Integra DVD Player DPC 52 User Manual
Contents  
Before Using Your DVD Changer  
2
DVD Changer  
Getting Started  
6
DPC-5.2  
Facilities and Connections 10  
Instruction Manual  
Basic Operation  
17  
20  
Advanced Operation  
Thank you for purchasing the Integra DVD  
Changer.  
Please read this manual thoroughly before  
making connections and turning on the  
power. Following the instructions in this manual  
will enable you to obtain optimum  
performance and listening enjoyment from  
your new DVD Changer. Please retain this  
manual for future reference.  
Function Setup  
Others  
30  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
This unit contains a semiconductor laser system and is classified as  
a “CLASS 1 LASER PRODUCT”. So, to use this model properly,  
read this Instruction Manual carefully. In case of any trouble,  
please contact the store where you purchased the unit. To prevent  
being exposed to the laser beam, do not try to open the enclosure.  
“CLASS 1 LASER  
PRODUCT”  
CAUTION:  
1. This unit is a CLASS 1 LASER PRODUCT and employs a  
laser inside the cabinet.  
VISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK  
FAILED OR DEFEATED. DO NOT STARE INTO BEAM.  
2. To prevent the laser from being exposed, do not remove  
the cover. Refer servicing to qualified personnel.  
CAUTION:  
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS  
OR ADJUSTMENTS OR PERFORMANCE OF  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
The laser is covered by a housing which prevents exposure during  
operation or maintenance. However, this product is classified as a  
Laser Product by CDRH (Center for Devices and Radiological  
Health) which is a department of the Food and Drug  
Administration. According to their regulations 21 CFR section  
1002.30, all manufactures who sell Laser Products must maintain  
records of written communications between the manufacturer,  
dealers and customers concerning radiation safety. If you have any  
complaints about instructions or explanations affecting the use of  
this product, please feel free to write to the address on the back  
page of this manual. When you write us, please include the model  
number and serial number of your unit.  
For Canadian model  
This class B digital apparatus complies with Canadian ICES-003.  
For models having a power cord with a polarized plug:  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH  
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
Modèle pour les Canadien  
Cet appareil numérique de la classe B est conforme à la norme  
NMB-003 du Canada.  
In compliance with Federal Regulations, the certification,  
identification and the period of manufacture are indicated on the  
rear panel.  
Sur les modèles dont la fiche est polarisee:  
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,  
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE  
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET  
POUSSER JUSQU’AU FOND.  
FCC INFORMATION FOR USER  
CAUTION:  
The user changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority to  
operate the equipment.  
NOTE:  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the FCC  
Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This  
equipment generates, uses and can radiate radio frequency energy  
and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be  
determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the  
following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from  
that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for  
help.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
1. Regional Restriction Codes (Region Number)  
8. Notes on Handling  
Regional restriction codes are built into DVD Changers and  
DVD-Video media for each sales region. If the regional code of  
the DVD Changer does not match one of the regional codes on  
the DVD-Video, playback is not possible.  
The regional number can be found on the rear panel of the DVD  
Changer.  
• When shipping the unit, use the original shipping carton and  
packing materials. For maximum protection, repack the unit  
as it was originally packed at the factory.  
• Do not use volatile liquids, such as insect spray, near the  
unit. Do not leave rubber or plastic products in contact with  
the unit for a long time. They will leave marks on the finish.  
• The top and rear panels of the unit may become warm after  
a long period of use. This is not a malfunction.  
• When the unit is not in use, be sure to remove the disc and  
turn off the power.  
• If you do not use the unit for a long period, the unit may not  
function properly in the future. Turn on and use the unit  
occasionally.  
1
(e.g.  
for Region 1)  
2. About This Manual  
This manual explains the basic procedures for operating the  
DVD Changer. Some DVD-Video discs do not support the full  
potential of the DVD technology. Your DVD Changer may  
therefore not respond to all operating commands. Refer to  
instruction notes on discs.  
9. To Obtain a Clear Picture  
A “ ” mark may appear on the TV screen during operation. It  
means that the operation is not permitted by the DVD Changer  
or the disc.  
The unit is a high technology, precision device. If the optical  
pick-up lens and disc drive parts are dirty or worn down, the  
picture quality becomes poor. To obtain a clear picture, we  
recommend regular inspection and maintenance (cleaning or  
parts replacement) every 1,000 hours of use depending on the  
operating environment. For details, contact your nearest dealer.  
3. Recording Copyright  
Recording of copyrighted material for other than personal use  
is illegal without permission of the copyright holder.  
4. Power  
WARNING  
10. Notes on Moisture Condensation  
Moisture condensation damages the unit.  
Please read the following carefully.  
BEFORE PLUGGING IN THE UNIT FOR THE FIRST  
TIME, READ THE FOLLOWING SECTION CAREFULLY.  
• What is moisture condensation?  
Moisture condensation occurs, for example, when you pour a  
cold drink into a glass on a warm day. Drops of water form  
on the outside of the glass. In the same way, moisture may  
condense on the optical pick-up lens inside the unit, one of  
the most crucial internal parts of the unit.  
The voltage of the available power supply differs according to  
country or region. Be sure that the power supply voltage of the  
area where the unit will be used meets the required voltage  
(e.g., AC 120 V, 60 Hz) written on the rear panel.  
5. Do not touch the unit with wet hands  
• Moisture condensation occurs in the following  
cases.  
– When you bring the unit directly from a cold place to a  
warm place.  
– When you use the unit in a room where you just turned on  
the heater, or a place where the cold wind from the air  
conditioner directly hits the unit.  
– In summer, when you use the unit in a hot and humid  
place just after you move the unit from an air conditioned  
room.  
Do not handle the unit or power cord when your hands are wet  
or damp. If water or any other liquid enters the case, take the  
unit to an authorized service center for inspection.  
6. Location of the unit  
• Place the unit in a well-ventilated location.  
Take special care to provide plenty of ventilation on all sides  
of the unit especially when it is placed in an audio rack. If  
ventilation is blocked, the unit may overheat and  
malfunction.  
• Do not expose the unit to direct sunlight or heating units as  
the unit’s internal temperature may rise and shorten the life  
of the pickup.  
• Avoid damp and dusty places and places directly affected by  
vibrations from the speakers. In particular, avoid placing the  
unit on or above one of the speakers.  
• Be sure the unit is placed in a horizontal position. Never  
place it on its side or on a slanted surface as it may  
malfunction.  
– When you use the unit in a humid place.  
• Do not use the unit when moisture condensation  
may occur.  
If you use the unit in such a situation, it may damage discs  
and internal parts. Remove the disc, connect the power cord  
of the unit to the wall outlet, turn on the unit, and leave it for  
two or three hours. After a few hours, the unit will have  
warmed up and evaporated any moisture. Keep the unit  
connected to the wall outlet and moisture condensation will  
seldom occur.  
• When you place the unit near a TV, radio, or VCR, the  
playback picture may become poor and the sound may be  
distorted. In this case, place the unit away from the TV,  
radio, or VCR.  
7. Care  
From time to time you should wipe the front and rear panels  
and the cabinet with a soft cloth. For heavier dirt, dampen a  
soft cloth in a weak solution of mild detergent and water, wring  
it out dry, and wipe off the dirt. Following this, dry  
immediately with a clean cloth.  
Do not use rough material, thinners, alcohol or other chemical  
solvents or cloths since these could damage the finish or  
remove the panel lettering.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important Safeguards / Precautions / Table of Contents............................ 2 - 5  
Getting Started  
Notes on Discs .................................................................................................... 6  
Playable Discs / The Structure of the Disc Content / About Video CDs / MP3 compatibility  
information / Handling Discs / Cleaning Discs / Storing Discs / Notes on Copyright  
Features/Supplied Accessories......................................................................... 8  
Features / Supplied Accessories  
Preparing the Remote Controller....................................................................... 9  
Inserting the Batteries / Using the Remote Controller  
Facilities and Connections  
Control Position and Names ............................................................................ 10  
Front Panel / Rear Panel / Display / Remote Controller  
Making Connections ......................................................................................... 14  
Connections to a TV / Optional Video Connections / Optional Audio Connections  
Basic Operations  
Turning on.......................................................................................................... 17  
Connecting the POWER  
Basic Playback .................................................................................................. 18  
Starting Playback / Various Playback  
Advanced Operations  
Using Banner Display ....................................................................................... 20  
Using the on-screen Banner Display / Selecting a Title / Selecting a Chapter or Track /  
Selecting a Playback Audio Setting / Changing the Subtitle Language /  
Changing the Camera Angle / Using IntroScan function / Using a bookmark  
Other Operations .............................................................................................. 25  
Random Play / Repeat Play / A-B Repeat Play / CD Play function / Memory Play  
MP3 Function ................................................................................................................... 28  
Playing back MP3 / Selecting MP3 files / MP3 memory playback  
Function Setup  
Customizing the Settings ................................................................................. 30  
Making Adjustments to Setting / Language Setting / Operation Setting /  
Picture Setting / Audio Setting  
Table of Languages........................................................................................... 36  
Table of Language and Their Code No.  
Others  
Troubleshooting ................................................................................................ 37  
Specifications.................................................................................................... 38  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on Discs  
This section shows you how to handle, clean, and store discs.  
The Structure of the Disc Content  
Playable Discs  
This DVD Changer can playback the following discs.  
DVD-Video  
Normally, the contents of DVD-Video are divided into titles, and the  
titles are subdivided into chapters.  
