JVC Security Camera VN H137U User Manual

SAFETY PRECAUTIONS  
FOR USA  
This device complies with Part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) This device may  
not cause harmful interference, and (2) this device must accept  
any interference received, including interference that may  
cause undesired operation.  
These are general IMPORTANT SAFEGUARDS and  
certain items may not apply to all appliances.  
HD IP CAMERA  
Instructions (Installation)  
IMPORTANT SAFEGUARDS  
VN-H57U  
VN-H37U  
VN-H137U  
INFORMATION (FOR CANADA)  
1. Read all of these instructions.  
2. Save these instructions for later use.  
RENSEIGNEMENT (POUR CANADA)  
This Class A digital apparatus complies with Canadian ICES-003.  
3. All warnings on the product and in the operating instructions  
should be adhered to.  
4. Unplug this appliance system from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
Cet appareil num rique de la Class A est conforme á la norme  
NMB-003 du Canada.  
5. Do not use attachments not recommended by the appliance  
manufacturer as they may cause hazards.  
<VN-H57U>  
<VN-H137U>  
6. Do not use this appliance near water - for example, near  
a bathtub, washbowl, kitchen sink, or laundry tub, in a wet  
basement, or near a swimming pool, etc.  
7. Do not place this appliance on an unstable  
cart, stand, or table. The appliance may  
Due to design modifications, data given in this instruction  
book are subject to possible change without prior notice.  
For Customer Use:  
Enter below the Model No. which is located  
on the body.  
WARNING  
TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN  
OR MOISTURE.  
fall, causing serious injury to a child  
or adult, and serious damage to the  
appliance. Use only with a cart or stand  
recommended by the manufacturer, or  
sold with the appliance. Wall or shelf  
mounting should follow the manufacturer’s  
instructions, and should use a mounting kit  
approved by the manufacturer.  
< VN-H37U>  
Thank you for purchasing this product.  
Before operating this unit, please read the instructions carefully  
to ensure the best possible performance.  
Retain this information for future reference.  
Model No.  
Serial No.  
AVERTISSEMENT  
POUR EVITER LES RISQUES D'INCENDIE OU  
D'ELECTROCUTION, NE PAS EXPOSER L'APPAREIL A  
L'HUMIDITE OU A LA PLUIE.  
An appliance and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may cause  
the appliance and cart combination to overturn.  
8. Slots and openings in the cabinet and the back or bottom are  
provided for ventilation, and to insure reliable operation of the  
appliance and to protect it from overheating, these openings  
must not be blocked or covered. The openings should never  
be blocked by placing the appliance on a bed, sofa, rug, or  
other similar surface. This appliance should never be placed  
near or over a radiator or heat register. This appliance should  
not be placed in a built-in installation such as a bookcase  
unless proper ventilation is provided.  
9. This appliance should be operated only from the type of power  
source indicated on the marking label. If you are not sure of  
the type of power supplied to your home, consult your dealer  
or local power company. For appliance designed to operate  
from battery power, refer to the operating instructions.  
10. For added protection for this product during a lightning storm,  
or when it is left unattended and unused for long periods of  
time, unplug it from the wall outlet and disconnect the antenna  
or cable system. This will prevent damage to the product due  
to lightning and power-line surges.  
11. Do not allow anything to rest on the power cord. Do not locate  
this appliance where the cord will be abused by persons  
walking on it.  
12. Follow all warnings and instructions marked on the appliance.  
13. Do not overload wall outlets and extension cords as this can  
result in fire or electric shock.  
14. Never push objects of any kind into this appliance through  
cabinet slots as they may touch dangerous voltage points  
or short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the appliance.  
15. Do not attempt to service this appliance yourself as opening  
or removing covers may expose you to dangerous voltage  
or other hazards. Refer all servicing to qualified service  
personnel.  
16. Unplug this appliance from the wall outlet and refer servicing to  
qualified service personnel under the following conditions:  
a. When the power cord or plug is damaged or frayed.  
b. If liquid has been spilled into the appliance.  
