98064
™
EasyCam Pro
Instruction Manual
For technical support contact Jasco Products at 1-800-654-8483 or
Download from Www.Somanuals.com. All Manuals Search And Download.
User’s Manual
USB VGA Webcamera
Table of Contents
1. How To Install And Use The PC Camera
1.1 Use installer to install camera driver (Recommended) .........................02
1.1.1 Install Driver………………………..…………………………………..02
1.1.2 Install Application Software……………………..……………………02
1.2 How To Use Your PC Camera……………………………………………...03
2. How To Install MSN® Messenger (For Windows 98/Me/2000/XP/Vista)
2.1 How To Install MSN Messenger ............................................................04
2.2 How To Start With PC Camera..............................................................04
3. Getting Started With ArcSoft VideoImpression……..……………...….…05
4. Getting Started With ArcSoft PhotoImpression………..…………..….…12
1
Download from Www.Somanuals.com. All Manuals Search And Download.
1. How To Install and Use The PC Camera
There are two ways to install Camera Driver:
1.1 Use Installer to install camera driver (Recommended)
Don’t connect the camera to your computer yet!
1.1.1 Install Driver
Insert the CD into your CD-ROM drive; the installer screen will automatically come
up. Click the "Install Device Driver" button to start installing.
Note #1: If the installer screen does not come up automatically, click Start,
then Run and execute the file “launch.exe” on the CD to start the
installer program.
1.1.2 Install Application Software
Check the box in front of the Software you would like to install, then click the
"Install Application Software" button to start installing, then follow the instructions
to proceed installation.
When installation completes, the Application Software group will appear as a
folder on the Programs Menu. To start the Application software, click "Start", point
to "Programs", and then click the Application software.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 How To Use Your PC Camera
1.2.1 Plug PC camera's connector to the USB port on your computer.
1.2.2 Set the Focus
1. Start VideoImpression.
2. Select “Capture Video”
3. Turn the focus ring until image becomes sharp.
1.2.3 Video Recording:
1. Start VideoImpression.
2. Select “Capture Video”
3. To start video recording, click on “Record
4. To stop video recording, click on “Stop
” .
”.
5. To save captured video, Produce → Drive → Microsoft AVI file, type filename and
press ”Start” button
1.2.4 Capturing a Single Frame by Camera Snapshot Button
1. Start VideoImpression.
2. Press the snapshot button on the top of camera to capture a single frame.
Snapshot button
MIC
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. How to Install MSN® Messenger
2.1 How To Install MSN Messenger
2.1.1 For Windows Vista/XP/2000/Me/98 Users
After the installation package is downloaded to your computer, it will start
installing MSN Messenger. All you have to do is follow the instructions.
2.1.1.2 After the installation is completed, click Start, point to Programs, and click MSN
Messenger.
2.1.1.3 After you run Messenger for the first time, you can add friends to your list and
send instant messages.
2.2 How To Start With PC Camera
2.2.1 Plug the PC camera into your PC first.
2.2.2 Click the “Messenger”
to go to the main screen
during a conversation.
2.2.3 Click the Webcam icon
–or–
2.2.4 Click the Actions menu on the main window, click Start a Webcam
Conversation, select the name of the person you want to send video to, and
then click OK.
For a 2-way webcam conversation, both participants must have a Web camera
and each person must invite the other.
2.2.5 To stop sending your video image during a conversation, click the arrow under
your video window, and then click Pause Webcam or Stop Webcam. You can
continue to receive the other person's image, but your image will freeze in your
contact's conversation window.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Getting Started With VideoImpression
When you first run the program, a window will appear that lets you choose the type of
project you want to make (you can also open previously saved projects). Choose “Create a
New Video.” A new window will appear. It will contain multiple options for gathering your
video content.
For this walk-though, choose “Get From Album.” Even if you choose one of the other
options, you’ll end up at your albums soon or later. Albums contain shortcuts to files stored
on your system. You’ll grab most of your “media” for movie construction from your albums.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 MEDIA
This first step is where you select the “media” (still images, videos, and sound clips) that you
want to use to create your movie. All you need to do is choose the components you want
and add them to the Storyboard. When you save—or “produce”—your movie, all the
components on the Storyboard will be combined together into a single video file.
