COMPONENT
#691248
7.5 AMP RECIPROCATING SAW
INSTRUCTION MANUAL
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION,
MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY AND
UNDERSTAND ALL CAUTIONS, WARNINGS, INSTRUCTIONS AND PRODUCT LABELS. FAILURE TO DO
SO COULD RESULT IN SERIOUS PERSONAL INJURY AND/OR PROPERTY DAMAGE.
FOR CUSTOMER SERVICE
POUR LE SERVICE APRÉS VENTE
OU DU CONSOMMATEUR
IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE
PRODUCT, DO NOT RETURN THIS PRODUCT TO THE STORE. PLEASE CALL OUR CUSTOMER SERVICE
DEPARTMENT AT 1-800-590-3723. BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION
AVAILABLE: MODEL No., DATE PURCHASED AND STORE LOCATION. AN ALLTRADE
REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE. IF YOU WOULD LIKE TO MAKE
A SUGGESTION OR COMMENT, GIVE US A CALL OR EMAIL US AT: INFO@ALLTRADETOOLS.COM.
YOUR FEEDBACK IS VITAL TO US.
87-1904-60957
KAWASAKI™ IS A TRADEMARK LICENSED BY KAWASAKI™ MOTORS CORP.,
U.S.A., WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT.
CONSUMER INQUIRES SHOULD BE DIRECTED TO:
PARA EL SERVICIO
PARA EL CONSUMIDOR
©COPYRIGHT 2007 ALLTRADE TOOLS, LLC.
1431 VIA PLATA
1-800-590-3723
LONG BEACH, CA 90810-1462 USA
691248_7.5 AMP Reciprocating Saw_Rev 3/26/07
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
WORK AREA
CAUTION
indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
Keep your work area clean and well lit.
areas may cause accidents or injury.
Cluttered work benches and dark work
CAUTION
used without the safety alert symbol
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
Do not operate power tools in explosive areas, such as in the presence of
flammable liquids, gases or dust.
the dust or fumes.
Power tools create sparks which may ignite
NOTE
provides additional information that is useful
for proper use and maintenance of this tool. If a
NOTE is indicated make sure it is fully understood.
Keep bystanders, children and visitors away while operating a power tool.
Distractions can cause you to lose control.
IMPORTANT SAFEGUARDS
ELECTRICAL SAFETY
People with electronic devices, such as pacemakers, should consult their
physician(s) before using this product. Operation of electrical equipment in
close proximity to a heart pacemaker could cause interference or failure of
the pacemaker.
Double insulated tools are equipped with a polarized plug (one blade is
wider than the other.) This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlett. Do not change the
WARNING:
Some dust created by power sanding, sawing, grinding, drilling and
plug in any way.
Double insulation
eliminates the need for the three wire
other construction activities contains chemicals known to the State of California
to cause cancer, birth defects or other reproductive harm.
grounded power cord and grounded power supply system.
Avoid body contact with grounded surfaces such as pipes, radiators, ranges
Some examples of these chemicals are:
• Lead from lead-based paints.
and refrigerators
. There is an increased risk of electric shock if your body is
grounded.
• Crystalline silica from bricks and cement and other masonry products,
and arsenic and chromium from chemically-treated lumber.
Do not expose power tools to rain or wet conditions.
tool will increase the risk of electric shock.
Water entering a power
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as dust masks that are
specially designed to filter out microscopic particles.
Do not abuse the cord. Never use the cord to carry the tool or pull the plug
from an outlet. Keep the cord away from heat, oil, sharp edges, or moving
parts. Replace damaged cords immediately
. Damaged cords increase the risk
of electric shock.
WARNING:
Handling the power cord on corded products may expose you to
When operating thhe tool outside, use an outdoor extension cord marked “W-
lead, a chemical known to the State of California to cause cancer and birth
A” or “W. ”
tric shock.
These cords are rated for outdoor use and reduce the risk of elec-
Wash hands after handling.
defects or other reproductive harm.
Make sure the extension cord bbeing used is in good condition.
If there are any
DO NOT
cut or nicks (no matter how deep) in the insulation,
use that cord. Also,
make sure the extension cord is heavy enough to carry the current needed by
DO NOT
the saw (see ELECTRICAL REQUIREMENTS).
use small "around-the-
house” lamp extension cords. These cords can easily overheat and/or catch fire
when used with power tools.
