Steamline
Iron
Instruction Booklet
KI730/KI760/KI760P/KI780
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
1
19/01/10 3:40 PM
Contents
Kambrook Recommends
Safety First
p4
Your Kambrook Steamline Iron
Operating Instructions
How To Use Shot Of Steam
Care and Cleaning
p6
p7
p10
p12
p16
Warranty Details
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
3
19/01/10 3:40 PM
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Steamline Iron
• Carefully read all instructions before
operating the Kambrook Steamline
Iron for the first time and save for
future reference.
• To protect against electric shock, do
not immerse the iron, cord or plug in
water or any other liquid.
• Regularly inspect the supply cord,
plug and actual appliance for
any damage. If damage is found
in any way, or the iron has been
dropped, immediately cease
use of the appliance and return
the entire appliance to your
nearest authorised Kambrook
Service Centre for examination,
replacement or repair.
• Do not use the iron for anything
other than its intended use.
• Always turn the Variable
Temperature Control to minimum,
then switch off at the power outlet,
then unplug the appliance when
not in use.
• Allow the iron to cool completely
before storing in an upright position
on its heel.
• Do not touch hot surfaces. High
temperatures are generated during
use, which could cause burns.
Always use the handle and warn
others (especially children) of the
possible dangers of burns from
steam, hot water or hot soleplate,
especially when ironing vertically.
• Store the unit out of reach
of children.
• Do not leave the appliance
unattended when in use.
• The iron must be used and rested on
a stable surface
• When placing the iron on its heel,
ensure that the surface on which
the heel is placed is stable.
• The iron is not to be used if it has
been dropped, if there are visible
signs of damage or if it is leaking.
• Do not allow the iron to lay flat on
the soleplate when stored as water
may seep through the steam holes,
if the tank is not empty.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
4
19/01/10 3:40 PM
• Always test the iron on a small,
discreet part of the fabric to be
ironed to ensure the temperature is
not set too high.
• Always store the iron in the upright
position on its heel. Do not leave the
iron unattended while connected
or on an ironing board.
• Always switch off at the power
outlet, then unplug the appliance
from the outlet:
- Before filling with water or
emptying it.
- Before leaving it unattended.
- Before cleaning and maintenance,
unless otherwise specified in
this booklet.
• Do not use outdoors or
in bathrooms.
- Immediately after use.
• Do not store the iron with water in
the water tank.Always empty the
tank after use. Ensure the iron is cool
before storing or wrapping the cord
around the storage heel facility.
Important Safeguards For All Electrical
Appliances
• Fully unwind the power cord
• Any maintenance other than
before use.
cleaning should be performed
at an authorised Kambrook
Service Centre.
• Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
• The appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
• Children should be supervised to
ensure that they do not play with
the appliance.
• It is recommended to regularly
inspect the appliance.To avoid a
hazard do not use the appliance
if power cord, power plug or
appliance becomes damaged
in any way. Return the entire
• This appliance is for household use
only. Do not use this appliance for
anything other than its intended use.
Do not use in moving vehicles or
boats. Do not use outdoors. Misuse
may cause injury.
• The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection when
using electrical appliances. It is
advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
appliance to the nearest authorised
Kambrook Service Centre for
examination and/or repair.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
5
19/01/10 3:40 PM
Your Kambrook Steamline Iron
1. Shot of steam button: For an extra
burst of steam on thick fabric or
tough creases
2. Fine mist spray: To dampen fabric
especially when dry ironing at low
temperatures when steam isn’t
available (also assists in removing
stubborn creases).
11. Long textile cord with 360°
cord outlet for better reach
and more flexibility:
• 3 metre (KI760, KI760P and
KI780 only)
• 2.5 metre (KI730 only)
12. Heating indicator light: Illuminates
when the iron is heating to the
selected temperature
3. Steam control: Allows you to
select how much or how little
steam you require
Not Shown
•
•
Auto-Off protection (KI780 only): To
switch the iron off when it has been
left unattended
4. Water tank inlet: Large inlet for easy
filling of water tank
5. Fine mist spray nozzle
6. Self-clean function
7. 280ml easy to fill water tank
8. 2000W
Vertical shot of steam: Removes
creases and freshens hanging
curtains and clothes. Ideal for
delicate fabrics which require
steam only
9. Soleplate with full length button
•
•
•
Anti-drip system: Stops water
from dripping
Continuous steam: Removal of
creases throughout ironing time
Accessory: Water cup for filling
the iron
groove:
• Non-stick soleplate for easy gliding
over all fabric types (KI780, KI730)
• Ceramic soleplate for long lasting
durable performance (KI760,
KI760P)
10. Temperature control: Selection of
fabric temperatures from MIN (silk) to
MAX (linen)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
6
19/01/10 3:40 PM
Operating Instructions
Before First Use
NOTE: As an important part of
our quality control process,
your iron has been individually
tested. As a result, you may
notice a small amount of
condensation or water droplets
on the inside of the water tank.
