JVC Speaker System UX G66R User Manual

MICRO COMPONENT SYSTEM  
UX-G66R  
Consists of AX-UXG66, XT-UXG66R,  
TD-UXG66, and SP-UXG66.  
STEREO AMPLIFIER  
AX-UXG66  
COMPACT DISC/TUNER  
XT-UXG66R  
CASSETTE DECK  
TD-UXG66  
SPEAKER SYSTEM  
SP-UXG66  
OPEN/CLOSE  
STANDBY/ON  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
FM/AM  
AUX  
MULTI JOG  
VOLUME  
MOS  
-
FET  
REMOTE CONTROL RM-SUXG6R  
PANEL  
OPEN/CLOSE DIMMER  
1
B
I
T
P
E
M
D
D
C
O
N
V
E
R
T
E
R
ACTIVE  
BASS EX. CLOCK/TIMER SLEEP  
BASS  
TREBLE FM MODE  
PHONES  
COMPACT  
PLAY MODE REPEAT  
AUTO PRESET  
DIGITAL AUDIO  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
/CHARA.  
CANCEL  
UP  
SET  
<
>
DOWN  
MD  
AUX  
CD  
TAPE  
FM/AM  
DOLBY  
B
NR  
4
7
¢
+
VOLUME  
REC PAUSE  
AUTO  
REVERSE  
REC  
INSTRUCTIONS  
For Customer Use:  
Enter below the Model No. and Serial  
No. which are located either on the rear,  
bottom or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No.  
LVT0705-003A  
[B]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT FOR LASER PRODUCTS  
REPRODUCTION OF LABELS  
2
WARNING LABEL, PLACED INSIDE THE UNIT  
1
CLASSIFICATION LABEL, PLACED ON EXTERIOR  
SURFACE  
DANGER: Invisible laser  
radiation when open and  
interlock failed or defeated.  
AVOID DIRECT EXPOSURE  
VARNING: Osynlig laser-  
strålning när denna del är  
öppnad och spärren är  
urkopplad.  
strålen.  
Betrakta  
ej  
(s)  
TO BEAM.  
(e)  
CLASS  
LASER  
1
ADVARSEL: Usynlig laser-  
stråling ved åbning, når  
sikkerhedsafbrydere er ude  
af funktion. Undgå udsæt-  
VARO: Avattaessa ja suo-  
jalukitus ohitettaessa olet  
PRODUCT  
alttiina  
lasersäteilylle. Älä katso  
säteeseen. (f)  
näkymättömälle  
telse for stråling  
(d)  
1. CLASS 1 LASER PRODUCT  
IMPORTANT for the U.K.  
2. DANGER: Invisible laser radiation when open and interlock  
failed or defeated. Avoid direct exposure to beam.  
3. CAUTION: Do not open the top cover. There are no user  
serviceable parts inside the Unit; leave all servicing to  
qualified service personnel.  
DO NOT cut off the mains plug from this equipment. If the  
plug fitted is not suitable for the power points in your  
home or the cable is too short to reach a power point,  
then obtain an appropriate safety approved extension  
lead or consult your dealer.  
BE SURE to replace the fuse only with an identical  
approved type, as originally fitted.  
CAUTION  
Do not block the ventilation openings or holes.  
(If the ventilation openings or holes are blocked by a  
newspaper or cloth, etc., the heat may not be able to  
get out.)  
If nontheless the mains plug is cut off ensure to remove  
the fuse and dispose of the plug immediately, to avoid a  
possible shock hazard by inadvertent connection to the  
mains supply.  
Do not place any naked flame sources, such as lighted  
candles, on the apparatus.  
When discarding batteries, environmental problems  
must be considered and local rules or laws governing  
the disposal of these batteries must be followed  
strictly.  
If this product is not supplied fitted with a mains plug then  
follow the instructions given below:  
IMPORTANT:  
DO NOT make any connection to the terminal which is  
marked with the letter E or by the safety earth symbol or  
coloured green or green-and-yellow.  
Do not use this apparatus in a bathroom or places with  
water. Also do not place any containers filled with  
water or liquids (such as cosmetics or medicines,  
flower vases, potted plants, cups, etc.) on top of this  
apparatus.  
The wires in the mains lead on this product are coloured  
in accordance with the following code:  
Blue :  
Neutral  
Brown : Live  
As these colours may not correspond with the coloured  
markings identifying the terminals in your plug proceed as  
follows:  
The wire which is coloured blue must be connected to the  
terminal which is marked with the letter N or coloured  
black.  
The wire which is coloured brown must be connected to  
the terminal which is marked with the letter L or coloured  
red.  
IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.  
G-2 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
We would like to thank you for purchasing one of our JVC products.  
Before operating this micro component system, read this manual carefully  
and thoroughly to obtain the best possible performance from your system,  
and retain this manual for future reference.  
Power sources  
• When unplugging from the wall outlet, always pull the  
About This Manual  
plug, not the AC power cord.  
This manual is organized as follows:  
DO NOT handle the AC power cord with wet  
hands.  
• The manual mainly explains operations using the buttons  
and controls on the units.You can also use the buttons on  
the remote control if they have the same or similar names  
(or marks) as those on the units.  
If operation using the remote control is different from  
that using each unit, it is then explained.  
Moisture condensation  
Moisture may condense on the lens inside the units in the  
following cases:  
• Basic and common information that is the same for many  
functions is grouped in one place, and is not repeated in  
each procedure. For instance, we do not repeat the  
information about turning on/off the system, setting the  
volume, changing the sound effects, and others, which  
are explained in the section “Basic Settings” and  
“Common Operations” on pages 10 to 13.  
• After starting heating in the room  
• In a damp room  
• If the units are brought directly from a cold to a warm  
place  
Should this occur, the system may malfunction. In this case,  
leave the units turned on for a few hours until the moisture  
evaporates, unplug the AC power cord, and then plug it in  
again.  
• The following marks are used in this manual:  
Gives you warnings and cautions to  
prevent from a damage or risk of fire/  
electric shock.  
Also gives you information which is not  
good for obtaining the best possible  
performance from the units.  
Others  
• Should any metallic object or liquid fall into a unit, unplug  
the units and consult your dealer before operating any  
further.  
• If you are not going to operate the units for an extended  
period of time, unplug the AC power cord from the wall  
outlet.  
Gives you information and hints you had  
better know.  
DO NOT disassemble the units since there are  
no user serviceable parts inside.  
If anything goes wrong, unplug the AC power cord and  
consult your dealer.  
Precautions  
Installation  
• Install in a place which is level, dry and neither too hot  
nor too cold — between 5˚C (41˚F) and 35˚C (95˚F).  
• Install the units in a location with adequate ventilation to  
prevent internal heat buildup in the units.  
• Leave sufficient distance between the units and the TV.  
• Keep the speakers away from the TV to avoid interference  
with TV.  
DO NOT install the units in a location near heat  
sources, or in a place subject to direct sunlight,  
excessive dust or vibration.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Introduction .......................................................... 1 Playing Back a Tape ........................................... 24  
About This Manual ............................................................... 1  
Precautions ........................................................................... 1  
Playing Back a Tape — Basic Operation ........................... 24  
Fast-Winding a Tape ........................................................... 25  
Searching and Skipping to Each Program  
Contents ................................................................. 2  
— Music Scan ................................................................ 25  
Playing Back Dolby-Recorded Tape .................................. 25  
Location of the Buttons and Controls ................. 3  
Recording onto a Tape........................................ 26  
Front Panels .......................................................................... 4  
Remote Control .................................................................... 5  
Manual Recording onto a Tape........................................... 26  
Recording in Auto Reverse ................................................. 27  
Synchronized Recording from a CD .................................. 28  
Recording from the external equipment ............................. 28  
Getting Started...................................................... 6  
Unpacking ............................................................................ 6  
Putting the Batteries into the Remote Control...................... 6  
Connecting the System Control Cables and the External  
Wire .................................................................................. 6  
Connecting MD Recorder XM-G6 ....................................... 7  
Connecting Sub Woofer System ........................................... 7  
Connecting Antennas ............................................................ 7  
Connecting Speakers ............................................................ 8  
Connecting Other Equipments ............................................. 9  
Using the Timers ................................................. 29  
Using Recording Timer ...................................................... 29  
Using Daily Timer .............................................................. 30  
Using Sleep Timer .............................................................. 32  
Timer Priority ..................................................................... 32  
Maintenance and Additional Information........ 33  
Handling CDs ..................................................................... 33  
Handling Cassette Tapes..................................................... 34  
Types of Cassette Tapes ...................................................... 34  
Basic Settings ...................................................... 10  
Setting the Clock ................................................................ 10  
Setting the Display Illumination (Dimmer)........................ 10  
Troubleshooting .................................................. 35  
Specifications....................................................... 36  
Common Operations .......................................... 11  
Turning On the Power and Selecting the Sources .............. 11  
Adjusting the Volume ......................................................... 11  
Reinforcing the Bass Sound ............................................... 12  
Adjusting Bass and Treble Sounds ..................................... 12  
Operating the Sliding Panel................................................ 13  
Listening to the External Equipment .................................. 13  
Listening to FM and AM Broadcasts ................ 14  
Tuning in a Station ............................................................. 14  
Presetting Stations .............................................................. 15  
Receiving FM Stations with RDS ...................... 16  
Changing the RDS Information.......................................... 16  
Searching for Programs by PTY Codes (PTY Search) ...... 17  
Switching to a Program Type Temporarily......................... 17  
Playing Back a CD .............................................. 20  
Playing Back the Entire Disc — Normal Play ................... 20  
Searching and Skipping Tracks .......................................... 21  
Programing the Playing Order of the Tracks  
— Program Play ............................................................. 21  
Playing at Random — Random Play.................................. 23  
Repeating Tracks — Repeat Play ....................................... 23  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location of the Buttons and Controls  
Become familiar with the buttons and controls on the units.  
