07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 14:59 Seite 1
UM6786/UM6787
Trainings- und Bedienungsanleitung
UM 678x
2 – 13
14 – 25
26 – 37
38 – 49
50 – 61
62 – 73
74 – 85
86 – 97
98 – 109
110 – 121
D
GB
F
NL
E
I
PL
CZ
P
DK
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 15
UM6786/UM6787
Brief Description
The electronics has an area of operation with buttons and a display
area (display) with changeable icons and graphics
Display Area
Display
Area of Operation
Buttons,
Rotary Switch (Encoder)
The electronics features the following functions:
• Memory and defaults for 4 people
• 4 training areas:
MANUAL = manual load adjustment,
PROGRAM = default profiles,
PERSONAL = own profile,
H.R.C. = pulse-controlled program
• Training defaults for saveable time, distance, energy consumption, pulse value monitoring
• Monitoring with visual and acoustic information
• Age-dependent target pulse
• Display of a fitness mark from 1 to 6, calculated with the recovery pulse value after 1 minute
• Motor-driven brake stage adjustment
• Own load profile can be saved
• Calculation of the energy consumption according to brake stage and cadence
• Selection of the display for energy consumption [Kjoule or Kcal]
• Temperature display in standby [°C]
• Integrated pulse receiver for uncoded chest strap e.g. T34 from POLAR
15
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 16
Trainingsa-nudndOBpedraietinnugngInssatrnulecittiuongs
Brief Instructions
Area of Operation
The 5 buttons are briefly explained below.
All Buttons
• Display wakes up from standby mode
RECOVERY (recovery pulse with fitness mark)
With this function button, in the case of active pulse measure-
ment, the recovery pulse function is started and a fitness
mark determined.
RESET (press briefly) before the training
With this function button, the current display is cleared.
RESET (press for longer)
• Clear the display for a restart.
Encoder (turn right)
• In the case of selection: jumps one menu item further
• In the case of inputs: increases the input
Encoder (turn left)
• In the case of selection: jumps one menu item further
• In the case of inputs: reduces the input
Encoder (press briefly)
• The selection or input is adopted.
The next menu item is called up.
Encoder (press for longer)
• The training selection of the current person is displayed
again.
or
• The display is cleared with subsequent program or person
selection.
Kjoule > Kcal > Kjoule
RESET + Encoder (at the same time)
• Conversion of the energy consumption from Kilojoules to Kilo-
calories
START STOP
• Start of training. The training time counts upwards.
• Training stop with STOP display. The training time is paused.
The average Ø of the brake stages is briefly displayed.
QUICK START
• “MANUAL” program is started. The training time counts
upwards.
Pulse Measurement
Your pulse can be measured using 3 sources:
1. Ear clip
2. Hand pulse sensors
3. Chest strap
16
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 17
UM6786/UM6787
Display Area /Display
The display informs about the different functi-
ons.
Program selection from 4 training areas
MANUAL: The load stages are adjusted manually by the person training.
PROGRAM: 12 programs (profiles) adjust the load stages.
PERSONAL: Own profile adjusts the load stages
H.R.C.: The program for pulse training with the default of a training pulse
Person (USER)
U0 = guest, U1-U4
AGE
Load profile
Level = stage1-16
Start position = left
Age: 10-99
PULSE
Pulse Display
40 - 220
55%, 75%,
90%, Tag
Calculated pulse
values according to
age
TIME
Training time
Display
0:00 > 99:59
99:00 > 0:00
STOP
RPM
Cadence
Display
14 – 199
SPEED
Speed
Display
- 99,9 km/h
DISTANCE
Distance
Display
0:00 > 99:59
99:00 > 0:00
Kcal Kjoule
Energy consumption
Display
0 > 9999
9990 > 0
Break
Interruption to training
Standby mode with temperature display
The cadence in the instructions refers to a home trainer
60 rpm = 21.3 km/h.
In the case of a crosstrainer, the assignment is
60 rpm = 9.5 km/h
17
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 18
Training and Operating Instructions
Quick Start (For Familiarising)
Quick Start:
Without Particular Settings
• Press “QUICKSTART”.
