Kobe Range Hoods Ventilation Hood CH8136SQ User Manual

KOBE Brand Range Hood  
Model No. CH8136SQ  
CH-181 SERIES – 11” HEIGHT  
INSTALLATION INSTRUCTIONS  
AND OPERATION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION -  
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY,  
OBSERVE THE FOLLOWING:  
1) Installation and electrical wiring must be done by qualified professionals and in accordance  
with all applicable codes and standards, including fire-rated construction.  
2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or  
other hidden utilities.  
3) Ducted fans must be vented to the outside.  
a) Before servicing or cleaning unit, open the light panel and SWITCH POWER OFF AT  
SERVICE PANEL.  
b) Clean fan, optional filter and grease laden surfaces frequently. To reduce the risk of fire  
and to disperse air properly, make sure to vent air outside. DO NOT vent exhaust air  
into wall spaces, attics, crawl spaces or garages.  
NOTE - This warranty is invalid without an authorized agent’s  
receipt or if unit is damaged due to misuse, poor  
installation, improper use, mistreatment, negligence or  
any other circumstances beyond the control of KOBE  
RANGE HOODS authorized agents. Any repair carried  
out without the supervision of KOBE RANGE HOODS  
authorized agents will automatically void the warranty.  
- KOBE RANGE HOODS will not be held responsible for  
any damages to personal property or real estate or any  
bodily injuries whether caused directly or indirectly by  
the range hood.  
WARNING – TO REDUCE THE RISK OF PERSONAL INJURY IN THE EVENT OF A RANGE  
TOP GREASE FIRE:  
Keep fan, filter, if any, and grease-laden surfaces clean.  
Always turn hood ON when cooking at high heat.  
Use high settings on cooking range ONLY when necessary. Heat the oil slowly on low to  
medium setting.  
Do not leave cooking range unattended when cooking.  
Always use cookware and utensils appropriate for the type and amount of food prepared.  
Use this unit only in the manner intended by the manufacturer.  
Before servicing, switch power off at service panel and lock service panel (if possible) to  
prevent power from switching on accidentally.  
Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan,  
safety screens, and oil containers.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
What to Do In The Event Of a Range Top Grease Fire  
-
SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray, and then turn off the  
burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If  
the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE  
DEPARTMENT or 911.  
- NEVER PICK UP A BURNING PAN – You may get burned.  
DO NOT USE WATER, including wet dishcloths or towels – a violent steam blast will result.  
-
- Use an extinguisher ONLY if:  
a) You have a Class A, B, C extinguisher and know how to operate it.  
b) The fire is small and contained in the area where it started.  
c) The fire departments have called.  
d) You can fight the fire with your back to an exit.  
What to Do If You Smell Gas  
-
-
-
Extinguish any open flame.  
Do not try to turn on the lights or any type of appliance.  
Open all doors and windows to disperse the gas. If you still smell gas, call the Gas  
Company and Fire Department right away.  
CAUTION  
1) For general ventilation use only. Do not use to exhaust hazardous or explosive materials  
and vapors.  
2) To reduce the risk of fire, use only metal ductwork.  
3) Follow the heating equipment manufacturer’s guideline and safety standards such as those  
published by the National Fire Protection Association (NFPA), and the American Society for  
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and code authorities.  
4) Activating any switch may cause ignition or an explosion.  
ELECTRICAL SHOCK HAZARD – Can result in serious injury or death.  
Disconnect appliance from electric power before servicing.  
If equipped, the fluorescent light bulb contains small amounts of mercury,  
which must be recycled or disposed of according to Local, State, and  
Federal Codes.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
(M ust keep all m aterial for returns or refunds)  
Range Hood Box  
{A} KOBE Range Hood with Two-Piece Duct Cover  
{B} Warranty Registration Card  
{C} Instructions Manual  
{D} Duct Cover Bracket  
{E} Hood-Mounting Bracket  
{F} Oil Containers (Round)  
{G} Oil Containers (Oval)  
{H} Installation Template  
{I} 7” Round Duct Adapter  
{J} Screws Package  
{A}  
{E}  
{H}  
***Attached to Hood  
{B}  
{C}  
{F}  
{I}  
***Attached to Hood  
{G}  
{J}  
{D}  
***Attached to Duct  
Cover Position Plate  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING  
Calculation before installation  
To calculate the length of the installation, please refer to Table 1. (All calculation is measure in  
inches.)  
