CH. 1/2
A
V1 IN
POWER
VIDEO
—
AV2 IN
—
AUDIO
EARPHONE
–
VOLUME
+
–
CHANNEL
+
VIDEO
AUDIO
STAND BY ON TIMER
–
SET
+
ENTER
RESET
ON/
OFF
MENU
9
10 11
1. POWER Button - Press to turn the TV on or off when
the TV is standby mode.
2. 10-key pad - Allows direct access to any channel.
3. QUICK VIEW Button - Switches between the present
channel and the last channel selected.
8. RESET- Button - Press to reset the On-Screen picture
adjustments, clock setting and ON/OFF timer setting.
9. TV/AV Button - Switches between the TV and external
input sources.
10. CALL - Displays the current status time, channel (or
Input), the present settings on the TV screen.
11. MUTING Button - Press to turn off the sound. Press
again to turn the sound back on.
POWER
VIDEO
—
AV2 IN
—
AUDIO
EARPHONE
–
VOLUME
+
–
CHANNEL
+
STAND BY ON TIMER
–
SET
+
ENTER
RESET
ON/
OFF
MENU
4. SLEEP TIMER Button - Sets the TV to turn off auto-
matically after up to 120 minutes.
1
2
3
4
5
6
7
8
5. CH
/
Buttons - Press the
button to change to
a higher numbered channel set into memory. Press the
button to change to a lower numbered channel set
into memory.
12. VOL
or the
/
Buttons - Press the
button to decrease the volume level.
button to increase,
1. POWER Button - Press the POWER button on the front
panel to put the TV into standby mode.
2. VOLUME +/– Buttons - Press to raise or lower the
volume of the sound.
(MENU Buttons) - Press the both buttons to display the
On-Screen menu function.
(SET +/ – Buttons) - Press to select the desired setting
during On-Screen operations.
3. CHANNEL +/– Buttons - Press to select a higher or
lower numbered channel set into memory.
(Power on function) - You can also turn on the TV by
pressing the CHANNEL + or – button on the front panel
when the TV is in standby mode.
4. STAND BY Indicator - This indicator lights up showing
the unit is in standby mode.
5. ON TIMER Indicator - This indicator lights up when ON
TIMER program is turned ON.
6. Remote Sensor - Signals from the Remote Control unit
are received here.
7. AV 2 IN Jacks (Front) - Audio and video signal cables
from an external source can be connected here.
8. EARPHONE Jack - Plug an earphone with an 1/8
miniplug into this jack for listening.
13. ENTER Button - Press to enter selected setup.
14. TV/CAP/TEXT (Closed Caption) Button - Switches
between Caption, Text and TV modes for Closed-
Captioned programs.
15. CH. 1/2 Button - Switches between Channel 1 and
Channel 2 in the Closed Caption mode.
(Power on function) - You can also turn on the TV by
pressing the CHANNEL
or
button on the remote
control when the TV is in standby mode.
6. MENU Button - Press to display the On-Screen menu
function.
7. SET +/– Buttons - Press to select the desired setting
during On-Screen operations.
9. AC Power Cord - Connect to the AC outlet.
10. VHF/UHF IN (ANT) Jack - Connect a VHF/UHF
antenna or CATV cable to this jack.
(ENTER Button) - Press to enter or select information
for On-Screen operations.
(RESET Button) - Press to reset the On-Screen picture
adjustments to their factory preset positions.
11. AV 1 IN Jacks (Rear) - Audio and video signal cables
from an external source (ex. VCR) can be connected
here.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
ANTENNA/CATV CONNECTIONS
REMOTE CONTROL
(CONTINUED)
BATTERY INSTALLATION
BATTERY PRECAUTIONS
1. Open the battery compartment cover in the direction
of the arrow.
The precautions below should be followed when using
batteries in this device:
Combination VHF/UHF Antenna
Single 75 ohm Cable
This television has an extended
tuning range and can tune most
cable channels without using a
cable company supplied
converter box. Some cable
companies offer "premium pay
channels" in which the signal is
scrambled. Descrambling these
signals for normal viewing
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the
batteries as indicated in the battery compartment.
