JLDWS1202
Dishwasher
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagram of Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
4
6
6
Prior to Using for the First Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the Water Softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
Adding Dishwasher Salt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Filling Up with Rinse Aid. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Activating/Deactivating the Acoustic Signal . . . . . . . . . . . . . . . . . . . . . . . . . 13
In Daily Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Loading Cutlery and Dishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting the Height of the Upper Basket . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Adding Detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Using 3in1 Detergents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Selecting the Dishwashing Cycle (Cycle Table). . . . . . . . . . . . . . . . . . . . . . . . 21
Starting a Dishwashing Cycle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Setting the Delay Timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Switching Off the Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
What to do if.... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Remedying Small Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
If the Dishwashing Results are not Satisfactory. . . . . . . . . . . . . . . . . . . . . . . 28
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Notes for Test Institutes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installation and Connection Instructions . . . . . . . . . . . . . . . . 32
Safety Information for the Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Installing the Dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Connecting the Dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Electrical Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Service and Spare Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
1 Safety
Prior to using for the first time
• Follow the ”Instructions for installation and connection”.
Correct Use
• The dishwasher is only intended for washing domestic dishes.
• Additions or modifications to the dishwasher are not permitted.
• Use only special salt, detergent and rinse aid suitable for domestic
dishwashers.
• Do not put any solvents in the dishwasher. This could cause an explo-
sion.
Child Safety
• Keep packaging away from children. There is a risk of suffocation.
• Children often do not recognise the hazards associated with electrical
appliances. Don’t allow children to use the dishwasher unsupervised.
• Make sure that children and pets don’t climb into the dishwasher.
Could endanger life!
• Dishwasher detergents can cause chemical burns to the eyes, mouth
and throat. Could endanger life! Comply with the safety instructions
of the dishwasher detergent manufacturer.
• The water in the dishwasher is not for drinking. Risk of chemical
burns.
• This appliance is designed to be used by adults.
• Children should not be allowed to tamper with the controls or play
with the product.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
General Safety
• Repairs to the dishwasher are only to be carried out by qualified/au-
thorised service engineers.
• When the dishwasher is not being used, switch it off and shut off the
water tap.
• Never unplug the appliance by pulling on the cable. Always pull the
plug.
• Ensure that the door of the dishwasher is always closed when it is not
being loaded or unloaded. In this way you will avoid anybody tripping
over the open door and hurting themselves.
• Never sit or stand on the open door.
• If the dishwasher is located in a room where there may be a frost, re-
move the connection hose from the tap after each use of the dish-
washer.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Diagram of Appliance
Top Spray Nozzle
Upper basket spray arm
and lower spray arm
Water softener
unit.
Salt Container
Detergent
Dispenser
Rinse aid
dispenser
Rating plate
Filters
Control Panel
To use the appliance, always open the dishwasher door first.
ON/OFF button
The ON/OFF button is used to turn the dishwasher on and off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Set delay
timer
Programme buttons
Select
3 in1 function
1
2
3
Control
indicators
Multi-display
Function buttons
The Programme buttons are used to select the desired dishwashing cy-
cle.
Function buttons: In addition to the pre-set dishwashing cycle, the
following functions can also be set using these buttons:
Function button 1
Function button 2
Function button 3
Sets the water softener
Activates/deactivates rinse aid dispenser
Activates/deactivates the acoustic signal
The multi-display can indicate:
– the level of hardness to which the water softener is set.
– whether the rinse aid dispenser has been activated/deactivated.
– whether the acoustic signal has been activated/deactivated.
– the start delay that has been set.
– the estimated time remaining for the current dishwashing cycle.
– what type of error has occurred with the dishwasher.
The control indicators have the following meanings:
1)
Salt
Refill with dishwasher salt
Refill with rinse aid
Turn on the tap
1)
Rinse aid
Water
1) These control indicators are never illuminated while a dishwashing cycle is running.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Prior to Using for the First Time
1.Set the water softener
2.Fill up with dishwasher salt
3.Fill up with rinse aid
3 If you wish to use 3in1 detergent, do the following:
– First read the section “Using 3in1 detergents”.
– Switch on the dishwasher, press 3in1 button. The button indicator
lights up: 3in1 function is selected. As a result
– there is no need to fill up with dishwasher salt or rinse aid.
– there is no need to set the water softener.
– do not switch off the rinse-aid addition function.
– Before the start of the dishwashing cycle put 3in1 detergent in the
detergent dispenser.