Front Panels  
OPEN/CLOSE  
STANDBY/ON  
AX-UXG66  
Stereo Amplifier  
1
2
3
4
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
5
6
AUX  
FM/AM  
MULTI JOG  
VOLUME  
MOS - FET  
7
XT-UXG66R  
Compact Disc  
/Tuner  
8
q
w
e
1
B
I
T
P • E • M D • D • C  
O
N
V
E
R
T
E
R
9
p
PHONES  
COMPACT  
DIGITAL AUDIO  
TD-UXG66  
Cassette Deck  
i
r
t
y
DOLBY  
B
NR  
o
;
a
REC PAUSE  
AUTO  
REVERSE  
REC  
u
Display window  
REC  
BASS  
2
5
1
3
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Front Panels  
Buttons behind the sliding panel  
1 2 3 4 5 6 7 8 9 p  
AX-UXG66  
Stereo Amplifier  
1
button and STANDBY/ON lamp (11)*  
2 MULTI JOG dial  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
4
SET  
¢
CANCEL  
ENTER  
3 FM/AM button (14)*  
4 OPEN/CLOSE button (13)*  
5 Display window  
6 VOLUME dial (11)  
7 AUX button (13, 28)*  
ST  
ANDBY/ON  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
FM/AM  
S
Y
S
T
E
M
U
X
-
G
6
6
R
XT-UXG66R  
8 CD tray  
Compact Disc/Tuner  
MUL  
TI  
JOG  
OPEN/CLOSE  
MOS - FET  
9 Remote sensor (5)  
p PHONES jack (12)  
q 0 (open/close) button for CD tray (20)*  
w 6 (play/pause) button (21)*  
e 7 (stop) button (21)  
V
OLUME  
AU  
X
TD-UXG66  
Cassette Deck  
1 DISPLAY/CHARA. button (16)  
2 4 button (14, 21, 22, 25)  
3 ¢ button (14, 21, 22, 25)  
4 SET button (22, 29)  
5 CANCEL button (10, 22, 29)  
6 ENTER button **  
7 PLAY MODE button (21)  
8 REC MODE button (28)  
9 TITLE/EDIT button **  
p CLOCK/TIMER button (10, 29)  
r (auto-reverse) button and lamp (24, 27)  
t DOLBY B NR button and lamp (25, 27)  
y REC PAUSE button (26)  
u Tape operations indicators (24, 26)  
• Tape direction (2 / 3) and REC indicators  
i 0 (open/close) button for Tape tray (24)*  
o ` (playback) button (24)*  
; 7 (stop) button (25)  
a Tape tray  
** Used only with MiniDisc recorder XM-G6  
(not supplied).  
To press the buttons suffixed with * mark also  
turns on the system.  
DO NOT operate any button and control until  
the system setup is completed.  
DO NOT operate the sliding panel by hands,  
otherwise it will cause serious damages on the  
sliding mechanism (see page 13).  
Display window  
1 Timer mode indicators  
REC (recording timer) and  
timer) indicators  
DAILY (daily  
2 CD playback mode indicators  
• PROGRAM, RANDOM,  
(repeat 1),  
and  
(repeat all) mode indicators  
3 FM mode indicators  
• STEREO and MONO indicators  
4 BASS indicator  
5 RDS mode indicators  
• RDS, EON, and TA/NEWS/INFO indicators  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Become familiar with the buttons on the remote control.  
Remote Control  
Remote Control  
1 PANEL OPEN/CLOSE button (13)  
2 CLOCK/TIMER button (10, 29)  
3 ACTIVE BASS EX. (extension) button (12)  
4 TREBLE button (12)  
5 BASS button (12)  
6 REPEAT button (23)  
7 PLAY MODE button (21)  
8 TITLE/EDIT button *  
9 PTY/EON button (17)  
p UP button (12, 14, 21)  
q DISPLAY/CHARA. button (16)  
w SET button (22, 29)  
REMOTE CONTROL RM-SUXG6R  
PANEL  
;
a
OPEN/CLOSE  
DIMMER  
1
3
5
7
9
ACTIVE  
2
4
6
8
p
SLEEP  
CLOCK/TIMER  
BASS EX.  
s
d
f
g
BASS  
TREBLE FM MODE  
PLAY MODE REPEAT  
AUTO PRESET  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
CANCEL  
/CHARA.  
e < (left cursor) button (10, 21, 29)  
r DOWN button (12, 14, 21)  
t MD 6 (play/pause) button *  
y FM/AM button (14)  
UP  
q
e
t
h
j
k
w
r
SET  
<
>
DOWN  
FM/AM  
u TAPE ` (playback) button (24)  
MD  
AUX  
CD  
i 7 (stop) button (21, 25)  
y
i
TAPE  
o 4 button (14, 21, 22, 25)  
; DIMMER button (10)  
l
/
u
o
a
(standby/on) button (11)  
s SLEEP button (32)  
d FM MODE button (15)  
f AUTO PRESET button (15)  
g ENTER button *  
VOLUME  
z
h CANCEL button (10, 22, 29)  
j > (right cursor) button (10, 21, 29)  
k AUX button (13, 28)  
l CD 6 (play/pause) button (21)  
/ ¢ button (14, 21, 22, 25)  
z VOLUME +/button (11)  
OPEN/CLOSE  
STANDBY/ON  
* Used only with MiniDisc recorder XM-G6 (not  
supplied).  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
FM/AM  
AUX  
MULTI JOG  
VOLUME  
MOS FET  
-
1
B
I
T
P
E
M
D
D
C
O
N
V
E
R
T
E
R
Remote  
Sensor  
To operate the system correctly using the remote  
control  
Before using these buttons:  
PHO
COMPACT  
DIGITAL AUDIO  
For Tuner operations, press FM/AM button on the  
remote control first.  
DOLBY  
B
NR  
REC  
P
AUSE  
AUTO  
REVERSE  
REC  
For CD operations, press CD 6 (play/pause)  
button on the remote control first.  
For Tape operations, press TAPE 23 (playback)  
button on the remote control first.  
REMOTE CONTROL RM-SUXG6R  
PANEL  
OPEN/CLOSE DIMMER  
ACTIVE  
BASS EX. CLOCK/TIMER SLEEP  
BASS  
TREBLE FM MODE  
PLAY MODE REPEAT  
AUTO PRESET  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
/CHARA.  
CANCEL  
When using the remote control, point it at  
the remote sensor on the front panel.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Unpacking  
Connecting the System Control Cables and  
the External Wire  
After unpacking, check to be sure that you have all the  
following items.  
The number in the parentheses indicates the quantity of the  
pieces supplied.  
UX-G66R micro component system consists of three units,  
AX-UXG66 StereoAmplifier, XT-UXG66R Compact Disc/  
Tuner, TD-UXG66 Cassette Deck, and SP-UXG66 Speaker  
System.  
• AM loop antenna (1)  
• FM antenna (1)  
• Remote control (1)  
• Batteries (2)  
• Speaker cords (2)  
• External wire (1)  
You can easily connect these units using the system control  
cables equipped on the rear panel of the units.  
To prevent malfunction, connect the external wire as  
illustrated.  
If any is missing, consult your dealer immediately.  
AX-UXG66  
FROM CONNECTOR-A  
External wire  
Putting the Batteries into the Remote  
Control  
(supplied)  
XT-UXG66R  
1
Insert the batteries — R6P (SUM-3)/AA (15F) — into the  
remote control, by matching the polarity (+ and –) on the  
batteries with the + and – markings on the battery  
compartment.  
TO CONNECTOR-A  
FROM CONNECTOR-B  
2
TD-UXG66  
TO CONNECTOR-B  
3
When the remote control can no longer operate the units,  
replace both batteries at the same time.  
DO NOT change vertical stacking order of the  
units as illustrated to avoid heat buildup.  
1
R6P(SUM-3)/AA(15F)  
To connect the cables, press the middle of the connector  
body until it clicks into the connector on the rear panel.  
To disconnect, if needed, pull the connector out pushing  
both sides of the connector body. Never pull out the cables  
themselves.  
2
3
To connect  
To disconnect  
DO NOT use an old battery together with a new  
one.  
DO NOT use different types of batteries together.  
DO NOT expose batteries to heat or flame.  
DO NOT leave the batteries in the battery  
compartment when you are not going to use the  
remote control for an extended period of time.  
Otherwise, it will be damaged from battery  
leakage.  
When connecting the system control cables to  
the connectors  
Make sure to connect the cable to the connector  
having the same name such as “FROM  
CONNECTOR-A” and “TO CONNECTOR-A.”  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Connecting MD Recorder XM-G6  
Connecting Antennas  
You can also connect the MD recorder XM-G6 (not  
supplied), specifically designed for UX-G66R. This unit will  
complete UX-G66R micro component system.  
When you connect and use this unit, refer to the Instructions  
supplied with it for details.  
Supplied FM antenna  
ANTENNA  
AM  
LOOP  
FM 75  
External wire  
COAXL  
(supplied with XM-G6)  
AX-UXG66  
External wire  
(supplied with UX-G66R)  
XT-UXG66R  
FROM CONNECTOR-C  
1 Attach the FM antenna to the FM 75 COAXIAL  
terminal on the rear panel of XT-UXG66R.  
2 Extend the FM antenna.  
XM-G6  
TO CONNECTOR-C  
3 Fasten it up in the position which gives you the  
best reception.  
Optical digital cable  
(supplied with XM-G6)  
About the supplied FM antenna  
The FM antenna supplied with this unit can only be  
used as temporary measure. If reception is poor,  
you can connect an outdoor FM antenna.  
DO NOT install XM-G6 until you turn off the  
system and unplug the AC power code, otherwise  
installation should fail to damage the system.  
DO NOT change the vertical stacking order of XM-  
G6 as illustrated to avoid heat buildup.  
To connect an outdoor FM antenna  
Before connecting it, disconnect the supplied FM antenna.  
Outdoor FM antenna  
(not supplied)  
Connecting Sub Woofer System  
When using JVC external sub woofer system, connect  
audio cable between AX-UXG66’s SUB WOOFER OUT  
jack and the input of your sub woofer system.  
ANTENNA  
SUBWOOFER OUT  
AM  
LOOP  
FM 75  
COAXIL  
AX-UXG66  
AX-UXG6  
Sub Woofer System  
A 75antenna with coaxial type connector  
(DIN 45325) should be used.  
(not supplied)  
Audio cable  
(not supplied)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
AM antenna  
Connecting Speakers  
You can connect the speakers using the speaker cords.  
1
2, 3  
Vinyl-covered wire  
(not supplied)  
ANTENNA  
Red  
AM  
LOOP  
Speaker Cord  
Speaker Cord  
AM  
EXT  
FM 75  
COAXIAL  
SPEAKERS  
RIGHT LEFT  
Black  
AM loop antenna (supplied)  
Right speaker  
Left speaker  
1 Connect the AM loop antenna to the AM LOOP  
1 Open the speaker terminal.  
terminals as illustrated.  
2 Insert the end of the speaker cord to the terminal.  
Match the polarity of the speaker terminals: Red (+)  
to red (+) and black (–) to black (–).  