The standard camera installation procedure can be found on the back side of this page.  
FOR EUROPE  
WARNING  
This is a Class A product. In a domestic environment this  
product may cause radio interference in which case the  
user may be required to take adequate measures.  
© 2012 JVC KENWOOD Corporation  
LST1230-001D  
Safety Precautions  
Dear Customer  
This apparatus is in conformance with the valid European  
directives and standards regarding electromagnetic  
compatibility and electrical safety.  
European representative of JVC KENWOOD Corporation is:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
The power rating is AC 24 V, 50/60 Hz/PoE (VN-H57U) or PoE (VN-H37U/VN-H137U). Use the correct voltage.  
Always use the AC 24 V power source that is insulated from the primary power supply. (VN-H57U)  
A level of supplied power that exceeds the ratings may result in failures, smoke or fire. If the camera breaks  
down, turn off the power and contact our service center immediately.  
If a level of power that exceeds the ratings is supplied, the internal components may be damaged even if no  
abnormalities are observed in the appearance and/or operation of the camera. Contact our service center  
immediately to arrange for an inspection (charged separately).  
61145 Friedberg  
Germany  
Sehr geehrter Kunde, sehr geehrte Kundin, dieses Gerät  
stimmt mit den gültigen europäischen Richtlinien und Normen  
bezüglich elektromagnetischer Verträglichkeit und electrischer  
Sicherheit überein.  
Die europäische Vertretung für die JVC KENWOOD  
Corporation ist:  
JVC Technical Services Europe GmbH  
Postfach 10 05 04  
61145 Friedberg  
Attachments and Accessories  
Instructions.......................................................2  
CD-ROM...........................................................1  
WARRANTY CARD (For USA).........................1  
Deutschland  
Information for Users on Disposal of Old  
Equipment  
[European Union]  
Operating Precautions  
This symbol indicates that the electrical and  
electronic equipment should not be disposed as  
general household waste at its end-of-life.  
Instead, the product should be handed over to  
the applicable collection point for the recycling  
of electrical and electronic equipment for proper  
treatment, recovery and recycling in accordance with  
your national legislation.  
Storage and Operating Environment  
This camera has been designed for indoor use. If you  
use it outdoors, install a housing.  
Disclaimer  
The motion detection feature is not a feature to prevent  
theft or fire. Our company shall not be liable for any  
loss or damage resulting from the use of this feature.  
Do not install the camera in the following environments.  
c. If the appliance has been exposed to rain or water.  
d. If the appliance does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as improper adjustment  
of other controls may result in damage and will often require  
extensive work by a qualified technician to restore the  
appliance to normal operation.  
e. If the appliance has been dropped or the cabinet has been  
damaged.  
f. When the appliance exhibits a distinct change in performance  
- this indicates a need for service.  
We shall not be responsible for any loss or damage  
caused in the event of privacy invasion as a result of  
camera footage created by this product.  
Doing so may result in malfunctions or failure.  
• Hot or cold locations beyond ambient temperature  
range (-10 °C to 50 °C).  
By disposing of this product correctly, you will help  
Attention:  
to conserve natural resources and will help prevent  
This symbol  
potential negative effects on the environment and  
is only valid in  
Locations beyond the allowable operating humidity  
range (20 %RH to 90 %RH) (no condensation allowed).  
Maintenance  
Turn off the power before performing maintenance.  
Wipe using a soft cloth.  
human health which could otherwise be caused by  
the European  
inappropriate waste handling of this product. For  
Union.  
• Near equipment that emits strong magnetic fields,  
such as transformers or motors.  
• Near equipment that emits radio waves, such as  
transceivers and mobile phones.  
• Locations in which excessive dust or sand exist.  
• Locations that are subject to vibration.  
more information about collection point and recycling  
of this product, please contact your local municipal  
office, your household waste disposal service or the  
shop where you purchased the product. Penalties  
may be applicable for incorrect disposal of this  
waste, in accordance with national legislation.  
