JCR-540
AM/FM STEREO SHOWER CD ALARM CLOCK RADIO
OPERATING INSTRUCTIONS
Please read this Instruction Manual completely before
using the unit and retain it for future reference
E-1
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION ON SPLASH RESISTANT:
This unit has been constructed to resist mild steam and light splashes from the shower or
bath only. It should not be operated under running water and under no circumstances
should it be fully immersed in water.
INSTALLATION
This AM/FM SHOWER CD CLOCK RADIO can be placed on a desktop or hung from your shower head,
shower curtain rod or from a hook on the wall or door.
USING THE STAND
USING THE DESK STAND
To use this unit with the supplied stand, simply place the unit onto the DESK STAND as shown in the
illustration then gently push the unit backward so it snaps in place. A “Click” will be heard.
To remove the unit from the Desk Stand, simply pull the tab located at the rear of the base in the
direction as shown to unlock the radio and lift it up.
PLACEMENT OF YOUR RADIO
Your radio is equipped with a detachable hanger rope that allows you to hang the radio from your
shower head, shower curtain rod or a hook on the back of the bathroom door.
ATTACHING THE ROPE HANGER/WALL MOUNT BRACKET
Attach the Rope Hanger/Wall Mount Bracket to the back of the unit as shown in the illustration.
(If you are using the wall mount feature then the hanger rope is not required. Please remove and save
this bracket for future use.)
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS AND CONTROLS
1. FM STEREO LED INDICATOR
2. STOP Button ■
15. CD DOOR OPEN Button
16. DC INPUT Jack (DC 9V
17. HEADPHONE Jack
18. SPEAKER
)
3. CLOCK LCD Display
4. SNOOZE/LIGHT Button
5. CD LCD DIPLAY
19. BATTERY DOOR
20. CD LID & MIRROW
21. FUNCTION SELECTOR
22. VOLUME Control
23. DIAL SCALE
6. PLAU/PAUSE Button
7. POWER LED Indicator
8. TIME SET Button
9. POWER ON Button
10. PROGRAM Button
11. POWER OFF Button
12. ALARM SET Button
13. TUNING Control
24. SKIP/SEARCH FORWARD Button
25. HOUR Button
26. REPEAT Button
27. SKIP/ SEARCH BACK Button
28. MINUTE Button
14. BAND SELECTOR
29. ROTARY LOCK
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCE
This unit operates on 6 ‘C’ size (UM2) batteries (not included) or with an external AC-DC adaptor with a
rating of 9 Volts DC, 500mA (not included) and the Clock operates on one (1) ‘AAA” (UM4) battery (not
included).
A. BATTERY OPERATION
For best performance and longer operating time, we recommend the use of alkaline batteries.
1. Open the Battery Door by aligning the Rotary Lock pointer with the “OPEN” index mark located on the
cabinet. A “Click” will be heard and you can now remove the door.
2. Following the polarity (+ and -) diagram shown inside the battery compartment, first insert one (1)
‘AAA’ size (UM4) battery in the smaller compartment and then the 6 ‘C’ size (UM2) batteries.
3. Replace the Battery Door and align the Rotary Lock pointer with the “LOCK” index mark located on
the battery door. A “Click” will be heard and the door is now secure.
BATTERY CARE
1. Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
2. (a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
3. If the unit is not to be used for an extended period of time, remove the batteries. An old or leaking
battery can cause damage to the unit and may void the warranty.
4. Do not try to recharge batteries not intended to be recharged, they can overheat and rupture. (Follow
battery manufacturer’s directions.)
5. Do not dispose of batteries in fire, batteries may explode or leak.
B. AC OPERATION
This unit can also be used with an AC-DC adaptor (not included). When the AC-DC adaptor is
connected to the DC Jack the batteries are automatically disconnected. Be sure to use an AC-DC
adaptor with a rating of 9 Volts DC, 500mA and with the following polarity:
If you are using a universal adaptor with an output polarity switch or polarized plugs, be sure to set the
polarity of the center plug to "+".
IMPORTANT: Never use this radio near water or in the shower when using an AC Adaptor.
Shock or personal injury could occur.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME SETTING
In order for the clock to function properly, the clock has to be set the first time you use the unit.
After powering up the unit, the clock display will show “12:00”. To set the time, follow the steps below:
1. Press and hold the TIME Button.
2. Press the HOUR Button repeatedly and release until the correct hour is displayed.
Note: Make sure the hour is set so that AM or PM is correctly displayed. There is a PM
Indicator located in the left bottom corner of the lower LCD. If the PM Indicator lights the
displayed time is “PM”. If the PM Indicator does not light, the time displayed is “AM”.
3. Press the MINUTE Button repeatedly and release both the TIME and MINUTE Buttons until the
correct minute is displayed.
CD PLAYER OPERATION
Note: This CD player will play not only commercial CDs, but also the self-compiled CD-R/RW discs. Do
not attempt to play CD-ROM, CDI, VCD, DVD or computer CDs.