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PERSONAL SAFETY
Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have the
Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool. Do not use tool while tired or under the influence of drugs,
tool serviced before using.
tools.
Many accidents are caused by poorly maintained
alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
Use only accessories that are recommended by the manufacturer for your
model.
Accessories that may be suitable for one tool may become hazardous
when used on another tool.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
jewelry or long hair can be caught in moving parts.
Loose clothes,
SERVICE
Avoid accidental starting. Be sure switch is off before plugging in.
Carrying
tools with your finger on the switch or plugging in tools that have the switch on
invites accidents.
Tool service must be performed only by qualified repair personnel.
maintenance by unqualified personnel may result in a risk of injury.
Service or
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual.
Remove adjusting keys or wrenches before turning the tool “ON”.
key that is left attached to a rotating part of the tool may result in personal injury.
A wrench or a
Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of electric shock or injury..
Do not overreach. Keep proper footing and balance at all times.
Proper foot-
ing and balance enable better control of the tool in unexpected situations.
SPECIFIC SAFETY RULES AND/OR SYMBOLS
Use safety equipment. Always wear eye protection.
Dust mask, non-skid safe-
ty shoes, hard hat, or hearing protection must be used for appropriate conditions..
Hold tool by insulated gripping surfaces when per-
forming an operation where the cutting tool may contact hidden wiring
TOOL USE AND CARE
or its own cord.
Contact with a “live” wire will also make exposed metal
parts of the tool “live” and shock the operator.
Use clamps or other practical ways to secure and support the workpiece to a
SAFETY RULES FOR RECIPROCATING SAWS
stable platform.
Holding the work by hand or against your body is unstable and
may lead to loss of control.
Do not force tool. Use the correct tool for your application.
will do the job better and safer at the rate for which it is designed.
The correct tool
Always wear safety goggles or eye protection when using this tool.
dust mask or respirator for applications which generate dust.
Use a
Do not use tool if the power switch does not turn it “ON” or “OFF”.
not be controlled with the power switch is dangerous and must be replaced.
Any tool that can-
Secure the material being worked on. Never hold it in your hand or across
your legs.
Unstable support can cause loss of control and injury.
When using the Reciprocating Saw, always maintain a firm grip on the tool
with both hands.
Disconnect the power cord plug from the power source before making any
Never put your hands or feet in the cutting area. Do not grasp
adjustments, changing accessories or storing the tool.
Such preventive safe-
the tool or place your hands too close to the blade. Keep your hands well away
from the blade. Never reach underneath the tool while the blade is in motion.
Do not use your legs or feet to stabilize the work piece.
ty measures reduce the risk of starting the tool accidentally.
Store idle tools out of reach of children and other untrained persons.
are dangerous in the hands of untrained users.
Tools
Position yourself to avoid being caught between the tool or side handle and
Maintain tools with care. Keep cutting tools sharp and clean.
tools with a sharp cutting edge are less likely to bind and are easier to control.
Properly maintained
walls or posts.
Should the blade become bound or jammed in the work, it could
result in loss of control and injury.
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SYMBOLS
IMPORTANT:
Some of the following symbols may be used on your tool. Please
Always hold the tool by its insulated gripping surfaces when cutting in areas
that contain live wiring.
study them and learn their meaning. Proper interpretation of these symbols will
allow you to operate the tool better and safer.
If the blade makes contact with a live wire, the metal
parts of this tool may conduct enough electricity to seriously shock the user.
Contact with a “live” wire will make exposed metal parts of the tool “live” and
shock the operator. Do not cut or break into existing walls or other blind areas
where electrical wiring may exist. It this situation is unavoidable, disconnect all
fuses or circuit breakers feeding this worksite.
SYMBOL
NAME
EXPLANATION
Voltage (Potential)
Current
Frequency (Cycles per Second)
Power
V
A
Hz
W
Kg
Volts
Amperes
Hertz
Check to see that keys or adjusting wrenches are removed before turning the
power tool “ON”.
or a bystander.
Keys or wrenches can fly away at high velocity striking you
Watt
Kilograms
Alternating Current
Direct Current
Weight
Type of Current
Type of Current
Do not run the Reciprocating Saw while carrying it at your side.
could cause serious personal injury.
A moving blade
Do not use the Reciprocating Saw if it has been damaged, left outdoors in
the rain, snow, wet or damp environments, or immersed in liquid.
