COMPACT COMPONENT SYSTEM
MX-KC4
Consists of CA-MXKC4 and SP-MXKC4
STANDBY/ON
SLEEP
AUX
FM /AM
FM MODE
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
RHYTHM AX MUTING
REMOTE CONTROL
SP-MXKC4
CA-MXKC4
SP-MXKC4
INSTRUCTIONS
LVT1343-006A
[A]
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
In it you will find all the information you need to set up and use the system.
If you have a query that is not answered by the manual, please contact your dealer.
Features
Here are some of the things that make your System both powerful and simple to use.
❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the
music.
• With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or
CD Player with a single touch.
❏ The great SEA (Sound Effect Amplifier) effects Rock, Pop and Classics are provided.
❏ The RHYTHM AX provides rich sound even at low sound levels.
❏ A 45-station preset capability (30 FM and 15 AM) in addition to auto-seek and manual tuning.
❏ CD changer function can operate 3 discs.
• Discs can be changed during play using the Carrousel tray (rotational tray).
• Continuous, random or program play of 3 discs.
❏ Two Decks enabling tape dubbing.
❏ Timer functions; Daily Timer, REC (Recording) Timer, and Sleep Timer.
❏ You can connect various external units, such as an MD recorder.
❏ The CD Player can play back a CD-R and CD-RW.
How This Manual Is Organized
• Basic information that is the same for many different functions - e.g. setting the volume - is given in the section “Basic Operations”,
and not repeated under each function.
• The names of buttons/controls and display messages are written in all capital letters: e.g. FM/AM, “NO DISC”.
• If the button names on the Unit and the Remote Control are the same, the description on where the button is used will be omitted.
• System functions are written with an initial capital letter only: e.g. Normal Play.
Use the table of contents to look up specific information you require.
We have enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.
IMPORTANT CAUTIONS
Installation of the System
• Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C.)
• Leave sufficient distance between the System and a TV.
1
• Do not use the System in a place subject to vibrations.
Power cord
• Do not handle the power cord with wet hands!
2
• Some power is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the System from the wall outlet, always pull the plug, not the power cord.
Malfunctions, etc.
3
• There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the System.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents..........................................................................................................2
Using the Remote Control....................................................................................................................... 3
Connecting the AM Antenna................................................................................................................... 5
Connecting to the Wall Outlet................................................................................................................. 6
COMPU Play........................................................................................................................................... 6
Basic Operations...........................................................................................................7
Turning the Power On and Off................................................................................................................ 7
Fade-out Muting (FADE MUTING)....................................................................................................... 8
Enjoying the Powerful Sound (RHYTHM AX)...................................................................................... 8
Entering the Number with the Remote Control (Numeric Keys)............................................................ 8
Using the Tuner.............................................................................................................9
Using the CD Player....................................................................................................11
Changing the MP3 Playback Mode....................................................................................................... 12
Using the Cassette Deck (Recording) ......................................................................17
Listening to the External Equipment..................................................................................................... 19
Using the Timers .........................................................................................................20
Setting the Daily Timer ......................................................................................................................... 21
Setting the REC (Recording) Timer ...................................................................................................... 22
Setting the SLEEP Timer ...................................................................................................................... 24
Timer Priority ........................................................................................................................................ 24
Care And Maintenance................................................................................................25
Troubleshooting..........................................................................................................26
Specification................................................................................................................26
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Accessories
Make sure that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
FM Wire Antenna (1)
Remote Control (1)
Batteries (2)
If any of these items are missing, contact your dealer immediately.
How To Put Batteries In the Remote Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6P(SUM-3)/AA(15F)
CAUTION:
• Handle batteries properly.
❏ To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
Remote sensor
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
FM wire antenna (supplied)
Extend the supplied FM Wire
Antenna horizontally.
Strip vinyl shield from cut
line, twist wire core.
Using an FM 75-Ohm Antenna Cable (not Supplied)
If reception is poor, connect the outside antenna.
Outdoor FM antenna cable (not supplied)
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied
FM Wire Antenna.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the AM Antenna
Rear Panel of the Unit
AM antenna wire (not supplied)
If reception is poor, connect the
outside antenna.
Turn the loop until you have
the best reception.
AM loop antenna (Supplied)
Attach the AM loop to its base by
snapping the tabs on the loop
into the slot in the base.
• Even when connecting an outside AM antenna, keep the indoor AM loop connected.
CAUTION:
• To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.
Connecting the Speakers
Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. “Right” / “Left” is labeled
on the rear of the speaker.
1. Open each of the terminals to connect the speaker wire leads.
2. Connect the speaker cords to the Speaker terminals of the Unit.
Connect the gray (+) and gray with black stripe (–) cords of the right side speaker to the red (+) and black (–) terminals marked RIGHT
on the System.
Connect the gray (+) and gray with black stripe (–) cords of the left side speaker to the red (+) and black (–) terminals marked LEFT on
the System.
3. Close each of the terminals.
Right side (rear view)
Left side (rear view)
Gray
Gray
Gray
Gray
with
with
black
stripe
black
stripe
CAUTIONS:
• A TV may display irregular colors if located near the speakers. If this happens, set the speakers away
from the TV.
• Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting External Equipment
Connect a signal cord with stereo mini plugs (not supplied) between the System’s AUX jack on the front panel and the audio output jack
or output terminals of the external portable CD, MD player, STB, etc.
You can then listen to the external source through the System.
Signal cord (not supplied)
White
Lch
Rch
To audio output of
external equipment.
Red
Connecting to the Wall Outlet
Plug the AC power cord into the wall outlet.
Now, your System is at your command!
DEMO Mode
When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops.
To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.
CANCEL/DEMO
(For 2 seconds)
• While the System is turned on, the DEMO display will automatically starts if no operation is made for 2 minutes. To cancel
this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play
button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not
ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
CD Open/Close 0button
On the Remote Control
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
)
STANDBY/ON
STANDBY/ON
SLEEP
Display
Numeric
AUX
RHYTHM AX
indicator
keys
FM /AM
FM MODE
SOUND MODE
VOLUME
RHYTHM AX
STANDBY/ON
CD
CD1
CD2
CD3
PHONES
STANDBY indicator
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
SOUND
MODE
FADE
MUTING
VOLUME +, –
RHYTHM AX
FADE MUTING
RHYTHM
AX
REMOTE CONTROL
Various information
Sound Mode indicator
Level bar
Status bar (Indicates various statuses.)
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
Turning the Power On and Off
Turning the System On
Adjusting the Volume
Press the
STANDBY/ON button.
1
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
STANDBY/ON
or
The display comes on and “POWER ON” is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
You can set the volume level to MIN, 1-31, or MAX.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
• When you turn the power off at a volume level of over 19,
the volume level is automatically set to 18 when the power
is turned back on.
Turning the System Off
Press the
STANDBY/ON button again.
CAUTION:
1
STANDBY/ON
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
or
“GOOD BYE” is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Fade-out Muting (FADE MUTING)
Entering the Number with the
Remote Control (Numeric Keys)
You can mute the output with one touch operation.
You will use the number keys on the Remote Control to enter num-
bers for presetting stations, recalling the preset stations, or pro-
gramming the playing tracks on CDs.
To muting the output, press the FADE MUTING button on the
Remote Control. The output is faded out.
To release muting, press the FADE MUTING button once
again. The output is faded in to the previous level.
How to enter the number with the number keys is explained here.
Examples:
• To enter number 5, press 5.
• To enter number 15, press +10, then 5.
• To enter number 20, press +10, then 10.
• To enter number 25, press +10, +10, then 5.
• After Fade-out Muting, turning the VOLUME control on the
unit or pressing the VOLUME button on the Remote Control
will increase the volume from the previous level.
Enjoying the Powerful Sound
(RHYTHM AX)
Using RHYTHM AX, harder-hitting beats intensify your listening
experience even at low sound levels.
RHYTHM AX also works even when the song has no “beat,” such
as classical music, so that you can listen to the rich sound even at
low sound levels.
This function only affects the playback sound, not your recording.
Press down the RHYTHM AX control.
“RHYTHM AX” appears and the display return to
the Music Source Selecting mode.
• Each time you press down the control, RHYTHM
AX turns on and off alternately.
• The RHYTHM AX lamp also lights up.
When using the remote control, press RHYTHM AX.
• Each time you press the button, RHYTHM AX turns on and off
alternately.
• Each time you turn the RHYTHM AX on or off, you will hear
a gap in the playback.
Selecting the Sound Mode
(SOUND MODE)
You can select one of 3 SEA (Sound Effect Amplifier) modes.
You can use this effect only for playback.
To get the effect, press the SOUND MODE button until Sound
Mode you want appears on the display.
The “SOUND MODE” indicator lights up in the display.
Each time you press the button, the Sound Mode changes as fol-
lows:
ROCK
=
POP
=
CLASSIC
=
FLAT
=
(back to the beginning)
To cancel the effect, press the SOUND MODE button until
“FLAT” appears on the display.
The “SOUND MODE” indicator goes off.
ROCK
Boosts low and high frequencies. Good for
acoustic music.
POP
CLASSIC
Good for vocal music.
Set for wide and dynamic sound stereo
systems.
FLAT
No sound effect applies.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
STANDBY/ON
SLEEP
Numeric
AUX
keys
FM /AM
FM MODE
FM/AM
SET
FM MODE
FM/AM
1
Á
7
CD
CD1
CD2
CD3
1
Á
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Band display, Frequency display, Preset channel
FM mode indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
• Manual Tuning
Briefly press the 22or
Á
button to move from frequency
to frequency until you find the station you want.
❏ Before listening to the radio:
OR
• Auto Tuning
• Make sure that both the FM and AM antennas are correctly
connected. (See pages 4 and 5.)
If you hold down the 22 or Á button for 1 second or
more and then release it, the frequency changes down, or up,
automatically until a station is found.
OR
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset number you want, using the 4 or ¢
button.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.
Tuning In a Station
Example:
Press the ¢ button until the preset number “P12” appears
on the display. Then, the display will show the preset
number’s band and frequency.
Press the FM/AM button.
1
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
FM /AM
or
Preset tuning using the Remote Control:
Enter the preset number you want to recall using the numer-
ic keys. See “Entering the Number with the Remote Con-
trol” on page 8.
on the Unit on the Remote Control
Select a station using one of the following
2
Example:
methods.
Press +10, then 2 to recall the preset number 12. Then, the
display will show the preset number’s band and frequency.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
CAUTION:
• Even if the System is unplugged or if the power
failure occurs, the preset stations will be stored
for a few days. However, in case the preset sta-
tions are erased, you will need to preset the sta-
tions again.
• In AM broadcast, reception sensitivity will be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
Presetting Stations
To Change the FM Reception
Mode
You can preset up to 30 FM stations and up to 15 AM stations.
When you are tuned in to an FM stereo broadcast, the “ST (Ster-
eo)” indicator lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but you lose stereo effect.
• Preset numbers may have been set to factory test fre-
quencies prior to shipment. This is not a malfunction. You
can preset the stations you want into memory by following
one of the presetting methods below.
• During presetting stations, if no button operation is made
for 5 seconds, the display returns to the band/frequency
display. In this case, repeat steps from the beginning.
Press the FM MODE button on the Remote Control so
that the “MONO” indicator lights up on the display.
FM MODE
ST
MONO
To restore the stereo effect, press the FM MODE button on
the Remote Control so that the “MONO” indicator goes off.
Selecting other station will also cancel the FM Mono mode and re-
store the stereo effect.
TUNING
or
SET
PRESET
or
SET
FM=30, AM=15
When changing the Band
Using the Unit
Select a band by pressing the FM/AM button.
1
2
Press the
tion.
or
button to tune in a sta-
22 Á
Press the SET button.
3
4
“SET” will blink for 5 seconds.
4
or
¢
While “SET” is blinking, press the
button to select the preset number.
¢: Increases the preset number by 1.
4: Decreases the preset number by 1.
Press the SET button.
5
6
“STORED” appears and, after 2 seconds, the display returns to
the band/frequency display.
Repeat above steps 2 to 5 for each station
you want to store in memory with a preset
number.
To change the preset stations, repeat the same steps as
above.
• In step 4, you can select the preset number using the nu-
meric keys on the Remote Control. See “Entering the
Number with the Remote Control” on page 8.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
REPEAT
PROGRAM
STANDBY/ON
RANDOM
CD Open/
Close 0
Numeric
SLEEP
keys
AUX
DISC SKIP
CD 6
FM /AM
FM MODE
SET
4
¢
CANCEL
CD1-CD3
7
CD1-CD3
CD
CD1
CD2
CD3
CD 6
1
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
Á
7
REPEAT
PROGRAM
/RANDOM
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Program indicator
Track number, Playing time, Program number, etc.
MP3 indicator
Disc indicators
Random Repeat
indicator indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
This unit has been designed to playback the following CDs:
• Audio CD
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
More about MP3 discs
• MP3 disc (MP3 files recorded on a CD-R or CD-RW)*
• MP3 discs (either CD-R or CD-RW) require a longer read-
out time. (It varies due to the complexity of the recording
configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This unit does not support multisession recording.
• This unit can play MP3 files only with the following file ex-
tensions— “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• Non-MP3 files are ignored. If non-MP3 files are recorded
together with MP3 files, this unit will take a longer time to
scan the disc. It may also cause the unit to malfunction.
• Some MP3 discs may not be played back because of
their disc characteristics or recorded conditions.
Only CDs bearing these marks can be
used with this System. However, con-
tinued use of irregular shape CDs
(heart-shape, octagonal, etc.) can dam-
age the System.
Recordable
ReWritable
When playing a CD-R or CD-RW
• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWri-
table) can be played back when they are already “finalized.”
• Before playing back CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time since the reflect-
ance of CD-RWs is lower than for regular CDs.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be recom-
mended.
*For MP3 discs
• This unit manages files and folders on MP3 discs as “tracks”
and “albums.”
• Playback order of the MP3 files (tracks) recorded on a disc are
determined by the writing (or encoding) application; therefore,
playback order may be different from the one you have
intended while recording the files and the folders.
• This unit shows the file (track) names and ID3v2 tags (only
“Title”, “Artist” and “Album”) on the display after starts play;
however, there is a limitation on available characters and some
file names and ID3 tags are not shown correctly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
❏ When you use an 8 cm CD, place it on the inner circle of the tray.
About Disc Indicator:
❏ You can load CDs while listening to the other source or while
listening to the CD being played back.
Disc Rotation
indicator
Disc Number
indicator
❏ When power is turned off with the tray opened, the tray is auto-
matically closed.
Selected Disc
indicator
❏ If the CD cannot be read correctly (because it is scratched, for
example), “ NO DISC” appears on the display.
The Disc indicator consists of the following three kinds of indica-
tors:
To Unload CDs
Disc Number indicator: Lights all the time.
Selected Disc indicator:Lights for the currently selected
disc number.
Disc Rotation indicator:Runs when the selected CD is
playing or paused. This indicator
Take out the CD as shown below.
While the CD Player is stopped, press the CD
1
0
Open/Close
tray.
button on the Unit to open the
goes out if a CD is not loaded for
the selected disc number.
Remove the CD, then press the DISC SKIP
button on the Unit.
The tray turns for the next CD.
2
One Touch Play
The power comes on, and operations are done automatically.
Repeat step 2 to remove all the CDs.
3
4
❏ By pressing the CD 6button, the System will come on, and if
a CD is loaded for the disc number that was lastly selected, it
will start playing from the first track.
0
Press the CD Open/Close
Unit to close the tray.
button on the
❏ By pressing the CD1-CD3 button, the System will come on, and
if a CD is already loaded for the selected disc number, it will
start play from the first track.
❏ You can remove CDs while listening to the other source.
Tips:
• Removing/changing the CDs during playback
While playing back a CD (e.g. CD1), you can remove or change
the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close
0 button. After removing or changing, press the same button to
close the tray.
To Load CDs
0
Press the CD Open/Close
Unit to open the tray.
button on the
1
2
Changing the MP3 Playback Mode
Place one or two CDs, with its label side up,
onto the tray.
Be sure that the CD is securely seated inside the recess on the
disc tray.
When playing an MP3 disc, you can choose the playback mode of
the MP3 disc as follows:
TRACK mode:
The unit recognizes only tracks (files). You can play an MP3 disc
like an Audio CD.
With the label side up
GROUP mode:
The unit recognizes tracks (files) and albums (folders) on an MP3
disc. You can play an MP3 disc according to the way how they are
grouped.
On the remote control ONLY:
Press MP3 before or during playing an MP3 disc.
GROUP indicator appears when the MP3
playback mode is the GROUP mode.
Press the DISC SKIP button on the Unit and
place the next CD.
When you press the button, the tray turns for the next CD.
3
4
• Each time you press the button, the MP3 playback mode
changes between “GROUP” and “TRACK” alternately.
0
Press the CD Open/Close
Unit.
The tray is closed.
button on the
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
GROUP mode
Basics of Using the CD Player-
Normal Play
Total track number
To Play CDs
Total group number
To pause, press the CD 6button. The playing time indication
blinks on the display.
Load CDs.
1
2
To cancel pause, press the CD 6button again. Play continues
Press one of the Disc button (CD1-CD3) you
want to play.
The selected disc number (e.g. “CD DISC 1”) appears on the
display.
The first track of the selected CD begins playing. When the
first CD finishes playing, the next and the third CDs are con-
tinuously played back.
When the last CD has finished playing, the CD Player auto-
matically stops.
from the point where it was paused.
Tips:
• Playing back the CD using the DISC SKIP button
You can also play the CDs using the DISC SKIP button. During
playback, each time you press the button, the next CD is automat-
ically played back. If the next disc tray is empty, the disc tray is
automatically skipped.
To Select a Track
❏ You can start to play the currently selected disc by simply press-
ing the CD 6button.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the track you want to
play, except for MP3 group mode.
By pressing the button, you can skip to the next track or skip back
to the previous track.
While playing the CD, the following will appear on the display.
For Audio CD
• The selected track starts playing.
CD is
playing
• Press the ¢ button once to skip to the beginning of the next
track.
Track number Elapsed playing time
• Press the 4 button to skip to the beginning of the current
track. Press twice quickly to skip to the beginning of the previ-
ous track.
For MP3 disc
TRACK mode
In Stop mode (using the 4or ¢button):
By briefly pressing the 4or ¢button, the CD Player operates
in the same way as during playback, except for MP3 group mode.
Track number
Using the numeric keys on the Remote Control:
Using the numeric keys, you can directly select the track on the
currently selected CD.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
• The selected track starts playing.
For example, press +10, then 5 to play back the track number 15.
See “Entering the Number with the Remote Control” on page 8.
In MP3 group mode:
GROUP mode
The selected track of the current group starts playing.
Tips:
• For MP3 discs
Track number of the current group
When the selected track starts playing, information of that track
scrolls on the display, in the order of file name, title, artist, and al-
bum.
In the STOP mode, the file name (TRACK mode), the group name
and the file name (GROUP mode) scroll on the display.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
When the Disc button (CD1-CD3) is pressed with the tray opened,
the tray is closed and the selected CD automatically begins play-
ing.
To Select a Group (For MP3 GROUP mode only)
To stop playing the CD, press the 7button. The following in-
formation for the CD is displayed.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play.
For Audio CD
• The first track of the selected group starts playing.
In Stop mode (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play. The group number, the group name and the file name scroll
on the display.
Total playing time
Total track number
For MP3 disc
TRACK mode
Search Play
Holding down the following buttons, during playback, will fast
forward/backwards the CD so you can quickly find a particular
passage in the track you are listening to.
Total track number
• 22or Ábutton on the Unit
• 4or ¢button on the Remote Control
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Using the Remote Control
Press the numeric keys to directly enter the track number. Then,
the program order number will be assigned from P-1.
• To delete the current program step, press the CANCEL button
on the Unit.
Programming the Playing Order
of the Tracks
You can program the playing order of the tracks on all the CDs. Note
that you can only make a program when the CD Player is stopped.
Repeat steps 3 and 4 to program other tracks
on the same CD or the other CD.
5
❏ You can program up to 32 tracks in any desired order including
the same tracks.