Disc mark  
Contents  
Disc size  
Title 2  
Title 1  
Chapter 1  
12 cm  
Audio  
+
Chapter 1  
Chapter 2  
Chapter 2  
Chapter 3  
DVD-  
Video  
Video  
(moving  
pictures)  
8 cm  
Audio +  
Video  
(moving  
pictures)  
12 cm  
8 cm  
Video CD/CD  
Video CD and CD are divided into tracks.  
Video  
CD  
Track 1  
Track 2  
Track 4  
Track 5  
Track 3  
CD  
12 cm  
CD-R*  
CD-RW*  
Audio  
8 cm (CD single)  
* The DVD Changer can play CD-R/RW discs recorded in  
CD-DA format, or with MP3 audio files. Some CD-R/RW  
discs may not be able to be played back.  
About Video CDs  
This DVD Changer supports Video CDs equipped with the PBC  
(Version 2.0) function. (PBC is the abbreviation of Playback  
Control.) You can enjoy two playback variations depending on the  
type of disc.  
• Video CD not equipped with PBC function (Version 1.1)  
Sound and movies can be played on this DVD Changer in the  
same way as a CD.  
• Video CD equipped with PBC function (Version 2.0)  
In addition to operation of the Video CD not equipped with the  
PBC function, you can enjoy playback with interactive software  
and search function using the menu displayed on the TV screen  
(Menu Playback). Some of the functions described in this  
Instruction Manual may not work with some discs.  
• You cannot play discs such as DVD-Audio, DVD-RAM etc., even  
if the marks in the above table are labeled on those discs.  
• This DVD Changer uses the NTSC color system, and cannot  
playback video media recorded in any other color system  
(SECAM, etc.).  
• Avoid using heart-shaped or octagonal discs. Playing irregularly  
shaped discs may damage the internal mechanism of the DVD  
Changer.  
Discs with shapes such  
as these cannot be  
played.  
• Do not use discs that have residue from adhesive tape, rental discs  
that have peeling labels, or discs that have custom labels or  
stickers. Otherwise, you may not be able to eject the discs or the  
DVD Changer may become inoperative.  
MP3 compatibility information  
• The CD-R or CD-RW must be ISO 9660 level 1 compatible.  
• Files should be MPEG1 Audio Layer 3 format, 32 kHz, 44.1 kHz  
(recomended) or 48 kHz, 32 kbps - 320 kbps (128 kbps  
recomended). Incompatible files will not play.  
• This system only plays tracks that are named with the file  
extension “.mp3” or “.MP3”.  
• Use CD-R or CD-RW media for recording your MP3 files. The  
disc must be finalized in order to play.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling Discs  
Notes on Copyright  
• Do not touch the playback side of the disc.  
It is forbidden by law to copy, broadcast, show, broadcast on cable,  
play in public, and rent copyrighted material without permission.  
The video recorded on DVD-Video is copy protected, and any  
recordings made from these discs will be distorted.  
This product incorporates copyright protection technology that is  
protected by method claims of certain U.S. patents and other  
intellectual property rights owned by Macrovision Corporation and  
other rights owners. Use of this copyright protection technology  
must be authorized by Macrovision Corporation, and is intended for  
home and other limited viewing uses only unless otherwise  
authorized by Macrovision Corporation. Reverse engineering or  
disassembly is prohibited.  
Playback side  
• Do not attach paper or tape to discs.  
Cleaning Discs  
• Fingerprints and dust on the disc cause picture and sound  
deterioration. Wipe the disc from the center outwards with a soft  
cloth. Always keep the disc clean.  
• If you cannot wipe off the dust with a soft cloth, wipe the disc  
lightly with a slightly moistened soft cloth and finish with a dry  
cloth.  
• Do not use any type of solvent such as thinner, benzine,  
commercially available cleaners or antistatic spray for vinyl LPs.  
It may damage the disc.  
Storing Discs  
• Do not store discs in a place subject to direct sunlight or near heat  
sources.  
• Do not store discs in places subject to moisture and dust such as a  
bathroom or near a humidifier.  
• Store discs vertically in a case. Stacking or placing objects on  
discs outside of their case may cause warping.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features/Supplied Accessories  
Features  
1
*
*
“DTS” and “DTS Digital Out” are trademarks of Digital Theater  
Systems, Inc.  
Manufactured under license from Dolby Laboratories.  
“Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential Unpublished Works. ©1992-1997  
Dolby Laboratories, Inc. All rights reserved.  
G Plays DVD-Video Discs, Video CDs, CDs  
G 10-bit Video DAC  
G Parallel Video Output  
G Digital Outputs pass DTS®*1, Dolby®*2 Digital and PCM Signals  
G Built-In Dolby® Digital decoder  
G Full-function remote controller  
G Direct Digital path  
2
G Plays 5 Discs  
G CD-R and CD-RW playable  
G Plays MP3  
G CD Play function for audiophile  
G Pass 96 kHz PCM digital stream  
G Heavy-duty power cord  
G RS 232 interface for system control  
Supplied Accessories  
Make sure your box contains everything listed below.  
The number of accessories is indicated in brackets [ ].  
Remote controller (RC-472DV) [1]  
Batteries (size AAA/R3) [2]  
Audio/video cable [1]  
Power cord [1]  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing the Remote Controller  
Inserting the Batteries  
Using the Remote Controller  
Point the remote controller toward the remote control sensor.  
Remote control sensor  
1
Remove the battery compartment cover by  
pressing the tab and lifting up the cover.  
30˚  
30˚  
2
Insert the two batteries (size AAA/R3).  
Be sure to match the + and – ends of the batteries  
with the diagram inside the battery compartment.  
Notes  
• Place the unit away from strong light such as direct sunlight or inverted  
fluorescent light which can prevent proper operation of the remote  
controller.  
• Using another remote controller of the same type in the same room or using  
the unit near equipment which uses infrared rays may cause operational  
interference.  
• Do not put any object such as a book on the remote controller. The buttons  
of the remote controller may be pressed by mistake and drain the batteries.  
• Make sure the audio rack doors do not have colored glass. Placing the unit  
behind such doors may prevent proper remote controller operation.  
• If there is any obstacle between the remote controller and the remote  
control sensor, the remote controller will not operate.  
3
Replace the battery compartment cover.  
Notes  
• Do not mix new batteries with old batteries or different kinds of  
batteries.  
• To avoid corrosion, remove the batteries if the remote controller  
is not to be used for a long time.  
• Remove dead batteries immediately to avoid damage from  
corrosion. If the remote controller does not operate smoothly,  
replace both batteries at the same time.  
• The life of the batteries supplied is about six months but this  
will vary depending on usage.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Position and Names  
Front Panel  
For operational instructions, see the page indicated in brackets [ ].  
1
2
3
4
5
6
7
8
9
0
-
=
1 Power button [17]  
8 Stop 7button [18]  
Turns on the main power supply.  
Stops playing a disc. When disc is playing, if you press 7and  
£, the disc will start resume play. When 7is pressed again  
during stop mode, the resume function is canceled.  
2 Standby indicator [17]  
Lights in the standby mode.  
9 Play/Pause £/8button [18]  
3
Standby/On button [17]  
Toggle for standby on and off.  
Begins to play disc (close disc tray first if it is open.)  
Temporarily stops playback when a disc is playing. Press this  
button again for normal playback.  
4 CD Play button [26]  
0 Disc 1-5 buttons [18]  
Press to use the DVD Changer as CD player.  
5 Front panel display [12]  
6 Disc Skip button [18]  
Press to select a disc.  
- Disc tray [18]  
= Open/Close button [18]  
Press to select a disc. When the Disc Skip button is pressed  
while the disc tray open, the tray simply rotates.  
Press to open or close the disc tray.  
7 4/¢buttons [19]  
Allow you to move to the previous chapter or track / the next  
chapter or track on a disc.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Position and Names  
Rear Panel  
For operational instructions, see the page indicated in brackets [ ].  
AC INLET  
VIDEO OUTPUT  
COMPONENT  
AUDIO  
DIGITAL OUTPUT  
COAXIAL OPTICAL  
DVD  
MODEL NCOH.ADNGPECR-5.2  
OUTPUT  
P
P
R
VIDEO  
L
B
RS 232  
Y
R
S
VIDEO  
1
2 3 4 5 6 7  
8
1 RS 232 port  
5 AUDIO OUTPUT jacks [14-16]  
This port is to be used in conjunction with an external controller  
to control the operation of the DPC-5.2 using an external device.  
Insert audio cables (left and rights) to these jacks on your DVD  
Changer and to the corresponding Audio Input jacks (left and  
right) on your TV or receiver.  
2
VIDEO OUTPUT COMPONENT (PR/PB/Y) jacks [15]  
If your TV has component inputs, you can connect a component  
video cable to your TV and to your DVD Changer for ideal  
video quality. The component video cable only carries the video  
signal; remember to connect the left and right audio cables.  
6 DIGITAL OUTPUT COAXIAL jack [16]  
Use coaxial cable (not provided) to connect your DVD Changer  
to an AV component that features digital input capability. If the  
component has a Dobly Digital or DTS decoder, you can enjoy  
theater-quality multichannel sound.  
3 VIDEO OUTPUT S VIDEO jack [15]  
7 DIGITAL OUTPUT OPTICAL jack [16]  
Use optical cable (not provided) to connect your DVD Changer  
to an AV component that features digital input capability. If the  
component has a Dobly Digital or DTS decoder, you can enjoy  
theater-quality multichannel sound.  
If your TV has a S-Video jack, you can connect an S-Video  
cable to your TV and to your DVD Changer for improved video  
quality. The S-Video cable only carries the video signal;  
remember to connect the left and right audio cables.  