Alternating or Direct Current Type of Current
Earthing Terminal
Class II Construction
Minutes
Grounding Terminal
Denotes Double Insulation
Time
Time
Do not use dull or damaged blades.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
min
s
sharp cutting edges are less likely to bind and are easier to control.
Seconds
When restarting a saw in the workpiece, check that teeth are not engaged in
the material.
Diameter
Size of Drill Bits,
Grinding Wheels, etc.
Keep the handle of the Reciproocating Saw dry, clean, and free from oil and
grease.
No load speed
No-load Rotational Speed
.../min
Revolutions per Minute
Revolutions, Surface Speed,
Strokes, etc. per Minute
Be extra careful when cutting in high or hard-to-reach locations.
lookout for hidden wires and falling debris.
Be on the
1,2,3, …
Ring Selector Settings
Speed, Torque or Position Settings
Maintain labels and nameplates on the Reciprocating Saw.
These carry
important information. If unreadable or missing, contact Alltrade for a replace-
ment.
7
8
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONAL DESCRIPTION
ASSEMBLY
4
6
Disconnect the power plug from the AC power source
before any assembly, adjustments, or adding/removiing accessories.
Following this preventative step reduces the risk of the drill coming on acciden-
tally and the risk of damage to the workpiece and injury to the operator.
2
1
5
ATTACHING / REMOVING BLADE
BLADE CLAMP
3
8
7
INSTALLING THE BLADE
• Rotate the spring-loaded blade holder (1) counter-clockwise as far as it will
turn.
CONTROLS AND COMPONENTS:
1. Adjustable Pivoting Shoe
2. Blade Clamp
• Fully insert the appropriate blade (2) into the slot in the center of the blade
holder.
3. Locking Lever
4. Variable Speed Control Wheel
5. Lock-Off Button
6. Trigger Switch
NOTE
: Make sure the blade is fully inserted into the blade collar and the blade
teeth are pointing downward.
• While holding the blade fully into the blade holder, release the collar. It will auto-
matically return to its original position, locking the blade in the holder.
7. Power Cord
ACCESSORIES:
8. Saw Blades (2)
• Pull outward on the blade to ensure it is properly locked in the blade holder.
REMOVING THE BLADE
To remove the blade, simply rotate the blade holder counter-clockwise and pull the
blade out of the blade holder.
ADJUSTING THE PIVOTING SHOE
The pivoting shoe will pivot to follow the angle of the blade to the workpiece. This
action ensures the flat surface of the shoe is against the workpiece for better cut-
ting action and easier control of the saw.
The shoe can be adjusted in or out, allowing the use of the blade teeth at different
points of the blade. This will provide longer blade life as one section of the blade
becomes dull.
9
10
Download from Www.Somanuals.com. All Manuals Search And Download.
• To adjust the pivoting shoe, pull the Locking Lever upward to release the
pivoting shoe.
LOCK-OFF BUTTON / TRIGGER SWITCH
The lock-off button (1) is a safety device designed to reduce the possibility of
accidentally starting the saw. This button must be depressed before the trigger
switch (2) can be depressed.
• Slide the pivoting shoe in or out until it is in the appropriate position.
• Lock the pivoting shoe in place by releasing the Locking Lever.
• Pull outward on the pivoting shoe to ensure it is firmly in place.
To turn the saw ON, depress and hold the lock-off button and squeeze the trigger
switch. Once the saw starts, release the lock-off button. The saw will remain
running until the trigger switch is released.
NOTE:
The saw will run at the speed selected on the speed control wheel.
To turn the saw OFF, release the trigger switch.
NOTE:
The saw will not restart until you depress the lock-off switch and squeeze the
trigger switch.
OPERATING THE RECIPROCATING SAW
Never tape the trigger switch down to provide continuous
high speed.
injury.
The tool may fail under such conditions causing fire or personal
GENERAL CUTTING
The lock-off button helps prevent accidental starting.
This button can be pressed from either side.
VARIABLE SPEED CONTROL WHEEL
Always hold the saw in front of you and away from your body. Keep your
hands and feet well away from the work piece.
The variable speed control wheel (1) controls
the speed at which the saw will run. To set the
speed control at the slowest speed, rotate the
speed control wheel toward MIN on the dial. To
set the speed control at the fastest speed,
rotate the speed control wheel backward to
MAX. To select intermediate speeds, rotate the
speed control to an appropriate position
between MAX and MIN on the speed control
wheel.