Wiping with thinner or benzene may melt or tarnish its  
surface. For tough stains, wipe using a cloth that has  
been dipped into a neutral detergent diluted with water.  
Following that, wipe with a dry cloth.  
17. When replacement parts are required, be sure the service  
technician has used replacement parts specified by the  
manufacturer that have the same characteristics as the original  
part. Unauthorized substitutions may result in fire, electric  
shock or other hazards.  
18. Upon completion of any service or repairs to this appliance,  
ask the service technician to perform routine safety checks to  
determine that the appliance is in safe operating condition.  
(Business users)  
Locations prone to moisture such as sides of windows.  
If you wish to dispose of this product, please visit our web  
back of the product.  
Saving Energy  
• Locations that may contain steam or oil, such as  
kitchens.  
• Locations that are subject to radiation emissions,  
X-rays or corrosive gases.  
• Locations where chemicals are used, such as  
swimming pools.  
Use of this camera and cables connected to this  
camera at locations where strong electrical or  
If the camera is not going to be used for a long period  
of time, turn off the power or the system for safety  
reasons and to conserve energy.  
[Other Countries outside the European Union]  
If you wish to dispose of this product, please do so in  
accordance with applicable national legislation or other  
rules in your country for the treatment of old electrical and  
electronic equipment.  
FOR USA AND CANADA  
Others  
This camera has a built-in AGC circuit. Setting AGC  
to "Mid" or "High" increases the sensitivity of a dark  
image, and the screen may appear grainy. This is not  
a malfunction.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
This installation should be made by a qualified service  
person and should conform to all local codes.  
magnetic waves are generated (e.g. near a radio, TV,  
transformer, monitor, etc.) may result in images being  
affected by noise interference or colors being changed.  
When this camera is used with the white balance set to  
"ATW" (Auto Tracking White Balance), the color tone  
of some objects may differ slightly from the actual color  
due to the principle of the automatic tracking white  
balance circuit. This is not a malfunction.  
This installation shall be in accordance with the National  
Electrical Code, ANSI/NFPA 70. The unit is to be powered  
by a Listed Class 2 power supply or using the PoE.  
The AC 24 V power supply should conform to the following:  
Class 2 only (For USA), Isolated power supply only (For  
Europe and other).  
Any Mention in this manual of Alarm inputs have not been  
evaluated by UL to be used for Burglar Alarm Functionality.  
Special technique is required when installing this product.  
Please refer to your dealer for installation.  
CAUTION: TO REDUCE THE RISK OF ELECTRICK  
SHOCK. DO NOT REMOVE COVER  
Do not install this camera at a location that traps heat.  
(OR BACK). NO USER-SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO  
QUALIFIED SERVICE PERSONNEL.  
This camera discharges heat from the surface of the  
main unit. Do not install at a location that may trap  
heat, such as near the walls.  
The electric shutter of this camera is set to "1/30" by  
factory default. For regions with a commercial power  
frequency of 50 Hz, switch to the Flickerless mode  
during use under fluorescent lights (excluding inverter  
lighting equipment) to prevent flickers.  
The lightning flash wish arrowhead symbol, within  
an equilateral triangle is intended to alert the  
user to the presence of uninsulated "dangerous  
voltage" within the product's enclosure that age"  
within the product's enclosure that may be of  
sufficient magnitude to constitute a risk of electric  
shock to persons.  
Handling Precautions  
Do not suspend yourself from this camera, shake it or  
hang objects over it.  
Applying excessive load may cause the camera to fall  
off and cause an accident.  
Do not stack devices on top of each other.  
Rating label is pasted at the bottom or top of the camera  
unit.  
When the electronic sensitivity enhancement feature  
is enabled, the screen may appear grainy and more  
white spots may appear because the sensitivity is  
increased. However, this is not a malfunction.  
The exclamation point within an equilateral  
triangle is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
JVC is not liable for any compensation if you drop the  
camera due to insecure mounting by not following the  
installation description. Pay careful attention during  
installation.  
