JVC Stereo System CA MXDK11 User Manual

COMPACT COMPONENT SYSTEM

CA-MXDK11

INSTRUCTIONS

GVT0205-001A

[UN,UG,UX,A,UW]

Download from Www.Somanuals.com. All Manuals Search And Download.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1. Front:

No obstructions and open spacing.

2. Sides/ Top/ Back: No obstructions should be placed in the areas shown by the dimensions below.

3. Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height

of 10 cm or more.

The minimal clearance is shown as below:

Wall or obstructions

Front

No obstructions

[European Union only]

G-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Precautions

Installation

• Install the System in a location with adequate ventilation to

prevent internal heat buildup in the System.

Playable Disc Types

DO NOT install the System in a location near

heat sources, or in a place subject to direct

sunlight, excessive dust or vibration.

DVD Logo is a trademark of DVD Format/Logo Licensing

Corporation.

• Install in a place which is level, dry and neither too hot nor

too cold—between 5°C and 35°C.

• Leave sufficient distance between the System and the TV.

• Keep the speakers away from the TV to avoid interference

with the TV.

• CD-R/-RW/-ROM: Recorded in the Audio CD(CD-DA),

Video CD and SVCD formats. MP3, WMA, JPEG,

MPEG-1 and MPEG-2 files written in accordance with

the “ISO 9660” format can also be played.

Power sources

• When unplugging the System from the wall outlet, always

pull on the plug, not the AC power cord.

• DVD-R/-RW: Recorded in the DVD Video format or the

DVD Video Recording (VR) format. MP3, WMA, JPEG,

MPEG-1 and MPEG-2 files written in the UDF-Bridge

format can also be played.

DO NOT handle the AC power cord with wet

hands.

In addition to the above discs, this System can play back

audio data recorded on CD Text, and CD-Extra.

• It is possible to play back finalized +R/+RW (DVD Video

format only) discs. “DVD” lights on the front display panel

when a +R/+RW disc is loaded.

• The following discs cannot be played back:

DVD-ROM, DVD-RAM, CD-I (CD-I Ready), CD-G (CD

Graphics), Photo CD, etc.

Moisture condensation

Moisture may condense on the lenses inside the System in

the following cases:

• After starting to heat the room

• In a damp room

• If the System is brought directly from a cold to a warm

place.

Should this occur, the System may malfunction. In this case,

leave the System turned on for a few hours until the moisture

evaporates, unplug the AC power cord, then plug it in again.

Playing back these discs will generate noise and damage

the speakers.

• This unit cannot play back DVD-VR discs with CPRM

(Content Protection for Recordable Media).

• In this manual, “file” and “track” are interchangeably used

for MP3/WMA/JPEG/MPEG-1/MPEG-2 operations.

About color system

Internal heat

• Make sure there is good ventilation around the unit. Poor

ventilation could overheat and damage the unit.

This System accommodates both NTSC and PAL system

and can play back discs recorded with either system.

To change the color system, see page 6.

DO NOT block the ventilation openings or

holes. If they are blocked by a newspaper or

cloth, etc., the heat may not be able to get out.

Note on Region Code

DVD players and DVDs have their own Region Code

numbers. This System can play back only DVDs with

Region Code numbers including “4” for Australia and

Central and South America, “3” for Southeast Asia, and “2”

for the Middle East. For your available Region code, check

the rear panel of your main unit.

Others

• Should any metallic object or liquid fall into the System,

unplug the AC power cord and consult your dealer before

operating any further.

DO NOT disassemble the System since there

are no user serviceable parts inside.

EX.: For Southeast Asia

• If you are not going to operate the System for an extended

period of time, unplug the AC power cord from the wall

outlet.

If anything goes wrong, unplug the AC power cord and

consult your dealer.

If a DVD with the improper Region Code numbers is loaded,

“REGION ERR” appears on the display and playback will

not start.

Download from Www.Somanuals.com. All Manuals Search And Download.

The System can play back the following digital audio

formats.

Contents

•

LPCM (Linear PCM),

DTS (Digital Theater Systems)

DIGITAL (Dolby Digital),

Connections .............................................................3

Preparing the Remote Control ............................................ 6

Changing the Color System ............................................... 6

Canceling the Demonstration ............................................. 6

Caution for DualDisc playback

The Non-DVD side of a “DualDisc” does not comply with

the “Compact Disc Digital Audio” standard. Therefore, the

use of Non-DVD side of a DualDisc on this product may not

be recommended.

Display Indication ...................................................7

Daily Operations—Playback .................................8

Daily Operations—Sound & Other Adjustments .... 12

Reinforcing the Bass Sound ............................................. 12

Presetting Automatic DVD Video Sound

Increase Level .............................................................. 12

Creating 3-dimensional Sound Field—3D Phonic ........... 13

Selecting the Sound Modes .............................................. 13

Creating Your Own Sound Modes—User Mode ............. 13

Changing the Picture Tone ............................................... 14

Changing the Display Brightness ..................................... 14

Setting the Clock .............................................................. 14

IMPORTANT: Before playing a disc, make sure of

the following...

• Turn on the TV and select an appropriate input mode on

the TV to view the pictures or on-screen displays on the

TV screen.

• For disc playback, you can change the initial setting to

your preference. See “Setup Menu Operations” on

page 34.

If “

” appears on the TV screen when you press a

button, the disc cannot perform the operation you have

tried to do, or data required for that operation is not

recorded on the disc.

Unique DVD/VCD Operations ............................15

Selecting the Sound Track ................................................ 15

Selecting the Subtitle Language........................................ 16

Selecting the View Angle ................................................. 16

Special Picture Playback................................................... 17

How to Read This Manual

• Button and control operations are explained in the table

below.

Advanced Disc Operations ...................................18

Programming the Playing Order—Program Play ............ 18

Playing at Random—Random Play ................................. 19

Playing Repeatedly .......................................................... 20

Prohibiting Disc Ejection—Child Lock ........................... 20

•

Some related tips and notes are explained later in the

sections “Learning More about This System” and

“Troubleshooting,” but not in the same section

explaining the operations (

indicates that the

content has some information).

On-Screen Bar Operations ..................................21

Recording Operations ..........................................26

Indicates that you press the button briefly

Enjoying Karaoke .................................................28

Singing Along (Karaoke).................................................. 28

Adjusting the key (disc playback only) ............................ 29

Applying an echo to your voice ....................................... 29

Singing Along Using Stereo Discs—Vocal Masking....... 29

Microphone Mixing .......................................................... 30

Reserving Karaoke Songs—Karaoke Program Play......... 31

Indicates that you press the button briefly

and repeatedly until an option you want is

selected.

Indicates that you press one of the buttons.

Indicates that you press and hold the button

for a specified period.

The number inside the arrow indicates the

time to hold (in the example, 2 seconds).

2 sec.

Timer Operations .................................................32

Setup Menu Operations .......................................34

Operating the TV ..................................................36

Indicates that you turn the control toward the

specified direction(s).

Additional Information ........................................37

Learning More about This System ................................... 37

Troubleshooting ............................................................... 40

Maintenance ..................................................................... 41

Specifications ................................................................... 42

OPTICAL DIGITAL OUTPUT Signals .......................... 43

Indicates that this operation is only possible

using the remote control.

Indicates that this operation is only possible

using the buttons and controls on the main

unit.

Parts Index ............................................................44

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Supplied Accessories

• FM antenna (1)

• AM loop antenna (1)

Do not connect the AC power cord until all other

connections have been made.

• Connect VIDEO OUT directly to the video input of your

TV. Connecting VIDEO OUT to a TV via a VCR may cause

a monitor problem when playing back a copy-protected disc.

You may also have a monitor problem when connecting the

player to an integrated TV/Video system.

• Composite video cord (1)

• Remote control (1)

• Batteries (2)

• AC plug adaptor (1) (not supplied for the Middle East

and Australia)

If any item is missing, consult your dealer immediately.

~ From AM/FM antenna

See page 4.

ŸFrom the video input of TV/monitor

See page 4.

!From the digital input of digital audio

component such as CD recorder, etc.

See page 4.

From auxiliary equipment

See page 5.

@From speakers

See page 5.

¤Voltage Selector

Before plugging in, confirm the position

the voltage selector points to. See page 6

and the back cover.

#To a wall outlet

Plug in the AC power cord only after all connections are complete.

• Before plugging in, confirm the position the voltage selector points

to. See page 6 and the back cover.

• If the wall outlet does not match the AC plug, use the supplied AC

plug adaptor (not supplied for the Middle East and Australia).

Download from Www.Somanuals.com. All Manuals Search And Download.

~ AM/FM antenna

Ÿ TV/monitor

To assemble the AM loop antenna

Composite video

cord (supplied)

To connect AM/FM antenna

S-video cord

(not supplied)

FM antenna (supplied)

• Connect the VIDEO jack or S-VIDEO jack whichever

you want to use. If your TV is equipped with the S-

VIDEO input jack, S-VIDEO connection gives you

better quality pictures.

Extend it so that you can

obtain the best reception.

• To select the video output to match the color system of your

TV (PAL or NTSC), see page 6.

AM loop antenna

(supplied)

! Digital audio component

Turn it until the best

reception is obtained.

For better FM reception

Protective cap

FM outdoor antenna

(not supplied)

• Set “DIGITAL AUDIO OUTPUT” in the “AUDIO”

preference display correctly according to the connected

digital audio equipment (see page 35).

Digital audio signals are output from this System only when

“DVD/CD” is selected as the source.