2 Turn the AM loop antenna until you have the best  
reception.  
3 Close the speaker terminal on the rear of the unit.  
To connect an external AM antenna  
When reception is poor, connect a single vinyl-covered  
wire to the AM EXT terminal and extend it horizontally.  
(The AM loop antenna must remain connected.)  
When connecting speaker cords  
Make sure to connect the cords correctly following  
the right series of above steps.  
During operation, wrong connection or a short  
circuit make the power turned off to protect the  
system.  
The clock loses the setting and is reset to “0:00”.  
Also the MD recording may fail.  
Use only speakers with the same speaker  
impedance as indicated by the speaker terminals  
on the rear of the unit.  
For better reception of both FM and AM  
Make sure the antenna conductors do not touch  
any other terminals and connecting cables.  
Keep the antennas away from metallic parts of  
the units, connecting cables, and the AC power  
cord.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To connect audio equipment with an optical digital  
input terminal  
By using both an optical digital cable (not supplied) and an  
audio cable (not supplied), connect:  
Connecting Other Equipments  
You can connect the following equipments to the system:  
• Audio equipment — used only as an analog playback  
device.  
• Audio equipment with an optical digital input terminal  
— used as a digital recording device.  
• Between the optical digital input terminal on the other  
equipment and the optical digital output terminal on XT-  
UXG66R.  
• Between the audio output jacks on the other equipment  
and the ANALOG IN jacks.  
When you connect and use these equipments, refer also to  
the manuals supplied with them.  
To connect audio equipment without a digital  
output terminal  
(AC wall outlet)  
Connect the audio output jacks on the other equipment and  
theANALOG IN jacks, using an audio cable (not supplied).  
To ANALOG IN  
XT-UXG66R  
Be sure that the plugs of the audio cables and the jacks on  
the rear panel of the unit are color coded: White plugs and  
jacks are for left audio signals, and red ones for right audio  
signals.  
To DIGITAL OUT  
DO NOT connect other equipment while the  
power is on.  
DO NOT plug in any equipment until all  
connections are complete.  
To optical digital input  
To audio output  
(AC wall outlet)  
To ANALOG IN  
XT-UXG66R  
Protective Plug  
Before connecting the other equipment,  
remove the protective plug from the terminal.  
NOW, you can plug in the system and other connected  
equipment FINALLY!  
When connecting the AC power cord into a wall outlet, the  
system switches to standby mode with STANDBY/ON lamp  
lit red.  
To audio output  
on the other equipment  
• By using audio cable (not supplied), connect  
between the audio output jacks on the other  
equipment and the ANALOG IN jacks.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Settings  
REMOTE CONTROL RM-SUXG6R  
DIMMER  
PANEL  
OPEN/CLOSE  
DIMMER  
OPEN/CLOSE  
CLOCK/TIMER  
ACTIVE  
STANDBY/ON  
SLEEP  
CLOCK/TIMER  
BASS EX.  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
BASS  
TREBLE FM MODE  
MULTI JOG  
PLAY MODE REPEAT  
AUTO PRESET  
AUX  
FM/AM  
MULTI JOG  
VOLUME  
MOS - FET  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
SET  
CANCEL  
/CHARA.  
CANCEL  
UP  
Display window  
SET  
<
>
<
>
/
DOWN  
MD  
AUX  
Before operating the system any further, set the clock built  
in this system first, then some other basic settings.  
Setting the Display Illumination (Dimmer)  
You can adjust the brightness of around the display window.  
Each time you press DIMMER button, the display window  
dims and brightens alternately.  
Setting the Clock  
You can set the clock using the remote control whether  
the system is turned on or turned off (i.e. standby mode).  
While the system is turned off:  
Press DIMMER button, “DISPLAY OFF” appears in the  
display window for a while and the system clock  
disappears.  
1 Press CLOCK/TIMER button on the remote control.  
The hour digit in the display window starts blinking.  
<
>
2 Press  
/
button on the remote control to adjust  
Press the button again, “DISPLAY ON” appears in the  
display window for a while and only the system clock  
become dimmed.  
the hour, then press SET button on the remote  
control (rotating MULTI JOG dial also available).  
To correct the hour after pressing SET button, press  
CANCEL button. The hour digit starts blinking again.  
While the system is turned on:  
Press DIMMER button, both operating information and  
indicators in the display window dims. The light around  
MULTI JOG dial also becomes darker than usual.  
Press the button again, all the illumination around the  
display window recovers as usual.  
<
>
3 Press  
/
button on the remote control to adjust  
the minute, then press SET button on the remote  
control (rotating MULTI JOG dial also available).  
Dimmer setting in the standby mode  
Once the system is turned on, the dimmer setting in  
the standby mode does affect neither normal  
operations nor display indications.  
If there is a power failure  
The clock loses the setting and is reset to “0:00.”  
To adjust the clock again  
You need to press CLOCK/TIMER button five  
times until the clock setting mode is selected.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Common Operations  
PANEL  
OPEN/CLOSE  
REMOTE CONTROL RM-SUXG6R  
PANEL  
OPEN/CLOSE  
DIMMER  
(standby/on)  
ACTIVE BASS EX.  
STANDBY/ON  
OPEN/CLOSE  
ACTIVE  
SLEEP  
CLOCK/TIMER  
BASS EX.  
BASS  
BASS  
TREBLE FM MODE  
OPEN/CLOSE  
STANDBY/ON  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
PLAY MODE REPEAT  
AUTO PRESET  
TREBLE  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
BASS  
AUX  
FM/AM  
CANCEL  
/CHARA.  
MULTI JOG  
VOLUME  
MOS - FET  
UP  
SET  
<
>
UP/DOWN  
DOWN  
FM/AM  
AUX  
FM/AM  
BASS indicator  
AUX  
MD  
AUX  
CD  
FM/AM  
VOLUME  
MULTI JOG  
TAPE  
CD 6 (play/pause)  
TAPE ` (playback)  
VOLUME  
VOLUME (+/–)  
Here are basic and common things that apply to all the  
operations of UX-G66R system.  
A little power is always consumed even while the system  
is in standby mode.  
To save the power consumption, make use of Dimmer  
feature (see page 10).  
To switch off the power supply completely, unplug the  
AC power cord from theAC outlet. STANDBY/ON lamp  
goes off.  
Turning On the Power and Selecting the  
Sources  
When you press a play button for example, like FM/AM,  
CD 6 (play/pause), or TAPE 23 (playback), the system  
automatically turns on and STANDBY/ON lamp lights  
green.  
When you unplug the AC power cord  
or if a power failure occurs  
The clock is reset to “0:00” right away, while the  
tuner preset stations will be erased in a few days.  
One Touch Play  
If any CD or a tape, or last tuned station provided, the system  
starts playing that source.  
To select the external equipment as the source, press MD  
6 (play/pause) or AUX button so that the system  
automatically turns on.  
Adjusting the Volume  
You can adjust the volume level only while the system is  
turned on.  
Using  
button  
• Rotate VOLUME dial clockwise to increase the volume  
level or counterclockwise to decrease it.  
To turn on the system without playing,  
press  
green.  
button so that STANDBY/ON lamp lights  
• Using VOLUME dial, rotating quickly makes a large  
change in the volume level while rotating slowly makes a  
step-by-step change.  
To turn off the system (standby mode), press  
again  
red.  
button so that STANDBY/ON lamp lights  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
• When using the remote control, pressVOLUME + button  
to increase the volume level or press VOLUME button  
to decrease it.  
Adjusting Bass and Treble Sounds  
You can adjust bass and treble sound effects with the remote  
control, conforming to your preference and acoustic  
surroundings.  
The volume level (from 0 to 50) appears in the display  
window as follows:  
You can use this effect only while listening sources.  
To adjust the bass  
1 Press BASS button.  
For private listening  
The current level settings shortly appears as follows:  
Connect a pair of headphones to the PHONES jack.  
No sound comes out of the speakers. Be sure to turn  
down the volume level before connecting or putting  
headphones.  
To exit from the level setting, press the button again.  
OPEN/CLOSE  
STANDBY/ON  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
FM/AM  
AUX  
2 Press UP/DOWN button to adjust the level.  
• Press UP button to increase the bass tone level.  
• Press DOWN button to decrease the bass tone level.  
MULTI JOG  
VOLUME  
MOS FET  
-
1
B
I
T
P
E
M
D
D
C
O
N
V
E
R
T
E
R
PHONES  
COMPACT  
DIGITAL AUDIO  
PHONES jack  
The bass level can be adjusted in seven steps from –3  
through 0 to +3 (step “0” makes no effect).  
DOLBY  
B
NR  
REC  
P
AUSE  
AUTO  
REVERSE  
REC  
To cancel the effect, adjust the level to “0.”  
To adjust the treble  
DO NOT turn off the system with the volume level set  
to an extremely high level; otherwise, the sudden blast  
of sound can damage your hearing, speakers and/or  
headphones when you turn on the system or start  
playing any source.  
1 Press TREBLE button.  
The current level settings shortly appears as follows:  
REMEMBER you cannot adjust the volume level while  
the system is turned off.  
To exit from the level setting, press the button again.  
Reinforcing the Bass Sound  
2 Press UP/DOWN button to adjust the level.  
• Press UP button to increase the treble tone level.  
• Press DOWN button to decrease the treble tone level.  
The richness and fullness of the bass sound is maintained  
regardless of how low you set the volume level.  
You can use this effect only while listening sources.  
The treble level can be adjusted in seven steps from –3  
through 0 to +3 (step “0” makes no effect).  
To get the effect, press ACTIVE BASS EX. button on  
the remote control, and its indicator lights in the display  
window.  
To cancel the effect, adjust the level to “0.”  
To cancel the effect, press the button again so that the  
indicator goes off.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Operating the Sliding Panel  
Listening to the External Equipment  
You can use the sliding panel to enable advanced operations You can listen to an external equipment such as MD recorder,  
features provided for UX-G66R micro component system. VCR, and other auxiliaries.  
First make sure that the external equipment is properly  
connected to the system (see page 7 and 9). For operation  
of the equipment, refer to its Instructions.  
Inner Buttons  
1 Press AUX button to select an external source.  
OPEN/CLOSE  
• To play an audio equipment without optical digital  
ST  
ANDBY/ON  
output, select AUX so that the following information  
appears in the display window.  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
FM/AM  
S
Y
S
T
E
M
U
X
-
G
6
6
R
MUL  
TI  
JOG  
OPEN/CLOSE  
MOS - FET  
2 Start playing back the external equipment.  
V
OLUME  
3 Adjust the volume level to the desired listening  
AU  
X
level.  