6
To play the program, Press the CD
ton.
but-
6
For details, see “To Play the Program You Have Made” men-
tioned below.
For MP3 discs
• If you try to select a MP3 disc that has once been read or
played, “MP3 DISC” appears on the display and it can not
be programmed.
• MP3 disc that has not ever been read can be selected in
a program mode. But when playback starts, “MP3 DISC”
appears on the display, the program is deleted and
switched to a next program.
To confirm the programmed contents, while the CD player
is stopped, select Program mode by pressing the PROGRAM but-
ton and press the 4or ¢button on the Remote Control.
To delete all the tracks in the program, while the CD Player
is stopped, press the 7button or open the tray by pressing the CD
Open/Close 0button.
To Modify the Program, while the CD Player is stopped and the
program mode is selected, press the CANCEL button, the last track
in the program is deleted. To add new tracks to the end of the pro-
gram, repeat above steps 3 and 4.
To Make a Program
Load CDs.
1
In Stop mode, set the CD Player in Program
2
Play mode.
• If you try to program a track number that does not exists
on the CD, your entry will be ignored.
• If you try to program the 33rd track, “FULL” appears on
the display.
On the Unit
Press the PROGRAM button to light the “PRGM” indicator on the
display.
At the same time, “PROGRAM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until “PROGRAM” ap-
pears on the display.
The “PRGM” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If a program is already made, the last step of the program will
be displayed.
To Play the Program You Have Made
Press the CD 6button.
The System plays the tracks in the order you have programmed
them.
• To use Repeat Play for Program Play, press the REPEAT but-
ton to select “REPEAT” before starting playback. For details,
see “Repeating Tracks” on page 15.
❏ You can skip to a particular program track by pressing the 4
or ¢button during Program Play.
Press one of the Disc button (CD1-CD3) to
select the CD you want to program.
The display will change to the Program Entry display.
3
❏ To stop playing, press the 7button once. If you press the 7but-
ton, while the CD Player is stopped, the program is deleted.
CD1
To Exit and Re-enter Program Play
or
The program you have made is stored in memory. So, you can exit
Program Play temporarily or re-enter Program Play unless you de-
lete the program.
To exit the program mode once, press the 7 button to stop
playing. The “PROG” indicator goes off and the Program mode
will be canceled. The program is stored in the memory.
To re-enter Program Play mode, press the PROGRAM or
PROGRAM/RANDOM button until the “PRGM” indicator lights
up again.
Disc number Track number
Select the track you want to program.
4
Using the Unit
While the display is blinking, press the
Unit to select the track, then press the SET button within 5 seconds.
The program order number will be assigned from P-1.
4
or
¢
button on the
• When the power is turned off (standby mode), the pro-
grammed tracks are deleted.
• Tray will not open during the program playback.
Disc number Track number
Program order number
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Random Play
Tray Lock Function
The tracks of the selected CD will play in no special order when
you use this mode.
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close 0button on the Unit is pressed.
In Stop mode, set the CD Player in Random
1
Play mode.
On the Unit
Locking the Tray
Press the RANDOM button to light the “RNDM” and “1 DISC”
indicator.
At the same time, “RANDOM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the “RANDOM”
appears on the display.
Turn on the System and enter CD mode.
1
2
While pressing down the 7button, press the
0
CD Open/Close
button on the Unit.
“LOCKED” appears on the display.
The “RNDM” and “1 DISC” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If you try to open the tray by pressing the CD Open/Close 0
button, “LOCKED” appears on the display to let you know that
the tray has been locked.
6
Press the CD
button.
2
The tracks on all the CDs are played in random order.
To stop playing, press the 7button. The Random mode is can-
celed and the “RNDM” and “1 DISC” indicator goes off.
To skip a track during playback, press the ¢ button to
jump to the next track in the random sequence.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Now, you can use the tray normally.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
REPEAT ALL=REPEAT 1DISC=REPEAT 1=Blank display
=(back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
REPEAT 1DISC:Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1:
Repeats one track.
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEATïBlank display
It repeats all the tracks in the program.
To stop playing, press the 7button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the Repeat indicator goes off.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Listening to a Tape)
STANDBY/ON
SLEEP
TAPE A 3
AUX
TAPE B 3
FM /AM
7
4
¢
FM MODE
CD
CD1
CD2
CD3
22
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
TAPE B 3
TAPE A 3
A
TAPE
B
(Deck B)
(Deck A)
Á
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play, record, and dub audio tapes.
Close the cassette holder gently.
3
4
❏ Listening to type I tape is suitable for this Cassette Deck.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
3
3
Press the TAPE A
or TAPE B
button.
The selected Deck appears (for example, TAPE-A) and the
Deck indicator “A” or “B” lights up on the display.
The Tape indicator (3) blinks on the display and the tape is
played back.
One Touch Play
The Cassette Deck automatically stops when one side of the
tape has finished playing.
By pressing the TAPE A
3
or TAPE B
3
button, the System will
come on, and if a tape is in the deck, it will start to play. If no tape
is loaded, “NO TAPE” appears on the display, the System will
come on and wait for you to insert a tape, or select another function.
To stop playing, press the 7button.
To remove the tape, stop the tape, and press the 0 PUSH
OPEN part to open the Cassette Holder.
To Fast-Wind a Tape
Playing a Tape
During playback or in Stop mode, press the Á(FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the ¢button on the Remote Control.)
During playback or in Stop mode, press the 22(REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the 4button on the Remote Con-
trol.)
You can use either Deck A or Deck B at a time for playback.
0
Press the
you want to use.
PUSH OPEN part for the deck
1
2
When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
During fast-winding the tape, the Tape indicator (3) goes out.
During fast-winding, the status bar illumination at the bottom of
the display moves counterclockwise.
During rewinding, it moves clockwise.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
down, toward the base of the Unit.
The tape will travel from the left to right.
❏ During fast-winding the tape, you can change the tape travelling
direction by pressing the Á(FF) or 22(REW) button.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the 0PUSH OPEN part again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
STANDBY/ON
REC START/STOP
SLEEP
CD REC START
AUX
PROGRAM
DUBBING
FM /AM
FM MODE
7
TAPE B 3
TAPE A 3
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
A
TAPE
B
(Deck A)
(Deck B)
TAPE A 3
TAPE B 3
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
REC indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Recording onto a cassette from any of the sound sources is simple.
Just place a tape in Deck B, have the source ready, make one or
two settings, and you’re ready to record. For each source, the pro-
cedure is a little bit different so we explain each separately. But
first, here are a few things to make your recordings better.
• At the start and end of cassette tapes, there is leader tape
which cannot be recorded onto. Thus, when recording
CDs, radio broadcasts, etc., wind on the leader tape first
to ensure getting the beginning of the recording.
Things To Know Before You Start Recording
❏ It may be unlawful to record or playback copyright ma-
terial without the consent of the copyright owner.
CAUTION:
❏ The recording level, which is the volume at which the new tape
is being made, is automatically set correctly, so it is not affected
by the VOLUME Control on the System. Also, it is not affected
by adjusting the sound effects. Thus, during recording, you can
adjust the sound you are actually listening to without affecting
the recording level.
• If a recording you make has excessive noise or
static, the Unit may have been too close to a TV
which was on during the recording. Either turn
off the TV or increase the distance between the
TV and the Unit.
❏ Two small tabs on the back of the cassette tape, one for side A
and one for side B, can be removed to prevent accidental erasure
or recording.
Adhesive tape
❏ To record on a cassette with the tabs removed, you must cover
the holes with adhesive tape first.
❏ Type I tape can be used for recording.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
Press the CD REC START button on the Unit.
“CD REC” appears on the display and the “REC” indicator
lights up. Then, the System begins CD Synchro Recording and
the tracks on the CD are recorded on the tape.
When recording of the tracks of all CDs is finished, the CD
Player and Cassette Deck stop.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
• After the CD Player has played the entire CD or all the pro-
grammed tracks, the tape automatically stops.
2
3
Standard Recording
This is the basic method for recording any source. The System also
has special ways for recording CD to tape, and tape to tape, which
save you time and effort, as well as give you some special effects.
However, when you need to add a selection to a tape you have
made, or are combining selections from several sources on one
tape, use the method described below; just substitute the source
you want into this procedure, such as a tape in Deck A, a CD, or
the Tuner. You can also record from an external equipment with
this procedure.
To Record Any Sound Source to Tape
Follow these steps to record from any sound source onto a tape in
Deck B.
To stop at any time during the recording process, press
the 7button. The CD Player and Cassette Deck stop.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
• When making SLEEP timer settings while doing CD Syn-
chro recording, set enough time to allow for the CD to fin-
ish playing, otherwise the power will go off before
recording is completed.
Tape to Tape Recording (DUB-
BING)
Tape travelling direction
Prepare the source, by, for example, tuning
in a radio station, loading CDs, or turning on
connected equipment.
• For CD recording, see “CD Synchro Recording” mentioned
below.
2
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
Press the TAPE A 3 button, and then press
the 7button.
Insert the source cassette you want to copy
from into Deck A for playback.
1
2
3
4
• For dubbing, see “Tape to Tape Recording (DUBBING)”
described below.
Press the REC START/STOP button on the
3
Unit.
Insert a blank or erasable cassette you want
to copy onto into Deck B for recording.
The “REC” indicator lights up and the System begins record-
ing.
The Tape indicator (3) blinks on the display.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
Press the DUBBING button on the Unit.
Deck A and Deck B will start simultaneously and the “REC”
indicator lights up.
During dubbing, the Deck indicators “A” and “B” light up al-
ternately.
To stop during recording, press the REC START/STOP but-
ton on the Unit, or press the 7button.
• If no tape is inserted into Deck A, “NO TAPE” will appear
on the display.
• If no tape is inserted into Deck B, “NO TAPE” will appear
on the display.
Recording an AM Station to Tape (Beat Cut)
When recording an AM broadcast, beats may be produced which are
not heard when listening to the broadcast. If this happens, press the
FM MODE button on the Remote Control to eliminate the beats.
To stop dubbing, press the REC START/STOP button on the
Unit or the 7button.
Set to AM station and start recording.
1
2
Press the FM MODE button on the Remote
Control to eliminate the beats.
Each time you press the button, the display changes as shown
below:
• During dubbing, you can hear sound effects through the
speakers or headphones. However, the sound is dubbed
without sound effects.
BEAT 1 ïBEAT 2
CD Synchro Recording
Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have set in a program.
Prepare CDs. (See page 12.)
1
Press the CD1-3 button (that you want to make recording), and
then press the 7button.
• If you want to record specific tracks only, you need to pro-
gram the tracks beforehand. (See page 14.)
• If you want to record one CD only, you need to load one
CD only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an External Equipment
STANDBY/ON
SLEEP
AUX
AUX
FM /AM
FM MODE
AUX
CD
CD1
CD2
CD3
AUX jack
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Listening to the External
Equipment
You can listen to the external equipment such as portable CD, MD
player, STB, or other auxiliary.
❏ First, make sure that the external equipment is properly connect-
ed to the System. (See page 6.)
Set the volume level to the minimum posi-
tion.
1
Press the AUX button.
“AUX IN” appears on the display.
2
Start playing the external equipment.
3
4
Adjust the volume level to the level you want
listen to.
Apply the following sound effects, if you
5
wish.
• RHYTHM AX (See page 8.)
• Sound Mode (See page 8.)
• For operation of the external equipment, refer to its In-
structions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
STANDBY/ON
SLEEP
SLEEP
AUX
FM /AM
FM MODE
CLOCK/TIMER
SET
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
¢
4
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
DAILY Timer indicator
SLEEP indicator
REC (Recording) Timer indicator
Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Three types of timers are available:
DAILY Timer
Fixing the Clock
Use this timer to set wake up everyday to music from any
source, instead of an alarm clock.
Using the Unit
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the
starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automatically after
a certain length of time.
Press the
on the System.
STANDBY/ON button to turn
1
Press the CLOCK/TIMER button repeatedly
until clock setting display (time indication)
2
appears on the display.
Setting the Clock
Each time you press the button, display changes as follows:
DAILY
=
ON TIME
=
REC
=
ON TIME
=
Clock Setting
When you plug the AC power cord into the wall outlet, the time in-
dication “0:00” blinks on the display.
display (time indicator)
=
Canceled
=
(back to the beginning)
You can set the clock whether the System is on or off.
Press the SET button.
3
4
The hour digits of the current clock blink on the display.
Using the Unit
Follow steps 2 to 5 of “Setting the Clock” men-
tioned above.
Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
1
4 ¢
Press the
or
button to set the hour.
2
Pressing the ¢button moves the time forwards and pressing
the 4button moves it backwards. Holding down the button
moves the hour rapidly.
• The clock must be correctly set for the timers to work.
• Each setting step must be completed within approx. 30
seconds. Otherwise, the setting is cleared and must be
repeated from the beginning.
• The clock may gain or lose one to two minutes per month.
• If there is a power failure, the clock loses its setting
immediately. “0:00” blinks on the display and the
clock must be reset.
Press the SET button.
The minute digits of the time indication blink on the display.
• To return to the hour setting, press the CANCEL button.
3
4 ¢
Press the
or
button to set the minute.
4
5
Press the SET button.
“CLOCK OK” appears on the display. Then, the selected time
is set and the seconds start counting from 0.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
2. Press the ¢or 4button to set the minute, then press the
SET button.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at
the same time every day.
The Timer indicator ( ) and “DAILY” indicator on the display
shows that the Daily Timer you have set is in effect.
You can set the Daily Timer whether the System is turned on or
off.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
• You can set the Daily Timer whether the System is on or off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
Setting the OFF time (Example: 13:15).
1. Press the ¢ or 4 button to set the hour you want the
System to be turned off, then press the SET button.
The minute digits of the OFF time blink on the display.
3
Using the Unit
Press the CLOCK/TIMER button until “ON
TIME” immediately after “DAILY” appears on
1
the display.
At this time, “DAILY” indicator blinks and the Timer indica-
tor ( ) lights up on the display.
Each time you press the button, the display changes as follows:
DAILY =ON TIME* =REC =ON TIME =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the Daily Timer setting.
2. Press the ¢or 4button to set the minute, then press the
SET button.
Then, the System enters ON-time setting mode, and the current
ON time appears on the display and the hour digits blink.
The System enters Music Source Selecting mode and
“TUNER FM” appears on the display.
Selecting the music source.
4
Press the ¢ or 4 button to select the music source you
want to listen to, then press the SET button.
Each time you press the ¢or 4button, the display chang-
es as shown below:
Setting the ON time (Example: 10:15).
1. Press the ¢ or 4 button to set the hour you want the
System to come on, then press the SET button.
2
TUNER FM =TUNER AM = CD =TAPE =AUX
The minute digits of the ON time blink on the display.
Pressing the ¢button moves the time forwards and press-
ing the 4button moves it backwards.
IN =(back to the beginning)
According to the music source you have selected, the next op-
eration differs.
Holding down the button moves the time rapidly.
TUNER FM: Tunes in to the specified preset FM station.
TUNER AM: Tunes in to the specified preset AM station.
CD:
Plays the specified track on the specified CD.
TAPE:
AUX IN:
Plays a tape in Deck A.
Plays an external source.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the ¢ or 4 button to select the preset station
number, then press the SET button.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until the “DAILY” appears on the
display.
1
When selecting CD :
Press the ¢ or 4 button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as fol-
lows:
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“DAILY” indicator go out.
2
DISC – =DISC 1 =DISC 2 =DISC 3 =(back to the be-
ginning)
• If no disc number is specified, playback will start from the
first track of the currently selected disc.
When selecting TAPE:
To activate the cancelled Daily Timer:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
Press the CLOCK/TIMER button on the Unit
1
repeatedly until the “DAILY” appears on the
display.
To allow this, the equipment should have the timer function.
The “DAILY” indicator blinks and the Timer indicator (
lights up on the dispaly.
)
Setting the volume level.
Press the ¢or 4button to select the volume level.
VOL – – : When the volume level is under 18: The current vol-
ume level will be used.
When the volume level is over 19: The volume level is auto-
matically set to 18.
5
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “DAILY” indicator remain lit, and the display returns to
the original display.
2
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
Press the SET button.
6
7
Setting the REC (Recording)
Timer
The timer setting is completed and the display returns to the
display before you set the Timer.
Press the
STANDBY/ON button to turn
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
off the System, if necessary.
The Timer indicator ( ) and “DAILY” indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
• You can set the REC Timer whether the System is on or
off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) blinks and “DAILY” indicator lights during
timer operation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator ( ) and “DAILY” indica-
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Using the Unit
Press the
STANDBY/ON button to turn
8
You can set the time in the same way as for setting the Daily Tim-
er.
off the System, if necessary.
The Timer indicator ( ) and “REC” indicator are lit on the
display, showing that the Rec Timer is set to on.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
Press the CLOCK/TIMER button until “ON
TIME” immediately after “REC” appears on
2
When the timer ON-time comes:
• When the timer ON-time comes, the System automatically
turns on. The station you have set is played. The Timer indica-
tor ( ) blinks during timer operation.
To stop timer recording, press the 7button.
• When the timer OFF-time comes, the System automatically turns
off.
the display.
The Timer indicator ( ) lights and the “REC” indicator
blinks.
Each time you press the button, the display changes as follows:
DAILY =ON TIME =REC =ON TIME* =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the REC Timer setting.
Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits blink.
• If the System is already on when the timer ON-time
comes, the REC Timer does not work.
Turning the REC (Recording) Timer On and Off
Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.
To cancel the REC Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
1
Setting the ON time you want the System to
3
turn on.
1. Press the 4or ¢button to set the hour, then press the
SET button.
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“REC” indicator go out.
2
2. Press the 4or ¢button to set the minute, then press the
SET button.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
To activate the cancelled REC Timer:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
1
Setting the OFF time you want the System to
4
turn off.
play.
1. Press the 4or ¢button to set the hour, then press the
The Timer indicator ( ) lights and the “REC” indicator
blinks on the display.
SET button.
2. Press the 4or ¢button to set the minute, then press the
SET button.
The System enters Preset Station Entering mode.
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “REC” indicator remain lit, and the display returns to the
original display.
2
Select the preset station for recording.
5
1. Press the 4or ¢button to set the band (TUNER FM or
TUNER AM), then press the SET button.
2. Press the 4or ¢button to set the preset number, then
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
press the SET button.
Setting the volume level.
6
Press the ¢or 4button to select the volume level.
VOL – – : The current volume level will be used.
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
Press the SET button.
The timer setting is completed and the display returns to the
display before you set the Timer.
7
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Setting the SLEEP Timer
Timer Priority
Use the Sleep Timer to turn the System off after a certain number
of minutes when it is playing. By setting the Sleep Timer, you can
fall asleep to music and know that your System will turn off by it-
self rather than play all night.
Since REC Timer and DAILY Timer can be set independently, you
may wonder what happens if the settings overlap. Here are the pri-
orities for REC Timer and DAILY Timer:
• Timer with the earlier time setting will have the priority.
Timer will not operate when other Timer is operating.
• If other Timer is set to an exact same time as the REC Timer,
the REC Timer will have the priority.
• You can only set the Sleep Timer when the System is on.
Using the Remote Control
During playback a source, press the SLEEP
1
❏ REC Timer and DAILY Timer will not operate when SLEEP
Timer is operating.
button.
The “SLEEP” indicator starts blinking on the display.
Example
Setting
Set the length of time you want the source to
play before shutting off.
Each time you press the SLEEP button, the time length chang-
es as follows:
2
ON
OFF
REC Timer
ON
OFF
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
DAILY Timer
beginning)
21:30
ON
22:00
22:30
OFF
23:00
Operation
Wait for 5 seconds.
The “SLEEP” indicator stops blinking and remains lit, and the
display returns to the original one before setting the Sleep
Timer.
3
REC Timer
The System is now set to turn off after the number of minutes
you have set.
DAILY Timer
To Confirm the Sleep Time:
21:30
22:30
When the SLEEP button on the Remote Control is pressed, the re-
maining sleep time is displayed. Wait until the display returns to
the original display.
