MICRO COMPONENT SYSTEM
UX-G6R
Consists of AX-UXG6, XT-UXG6R, TD-UXG6,
and SP-UXG6.
STEREO AMPLIFIER
AX-UXG6
COMPACT DISC/ TUNER
XT-UXG6R
CASSETTE DECK
TD-UXG6
SPEAKER SYSTEM
SP-UXG6
OPEN/CLOSE
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
FM/AM
AUX
MULTI JOG
VOLUME
MOS
-
FET
REMOTE CONTROL RM-SUXG6E
PANEL
OPEN/CLOSE DIMMER
1
B
I
T
P
•
E
•
M
D
•
D
•
C
O
N
V
E
R
T
E
R
ACTIVE
BASS EX. CLOCK/TIMER SLEEP
BASS
TREBLE FM MODE
PHONES
COMPACT
PLAY MODE REPEAT
AUTO PRESET
DIGITAL AUDIO
PTY/EON TITTLE/EDIT ENTER
DISPLAY
/CHARA.
CANCEL
UP
SET
<
>
DOWN
MD
AUX
CD
TAPE
FM/AM
DOLBY
B
NR
4
7
¢
+
VOLUME
–
REC PAUSE
AUTO
REVERSE
REC
INSTRUCTIONS
For Customer Use:
Enter below the Model No. and Serial
No. which are located either on the rear,
bottom or side of the cabinet. Retain this
information for future reference.
Model No.
Serial No.
LVT0376-001B
[B]
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT FOR LASER PRODUCTS
REPRODUCTION OF LABELS
2
WARNING LABEL, PLACED INSIDE THE UNIT
1
CLASSIFICATION LABEL, PLACED ON EXTERIOR
SURFACE
DANGER: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
VARNING: Osynlig laser-
strålning när denna del är
öppnad och spärren är
urkopplad.
strålen.
Betrakta
ej
(s)
TO BEAM.
(e)
CLASS
LASER
1
ADVARSEL: Usynlig laser-
stråling ved åbning, når
sikkerhedsafbrydere er ude
af funktion. Undgå udsæt-
VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet
PRODUCT
alttiina
lasersäteilylle. Älä katso
säteeseen. (f)
näkymättömälle
telse for stråling
(d)
1. CLASS 1 LASER PRODUCT
2. DANGER: Invisible laser radiation when open and
interlock failed or defeated. Avoid direct exposure to beam.
3. CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to
qualified service personnel.
– G-2 –
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
We would like to thank you for purchasing one of our JVC products.
Before operating this micro component system, read this manual carefully
and thoroughly to obtain the best possible performance from your system,
and retain this manual for future reference.
Power sources
• When unplugging from the wall outlet, always pull the
About This Manual
plug, not the AC power cord.
This manual is organized as follows:
DO NOT handle the AC power cord with wet
hands.
• The manual mainly explains operations using the buttons
and controls on the units. You can also use the buttons
on the remote control if they have the same or similar
names (or marks) as those on the units.
Moisture condensation
If operation using the remote control is different from
that using each unit, it is then explained.
Moisture may condense on the lens inside the units in the
following cases:
• Basic and common information that is the same for many
functions is grouped in one place, and is not repeated in
each procedure. For instance, we do not repeat the
information about turning on/off the system, setting the
volume, changing the sound effects, and others, which
are explained in the section “Basic Settings” and
“Common Operations” on pages 10 to 13.
• After starting heating in the room
• In a damp room
• If the units are brought directly from a cold to a warm
place
Should this occur, the system may malfunction. In this case,
leave the units turned on for a few hours until the moisture
evaporates, unplug the AC power cord, and then plug it in
again.
• The following marks are used in this manual:
Gives you warnings and cautions to
prevent from a damage or risk of fire/
electric shock.
Also gives you information which is not
good for obtaining the best possible
performance from the units.
Others
• Should any metallic object or liquid fall into a unit, unplug
the units and consult your dealer before operating any
further.
• If you are not going to operate the units for an extended
period of time, unplug the AC power cord from the wall
outlet.
Gives you information and hints you had
better know.
DO NOT disassemble the units since there are
no user serviceable parts inside.
If anything goes wrong, unplug the AC power cord and
consult your dealer.
Precautions
Installation
• Install in a place which is level, dry and neither too hot
nor too cold — between 5˚C (41˚F) and 35˚C (95˚F).
• Install the units in a location with adequate ventilation to
prevent internal heat buildup in the units.
• Leave sufficient distance between the units and the TV.
• Keep the speakers away from the TV to avoid interference
with TV.
DO NOT install the units in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust or vibration.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introduction .......................................................... 1 Playing Back a Tape ........................................... 24
About This Manual ............................................................... 1
Precautions ........................................................................... 1
Playing Back a Tape — Basic Operation ........................... 24
Fast-Winding a Tape ........................................................... 25
Searching and Skipping to Each Program
Contents ................................................................. 2
— Music Scan ................................................................ 25
Playing Back Dolby-Recorded Tape .................................. 25
Location of the Buttons and Controls ................. 3
Recording onto a Tape........................................ 26
Front Panels .......................................................................... 4
Remote Control .................................................................... 5
Manual Recording onto a Tape........................................... 26
Recording in Auto Reverse ................................................ 27
Synchronized Recording from a CD .................................. 28
Recording from the external equipment ............................. 28
Getting Started...................................................... 6
Unpacking ............................................................................ 6
Putting the Batteries into the Remote Control ..................... 6
Connecting the System Control Cables and the External
Wire .................................................................................. 6
Connecting MD Recorder XM-G6 ....................................... 7
Connecting Sub Woofer System ........................................... 7
Connecting Antennas ............................................................ 7
Connecting Speakers ............................................................ 8
Connecting Other Equipments ............................................. 9
Using the Timers ................................................. 29
Using Recording Timer ...................................................... 29
Using Daily Timer .............................................................. 30
Using Sleep Timer .............................................................. 32
Timer Priority ..................................................................... 32
Maintenance and Additional Information........ 33
Handling CDs ..................................................................... 33
Handling Cassette Tapes .................................................... 34
Types of Cassette Tapes...................................................... 34
Basic Settings ...................................................... 10
Setting the Clock ................................................................ 10
Setting the Display Illumination (Dimmer) ....................... 10
Troubleshooting .................................................. 35
Specifications....................................................... 36
Common Operations .......................................... 11
Turning On the Power and Selecting the Sources .............. 11
Adjusting the Volume ......................................................... 11
Reinforcing the Bass Sound ............................................... 12
Adjusting Bass and Treble Sounds ..................................... 12
Operating the Sliding Panel................................................ 13
Listening to the External Equipment .................................. 13
Listening to FM and AM Broadcasts ................ 14
Tuning in a Station ............................................................. 14
Presetting Stations .............................................................. 15
Receiving FM Stations with RDS ...................... 16
Changing the RDS Information.......................................... 16
Searching for Programs by PTY Codes (PTY Search)....... 17
Switching to a Program Type Temporarily......................... 17
Playing Back a CD .............................................. 20
Playing Back the Entire Disc — Normal Play ................... 20
Searching and Skipping Tracks .......................................... 21
Programing the Playing Order of the Tracks
— Program Play ............................................................. 21
Playing at Random — Random Play.................................. 23
Repeating Tracks — Repeat Play ....................................... 23
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of the Buttons and Controls
Become familiar with the buttons and controls on the units.
Front Panels
OPEN/CLOSE
STANDBY/ON
AX-UXG6
Stereo Amplifier
1
2
3
4
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
5
6
AUX
FM/AM
MULTI JOG
VOLUME
MOS - FET
7
XT-UXG6R
Compact Disc
/Tuner
8
q
w
e
1
B
I
T
P • E • M D • D • C
O
N
V
E
R
T
E
R
9
p
PHONES
COMPACT
DIGITAL AUDIO
TD-UXG6
Cassette Deck
i
r
t
y
DOLBY
B
NR
o
;
a
REC PAUSE
AUTO
REVERSE
REC
u
Display window
REC
BASS
2
5
1
3
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Front Panels
Buttons behind the sliding panel
AX-UXG6
Stereo Amplifier
1 2 3 4 5 6 7 8 9 p
1
button and STANDBY/ON lamp (11)*
2 MULTI JOG dial
3 FM/AM button (14)*
4 OPEN/CLOSE button (13)*
5 Display window
6 VOLUME dial (11)
7 AUX button (13, 28)*
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
4
SET
¢
CANCEL
ENTER
ST
ANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
FM/AM
XT-UXG6R Compact Disc/Tuner
8 CD tray
S
Y
S
T
E
M
U
X
-
G
6
R
MUL
TI
JOG
9 Remote sensor (5)
OPEN/CLOSE
MOS - FET
p PHONES jack (12)
q 0 (open/close) button for CD tray (20)*
w 6 (play/pause) button (21)*
e 7 (stop) button (21)
VOLUME
AUX
TD-UXG6
Cassette Deck
1 DISPLAY/CHARA. button (16)
2 4 button (14, 21, 22, 25)
3 ¢ button (14, 21, 22, 25)
4 SET button (22, 29)
5 CANCEL button (10, 22, 29)
6 ENTER button **
7 PLAY MODE button (21)
8 REC MODE button (28)
9 TITLE/EDIT button **
p CLOCK/TIMER button (10, 29)
r ∏ (auto-reverse) button and lamp (24, 27)
t DOLBY B NR button and lamp (25, 27)
y REC PAUSE button (26)
u Tape operations indicators (24, 26)
• Tape direction (2 / 3) and REC indicators
i 0 (open/close) button for Tape tray (24)*
o ` (playback) button (24)*
; 7 (stop) button (25)
a Tape tray
** Used only with MiniDisc recorder XM-G6
(not supplied).