Reversed batteries may cause damage to the device.
To avoid a potential short circuit, insert the “–” end first.
3.Do not mix different types of batteries together (e.g.
Alkaline and Carbon-zinc) or old batteries with fresh
ones.
300 ohm Twin-lead Wire
Take off the Splitter
Splitter
requires the use of a descrambler
300-75 ohm
Matching Transformer
UHF Antenna
device which is generally
A
V1
IN
V
I
D
E
O
AUDIO
provided by the cable company.
2. Install two “AAA” (penlight size) batteries, paying
attention to the polarity diagram in the battery
compartment.
300 ohm Twin-lead Wire
4.If the device is not to be used for a long period of time,
remove the batteries to prevent damage or injury from
possible battery leakage.
Indoor Antenna
VHF Antenna
A single pole antenna is supplied with the unit (C-T1421 only),
insert the antenna holder into the mounting hole on the back of
the cabinet until it locks into place. Attach the antenna plug to
the antenna jack. Adjust the length and angle of the antenna
rod to receive the best possible picture.
Single 75 ohm Cable
5.Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
300 ohm Twin-lead Wire
Combiner
(not supplied)
Separate VHF/UHF Antennas
300-75 ohm
Incoming CATV
Matching Transformer
Connect the 75 ohm Cable from the VHF antenna and the UHF
antenna Twin-lead to a combiner (not supplied). Attach the
Combiner to the Antenna Jack.
3. Replace the compartment cover.
NOTE:If your VHF antenna has a Twin-lead Wire, use the 300-
75 ohm Matching Transformer, then connect the Transformer to
the Combiner.
Converter/Descrambler
Converter/Descrambler
A
B
Splitter
A/B Switch
For Subscribers to Basic Cable TV Service
For basic cable service not requiring a Converter/Descrambler
box, connect the CATV 75 ohm Coaxial Cable directly to the
Antenna Jack on the back of the television.
Combination VHF/UHF Antenna (Single 75 ohm
Cable or 300 ohm Twin-lead Wire)
Connect the 75 ohm cable from a combination VHF/UHF
antenna to the Antenna Jack. If your combination antenna has
a 300 ohm Twin-lead Wire, use the 300-75 ohm Matching
Transformer.
For Subscribers to Scrambled Cable TV Service
If you subscribe to a cable service which requires the use of a
Converter/Descrambler box, connect the incoming cable to the
Converter/Descrambler box and connect the output of the box
to the Antenna Jack on the back of the television. Follow the
connections shown left. Set the television to the output of the
Converter/Descrambler box (usually channel 3 or 4) and use
the Converter/Descrambler box to select channels.
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
Combination VHF/UHF Antenna (Separate VHF and
UHF 300 ohm Twin-leads)
Connect the UHF Twin-lead Wire to a Combiner (not supplied).
Connect the VHF Twin-lead to the 300-75 ohm Matching
Transformer. Attach the Transformer to the Combiner. Attach the
Combiner to the Antenna Jack.
For Subscribers to Unscrambled Basic Cable with
Scrambled Premium Channels
If you subscribe to a cable service in which basic cable
channels are unscrambled and premium channels require the
use of a Converter/Descrambler box, you may wish to use a
two-set signal splitter (sometimes called a "two-set coupler")
and an A/B Switch box from the cable installer or an electronics
supply store. Follow the connections shown left. With the switch
in the "B" position, you can directly tune any nonscrambled
channels on your TV. With the switch in the "A" position, tune
your TV to the output of the Converter/Descrambler box (usually
channel 3 or 4) and use the box to tune scrambled channels.
15 FEET
30˚
30˚
NOTES: • When there is an obstacle between the TV and the transmitter, the transmitter may not operate.
• When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the
Remote sensor of the TV, the remote operation may be unstable.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING LANGUAGE
CONNECTION TO OTHER EQUIPMENT
This TV can display the channel number, on-screen displays and picture adjustments on the screen in English, Spanish or
Portuguese.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially.
Select the language you prefer first, then proceed with the other menu options.