Operates only in REC Timer mode.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button on the Remote Control until the “SLEEP”
indicator goes out on the display.
• Turning off the System also cancels the SLEEP Timer.
• When the REC Timer or the DAILY Timer is operating,
SLEEP Timer can not be set.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Care And Maintenance
Handle your CDs and tapes carefully, and they will last a long
time.
Cassette Tapes
• If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of
the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
Compact Discs
• Remove the CD from its case by holding
it at the edges while pressing the case’s
center hole lightly.
• Do not touch the shiny surface of the
CD, or bend the CD.
• Do not touch the tape surface.
• Put the CD back in its case after use to
prevent warping.
• Be careful not to scratch the surface of
the CD when placing it back in the case.
• Avoid exposure to direct sunlight, tem-
perature extremes, and moisture.
• Do not store the tape:
- In dusty places
- In direct sunlight or heat
- In moist areas
- On a TV or speaker
- Near a magnet
• A dirty CD may not play correctly. If a
CD does become dirty, wipe it with a
soft cloth in a straight line from center to
edge.
Cassette Deck
• If the heads, capstans, and pinch-rollers of the Cassette Deck
become dirty, the following will occur:
- Loss of sound quality
- Discontinuous sound
- Fading
- Incomplete erasure
- Difficulty recording
CAUTION:
• Do not use any solvent (for example, conven-
tional record cleaner, spray thinner, benzine,
etc.) to clean a CD.
• Clean the heads, capstans, and pinch-rollers using a cotton
swab moistened with alcohol.
General Notes
In general, you will have the best performance by keeping your
CDs and the mechanism clean.
Pinch-roller
Capstan
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the System’s Top Cover closed when not in use.
Moisture Condensation
Moisture may condense on the lens inside the System in the
following cases:
• After turning on heating in the room.
• In a damp room.
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
Heads
• If the heads become magnetized, the Unit will produce noise or
lose high frequencies.
• To demagnetize the heads, turn off the Unit, and use a head
demagnetizer (available at electronics and record shops).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as
your dealer, for service.
Symptom
Possible Cause
Action
No sound is heard.
•
•
Connections are incorrect, or loose.
Headphones are connected.
•
•
Check all connections and make corrections.
(See pages 4 to 6.)
Disconnect the headphones.
Poor radio reception
•
•
The antenna is disconnected.
The AM Loop Antenna is too close to the Sys-
tem.
The FM Wire Antenna is not properly
extended and positioned.
•
•
Reconnect the antenna securely.
Change the position and direction of the AM
Loop Antenna.
Extend FM Wire Antenna to the best reception
position.
•
•
The disc tray does not open.
•
•
The AC power cord is not plugged in.
Tray is locked.
•
•
Plug the AC power cord.
Unlock the tray. (See page 15.)
The CD skips.
The CD is dirty or scratched.
The CD is upside down.
Clean or replace the CD. (See page 25.)
Put the CD in with the label side up.
Replace the disc.
The CD does not play.
The MP3 disc does not play.
•
•
No MP3 files are recorded on the disc.
MP3 files do not have the file extension —
.MP3, .Mp3, .mP3, or .mp3 in thier file names.
MP3 files are not recorded in the format com-
pliant with ISO 9660 Level 1 or Level 2.
•
The readout time of the MP3 disc is too long.
The readout time varies with the complexity of Do not use too many hierarchies and folders when
the recording configuration.
recording. Also, do not record any other types of au-
dio tracks together with MP3 files. (See page 11.)
The cassette holder cannot be opened.
Unable to record.
During tape playing, the power cord was unplugged. Plug in the power cord, and turn on the System.
Cassette record protect tabs are removed. Cover holes on back edge of cassette with tape.
Unable to operate the Remote Control.
•
•
The path between the Remote Control and the
sensor on the Unit is blocked.
The batteries have lost their charge.
•
•
Remove the obstruction.
Replace the batteries.
Operations are disabled.
The built-in microprocessor has malfunctioned due Unplug the System then plug it back in.
to external electrical interference.
Specification
Amplifier
Speaker Specifications (each unit)
Output Power 140 W per channel, min. RMS, driven
SP-MXKC4
into 6 Ω at 1kHz, with no more than
Type 3-way bass-reflex type
Speaker Unit Woofer: 16 cm cone × 1
Mid: 5cm cone × 1
Tweeter; 2cm dome × 1
Power Handling Capacity 140 W
10% total harmonic distortion
(IEC 268-3)
Input Sensitivity/Impedance (1 kHz)
AUX IN 400 mV/50 kΩ
Speaker terminals 6 Ω - 16 Ω
Phones 32 Ω - 1 kΩ
Impedance 6 Ω
Frequency Range 45 Hz - 22 000 Hz
Sound pressure level 87 dB/W·m
Dimensions 266 mm × 333 mm × 241 mm (W/H/D)
Mass Approx. 3.9 kg
15 mW/ch output into 32 Ω
Cassette Deck Section
Frequency Response
Type I (NORMAL) 63 Hz - 12 500 Hz
Wow And Flutter 0.15% (WRMS)
CD Player
Accessories
AM Loop Antenna (1)
Remote Control (1)
CD Capacity 3 CDs
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
Dynamic Range 85 dB
Signal-To-Noise Ratio 85 dB
Wow And Flutter Unmeasurable
Tuner
Power Specifications
Power Requirements AC 240V
Power Consumption 140 W (power on mode)
22 W (in Standby mode)
50Hz
FM Tuner
Tuning Range 87.50 MHz - 108.00 MHz
AM Tuner
Design and specifications are subject to change without notice.
Tuning Range 522 kHz - 1710 kHz
Unit
Dimensions 270 mm × 306 mm × 456 mm (W/H/D)
Mass Approx. 8.6 kg
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
0205NYMCREBET
© 2005 Victor Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPACT COMPONENT SYSTEM
SISTEMAS DE COMPONENTES COMPACTOS
SISTEMA DE COMPONENTES COMPACTOS
MX-KC4
Consists of CA-MXKC4 and SP-MXKC4
Consiste de CA-MXKC4, y SP-MXKC4
Consiste em CA-MXKC4, e SP-MXKC4
STANDBY/ON
SLEEP
AUX
FM /AM
FM MODE
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
RHYTHM AX MUTING
REMOTE CONTROL
SP-MXKC4
CA-MXKC4
SP-MXKC4
¡ATENCION!
Antes de operar su equipo, lea cuidadosamente este instructivo.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
INSTRUÇÕES
LVT1343-004A
[UW]
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings, Cautions and Others
Avisos, precauciones y otras notas
Advertências, precauções e outras notas
CAUTION
CAUTION –– % STANDBY/ON button !
Disconnect the mains plug to shut the power off completely (all lamps
and indications go off). The % STANDBY/ON button in any position
does not disconnect the mains line.
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
• When the unit is on standby, the STANDBY lamp lights red.
• When the unit is turned on, the STANDBY lamp goes off.
PRECAUCIÓN
Para reducir riesgos de choques eléctricos, incendio, etc.:
1. No extraiga los tornillos, los cubiertas ni la caja.
2. No exponga este aparato a la lluvia o a la humedad.
The power can be remote controlled.
PRECAUCIÓN –– Botón % STANDBY/ON !
Desconecte el enchufe tomacorriente para desconectar la alimenta-
ción completamente (se apagan todas las lámparas e indicaciones).
Ninguna posición del botón % STANDBY/ON conseguirá desconectar
la red de alimentación eléctrica.
• Cuando la unidad está en espera, la lámpara STANDBY se
enciende en rojo.
PRECAUÇÃO
Para reduzir riscos de choques elétricos, incêndio, etc.:
1. Não remova parafusos e tampas ou desmonte a caixa.
2. Não exponha este aparelho à chuva nem à umidade.
• Cuando la unidad está encendida, la lámpara STANDBY se apaga.
La alimentación puede controlarse mediante control remoto.
CUIDADO –– botão % STANDBY/ON !
Desligue a ficha da tomada da parede para desligar completamente a
alimentação (todas as luzes e indicadores apagam-se). O botão %
STANDBY/ON, quer esteja premido ou solto, não desliga a alimenta-
ção principal.
• Quando a unidade estiver em standby, a luz STANDBY fica vermelha.
• Quando a unidade estiver ligada, a luz STANDBY apaga-se.
A alimentação pode ser controlada à distância.
IMPORTANT FOR LASER PRODUCTS / IMPORTANTE PARA PRODUCTOS LÁSER /
IMPOTANTE PARA PRODUTOS LASER
IMPORTANT FOR LASER PRODUCTS
IMPORTANTE PARA PRODUCTOS LÁSER
1. CLASS 1 LASER PRODUCT
1. PRODUCTO LASER CLASE 1
2. CAUTION: Do not open the top cover. There are no user service-
able parts inside the unit; leave all servicing to qualified service
personnel.
2. PRECAUCIÓN: No abra la tapa superior. En el interior de la
unidad no hay piezas que pueda reparar el usuario; encargue el
servicio a personal técnico cualificado.
3. CAUTION: Visible and invisible laser radiation when open and
3. PRECAUCIÓN: Radiación láser visible e invisible en caso de
apertura o con interbloqueo averiado o defectuoso. Evite la
exposición directa a los haces.
interlock failed or defeated. Avoid direct exposure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED
INSIDE THE UNIT.
4. REPRODUCCIÓN DE LA ETIQUETA: ETIQUETA DE PRE-
CAUCIÓN, COLOCADA EN EL INTERIOR DE LA UNIDAD.
PARA PRODUTOS LASER, IMPORTANTE
1. PRODUTO LASER DE CLASSE 1
2. PRECAUÇÃO: não abrir a cobertura superior. Dentro da unidade
não existem partes cuja manutenção tenha de ser feita pelo
usuário; deixe qualquer manutenção a cargo do pessoal de
serviço qualificado.
3. PRECAUÇÃO: radiação laser visível e invisível quando se abre e
com a conexão interna em falha ou frustrada. Evite a exposição
direta ao raio.
4. REPRODUÇÃO DE ETIQUETA: ETIQUETA DE AVISO SITUADA
NO INTERIOR DA UNIDADE.
G-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front:
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom: Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.
No obstructions and open spacing.
Precaución: el aparato debe estar bien ventilado
Para evitar posibles riesgos de descargas eléctricas e incendios y prevenir cualquier posible daño, coloque el aparato del modo siguiente:
1 Parte delantera:
2 Laterales/ parte superior/
parte trasera:
No ponga nada delante, deje el espacio libre.
No se debería colocar nada en las áreas y las distancias que se detallan a continuación.
3 Parte inferior:
Coloque el aparato sobre una superficie recta. Debe haber buena circulación de aire; para ello, coloque el
aparato sobre una base a una altura mínima de 10 cm.
Precaução: Ventilação adequada
Para evitar riscos de choques elétricos e incêndios, e prevenir avarias, instale o aparelho como segue:
1 Parte frontal:
Sem obstruções e espaços abertos.
2 Partes laterais/ tampa/ posterior: Nenhuma obstrução deverá ser colocada entre as áreas cujas dimensões são indicadasabaixo.
3 Parte inferior:
Instale-o sobre uma superfície plana. Deverá ser mantido espaço suficiente para a ventilação se este for
instalado numa posição que tenha uma altura de 10 cm ou mais.
Front view
Side view
Vista frontal
Vista lateral
Visão frontal
Visão lateral
15cm
15cm
15cm
1cm
1cm
15cm
15cm
10cm
CAUTION
CUIDADO
1. Do not block the ventilation openings or holes.
1. Não tape as aberturas ou os orifícios de ventilação.
(Se tapar as aberturas ou orifícios de ventilação com um jornal,
um pano, etc., o calor não sai).
(If the ventilation openings or holes are blocked by a newspaper or
cloth, etc., the heat may not be able to get out.)
2. Do not place any naked flame sources, such as lighted candles,
on the apparatus.
3. When discarding batteries, environmental problems must be con-
sidered and local rules or laws governing the disposal of these bat-
teries must be followed strictly.
4. Do not expose this apparatus to rain, moisture, dripping or splash-
ing and that no objects filled with liquids, such as vases, shall be
placed on the apparatus.
2. Não coloque objectos com chama, como velas acesas, em cima
do aparelho.
3. Quando se desfizer das baterias, deve ter em consideração os
problemas ambientais e respeitar integralmente os regulamentos
e leis locais relativos à forma de deitar fora as baterias.
4. N'exposez pas cet appareil àj la pluie, àj l'humiditàm, àj un
àmgouttement ou àj des àmclaboussures et ne placez pas des
objets remplis de liquide, tels qu'un vase, sur l'appareil.
PRECAUCION!
1. No obstruya las rendijas o los orificios de ventilación.
(Si las rendijas o los orificios de ventilación quedan tapados con
un periódico, un trozo de tela, etc., no se podrá disipar el calor).
2. No ponga sobre el aparato ninguna llama al descubierto, como
velas encendidas.
3. Cuando tenga que descartar las pilas, tenga en cuenta los proble-
mas ambientales y observe estrictamente los reglamentos o las
leyes locales sobre disposición de las pilas.
4. No exponga este aparato a la lluvia, humedad, goteos o salpica-
duras. Tampoco ponga recipientes conteniendo làqquidos, como
floreros, encima del aparato.
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
In it you will find all the information you need to set up and use the system.
If you have a query that is not answered by the manual, please contact your dealer.
Features
Here are some of the things that make your System both powerful and simple to use.
❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the
music.
• With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or
CD Player with a single touch.
❏ The great SEA (Sound Effect Amplifier) effects Rock, Pop and Classics are provided.
❏ The RHYTHM AX provides rich sound even at low sound levels.
❏ A 45-station preset capability (30 FM and 15 AM) in addition to auto-seek and manual tuning.
❏ CD changer function can operate 3 discs.
• Discs can be changed during play using the Carrousel tray (rotational tray).
• Continuous, random or program play of 3 discs.
❏ Two Decks enabling tape dubbing.
❏ Timer functions; Daily Timer, REC (Recording) Timer, and Sleep Timer.
❏ You can connect various external units, such as an MD recorder.
❏ The CD Player can play back a CD-R and CD-RW.
How This Manual Is Organized
• Basic information that is the same for many different functions - e.g. setting the volume - is given in the section “Basic Operations”,
and not repeated under each function.
• The names of buttons/controls and display messages are written in all capital letters: e.g. FM/AM, “NO DISC”.
• If the button names on the Unit and the Remote Control are the same, the description on where the button is used will be omitted.
• System functions are written with an initial capital letter only: e.g. Normal Play.
Use the table of contents to look up specific information you require.
We have enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.
IMPORTANT CAUTIONS
Installation of the System
• Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C.)
• Leave sufficient distance between the System and a TV.
1
• Do not use the System in a place subject to vibrations.
Power cord
• Do not handle the power cord with wet hands!
2
• Some power is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the System from the wall outlet, always pull the plug, not the power cord.
Malfunctions, etc.
3
• There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the System.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents..........................................................................................................2
Set the VOLTAGE SELECTOR Switch................................................................................................. 3
Using the Remote Control....................................................................................................................... 4
Connecting the AM Antenna................................................................................................................... 5
Connecting to the Wall Outlet................................................................................................................. 6
COMPU Play........................................................................................................................................... 6
Basic Operations...........................................................................................................7
Turning the Power On and Off................................................................................................................ 7
Fade-out Muting (FADE MUTING)....................................................................................................... 8
Enjoying the Powerful Sound (RHYTHM AX)...................................................................................... 8
Entering the Number with the Remote Control (Numeric Keys)............................................................ 8
Using the Tuner.............................................................................................................9
Using the CD Player....................................................................................................11
Changing the MP3 Playback Mode....................................................................................................... 12
Using the Cassette Deck (Recording) ......................................................................17
Listening to the External Equipment..................................................................................................... 19
Using the Timers .........................................................................................................20
Setting the Daily Timer ......................................................................................................................... 21
Setting the REC (Recording) Timer ...................................................................................................... 22
Setting the SLEEP Timer ...................................................................................................................... 24
Timer Priority ........................................................................................................................................ 24
Care And Maintenance................................................................................................25
Troubleshooting..........................................................................................................26
Specification................................................................................................................26
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Accessories
Make sure that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
FM Wire Antenna (1)
Remote Control (1)
Batteries (2)
AC Plug Adaptor (1)
If any of these items are missing, contact your dealer immediately.
Set the VOLTAGE SELECTOR Switch
To avoid damaging the System, set the voltage before plugging in the System.
Set the correct voltage for you area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector so
the number the voltage mark is pointed at is the same as the voltage.
Voltage mark
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
How To Put Batteries In the Remote Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6P(SUM-3)/AA(15F)
CAUTION:
• Handle batteries properly.
❏ To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
Remote sensor
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
FM wire antenna (supplied)
Extend the supplied FM Wire
Antenna horizontally.
Strip vinyl shield from cut
line, twist wire core.
Using an FM 75-Ohm Antenna Cable (not Supplied)
If reception is poor, connect the outside antenna.
Outdoor FM antenna cable (not supplied)
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied
FM Wire Antenna.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the AM Antenna
Rear Panel of the Unit
AM antenna wire (not supplied)
If reception is poor, connect the
outside antenna.
Turn the loop until you have
the best reception.
AM loop antenna (Supplied)
Attach the AM loop to its base by
snapping the tabs on the loop
into the slot in the base.
• Even when connecting an outside AM antenna, keep the indoor AM loop connected.
CAUTION:
• To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.
Connecting the Speakers
Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. “Right” / “Left” is labeled
on the rear of the speaker.
1. Open each of the terminals to connect the speaker wire leads.
2. Connect the speaker cords to the Speaker terminals of the Unit.
Connect the gray (+) and gray with black stripe (–) cords of the right side speaker to the red (+) and black (–) terminals marked RIGHT
on the System.
Connect the gray (+) and gray with black stripe (–) cords of the left side speaker to the red (+) and black (–) terminals marked LEFT on
the System.
3. Close each of the terminals.
Right side (rear view)
Left side (rear view)
Gray
Gray
Gray with
black
stripe
Graywith
black
stripe
CAUTIONS:
• A TV may display irregular colors if located near the speakers. If this happens, set the speakers away
from the TV.
• Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting External Equipment
Connect a signal cord with stereo mini plugs (not supplied) between the System’s AUX jack on the front panel and the audio output jack
or output terminals of the external portable CD, MD player, STB, etc.
You can then listen to the external source through the System.
Signal cord (not supplied)
White
Lch
Rch
To audio output of
external equipment.
Red
Connecting to the Wall Outlet
Plug the AC power cord into the wall outlet.
Now, your System is at your command!
DEMO Mode
When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops.
To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.
CANCEL/DEMO
(For 2 seconds)
• While the System is turned on, the DEMO display will automatically starts if no operation is made for 2 minutes. To cancel
this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play
button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not
ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
CD Open/Close 0button
On the Remote Control
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
)
STANDBY/ON
STANDBY/ON
SLEEP
Display
Numeric
AUX
RHYTHM AX
indicator
keys
FM /AM
FM MODE
SOUND MODE
VOLUME
RHYTHM AX
STANDBY/ON
CD
CD1
CD2
CD3
PHONES
STANDBY indicator
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
SOUND
MODE
FADE
MUTING
VOLUME +, –
RHYTHM AX
FADE MUTING
RHYTHM
AX
REMOTE CONTROL
Various information
Sound Mode indicator
Level bar
Status bar (Indicates various statuses.)
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
Turning the Power On and Off
Turning the System On
Adjusting the Volume
Press the
STANDBY/ON button.
1
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
STANDBY/ON
or
The display comes on and “POWER ON” is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
You can set the volume level to MIN, 1-31, or MAX.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
• When you turn the power off at a volume level of over 19,
the volume level is automatically set to 18 when the power
is turned back on.
Turning the System Off
Press the
STANDBY/ON button again.
CAUTION:
1
STANDBY/ON
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
or
“GOOD BYE” is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Fade-out Muting (FADE MUTING)
Entering the Number with the
Remote Control (Numeric Keys)
You can mute the output with one touch operation.