Last user is displayed
or
Select person
“MANUAL” programme is started. The training time
counts upwards.
• Pedal
Cadence, speed, distance and energy consumption count
upwards. Pulse, if a pulse measurement is active.
The current bar changes every 15 seconds.
Changing Load
• “Encoder right”
Load is increased in single steps.
• “Encoder left”
Load is decreased in single steps.
Interruption to Training
• Press “START STOP”
The average value (Ø) of the load is briefly displayed.
Cadence and speed display “0 values”
The training time TIME and STOP are displayed as flas-
hing.
Continuing Training
• Press “START STOP”
• Pedal
or
End of Training and Standby Mode
The display switches to standby mode with temperature
display 4 minutes after training has ended.
It is possible to continue the last training session if the dis-
play is reactivated by pressing a button or pedalling.
18
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 19
UM6786/UM6787
MANUAL Training Area
(Manual Load Adjustment)
Flashing areas can be changed.
• Turn “Encoder” to change.
• Press “Encoder” to adopt.
Inputting Personal Data
• Actuate “Button” or “Encoder”.
Last user is displayed as flashing.
Determine person
Adopt person (here, Person1)
Input age
From the age input, the target pulse value is calculated in
the H.R.C program according to the relationship of 220
minus age.
Adopt age (here, 50)
Training Selection
Set MANUAL training area
Adopt MANUAL
Specifying Training Values
Skip load (brake stage) or determine and adopt load
(here; stage 8)
Skip training time or determine and adopt training time
(here, stage of 20:00 minutes)
The set training time is converted to 16 profile bars. If no
time is specified, the current bar changes every 15
seconds.
Skip distance or determine and adopt distance
(here, 7.00 km)
Skip energy consumption or determine and adopt energy
consumption
(here, 300 Kjoules)
Skip pulse value or determine and adopt pulse value
Again, training time, etc. (here, 130 strokes/min)
Training
• Press “START STOP”
• Pedal
Defaults for time, distance, energy consumption count
downwards. In the case of active pulse measurement, the
pulse is monitored and the value flashes if it is exceeded
as a warning.
Changing Load
• “Turn Encoder right or left”
Load is increased or reduced
Interruption to Training
• Press “START STOP”
The average value (Ø) of the load is briefly displayed.
Cadence and speed display “0 values”.
The training time and STOP are displayed as flashing.
Continuing Training
• Press “START STOP”
• Pedal
19
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 20
Training and Operating Instructions
Comment:
If a default is reached (0 value flashes, 8 signal tones), the dis-
play shows interruption to training with flashing time display
and STOP. The default values are displayed again. With the
“START STOP” button and pedalling, the display is active again
until the next default is reached.
PROGRAM Training Area
Selection from 12 programs (profiles) which automatically adjust
the load stages.
Input or confirm personal data
Select PROGRAM
Selection from 12 programs
(Here, P1)
Specifying Training Values
Skip training time or determine and adopt training time
(Here, 16:00 minutes)
The set training time is converted to 16 profile bars. In the case
of 16 minutes, one bar corresponds to 1 minute. If no time is
specified, the current bar changes every 15 seconds.
Skip distance or determine and adopt distance
Skip energy consumption or determine and adopt energy con-
sumption
Skip pulse value or determine and adopt pulse value
Again, training time, etc.
Training
• Press “START STOP”
• Pedal
Defaults for time, distance, energy consumption count
downwards. In the case of active pulse measurement, the pulse
is monitored and the value flashes if it is exceeded as a war-
ning.
Changing Load
• “Turn Encoder right or left”
Load is increased or reduced
Interruption to Training
• Press “START STOP”
The average value (Ø) of the load is briefly displayed.
Cadence and speed display “0 values”.
The training time and STOP are displayed as flashing.
Continuing Training
• Press “START STOP”
• Pedal
20
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 21
UM6786/UM6787
PERSONAL Training Area
Create and train own profile
Input or confirm personal data
Select PERSONAL
There are 2 options: Creating the profile before training or
during training.
Creating Profile Before Training
The first profile bar flashes and can be changed.
• Turn “Encoder” to change.