4 VIDEO OUTPUT VIDEO jack [14]  
Connect a video cable to this jack and to the Video Input jack on  
your TV.  
8 AC INLET [16]  
Use to connect the power cord to the wall outlet.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Position and Names  
Display  
1
2 3 4 5 6 7  
8
9 0 -  
=
~ !  
@
I Display Examples  
1 Inserted disc indicators  
Indicate the type of current disc that is loaded.  
During DVD-Video playback:  
2 Play/Pause indicators  
DVD  
TITLE  
CHAPTER  
MIN  
SEC  
Illuminate in play or pause mode.  
3 Parental Lock indicator  
Playing  
disc 1  
Playing chapter  
3 of title 2  
Elapsed time of  
the current title  
Illuminates in parental lock mode.  
Notes  
4 TITLE indicator  
• Some discs may not display chapter numbers.  
• A time indication not accompanied with a chapter number shows elapsed  
time of a segment within the current time.  
Illuminates to indicate the current title number.  
5 RESUME indicator  
Illuminates when the player is ready for resume playback.  
During Video CD playback:  
TRACK  
MIN  
SEC  
6 CHPTER/TRACK indicators  
VCD  
Indicate display mode of the current chapter of DVD disc or  
track number of Video CD or CD.  
Playing  
disc 1  
Playing Elapsed time of  
track 3 the current track  
7 RANDOM indicator  
Illuminates during random playback.  
Note  
8 REPEAT indicators  
Some discs may not display track numbers or elapsed time.  
Illuminate during repeat playback.  
During CD playback:  
9 MEM. indicator  
Illuminates during memory playback.  
TRACK  
MIN  
SEC  
CD  
0 PBC indicator  
Playing  
disc 1  
Elapsed time of  
the current track  
Playing  
track 3  
Illuminates when PBC is on for Video CD.  
- INTRO indicator  
Illuminates during intro-scan playback.  
= Elapsed time indicators  
Indicate playing time.  
~ Search indicators  
Illuminate during search and slow playback mode.  
! Disc number indicator/CD indicator  
Disc number indicators indicate the presence of a disc. CD  
indicator illuminates when the DVD Changer is in CD Play  
mode.  
@ Multifunction indicator  
Indicates operating status, messages, etc.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control Position and Names  
Remote Controller  
For operational instructions, see the page indicated in brackets [ ].  
7 ON SCREEN button [20-24]  
Press this button while you’re playing a disc to see Banner  
Display on the screen. The Banner Display contains various  
playback features and gives you the information about the disc  
you’re playing.  
1
@
8 MENU button [30]  
Displays the DVD Disc Menu on the TV screen in play mode and  
Setup Menu in stop mode.  
#
$
%
^
2
3
4
5
9 Cursor buttons (5/∞/2/3) [20-24, 27, 29, 30]  
Use the cursor buttons to select the items or settings.  
0 ENTER button [20-24, 27, 29, 30]  
Press this button to select and execute a highlighted menu item.  
- TOP MENU button [31]  
Press to call up the top menu programmed on the DVD. Depending  
on the DVD, the top menu may be identical to DVD menu or title  
menu. In case of Video CD, it will be used for PBC on/off.  
6
7
&
*
(
= AUDIO button [22]  
Press to select various audio languages on a DVD disc. In case of  
Video CD, it will be used to select the audio channel.  
8
)
~ Number buttons (0~9) [21]  
Allow to select numbers by pressing these buttons.  
9
! MEMORY button [27]  
Press to see Memory Edit Display on the screen in stop mode.  
0
-
@ OPEN/CLOSE 0 button [18]  
_
+
Press to open or close the disc tray.  
=
# SLOW  
/
buttons [19]  
Allow you to play movie in slow mode. Each time you press this  
button, slow speed will be changed.  
$ STEP e/Ebuttons [19]  
~
Freeze a picture when a disc is playing. Also the picture advances  
frame by frame each time to press this buttons. In case of VCD,  
reverse STEP can not be activated.  
% DOWN 4 / UP ¢buttons [19]  
Allow you to move to the previous chapter or track / the next  
chapter or track on a disc.  
!
¡
^ FR 1 / FF ¡buttons [19]  
Allow you to search in reverse or forward through a disc while it is  
in play mode. Each time you press this button, search speed changes.  
& PLAY £button [18]  
Begins to play disc (close disc tray first if it is open.)  
* PAUSE 8button [19]  
1 STANDBY ON button [17]  
Temporarily stops playback when a disc is playing. Press PLAY  
£button for normal playback.  
Toggle for standby on and off.  
2 SKIP button [18]  
( SUBTITLE ON/OFF button [22]  
Press to skip a disc.  
Turns the subtitles on and off when playing a DVD.  
3 RANDOM button [25]  
) SUBTITLE button [22]  
Press to do random playback.  
Press to select various subtitle language on a disc.  
4 REPEAT button [26]  
_ RETURN button [30]  
Press to go to the Repeat menu. You can repeat a title, chapter,  
track or one or entire discs.  
When you’re using the DVD Changer’s menu system, press this  
button to return to the preceding menu screen.  
5 A-B button [26]  
+ ANGLE button [23]  
Press to play section A-B repeatedly.  
Press to select various camera angles on a disc.  
6 STOP 7button [18]  
¡ CLEAR button [20, 22-24, 26, 29]  
Stops playing a disc. When disc is playing, if you press 7and £,  
the disc will start resume play. When 7is pressed again during  
stop mode, the resume function is canceled.  
Press to clear entered values and settings. Also Banner menu and  
OSD menu is removed from the screen when this button is pressed.13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Connections  
To accommodate a wide range of home entertainment systems, this player features numerous connection types for both audio and video. Please  
refer to the instructions on this and the following pages to determine the best possible type of connections for your system.  
Before Connecting  
• Refer to the instruction manuals supplied with any and all components that  
you plan to connect the DVD Changer to.  
• Connect the plugs securely.  
• Be sure to turn off the power of all components to be connected and unplug  
them from the wall outlet before making any connections.  
• Connect the DVD Changer to the TV or AV component directly. If you  
connect the DVD Changer to a VCR, TV/VCR combination, or video  
selector, the playback picture may be distorted as DVD Video images are  
copy protected.  
Incomplete  
• Please note that video connections to a TV or monitor are necessary because  
some discs require on-screen menu interaction before they can be played.  
Inserted completely  
Connections to a TV  
The diagram below shows how to make connections to a TV with built-in stereo speakers using the supplied audio/video cable. After making the  
connections on this page, you will be able to start using the DVD Changer.  
Be sure to set TV Aspect after connection using the setup menu explained in “Customizing the Settings” starting on  
page 30.  
AC INLET  
VIDEO OUTPUT  
COMPONENT  
AUDIO  
DIGITAL OUTPUT  
COAXIAL OPTICAL  
DVD  
Connect the power  
cord after all  
connections are  
complete.  
MODEL NCOH.ADNGPECR-5.2  
OUTPUT  
P
P
R
VIDEO  
L
B
RS 232  
Y
R
S
VIDEO  
To audio inputs  
Audio (R)  
Audio (L)  
To video input  
Audio/video cable (supplied)  
Using the supplied audio/video connection  
cable  
Using the supplied audio/video cable, make audio connections from  
the AUDIO OUTPUT L and R jacks to the corresponding audio  
input jacks on the TV.  
In the same manner, make video connection from the VIDEO  
OUTPUT VIDEO jack to the corresponding video input jack on the  
TV.  
Audio (R)  
Analog signal  
Audio (L)  
Video  
Note  
Signal flow  
Be sure to match the colors of the plugs on the cable with the corresponding  
jacks on the DVD Changer and the TV: yellow for video, red for R (right)  
audio and white for L (left) audio.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Connections  
Optional Video Connections  
Visible improvements in DVD-Video quality can be achieved by making either S-video or component video connections to a TV or monitor  
compatible with these types of connections.  
Note  
When either S-video or component video connection is made, it is not necessary to make composite video connections using the yellow cord of the audio-video  
cable.  
Be sure to set TV Aspect after connection using the setup menu explained in “Customizing the Settings” starting on  
page 30.  
Making S-video connections  
If the TV or monitor has an S-video input, making this type of video  
connection will produce improved picture quality. Using an S-video  
cable, connect the VIDEO OUTPUT S VIDEO jack to the  
corresponding S-video input jack on the TV.  
To S-video inputs  
S-video cable (not supplied)  
AC INLET  
VIDEO OUTPUT  
COMPONENT  
AUDIO  
DIGITAL OUTPUT  
COAXIAL OPTICAL  
DVD  
MODEL NCOH.ADNGPECR-5.2  
Connect the power  
cord after all  
connections are  
complete.  
OUTPUT  
P
P
R
VIDEO  
L
B
RS 232  
Y
R
S
VIDEO  
To component  
video inputs  
Component video cable (not supplied)  
Making component video connections  
If the TV or monitor has component video inputs, making this type  
of video connection will produce the ideal picture quality for the  
presentation of DVD-Video. Using a componect video cable (sold  
separately), connect the VIDEO OUTPUT COMPONENT jacks to  
the corresponding component video input jacks on the TV.  
Actual labels for component video inputs may vary depending on  
the TV manufacturer. (e.g., Y, R-Y, B-Y or Y, CB, CR)  
In some TVs or monitors, the color levels of the playback picture  
may be reduced slightly or the tint may change. In such a case,  
adjust the TV or monitor for optimum performance.  
PR  
Component  
signal  
PB  
Y
S-video signal  
Signal flow  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Making Connections  
Optional Audio Connections  
This DVD Changer provides numerous ways to take full advantage of the digital multi-channel sound recorded on DVD and some CD media.  