You will use the number keys on the Remote Control to enter num-
bers for presetting stations, recalling the preset stations, or pro-
gramming the playing tracks on CDs.
To muting the output, press the FADE MUTING button on the
Remote Control. The output is faded out.
To release muting, press the FADE MUTING button once
again. The output is faded in to the previous level.
How to enter the number with the number keys is explained here.
Examples:
• To enter number 5, press 5.
• To enter number 15, press +10, then 5.
• To enter number 20, press +10, then 10.
• To enter number 25, press +10, +10, then 5.
• After Fade-out Muting, turning the VOLUME control on the
unit or pressing the VOLUME button on the Remote Control
will increase the volume from the previous level.
Enjoying the Powerful Sound
(RHYTHM AX)
Using RHYTHM AX, harder-hitting beats intensify your listening
experience even at low sound levels.
RHYTHM AX also works even when the song has no “beat,” such
as classical music, so that you can listen to the rich sound even at
low sound levels.
This function only affects the playback sound, not your recording.
Press down the RHYTHM AX control.
“RHYTHM AX” appears and the display return to
the Music Source Selecting mode.
• Each time you press down the control, RHYTHM
AX turns on and off alternately.
• The RHYTHM AX lamp also lights up.
When using the remote control, press RHYTHM AX.
• Each time you press the button, RHYTHM AX turns on and off
alternately.
• Each time you turn the RHYTHM AX on or off, you will hear
a gap in the playback.
Selecting the Sound Mode
(SOUND MODE)
You can select one of 3 SEA (Sound Effect Amplifier) modes.
You can use this effect only for playback.
To get the effect, press the SOUND MODE button until Sound
Mode you want appears on the display.
The “SOUND MODE” indicator lights up in the display.
Each time you press the button, the Sound Mode changes as fol-
lows:
ROCK
=
POP
=
CLASSIC
=
FLAT
=
(back to the beginning)
To cancel the effect, press the SOUND MODE button until
“FLAT” appears on the display.
The “SOUND MODE” indicator goes off.
ROCK
Boosts low and high frequencies. Good for
acoustic music.
POP
CLASSIC
Good for vocal music.
Set for wide and dynamic sound stereo
systems.
FLAT
No sound effect applies.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
STANDBY/ON
SLEEP
Numeric
AUX
keys
FM /AM
FM MODE
FM/AM
SET
FM MODE
FM/AM
1
Á
7
CD
CD1
CD2
CD3
1
Á
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Band display, Frequency display, Preset channel
FM mode indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Tuning In a Station
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See pages 4 and 5.)
Press the FM/AM button.
1
The Band and Frequency you were last tuned to appear on the
display.
Setting the AM Tuner Interval Spacing
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
When shipped, the AM tuner interval is set to 10 kHz spacing (100
kHz spacing for FM broadcast). You can change it to 9 kHz spacing.
To select 9 kHz intervals, press the 7 button on the Remote
Control for more than 2 seconds in Standby mode, “AM-10” ap-
pears on the display, then press the 9 button on the Remote Control
(at the same time, the 50 kHz spacing is selected for FM broad-
cast).
FM /AM
or
To select 10 kHz intervals again, press the 7 button on the
Remote Control for more than 2 seconds in Standby mode, “AM-
9” appears on the display, then press the 10 button on the Remote
Control.
on the Unit on the Remote Control
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Using the Unit
Select a station using one of the following
2
methods.
Select a band by pressing the FM/AM button.
1
2
• Manual Tuning
Press the
tion.
or
button to tune in a sta-
22 Á
Briefly press the 22or
Á
button to move from frequency
to frequency until you find the station you want.
OR
• Auto Tuning
If you hold down the 22 or Á button for 1 second or
more and then release it, the frequency changes down, or up,
automatically until a station is found.
OR
Press the SET button.
3
4
“SET” will blink for 5 seconds.
While “SET” is blinking, press the
4
or
¢
button to select the preset number.
¢: Increases the preset number by 1.
4: Decreases the preset number by 1.
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset number you want, using the 4 or ¢
button.
Press the SET button.
5
6
“STORED” appears and, after 2 seconds, the display returns to
the band/frequency display.
Example:
Repeat above steps 2 to 5 for each station
you want to store in memory with a preset
number.
Press the ¢ button until the preset number “P12” appears
on the display. Then, the display will show the preset
number’s band and frequency.
To change the preset stations, repeat the same steps as
above.
• In step 4, you can select the preset number using the nu-
meric keys on the Remote Control. See “Entering the
Number with the Remote Control” on page 8.
Preset tuning using the Remote Control:
Enter the preset number you want to recall using the numer-
ic keys. See “Entering the Number with the Remote Con-
trol” on page 8.
CAUTION:
Example:
• Even if the System is unplugged or if the power
failure occurs, the preset stations will be stored
for a few days. However, in case the preset sta-
tions are erased, you will need to preset the sta-
tions again.
Press +10, then 2 to recall the preset number 12. Then, the
display will show the preset number’s band and frequency.
• In AM broadcast, reception sensitivity will be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
To Change the FM Reception
Mode
Presetting Stations
When you are tuned in to an FM stereo broadcast, the “ST (Ster-
eo)” indicator lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but you lose stereo effect.
You can preset up to 30 FM stations and up to 15 AM stations.
Press the FM MODE button on the Remote Control so
that the “MONO” indicator lights up on the display.
• Preset numbers may have been set to factory test fre-
quencies prior to shipment. This is not a malfunction. You
can preset the stations you want into memory by following
one of the presetting methods below.
• During presetting stations, if no button operation is made
for 5 seconds, the display returns to the band/frequency
display. In this case, repeat steps from the beginning.
FM MODE
ST
MONO
To restore the stereo effect, press the FM MODE button on
the Remote Control so that the “MONO” indicator goes off.
Selecting other station will also cancel the FM Mono mode and re-
store the stereo effect.
TUNING
or
SET
PRESET
or
SET
FM=30, AM=15
When changing the Band
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
REPEAT
PROGRAM
STANDBY/ON
RANDOM
CD Open/
Close 0
Numeric
SLEEP
keys
AUX
DISC SKIP
CD 6
FM /AM
FM MODE
SET
4
¢
CANCEL
CD1-CD3
7
CD1-CD3
CD
CD1
CD2
CD3
CD 6
1
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
Á
7
REPEAT
PROGRAM
/RANDOM
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Program indicator
Track number, Playing time, Program number, etc.
MP3 indicator
Disc indicators
Random Repeat
indicator indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
This unit has been designed to playback the following CDs:
• Audio CD
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
More about MP3 discs
• MP3 disc (MP3 files recorded on a CD-R or CD-RW)*
• MP3 discs (either CD-R or CD-RW) require a longer read-
out time. (It varies due to the complexity of the recording
configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This unit does not support multisession recording.
• This unit can play MP3 files only with the following file ex-
tensions— “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• Non-MP3 files are ignored. If non-MP3 files are recorded
together with MP3 files, this unit will take a longer time to
scan the disc. It may also cause the unit to malfunction.
• Some MP3 discs may not be played back because of
their disc characteristics or recorded conditions.
Only CDs bearing these marks can be
used with this System. However, con-
tinued use of irregular shape CDs
(heart-shape, octagonal, etc.) can dam-
age the System.
Recordable
ReWritable
When playing a CD-R or CD-RW
• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWri-
table) can be played back when they are already “finalized.”
• Before playing back CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time since the reflect-
ance of CD-RWs is lower than for regular CDs.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be recom-
mended.
*For MP3 discs
• This unit manages files and folders on MP3 discs as “tracks”
and “albums.”
• Playback order of the MP3 files (tracks) recorded on a disc are
determined by the writing (or encoding) application; therefore,
playback order may be different from the one you have
intended while recording the files and the folders.
• This unit shows the file (track) names and ID3v2 tags (only
“Title”, “Artist” and “Album”) on the display after starts play;
however, there is a limitation on available characters and some
file names and ID3 tags are not shown correctly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
❏ When you use an 8 cm CD, place it on the inner circle of the tray.
About Disc Indicator:
❏ You can load CDs while listening to the other source or while
listening to the CD being played back.
Disc Rotation
indicator
Disc Number
indicator
❏ When power is turned off with the tray opened, the tray is auto-
matically closed.
Selected Disc
indicator
❏ If the CD cannot be read correctly (because it is scratched, for
example), “ NO DISC” appears on the display.
The Disc indicator consists of the following three kinds of indica-
tors:
To Unload CDs
Disc Number indicator: Lights all the time.
Selected Disc indicator:Lights for the currently selected
disc number.
Disc Rotation indicator:Runs when the selected CD is
playing or paused. This indicator
Take out the CD as shown below.
While the CD Player is stopped, press the CD
1
0
Open/Close
tray.
button on the Unit to open the
goes out if a CD is not loaded for
the selected disc number.
Remove the CD, then press the DISC SKIP
button on the Unit.
The tray turns for the next CD.
2
One Touch Play
The power comes on, and operations are done automatically.
Repeat step 2 to remove all the CDs.
3
4
❏ By pressing the CD 6button, the System will come on, and if
a CD is loaded for the disc number that was lastly selected, it
will start playing from the first track.
0
Press the CD Open/Close
Unit to close the tray.
button on the
❏ By pressing the CD1-CD3 button, the System will come on, and
if a CD is already loaded for the selected disc number, it will
start play from the first track.
❏ You can remove CDs while listening to the other source.
Tips:
• Removing/changing the CDs during playback
While playing back a CD (e.g. CD1), you can remove or change
the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close
0 button. After removing or changing, press the same button to
close the tray.
To Load CDs
0
Press the CD Open/Close
Unit to open the tray.
button on the
1
2
Changing the MP3 Playback Mode
Place one or two CDs, with its label side up,
onto the tray.
Be sure that the CD is securely seated inside the recess on the
disc tray.
When playing an MP3 disc, you can choose the playback mode of
the MP3 disc as follows:
TRACK mode:
The unit recognizes only tracks (files). You can play an MP3 disc
like an Audio CD.
With the label side up
GROUP mode:
The unit recognizes tracks (files) and albums (folders) on an MP3
disc. You can play an MP3 disc according to the way how they are
grouped.
On the remote control ONLY:
Press MP3 before or during playing an MP3 disc.
GROUP indicator appears when the MP3
playback mode is the GROUP mode.
Press the DISC SKIP button on the Unit and
place the next CD.
When you press the button, the tray turns for the next CD.
3
4
• Each time you press the button, the MP3 playback mode
changes between “GROUP” and “TRACK” alternately.
0
Press the CD Open/Close
Unit.
The tray is closed.
button on the
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
GROUP mode
Basics of Using the CD Player-
Normal Play
Total track number
To Play CDs
Total group number
To pause, press the CD 6button. The playing time indication
blinks on the display.
Load CDs.
1
2
To cancel pause, press the CD 6button again. Play continues
Press one of the Disc button (CD1-CD3) you
want to play.
The selected disc number (e.g. “CD DISC 1”) appears on the
display.
The first track of the selected CD begins playing. When the
first CD finishes playing, the next and the third CDs are con-
tinuously played back.
When the last CD has finished playing, the CD Player auto-
matically stops.
from the point where it was paused.
Tips:
• Playing back the CD using the DISC SKIP button
You can also play the CDs using the DISC SKIP button. During
playback, each time you press the button, the next CD is automat-
ically played back. If the next disc tray is empty, the disc tray is
automatically skipped.
To Select a Track
❏ You can start to play the currently selected disc by simply press-
ing the CD 6button.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the track you want to
play, except for MP3 group mode.
By pressing the button, you can skip to the next track or skip back
to the previous track.
While playing the CD, the following will appear on the display.
For Audio CD
• The selected track starts playing.
CD is
playing
• Press the ¢ button once to skip to the beginning of the next
track.
Track number Elapsed playing time
• Press the 4 button to skip to the beginning of the current
track. Press twice quickly to skip to the beginning of the previ-
ous track.
For MP3 disc
TRACK mode
In Stop mode (using the 4or ¢button):
By briefly pressing the 4or ¢button, the CD Player operates
in the same way as during playback, except for MP3 group mode.
Track number
Using the numeric keys on the Remote Control:
Using the numeric keys, you can directly select the track on the
currently selected CD.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
• The selected track starts playing.
For example, press +10, then 5 to play back the track number 15.
See “Entering the Number with the Remote Control” on page 8.
In MP3 group mode:
GROUP mode
The selected track of the current group starts playing.
Tips:
• For MP3 discs
Track number of the current group
When the selected track starts playing, information of that track
scrolls on the display, in the order of file name, title, artist, and al-
bum.
In the STOP mode, the file name (TRACK mode), the group name
and the file name (GROUP mode) scroll on the display.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
When the Disc button (CD1-CD3) is pressed with the tray opened,
the tray is closed and the selected CD automatically begins play-
ing.
To Select a Group (For MP3 GROUP mode only)
To stop playing the CD, press the 7button. The following in-
formation for the CD is displayed.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play.
For Audio CD
• The first track of the selected group starts playing.
In Stop mode (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play. The group number, the group name and the file name scroll
on the display.
Total playing time
Total track number
For MP3 disc
TRACK mode
Search Play
Holding down the following buttons, during playback, will fast
forward/backwards the CD so you can quickly find a particular
passage in the track you are listening to.
Total track number
• 22or Ábutton on the Unit
• 4or ¢button on the Remote Control
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Using the Remote Control
Press the numeric keys to directly enter the track number. Then,
the program order number will be assigned from P-1.
• To delete the current program step, press the CANCEL button
on the Unit.
Programming the Playing Order
of the Tracks
You can program the playing order of the tracks on all the CDs. Note
that you can only make a program when the CD Player is stopped.
Repeat steps 3 and 4 to program other tracks
on the same CD or the other CD.
5
❏ You can program up to 32 tracks in any desired order including
the same tracks.
6
To play the program, Press the CD
ton.
but-
6
For details, see “To Play the Program You Have Made” men-
tioned below.
For MP3 discs
• If you try to select a MP3 disc that has once been read or
played, “MP3 DISC” appears on the display and it can not
be programmed.
• MP3 disc that has not ever been read can be selected in
a program mode. But when playback starts, “MP3 DISC”
appears on the display, the program is deleted and
switched to a next program.
To confirm the programmed contents, while the CD player
is stopped, select Program mode by pressing the PROGRAM but-
ton and press the 4or ¢button on the Remote Control.
To delete all the tracks in the program, while the CD Player
is stopped, press the 7button or open the tray by pressing the CD
Open/Close 0button.
To Modify the Program, while the CD Player is stopped and the
program mode is selected, press the CANCEL button, the last track
in the program is deleted. To add new tracks to the end of the pro-
gram, repeat above steps 3 and 4.
To Make a Program
Load CDs.
1
In Stop mode, set the CD Player in Program
2
Play mode.
• If you try to program a track number that does not exists
on the CD, your entry will be ignored.
• If you try to program the 33rd track, “FULL” appears on
the display.
On the Unit
Press the PROGRAM button to light the “PRGM” indicator on the
display.
At the same time, “PROGRAM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until “PROGRAM” ap-
pears on the display.
The “PRGM” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If a program is already made, the last step of the program will
be displayed.
To Play the Program You Have Made
Press the CD 6button.
The System plays the tracks in the order you have programmed
them.
• To use Repeat Play for Program Play, press the REPEAT but-
ton to select “REPEAT” before starting playback. For details,
see “Repeating Tracks” on page 15.
❏ You can skip to a particular program track by pressing the 4
or ¢button during Program Play.
Press one of the Disc button (CD1-CD3) to
select the CD you want to program.
The display will change to the Program Entry display.
3
❏ To stop playing, press the 7button once. If you press the 7but-
ton, while the CD Player is stopped, the program is deleted.
CD1
To Exit and Re-enter Program Play
or
The program you have made is stored in memory. So, you can exit
Program Play temporarily or re-enter Program Play unless you de-
lete the program.
To exit the program mode once, press the 7 button to stop
playing. The “PROG” indicator goes off and the Program mode
will be canceled. The program is stored in the memory.
To re-enter Program Play mode, press the PROGRAM or
PROGRAM/RANDOM button until the “PRGM” indicator lights
up again.
Disc number Track number
Select the track you want to program.
4
Using the Unit
While the display is blinking, press the
Unit to select the track, then press the SET button within 5 seconds.
The program order number will be assigned from P-1.
4
or
¢
button on the
• When the power is turned off (standby mode), the pro-
grammed tracks are deleted.
• Tray will not open during the program playback.
Disc number Track number
Program order number
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Random Play
Tray Lock Function
The tracks of the selected CD will play in no special order when
you use this mode.
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close 0button on the Unit is pressed.
In Stop mode, set the CD Player in Random
1
Play mode.
On the Unit
Locking the Tray
Press the RANDOM button to light the “RNDM” and “1 DISC”
indicator.
At the same time, “RANDOM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the “RANDOM”
appears on the display.
Turn on the System and enter CD mode.
1
2
While pressing down the 7button, press the
0
CD Open/Close
button on the Unit.
“LOCKED” appears on the display.
The “RNDM” and “1 DISC” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If you try to open the tray by pressing the CD Open/Close 0
button, “LOCKED” appears on the display to let you know that
the tray has been locked.
6
Press the CD
button.
2
The tracks on all the CDs are played in random order.
To stop playing, press the 7button. The Random mode is can-
celed and the “RNDM” and “1 DISC” indicator goes off.
To skip a track during playback, press the ¢ button to
jump to the next track in the random sequence.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Now, you can use the tray normally.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
REPEAT ALL=REPEAT 1DISC=REPEAT 1=Blank display
=(back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
REPEAT 1DISC:Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1:
Repeats one track.
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEATïBlank display
It repeats all the tracks in the program.
To stop playing, press the 7button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the Repeat indicator goes off.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Listening to a Tape)
STANDBY/ON
SLEEP
TAPE A 3
AUX
TAPE B 3
FM /AM
7
4
¢
FM MODE
CD
CD1
CD2
CD3
22
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
TAPE B 3
TAPE A 3
A
TAPE
B
(Deck B)
(Deck A)
Á
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play, record, and dub audio tapes.
Close the cassette holder gently.
3
4
❏ Listening to type I tape is suitable for this Cassette Deck.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
3
3
Press the TAPE A
or TAPE B
button.
The selected Deck appears (for example, TAPE-A) and the
Deck indicator “A” or “B” lights up on the display.
The Tape indicator (3) blinks on the display and the tape is
played back.
One Touch Play
The Cassette Deck automatically stops when one side of the
tape has finished playing.
By pressing the TAPE A
3
or TAPE B
3
button, the System will
come on, and if a tape is in the deck, it will start to play. If no tape
is loaded, “NO TAPE” appears on the display, the System will
come on and wait for you to insert a tape, or select another function.
To stop playing, press the 7button.
To remove the tape, stop the tape, and press the 0 PUSH
OPEN part to open the Cassette Holder.
To Fast-Wind a Tape
Playing a Tape
During playback or in Stop mode, press the Á(FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the ¢button on the Remote Control.)
During playback or in Stop mode, press the 22(REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the 4button on the Remote Con-
trol.)
You can use either Deck A or Deck B at a time for playback.
0
Press the
you want to use.
PUSH OPEN part for the deck
1
2
When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
During fast-winding the tape, the Tape indicator (3) goes out.
During fast-winding, the status bar illumination at the bottom of
the display moves counterclockwise.
During rewinding, it moves clockwise.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
down, toward the base of the Unit.
The tape will travel from the left to right.
❏ During fast-winding the tape, you can change the tape travelling
direction by pressing the Á(FF) or 22(REW) button.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the 0PUSH OPEN part again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
STANDBY/ON
REC START/STOP
SLEEP
CD REC START
AUX
PROGRAM
DUBBING
FM /AM
FM MODE
7
TAPE B 3
TAPE A 3
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
A
TAPE
B
(Deck A)
(Deck B)
TAPE A 3
TAPE B 3
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
REC indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Recording onto a cassette from any of the sound sources is simple.
Just place a tape in Deck B, have the source ready, make one or
two settings, and you’re ready to record. For each source, the pro-
cedure is a little bit different so we explain each separately. But
first, here are a few things to make your recordings better.