Never feed the blade into the work piece until the blade is at full speed.
If the blade is not at full speed, the saw may kick back causing serious
personal injury.
Use proper bladde for the particular cutting application.
Do not force the saw. Excessive force may result in a
broken blade.
work piece.
Use only enough pressure to keep the saw moving through the
11
12
Download from Www.Somanuals.com. All Manuals Search And Download.
• Put on eye protection.
METAL CUTTING
• Clear the saw of any
foreign material.
Never use gasoline or any flammable liquid as a
lubricant. Sparking from the motor may cause it to ignite into flames.
• Make sure the work piece is
held securely in place. Hold
smaller pieces in a vise or
attach to the workbench
with clamps.
• When cutting metals other then copper, brass or aluminum, always use a lubricant,
such as cutting oil, to keep the blade cool. This will prolong the life of the blade as
well as speeding up the cutting process.
• Make sure the work piece is held securely in place. Hold smaller pieces, such as
pipe or conduit, in a vise or attach to the workbench with clamps.
• Mark out the line to be cut
so it is easily visible.
• To eliminate vibration, always cut close to the clamping point.
• Pull the trigger to start the
saw.
• When cutting thin sheets of metal, place a piece of plywood on either side to control
vibration and prevent tearing.
• Set the shoe against the work piece.
OIL
• When the blade reaches full speed, slowly feed the blade into the work piece.
PLUNGE CUTTING
Never feed the blade into the work piece until the blade
is at full speed. If the blade is not at full speed, the saw may kick back
causing serious personal injury.
• Mark out the line to be cut so
it is easily visible.
• Start inside the area to be cut
out.
• Depress the lock-on button
and press the trigger
to start the saw.
MAINTENANCE AND CLEANING
Always UNPLUG the tool from the power source before
cleaning or maintenance.
• Set the shoe against the work
piece.
• When the blade reaches full
speed, slowly feed the blade into the work piece.
This Reciprocating Saw is lubricated before
it leaves the factory.
This lubrication should last for the life of the tool. No
further lubrication is required.
13
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Use only mild soap and a damp cloth to clean the tool.
inside the casing. Never immerse any part of the tool in a liquid. Always keep the
ventilation openings clear.
Never let any liquid get
SPECIFICATIONS
SPECIFICATIONS
Regularly clean the ventilation slots in yoour tool and charger using only a soft
brush or dry cloth.
Voltage
120V
7.5 A
30mm (1 3/16")
800-2400/min
Variable Speed with Brake
60 Hz
Rated Current
Length of Stroke
No Load Speed (SPM)
Switch
Inspect all mounting screws regularly. Tigghten any loose screws. Failure to keep
the mounting screws tight could result in serious injuries.
Never open the Reciprocating Saw case.
Do not attempt to repair the
Reciprocating Saw yourself. Opening any of these parts will void your warranty.
OTHER CONSUMER DO-IT-YOURSELF (DIY) TOOLS
ACCESSORIES
Alltrade offers a full range of Kawasaki™ tools that make DIY jobs easy. If you would
like further information on the following products, please contact Alltrade Customer
Service Department at 1-800-590-3723.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Cordless Drills/Screwdrivers
Impact Wrenches
Sanders
Always attach grounded (3-prong) extension cords to grounded (3-hole) outlets.
If you must use an extension cord, be suree that the gauge is large enough to carry
the amount of current necessary for your power tool.
If not, your tool may experi-
ence a loss of power, excessive voltage drop or overheating. The smaller the gauge
number, the heavier the cord (see table on the next page).
Jigsaws
Circular Saws
RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS
Angle Grinders
TOOL CURRENT RATING
CONDUCTOR SIZE IN A.W.G
Reciprocating Saws
Routers
AMPERE
3-6
6-8
8-10
10-12
12-16
16-20
10FT.
18
18
18
16
25FT.
18
50FT.
18
100FT.
18
16
14
14
-
Rotary Tools
18
18
18
18
Corded and Cordless Multi-Purpose Tools
Wide Range of Accessories and more.