To press the buttons suffixed with * mark also
turns on the system.
•
•
DO NOT operate any button and control until
the system setup is completed.
DO NOT operate the sliding panel by hands,
otherwise it will cause serious damages on the
sliding mechanism (see page 13).
Display window
1 Timer mode indicators
•
REC (recording timer) and
timer) indicators
DAILY (daily
2 CD playback mode indicators
• PROGRAM, RANDOM,
(repeat 1),
and
(repeat all) mode indicators
3 FM mode indicators
• STEREO and MONO indicators
4 BASS indicator
5 RDS mode indicators
• RDS, EON, and TA/NEWS/INFO indicators
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Become familiar with the buttons on the remote control.
Remote Control
Remote Control
1 PANEL OPEN/CLOSE button (13)
2 CLOCK/TIMER button (10, 29)
3 ACTIVE BASS EX. (extension) button (12)
4 TREBLE button (12)
5 BASS button (12)
6 REPEAT button (23)
7 PLAY MODE button (21)
8 TITLE/EDIT button *
9 PTY/EON button (17)
p UP button (12, 14, 21)
q DISPLAY/CHARA. button (16)
w SET button (22, 29)
REMOTE CONTROL RM-SUXG6R
PANEL
;
a
OPEN/CLOSE
DIMMER
1
3
5
7
9
ACTIVE
2
4
6
8
p
SLEEP
CLOCK/TIMER
BASS EX.
s
d
f
g
BASS
TREBLE FM MODE
PLAY MODE REPEAT
AUTO PRESET
PTY/EON TITTLE/EDIT ENTER
DISPLAY
e < (left cursor) button (10, 21, 29)
r DOWN button (12, 14, 21)
t MD 6 (play/pause) button *
y FM/AM button (14)
CANCEL
/CHARA.
UP
q
e
t
h
j
k
w
r
SET
<
>
u TAPE ` (playback) button (24)
DOWN
FM/AM
i 7 (stop) button (21, 25)
MD
AUX
CD
o 4 button (14, 21, 22, 25)
; DIMMER button (10)
y
i
TAPE
l
/
u
o
a
(standby/on) button (11)
s SLEEP button (32)
d FM MODE button (15)
f AUTO PRESET button (15)
g ENTER button *
VOLUME
z
h CANCEL button (10, 22, 29)
j > (right cursor) button (10, 21, 29)
k AUX button (13, 28)
l CD 6 (play/pause) button (21)
/ ¢ button (14, 21, 22, 25)
z VOLUME +/– button (11)
OPEN/CLOSE
* Used only with MiniDisc recorder XM-G6 (not
supplied).
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
FM/AM
AUX
MULTI JOG
VOLUME
MOS FET
-
1
B
I
T
P
•
E
•
M
D
•
D
•
C
O
N
V
E
R
T
E
R
Remote
Sensor
To operate the system correctly using the remote
control
Before using these buttons:
PH
COMPACT
DIGITAL AUDIO
For Tuner operations, press FM/AM button on the
remote control first.
DOLBY
B
NR
REC PAUSE
AUTO
REVERSE
REC
For CD operations, press CD 6 (play/pause)
button on the remote control first.
For Tape operations, press TAPE 23 (playback)
button on the remote control first.
REMOTE CONTROL RM-SUXG6R
PANEL
OPEN/CLOSE DIMMER
ACTIVE
BASS EX. CLOCK/TIMER SLEEP
BASS
TREBLE FM MODE
PLAY MODE REPEAT
AUTO PRESET
PTY/EON TITTLE/EDIT ENTER
DISPLAY
When using the remote control, point it at
the remote sensor on the front panel.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Unpacking
Connecting the System Control Cables and
the External Wire
After unpacking, check to be sure that you have all the
following items.
The number in the parentheses indicates the quantity of the
pieces supplied.
UX-G6R micro component system consists of three units,
AX-UXG6 Stereo Amplifier, XT-UXG6R Compact Disc/
Tuner, TD-UXG6 Cassette Deck, and SP-UXG6 Speaker
System.
• AM loop antenna (1)
• FM antenna (1)
• Remote control (1)
• Batteries (2)
• Speaker cords (2)
• External wire (1)
You can easily connect these units using the system control
cables equipped on the rear panel of the units.
• To prevent malfunction, connect the external wire as
illustrated.
If any is missing, consult your dealer immediately.
AX-UXG6
FROM CONNECTOR-A
External wire
Putting the Batteries into the Remote
Control
(supplied)
XT-UXG6R
1
2
3
Insert the batteries — R6P (SUM-3)/AA (15F) — into the
remote control, by matching the polarity (+ and –) on the
batteries with the + and – markings on the battery
compartment.
TO CONNECTOR-A
FROM CONNECTOR-B
TD-UXG6
TO CONNECTOR-B
When the remote control can no longer operate the units,
replace both batteries at the same time.
DO NOT change vertical stacking order of the
units as illustrated to avoid heat buildup.
1
R6P(SUM-3)/AA(15F)
• To connect the cables, press the middle of the connector
body until it clicks into the connector on the rear panel.
• To disconnect, if needed, pull the connector out pushing
both sides of the connector body. Never pull out the cables
themselves.
2
3
To connect
To disconnect
•
DO NOT use an old battery together with a new
one.
•
•
•
DO NOT use different types of batteries together.
DO NOT expose batteries to heat or flame.
DO NOT leave the batteries in the battery
compartment when you are not going to use the
remote control for an extended period of time.
Otherwise, it will be damaged from battery
leakage.
When connecting the system control cables to
the connectors
Make sure to connect the cable to the connector
having the same name such as “FROM
CONNECTOR-A” and “TO CONNECTOR-A.”
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Connecting MD Recorder XM-G6
Connecting Antennas
You can also connect the MD recorder XM-G6 (not
supplied), specifically designed for UX-G6R. This unit will
complete UX-G6R micro component system.
When you connect and use this unit, refer to the Instructions
supplied with it for details.
Supplied FM antenna
ANTENNA
AM
LOOP
External wire
FM 7
COAX
(supplied with XM-G6)
AX-UXG6
External wire
(supplied with UX-G6R)
XT-UXG6R
FROM CONNECTOR-C
1 Attach the FM antenna to the FM 75 Ω COAXIAL
terminal on the rear panel of XT-UXG6R.
2 Extend the FM antenna.
XM-G6
TO CONNECTOR-C
3 Fasten it up in the position which gives you the
best reception.
Optical digital cable
(supplied with XM-G6)
About the supplied FM antenna
The FM antenna supplied with this unit can only be
used as temporary measure. If reception is poor,
you can connect an outdoor FM antenna.
•
•
DO NOT install XM-G6 until you turn off the
system and unplug the AC power code, otherwise
installation should fail to damage the system.
DO NOT change the vertical stacking order of XM-
G6 as illustrated to avoid heat buildup.
To connect an outdoor FM antenna
Before connecting it, disconnect the supplied FM antenna.
Outdoor FM antenna
(not supplied)
Connecting Sub Woofer System
When using JVC external sub woofer system, connect
audio cable between AX-UXG6’s SUB WOOFER OUT
jack and the input of your sub woofer system.
ANTENNA
AM
SUBWOOFER OUT
LOOP
FM 75
COAX
AX-UXG6
AX-UXG6
Sub Woofer System
A 75Ω antenna with coaxial type connector
(DIN 45325) should be used.
(not supplied)
Audio cable
(not supplied)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
AM antenna
Connecting Speakers
You can connect the speakers using the speaker cords.
1
2, 3
Vinyl-covered wire
(not supplied)
ANTENNA
Red
AM
LOOP
Speaker Cord
Speaker Cord
AM
EXT
FM 75
COAXIAL
SPEAKERS
RIGHT LEFT
Black
AM loop antenna (supplied)
Right speaker
Left speaker
1 Connect the AM loop antenna to the AM LOOP
1 Open the speaker terminal.
terminals as illustrated.
2 Insert the end of the speaker cord to the terminal.
Match the polarity of the speaker terminals: Red (+)
to red (+) and black (–) to black (–).
2 Turn the AM loop antenna until you have the best
reception.
3 Close the speaker terminal on the rear of the unit.
To connect an external AM antenna
When reception is poor, connect a single vinyl-covered
wire to the AM EXT terminal and extend it horizontally.
(The AM loop antenna must remain connected.)
When connecting speaker cords
•
Make sure to connect the cords correctly following
the right series of above steps.
During operation, wrong connection or a short
circuit make the power turned off to protect the
system.
The clock loses the setting and is reset to “0:00”.
Also the MD recording may fail.
Use only speakers with the same speaker
impedance as indicated by the speaker terminals
on the rear of the unit.
For better reception of both FM and AM
•
Make sure the antenna conductors do not touch
any other terminals and connecting cables.
Keep the antennas away from metallic parts of
the units, connecting cables, and the AC power
cord.
•
•
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To connect audio equipment with an optical digital
input terminal
By using both an optical digital cable (not supplied) and an
Connecting Other Equipments
You can connect the following equipments to the system:
audio cable (not supplied), connect:
• Audio equipment — used only as an analog playback
device.
• Audio equipment with an optical digital input terminal
— used as a digital recording device.