• Press “Encoder” to adopt the load and jump to the next bar
• Press “Encoder” for longer (doing this saves the profile)
Training time flashes and can be changed. (Here, 16:00 minu-
tes). The set training time is converted to 16 profile bars. In the
case of 16 minutes, one bar corresponds to 1 minute. If no time
is specified, the current bar changes every 15 seconds.
Skip distance or determine and adopt distance
Skip energy consumption or determine and adopt energy con-
sumption
Skip pulse value or determine and adopt pulse value
Again, training time, etc.
Training
• Press “START STOP”
• Pedal
Defaults for time, distance, energy consumption count
downwards. In the case of active pulse measurement, the pulse
is monitored and the value flashes as a warning if it is excee-
ded.
Creating Profile During Training
The first profile bar flashes and can be changed.
• Press “Encoder” for longer
Training time flashes and can be changed. (Here, 16:00 minu-
tes)
Training
• Press “START STOP”
• Pedal
• “Turn Encoder right or left”
Load is increased or reduced
When jumping to the next bar, the stage is saved. If the time
default is reached (0 value flashes, 8 signal tones), the display
shows interruption to training with flashing time display and
STOP. The default values are displayed again. The profile is
saved.
With the “START STOP“ button and pedalling, the display is acti-
ve again.
Comment:
When the PERSONAL training area is called up, the own profile
is displayed.
21
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 22
Training and Operating Instructions
H.R.C Training Area
Pulse-Controlled Program
If the current pulse is lower than the target pulse, the load is
increased by one stage following 30 seconds. If it is higher, the
load is reduced by one stage following 15 seconds.
Input or confirm personal data
Select H.R.C.
Specifying Target Pulse
There are 4 target pulse values, with 55%, 75%, 90% and Tag,
to choose from. The pulse values to be displayed are calculated
from the relationship of 220 minus the input age. In the case of
50 years, in the case of 55% = 96, 75% = 132, 90% = 158,
Tag = 170 is displayed.
The “Tag” value can be changed.
55% flashes and can be changed.
• Turn “Encoder” to select the target pulse.
• Press “Encoder” to adopt the target pulse.
In the case of Tag, the value flashes and can be changed.
After specifying the target pulse, the pulse selection icon is dis-
played together with the current pulse.
Training time TIME flashes and can be changed. (Here, 16:00
minutes).
Skip distance or determine and adopt distance
Skip energy consumption or determine and adopt energy con-
sumption
Again, training time, etc.
Training
• Press “START STOP”
• Pedal
The first profile bar flashes and moves to the right during trai-
ning.
Defaults for time, distance, energy consumption count
downwards.
The load stages are increased until the target pulse is reached.
Comment:
If the pulse measurement fails during the H.R.C. program, the
load is reduced to stage 1 within 60 seconds.
If the stage 1 remains unchanged for 30 seconds, brief signal
tones are output and the display shows interruption to training
with flashing STOP
22
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 23
UM6786/UM6787
RECOVERY Recovery pulse stage
The RECOVERY function can be used after each exercise
program.
The RECOVERY button is used to initiate recovery pulse
measurement at the end of exercising. Initial and final pulse
during one minute are used to calculate deviation and a fit-
ness score. In case of equal exercising, improvement of such
score is a measurement for increase of fitness.
When reaching the target values, end exercising and press
the RECOVERY button; then, leave your hands at the hand
pulse sensors. In case of previous pulse measurement, the
display shows 00:60 for time, and the PULSE display shows
the current pulse value (flashing). The countdown starts at
00:60. Leave your hands at the hand pulse sensors until the
countdown reaches >0<. The display will show on its right a
value between F1 and F6. F1 is the best status; F6 is the
worst status. The function can be ended by pressing again
RECOVERY.
If no pulse is recorded during the time delay, the error message
“Err” appears.
End of Training and Standby Mode
The display switches to standby mode with temperature display
4 minutes after training if there are no longer any buttons being
pressed, no pulses arise owing to pedalling and no pulse is acti-
ve.
It is possible to continue the last training session if the display is
reactivated by pressing a button or pedalling.
23
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 24
Training and Operating Instructions
• Attach the ear clip properly to your earlobe and look
for the best point for the measurement (heart symbol
blinks without interruption).