Be sure to set Digital Audio Out after connection using the setup menu explained in “Customizing the Settings” starting  
on page 30.  
Digital connections  
When you are making connections to an amplifier or receiver that  
has internal Dolby Digital or DTS decoding capabilities, set Digital  
Audio Out to “Dolby Digital” or “DTS” using the setup menu  
explained in “Customizing the Settings” starting on page 30. See  
page 35 for direct information.  
When you are making connections to an amprifer or receiver that  
has digital input capabilities, but no internal decoder, set Digital  
Audio Out to “PCM” using the on-screen menu explained in  
“Customizing the Settings” starting on page 30. See page 35 for  
direct information. Setting Digital Audio Out to any other setting  
could result in digital noise being output that could cause harm your  
hearing and may also damage your speakers.  
Make digital connections from the DVD Changer to an AV  
component that features digital input capability or one or more  
multi-channel audio decoders to realize the full cinematic  
experience made possible by the DVD format. This DVD Changer  
features optical and coaxial digital audio output jacks and can  
output Dolby Digital and DTS bitstreams as well as outputting  
standard PCM.  
Make connections from the DIGITAL OUTPUT OPTICAL jack to  
the digital optical input jack on the AV component using an optical  
fiber cable (sold separately). Make connections from the DIGITAL  
OUTPUT COAXIAL jack to the digital coaxial input jack on the  
AV component using a coaxial cable (sold separately). It is not  
necessary to make more than one type of digital connection to a  
single component.  
Notes  
• Refer to the instructions supplied with the AV component for details on  
what digital audio formats it is compatible with.  
• Even if digital audio connections are made, it is also recommended to  
make analog connections, because some conditions or media may prohibit  
digital audio output.  
To digital  
input (coaxial)  
Coaxial cable (not supplied)  
An amplifier or receiver with a  
Dolby Digital or DTS decorder or  
Optical cable (not supplied)  
digital inputs  
To digital  
input (optical)  
AC INLET  
VIDEO OUTPUT  
COMPONENT  
AUDIO  
DIGITAL OUTPUT  
COAXIAL OPTICAL  
DVD  
MODEL NCOH.ADNGPECR-5.2  
DO NOT connect the  
power cord until all  
connections are  
complete.  
OUTPUT  
P
P
R
VIDEO  
L
B
RS 232  
Y
R
S
VIDEO  
To audio input  
An amplifier or receiver  
with stereo inputs  
Audio cable (not supplied)  
Making stereo audio connections  
Using an audio cable (sold separately), make audio connections  
from the AUDIO OUTPUT L and R jacks to the corresponding  
jacks on the stereo component.  
Audio (R)  
Analog signal  
Be sure to set Digital Audio Out setting to “PCM” using the setup  
menu explained in “Customizing the Settings” starting on page 30.  
See page 35 for direct information.  
Audio (L)  
Digital signal  
Digital signal  
Coaxial plug  
Notes  
Optical plug  
• Be sure to match the colors of the plugs on the cable with the  
corresponding jacks on the DVD Changer and the stereo component: red  
for R (right) audio and white for L (left) audio.  
• Do not make connections to the PHONO or TUNER jacks on the stereo  
component.  
Signal flow  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning on  
Connecting the Power  
Notes  
The DPC-5.2 is shipped with the main power (Power) switch in the on  
position (_On). When the power cord is plugged in for the first time,  
the DPC-5.2 will automatically enter the standby mode and the Standby  
indicator will light (same condition after step 2 below).  
• Make sure that all appropriate connections have been completed  
as described on pages 14 to 16.  
• Turning on the DVD Changer may cause a momentary power  
surge, which might interfere with other electrical equipment such  
as computers. To prevent interference, use a wall outlet on a  
different circuit.  
Power  
Standby/On  
Standby indicator  
STANDBY/ON  
1
Plug the supplied power  
cord into the AC INLET  
and then into the power  
outlet on the wall.  
AC INLET  
To a wall outlet  
Power cord (supplied)  
Notes  
• Do not use a power cord other than the one supplied with  
the DPC-5.2. The power cord supplied is designed for use  
with the DPC-5.2 and should not be used with any other  
device.  
• Never have the power cord disconnected from the DPC-  
5.2 while the other end is plugged into the wall outlet.  
Doing so may cause an electric shock. Always connect by  
plugging into the wall outlet last and disconnect by  
unplugging from the wall outlet first.  
3
Press Standby/On on  
the DVD Changer or  
remote controller.  
The DVD Changer turns on and the Standby indicator turns  
off. It takes several seconds to read the disc in the disc tray.  
Notes  
• You can turn on the DVD Changer by pressing Open/  
Close or Play.  
2
Press Power to switch on  
the main power.  
•
•
To put the DVD Changer in the standby mode, press Standby/  
On on the DVD Changer or remote controller. Be sure to set the  
volume to minimum before putting the DVD Changer in the standby  
mode for the next use to avoid sudden loud sound reproduction.  
While the Standby indicator lights up, the DVD Changer can  
receive signals from the remote controller. However, if you press  
Power on the DVD Changer to switch off the main power, the  
remote controller cannot be used to turn on the DVD Changer.  
The DVD Changer enters standby mode.  
The Standby indicator lights up.  
Notes  
• The buttons on the remote controller do not operate if the  
• Setting the Standby button to standby does not shut off  
Power switch is set to Off.  
the power completely.  
• To switch off the main power, press Power again.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD  
CD  
Basic Playback  
Before playing  
Warning  
• DVD-Video, Video CD, CD can be played with the DVD Changer (see “Playable Discs” on page 6). Do  
not play anything else.  
If the DVD Changer is connected to the TV or  
amplifier through the analog audio jacks, do not  
play DTS-encoded discs. Excessive noise may  
be output from the analog stereo jacks, which  
may damage the connected equipment.  
• When playing DVD-Video or Video CD with video features, turn on the TV and set the TV to the DVD  
Changer’s input.  
• If an audio system is connected to the DVD Changer, turn on the audio system and set it to the DVD  
Changer’s input.  
VCD  
CD  
DVD  
To reproduce DTS surround sounds, digital  
connection to an amplifier with a DTS decoder  
is needed.  
About the  
,
and  
marks in the pages related to disc operation  
DVD  
VCD  
CD  
means the function or title is related to DVD-Video operation.  
means the function or title is related to Video CD operation.  
means the function or title is related to audio CD operation.  
Starting Playback  
Disc Skip 4/¢ Stop 7  
Play/Pause £/8  
Disc 1-Disc 5  
Disc tray  
Open/Close  
I To stop playback  
1
2
3
Press Open/Close.  
Press Stop 7.  
The disc tray opens.  
When you press Play/Pause £/8to restart playback,  
playback starts from the location where you stopped playback  
because the location index is stored in memory.  
If the DVD Changer is in standby mode when  
Open/Close button is pressed  
The DVD Changer turns on and the disc tray opens. In this  
Note  
case, it takes several seconds until the disc tray opens.  
The location where playback resumes may vary depending on the  
disc or the scene where you stopped.  
Resuming playback from the beginning  
Press Stop 7again after stopping playback to clear the location  
index memory, then press Play/Pause £/8to start playback.  
Place a disc on the disc tray.  
To insert or remove another disc by changing  
the tray position, press Disc Skip.  
Put the disc in the tray with the label side facing up.  
There are two different disc sizes.  
DVD  
VCD CD  
Playback starts from the beginning of the current title.  
Playback starts from the beginning of the disc.  
To start playback from the beginning of the DVD-Video, press  
Open/Close to open the disc tray then press Play/Pause £/8to  
close the disc tray and start playback.  
Place the disc in the correct guide on the disc tray.  
Press Play/Pause £/8.  
I To select a disc  
The disc tray closes and playback starts.  
If you press Open/Close to close the tray after step  
2, playback may automatically start.  
Press one of Disc 1 to Disc 5 buttons or press Disc  
Skip repeatedly.  
The appropriate disc indicator and the play  
indicator light.  
For the other information that appears in the  
display, see page 12.  
If the DVD Changer is in standby mode when  
Play/Pause £/8 button is pressed  
The DVD Changer turns on and playback starts. In this  
CAUTION  
Keep your fingers well clear of the disc tray as it is closing.  
case, it takes several seconds until playback starts.  
Neglecting to do so may cause serious personal injury.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Playback  
Various Playback  
DVD  
VCD  
CD  
I To remove the disc  
Press 0to open the disc tray.  
Remove the disc after the disc tray opens completely.  
After removing the disc, be sure to press the button again to  
close the tray.  
Press Disc Skip on the DVD Changer or SKIP on the remote  
controller to rotate the disc tray while the tray open.  
OPEN/CLOSE 0  
SLOW  
SKIP  
I To play in fast reverse or fast forward  
STEP e/E  
DOWN 4 / UP ¢  
FR 1 / FF ¡  
DVD  
VCD  
CD  
During normal playback, press 1/¡.  
Each press of the same button changes the playback speed.  
(At the time of DVD playback)  
PLAY £  
PAUSE 8  
F.SEARCH 1 (approx. x2) → F.SEARCH 2 (approx. x4) →  
F.SEARCH 3 (approx. x8) → F.SEARCH 4 (approx. x16) →  
F.SEARCH 1 (back to the beginning)  
(At the time of VCD/CD playback)  
F.SEARCH 1 (approx. x2) → F.SEARCH 2 (approx. x4) →  
F.SEARCH 3 (approx. x8) → F.SEARCH 1 (back to the beginning)  
The rate and direction of playback is indicated by search  
indicators (2or 3) in the display.  