The exact arrangement you use to interconnect various video and audio components to the TV is dependent on the model
and features of each component. Check the User’s Guide provided with each component for the location of video and audio
inputs and outputs.
The connection diagrams in the following are offered as suggestions. You may need to modify them to accommodate your
particular assortment of components. The diagrams are intended to show component video and audio interconnections only.
Press the MENU button.
M E N U
Press the SET + or – button
3
1
2
LANGUAGE / IDIOMA
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE IDIOMA
COLOR AUTO
until the " " indicator points to
the desired language: English
(ENGLISH), Spanish
(ESPAÑOL) or Portuguese
(PORTUGUES), then press the
ENTER button.
Press the TV/AV button to select the AV mode to use the TV as a monitor.
Operate your VCR as usual.
/
Press the SET + or – button to
select the LANGUAGE mode,
then press the ENTER button.
⟩
⟨
+ / — / ENTER / MENU
⟩
⟨
+ / — / ENTER / MENU
TV/AV SELECTION
If you connect the TV to VCR, camcorder, TV game or DVD you can select by pressing the TV/AV button.
TV
AV 1
AV 2
AV1
Press the MENU button.
Press the TV/AV button repeatedly to select the desired
mode.
4
NOTE:
If Spanish or Portuguese is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption
text will not be affected by the language selection.
An indication of input source will display
on the screen for 4 seconds.
SETTING CLOCK
1. To connect the TV to a VCR
(ex. Use AV 1 IN jacks to connect it.)
3. To connect the TV to a camcorder
To playback from the camcorder, connect the camcorder
to the TV as shown.
You must set the time manually for CALL and ON/OFF TIMER.
Rear of TV
Front of TV
VCR
Press the MENU button.
Press the SET + or – button to set the minute.
If you want to change the hour, press the
RESET button.
1
2
4
5
AV1 IN
VIDEO
—
AV2 IN
—
AUDIO
EARPHONES
STAND BY ON TIMER
VIDEO
AUDIO
M E N U
To Audio
Video OUT
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE IDIOMA
COLOR AUTO
VIDEO
AUDIO
To Audio/
Video OUT
Press the SET + or – button
until the indicator next to
"CLOCK SET" begins to flash,
then Press the ENTER button.
VIDEO
(not supplied)
AUDIO
CLOCK SET
10 : 00
/
(not supplied)
⟩
⟨
+ / — / ENTER / MENU
⟩
⟨
+
/
—
/
ENTER
/
RESET MENU
/
Press the ENTER button.
• Select “AV 1” by pressing the TV/AV button to display
the VCR picture.
• Select “AV 2” by pressing the TV/AV button to display
the camcorder picture.
NOTES:
Press the SET + or –
button to set the hour, then
press the ENTER button.
3
• After a power failure, disconnection of the power
plug or turning the TV power off by pressing the
POWER button on the front panel, the time
display will be lost. In this case, set present time
again.
CLOCK SET
0 : 00
2. To connect the TV to a TV Game
The TV can also be used as a display device for many
video games. However, due to the wide variety of
different types of signal generated by these devices and
subsequent hook-up variations required, they have not
all been included in the suggested connection diagrams.
You'll need to consult each component's Owner's
Manual for additional information.
⟩
⟨
+
/
—
/
ENTER
/
RESET
/
MENU
• When you set the minute, you can change in 10-
minutes by holding down the SET + or – button.
COLOR SYSTEM
The color system is automatically selected, but if the picture is not clear or no color appears, select the color system
manually.
To Audio/Video OUT
Front of TV
VIDEO
—
AV2 IN
—
AUDIO
EARPHONES
STAND BY ON TIMER
Press the MENU button.
TV GAME
1
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
Press the SET + or – button to select
the “COLOR” option then press the
ENTER button.
2
LANGUAGE IDIOMA
/
COLOR AUTO
(not supplied)
⟩
⟨
+ / — / ENTER / MENU
Press the ENTER button to select the
desired COLOR SYSTEM.
3
4
• Select “AV 2” by pressing the TV/AV button to display
the TV GAME picture.