General information
System signals
• Do not train directly under strong incidence of light,
e.g. neon light, halogen light, spotlight, sun light.
Activation of the device
• Completely eliminate any shocks or bounces of the ear
sensor and the cable. Always attach the cable with a
clip at your clothing or, even better, at your headband.
If you activate the device, a signal is emitted during the seg-
ment test.
Presetting
With breast clip
The internal pulse receiver is compatible to un-coded
POLAR chest strap transmitters. For coded systems, wrong
pulse values may be displayed. We recommend T34 by
POLAR. Please observe the corresponding instructions.
A short signal is emitted, if you reach a presetting like time,
distance and KJoule/kcal.
Exceeding of maximum pulse
If the set maximum pulse is exceeded by one pulse beat, two
short signals are emitted for the time of exceedance.
A plug-in receiver is not necessary and should not be used
for technical reasons.
Calculation of fitness score
The computer calculates and assess the difference bet-
ween the training and recovery heart rate and the resul-
ting "fitness score" according to the following formula:
Comment:
Only one way of pulse measurement is possible: either
with ear clip or with hand pulse or with breast belt. If no
ear clip is located in the pulse plug, hand pulse measure-
ment is activated. If you insert an ear clip in the pulse
plug, hand pulse measurement is automatically deactivat-
ed. It is not necessary to disconnect the plug of the hand
pulse measurement.
2
Score (F) = 6 – 10 x (P1 – P2)
(
)
P1 = Training pulse
Score 1 = very good
P2 = Recovery pulse
Score 6 = poor
A comparison of the training and recovery heart rate is a
quick and easy way in which to determine physical fit-
ness. The fitness score is an orientation value to asses
your recovering ability after physical exercise. Before
pressing the recovery heart rate button and determining
your fitness score, you should train at your own level of
intensity for a significant period of time e.g. 10 minutes.
For regular cardiovascular training you will discover that
your "fitness score" improves.
Faults in the Training Computer
If the computer display is not functioning correctly, please
remove the power supply and switch off the machine.
Possibilities for Pulse Measurement
The pulse measurement starts as soon as the heart in the
display blinks in time with your pulse beat.
ꢀ
ꢀ
ꢀ
With hand pulse
An extra-low voltage caused by the contractions of your
heart is registered by the hand sensors and evaluated by
the electronics assembly of the device.
optional
• Always grab the contact faces with both hands.
• Avoid jerky grasping.
optional
optional
• Hold your hands calmly and avoid contractions and
rubbing on the contact faces.
With ear clip
For Your Safety:
The pulse sensor works with infrared light and measures
the variations in translucence in your skin, which are pro-
duced by your pulse beat. Rub your ear ten times strongly
to activate the blood circulation before attaching the
pulse sensor to your earlobe.
Before beginning your program of exercise, consult your
doctor to ensure that you are fit enough to use the equip-
ment. Base your program of exercise on the advice given
by your doctor. Incorrect or excessive exercise may dama-
ge your health.
Avoid disturbing pulses.
24
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:00 Seite 25
UM6786/UM6787
Training Instructions
This device has particularly been designed and developed
for leisure time sportsmen. It is excellently suited for cardio-
vascular training.
Beginners should not start with training units of 30 to 60
minutes.
A beginner training could be organised as follows during the
first four weeks:
Training frequency
Extent of training session
The training methodically has to be organised on the princi-
ples of stamina training. This will predominantly cause
changes and adaptations of the cardiovascular system. This
includes the reduction of the resting pulse frequency and of
the load pulse.
1st week
3 times a week
2 minutes of training
Break of 1 minute for physical exercises
2 minutes of training
This gives the heart more time for filling the ventricles and for
the blood circulation of the cardiac musculature (through the
coronary vessels . Moreover, depth of breathing and the
volume of air that can be breathed in (vital capacity) are
increased. Further positive changes take place in the metabo-
lic system. In order to achieve these positive changes, the
training has to be planned according to certain guidelines.