• Between the optical digital input terminal on the other
equipment and the optical digital output terminal on XT-
UXG6R.
• Between the audio output jacks on the other equipment
and the ANALOG IN jacks.
When you connect and use these equipments, refer also to
the manuals supplied with them.
To connect audio equipment without a digital
output terminal
Connect the audio output jacks on the other equipment and
(AC wall outlet)
theANALOG IN jacks, using an audio cable (not supplied).
To ANALOG IN
XT-UXG6R
Be sure that the plugs of the audio cables and the jacks on
the rear panel of the unit are color coded: White plugs and
jacks are for left audio signals, and red ones for right audio
signals.
To DIGITAL OUT
•
•
DO NOT connect other equipment while the
power is on.
DO NOT plug in any equipment until all
connections are complete.
To optical digital input
To audio output
(AC wall outlet)
To ANALOG IN
XT-UXG6R
Protective Plug
Before connecting the other equipment,
remove the protective plug from the terminal.
NOW, you can plug in the system and other connected
equipment FINALLY!
When connecting the AC power cord into a wall outlet, the
system switches to standby mode with STANDBY/ON lamp
lit red.
To audio output
on the other equipment
• By using audio cable (not supplied), connect
between the audio output jacks on the other
equipment and the ANALOG IN jacks.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Settings
REMOTE CONTROL RM-SUXG6R
DIMMER
CLOCK/TIMER
PANEL
OPEN/CLOSE
DIMMER
OPEN/CLOSE
ACTIVE
STANDBY/ON
SLEEP
CLOCK/TIMER
BASS EX.
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
BASS
TREBLE FM MODE
MULTI JOG
PLAY MODE REPEAT
AUTO PRESET
AUX
FM/AM
MULTI JOG
VOLUME
MOS - FET
PTY/EON TITTLE/EDIT ENTER
DISPLAY
SET
CANCEL
/CHARA.
CANCEL
UP
Display window
SET
<
>
<
>
/
DOWN
MD
AUX
Before operating the system any further, set the clock built
in this system first, then some other basic settings.
Setting the Display Illumination (Dimmer)
You can adjust the brightness of around the display window.
Each time you press DIMMER button, the display window
dims and brightens alternately.
Setting the Clock
You can set the clock using the remote control whether
the system is turned on or turned off (i.e. standby mode).
• While the system is turned off:
Press DIMMER button, “DISPLAY OFF” appears in the
display window for a while and the system clock
disappears.
1 Press CLOCK/TIMER button on the remote control.
The hour digit in the display window starts blinking.
<
>
2 Press
/
button on the remote control to adjust
Press the button again, “DISPLAY ON” appears in the
display window for a while and only the system clock
become dimmed.
the hour, then press SET button on the remote
control (rotating MULTI JOG dial also available).
• To correct the hour after pressing SET button, press
CANCELbutton. The hour digit starts blinking again.
• While the system is turned on:
Press DIMMER button, both operating information and
indicators in the display window dims. The light around
MULTI JOG dial also becomes darker than usual.
Press the button again, all the illumination around the
display window recovers as usual.
<
>
3 Press
/
button on the remote control to adjust
the minute, then press SET button on the remote
control (rotating MULTI JOG dial also available).
Dimmer setting in the standby mode
Once the system is turned on, the dimmer setting in
the standby mode does affect neither normal
operations nor display indications.
If there is a power failure
The clock loses the setting and is reset to “0:00.”
To adjust the clock again
You need to press CLOCK/TIMER button five
times until the clock setting mode is selected.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Common Operations
PANEL
OPEN/CLOSE
REMOTE CONTROL RM-SUXG6R
PANEL
OPEN/CLOSE
DIMMER
(standby/on)
ACTIVE BASS EX.
STANDBY/ON
OPEN/CLOSE
ACTIVE
SLEEP
CLOCK/TIMER
BASS EX.
BASS
BASS
TREBLE FM MODE
OPEN/CLOSE
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
PLAY MODE REPEAT
AUTO PRESET
TREBLE
PTY/EON TITTLE/EDIT ENTER
DISPLAY
BASS
AUX
FM/AM
CANCEL
MULTI JOG
VOLUME
/CHARA.
MOS - FET
UP
SET
<
>
UP/DOWN
DOWN
FM/AM
AUX
FM/AM
BASS indicator
AUX
MD
AUX
CD
FM/AM
VOLUME
MULTI JOG
TAPE
CD 6 (play/pause)
TAPE ` (playback)
VOLUME
VOLUME (+/–)
Here are basic and common things that apply to all the
operations of UX-G6R system.
A little power is always consumed even while the system
is in standby mode.
• To save the power consumption, make use of Dimmer
feature (see page 10).
• To switch off the power supply completely, unplug the
AC power cord from theAC outlet. STANDBY/ON lamp
goes off.
Turning On the Power and Selecting the
Sources
When you press a play button for example, like FM/AM,
CD 6 (play/pause), or TAPE 23 (playback), the system
automatically turns on and STANDBY/ON lamp lights
green.
When you unplug the AC power cord
or if a power failure occurs
The clock is reset to “0:00” right away, while the
tuner preset stations will be erased in a few days.
One Touch Play
If any CD or a tape, or last tuned station provided, the system
starts playing that source.
Adjusting the Volume
To select the external equipment as the source, press MD
6 (play/pause) or AUX button so that the system
automatically turns on.
You can adjust the volume level only while the system is
turned on.
Using
button
• Rotate VOLUME dial clockwise to increase the volume
level or counterclockwise to decrease it.
• To turn on the system without playing,
press
green.
button so that STANDBY/ON lamp lights
• Using VOLUME dial, rotating quickly makes a large
change in the volume level while rotating slowly makes
a step-by-step change.
• To turn off the system (standby mode), press
again
red.
button so that STANDBY/ON lamp lights
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
• When using the remote control, press VOLUME + button
to increase the volume level or press VOLUME – button
to decrease it.
Adjusting Bass and Treble Sounds
You can adjust bass and treble sound effects with the remote
control, conforming to your preference and acoustic
surroundings.
The volume level (from 0 to 50) appears in the display
window as follows:
You can use this effect only while listening sources.
To adjust the bass
1 Press BASS button.
For private listening
The current level settings shortly appears as follows:
Connect a pair of headphones to the PHONES jack.
No sound comes out of the speakers. Be sure to turn
down the volume level before connecting or putting
headphones.
To exit from the level setting, press the button again.
OPEN/CLOSE
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
FM/AM
AUX
MULTI JOG
VOLUME
MOS
-
FET
2 Press UP/DOWN button to adjust the level.
• Press UP button to increase the bass tone level.
• Press DOWN button to decrease the bass tone level.
1
B
I
T
P
•
E
•
M
D
•
D
•
C
O
N
V
E
R
T
E
R
PHONES
COMPACT
DIGITAL AUDIO
PHONES jack
The bass level can be adjusted in seven steps from –3
through 0 to +3 (step “0” makes no effect).
DOLBY
B
NR
REC PAUSE
AUTO
REVERSE
REC
To cancel the effect, adjust the level to “0.”
To adjust the treble
DO NOT turn off the system with the volume level set
to an extremely high level; otherwise, the sudden blast
of sound can damage your hearing, speakers and/or
headphones when you turn on the system or start
playing any source.
1 Press TREBLE button.
The current level settings shortly appears as follows:
REMEMBER you cannot adjust the volume level while
the system is turned off.
To exit from the level setting, press the button again.
Reinforcing the Bass Sound
2 Press UP/DOWN button to adjust the level.
• Press UP button to increase the treble tone level.
• Press DOWN button to decrease the treble tone level.
The richness and fullness of the bass sound is maintained
regardless of how low you set the volume level.
You can use this effect only while listening sources.
The treble level can be adjusted in seven steps from –3
through 0 to +3 (step “0” makes no effect).
• To get the effect, press ACTIVE BASS EX. button on
the remote control, and its indicator lights in the display
window.
To cancel the effect, adjust the level to “0.”
• To cancel the effect, press the button again so that the
indicator goes off.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Operating the Sliding Panel
Listening to the External Equipment
You can use the sliding panel to enable advanced operations You can listen to an external equipment such as MD recorder,
features provided for UX-G6R micro component system.
VCR, and other auxiliaries.
First make sure that the external equipment is properly
connected to the system (see page 7 and 9). For operation
of the equipment, refer to its Instructions.
Inner Buttons
OPEN/CLOSE
1 Press AUX button to select an external source.
• To play an audio equipment without optical digital
output, select AUX so that the following information
appears in the display window.
ST
ANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
FM/AM
S
Y
S
T
E
M
U
X
-
G
6
R
MUL
TI
JOG
OPEN/CLOSE
MOS - FET
2 Start playing back the external equipment.
VOLUME
3 Adjust the volume level to the desired listening
AUX
level.
4 Apply other sound effects, if you wish.
• Press OPEN/CLOSE button on the front panel (or PANEL
OPEN/CLOSE button on the remote control).
The sliding panel opens to uncover the inner buttons
behind the panel for further operations.
• Press OPEN/CLOSE button again.
The sliding panel automatically closes to hide the 10 inner
buttons.
Each time you press the button, the sliding panel opens and
closes repeatedly.
The buttons behind the sliding panel provided to control
various program settings such as playback, recording, and
presetting mode of each source. For details, refer to chapters
concerning to the particular unit.
