®
ENGLISH
CONTENTS
VIDEO CASSETTE RECORDER
SAFETY FIRST
2
Safety Precautions ...................... 2
INSTALLING YOUR NEW RECORDER 3
Basic Connections ..................... 3
HR-J277MS
HR-J271MS
INITIAL SETTINGS
4
Video Channel Set ..................... 4
Auto Set Up ............................... 6
On-Screen Displays ................... 8
Select Language ......................... 9
Clock Set ................................. 10
PLAYBACK
Basic Playback ..........................11
Playback Features .................... 12
11
RECORDING
16
Basic Recording ....................... 16
Recording Features .................. 17
B.E.S.T. Picture System ............. 18
CABLE/
SAT/DVD
VCR
TV
TV/VCR
AUDIO
TIMER RECORDING
20
1
2
5
3
6
2
Express Timer Programming ..... 20
Automatic Satellite Programme
Recording ................................ 25
4
VPS/PDC
DAILY/QTDN.
W
E
E
K
L
Y/H
E
B
D
O
7
0000
8
AUX
0
9
4
START
DEBUT
STOP
FIN
DATE
PR
EXPRESS
1
PROG
30 SEC
SPECIAL FEATURES
26
Remote Control Functions........ 26
STANDBY/ON
TV PR
+
EDITING
30
COLOUR SYSTEM
REC LINK
TV PR
–
REVIEW
SP
PR
SP/LP/EP
Edit To Or From Another Video
Recorder .................................. 30
Edit From A Camcorder ............ 31
INFORMATION ON MULTI-SYSTEM
COMPATIBILITY
TUNER SET
32
34
38
41
42
45
PAL NTSC
TROUBLESHOOTING
QUESTIONS AND ANSWERS
INDEX
SPECIFICATIONS
INSTRUCTIONS
EN
LPT0421-001B
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLING YOUR NEW RECORDER
EN
3
It's essential that your video recorder be properly connected.
Follow these steps carefully. THESE STEPS MUST BE COM-
PLETED BEFORE ANY VIDEO OPERATION CAN BE PER-
FORMED.
Basic
CHECK CONTENTS
listed in "Specifications" (੬ pg. 43).
Connections
Make sure the package contains all of the accessories
1
Aerial terminal
SITUATE RECORDER
Place the recorder on a stable, horizontal surface.
RF Cable
(provided)
2
CONNECT RECORDER TO
TV
The connection method you use depends on the type
of TV you have.
3
Back of TV
TV Aerial
Cable
AV-IN terminals
AV Cable
RF CONNECTION
● To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV aerial cable from the TV.
b– Connect the TV aerial cable to the ANT. IN jack
on the rear panel of the recorder.
(not provided)
c– Connect the provided RF cable between the RF
OUT jack on the rear panel of the recorder and
the TV's aerial terminal.
AV CONNECTION
Mains Power
Cord
● To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per "RF
CONNECTION".
b– Connect an optional AV cable between the
AUDIO OUT and VIDEO OUT connectors on the
rear panel of the recorder and the TV's AV-IN
terminals .
CONNECT RECORDER TO
MAINS
Rear View
Plug the end of the mains power cord into a mains
outlet.
AUDIO OUT/
VIDEO OUT
4
Mains outlet
NOTE:
Use the conversion plug (not provided in certain areas)
depending on the type of your AC wall outlet.
Connect the power plug to an AC
outlet before installing the lithium
battery. ੬ pg. 5
ATTENTION
If you have finished all the necessary connections, go to
"Video Channel Set" on page 4, then perform Auto Set Up on
page 6; do NOT press the
button on the recorder/remote
control to turn on the recorder's power before you start Auto
Set Up.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS
4
EN
If you have connected the video recorder to your TV
via the provided RF cable only (RF connection) – Go to
"With RF Connection" below.
Video
If you have connected the video recorder to your TV
via both the provided RF cable and an AV cable (AV
connection) – Go to "With AV Connection" on next
page.
Channel Set
Video Channel (RF Output Channel) is the channel on
which your TV receives picture and sound signals from the
video recorder through the RF cable.
With RF Connection
IMPORTANT:
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHANNEL
SET MODE
PR +/–
Hold down STOP/EJECT on the recorder until the
display panel shows the following.
1
SELECT TV SYSTEM
Press PR + or – to set appropriate TV system that
matches the system of TV being used (refer to the table
below).
2
1
4
7
2
5
8
3
6
9
2
4
1 : B/G 2 : D/K 3 : I
4 : H
TV System
Major Countries/Areas
0
New Zealand, Kuwait, U.A.E.,
Indonesia, Singapore, Thailand,
Malaysia, Iran, Saudi Arabia,
Egypt, Morocco, Lebanon, Iraq
B/G
PR +/–
1
China, Mongolia, Russia
Hong Kong
D/K
I
Australia
H
OK
TEST SIGNAL
The channel on which the screen to
the left appear clearly in step 3 is
your Video Channel.
To view picture signals from the video recorder, set
your TV to the Video Channel.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
5
With AV Connection
SET VIDEO CHANNEL
Set your TV to UHF channel 34.
IMPORTANT:
● If the two vertical white bars appear clearly on the
screen as shown in the illustration (੬ "TEST SIGNAL"
on page 4), press OK and then go to step 4.
● If the two vertical white bars do not appear clearly,
press OK and then PR + or – to set the video recorder
to a vacant channel between 28 and 60 which is not
occupied by any local station in your area.
3
4
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHANNEL
SET MODE
(Ex.) If channel 50 is available in your area
Hold down STOP/EJECT on the recorder until the
display panel shows the following.
1
2
Then set your TV to UHF channel 50 and check if the
two vertical white bars appear clearly on the screen; if
so, go to step 4. If not, re-set the video recorder to
another vacant channel and try again.
SET VIDEO CHANNEL
the following.
NOTES:
Press OK, then press PR – until the display panel shows
● If you set the video recorder to a channel which is
occupied by a local station or has neighbouring
channels that are occupied by local stations, the
picture reception quality will be affected and some
interference noise will appear on the TV screen. Be
sure to select a vacant channel which has no
broadcast on neighbouring channels.
Now the video channel is set to off (– –).
● If you cannot obtain the two vertical white bars
clearly with any channel between 28 and 60, consult
your JVC dealer.
FINISH VIDEO CHANNEL
SET
Press OK.
FINISH VIDEO CHANNEL
● If Auto Set Up (੬ pg. 6) or Tuner Set (੬ pg. 34)
has not previously been performed, the Language
Select screen appears and Auto Set Up function
takes place automatically.
3
SET
Press OK.
● If Auto Set Up (੬ pg. 6) or Tuner Set (੬ pg. 34)
has not previously been performed, the Language
Select screen appears and Auto Set Up function
takes place automatically.
To view picture signals from the video recorder, set
your TV to its AV mode.
Installing/Removing the lithium battery
Be sure to connect the power plug to an AC outlet first
before installing the lithium battery; otherwise, the
battery's service life will be drastically shortened.
1 Make sure that the power plug is connected to an AC outlet
and turn off the recorder power.
2 Open the battery cover while pressing the release tab as
illustrated.
3 Insert a lithium battery with the plus (+) side up and push it in.
● To remove the lithium battery, press the latch A down-
ward using a pointed non-metallic object, then pull out
the lithium battery.
4 Close the battery cover until it clicks in place.
A
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
6
EN
The Auto Set Up function simplifies installation by guiding you
through the procedures of setting the language, clock and tuner
channels — simply follow the on-screen menus that appear.
Auto Set Up
Before starting, make sure of the following:
● The TV aerial cable should be connected to the recorder.
● The recorder's mains power cord should be connected to
a mains outlet. ੬ pg. 3
● The "Video Channel Set" procedure should be done first
and the TV should be set to its AV mode (With AV
connection ੬ pg. 5) or video channel (With RF
connection ੬ pg. 4).
IMPORTANT
● Don't press any buttons on the recorder or remote that
are not directly related to the step you are performing
while Auto Set Up is in progress.
● If you perform Auto Set Up successfully during installa-
tion, there's no need to separately perform the Language
Select, Clock Set or Channel Set procedures, but if
adjustments become necessary they can be performed as
follows:
– To change the selected language ੬ pg. 9
– To reset or adjust the time ੬ pg. 10
– To add/delete channels manually ੬ pg. 35
– To reset the tuner after moving to a different location
੬ pg. 34
SELECT LANGUAGE
Press PUSH JOG %fi to place the pointer next to your
desired language (English, Arabic or Russian), then
1
2
press OK or PUSH JOG
.
● The Clock Set screen appears.
SET TIME
Press PUSH JOG %fi to
CLOCK SET
set the time, then press OK
or PUSH JOG
.
TIME
0:00
DATE
01.01
YEAR
00
● Press and hold either
button to delay or
advance the time by 30
minutes.
[5/ ] =
∞
[MENU] : EXIT
1
4
7
2
5
8
3
6
9
2
4
SET DATE
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG
.
3
4
0
● Press and hold either button to change the date by 15
days.
SET YEAR
1
Press PUSH JOG %fi to set the year, then press MENU.
OK
MENU
PUSH JOG
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
7
Major Countries/Areas
TV System
SELECT TV SYSTEM
appropriate TV system (refer to the table on the left).
Australia, New Zealand, Kuwait, U.A.E.,
Indonesia, Singapore, Thailand, Malaysia,
Iran, Saudi Arabia, Egypt, Morocco,
Lebanon, Iraq
Press PUSH JOG %fi to place the pointer next to the
B/G
5
6
START AUTO CHANNEL
SET
China, Mongolia, Russia
Hong Kong
D/K
I
Press OK or PUSH JOG
.
● The Auto Set Up function scans all the channels that
are receivable by your recorder. It then automatically
assigns each receivable channels to the PR +/ –
buttons. It skips non-receivable channels.
● As Auto Set Up progresses, the " " mark on the
screen moves from left to right. (See below.)
7
8
0
9
4
1
OK
PUSH JOG
DO NOT press any button on the recorder or remote control while Auto Set Up is in progress.
AUTO CH SET
PLEASE WAIT
TV Screen
START
FINISH
During Auto Set Up
"PLEASE WAIT" blinks on the screen and "Auto"
blinks on the front display panel.