Doing so may cause a malfunction or failure due to  
overheating or noise, or cause a fire.  
Do not block the vents.  
If the power supply voltage is momentarily cut off or  
reduced due to lightning or the power supply to the  
air conditioner being turned on, the image may be  
disrupted or noise interference may occur.  
When mounting this product to a ceiling or wall, select  
a location strong enough to support the weight of this  
camera. If the location is not strong enough to support  
the weight, be sure to reinforce the ceiling or wall before  
installation.  
The camera may drop if the mounting screws are not  
tightened securely. Check that the screws are tightened  
appropriately and securely.  
Do not install the camera near lighting fixtures of high  
temperature, such as spot lights. It might result in failure  
or fires.  
It should be noted that it may be unlawful to re-record  
pre-recorded tapes, records, or discs without the consent  
of the owner of copyright in the sound or video recording,  
broadcast or cable program and in any literary, dramatic  
musical, or artistic work embodied therein.  
Inadequate heat ventilation may cause this camera to  
malfunction. Be sure not to block the vents around the  
camera.  
Information for USA  
This device complies with part 15 of the FCC Rules. Changes  
or modifications not approved by JVC could void the user's  
authority to operate the equipment. This equipment has  
been tested and found to comply with the limits for a Class A  
digital device, pursuant to Part 15 of the FCC Rules. These  
limits are designed to provide reasonable protection against  
harmful interference when the equipment is operated in a  
commercial environment. This equipment generates, uses, and  
can radiate radio frequency energy and, if not installed and  
used in accordance with the instruction manual, may cause  
harmful interference to radio communications. Operation of  
this equipment in a residential area is likely to cause harmful  
interference in which case the user will be required to correct  
the interference at his own expense.  
When using multicast, make use of an IGMPv2-  
compliant network switch.  
Copyright Protection  
With the exception of the user being the copyright  
holder or when permission such as for duplication has  
been granted by the copyright holder, permission is  
required in principle to duplicate, modify or transmit  
copyrighted material.  
Some hubs/switches of products that are equipped  
with intelligent features may include a broadcast/  
multicast suppression function. If this function is  
enabled, viewing of multicast images on this camera  
may fail.  
Unauthorized duplication, modification or transmission  
of copyrighted material may constitute a copyright  
infringement, and the user may be liable to pay  
compensation for damages. When using copyrighted  
material, be sure to check the license agreement or  
the copyrighted material thoroughly.  
When the Easy Day and Night or Day and Night is set  
to "Auto", the image becomes black and white in dark  
locations. As the sensitivity level is increased in this  
case, the screen may appear grainy and more white  
spots may appear. When switching between color  
and black-and-white images, the brighter area on the  
screen is emphasized, which may reduce the visibility.  
However, this is not a malfunction.  
CAUTION  
The latest version  
CHANGES OR MODIFICATIONS NOT APPROVED BY JVC  
COULD VOID USER’S AUTHORITY TO OPERATE THE  
EQUIPMENT.  
Please visit V.NETWORKS web site to check the latest  
vnetworks/index.html  
When rights or rights holders are involved with regard  
to the targeted subject of duplication, permission may  
be required for shooting or using (processing) it. Be  
sure to check the licensing conditions thoroughly.  
It is recommended that shielded LAN cables be used  
to connect to this camera. The safety and reliability of  
this camera has been checked using shielded cables.  
Use of recorded materials without first gaining the prior  
consent of the author is forbidden under copyright law  
except in cases of personal use.  
Under halogen lamps, light bulbs and other light  
sources that emit strong infrared light, black objects  
may look almost purple in the recording. It is an inherent  
characteristic of this camera and not a defect. (VN-H137U)  
During viewing using the Built-in Viewer, the video  
and audio may appear out of sync. This is not a  
malfunction (VN-H57U).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Continued overleaf  
Adjust the field angle and focus  
Image Adjustment  
Turn on the power  
(VN-H57U/VN-H37U)  
After connections and installations are completed, turn  
on the power to the unit. When the camera is booting,  
the [STATUS] indicator lights up orange. It lights up  
green after booting.  