When turning off the system
After pressing
button, the system closes sliding
panel as well as other CD tray and Tape tray
automatically if they are still opened.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to FM and AM Broadcasts
Buttons behind the sliding panel
REMOTE CONTROL RM-SUXG6R
PANEL
OPEN/CLOSE
DIMMER
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
SET
4
¢
CANCEL
ENTER
ACTIVE
SLEEP
CLOCK/TIMER
BASS EX.
BASS
TREBLE FM MODE
FM MODE
PLAY MODE REPEAT
AUTO PRESET
AUTO PRESET
4
¢
CANCEL
PTY/EON TITTLE/EDIT ENTER
DISPLAY
SET
OPEN/CLOSE
SET
CANCEL
/CHARA.
UP
CANCEL
UP/DOWN
OPEN/CLOSE
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
SET
<
>
DOWN
FM/AM
MD
AUX
CD
FM/AM
AUX
FM/AM
MULTI JOG
VOLUME
MOS - FET
TAPE
4 / ¢
FM/AM
MULTI JOG
STEREO/MONO
indicator
VOLUME
You can tune in FM and AM (MW/LW) stations manually,
automatically, and use the preset station feature.
• Auto Tuning
Opening the sliding panel, press and hold 4 / ¢
(lower/higher frequencies) button for a second or more
to start searching a station and stop automatically until
the station of sufficient signal strength is tuned in.
• Preset Station Tuning
Tuning in a Station
Rotate MULTI JOG dial clockwise to increase the
preset number or counterclockwise to decrease it
until the desired station is easily found.
1 Press FM/AM button.
The system automatically turns on and tunes in the last
tuned station (either FM or AM—MW/LW). The
following information appears in the display window.
Using the remote control:
UP/DOWN button on the remote control also has
the same function as MULTI JOG dial on the front
panel.
Preset number
• Each time you press the button, the band alternates
between FM and AM.
• If a program on FM band is broadcast in stereo,
STEREO indicator lights.
Preset Station
You are possibly not allowed to use the feature until
the station presetting completes.
In some cases, test frequencies have been already
memorized for the system since the factory examined
the preset station features before shipment. This is
not a malfunction.
2 Select a station using one of the following three
methods.
• Manual Tuning
Opening the sliding panel, press 4 / ¢ (lower/
higher frequencies) button repeatedly to change the
frequencies step by step until you find the desired
station.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To preset stations automatically — Auto Preset
You can automatically preset 30 FM, 15 AM (MW/LW)
stations. Preset numbers will be allocated as stations are
found, starting from the lowest frequency and moving up
to the higher frequency.
Presetting Stations
You can preset up to 30 FM and 15 AM (MW/LW) stations
into memory by following two methods: manual/automatic
presettings.
On the remote control only:
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
1 Press FM/AM button to select a desired band.
2 Press and hold AUTO PRESET button on the
remote control for more than two seconds.
The system automatically starts searching for stations
with the strong signals continuously, and they are stored
successively into memory as follows:
To preset stations manually — Manual Preset
1 Press 4 / ¢ (lower/higher frequencies) button
to tune in the desired station manually.
«
«
«
2 Press SET button.
“SET” appears in the display window for a while (not
blinking).
• Note that “SET” message disappears, presetting
procedure is cancelled.
3 Rotate MULTI JOG dial or press repeatedly UP/
DOWN button to select the preset channel numbered
from 1 to 30 on FM, or 1 to 15 on AM.
When you unplug the AC power cord
or if a power failure occurs
The preset stations will be erased in a few days.
If this happens, preset the stations again.
To change the FM reception mode
• When an FM stereo broadcast is hard to receive or noisy,
press FM MODE button on the remote control so that
MONO indicator lights in the display window. Reception
improves.
• Note that the selected channel “02” disappears,
presetting procedure is cancelled.
• To restore the stereo effect, press FM MODE button
again so that STEREO indicator lights in the display
window.
4 Press SET button again.
“STORED” appears in the display window for a
while.
In this stereo mode, you can hear stereo sounds when a
program is broadcast in stereo.
5 The tuned station in step 1 is now stored in the
preset channel selected in step 3.
Storing a new station on an used channel
erases the previously stored one.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving FM Stations with RDS
BASS
TREBLE FM MODE
Buttons behind the sliding panel
PLAY MODE REPEAT
AUTO PRESET
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
SET
4
¢
CANCEL
ENTER
PTY/EON TITTLE/EDIT ENTER
DISPLAY
PTY/EON
DISPLAY/CHARA.
CANCEL
/CHARA.
UP
SET
<
>
UP/DOWN
FM/AM
DISPLAY/CHARA.
DOWN
FM/AM
MD
AUX
CD
TAPE
OPEN/CLOSE
STANDBY/ON
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
AUX
FM/AM
MULTI JOG
VOLUME
MOS - FET
VOLUME
FM/AM
RDS mode indicators
RDS allows FM stations to send an additional signal along
with their regular program signals. For example, the stations
send their station names, as well as information about what
type of program they broadcast such as sports and music.
Changing the RDS Information
You can see RDS information in the display window while
listening to an FM station.
• RDS operations are possible only using the remote control
except DISPLAY/CHARA. button.
When tuned in an FM station which provides the RDS
service, RDS indicator lights in the display window. You
can receive the following types of RDS signals.
Press DISPLAY/CHARA. button repeatedly while
listening to an FM station.
Each time you press the button, the display window
changes to show the following information:
PS (Program Service):
Shows commonly known station names.
PS
PTY
RT
(Radio Text)
PTY (Program Type):
(Program Service) (Program Type)
Shows types of broadcast programs.
(Preset channel number)
RT (Radio Text):
Shows text messages the station sends.
If no PS, PTY, or RT signals are sent by a station
“NO PS,” “NO PTY,” or “NO RT” appears in the
display window.
If the unit takes time to show RDS information
received from a station
EON (Enhanced Other Networks):
Provides the information about the types of the
programs sent by other RDS stations than the one
being received.
“PS,” “PTY,” or “RT” may appear in the display
window.
More about RDS
•
Not all the FM stations provide RDS signals, nor
do all RDS stations provide the same services. If
in doubt, check with local radio stations for
details on RDS in your area.
•
RDS may not work correctly if the received
station is not transmitting the signals properly or
if the signal strength is weak.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Searching for Programs by PTY Codes
(PTY Search)
Switching to a Program Type Temporarily
The EON function allows the system to switch temporarily
to a broadcast program of your choice (News, TA, and/or
Info) from a different station except when you are listening
to a non-RDS stations — some FM stations and AM (MW/
LW) stations.
• EON indicator lights while receiving a station with the
EON code.
• EON function is applicable only to preset stations.
One of the RDS advantages is that you can locate a particular
kind of program by specifying the PTY codes.
• The PTY Search is applicable only to preset stations.
• There is a time limit in doing the following steps. If the
setting is canceled before you finish, start from step 1
again.
To search a program, use the remote control.
To activate the EON function, use the remote control.
1 Press PTY/EON button on the remote control while
listening to an FM station.
1 Press PTY/EON button.
The last EON data type selected and “SELECT EON”
appears and starts blinking in the display window.
“SELECT PTY” appears and starts blinking in the
display window.
2 Press UP/DOWN button repeatedly to select the EON
data type you want.
2 Press UP/DOWN button repeatedly to select a PTY
code while “SELECT PTY” is blinking.
Each time you press the button, the EON data types
change as follows:
Each time you press the button, the PTY codes change
as follows (refer also to the list on page 19):
(Blank indications) = TA = News = Info = TA
News = News Info = TA Info = TA News Info =
(back to the beginning)
News “ Affairs “ Info “ Sport “ Educate
“ Drama “ Culture “ Science “ Varied “
Pop M “ Rock M “ Easy M “ Light M “
Classics “ Other M “ Weather “ Finance “
Children “ Social “ Religion “ Phone In “
Travel “ Leisure “ Jazz “ Country “ Nation
M “ Oldies “ Folk M “ Document “ Test
“ Alarm! “ (back to the beginning)
TA:
News:
Info:
Traffic announcement
News
Program the purpose of which is to impart
advice in the widest sense.
3 Press SET button to enter the EON data types.
RDS system switches to EON standby mode to receive
a desired data type.
3 Press SET button to enter the PTY code.
While searching, “SEARCH” appears in the display
window.
When the program is over, the indicator of received PTY
code stops blinking and remains lit, but the EON function
still remains activated.
The unit searches 30 preset FM stations, and stops when
it finds the one you have selected, and tunes in that
station.
• To cancel the EON function:
Press PTY/EON button again so that TA/News/Info
indicator goes off.
• To continue searching after the first stop:
Press SET button again while the indications in the
display window are blinking.
If no program is found, “NOT FOUND” appears and
the unit returns to the last received station.
• To stop searching during the process:
Press PTY/EON button while searching.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
More about the EON function
How the EON function actually works:
CASE 1
•
•
EON data sent from some stations may not be compatible with
this unit.
If there is no station broadcasting the program you
have selected
While listening to a program tuned in by the EON function,
the station does not change even if another network station
starts broadcasting a program of the same EON data.
While listening to a program tuned in by the EON function,
you can only use PTY/EON and DISPLAY/CHARA. buttons
as the tuner operation buttons.
If the stations alternate intermittently between the station
tuned by the EON function and the currently tuned station
(“WAITING” flashes in the display window), press PTY/EON
button to cancel the EON function.
The unit continues tuning in the current station.
•
•
«
When a station starts broadcasting the program you
have selected, the unit automatically switches to the
station. The indicator of received PTY code starts
flashing.