When Auto Set Up is completed, the lowest position
number will appear on the front display panel.
NOTES:
● If you perform Auto Set Up when the aerial cable is not connected properly, "SCAN COMPLETED -NO SIGNAL-" appears on
the screen. When this happens, make sure of the aerial connection and press OK; Auto Set Up will take place again.
● If there is a power cut, or if you press
or MENU while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to
turn off the recorder power once and try again.
● If you want to set the tuner manually such as to add or skip channels, to swap channel positions, or to fine-tune channels,
੬ pg. 35–37.
● If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up,
the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. ੬ "TV System
Selection – When you see the picture but the audio can't be heard or sounds unnatural" on page 37.
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
8
EN
You can choose whether or not to have various operational
indicators appear on screen, by setting this function ON or OFF.
On-Screen
Displays
TURN ON THE RECORDER
Press
.
1
2
3
4
ACCESS MAIN MENU
Turn on the TV and select the VIDEO channel (or AV mode).
SCREEN
Press MENU.
ACCESS FUNCTION SET
SCREEN
1
4
7
2
5
8
3
6
9
Place the pointer next to "FUNCTION SET" by pressing
2
4
PUSH JOG %fi, then press OK or PUSH JOG
.
ENABLE/DISABLE
0
ON-SCREEN DISPLAY
The default setting is "ON",
FUNCTION SET
so if you want on-screen
B.E.S.T.
ON
AUTO
OFF
displays, leave the setting
1
PICTURE CONTROL
as it is and go to step 5. If
AUTO TIMER
you don't want the
O.S.D.
ON
AUTO SP=LP TIMER
OFF
displays to appear, press
PUSH JOG %fi to place
the pointer next to
[5/ ] =
∞
[MENU] : EXIT
"O.S.D." and press OK or
PUSH JOG to set to "OFF".
OK
MENU
RETURN TO NORMAL
PUSH JOG
SCREEN
Press MENU.
5
NOTES:
● When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting.
● During playback, the operation mode indicators may be
disturbed depending on the type of tape being used.
The superimposed indication on the TV screen tells you what the recorder is doing.
1– Operation mode indicators
2– Tape speed SP/LP/EP
1
10
3– Colour system indicator (੬ pg. 32)
4– Tape direction
q6
9
8
7
2
3
5– Counter display
]
PR. 12
SP
23 : 59
NTSC 3.58
6– Tape position indicator (੬ pg. 15)
7– Current day/month/year
8– Clock display
9– Channel position number/Aux. indicator (L-1)
10– Cassette loaded mark
31. 12. 95
4
5
+
+
+
+
0
6
–9 : 59 : 59
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
9
TURN ON THE RECORDER
Press
.
Select
1
2
3
Language
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS MAIN MENU SCREEN
Press MENU.
ACCESS INITIAL SET SCREEN
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
FUNCTION SET
"INITIAL SET", then press
TUNER SET
OK or PUSH JOG
.
INITIAL SET
[5/ ] =
∞
[MENU] : EXIT
1
4
7
2
5
8
3
6
9
2
4
ACCESS LANGUAGE SELECT
SCREEN
0
Press PUSH JOG %fi to place the pointer next to
"LANGUAGE", then press OK or PUSH JOG
.
4
5
6
SELECT LANGUAGE
1
Place the pointer next to the language of your choice
(English, Arabic or Russian) by pressing PUSH JOG
%fi, then press OK or PUSH JOG
.
RETURN TO NORMAL SCREEN
OK
Press MENU.
MENU
PUSH JOG
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS (cont.)
10
EN
TURN THE RECORDER ON
Press
.
Clock Set
1
2
3
4
Turn on the TV and select the VIDEO channel (or AV mode).
ACCESS MAIN MENU SCREEN
Press MENU.
ACCESS INITIAL SET SCREEN
Press PUSH JOG %fi to place the pointer next to
"INITIAL SET", then press OK or PUSH JOG
.
1
4
7
2
5
8
3
6
9
2
4
ACCESS CLOCK SET SCREEN
Press PUSH JOG %fi to place the pointer next to
"CLOCK SET", then press OK or PUSH JOG . The
Clock Set screen appears.
0
CLOCK SET
INITIAL SET
CLOCK SET
TIME
0: 00
DATE
YEAR
00
LANGUAGE
01 . 01
1
5
[
/
] =
∞
5
[
/
] =
∞
[MENU] : EXIT
[MENU] : EXIT
SET TIME
OK
Press PUSH JOG %fi to set the time, then press OK or
MENU
PUSH JOG
.
5
6
PUSH JOG
● Press and hold either button to delay or advance the
time by 30 minutes.
SET DATE
Press PUSH JOG %fi to set the date, then press OK or
PUSH JOG
.
● Press and hold either button to change the date by 15
days.
SET YEAR
Press PUSH JOG %fi to set the year.
7
8
START CLOCK OPERATION
Press MENU.
NOTE:
If the year digits are automatically cleared, it is possible that you
have input February 29th in a non-leap year. Input the correct data.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK
EN
11
The easiest, most basic operation possible with your video
recorder is tape playback. Already-recorded signals on a video
tape are read by your video recorder and displayed on your TV
just like a TV programme.
Basic
LOAD A CASSETTE
Playback
Turn on the TV and select the VIDEO channel (or AV mode).
Make sure the window side is up, the rear label side is
facing you and the arrow on the front of the cassette is
point toward the recorder. Don't apply too much
pressure when inserting.
1
● The recorder power comes on automatically and the
counter is reset to 0:00:00.
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button. (੬ pg. 32)
● If the record safety tab has been removed, playback
begins automatically. (੬ pg. 16)
FIND PROGRAMME START
POINT
If the tape is advanced past the start point, press REW.
To go forward, press FF.
2
3
4
START PLAYBACK
Press PLAY. "BEST" appears blinking in the recorder's
display panel during automatic tracking. (੬ pg. 18)
STOP PLAYBACK
Press STOP on the remote or STOP/EJECT on the
recorder's front panel. Then press STOP/EJECT to
remove the cassette.
1
4
7
2
5
8
3
6
9
2
4
Clean the video heads using
a dry cleaning cassette--TCL-
2UX--when:
0
• Rough, poor picture appears while a tape is played
back.
• The picture is unclear or no picture appears.
• “USE CLEANING CASSETTE” appears on the screen
(only with “O.S.D.” set to “ON” (੬ pg. 8).
1
FF
REW
Usable cassettes
● Compact VHS camcorder recordings can be played on
this video recorder. Simply place the recorded cassette
into a VHS Cassette Adapter and it can be used just like
any full-sized VHS cassette.
● This video recorder can record on regular VHS and
Super VHS cassettes. However, it will record and play
back regular VHS signals only. It is not possible to play
back a recorded Super VHS tape.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
Variable-Speed Search
12
EN
ACTIVATE VARIABLE-SPEED
SEARCH
Playback
Features
During playback, press PUSH JOG or
.
● The more times you press, the faster the playback
picture moves.
● To decrease speed, press the button for the opposite
direction.
1
To resume normal playback, press PLAY.
Still Picture/Frame-By-Frame
Playback
PR +/–
PAUSE DURING PLAYBACK
Press PAUSE. If there is vertical jitter, use the PR +/ –
buttons to correct the picture.
1
ACTIVATE FRAME-BY-FRAME
PLAYBACK
Press PAUSE.
1
4
7
2
5
8
3
6
9
OR
2
4
2
Press PUSH JOG or
.
To resume normal playback, press PLAY.
0
Slow Motion
PR +/–
ACTIVATE SLOW-MOTION
1
PLAYBACK
FF
During still picture, press and hold PAUSE for 2
REW
seconds, then release. Press and release again to return
1
to still picture.
PAUSE
OR
During still picture, press and hold PUSH JOG or
Release to return to still picture.
.
PUSH JOG
To resume normal playback, press PLAY.
High-Speed Search
ACTIVATE HIGH-SPEED
SEARCH
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
1
ATTENTION
To resume normal playback, press PLAY.
In the search, still, slow-motion or frame-by-frame
playback mode,
NOTE:
● the picture will be distorted.
● the noise bars will appear.
● the picture may not appear.
For short searches, press and hold FF or REW during playback
or still picture. When released, normal playback resumes.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
13
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the PR +/ – buttons.
REVIEW
1
4
7
2
5
8
3
6
9
2
4
OVERRIDE AUTOMATIC
TRACKING
0
Press PR + and – on the recorder to engage manual
tracking.
PR +/–
1
1
ADJUST TRACKING
FF
PAUSE
MANUALLY
REW
Press PR + or – to adjust tracking.
2
RETURN TO AUTOMATIC
TRACKING
Press PR + and – on the recorder to re-engage auto-
matic tracking.
3
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
Instant ReView
Repeat Playback
Simply by pressing a single button, the recorder power comes
on, rewinds, and begins playback of the last timer-recorded
programme. If you have several programmes recorded, you can
easily access any of them.
Your video recorder can automatically play back the whole tape
100 times repeatedly.
NOTE:
Before starting, make sure that the recorder is off and that the
Timer mode is disengaged.
START PLAYBACK
Press PLAY.
ACTIVATE INSTANT
REVIEW
1
Press REVIEW. The recorder power comes on and the
ACTIVATE REPEAT
recorder searches for the index code indicating the start
of the last timer-recorded programme. Once it's found,
playback begins automatically.
1
PLAYBACK
Press PLAY and hold for over 5 seconds, then release.
● If you have, for example, 3 programmes and you
want to watch the first of the 3 programmes, press
REVIEW three times. The recorder searches and
begins playback automatically. You can access a
programme as far as 9 index codes away from the
current tape position.
● The Play indicator ( ) on the display panel blinks
2
slowly.
● The tape plays 100 times automatically, and then
stops.
STOP PLAYBACK
NOTE:
Press STOP at any time to stop playback.
Instant ReView is not possible while the recorder is in the Timer
mode.
3
NOTE:
Pressing PLAY, REW, FF or PAUSE also stops Repeat Playback.
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYBACK (cont.)
14
EN
Index Search
Your recorder automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
£
2
NOTE:
Before starting, make sure the
recorder is in the Stop mode.
1
4
7
2
5
8
3
6
9
2
4
ACTIVATE INDEX SEARCH
Press PUSH JOG or (™ or £) on the remote
control. "™ 1" or "£ 1" is displayed on screen and
search begins in the corresponding direction.