4 Apply other sound effects, if you wish.  
• Press OPEN/CLOSE button on the front panel (or PANEL  
OPEN/CLOSE button on the remote control).  
The sliding panel opens to uncover the inner buttons  
behind the panel for further operations.  
• Press OPEN/CLOSE button again.  
The sliding panel automatically closes to hide the 10 inner  
buttons.  
Each time you press the button, the sliding panel opens and  
closes repeatedly.  
The buttons behind the sliding panel provided to control  
various program settings such as playback, recording, and  
presetting mode of each source. For details, refer to chapters  
concerning to the particular unit.  
When turning off the system  
After pressing  
button, the system closes sliding  
panel as well as other CD tray and Tape tray  
automatically if they are still opened.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to FM and AM Broadcasts  
Buttons behind the sliding panel  
REMOTE CONTROL RM-SUXG6R  
PANEL  
OPEN/CLOSE  
DIMMER  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
SET  
4
¢
CANCEL  
ENTER  
ACTIVE  
SLEEP  
CLOCK/TIMER  
BASS EX.  
BASS  
TREBLE FM MODE  
FM MODE  
PLAY MODE REPEAT  
AUTO PRESET  
AUTO PRESET  
4
¢
CANCEL  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
SET  
OPEN/CLOSE  
SET  
CANCEL  
/CHARA.  
UP  
CANCEL  
UP/DOWN  
OPEN/CLOSE  
STANDBY/ON  
SET  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
<
>
DOWN  
FM/AM  
MD  
AUX  
CD  
FM/AM  
AUX  
FM/AM  
TAPE  
MULTI JOG  
VOLUME  
MOS - FET  
4 / ¢  
FM/AM  
MULTI JOG  
STEREO/MONO  
indicator  
VOLUME  
You can tune in FM and AM (MW/LW) stations manually,  
automatically, and use the preset station feature.  
Auto Tuning  
Opening the sliding panel, press and hold 4 / ¢  
(lower/higher frequencies) button for a second or more  
to start searching a station and stop automatically until  
the station of sufficient signal strength is tuned in.  
Preset Station Tuning  
Tuning in a Station  
Rotate MULTI JOG dial clockwise to increase the  
preset number or counterclockwise to decrease it  
until the desired station is easily found.  
1 Press FM/AM button.  
The system automatically turns on and tunes in the last  
tuned station (either FM or AM—MW/LW). The  
following information appears in the display window.  
Using the remote control:  
UP/DOWN button on the remote control also has  
the same function as MULTI JOG dial on the front  
panel.  
Preset number  
• Each time you press the button, the band alternates  
between FM and AM.  
• If a program on FM band is broadcast in stereo,  
STEREO indicator lights.  
Preset Station  
You are possibly not allowed to use the feature until  
the station presetting completes.  
In some cases, test frequencies have been already  
memorized for the system since the factory examined  
the preset station features before shipment. This is  
not a malfunction.  
2 Select a station using one of the following three  
methods.  
Manual Tuning  
Opening the sliding panel, press 4 / ¢ (lower/  
higher frequencies) button repeatedly to change the  
frequencies step by step until you find the desired  
station.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To preset stations automatically — Auto Preset  
You can automatically preset 30 FM, 15 AM (MW/LW)  
stations. Preset numbers will be allocated as stations are  
found, starting from the lowest frequency and moving up to  
the higher frequency.  
Presetting Stations  
You can preset up to 30 FM and 15 AM (MW/LW) stations  
into memory by following two methods: manual/automatic  
presettings.  
On the remote control only:  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
1 Press FM/AM button to select a desired band.  
2 Press and hold AUTO PRESET button on the  
remote control for more than two seconds.  
The system automatically starts searching for stations  
with the strong signals continuously, and they are stored  
successively into memory as follows:  
To preset stations manually — Manual Preset  
1 Press 4 / ¢ (lower/higher frequencies) button  
to tune in the desired station manually.  
«
«
«
2 Press SET button.  
“SET” appears in the display window for a while (not  
blinking).  
• Note that “SET” message disappears, presetting  
procedure is cancelled.  
3 Rotate MULTI JOG dial or press repeatedly UP/  
DOWN button to select the preset channel numbered  
from 1 to 30 on FM, or 1 to 15 on AM.  
When you unplug the AC power cord  
or if a power failure occurs  
The preset stations will be erased in a few days.  
If this happens, preset the stations again.  
To change the FM reception mode  
• When an FM stereo broadcast is hard to receive or noisy,  
press FM MODE button on the remote control so that  
MONO indicator lights in the display window. Reception  
improves.  
• Note that the selected channel “02” disappears,  
presetting procedure is cancelled.  
To restore the stereo effect, press FM MODE button  
again so that STEREO indicator lights in the display  
window.  
4 Press SET button again.  
“STORED” appears in the display window for a  
while.  
In this stereo mode, you can hear stereo sounds when a  
program is broadcast in stereo.  
5 The tuned station in step 1 is now stored in the  
preset channel selected in step 3.  
Storing a new station on an used channel  
erases the previously stored one.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Receiving FM Stations with RDS  
BASS  
TREBLE FM MODE  
Buttons behind the sliding panel  
PLAY MODE REPEAT  
AUTO PRESET  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
SET  
4
¢
CANCEL  
ENTER  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
PTY/EON  
DISPLAY/CHARA.  
CANCEL  
/CHARA.  
UP  
SET  
<
>
UP/DOWN  
DISPLAY/CHARA.  
DOWN  
FM/AM  
SET  
MD  
AUX  
CD  
FM/AM  
OPEN/CLOSE  
STANDBY/ON  
TAPE  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
AUX  
FM/AM  
MULTI JOG  
VOLUME  
MOS - FET  
VOLUME  
FM/AM  
RDS mode indicators  
· RDS, EON, and TA/NEWS/INFO  
indicators  
MULTI JOG  
RDS allows FM stations to send an additional signal along  
with their regular program signals. For example, the stations  
send their station names, as well as information about what  
type of program they broadcast such as sports and music.  
Changing the RDS Information  
You can see RDS information in the display window while  
listening to an FM station.  
• RDS operations are possible only using the remote control  
except DISPLAY/CHARA. button.  
When tuned in an FM station which provides the RDS  
service, RDS indicator lights in the display window. You  
can receive the following types of RDS signals.  
Press DISPLAY/CHARA. button repeatedly while  
listening to an FM station.  
Each time you press the button, the display window  
changes to show the following information:  
PS (Program Service):  
Shows commonly known station names.  
PS  
PTY  
RT  
(Radio Text)  
PTY (Program Type):  
(Program Service) (Program Type)  
Shows types of broadcast programs.  
(Preset channel number)  
RT (Radio Text):  
Shows text messages the station sends.  
If no PS, PTY, or RT signals are sent by a station  
“NO PS,” “NO PTY,” or “NO RT” appears in the  
display window.  
If the unit takes time to show RDS information  
received from a station  
EON (Enhanced Other Networks):  
Provides the information about the types of the  
programs sent by other RDS stations than the  
one being received.  
“PS,” “PTY,” or “RT” may appear in the display  
window.  
More about RDS  
Not all the FM stations provide RDS signals, nor  
do all RDS stations provide the same services. If  
in doubt, check with local radio stations for  
details on RDS in your area.  
RDS may not work correctly if the received  
station is not transmitting the signals properly or  
if the signal strength is weak.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Searching for Programs by PTY Codes  
(PTY Search)  
Switching to a Program Type Temporarily  
The EON function allows the system to switch temporarily  
to a broadcast program of your choice (News, TA, and/or  
Info) from a different station except when you are listening  
to a non-RDS stations — some FM stations and AM (MW/  
LW) stations.  
• EON indicator lights while receiving a station with the  
EON code.  
• EON function is applicable only to preset stations.  
One of the RDS advantages is that you can locate a particular  
kind of program by specifying the PTY codes.  
• The PTY Search is applicable only to preset stations.  
• There is a time limit in doing the following steps. If the  
setting is canceled before you finish, start from step 1  
again.  
To search a program, use the remote control.  
To activate the EON function, use the remote control.  
1 Press PTY/EON button on the remote control while  
listening to an FM station.  
1 Press PTY/EON button.  
The last EON data type selected and “SELECT EON”  
appears and starts blinking in the display window.  
“SELECT PTY” appears and starts blinking in the  
display window.  
2 Press UP/DOWN button repeatedly to select the EON  
data type you want.  
2 Press UP/DOWN button repeatedly to select a PTY  
code while “SELECT PTY” is blinking.  
Each time you press the button, the EON data types  
change as follows:  
Each time you press the button, the PTY codes change  
as follows (refer also to the list on page 19):  
(Blank indications) = TA = News = Info = TA  
News = News Info = TA Info = TA News Info =  
(back to the beginning)  
News Affairs Info Sport Educate “  
Drama Culture Science Varied Pop  
M Rock M Easy M Light M Classics  
Other M Weather Finance Children  
Social Religion Phone In Travel “  
Leisure Jazz Country Nation M “  
Oldies Folk M Document Test Alarm!  
(back to the beginning)  
TA:  
News:  
Traffic announcement  
News  
Info: Program the purpose of which is to impart  
advice in the widest sense.  
3 Press SET button to enter the EON data types.  
RDS system switches to EON standby mode to receive  
a desired data type.  
3 Press SET button to enter the PTY code.  
While searching, “SEARCH” appears in the display  
window.  
When the program is over, the indicator of received PTY  
code stops blinking and remains lit, but the EON function  
still remains activated.  
The unit searches 30 preset FM stations, and stops when  
it finds the one you have selected, and tunes in that  
station.  
To cancel the EON function:  
Press PTY/EON button again so that TA/News/Info  
indicator goes off.  
• To continue searching after the first stop:  
Press SET button again while the indications in the  
display window are blinking.  
If no program is found, “NOT FOUND” appears and  
the unit returns to the last received station.  
• To stop searching during the process:  
Press PTY/EON button while searching.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
More about the EON function  
How the EON function actually works:  
CASE 1  
EON data sent from some stations may not be compatible with  
this unit.  
If there is no station broadcasting the program you  
have selected  
While listening to a program tuned in by the EON function,  
the station does not change even if another network station  
starts broadcasting a program of the same EON data.  
While listening to a program tuned in by the EON function,  
you can only use PTY/EON and DISPLAY/CHARA. buttons  
as the tuner operation buttons.  