• At the start and end of cassette tapes, there is leader tape
which cannot be recorded onto. Thus, when recording
CDs, radio broadcasts, etc., wind on the leader tape first
to ensure getting the beginning of the recording.
Things To Know Before You Start Recording
❏ It may be unlawful to record or playback copyright ma-
terial without the consent of the copyright owner.
CAUTION:
❏ The recording level, which is the volume at which the new tape
is being made, is automatically set correctly, so it is not affected
by the VOLUME Control on the System. Also, it is not affected
by adjusting the sound effects. Thus, during recording, you can
adjust the sound you are actually listening to without affecting
the recording level.
• If a recording you make has excessive noise or
static, the Unit may have been too close to a TV
which was on during the recording. Either turn
off the TV or increase the distance between the
TV and the Unit.
❏ Two small tabs on the back of the cassette tape, one for side A
and one for side B, can be removed to prevent accidental erasure
or recording.
Adhesive tape
❏ To record on a cassette with the tabs removed, you must cover
the holes with adhesive tape first.
❏ Type I tape can be used for recording.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
Press the CD REC START button on the Unit.
“CD REC” appears on the display and the “REC” indicator
lights up. Then, the System begins CD Synchro Recording and
the tracks on the CD are recorded on the tape.
When recording of the tracks of all CDs is finished, the CD
Player and Cassette Deck stop.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
• After the CD Player has played the entire CD or all the pro-
grammed tracks, the tape automatically stops.
2
3
Standard Recording
This is the basic method for recording any source. The System also
has special ways for recording CD to tape, and tape to tape, which
save you time and effort, as well as give you some special effects.
However, when you need to add a selection to a tape you have
made, or are combining selections from several sources on one
tape, use the method described below; just substitute the source
you want into this procedure, such as a tape in Deck A, a CD, or
the Tuner. You can also record from an external equipment with
this procedure.
To Record Any Sound Source to Tape
Follow these steps to record from any sound source onto a tape in
Deck B.
To stop at any time during the recording process, press
the 7button. The CD Player and Cassette Deck stop.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
• When making SLEEP timer settings while doing CD Syn-
chro recording, set enough time to allow for the CD to fin-
ish playing, otherwise the power will go off before
recording is completed.
Tape to Tape Recording (DUB-
BING)
Tape travelling direction
Prepare the source, by, for example, tuning
in a radio station, loading CDs, or turning on
connected equipment.
• For CD recording, see “CD Synchro Recording” mentioned
below.
2
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
Press the TAPE A 3 button, and then press
the 7button.
Insert the source cassette you want to copy
from into Deck A for playback.
1
2
3
4
• For dubbing, see “Tape to Tape Recording (DUBBING)”
described below.
Press the REC START/STOP button on the
3
Unit.
Insert a blank or erasable cassette you want
to copy onto into Deck B for recording.
The “REC” indicator lights up and the System begins record-
ing.
The Tape indicator (3) blinks on the display.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
Press the DUBBING button on the Unit.
Deck A and Deck B will start simultaneously and the “REC”
indicator lights up.
During dubbing, the Deck indicators “A” and “B” light up al-
ternately.
To stop during recording, press the REC START/STOP but-
ton on the Unit, or press the 7button.
• If no tape is inserted into Deck A, “NO TAPE” will appear
on the display.
• If no tape is inserted into Deck B, “NO TAPE” will appear
on the display.
Recording an AM Station to Tape (Beat Cut)
When recording an AM broadcast, beats may be produced which are
not heard when listening to the broadcast. If this happens, press the
FM MODE button on the Remote Control to eliminate the beats.
To stop dubbing, press the REC START/STOP button on the
Unit or the 7button.
Set to AM station and start recording.
1
2
Press the FM MODE button on the Remote
Control to eliminate the beats.
Each time you press the button, the display changes as shown
below:
• During dubbing, you can hear sound effects through the
speakers or headphones. However, the sound is dubbed
without sound effects.
BEAT 1 ïBEAT 2
CD Synchro Recording
Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have set in a program.
Prepare CDs. (See page 12.)
1
Press the CD1-3 button (that you want to make recording), and
then press the 7button.
• If you want to record specific tracks only, you need to pro-
gram the tracks beforehand. (See page 14.)
• If you want to record one CD only, you need to load one
CD only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an External Equipment
STANDBY/ON
SLEEP
AUX
AUX
FM /AM
FM MODE
AUX
CD
CD1
CD2
CD3
AUX jack
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Listening to the External
Equipment
You can listen to the external equipment such as portable CD, MD
player, STB, or other auxiliary.
❏ First, make sure that the external equipment is properly connect-
ed to the System. (See page 6.)
Set the volume level to the minimum posi-
tion.
1
Press the AUX button.
“AUX IN” appears on the display.
2
Start playing the external equipment.
3
4
Adjust the volume level to the level you want
listen to.
Apply the following sound effects, if you
5
wish.
• RHYTHM AX (See page 8.)
• Sound Mode (See page 8.)
• For operation of the external equipment, refer to its In-
structions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
STANDBY/ON
SLEEP
SLEEP
AUX
FM /AM
FM MODE
CLOCK/TIMER
SET
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
¢
4
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
DAILY Timer indicator
SLEEP indicator
REC (Recording) Timer indicator
Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Three types of timers are available:
DAILY Timer
Fixing the Clock
Use this timer to set wake up everyday to music from any
source, instead of an alarm clock.
Using the Unit
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the
starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automatically after
a certain length of time.
Press the
on the System.
STANDBY/ON button to turn
1
Press the CLOCK/TIMER button repeatedly
until clock setting display (time indication)
2
appears on the display.
Setting the Clock
Each time you press the button, display changes as follows:
DAILY
=
ON TIME
=
REC
=
ON TIME
=
Clock Setting
When you plug the AC power cord into the wall outlet, the time in-
dication “0:00” blinks on the display.
display (time indicator)
=
Canceled
=
(back to the beginning)
You can set the clock whether the System is on or off.
Press the SET button.
3
4
The hour digits of the current clock blink on the display.
Using the Unit
Follow steps 2 to 5 of “Setting the Clock” men-
tioned above.
Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
1
4 ¢
Press the
or
button to set the hour.
2
Pressing the ¢button moves the time forwards and pressing
the 4button moves it backwards. Holding down the button
moves the hour rapidly.
• The clock must be correctly set for the timers to work.
• Each setting step must be completed within approx. 30
seconds. Otherwise, the setting is cleared and must be
repeated from the beginning.
• The clock may gain or lose one to two minutes per month.
• If there is a power failure, the clock loses its setting
immediately. “0:00” blinks on the display and the
clock must be reset.
Press the SET button.
The minute digits of the time indication blink on the display.
• To return to the hour setting, press the CANCEL button.
3
4 ¢
Press the
or
button to set the minute.
4
5
Press the SET button.
“CLOCK OK” appears on the display. Then, the selected time
is set and the seconds start counting from 0.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
2. Press the ¢or 4button to set the minute, then press the
SET button.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at
the same time every day.
The Timer indicator ( ) and “DAILY” indicator on the display
shows that the Daily Timer you have set is in effect.
You can set the Daily Timer whether the System is turned on or
off.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
• You can set the Daily Timer whether the System is on or off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
Setting the OFF time (Example: 13:15).
1. Press the ¢ or 4 button to set the hour you want the
System to be turned off, then press the SET button.
The minute digits of the OFF time blink on the display.
3
Using the Unit
Press the CLOCK/TIMER button until “ON
TIME” immediately after “DAILY” appears on
1
the display.
At this time, “DAILY” indicator blinks and the Timer indica-
tor ( ) lights up on the display.
Each time you press the button, the display changes as follows:
DAILY =ON TIME* =REC =ON TIME =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the Daily Timer setting.
2. Press the ¢or 4button to set the minute, then press the
SET button.
Then, the System enters ON-time setting mode, and the current
ON time appears on the display and the hour digits blink.
The System enters Music Source Selecting mode and
“TUNER FM” appears on the display.
Selecting the music source.
4
Press the ¢ or 4 button to select the music source you
want to listen to, then press the SET button.
Each time you press the ¢or 4button, the display chang-
es as shown below:
Setting the ON time (Example: 10:15).
1. Press the ¢ or 4 button to set the hour you want the
System to come on, then press the SET button.
2
TUNER FM =TUNER AM = CD =TAPE =AUX
The minute digits of the ON time blink on the display.
Pressing the ¢button moves the time forwards and press-
ing the 4button moves it backwards.
IN =(back to the beginning)
According to the music source you have selected, the next op-
eration differs.
Holding down the button moves the time rapidly.
TUNER FM: Tunes in to the specified preset FM station.
TUNER AM: Tunes in to the specified preset AM station.
CD:
Plays the specified track on the specified CD.
TAPE:
AUX IN:
Plays a tape in Deck A.
Plays an external source.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the ¢ or 4 button to select the preset station
number, then press the SET button.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until the “DAILY” appears on the
display.
1
When selecting CD :
Press the ¢ or 4 button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as fol-
lows:
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“DAILY” indicator go out.
2
DISC – =DISC 1 =DISC 2 =DISC 3 =(back to the be-
ginning)
• If no disc number is specified, playback will start from the
first track of the currently selected disc.
When selecting TAPE:
To activate the cancelled Daily Timer:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
Press the CLOCK/TIMER button on the Unit
1
repeatedly until the “DAILY” appears on the
display.
To allow this, the equipment should have the timer function.
The “DAILY” indicator blinks and the Timer indicator (
lights up on the dispaly.
)
Setting the volume level.
Press the ¢or 4button to select the volume level.
VOL – – : When the volume level is under 18: The current vol-
ume level will be used.
When the volume level is over 19: The volume level is auto-
matically set to 18.
5
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “DAILY” indicator remain lit, and the display returns to
the original display.
2
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
Press the SET button.
6
7
Setting the REC (Recording)
Timer
The timer setting is completed and the display returns to the
display before you set the Timer.
Press the
STANDBY/ON button to turn
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
off the System, if necessary.
The Timer indicator ( ) and “DAILY” indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
• You can set the REC Timer whether the System is on or
off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) blinks and “DAILY” indicator lights during
timer operation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator ( ) and “DAILY” indica-
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Using the Unit
Press the
STANDBY/ON button to turn
8
You can set the time in the same way as for setting the Daily Tim-
er.
off the System, if necessary.
The Timer indicator ( ) and “REC” indicator are lit on the
display, showing that the Rec Timer is set to on.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
Press the CLOCK/TIMER button until “ON
TIME” immediately after “REC” appears on
2
When the timer ON-time comes:
• When the timer ON-time comes, the System automatically
turns on. The station you have set is played. The Timer indica-
tor ( ) blinks during timer operation.
To stop timer recording, press the 7button.
• When the timer OFF-time comes, the System automatically turns
off.
the display.
The Timer indicator ( ) lights and the “REC” indicator
blinks.
Each time you press the button, the display changes as follows:
DAILY =ON TIME =REC =ON TIME* =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the REC Timer setting.
Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits blink.
• If the System is already on when the timer ON-time
comes, the REC Timer does not work.
Turning the REC (Recording) Timer On and Off
Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.
To cancel the REC Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
1
Setting the ON time you want the System to
3
turn on.
1. Press the 4or ¢button to set the hour, then press the
SET button.
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“REC” indicator go out.
2
2. Press the 4or ¢button to set the minute, then press the
SET button.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
To activate the cancelled REC Timer:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
1
Setting the OFF time you want the System to
4
turn off.
play.
1. Press the 4or ¢button to set the hour, then press the
The Timer indicator ( ) lights and the “REC” indicator
blinks on the display.
SET button.
2. Press the 4or ¢button to set the minute, then press the
SET button.
The System enters Preset Station Entering mode.
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “REC” indicator remain lit, and the display returns to the
original display.
2
Select the preset station for recording.
5
1. Press the 4or ¢button to set the band (TUNER FM or
TUNER AM), then press the SET button.
2. Press the 4or ¢button to set the preset number, then
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
press the SET button.
Setting the volume level.
6
Press the ¢or 4button to select the volume level.
VOL – – : The current volume level will be used.
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
Press the SET button.
The timer setting is completed and the display returns to the
display before you set the Timer.
7
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Setting the SLEEP Timer
Timer Priority
Use the Sleep Timer to turn the System off after a certain number
of minutes when it is playing. By setting the Sleep Timer, you can
fall asleep to music and know that your System will turn off by it-
self rather than play all night.
Since REC Timer and DAILY Timer can be set independently, you
may wonder what happens if the settings overlap. Here are the pri-
orities for REC Timer and DAILY Timer:
• Timer with the earlier time setting will have the priority.
Timer will not operate when other Timer is operating.
• If other Timer is set to an exact same time as the REC Timer,
the REC Timer will have the priority.
• You can only set the Sleep Timer when the System is on.
Using the Remote Control
During playback a source, press the SLEEP
1
❏ REC Timer and DAILY Timer will not operate when SLEEP
Timer is operating.
button.
The “SLEEP” indicator starts blinking on the display.
Example
Setting
Set the length of time you want the source to
play before shutting off.
Each time you press the SLEEP button, the time length chang-
es as follows:
2
ON
OFF
REC Timer
ON
OFF
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
DAILY Timer
beginning)
21:30
ON
22:00
22:30
OFF
23:00
Operation
Wait for 5 seconds.
The “SLEEP” indicator stops blinking and remains lit, and the
display returns to the original one before setting the Sleep
Timer.
3
REC Timer
The System is now set to turn off after the number of minutes
you have set.
DAILY Timer
To Confirm the Sleep Time:
21:30
22:30
When the SLEEP button on the Remote Control is pressed, the re-
maining sleep time is displayed. Wait until the display returns to
the original display.
Operates only in REC Timer mode.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button on the Remote Control until the “SLEEP”
indicator goes out on the display.
• Turning off the System also cancels the SLEEP Timer.
• When the REC Timer or the DAILY Timer is operating,
SLEEP Timer can not be set.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Care And Maintenance
Handle your CDs and tapes carefully, and they will last a long
time.
Cassette Tapes
• If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of
the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
Compact Discs
• Remove the CD from its case by holding
it at the edges while pressing the case’s
center hole lightly.
• Do not touch the shiny surface of the
CD, or bend the CD.
• Do not touch the tape surface.
• Put the CD back in its case after use to
prevent warping.
• Be careful not to scratch the surface of
the CD when placing it back in the case.
• Avoid exposure to direct sunlight, tem-
perature extremes, and moisture.
• Do not store the tape:
- In dusty places
- In direct sunlight or heat
- In moist areas
- On a TV or speaker
- Near a magnet
• A dirty CD may not play correctly. If a
CD does become dirty, wipe it with a
soft cloth in a straight line from center to
edge.
Cassette Deck
• If the heads, capstans, and pinch-rollers of the Cassette Deck
become dirty, the following will occur:
- Loss of sound quality
- Discontinuous sound
- Fading
- Incomplete erasure
- Difficulty recording
CAUTION:
• Do not use any solvent (for example, conven-
tional record cleaner, spray thinner, benzine,
etc.) to clean a CD.
• Clean the heads, capstans, and pinch-rollers using a cotton
swab moistened with alcohol.
General Notes
In general, you will have the best performance by keeping your
CDs and the mechanism clean.
Pinch-roller
Capstan
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the System’s Top Cover closed when not in use.
Moisture Condensation
Moisture may condense on the lens inside the System in the
following cases:
• After turning on heating in the room.
• In a damp room.
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
Heads
• If the heads become magnetized, the Unit will produce noise or
lose high frequencies.
• To demagnetize the heads, turn off the Unit, and use a head
demagnetizer (available at electronics and record shops).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as
your dealer, for service.
Symptom
Possible Cause
Action
No sound is heard.
•
•
Connections are incorrect, or loose.
Headphones are connected.
•
•
Check all connections and make corrections.
(See pages 4 to 6.)
Disconnect the headphones.
Poor radio reception
•
•
The antenna is disconnected.
The AM Loop Antenna is too close to the Sys-
tem.
The FM Wire Antenna is not properly
extended and positioned.
•
•
Reconnect the antenna securely.
Change the position and direction of the AM
Loop Antenna.
Extend FM Wire Antenna to the best reception
position.
•
•
The disc tray does not open.
•
•
The AC power cord is not plugged in.
Tray is locked.
•
•
Plug the AC power cord.
Unlock the tray. (See page 15.)
The CD skips.
The CD is dirty or scratched.
The CD is upside down.
Clean or replace the CD. (See page 25.)
Put the CD in with the label side up.
Replace the disc.
The CD does not play.
The MP3 disc does not play.
•
•
No MP3 files are recorded on the disc.
MP3 files do not have the file extension —
.MP3, .Mp3, .mP3, or .mp3 in thier file names.
MP3 files are not recorded in the format com-
pliant with ISO 9660 Level 1 or Level 2.
•
The readout time of the MP3 disc is too long.
The readout time varies with the complexity of Do not use too many hierarchies and folders when
the recording configuration.
recording. Also, do not record any other types of au-
dio tracks together with MP3 files. (See page 11.)
The cassette holder cannot be opened.
Unable to record.
During tape playing, the power cord was unplugged. Plug in the power cord, and turn on the System.
Cassette record protect tabs are removed. Cover holes on back edge of cassette with tape.
Unable to operate the Remote Control.
•
•
The path between the Remote Control and the
sensor on the Unit is blocked.
The batteries have lost their charge.
•
•
Remove the obstruction.
Replace the batteries.
Operations are disabled.
The built-in microprocessor has malfunctioned due Unplug the System then plug it back in.
to external electrical interference.
Specification
Amplifier
Unit
Output Power 140 W per channel, min. RMS, driven
Dimensions 270 mm
×
306 mm
×
456 mm (W/H/D)
into 6 Ω at 1kHz, with no more than
10% total harmonic distortion
(IEC 268-3)
Mass Approx. 8.6 kg
Speaker Specifications (each unit)
SP-MXKC4
Input Sensitivity/Impedance (1 kHz)
Type 3-way bass-reflex type
Speaker Unit Woofer: 16 cm cone × 1
Mid:
Tweeter; 2cm dome × 1
Power Handling Capacity 140 W
AUX IN 400 mV/50 kΩ
Speaker terminals 6 Ω - 16 Ω
Phones 32 Ω - 1 kΩ
5cm cone × 1
15 mW/ch output into 32 Ω
Cassette Deck Section
Impedance 6 Ω
Frequency Range 45 Hz - 22 000 Hz
Sound pressure level 87 dB/W·m
Dimensions 266 mm × 333 mm × 241 mm (W/H/D)
Mass Approx. 3.9 kg
Frequency Response
Type I (NORMAL) 63 Hz - 12 500 Hz
Wow And Flutter 0.15% (WRMS)
CD Player
CD Capacity 3 CDs
Accessories
Dynamic Range 85 dB
Signal-To-Noise Ratio 85 dB
Wow And Flutter Unmeasurable
Tuner
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
AC Plug Adaptor (1)
FM Tuner
Power Specifications
Tuning Range 87.5 MHz - 108.0 MHz
(at AM10 kHz channel space)
87.50 MHz - 108.00 MHz
Power Requirements AC 110 V/127 V/220 V/230 V-240 V
adjustable with voltage selector,
,
(at AM9 kHz channel space)
50 Hz/60 Hz
AM Tuner
Power Consumption 140 W (power on mode)
22 W (in Standby mode)
Tuning Range 530 kHz - 1710 kHz (at AM10 kHz
channel space)
531 kHz - 1710 kHz (at AM9 kHz
channel space)
Design and specifications are subject to change without notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and
U.K.)
Instrucción sobre la línea de la red (CA) (no aplicable para Europa, EE.UU., Canadá,
Australia, ni el Grã-Bretanha)
Instrução sobre a tensão da rede eléctrica (CA) (não aplicável para a Europa, os E.U.A.,
o Canadá, a Austrália e o Reino Unido)
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your
mains (AC) line voltage corresponds with the
position of the voltage selector switch provided
on the outside of this equipment and, if differ-
ent, reset the voltage selector switch, to prevent
from a damage or risk of fire/electric shock.