Setting the Water Softener
The water softener must be set manually and electronically:
3 To avoid scale deposits on the dishes and in the dishwasher, the dishes
must be washed with soft water, i.e. water with a low lime content. The
water softener must be set according to the table to the water hard-
ness in the area where you live. Your local water company will be able
to give you information about the water hardness in your area.
The dishwasher must be switched off.
Setting manually:
1.Open the dishwasher door.
2.Remove the lower basket from the
dishwasher.
3.Turn water hardness dial on the left
wall of the dishwasher interior to O
or 1 (see table).
Setting electronically:
1.Press the ON/OFF button.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 If the LED indicator of only one programme button is illuminated, this
wash programme has been activated. The wash programme must be
deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the buttons that can be selected will illumi-
nate.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4.Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5.When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to “1”, this switches off the
control indicator for dishwasher salt.
Setting for
Water hardness
in
Number
of
water hardness
Indicator
on the multi-
display
acoustic
in
1)
Range Manual
Electronic
signals
2)
3)
°d
mmol/l
4)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
9.0 - 12.5
7.6 - 8.9
6.5 - 7.5
5.1 - 6.4
4.0 - 5.0
10
9
8
7
6
10L
9L
8L
7L
10
9
8
7
6
IV
III
1
6L
19 - 22
15 - 18
3.3 - 3.9
2.6 - 3.2
5
4*
5L
4L
5
4
11 - 14
4 - 10
1.9 - 2.5
0.7 - 1.8
II
3
2
1
3L
2L
3
2
0*
I/II
below 4 below 0.7
I
no salt
required
1L
1
1) The water hardness will only be indicated acoustically if the acoustic signal has been
activated.
2) (°d) German degree, measure of the hardness of water
3) [mmol/l] millimol per litre, international unit for water hardness
4) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Dishwasher Salt
To decalcify the water softener, it must be filled up with dishwasher
salt. Use only special salt suitable for domestic dishwashers.
If you do not use 3 in1 detergent, fill up with dishwasher salt:
– Before using the dishwasher for the first time.
– When the control indicator for dishwasher salt is illuminated on the
control panel.
1.Open the door and remove the low-
er basket.
2.Unscrew the lid on the salt dispens-
er by turning it anti-clockwise.
3.Only when using the dishwasher
for the first time:
Fill the salt dispenser with water.
4.Place the funnel (supplied) over the
dispenser opening.
Fill the dispenser with dishwasher
salt; the capacity of the dispenser is
approx. 1.0-1.5 kg, depending on
the size of the grains. Do not overfill
the dispenser.
3 If water overflows when filling up with dishwasher salt, this is com-
pletely harmless.
5.Clean away any salt remnants from the dispenser opening.
6.Screw the lid back on in a clockwise direction.
7.Run a dishwashing cycle after filling the salt dispenser with dish-
washer salt. This will wash away salt water and salt crystals that have
been spilt.
3 Depending on the size of the salt granules, it can take several hours for
the salt to dissolve in the water and for the control indicator for dish-
washer salt to go out.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Filling Up with Rinse Aid
Rinse aid causes the rinse water to flow easily from the crockery leav-
ing gleaming dishes and glassware.
If you do not use 3in1 detergent, fill up with rinse aid:
– Before using the dishwasher for the first time.
– When the control indicator for rinse aid is illuminated on the control
panel.
Use only special rinse aid for dish-
washers.
1.Open the door.
The rinse aid compartment is locat-
ed on the inside of the dishwasher
door.
2.Press the release button on the rinse
aid compartment.
3.Open the cover.
4.Pour rinse aid in slowly right up to
the broken “max” line;
this corresponds to a volume of ap-
prox. 140 ml when full.
5.Press the lid shut until it clicks into
place.
6.Wipe up any spilt rinse aid with a
cloth. Otherwise there will be too
much foam when rinsing.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Amount of Rinse Aid Required
3 Only change the amount dispensed, if smears, milky spots (reduce the
amount) or dried on water spots (increase the amount) can be seen on
glasses and dishes. (See section “If dishwashing results are not satisfac-
tory”.) The dosage can be set from 1-6. The dosage is pre-set to “4” in
the factory.
1.Open the dishwasher door.
2.Press the release button on the rinse
aid compartment.
3.Open the cover.
4.Set the dosage level.
5.Press the lid shut until it clicks into
place.
6.If rinse aid has leaked out, wipe it
away with a cloth.
Activating/Deactivating the Rinse Aid dispenser
If the 3 in1 button is pressed, you do not need to deactivate the rinse
aid dispenser.