0
1
● To access index codes 2 through 9, press PUSH JOG
or
repeatedly until the correct index number is
displayed.
1
30 SEC
FF
Ex.: To locate the beginning of B from the current
position, press PUSH JOG twice.
To locate the beginning of D from the current
position, press PUSH JOG once.
REW
Current position
OK
MENU
A
B
C
D
E
F
PUSH JOG
–2
–1
1
2
3
Index number
● When the specified index code is located, playback
begins automatically.
Skip Search
SKIP OVER UNWANTED
SECTIONS
Press 30 SEC 1 to 4 times during playback. Each press
initiates a 30-second period of fast-motion playback.
Normal playback resumes automatically.
1
NOTE:
To return to normal playback during a Skip Search, press PLAY.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
15
Next Function Memory
Picture Control
The Next Function Memory "tells" the recorder what to do after
rewinding. Before continuing, ensure that the recorder is in the
Stop mode.
This feature helps you to adjust the playback picture quality
according to your preference. *The default setting is "AUTO."
a– For Automatic Start Of Playback After Tape Rewind...
...press REW, then press PLAY within 2 seconds.
b– For Automatic Power Off After Tape Rewind...
ACCESS MAIN NENU
SCREEN
...press REW, then press
within 2 seconds.
Press MENU.
c– For Automatic Timer Standby After Tape Rewind...
...press REW, then press ‰ within 2 seconds.
1
NOTE:
ACCESS FUNCTION SET
It is not possible to select the Automatic Timer functions if the
cassette's record safety tab is removed.
SCREEN
Place the pointer next to "FUNCTION SET" by pressing
PUSH JOG %fi, then press OK or PUSH JOG
.
2
3
Tape Position Indicator
The tape position indicator
appears on screen when, from
the Stop mode, you press FF,
REW or perform an Index
SELECT PICTURE CONTROL
SET MODE
Search. The position of "5" in
3
Place the pointer next to
relation to "0" (beginning) or "+"
FUNCTION SET
+
+
+
0
"PICTURE CONTROL" by
(end) shows you where you are
on the tape.
1:23:45
B.E.S.T.
ON
AUTO
OFF
pressing PUSH JOG %fi,
then press OK or PUSH
JOG to select the
desired mode.
AUTO*: Normally select
"AUTO."
PICTURE CONTROL
AUTO TIMER
O.S.D.
"O.S.D." (੬ pg. 8) must be
set to "ON", or the indicator
will not appear.
ON
AUTO SP=LP TIMER
OFF
End
Beginning
5
[
/ ] =
∞
[MENU] : EXIT
NOTE:
It automatically adjusts the picture quality.
* When the B.E.S.T. function is set to "OFF" (੬
pg. 18), you can only select "NORM" instead
of "AUTO."
Depending on the type of tape used, there may be times when
the indication is not correct.
EDIT:
Select when you dub tapes.
SOFT: Select when you want to soften the picture.
SHARP: Select when you want to sharpen the picture.
NOTES:
● When you select "EDIT", "SHARP" or "SOFT", the
selected mode will not change until you select again.
● When you select "EDIT" to dub tapes, be sure to
select "AUTO" (or "NORM" when the B.E.S.T. function
is set to "OFF") after you finish dubbing the tapes.
RETURN TO NORMAL
SCREEN
Press MENU.
4
NOTE:
Select EDIT when you are dubbing tapes. Refer to page 30, 31.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING
16
EN
TV signals being received by the recorder's built-in tuner can be
recorded onto a video tape. You can "capture" a TV programme
using your video recorder.
Basic
LOAD A CASSETTE
Insert a cassette with the record safety tab intact.
Recording
Turn on the TV and select theVIDEO channel (or AV mode).
● The counter is reset to 0:00:00 and the recorder
power comes on automatically.
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button (੬ pg. 32).
1
CHOOSE A PROGRAMME
Press PR +/ – or the NUMBER keys to select the
channel you wish to record.
2
SET TAPE SPEED
Press SP/LP/EP (
). Check the SP/LP/EP indicator on
the recorder display panel to confirm the selected tape
speed.
3
4
START RECORDING
Press and hold RECORD and PLAY on the remote
control, or press RECORD on the recorder.
B.E.S.T. takes place at the beginning of each first
SP and first LP (or EP) recording after inserting the
cassette (੬ pg. 18).
PAUSE/RESUME
RECORDING
Press PAUSE. Press PLAY to resume recording.
1
4
7
2
5
8
3
6
9
2
4
5
6
NUMBER
STOP RECORDING
Press STOP on the remote control or STOP/EJECT on
the recorder. Then press STOP/EJECT to remove the
cassette.
0
PR +/–
1
SP/LP/EP
Recording Resume
Function
If there is a power outage during recording (or Instant Timer
Recording or timer recording), the recording will resume
automatically when power is restored to the recorder unless
the recorder's memory backup has expired.
PAUSE
RECORD
Accidental erasure prevention
● To prevent accidental recording on a recorded cassette,
remove its safety tab. To record on it later, cover the hole
with adhesive tape.
Record safety tab
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
17
Record One Programme
While Watching Another
Recording
Features
SELECT CHANNEL TO
WATCH
Once recording is in progress, all you need to do is to
set the channel controls on the TV for the station you
wish to view.
1
● The programme selected with the TV's channel
controls appears on the TV screen while the one
selected with the PR +/ – buttons is recorded on the
tape.
PR +/–
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
Press – –:– – until a counter reading appears on the
dispay panel.
1
● By pressing the – –:– – button, you can change the
display to show the counter reading, channel
position*, clock time.
– –:– –
*Channel position is not displayed during playback.
1
4
7
2
5
8
3
6
9
2
4
RESET COUNTER
Press 0000 before starting recording or playback.
● The counter is reset to "0:00:00" and shows the exact
2
0
0000
elapsed time as the tape runs.
PR +/–
Instant Timer Recording (ITR)
1
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the recorder off
after recording is finished.
START RECORDING
Press RECORD on the recorder.
1
ENGAGE ITR MODE
Press RECORD again. " " blinks and 0:30 appears on
the front display panel.
2
SET RECORDING DURATION
If you want to record for more than 30 minutes, press
RECORD to extend the time. Each press extends
recording time by 30 minutes.
3
NOTE:
You can only perform ITR using the RECORD button on the
recorder's front panel.
Download from Www.Somanuals.com. All Manuals Search And Download.
RECORDING (cont.)
18
EN
The B.E.S.T. (Biconditional Equalised Signal Tracking) system
checks the condition of the tape in use during recording and
playback, and compensates to provide the highest-possible
recording and playback pictures. The default setting for both
recording and playback is "ON".
B.E.S.T. Picture
System
Preparation
TURN ON THE RECORDER
Turn on the TV and select the VIDEO channel (or AV mode).
Press
.
1
2
3
ACCESS MAIN MENU
SCREEN
Press MENU.
ACCESS FUNCTION SET
SCREEN
Place the pointer next to
MAIN MENU
"FUNCTION SET" by
FUNCTION SET
pressing PUSH JOG %fi,
TUNER SET
then press OK or PUSH
INITIAL SET
JOG
.
[5/ ] =
∞
[MENU] : EXIT
SELECT MODE
1
4
7
2
5
8
3
6
9
2
4
Place the pointer next to
"B.E.S.T." by pressing
FUNCTION SET
B.E.S.T.
ON
AUTO
OFF
4
5
PUSH JOG %fi, then press
OK or PUSH JOG to set
to "ON" or "OFF".
PICTURE CONTROL
AUTO TIMER
O.S.D.
ON
0
AUTO SP=LP TIMER
OFF
[5/ ] =
∞
[MENU] : EXIT
1
RETURN TO NORMAL
SCREEN
PLAY
Press MENU.
PAUSE
OK
RECORD
MENU
PUSH JOG
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
19
Recording
Playback
The recorder assesses the quality of the tape once you initiate
playback.
START RECORDING
Press and hold RECORD and press PLAY on the remote,
or press RECORD on the recorder.
START PLAYBACK
1
DURING B.E.S.T.
Press PLAY.
1
● The recorder adjusts the playback picture quality
based on the quality of the tape in use.
B.E.S.T. COMPLETE
● B.E.S.T. is active during Auto Tracking. "BEST" appears
blinking on the recorder's display panel.
NOTES:
● When watching a tape recorded with "B.E.S.T." set to "ON", it
is recommended that you leave B.E.S.T. on during playback as
well.
● When watching a rental tape or one recorded on another
video recorder, or when using this recorder as the player for
editing, set B.E.S.T. to your preference by performing steps 1
through 5 on page 18.
● "BEST" only appears at the beginning of automatic tracking.
Even though it doesn't appear after that, the B.E.S.T. function
is operative.
● The recorder spends approximately 7 seconds
assessing the condition of the tape, then begins
recording.
NOTES:
● The B.E.S.T. system works for both SP and LP (or EP) modes
only after a tape has been inserted and the Record mode is
first initiated. It does not work during recording.
● In the case of timer recording, the B.E.S.T. system works
before recording is initiated.
● Once the cassette is ejected, the B.E.S.T. data is cancelled.
The next time the cassette is used for recording, B.E.S.T. is re-
performed.
● Pressing the recorder's RECORD button while "BEST" is
displayed does not start Instant Timer Recording
(੬ pg. 17).
ATTENTION
Since the B.E.S.T. system works before recording actually
starts, there is a delay of approximately 7 seconds after
RECORD and PLAY on the remote are pressed, or RECORD
on the recorder is pressed. To make sure you record the
desired scene or programme in its entirety, first perform the
following steps:
1) Press and hold PAUSE and press RECORD to engage the
RECORD PAUSE mode.
● The recorder then automatically checks the condition
of the tape and, after approximately 7 seconds, re-
enters RECORD PAUSE.
2) Press PLAY to start recording.
● If you want to bypass the B.E.S.T. system and begin
recording immediately, set "B.E.S.T." to "OFF" in step 4
on page 18.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
20
EN
ACCESS TIMER
Express Timer
Programming
PROGRAMMING SCREEN
Press PROG (If you're just
starting out, "P1" appears).