IMPORTANTE para la línea de la red (CA)
ANTES DE ENCHUFAR EL EQUIPO, com-
pruebe si la tensión de la línea de la red (CA)
corresponde con la posición del selector de ten-
sión situado en la parte exterior del equipo, y si
es diferente, reajuste el selector de tensión para
evitar el riesgo de incendios/descargas eléc-
tricas.
IMPORTANTE para a ligação à tensão da
rede (CA)
ANTES DE LIGAR O APARELHO A UMA
TOMADA DA REDE, verifique se a tensão da
rede CA corresponde à posição do seletor de volt-
agem localizado na parte externa deste equipa-
mento. Caso não corresponda, reajuste o seletor
de voltagem a fim de evitar avarias ou riscos de
incêndio e choque elétrico.
Para el residente de Mexico
IMPORTADOR : JVC DE MEXICO, S.A. DE C.V.
AV. INSURGENTES SUR No.670 8º PISO COL.
DEL VALLE, MEXICO, D.F. C.P.03100
Tel. 55 36 82 52 Fax. 56 69 09 43
0205NYMCREBET
EN, SP, PR
© 2005 Vicotr Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
COMPACT COMPONENT SYSTEM
MX-KC4
Consists of CA-MXKC4 and SP-MXKC4
STANDBY/ON
SLEEP
AUX
FM /AM
FM MODE
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
RHYTHM AX MUTING
REMOTE CONTROL
SP-MXKC4
CA-MXKC4
SP-MXKC4
INSTRUCTIONS
LVT1343-003B
[UJ]
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings, Cautions and Others
CAUTION
Caution —
STANDBY/ON button!
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.
Disconnect the mains plug to shut the power off completely (all
lamps and indications go off). The
STANDBY/ON button in any
position does not disconnect the mains line.
• When the unit is on standby, the STANDBY lamp lights red.
• When the unit is turned on, the STANDBY lamp goes off.
The power can be remote controlled.
IMPORTANT FOR LASER PRODUCTS
1. CLASS 1 LASER PRODUCT
2. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
3. CAUTION: Visible and invisible laser radiation when
open and interlock failed or defeated. Avoid direct expo-
sure to beam.
4. REPRODUCTION OF LABEL: CAUTION LABEL,
PLACED INSIDE THE UNIT.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:
1 Front: No obstructions and open spacing.
2 Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.
3 Bottom:
more.
Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or
Front view
Side view
15cm
15cm
15cm
1cm
1cm
15cm
15cm
10cm
CAUTION
1.Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)
2.Do not place any naked flame sources, such as lighted candles, on the apparatus.
3.When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of
these batteries must be followed strictly.
4.Do not expose this apparatus to rain, moisture, dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the apparatus.
G-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the JVC Compact Component System.
We hope it will be a valued addition to your home, giving you years of enjoyment.
Be sure to read this instruction manual carefully before operating your new stereo system.
In it you will find all the information you need to set up and use the system.
If you have a query that is not answered by the manual, please contact your dealer.
Features
Here are some of the things that make your System both powerful and simple to use.
❏ The controls and operations have been redesigned to make them very easy to use, freeing you to just enjoy the
music.
• With JVC’s COMPU PLAY you can turn on the System and automatically start the Radio, Cassette Deck, or
CD Player with a single touch.
❏ The great SEA (Sound Effect Amplifier) effects Rock, Pop and Classics are provided.
❏ The RHYTHM AX provides rich sound even at low sound levels.
❏ A 45-station preset capability (30 FM and 15 AM) in addition to auto-seek and manual tuning.
❏ CD changer function can operate 3 discs.
• Discs can be changed during play using the Carrousel tray (rotational tray).
• Continuous, random or program play of 3 discs.
❏ Two Decks enabling tape dubbing.
❏ Timer functions; Daily Timer, REC (Recording) Timer, and Sleep Timer.
❏ You can connect various external units, such as an MD recorder.
❏ The CD Player can play back a CD-R and CD-RW.
How This Manual Is Organized
• Basic information that is the same for many different functions - e.g. setting the volume - is given in the section “Basic Operations”,
and not repeated under each function.
• The names of buttons/controls and display messages are written in all capital letters: e.g. FM/AM, “NO DISC”.
• If the button names on the Unit and the Remote Control are the same, the description on where the button is used will be omitted.
• System functions are written with an initial capital letter only: e.g. Normal Play.
Use the table of contents to look up specific information you require.
We have enjoyed making this manual for you, and hope it serves you in enjoying the many features built into your System.
IMPORTANT CAUTIONS
Installation of the System
• Select a place which is level, dry and neither too hot nor too cold. (Between 5°C and 35°C.)
• Leave sufficient distance between the System and a TV.
1
• Do not use the System in a place subject to vibrations.
Power cord
• Do not handle the power cord with wet hands!
2
• Some power is always consumed as long as the power cord is connected to the wall outlet.
• When unplugging the System from the wall outlet, always pull the plug, not the power cord.
Malfunctions, etc.
3
• There are no user serviceable parts inside. In case of system failure, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the System.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents..........................................................................................................2
Set the VOLTAGE SELECTOR Switch................................................................................................. 3
Using the Remote Control....................................................................................................................... 4
Connecting the AM Antenna................................................................................................................... 5
Connecting to the Wall Outlet................................................................................................................. 6
COMPU Play........................................................................................................................................... 6
Basic Operations...........................................................................................................7
Turning the Power On and Off................................................................................................................ 7
Fade-out Muting (FADE MUTING)....................................................................................................... 8
Enjoying the Powerful Sound (RHYTHM AX)...................................................................................... 8
Entering the Number with the Remote Control (Numeric Keys)............................................................ 8
Using the Tuner.............................................................................................................9
Using the CD Player....................................................................................................11
Changing the MP3 Playback Mode....................................................................................................... 12
Using the Cassette Deck (Recording) ......................................................................17
Listening to the External Equipment..................................................................................................... 19
Using the Timers .........................................................................................................20
Setting the Daily Timer ......................................................................................................................... 21
Setting the REC (Recording) Timer ...................................................................................................... 22
Setting the SLEEP Timer ...................................................................................................................... 24
Timer Priority ........................................................................................................................................ 24
Care And Maintenance................................................................................................25
Troubleshooting..........................................................................................................26
Specification................................................................................................................26
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Accessories
Make sure that you have all of the following items, which are supplied with the System.
AM Loop Antenna (1)
FM Wire Antenna (1)
Remote Control (1)
Batteries (2)
AC Plug Adaptor (1)
If any of these items are missing, contact your dealer immediately.
Set the VOLTAGE SELECTOR Switch
To avoid damaging the System, set the voltage before plugging in the System.
Set the correct voltage for you area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector so
the number the voltage mark is pointed at is the same as the voltage.
Voltage mark
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
How To Put Batteries In the Remote Control
Match the polarity (+ and –) on the batteries with the + and – markings in the battery compartment.
R6P(SUM-3)/AA(15F)
CAUTION:
• Handle batteries properly.
❏ To avoid battery leakage or explosion:
• Remove batteries when the Remote Control will not be used for a long time.
• When you need to replace the batteries, replace both batteries at the same time with new ones.
• Do not use an old battery with a new one.
• Do not use different types of batteries together.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
Remote sensor
CAUTION:
• Make all connections before plugging the System into an AC power outlet.
Connecting the FM Antenna
Using the Supplied Wire Antenna
FM wire antenna (supplied)
Extend the supplied FM Wire
Antenna horizontally.
Strip vinyl shield from cut
line, twist wire core.
Using an FM 75-Ohm Antenna Cable (not Supplied)
If reception is poor, connect the outside antenna.
Outdoor FM antenna cable (not supplied)
• Before attaching a 75 ohm coaxial lead (the kind with a round wire going to an outdoor antenna), disconnect the supplied
FM Wire Antenna.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting the AM Antenna
Rear Panel of the Unit
AM antenna wire (not supplied)
If reception is poor, connect the
outside antenna.
Turn the loop until you have
the best reception.
AM loop antenna (Supplied)
Attach the AM loop to its base by
snapping the tabs on the loop
into the slot in the base.
• Even when connecting an outside AM antenna, keep the indoor AM loop connected.
CAUTION:
• To avoid noise, keep antennas away from the System, the connecting cord and the AC power cord.
Connecting the Speakers
Connect the right speaker to the RIGHT speaker terminals and the left speaker to the LEFT speaker terminals. “Right” / “Left” is labeled
on the rear of the speaker.
1. Open each of the terminals to connect the speaker wire leads.
2. Connect the speaker cords to the Speaker terminals of the Unit.
Connect the gray (+) and gray with black stripe (–) cords of the right side speaker to the red (+) and black (–) terminals marked RIGHT
on the System.
Connect the gray (+) and gray with black stripe (–) cords of the left side speaker to the red (+) and black (–) terminals marked LEFT on
the System.
3. Close each of the terminals.
Right side (rear view)
Left side (rear view)
Gray
Gray
Gray
Gray
with
with
black
stripe
black
stripe
CAUTIONS:
• A TV may display irregular colors if located near the speakers. If this happens, set the speakers away
from the TV.
• Use speakers with the correct impedance only. The correct impedance is indicated on the rear panel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Connecting External Equipment
Connect a signal cord with stereo mini plugs (not supplied) between the System’s AUX jack on the front panel and the audio output jack
or output terminals of the external portable CD, MD player, STB, etc.
You can then listen to the external source through the System.
Signal cord (not supplied)
White
Lch
Rch
To audio output of
external equipment.
Red
Connecting to the Wall Outlet
Plug the AC power cord into the wall outlet.
Now, your System is at your command!
DEMO Mode
When the System is connected to the wall outlet, a DEMO mode displaying some of the system’s features automatically starts.
To turn the DEMO display off, press any of the operation buttons. The DEMO display automatically stops.
To turn the DEMO display on, press the DEMO button on the Unit for more than 2 seconds.
CANCEL/DEMO
(For 2 seconds)
• While the System is turned on, the DEMO display will automatically starts if no operation is made for 2 minutes. To cancel
this auto DEMO display function, press the CANCEL button on the Unit during DEMO display.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, a tape, turn on the radio, or listen to an external equipment with a single press of the play
button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If the System is not
ready (no CD or tape in place), the System still powers on so you can insert a CD or tape.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Unit
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
CD Open/Close 0button
On the Remote Control
CD 6button
FM/AM button
TAPE A 3, TAPE B 3buttons
AUX button
CD1, CD2 and CD 3 buttons
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
)
STANDBY/ON
STANDBY/ON
SLEEP
Display
Numeric
AUX
RHYTHM AX
indicator
keys
FM /AM
FM MODE
SOUND MODE
VOLUME
RHYTHM AX
STANDBY/ON
CD
CD1
CD2
CD3
PHONES
STANDBY indicator
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
SOUND
MODE
FADE
MUTING
VOLUME +, –
RHYTHM AX
FADE MUTING
RHYTHM
AX
REMOTE CONTROL
Various information
Sound Mode indicator
Level bar
Status bar (Indicates various statuses.)
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
• To switch off the System completely, unplug the AC power
cord from the wall outlet. When you unplug the AC power
cord, the clock will be reset to 0:00 immediately.
Turning the Power On and Off
Turning the System On
Adjusting the Volume
Press the
STANDBY/ON button.
1
Turn the VOLUME control on the Unit clockwise to increase the
volume or turn it counterclockwise to decrease the volume.
Press the VOLUME + button on the Remote Control to increase
the volume or press the VOLUME – button on the Remote Control
to decrease the volume.
STANDBY/ON
or
The display comes on and “POWER ON” is displayed once.
The STANDBY indicator goes out.
The System comes on ready to continue in the mode it was in
when the power was last turned off.
You can set the volume level to MIN, 1-31, or MAX.
• For example, if the last thing you were doing was listening
to a CD, you are now ready to listen to a CD again. If you
wish, you can change to another source.
• If you were listening to the Tuner last, the Tuner comes on
playing the station it was last set to.
• When you turn the power off at a volume level of over 19,
the volume level is automatically set to 18 when the power
is turned back on.
Turning the System Off
Press the
STANDBY/ON button again.
CAUTION:
1
STANDBY/ON
• DO NOT turn on the System and/or start playing
any source without first setting the VOLUME
control to minimum, as a sudden blast of sound
could damage your hearing, speakers and/or
headphones.
or
“GOOD BYE” is displayed and the display goes out, except
for the clock display. The STANDBY indicator lights up. (The
display is dimmed.)
• Some power is always consumed even though power is
turned off (called Standby mode).
For private listening
Connect a pair of headphones to the PHONES jack. No sound
comes out of the speakers.
Be sure to turn down the volume before connecting or putting on
headphones.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Fade-out Muting (FADE MUTING)
Entering the Number with the
Remote Control (Numeric Keys)
You can mute the output with one touch operation.
You will use the number keys on the Remote Control to enter num-
bers for presetting stations, recalling the preset stations, or pro-
gramming the playing tracks on CDs.
To muting the output, press the FADE MUTING button on the
Remote Control. The output is faded out.
To release muting, press the FADE MUTING button once
again. The output is faded in to the previous level.
How to enter the number with the number keys is explained here.
Examples:
• To enter number 5, press 5.
• To enter number 15, press +10, then 5.
• To enter number 20, press +10, then 10.
• To enter number 25, press +10, +10, then 5.
• After Fade-out Muting, turning the VOLUME control on the
unit or pressing the VOLUME button on the Remote Control
will increase the volume from the previous level.
Enjoying the Powerful Sound
(RHYTHM AX)
Using RHYTHM AX, harder-hitting beats intensify your listening
experience even at low sound levels.
RHYTHM AX also works even when the song has no “beat,” such
as classical music, so that you can listen to the rich sound even at
low sound levels.
This function only affects the playback sound, not your recording.
Press down the RHYTHM AX control.
“RHYTHM AX” appears and the display return to
the Music Source Selecting mode.
• Each time you press down the control, RHYTHM
AX turns on and off alternately.
• The RHYTHM AX lamp also lights up.
When using the remote control, press RHYTHM AX.
• Each time you press the button, RHYTHM AX turns on and off
alternately.
• Each time you turn the RHYTHM AX on or off, you will hear
a gap in the playback.
Selecting the Sound Mode
(SOUND MODE)
You can select one of 3 SEA (Sound Effect Amplifier) modes.
You can use this effect only for playback.
To get the effect, press the SOUND MODE button until Sound
Mode you want appears on the display.
The “SOUND MODE” indicator lights up in the display.
Each time you press the button, the Sound Mode changes as fol-
lows:
ROCK
=
POP
=
CLASSIC
=
FLAT
=
(back to the beginning)
To cancel the effect, press the SOUND MODE button until
“FLAT” appears on the display.
The “SOUND MODE” indicator goes off.
ROCK
Boosts low and high frequencies. Good for
acoustic music.
POP
CLASSIC
Good for vocal music.
Set for wide and dynamic sound stereo
systems.
FLAT
No sound effect applies.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
STANDBY/ON
SLEEP
Numeric
AUX
keys
FM /AM
FM MODE
FM/AM
SET
FM MODE
FM/AM
1
Á
7
CD
CD1
CD2
CD3
1
Á
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Band display, Frequency display, Preset channel
FM mode indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
You can listen to FM and AM stations. Stations can be tuned in
manually, automatically, or from preset memory storage.
Tuning In a Station
❏ Before listening to the radio:
• Make sure that both the FM and AM antennas are correctly
connected. (See pages 4 and 5.)
Press the FM/AM button.
1
The Band and Frequency you were last tuned to appear on the
display.
Setting the AM Tuner Interval Spacing
When shipped, the AM tuner interval is set to 9 kHz spacing (50
kHz spacing for FM broadcast). You can change it to 10 kHz spac-
ing.
(If the last station was selected using the preset number, the
preset number appears first.)
Each time you press the button, the band alternates between
FM and AM.
To select 10 kHz intervals, press the 7button on the Remote
Control for more than 2 seconds in Standby mode, “AM-9” ap-
pears on the display, then press the 10 button on the Remote Con-
trol (at the same time, the 100kHz spacing is selected for FM
broadcast).
FM /AM
or
on the Unit on the Remote Control
To select 9 kHz intervals again, press the 7button on the Re-
mote Control for more than 2 seconds in Standby mode, “AM-10”
appears on the display, then press the 9 button on the Remote Con-
trol.
One Touch Radio
Just press the FM/AM button to turn on the System and start play-
ing the station you were last tuned to.
❏ You can switch from any other sound source to the radio by
pressing the FM/AM button.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Tuner
Using the Unit
Select a station using one of the following
2
methods.
Select a band by pressing the FM/AM button.
1
2
• Manual Tuning
Press the
tion.
or
button to tune in a sta-
22 Á
Briefly press the 22or
Á
button to move from frequency
to frequency until you find the station you want.
OR
• Auto Tuning
If you hold down the 22 or Á button for 1 second or
more and then release it, the frequency changes down, or up,
automatically until a station is found.
OR
Press the SET button.
3
4
“SET” will blink for 5 seconds.
While “SET” is blinking, press the
4
or
¢
button to select the preset number.
¢: Increases the preset number by 1.
4: Decreases the preset number by 1.
• Preset Tuning (Possible only after presetting sta-
tions)
Preset tuning using the Unit:
Select the preset number you want, using the 4 or ¢
button.
Press the SET button.
5
6
“STORED” appears and, after 2 seconds, the display returns to
the band/frequency display.
Example:
Repeat above steps 2 to 5 for each station
you want to store in memory with a preset
number.
Press the ¢ button until the preset number “P12” appears
on the display. Then, the display will show the preset
number’s band and frequency.
To change the preset stations, repeat the same steps as
above.
• In step 4, you can select the preset number using the nu-
meric keys on the Remote Control. See “Entering the
Number with the Remote Control” on page 8.
Preset tuning using the Remote Control:
Enter the preset number you want to recall using the numer-
ic keys. See “Entering the Number with the Remote Con-
trol” on page 8.
CAUTION:
Example:
• Even if the System is unplugged or if the power
failure occurs, the preset stations will be stored
for a few days. However, in case the preset sta-
tions are erased, you will need to preset the sta-
tions again.
Press +10, then 2 to recall the preset number 12. Then, the
display will show the preset number’s band and frequency.
• In AM broadcast, reception sensitivity will be changed by
turning the AM loop antenna. Turn the AM loop antenna
for best reception.
To Change the FM Reception
Mode
Presetting Stations
When you are tuned in to an FM stereo broadcast, the “ST (Ster-
eo)” indicator lights up and you can hear stereo effects.
If an FM stereo broadcast is hard to receive or noisy, you can select
Monaural mode. Reception improves, but you lose stereo effect.
You can preset up to 30 FM stations and up to 15 AM stations.
Press the FM MODE button on the Remote Control so
that the “MONO” indicator lights up on the display.
• Preset numbers may have been set to factory test fre-
quencies prior to shipment. This is not a malfunction. You
can preset the stations you want into memory by following
one of the presetting methods below.
• During presetting stations, if no button operation is made
for 5 seconds, the display returns to the band/frequency
display. In this case, repeat steps from the beginning.
FM MODE
ST
MONO
To restore the stereo effect, press the FM MODE button on
the Remote Control so that the “MONO” indicator goes off.
Selecting other station will also cancel the FM Mono mode and re-
store the stereo effect.
TUNING
or
SET
PRESET
or
SET
FM=30, AM=15
When changing the Band
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
REPEAT
PROGRAM
STANDBY/ON
RANDOM
CD Open/
Close 0
Numeric
SLEEP
keys
AUX
DISC SKIP
CD 6
FM /AM
FM MODE
SET
4
¢
CANCEL
CD1-CD3
7
CD1-CD3
CD
CD1
CD2
CD3
CD 6
1
¢
4
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
Á
7
REPEAT
PROGRAM
/RANDOM
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Program indicator
Track number, Playing time, Program number, etc.