If you do not press the button, the currently tuned station is
received finally, and the indication of the EON data type
flashing in the display window disappears.
«
When the program is over, “EON END” appears in the
display window, and the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 2
If there is a station broadcasting the program you
have selected
The unit tunes in the program. The indicator of
received PTY code starts flashing.
«
When the program is over, “EON END” appears in the
display window, and the unit goes back to the
previously tuned station, but the EON function still
remains activated.
CASE 3
If the FM station you are listening to is
broadcasting the program you have selected
The unit continues to receive the station but the
indicator of received PTY code starts flashing.
«
When the program is over, the indicator of received
PTY code stops flashing and remains lit, but the EON
function still remains activated.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Description of the PTY codes:
News:
News.
Finance:
Stock market reports, commerce, trading
etc.
Affairs:
Topical program expanding or enlarging
upon the news — debate or analysis.
Children:
Programs targeted at a young audience.
Info:
Program the purpose of which is to impart Social:
advice in the widest sense.
Programs about sociology, history,
geography, psychology and society.
Sport:
Program concerned with any aspect of Religion:
Religious programs.
sports.
Phone In:
Involving members of the public expressing
their views either by phone or at a public
forum.
Educate:
Drama:
Culture:
Educational programs.
All radio plays and serials.
Travel:
Travel information.
Programs concerning any aspect of national
or regional culture, including language, Leisure:
Programs about recreational activities.
Jazz music.
theater.
Jazz:
Science:
Varied:
Programs about natural sciences and
technology.
Country:
Songs which originate from, or continue the
musical tradition of theAmerican Southern
States.
Used for mainly speech-based programs
like quizzes, panel games and personality
interviews.
Nation M:
Oldies:
Current popular music of the nation or
region in that country’s language.
Pop M:
Commercial music of current popular
appeal.
Music from the so-called “golden age” of
popular music.
Rock M:
Easy M:
Rock music.
Folk M:
Document:
Test:
Music which has its roots in the musical
culture of a particular nation.
Current contemporary music considered to
be “easy-listening.”
Program concerning factual matters,
presented in an investigative style.
Light M:
Classics:
Other M:
Weather:
Instrumental music, and vocal or choral
works.
Broadcast when testing emergency
broadcast equipment or receivers.
Performances of major orchestral works,
symphonies, chamber music, etc.
Alarm!:
Emergency announcement.
Music not fitting into any of the other
categories.
Classification of the PTY codes for some FM
stations may be different from the above list.
Weather reports and forecasts.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back a CD
Buttons behind the sliding panel
BASS
TREBLE FM MODE
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
SET
CANCEL
ENTER
4
¢
PLAY MODE
REPEAT
PLAY MODE REPEAT
AUTO PRESET
PTY/EON TITTLE/EDIT ENTER
DISPLAY
SET
CANCEL
/CHARA.
UP
CANCEL
4
¢
CANCEL
SET
PLAY MODE
SET
<
>
UP/DOWN
0 (open/close)
DOWN
FM/AM
STANDBY/ON
MD
AUX
CD
<
>
/
M
I
C
R
O
C
O
M
P
O
N
E
N
T
E
R
T
E
R
TAPE
CD 6 (play/pause)
4 / ¢
FM/AM
MULTI JOG
MOS - FET
7 (stop)
VOLUME
7 (stop)
6 (play/pause)
Playback mode
indicators
MULTI JOG
You can use Normal, Program, Random, or Repeat Play.
• When using the buttons behind the sliding panel, press
OPEN/CLOSE button on the AX-UXG6 to open the
sliding panel first.
• When using the remote control, press CD 6 (play/
pause) button first and 7 (stop) button successively.
•
DO NOT try to open or close the CD tray by
hands as it will be damaged.
DO NOT place any foreign matters.
DO NOT prevent the tray from opening and
closing, because it may results damages on the
unit.
•
•
Playing Back the Entire Disc — Normal Play
3 Press 0 (open/close) button again.
The disc tray closes while the information appears
one after another as follows.
1 Press 0 (open/close) button on CD unit.
The system automatically turns on and the disc tray
comes out.
«
«
Total track number
Total playback time
2 Place a disc correctly on the circle of the disc tray,
with its label side up.
• When closing the tray without a CD placed, “CD NO
DISC” appears.
When pressing 6 (play/pause) button directly,
the system starts playback a CD immediately.
Good
No Good
• When using a CD single (8 cm), place it on the
inner circle of the disc tray.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
4 Press 6 (play/pause) button on the CD unit.
Each track of the CD starts playing one after another,
and stops when the final track has finished playing.
To go to another track
Before or during playback, press 4 / ¢ button
repeatedly:
Press ¢ button:
Skips to the beginning of the next and succeeding
tracks.
Press 4 button:
Goes back to the beginning of the current and
previous tracks.
• To stop playing back for a moment, press 6
(play/pause) button on the CD unit.
The playback time starts blinking in the display
window.
Rotating MULTI JOG dial clockwise also changes the tracks
forwards quickly, while rotating it counterclockwise the
tracks reverse quickly.
• To resume playback, press 6 (play/pause)
button again.
Playback continues from the point where it was
stopped for a while.
< / > button on the remote control is also available
to skipping operations.
Programing the Playing Order of the Tracks
— Program Play
5 Press 7 (stop) button to stop playing back the CD.
Following information for the CD appears in the display
window.
You can arrange the order in which the tracks play before
you start playback. You can program up to 32 tracks.
Total track number
Total playback time
1 Place a CD.
• If the current playing source is not the CD, press
6 (play/pause) button on the CD unit, then 7
(stop) button before going to the next step.
6 Press 0 (open/close) button on the CD unit to
remove the CD.
• Pressing 0 (open/close) button during playback
directly, the CD unit stops playback and opens CD
tray.
2 Press PLAY MODE button repeatedly until “CD
PROGRAM” appears in the display window.
Searching and Skipping Tracks
• Each time you press the button, playback mode
indicators also change as follows:
While playing back a CD, you can do the following
operations.
PROGRAM
RANDOM
To search and skip to a particular point in a track
During playback, press and hold 4 / ¢ button to meet
the desired passages in a track:
Canceled
(Normal play)
3 Rotate MULTI JOG dial to select a track number to
Press and hold ¢ button:
Fast forwards in the track.
Press and hold 4 button:
Fast reverses in the track.
be programed (< / > buttons also available).
UP/DOWN button on the remote control is also
available to searching operations.
Track number
Program number
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
To erase all the programed data
4 Press SET button to program the track number.
After playing back the CD, you can erase all the programed
track data by pressing 7 (stop) button. New program can
be entered again.
To exit from the Program play mode
Before or during playback, you can exit from Program play
mode as follows:
Track number
Program number
Here the track number 2 on the CD is stored into a
program number 1, and shortly after that the total
playback time of programed tracks appears in the display
window as follows:
• Before playback, press PLAY MODE button twice.
• During playback, press 7 (stop) button then PLAYMODE
button twice.
Playback mode indicator goes off and the system resumes
Normal play mode.
Pressing 0 (open/close) button to open the CD tray
also quits and erases the program play.
Total playback time
5 Repeat steps 3 to 4 to program other tracks you
want up to 32 tracks.
•
•
If you try to program a 33rd step
“MEMORY FULL” will appear in the display
window, and your entry is ignored.
The total playback time of programed tracks
exceeds 99’59”
“– – : – –” will appear in the display window.
6 Press 6 (play/pause) button on the CD unit.
The programed tracks are played back in the order you
have set.
• Other CD operations are the same as Normal play.
7 Press 7 (stop) button to quit the program play.
• When Program play finished, CD unit automatically
stops.
To check the program contents
Before playing back the CD, you can check the program
contents by using 4 / ¢ button.
Press ¢ button:
Shows the programed tracks in the programed
order.
Press 4 button:
Shows them in the reverse order.
To modify the program
Before playing back the CD, you can erase the last
programed track by pressing CANCEL button. Each time
you press the button, the last programed track is erased from
the end of program.
• To add new tracks to the program before you start
playing-back, simply select a track number again you
want to add (repeat steps 3 to 4).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
Playing at Random — Random Play
Repeating Tracks — Repeat Play
The tracks of the loaded CD will play in no special order
(at random) when you select this mode.
You can have the entire disc, the programed tracks, or the
individual track repeat as many times as you like.
1 Place a CD.
1 Place a CD.
If the current playing source is not the CD, press 6
(play/pause) button on the CD unit, then 7 (stop) button
before going to the next step.
If the current playing source is not the CD, press 6
(play/pause) button on the CD unit, then 7 (stop) button
before going to the next step.
2 Press PLAY MODE button repeatedly until “CD
2 Press REPEAT button on the remote control
repeatedly to set the repeat mode.
RANDOM” appears in the display window.
• Each time you press the button, repeat mode indicators
light in the display window, and Repeat playback
mode changes as follows:
• Each time you press the button, playback mode
indicator also changes as follows:
Canceled
(Normal play)
PROGRAM
RANDOM
Canceled
(Normal play)
:
Repeats one track on the CD or in a
program.
Repeats all the tracks on the CD or a
program.
3 Press 6 (play/pause) button on the CD unit.
:
The track numbers are shuffled in the display window
for a few seconds, and start playing back at random.
Random play ends when all the tracks are played back
once.
3 Press 7 (stop) button to quit Repeat play.
To exit from Repeat play mode
Pressing REPEAT button repeatedly until repeat mode
• Other CD operations are the same as Normal play.
indicators (
and
) goes off in the display window.