– P1 –
START
STOP
–:– –
=
–:– –
1
2
SP
DATE
– –.– –
TV PROG
– –
Remember, the clock must be set before you can
[+/–] =
[PROG] : EXIT
programme the timer (੬ pg. 10).
ENTER PROGRAMME
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system by pressing the
COLOUR SYSTEM button (੬ pg. 32).
START TIME
Press START +/– to enter
– P1 –
the time you want
recording to start.
START
21:00
STOP
–:– –
=
SP
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
DATE
– –.– –
TV PROG
– –
[+/–] =
[PROG] : EXIT
repeatedly to move 1
minute at a time.
ENTER PROGRAMME STOP
TIME
Press STOP +/– to enter the time you want recording to
stop.
3
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
ENTER PROGRAMME DATE
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
4
5
1
4
7
2
5
8
3
6
9
2
4
ENTER CHANNEL
POSITION
Press PR +/–.
– P1 –
0
START
21:00
STOP
22:00
=
PR +/–
SP
START+/–
PROG
DATE
TV PROG
10
25.04
1
[+/–] =
[PROG] : EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
21
SET TAPE SPEED
Press SP/LP/EP (
) to set the tape speed.
6
7
RETURN TO NORMAL
SCREEN
After confirming all information is correct, press PROG
or OK. "PROGRAM COMPLETED" appears on the
screen for about 5 seconds, then normal screen
appears.
● Repeat steps 1 – 7 for each additional programme.
ENGAGE RECORDER'S
TIMER MODE
Press ‰. The recorder turns off automatically and "‰"
appears on the display panel.
8
1
4
7
2
5
8
3
6
9
● To disengage the timer, press ‰ again.
2
4
To Timer-Record Weekly Or Daily Serials . . .
WEEKLY
. . . anytime during steps 2 through 7, press WEEKLY (NUMBER
key "9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday–Friday). Either "WEEKLY" or "DAILY" appears on
the screen. Pressing the button again makes the corresponding
indication disappear.
0
At the programme check screen
When the weekly serials are programmed, a day of the week
appears. When the daily serials are programmed, "DAILY"
appears.
1
SP/LP/EP
PROG
NOTE:
You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (੬ pg. 22).
OK
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
22
EN
Check, Cancel And Replace
Programmes
DISENGAGE TIMER MODE
Press ‰, then press
.
1
2
1
4
7
2
5
8
3
6
9
2
4
ACCESS PROGRAMME
CHECK SCREEN
Press ‰?.
PR START STOP CH DATE
1
2
3
4
5
6
7
8
8:00 10:00
10:00 10:45
11:30 13:00
3
2
1
24.04
TUE
0
25.04
PR +/–
START+/–
1
[ ‰? ] : NEXT
ACCESS PROGRAMME
SCREEN
OK
Press ‰? again to check
more information. Each
time you press ‰?, the
next programme's
– P1 –
MENU
START
STOP
8:00
=
10:00
3
SP
PUSH JOG
information appears.
DATE
24:04
TV PROG
3
[ ‰? ] : NEXT
To cancel or replace a programme...
CANCEL OR REPLACE A
PROGRAMME
Press to cancel a programme. To replace a
programme, press the appropriate button: START+/–,
4
STOP+/–, DATE+/–, PR+/–, SP/LP/EP (
).
RETURN TO NORMAL
SCREEN
Press ‰? as many times as necessary. If there are still
some programmes remaining, go on to step 6.
5
6
RETURN TO TIMER MODE
Press ‰.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
23
When programmes overlap
each other
If “PROGRAM OVERLAPPED” appears, you have another
programme overlapping the programme you have just made.
The Programme Check screen appears and conflicting
programmes will start blinking.
PR START STOP CH DATE
1
2
3
4
5
6
7
8
8:00 10:00
10:00 10:45
11:30 13:00
9:00 10:00
3
2
1
24.04
TUE
1
4
7
2
5
8
3
6
9
PROGRAM OVERLAPPED
2
4
25.04
92 DAILY
5
[
/
] =
∞
[PROG] : EXIT
0
PR +/–
Example: Programme 1 (you have just made) and Programme 4
overlap each other.
START+/–
1
CONFIRM THE OVERLAP-
PING PROGRAMMES
Overlapping programmes blink on the TV screen.
OK
1
SELECT THE PROGRAMME
TO MODIFY
PUSH JOG
Press PUSH JOG %fi, then press OK or PUSH JOG
.
● You can only select one of the overlapping
2
programmes.
NOTE:
If you do not mind this overlap, press PROG to finish
the timer programme setting. The programme with the
lower programme number will be recorded and the
other one will not be recorded correctly. If no changes
are made for approximately 1 minute, the recorder will
return to the normal screen.
CANCEL OR CHANGE
PROGRAMME SETTING
To cancel a programme, press when the Programme
screen you do not want is shown. “PROGRAM
3
COMPLETED” appears on the TV screen for about 5
seconds, then the normal screen appears. To change
a programme, press the appropriate button: START+/-,
STOP +/-, DATE+/-, PR+/- and/or SP/LP/EP (
)
when the Programme screen on which you want to
make changes is shown, then press OK. “PROGRAM
COMPLETED” appears on the TV screen for about 5
seconds, then the normal screen appears.
NOTE:
If the overlap is not yet solved, or another overlap
occurs with the timer programme setting after making
the last correction on a programme, the conflicting
programmes will be shown on the Programme Check
screen again. Repeat the above steps again until the
overlap is solved.
Download from Www.Somanuals.com. All Manuals Search And Download.
TIMER RECORDING (cont.)
24
EN
→
Auto SP LP Timer
Auto Timer
If, when timer-recording in SP mode, there is not enough tape to
record the entire programme, the recorder automatically
switches to LP mode (with PAL broadcasts) or EP mode (with
NTSC broadcasts) to allow complete recording.
For Example . . .
Recording a PAL-broadcast programme of 210 minutes in length
onto a 180-minute tape.
When the Auto Timer is set to ON the timer is automatically
engaged when the recorder power is turned off and automati-
cally disengaged when the recorder is powered back on.
ACCESS MAIN MENU
SCREEN
Approximately 150 minutes
Approximately 60 minutes
Press MENU.
SP mode
LP mode
1
Total 210 minutes
Make sure you set "AUTO SP→LP TIMER" to "ON" at the
Function Set screen before the timer-recording starts.
ACCESS FUNCTION SET
SCREEN
ACCESS MAIN MENU
Press PUSH JOG %fi to
MAIN MENU
place the pointer next to
SCREEN
FUNCTION SET
TUNER SET
INITIAL SET
2
"FUNCTION SET", then
Press MENU.
press OK or PUSH JOG
.
1
[5/ ] =
∞
[MENU] : EXIT
ACCESS FUNCTION SET
SCREEN
SELECT MODE
Press PUSH JOG %fi to place the pointer next to
"FUNCTION SET", then press OK or PUSH JOG
2
Press PUSH JOG %fi to
place the pointer next to
"AUTO TIMER", then press
OK or PUSH JOG to
select either "ON" or
"OFF".
FUNCTION SET
.
B.E.S.T.
ON
AUTO
OFF
3
PICTURE CONTROL
AUTO TIMER
O.S.D.
ON
SELECT MODE
AUTO SP=LP TIMER
OFF
Press PUSH JOG %fi to
FUNCTION SET
[5/ ] =
∞
[MENU] : EXIT
place the pointer next to
B.E.S.T.
ON
3
"AUTO SP→LP TIMER",
then press OK or PUSH
JOG to select "ON".
PICTURE CONTROL
AUTO TIMER
AUTO
OFF
ON
RETURN TO NORMAL
O.S.D.
AUTO SP=LP TIMER
ON
SCREEN
[5/ ] =
∞
[MENU] : EXIT
Press MENU.
4
RETURN TO NORMAL
SCREEN
NOTE:
Press MENU.
For safety, when Auto timer is set to "OFF", all other recorder
functions are disabled while the Timer mode is engaged. To
disengage the timer, press ‰.
4
NOTES:
● If you have programmed the recorder to timer-record 2 or
more programmes, the second programme and those
thereafter may not fit on the tape if you set "AUTO SP→LP
TIMER" to "ON". In this case, make sure the mode is not
engaged, then set the tape speed manually during timer
programming.
● In order to ensure that the recording fits on the tape, this
feature may leave a slight non-recorded section at the end of
the tape.
● There may be some noise and sound disturbance at the point
on the tape where the recorder switches from SP to LP (or EP)
mode.
● The Auto SP→LP Timer feature is not available during ITR
(Instant Timer Recording), and the feature will not work
properly with any tapes longer than E-180 or with some tapes
of shorter lengths.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
25
This facility allows you to automatically record a satellite
program which is timer-programmed on your external satellite
receiver. Connect a satellite receiver to the recorder's rear
AUDIO/VIDEO IN connectors and program the timer on the
satellite receiver; the recorder starts recording when the signals
input from the satellite receiver to the rear AUDIO/VIDEO IN
connectors, and when there is no input signals the recorder
stops recording and the power shuts off.
Automatic Sat-
ellite Program
Recording
Before performing the following steps:
• Program the timer on the satellite receiver.
• Insert a cassette with the safety tab in place.
SET TAPE SPEED
Press SP/LP/EP to set the tape speed.
1
ENGAGE AUTO SATELLITE
PROG REC MODE
LINK indicator lights up and the recorder turns off
automatically.
REC LINC indicator
Press and hold REC LINK for about 2 seconds. The REC
2
● To disengage the Auto Satellite Prog Rec mode, press
REC LINK. The REC LINK indicator goes off.
●If the recorder's power is off, it is not possible to
engage the Auto Satellite Prog Rec mode.
7
8
0
9
4
ATTENTION
● Be sure not to turn on the satellite receiver before the
program is executed; otherwise, the recorder will start
recording when the satellite receiver's power is turned
on.
1
● If you have connected another appliance other than a
satellite receiver to the rear AUDIO/VIDEO IN
connectors, be sure not to engage the Auto Satellite Prog
Rec mode; otherwise, the recorder will start recording
when the connected appliance's power is turned on.
● Auto Satellite Prog recording and timer-recording cannot
be done at the same time.
NOTES:
● Auto Satellite Prog recording is only possible with the rear AUDIO/VIDEO IN connectors.