AM loop antenna (supplied)

Keep it connected.

• Disconnect the supplied FM antenna, and connect to an

outdoor FM antenna using a 75

connector (IEC or DIN45325).

Ω

wire with coaxial type

• Make sure the antenna conductors do not touch any other

terminals, connecting cords or the power cord. Also, keep

the antennas away from metallic parts of the System,

connecting cords, and the AC power cord. This could cause

poor reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Auxiliary equipment

@ Speakers

• When connecting the speaker cords, match the polarity of

the speaker terminals: (+) to (+) and (–) to (–).

Red

Stereo audio cord

(not supplied)

White

For the Australian model

From right

speaker

From left

speaker

•

Use only speakers with the same speaker impedance as

indicated by the speaker terminals on the rear of the unit

• The speakers are magnetically shielded to avoid color

distortions on TVs. However, if not installed properly, it

may cause color distortions. So, pay attention to the

following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s

main power switch or unplug it before installing the

speakers.

Stereo mini plug

(not supplied)

Then wait at least 30 minutes before turning on the TV’s

main power switch again.

Some TVs may still be affected even though you have

followed the above. If this happens, move the speakers away

from the TV.

• DO NOT connect more than one speaker to

each terminal.

• DO NOT push or pull the speakers as this

will damage the foot spacers at the bottom

of the speakers.

Download from Www.Somanuals.com. All Manuals Search And Download.

¤ Voltage Selector

Use a screwdriver to rotate the voltage selector so that the

voltage mark is pointing to the same voltage as where you

are plugging in the unit. (See also the back cover page.)

If the range or effectiveness of the remote control decreases,

replace both batteries.

Caution

Do not expose batteries to heat or flame.

When your mains lead (AC) When your mains lead (AC)

line voltage is 230-240 V

line voltage is 220 V

Changing the Color System

You can select the video output to match the color system of

your TV (PAL or NTSC).

1 Enter the color system setting mode.

(While holding...)

Voltage mark

2 Select the color system.

When your mains lead (AC) When your mains lead (AC)

line voltage is 110 V line voltage is 127 V

3 Store the setting.

Canceling the Demonstration

When you plug in the AC power cord to a wall outlet, the

System automatically starts the display demonstration.

Voltage mark

DO NOT plug in before setting the voltage

selector on the rear of the unit and all

connection procedures are complete.

2 sec.

Preparing the Remote Control

To start the demonstration, select DEMO START.

When using the remote control

Point the top of the remote control toward the remote sensor

as directly as possible. If you operate it from a diagonal

position, the operating range (approx. 5 m) may be shorter.

Download from Www.Somanuals.com. All Manuals Search And Download.

Display Indication

The indications on the display tell you a lot of things while you are operating the System.

Before operating the System, be familiar with when and how the indicator illuminates on the display.

1 DVD LEV. 1/2/3 indicators

9 Source signal indicators

• Lights to indicate the DVD increase level (see page 12)

2 MIC indicator

• Lights when the Karaoke mode is activated (see page 28).

33D PHONIC indicator

• Lights when 3D Phonic is activated (see page 13).

4 V.MASK indicator

•

D: lights when a source signal is Dolby Digital.

• DTS: lights when a source signal is DTS.

pTape operation indicators

• REC: lights while recording (see pages 26 and 27).

• TAPE-A: lights when TAPE-A is selected.

• TAPE-B: lights when TAPE-B is selected.

• Lights when the Vocal Masking mode is activated (see

page 29).

5 RESUME indicator

• Lights when the Resume function is activated (see

page 10).

•

23(tape direction):

–Lights to indicate the current tape running direction.

–Flashes slowly during playback and recording.

–Flashes quickly while rewinding a tape.

qMain display

6 SOUND TURBO indicator

wMP3 indicator

• Lights when SOUND TURBO II is activated (see

page 12).

• Lights while playing back an MP3 track.

eWMA indicator

7 SURROUND indicator

• Lights while playing back a WMA track.

rRepeat Mode indicators

• REP: lights when Repeat Play mode is activated.

• 1: lights when One Track/Chapter/Step Repeat is

activated.

tPRGM indicator

• Lights when Program Play mode is activated.

yRND indicator

• Lights when Surround mode is activated (see page 13).

8 Timer indicators (see pages 32 and 33)

• SLEEP: flashes when the Sleep Timer is activated.

• DAILY: lights when the Daily Timer is on standby;

flashes while working or being set.

• REC: lights when the Recording Timer is on standby;

flashes while working or being set.

•

: lights when Sleep Timer is working or when Daily

Timer or Recording Timer is on standby, working or

being set.

• Lights when Random Play is activated.

uST (stereo) indicator

• Lights while an FM stereo station with sufficient signal

strength is tuned in (see page 9).

iMONO indicator

• Lights while receiving an FM stereo station in monaural

(see page 9).

Download from Www.Somanuals.com. All Manuals Search And Download.

Daily Operations—Playback

¥ Turn on the power.

In this manual, the operations using the remote control

The STANDBY lamp on the main unit goes off.

are mainly explained; however, you can use the buttons

and controls on the main unit if they have the same (or

similar) name and marks.

• Without pressing

AUDIO, the System also turns

on by pressing one of the source selecting buttons in

the next step.

ø Select the source.

Playback automatically starts if the selected source is

ready to start playback.

• If you press AUX, start playback on the external

component.

Number

buttons

Adjust the volume.

[ Operate the target source as explained

later.

To turn off (standby) the System

The STANDBY lamp on the main unit

lights in red.

• A small amount of power is always

consumed even while on standby.

For private listening

Connect a pair of headphones to the PHONES jack on the

main unit. The sound will no longer come out of the

speakers. Be sure to turn down the volume before

connecting or putting on the headphones.

• Disconnecting the headphones will activate the

speakers again.

DO NOT turn off (standby) the System with

the volume set to an extremely high level;

otherwise, the sudden blast of sound can

damage your hearing, speakers and/or

headphones when you turn on the System or

start playback.

Adjusting the Volume

The volume level can be adjusted in 32 steps (VOLUME

MIN, VOLUME 1 – VOLUME 30, and VOLUME MAX).

Remote control:

Main unit:

Continued on the next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

If the FM reception is poor

The MONO indicator lights on the display.

To drop the volume in a moment

To restore the volume, press again, or

adjust the volume level.

Reception will improve though stereo

effect is lost—monaural reception mode.

To restore the stereo effect, press the

button again (the MONO indicator goes

off).

Listening to the Radio

To preset stations

To select the AM tuner interval spacing

Some countries space AM stations 9 kHz apart, and other

countries use 10 kHz spacing.

You can preset 30 FM and 15 AM stations.

1 Tune in to a station you want to preset.

1 Select “AM,” then turn off (standby) the System.

2 Select a preset number.

2 Select the appropriate AM space interval for your

area.

(10 kHz interval)

3 Store the station.

(9 kHz interval)

(While holding...)

To select the band (FM/AM)

To tune in to a preset station

1 ^{Select the band (FM or AM).}

To tune in to a station

While FM or AM is selected...

1 sec.

2 Select the preset number for the preset station.

Increases the frequencies.

Decreases the frequencies.

Frequency starts changing on the display.

When a station (frequency) with sufficient signal strength is

tuned in, the frequency search stops.

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press h10,

1, then 5.

To select number 30, press h10,

• When you repeatedly press the button, the frequency

changes step by step.

3, then 0.

To stop searching manually, press either button.

• You can also use 1or y buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

• When playing a multi-channel encoded DVDs, the System

properly converts these multi-channel signals into 2

channels, and emits the downmixed sound from the

speakers.

Playing Back a Disc

Before operating a disc, be familiar how a disc is recorded.

• DVD Video/DVD-VR consist of “Titles” which include

• To enjoy the powerful sound of these multi-channel

encoded DVDs, connect a proper decoder or an amplifier

with a proper built-in decoder to the OPTICAL DIGITAL

OUT terminal on the rear.

“

Chapters,” MP3/WMA/MPEG-1/MPEG-2 consist of

Groups” which include “Tracks,” JPEG consist of

Groups” which include “Files,” and CD/SVCD/VCD

consist of only “Tracks.”

• For DVD-VR/MP3/WMA/JPEG/MPEG-1/MPEG-2

playback, see also “Operations on the Control Screen”

on page 24.

While playing a disc except CDs: This System can store the

stop point, and when you start playback again by pressing

DVD/CD 3(even while on standby), it starts from the

position where you have stopped—Resume Play. (RESUME

appears on the display when you stop playback.)

To insert discs

To stop completely while Resume is activated, press 7

twice. (To cancel Resume, see “RESUME” on page 35.)

To select a title/group

While playing a disc...

Examples:

To select number 5,

press 5.

To select number 10,

press 10.

• When using an 8 cm disc, place it on the inner circle of the

disc tray.

To select number 15,

press h10, 1, then 5.

To select number 30,

press h10, 3, then 0.

To close the disc tray, press OPEN/CLOSE 0again.

If you press DVD/CD 3, disc tray closes automatically and

playback starts.

To start:

To pause:

To stop:

To select a chapter/track

While playing a disc...

To release it, press

DVD/CD 3.

To locate a particular portion

While playing a disc except MP3/WMA disc...

On-screen guide icons

• During disc playback, the following icons may appear for

a while on the TV screen:

Appears at the beginning of a scene containing

multi-angle views.

Appears at the beginning of a scene containing

multi-audio languages.

• For MP3/WMA discs, search speed and the indications on

the TV are different.