If the stations alternate intermittently between the station  
tuned by the EON function and the currently tuned station  
(“WAITING” flashes in the display window), press PTY/EON  
button to cancel the EON function.  
The unit continues tuning in the current station.  
«
When a station starts broadcasting the program you  
have selected, the unit automatically switches to the  
station. The indicator of received PTY code starts  
flashing.  
If you do not press the button, the currently tuned station is  
received finally, and the indication of the EON data type  
flashing in the display window disappears.  
«
When the program is over, “EON END” appears in the  
display window, and the unit goes back to the  
previously tuned station, but the EON function still  
remains activated.  
CASE 2  
If there is a station broadcasting the program you  
have selected  
The unit tunes in the program. The indicator of  
received PTY code starts flashing.  
«
When the program is over, “EON END” appears in the  
display window, and the unit goes back to the  
previously tuned station, but the EON function still  
remains activated.  
CASE 3  
If the FM station you are listening to is  
broadcasting the program you have selected  
The unit continues to receive the station but the  
indicator of received PTY code starts flashing.  
«
When the program is over, the indicator of received  
PTY code stops flashing and remains lit, but the EON  
function still remains activated.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Description of the PTY codes:  
News:  
News.  
Finance:  
Stock market reports, commerce, trading  
etc.  
Affairs:  
Topical program expanding or enlarging  
upon the news — debate or analysis.  
Children:  
Programs targeted at a young audience.  
Info:  
Program the purpose of which is to impart Social:  
advice in the widest sense.  
Programs about sociology, history,  
geography, psychology and society.  
Sport:  
Program concerned with any aspect of Religion:  
Religious programs.  
sports.  
Phone In:  
Involving members of the public expressing  
their views either by phone or at a public  
forum.  
Educate:  
Drama:  
Culture:  
Educational programs.  
All radio plays and serials.  
Travel:  
Travel information.  
Programs concerning any aspect of national  
or regional culture, including language, Leisure:  
Programs about recreational activities.  
Jazz music.  
theater.  
Jazz:  
Science:  
Varied:  
Programs about natural sciences and  
technology.  
Country:  
Songs which originate from, or continue the  
musical tradition of theAmerican Southern  
States.  
Used for mainly speech-based programs like  
quizzes, panel games and personality  
interviews.  
Nation M:  
Oldies:  
Current popular music of the nation or  
region in that country’s language.  
Pop M:  
Commercial music of current popular  
appeal.  
Music from the so-called “golden age” of  
popular music.  
Rock M:  
Easy M:  
Rock music.  
Folk M:  
Document:  
Test:  
Music which has its roots in the musical  
culture of a particular nation.  
Current contemporary music considered to  
be “easy-listening.”  
Program concerning factual matters,  
presented in an investigative style.  
Light M:  
Classics:  
Other M:  
Weather:  
Instrumental music, and vocal or choral  
works.  
Broadcast when testing emergency  
broadcast equipment or receivers.  
Performances of major orchestral works,  
symphonies, chamber music, etc.  
Alarm!:  
Emergency announcement.  
Music not fitting into any of the other  
categories.  
Classification of the PTY codes for some FM  
stations may be different from the above list.  
Weather reports and forecasts.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back a CD  
Buttons behind the sliding panel  
BASS  
TREBLE FM MODE  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
SET  
CANCEL  
ENTER  
4
¢
PLAY MODE  
REPEAT  
PLAY MODE REPEAT  
AUTO PRESET  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
SET  
CANCEL  
/CHARA.  
UP  
CANCEL  
4
¢
CANCEL  
SET  
PLAY MODE  
SET  
<
>
UP/DOWN  
0 (open/close)  
DOWN  
FM/AM  
STANDBY/ON  
MD  
AUX  
CD  
<
>
/
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
E
R
T
E
R
TAPE  
CD 6 (play/pause)  
4 / ¢  
FM/AM  
MULTI JOG  
MOS - FET  
7 (stop)  
VOLUME  
7 (stop)  
6 (play/pause)  
Playback mode  
indicators  
MULTI JOG  
You can use Normal, Program, Random, or Repeat Play.  
• When using the buttons behind the sliding panel, press  
OPEN/CLOSE button on the AX-UXG66 to open the  
sliding panel first.  
• When using the remote control, press CD 6 (play/  
pause) button first and 7 (stop) button successively.  
DO NOT try to open or close the CD tray by  
hands as it will be damaged.  
DO NOT place any foreign matters.  
DO NOT prevent the tray from opening and  
closing, because it may results damages on the  
unit.  
Playing Back the Entire Disc — Normal Play  
3 Press 0 (open/close) button again.  
The disc tray closes while the information appears  
one after another as follows.  
1 Press 0 (open/close) button on CD unit.  
The system automatically turns on and the disc tray  
comes out.  
«
«
Total track number  
Total playback time  
2 Place a disc correctly on the circle of the disc tray,  
with its label side up.  
• When closing the tray without a CD placed, “CD NO  
DISC” appears.  
When pressing 6 (play/pause) button directly,  
the system starts playback a CD immediately.  
Good  
No Good  
• When using a CD single (8 cm), place it on the  
inner circle of the disc tray.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
4 Press 6 (play/pause) button on the CD unit.  
Each track of the CD starts playing one after another,  
and stops when the final track has finished playing.  
To go to another track  
Before or during playback, press 4 / ¢ button  
repeatedly:  
Press ¢ button:  
Skips to the beginning of the next and succeeding  
tracks.  
Press 4 button:  
Goes back to the beginning of the current and  
previous tracks.  
To stop playing back for a moment, press 6  
(play/pause) button on the CD unit.  
The playback time starts blinking in the display  
window.  
Rotating MULTI JOG dial clockwise also changes the tracks  
forwards quickly, while rotating it counterclockwise the  
tracks reverse quickly.  
To resume playback, press 6 (play/pause)  
button again.  
Playback continues from the point where it was  
stopped for a while.  
< / > button on the remote control is also available  
to skipping operations.  
Programing the Playing Order of the Tracks  
— Program Play  
5 Press 7 (stop) button to stop playing back the CD.  
Following information for the CD appears in the display  
window.  
You can arrange the order in which the tracks play before  
you start playback. You can program up to 32 tracks.  
Total track number  
Total playback time  
1 Place a CD.  
• If the current playing source is not the CD, press  
6 (play/pause) button on the CD unit, then 7  
(stop) button before going to the next step.  
6 Press 0 (open/close) button on the CD unit to  
remove the CD.  
• Pressing 0 (open/close) button during playback  
directly, the CD unit stops playback and opens CD  
tray.  
2 Press PLAY MODE button repeatedly until “CD  
PROGRAM” appears in the display window.  
Searching and Skipping Tracks  
• Each time you press the button, playback mode  
indicators also change as follows:  
While playing back a CD, you can do the following  
operations.  
PROGRAM  
RANDOM  
To search and skip to a particular point in a track  
During playback, press and hold 4 / ¢ button to meet  
the desired passages in a track:  
Canceled  
(Normal play)  
3 Rotate MULTI JOG dial to select a track number to  
Press and hold ¢ button:  
Fast forwards in the track.  
Press and hold 4 button:  
Fast reverses in the track.  
be programed (< / > buttons also available).  
UP/DOWN button on the remote control is also  
available to searching operations.  
Track number  
Program number  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
To erase all the programed data  
4 Press SET button to program the track number.  
After playing back the CD, you can erase all the programed  
track data by pressing 7 (stop) button. New program can be  
entered again.  
To exit from the Program play mode  
Before or during playback, you can exit from Program play  
mode as follows:  
Track number  
Program number  
Here the track number 2 on the CD is stored into a  
program number 1, and shortly after that the total  
playback time of programed tracks appears in the display  
window as follows:  
• Before playback, press PLAY MODE button twice.  
• During playback, press 7 (stop) button then PLAY MODE  
button twice.  
Playback mode indicator goes off and the system resumes  
Normal play mode.  
Pressing 0 (open/close) button to open the CD tray  
also quits and erases the program play.  
Total playback time  
5 Repeat steps 3 to 4 to program other tracks you  
want up to 32 tracks.  
If you try to program a 33rd step  
“MEMORY FULL” will appear in the display  
window, and your entry is ignored.  
The total playback time of programed tracks  
exceeds 99’59”  
“– – : – –” will appear in the display window.  
6 Press 6 (play/pause) button on the CD unit.  
The programed tracks are played back in the order you  
have set.  
• Other CD operations are the same as Normal play.  
7 Press 7 (stop) button to quit the program play.  
• When Program play finished, CD unit automatically  
stops.  
To check the program contents  
Before playing back the CD, you can check the program  
contents by using 4 / ¢ button.  
Press ¢ button:  
Shows the programed tracks in the programed  
order.  
Press 4 button:  
Shows them in the reverse order.  
To modify the program  
Before playing back the CD, you can erase the last  
programed track by pressing CANCEL button. Each time  
you press the button, the last programed track is erased from  
the end of program.  
To add new tracks to the program before you start  
playing-back, simply select a track number again you  
want to add (repeat steps 3 to 4).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
Playing at Random — Random Play  
Repeating Tracks — Repeat Play  
The tracks of the loaded CD will play in no special order  
(at random) when you select this mode.  
You can have the entire disc, the programed tracks, or the  
individual track repeat as many times as you like.  
1 Place a CD.  
1 Place a CD.  
If the current playing source is not the CD, press 6  
(play/pause) button on the CD unit, then 7 (stop) button  
before going to the next step.  
If the current playing source is not the CD, press 6  
(play/pause) button on the CD unit, then 7 (stop) button  
before going to the next step.  
2 Press PLAY MODE button repeatedly until “CD  
2 Press REPEAT button on the remote control  
repeatedly to set the repeat mode.  
RANDOM” appears in the display window.  
• Each time you press the button, repeat mode indicators  
light in the display window, and Repeat playback  
mode changes as follows:  
• Each time you press the button, playback mode  
indicator also changes as follows:  
Canceled  
(Normal play)  
PROGRAM  
RANDOM  
Canceled  
(Normal play)  
: Repeats one track on the CD or in a  
program.  
3 Press 6 (play/pause) button on the CD unit.  
:
Repeats all the tracks on the CD or a  
program.  
The track numbers are shuffled in the display window  
for a few seconds, and start playing back at random.  
Random play ends when all the tracks are played back  
once.  
3 Press 7 (stop) button to quit Repeat play.  
To exit from Repeat play mode  
Pressing REPEAT button repeatedly until repeat mode  
• Other CD operations are the same as Normal play.  
indicators ( and  
) goes off in the display window.  
