Intel® PRO/Wireless 2100 Network Connection Software
Administrators Installation Guide, Rev. 1.1
Document Revision History
Document Revision Number
Date
Comments
March 7, 2005
January 1, 2005
Initial release
ICS public posting version
ICS v1.1
iii
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
Administrators Installation Guide, Rev. 1.1
Contents
1 Introduction ...............................................................................................................................1
1.1 Scope................................................................................................................................1
2 PRO/Wireless 2100 Software Driver ............................................................................................2
2.1 Overview of the Driver .......................................................................................................2
2.2 Installing the Driver............................................................................................................2
2.3 Additional Command Line Options......................................................................................3
2.4 Upgrading the Driver..........................................................................................................3
3 PROSet Software........................................................................................................................4
3.1 Launching the PROSet Installer...........................................................................................4
3.1.1 Launching the PROSet Installer with Autorun Enabled ...............................................4
3.1.2 Launching the PROSet Installer with Autorun Disabled...............................................4
3.2 Installing PROSet...............................................................................................................4
3.2.1 Typical Installation ..................................................................................................4
3.2.2 Custom Installation..................................................................................................5
3.2.3 Command Line Installation.......................................................................................5
3.2.4 Silent Installation.....................................................................................................5
3.3 PROSet Features................................................................................................................5
iv
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
1 Introduction
This document describes how to install, configure, and uninstall Intel® PRO/Wireless 2100 LAN
MiniPCI Adapter software. This software is used to configure and manage Intel wireless LAN products
supporting the 2.4-GHz 802.11b IEEE specification.
1.1 Scope
This document presents detailed instructions for unattended and silent installation of the driver and the
Intel® PROSet/Wireless Software application, as well as for uninstalling and upgrading the driver and the
Intel® PROSet/Wireless Software application.
Applicable Intel® PROSet/Wireless Software version: 7.1.3
1
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
2 PRO/Wireless 2100 Software Driver
This chapter provides an overview of the SetupWLD Wrapper. Additionally, it provides the installation
procedure and command line options available to the SetupWLD Wrapper for Microsoft Windows 2000
and Microsoft Windows XP.
2.1 Overview of the SetupWLD Wrapper
This program can operate in the following modes:
•
•
•
The wireless MiniPCI adapter is installed into a system with an old driver installed
The wireless MiniPCI adapter is installed into a system with the same driver installed
The wireless MiniPCI adapter is not installed in the system
Based on the conditions above, the respective actions are:
•
•
•
Silent driver upgrade or installation
Silent driver reinstallation
Unattended installation (prepare the system to accept the Intel® PRO/Wireless 2100 LAN
MiniPCI Adapter and perform an unattended installation when the Intel® PRO/Wireless 2100
LAN MiniPCI Adapter is plugged in)
When this application is run after canceling the PnP hardware wizard, it installs the drivers. (The PnP
dialog displays when the hardware is inserted into a system with an operating system on which no Intel®
PRO/Wireless 2100 LAN MiniPCI Adapter is currently installed.) After the driver is copied to the
system, SetupWLD.exe triggers a rescan of the PCI bus to identify whether a card is present and installs
the driver automatically.
2.2 Installing the Driver
1. Upon booting, the system finds new hardware and brings up the Found New Hardware Wizard.
Click Cancel.
2. Open My Computer by double-clicking My computer on the desktop.
3. Locate the CD drive icon, right click the icon and select the Open menu item.
4. Go to Drivers folder.
5. Double-click on SetupWLD.exe. If the system prompts with a dialog box with the warning, click
Yes.
6. Wait until SetupWLD installs the driver and shows the message: Successfully installed and/or
uninstalled the drivers for the PRO/Wireless adapters.
7. If the system prompts with a dialog box indicating that the driver is not digitally signed, choose
Continue Anyway.
8. If the prompt You must restart your computer before the new settings take effect is shown,
click one of the buttons: Restart now or Restart later, according to your preference. If you do
not make a selection, within 20 seconds, the system will be automatically restarted.
2
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
2.3 Additional Command Line Options
Options
-Silent or /Silent
Meaning
Do not display any progress dialog boxes or error messages
Forces no reboot even if reboot is required after the install.
-NoReboot or /NoReboot
2.4 Upgrading the Driver
To upgrade using the SetupWLD Wrapper, simply run the standard SetupWLD Wrapper installation
procedure described in section 2.1. SetupWLD will detect the previous driver version and perform a
driver upgrade.
3
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
3 PROSet Software
The following sections contain the procedures for launching and installing the Intel® PROSet/Wireless
Software application and using PROSet command line options.
3.1 Launching the PROSet Installer
This section describes how to launch the PROSet Installer with Autorun enabled or with Autorun
disabled.