Break of 1 minute for physical exercises
2 minutes of training
2nd week
3 times a week
3 times a week
3 times a week
3 minutes of training
Break of 1 minute for physical exercises
3 minutes of training
Break of 1 minute for physical exercises
2 minutes of training
Planning and control of your training
The basis for your training planning is your current physical
fitness condition. Your family doctor can diagnose your per-
sonal fitness by means of an exercise tolerance test, which
will constitute the basis for your training planning. If you
have not undergone an exercise tolerance test, high training
exertion and/or overstraining must be avoided in all cases.
The following rule should be considered in your planning:
stamina training is controlled via the scope of exertion as
well as via the level / intensity of exertion.
3rd week
4 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
Break of 1 minute for physical exercises
3 minutes of training
4th week
5 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
Regarding exertion intensity
The intensity of exertion should preferably be checked in
your fitness training via your heart’s pulse rate. The maximum
heart rate per minute of > 220 minus age must not be excee-
ded. The optimum training pulse is determined by age and
training target.
In order to have a personal training documentation, you can
enter the training values achieved in the performance table.
Prior to and after every training unit gymnastic exercises
lasting approx. 5 minutes serve the warming up and/or coo-
ling down. There should be a day without training between
two training units, if you later on prefer to train three times a
week for 20 - 30 minutes each. Otherwise nothing can be
said against a daily training.
Training target: fat burning/weight reduction
The optimum pulse frequency is calculated using the empi-
rical formula (220 – age) x 0.65.
Advice: fat burning for energy supply only gains signifi-
cance after a minimum training period of 30 minutes.
Training target cardio-vascular fitness:
The optimum pulse frequency is calculated using the empiri-
cal formula (220 – age) x 0.75.
Pulsediagramm
Pulse
Fitness and Fat Burner
220
Maximalpulse
(220 minus Age)
200
The intensity is predetermined in your training by means of
the braking levels, ranging from 1-16. As a beginner, you
should avoid too high braking level settings for your training,
as this will quickly lead to exceeding the recommended pulse
rate range. Start by using a low braking level setting and
then approach your optimum training pulse step by step. Do
not forget to regularly check during your fitness training whet-
her you still range within the intensity area according to the
above stated recommendations.
180
160
Fitnesspulse
(75% of Max.Pulse)
140
120
100
Fat combustion pulse
(65% of Max.Pulse)
80
Age
20 25 30 35 40 45 50 55 60 65 70 75 80 90
Sports physicians consider the following load factors to be
positive for fitness:
Frequency
daily
2-3 times weekly
1-2 times weekly
Duration
10 min
20-30
min
min
30-60
25
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:01 Seite 122
Leistungstabelle
– GB – Performance table
– E – Table de rendimiento
– F – Tableau de performances
– NL – Prestatientabel
P 1
P 2
Belastungs-
stufe
Zeit
(min.)
Time
Entfernung
(km)
Energie-
Fitness-
note
– D – Datum
– GB – Date
Ruhepuls
Restpulse
Belastungspuls Erholungspuls
verbrauch
Stress pulse
Recovery pulse
Slope
Distance
(km)
Energy consumption Fitness Mark
(min)
(Kcal)
– F – Date
– NL – Datum
– E – Fecha
Pouls au repos
Rustpols
Pouls en change Pouls de récupération
Belastingspols Ontspanningspols
Ange d’inclination
Hellingshoek
Temps
(mn.)
Tijd
(min.)
Tiempo
(min.)
Distance
Dépense d’énergie
Note
(km)
(Kcal)
Afstand
(km)
Distancia
(km)
Calorieenverbruik
(Kcal)
Waard. cijfer
Pulso en reposo Pulso bajo esfuerzoPulso de recuperación
Escalón
de carga
Consumo de energia
(Kcal)
Nota
122
D
Download from Www.Somanuals.com. All Manuals Search And Download.
07628-,07648-_Comp-UM678x_3074-0212.de,en,fr,nl,es,it,pl,pt,da,cs_Layout 1 23.02.13 15:02 Seite 124
HEINZ KETTLER GmbH & Co. KG
Postfach 1020 . D-59463 Ense-Parsit
docu 3074a/02.13
Download from Www.Somanuals.com. All Manuals Search And Download.
|