[FOCUS ASSIST] button  
Adjust the field angle and the focus while checking the  
actual image on the monitor.  
Note  
Before you touch this camera, be sure to touch the metal surface of the  
monitor terminal first in order to discharge static electricity.  
Otherwise, static electricity may cause the camera to malfunction.  
1 Shoot the subject and press the [FOCUS ASSIST]  
button.  
• The camera enters Focus Assist mode, and [STATUS] indicator  
flashes green and orange alternately.  
Image Adjustment  
(VN-H137U)  
Adjust the direction of the camera  
2 Adjust the focus of the lens.  
Direct the camera at the target.  
VN-H37U camera  
Adjust the field angle and the focus while checking the  
actual image on the monitor.  
Note  
1 Loosen the back focus setscrew using a cross slot screwdriver.  
2 Shoot the fine designs farther than the subject you are shooting.  
Do not hold the lens section when adjusting the direction of the camera.  
The lens section may be damaged if you apply force to it.  
Note  
3
Connect the camera to a computer, and open the Built-in Viewer.  
Before you touch this camera, be sure to touch the metal surface of the  
monitor terminal first in order to discharge static electricity.  
Otherwise, static electricity may cause the camera to malfunction.  
For details about computer settings and methods for connecting  
the camera to a computer, refer to “Instructions (IP Address  
Settings)”.  
VN-H57U  
4 Select “Lens Type” from the “Lens” page in “Advanced Settings”.  
• For details on the lens type, refer to “Instructions (Setting)” on  
the supplied CD-ROM.  
Adjust the field angle and focus  
1 Remove the lens cover.  
5 Adjust the back focus.  
Press the lens cover marking (either A or B) up and down, release  
either catch, and then release another catch from this camera.  
With a Fixed-Focus Lens  
• Set the focus ring of the lens to the position.  
• Rotate the back focusing ring to adjust the focus.  
Note  
Do not forcibly pull the lens cover. If you do so, the fall prevention  
sheet may be removed.  
When mounting the lens cover, be careful not to pinch the protection  
sheet.  
Remove the lens cover by pulling it straight, and exercise care not to  
hit the lens. If the lens is hit, it may be scratched by the lens cover.  
With a Zoom Lens  
• Zoom the lens to the tele position, and focus an image by  
rotating the focus ring of lens.  
• Zoom the lens to the wide position, and adjust the focus by  
rotating the back focusing ring.  
2 Adjust the direction of the camera.  
6 Tighten the back focus setscrews by turning them to securely fix  
them.  
Direct the camera at the target.  
[STATUS] indicator  
Focus ring of lens  
VN-H57U camera  
Note  
Do not hold the lens section when adjusting the direction of the  
camera. The lens section may be damaged if you apply force to it.  
1 Turn the lens focus ring to adjust the focus.  
2 When you finish adjustment, secure the lens focus.  
3 Adjust the field angle.  
3 Press the [FOCUS ASSIST] button to release the Focus Assist  
mode.  
Loosen the zoom ring setscrew, and adjust the image size by  
rotating the zoom ring to the right or left. After completing the  
adjustment, move the fastening screw toward the direction of the  
lens (direction of the subject), and tighten the screw accordingly.  
4
Connect the camera to a computer, and open the Built-in Viewer.  
For details about computer settings and methods for connecting  
the camera to a computer, refer to “Instructions (IP Address  
Settings)”.  
4 Adjust the focus.  
5 Select “Lens Type” from the “Lens” page in “Advanced Settings”.  
• For details on the lens type, refer to “Instructions (Setting)” on  
the supplied CD-ROM.  
VN-H37U  
1 Lift the focusing gear control, release the catch from position C  
and insert it into position D to disengage the gear.  
Back focusing ring  
2 Loosen the focusing ring setscrew, and focus the image by  
6 Select “Day Focus Adjust” from the “Focus” page in “Advanced  
Settings”.  
rotating the ring to the right or left.  