There is no need for concern.
Remove any promotional material
from the iron.
Remove any sticker or protective
cover from the soleplate.When
operating the iron for the first time, iron
on an old piece of fabric to ensure
that the soleplate and water tank are
completely clean.
When the iron is used for the first time,
some vapour may emit.After a short
while however, this will cease.The
vapour is due to the initial heating of
the materials used in the iron. It is safe
and will not harm the performance of
the iron.
Table A
on label means: “This article cannot be ironed”
[e.g. chlorofibre, acrylic, elastodiene]
NOTE:
Label
Code
Kind of
Textile
Temperature
Control
Variable Steam
Control
[see garment
instruction]
[advised position]
synthetic
modacry
polypropylene
polyurethane
acetate
MIN
DRY
triacetate
matalized
cupro
plyamide [nylon]
polyester
modal
viscose [rayon]
silk
MIN STEAM
MAX STEAM
wool
cotton
linen
LINEN
MAX
7
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
7
19/01/10 3:40 PM
Operating Instructions
continued
Setting the Temperature
CAuTION: The iron
Before commencing ironing, first sort
the items to be ironed according to
incorporates a thermal
safety fuse to protect
the iron from over-
the International Textile Care Labelling
Code or by the type of fabric.
Iron fabrics that require the lowest
temperatures first.Work through to the
fabrics requiring higher temperatures.
Both the Temperature Control and
most items of laundry have markings
corresponding with this code
(see Table A).
Stand the iron on its heel and turn the
Temperature Control to MIN.
heating. However the
iron should not be left
unattended while it is
connected to the power
outlet. Special care
should always be taken
when there are children
in the home/vicinity of
the iron.
Plug the power cord into a 230V or
240V power outlet and switch on.
Select the temperature setting
required by rotating the
Temperature Control dial so that the
desired setting is aligned with the
Temperature Indicator.
The Heating Indicator light will
illuminate while the iron heats to the
selected temperature.
CAuTION: Never leave
the iron unattended
while it is connected
to an electrical outlet.
Special care should
always be taken when
there are children in
the vicinity.
Once the light has switched off, the
iron has reached the set temperature
and is ready for use.The light will cycle
on and off during use as the iron
maintains the temperature selected
on the Temperature Control.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
8
19/01/10 3:40 PM
Steam Ironing
IMpORTANT: If the iron is
set to a low temperature
on the Temperature
Control (i.e. synthetic
or silk) and also on any
of the steam control
settings, there may
be leakage from the
soleplate. This is due to
the iron temperature not
being high enough to
vaporise the water and
create steam.
When filling the iron with water, ensure
that the iron is unplugged. Set the
Steam Control to the DRY position and
holding the iron at an angle use the
water cup supplied to fill the water
tank. Never exceed the maximum
water level as indicated (MAX) on the
side of the water tank.
Tap water can be used in your
Kambrook Steamline iron unless it
is particularly hard, in which case
it is recommended that distilled or
demineralised water be used.
Therefore, ensure
that the steam
control is always set
to correspond with
the setting on the
temperature control
as seen in Table A (see
section ‘Setting the
Temperature’).
To Operate the
Steam Control
As per the indications on the
Temperature Control and in
Table A (See section ‘Setting the
Temperature’) steam ironing is
only possible at higher ironing
temperatures, indicated with Cotton/
Linen on the Temperature Control.
Plug the power into a 230V or 240V
power outlet and switch the power on.
Set the Temperature Control to the
required position within the steam
range and wait until the Heating
Indicator Light has gone out.
Set the Steam Control (on top of the
handle) to the required setting.