● When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is
finished, the recorder will not enter the Timer mode even though “AUTO TIMER” is set to “ON”.
● For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.
● Auto Satellite Prog recording is not possible if your satellite receiver does not have a timer.
● The REC LINK indicator blinks while Auto Satellite Prog recording is in progress.
● Pressing the recorder's
button while Auto Satellite Prog recording is in progress turns off and recorder's power and disengages
the Auto Satellite Prog Rec mode.
● If there is more than one satellite program you wish to record with Auto Satellite Prog Recording, it is not possible to set a different
tape speed for each; the tape speed selected in step 1 will apply to all the programs for Auto Satellite Prog recording.
● The B.E.S.T. ( ੬ pg. 18) does not work while Auto Satellite Prog recording is in progress.
● Depending on the type of satellite receiver, the recorder may not record a short portion at the beginning of the program or may
record slightly longer than the actual length of the program.
● If you engage the Auto Satellite Prog Rec mode when the satellite receiver's power is on, the recorder will not start Auto Satellite
Prog recording even though the REC LINK indicator blinks. When the satellite receiver shuts off once and is turned back on again,
the recorder starts recording.
● You can also record a program from your cable system in the same way if the system has a timer and is connected to the recorder's
rear AUDIO/VIDEO IN connectors.
● When you press the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK indicator does not
light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Prog Recording will not work
properly with that satellite receiver*.
If this is the case, perform “Express Timer Programming” ( ੬ pg. 20) to timer-record a satellite program.
* Some satellite receivers output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite receivers.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL FEATURES
26
EN
Remote A/B Code Switching
The remote control is capable of controlling two JVC video
recorders independently; one set to respond to the remote
control's A code control signals and another set to respond to B
code control signals. The remote control is preset to send A
code signals because your video recorder is initially set to
respond to A code signals. You can easily modify your video
recorder to respond to B code signals.
Remote
Control
Functions
REMOVE POWER SUPPLY
Unplug the mains power cord from the mains outlet.
1
SET REMOTE CONTROL
CODE
VCR
While holding down VCR on the remote control, press
1
4
7
2
5
8
3
6
9
NUMBER "1"
the NUMBER key "2" and then press OK.
2
4
2
RE-SUPPLY POWER
Plug the mains power cord back into the mains outlet.
0
3
TURN THE RECORDER ON
only respond to B code signals.
1
Press
on the remote control. The recorder will now
4
NOTE:
OK
To set the recorder back to respond to A code signals, repeat the
same procedure as shown above except pressing NUMBER key
"1" instead of "2" in step 2.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
27
TV Multi-brand Remote
Control
Your remote control can operate the basic functions of your TV set.
In addition to JVC TVs, other manufacturer's TVs can also be
controlled.
VCR
TV/VCR
Before you start . . .
● Turn on the TV using its remote control.
1
4
7
2
5
8
3
6
9
2
4
NUMBER
SET TV BRAND CODE
Refer to the chart below. While holding down TV on
the recorder's remote control, enter your TV's brand
0
1
2
code using the NUMBER keys, then press OK.
Check if the TV's power goes off as it should. If it does,
try other operations (੬ step 2).
● Once you have set the remote control to operate the
TV, you don't have to repeat this step until you
replace your remote control's batteries.
● Some TV brands have more than one code. If the TV
does not function with one code, try entering another.
1
OPERATE TV
OK
First, press TV to set the remote control to TV mode, then
press the corresponding button:
, TV PR +/–,
TV PR+/–
TV
+/–
TV/VCR, TV
BER keys.
+/– (Volume),
(Muting), NUM-
● For some brands of TV, you must press OK after
having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with
JVC televisions, as well as many other models, it may not work
with your TV, or in some instances, may have limited function
capability.
TV BRAND NAME
CODE
ATTENTION
JVC
AIWA
BEIJING
CCE
CHANGHONG
DAEWOO
FERGUSON
FINLUX
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JINXING
KONKA
LG/GOLDSTAR
MITSUBISHI
MIVER
NEC
NOBLEX
NOKIA
PANASONIC
PEONY
01, 23, 24, 25
The remote control can operate not only the video recorder
but also some of your TV's functions.
36
22
● To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode.
● To operate your satellite receiver, cable box or DVD, first
press the CABLE/SAT/DVD to set the remote control to
the satellite receiver, cable box or DVD mode.
02
34
17, 37
27
30
32
15
19
10
28
38
Control Your TV Using
Additional Buttons
40
18
03
Use the NUMBER keys, and the
button, button or ‰
29
button to select the TV's channel.
20
● With televisions under Code 01, 02, 07, 08, 10, 11, 14,
20, 22, 23, 24, 25, 27, 33, 35, 38, 40 or 42, the
22
31
04, 11
34, 38, 39
10, 17, 21
02, 42
12, 33, 34, 35
13, 16
06
button corresponds to the 1-digit/2-digit entry switching
button (often labelled – /– –) of your TV's remote control.
● With televisions under Code 01, 16, 28, 29, 34 or 39, the
button corresponds to the 10 + button, and the ‰ button
corresponds to the 20 + button of your TV's remote control.
PHILICO
PHILIPS
SAMSUNG
SANYO
SHARP
NOTE:
SONY
07
The way these buttons are used is determined by your TV.
Use these buttons as instructed for your TV's remote control.
TCL
41
THOMSON
TOSHIBA
26
08, 14
Download from Www.Somanuals.com. All Manuals Search And Download.
28
EN
Multi-brand Remote Control
For satellite receiver, cable box and DVD
Your remote control can operate the basic functions of your
satellite receiver , cable box or DVD.
Before you start . . .
● Turn on the satellite receiver, cable box or DVD using its
remote control.
VCR
1
4
7
2
5
8
3
6
9
SET BRAND CODE
SAT/DVD on the recorder's remote control, enter one
of the brand code corresponding to the make of your
unit using the NUMBER keys, then press OK.
Check if the unit's power goes off as it should. If it does,
try other operations (੬ step 2).
2
4
NUMBER
Refer to the chart below. While holding down CABLE/
1
2
0
● Once you have set the remote control to operate the
unit, you don't have to repeat this step until you
replace your remote control's batteries.
● Some brands have more than one code. If the unit
does not function with one code, try entering another.
1
REW
FF
OPERATE UNIT
STOP
First, press CABLE/SAT/DVD to set the remote control to
OK
unit mode, then press the corresponding button:
For satellite receiver and cable box . . .
TV PR+/–
@# +/–
, TV PR +/–, NUMBER keys.
For DVD. . .
, PLAY, STOP, PAUSE, FF, REW,
@#(4¢) keys.
● For some brands of unit, you must press OK after
having pressed the NUMBER keys.
IMPORTANT
Although the provided remote control unit is compatible with
JVC satelite receiver and DVD, as well as many other models, it
may not work with your unit, or in some instances, may have
limited function capability.
ATTENTION
The remote control can operate not only the video recorder
but also some of your TV, cable box, satellite receiver and
DVD.
NOTES:
● It's not possible to set the two units at the same time. You can
only set the remote control to operate one of these units at a
time.
● To operate your video recorder, first press the VCR button
to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode.
● To operate your satellite receiver, cable box or DVD, first
press the CABLE/SAT/DVD to set the remote control to
the satellite receiver, cable box or DVD mode.
● You have to subscribe to a satellite or cable service to receive
satellite or cable channels.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
29
DVD Multi-brand Code
Cable Box or Satellite Re-
ceiver Multi-brand Code
DVD BRAND NAME
CODE
JVC
55
58
56
57
CABLE BOX BRAND NAME
CODE
MATSUSHITA
PHILIPS
JVC
AMSTRAD
BT
CANAL+
CANAL SATELLITE
D-box
ECHOSTAR
FINLUX
72, 73,
TOSHIBA
60, 61, 62, 63, 92
72
81
81
85
51, 78, 79, 80, 82
68
GALAXIS
GRUNDIG
HIRSCHMANN
ITT
69, 88
64, 65
64
68
JERROLD
01, 04, 06, 11, 12, 15,
28, 75
70, 71
68
70
68, 87
67, 86, 92
13, 14, 74
69
66, 84
69
68
KATHREIN
LUXOR
MASPRO
NOKIA
PACE
PANASONIC
PFT
PHILIPS
PHONOTREND
SALORA
SKYMASTER
TPS
69
83
VIDEOWAY
WISI
03, 09, 22, 76, 77
64
Download from Www.Somanuals.com. All Manuals Search And Download.
EDITING
30
EN
You can use your video recorder as the source player or the
recording deck.
Edit To Or
From Another
Video
MAKE CONNECTIONS
Connect the player's AUDIO/VIDEO OUT connector to
the recorder's AUDIO/VIDEO IN connector.
1
● Use the L connector for monaural connection.
SET RECORDING DECK'S
INPUT MODE
Set to AUX. With this video recorder, press NUMBER
Recorder
key "0" and/or PR +/ – to "L-1".
2
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
Follow the "Picture Control" section on page 15, then
select "EDIT."
3
START SOURCE PLAYER
Engage its Play mode.
4
START RECORDING DECK
1
4
7
2
5
8
3
6
9
Engage its Record mode.
2
4
5
0
NOTES:
NUMBER "0"
● All necessary cables can be obtained from your dealer.
● When you use this recorder as the player for editing, be sure
to set "O.S.D." to "OFF" before starting (੬ pg. 8).
● NTSC tapes being played back in the NTSC [ PAL mode
(੬ pg. 33) cannot be dubbed to another recorder.
PR +/–
1
● When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button (੬ pg. 32).
● When you select "EDIT" to dub tapes, be sure to select
"AUTO" (or "NORM" when the B.E.S.T. function is set to
"OFF") after you finish dubbing the tapes (੬ pg. 15).
IMPORTANT:
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● For more information on multi-system compatibility,
੬ pg. 32.
TV Receiver
Player
Your recorder
Recorder
Your recorder
TV Receiver
AV Cable
(not provided)
AV Cable
(not provided)
VIDEO
CHANNEL
VIDEO
CHANNEL
RF Cable (provided)
RF Cable
(provided)
Another recorder
Another recorder
Recorder
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
31
You can use a camcorder as the source player and your video
recorder as the recorder.