Combining play modes:
4 Press 7 (stop) button to quit Random play.
•
•
When combining Program play and Repeat play,
you can repeat whole the programed tracks or
one track among them (
When combining Random play and Repeat play,
you can just repeat whole the shuffled tracks
To exit from Random play mode
Before playing back the CD, you can exit from Random
play mode as follows:
and
).
(only
).
• Before playback, press PLAY MODE button once.
• During playback, press 7 (stop) button then press
PLAY MODE button once.
Play mode indicator goes off and the system resumes the
normal play mode.
Pressing 0 (open/close) button to open the CD
tray also quits and erases the random play.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back a Tape
DISPLAY
CANCEL
/CHARA.
Buttons behind the sliding panel
UP
SET
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
<
>
SET
4
¢
CANCEL
ENTER
DOWN
FM/AM
TAPE ` (playback)
MD
AUX
CD
TAPE
7 (stop)
4
¢
π (auto reverse)
0 (open/close)
4 / ¢
VOLUME
DOLBY
B
NR
REC PAUSE
AUTO
REVERSE
REC
` (playback)
7 (stop)
DOLBY B NR
Tape operation indicators
You can listen to Normal (Type I), High position (TypeII),
and Metal (Type IV) type tapes without further settings.
• When using the inner buttons, press OPEN/CLOSE button
on AX-UXG6 unit to open the sliding panel first.
• When using the remote control, press TAPE 23
(playback) button first and 7 (stop) button successively.
•
DO NOT try to open or close the tape tray by
hands as it will be damaged.
DO NOT place any foreign matters.
DO NOT prevent the tray from opening and
closing, because it may results damages on the
unit.
•
•
DO NOT use tapes longer than 120 minutes.
The characteristic deterioration may occur and these
tapes easily jam in the tape transport mechanism.
3 Press 0 (open/close) button again to close the tray.
4 Press ` (playback) button on the unit or TAPE
` (playback) button on the remote control.
The tape playback starts and the tape direction indicator
blinks slowly in orange to show the tape running
direction.
Playing Back a Tape — Basic Operation
1 Press 0 (open/close) button on the cassette deck
REC
Tape direction indicator
unit.
The system automatically turns on and the tape tray
comes out.
• Each time you press ` (playback) on the cassette
deck unit or TAPE ` (playback) button on the remote
control, you can change the tape sides to be played
back currently.
3 : plays the forward side.
2 : plays the reverse side.
Playback comes to an end (Auto Reverse)
The cassette deck unit automatically changes the tape
direction to the reverse side, and continue playback
both sides. Each time to press the button, Auto
Reverse feature is set to on/off alternately.
2 Place a tape on the tray with the side you want to
listen to facing up (forward side).
Tape fits in the caved-in area so that an exposed edge
of the tape faces toward the inside of the unit.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
5 Press 7 (stop) button to stop playback the tape.
To skip forward to the next music
Press the button same as the tape direction indicator as
follows:
6 Press 0 (open/close) button directly to stop and
remove the tape.
3 ] Press ¢ button.
2 ] Press 4 button.
While the system is turned off (standby mode)
Pressing ` (playback) or TAPE ` (playback)
button automatically switches the system turned on
and starts playback if a tape is already loaded.
During Music Scan progressed, the tape direction
indicator starts blinking rhythmically.
REC
REC
or
reverse
forward
Fast-Winding a Tape
Repeating Music Scan feature made easy
searching a desired program on a tape one after
another.
While stopping the tape, press 4 / ¢ button to fast-
wind the tape.
The beginning of the desired program may not be
located properly
If blanks between music are too short, the blanks
contain too much noise or the program itself
contains very low-level or silent part.
To fast-forward, if the current tape direction is:
3 ] Press ¢ button.
2 ] Press 4 button.
To fast-rewind, if the current tape direction is:
3 ] Press 4 button.
Playing Back Dolby-Recorded Tape
2 ] Press ¢ button.
You can play back the tape recorded with Dolby B NR
system. The Dolby NR system allows to reduce hiss noise
in playback.
During fast-winding, the tape direction indicator starts
blinking quickly.
Press DOLBY B NR button on the cassette deck before
playback. Each time you press the button, the Dolby NR
lamp on the unit lights up orange or turns off.
REC
REC
or
reverse
forward
When the tape comes to an end
The deck unit automatically stops.
A tape recorded using Dolby NR
Should be played back using the Dolby NR of the
same type as that used in recording. The audio quality
will be affected if a different type is used in playback.
Searching and Skipping to Each Program
— Music Scan
Dolby Noise Reduction manufactured under license from
Dolby Laboratories Licensing Corporation. “Dolby” and
double-D symbol are registered trademarks of Dolby
Laboratories Licensing Corporation.
While playing the tape, you can search and skip to the
beginning of the current and next program on a tape.
Music scan searches for blank portions that usually
separate programs recorded onto the tape, then
automatically plays the program beginning after
that blank portion.
To skip backward to the current music
Press the button opposite to the tape direction indicator
as follows:
3 ] Press 4 button.
2 ] Press ¢ button.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording onto a Tape
Buttons behind the sliding panel
PTY/EON TITTLE/EDIT ENTER
DISPLAY
CANCEL
/CHARA.
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
4
¢
SET
CANCEL
ENTER
UP
SET
<
>
DOWN
FM/AM
AUX
MD
AUX
CD
SET
REC MODE
TAPE ` (playback)
TAPE
CD
6
(play/pause)
π (auto reverse)
0 (open/close)
7
(stop)
FM/AM
DOLBY
B
NR
VOLUME
REC PAUSE
AUTO
REVERSE
REC
REC PAUSE
` (playback)
7 (stop)
DOLBY B NR
Tape operations indicators
Two types of cassette tapes can be recorded onto, including
normal (Type I), and High position (Type II) tapes. These
types are identified automatically by the cassette deck unit
and the recording level is also corrected automatically.
Neither volume level nor sound effects during playback does
affect to the recording.
Make sure to select a source first, otherwise you
cannot use recording function.
2 Place a recordable tape with the side you want to
record facing up.
Press 0 (open/close) button on the cassette deck unit to
open the tape tray; place a tape on it; and press 0 (open/
close) button again to close it.
IMPORTANT:
• It should be noted that it may be unlawful to pre-
recorded tapes, records, or discs without the consent
of the owner of copy right in the sound or video
recording, broadcast or cable program and in any
literary, dramatic, or artistic embodied therein.
Manual Recording onto a Tape
• You cannot record onto the tape without a protect tab.
When using that tape, cover the hole for desired side
with adhesive tape.
1 Select one of the recording sources — FM/AM
broadcasts, CD, or other external equipment.
• To record FM/AM broadcasts, receive a station with
Tuner unit.
\
• To record a CD or its tracks programed, set the play-
pause mode for CD unit.
• To record from an external equipment connected to
ANALOG IN jacks, prepare it as required.
3 Press REC PAUSE button on the cassette deck unit.
REC
REC indicator
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
REC indicator lights red to show the recording pause
mode, and “TAPE REC” appears in the display window
as follows,
•
Dolby B NR
Press DOLBY B NR button before recording to
reduce frequency response noise.
When the tape is played back later, also press the
button with its lamp lit.
•
BEAT CUT on AM (MW/LW)
When recording AM broadcast, beats noise may
be heard.
or
Set the BEAT CUT selector to either position 1 or
2 on the rear panel of the cassette deck unit to
reduce the noise.
To change the recording source
You cannot change the selected source during the
recording pause mode. To exit from the recording
pause mode, press 7 (stop) button on the cassette deck
unit.
Recording in Auto Reverse
1 Select one of the recording sources — FM/AM
To make the blank tape
broadcasts, CD, or other external equipments.
Press AUX button to start recording without
connecting nor playing back the external equipment.
2 Make sure the tape side for recording meets the
tape direction indicator 3 (forward).
REC
4 Press Tape ` (playback) button for FM/AM
broadcasts or 6 (play/pause) button on the CD unit
to start recording.
forward
reverse
Tape direction indicator starts blinking slowly in the
display window.
• Each time to press ` (playback) button or TAPE `
(playback) button on the remote control, you can
change the tape direction to be recorded onto.
3 : Good, records onto the forward side.
REC
Tape direction indicator
2 : No good, records onto the reverse side.
• To stop recording for a moment, press REC PAUSE
button on the cassette deck unit. Tape direction
indicator stops blinking in the display window.
• To resume recording, press ` (playback) button
again. Recording continues from the point where it
was stopped for a while.
•
The recording in the auto reverse mode stops
automatically after completing recording onto the
2 (reverse) direction side.
Be sure to start recording from the 3 (forward)
direction side.
•
When the auto reverse mode is set to off, recording
stops after having recorded onto one side of the
tape.
5 Press 7 (stop) button on the cassette deck unit for
FM/AM broadcasts recording, or 7 (stop) button on
the CD unit for the CD recording.
3 Press ∏ (auto reverse) button on the cassette deck
unit to set the reverse mode on.
Recording stops and REC indicator goes off in the
display window.
The auto reverse lamp lights orange on the front panel.
On CD recording, cassette deck unit will stop
after leaving a non-recorded portion of 4 seconds.
If you want to quit recording immediately, press
7 (stop) button on the cassette deck unit.
4 Press REC PAUSE button on the cassette deck unit.
5 Repeat the steps 4 to 5 of “Manual Recording onto
a Tape” mentioned in the left column.