Focusing ring  
setscrew  
• The back focus position is automatically adjusted.  
Adjust the back focus position to finely adjust the focus.  
• For details on back focus, refer to “Instructions (Setting)” on  
the supplied CD-ROM.  
Note  
If you open the gear beyond position D, the gear shaft is released  
from the bearing (E in the figure) to prevent it from being damaged.  
In this case, insert the shaft into bearing E (the original position)  
again and use them.  
Note  
It may be difficult to acquire focus the following places.  
Too bright places.  
Finely adjust the focus  
Too dark places.  
Places where brightness always flickering; people are passing by  
– Places where there is little contrast  
– Places where there are repeating  
The focus position can be manually adjusted by using the Built-in  
Viewer installed on your computer connected to the camera.  
(“Instructions (Setting)”) Resort to this method if it is difficult to  
acquire focus automatically.  
[STATUS] indicator  
Focus ring of lens  
[FOCUS ASSIST] button  
If you have changed the lens after performing automatic focus  
adjustment, initialize the back focus position via the "Focus"  
page, and perform focus adjustment again from step 1.  
If you experience difficulty with automatic focusing, select  
"Manual Focus" from the "Focus" page, and manually adjust the  
focus to the optimal position.  
1 Press the [FOCUS ASSIST] button.  
• The camera enters Focus Assist mode, and [STATUS] indicator  
flashes green and orange alternately.  
• The image is sharpened with the opening of the aperture.  
When using a zoom lens, focus the lens, and then select "Manual  
Focus" to perform focus adjustment for the zoom range.  
2 Shoot the subject.  
3 Finely adjust the focus.  
Knob  
VN-H137U  
Return the catch to C from D in the diagram, and rotate the focus  
adjustment gear knob to adjust the focus to the optimum position.  
Catches  
Focus adjustment gear  
E
D
C
4 Fix the focusing ring.  
Hold and press the focus adjustment gear between your fingers  
in the arrow direction of the figure, and tighten screw of focus  
adjusting ring.  
Focusing ring  
5 Release the Focus Assist mode.  
• When you release the Focus Assist mode by pressing the  
[FOCUS ASSIST] button, the [STATUS] indicator lights in green.  
• Mount the lens cover.  
A
Zoom adjustment  
ring  
B
Mount the lens cover  
1 Mount the lens cover.  
Note  
Lens cover  
Mount the lens cover carefully to avoid hitting the lens. If the lens is  
hit, it may be scratched by the lens cover.  
Mount the lens cover securely.  
[STATUS]  
indicator  
2 Remove the protection sheet.  
Protection sheet  
Fall prevention sheet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Continued overleaf  
3
Cables  
Specifications  
The specifications and appearance of this unit are subject to change for purposes of improvement without prior notice.  
Connecting the power cable to AC 24 V source  
LAN cable  
*
(VN-H57U)  
• When connecting to a switching hub:  
Use a straight cable.  
• When connecting to a computer:  
Use a crossing cable.  
VN-H57U  
VN-H37U  
VN-H137U  
Conductor  
diameter (mm)  
1.0 mm dia 1.6 mm dia 2.0 mm dia  
Image sensor  
1/3-inch Square-Pixel Progressive Scan CMOS (elementary color filter)  
or more  
or more  
or more  
Approximately 2,120,000 pixels  
1944 (H)×1092 (V)  
Effective pixels  
Max cable  
distance (meters)  
(Reference value)  
A 100-meter or less length and Category-5 or higher  
grade STP (shielded) cable is recommended.  
90  
240  
370  
Lens mount  
CS mount  
Camera  
section  
Approved lens  
Refer to our catalog.  
Note  
Note  
(50 %,AGC High,1/30 s)  
Color: 0.3 lx (typ.)  
Easy Day and Night :  
0.25 lx (typ.)  
(F1.2, 50 % , AGC High, 1/30 s)  
Color: 0.3 lx (typ.)  