Edit From A
Camcorder
MAKE CONNECTIONS
Connect the camcorder's AUDIO/VIDEO OUT connec-
tors to the recorder's rear panel AUDIO/VIDEO input
1
connectors.
● Use the L connector for monaural connection.
SET RECORDER'S INPUT
MODE
Press NUMBER key "0" and/or PR +/ – so that "L-1"
appears on the display panel.
2
3
SELECT "EDIT" FOR PICTURE
CONTROL SET MODE
Follow the "Picture Control" section on page 15, then
select "EDIT."
1
4
7
2
5
8
3
6
9
START CAMCORDER
2
4
Engage its Play mode.
4
5
0
NUMBER "0"
START RECORDER
Engage its Record mode.
PR +/–
1
NOTES:
● All necessary cables can be obtained from your dealer.
● You can also use another video recorder as the player instead
of a camcorder.
Recorder
Your recorder
● When you select "EDIT" to dub tapes in step 3, be sure to
select "AUTO" (or "NORM" when B.E.S.T. is set to "OFF") after
you finish dubbing the tapes(੬ pg. 15).
IMPORTANT:
AUDIO IN
VIDEO IN
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● PAL, SECAM and NTSC camcorders can be used as a
player for editing.
AV Cable
(not provided)
● For more information on multi-system compatibility,
੬ pg. 32.
VIDEO OUT
AUDIO OUT
Camcorder
Player
Download from Www.Somanuals.com. All Manuals Search And Download.
INFORMATION ON MULTI-SYSTEM COMPATIBILITY
Setting Of The Colour System Select Buttons
32
EN
Use the COLOUR SYSTEM button on the front panel to select
the colour system. Pressing the COLOUR SYSTEM displays the
current setting on the screen. While the current setting is
displayed, press COLOUR SYSTEM again to change the mode
as illustrated on the left. The On-Screen display will show
which mode is selected.
Mode Display
AUTO
Mode
Description
NTSC 3.58
NTSC 4.43
NTSC PAL*
PAL
AUTO
Usually set to this mode. This mode
automatically detects PAL, NTSC, SECAM
or MESECAM and adjusts to the colour
system being recorded or played back.
When it does not perform properly, set the
colour system manually.
COLOUR SYSTEM
MANUAL
For recording, there is a choice of 4
selectable modes; PAL/MESECAM/NTSC
3.58/NTSC4.43. Select the mode that
matches the colour signal being received.
For playback, there is an additional mode
which allows NTSC tapes to be played
back and viewed on PAL TVs.
MESECAM
* "NTSC[PAL" appears during playback only.
NOTES:
● In the AUTO mode, NTSC signals will be automatically
recorded as NTSC 3.58.
● In the AUTO mode, NTSC tapes will be played back as NTSC
3.58.
● SECAM signals will always be recorded as MESECAM. Select
the AUTO or the MESECAM mode when recording SECAM
signals.
● When playing back a SECAM tape, select the AUTO or
MESECAM mode. The playback picture will always be
monochrome.
● In the NTSC4.43 mode, with some TVs, on-screen displays
(Program screen etc.) may roll up or down and there may be a
loss of colour. When this happens, select the AUTO mode.
Off-Air Recording
The built-in multi-system tuner is capable of receiving PAL B/G, I and D/K, and SECAM B/G and D/K broadcasts.
TV system
HR-J277MS/HR-J271MS
Recorded tape
Recording circuit
PAL
PAL
PAL B/G, I, D/K
Multi-system
tuner
(B/G, I, D/K)
MESECAM
SECAM B/G,
D/K (OIRT)
MESECAM
NOTE:
This model does not operate in BRAZIL (PAL-M) or ARGENTINA (PAL-N).
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
33
Playback
This recorder can play back all 3 types of recorded tape.
Recorded tape
HR-J277MS/HR-J271MS
PAL
Playback circuit
Multi-system receiver
PAL
MESECAM
NTSC
PAL
(B/G, D/K, I, H)
NTSC (M)
Built-in
RFconverter
K, I, G, H
MESECAM
RF OUT
[
NTSC PAL
NTSC 3.58 MHz
Multi-system monitor
Manual switching
Manual switching
PAL
SECAM
NTSC 3.58
NTSC 4.43
NTSC 4.43 MHz
VIDEO OUT
AUDIO OUT
NOTES:
When viewing NTSC tapes on a PAL TV set:
● The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the
part of the video recorder nor the TV.
● The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if
the TV does not have a V-HOLD control.)
● During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.
ATTENTION:
When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system
select switch of the TV is adjusted to the AUTO position. In such a case, set the TV's colour system select switch to the appropri-
ate position which corresponds to the TV system you have selected at the TV System Select screen.
Tape-To-Tape Editing
There are 4 different types of recorded tape, depending on the signal recorded.
Recorded tape
Playback equipment
HR-J277MS/HR-J271MS
Dubbed tape
PAL
PAL
PAL
MESECAM
SECAM
PAL
MESECAM
MESECAM
SECAM
MESECAM
Recording circuit
NTSC 3.58 MHz
NTSC 4.43 MHz
NTSC 3.58 MHz
NTSC 4.43 MHz
NTSC
NTSC
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET
34
EN
Turn on the TV and select the VIDEO channel (or AV mode).
IMPORTANT
Perform the following steps only if auto channel set has not
been set correctly by Auto Set Up function (੬ pg. 6) or if
you have moved to a different area or if a new station starts
broadcasting in your area.
Your recorder needs to memorise all necessary stations in
channel positions in order to record TV programmes. Auto
Channel Set automatically assigns all receivable stations in your
area so that you can call them up with the PR +/ – buttons
without going through any vacant channels.
1
4
7
2
5
8
3
6
9
2
4
Auto Channel Set
0
TURN ON THE RECORDER
PR +/–
Press
.
1
1
ACCESS MAIN MENU
SCREEN
Press MENU.
OK
2
3
MENU
ACCESS TUNER SET
SCREEN
PUSH JOG
%
Press PUSH JOG fi to
MAIN MENU
place the pointer next to
"TUNER SET", then press
FUNCTION SET
TUNER SET
INITIAL SET
OK or PUSH JOG
.
[5/ ] =
∞
[MENU] : EXIT
SELECT AUTO CH SET
MODE
TUNER SET
%
Press PUSH JOG fi to
place the pointer next to
"AUTO CH SET", then
press OK or PUSH JOG
CH EDIT
AUTO CH SET
4
.
[5/ ] =
∞
[MENU] : EXIT
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
35
Manual Channel Set
or Auto Channel Set (੬ pg. 34).
SELECT TV SYSTEM
place the pointer next to
the appropriate TV system
(refer to the table on page
7), then press OK or PUSH
Store channels that were not stored during Auto Set Up (੬ pg. 6)
%
Press PUSH JOG fi to
TV SYSTEM SELECT
B/G
D/K
I
5
6
ACCESS TUNER SET
SCREEN
JOG
.
[5/ ] =
∞
Perform steps 1 – 3 of "Auto Channel Set" on page 32.
[MENU] : EXIT
● Auto Channel Set will
start.
1
CH FRQ SYS
01 150 BG
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
ACCESS CHANNEL LIST
EDIT", then press OK or PUSH JOG
AUTO CH SET
PLEASE WAIT
%
Press PUSH JOG fi to place the pointer next to "CH
.
2
3
4
START
FINISH
[5/ ] = [ ] : DELETE
∞
5
[
/
] =
: EDIT
∞
[MENU] : EXIT
SELECT POSITION
open channel position, then press OK or PUSH JOG
%
Press PUSH JOG fi to place the pointer next to an
.
RETURN TO NORMAL
SCREEN
SELECT BAND
Press MENU.
%
Press PUSH JOG fi to place the pointer next to the
band of your choice, then press OK to initiate Manual
Channel Set.
MANUAL CH SET
PLEASE WAIT
BAND SELECT
VHF L
VHF H
IMPORTANT
VHF L 300MHZ
UHF
● If no sound accompanies the picture or the audio sounds
unnatural on some channels that have been stored by
Auto Channel Set, the TV system setting for those
channels may be incorrect. Select the appropriate TV
system for those channels. ੬ "TV System Selection –
When you see the picture but the audio can't be heard or
sounds unnatural" on page 37.
[5/ ] =
∞
[MENU] : EXIT
[MENU] : EXIT
SET DESIRED STATION
The screen to the right
appears when a station is
detected.
If you do not want to store
the detected station...
STORE
● Since your video recorder memorizes all detected stations
even if the reception condition is poor, some of those
stored stations may produce a noisy picture. To delete
those stations, ੬ "Delete A Channel" on page 36.
5
CONTINUE
%
Press PUSH JOG fi to
place the pointer next to
"CONTINUE", then press
[5/ ] =
∞
[MENU] : EXIT
Major Countries/Areas
TV System
OK or PUSH JOG
Channel search will resume.
If you want to store the detected station...
.
Australia, New Zealand, Kuwait, U.A.E.,
Indonesia, Singapore, Thailand, Malaysia,
Iran, Saudi Arabia, Egypt, Morocco,
Lebanon, Iraq
%
Press PUSH JOG fi to place the pointer next to
B/G
"STORE", then press OK or PUSH JOG . The Channel
List appears again.
● The blueback screen and the TV picture currently
being broadcast appear alternately for 8 seconds each.
● If you want to store another channel, repeat steps 3 – 5.
● When channel search completes for that band, the
Band Select screen appears again. To set channels for
other bands, select another band and start Manual
Channel Set again (੬ step 4 and 5).
China, Mongolia, Russia
Hong Kong
D/K
I
● For fine tuning adjustment, see "Fine-Tuning
Channels" on page 37.
RETURN TO NORMAL
SCREEN
Press MENU.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNER SET (cont.)
36
EN
Delete A Channel
Swap Channel Positions
Example:To swap CH03 and CH09.
ACCESS TUNER SET
ACCESS TUNER SET
SCREEN
Perform steps 1 – 3 of "Auto Channel Set" on page 34.
SCREEN
Perform steps 1 – 3 of "Auto Channel Set" on page 32.
1
1
ACCESS CHANNEL LIST
Press PUSH JOG %fi to place the pointer next to "CH
ACCESS CHANNEL LIST
EDIT", then press OK or PUSH JOG
.