Combining play modes:  
4 Press 7 (stop) button to quit Random play.  
When combining Program play and Repeat play,  
you can repeat whole the programed tracks or  
one track among them (  
When combining Random play and Repeat play,  
you can just repeat whole the shuffled tracks  
To exit from Random play mode  
Before playing back the CD, you can exit from Random  
play mode as follows:  
and  
).  
(only  
).  
• Before playback, press PLAY MODE button once.  
• During playback, press 7 (stop) button then press  
PLAY MODE button once.  
Play mode indicator goes off and the system resumes the  
normal play mode.  
Pressing 0 (open/close) button to open the CD  
tray also quits and erases the random play.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Back a Tape  
DISPLAY  
CANCEL  
/CHARA.  
Buttons behind the sliding panel  
UP  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
SET  
SET  
4
¢
CANCEL  
ENTER  
<
>
DOWN  
FM/AM  
TAPE ` (playback)  
MD  
AUX  
CD  
TAPE  
4
¢
7 (stop)  
π (auto reverse)  
0 (open/close)  
4 / ¢  
VOLUME  
DOLBY  
B
NR  
REC PAUSE  
AUTO  
REVERSE  
REC  
` (playback)  
7 (stop)  
DOLBY B NR  
Tape operation indicators  
You can listen to Normal (Type I), High position (Type II),  
and Metal (Type IV) type tapes without further settings.  
• When using the inner buttons, press OPEN/CLOSE button  
on AX-UXG66 unit to open the sliding panel first.  
• When using the remote control, press TAPE 23  
(playback) button first and 7 (stop) button successively.  
DO NOT try to open or close the tape tray by  
hands as it will be damaged.  
DO NOT place any foreign matters.  
DO NOT prevent the tray from opening and  
closing, because it may results damages on the  
unit.  
DO NOT use tapes longer than 120 minutes.  
The characteristic deterioration may occur and these  
tapes easily jam in the tape transport mechanism.  
3 Press 0 (open/close) button again to close the tray.  
4 Press ` (playback) button on the unit or TAPE  
` (playback) button on the remote control.  
The tape playback starts and the tape direction indicator  
blinks slowly in orange to show the tape running  
direction.  
Playing Back a Tape — Basic Operation  
1 Press 0 (open/close) button on the cassette deck  
REC  
Tape direction indicator  
unit.  
The system automatically turns on and the tape tray  
comes out.  
• Each time you press ` (playback) on the cassette  
deck unit orTAPE ` (playback) button on the remote  
control, you can change the tape sides to be played  
back currently.  
3 : plays the forward side.  
2 : plays the reverse side.  
Playback comes to an end (Auto Reverse)  
The cassette deck unit automatically changes the tape  
direction to the reverse side, and continue playback  
both sides. Each time to press the button, Auto  
Reverse feature is set to on/off alternately.  
2 Place a tape on the tray with the side you want to  
listen to facing up (forward side).  
Tape fits in the caved-in area so that an exposed edge  
of the tape faces toward the inside of the unit.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
5 Press 7 (stop) button to stop playback the tape.  
To skip forward to the next music  
Press the button same as the tape direction indicator as  
follows:  
6 Press 0 (open/close) button directly to stop and  
remove the tape.  
3 ] Press ¢ button.  
2 ] Press 4 button.  
While the system is turned off (standby mode)  
Pressing ` (playback) or TAPE ` (playback)  
button automatically switches the system turned on  
and starts playback if a tape is already loaded.  
During Music Scan progressed, the tape direction  
indicator starts blinking rhythmically.  
REC  
REC  
or  
reverse  
forward  
Fast-Winding a Tape  
Repeating Music Scan feature made easy  
searching a desired program on a tape one after  
another.  
While stopping the tape, press 4 / ¢ button to fast-  
wind the tape.  
The beginning of the desired program may not be  
located properly  
If blanks between music are too short, the blanks  
contain too much noise or the program itself  
contains very low-level or silent part.  
To fast-forward, if the current tape direction is:  
3 ] Press ¢ button.  
2 ] Press 4 button.  
To fast-rewind, if the current tape direction is:  
3 ] Press 4 button.  
Playing Back Dolby-Recorded Tape  
2 ] Press ¢ button.  
You can play back the tape recorded with Dolby B NR  
system. The Dolby NR system allows to reduce hiss noise  
in playback.  
During fast-winding, the tape direction indicator starts  
blinking quickly.  
Press DOLBY B NR button on the cassette deck before  
playback. Each time you press the button, the Dolby NR  
lamp on the unit lights up orange or turns off.  
REC  
REC  
or  
reverse  
forward  
When the tape comes to an end  
The deck unit automatically stops.  
A tape recorded using Dolby NR  
Should be played back using the Dolby NR of the  
same type as that used in recording. The audio quality  
will be affected if a different type is used in playback.  
Searching and Skipping to Each Program  
— Music Scan  
Dolby noise reduction manufactured under license from  
Dolby Laboratories Licensing Corporation.  
While playing the tape, you can search and skip to the  
beginning of the current and next program on a tape.  
“DOLBY” and the double-D symbol  
Dolby Laboratories Licensing Corporation.  
are trademarks of  
Music scan searches for blank portions that usually  
separate programs recorded onto the tape, then  
automatically plays the program beginning after  
that blank portion.  
To skip backward to the current music  
Press the button opposite to the tape direction indicator  
as follows:  
3 ] Press 4 button.  
2 ] Press ¢ button.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording onto a Tape  
Buttons behind the sliding panel  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
CANCEL  
/CHARA.  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
4
¢
SET  
CANCEL  
ENTER  
UP  
SET  
<
>
DOWN  
FM/AM  
AUX  
MD  
AUX  
CD  
SET  
REC MODE  
TAPE ` (playback)  
TAPE  
CD  
6
(play/pause)  
π (auto reverse)  
0 (open/close)  
7
(stop)  
FM/AM  
DOLBY  
B
NR  
VOLUME  
REC PAUSE  
AUTO  
REVERSE  
REC  
REC PAUSE  
` (playback)  
7 (stop)  
DOLBY B NR  
Tape operations indicators  
Two types of cassette tapes can be recorded onto, including  
normal (Type I), and High position (Type II) tapes. These  
types are identified automatically by the cassette deck unit  
and the recording level is also corrected automatically.  
Neither volume level nor sound effects during playback does  
affect to the recording.  
Make sure to select a source first, otherwise you  
cannot use recording function.  
2 Place a recordable tape with the side you want to  
record facing up.  
Press 0 (open/close) button on the cassette deck unit to  
open the tape tray; place a tape on it; and press 0 (open/  
close) button again to close it.  
IMPORTANT:  
• It should be noted that it may be unlawful to pre-  
recorded tapes, records, or discs without the consent  
of the owner of copy right in the sound or video  
recording, broadcast or cable program and in any  
literary, dramatic, or artistic embodied therein.  
Manual Recording onto a Tape  
You cannot record onto the tape without a protect tab.  
When using that tape, cover the hole for desired side  
with adhesive tape.  
1 Select one of the recording sources — FM/AM  
broadcasts, CD, or other external equipment.  
• To record FM/AM broadcasts, receive a station with  
Tuner unit.  
\
• To record a CD or its tracks programed, set the play-  
pause mode for CD unit.  
• To record from an external equipment connected to  
ANALOG IN jacks, prepare it as required.  
3 Press REC PAUSE button on the cassette deck unit.  
REC  
REC indicator  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
REC indicator lights red to show the recording pause  
mode, and “TAPE REC” appears in the display window  
as follows,  
Dolby B NR  
Press DOLBY B NR button before recording to  
reduce frequency response noise.  
When the tape is played back later, also press the  
button with its lamp lit.  
BEAT CUT on AM (MW/LW)  
When recording AM broadcast, beats noise may  
be heard.  
or  
Set the BEAT CUT selector to either position 1 or  
2 on the rear panel of the cassette deck unit to  
reduce the noise.  
To change the recording source  
You cannot change the selected source during the  
recording pause mode. To exit from the recording  
pause mode, press 7 (stop) button on the cassette deck  
unit.  
Recording in Auto Reverse  
1 Select one of the recording sources — FM/AM  
To make the blank tape  
broadcasts, CD, or other external equipments.  
Press AUX button to start recording without  
connecting nor playing back the external equipment.  
2 Make sure the tape side for recording meets the  
tape direction indicator 3 (forward).  
REC  
4 Press Tape ` (playback) button for FM/AM  
broadcasts or 6 (play/pause) button on the CD unit  
to start recording.  
forward  
reverse  
Tape direction indicator starts blinking slowly in the  
display window.  
• Each time to press ` (playback) button or TAPE `  
(playback) button on the remote control, you can  
change the tape direction to be recorded onto.  
3 : Good, records onto the forward side.  
REC  
Tape direction indicator  
2 : No good, records onto the reverse side.  
To stop recording for a moment, press REC PAUSE  
button on the cassette deck unit. Tape direction  
indicator stops blinking in the display window.  
To resume recording, press ` (playback) button  
again. Recording continues from the point where it  
was stopped for a while.  
The recording in the auto reverse mode stops  
automatically after completing recording onto the  
2 (reverse) direction side.  
Be sure to start recording from the 3 (forward)  
direction side.  
When the auto reverse mode is set to off, recording  
stops after having recorded onto one side of the  
tape.  
5 Press 7 (stop) button on the cassette deck unit for  
FM/AM broadcasts recording, or 7 (stop) button on  
the CD unit for the CD recording.  
3 Press (auto reverse) button on the cassette deck  
unit to set the reverse mode on.  
Recording stops and REC indicator goes off in the  
display window.  
The auto reverse lamp lights orange on the front panel.  
On CD recording, cassette deck unit will stop  
after leaving a non-recorded portion of 4 seconds.  
If you want to quit recording immediately, press  
7 (stop) button on the cassette deck unit.  
4 Press REC PAUSE button on the cassette deck unit.  
5 Repeat the steps 4 to 5 of “Manual Recording onto  
a Tape” mentioned in the left column.  
6 Press 0 (open/close) button on the cassette deck  
unit to remove the tape.  
• Pressing 0 (open/close) button directly during  
recording , the cassette deck unit stops recording and  
opens the tape tray.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
When CD playback finished, the CD unit first, then  
the cassette deck stops recording automatically.  
Synchronized Recording from a CD  
CD application on UX-G66R system can be recorded  
with a simple, one-touch operation.  