• No sound comes out while searching on DVD/SVCD/

VCD.

Appears at the beginning of a scene containing

multi-subtitle languages.

• The following icons will be also shown on the TV screen

to indicate your current operation.

To return to normal playback, press DVD/CD 3.

• To deactivate the on-screen guide icons, see “ON

SCREEN GUIDE” on page 35.

Download from Www.Somanuals.com. All Manuals Search And Download.

o select an item directly

To move to the next or

previous page of the

current menu:

To return to the previous

menu:

You can select a title/chapter/track directly and start

playback.

For DVD Video, you can select a title before starting

playback, while you can select a chapter after starting

playback

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press h10,

1, then 5.

(While holding...)

To cancel PBC

Before playback...

To select number 30, press h10,

3, then 0.

To play back using the disc menu

You can operate the disc play—DVD and SVCD/VCD with

Playback Control (PBC)—using the disc menu shown on the

TV screen.

You can also cancel PBC function by pressing the number

button to select a track.

To reactivate PBC, press 4.

7For DVD Video:

1 Show the disc menu.

Playing Back a Tape

To insert a tape

You can play back type I tapes.

• The use of C-120 or longer tapes is not recommended.

2 Select an item on the disc menu.

Push

Insert and close

To start:

To stop:

To fast-forward or

rewind:

• With some discs, you can also select items by entering the

number using the number buttons.

7For SVCD/VCD with PBC:

While playing a disc with PBC, “PBC” appears on the

display instead of the playing time.

When disc menu appears on the TV screen, select an item on

the menu. Playback of the selected item starts.

To remove the tape, press PUSH OPEN0on the main unit.

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press h10,

1, then 5.

To select number 30, press h10,

3, then 0.

Download from Www.Somanuals.com. All Manuals Search And Download.

Daily Operations—Sound & Other Adjustments

Reinforcing the Bass Sound

Remote Control

To change the bass level

• You can also use ACTIVE BASS EXTENSION on the

main unit.

To reinforce the heavy sound—SOUND TURBO II

You can boost the low and high frequency sound.

Presetting Automatic DVD Video Sound

Increase Level

The DVD Video sound is sometimes recorded at a lower

level than for other discs and sources. You can preset the

increase level for the currently loaded DVD Video, so you

do not have to adjust the volume when you change the

source.

Main unit

As the number is higher, sound increase level is also

reinforced.

Download from Www.Somanuals.com. All Manuals Search And Download.

Creating 3-dimensional Sound Field

—3D Phonic

Creating Your Own Sound Modes

—User Mode

While playing a disc...

You can create your own Sound Modes to make sounds suit

your taste. The changed settings can be stored as the USER 1,

USER 2 and USER 3 Modes.

1 Select one of the preset Sound Modes.

•

If you want to add surround elements to your Sound

Mode, select one of the Surround Modes.

On the TV screen

2 Enter the SEA Control Mode.

3D ACTION

3D DRAMA

Suitable for action movies and sports

programs.

Creates natural and warm sound. Enjoy

movies in a relaxed mood.

3D THEATER Enjoy sound effects like in a major movie

3 Adjust the SEA pattern.

theater.

1 Select—BASS or TRE (treble).

Selecting the Sound Modes

You can select one of the preset Sound Modes.

Surround Modes

2 Adjust the level.

• You can adjust the bass and treble level from

–3 to +3.

SEA Modes

Surround Modes*

DANCE

HALL

Increases resonance and bass.

Adds depth and brilliance to the sound.

STADIUM

Adds clarity and spreads the sound, as in

an outdoor stadium.

3 Repeat steps 1 and 2 to adjust the level of the other.

4 Finish the SEA pattern setting.

SEA (Sound Effect Amplifier) Modes

ROCK

Boosts low and high frequency. Good for

acoustic music.

POP

Good for vocal music.

Good for classical music.

4 Select one of the User Modes.

CLASSIC

User Modes

USER 1/2/3 Your individual mode stored in memory.

See the next column “Creating Your Own

Sound Modes—User Mode.”

OFF

No Sound Mode effect.

*Surround elements are added to the SEA elements to create

being-there feeling in your room.

5 Store the setting.

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Adjust the parameter.

Changing the Picture Tone

While showing a playback picture on the TV, you can select

the preset picture tone, or adjust it and store your own

settings.

To select a preset picture tone

1 ^{While playing, display VFP setting screen.}

4 Repeat steps 2 to 3 to adjust other parameters.

To remove the setting screen, press VFP again while

holding SHIFT. The screen will automatically be erased

after 9 seconds even if you do not press VFP.

(While holding...)

On the TV screen

Changing the Display Brightness

You can dim the display window.

2 Select a preset picture tone.

(Normal)

(While holding...)

NORMAL

CINEMA

Normally select this.

Suitable for a movie source.

Setting the Clock

USER1/USER2 You can adjust parameters and can

• To exit from the clock setting, press CLOCK/TIMER as

required.

store the settings (see below).

• To go back to the previous step, press CANCEL while

holding SHIFT.

To adjust the picture tone

1 ^{Select “USER1” or “USER2.”}

1 Activate clock setting mode.

• Follow steps 1 and 2 explained above.

2 Select a parameter you want to adjust.

• If you have already adjusted the clock before, press the

button repeatedly until the clock time starts flashing.

2 Adjust the hour, then minute.

GAMMA

Adjust if the neutral color is bright or

dark (–3 to +3).

BRIGHTNESS

CONTRAST

SATURATION

TINT

Adjust if the picture is bright or dark

as a whole (–8 to +8).

Adjust if the far and near positions

are unnatural (–7 to +7).

Adjust if the picture is whitish or

blackish (–7 to +7).

To check the current time when the System is turned on

Adjust if human skin color is

unnatural (–7 to +7).

SHARPNESS

Adjust if the picture is indistinct

(–8 to +8).

(While holding...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Unique DVD/VCD Operations

Selecting the Sound Track

For DVD Video: While playing back a chapter containing

Remote Control

audio languages, you can select the language to listen to.

For DVD-VR or SVCD/VCD: When playing back a track,

you can select the audio channel to play.

• You can also select the audio track using the on-screen bar

(see page 21).

(While holding...)

While playing a DVD Video...

Ex.:

While playing a DVD-VR or SVCD/VCD...

ST1/ST2/ST To listen to normal stereo (2 channel)

playback.

L1/L2/L

R1/R2/R

To listen to the left audio channel.

To listen to the right audio channel.

• SVCD can have 4 audio channels. Karaoke SVCD usually

uses these 4 channels to record two 2-channel recordings

(ST1/ST2).

Download from Www.Somanuals.com. All Manuals Search And Download.

While playing a DVD-VR...

Selecting the Subtitle Language

For DVD Video: While playing back a chapter containing

subtitles in different languages, you can select the subtitle

language to display on the TV screen.

For SVCD: While playing, you can select the subtitles even

if no subtitles are recorded on the disc.

For DVD-VR: While playing, you can turn the subtitle on or

off.

(While holding...)

• You can also select the subtitle language using the

on-screen bar (see page 21).

Selecting the View Angle

For DVD Video only: While playing back a chapter

containing multi-view angles, you can view the same scene

from different angles.

• You can also select the view angle using the on-screen bar

(see page 21).

While playing a DVD Video...

1 Display the subtitle selection window.

While playing...

(While holding...)

2 Select the subtitle language.

(While holding...)

Ex.:

While playing an SVCD...

(While holding...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Zoom

Special Picture Playback

Still picture playback

To zoom in JPEG file, see page 25.

1 While playing...

To start still picture

playback:

To resume normal

playback:

While playing...

(While holding...)

As the number increases, magnification also increases.

Frame-by-frame playback

1 ^{While playing...}

2 Move the zoomed-in position.

Still picture playback starts.

2 Advance the still picture frame by frame.

To resume normal playback, press DVD/CD 3.

To cancel zoom, press ZOOM repeatedly while holding

SHIFT until “ZOOM OFF” appears on the TV.

Slow-motion playback

• This does not function for MPEG-1/MPEG-2 discs.

1 While playing...

Still picture playback starts.

2 Select slow motion speed.

*Only available for DVD Video.

To resume normal playback, press DVD/CD 3.

Download from Www.Somanuals.com. All Manuals Search And Download.

Advanced Disc Operations

Programming the Playing Order

Remote Control

—Program Play

You can arrange the playing order of the chapters or

tracks (up to 99) before you start playback.

• Program play cannot be used for DVD-VR/JPEG/

MPEG-1/MPEG-2 discs.

Number

buttons

• Resume does not work for Program Play.

1 Before starting playback, activate Program Play.

Canceled

On the display

On the TV

Main unit

2 Select a chapter or a track you want for Program

Play.

•For DVD Video/MP3/WMA:

1 Select a title or group number.

2 Select a chapter or track number.

•For SVCD/VCD/CD:

1 Select a track number.

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press h10,

1, then 5.

To select number 30, press h10,

3, then 0.

3 Repeat step 2 above until you program all chapters or

tracks you want.

4 Start playback.

Playback starts in the order you

have programmed.

Continued on the next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

To check the programmed contents

Playing at Random—Random Play

You can play the contents of all chapters and tracks at

random.

Before playback...

in the reverse order

• Random Play cannot be used for DVD-VR, JPEG,

MPEG-1, MPEG-2 and some DVDs.

1 Before starting playback, activate Random Play.

in the programmed order

Canceled

To modify the program

Before or after playback...

To erase the last chapter/ To erase the entire

track:

program:

2 sec.