Notes on CD-R/RW Discs
•
•
•
Because of non-standardized format definition/production of CD-R/RW, playback quality &
performance are not guaranteed.
Manufacturer is not responsible for the playability of CD-R/RW due to recording conditions such
as PC performance, writing software, media ability, etc.
Do not attach a label or seal to either side of the CD-R/RW disc. It may cause a malfunction.
1. Set the Function Selector (# 21) to the "CD" position.
2. To power on the unit, press the
Button. The POWER Indicator will light.
3. Press the PUSH OPEN Button to open the CD Door.
4. Load an audio CD with its label side facing out and close the CD Door. A click sound will be heard
indicating the CD Door is firmly locked.
5. “- -” will appear and blink in the upper Display. After a few seconds, the total number of tracks on
the CD will appear in the Display.
6. Press the
shown steadily in the Display.
7. Adjust the VOLUME Control to obtain the desired sound level from the Speakers.
Button once then the CD will start playing from the first track. Track No. “01” will be
8. To suspend playing, press the
Button. The Track No. “01” will flash. To resume playing, press the
Button again.
9. You can choose to play your favorite track directly by pressing the Skip Forward
Button to skip
forward or the Skip Back
be shown in the Display.
Button to skip backward. The track number of the selected track will
10. To repeat the current playing track, press the REPEAT Button until icon “1
corner of the Display.
“appears in the left top
11. To repeat the entire CD, press the REPEAT Button until icon “
” appears in the left top corner
of the Display. Press the REPEAT Button again to resume normal playback.
12. To stop playing, press the STOP ■ Button.
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
CD PROGRAMMED PLAY
This function allows your favorite tracks to be played in a programmed sequence.
1. Set the Function Selector to the “CD” position and press the Button to turn the unit on.
2. Open the CD Door, insert a CD and wait until the total number of tracks on the CD is displayed.
3. Press the PROG Button once. Program No, “01”, will be shown briefly and then changes to Track
No. “00” and flash together with the Program Indicator, “PROG”, in the Display.
4. Press the
Buttons to select the song to be programmed.
5. Press the PROG Button again to store your selection. Program No. “02” will be shown briefly and
resume to “00” and flash to prompt for another input.
6. Press the
Buttons to select the next song to be programmed and press the Program
Button again to store your second selection.
7. You may repeat steps #3 - #5 to program as many as 20 tracks. If you attempt to program more than
20 tracks, the Display will display flashing “01”.
8. To check the programmed tracks, press the PROG Button repeatedly. The Display will first show the
PROGRAM No. and then the programmed track number in the programmed sequence.
9. Press
Button to start programmed play.
ꢀ
After all the programmed tracks have been played the player stops but the program remains in
the memory.
ꢀ
Press the PROG Button and then the
Button to begin programmed playback again.
10. To resume normal playback, in “STOP” mode press the
Button.
11. To stop playing, press the STOP ■ Button.
12. To turn the Player off, press the “OFF” Button. The POWER Indicator goes off.
IMPORTANT
Always turn off the power when the unit is not in use in order to extend the battery life.
RADIO RECEPTION
1. Set the Function Selector to “RADIO” and set BAND Selector (# 14) to “AM” or “FM” for the desired
radio band.
2. Press the Button to turn unit on. The POWER Indicator lights up.
3. Turn the TUNING Control to obtain the desired radio station.
4. Adjust the VOLUME Control to obtain the desired sound level.
5. When you wish to turn off the Radio, press the “OFF” Button. The POWER Indicator goes off.
TIPS FOR BEST RADIO RECEPTION
The unit has built-in FM and AM antenna. To obtain the best reception, you may have to move or slightly
rotate the unit.
USING HEADPHONES
Inserting the plug of your headphones (not included) into the HEADPHONE Jack will enable you to listen to
the CD or Radio in private. When using headphones, the Speakers will be disconnected automatically.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1. Avoid extended play at very high volume as it may impair your hearing.
2. If you experience ringing in your ears, reduce the volume or shut off
your unit.
3. Do not use while driving a motorized vehicle. This is dangerous and
also illegal in some states.
4. Keep the volume at a reasonable level even if your headset is an
open-air type designed to allow you to hear outside sounds. Please
note excessively high volume may still block outside sounds.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
ALARM OPERATION
SETTING ALARM TIME
1.
2.
Press and hold the ALARM Button. Icon “AL” is displayed.
Press the HOUR Button repeatedly and release until the correct hour is displayed.
Note: Make sure the hour is set so that AM or PM is correctly displayed. There is a PM
Indicator located in the left bottom corner of the lower LCD. If the PM Indicator lights the
displayed time is “PM”. If the PM Indicator does not light, the time displayed is “AM”.
Press the MINUTE Button repeatedly and release both the TIME and MINUTE Buttons until the
correct minute is displayed. Icon “AL” disappears.
3.