Let’s look at the Storyboard again:
Video Clips & Still Images
Transitions
Audio Tracks
The Storyboard
The large squares are reserved for still images and video clips. The two horizontal bars
beneath are reserved for audio tracks. The smaller squares between the still image/video
clip components are for “transitions.”
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 EDIT
You’re now ready to touch up and modify your movie components. Different editing options
are available depending on the component type.
3.2.1 MODIFYING IMAGE AND VIDEO BRIGHTNESS/CONTRAST
1. Single-click the desired still image or video clip on the Storyboard.
2. Click and drag the sliders to your liking. You can preview the effect within the Player.
3.2.2 TRIMMING VIDEOS AND AUDIO
1. Select the desired video or audio clip on the Storyboard.
2. Drag the Starting Mark to the spot where you would like the clip to begin playback.
3. Drag the Ending Mark to the spot where you would like the clip to end.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 EFFECTS-TRANSITIONS
The third step in the creation process lets you add cool scene transitions between each still
image or video component on the Storyboard.
Transitions are effects that occur as one movie component changes to another. You can
add/delete transitions in the same way that you add/delete media components. Click the
“Randomize” button to automatically add a random transition to each spot. You can go back
to Step 2 to modify the display time for your transitions as well.
3.4 TEXT
This step lets you add text over any still image or video component on the Storyboard. Click
on the component you want, then type in your text. You can modify all the standard
parameters, such as font, size, style, alignment, and color.
You can also add a shadow. To do this, check the Shadow box. Click and drag within the
preview to position the shadow behind the text. Use the sliders to adjust the shadow blur
and intensity.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 NARRATE
In addition to being able to add audio files to the Storyboard, you can also record audio
directly within the program. To record audio:
1. Click the Audio Settings button and verify the audio configuration (in general, higher
settings will yield higher audio quality but larger file sizes).
2. Click the red Record button.
3. Set the file name and save location for the recorded file. If you want, you can have
the file automatically added to an album for easy access in another project.
4. Click the Start button and begin your narration. Press the Stop button to stop
recording.
5. Click the Add button to add the recorded audio to the Storyboard.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 PRODUCE
The final step lets you save your movie in a variety of ways. Consult the Help file for details
on the specifics of each case. For this guide, we’ll save a movie as a VCD. When you do
this, you can pop the CD into most commercial DVD players to see your movie on your TV!
1. Click on the CD tab.
2. Select the device/drive to which the movie will be written or “burned.”
3. Choose the burn speed.
4. Choose the file type. (Remember, we’re creating a VCD, so choose “Video CD File.”)
5. Click Start when you’re ready!
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Getting Help
VideoImpression provide an extensive online help. If you need more information or
instructions on how to use a specific feature or tool, click the [Help] button on the upper
corner of the screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Getting Started With PhotoImpression
4.1.1 Connect your camera and your PC with the supplied USB cable.
4.1.2 Click StartÆ Select ProgramsÆ PhotoImpression
4.1.3 PhotoImpression main Screen will appear on your desktop.
4.2 Viewing Camera Images through PhotoImpression
4.2.1 To capture a video from the camera to the PhotoImpression main screen .
4.2.2 Click the [Digital Camera/Scanner
4.2.3 Click the [Soc PC Camera ] button.
] button.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 PHOTO VIEW OPTIONS
When viewing a single photo, use the set of tools along the top of the screen to zoom in/out,
skip to other photos stored in the same location, and rotate the current picture left or right.
4.4 ENHANCING PHOTOS
When you’re ready to edit a photo, bring it up on the screen and then proceed to the Enhance
module. From there, you can perform various types of modifications.
4.5 Getting Help
PhotoImpression provide an extensive online help. If you need more information or instructions
on how to use a specific feature or tool, click the [Help] button on the upper corner of the
screen.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
|