TABLE 1  
A = Height of Floor to Ceiling  
B = Height of Floor to Counter Top  
(Standard: 36”)  
C = Preferred Height of Counter Top  
to Hood Bottom (Recommended  
27” to 30”)  
D = Height of Hood  
E = Height of Duct Cover [F – D]  
F = Height of the Hood Installation  
[A – (B+C)]  
SAFETY WARNING  
HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR PROTECTIVE GLOVES IF IT  
IS NECESSARY TO REMOVE ANY PARTS FOR INSTALLING, CLEANING OR  
SERVICING.  
Preparation before Installation  
NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE  
VENT OPENING.  
- Decide the location of venting pipe from the hood to the outside. Refer to Figure 1.  
- A straight, short venting run will allow the hood to perform more efficiently.  
- Try to avoid as many transitions, elbows, and long run as possible. This may reduce  
the performance of the hood.  
- Use duct tape to seal the joints between pipe sections.  
- Temporarily wire the hood to test for proper operation before installing.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
- If necessary, prepare back wall frame with cross framing lumber for secure installation.  
Using references on Table 1 and the measurements on page 12, decide the level of the  
lumber. Refer to Figure 2.  
- Peel protective film off the duct cover and the hood (if any).  
- Loosen hood-mounting brackets at the back of the hood, adjust brackets and tighten  
screws as shown in Figure 3.  
- If necessary to remove the rubber stand on the back of the hood, unscrew and discard.  
Refer to Figure 4.  
Figure 1  
Figure 2  
Attached  
Rubber Stand  
Figure 3  
Figure 4  
Hood Installation  
CAUTION: If required to move the cooking range to install the hood, turn OFF the power on an  
electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS  
RANGE.  
1.  
2.  
3.  
4.  
Using references on Table 1 and measurements on page 12, mark the leveling point for  
hood-mounting bracket on the wall. If necessary, use installation template (provided).  
Secure two mounting screws (not provided) on the wall leaving 1/8” away from the wall.  
Refer to Figure 5.  
Align hood-mounting bracket to the mounting screws on the wall and hook hood into  
place.  
Secure and tighten the mounting screws. CAUTION: MAKE SURE THE HOOD IS  
SECURE BEFORE RELEASING.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting  
Screws  
Figure 5  
Ductwork Installation  
5. Use 6” round pipe to connect the plastic exhaust on the hood to the ductwork above. Use  
duct tape to make all joints secure and air tight. Refer to Figure 6.  
6. For 7” round ductwork, attach the 7” round duct adapter (provided) to the 6” round plastic  
exhaust on the hood. Refer to Figure 7.  
7” Round  
Adapter  
6” Round  
Plastic Exhaust  
Figure 6  
Figure 7  
Wiring to Power Supply  
SAFETY WARNING  
RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY GROUNDED.  
MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN IN ACCORDANCE WITH ALL  
APPLICABLE NATIONAL AND LOCAL ELECTRICAL CODES. BEFORE CONNECTING  
WIRES, SWITCH POWER OFF AT SERVICE PANEL AND LOCK SERVICE PANEL TO  
PREVENT POWER FROM BEING SWITCHED ON ACCIDENTALLY.  
7. Connect three wires (black, white and green) to house wires and cap with wire  
connectors.  
8. Connect according to color: black to black, white to white, and green to green.  
9. Test the operation of the hood before moving on to the next step. Make sure power is  
supplied to the hood.  
Duct Cover Installation  
NOTE: BE CAREFUL WHEN USING ELECTRICAL SCREWDRIVER, DAMAGE TO THE  
HOOD MAY OCCUR.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
10. Using reference E from Table 1 and measurements on page 12, mark the leveling point  
for duct cover bracket.  