6 Press 0 (open/close) button on the cassette deck
unit to remove the tape.
• Pressing 0 (open/close) button directly during
recording , the cassette deck unit stops recording and
opens the tape tray.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
When CD playback finished, the CD unit first, then
the cassette deck stops recording automatically.
Synchronized Recording from a CD
CD application on UX-G6R system can be recorded with
a simple, one-touch operation.
Cassette deck unit will stop after leaving a non-
recorded portion of 4 seconds.
If you want to quit recording immediately, press
7 (stop) button on the cassette deck unit.
1 Place a recordable tape and a source CD into each
tray.
• To record using Dolby B NR, press the DOLBY B
NR button before recording so that its lamp near the
button lights orange.
5 Press 0 (open/close) button on each unit to remove
the CD and the tape.
2 Press 6 (play/pause) button on the CD unit, then
7 (stop) button to set the system to CD operation
mode.
Recording from the External Equipment
You can record audio sources played-back on the external
equipment onto a tape manually.
First of all, make sure to connect the external equipment
properly (see also page 9).
3 Press REC MODE button behind the sliding panel.
The display window shows information as follows:
Recording an external audio source manually
1 Press AUX button to show “AUX” in the display
window.
4 Press SET button.
The external audio source is selected.
Display window shows as follows:
2 Repeat the steps 2 and 3 on page 26 to prepare a
tape to record.
Information appears as follows:
then
3 Press ` (playback) button on the cassette deck unit
or TAPE ` (playback) button on the remote control
to start recording.
UX-G6R starts playback on the CD unit as well as
recording on the cassette deck unit simultaneously.
You can get an entire copy of the source CD.
Tape direction indicator starts blinking slowly in the
display window.
To select a particular track or program, use REC
PAUSE button on the cassette deck unit. During SYNC
REC mode, you cannot operate CD unit except 7 (stop)
button.
REC
Tape direction indicator
• To make recording pause temporarily, press REC
PAUSE button on the cassette deck unit.
• To resume recording, press ` (playback) button
on the cassette deck unit.
4 Start playing back the external equipment.
• To stop recording for a moment, press REC PAUSE
button on the cassette deck unit. Tape direction
indicator stops blinking in the display window.
• To resume recording, press ` (playback) button
again.
Using Program play for CD recording
To edit CD’s tracks to be recorded, it is useful to set
the desired tracks to be played back into a program
in advance.
• To end the recording, press 7 (stop) button on the
cassette deck unit.
Recording stops and REC indicator goes off in the
display window.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timers
Buttons behind the sliding panel
REMOTE CONTROL RM-SUXG6R
PANEL
DISPLAY
/CHARA.
PLAY
MODE
REC
MODE
TITLE
/EDIT
CLOCK
/TIMER
SET
4
¢
CANCEL
ENTER
OPEN/CLOSE
DIMMER
(standby/on)
SLEEP
ACTIVE
SLEEP
CLOCK/TIMER
BASS EX.
CLOCK/TIMER
BASS
TREBLE FM MODE
SET
PLAY MODE REPEAT
AUTO PRESET
CANCEL
CLOCK/TIMER
OPEN/CLOSE
STANDBY/ON
PTY/EON TITTLE/EDIT ENTER
DISPLAY
OPEN/CLOSE
STANDBY/ON
CANCEL
/CHARA.
M
I
C
R
O
C
O
M
P
O
N
E
N
T
S
Y
S
T
E
M
U
X
-
G
6
R
CANCEL
SET
UP
SET
<
>
REC
AUX
FM/AM
MULTI JOG
VOLUME
<
>
MOS - FET
/
DOWN
FM/AM
MD
AUX
CD
TAPE
Timer indicators
MULTI JOG
• Each time you press the button, the timer mode
changes as follows:
On UX-G6R system, three timer features are available —
Recording Timer, Daily Timer, and Sleep Timer.
Before using these timers, you need to set the clock built in
the system (see page 10).
DAILY TIMER
(canceled)
DAILY TIMER
ON
0:00
REC TIMER
REC TIMER
Clock
ON
0:00
Using Recording Timer
< >
2 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the hour of the timer-
on time, then press SET button.
With Recording Timer, you can make a tape of a radio
broadcast automatically.
• You can set RecordingTimer whether the system is turned
on or off.
• To correct a mis-entry any time during the setting process,
press CANCEL button.
< >
3 Rotate MULTI JOG dial ( / button on the remote
How Recording Timer actually works
The system automatically turns on, tunes into the specified
station, turns off the volume, and starts recording when the
timer-on time comes.
control also available) to select the minute of the
timer-on time, then press SET button.
Then, when the timer-off time comes, the system
automatically turns off (standby).
The timer settings remain stored in memory until you reset
them or unplug the AC power cord.
< >
4 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the hour of the timer-
off time, then press SET button.
1 Press CLOCK/TIMER button repeatedly until
“REC TIMER” and its timer-on time appear in the
display window.
You can select the timer-on/off time, a tuner preset
channel to record, and recording media.
• If MD recorder XM-G6 (not supplied) connected, you
can select MD as recording media (see page 7).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
< >
5 Rotate MULTI JOG dial ( / button on the remote 2 Press SET button to call the previous settings for
control also available) to select the minute of the
timer-off time, then press SET button.
next timer recording.
The REC timer indicator lights, and the setting items
appear one after another in the display window.
• To erase the recording timer, press CANCEL button
in this step.
< >
6 Rotate MULTI JOG dial ( / button on the remote
Using Daily Timer
control also available) to select either “TUNER FM”
or “TUNER AM,” then press SET button.
With Daily Timer, you can wake up on your favorite music
or radio program.
• You can set the daily timer whether the system is turned
on or off.
< >
7 Rotate MULTI JOG dial ( / button on the remote
control also available) to select a preset channel, then
press SET button.
How Daily Timer actually works
The system automatically turns on, and starts playing the
specified source when the timer-on time comes. Then, when
the timer-off time comes, the system automatically turns
off (standby).
The timer settings remain stored in memory until you reset
them or disconnect the AC power cord.
“TAPE REC” follows in the display window as selected
recording media, unless any MD recorder connected.
• If XM-G6 MD recorder connected, you can select
either a tape or an MD as recording media.
1 Press CLOCK/TIMER button repeatedly until
“DAILY TIMER” and its timer-on time appear.
• Each time you press the button, the timer mode
changes as follows:
8 Press SET button to select recording media, and turn
off the system.
DAILY TIMER
After completing the settings...
(canceled)
DAILY TIMER
ON
0:00
The REC timer indicator lights and the setting items appear one
after another in the display window. Thus the Recording Timer is
ready for unattended recording.
REC TIMER
REC TIMER
Clock
ON
0:00
< >
2 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the hour of the timer-
on time, then press SET button.
REC
REC timer indicator
After a timer recording is complete...
Set the volume to an appropriate listening level.
If you press a certain button while Recording
Timer is operating
Recording will stop.
< >
3 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the minute of the
timer-on time, then press SET button.
To use the same Recording Timer settings
repeatedly
Once you have set the recording timer, it remains stored
in memory until you change it.
To activate the recording timer with the previous settings,
follow the procedure below:
< >
4 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the hour of the timer-
off time, then press SET button.
1 Press CLOCK/TIMER button repeatedly until
“REC TIMER” appears in the display window.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Continued
< >
5 Rotate MULTI JOG dial ( / button on the remote 8 Rotate MULTI JOG dial (UP/DOWN button on the
control also available) to select the minute of the
timer-off time, then press SET button.
remote control also available) to adjust the volume
level, then press SET button.
• You can adjust the volume within the range of “0” to
“50.” If you select “– –,” the volume is set to the
previous level when the unit is turned off.
< >
6 Rotate MULTI JOG dial ( / button on the remote
control also available) to select the source, then press
SET button.
After completing the settings...
The daily timer indicator lights, and the setting items appear one
after another in the display window.
Turns off the unit (standby) if you have set the daily timer with
the unit turned on.
TUNER
FM
TUNER
AM
(
)
MD
CD
(
AUX
TAPE
AUX
)
DIGITAL
REC
DAILY timer indicator
TUNER FM: Tunes into a preset FM station. Go to
step 7.
If you press a certain button while Daily Timer is
operating
The unit will not turn off automatically.
TUNER AM: Tunes into a preset AM station. Go to
step 7.
CD:
Plays a CD. Prepare a CD, then go to
step 7.
(MD):
TAPE:
AUX*:
Plays a MD, only when XM-G6 MD
recorder connected. Then go to step 7.
Plays a tape. Prepare a tape, then go to
step 8.
Selects “AUX” as the source. Make the
external equipment ready for playback.
To use the same Daily Timer settings repeatedly
Once you have set Daily Timer, it remains stored in memory
until you change it.
To activate the daily timer with the previous settings, follow
the procedure below:
(AUX DIGITAL):
Selects an external digital audio
1 Press CLOCK/TIMER button repeatedly until
“DAILY TIMER” appears in the display window.
equipment as the source if connected.
* To use the external equipment with the Daily Timer,
it also has the timer function.
2 Press SET button to activate Daily timer.
The daily timer indicator lights, and the setting items
appear one after another in the display window.
• To deactivate the daily timer, press CANCEL button
in this step.
7 If you have selected FM/AM as the source in the
above step, select a preset channel.
< >
1) Rotate MULTI JOG dial ( / button on the remote
control also available) to select a preset channel.
2) Press SET button.
If you have selected CD as the source in the above
step, select a track.