2 Start playback.

Playback starts in a random

order. Random Play ends when

all chapters/tracks are played.

(While holding...)

To add chapters/tracks to the program:

Repeat step 2 on page 18.

To skip:

To pause:

To stop:

To exit from Program Play

Before or after playback...

To release, press

DVD/CD 3.

To go to the beginning

of the current chapter/

track, press 4.

Canceled

To exit from Random Play

Before or after playback...

Canceled

Download from Www.Somanuals.com. All Manuals Search And Download.

A-B Repeat

Playing Repeatedly

You can repeat playback of a desired portion by specifying

the beginning (point A) and the ending (point B).

• A-B Repeat cannot be used for MP3/WMA/MPEG-1/

MPEG-2 and for some DVDs.

• You can also select the repeat mode using the

on-screen bar (see page 22).

• For DVD-VR/JPEG, see page 25.

• For DVD Video:

While playing...

1 While playing (without PBC for SVCD/VCD), select

the start point (A).

On the TV:

•

appears on

the TV if the TV is

turned on.

• For MP3/WMA/MPEG-1/MPEG-2:

(While holding...)

While playing or before playback...

On the TV:

2 Select the end point (B).

(REPEAT)GROUP

(REPEAT)ALL

(REPEAT)TRACK

(Canceled)

•

appears on

the TV.

• You can search for

the end point using

the y button.

• For CD/SVCD/VCD:

While playing or before playback (without PBC for SVCD/

VCD)...

(While holding...)

On the TV:

To cancel A-B Repeat, press A-B RPT again while holding

SHIFT.

• A-B Repeat will also be canceled when you stop play or

skip the chapter or track.

• For Program Play/Random Play mode:

While playing or before playback...

Prohibiting Disc Ejection

On the TV:

—Child Lock

You can lock the disc tray so that no one can eject the loaded

disc.

• This is possible while the System is on standby.

(REPEAT)ALL

(Canceled)

(REPEAT)STEP

While the disc tray is closed...

CHAP

TITLE

Repeats the current chapter.

Repeats the current title.

TRACK

(REPEAT TRACK)

Repeats the current track.

Repeats the current group.

GROUP

(REPEAT GROUP)

(While holding...)

ALL

(REPEAT ALL)

Repeats all chapters/tracks or

programmed tracks.

STEP

(REPEAT STEP)

Repeats the current chapter/track.

Cancels Repeat Play mode.

OFF

To cancel the prohibition, repeat the same procedure.

“UNLOCKED” appears on the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Bar Operations

On-screen Bar Information

Remote control

You can check the information on a disc (except for MP3/

WMA/JPEG disc) and use some functions through the

on-screen bar.

1 Disc type

Number

buttons

2 Playback information

Indication

Meanings

Dolby D,

LPCM

Audio format

3/2.1ch,

2/0.0ch

Channel number

Current title

Current chapter

Current group

Current track

Current title

On-screen bars

Current play list

Time indications

DVD Video

3 Playback conditions

Indication

Meanings

Playback

DVD-VR

SVCD

Forward/Reverse search

Forward/Reverse slow-motion

Pause

Stop

4 Operation icons (on the pull-down menu)

Indication

Meanings

Select to change the time indication.

Select to repeat playback.

Select for time search.

Select for chapter search.

Select for track search.

VCD

Select to change the audio language or

channel (see also page 15).

Select to change subtitle language

(see also page 16).

Select to change the view angle (see

also page 16).

MPEG-1/MPEG-2

Download from Www.Somanuals.com. All Manuals Search And Download.

Operations Using the

On-screen Bar

For detailed operations of the following functions, see

also “Operations Using the On-screen Bar” on this page.

Basic operation procedures through the on-screen bar are as

follows:

Ex.: Selecting a subtitle (French) for DVD Video:

Time information

You can change the time information in the on-screen bar

and the display window on the main unit.

While a disc is selected as the source...

1 While playing, display the on-screen bar with the

1 Display the on-screen bar with the pull-down menu.

pull-down menu.

2 Make sure

is selected (highlighted).

3 Change the time indication.

Disappears

*This does not appear for MPEG-1/MPEG-2 discs.

2 Select (highlight) the item you want.

TOTAL

T.REM

TIME

Elapsed disc/title time.

Remaining disc time.

Elapsed playing time of the current chapter/

track (not applicable for DVD-VR).

REM

Remaining time of the current chapter/

track (not applicable for DVD-VR).

3 Display the pop-up window.

Repeat Play

• See also page 20.

1 While playing a disc (without PBC for SVCD/VCD),

display the on-screen bar with the pull-down menu.

• Repeat play can be selected before starting playback,

not applicable for DVD Video.

4 Select the desired option in the pop-up window.

2 Select

3 Display the pop-up window.

ALL

Repeats the disc (not applicable for

DVD Video).

5 Finish the setting.

Pop-up window disappears.

A-B

Repeats a desired portion (see page 23).

Repeats the current title.

Repeats the current group.

Repeats the current chapter.

Repeats the current track.

Cancels Repeat Play.

TITLE

GROUP

CHAPTER

To remove the on-screen bar

TRACK

OFF

While playing DVD-VR discs, “PG” or “PL” appears.

During Program Play or Random Play, “STEP”

appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Finish the setting.

A-B Repeat

The System starts playing from

the specified time.

Select “A-B” in step

of “Repeat Play” on page 22.

Chapter Search

You can search for the chapter number to play.

2 Select the start point (A).

1 While playing, display the on-screen bar with the

pull-down menu.

2 Select

3 Display the pop-up window.

• Before pressing ENTER/SET, you can search for the

end point using y .

3 Select the end point (B).

A-B Repeat starts. The selected

portion plays repeatedly.

4 Enter the desired chapter number.

Examples:

To select number 5, press 5.

To select number 10, press 1,

then 0.

To select number 15, press 1,

then 5.

To select number 30, press 3,

then 0.

To cancel A-B Repeat, select “OFF” in step 1.

Time Search

You can move to a particular point by specifying the elapsed

playing time from the beginning.

1 While playing (without PBC for SVCD/VCD), display

the on-screen bar with the pull-down menu.

• Time Search can be used before starting playback (not

applicable for DVD Video).

•

To correct a misentry, press the number buttons until

the desired number is shown in the pop-up window.

5 Finish the setting.

The System starts playing the

searched chapter.

2 Select

3 Display the pop-up window.

4 Enter the time.

You can specify the time in hours/minutes/seconds.

Examples:

To move to a point of 1 (hours):

02 (minutes): 00 (seconds), press

1, 0, 2, 0, then 0.

To move to a point of 54

(minutes): 00 (seconds), press 0,

5, 4, 0, then 0.

• It is always required to enter the hour digit (even “0”

hour), but it is not required to enter trailing zeros (the

last two digits in the examples above).

•

To correct a misentry, press cursor

to erase the last

entry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Control screen for MP3/WMA/JPEG/MPEG-1/

Operations on the Control

Screen

For DVD-VR/MP3/WMA/JPEG/MPEG-1/MPEG-2:

You can search for and play the desired items through the

control screen.

MPEG-2 discs

The control screen automatically appears on the TV screen

when you load an MP3, WMA, JPEG, MPEG-1 or MPEG-2

disc.

If files of different types are recorded on a disc, select the file

type to play (see “FILE TYPE” on page 35).

Control screen for DVD-VR

The control screen is superimposed on the TV screen when

you call up Program List (PG) or Play List (PL).

Ex.: When an MP3 disc is loaded.

To select playback type

To select the Program

List:

To select the Play List:

When Program List is selected.

1 Current group number/total group number

2 Current group

3 Group list

4 Current track

5 Track information (ID3 Tag Version 1.0: only for

MP3/WMA)

6 Repeat Play setting

7 Elapsed playing time of the current track

(only for MP3/WMA/MPEG-1/MPEG-2)

8 Operation mode icon

When Play List is selected.

9 Current track number/total number of tracks in the

current group (total number of tracks on the loaded

disc)

0 Highlight bar

- Track list

To move the highlight bar between group list and track

list (for MP3/WMA/JPEG/MPEG-1/MPEG-2)

1 List number

2 Recording date

Moves the bar to the

track list.

3 Recording source (TV station, the input terminal of

the recording equipment, etc.)

4 Start time of recording

Moves the bar to the

group list.

5 Title of the program/play list*

6 Highlight bar (current selection)

7 Creating date of play lists

8 Number of chapters

To select an item in the list

Move the highlight bar to a desired

item.

• If you select an item while

playing back a DVD-VR/MP3/

WMA/MPEG-1/MPEG-2 disc,

the selected item starts playback

automatically.

9 Playback time

*The title of the Program List or Play List may not be

displayed depending on the recording equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

To start playback

For JPEG:

To repeat slide-show for JPEG

While playing or before playback...

The selected track (still picture) is

displayed until you change it.

(Canceled)

GROUP

(REPEAT GROUP)

ALL

Repeats the current group.

Slide-show playback starts.

Each track (still picture) is shown

on the screen for a few seconds,

then changes one after another.

Repeats all files in the disc.

Cancels Repeat Play mode.

(REPEAT ALL)

OFF

For the other discs:

• For Repeat Play of MP3/WMA/MPEG-1/MPEG-2, see

page 20.

Playback starts with the selected

track.

• Pressing DVD/CD 3also starts

playback.

To zoom in the still picture (for JPEG)

• You cannot zoom in the still picture during slide-show.

1 While playback is paused...

• While playing DVD-VR/JPEG/MPEG-1/MPEG-2 tracks,

the control screen disappears.