Your Kambrook iron is now ready for use.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
9
19/01/10 3:40 PM
How To use Shot Of Steam
The shot of steam provides an extra
burst of steam which is ideal for the
removal of stubborn creases and
wrinkles during STEAM or DRY ironing.
Turn the Temperature Control to the
hottest setting and wait until the
Select the required setting on the
temperature dial for the fabric
being ironed.
Once the temperature has been
reached, the heat indicator light will
turn off and the iron is ready for use.
heating indicator light goes out.Ensure
the Steam Control corresponds to the
setting on the Temperature Control.
Lift the iron slightly above the surface
of the fabric,press the Shot of Steam
button down firmly and release it
during ironing.An intense burst of
steam penetrates deep into the fabric.
Using the Fine Mist Spray
The fine mist spray can be used to
dampen difficult fabrics, dry areas,
woollen items and accidental creases.
Firmly press the spray button (located
on the handle of the iron) to produce
a fine spray of water ahead of
the iron.
The spray can also be used with
delicate fabrics (synthetic) which
are ironed at low temperatures and
therefore cannot be steam ironed.
NOTE: For optimal steam quality,
wait an interval of at least 4
seconds between presses of the
Shot of Steam button.
NOTE: If the spray function is
operated during dry ironing,
ensure that there is sufficient
water in the water tank. If
dry ironing for more than 20
minutes, the water tank should
be emptied to prevent over
heating any water present.
Vertical Steam Shot
The Vertical Steam Shot allows you to
use the iron for vertical applications.
This is especially useful for getting
wrinkles out of hanging garments,
curtains, wall hanging etc.
Hold the iron vertically, in front, a slight
distance from the item to be steamed
and press the Shot of Steam button.
Anti Drip System
The Kambrook Steamline iron is
equipped with an Anti-Drip System.
The iron will automatically close the
steam valve when the soleplate
temperature is too low to produce
steam.When this happens you will
hear a click sound. It is safe and will
not harm the performance of the iron.
CAuTION: Never use
the vertical steam shot
while clothes are on
the body or direct the
steam towards people.
This is the reason the fine mist spray
should be used when ironing delicate
fabrics at low temperatures.
Dry Ironing
Turn the steam selector to the
DRY position.
The steam valve will open once
the soleplate has reached the
temperature required to create steam.
This shuts off the steam flow should
there be any water in the tank.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 10
19/01/10 3:40 PM
Safety Auto-Off (KI780 Only)
CAuTION: safety
The Safety Auto Off feature is
designed to switch the iron off
if forgotten.
auto-off is designed
as a safety feature
only. Irons should not
be left switched on
deliberately while
unattended. If safety
auto off has activated
and no further ironing
is required, we
When the iron is left in the upright
position it will shut off in approximately
8 minutes, followed by six beeps.
recommend that the
iron is switched off
at the power outlet
and unplugged.
After Each Use
Fig. 1
Set the steam selector to the DRY
position and turn the Temperature
Control to MIN.
Switch the power off at the power
outlet and disconnect the power cord
from the power outlet.
When left in the ironing position it
will switch off in approximately 30
seconds, followed by six beeps.
Open the water filling cap and
(over a sink or bucket) invert the iron
to empty the remaining water from
the tank.
Stand the iron in an upright position
and allow to cool.
Fig. 2
Once the iron has shut itself off, the
indicator light will blink to indicate
that the iron has switched off.
To reactivate the iron, simply move
the iron.The heating indicator light will
switch on when the iron has reached
the temperature selected on the
temperature dial.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 11
19/01/10 3:40 PM
Care and Cleaning
To ensure your iron maintains optimum
performance it is recommended that
it be cleaned using the Self-Clean
function to remove scale or impurities.
• Set the steam selector to the
DRY position.
• Fill the water tank up to the
maximum level (MAX) with the
water cup supplied.
• Set the Temperature Control to MAX
(Linen) setting.
• Place the iron in the upright position,
insert the plug into the power outlet
and switch the iron on.
• Allow the iron to heat until the
heating indicator light turns off.
Repeat the Self Clean process if the
iron still contains a lot of impurities.
CAuTION: Only push
and hold the self clean
button when you want
to activate the self
cleaning function.
Do not push and hold
whilst ironing.
Boiling water and steam
will drip from the holes
in the soleplate during
the cleaning process.
Due caution and
attention should
be exercised.
• Switch the iron off at the power
outlet and remove the plug.