MP3 indicator
Disc indicators
Random Repeat
indicator indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
This unit has been designed to playback the following CDs:
• Audio CD
• CD-R (CD-Recordable)
• CD-RW (CD-ReWritable)
More about MP3 discs
• MP3 disc (MP3 files recorded on a CD-R or CD-RW)*
• MP3 discs (either CD-R or CD-RW) require a longer read-
out time. (It varies due to the complexity of the recording
configuration.)
• When making an MP3 disc, select ISO 9660 Level 1 or
Level 2 as the disc format.
• This unit does not support multisession recording.
• This unit can play MP3 files only with the following file ex-
tensions— “.MP3,” “.Mp3,” “.mP3,” and “.mp3.”
• Non-MP3 files are ignored. If non-MP3 files are recorded
together with MP3 files, this unit will take a longer time to
scan the disc. It may also cause the unit to malfunction.
• Some MP3 discs may not be played back because of
their disc characteristics or recorded conditions.
Only CDs bearing these marks can be
used with this System. However, con-
tinued use of irregular shape CDs
(heart-shape, octagonal, etc.) can dam-
age the System.
Recordable
ReWritable
When playing a CD-R or CD-RW
• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWri-
table) can be played back when they are already “finalized.”
• Before playing back CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on this unit
because of their disc characteristics, damage or stain on them,
or if the player’s lens is dirty.
• CD-RWs may require a longer readout time since the reflect-
ance of CD-RWs is lower than for regular CDs.
Caution for DualDisc playback
The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be recom-
mended.
*For MP3 discs
• This unit manages files and folders on MP3 discs as “tracks”
and “albums.”
• Playback order of the MP3 files (tracks) recorded on a disc are
determined by the writing (or encoding) application; therefore,
playback order may be different from the one you have
intended while recording the files and the folders.
• This unit shows the file (track) names and ID3v2 tags (only
“Title”, “Artist” and “Album”) on the display after starts play;
however, there is a limitation on available characters and some
file names and ID3 tags are not shown correctly.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
❏ When you use an 8 cm CD, place it on the inner circle of the tray.
About Disc Indicator:
❏ You can load CDs while listening to the other source or while
listening to the CD being played back.
Disc Rotation
indicator
Disc Number
indicator
❏ When power is turned off with the tray opened, the tray is auto-
matically closed.
Selected Disc
indicator
❏ If the CD cannot be read correctly (because it is scratched, for
example), “ NO DISC” appears on the display.
The Disc indicator consists of the following three kinds of indica-
tors:
To Unload CDs
Disc Number indicator: Lights all the time.
Selected Disc indicator:Lights for the currently selected
disc number.
Disc Rotation indicator:Runs when the selected CD is
playing or paused. This indicator
Take out the CD as shown below.
While the CD Player is stopped, press the CD
1
0
Open/Close
tray.
button on the Unit to open the
goes out if a CD is not loaded for
the selected disc number.
Remove the CD, then press the DISC SKIP
button on the Unit.
The tray turns for the next CD.
2
One Touch Play
The power comes on, and operations are done automatically.
Repeat step 2 to remove all the CDs.
3
4
❏ By pressing the CD 6button, the System will come on, and if
a CD is loaded for the disc number that was lastly selected, it
will start playing from the first track.
0
Press the CD Open/Close
Unit to close the tray.
button on the
❏ By pressing the CD1-CD3 button, the System will come on, and
if a CD is already loaded for the selected disc number, it will
start play from the first track.
❏ You can remove CDs while listening to the other source.
Tips:
• Removing/changing the CDs during playback
While playing back a CD (e.g. CD1), you can remove or change
the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close
0 button. After removing or changing, press the same button to
close the tray.
To Load CDs
0
Press the CD Open/Close
Unit to open the tray.
button on the
1
2
Changing the MP3 Playback Mode
Place one or two CDs, with its label side up,
onto the tray.
Be sure that the CD is securely seated inside the recess on the
disc tray.
When playing an MP3 disc, you can choose the playback mode of
the MP3 disc as follows:
TRACK mode:
The unit recognizes only tracks (files). You can play an MP3 disc
like an Audio CD.
With the label side up
GROUP mode:
The unit recognizes tracks (files) and albums (folders) on an MP3
disc. You can play an MP3 disc according to the way how they are
grouped.
On the remote control ONLY:
Press MP3 before or during playing an MP3 disc.
GROUP indicator appears when the MP3
playback mode is the GROUP mode.
Press the DISC SKIP button on the Unit and
place the next CD.
When you press the button, the tray turns for the next CD.
3
4
• Each time you press the button, the MP3 playback mode
changes between “GROUP” and “TRACK” alternately.
0
Press the CD Open/Close
Unit.
The tray is closed.
button on the
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
GROUP mode
Basics of Using the CD Player-
Normal Play
Total track number
To Play CDs
Total group number
To pause, press the CD 6button. The playing time indication
blinks on the display.
Load CDs.
1
2
To cancel pause, press the CD 6button again. Play continues
Press one of the Disc button (CD1-CD3) you
want to play.
The selected disc number (e.g. “CD DISC 1”) appears on the
display.
The first track of the selected CD begins playing. When the
first CD finishes playing, the next and the third CDs are con-
tinuously played back.
When the last CD has finished playing, the CD Player auto-
matically stops.
from the point where it was paused.
Tips:
• Playing back the CD using the DISC SKIP button
You can also play the CDs using the DISC SKIP button. During
playback, each time you press the button, the next CD is automat-
ically played back. If the next disc tray is empty, the disc tray is
automatically skipped.
To Select a Track
❏ You can start to play the currently selected disc by simply press-
ing the CD 6button.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the track you want to
play, except for MP3 group mode.
By pressing the button, you can skip to the next track or skip back
to the previous track.
While playing the CD, the following will appear on the display.
For Audio CD
• The selected track starts playing.
CD is
playing
• Press the ¢ button once to skip to the beginning of the next
track.
Track number Elapsed playing time
• Press the 4 button to skip to the beginning of the current
track. Press twice quickly to skip to the beginning of the previ-
ous track.
For MP3 disc
TRACK mode
In Stop mode (using the 4or ¢button):
By briefly pressing the 4or ¢button, the CD Player operates
in the same way as during playback, except for MP3 group mode.
Track number
Using the numeric keys on the Remote Control:
Using the numeric keys, you can directly select the track on the
currently selected CD.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
• The selected track starts playing.
For example, press +10, then 5 to play back the track number 15.
See “Entering the Number with the Remote Control” on page 8.
In MP3 group mode:
GROUP mode
The selected track of the current group starts playing.
Tips:
• For MP3 discs
Track number of the current group
When the selected track starts playing, information of that track
scrolls on the display, in the order of file name, title, artist, and al-
bum.
In the STOP mode, the file name (TRACK mode), the group name
and the file name (GROUP mode) scroll on the display.
• After the display above is shown, if the tracks include ID3
tags, the display will scroll in the order of file name, title, art-
ist, and album, then returns to the original display.
When the Disc button (CD1-CD3) is pressed with the tray opened,
the tray is closed and the selected CD automatically begins play-
ing.
To Select a Group (For MP3 GROUP mode only)
To stop playing the CD, press the 7button. The following in-
formation for the CD is displayed.
During playback (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play.
For Audio CD
• The first track of the selected group starts playing.
In Stop mode (using the 4or ¢button):
Briefly press the 4or ¢button to select the group you want
to play. The group number, the group name and the file name scroll
on the display.
Total playing time
Total track number
For MP3 disc
TRACK mode
Search Play
Holding down the following buttons, during playback, will fast
forward/backwards the CD so you can quickly find a particular
passage in the track you are listening to.
Total track number
• 22or Ábutton on the Unit
• 4or ¢button on the Remote Control
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Using the Remote Control
Press the numeric keys to directly enter the track number. Then,
the program order number will be assigned from P-1.
• To delete the current program step, press the CANCEL button
on the Unit.
Programming the Playing Order
of the Tracks
You can program the playing order of the tracks on all the CDs. Note
that you can only make a program when the CD Player is stopped.
Repeat steps 3 and 4 to program other tracks
on the same CD or the other CD.
5
❏ You can program up to 32 tracks in any desired order including
the same tracks.
6
To play the program, Press the CD
ton.
but-
6
For details, see “To Play the Program You Have Made” men-
tioned below.
For MP3 discs
• If you try to select a MP3 disc that has once been read or
played, “MP3 DISC” appears on the display and it can not
be programmed.
• MP3 disc that has not ever been read can be selected in
a program mode. But when playback starts, “MP3 DISC”
appears on the display, the program is deleted and
switched to a next program.
To confirm the programmed contents, while the CD player
is stopped, select Program mode by pressing the PROGRAM but-
ton and press the 4or ¢button on the Remote Control.
To delete all the tracks in the program, while the CD Player
is stopped, press the 7button or open the tray by pressing the CD
Open/Close 0button.
To Modify the Program, while the CD Player is stopped and the
program mode is selected, press the CANCEL button, the last track
in the program is deleted. To add new tracks to the end of the pro-
gram, repeat above steps 3 and 4.
To Make a Program
Load CDs.
1
In Stop mode, set the CD Player in Program
2
Play mode.
• If you try to program a track number that does not exists
on the CD, your entry will be ignored.
• If you try to program the 33rd track, “FULL” appears on
the display.
On the Unit
Press the PROGRAM button to light the “PRGM” indicator on the
display.
At the same time, “PROGRAM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until “PROGRAM” ap-
pears on the display.
The “PRGM” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If a program is already made, the last step of the program will
be displayed.
To Play the Program You Have Made
Press the CD 6button.
The System plays the tracks in the order you have programmed
them.
• To use Repeat Play for Program Play, press the REPEAT but-
ton to select “REPEAT” before starting playback. For details,
see “Repeating Tracks” on page 15.
❏ You can skip to a particular program track by pressing the 4
or ¢button during Program Play.
Press one of the Disc button (CD1-CD3) to
select the CD you want to program.
The display will change to the Program Entry display.
3
❏ To stop playing, press the 7button once. If you press the 7but-
ton, while the CD Player is stopped, the program is deleted.
CD1
To Exit and Re-enter Program Play
or
The program you have made is stored in memory. So, you can exit
Program Play temporarily or re-enter Program Play unless you de-
lete the program.
To exit the program mode once, press the 7 button to stop
playing. The “PROG” indicator goes off and the Program mode
will be canceled. The program is stored in the memory.
To re-enter Program Play mode, press the PROGRAM or
PROGRAM/RANDOM button until the “PRGM” indicator lights
up again.
Disc number Track number
Select the track you want to program.
4
Using the Unit
While the display is blinking, press the
Unit to select the track, then press the SET button within 5 seconds.
The program order number will be assigned from P-1.
4
or
¢
button on the
• When the power is turned off (standby mode), the pro-
grammed tracks are deleted.
• Tray will not open during the program playback.
Disc number Track number
Program order number
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD Player
Random Play
Tray Lock Function
The tracks of the selected CD will play in no special order when
you use this mode.
In order to safely keep the CD in the CD Player, the tray can be
electronically locked.
When the electronic lock is on, the tray cannot be opened even if
the CD Open/Close 0button on the Unit is pressed.
In Stop mode, set the CD Player in Random
1
Play mode.
On the Unit
Locking the Tray
Press the RANDOM button to light the “RNDM” and “1 DISC”
indicator.
At the same time, “RANDOM” appears on the display.
On the Remote Control
Press the PROGRAM/RANDOM button until the “RANDOM”
appears on the display.
Turn on the System and enter CD mode.
1
2
While pressing down the 7button, press the
0
CD Open/Close
button on the Unit.
“LOCKED” appears on the display.
The “RNDM” and “1 DISC” indicator also lights up on the display.
Each time you press the button, the display changes as follows:
PROGRAM =RANDOM =Normal display (Normal Play) =
(back to the beginning)
• If you try to open the tray by pressing the CD Open/Close 0
button, “LOCKED” appears on the display to let you know that
the tray has been locked.
6
Press the CD
button.
2
The tracks on all the CDs are played in random order.
To stop playing, press the 7button. The Random mode is can-
celed and the “RNDM” and “1 DISC” indicator goes off.
To skip a track during playback, press the ¢ button to
jump to the next track in the random sequence.
Unlocking the Tray
Repeat above steps 1 and 2.
“UNLOCKED” appears on the display.
Repeating Tracks
You can repeat all tracks or individual track, as many times as you
like.
Now, you can use the tray normally.
Press the REPEAT button.
The Repeat indicator changes with each press of the button, as fol-
lows:
• Even after the System is unplugged, the tray lock condi-
tion will be retained for a few days. To unlock the tray after
powering up, you need to perform the unlocking opera-
tion.
REPEAT ALL=REPEAT 1DISC=REPEAT 1=Blank display
=(back to the beginning)
REPEAT ALL: In Normal Play mode, repeats all the tracks on
all the CDs.
REPEAT 1DISC:Repeats all tracks on one CD. (Selectable in
Normal Play only)
REPEAT 1:
Repeats one track.
In Program Play mode, the Repeat indicator changes with each
press of the REPEAT button, as follows:
REPEATïBlank display
It repeats all the tracks in the program.
To stop playing, press the 7button. Changing the source to the
other (e.g. Tuner) will also stop playing. The Repeat mode is can-
celed and the Repeat indicator goes off.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Listening to a Tape)
STANDBY/ON
SLEEP
TAPE A 3
AUX
TAPE B 3
FM /AM
7
4
¢
FM MODE
CD
CD1
CD2
CD3
22
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
TAPE B 3
TAPE A 3
A
TAPE
B
(Deck B)
(Deck A)
Á
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
The Cassette Deck allows you to play, record, and dub audio tapes.
Close the cassette holder gently.
3
4
❏ Listening to type I tape is suitable for this Cassette Deck.
When both Deck A and Deck B contain a tape, the last deck to
have a tape inserted is selected.
The use of tapes longer than 120minutes (including
120 minute tapes) is not recommended, since char-
acteristic deterioration may occur and these tapes
easily jam in the pinch-rollers and the capstans.
3
3
Press the TAPE A
or TAPE B
button.
The selected Deck appears (for example, TAPE-A) and the
Deck indicator “A” or “B” lights up on the display.
The Tape indicator (3) blinks on the display and the tape is
played back.
One Touch Play
The Cassette Deck automatically stops when one side of the
tape has finished playing.
By pressing the TAPE A
3
or TAPE B
3
button, the System will
come on, and if a tape is in the deck, it will start to play. If no tape
is loaded, “NO TAPE” appears on the display, the System will
come on and wait for you to insert a tape, or select another function.
To stop playing, press the 7button.
To remove the tape, stop the tape, and press the 0 PUSH
OPEN part to open the Cassette Holder.
To Fast-Wind a Tape
Playing a Tape
During playback or in Stop mode, press the Á(FF) button on the
Unit to fast-wind the tape onto the right side of the cassette without
playing. (You can also use the ¢button on the Remote Control.)
During playback or in Stop mode, press the 22(REW) button on
the Unit to fast-wind the tape onto the left side of the cassette with-
out playing. (You can also use the 4button on the Remote Con-
trol.)
You can use either Deck A or Deck B at a time for playback.
0
Press the
you want to use.
PUSH OPEN part for the deck
1
2
When the cassette holder opens, put a cas-
sette in, with the exposed part of the tape
During fast-winding the tape, the Tape indicator (3) goes out.
During fast-winding, the status bar illumination at the bottom of
the display moves counterclockwise.
During rewinding, it moves clockwise.
• The Cassette Deck automatically stops when one side of the
tape has finished playing.
down, toward the base of the Unit.
The tape will travel from the left to right.
❏ During fast-winding the tape, you can change the tape travelling
direction by pressing the Á(FF) or 22(REW) button.
Tape travelling direction
• If the cassette holder does not open, turn the System off,
then back on and press the 0PUSH OPEN part again.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
STANDBY/ON
REC START/STOP
SLEEP
CD REC START
AUX
PROGRAM
DUBBING
FM /AM
FM MODE
7
TAPE B 3
TAPE A 3
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
0PUSH OPEN
0PUSH OPEN
A
TAPE
B
(Deck A)
(Deck B)
TAPE A 3
TAPE B 3
7
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
3: Tape indicator
Deck indicators
REC indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Recording onto a cassette from any of the sound sources is simple.
Just place a tape in Deck B, have the source ready, make one or
two settings, and you’re ready to record. For each source, the pro-
cedure is a little bit different so we explain each separately. But
first, here are a few things to make your recordings better.
• At the start and end of cassette tapes, there is leader tape
which cannot be recorded onto. Thus, when recording
CDs, radio broadcasts, etc., wind on the leader tape first
to ensure getting the beginning of the recording.
Things To Know Before You Start Recording
❏ It may be unlawful to record or playback copyright ma-
terial without the consent of the copyright owner.
CAUTION:
❏ The recording level, which is the volume at which the new tape
is being made, is automatically set correctly, so it is not affected
by the VOLUME Control on the System. Also, it is not affected
by adjusting the sound effects. Thus, during recording, you can
adjust the sound you are actually listening to without affecting
the recording level.
• If a recording you make has excessive noise or
static, the Unit may have been too close to a TV
which was on during the recording. Either turn
off the TV or increase the distance between the
TV and the Unit.
❏ Two small tabs on the back of the cassette tape, one for side A
and one for side B, can be removed to prevent accidental erasure
or recording.
Adhesive tape
❏ To record on a cassette with the tabs removed, you must cover
the holes with adhesive tape first.
❏ Type I tape can be used for recording.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Cassette Deck (Recording)
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
Press the CD REC START button on the Unit.
“CD REC” appears on the display and the “REC” indicator
lights up. Then, the System begins CD Synchro Recording and
the tracks on the CD are recorded on the tape.
When recording of the tracks of all CDs is finished, the CD
Player and Cassette Deck stop.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
• After the CD Player has played the entire CD or all the pro-
grammed tracks, the tape automatically stops.
2
3
Standard Recording
This is the basic method for recording any source. The System also
has special ways for recording CD to tape, and tape to tape, which
save you time and effort, as well as give you some special effects.
However, when you need to add a selection to a tape you have
made, or are combining selections from several sources on one
tape, use the method described below; just substitute the source
you want into this procedure, such as a tape in Deck A, a CD, or
the Tuner. You can also record from an external equipment with
this procedure.
To Record Any Sound Source to Tape
Follow these steps to record from any sound source onto a tape in
Deck B.
To stop at any time during the recording process, press
the 7button. The CD Player and Cassette Deck stop.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
• When making SLEEP timer settings while doing CD Syn-
chro recording, set enough time to allow for the CD to fin-
ish playing, otherwise the power will go off before
recording is completed.
Tape to Tape Recording (DUB-
BING)
Tape travelling direction
Prepare the source, by, for example, tuning
in a radio station, loading CDs, or turning on
connected equipment.
• For CD recording, see “CD Synchro Recording” mentioned
below.
2
Recording from one tape to another is called dubbing.
You can dub tapes simply, with just a single button.
Press the TAPE A 3 button, and then press
the 7button.
Insert the source cassette you want to copy
from into Deck A for playback.
1
2
3
4
• For dubbing, see “Tape to Tape Recording (DUBBING)”
described below.
Press the REC START/STOP button on the
3
Unit.
Insert a blank or erasable cassette you want
to copy onto into Deck B for recording.
The “REC” indicator lights up and the System begins record-
ing.
The Tape indicator (3) blinks on the display.
• If the tab of the cassette tape on the Deck B is removed to
prevent erasure or recording, “NO REC” will appear on the
display.
Press the DUBBING button on the Unit.
Deck A and Deck B will start simultaneously and the “REC”
indicator lights up.
During dubbing, the Deck indicators “A” and “B” light up al-
ternately.
To stop during recording, press the REC START/STOP but-
ton on the Unit, or press the 7button.
• If no tape is inserted into Deck A, “NO TAPE” will appear
on the display.
• If no tape is inserted into Deck B, “NO TAPE” will appear
on the display.
Recording an AM Station to Tape (Beat Cut)
When recording an AM broadcast, beats may be produced which are
not heard when listening to the broadcast. If this happens, press the
FM MODE button on the Remote Control to eliminate the beats.
To stop dubbing, press the REC START/STOP button on the
Unit or the 7button.