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this
wash programme has been activated. The wash programme must be
deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the buttons that can be selected will illumi-
nate.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 2.
The LED indicator for function button 2 will flash.
The multi-display will indicate the current setting:
0d
1d
Rinse aid dispenser is deactivated
Rinse aid dispenser is activated (factory setting)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Pressing function button 2 activates and deactivates the rinse aid dis-
pensing function.
5.Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
Activating/Deactivating the Acoustic Signal
In addition to the optical display (e.g. indicating the end of the cycle,
errors) you can also choose to set an acoustic signal.
1.Press the ON/OFF button.
3 If the LED indicator of only one programme button is illuminated, this
wash programme has been activated. The wash programme must be
deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the buttons that can be selected will illumi-
nate.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.Press function buttons 2 and 3 simultaneously and hold them down.
The LED indicators for function buttons 1 to 3 will flash.
3.Press function button 3.
The LED indicator for function button 3 will flash.
The multi-display will indicate the current setting:
0b
1b
Acoustic signal deactivated
Acoustic signal activated (ex-factory setting)
4.Pressing function button 3 will change the setting.
5.Once the multi-display is indicating the required setting, press the ON/
OFF button. The setting is now saved.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
In Daily Use
Loading Cutlery and Dishes
1 Sponges, cleaning cloths and any other objects that can absorb water
must not be washed in the dishwasher. Plastic and Teflon-coated dishes
and pans tend to retain water droplets. These dishes and pans therefore
do not dry as well as those made of china and stainless steel.
For washing in the dishwasher, the following cutlery/dishes/pots and pans
are not suitable:
are of limited suitability:
• Cutlery with wooden, horn,
china or mother of pearl han-
dles
• Plastic items that are not heat
resistant
• Older cutlery with cement
that is sensitive to temperature
• Dishes or cutlery with glued
parts
• Pewter or copper items
• Lead crystal glass
• Only wash stoneware in the dishwasher if it is
specifically marked by the manufacturer as
being dishwasher-safe.
• Glazed patterns may fade if washed very fre-
quently in the dishwasher.
• Silver and aluminium parts have a tendency to
discolour during washing. Food remains, e.g.
egg white, egg yolk and mustard often cause
discoloration and staining on silver. Therefore
always clean food residues from silver immedi-
ately, if it is not to be washed straight after
use.
• Steel items that rust
• Wooden boards/platters
• Items made from synthetic ma-
terials
• Glass can become dull after a large number of
washes.
• Before loading the dishes, you should:
– Remove the worst of the food residues.
– Soak pans with burnt-on food residues.
• When loading the dishes and cutlery, please note:
– Dishes and cutlery must not impede the rotation of the spray arms.
– Load bowls, cups, glasses, pans, etc. with the opening downwards so
that water cannot collect in them
– Dishes and items of cutlery must not lie inside one another or cover
one another
– To avoid damage to glasses, they must not touch one another
– Don’t put small items (e.g. lids) in the baskets for the dishes, but in
the cutlery basket, so that they can’t fall through the holes.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading cutlery
1 Warning: Sharp knives and other items of cutlery with sharp edges
must be laid in the cutlery rack or in the upper basket to avoid the risk
of injury.
To ensure that all items of cutlery in the cutlery basket can be reached
by the water, you should:
1.Place the grid insert on the cut- 2.Place forks and spoons in the
lery basket
cutlery basket's grid insert with
their handles pointing down-
wards.
For larger utensils, such as whisks, leave off one half of the cutlery grid.
The cutlery basket can be opened
out.
Always make sure that you put your
hand around both parts of the two-
part handle when removing it from
the dishwasher.
1.Place the cutlery basket on a table
or work surface.
2.Open out the two-part handle.
3.Remove cutlery.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Pots, Pans, Large Plates
Load larger and heavily soiled dishes
and pans in the lower basket.
(Max. diameter for plates 29 cm).
To make it easier to load larger dish-
es, all rear plate rests in the lower
basket can be folded down.
Cups, Glasses, Coffee Service
Load smaller, fragile crockery and
long, sharp cutlery in the upper bas-
ket.
• Arrange items of crockery on and
under the folding cup racks so
that they are offset from each
other and water can reach all
items.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
• The cup racks can be folded up
out of the way for tall crockery
items.
• Lay or hang wine and brandy
glasses in the slots in the cup
racks.
• For glasses with long stems, fold
the glass rack to the right, other-
wise fold it away to the left.