Black and White : 0.03 lx (typ.)  
The crossing cable may not be used for some computer  
models. Check the LAN specifications of the computer  
when you directly connect this unit to the computer.  
Minimum illuminance  
of subject  
For safety reasons, turn on the power only after  
confirming that all the connections are completed.  
Be sure to turn off the camera before connecting cables.  
If you use both the AC 24 V power cable and the PoE-  
based LAN cable simultaneously, the camera may fail.  
Always supply power using either method.  
75 Ω, 1.0 Vp-p  
NTSC or PAL (switch selectable)  
Alarm I/O cable (VN-H57U)  
• A 50-meter or less length shielded cable is  
recommended.  
Monitor output  
Audio input  
mini-jack (Φ3.5 stereo R ch),  
can connect to a microphone  
that has a plug-in power system  
Input  
Reference voltage  
DC2.47 V(typ.)  
Audio cable connection  
Connect the stereo mini jack cable (Φ 3.5).  
(VN-H57U)  
Impedance  
2.2 kΩ(typ.)  
Line OUT (200 Ω, Max 1.9 Vp-p)  
mini jack (Φ3.5 stereo L ch)  
Audio output  
Image compression  
format  
R channel (MIC IN) : Connect to a condenser microphone that has a plug-in power system.  
L channel (LINE OUT) : Connect to a speaker that has a built-in amp.  
Note  
JPEG, H.264 High Profile, H.264 Baseline Profile, MPEG-4  
1920 × 1080  
1280 × 960  
1280 × 720  
640 × 480  
640 × 360  
320 × 240  
Always connect an external mic to the R channel only. If you plug the mic jack directly into the [AUDIO IN/OUT]  
terminal, a loud noise may be generated.  
Frame size  
Network  
output  
Memo  
A shielded audio cable is recommended.  
Audio compression μ-Law (64 kbps), AD/DA 16  
formats  
* For the location to connect the audio cable, refer to [Cabling] (  
page 2).  
bits, Fs = 8 kHz, monaural  
RJ-45  
Network interface  
100BASE-TX/10BASE-T/FULL/HALF/Auto-negotiation enabled  
Alarm I/O cable connection  
(VN-H57U)  
No-voltage a contact input, PNP  
open collector input, low level,  
latch/momentary (500 msec or  
longer) (1 mA circuit current at  
low level, and 3.3 VDC applied  
voltage at high level)  
Alarm input  
Alarm output  
Alarm input  
Connect an infrared sensor, door sensor, metal  
sensor, a manual switch or other device.  
Connect an alarm device, indicator, lighting, buzzer or  
other device.  
To avoid noise entering the internal circuit, enter the • An alarm output signal is an open collector output.  
NPN open collector -output (12  
non-voltage contact signal in the Alarm IN terminal.  
• Do not supply voltage.  
• The alarm can be set to be activated during close  
contact (MAKE) or during open contact (BREAK)  
can be set from the menu.  
You can configure the menu to set the alarm to  
sound when contacts short circuit (MAKE) or  
when the contacts are open (BREAK). (Pressure  
resistance lower than 16V, 30 mA)  
• This terminal has different polarities. The output  
voltage at the positive terminal must always be  
higher than the output voltage at the negative  
terminal. Otherwise, the circuit may be damaged.  
Alarm output  
Alarm record  
VDC safe excitation voltage, and  
30 mA allowable sink current)  
16 MB  
Focal length  
f = 2.8 to 10.5 mm  
Maximum aperture  
ratio  
F1.2 (f = 2.8 mm) to F2.6  
(f = 10.5 mm)  
The alarm signal should last for at least 500 msec. If  
the alarm signal is short, it may not be recognized.  
Lens  
Aperture range  
Zoom ratio  
F1.2 to F360  
3.75 x  
Input conditions  
Output conditions  
• Connect non-voltage a contact or open collector  
output circuit  
(For details on how to set polarities, please refer to  
“Instructions (Settings)”.)  