16
14
14
12
12
12
12
12
-
15
16
Download from Www.Somanuals.com. All Manuals Search And Download.
found to be defective and subject to warranty. Alltrade retains the sole discretion
to determine whether any item or part is nonconforming and, if so, whether the
item and/or part will be repaired and/or replaced. If the unit is repaired, new or
reconditioned replacement parts may be used. If Alltrade chooses to replace
the product, it may replace it with a new or reconditioned one of the same or
comparable design. The repaired or replaced unit will be warranted under the terms
of the remainder of the warranty period. Typically, a defective product that is
returned within the first 30 days after the purchase date will be replaced; for items
returned after the first 30 days and within the warranty period, covered defective
parts not subject to normal wear and tear or other exclusions will be repaired or
replaced, at Alltrade’s option. During the warranty period, Alltrade will be responsi-
ble for the return shipping charges. Alltrade’s repair and/or replacement of any non-
conforming item and/or part thereof shall constitute fulfillment of all
obligations to the purchaser. Alltrade shall not be responsible or liable for any
expense, including freight charges, or repairs made outside Alltrade’s facility, unless
expressly agreed to by Alltrade in writing. Under no circumstances shall Alltrade
bear any responsibility for loss of the unit, loss of time or rental, inconvenience,
commercial loss or consequential damages.
3 YEAR LIMITED WARRANTY
Express and Exclusive Limited Warranty to Original Retail Buyer
Alltrade Tools LLC (hereinafter "Alltrade") expressly warrants to the original retail
purchaser of the accompanying KAWASAKI™ power tool and no one else all parts
of the product (except those parts referred to below which are specifically exclud-
ed from such warranty (see Exclusions)) to be free from defects in materials and
workmanship for a period of three years from original date of purchase, except that
such warranty with regard to the battery shall be for a period of two years from
original date of purchase, unless the tool is used for commercial or rental
purposes.
SPECIAL WARRANTY NOTE FOR COMMERCIAL OR RENTAL USE:
The above
warranty for this Kawasaki™ power tool, including the battery, shall be effective for
only 90 days from the original date of purchase if this tool is used for any
COMMERCIAL OR RENTAL PURPOSE.
The date of purchase shall be the date of shipment to the original purchaser, or the
date the original purchaser took possession, custody or control of the product,
whichever occurred first. This warranty shall be null and void if the product or any
component thereof is modified or altered. This warranty does not apply to any
other product and/or component thereof manufactured or distributed by Alltrade,
and does not apply to products and/or components thereof designed, manufactured
and/or assembled by others, for which Alltrade makes no warranties whatsoever.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON
THE FACE HEREOF.
Exclusions
This warranty does not cover parts damaged due to normal wear, abnormal
conditions, misapplication, misuse, abuse, accidents, operation at other than
recommended pressures or temperatures, improper storage or freight damage.
Parts damaged or worn by operation in dusty environments are not warranted.
Failure to follow recommended operating and maintenance procedures also
voids warranty.
Warranty Performance
This limited warranty does not apply to accessory items such as drill bits,
screwdriving bits, circular saw blades, jigsaw blades, grinding wheels, sanding
sheets and other related items.
By purchasing the product, purchaser expressly acknowledges and agrees that their
sole and exclusive remedy under this warranty shall be strictly limited to the repair
or replacement of any covered nonconforming items or parts thereof provided that
any such nonconforming item and/or part is promptly returned to Alltrade’s facility
postage pre-paid and insured (address: ALLTRADE Warranty Claims & Repair,
1431 Via Plata, Long Beach, CA 90810, Attn: Customer Service #1-800-590-3723)
within the applicable warranty period, with a written request by purchaser that
Alltrade repair and/or replace the nonconforming item and/or part. We recommend
that you keep the original product packaging in the event you need to ship the unit.
We suggest the package be insured against loss or in transit damage. When
sending your product include your name, address, phone number, dated proof
of purchase (or copy), and a statement about the nature of problem. Warranty
coverage is conditioned upon purchaser furnishing Alltrade with adequate written
proof that they are the original purchaser and of the original purchase date. Parts
returned, freight prepaid and insured, to Alltrade’s facility (see above address) will
be inspected and, at Alltrade’s option, repaired and/or replaced free of charge if
DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING, ACCIDENT, ABUSE,
NEGLIGENCE, FAILURE TO FOLLOW INSTRUCTIONS, UNAUTHORIZED REPAIRS
OR ALTERATIONS, DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY,
USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES,
COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO
PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS
WARRANTY.