• Hold the iron horizontally over
the sink.
• Press and hold the SELF
CLEAN button.
Cleaning the Soleplate
and Exterior
Ensure that the iron is disconnected
from the power outlet.
To remove residue which may have
built up from certain fabric finishes,
clean the soleplate with a rough cloth
that has been soaked in a vinegar
and water solution. Dry thoroughly
with a soft cloth.
• Water will drip through the holes
in the soleplate. Move iron until
all water has dripped out of the
water tank.
NOTE: Once you have used the
Self-Clean function, it is normal
for some water to remain in the
water tank. This is due to the
Anti-Drip System preventing
the tank from being emptied
completely. This will not affect
the performance of the iron.
To clean the steam holes, simply
use a damp cloth to wipe away build
up of lint or starch from inside the
steam holes.
Wipe the outer housing with a soft,
damp clean cloth and polish with a
dry cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 12
19/01/10 3:40 PM
NOTE: Never use abrasives or
scouring pads to clean the
soleplate. Avoid hard contact
with metal objects. Do not
scratch or damage the surface
of the soleplate.
Do not use harsh or abrasive
cleaners as they may damage
the surface of the iron. Never
immerse the iron in water or
any other liquid.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 13
19/01/10 3:40 PM
Notes
14
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 14
19/01/10 3:40 PM
Notes
15
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd 15
19/01/10 3:40 PM
Kambrook 12 Month Replacement Warranty
In Australia, this Kambrook Replacement Warranty
The Kambrook Replacement Warranty does not
apply to any defect, deterioration, loss, injury or
damage occasioned by, or as a result of, misuse
or abuse, negligent handling or if the product has
been used other than in accordance with the
instructions.The Kambrook Replacement Warranty
excludes breakables such as glass and ceramic
items, consumable items and normal wear and
tear.
does not affect the mandatory statutory rights
implied under the Trade Practices Act 1974
and other similar State and Territory legislation
relating to the appliance. It applies in addition
to the conditions and warranties implied by that
legislation.
In New Zealand, this Kambrook Replacement
Warranty does not affect your mandatory statutory
rights implied under the Consumer Guarantees
Act 1993 in relation to the appliance. It applies in
This Kambrook Replacement Warranty is void if
there is evidence of the product being tampered
addition to the conditions and guarantees implied with by unauthorised persons.
by that legislation.
If the product includes one or a number of
This Kambrook Replacement Warranty is valid only accessories only the defective accessory or
in the country of purchase, but other statutory
warranties may still apply.
product will be replaced. Subject to your statutory
rights, in the event of Kambrook choosing
to replace the appliance, the Kambrook
Replacement Warranty will expire at the original
date, i.e. 12 months from the original date of
purchase.
This Warranty card and the purchase receipt for this
product are to be retained as proof of purchase
and must be presented if making a claim under
the Kambrook Replacement Warranty. Please note
that under any applicable statutory warranty you
In the event that you need some assistance
are not required to produce these documents, but with your Kambrook appliance, please contact
may be required to provide a proof of purchase.
our Customer Service Department on 1300 139
798 (Australia) or 09 271 3980 (New Zealand).
Alternatively, visit us on the website at
www.kambrook.com.au
Kambrook warrants the purchaser against defects
in workmanship and material for a period of 12
months domestic use from the date of purchase
(or 3 months commercial use).
Kambrook 12 Month Replacement Warranty
Your Purchase Record (Please Complete)
Attach a copy of the purchase receipt
here.
Date Of Purchase ________________________________
Model Number ___________________________________
Serial Number ____________________________________
Purchased From __________________________________
(Please don’t return purchase record
until you are making a claim)
Kambrook - New Zealand
Private Bag 94411
Botany, Manukau
Auckland 2141
New Zealand
Customer Service Line/Spare Parts
0800 273 845 or 09 271 3980
Kambrook - Australia
Building 2, Port Air Industrial Estate
1A Hale Street
Botany NSW 2019
Australia
Customer Service Line 1300 139 798
Customer Service Fax 1800 621 337
Customer Service Fax 0800 288 513
Due to continual improvement in design or otherwise, the product you
purchase may differ slightly from the illustration in this book. Issue A10
Download from Www.Somanuals.com. All Manuals Search And Download.
KI730_KI760_KI760P_KI780_IB_FA.indd
1
19/01/10 3:40 PM
|