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE IDIOMA
COLOR PAL-M
AUTO
PAL-N
PAL-M
NTSC
/
⟩
⟨
+ / — / ENTER / MENU
Press the MENU button.
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
TV BASIC OPERATION
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set
into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into
the TV's memory. In addition to normal VHF and UHF
channels, this TV can receive up to 113 Cable TV channels.
To use this TV with an antenna, set the TV/CATV menu
option to the TV setting. When shipped from the factory, this
menu option is in the CATV setting.
AUTOMATIC CHANNEL MEMORY
QUICK VIEW button
Returns to the channel viewed just before the channel
currently onscreen.
1
Press the POWER button on the front panel to put the
TV into standby mode. The STAND BY indicator will
light.
Press the MENU button.
M
E
N
U
1
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE
COLOR AUTO
Press the SET + or – button until the
/
IDIOMA
2
Press the POWER button on the remote control to turn
on the TV.
You can also turn on the TV by pressing the CHAN-
NEL UP or DOWN button on the front panel or on the
remote control when the TV is in standby mode.
2
CH 012
CH 007
indicator next to "CH SET UP" begins
to flash, then press the ENTER
button.
⟩
⟨
+
/
—
/
ENTER MENU
/
TV/CATV SELECTION
Press the SET + or – button until the
indicator next to "AUTO CH
CH SET UP
TV CATV
AUTO CH MEMORY
ADD DELETE
3
The VOLUME can be adjusted to a desired level by
Press the MENU button.
3
1
2
MUTING button
/
MEMORY" begins to flash, then press
the ENTER button. The TV will begin
memorizing all the channels available
in your area.
pressing the VOL (VOLUME)
Adjust the volume level by
or
button.
MUTING
The MUTING button instantly turns the
volume down completely when you
press it.
Press MUTING button and the volume
level will instantly go to zero. To restore
⟩
⟨
+
/
—
/
ENTER MENU
/
M
E
N
U
Press the SET + or – button until the
indicator next to "CH SET UP"
begins to flash, then press the
ENTER button.
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
pressing the VOL
or
button. The volume level will be
indicated on the screen by
LANGUAGE
/
IDIOMA
COLOR AUTO
⟩
ENTER / MENU
⟨
+
/
—
/
Press the MENU button.
4
green bar. As the volume level
increases, so do the number of
bar. If the volume decreases,
the volume to its previous level, press MUTING button again.
VOLUME
32
Press the SET + or – button until the
indicator next to "TV/CATV" begins
to flash.
3
TO ADD/DELETE CHANNELS
the number of green bar also decreases.
10-key pad (0-9)
Press the MENU button.
M
E
N
U
1
CH SET UP
TV CATV
Press these buttons to select a channel. The channel
number will appear on the upper right corner of the TV
screen. If an invalid channel number is selected, the display
will revert to the original channel.
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
The sound level will be indicated on the TV screen by
green bars and a number. As the sound level in-
creases, so do the number of bars and the number on
the screen. The same is true for decreasing the level.
AUTO CH MEMORY
ADD DELETE
/
Press the SET + or – button until the
LANGUAGE
COLOR AUTO
/
IDIOMA
2
Press the ENTER button to select
the TV or CATV mode. The arrow
indicates the selected mode.
4
5
indicator next to "CH SET-UP" begins
to flash, then press the ENTER
button.
⟩
⟨
+
/
—
/
ENTER MENU
/
⟩
ENTER MENU
⟨
+
/
—
/
/
TV Mode Direct Channel Selection
Set the TV/CATV menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CATV setting. See "TO MEMORIZE
CHANNELS".
Press the MENU button.
4
5
When the TV/CATV menu option is in the TV position, all
channels can be instantly selected by using two buttons.
(For example, to select channel 2, press "0", then "2". If you
press only "2", channel selection will be delayed for a few
seconds). For channels 10 and above, press the 2 digits in
order.
Press the SET + or – button until the
CH SET UP
TV CATV
AUTO CH MEMORY
ADD DELETE
3
indicator next to "ADD/DELETE"
begins to flash, then press the
ENTER button.