Standards  
Compliant with IEEE802.3, IEEE802.3u and IEEE802.3af  
LAN  
standards  
• Equivalent to NPN open collector output  
(For details on how to set the output logic, please  
refer to “Instructions (Settings)”.)  
• Safe excitation voltage: DC16 V or lower  
• Allowable surge current: 30 mA  
• Momentary (100 ms to 5000 ms) output  
(For details on how to set the time, please refer to  
“Instructions (Settings)”.)  
Communication  
protocol  
TCP/IP, UDP/IP, FTP, ICMP, ARP, DHCP, SNTP, HTTP, SMTP, RTP, RTSP, IPv4, IPv6,  
DSCP, HTTPS, SNMP  
Power supply  
voltage  
AC24 V 50 Hz/60 Hz, or  
PoE(DC-48 V)  
• Low level terminal current below 1 mA  
• High level terminal current 3.3 V  
This  
PoE(DC-48 V)  
AC24 V 0.5 A, or PoE 150 mA  
Current consumption  
120 mA  
(7.2 W)  
camera  
Sensor example (1)  
General  
Ambient  
temperature  
-10 °C to 50 °C (Operation)  
0 °C to 40 °C (Recommended)  
DC3.3 V  
VCC  
Input 1 or  
Input 2  
Alarm device  
example  
Ambient humidity  
Mass  
20 %RH to 90 %RH (without condensation)  
R
This  
camera  
OUT  
Approx. 360 g  
Approx. 340 g  
Approx. 390 g  
DC12 V  
3.3 V 1 mA  
G
Output 1 or  
Output 2  
R
IN  
G
(Alarm input equivalent circuit)  
Sensor example (2)  
Relay switch or  
other devices  
VN-H57U External dimensions (unit: mm)  
G
G
1/4-20UNC  
OUT  
37  
(Alarm output equivalent circuit)  
Screw hole for the camera-mounting  
Note  
G
• Connect the G terminal cable of this camera to the  
GND of the alarm device.  
connecting  
* For  
the Alarm I/O cable, refer to [Cabling] (  
page 2).  
114  
55  
123.5  
VN-H37U External dimensions (unit: mm)  
114  
121  
55  
1/4-20UNC  
37  
Screw hole for the camera-mounting  
Troubleshooting  
Symptom  
Causes and Countermeasures  
Movement of network image is  
not smooth  
• If the monitor image output is turned ON, a lower frame rate is set for  
network images.  
VN-H137U External dimensions (unit: mm)  
• If you turned the monitor image output to OFF, set the frame rate  
again.(“Instructions (Setting)” - “Internet Explorer Setting” -  
“Encoding Page”)  
The image output may be turned Off on Internet Explorer.  
Check the monitor output setting.  
No monitor image is output.  
• Check the MIC connection.  
162  
170  
The external mic sound is not heard.  
55  
Is the audio setting turned off? (  
“Instructions (Setting)” - “Audio Page”)  
Is the focus adjustment gear engaged? Check the location of the catch. (VN-H137U)  
Make sure that the lens is compatible with a CS mount.(VN-H57U/VN-H37U)  
1/4-20UNC  
Screw hole for the camera-mounting  
85  
Lens is out of focus  
After initializing the back focus position(  
perform focus adjustment again. (VN-H57U)  
Rotate the back focusing ring to adjust the focus.(VN-H37U)  
“Instructions (Setting)” - “Focus Page”),  
LST1230-001D  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4

Ingersoll Rand Paint Sprayer 200G User Manual
Inter Tel Telephone 8524 User Manual
Invacare Mobility Aid Lightweight User Manual
Jenn Air Double Oven W27400 User Manual
JVC Flat Panel Television HR S7500E User Manual
JVC Flat Panel Television T 26X585 User Manual
Keys Fitness Fitness Equipment KF AH User Manual
KitchenAid Coffeemaker KSCX 3610 User Manual
Klipsch Speaker R 1650 CSM User Manual
Kobe Range Hoods Ventilation Hood CH8136SQ User Manual