11. Secure the duct cover bracket to the wall with two screws (not provided). Make sure all  
screws are tightened. NOTE: Inner duct cover will cover the duct cover bracket.  
12. Adjust the duct cover length and secure with two (4x8 mm) screws (provided) as shown in  
Figure 8.  
13. Remove the two (4x14 mm) screws (provided) on the duct cover position plate.  
14. Slide the entire duct cover onto the hood. Refer to Figure 9.  
Figure 8  
Figure 9  
15. Place the edge of the inner duct cover behind the duct cover bracket on the wall.  
16. Secure the outer duct cover to the duct cover position plate with two (4x14 mm) screws  
(provided).  
Install Accessories  
17. If oil container (round) is detached, place the oil container (round) into keyhole under  
each safety screen. Turn clock-wise until firmly in place. Refer to Figure 10.  
18. Slide oil container (oval) into plastic slot behind each safety screen as shown in Figure 11.  
Figure 10  
Figure 11  
Final Assembly  
19. Turn power ON in control panel. Check all lights and fan operation.  
20. Make sure to leave this manual for the homeowner.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
This KOBE hood is equipped with two-switch control panel, two powerful centrifugal turbine  
impellers with safety screens, two bright 12-volt 20-watt halogen lights, and four oil containers.  
The two control switches are Light Control and Speed Control. The two control switches  
operate independently of each other. Refer to Figure 12.  
Figure 12  
Light Operation:  
1.  
2.  
Slide switch to  
Slide switch to  
in the Light Control Panel to turn light on.  
in the Light Control Panel to turn light off.  
Fan Operation:  
1.  
2.  
3.  
4.  
Slide switch to  
in the Speed Control panel for low speed.  
in the Speed Control panel for high speed.  
Slide switch to  
Slide switch to  
Slide switch to  
in the Speed Control panel for QuietMode™ speed.  
in the Speed Control panel to turn off the fan.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: NEVER PUT YOUR HAND INTO THE AREA HOUSING THE FAN WHILE THE  
FAN IS OPERATING.  
For the optimal level of operation, clean the range hood surface, safety screens, and oil  
containers regularly.  
To Clean Hood Surface  
CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS.  
*** Regular care will help preserve its fine appearance.  
1) Use only mild soap or detergent solutions. Dry up surfaces using soft cloth.  
2) If hood looks splotchy (stainless steel hood), use an orange base cleaner to clean the  
surface of the hood. Avoid cleaner to get on the control switches. Only spread a light  
coating over the surface of the hood and leave on for a few minutes (do not leave on too  
long or this may cause damage to hood finish). Use soft towel to wipe off the cleaning  
solution, gently rubs any stubborn spots. Use a slightly damp towel to get rid of any  
cleaning solution. Use dry soft towel to dry the hood.  
3) To bring the glow back into a stainless steel finish, use a stainless steel cleaner.  
4) DO NOT allow deposits to remain for long periods of time.  
5) DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the  
surface causing rust.  
6) DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain  
in contact with stainless steel for extended periods. Many of these compounds contain  
chemicals, which may be harmful. Rinse with water after exposure and wipe dry with a  
clean cloth.  
To Clean Oil Containers, Safety Screens and Impellers  
CAUTION: DRAIN OIL CONTAINER BEFORE OIL CAN OVERFLOW.  
1) Normal Cleaning  
-
Spray a mild degreaser into the fan and turn on high speed and. Liquid residue will  
accumulate in the oil container.  
2) Cleaning Oil Containers  
-
-
-
-
Remove the oil container (round) by turning counter-clockwise.  
Remove the oil container (oval) by sliding forward.  
Wash with warm soapy water. Dry completely before returning into place.  
Top rack dishwasher safe.  
3) Cleaning Safety Screens  
-
-
-
Remove the safety screen screw and slide the safety screen out.  
Wash with warm soapy water. Dry completely before returning into place.  
Top rack dishwasher safe.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Replace Light Bulb  
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.  
1) Make sure all control switches are off, and range hood is unplugged.  
2) Use a flat head screwdriver to pop out the protective covering as shown on Figure 13.  