/
NOTE: Contact your cable company to determine the
⟩
⟨
+
/
—
/
ENTER MENU
/
type of cable system used in your area.
Select the desired channels to be
added or deleted using the 10-key
TV
-
-
VHF/UHF channels
CABLE TV channels
4
CATV
pad (0-9) or the CH + or – button.
CATV Mode Direct Channel Selection
When the TV/CATV menu option is in the CATV position,
channels can be selected as follows:
Press the ENTER button to select ADD or DELETE.
CH (CHANNEL)
Press and release the CH
(CHANNEL) or button.
and
buttons
5
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press the CH + or –
button if you wish to ADD the unmemorized channel.
The channel indicator will change from red to green
when a channel is added and the channel will be
memorized. If a memorized channel was selected (step
4), the channel indication will be green.
CH 012
CH. 1-9
Press "0" twice, then 1-9 as needed.
Example, to select channel 2, press
"002".
The channel automatically stops
at the next channel set into
memory.
CH. 10-12
CH. 13-99
Press "0", then remaining 2 digits.
Example, to select channel 12, press
"012".
Press the 2 digits in order.
Example, to select channel 36, press
"36".
For proper operation, before selecting channels,
they should be set into the TV's memory.
See "TO MEMORIZE CHANNELS".
Press the CH + or – button if you wish to DELETE the
channel from memory. The channel
indicator will change from green to
red when a channel is deleted.
Repeat Steps 4 and 5 for each
channel to be added or deleted.
ADD
CH 012
CH. 100-125 Press the 3 digits in order.
Example, to select channel 120, press
⟩
⟨
+
/
—
/
0
-9 / ENTER / MENU
"120".
Press the MENU button after adding or deleting all of
the desired channels, to return to normal TV viewing.
6
NOTE: If the station being viewed stops broadcasting, the
TV will automatically shut off after 15 minutes.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SLEEP TIMER button
CLOSED CAPTION
Text: The Text Closed Caption Mode will usually fill 1/2 of
full screen with a programming schedule or other
The Sleep Timer can turn the TV off for you after you fall
asleep. Program it to work in intervals of 10 minutes, for
a total time of up to 120 minutes.
• To change the sleep timer setting:
Press the SLEEP button repeatedly until the display
turns to desired time.
• To cancel the sleep time:
Press the SLEEP button repeatedly until the display
turns to 0.
WHAT IS CLOSED CAPTIONING?
This television has the capability to decode and display
Closed Captioned television programs. Closed
Captioning will display text on the screen for hearing
impaired viewers or it will translate and display text in
another language.
information. After selecting a Closed Caption Mode, it will
stay in effect until it is changed, even if the channel is
changed. If the Captions signal is lost due to a commercial
or a break in the signal, the Captions will reappear when
the signal is received again. If the channels are changed,
the Captions will be delayed approximately 10 seconds.
The Captions will appear in places on the screen where
they will least interfere with the picture, usually on the
bottom of the screen. News programs will usually show
three-line Closed Captions which scroll onto the screen.
Most other shows provide two or three lined Captions
placed near the character who is speaking so the viewer
can follow the dialogue. Words in italics or underlined
describe titles, words in foreign languages or words
requiring emphasis. Words that are sung usually appear
enclosed by musical notes. For television programs
broadcasting with Closed Captions, look in your TV guide
for the Closed Captions symbol (CC).
SLEEP
120
TO VIEW CLOSED CAPTIONS
Press the TV/CAP/TEXT button on the remote control to
switch between normal TV and the two Closed Caption
Modes (Captions and 1/2 of Full Screen Text).
CALL button
Press the CALL button to display the current informations on the screen.
Captions: This Closed Caption Mode will display text on
the screen in English or another language (depending on
the setting of the Closed Captions CH. 1/2 button).
Generally, Closed Captions in English are transmitted on
Captions Channel 1 and Closed Captions in other
languages are transmitted on Captions Channel 2.
Press Once
Press Twice
Press 3 times
Channel No.