Press PUSH JOG %fi to place the pointer next to "CH
2
3
EDIT", then press OK or PUSH JOG
.
2
3
SELECT CHANNEL
until the channel you want
to delete begins blinking.
Press PUSH JOG %fi to
CH FRQ SYS
01 150 BG
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
SELECT POSITION (e.g. 03)
Press PUSH JOG %fi until
CH FRQ SYS
01 150 BG
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
[0 – 9]: INPUT CH
: FINE TUNING
[MENU] : EXIT
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
the section of CH "03"
begins blinking, then press
OK or PUSH JOG
.
[5/ ] = [ ] : DELETE
∞
[5/ ] =
: EDIT
∞
● Only "03" will blink.
[MENU] : EXIT
DELETE CHANNEL
Press
.
CH FRQ SYS
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
SELECT POSITION (e.g. 09)
input "0" and "9".
01 – – – – –
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
Press NUMBER keys to
CH FRQ SYS
01 150 BG
02 165 BG
03 355 BG
04 205 BG
05 213 BG
06 221 BG
CH FRQ SYS
07 229 BG
08 237 BG
09 195 BG
10 365 BG
11 374 BG
12 384 BG
● To re-store it, simply
4
5
press PUSH JOG
.
4
● Repeat steps 3 – 4 as
necessary.
● The two selected
channels will be
5
[
/ ] = [ ] : ADD
∞
swapped.
[MENU] : EXIT
[
]: CANCEL
: OK
● To cancel the channel
swapping, press PUSH
[MENU] : EXIT
JOG
.
RETURN TO NORMAL
SCREEN
STORE NEW POSITIONS
Press MENU.
Press OK or PUSH JOG
.
● Repeat steps 3 – 5 as necessary.
5
6
RETURN TO NORMAL
SCREEN
Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
37
Fine-Tuning Channels
TV System Selection – When
you see the picture but the
audio can't be heard or
sounds unnatural
ACCESS TUNER SET
SCREEN
Perform steps 1 – 3 of "Auto Channel Set" on page 32.
ACCESS TUNER SET
1
SCREEN
ACCESS CHANNEL LIST
Perform steps 1 – 3 of "Auto Channel Set" on page 32.
Press PUSH JOG %fi to place the pointer next to "CH
EDIT", then press OK or PUSH JOG
.
1
2
ACCESS CHANNEL LIST
SELECT CHANNEL TO
FINE-TUNE
Press PUSH JOG %fi to place the pointer next to "CH
EDIT", then press OK or PUSH JOG
.
2
3
Press PUSH JOG %fi until
CH FRQ SYS
01 150 BG
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
the channel you want to
02 165 BG
SELECT CHANNEL
3
tune begins blinking, then
03 195 BG
04 205 BG
05 213 BG
06 221 BG
press OK twice.
Press PUSH JOG %fi until
CH FRQ SYS
01 150 BG
02 165 BG
03 195 BG
04 205 BG
05 213 BG
06 221 BG
CH FRQ SYS
07 229 BG
08 237 BG
09 355 BG
10 365 BG
11 374 BG
12 384 BG
the channel you want to
change its TV system
begins blinking, then press
OK three times.
● The "FRQ" number for
that channel starts
blinking.
5
[
/ ] : FINE TUNING
∞
: SELECT SYSTEM
[MENU] : EXIT
5
[
/
∞
] : SELECT SYSTEM
: OK
[MENU] : EXIT
● The "SYS" display for
that channel starts
blinking.
PERFORM TUNING
Press PUSH JOG %fi until the picture becomes clearer,
then press OK or PUSH JOG
.
4
5
SELECT TV SYSTEM
● Repeat steps 3 and 4 as necessary.
Press PUSH JOG %fi to select the appropriate TV
system (BG [ DK [ I). Then press OK or
RETURN TO NORMAL
4
5
PUSH JOG
.
SCREEN
● Repeat steps 3 and 4 as necessary.
Press MENU.
RETURN TO NORMAL
SCREEN
Press MENU.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
38
EN
Before requesting service for a problem, use this chart and see if you can repair the trouble yourself. Small problems are often easily
corrected, and this can save you the trouble of sending your video recorder off for repair.
POWER
SYMPTOM
1. No power is applied to the
recorder.
POSSIBLE CAUSE
● The mains power cord is discon-
nected.
CORRECTIVE ACTION
Connect the mains power cord.
2. The clock is functioning properly,
but the recorder cannot be
powered.
● "‰" is displayed on the display panel
with Auto Timer set to "OFF".
Press the ‰ button to turn the "‰"
indicator off.
3. The remote control won't function.
● The batteries are discharged.
Replace the dead batteries with new ones.
TAPE TRANSPORT
SYMPTOM
1. The tape does not run during
recording.
POSSIBLE CAUSE
● " " is displayed on the display
panel.
CORRECTIVE ACTION
Press PLAY to turn the " " indicator
off.
2. The tape will not rewind or fast-
forward.
● The tape is already fully rewound or
fast-forwarded.
Check the cassette.
PLAYBACK
SYMPTOM
1. The playback picture does not
appear while the tape is running.
POSSIBLE CAUSE
● If you're using the RF OUT connec-
tion . . .
CORRECTIVE ACTION
If you are using the RF OUT connec-
tion . . .
. . . the TV receiver's channel selector
is not set to the VIDEO channel.
. . . the recorder's VIDEO channel
has not been correctly set.
● If you're using the AV connection, the
TV receiver is not set to the AV mode.
. . . set the TV receiver to the VIDEO
channel. (੬ pg. 4)
. . . Perform "Video Channel Set"
(੬ pg. 4)
If you are using the AV connection,
set the TV to its AV mode.
2. Noise appears during visual
search.
● This is normal.
3. Noise appears during normal
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 13)
4. Noise appears during slow-motion
playback.
● The automatic tracking mode is
engaged.
Try manual tracking. (੬ pg. 13)
5. Noise appears during still
playback.
Press PR + or – a few times to remove
the noise bars from the screen.
6. The playback picture is blurred or
interrupted while TV broadcasts
are clear.
● The video heads may be dirty.
Use a dry cleaning cassette TCL-2UX
or consult your JVC dealer.
7. Playback picture has a loss of
colour.
● The wrong colour system is selected
Select the correct colour system by
pressing the COLOUR SYSTEM
button. (੬ pg. 32)
Once recorded, the signal cannot be
corrected. Be sure to choose the
correct setting before recording.
for the tape being played back.
● The wrong colour system was
selected during recording.
8. No sound accompanies the
playback picture.
● The TV system you have selected at
the TV System Select screen is
incorrect.
Set it to the correct position for the TV
broadcast system used in your area.
(੬ pg. 37)
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
39
RECORDING
SYMPTOM
1. Recording cannot be started.
POSSIBLE CAUSE
● There is no cassette loaded, or the
cassette loaded has had its Record
Safety tab removed.
CORRECTIVE ACTION
Insert a cassette, or using adhesive
tape, reseal the slot where the tab
was removed.
2. TV broadcasts cannot be recorded.
3. Tape-to-tape editing is not possible.
● "L-1" has been selected as the input
Set to the desired channel.
mode.
● The source (another video recorder,
camcorder) has not been properly
connected.
Confirm that the source is properly
connected.
● All necessary power switches have
not been turned on.
● The input mode is not correct.
Confirm that all units' power switches
are turned on.
Set the input mode to "L-1".
4. Camcorder recording is not
possible.
● The camcorder has not been
properly connected.
● The input mode is not correct.
Confirm that the camcorder is
properly connected.
Set the input mode to "L-1".
TIMER RECORDING
SYMPTOM
1. Timer recording won't work.
POSSIBLE CAUSE
● The clock and/or the timer have
been set incorrectly.
● The timer is not engaged.
CORRECTIVE ACTION
Re-perform the clock and/or timer
settings.
Press ‰ and confirm that "‰" is
displayed on the display panel.
● Timer recording is in progress.
2. On-screen timer programming is
not possible.
Timer programming can't be
performed while a timer recording is
in progress. Wait until it finishes.
● The timer is engaged but there's no
cassette loaded.
3. "‰" and "]" on the display panel
Load a cassette with the Record
Safety tab intact, or cover the hole
using adhesive tape.
won't stop blinking.
● The loaded cassette has had its
Record Safety tab removed.
4. The cassette is automatically
ejected, and "‰" and "]" on the
display panel won't stop blinking.
Remove the cassette and cover the
hole with adhesive tape, or insert a
cassette with the Record Safety tab
intact.
● ‰ has been pressed when there are
no programs in memory, or the timer
record information has been
5. "‰" blinks for 10 seconds and the
Check the programmed data and re-
program as necessary, then press ‰
again.
Timer mode is disengaged.
programmed incorrectly.
● The end of the tape was reached
during timer recording.
6. The cassette is automatically
ejected, the power shuts off and
"‰" and "]" won't stop blinking.
The programme may not have been
recorded in its entirety. Next time
make sure you have enough time on
the tape to record the entire
programme.
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING (cont.)
40
EN
OTHER PROBLEMS
SYMPTOM
1. Whistling or howling is heard from
the TV during camcorder record-
ing.
POSSIBLE CAUSE
● The camcorder's microphone is too
close to the TV.
● The TV's volume is too high.
CORRECTIVE ACTION
Position the camcorder so its
microphone is away from the TV.
Turn the TV's volume down.
2. When scanning channels, some of
them are skipped over.
● Those channels have been desig-
nated to be skipped.
If you need the skipped channels,
restore them. (੬ pg. 35)
3. The channel cannot be changed.
● Recording is in progress.
Press PAUSE to pause the recording,
change channels, then press PLAY to
resume recording.
4. Channel settings that were made
manually seem to have changed or
disappeared.
● After the manual settings were
made, Auto Channel Set was
performed.
Perform manual setting again.
5. No channels are stored in the
recorder's memory.
● The TV aerial cable was not
connected to the recorder when
Auto Set Up was performed.
Connect the TV aerial cable to the
recorder properly and turn off the
recorder power once, then turn the
recorder power back on again. The
recorder will try Auto Set Up again.
(੬ pg. 6)
6. "– –:– –" is displayed on the front
display panel after a power outage.
● The lithium battery is exhausted.
Replace the lithium battery with a
new one. (੬ pg. 5)
Download from Www.Somanuals.com. All Manuals Search And Download.