Cassette deck unit will stop after leaving a non-  
recorded portion of 4 seconds.  
If you want to quit recording immediately, press  
7 (stop) button on the cassette deck unit.  
1 Place a recordable tape and a source CD into each  
tray.  
• To record using Dolby B NR, press the DOLBY B  
NR button before recording so that its lamp near the  
button lights orange.  
5 Press 0 (open/close) button on each unit to remove  
the CD and the tape.  
2 Press 6 (play/pause) button on the CD unit, then  
7 (stop) button to set the system to CD operation  
mode.  
Recording from the External Equipment  
You can record audio sources played-back on the external  
equipment onto a tape manually.  
First of all, make sure to connect the external equipment  
properly (see also page 9).  
3 Press REC MODE button behind the sliding panel.  
The display window shows information as follows:  
Recording an external audio source manually  
1 Press AUX button to show “AUX” in the display  
window.  
4 Press SET button.  
The external audio source is selected.  
Display window shows as follows:  
2 Repeat the steps 2 and 3 on page 26 to prepare a  
tape to record.  
Information appears as follows:  
then  
3 Press ` (playback) button on the cassette deck unit  
or TAPE ` (playback) button on the remote control  
to start recording.  
UX-G66R starts playback on the CD unit as well as  
recording on the cassette deck unit simultaneously.  
You can get an entire copy of the source CD.  
Tape direction indicator starts blinking slowly in the  
display window.  
To select a particular track or program, use REC  
PAUSE button on the cassette deck unit. During SYNC  
REC mode, you cannot operate CD unit except 7 (stop)  
button.  
REC  
Tape direction indicator  
To make recording pause temporarily, press REC  
PAUSE button on the cassette deck unit.  
To resume recording, press ` (playback) button  
on the cassette deck unit.  
4 Start playing back the external equipment.  
To stop recording for a moment, press REC PAUSE  
button on the cassette deck unit. Tape direction  
indicator stops blinking in the display window.  
To resume recording, press ` (playback) button  
again.  
Using Program play for CD recording  
To edit CD’s tracks to be recorded, it is useful to set  
the desired tracks to be played back into a program  
in advance.  
To end the recording, press 7 (stop) button on the  
cassette deck unit.  
Recording stops and REC indicator goes off in the  
display window.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Timers  
Buttons behind the sliding panel  
REMOTE CONTROL RM-SUXG6R  
PANEL  
DISPLAY  
/CHARA.  
PLAY  
MODE  
REC  
MODE  
TITLE  
/EDIT  
CLOCK  
/TIMER  
SET  
4
¢
CANCEL  
ENTER  
OPEN/CLOSE  
DIMMER  
(standby/on)  
SLEEP  
ACTIVE  
SLEEP  
CLOCK/TIMER  
BASS EX.  
CLOCK/TIMER  
BASS  
TREBLE FM MODE  
SET  
CANCEL  
CLOCK/TIMER  
OPEN/CLOSE  
PLAY MODE REPEAT  
AUTO PRESET  
STANDBY/ON  
PTY/EON TITTLE/EDIT ENTER  
DISPLAY  
OPEN/CLOSE  
STANDBY/ON  
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
6
R
CANCEL  
/CHARA.  
CANCEL  
SET  
UP  
SET  
<
>
REC  
AUX  
FM/AM  
MULTI JOG  
VOLUME  
MOS - FET  
<
>
/
DOWN  
FM/AM  
MD  
AUX  
CD  
TAPE  
Timer indicators  
MULTI JOG  
• Each time you press the button, the timer mode  
changes as follows:  
On UX-G66R system, three timer features are available —  
Recording Timer, Daily Timer, and Sleep Timer.  
Before using these timers, you need to set the clock built in  
the system (see page 10).  
DAILY TIMER  
(canceled)  
DAILY TIMER  
ON  
0:00  
REC TIMER  
REC TIMER  
Clock  
ON  
0:00  
Using Recording Timer  
< >  
2 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the hour of the timer-  
on time, then press SET button.  
With Recording Timer, you can make a tape of a radio  
broadcast automatically.  
You can set Recording Timer whether the system is turned  
on or off.  
• To correct a mis-entry any time during the setting process,  
press CANCEL button.  
< >  
3 Rotate MULTI JOG dial ( / button on the remote  
How Recording Timer actually works  
The system automatically turns on, tunes into the specified  
station, turns off the volume, and starts recording when the  
timer-on time comes.  
control also available) to select the minute of the  
timer-on time, then press SET button.  
Then, when the timer-off time comes, the system  
automatically turns off (standby).  
The timer settings remain stored in memory until you reset  
them or unplug the AC power cord.  
< >  
4 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the hour of the timer-  
off time, then press SET button.  
1 Press CLOCK/TIMER button repeatedly until  
“REC TIMER” and its timer-on time appear in the  
display window.  
You can select the timer-on/off time, a tuner preset  
channel to record, and recording media.  
• If MD recorder XM-G6 (not supplied) connected, you  
can select MD as recording media (see page 7).  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
< >  
5 Rotate MULTI JOG dial ( / button on the remote 2 Press SET button to call the previous settings for  
control also available) to select the minute of the  
timer-off time, then press SET button.  
next timer recording.  
The REC timer indicator lights, and the setting items  
appear one after another in the display window.  
• To erase the recording timer, press CANCEL button  
in this step.  
< >  
6 Rotate MULTI JOG dial ( / button on the remote  
Using Daily Timer  
control also available) to select either “TUNER FM”  
or “TUNER AM,” then press SET button.  
With Daily Timer, you can wake up on your favorite music  
or radio program.  
You can set the daily timer whether the system is turned  
on or off.  
< >  
7 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select a preset channel, then  
press SET button.  
How Daily Timer actually works  
The system automatically turns on, and starts playing the  
specified source when the timer-on time comes. Then, when  
the timer-off time comes, the system automatically turns  
off (standby).  
The timer settings remain stored in memory until you reset  
them or disconnect the AC power cord.  
TAPE REC” follows in the display window as selected  
recording media, unless any MD recorder connected.  
• If XM-G6 MD recorder connected, you can select  
either a tape or an MD as recording media.  
1 Press CLOCK/TIMER button repeatedly until  
“DAILY TIMER” and its timer-on time appear.  
• Each time you press the button, the timer mode  
changes as follows:  
8 Press SET button to select recording media, and turn  
off the system.  
DAILY TIMER  
After completing the settings...  
(canceled)  
DAILY TIMER  
ON  
0:00  
The REC timer indicator lights and the setting items appear one  
after another in the display window. Thus the Recording Timer is  
ready for unattended recording.  
REC TIMER  
REC TIMER  
Clock  
ON  
0:00  
< >  
2 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the hour of the timer-  
on time, then press SET button.  
REC  
REC timer indicator  
After a timer recording is complete...  
Set the volume to an appropriate listening level.  
If you press a certain button while Recording  
Timer is operating  
Recording will stop.  
< >  
3 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the minute of the  
timer-on time, then press SET button.  
To use the same Recording Timer settings  
repeatedly  
Once you have set the recording timer, it remains stored  
in memory until you change it.  
To activate the recording timer with the previous settings,  
follow the procedure below:  
< >  
4 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the hour of the timer-  
off time, then press SET button.  
1 Press CLOCK/TIMER button repeatedly until  
“REC TIMER” appears in the display window.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued  
< >  
5 Rotate MULTI JOG dial ( / button on the remote 8 Rotate MULTI JOG dial (UP/DOWN button on the  
control also available) to select the minute of the  
timer-off time, then press SET button.  
remote control also available) to adjust the volume  
level, then press SET button.  
You can adjust the volume within the range of “0” to  
“50.” If you select “– –,” the volume is set to the  
previous level when the unit is turned off.  
< >  
6 Rotate MULTI JOG dial ( / button on the remote  
control also available) to select the source, then press  
SET button.  
After completing the settings...  
The daily timer indicator lights, and the setting items appear one  
after another in the display window.  
Turns off the unit (standby) if you have set the daily timer with  
the unit turned on.  
TUNER  
FM  
TUNER  
AM  
(
)
MD  
CD  
(
AUX  
TAPE  
AUX  
)
DIGITAL  
REC  
DAILY timer indicator  
TUNER FM: Tunes into a preset FM station. Go to  
step 7.  
If you press a certain button while Daily Timer is  
operating  
The unit will not turn off automatically.  
TUNER AM: Tunes into a preset AM station. Go to  
step 7.  
CD:  
Plays a CD. Prepare a CD, then go to  
step 7.  
(MD):  
TAPE:  
AUX*:  
Plays a MD, only when XM-G6 MD  
recorder connected. Then go to step 7.  
Plays a tape. Prepare a tape, then go to  
step 8.  
Selects “AUX” as the source. Make the  
external equipment ready for playback.  
To use the same Daily Timer settings repeatedly  
Once you have set Daily Timer, it remains stored in memory  
until you change it.  
To activate the daily timer with the previous settings, follow  
the procedure below:  
(AUX DIGITAL):  
Selects an external digital audio  
1 Press CLOCK/TIMER button repeatedly until  
“DAILY TIMER” appears in the display window.  
equipment as the source if connected.  
* To use the external equipment with the Daily Timer,  
it also has the timer function.  
2 Press SET button to activate Daily timer.  
The daily timer indicator lights, and the setting items  
appear one after another in the display window.  
• To deactivate the daily timer, press CANCEL button  
in this step.  
7 If you have selected FM/AM as the source in the  
above step, select a preset channel.  
< >  
1) Rotate MULTI JOG dial ( / button on the remote  
control also available) to select a preset channel.  
2) Press SET button.  
If you have selected CD as the source in the above  
step, select a track.  
< >  
1) Rotate MULTI JOG dial ( / button on the remote  
control also available) to select a track.  
2) Press SET button.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Sleep Timer  
Timer Priority  
With Sleep Timer, you can fall asleep to your favorite music  
or radio program.  
Since each timer can be set separately, you may wonder  
what happens if the setting for these timers overlaps.  
Here are the priorities for each timer.  
How Sleep Timer actually works  
The system automatically turns off after the selected time  
length passes while playing any source.  
• Recording Timer has priority over Daily Timer and  
Sleep Timer.  
If Daily Timer is set to come on while Recording Timer  
is operating, Daily Timer will not come on at all.  
On the remote control only:  
6:00  
6:30  
7:00  
7:30  
1 Press SLEEP button on the remote control  
repeatedly to select the sleep timer.  