• The row of spikes on the left of
the upper basket is also in two
parts and can be folded away.
Spikes not folded away: place
glasses, mugs etc. in the upper
basket.
Spikes folded away: More room
for serving dishes.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Height of the Upper Basket
Maximum height of dishes in the
Upper basket
Lower basket
with upper basket raised
with upper basket lowered
22 cm
24 cm
30 cm
29 cm
3 The height of the baskets can also be adjusted when they are loaded.
Raising/Lowering the Upper Bas-
ket
1.Pull out the upper basket complete-
ly.
2.Raise the upper basket as far as it
will go and then lower it vertically.
The upper basket will latch into the
lower or the upper position.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding Detergent
Detergents remove the dirt from
dishes and cutlery.
The detergent must be added before
the cycle starts.
1 Only use detergent intended for do-
mestic dishwashers.
The detergent compartment is lo-
cated on the inside of the door.
1.If the lid is closed:
Press the release button.
The lid will spring open.
2.Place the detergent in the detergent
dispenser. The markings indicate the
dosing levels for powder detergents:
“20/30” corresponds to approx.
20/30 ml of detergent.
Follow the manufacturer’s instruc-
tions with regard to dosing and
storage.
3.Close the lid and press until it locks
into place.
3 In the case of very heavily soiled
dishes, fill the adjoining compart-
ment (1) with additional detergent.
This detergent comes into use during the pre-wash cycle.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Concentrated detergents
Today’s detergents for dishwashers are almost exclusively low-alkaline
concentrated detergents with natural enzymes in tablet or powder
form.
2 Using 50°C dishwashing cycles in conjunction with these concentrated
detergents reduces pollution and is good for your dishes, as these dish-
washing cycles are specially matched to the dirt-dissolving properties
of the enzymes in concentrated detergents. It is for this reason that us-
ing 50 °C dishwashing cycles in conjunction with concentrated deter-
gents can achieve the same cleaning results that can otherwise only be
achieved using 65 °C cycles.
Detergent tablets
3 Detergent tablets from different manufacturers dissolve at different
rates. For this reason, some detergent tablets do not attain their full
cleaning power during short cycles. Therefore please use dishwashing
cycles with pre-wash when using detergent tablets.
Using 3in1 Detergents
These products are detergents with a combined cleaning, rinsing and
salt function.
1.Check whether these detergents are suitable for your water hard-
ness. Follow the manufacturer’s instructions.
2.Place detergent just in the detergent dispenser.
3 If you use 3 in1 detergent, it may come about because of the different
quality standards in the detergent, that the dishes do not dry suffi-
ciently.
If so, proceed as follows (see section “Adding rinse aid”):
• Fill up the dispenser (if this is empty) with rinse aid.
• Set rinse aid dosage to “2” mechanically.
• Activate rinse aid dispenser.
If you want to stop using 3in1 products, please do the following:
• Fill up the dispensers for salt and rinse aid again.
• Switch the water softener to the highest setting and perform up to
three normal cycles without loading any dishes.
• Then set the water softener to the water hardness in your area.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Dishwashing Cycle (Cycle Table)
Programme
sequence
Consumption
1)
values
Dishwashing-
cycle
Suitable
for:
Type of
soiling
heavily soiled,
Dinner serv-
ice and
cookware
dried-on food re-
mains, in particular
protein and starch
70°Intensive
Automatic
•
•
•
•
•
•
•
•
Dinner serv-
ice and
cookware
normally soiled,
dried-on food remains
2)
(50° - 65°)
Dinner serv-
ice and
cookware,
temperature-
sensitive
3)
50°Economy
normally soiled
•
•
•
•
•
crockery
Dishes, ex-
cluding
saucepans
Quick wash
just used, lightly to
normally soiled
-
•
-
•
-
4)
(60°)
1) The consumption values were obtained under standardised conditions. They depend on how
full the baskets for the dishes are. Variations are therefore possible in practice.
2) When using this cycle the degree of water clouding determines the amount of soiling on the
dishes. The length of the cycle and water and energy consumption can vary greatly – de-
pending upon the load and how dirty the dishes are. Depending upon the soiling, the tem-
perature of the water will be automatically adjusted to between 50°C and 65°C.
3) Test programme for Test Institutes
4) When using this cycle, only load the dishwasher half full.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting a Dishwashing Cycle
1.Check that the spray arms can turn freely.
2.Turn the water tap on fully.
3.Press the ON/OFF button.
4.Select the desired cycle.