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press THE ALARM Button. Icon “AL” appears.
The Display will change from current time to wake up time. Release the ALARM button to return to
current time. Icon “AL” disappeared.
WAKE TO RADIO
1. Set the FUNCTION Selector to “RADIO” and Power on the unit.
2. Select the band, station, and volume level that you wish to hear when the alarm comes 'On'. S
3. Set the FUNCTION Selector to “AUTO”. The ALARM Indicator will light up.
4. Reconfirm the wake up time settings by pressing the ALARM button.
5. The radio will turn 'On' at the selected wake up time. Icon “Z z” will blink while the alarm sounds.
6. To stop the radio, press the ALARM button. The radio will stop but the alarm remains set and will
turn the radio on again at the same time on the following day.
7. If you do not want the alarm to turn the radio on the following day, set the FUNCTION Selector to
the 'RADIO' or ‘CD” position.
WAKE TO BUZZER
1. Set the FUNCTION Selector to the “AUTO”. The ALARM indicator will light up.
2. Set the BAND Selector to “AL”.
3. At the selected wake up time the buzzer will sound. Icon “Z z” will blink while the alarm sounds. The
Buzzer will sound for 1 minute and stop but the unit remains on. Icon “Z z” stops flashing.
4. If you want to listen to the radio after wake up, set the BAND Selector to “FM” or “AM”.
5. To stop the buzzer, press the ALARM button. The buzzer will stop but the alarm remains set and
will turn the buzzer on again at the same time on the following day.
6. If you do not want the alarm to turn the buzzer on the following day, set the FUNCTION Selector to
the 'RADIO' or ‘CD” position.
SNOOZE ALARM
After the radio or buzzer alarm sounds, you may press the SNOOZE button for a few more minutes
sleep. The alarm will stop for approximately 4 minutes and then turn on again.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
TIPS ON USING YOUR FOG-RESISTANT MIRROR
1. Never use alkaline (caustic), alcohol or other organic cleaning agents to clean the mirror surface
since this will cause permanent damage to the mirror.
2. Never use an abrasive cloth or paper to clean the mirror surface. This may damage the surface
and adversely affect the life of the fog-resistant coating.
3. The fog-resistant mirror is designed to minimize condensation on the surface under normal, warm
shower conditions. However, under extremely or humid conditions, some condensation is
unavoidable.
4. Should water condense on the mirror surface, clean it with a soft lint-free cloth only.
CARE AND MAINTENANCE
1. Clean this unit with a damp (never wet) cloth. Solvents or detergents should never be used.
2. Avoid leaving this unit in direct sunlight or in hot or dusty places.
3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent
lamps or motors.
4. If drop-outs or interruptions occur in the music during CD play, or if the CD
fails to play at all, its bottom surface may require cleaning. Before playing,
wipe the disc from the center outwards with a good soft cleaning cloth.
5. Your unit has rubber seals to minimize the risk of moisture getting inside.
However, do not immerse it in water since permanent damage to the
electrical and mechanical parts will result.
6. Always clean the outside of the cabinet thoroughly if it becomes wet with moisture or water splashes.
This will help to prevent the internal parts of the unit from entry of water and possible moisture
damage.
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If you experience difficulties in the use of this music system, please check the following or call
1-800-777-5331 for Customer Service.
Symptom
Possible Cause
Solution
Can not turn unit on
Function selector is set to AUTO Set Function Selector to RADIO or
CD
Noise or sound distorted
on AM or FM broadcast.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station. Reposition the unit until the
best reception is obtained.
No AM or FM sound.
CD player will not play
The unit is not in AM or FM
function mode.
Volume at minimum
Unit not in CD function mode.
CD is installed incorrectly.
It the CD is self-compiled, the
media used may not be
compatible with the player.
Weak Batteries
Set function selector to AM or FM.
Increase volume
Select CD function mode.
Insert CD with label side up.
Use better quality blank media and
retest.
Replace all batteries.
CD skips while playing
Disc is dirty or scratched.
Wipe CD with clean cloth or use
another disc.
Intermittent sound from
CD Player
Dirty or defective disc
Dirty pick up lens
Clean or replace the defective disc
Use a CD-lens cleaning disc to
clean the lens
Player is subject to excessive
shock or vibration
Relocate the player away from
shock or vibration
No Snooze function
Alarm duration (1 minute)
has elapsed.
Press the SNOOZE Button while
Icon “Z z” blinks.
SERVICE
Please refer to the instructions on the enclosed warranty card for returning your unit for service. When
returning the unit, please remove batteries to prevent damage to the unit in transit and/or from possible
battery leakage. We are not responsible for batteries returned with the product or for the cost of
replacement.
Distributed by:
Spectra Merchandising International, Inc.
Chicago Industry Tech Park
4230 North Normandy Avenue
Chicago, IL60634, U.S.A.
Please have model number ready, for Customer Service, call 1-800-777-5331
Printed in China
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
|