3) Gently pull out the defective light bulb and discard. Light bulbs should be 12V 20W  
maximum. Refer to Figure 14. Push bulb securely into light socket.  
4) Replace protective cover.  
5) Plug in range hood.  
Figure 13  
Figure 14  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL / SIZE  
CH8136SQ / 36”  
COLOR  
# 304 Commercial Grade Stainless Steel  
VOLTAGE  
120V 60Hz  
NUMBER OF MOTORS  
DESIGN  
2
20-Gauge / Satin Finish  
FAN TYPE  
EXHAUST  
Twin Turbine Impeller  
6” Round  
7” Round Adapter (Included)  
CONTROLS  
Three Speed (QuietMode™, Low, High)  
HALOGEN LIGHTS  
12V 20W x 2  
HOOD DIMENSION (W x D x H)  
(CH8136SQ) 35-1/4” x 19-1/2” x 11”  
(CH81SDC) 8-1/4” x 8-7/8” x (14-1/8”~27-1/4”)  
DUCT COVER DIMENSION  
(W x D x H)  
OPTIONAL ACCESSORIES  
(W x D x H)  
1) Two-Piece Extension Duct Cover  
(CH81SDC) 8-1/4” x 8-7/8” x (14-1/8”~27-1/4”)  
2) Euro Style Steel Rack  
(CH81SR) 35-1/2” x 11-3/4” x 1/4”  
2) 36” Stainless Steel Back Panel  
(SSP36) 36” x 1/10” x 32”  
Net  
38.0  
Gross  
42.0  
WEIGHT (lbs)  
(CH8136SQ)  
SPEED  
Air Capacity (cfm)*  
Sone  
QuietMode™  
300  
Low  
510  
2.8  
High  
680  
4.5  
1.0*  
*In House Test Static Pressure “0”. One Sone is equivalent to the sound of a refrigerator at 40 decibels.  
**Specifications subject to change without notice.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
***Hood-Mounting Bracket  
***Duct Cover Bracket  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL NO.: CH8136SQ  
NO.  
1
2
3
4
5
6
7
8
DESCRIPTION  
Duct Cover  
MODEL /SIZE  
CH81SDC  
PART NO.  
90A-1-0001  
90A-2-0002  
90A-3-0003  
90A-4-0004  
90A-5-2005  
90A-5-1005  
90A-6-0006  
90A-7-0007  
90A-8-0008  
90A-9-0009  
90A-10-0010  
90A-11-0011  
90A-12-0012  
90A-13-0013  
90A-14-1014  
90A-14-2014  
90A-15-1015  
90A-15-2015  
90A-16-0016  
90A-17-0017  
90A-18-0018  
90A-19-0019  
90A-20-0020  
90A-21-0021  
90A-22-0022  
90A-23-0023  
90A-24-0024  
7” Round Adapter  
Duct Cover Position Plate  
Exhaust Duct Stand  
Side Trim (Right)  
Side Trim (Left)  
Front Trim  
Hood Casing  
Control Unit  
Halogen Light (12V 20W Max.)  
Wire Box  
Capacitor  
Center Position Panel  
Air Chamber  
Motor (Left)  
Motor (Right)  
Turbine Impeller (Left)  
Turbine Impeller (Right)  
Oil Tunnel  
Impeller Plastic Cover  
Safety Screen  
Oil Container (Round)  
Bottom Casing  
Oil Container (Oval)  
Transformer (Light)  
Duct Cover Bracket  
Hood-Mounting Bracket  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL NO.: CH8136SQ  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MODEL NO.: CH8136SQ  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. CAREFULLY INSPECT ALL ITEMS FOR DAMAGES BEFORE ACCEPTING  
DELIVERY. NOTE ANY DAMAGES ON THE FREIGHT BILL OR EXPRESS  
RECEIPT. REQUEST NAME AND SIGNATURE OF THE CARRIER’S AGENT AND  
KEEP COPY TO SUPPORT YOUR CLAIM.  
Upon acceptance of items, owner assumes responsibility for its safe arrival. Damages  
should be reported to carrier and a claim filed. Failure to do this could result in the  
carrier refusing to honor your claim. The carrier will furnish you with necessary forms  
for filing a claim.  