8 : 30
PAL-M
CH 012
CLOCK
Color System
CAPTION CH1
CAPTION CH1
Closed Caption*
Closed Caption*
• When activating the Closed Captioned Decoder, there will be a short delay before the Closed Captioned text appears
on the screen.
• Closed Captioned text is only displayed in locations where it is available.
Clear the current
informations**
This indication dose not appear when the Closed Capition is not active.
In the AV mode, “AV 1” or “AV 2” continues to display when there is no signal.
*
**
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed
Captioning, especially with live programs. This is because during live programs, captions are also entered live.
These transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and MUTING may not be seen or may
interfere with Closed Captions.
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may
appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use an
outdoor antenna.
PICTURE ADJUSTMENTS
You can adjust the settings for color, sharpness, con-
Press the SET + or – button to adjust the setting.
4
trast, brightness, tint (NTSC only) and component.
Press the MENU button.
1
+
–
increase brightness
increase contrast
be brilliant color
be greenish color
decrease brightness
decrease contrast
be pale color
BRIGHTNESS
CONTRAST
COLOR
TINT (NTSC only)
SHARPNESS
2
Press the SET + or – button
until the indicator next to
"PICTURE" begins to flash,
then press the ENTER button.
M E N U
CLOCK SET
ON/OFF TIMER
CH SET UP
be reddish color
PICTURE
LANGUAGE IDIOMA
/
makes picture clearer makes picture softer
COLOR AUTO
⟩
⟨
+ / — / ENTER / MENU
TO RETURN TO INITIAL SETTING
Press the RESET button while the picture adjusting mode
appears on the screen (except the adjusting component).
3
Press the ENTER button
repeatedly to select the
item you want to adjust.
BRIGHTNESS
0
NOTE: The on-screen display will disappear 6 seconds
after finishing an adjustment. The settings can
only be adjusted when they are displayed on
the TV screen.
⟩
⟨
+ / — / ENTER / RESET / MENU
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
TINT
(NTSC only)
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
ON/OFF TIMER
Before requesting service, please refer to the following chart for the symptom and possible solution.
ON TIMER SETTING
This feature allows you to have the TV automatically turn "ON" at predetermined time.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
If you program the "ON" timer once the timer will turn "ON" the TV daily at the same time and to the same channel.
If the power has been turned on at programmed time, the channel is changed to a programmed one.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
TV does not operate
Press the MENU button.
Press the SET + or – button
to set the minute, then press
the ENTER button.
1
2
5
ON/OFF TIMER
ON TIMER
7:00
CH012
CANCEL
CANCEL
Press the SET + or – button until
the indicator next to "ON/OFF
TIMER" begins to flash, then
press the ENTER button.
M E N U
• Station or CATV experiencing problems, tune to another station.
• Check sound adjustments (Volume and Muting).
• Check for sources of possible interference.
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
LANGUAGE IDIOMA
COLOR AUTO
OFF TIMER
0:00
•
You can change in 10-
minutes step by holding
down the SET + or –
button.
Poor sound or No sound
Poor picture or No picture
⟨
+ / — / ENTER / RESET / MENU
⟩
/
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
⟩
⟨
+ / — / ENTER / MENU
Press the SET + or – button until
the indicator next to "ON TIMER"
begins to flash, then press the
ENTER button.
3
4
ON/OFF TIMER
ON TIMER
Press the SET + or
–
6
• Check picture control adjustments.
ON/OFF TIMER
ON TIMER
0:00
CH012
button to set the channel,
then press the ENTER
button.
CANCEL
7:30
CH012
CANCEL
CANCEL
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Station signal is weak, reorient antenna to receive desired station.
• Check for sources of possible interference.
OFF TIMER
0:00
CANCEL
OFF TIMER
0:00
Poor reception on some channels
Poor color or no color
• You can set the channel
which is added in the
CH SET UP option.
⟩
⟨
+ / — / ENTER / RESET / MENU
⟩
⟨
+ / — / ENTER / RESET / MENU
Press the SET + or – button to set
the hour, then press the ENTER
button. If you want to change the
hour, press the RESET button.