The programme indicator comes on. The remaining time expected for
the cycle will be shown in the multi-display.
3 During the dishwashing cycle, the remaining time shown in the multi-
display may be adjusted according to the size of the load, degree of
soiling, etc.
5.Close the door. The dishwashing cycle will begin.
A light signal in the form of a dot appears at floor level.
3 If the dishwasher is built in at high level with flush fitting cupboard
doors around it, the light signal cannot be seen.
The dot shaped light signal is not dangerous. (It is not a laser.) It lights
up while a dishwasher cycle is running and goes out when the cycle
ends.
Interrupting or Cancelling a Dishwashing Cycle
Only interrupt a dishwashing cycle that is in progress if it is absolutely
necessary.
Interrupting the dishwashing programme by opening the dishwash-
er door
1 Hot steam may escape when the door is opened. There is a risk of scald-
ing.
1.Open the door carefully. The dishwashing cycle will stop.
2.Close the door. The cycle will continue.
Cancelling the dishwashing cycle
1.Press function buttons 2 and 3 and keep them pressed.
The LED indicators of all the buttons that can be selected light up.
Exception: The 3in1 button will only illuminate if the function has been
activated.
2.Release the function buttons. The dishwashing cycle has been can-
celled.
3.If you want to start a new cycle, check whether there is any detergent
in the dispenser.
4.Switch off using the ON/OFF button.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Delay Timer
3 With the delay timer you can delay the start of a dishwashing cycle for
between 1 and 19 hours.
1.Press the Delay Timer button repeatedly until the multi-display shows
the desired time delay, for example 12h, if the cycle is to start in
12 hours. The Delay Timer indicator is illuminated.
2.Select dishwashing cycle.
3.The time remaining to the start of the cycle is continuously displayed
(e. g. 12h, 11h, 10h, … 1h etc.).
To change the time delay:
As long as the cycle has not yet started, you can still change the setting
by pressing the DELAY TIMER button.
Cancelling the time delay:
Press the Delay Timer button repeatedly until the length of the selected
cycle appears in the multi-display. The selected dishwashing cycle will
begin immediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still change the dish-
washing cycle. First cancel the dishwashing cycle, then re-set the time
delay, lastly select the new dishwashing cycle.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching Off the Dishwasher
When the dishwasher cycle has ended, the dot-shaped light signal be-
low the door of the appliance goes out.
If the acoustic signal has been enabled, a continuous tone will sound
for 15 seconds at the end of the dishwashing cycle.
If the dishwasher door is not opened, the acoustic signal sounds again
after 3 and 6 minutes.
With some dishwashing cycles, the drying fan continues to run even af-
ter the end of the cycle.
1 Carefully open the door. Hot steam may escape.
Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for
about 15 minutes before removing them. You also get a better drying
result.
1.Press the ON/OFF button. All display indicators will go out.
2.Turn off the water tap.
Removing the Dishes
3 It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you
avoid dripping water from the upper basket onto dishes in the lower
basket.
Care and Cleaning
1 Do not use furniture care products or aggressive cleaners.
• When necessary, clean the dishwasher’s controls with a soft cloth.
• Occasionally check the internal dispensers, door seal and water inlet
filter (if fitted) for dirt and clean them, if necessary.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Filters
3 The filters must be regularly checked
and cleaned. Dirty filters will spoil the
wash results.
1.Open the door and remove the lower
basket.
2.Turn the handle about ¼ of a turn
anticlockwise (A) and remove the fil-
ter system (B).
3.Grasp the grip hole on the fine filter
(1) and remove it from the micro-fil-
ter (2).
4.Clean all filters thoroughly under
running water.
5.Remove the flat filter (3) from the
base of the washing compartment
and clean both surfaces thoroughly.
6.Reinsert the flat filter.
7.Place the fine filter in the micro-fil-
ter and fit the two together.
8.Reinsert the filter system and lock it
by turning the handle clockwise as
far as it will go. Ensure that the flat
filter does not protrude above the
base of the washing compartment.
1 Under no circumstances may the dishwasher be used without its filters.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
What to do if...
Remedying Small Malfunctions
In the event of a fault, the light signal at floor level flashes.
If the acoustic signal is activated, warning tones sound if there are
faults.
If one of the following fault codes is displayed in the multi-display dur-
ing operation:
– Fault codeÅ10 (Problems with water inlet),
– Fault codeÅ20 (Problems with water drainage),
please have a look at the following table.