Set to AM station and start recording.
1
2
Press the FM MODE button on the Remote
Control to eliminate the beats.
Each time you press the button, the display changes as shown
below:
• During dubbing, you can hear sound effects through the
speakers or headphones. However, the sound is dubbed
without sound effects.
BEAT 1 ïBEAT 2
CD Synchro Recording
Everything on the CD goes onto the tape in the order it is on the
CD, or according to the order you have set in a program.
Prepare CDs. (See page 12.)
1
Press the CD1-3 button (that you want to make recording), and
then press the 7button.
• If you want to record specific tracks only, you need to pro-
gram the tracks beforehand. (See page 14.)
• If you want to record one CD only, you need to load one
CD only.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an External Equipment
STANDBY/ON
SLEEP
AUX
AUX
FM /AM
FM MODE
AUX
CD
CD1
CD2
CD3
AUX jack
REPEAT PROGRAM/RANDOM
TAPE
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
Listening to the External
Equipment
You can listen to the external equipment such as portable CD, MD
player, STB, or other auxiliary.
❏ First, make sure that the external equipment is properly connect-
ed to the System. (See page 6.)
Set the volume level to the minimum posi-
tion.
1
Press the AUX button.
“AUX IN” appears on the display.
2
Start playing the external equipment.
3
4
Adjust the volume level to the level you want
listen to.
Apply the following sound effects, if you
5
wish.
• RHYTHM AX (See page 8.)
• Sound Mode (See page 8.)
• For operation of the external equipment, refer to its In-
structions.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
STANDBY/ON
SLEEP
SLEEP
AUX
FM /AM
FM MODE
CLOCK/TIMER
SET
CD
CD1
CD2
CD3
REPEAT PROGRAM/RANDOM
TAPE
¢
4
A
TAPE
B
SOUND
MODE
VOLUME
FADE
MUTING
RHYTHM AX
REMOTE CONTROL
DAILY Timer indicator
SLEEP indicator
REC (Recording) Timer indicator
Timer indicator
* When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Three types of timers are available:
DAILY Timer
Fixing the Clock
Use this timer to set wake up everyday to music from any
source, instead of an alarm clock.
Using the Unit
REC (Recording) Timer
Unattended recording of radio broadcasts. You can set the
starting time and ending time.
SLEEP Timer
Fall asleep and have your System turn off automatically after
a certain length of time.
Press the
on the System.
STANDBY/ON button to turn
1
Press the CLOCK/TIMER button repeatedly
until clock setting display (time indication)
2
appears on the display.
Setting the Clock
Each time you press the button, display changes as follows:
DAILY
=
ON TIME
=
REC
=
ON TIME
=
Clock Setting
When you plug the AC power cord into the wall outlet, the time in-
dication “0:00” blinks on the display.
display (time indicator)
=
Canceled
=
(back to the beginning)
You can set the clock whether the System is on or off.
Press the SET button.
3
4
The hour digits of the current clock blink on the display.
Using the Unit
Follow steps 2 to 5 of “Setting the Clock” men-
tioned above.
Press the CLOCK/TIMER button.
The hour digit of the time indication blinks on the display.
1
4 ¢
Press the
or
button to set the hour.
2
Pressing the ¢button moves the time forwards and pressing
the 4button moves it backwards. Holding down the button
moves the hour rapidly.
• The clock must be correctly set for the timers to work.
• Each setting step must be completed within approx. 30
seconds. Otherwise, the setting is cleared and must be
repeated from the beginning.
• The clock may gain or lose one to two minutes per month.
• If there is a power failure, the clock loses its setting
immediately. “0:00” blinks on the display and the
clock must be reset.
Press the SET button.
The minute digits of the time indication blink on the display.
• To return to the hour setting, press the CANCEL button.
3
4 ¢
Press the
or
button to set the minute.
4
5
Press the SET button.
“CLOCK OK” appears on the display. Then, the selected time
is set and the seconds start counting from 0.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
2. Press the ¢or 4button to set the minute, then press the
SET button.
Setting the Daily Timer
Once you have set the Daily Timer, the timer will be activated at
the same time every day.
The Timer indicator ( ) and “DAILY” indicator on the display
shows that the Daily Timer you have set is in effect.
You can set the Daily Timer whether the System is turned on or
off.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
• You can set the Daily Timer whether the System is on or off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
Setting the OFF time (Example: 13:15).
1. Press the ¢ or 4 button to set the hour you want the
System to be turned off, then press the SET button.
The minute digits of the OFF time blink on the display.
3
Using the Unit
Press the CLOCK/TIMER button until “ON
TIME” immediately after “DAILY” appears on
1
the display.
At this time, “DAILY” indicator blinks and the Timer indica-
tor ( ) lights up on the display.
Each time you press the button, the display changes as follows:
DAILY =ON TIME* =REC =ON TIME =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the Daily Timer setting.
2. Press the ¢or 4button to set the minute, then press the
SET button.
Then, the System enters ON-time setting mode, and the current
ON time appears on the display and the hour digits blink.
The System enters Music Source Selecting mode and
“TUNER FM” appears on the display.
Selecting the music source.
4
Press the ¢ or 4 button to select the music source you
want to listen to, then press the SET button.
Each time you press the ¢or 4button, the display chang-
es as shown below:
Setting the ON time (Example: 10:15).
1. Press the ¢ or 4 button to set the hour you want the
System to come on, then press the SET button.
2
TUNER FM =TUNER AM = CD =TAPE =AUX
The minute digits of the ON time blink on the display.
Pressing the ¢button moves the time forwards and press-
ing the 4button moves it backwards.
IN =(back to the beginning)
According to the music source you have selected, the next op-
eration differs.
Holding down the button moves the time rapidly.
TUNER FM: Tunes in to the specified preset FM station.
TUNER AM: Tunes in to the specified preset AM station.
CD:
Plays the specified track on the specified CD.
TAPE:
AUX IN:
Plays a tape in Deck A.
Plays an external source.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the ¢ or 4 button to select the preset station
number, then press the SET button.
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until the “DAILY” appears on the
display.
1
When selecting CD :
Press the ¢ or 4 button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as fol-
lows:
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“DAILY” indicator go out.
2
DISC – =DISC 1 =DISC 2 =DISC 3 =(back to the be-
ginning)
• If no disc number is specified, playback will start from the
first track of the currently selected disc.
When selecting TAPE:
To activate the cancelled Daily Timer:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so that it will turn on at the ON
time set by the System.
Press the CLOCK/TIMER button on the Unit
1
repeatedly until the “DAILY” appears on the
display.
To allow this, the equipment should have the timer function.
The “DAILY” indicator blinks and the Timer indicator (
lights up on the dispaly.
)
Setting the volume level.
Press the ¢or 4button to select the volume level.
VOL – – : When the volume level is under 18: The current vol-
ume level will be used.
When the volume level is over 19: The volume level is auto-
matically set to 18.
5
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “DAILY” indicator remain lit, and the display returns to
the original display.
2
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
Press the SET button.
6
7
Setting the REC (Recording)
Timer
The timer setting is completed and the display returns to the
display before you set the Timer.
Press the
STANDBY/ON button to turn
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
off the System, if necessary.
The Timer indicator ( ) and “DAILY” indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
• You can set the REC Timer whether the System is on or
off.
• Perform each setting within approx. 30 seconds. Other-
wise, setting will be cleared and the procedure must be
repeated from the beginning.
• If you have made a mistake while setting the timer, press
the CANCEL button on the Unit. However, this does not al-
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on the
Unit repeatedly until the display returns to the original dis-
play, and start from the first step.
When the timer ON-time comes:
The following operation will be automatically repeated every day.
• When the timer ON-time comes, the System automatically
turns on. The music source you have set is played. The Timer
indicator ( ) blinks and “DAILY” indicator lights during
timer operation.
• When the timer OFF-time comes, the System automatically
turns off. Then, the Timer indicator ( ) and “DAILY” indica-
tor remain lit on the display.
• If the System is already on when the timer ON-time
comes, the Daily Timer does not work.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Using the Unit
Press the
STANDBY/ON button to turn
8
You can set the time in the same way as for setting the Daily Tim-
er.
off the System, if necessary.
The Timer indicator ( ) and “REC” indicator are lit on the
display, showing that the Rec Timer is set to on.
Insert a blank or erasable tape into the Deck
B and wind past the tape leader.
1
To confirm / change the timer setting, repeat the setting pro-
cedure from the beginning.
Press the CLOCK/TIMER button until “ON
TIME” immediately after “REC” appears on
2
When the timer ON-time comes:
• When the timer ON-time comes, the System automatically
turns on. The station you have set is played. The Timer indica-
tor ( ) blinks during timer operation.
To stop timer recording, press the 7button.
• When the timer OFF-time comes, the System automatically turns
off.
the display.
The Timer indicator ( ) lights and the “REC” indicator
blinks.
Each time you press the button, the display changes as follows:
DAILY =ON TIME =REC =ON TIME* =Clock setting
display =Canceled =(back to the beginning)
*: This item should be selected for the REC Timer setting.
Then, the System enters ON-time setting mode. The current
ON time appears on the display and the hour digits blink.
• If the System is already on when the timer ON-time
comes, the REC Timer does not work.
Turning the REC (Recording) Timer On and Off
Once you have set the REC Timer to record a source, the timer set-
ting is stored in memory. So, though the REC Timer turns off once
it is used, you can recall it at any time.
To cancel the REC Timer temporarily:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
play.
1
Setting the ON time you want the System to
3
turn on.
1. Press the 4or ¢button to set the hour, then press the
SET button.
Press the CANCEL button on the Unit.
“OFF” appears and both the Timer indicator ( ) and the
“REC” indicator go out.
2
2. Press the 4or ¢button to set the minute, then press the
SET button.
“OFF TIME” appears and then the System enters OFF-time
setting mode. The current OFF time appears on the display,
and the hour digits blink.
To activate the cancelled REC Timer:
Press the CLOCK/TIMER button on the Unit
repeatedly until “REC” appears on the dis-
1
Setting the OFF time you want the System to
4
turn off.
play.
1. Press the 4or ¢button to set the hour, then press the
The Timer indicator ( ) lights and the “REC” indicator
blinks on the display.
SET button.
2. Press the 4or ¢button to set the minute, then press the
SET button.
The System enters Preset Station Entering mode.
Press the SET button on the Unit.
“ON” appears on the display. The Timer indicator ( ) and
the “REC” indicator remain lit, and the display returns to the
original display.
2
Select the preset station for recording.
5
1. Press the 4or ¢button to set the band (TUNER FM or
TUNER AM), then press the SET button.
2. Press the 4or ¢button to set the preset number, then
• If the System is unplugged, or a power failure occurs,
the timer setting will be lost in a few days. You will
need to reset the clock first, then the timer.
press the SET button.
Setting the volume level.
6
Press the ¢or 4button to select the volume level.
VOL – – : The current volume level will be used.
MIN, 1-31, or MAX: When the timer is turned on, the Volume
will be automatically set to the selected level.
Press the SET button.
The timer setting is completed and the display returns to the
display before you set the Timer.
7
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Setting the SLEEP Timer
Timer Priority
Use the Sleep Timer to turn the System off after a certain number
of minutes when it is playing. By setting the Sleep Timer, you can
fall asleep to music and know that your System will turn off by it-
self rather than play all night.
Since REC Timer and DAILY Timer can be set independently, you
may wonder what happens if the settings overlap. Here are the pri-
orities for REC Timer and DAILY Timer:
• Timer with the earlier time setting will have the priority.
Timer will not operate when other Timer is operating.
• If other Timer is set to an exact same time as the REC Timer,
the REC Timer will have the priority.
• You can only set the Sleep Timer when the System is on.
Using the Remote Control
During playback a source, press the SLEEP
1
❏ REC Timer and DAILY Timer will not operate when SLEEP
Timer is operating.
button.
The “SLEEP” indicator starts blinking on the display.
Example
Setting
Set the length of time you want the source to
play before shutting off.
Each time you press the SLEEP button, the time length chang-
es as follows:
2
ON
OFF
REC Timer
ON
OFF
10 = 20 = 30 = 60 = 90 = 120 = OFF = (back to the
DAILY Timer
beginning)
21:30
ON
22:00
22:30
OFF
23:00
Operation
Wait for 5 seconds.
The “SLEEP” indicator stops blinking and remains lit, and the
display returns to the original one before setting the Sleep
Timer.
3
REC Timer
The System is now set to turn off after the number of minutes
you have set.
DAILY Timer
To Confirm the Sleep Time:
21:30
22:30
When the SLEEP button on the Remote Control is pressed, the re-
maining sleep time is displayed. Wait until the display returns to
the original display.
Operates only in REC Timer mode.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button on the Remote Control until the “SLEEP”
indicator goes out on the display.
• Turning off the System also cancels the SLEEP Timer.
• When the REC Timer or the DAILY Timer is operating,
SLEEP Timer can not be set.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Care And Maintenance
Handle your CDs and tapes carefully, and they will last a long
time.
Cassette Tapes
• If the tape is loose in its cassette, take up
the slack by inserting a pencil in one of
the reels and rotating.
• If the tape is loose, it may get stretched,
cut, or caught in the cassette.
Compact Discs
• Remove the CD from its case by holding
it at the edges while pressing the case’s
center hole lightly.
• Do not touch the shiny surface of the
CD, or bend the CD.
• Do not touch the tape surface.
• Put the CD back in its case after use to
prevent warping.
• Be careful not to scratch the surface of
the CD when placing it back in the case.
• Avoid exposure to direct sunlight, tem-
perature extremes, and moisture.
• Do not store the tape:
- In dusty places
- In direct sunlight or heat
- In moist areas
- On a TV or speaker
- Near a magnet
• A dirty CD may not play correctly. If a
CD does become dirty, wipe it with a
soft cloth in a straight line from center to
edge.
Cassette Deck
• If the heads, capstans, and pinch-rollers of the Cassette Deck
become dirty, the following will occur:
- Loss of sound quality
- Discontinuous sound
- Fading
- Incomplete erasure
- Difficulty recording
CAUTION:
• Do not use any solvent (for example, conven-
tional record cleaner, spray thinner, benzine,
etc.) to clean a CD.
• Clean the heads, capstans, and pinch-rollers using a cotton
swab moistened with alcohol.
General Notes
In general, you will have the best performance by keeping your
CDs and the mechanism clean.
Pinch-roller
Capstan
• Store CDs in their cases, and keep them in cabinets or on
shelves.
• Keep the System’s Top Cover closed when not in use.
Moisture Condensation
Moisture may condense on the lens inside the System in the
following cases:
• After turning on heating in the room.
• In a damp room.
• If the System is brought directly from a cold to a warm
place.
Should this occur, the System may malfunction. In this case,
leave the System turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
Heads
• If the heads become magnetized, the Unit will produce noise or
lose high frequencies.
• To demagnetize the heads, turn off the Unit, and use a head
demagnetizer (available at electronics and record shops).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
• If you are having a problem with your System, check this list for a possible solution before calling for service.
• If you cannot solve the problem from the hints given here, or the System has been physically damaged, call a qualified person, such as
your dealer, for service.
Symptom
Possible Cause
Action
No sound is heard.
•
•
Connections are incorrect, or loose.
Headphones are connected.
•
•
Check all connections and make corrections.
(See pages 4 to 6.)
Disconnect the headphones.
Poor radio reception
•
•
The antenna is disconnected.
The AM Loop Antenna is too close to the Sys-
tem.
The FM Wire Antenna is not properly
extended and positioned.
•
•
Reconnect the antenna securely.
Change the position and direction of the AM
Loop Antenna.
Extend FM Wire Antenna to the best reception
position.
•
•
The disc tray does not open.
•
•
The AC power cord is not plugged in.
Tray is locked.
•
•
Plug the AC power cord.
Unlock the tray. (See page 15.)
The CD skips.
The CD is dirty or scratched.
The CD is upside down.
Clean or replace the CD. (See page 25.)
Put the CD in with the label side up.
Replace the disc.
The CD does not play.
The MP3 disc does not play.
•
•
No MP3 files are recorded on the disc.
MP3 files do not have the file extension —
.MP3, .Mp3, .mP3, or .mp3 in thier file names.
MP3 files are not recorded in the format com-
pliant with ISO 9660 Level 1 or Level 2.
•
The readout time of the MP3 disc is too long.
The readout time varies with the complexity of Do not use too many hierarchies and folders when
the recording configuration.
recording. Also, do not record any other types of au-
dio tracks together with MP3 files. (See page 11.)
The cassette holder cannot be opened.
Unable to record.
During tape playing, the power cord was unplugged. Plug in the power cord, and turn on the System.
Cassette record protect tabs are removed. Cover holes on back edge of cassette with tape.
Unable to operate the Remote Control.
•
•
The path between the Remote Control and the
sensor on the Unit is blocked.
The batteries have lost their charge.
•
•
Remove the obstruction.
Replace the batteries.
Operations are disabled.
The built-in microprocessor has malfunctioned due Unplug the System then plug it back in.
to external electrical interference.
Specification
Amplifier
Unit
Output Power 140 W per channel, min. RMS, driven
Dimensions 270 mm
×
306 mm
×
456 mm (W/H/D)
into 6 Ω at 1kHz, with no more than
10% total harmonic distortion
(IEC 268-3)
Mass Approx. 8.6 kg
Speaker Specifications (each unit)
SP-MXKC4
Input Sensitivity/Impedance (1 kHz)
Type 3-way bass-reflex type
Speaker Unit Woofer: 16 cm cone × 1
Mid:
Tweeter; 2cm dome × 1
Power Handling Capacity 140 W
AUX IN 400 mV/50 kΩ
Speaker terminals 6 Ω - 16 Ω
Phones 32 Ω - 1 kΩ
5cm cone × 1
15 mW/ch output into 32 Ω
Cassette Deck Section
Impedance 6 Ω
Frequency Range 45 Hz - 22 000 Hz
Sound pressure level 87 dB/W·m
Dimensions 266 mm × 333 mm × 241 mm (W/H/D)
Mass Approx. 3.9 kg
Frequency Response
Type I (NORMAL) 63 Hz - 12 500 Hz
Wow And Flutter 0.15% (WRMS)
CD Player
CD Capacity 3 CDs
Accessories
Dynamic Range 85 dB
Signal-To-Noise Ratio 85 dB
Wow And Flutter Unmeasurable
Tuner
AM Loop Antenna (1)
Remote Control (1)
Batteries R6P (SUM-3)/AA (15F) (2)
FM Wire Antenna (1)
AC Plug Adaptor (1)
FM Tuner
Power Specifications
Tuning Range 87.50 MHz - 108.00 MHz
Power Requirements AC 110 V/127 V/220 V/230 V-240 V
adjustable with voltage selector,
,
(at AM9 kHz channel space)
87.5 MHz - 108.0 MHz
(at AM10 kHz channel space)
AM Tuner
Tuning Range 531 kHz - 1710 kHz (at AM9 kHz
channel space)
50 Hz/60 Hz
Power Consumption 140 W (power on mode)
22 W (in Standby mode)
530 kHz - 1710 kHz (at AM10 kHz
channel space)
Design and specifications are subject to change without notice.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction (not applicable for Europe, U.S.A., Canada, Australia, and
U.K.)
IMPORTANT for mains (AC) line
BEFORE PLUGGING IN, do check that your
mains (AC) line voltage corresponds with the
position of the voltage selector switch provided
on the outside of this equipment and, if differ-
ent, reset the voltage selector switch, to prevent
from a damage or risk of fire/electric shock.
0205NYMCREBET
EN
© 2005 Vicotr Company of Japan, Limited
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Intel Drums MPCMM0002 User Manual
Invacare Mobility Aid M61TM User Manual
Jet Tools Saw HBS 814GH User Manual
Jotul Fan F 3 USA User Manual
JVC Car Video System VN V25U User Manual
JVC VCR HR A592UC User Manual
Kathrein Satellite TV System CAP 310 User Manual
Kenmore Gas Grill 1411668 User Manual
Kenwood Blender HB790 series User Manual
Kramer Electronics Switch VS 4FW User Manual