3.1.1 Launching the PROSet Installer with Autorun Enabled
1. Insert the installation CD and wait a few seconds.
2. If Autorun is enabled on your system, the Intel® PRO/Wireless Network Connection window
Installer with Autorun Disabled.
3. Click Install Software to launch PROSet installation. The Welcome to the InstallShield Wizard
3.1.2 Launching the PROSet Installer with Autorun Disabled
1. Open My computer.
2. Double-click the CD-ROM icon.
3. Double-click the Autorun application.
4. Click Install Software to launch PROSet installation. When the Welcome to the InstallShield
Installation.
3.2 Installing PROSet
The following sections describe four PROSet installation options:
•
•
•
•
Typical Installation
Custom Installation
Command Line Installation
Silent Installation
3.2.1 Typical Installation
1. In the Welcome… window, click Next.
2. Read the license agreement and select I accept the terms in the license agreement. Click Next.
3. Choose the Typical or Custom setup type by clicking an appropriate option. Click Next. (For a
4. Click Install to begin installation.
4
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
3.2.2 Custom Installation
Custom setup allows you to select additional software features to install. The following features can be
selected:
•
•
•
Single Sign On Feature Set – installs the Single Sign On (SSO) feature set, except the Pre-Logon
Connect feature, which must be installed separately (see next bullet point)
Pre-Logon Connect – installs the Pre-Logon connect feature to establish a wireless connection
prior to the user logging on to Windows
The following are options for command line installation, described in section 3.2.3.
o
o
q, qn – No user interface
qr – Reduced user interface
Note: Please refer to the Microsoft Windows Installer Guide for more options.
3.2.3 Command Line Installation
To install PROSet from the command line:
1. Open a command window.
2. Change the directory to the PROSet directory on the CD or the directory where you copied the
install.
3. Enter a command to start the installation. Command structure and options are described below.
For Microsoft Windows 2000 and Windows XP:
msiexec /i PROSet.msi <keys> <options>
<keys> - Specific keys to change the behavior of PROSet and to select feature components for
installation, further described in Section 3.2.3.
<options> - Standard options provided by Windows Installer. Most common is the silent install option,
further described in Section 3.2.2.
When using this method, the language detection made by PROSet.exe is suppressed. As a result,
installation screens will be shown in English.
3.2.4 Silent Installation
To install PROSet without installation prompts, use the Windows Installer silent installation option:
msiexec /i PROSet.msi <keys> /qn
To install PROSet with installation status messages, use the Windows Installer silent installation option:
msiexec /i PROSet.msi <keys> /qr
3.3 PROSet Features
The following keys can be used to set up PROSet features. They are mainly used in silent installation
mode.
Keys
Parameters
Representation
5
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Intel® PRO/Wireless 2100 Network Connection Software
, Rev. 1.1
Keys
Parameters
Representation
AVAIL_NETS=
0
1
0 – Checkbox is unchecked for “Display Available Networks when not
associated”.
1 – Checkbox is checked for “Display Available Networks when not
associated”.
MSZCFG=
0
1
0 disables Windows XP Zero Config.
1 is the default.
A synonym for the “WZC=” option.
NTFY_PMDSBL=
0
1
0 – Checkbox is unchecked for “Notify when disabling Profile Management
features”.
1 – Checkbox is checked for “Notify when disabling Profile Management
features”.
NTFY_WZC =
PLC
0
0 - Checkbox is unchecked for “Notify when Windows XP ZC is enabled”.
1 - Checkbox is checked for “Notify when Windows XP ZC is enabled”.
YES – installs and enables Pre-logon Connect feature.
NO – default
1
YES
NO
YES
NO
YES
NO
PTC
YES – installs software and enables Persistent Connect feature.
NO – default
SFS
YES – Installs SSO Feature Set.
Pre-Logon Connect and Persistent Connect are not enabled. The user can
enable Persistent Connect from System Wide Option. Pre-Logon Connect
feature will need to be enabled using Add/Remove Programs applet of the
Control Panel. This option is redundant when there is specified one of the
options: “PLC=YES” or “PTC=YES”
NO- default
SYSRESTART=
YES
NO
YES (default) reboot will happen when other conditions are met, such as
when PLC is installed or uninstalled.
NO, do not reboot, regardless of the circumstances.
0 Intel PROSet/Wireless Software sys-tray icon not launched after install.
1 is the default.
TRAYICON=
WZC=
0
1
0
1
0 – Disables the Windows XP Zero Config
1 – is the default.
A synonym for the “MSZCFG=” option.
6
Intel Customer Support
Download from Www.Somanuals.com. All Manuals Search And Download.
|