QUESTIONS AND ANSWERS
EN
41
PLAYBACK
RECORDING
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the beginning.
Q. When I pause and then resume a recording, the end
of the recording before the pause is overlapped by
the beginning of the continuation of recording. Why
does this happen?
A. This is normal. It reduces distortion at the pause and
resume points.
Q. Can the video recorder indefinitely remain in the
still mode?
A. No. It stops automatically after 5 minutes to protect
the heads.
Q. Can the video recorder indefinitely remain in the
Record-Pause mode?
A. No. The video recorder goes to its Stop mode auto-
matically after 5 minutes to protect the heads.
Q. During search, slow, still and frame-by-frame
playback, I can't hear any audio. What's the
problem?
A. This is normal.
Q. What happens if the tape runs out during recording?
A. The video recorder automatically rewinds it to the
beginning.
Q. When returning from multi-speed search to normal
playback, the picture is disturbed. Should I be
concerned about this?
TIMER RECORDING
A. No, it is normal.
Q. " " and "‰" remain lit on the display panel. Is there
a problem?
Q. Noise bars appear during multi-speed search. What's
the problem?
A. This is normal.
A. No. This is a normal condition for a timer recording in
progress.
Q. Can I program the timer while I'm watching a tape
or a TV broadcast?
A. You won't see the picture as it is replaced by the on-
screen menu, but the audio from the program or tape
you're viewing can be heard.
Q. Other than preventing further recording, what effect
does removing the Record Safety tab have?
A. It disables marking of index codes.
Q. Sometimes, during Index Search, the video recorder
can't find the programme I want to see. Why not?
A. There may be index codes too close together.
Q. Is it possible to timer-record a TV programme
broadcast in 2000?
A. Yes, it is possible.
ATTENTION:
This recorder contains microcomputers. External electronic noise or interference could cause malfunctioning. In such cases,
switch the recorder off and unplug the mains power cord. Then plug it in again and turn the recorder on. Take out the cassette.
After checking the cassette, operate the unit as usual.
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
42
EN
FRONT VIEW
1
2
3
4
5
STANDBY/ON
COLOUR SYSTEM
REC LINK
REVIEW
SP
PR
SP/LP/EP
7
@
6
8
9
0
!
# $
%
1 STANDBY/ON
Button ੬ pg. 8
9 Display Panel ੬ pg. 43
2 Cassette Loading Slot
0 Infrared Beam Receiving Window
! PR +/– Buttons ੬ pg. 17
@ SP/LP/EP Button ੬ pg. 17
# RECORD Button ੬ pg. 17
$ STOP/EJECT Button ੬ pg. 11
% PAUSE Button ੬ pg. 12
3 Rewind [REW] Button ੬ pg. 11, 12
4 PLAY Button ੬ pg. 11
5 Fast Forward [FF] Button ੬ pg. 11, 12
6 REC LINK Button ੬ pg. 25
7 REC LINK indicator ੬ pg. 25
8 COLOUR SYSTEM Button ੬ pg. 32
REAR VIEW
2
3
1
ANT. IN
RF OUT
IN
OUT
AUDIO
VIDEO
4 5 6
1 Mains Power Cord ੬ pg. 3
2 Lithium Battery Compartment ੬ pg. 5
3 ANT. IN Connector ੬ pg. 3
4 AUDIO/VIDEO IN Connectors ੬ pg. 30
5 AUDIO/VIDEO OUT Connectors ੬ pg. 3, 30
6 RF OUT Connector ੬ pg. 3
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
43
DISPLAY PANEL
1
2
3
4
6
5
SP
7
8
1 B.E.S.T. Picture System Display ੬ pg. 18
2 Symbolic Mode Indicators
5 Channel Display
Clock Display
6 "Cassette Loaded" Mark
7 Counter Display
8 Mode Display (L-1)
STILL:
SLOW:
PLAY:
FF/REW VARIABLE
SHUTTLE SEARCH:
RECORD:
RECORD PAUSE:
3 Tape Speed Indicators ੬ pg. 16
4 "Timer" Indicator ੬ pg. 21
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX (cont.)
44
EN
1 TV Button ੬ pg. 27
REMOTE CONTROL
2 VCR Button ੬ pg. 27
3 TV/VCR Button ੬ pg. 27
4 REVIEW Button ੬ pg. 13
5 NUMBER Keys ੬ pg. 16
&
*
1
2
3
4
5
6 VSP/PDC Button (no function)
CABLE/
SAT/DVD
VCR
TV
(
7
Button Button ੬ pg. 22
0000 Button ੬ pg. 17
TV/VCR
AUDIO
)
q
w
e
r
t
y
u
i
o
p
Q
W
8 STOP +/– Button ੬ pg. 20
9 START +/– Button ੬ pg. 20
0 PROG Button ੬ pg. 20
1
2
5
3
6
2
4
4
6
! ‰? Button ੬ pg. 22
VPS/PDC
DAILY/QTDN. WEEKLY/HEBDO
7
0000
8
AUX
0
9
@ Rewind [REW] Button ੬ pg. 11, 12
# RECORD Button ੬ pg. 16
$ STOP Button ੬ pg. 11
7
8
% MENU Button ੬ pg. 8
START
DEBUT
STOP
FIN
DATE
PR
9
^ PUSH JOG %fi Button ੬ pg. 6
EXPRESS
TV PR +/– Button ੬ pg. 27
1
PROG
30 SEC
0
!
@
#
$
%
^
& CABLE/SAT/DVD Button ੬ pg. 27
* STANDBY/ON
Button ੬ pg. 8
( AUDIO Button (no function)
(TV Muting) Button ੬ pg. 27
) – –:– – Button ੬ pg. 17
q DAILY Button ੬ pg. 21
w WEEKLY Button ੬ pg. 21
e AUX Button ੬ pg. 26
TV PR +
r ‰ Button ੬ pg. 21
TV PR –
E
t DATE +/– Button ੬ pg. 20
y PR +/– Button ੬ pg. 16, 20
u 30 SEC Button ੬ pg. 14
i SP/LP/EP Button ੬ pg. 16
o PLAY Button ੬ pg. 11
p Fast Forward [FF] Button ੬ pg. 11, 12
Q PAUSE Button ੬ pg. 12
W OK Button ੬ pg. 4
Buttons with a small dot on the left side of the name can also
be used to operate your TV ੬ pg. 27.
ENTER/ENTREE Button
E PUSH JOG
(™£) Button ੬ pg. 12, 14
TV
+/– Button ੬ pg. 27
How To Use
NOTES:
The remote control can operate most of your video recorder's
functions, as well as basic functions of TV, cable box, satellite
receiver and DVD sets of JVC and other brands. ੬ pg. 27.
● Point the remote control toward the sensor window.
● The maximum operating distance of the remote control is
about 8 m.
● When inserting the batteries, be sure to insert in the correct
directions as indicated under the battery cover.
● If the remote control doesn't work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
ATTENTION
The remote control can operate not only the video recorder but also some of your TV, cable box, satellite receiver and DVD
functions.
● To operate your video recorder, first press the VCR button to set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the remote control to the TV mode (੬ pg. 27).
● To operate your satellite receiver, cable box or DVD, first press the CABLE/SAT/DVD to set the remote control to the satellite
receiver, cable box or DVD mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
EN
45
GENERAL
TUNER/TIMER
Power requirement
TV channel storage
capacity
Tuning system
Channel coverage
Rating
: AC 110 V – 240 V`,
: 99 positions (+AUX position)
: Frequency synthesized tuner
: VHF
(Low) 42 MHz – 175 MHz
(High)175 MHz – 470 MHz
UHF
50/60 Hz
Operating
: AC 90 V – 260 V`,
50/60 Hz
: 14 W
Power consumption
Temperature
Operating
: 5°C to 40°C
470 MHz – 870 MHz
: UHF channels (Adjustable
E28 – E60)
Storage
: –20°C to 60°C
: Horizontal only
: 360 mm x 94 mm x 278 mm
: 3.1 kg
Aerial output
Operating position
Dimensions (WxHxD)
Weight
Memory backup time
: Approx. 6 months
Estimated figure based on
supplied fresh battery; actual
performance may differ.
Format
Maximum recording time
(SP)
: VHS standard
: 240 min. with E-240 video
cassette (PAL/MESECAM)
: 160 min. with T-160 video
cassette (NTSC)
: 480 min. with E-240 video
cassette (PAL/MESECAM)
: 480 min. with T-160 video
cassette (NTSC)
ACCESSORIES
Provided accessories
: RF cable,
Infrared remote control unit,
"R6/UM-3" battery x 2,
Lithium battery CR2025
(LP)
(EP)
Specifications shown are for SP mode unless otherwise
specified.
Design and specifications subject to change without notice.
VIDEO/AUDIO
Signal system
: PAL-type colour signal and
CCIR monochrome signal,
625 lines 50 fields
: NTSC colour and EIA
monochrome signals,
525 lines/60 fields
: Rotary 2 head helical scan
system
Recording system
Signal-to-noise ratio
Horizontal resolution
: 45 dB
: 250 lines (PAL/MESECAM)
: 220 lines (NTSC)
: 70 Hz to 10,000 Hz
: RCA connectors
Frequency range
Input/Output
(IN x 1, OUT x 1)
**MOISTURE CONDENSATION
Moisture in the air will condense on the recorder when you
move it from a cold place to a warm place, or under
extremely humid conditions—just as water droplets form in
the surface of a glass filled with cold liquid. Moisture
condensation on the head drum will cause damage to the
tape. In conditions where condensation may occur, keep
the recorder turned on for a few hours to let the moisture
dry.
**ABOUT HEAD CLEANING
Accumulation of dirt and other particles on the video heads
may cause the playback picture to become blurred or
interrupted. Be sure to contact your nearest JVC dealer if
such troubles occur.
Auto Head Cleaner
A built-in head cleaner automatically cleans the video
heads and head drum whenever a tape is loaded or
unloaded to reduce head clogging.
Download from Www.Somanuals.com. All Manuals Search And Download.
EN
®
VICTOR COMPANY OF JAPAN, LIMITED
® Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.
COPYRIGHT © 2000 VICTOR COMPANY OF JAPAN, LTD.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Malaysia
0600IYV*YP*PJ
MS
|