When the fault is remedied, press the button for the cycle that has
started. The cycle will continue.
With other fault codes (“Å” followed by a number):
– Cancel the dishwashing cycle.
– Switch the appliance off and on again.
– Re-set the dishwashing cycle.
If the fault is displayed again, please contact your local Service Force
Centre and inform them of the fault code.
Malfunction
Possible cause
Remedy
Water tap is blocked with
limescale or faulty.
Check the water tap and
have it repaired if necessary.
The tap is turned off.
Turn the tap on.
1 short warning tone
The filter (where present) in
continuously repeated can the threaded hose fitting
Clean the filter in the
threaded hose fitting.
be heard,
on the tap is blocked.
the cycle indicator for the
selected dishwashing cycle
is flashing:
fault code Å10 is dis-
played in the multi-dis-
play:
Press the button for the
commenced dishwashing
cycle;
then cancel the dishwashing
cycle (see section: Starting a
dishwashing cycle);
Filters in the base of the
dishwasher compartment
are blocked.
(Problems with water in-
let)
clean filters (see section:
Cleaning the filters).
Water inlet hose
has not been correctly posi-
tioned.
Check the position of the
hose.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Malfunction
Possible cause
Remedy
2 short warning tones
The sink spigot connection
continuously repeated can is blocked.
be heard.
Clean the sink spigot outlet.
The cycle indicator for the
selected dishwashing cycle
is flashing,
fault code Å20 is dis-
played in the multi-dis-
play. (Problems with water
outflow)
Water drain hose
has not been correctly posi-
tioned.
Check the position of the
hose.
3 short warning tones
continuously repeated can
be heard,
Fault code Å30 is dis-
played in the multi-dis-
play.
First shut off the water tap,
The anti-flood system has then switch off the appli-
been triggered.
ance and contact your local
Service Force Centre.
The mains plug is not
plugged in.
Plug in mains plug.
Replace fuse.
A fuse in the house’s wiring
system is defective.
The cycle is not starting.
For dishwasher models with
a delay start timer:
A start time has been se-
lected.
If the dishes are to be
washed immediately, cancel
the delay start.
The dishwashing compart-
ment is made from rust-
free stainless steel. Rust
spots in the dishwashing
compartment are due to
rust particles from external
sources (rust particles from
water pipes, pans, cutlery,
etc.). Remove such spots
with a commercially-avail-
able cleaning product for
stainless steel.
Rust spots are visible in
the dishwashing compart-
ment.
Only wash cutlery, dishes
and pans that are suitable
for dishwasher use.
Decalcify appliance with
commercially available
agents for cleaning dish-
washers.
If the noises can still be
heard after decalcifying the
machine, use a different
brand of detergent for
washing cutlery and dishes.
A whistling noise can be
heard when washing dish-
es.
The whistling is not a cause
for concern.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
If the Dishwashing Results are not Satisfactory
The dishes are still dirty.
• The wrong dishwashing cycle was selected.
• The dishes were loaded is such a way that the dishwashing water did
not reach all items. The baskets for the dishes must not be overload-
ed.
• The filters in the base of the washing compartment are dirty or incor-
rectly positioned.
• Good quality detergent was not used, or too little was used.
• In the case of scale deposits on the dishes: The dishwasher salt dis-
penser is empty or the water softening system has been incorrectly
set.
• The drain hose is incorrectly positioned.
The dishes do not dry and are not shining.
• Poor quality rinse aid was used.
• The rinse aid dispenser is empty.
There are smears, streaks, milky spots or a shiny bluish coating on
glasses and dishes.
• Lower rinse aid dosage.
There are dried water drops on the glasses and dishes.
• Increase rinse aid dosage.
• The detergent may be the cause. Contact the detergent manufactur-
er's customer advice centre.
Glass corrosion
• Contact the detergent manufacturer's customer advice centre.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal
2 Packaging material
The packaging materials are environmentally friendly and can be recy-
cled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging materials in the appropriate
container at your local waste disposal facilities.
2 Old appliance
Please dispose of your old appliance in line with the guidelines for dis-
posal in your area.
1 Warning! When your appliance has finished its working life, remove
the plug from the socket. Cut off the cable and plug and dispose of
them safely. A cut off plug inserted into a 13 amp socket poses a seri-
ous safety hazard.
Break the door lock so that the door no longer shuts. This prevents chil-
dren from trapping themselves inside and endangering their lives.