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, reorient antenna.
• Check for sources of possible interference.
• Check the color system.
ON/OFF TIMER
ON TIMER
0:00
CH012
CANCEL
Press the SET + or –
button to select the
SET mode.
7
8
ON/OFF TIMER
ON TIMER
OFF TIMER
0:00
7:30
CH007
CANCEL
CANCEL
⟩
⟨
+ / — / ENTER / RESET / MENU
OFF TIMER
0:00
CANCEL
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
• CATV company is scrambling signal.
⟩
⟨
+ / — / ENTER / RESET / MENU
Picture wobbles or drifts
No CATV reception
Press the MENU button.
• Check antenna orientation.
NOTES:
• You cannot set the ON/OFF TIMER when the clock is not set.
• This TV will automatically turn off approximately 1 hour later after the ON TIMER turns on the TV unless any
buttons are pressed.
• To cancel the ON TIMER function:
• Check all CATV connections.
• Set TV/CATV menu option to the CATV mode.
• Station or CATV system problems, try another station.
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
To cancel ON TIMER in step 7 above press the SET + or – button to select the CANCEL mode.
Horizontal or diagonal bars on screen
No reception above channel 13
OFF TIMER SETTING
• Make sure TV/CATV menu option is in the appropriate mode.
• If using antenna, check UHF antenna connections.
This feature allows you to have the TV turn "OFF" automatically at a predetermined time.
If you program the OFF TIMER once, The TV will be automatically turned off at the same time daily.
• Batteries are weak, dead or inserted incorrectly.
• Remote is out of range, move closer to TV within (15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the Remote and the TV.
• Make sure the power cord is plugged in.
Press the SET + or –
button to set the hour,
then press the
Press the MENU button.
4
1
2
ON/OFF TIMER
ON TIMER
No Remote operation
TV shuts off
7:30
CH012
CANCEL
Press the SET + or – button until
the indicator next to "ON/OFF
TIMER" begins to flash, then
press the ENTER button.
M E N U
OFF TIMER
0:00
ENTER button.
CLOCK SET
ON/OFF TIMER
CH SET UP
PICTURE
CANCEL
If you want to change the
hour, press the RESET
button.
• No broadcast on station tuned.
• Sleep Timer is set.
• ON/OFF TIMER is set.
• Power interrupted.
⟩
⟨
+ / — / ENTER / RESET / MENU
LANGUAGE IDIOMA
/
COLOR AUTO
⟩
⟨
+ / — / ENTER / MENU
ON/OFF TIMER
ON TIMER
5
Press the SET + or –
button to set the minute
then press the ENTER
button.
• You can change in 10-
minutes step by holding
•
Approximately 1 hour has passed after the ON TIMER turns on and no button was
pressed (See page 14).
3
7:30
CH012
Press the SET + or – button
until the indicator next to "OFF
TIMER" begins to flash, then
press the ENTER button.
ON/OFF TIMER
ON TIMER
CANCEL
CANCEL
7:30
CH012
OFF TIMER
11:00
• TV station experiencing problems or program tuned is not closed captioned.
Try another channel.
• Check CATV connection or VHF/UHF antenna, reposition or rotate antenna.
• Press TV/CAP/TEXT button to turn on the closed caption decoder.
CANCEL
CANCEL
Closed - Caption is not activated.
OFF TIMER
0:00
⟩
⟨
+ / — / ENTER / RESET / MENU
⟩
⟨
+ / — / ENTER / RESET / MENU
down the SET + or – button.
• Select proper language in the menu options.
Display is not shown in your language.
ON/OFF TIMER
ON TIMER
Press the SET + or –
button to select the SET
mode.
6
7
7:30
CH012
CANCEL
CANCEL
OFF TIMER
11:30
⟩
⟨
+ / — / ENTER / RESET / MENU
Press the MENU button.
NOTES:
• If station being viewed stops broadcasting, the TV will automatically shut itself off after 15 minutes.
• To cancel the OFF TIMER function:
To cancel OFF TIMER, in step 7 above press the SET + or – button to select the CANCEL mode.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
|