• Each time you press the button, the time length  
changes as follows:  
Recording Timer  
Daily Timer  
10  
20  
30  
60  
90  
120  
Does not work.  
(Canceled)  
If Recording Timer is set to come on while Sleep Timer  
is operating, Sleep Timer will be canceled several seconds  
before Recording Timer comes on.  
2 Wait for about 5 seconds after selecting the time  
length.  
6:00  
7:30  
6:30  
7:00  
When the sleep timer setting is completed, the display  
window dims and just shows the remaining time until  
the shut-off time minute by minute like “SLEEP 30”  
then “SLEEP 29”.  
Recording Timer  
Sleep Timer  
Canceled.  
To change the shut-off time, press SLEEP button  
repeatedly until the desired time length appears.  
• Sleep Timer has priority over Daily Timer.  
If Daily Timer is set to come on while Sleep Timer is  
operating, Daily Timer will not come on at all.  
To cancel the setting, press SLEEP button repeatedly  
until the sleep timer indication disappears.  
6:00  
7:30  
6:30  
7:00  
Sleep Timer  
Daily Timer  
Does not work.  
Therefore, the equation is like this (high > low):  
Recording Timer > Sleep Timer > Daily Timer  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and Additional Information  
General Notes  
In general, you will have the best performance by keeping  
your CDs, cassette tapes and the mechanism clean.  
• Store CDs and cassette tapes in their cases, and keep  
them in cabinets or on shelves.  
• Keep the CD disc tray, and the cassette tapes tray  
closed when not in use.  
Handling CDs  
• Only CDs bearing this mark can be  
used with this system. However,  
continued use of irregular shape  
CDs (e.g. heart shape, octagonal)  
can damage the system.  
• Remove the CD from its case by  
holding it at the edge while  
pressing the center hole lightly.  
• Do not touch the shiny surface of  
the disc, or bend the CD.  
• Put the CD back in its case after  
use to prevent warping.  
• Be careful not to scratch the  
surface of the CD when placing it  
back in its case.  
• Avoid exposure to direct sunlight,  
temperature extremes, and  
moisture.  
• To clean the CD  
Wipe the CD with a soft cloth in a  
straight line from center to edge.  
DO NOT use any solvent — such as conventional  
record cleaner, spray, thinner, or benzine — to  
clean the CD.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Handling Cassette Tapes  
Types of Cassette Tapes  
This cassette deck unit incorporates an Automatic Tape  
Detection function. This mechanism uses the tape-type  
detection holes to distinguishes which type of tape was  
inserted, and sets the bias and equalizer to the optimum  
settings for that tape automatically.  
Cautions regarding handling  
• Do not touch the surface of the tape or pull the tape out of  
the cassette.  
• Tape spooled loosely around the hubs is likely to jam in  
the pinch rollers and capstans. Before loading the tape  
into the cassette tray, take up the slack in the tape as shown  
below.  
The following types of tapes may be used with this cassette  
deck unit.  
Normal tape  
TYPE I  
BIAS: NORMAL  
EQ:  
120µs  
Tape storage  
• Place tapes in their cases for storage.  
• Avoid storing tapes on top of TVs or speakers, in sunlight  
or places of high temperature, or in humid or dusty areas.  
Normal (No detection slots) Tab  
(to prevent accidental erasure)  
To prevent accidental erasure  
High position (CrO2) tape  
TYPE II  
• Cassette tapes have tabs to prevent accidental erasure.  
• If you remove the tabs after making a recording, the  
cassette deck cannot be set to record when that tape is  
loaded. Remove the tabs so that valuable  
recordings will not be accidentally erased.  
BIAS: HIGH  
EQ:  
70µs  
Recording (erasure) is not possible when the tabs are  
removed.  
High position  
detection slots  
Metal tape (only for playback)  
TYPE IV  
BIAS: METAL  
EQ:  
70µs  
For front side (A)  
For reverse side (B)  
• To make another recording on a tape whose tabs have  
been removed, cover the tab holes with adhesive tape.  
Metal detection slots  
Tape-type detection slot  
Adhesive tape  
Certain early period Metal and High position  
(CrO2) tapes may not have tape-type detection  
slots. The cassette deck unit cannot obtain the  
correct characteristics for these tapes.  
Ferrochromite (FeCr) TYPE III tapes cannot be  
used with this cassette deck unit.  
DO NOT cover the tape-type detection slots.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are having a problem with your system, check this list for a possible solution before calling for service.  
If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified  
person, such as your dealer, for service.  
Symptom  
No sound is heard.  
Possible Cause  
Action  
Connections are incorrect, or  
loose.  
Headphones are connected.  
Check all connections and make  
corrections (see pages 6 – 9).  
Disconnect the headphones (see  
page 12).  
Adjust the volume again (see  
page 11).  
Volume level is set to “– –”.  
Poor radio reception.  
The antenna is not connected  
correctly.  
Reconnect the antenna securely.  
The AM loop antenna is too close  
to the units.  
Change the position and direction  
of the AM loop antenna.  
The FM antenna is not properly  
extended and positioned.  
Extend FM antenna to the best  
reception position (see page 7).  
The AM radio noise interferes  
with tape recording.  
Set the BEAT CUT selector again  
(see page 27).  
Unable to record onto a tape.  
The CD skips.  
You are using a tape without a  
protect tab.  
Tape-type detection slots are  
covered by foreign matters.  
Cover the hole with adhesive tape  
(see page 34).  
Remove the foreign matters.  
The CD is dirty or scratched.  
Clean or replace the CD (see page  
33).  
Unable to operate using the remote  
control.  
The path between the remote  
control and the remote sensor on  
the front panel is blocked.  
Remove the obstruction.  
The batteries have lost their  
charge.  
Replace the batteries (see page 6).  
Plug in the AC power plug.  
Loaded CD and tape cannot be  
ejected.  
The main AC power cord is not  
plugged in.  
The system is under the recording  
operations.  
Stop the recording if required (see  
pages 27).  
The CD does not play.  
Operations are disabled.  
The CD is upside down.  
Put in the CD with the label side  
up.  
The built-in microprocessor has  
malfunctioned due to external  
electrical interference.  
Unplug the system then plug it  
back in.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Stereo Amplifier  
AX-UXG66  
Speaker System  
Type:  
Speaker unit:  
SP-UXG66  
Output power:  
2-way Bass-Reflex Type  
9
48 W (24 W + 24 W) at 6 (Max.)  
Woofer  
Cone x 1  
Tweeter  
11.5 cm (4 /16 in.)  
42 W (21 W + 21 W) at 6 (10% THD)  
3
Load impedance:  
6 (6 to 16 allowance)  
3.0 cm (1 /16 in.)  
Balanced Dome x 1  
Power handling capacity: 24 W  
Impedance:  
Frequency range:  
Sound Pressure Level:  
Dimensions (approx.):  
Audio output level/Impedance (at 1 kHz):  
Sub Woofer 800 mV/440 Ω  
6 Ω  
Power requirement:  
Power consumption:  
AC 230 V , 50 Hz  
63 W (at operation)  
2.0 W (on standby: with  
Dimmer)  
40 Hz – 20 000 Hz  
85.5 dB/W•m  
157 mm x 295 mm x 232 mm  
(W/H/D)  
(6 3/16 in. x 11 5/8 in. x 9 3/16 in.)  
3.3 kg (7.3 lbs) each  
Dimensions (approx.):  
182 mm x 81 mm x 313 mm  
(W/H/D)  
(7 3/16 in. x 3 1/4 in. x 12 3/8 in.)  
3.8 kg (8.4 lbs)  
Mass (approx.):  
Mass (approx.):  
Supplied Accessories  
See page 6.  
Compact Disc/Tuner  
XT-UXG66R  
Audio input sensitivity/Impedance (at 1 kHz):  
Design and specifications are subject to change without  
notice.  
AUX: 400 mV/47 kΩ  
[CD section]  
US and foreign patents licensed from Dolby  
Laboratories Licensing Corporation.  
Digital output:  
OPTICAL DIGITAL OUT  
Immeasurable  
Wow and flutter:  
[Tuner section]  
FM tuning range:  
AM tuning range:  
87.50 MHz – 108.00 MHz  
MW: 522 kHz – 1 629 kHz  
LW: 144 kHz – 288 kHz  
181 mm x 81 mm x 313 mm  
(W/H/D)  
(7 3/16 in. x 3 1/4 in. x 12 3/8 in.)  
1.9 kg (4.2 lbs)  
Dimensions (approx.):  
Mass (approx.):  
Cassette Deck  
Frequency response :  
Normal  
TD-UXG66  
30 Hz – 15 000 Hz  
30 Hz – 16 000 Hz  
High position  
Wow and flutter:  
0.1 % WRMS  
Dimensions (approx.):  
181 mm x 81 mm x 304 mm  
(W/H/D)  
(73/16 in. x 3 1/4 in. x 12 in.)  
1.9 kg (4.2 lbs)  
Mass (approx.):  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”  
This equipment has been disigned and manufactured to meet international safety standards but, like any electrical  
equipment, care must be taken if you are to obtain the best results and safety is to be assured.  
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮  
Do read the operating instructions before you attempt to use the equipment.  
Do ensure that all electrical connections (including the mains plug, extension leads and interconnections between  
pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and  
withdraw the mains plug when making or changing connections.  
Do consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.  
Do be careful with glass panels or doors on equipment.  
✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮✮  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or if it is damaged in any  
way–switch off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it is designed for  
unattended operation or has a standby mode.  
Switch off using the switch on the equipment and make sure that your family know how to do this.  
Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the requirements of traffic  
safety. It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume as such use can permanently damage your hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete safety always fit the  
manufacturer’s approved stand or legs with the fixings provided according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
— NEVER let anyone, especially children, push anything into holes, slots or any other opening in the case -  
this could result in a fatal electrical shock.;  
— NEVER guess or take chances with electrical equipment of any kind -it is better to be safe than sorry!  
VICTOR COMPANY OF JAPAN, LIMITED  
J
C
V
EN  
0201JTMMDWJSC  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Water Pump PM20X X X B02 User Manual
JAMO Speaker D 4 User Manual
JAMO Stereo Receiver S 404 MS 10 User Manual
Jonsered Lawn Mower LM2146 CD User Manual
JVC Stereo System CA D451TR User Manual
JVC Stove HR DD750U User Manual
Karcher Pressure Washer K 349 M User Manual
King Canada Staple Gun 8260FSN User Manual
Kirkland Signature Clothes Dryer 3406079 User Manual
Kompernass Hot Beverage Maker KH 1023 User Manual