Technical Data
Capacity:
12 place settings including serving dishes
Permitted water pres-
sure:
2
1-10 bar (=10-100 N/cm = 0.1-1.0 MPa)
Information on the electrical connection is given on the
rating plate located on the right inner edge of the dish-
washer door.
Electrical connection:
Dishwasher: Free-standing appliances
Dimensions:
Max. weight:
850 x 598 x 598 (H x W x D in mm)
54 kg
5 This appliance conforms with the following EU Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending
Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes for Test Institutes
Testing in accordance with EN 60704 must be carried out with the
appliance fully loaded and using the test cycle (see “Cycle Table”).
Tests in accordance with EN 50242 must be carried out when the salt
dispenser in the water softener and the rinse aid dispenser have been
filled with salt and rinse aid respectively, and using the test cycle (see
“Cycle Table”).
Full load:
Half load:
12 place settings
including serving
dishes
6 place settings including
serving dishes, leaving alter-
nate positions in the rack free
Amount of detergent required: 5g + 25g (Type B)
20g (Type B)
4 (Type III)
Rinse aid setting:
4 (Type III)
Sample loading arrangements:
*)
Upper basket
*) If necessary, move the cup rack from right to left. When doing this, ensure that the
cup rack is at the same height.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
*)
Lower basket with cutlery basket
Cutlery basket
*) If there are cup racks in place on the lefthand side or if beer glass holders are in
place, remove them.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Connection Instructions
1 Safety Information for the Installation
• Only transport the dishwasher in an upright position, otherwise salt
water may run out.
• Before using the dishwasher for the first time, check for any damage
caused in transport. Do not under any circumstances connect an ap-
pliance that is damaged. In the case of damage, please contact your
supplier.
• Never use the dishwasher if the mains cable, water inlet or drain hose
are damaged; or if the control panel, work top or plinth area are
damaged such that the inside of the appliance is freely accessible.
• Always plug the mains plug into a correctly installed shockproof
socket.
• Permanent connection: a permanent connection must only be in-
stalled by a trained electrician.
• Prior to using the appliance for the first time, ensure that the rated
voltage and type of supply on the rating plate match that of the sup-
ply where the appliance is to be installed. The fuse rating is also to be
found on the rating plate.
• Multi-way plugs / connectors and extension cables must not be used.
This could constitute a fire hazard through overheating.
• The dishwasher’s cable must only be replaced by a Service Force Engi-
neer.
• A water inlet hose with safety valve must only be replaced by a Serv-
ice Force Engineer.
• This appliance is heavy.
Care should be taken when moving it.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the Dishwasher
• The dishwasher must be installed on a firm floor and adjusted to en-
sure that it is stable and level in all directions.
• To overcome irregularities in the
floor and to match the height of
the appliance to that of surround-
ing units, extend the threaded feet
using a screwdriver.
• The drain hose, inlet hose and
mains cable must be laid so that
they are able to move freely within
the plinth area, and so that they
are not kinked or crushed when the
dishwasher is in position.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Free-standing appliances
1 If the dishwasher is installed directly next to a cooker, a heat-insulat-
ing, non-flammable panel (laminated with aluminium foil on the side
next to the cooker) must be fitted flush with the top edge of the work
surface (depth 57.5 cm).
If the appliance is built-in under a
kitchen work surface, the worktop
supplied with the dishwasher can be
removed in the following way:
1.Unscrew the screws from the elbows
at the rear (1).
2.Push the appliance’s worktop back-
wards about 1 cm (2).
3.Lift the worktop at the front (3) and
remove it.
1 If the dishwasher is later used as a free-standing appliance, the work
surface supplied with it must be re-mounted.
3 The plinth on free-standing appliances is not adjustable.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Dishwasher
Connecting to the water supply
• The dishwasher must only be connected to a cold water supply.
• The dishwasher must not be connected to open hot water appliances
or instantaneous water heaters.
Permitted water pressure
Lowest permitted water pressure:
1 bar (=10 N/cm2 =100 kPa)
Consult your plumber if the water pres-
sure is less than 1 bar.
If the water pressure is greater than 10
bar, a pressure reduction valve must be
used (available from your dealer).
Highest permitted water pressure:
10 bar (=100 N/cm2 =1 MPa)
Connecting the inlet hose
1 The water inlet hose must not be kinked, crushed or entangled when it
is being connected.
Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet
hose to a tap with an external thread (¾ inch). The inlet hose is fitted
with either a plastic or a metal nut:
– Only tighten the plastic nut hand tight.
– You must tighten the metal nut using a tool.