To resume normal playback, press £.  
Notes  
• The DVD Changer mutes sounds and omits subtitles during reverse  
and forward scan of DVD-Video.  
• The playback speed may differ depending on the disc.  
DVD  
VCD  
CD  
I To skip chapters or tracks  
During playback, press 4/¢.  
The chapter (or track) in the direction of the button pressed is skipped,  
and the selected chapter (or track) will be played from the beginning.  
When 4is pressed once during playback, the chapter (or  
track) being played will be played from the beginning.  
DVD  
VCD  
I To pause playback (still mode)  
Press 8during playback.  
To start playback, press £.  
DVD  
VCD  
I Playing frame by frame  
Tip to obtain a higher quality picture  
Occasionally, some picture noise not usually visible during a normal  
broadcast may appear on the TV screen while playing a DVD-Video  
because the high resolution pictures on these discs include a lot of  
information. While the amount of noise depends on the TV you use, you  
should generally adjust the TV to reduce sharpness when viewing DVD-  
Videos.  
Press 28/83repeatedly.  
Each time you press the button the picture advances one frame.  
To resume normal playback, press £.  
Note  
The sound is muted during still mode and frame by frame playback.  
DVD  
VCD  
I To play in slow-motion  
Notes  
• Do not move the DVD Changer during playback. Doing so may damage  
the disc.  
Press  
/
during playback.  
Each press of the same button changes the playback speed.  
F.SLOW 1/16 → F.SLOW 1/8 → F.SLOW 1/4 → F.SLOW 1/2 →  
F.SLOW 1/16 (back to the beginning)  
• Use Open/Close 0on the remote controller or DVD Changer to open  
and close the disc tray. Do not touch the disc tray while it is moving.  
Doing so may cause the DVD Changer to malfunction.  
• Do not press down on the disc tray or put any objects other than playable  
discs on the disc tray. Doing so may cause the DVD Changer to  
malfunction.  
The rate and direction of playback is indicated by search  
indicators (2or 3) in the display.  
To resume normal playback, press £.  
• In many instances, a menu screen appears when playback of a DVD  
movie is complete. Prolonged display of an on-screen menu may damage  
your television set, permanently etching that image onto its screen. To  
avoid this, be sure to press 7once the movie is complete.  
Notes  
• The sound is muted during slow-motion playback.  
• The playback speed may differ depending on the disc.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD  
CD  
Using Banner Display  
DVD  
VCD  
CD  
Using the on-screen Banner Display  
The on-screen Banner Display contains many playback features.  
To see the Banner Display, press ON SCREEN on the remote  
controller while a disc is playing. Use 2/3to move through the  
different features in the Banner Display. Each feature is illustrated  
with an icon.  
During playback, press ON  
1
SCREEN.  
The Banner Display appears on the screen.  
When playing a DVD  
Chapter  
Title  
Subtitles  
Audio Angles  
Bookmarks Disc Number  
Disc Type  
ON SCREEN  
SUBTITLE ON/OFF  
SUBTITLE  
Time Indicator  
When playing a Video CD/CD  
Introscan Time Information Disc Number  
Track Bookmarks  
2/3/5/∞  
ENTER  
Disc Type  
AUDIO  
ANGLE  
CLEAR  
Time Indicator  
Press 2/3to select a desired item,  
and press ENTER.  
Corresponding menu appears on the screen.  
2
«
To turn off the Banner Display  
Press ON SCREEN or CLEAR.  
Notes  
• You can only access the banner display when you’re playing a disc.  
• The banner display features are only available if the disc was created  
with that particular feature (i.e., if you select the Subtitle icon, you won’t  
be able to change the subtitle language unless the author of the disc  
created the disc with subtitles).  
• The invalid symbol  
appears on the screen when you press a button  
that doesn’t have any function. If one of the icons is “glayed out,” the  
banner feature isn’t available for the disc you’re playing.  
• Depending on the disc, pressing AUDIO, ANGLE or SUBTITLE may  
display a disc menu. For more details, refer to the instruction notes on  
the disc.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Banner Display  
DVD  
VCD  
CD  
DVD  
Selecting a Title  
Selecting a Chapter orTrack  
DVD-Video  
DVD-Video  
Title 1  
Chapter 1 Chapter 2  
Title 2  
Chapter 2  
Title 1  
Title 2  
Chapter 3  
Chapter 1  
Some discs contain more than one title. For example, there might  
be four movies on one disc (each movie might be considered a  
title).  
Video CD/CD  
Track 1  
Track 2  
Track 4  
Track 5  
Track 3  
Press ON SCREEN.  
1
Because DVD discs use digital technology, a title can be divided  
into individual chapters (similar to tracks on a CD). You can skip a  
specific chapter by using the Chapter section in the Banner  
Display.  
Press 2/3until the TITLE icon is  
highlighted.  
2
Press ON SCREEN.  
1
«
Press 2/3until the CHAPTER or  
TRACK icon is highlighted.  
2
Press ENTER.  
3
– –  
“T  
” appears.  
«
Press the numeric buttons to enter  
the title number.  
4
When you enter a one-digit title number, you  
may have to press ENTER on the remote  
controller after pressing the number (1~9) on  
the remote controller. Otherwise press 0 first  
and the other value. Then play starts. This  
varies depending on number of title within the  
disc you’re playing.  
Press ENTER.  
3
– –  
– –  
” appears.  
“C  
” or “Tr.  
Press the numeric buttons to enter  
the chapter or track number.  
When you enter a one-digit chapter or track  
number, you may have to press ENTER on  
the remote controller after pressing the  
number (1~9) on the remote controller.  
Otherwise press 0 first and the other value.  
Then play starts. This varies depending on  
number of chapter or track within the disc  
you’re playing.  
4
Note  
Some discs only have one title.  
Note  
The chapter feature won’t work if the disc isn’t formatted with separate  
chapters.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Banner Display  
DVD  
DVD  
Selecting a Playback Audio Setting  
Changing the Subtitle Language  
Good morning!  
Bon jour!  
¡Buenos días!  
Good evening!  
Bon soir!  
¡Buenas tardes!  
You can select the preferred audio language and sound system as a set  
from those included on the disc. This function lets you temporarily  
change the audio language which you selected as the automatic  
setting in the setting menu (see pages 30 and 31), and choose the  
sound system if the disc is recorded in more than one sound format.  
You can display subtitles on the TV screen and select a subtitle  
language from those included on the DVD-Video.  
Press ON SCREEN during playback.  
1
Press ON SCREEN during playback.  
1
Press 2/3until the SUBTITLE icon  
is highlighted.  
2
Press 2/3until the AUDIO icon is  
highlighted.  
2
Press ENTER.  
3
The subtitle menu appears.  
Displayed when  
SUBTITLE is on  
Press ENTER.  
The audio menu appears.  
3
Press ENTER to select the subtitle  
4
language.  
Press ENTER to select the audio.  
Each time you press ENTER, the subtitle  
4
Each time you press ENTER, the audio  
language changes.  
recording system set changes.  
Press SUBTITLE ON/OFF to select  
5
subtitle on or off.  
Switching between display of subtitles and no  
display of subtitle is done each time the key is  
pressed.  
To turn off the audio menu  
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for  
about 5 seconds.  
To turn off the subtitle menu  
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for  
Using AUDIO on the remote controller  
about 5 seconds.  
1 Press AUDIO on the remote controller during playback.  
2 Press AUDIO or ENTER to select the audio language.  
Using SUBTITLE on the remote controller  
Notes  
1 Press SUBTITLE on the remote controller during playback.  
2 Press SUBTITLE or ENTER to select the subtitle language.  
3 Press SUBTITLE ON/OFF to select sub title on or off.  
• Dolby Digital 5.1 Channel sound may be displayed as “6ch. Dolby  
Digital”.  
• Before changing the setting, read through the explanation on “Digital  
Audio Out” on page 35 and carefully select the setting.  
• Depending on the disc, it may be necessary to select the audio sound  
track using the DVD menu. When this is the case, press MENU to open  
the DVD menu and select the appropriate sound track as indicated on the  
DVD menu screen.  
• When the DVD Changer is turned on or when the disc is changed, the  
audio settings are restored to the presets. In some cases, a language  
recorded on the disc may be given priority and selected automatically  
when the disc is loaded regardless of the setting.  
Notes  
•
When you turn on the DVD Changer or replace a disc, the DVD Changer  
returns to the automatic setting in the setting menu (see pages 30 and 31).  
When you select a subtitle language which is not included on the disc,  
the DVD Changer plays the prior language programmed on the disc.  
• During some scenes, the subtitles may not appear immediately after you  
change the subtitle setting.  
• Some DVD-Video are set to display subtitles automatically, and you  
cannot turn them off even if you set the subtitle function to off.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Banner Display  
VCD  
CD  
DVD  
Changing the Camera Angle  
Using IntroScan function  
Track : 1  
Track : 2  
Track : 3  
Angle : 1  
Angle : 2  
Angle : 3  
If the scene was recorded from multiple angles, you can easily  
change the camera angle of the scene you are watching.  
IntroScan plays the first few seconds of each track on the Video CD  
or CD similar to the scan feature that's on many car radios.  
Press ON SCREEN during playback.  
When playing a Video CD, press ON  
1
1
SCREEN to display the Banner  
Display.  
When playing a CD, the Banner Display  
appears on the screen automatically.  
Press 2/3until the Angle icon is  
highlighted.  
2
Press 2/3until the IntroScan icon  
is highlighted.  
2
Press ENTER.  