• For JPEG discs, to cancel slide-show and display the

current still picture, press 8.

To stop playback

(While holding...)

As the number increases, magnification also increases.

2 Move the zoomed-in position.

To repeat title/play list for DVD-VR

While playing a program in Program List

On the TV:

To cancel zoom, press ZOOM repeatedly while holding

SHIFT until “ZOOM OFF” appears on the TV.

While playing an item in Play List

On the TV:

CHAP Repeats the current chapter.

PG/PL Repeats the current title/play list.

ALL

OFF

Repeats all programs in the disc.

Cansels Repeat Play Mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording Operations

IMPORTANT

It may be unlawful to record or play back

Main unit

copyrighted material without the consent of the

Recording on a Tape

You can use type I tapes for recording.

• To play a tape, see page 11.

1 Insert a recordable cassette in deck B.

Push

Insert and close

2 Start playing the source—“FM,” “AM,” “DVD/CD,”

“TAPE-A” or “AUX.”

• When recording from TAPE-A, you can also use

dubbing function (see page 27).

• When recording from a disc, you can also use

Synchronized Disc Recording (see page 27).

3 Start recording.

To stop recording

Download from Www.Somanuals.com. All Manuals Search And Download.

To record without creating 4-second blanks

Dubbing Tapes

1 Press DVD/CD 3, then press 8.

2 Press 4to go back to the beginning of the track.

3 Press DISC REC to start recording.

1 Change the source to TAPE-B.

To protect your recording

Cassettes have two small tabs on the back to protect

from unexpected erasure or re-recording.

To protect your recording, remove these tabs.

2 Insert the source cassette in deck A, and a recordable

cassette in deck B.

3 Start dubbing.

To re-record on a protected tape, cover the holes with

adhesive tape.

• When either tape playback or recording ends, both cassette

decks stop at the same time.

To stop dubbing

Synchronized Disc Recording

You can start and stop both disc play and tape recording at

the same time.

1 Load a disc and insert a recordable cassette in deck B.

• If the current playing source is not the disc player, press

DVD/CD 3, then 7 (twice if resume is turned “ON”).

For recording desired tracks from discs:

You can program tracks to record with your preferred

order.

• Select Program Play (and make a program: see page 18)

without starting playback.

2 Start recording.

The System automatically creates 4-second blanks between

the tunes recorded on the tape.

• When either disc play or recording ends, both disc player

and the cassette deck stop at the same time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Karaoke

NOTE

Remote control

• This function is not available in the Australian model.

IMPORTANT

• Always set MIC LEVEL to MIN when connecting or

disconnecting the microphone.

Number

buttons

DO NOT keep the microphone connected

while it is not in use.

Singing Along (Karaoke)

You can enjoy singing along (Karaoke) by using the

microphone.

Source

Selecting

buttons

To sing along using Karaoke discs

You can enjoy Karaoke using Karaoke discs (except

Karaoke CD).

• By pressing REC START/STOP, you can record your

singing-along.

1 Turn MIC LEVEL to MIN.

Main unit

2 Connect the microphone (not supplied) to the MIC

jack.

3 Activate the Karaoke Mode.

Source

Selecting

buttons

(While holding...)

4 Insert and start playing a Karaoke disc.

Continued on the next page...

Karaoke function is not available in the Australian model.

Download from Www.Somanuals.com. All Manuals Search And Download.

5 Select the desired audio channel (see page 15).

Singing Along Using Stereo Discs

—Vocal Masking

You can enjoy singing along while playing a stereo disc.

Vocal Masking reduces the lead vocal of a disc.

(While holding...)

• You can use this function only with DVD/CD sources.

• When playing a Karaoke disc in Vocal Masking Mode, the

vocal may not be reduced or the volume may be lower.

• By pressing REC START/STOP, you can record your

singing-along.

6 Sing into the microphone.

7 Adjust the MIC LEVEL and VOLUME.

1 Turn MIC LEVEL to MIN.

To cancel the Karaoke Mode, select “MIC OFF” in step 3.

2 Connect the microphone (not supplied) to the MIC

jack.

Adjusting the key (disc playback only)

3 Insert and start playing a stereo disc.

4 Activate Vocal Masking Mode.

(While holding...)

To raise the key.

To lower the key.

(While holding...)

To cancel the adjustment, set the number shown on the

display to “0.”

Applying an echo to your voice

During Karaoke Play...

5 Sing into the microphone.

6 Adjust the MIC LEVEL and VOLUME.

(While holding...)

• As the number increases, echo level also increases.

To cancel the Vocal Masking Mode, select “MIC OFF” in

step 4 or change the source to play.

Karaoke function is not available in the Australian model.

Download from Www.Somanuals.com. All Manuals Search And Download.

To use microphone only

Microphone Mixing

You can enjoy microphone mixing by using the microphone.

1 Turn MIC LEVEL to MIN.

• By pressing REC START/STOP, you can record your

singing-along.

1 Turn MIC LEVEL to MIN.

2 Connect the microphone (not supplied) to the MIC

jack.

3 Select DVD/CD as the source, then stop playback.

2 Connect the microphone (not supplied) to the MIC

jack.

3 Start playing the source—FM, AM, disc player, tape,

or auxiliary equipment connected to the AUX jack.

4 Activate the Karaoke mode.

4 Activate the Karaoke Mode.

(While holding...)

5 Sing into the microphone.

6 Adjust the MIC LEVEL and VOLUME.

5 Sing into the microphone.

6 Adjust the MIC LEVEL and VOLUME.

To cancel the Karaoke mode, select “MIC OFF” in step 4.

To cancel the Karaoke Mode, select “MIC OFF” in step 4.

• When you change the source to play, the Karaoke Mode is

canceled. Repeat step 4 to activate the Karaoke Mode

again.

Karaoke function is not available in the Australian model.

Download from Www.Somanuals.com. All Manuals Search And Download.

7 Start playback.

Reserving Karaoke Songs

—Karaoke Program Play

You can determine the playback order of up to 12 chapters

or tracks on the disc player.

Karaoke Program Play cannot be used for DVD-VR.

8 Sing into the microphone.

9 Adjust the MIC LEVEL and VOLUME.

1 Turn MIC LEVEL to MIN.

2 Connect the microphone (not supplied) to the MIC

jack.

To check the programmed contents

3 Change the source to the “DVD/CD.”

4 Activate Karaoke Program Play.

(While holding...)

The Karaoke reserve screen appears.

To modify the program

While the Karaoke reserve screen is shown on the TV...

(While holding...)

On the TV screen

To erase the unwanted chapter/track:

• PRGM indicator flashes during this mode.

5 Select songs you want for Karaoke Program Play.

For DVD Video/MP3/WMA/MPEG-1/MPEG-2:

1 Press the number buttons to select a title or group.

2 Repeat step 1 to select a chapter or track.

For SVCD/VCD/CD:

Press the number buttons to select a track.

(While holding...)

To erase the entire program:

2 sec.

Examples:

To select number 5, press 5.

To select number 10, press 10.

To select number 15, press h10,

1, then 5.

To select number 30, press h10,

3, then 0.

(While holding...)

To add chapters/tracks to the program:

6 Activate the Karaoke Mode.

Repeat step 5 on the left.

(While holding...)

Karaoke function is not available in the Australian model.

Download from Www.Somanuals.com. All Manuals Search And Download.

Timer Operations

You need to set the built-in clock before using timer

functions (see page 14) except Sleep Timer.

Remote Control

Setting the Timer

Using Daily Timer, you can wake up with your favorite

music. On the other hand, with Recording Timer, you can

make a tape of a radio broadcast.

• To go back to the previous step, press CANCEL while

holding SHIFT.

1 Select one of the timer setting modes—ON for Daily

Timer or Recording Timer.

Daily Timer

Recording Timer

(time)

Clock setting

(time)

Canceled

Ex.: Daily Timer

2 Make the timer setting as you want.

Repeat the procedure for the following settings until finished:

Set the hour then minute for on-time.

Set the hour then minute for off-time.

Select the playback source.

• For Daily Timer, you can select from “TUNER FM,”

“TUNER AM,” “DISC,” “TAPE-A,” “TAPE-B”

and “AUX.”

• For Recording Timer, you can select from

“TUNER FM” and “TUNER AM.”

EX.: When “TUNER FM” is selected for Daily Timer.

Select a preset station for “TUNER FM” and

“TUNER AM,” or select a group and track

number for “DISC.”

For Daily Timer: Select the volume level.

• You can select the volume level (“VOLUME 5,”

“VOLUME 10,” “VOLUME 15” and“VOLUME --”).

If you select “VOLUME --,” the volume is set to the

last level when the System has been turned off.

Continued on the next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

3 Turn off the System (on standby) if you have set the

2 Turn off the selected timer.

timer with the System turned on.

(While holding...)

The timer indicator (

) goes off.

How Daily Timer works

Once the Daily Timer has been set, the timer indicator

To turn on the timer again, repeat step 1 and press

ENTER/SET in step 2.

(

) and DAILY indicator are lit on the display. Daily

Timer is activated at the same time everyday until the

timer is turned off manually (see below).

When the on-time comes

The System turns on, starts playing the specified source

(except “AUX”), and increases the volume level

gradually to the preset level for about 30 seconds.

When the off-time comes

The System stops playback, and turns off (standby)

automatically.

Turning Off the Power Automatically

—

Sleep Timer

With Sleep Timer, you can fall asleep listening to music.

• The timer setting remains in memory until you change

it.