Then do a visual check for water tightness (make sure that the tap is
not dripping).
3 So that access to the tap in the kitchen is not restricted by the use of
the dishwasher, we recommend installing an additional tap, or fitting a
T-branch to the existing tap.
If you need a longer water inlet hose than that supplied, the following
VDE-approved complete hose sets are to be used. These are available
from your local service centre.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Water drainage
Drain hose
1 The drain hose must not be kinked, crushed or entangled.
Connecting the drain hose:
– Maximum permitted height: 1 metre.
– Minimum required height: 40 cm above the bottom edge of the ap-
pliance.
Extension hoses
• Extension hoses are available from
your local Service Force Centre. To
ensure that the function of the ap-
pliance is not impeded, the internal
diameter of extension hoses must
be 19 mm.
• Extension hoses must not be laid
more than a maximum distance of
3 metres horizontally; the maxi-
mum permitted height for the con-
nection for the drain hose is then
85 cm.
Sink outlet connection
• The outlet of the drain hose (ø 19 mm) fits all commonly available
sink outlet types. The outer diameter of the sink outlet connection
must be at least 15 mm.
• The drain hose must be fixed to the sink outlet connection using the
hose clamp supplied.
Water drainage if the dishwasher is built-in at high level
If the dishwasher is installed at a high level, and the drain hose connec-
tion is less than 30 cm from the lower edge of the appliance, adapter
kit ET 111099520 must be fitted by your local Service Force Centre.
Anti-flood system
For protection from water damage, the dishwasher is equipped with a
anti-flood system.
In the event of a fault, the safety valve in the water inlet hose immedi-
ately interrupts the supply of water to the appliance and the drain
pump is activated. In this way water can neither escape nor overflow.
The remaining water in the appliance is automatically pumped out.
Should a fault occur when the appliance is switched on, a buzzing tone
can also be heard.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical Connection
Any electrical work required to install this appliance should be car-
ried out by a qualified electrician or competent person.
1 WARNING - This appliance must be earthed.
The manufacturer declines any responsibility should these safety
measures not be observed.
Before switching on make sure the electricity supply voltage is the
same as that indicated on the appliance rating plate.
To isolate the dishwasher from the mains, remove the mains plug.
Important: The plug must still be accessible after the appliance has
been installed.
Changing a fuse
The appliance is supplied with a 13amp plug fitted. In the event of hav-
ing to change the fuse in the plug supplied, a 13amp ASTA approved
(BS 1363A) fuse must be used.
Green & Yellow
Should the plug need to be replaced
for any reason, proceed as described
below.
The wires on the mains lead are col-
oured in accordance with the fol-
lowing code.
Blue
Brown
Green and Yellow: Earth
Blue:
Brown:
Neutral
Live
Cord Clamp
• The wire coloured green and yellow must be connected to the termi-
nal marked with the letter “E“ or by the earth symbol
green and yellow.
or coloured
• The wire coloured blue must be connected to the terminal “N“ or col-
oured black.
• The wire coloured brown must be connected to the terminal marked
“L“ or coloured red.
• Upon completion there must be no cut, or stray strands of wire
present and the cord clamp must be secure over the outer sheath.
1 WARNING! A cut off plug inserted into a 13 amp socket is a seri-
ous safety (shock) hazard. Ensure that, if it is necessary to cut off
the plug, it is disposed of safely and not retained.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting systems
The water inlet hose, drain hose and the mains cable must all be con-
nected to the side of the dishwasher as there is no space for them be-
hind the appliance.
2 connection pieces 45° or
straight, outer ø 19 mm,
length 30 mm
double valve
water-
drainage
water
inlet
water-
inlet
mains
cable
water-
drainage
mains socket
mains cable
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Spare Parts
In the event of your appliance requiring service, or if you wish to pur-
chase spare parts, please contact our extended warranty administrators
by telephoning:
0870 01 07887
They will give you details for your local Service Force Centre.
Before calling out an engineer, please ensure you have read the details
under the heading „What to do if...“
When you contact the Service Force Centre you will need to give the
following details:
1. Your name, address and post code
2. Your telephone number
3. Clear and concise details of fault.
4. The model and serial number of the appliance (found on the rating
plate - see picture)
5. The purchase date
Please note that a valid purchase
receipt is required for in-guaran-
tee service calls.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
John Lewis partnership
171 Victoria Street
London SW1E 5NN
Subject to change without notice
822 612 398-00-011204-02
Download from Www.Somanuals.com. All Manuals Search And Download.
|