The angle menu appears.  
3
Press ENTER.  
3
The INTRO indicator lights.  
The first 10 seconds of each track will be  
played.  
Press £to stop IntroScan playback and start  
playing the current track entirely.  
Press ENTER to select the angle.  
4
Each time you press ENTER, the angle  
changes.  
Note  
After IntroScan goes through all of the tracks, it stops.  
To turn off the angle menu  
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for  
about 5 seconds.  
Using ANGLE on the remote controller  
1 Press ANGLE on the remote controller during playback.  
2 Press ANGLE or ENTER to select the camera angle.  
Notes  
• You can change the camera angle during still playback. The camera  
angle changes to the new setting when you resume normal playback.  
• If you pause a picture immediately after changing the camera angle, the  
resumed playback picture may not use the new camera angle.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Banner Display  
DVD  
VCD  
CD  
Using a bookmark  
The bookmark feature lets you mark a point on the disc that you can  
go to quickly. You can store up to 9 bookmarks.  
Recalling a bookmarked scene  
Marking a scene  
Press ON SCREEN during  
playback.  
Press ON SCREEN during  
1
1
2
playback.  
Press 2/3until the bookmark icon  
Press 2/3until the bookmark icon  
2
is highlighted and press ENTER  
is highlighted and press ENTER  
The bookmark menu appears.  
The bookmark menu appears.  
Exit icon  
«
«
When you reach the scene you  
3
want to mark, press ENTER.  
Press 5to move the cursor to the  
“GO TO” parts of the bookmark  
menu.  
3
4
The bookmark appears on under square.  
You can store up to 9 bookmarks by repeating  
this step.  
Press 2/3to select the  
bookmarked scene you want to  
activate.  
To return to the Banner Display  
Press 2/3to select the exit icon and press ENTER.  
To clear the bookmark  
The bookmark is cleared when a disc is removed from the DVD  
Changer, when the power is turned off, or when the DVD Changer  
enters the standby mode.  
Press ENTER to activate the  
bookmark.  
5
Notes  
• If all 9 bookmarks are in use, you can still mark new scenes, but the  
previous bookmarks will be erased.  
• Depending on the disc, the bookmark function may not work.  
To turn off the bookmark menu  
Press ON SCREEN or CLEAR.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD  
CD  
Other Operations  
DVD  
VCD  
CD  
The following operations can be performed directly from the  
remote controller.  
• Random Play  
• Repeat Play  
Random play  
TiItTleLE: 1: 1  
• A-B Repeat Play  
• Memory Play  
CHhaApPteTrE:R3: 3  
Title : 2  
Title : 3  
Chapter : 2  
Chapter : 1  
The chapters or tracks of the disc are played in random order.  
Press RANDOM.  
The random playback starts.  
RANDOM  
REPEAT  
A-B  
Lights  
Display  
RANDOM  
The Random Play display appears on the  
screen.  
ON SCREEN  
2/3/5/∞  
ENTER  
To turn off the Random Play display  
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for  
about 5 seconds.  
Numeric  
buttons  
Note  
When playing a DVD, the Random function may not work.  
CLEAR  
MEMORY  
To cancel random play  
Press RANDOM so that RANDOM goes off or to select “Standard  
Play”.  
Each time you press RANDOM, random play will be on and off.  
Random Play ↔ Standard Play  
The Standard Play display appears when random is off.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other operations  
DVD  
DVD  
VCD  
CD  
VCD  
CD  
Repeat play  
A-B Repeat play  
A
B
The A-B repeat function lets you mark a segment to repeat between  
the beginning “A” and the end “B” of the segment you want to  
replay.  
Desired disc or title can be played back repeatedly.  
There are five repeat options:  
• All Discs Repeat all discs.  
• 1 Disc  
• Title  
Repeat the disc that is playing.  
Repeat the title that is playing.  
Press A-B when you want to  
1
choose a scene (sound) as the  
• Chapter Repeat the chapter that is playing.  
• Track  
beginning point.  
Repeat the track that is playing.  
Lights  
Display  
REPEAT  
A-  
Press REPEAT repeatedly during  
playback.  
The Repeat display appears on the screen.  
The Repeat A- display appears on the screen.  
Each time you press REPEAT, the repeat  
option changes.  
At the time of DVD playback  
→ Repeat All Discs Repeats all discs.  
Press A-B again to choose a scene  
(sound) as the end point.  
2
↓
The Repeat A-B display appears.  
Repeat 1 Disc  
Repeats the entire disc.  
Repeats the current title.  
↓
Lights  
Repeat Title  
Display  
↓
REPEAT  
A-B  
Repeat Chapter Repeats the current chapter.  
↓
Repeat Off  
Resumes normal playback.  
The DVD Changer automatically returns to  
point A and starts repeat playback of the  
selected segment (A-B).  
At the time of Video CD/CD playback  
→
Repeat All Discs Repeats all discs.  
↓
Repeat 1 Disc  
Repeats the entire disc.  
↓
To turn off the Repeat A-B display  
Repeat Track  
Repeats the current track.  
Resumes normal playback.  
↓
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for  
Repeat Off  
about 5 seconds.  
To cancel A-B Repeat playback  
To turn off the Repeat display  
Press A-B so that REPEAT A-B goes off or to select “Repeat off”.  
Press ON SCREEN or CLEAR.  
The menu is switched off when no operation is performed for about  
5 seconds.  
CD  
To cancel repeat playback  
CD Play function  
Press REPEAT so that REPEAT goes off or to select “Repeat Off”.  
Since the DVD Changer allows you to insert up to five discs in any  
combination, there may be times when you only want to listen to  
music. In that case, proceed as follows:  
Press CD Play on the DVD Changer.  
Playback of DVD and Video CD discs is  
skipped in order not to interrupt sequential  
playback.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other operations  
DVD  
VCD  
CD  
Memory Play  
Title : 2  
Title : 2  
Chapter : 12  
Title : 1  
Chapter : 25  
Chapter : 1  
The DVD Changer automatically plays discs, titles, chapters, or  
tracks in the order you program.  
To delete memory  
Press MEMORY during stop mode.  
1
1 Press MEMORY during stop mode.  
The MEMORY EDIT display appears and the  
2 Move the cursor with 3to the “Playlist” and press 5/∞to  
select the column to be deleted from the “Playlist”. (The color of  
the column where the cursor is located will change.)  
3 Press 2and press 5/∞to move the cursor to the Delete button  
on the screen, and press ENTER.  
MEM. indicator lights.  
MEMORY EDIT  
Playlist  
Disc  
Title  
Chapter  
Add  
Delete  
Play  
D
2
T
2
C
All  
2
2
All  
(12)  
(2)  
Done  
Insert chapter or track  
1 Press MEMORY during stop mode.  
The MEMORY EDIT display appears.  
Press 5/∞or numeric buttons to  
select specific disc/title/chapter or  
track.  
2
MEMORY EDIT  
Playlist  
Disc  
Title  
Chapter  
Add  
Delete  
Play  
D
1
T
2
C
All  
1
2
All  
(2)  
4
2
1
5
3
1
1
3
12  
6
(12)  
Done  
All  
5
Press ENTER.  
2 Press 5/∞or numeric buttons to select specific disc/title/chapter  
or track.  
3 Move the cursor with 3to the “Playlist” and press 5/∞to  
select the column to be added.  
The cursor of the column where the cursor is located will  
change.  
4 Press 2to move the cursor to the Insert button on the screen and  
press ENTER.  
3
4
Select Add button on the screen to  
register selected value onto  
Playlist, then press ENTER.  
The new chapter or track will be insert before (above) the  
selected column.  
You can select maximam 32 values  
by repeating steps 2-4.  
5
6
To cancel memory playback  
In following cases, Memory play would be released.  
1 When you open and close tray.  
2 When you press 7twice.  
Press £or select Play button on  
the screen and press ENTER to  
start playback.  
3 When you turn power off.  
Notes  
• When you don’t add values onto Playlist and return to play mode, select  
Done button and press ENTER on the remote controller.  
• While a disc is playing, press MEMORY on the remote controller to start  
memory play.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Function  
MP3 On-screen display  
Playing back MP3  
The DVD Changer can play back MP3 files recorded on CD-R or  
When you insert MP3 media, the MP3 On-screen display appears.  
CD-RW.  
Root icon  
Playing file name  
Time elapsed  
Press £.  
When you insert MP3 media, playback will  
start automatically.  
MP3 On-screen display appears.  
Folder icon  
ALL CLEAR button  
Return folder icon  
To stop playback  
Press 7.  
To skip files  
Press 4/¢.  
Notes  
• It is not possible to play back folders and files (up to 223) that exceed  
the maximum limitations of the media.  
• A certain amount of time is required for the player to confirm the  
media on which MP3 files have been recorded before playback will  
commence.  
• The files will be played back in the sequence in which they were  
recorded (written).  
Files  
Memory window  
Note  
Single-byte characters between A and Z, single-byte numerais between 0  
and 9, and the single-byte underscore (_) can be displayed.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Function  
Selecting MP3 files  
You can select the files to be played back directly.  
MP3 memory playback  
You can listen to the desired files in any desired order.  
Press 5/∞to select the folder, then  
press ENTER  
During stop mode, press MEMORY.  
1
2
1
Press 5/∞to select the file, then  
press ENTER.  
«
«
Press 5/∞to select the file, then  
press ENTER.  
2
The selected file goes to memory window.  
You can select maximum 1025.  
Press £.  
3
«
Playback will start from selected file.  
Files in the next folder will be played back  
when no files exsit in the selected folder.  