Alltrade will not be liable for the following: labor charges, loss or damage resulting
from improper operation, maintenance or repairs made by other persons;
pre-delivery services such as assembly, oil or lubricants, and adjustment;
maintenance services that are normally required to maintain the product.
The use of other than genuine Alltrade Repair Parts will void warranty.
17
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty Disclaimers
Limitation Of Liability
EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES,
GUARANTIES AND/OR REPRESENTATIONS. EXCEPT FOR THE LIMITED WARRANTY
PROVIDED ABOVE, ALL OTHER EXPRESS WARRANTIES, GUARANTIES AND/OR
REPRESENTATIONS BY ALLTRADE AND/OR ITS REPRESENTATIVE(S) REGARDING
THE DESIGN, MANUFACTURE, PURCHASE, USE AND/OR OPERATION OF THE
PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER, REGARDLESS OF
WHETHER ANY SUCH WARRANTY, GUARANTY AND/OR REPRESENTATION,
WRITTEN OR ORAL, ARISES BY OPERATION OF LAW AND/OR EQUITY AND/OR BY
ANY ACT OR OMISSION OF ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE
BUYER, ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE
AND/OR ITS REPRESENTATIVES. PURCHASER KNOWINGLY AND WILLINGLY
WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS, CLAIMS AND/OR
CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON. PURCHASER’S
SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE.
IN NO EVENT SHALL ALLTRADE AND/OR ITS REPRESENTATIVE(S) BE LIABLE FOR
INDIRECT, INCIDENTAL, SPECIAL AND/OR CONSEQUENTIAL DAMAGES OF ANY
KIND ARISING OUT OF OR RELATED TO, DIRECTLY OR INDIRECTLY, ANY BREACH
OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND/OR ITS
REPRESENTATIVE(S) AND PURCHASER, ANY WARRANTY HEREUNDER,
AND/OR THE EXISTENCE, DESIGN, MANUFACTURE, PURCHASE, USE AND/OR
OPERATION OF ANY ITEM(S) SOLD HEREUNDER EVEN IF ALLTRADE AND/OR ITS
REPRESENTATIVE(S) HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH
DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT,
WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL
ALLTRADE’S AND/OR ITS REPRESENTATIVE(S)’ LIABILITY EXCEED THE PRICE OF
THE PRODUCT. ANY AND ALL LIABILITY CONNECTED WITH THE USE OF
THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY
PERIODS SPECIFIED ABOVE.
Limitations on Warranty Disclaimers
EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES, INCLUDING THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. NO WARRANTY, ORAL OR WRITTEN, OTHER THAN THE ABOVE
WARRANTY IS MADE WITH REGARD TO THIS PRODUCT. ALL EXPRESS AND/OR
IMPLIED WARRANTIES, GUARANTIES AND/OR REPRESENTATIONS BY ALLTRADE
AND/OR ITS REPRESENTATIVE(S) REGARDING THE DESIGN, MANUFACTURE,
PURCHASE, USE AND/OR OPERATION OF THE PRODUCT OR ANY COMPONENT
THEREOF SOLD HEREUNDER, REGARDLESS OF WHETHER ANY SUCH WARRANTY,
GUARANTY AND/OR REPRESENTATION, WRITTEN OR ORAL, ARISES BY
OPERATION OF LAW AND/OR EQUITY AND/OR BY ANY ACT OR OMISSION OF
ALLTRADE AND/OR ITS REPRESENTATIVE(S), OR THE PURCHASER, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
EXCLUDED AND DISCLAIMED BY ALLTRADE AND/OR ITS REPRESENTATIVES.
PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH
WARRANTIES AND RIGHTS, CLAIMS AND/OR CAUSES OF ACTION ARISING
THEREFROM OR BASED THEREON. PURCHASER’S SOLE AND EXCLUSIVE
REMEDY IS AS STATED ABOVE.
Some states do not allow limitations on how long an implied warranty lasts
and some states do not allow the exclusion or limitation of the incidental or
consequential damages, so part or all of the above limitations or exclusions may not
apply to you. This warranty gives you specific legal rights, and you may also have
other rights which vary from state to state.
If your product is not covered by this warranty, please call our Customer Service
Department toll free at 1-800-590-3723 for general repair information and charges.
19
20
Download from Www.Somanuals.com. All Manuals Search And Download.
|