< >
1) Rotate MULTI JOG dial ( / button on the remote
control also available) to select a track.
2) Press SET button.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Sleep Timer
Timer Priority
With Sleep Timer, you can fall asleep to your favorite music
or radio program.
Since each timer can be set separately, you may wonder
what happens if the setting for these timers overlaps.
Here are the priorities for each timer.
How Sleep Timer actually works
The system automatically turns off after the selected time
length passes while playing any source.
• Recording Timer has priority over Daily Timer and
Sleep Timer.
If Daily Timer is set to come on while Recording Timer
is operating, Daily Timer will not come on at all.
On the remote control only:
6:00
6:30
7:00
7:30
1 Press SLEEP button on the remote control
repeatedly to select the sleep timer.
• Each time you press the button, the time length
changes as follows:
Recording Timer
Daily Timer
10
20
30
60
90
120
Does not work.
(Canceled)
If Recording Timer is set to come on while Sleep Timer
is operating, Sleep Timer will be canceled several seconds
before Recording Timer comes on.
2 Wait for about 5 seconds after selecting the time
length.
6:00
7:30
6:30
7:00
When the sleep timer setting is completed, the display
window dims and just shows the remaining time until
the shut-off time minute by minute like “SLEEP 30”
then “SLEEP 29”.
Recording Timer
Sleep Timer
Canceled.
• To change the shut-off time, press SLEEP button
repeatedly until the desired time length appears.
• Sleep Timer has priority over Daily Timer.
If Daily Timer is set to come on while Sleep Timer is
operating, Daily Timer will not come on at all.
• To cancel the setting, press SLEEP button repeatedly
until the sleep timer indication disappears.
6:00
7:30
6:30
7:00
Sleep Timer
Daily Timer
Does not work.
Therefore, the equation is like this (high > low):
Recording Timer > Sleep Timer > Daily Timer
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and Additional Information
General Notes
In general, you will have the best performance by keeping
your CDs, cassette tapes and the mechanism clean.
• Store CDs and cassette tapes in their cases, and keep
them in cabinets or on shelves.
• Keep the CD disc tray, and the cassette tapes tray
closed when not in use.
Handling CDs
• Only CDs bearing this mark can be
used with this system. However,
continued use of irregular shape
CDs (e.g. heart shape, octagonal)
can damage the system.
• Remove the CD from its case by
holding it at the edge while
pressing the center hole lightly.
• Do not touch the shiny surface of
the disc, or bend the CD.
• Put the CD back in its case after
use to prevent warping.
• Be careful not to scratch the
surface of the CD when placing it
back in its case.
• Avoid exposure to direct sunlight,
temperature extremes, and
moisture.
• To clean the CD
Wipe the CD with a soft cloth in a
straight line from center to edge.
DO NOT use any solvent — such as conventional
record cleaner, spray, thinner, or benzine — to
clean the CD.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Handling Cassette Tapes
Types of Cassette Tapes
This cassette deck unit incorporates an Automatic Tape
Detection function. This mechanism uses the tape-type
detection holes to distinguishes which type of tape was
inserted, and sets the bias and equalizer to the optimum
settings for that tape automatically.
Cautions regarding handling
• Do not touch the surface of the tape or pull the tape out
of the cassette.
• Tape spooled loosely around the hubs is likely to jam in
the pinch rollers and capstans. Before loading the tape
into the cassette tray, take up the slack in the tape as shown
below.
The following types of tapes may be used with this cassette
deck unit.
Normal tape
TYPE I
BIAS: NORMAL
EQ:
120µs
Tape storage
• Place tapes in their cases for storage.
• Avoid storing tapes on top of TVs or speakers, in sunlight
or places of high temperature, or in humid or dusty areas.
Normal (No detection slots) Tab
(to prevent accidental erasure)
To prevent accidental erasure
High position (CrO ) tape
TYPE II
2
• Cassette tapes have tabs to prevent accidental erasure.
• If you remove the tabs after making a recording, the
cassette deck cannot be set to record when that tape is
loaded. Remove the tabs so that valuable
recordings will not be accidentally erased.
BIAS: HIGH
EQ:
70µs
Recording (erasure) is not possible when the tabs are
removed.
High position
detection slots
Metal tape (only for playback)
TYPE IV
BIAS: METAL
EQ:
70µs
For front side (A)
For reverse side (B)
• To make another recording on a tape whose tabs have
been removed, cover the tab holes with adhesive tape.
Metal detection slots
Tape-type detection slot
Adhesive tape
•
•
Certain early period Metal and High position
(CrO2) tapes may not have tape-type detection
slots. The cassette deck unit cannot obtain the
correct characteristics for these tapes.
Ferrochromite (FeCr) TYPE III tapes cannot be
used with this cassette deck unit.
DO NOT cover the tape-type detection slots.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you are having a problem with your system, check this list for a possible solution before calling for service.
If you cannot solve the problem from the hints given here, or the units has been physically damaged, call a qualified
person, such as your dealer, for service.
Symptom
No sound is heard.
Possible Cause
Action
•
•
•
Connections are incorrect, or
loose.
Headphones are connected.
•
•
•
Check all connections and make
corrections (see pages 6 – 9).
Disconnect the headphones (see
page 12).
Adjust the volume again (see
page 11).
Volume level is set to “– –”.
Poor radio reception.
•
•
•
•
The antenna is not connected
correctly.
•
•
•
•
Reconnect the antenna securely.
The AM loop antenna is too close
to the units.
Change the position and direction
of the AM loop antenna.
The FM antenna is not properly
extended and positioned.
Extend FM antenna to the best
reception position (see page 7).
The AM radio noise interferes
with tape recording.
Set the BEAT CUT selector again
(see page 27).
Unable to record onto a tape.
The CD skips.
•
•
You are using a tape without a
protect tab.
Tape-type detection slots are
covered by foreign matters.
•
•
Cover the hole with adhesive tape
(see page 34).
Remove the foreign matters.
•
•
The CD is dirty or scratched.
•
•
Clean or replace the CD (see page
33).
Unable to operate using the remote
control.
The path between the remote
control and the remote sensor on
the front panel is blocked.
Remove the obstruction.
•
•
•
•
•
The batteries have lost their
charge.
•
•
•
•
•
Replace the batteries (see page 6).
Plug in the AC power plug.
Loaded CD and tape cannot be
ejected.
The main AC power cord is not
plugged in.
The system is under the recording
operations.
Stop the recording if required (see
pages 27).
The CD does not play.
Operations are disabled.
The CD is upside down.
Put in the CD with the label side
up.
The built-in microprocessor has
malfunctioned due to external
electrical interference.
Unplug the system then plug it
back in.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Stereo Amplifier
AX-UXG6
Speaker System
Type:
Speaker unit:
SP-UXG6
Output power:
2-way Bass-Reflex Type
48 W (24 W + 24 W) at 6 Ω (Max.)
Woofer
Cone x 1
Tweeter
11.5 cm (4 9/16 in.)
42 W (21 W + 21 W) at 6 Ω (10% THD)
3
Load impedance:
6 Ω (6 Ω to 16 Ω allowance)
3.0 cm (1 /16 in.)
Balanced Dome x 1
Power handling capacity: 24 W
Audio output level/Impedance (at 1 kHz):
Sub Woofer 800 mV/440 Ω
Impedance:
6 Ω
Power requirement:
Power consumption:
AC 230 V , 50 Hz
63 W (at operation)
2.0 W (on standby: with
Dimmer)
Frequency range:
Sound Pressure Level:
Dimensions (approx.):
40 Hz – 20,000 Hz
85.5 dB/W•m
157 mm x 295 mm x 232 mm
(W/H/D)
(6 3/16 in. x 11 5/8 in. x 9 3/16 in.)
3.3 kg (7.3 lbs) each
Dimensions (approx.):
182 mm x 81 mm x 313 mm
(W/H/D)
(7 3/16 in. x 3 1/4 in. x 12 3/8 in.)
3.8 kg (8.4 lbs)
Mass (approx.):
Mass (approx.):
Supplied Accessories
See page 6.
Compact Disc/Tuner
XT-UXG6R
Audio input sensitivity/Impedance (at 1 kHz):
Design and specifications are subject to change without
notice.
AUX: 400 mV/47 kΩ
[CD section]
US and foreign patents licensed from Dolby
Laboratories Licensing Corporation.
Digital output:
OPTICAL DIGITAL OUT
Immeasurable
Wow and flutter:
[Tuner section]
FM tuning range:
AM tuning range:
87.50 MHz – 108.00 MHz
MW: 522 kHz – 1,629 kHz
LW: 144 kHz – 288 kHz
181 mm x 81 mm x 313 mm
(W/H/D)
(7 3/16 in. x 3 1/4 in. x 12 3/8 in.)
1.9 kg (4.2 lbs)
Dimensions (approx.):
Mass (approx.):
Cassette Deck
Frequency response :
Normal
TD-UXG6
30 Hz – 15,000 Hz
30 Hz – 16,000 Hz
High position
Wow and flutter:
0.1 % WRMS
Dimensions (approx.):
181 mm x 81 mm x 304 mm
(W/H/D)
(73/16 in. x 3 1/4 in. x 12 in.)
1.9 kg (4.2 lbs)
Mass (approx.):
36
Download from Www.Somanuals.com. All Manuals Search And Download.
VICTOR COMPANY OF JAPAN, LIMITED
EN
1299JTMMDWJSC
Download from Www.Somanuals.com. All Manuals Search And Download.
|