To delete memory  
During stop mode, press 2/3to select the ALL CLEAR button,  
then press ENTER.  
You can delete file one by one by selecting and pressing CLEAR.  
To move to the upper layer  
Press ENTER on return folder icon.  
To select the folders to be played directly  
1 During stop mode, press 5/∞to select the folder, then press  
ENTER.  
2 Press 5/∞to select the upper folder icon, then press £.  
Playback will start from selected folder.  
Files in the next folder will be played back when no file exist in  
the selected folder.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
VCD  
CD  
Customizing the Settings  
When you insert a DVD-Video, Video CD, or CD, the  
various functions of the DVD Changer will be set (reset)  
according to the setting menu.  
You can customize this setting menu according to your  
preferences.  
DVD  
VCD  
CD  
Making Adjustments to Setting  
Press MENU during stop mode.  
Current setup menu display appears.  
1
MENU  
2/3/5/∞  
Press 5/∞to select the item you  
want to change, then press ENTER.  
2
ENTER  
Numeric  
buttons  
«
Press 5/∞to change the setting,  
3
then press ENTER.  
Further steps may be needed depending on the  
item or setting. Follow the steps described in  
the explanation of each item starting from page  
31.  
«
Repeat steps 2 to 3 to change the  
setting of other items.  
4
Press MENU to turn off the setup  
menu display.  
5
How to use RETURN  
When RETURN is presseed, the display returns to the previous  
screen (stop mode).  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Settings  
Language-related settings  
Language Setting  
English: To display subtitles in English.  
Spanish: To display subtitles in Spanish.  
DVD  
Audio Language  
French: To display subtitles in French.  
Others: To make a further choice. Follow steps 1 - 3 below.  
This sets the language to be used when playing a disc. If a disc  
does not contain the selected language, it is played in the priority  
language set for each disc.  
1
2
3
Select “Other” and press ENTER.  
Press the numeric buttons to enter the 4-digit code.  
Select OK button and press ENTER.  
Notes  
• Some DVD-Video may be set to display subtitles in a different language  
than you selected. A prior subtitle language may be programmed on the  
disc.  
• Some DVD-Video allow you to change audio and subtitle selections only  
via the disc menu. If this is the case, Press TOP MENU or MENU and  
choose the appropriate audio and subtitle language from the selection on  
the disc menu.  
• Instruction notes of discs may refer to the button that displays the top menu  
as title button.  
English: To play sound tracks in English.  
DVD  
Spanish To play sound tracks in Spanish.  
French: To play sound tracks in French.  
Menu Language  
Others: To make a further choice. Follow steps 1 - 3 below.  
This sets the initial setup of language as well as the language used  
in on-screen messages such as “PLAY”.  
1
2
3
Select “Other” and press ENTER.  
Press the numeric buttons to enter the 4-digit code.  
Select OK button and press ENTER.  
Note  
Depending on the disc, a language recorded on the disc may be given priority  
and selected automatically when the disc is loaded regardless of the setting.  
DVD  
Subtitle Language  
This sets the language to be used when playing a disc. If a disc  
does not contain the selected language, it is played in the priority  
language set for each disc.  
English: To display disc menus in English.  
Spanish: To display disc menus in Spanish.  
French: To display disc menus in French.  
Note  
Some DVD-Video may not include your pre-selected language. In this case,  
the DVD Changer automatically displays disc menus consistent with the  
disc’s initial language setting.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Settings  
General utility settings  
Operation Setting  
To input password  
DVD  
Rating/Parental lock  
1
2
Select “Set Password”.  
This can restrict playback of adult-oriented DVD discs that you do  
not want to be seen by children.  
Press the numeric buttons to enter password.  
However, even when a DVD disc is marked “Adult-oriented” or so  
on the label, its viewing cannot be restricted unless the restriction  
level is recorded in the disc itself.  
3
Select OK button and press ENTER.  
Confirm Password display appears below Enter Password  
display.  
You cannot play DVD Video rated higher than the level you selected unless  
you cancel the parental lock function.  
For example, when you select level 7, discs rated higher than level 7 are  
locked out and cannot be played.  
The Rating level is equivalent to the following U.S. movie ratings.  
Level 7: NC-17  
Level 6: R  
Level 4: PG 13  
Level 3: PG  
Level 1: G  
Notes  
•
DVD-Video may or may not respond to the parental lock setting. This is not a  
defect in the DVD Changer. Make sure this function works with your DVD-Video.  
4
Press the numeric buttons to enter password.  
• When the password already has been set, the screen for change of the  
entered password will be displayed. In that case, enter the password (See  
“Password” below).  
DVD  
Password  
The password for rating setting, change, cancellation, etc. is set.  
5
Select OK button and press ENTER.  
Note  
Be sure not to forget your password. If you should forget it, press CD Play  
button while holding down the Disc 4 button to clear the password. If the  
display on the DVD Changer disappears with this operation, press the Power  
switch on the DVD Changer and then press it again to recover the display.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Settings  
Operation Setting (continued)  
To change password  
6
Press the numeric buttons to enter new password.  
1
2
Press the numeric buttons to enter password.  
7
Select OK button and press ENTER.  
Select OK button and press ENTER.  
Password setup menu appears.  
To clear password  
3
Select “Change Password”.  
Enter Password menu appears.  
1
2
Press the numeric buttons to enter password.  
Select OK button and press ENTER.  
4
5
Press the numeric buttons to enter new password.  
Password setup menu appears.  
Select OK button and press ENTER.  
Confirm Password display appears below Enter Password  
display.  
3
Select “Clear Password” and press ENTER.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Settings  
Audio output setting  
Picture-related setting  
Picture Setting  
Audio Setting  
Dynamic Range  
DVD  
DVD  
TV Aspect  
Dynamic Range setting allows you to “compress” the dynamic  
range of a DVD’s sound track, so that you can lower the volume  
without losing extremely soft signals. This is especially useful  
when you are watching a movie late at night.  
This sets the screen size (4:3 or 16:9 aspect ratio) according to the  
connected TV.  
4 x 3 Letterbox:  
Choose this setting if you would  
prefer to see movies in their  
original aspect ratio. You will see  
the entire frame of the movie,  
but it will occupy a smaller  
portion of the screen. This  
Off:  
On:  
Full dynamic range is maintained.  
Dynamic range is reduced.  
Notes  
• This function works only during playback of Dolby Digital recorded discs.  
• The level of Dynamic Range Reduction may differ depending on the DVD.  
setting may result in the movie  
appearing with black bars at the  
top and bottom of the screen.  
4 x 3 Pan Scan:  
Choose this setting if you want  
the movie to fill the entire screen  
of your TV. You won’t see part  
of the picture (particularly the  
right and left edge).  
Some disc produced in a wide  
screen format can’t be cropped in  
this fashion, which means the  
black bars would appear at the  
top and bottom of the screen.  
16 x 9 Widescreen:  
Choose this setting if your DVD  
Changer is connected to a  
widescreen TV.  
Notes  
• The displayable picture size is preset on each DVD-Video. Therefore, the  
playback picture of some DVD-Video may not conform to the picture size  
you select.  
• When you play a DVD-Video recorded in the 4:3 picture size only, the  
playback picture always appears in the 4:3 picture size regardless of the TV  
shape setting.  
• If you select “16:9 Widescreen” and you own a 4:3 TV set, the DVD  
playback picture will be horizontally distorted during playback. Images  
will appear to be horizontally compressed. Make sure the TV Shape  
conforms to the actual TV in use.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Customizing the Settings  
Audio Setting (continued)  
DOLBY DIGITAL Surround  
DVD  
VCD  
CD  
Digital Audio Out  
DVD Video that have the  
mark are recorded using this system.  
mark are recorded using this system.  
D
I
G
I
T
A
L
This sets the type of audio output from the digital audio output jack.  
DTS Surround  
DVD Video and CD that have the  
Important: DTS information  
If you set the Digital Audio Out setting to DTS, you must have your DVD  
Changer connected to a receiver or decoder with the DTS feature and the  
disc you play must support the DTS audio format. If you choose DTS and  
your receiver, decoder or disc doesn’t support DTS, you won’t hear any  
audio when you play the disc.  
DVD  
VCD  
CD  
Linear PCM  
PCM:  
Select when connected to a 2 channel digital stereo  
amplifier (see page 16).  
The DVD Changer outputs sounds in the PCM  
format when you play a DVD-Video disc recorded  
on the Dolby Digital.  
The DVD Changer does not output sounds in the  
PCM format when you play a DVD-Video disc  
recorded on the DTS recording system.  
Dolby Digital: Select when you connected to an amplifier  
equipped with a Dolby Digital decorder (see page  
16).  
The DVD Changer outputs digital audio  
information in the Dolby Digital format when you  
play a DVD-Video recorded in the Dolby Digital  
recording system.  
The DVD Changer does not output sounds in the  
PCM format when you play a DVD-Video disc  
recorded on the DTS recording system.  
96KHz ⇒ 48KHz: Even in case of 96 kHz digital signal, the  
DVD Changer will deliver 48 kHz signal out.  
96KHz ⇒ 96KHz: In case of 96 kHz digital signal, the DVD  
Changer will deliver 96 kHz signal out. In this case,  
your receiver should control 96 kHz signal.  
DTS:  
Select when you connected to an amplifier  
equipped with a DTS decorder (see page 16).  
The DVD Changer outputs digital audio  
information in the DTS format when you play a  
DVD-Video recorded in the DTS recording system.  
The DVD Changer outputs sounds in the Dolby  
Digital format when you play a DVD-Video disc  
recorded on the Dolby Digital recording system.  