1 Specify the time (in minutes).

• Daily Timer will not start working if the system has

been turned on.

Canceled

How Recording Timer works

When Recording Timer has been set, the timer indicator

(

) and the REC indicator are lit on the display.

Recording Timer works only once.

When the on-time comes

The System turns on, tunes in to the specified station, sets

the volume level to “VOLUME MIN,” and starts

recording.

2 Wait until the set time goes off.

To check the time remaining until the shut-off time

• If you press the button repeatedly, you can

change the shut-off time.

When the off-time comes

The System stops recording, and turns off (standby).

• The timer setting remains in memory until you change

it.

Recording Timer will start working even if the System

has been turned on.

Timer Priority

Recording Timer has priority over the Daily Timer

To turn off the Timer after the setting is done

You can turn off the timer after it has been set.

and Sleep Timer.

• Since Daily Timer is activated at the same time everyday,

you may need to cancel it on some particular days.

Recording Timer

Daily Timer

1 Select the timer you want to cancel (DAILYTIMER

or REC TIMER).

Canceled

Daily Timer

(time)

Clock setting

Recording Timer

Sleep Timer

(time)

Canceled

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup Menu Operations

How to set the Initial Settings

1 ^{Press SET UP.}

Initial Settings

The Setup Menu cannot be activated during playback.

2 Press

3 Press

(or ) to select the menu.

(or ) to move to select the item.

4 Press ENTER/SET.

5 Press (or ) to select the options, then press

ENTER/SET.

• For settings of the LANGUAGE menu, see “Language

Code List” on page 41.

To erase a preference display

Press SET UP.

LANGUAGE menu

Item

Contents

MENU LANGUAGE

AUDIO LANGUAGE

SUBTITLE

You can select the initial menu language of DVD Video. See page 41.

You can select the initial audio language of DVD Video. See page 41.

You can select the initial subtitle language of DVD Video. See page 41.

You can select “ENGLISH,” “CHINESE,” or “SPANISH” as the on-screen language.

ON SCREEN LANGUAGE

PICTURE menu

Item

Contents

MONITOR TYPE

You can select the monitor type to match your TV when you play back DVD Video discs

recorded for wide-screen televisions.

When you use a multi-color system TV, you can change the color system of the System

automatically by selecting “MULTI” options as the monitor type.

16:9/16:9MULTI (Wide television screen): For a wide-screen (16:9) TV.

4:3 LB/4:3MULTI LB (Letter Box conversion): For a conventional (4:3) TV. Displays

a wide-screen picture to fit the width of the TV screen keeping the aspect ratio.

4:3 PS/4:3MULTI PS (Pan Scan conversion): For a conventional (4:3) TV. The picture

is zoomed in to fill the screen vertically and the left and right sides of the picture are

cut off.

PICTURE SOURCE

You can obtain optimal picture quality by selecting the source type of the disc contents.

AUTO: Normally, select this option. The System recognizes the picture type (film or video

source) of the current disc according to the disc information.

FILM: For a film source disc.

VIDEO: For a video source disc.

Continued on the next page...

Download from Www.Somanuals.com. All Manuals Search And Download.

Item

Contents

SCREEN SAVER

You can set the screen saver function to ON or OFF.

ON: The on-screen display on the TV becomes dark when no operation is done for about

5 minutes.

OFF: To cancel the screen saver.

FILE TYPE

You can select the file type to play.

AUDIO: To play MP3/WMA files.

STILL PICTURE: To play JPEG files.

VIDEO: To play MPEG-1/MPEG-2 files.

AUDIO menu

Item

Contents

DIGITAL AUDIO OUTPUT

Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.

PCM ONLY: When connecting to audio equipment which can decode only linear PCM

signals.

DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier

with a built-in Dolby Digital decoder.

STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS,

MPEG Multichannel or Dolby Digital decoder.

DOWN MIX

This setting is effective for digital audio output if “DIGITAL AUDIO OUTPUT” is set to

“PCM ONLY.”

DOLBY SURROUND: Select this when connecting to a surround decoder.

STEREO: Select this when connecting to a stereo receiver, MD player, TV, etc.

D. RANGE COMPRESSION

Set this item to listen to DVD Video recorded in Dolby Digital format at low volume.

AUTO: You can enjoy powerful playback sound with full dynamic range.

ON: Select this when you want to fully apply the compression effect to make the sound at

lower volume clear (useful at midnight).

OTHERS menu

Item

Contents

RESUME

You can select Resume (not applicable for CDs).

ON: The System resumes playback from the position where playback has been stopped if

the disc is still in the disc tray.

OFF: Resume is deactivated.

ON SCREEN GUIDE

Activate or deactivate the on-screen guide.

ON: To activate the on-screen guide.

OFF: To deactivate the on-screen guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the TV

Operating TV

Remote control

You can operate JVC’s TV using this remote control.

To turn on or off the To select the input mode (either

TV:

TV or VIDEO):

(While holding...)

To adjust TV volume:

(While holding...)

To select the TV channel:

(While holding...)

Download from Www.Somanuals.com. All Manuals Search And Download.

Additional Information

• For MP3/WMA playback...

– This System can play back MP3/WMA files with the

Learning More about This System

extension code <.mp3> or <.wma> (regardless of the

letter case—upper/lower).

– MP3 discs require a longer readout time than regular

CDs depending on the complexity of the group/file

configuration.

– Some MP3/WMA files cannot be played back and will

be skipped. This results from their recording processes

and conditions.

– When making MP3/WMA discs, use ISO 9660 Level 1

or Level 2 for the disc format.

– It is recommended that you make each MP3/WMA file at

a sampling rate of 44.1 kHz and at bit rate of 128 kbps.

This System cannot play back files made at a bit rate of

less than 64 kbps.

• For MPEG-1/MPEG-2 playback...

– The stream format should conform to MPEG system/

program stream.

– 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is

recommended for the highest resolution.

– This System also supports the resolutions of 352 x 576/

480 x 576/352 x 288 pixels (25 fps) and 352 x 480/480 x

480/352 x 240 pixels (30 fps).

– The file format should be MP@ML (Main Profile at

Main Level)/SP@ML (Simple profile at Main Level)/

MP@LL (Main Profile at Low Level).

– Audio streams should conform to MPEG1 Audio layer-2

or MPEG2 Audio Layer-2.

Introduction (see pages 1 and 2)

Playable Disc Types:

• If you play back an NTSC disc with the color system set to

“PAL,” you can watch the playback picture (the disc will

be reproduced using “PAL 60” format), but the TV screen

may not display properly.

• If you play back a PAL disc with the color system set to

“NTSC,” you can watch the playback picture, but the

following symptoms may occur:

– The items on the disc menu will be blurred, and be shown

slightly shifted when highlighted.

– The aspect ratio of the picture may differ from the

original aspect ratio.

– The picture movement is not smooth.

About audio format

–

Linear PCM: Uncompressed digital audio, the same

format used for CDs and most studio masters.

Dolby Digital: Compressed digital audio, developed by

Dolby Laboratories, which enables multi-channel

encode to create the realistic surround sound.

–

DTS (Digital Theater Systems): Compressed digital

audio, developed by Digital Theater Systems, Inc., which

enables multi-channel like Dolby Digital. As the

compression ratio is lower than for Dolby Digital, it

provides wider dynamic range and better separation.

Daily Operations—Playback (see pages 8 to 11)

Listening to the Radio:

• If you store a new station into an occupied preset number,

the previously stored station in that number will be erased.

• When you unplug the AC power cord or if a power failure

occurs, the preset stations will be erased in a few days. If

this happens, preset the stations again.

• For JPEG files playback...

– This System can play back JPEG files with the extension

code <.jpg> or <.jpeg> (regardless of the letter case–

upper/lower).

– It is recommended that you record a file at 640 x 480

resolution. (If a file has been recorded at a resolution of

more than 640 x 480, it will take a long time to be

shown.)

– This System can play only baseline JPEG files*.

Progressive JPEG files* or lossless JPEG files* cannot

be played.

* Baseline JPEG format: Used for digital cameras,

web, etc.

Playing Back a Disc:

• On some DVD, SVCD, or VCD discs, the actual operations

may be different from what is explained in this manual, due

to the programming and disc structure; such differences are

not a malfunction of this System.

• This System can recognize up to 4 000 files in a disc. Also,

the System can recognize up to 150 files per group and up

to 99 groups in a disc.

– If there are any unplayable files in a folder, those files are

also counted in the total file number.

– Playable files which do not belong to any groups are

handled as Group 1.

Progressive JPEG format:Used for web.

Lossless JPEG format: An old type and rarely used

now.

– This System may not play back JPEG files properly if

they are recorded on devices other than digital still

camera.

• For DVD-VR playback...

– When making a disc, use the UDF-Bridge format.

– For details about DVD-VR format and playlist, refer to

the manual of the recording equipment.

– You cannot use reverse Slow-motion playback, Program

Play or Random Play.

Download from Www.Somanuals.com. All Manuals Search And Download.

Daily Operations—Sound & Other Adjustments

(see pages 12 to 14)

Recording Operations (see pages 26 and 27)

Recording on a Tape:

• The recording level is automatically set correctly. Thus,

you can adjust the sound you are actually listening to

without affecting the recording level.

Creating 3-dimensional Sound Field—3D Phonic:

• While you use the headphones, 3D Phonic mode is

canceled temporary.

• There is leader tape which cannot be recorded onto at the

start and the end of cassette tapes. Thus, when recording

discs or radio broadcasts, wind the leader tape first to

ensure that the recording will be made without any music

part lost.

• When you activate the Karaoke Mode, 3D Phonic mode is

canceled temporary.

• 3D Phonic setting is also applied to the optical digital

output signals through the OPTICAL DIGITAL OUTPUT

terminal.

• If no cassette or a protected tape is inserted, “NO REC”

appears on the display.

• You cannot change the source during recording.

Synchronized Disc Recording:

• While recording, you cannot use x/4, y /1,

DVD LEVEL, 3D PHONIC and source selecting buttons.

• You can adjust volume control, sound setting (Active Bass

Extension and Sound Turbo II) and sound mode but the

settings do not affect the recording sound.

Creating Your Own Sound Modes —User Mode:

• When you unplug the AC power cord or if a power failure

occurs, the User Mode settings will be erased in a few days.

If this happens, set the User Mode again.

Setting the Clock:

• “0:00” will flash on the display until you set the clock.

• The clock may gain or lose 1 to 2 minutes per month. If this

happens, reset the clock.

Unique DVD/VCD Operations (see pages 15 to 17)

Selecting the Sound Track:

• You cannot use Repeat Play during synchronized

recording (Repeat Play will be canceled).

• On some DVD Video discs, you cannot change audio

languages while playing back.

Special Picture Playback:

• During slow-motion playback, no sound will be

reproduced.

• While zoomed in, the picture may look coarse.

Advanced Disc Operations (see pages 18 to 20)

Programming the Playing Order—Program Play:

• While programming steps...

Your entry will be ignored if you have tried to program an

item number that does not exist on the disc (for example,

selecting track 14 on a disc that only has 12 tracks).

Playing Repeatedly:

• A-B Repeat cannot be used on some DVDs.

• A-B Repeat is possible only within the same title or within

the same track.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Karaoke (see pages 28 to 31)

Setup Menu Operations (see pages 34 and 35)

Singing Along Using Stereo Discs—Vocal Masking:

• Vocal Masking Mode setting is also applied to the optical

digital output signals through the OPTICAL DIGITAL

OUTPUT terminal.

How to set the Initial Settings:

• If the upper and lower parts of the menu are cut off, adjust

the picture size control of the TV.

LANGUAGE menu:

• On some music, Vocal Masking does not provide the

correct effect.

• When the language you have selected for MENU

LANGUAGE, AUDIO LANGUAGE, or SUBTITLE is

not recorded on a disc, the original language is used as the

initial language.

Timer Operations (see pages 32 and 33)

Setting the Timer:

PICTURE menu—MONITOR TYPE:

• If you do not specify the preset station or track number

correctly while setting a timer, the currently selected

station or the first track will be played when the timer is

activated.

• When you unplug the AC power cord or if a power failure

occurs, the timer will be canceled. You need to set the

clock first, then the timer again.

• Without stopping the recording, you cannot change the

source after Recording Timer starts recording.

• If you set DVD Video/MPEG-1/MPEG-2 as the source,

Daily Timer may not work correctly.

• Even if “4:3 PS/4:3 MULTI PS” is selected, the screen size

may become 4:3 letter box with some DVD Video discs.

This depends on how the discs are recorded.

• When you select “16:9/16:9 MULTI” for a picture whose

aspect ratio is 4:3, the picture slightly changes due to the

process for converting the picture width.

AUDIO menu—DOWN MIX:

• This setting is not effective when DTS multi-channel

software is played back.

OTHERS menu—ON SCREEN GUIDE:

• The setup menu and on-screen bar will be displayed (and

recorded) even though this function is set to “OFF.”

Subtitles and the information for zoom-in always appear on

the display regardless of this setting.

Timer Priority:

• If you set the Sleep Timer after Daily Timer starts playing

the selected source, Daily Timer is canceled.

• If you set the Sleep Timer after Recording Timer starts

recording, Recording Timer is canceled, but recording

continues until Sleep Timer shuts off the power.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3, WMA, JPEG, MPEG-1 or MPEG-2 files are not

played back.

Troubleshooting

sThe inserted disc may include multiple types of tracks

(ex. MP3/WMA files and JPEG files). In this case, you

can only play back the files selected by the “FILE

TYPE” setting (see page 35).

If you are having a problem with your System, check this list

for a possible solution before calling for service.

General:

Adjustments or settings are suddenly canceled before

you finish.

sThere is a time limit. Repeat procedure again.

Operations are disabled.

sYou have changed the “FILE TYPE” (see page 35)

setting after you inserted a disc. In this case, reload the

disc.

The disc sound is discontinuous.

sThe built-in microprocessor may malfunction due to

external electrical interference. Unplug the AC power

cord and then plug it back in.

Unable to operate the System from the remote control.

sThe path between the remote control and the remote

sensor on the System is blocked.

sThe disc is scratched or dirty.

The disc playback sounds strange.

sCancel key adjustment (see page 29).

No subtitle appears on the display though you have

selected the initial subtitle language.

sSome DVDs are programmed to always display no

subtitle initially. If this happens, press SUB TITLE while

holding SHIFT after starting play (see page 16).

Audio language is different from the one you have

selected as the initial audio language.

sThe batteries are exhausted.

No sound is heard.

sSpeaker connections are incorrect or loose.

sHeadphones are connected.

No picture appears on the screen.

sSome DVDs are programmed to always use the original

language initially. If this happens, press AUDIO/MPX

after starting play (see page 15).

sThe video cord connections are incorrect or loose.

No picture is displayed on the TV screen, the picture is

blurred, or the picture is divided into two parts.

sIncorrect color system is selected (see “Changing the

Color System” on page 6).

The disc tray does not open or close.

sThe AC power cord is not plugged in.

sChild Lock is in use. “LOCKED” appears in the display

window (see page 20).

The left and right edges of the picture are missing on the

screen.

Tape Operations:

The cassette holder cannot be opened.

sSelect “4:3 LB/4:3 MULTI LB” for “MONITOR

TYPE” (see page 34).

sPower supply from the AC power cord has been cut off

Radio Operations:

Hard to hear broadcasts because of noise.

sAntennas connections are incorrect or loose.

sThe AM loop antenna is too close to the System.

sThe FM antenna is not properly extended and positioned.

while the tape was running. Turn on the System.

Recording Operations:

Impossible to record.

sSmall tabs on the back of the cassette are removed.

Cover the holes with adhesive tape.

Disc Operations:

Timer Operations:

The disc does not play.

Daily Timer does not work.

sYou have inserted a DVD Video whose Region Code is

not correct. (“REGION ERR” appears on the display.)

sThe disc is placed upside down. Place the disc with the

label side up.

sThe System has been turned on when the on-time comes.

Timer starts working only when the System is turned off.

ID3 Tag on an MP3/WMA disc cannot be shown.

sThere are two types of ID3 Tag—Version 1 and Version

2. This System can only show ID3 Tag Version 1.

Groups and tracks are not played back as you expect.

sThe playing order is determined when the disc was

recorded. It depends on the writing application.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Avoid the following places to store the tape—in dusty

places, in direct sunlight or heat, in moist areas, on a TV or

speaker, or near a magnet.

To keep the best recording and playback sound quality:

• Use a cotton swab moistened with alcohol to clean the

heads, capstans, and pinch rollers.

Maintenance

To get the best performance of the System, keep your discs,

tapes, and mechanism clean.

Handling discs

• Remove the disc from its case by holding it at the edge

while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

• Put the disc back in its case after use to prevent warping.

• Be careful not to scratch the surface of the disc when

placing it back in its case.

• Avoid exposure to direct sunlight, extreme temperatures,

and moisture.

To clean the disc:

• Use a head demagnetizer (available at electronics and

audio shops) to demagnetize the heads (when the System is

turned off).

Cleaning the System

• Stains should be wiped off with a soft cloth. If the System

is heavily stained, wipe it with a cloth soaked in

water-diluted neutral detergent and wrung well, then wipe

clean with a dry cloth.

• Since the System may deteriorate in quality, become

damaged or get its paint peeled off, be careful about the

following:

– DO NOT wipe it with a hard cloth.

– DO NOT wipe it forcefully.

– DO NOT wipe it with thinner or benzine.

– DO NOT apply any volatile substance such as

insecticides to it.

– DO NOT allow any rubber or plastic to remain in contact

for a long time.

Wipe the disc with a soft cloth in a straight line from center

to edge.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by

inserting a pencil in one of the reels and rotate it.

– If the tape is loose, it may get stretched, cut, or caught in

the cassette.

• Be careful not to touch the tape surface.