Dolby Digital and DTS  
The 5.1-channel digital surround format of DOLBY DIGITAL/DTS enables  
you to individually play five full-range (20 Hz-20 kHz) channels (left and  
right front, center, two surround channels) plus an LFE (Low Frequency  
Effect) channel for the low-range effect sound. It will create a realistic sound  
as heard in theaters and concert halls.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Languages  
Table of Languages and Their Code No.  
Code No.  
Language  
Code No.  
Language  
Code No.  
Language  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Ameharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali; Bangla  
Bhutani  
Bihari  
Russian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Servo-Groatian  
Sesotho  
Setswana  
Shona  
6566  
6565  
6570  
8381  
6577  
6582  
7289  
6583  
6588  
6590  
6665  
6985  
6678  
6890  
6672  
6673  
6682  
6671  
7789  
6669  
7577  
6765  
9072  
6779  
7282  
6783  
6865  
7876  
6978  
6979  
6984  
7079  
7074  
7073  
7082  
7089  
7176  
7565  
6869  
6976  
7576  
7178  
7185  
7265  
7387  
7273  
7285  
7383  
7378  
7365  
7369  
7375  
7165  
7384  
7465  
7487  
7578  
7583  
7575  
8287  
7589  
8278  
7579  
7585  
7679  
7665  
7686  
7678  
7684  
7775  
7771  
7783  
7776  
7784  
7773  
7782  
7779  
7778  
7865  
7869  
7879  
7967  
7982  
7977  
8065  
8083  
7065  
8076  
8084  
8185  
8277  
8279  
Hungarian  
Icelandic  
Indonesian  
Interlingua  
Interlingue  
Iunpiak  
8285  
8377  
8371  
8365  
7168  
8382  
8372  
8384  
8478  
8378  
8368  
8373  
8383  
8375  
8376  
8379  
6983  
8385  
8387  
8386  
8476  
8471  
8465  
8484  
8469  
8472  
6679  
8473  
8479  
8483  
8482  
8475  
8487  
8575  
8582  
8590  
8673  
8679  
6789  
8779  
8872  
7473  
8979  
9085  
Irish  
Italian  
Japanese  
Javanese  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean  
Kurdish  
Laothian  
Latin  
Latvian, Lettish  
Lingala  
Lithuanian  
Macedonian  
Malagsy  
Malay  
Malayalam  
Maltese  
Maori  
Marathi  
Moldavian  
Mongolian  
Naru  
Nepali  
Norwegian  
Occitan  
Oriya  
Oromo (Afan)  
Panjabi  
Pashto, Pushto  
Persian  
Polish  
Portuguese  
Quechua  
Rhaero-Romance  
Romanian  
Sindhi  
Singhalese  
Siswati  
Slovak  
Slovenian  
Somali  
Spanish  
Sundanese  
Swahili  
Swedish  
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish  
Turkmen  
Twi  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
Bislama  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
Fiji  
Finnish  
French  
Frisian  
Galician  
Georgian  
German  
Greek  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Yiddish  
Yoruba  
Zulu  
Hebrew  
Hindi  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Check the following guide for the possible cause of a problem before contacting service. Refer also to the respective instruction manuals of the  
connected components and TV.  
Symptoms  
Causes  
Remedies  
Pages  
The DVD Changer doesn’t  
switch on.  
• The power cord is disconnected.  
• The main power is set to OFF.  
• There is external noise in the computer  
circuits of the DVD Changer.  
• Check the connection of the power cord.  
• Turn on the main power.  
• Switch off the main power, then switch it on  
again. If not recovered, disconnect the power  
cord, then connect it again.  
17  
17  
17  
• The AC fuse is blown.  
• No disc is inserted.  
• Contact your Integra/Onkyo authorized  
service station.  
–
The DVD Changer doesn’t  
start playback.  
• Insert a disc. (Check that “DVD,” “VCD,” or  
“CD” is lit in the DVD Changer’s display).  
18  
4
• The region number of the disc does not match • See “1. Regional Restriction Codes (Region  
that of the DVD Changer.  
• An unplayable disc is inserted.  
• The disc is placed upside down.  
• The disc is not placed within the disc tray  
guide.  
Number)” on page 4.  
• Check the playable discs.  
• Place the disc with the playback side down.  
• Place the disc within the proper guide on the  
disc tray.  
6
18  
18  
• The disc is dirty.  
• The parental lock function is activated.  
• Eject the disc and clean it.  
• Deactivate the parental lock function or  
change the parental lock level.  
7
32  
Brightness is unstable or noise • Copy protection is activated.  
is visible on the playback  
picture.  
• Connect the DVD Changer directly to the TV. 14  
Avoid connecting the DVD Changer to the TV  
through a VCR.  
The playback picture is  
occasionally distorted.  
• The disc is dirty.  
• It is in fast forward or fast reverse playback.  
• Eject the disc and clean it.  
• Sometimes a small amount of picture  
distortion may appear. This is not a  
malfunction.  
7
–
Playback doesn’t follow the  
course of the disc’s programs.  
• The DVD Changer is in repeat playback  
mode, memory playback mode, or random  
playback mode, etc.  
• Resume normal playback.  
18  
The picture from the DVD  
Changer doesn’t appear on the  
TV screen.  
• The TV is not set to receive the output signals • Set the TV to the DVD Changer’s input.  
from the DVD Changer.  
• The DVD Changer is not properly connected. • Check the connections to the DVD Changer.  
–
14, 15  
No sound or inaccurate sound • A wrong sound signal conversion method  
• Check the current sound signal conversion  
method, and select the right setting for  
“Digital Audio Out”.  
35  
is reproduced.  
(Digital Audio Out) is selected.  
• The TV is not set to receive the output signals • Set the TV to the DVD Changer’s input.  
from the DVD Changer.  
• The DVD Changer is not properly connected. • Check the connections to the DVD Changer.  
–
14-16  
26  
DVD disc cannot be played.  
• DVD disc cannot be played when the DVD  
• Press CD Play .  
Changer is set to CD Play mode.  
The buttons on the remote  
controller and DVD Changer  
do not operate.  
• Power supply fluctuations or other  
abnormalities such as static electricity may  
interrupt correct operation.  
• Switch off the main power, then switch it on  
again. If not recovered, disconnect the power  
cord, then connect it again.  
17  
The buttons on the DVD  
Changer operate but the  
buttons on the remote  
• No batteries are inserted in the remote  
controller.  
• The batteries are worn out.  
• Insert new batteries.  
9
• Replace with new batteries.  
• Point the remote controller at the remote  
9
9
controller do not operate.  
• The remote controller is not pointed at the  
remote sensor of the DVD Changer.  
• The remote controller is too far from the DVD • Operate the remote controller within 5 m  
Changer. (16 feet).  
sensor of the DVD Changer.  
9
Because the unit contains a microcomputer to provide advanced functions, it may malfunction due to external noise or static electricity. If  
this happens, press the Power switch on the DVD Changer and then press it again after about five seconds.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
DVD Changer  
Power supply  
AC 120 V, 60 Hz  
Power consumption  
Weight  
20 W  
15.0 lbs  
External dimensions  
Signal system  
17 1/8" x 5 1/16" x 16 15/16" (W/H/D)  
NTSC  
Frequency range (digital audio)  
48 kHz sampling 4 Hz to 22 kHz  
96 kHz sampling 4 Hz to 42 kHz  
Signal-to-noise ratio (digital audio)  
Audio dynamic range (digital audio)  
Harmonic distortion (digital audio)  
Wow and flutter  
More than 98 dB  
More than 95 dB  
Less than 0.005 %  
Below measurable level  
Temperature: 41°F to 95°F, Operation status: Horizontal  
Operating conditions  
Outputs  
Video output  
1.0 V (p-p), 75 Ω, negative sync., pin jack × 1  
S-video output  
(Y) 1.0 V (p-p), 75 Ω, negative sync.  
(C) 0.286 V (p-p), 75 Ω, Mini DIN 4-pin × 1  
Component video output  
(Y) 1.0 V (p-p), 75 Ω, negative sync., pin jack × 1  
(PB)/(PR) 0.7 V (p-p), 75 Ω, pin jack × 2  
Audio output (digital output Optical)  
Audio output (digital output Coaxial)  
Audio output (analog output)  
Optical connecter × 1  
0.5 V (p-p), 75 Ω, pin jack × 1  
2.0 V (rms), 320 Ω, pin jack (L, R) × 2  
Specifications and features are subject to change without notice.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integra Division of  
ONKYO U.S.A. CORPORATION  
18 park Way, Upper Saddle River, N.J. 07458, U.S.A.  
Tel: 201-785-2600 Fax: 201-785-2650 http://www.integrahometheater.com  
Integra Division of  
ONKYO CORPORATION  
Sales & Product Planning Div. : 2-1, Nisshin-cho, Neyagawa-shi, OSAKA 572-8540, JAPAN  
Tel: 072-831-8111 Fax: 072-833-5222  
E
W0109-1  
SN 29343266  
Download from Www.Somanuals.com. All Manuals Search And Download.  

InFocus Crib Toy 009 1527 00 User Manual
Jenn Air Ventilation Hood LI3URB W10274314C User Manual
Jensen Clock Radio MR 720 User Manual
Jensen Turntable JTA230 User Manual
JVC Digital Camera GR D91 User Manual
JVC DVD Player XV N330B User Manual
JVC TV VCR Combo TV 20240 User Manual
JVC Webcam VN SE400U User Manual
Kenwood Stereo Receiver KRC 279RA User Manual
KitchenAid Dishwasher KUDI22GT User Manual