Language Code List

AA Afar

FA Persian

FI Finnish

FJ Fiji

FO Faroese

FY Frisian

KM Cambodian

KN Kannada

KO Korean (KOR)

KS Kashmiri

KU Kurdish

KY Kirghiz

OM (Afan) Oromo

OR Oriya

PA Panjabi

Swedish

AB Abkhazian

AF Afrikaans

AM Ameharic

AR Arabic

AS Assamese

AY Aymara

AZ Azerbaijani

BA Bashkir

BE Byelorussian

BG Bulgarian

BH Bihari

BI Bislama

BN Bengali, Bangla

BO Tibetan

BR Breton

CA Catalan

CO Corsican

CS Czech

SW Swahili

TA Tamil

TE Telugu

TG Tajik

TH Thai

PL Polish

PS Pashto, Pushto

PT Portuguese

QU Quechua

RM Rhaeto-Romance

RN Kirundi

RO Rumanian

RW Kinyarwanda

SA Sanskrit

GA Irish

GD Scots Gaelic

GL Galician

GN Guarani

GU Gujarati

HA Hausa

LA Latin

LN Lingala

Tigrinya

TK Turkmen

TL Tagalog

TN Setswana

TO Tonga

TR Turkish

TT Tatar

TW Twi

UK Ukrainian

UR Urdu

UZ Uzbek

LO Laothian

LT Lithuanian

LV Latvian, Lettish

MG Malagasy

MI Maori

MK Macedonian

ML Malayalam

MN Mongolian

MO Moldavian

MR Marathi

MS Malay (MAY)

MT Maltese

MY Burmese

NA Nauru

NE Nepali

NL Dutch

HI Hindi

HR Croatian

HU Hungarian

HY Armenian

IA Interlingua

IE Interlingue

IK Inupiak

IN Indonesian

IS Icelandic

IW Hebrew

SD Sindhi

SG Sangho

SH Serbo-Croatian

Tsonga

Singhalese

SK Slovak

SL Slovenian

SM Samoan

SN Shona

SO Somali

SQ Albanian

SR Serbian

SS Siswati

ST Sesotho

SU Sundanese

Vietnamese

CY Welsh

DA Danish

VO Volapuk

WO Wolof

XH Xhosa

YO Yoruba

ZU Zulu

DZ Bhutani

EL Greek

EO Esperanto

ET Estonian

EU Basque

Yiddish

JW Javanese

KA Georgian

KK Kazakh

NO Norwegian

OC Occitan

KL Greenlandic

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

Amplifier section

General

Power requirement:

AC 110 V / AC 127 V / AC 220 V /

Output Power:

90 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no

more than 10% total harmonic distortion.

AC 230 V – AC 240 V

, (adjustable

with the voltage selector), 50 Hz / 60 Hz

Digital output:

OPTICAL DIGITAL OUTPUT:

Power consumption: at operation: 95 W

on standby: 17 W

Dimensions (approx.): 265 mm x 337 mm x 370 mm (W/H/D)

–21 dBm to –15 dBm (660 nm ±30 nm)

Audio input sensitivity/Impedance

(Measured at 1 kHz, with tape recording signal 400 mV)

Mass (approx.):

7.9 kg

Design and specifications are subject to change without notice.

AUX:

MIC:

400 mV/47 kΩ

3.0 mV/50 kΩ

• Manufactured under license from Dolby Laboratories. “Dolby”,

“Pro Logic”, and the double-D symbol are trademarks of Dolby

Laboratories.

• “DTS” is a registered trademark of DTS, Inc. and “DTS

2.0+Digital Out” is a trademark of DTS, Inc.

VIDEO OUT:

Color system:

VIDEO (composite):

S-VIDEO:

NTSC/PAL selectable

1 V(p-p)/75 Ω

Y (luminance)

1 V(p-p)/75 Ω

0.286 V(p-p)/75 Ω

C (chrominance, burst)

• Microsoft and Windows Media are either registered trademarks or

trademarks of Microsoft Corporation in the United States and/or

other countries.

Speaker Terminals:

6 Ω − 16 Ω

Tuner section

FM tuning range:

87.50 MHz – 108.00 MHz

• This product incorporates copyright protection technology that is

protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by

Macrovision, and is intended for home and other limited viewing

uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

AM (MW) tuning range:

531 kHz – 1 710 kHz (at 9 kHz)

530 kHz – 1 710 kHz (at 10 kHz)

531 kHz – 1 602 kHz (at 9 kHz)

530 kHz – 1 600 kHz (at 10 kHz)

For Saudi Arabia only:

Disc player section

Playable disc: DVD Video/CD/VCD/SVCD

“CONSUMERS SHOULD NOTE THAT NOT ALL HIGH

DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE

WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE

DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625

PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS

RECOMMENDED THAT THE USER SWITCH THE

CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT.

IF THERE ARE QUESTIONS REGARDING OUR TV SET

COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD

PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE

CENTER.”

CD-R/-RW/-ROM (CD/VCD/SVCD/MP3/WMA/

JPEG/MPEG-1/MPEG-2 format)

DVD-R/-RW (DVD Video/DVD Video Recording

(VR)/MP3/WMA/JPEG/MPEG-1/MPEG-2 format)

+R/+RW (DVD Video format)

Dynamic range:

90 dB

Horizontal resolution:

Wow and flutter:

500 lines

Immeasurable

Cassette deck section

Frequency response

Normal (type I):

50 Hz – 14 000 Hz

0.15% (WRMS)

Wow and flutter:

Download from Www.Somanuals.com. All Manuals Search And Download.

OPTICAL DIGITAL OUTPUT Signals

DIGITAL AUDIO

OUTPUT

Output Signals

Playback disc

STREAM/PCM

DOLBY DIGITAL/PCM

PCM ONLY

DVD Video

with 48 kHz, 16/20/24 bit Linear PCM

with 96 kHz, Linear PCM

with Dolby Digital

48 kHz, 16 bit Linear PCM*

48 kHz, 16 bit Linear PCM

Dolby Digital bitstream

DTS bitstream

48 kHz, 16 bit Linear PCM

with DTS

48 kHz, 16 bit Linear PCM

DVD-VR format discs

with 48 kHz, 16/20/24 bit Linear PCM

with Dolby Digital

48 kHz, 16 bit Linear PCM*

Dolby Digital bitstream

48 kHz, 16 bit Linear PCM

SVCD, VCD, CD

44.1 kHz, 16 bit Linear PCM/48 kHz, 16 bit Linear PCM

DTS bitstream 44.1 kHz, 16 bit Linear PCM

32/44.1/48 kHz, 16 bit Linear PCM

CD with DTS

MP3/WMA/MPEG-1/MPEG-2 disc

* While playing some DVDs, digital signals may be emitted at 20 bits or 24 bits (at their original bit rate) through the OPTICAL

DIGITAL OUTPUT terminal if the discs are not copy-protected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Parts Index

Remote control

Button

Page

Button

TV CHANNEL +/–

Page

Button

Page

Button

DVD/CD 3

Page

8, 10, 17, 18,

19, 25, 28-31

SOUND MODE

SOUND TURBO

SUB TITLE

AUDIO

8, 33

TV VOLUME

TV/VIDEO

VFP

6, 11, 13, 14, ECHO

TAPE A 3

8, 11

8, 11, 27

16, 17, 19,

22-25, 31, 32,

ENTER/SET

6, 9, 11, 13,

14, 22, 23,

25, 32, 33, 34

TAPE B 3

VOLUME

ZOOM

8, 29, 30

17, 25

TITLE/GROUP

4/x

1/y

9-11, 19

9, 10, 17

FADEMUTING

FM MODE

;

Main unit

10, 11, 19, 25, FM/AM

30, 31

8, 9

28-31

Button

Page

Button

DUBBING

Page

KARAOKE*¹

8, 9

10, 17, 19, 25 KEY

4/x

9, 10, 11, 27 DVD/CD #

10, 17, 27,

28-30

Number buttons

9, 10, 11, 18, MENU

23, 31

9, 10, 11, 20, DVD LEVEL

26, 27, 30

ON SCREEN

22, 23

+/–

3D PHONIC

A-B RPT

AHB

FM/AM

MIC jack*¹

8, 9

28-31

10, 17, 27

10, 20

11, 26

PLAY MODE

PREV./NEXT

REPEAT

RESERVE*¹

18, 19

10, 11

20, 25

OPEN/CLOSE0

^{PUSH OPEN}0

MIC LEVEL

PHONES jack

ANGLE

AUDIO/MPX

AUX

15, 29

3D PHONIC

REC START/

STOP

Remote sensor

CANCEL

14, 19, 31, 32, RETURN

ACTIVE BASS

EXTENSION

(

SOUND MODE

SOUND TURBO

TAPE A #

CLOCK/TIMER

DIMMER

14,32,33

SCAN MODE

AUX

SET UP

SHIFT

AUX jack*²

8, 11

8, 11, 27

8, 29, 30

DISPLAY

6, 11, 14,

15-17, 19, 20,

25, 28-31, 36

DEMO

TAPE B #

DISC REC

Display

VOLUME

DVD LEVEL +/–

SLOW +/–

SLEEP

¹Not on the Australian model. *²The Australian model only.

TOP MENU

Remote Control

Main Unit

Download from Www.Somanuals.com. All Manuals Search And Download.

Mains (AC) Line Instruction (not applicable for Europe, U.S.A.,

Canada and U.K.)

CAUTION for mains (AC) line

BEFORE PLUGGING IN, do check that your mains (AC) line

voltage corresponds with the position of the voltage selector

switch provided on the outside of this equipment and, if

different, reset the voltage selector switch, to prevent from a

damage or risk of fire/electric shock.

When your mains (AC) line

voltage is 230-240 V

When your mains (AC) line

voltage is 220 V

When your mains (AC) line

voltage is 110 V

When your mains (AC) line

voltage is 127 V

Download from Www.Somanuals.com. All Manuals Search And Download.

1206WMKMDCJEM

Infinity Digital Photo Frame IW55 RIF User Manual
Ingersoll Rand Septic System 662400 C User Manual
Intel Telephone D850GB User Manual
JVC CD Player RV DP200BK User Manual
JVC Home Theater System UX G6 User Manual
Kettler Exercise Bike 07956 500 User Manual
Kettler Fitness Equipment UM6786 User Manual
Keys Fitness Elliptical Trainer 920D User Manual
KitchenAid Refrigerator 2210725 User Manual
Kodak Printer VX5000 User Manual