DAMAGES CAUSED DURING TRANSIT ARE NOT COVERED UNDER OUR  
WARRANTY.  
2. PLEASE INSPECT CONTENTS OF PACKAGE (S) CAREFULLY UPON RECEIVING!  
We must be notified in writing of any damages and/or missing parts within the allocated  
days upon receipt of package(s). Contact your local KOBE dealer or distributor or call  
KOBE for the time limit.  
CLAIMS WILL NOT BE ACCEPTED AFTER THE ALLOCATED DAYS.  
NOTE: ITEMS WERE THOROUGHLY TESTED AND CAREFULLY PACKED IN OUR  
FACTORY.  
3. Products must be returned in good working condition with ALL original parts and  
documentation packed in ALL original cartons, fillers and shipping cartons. A restocking  
fee of 25% will be charged for all approved return(s).  
EXCHANGES OR RETURNS MAY NOT BE ACCEPTED IF ANY PACKAGING IS  
MISSING.  
4. MAKE SURE TO INSPECT THE HOOD FOR DAMAGES AND DEFECTS BEFORE  
INSTALLATION. Appearance flaws of the hood found after installation and not  
affecting hood performance is not covered under our warranty for returns or exchanges.  
Service visits not covered under warranty will carry a service charge.  
A) Before Installation: Return for exchange or refund (please see above for  
acceptable returns).  
B) After Installation: NO exchange or refund.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY CERTIFICATE  
KOBE Range Hoods, Inc. warrants all products manufactured or supplied by it to be free from  
defects in workmanship and materials. Its obligations pursuant to this warranty are limited to a  
period of two years from the date of purchase and to the repair or replacement at its option and  
subject to the terms and conditions stated below, of any component part, which its examination  
shall disclose to be so defective.  
TWO-YEAR WARRANTY SERVICE PERIOD  
Any covered failure occurring within two years of original purchase arising from defective  
workmanship or material in manufacture will be repaired (or at our option the unit will be  
replaced) free of charge by an authorized KOBE Range Hoods Agent or KOBE Range Hoods  
as applicable. Keep proof of purchase (or original invoice) handy for inspection.  
If the range hood is sold by the original purchaser during the warranty period the new owner is  
protected until expiration of the original purchaser’s warranty.  
CONDITIONS  
The following conditions apply only in relation to the warranty expressly given in this certificate.  
1) This warranty applies only:  
a) within U.S.A. and Canada.  
b) to range hoods used for PRIVATE SINGLE FAMILY USE (if used for COMMERCIAL or  
MULTIPLE FAMILY USE or other purposes, warranty will be voided).  
2) Repair of any fault to be provided under this warranty shall not be provided:  
a) if the identification number attached to the range hood has been altered, rendered  
illegible or removed;  
b) if notice of the defect has not been given within the period applicable;  
c) for failure of light bulbs;  
d) for physical damage;  
e) for surfaces damaged by use of improper chemical cleaning agents;  
f) if the appliance has been:  
i) subject to misuse, abuse, negligence, accident, incorrect installation or failure to  
follow the operating instructions;  
ii) connected to improper, inadequate or faulty electricity service or exhaust ducts or  
flues or operated using incorrect or contaminated lubricants;  
iii) installed, maintained or operated otherwise than in accordance with the instructions  
furnished by KOBE Range Hoods including the improper use of detergents,  
bleaches, or cleaners.  
g) for damage to range hood during transit, delivery, installation or removal;  
h) for damage by or resulting from attempted repairs conducted by anyone other than our  
Authorized Service Agent.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3) The purchaser shall be responsible for any expenses involved in making the range hood  
readily accessible for servicing and where the range hood is installed outside the main  
sales territory of the retailer or service territory of the nearest approved KOBE Range  
Hoods Agent as applicable, for any traveling expenses and any costs of transporting the  
range hood or parts thereof to and from the dealer or Service Agent  
4) The purchaser must produce proof of purchase together with this warranty certificate when  
making the claim.  
5) Damages caused during shipment are not covered under our warranty.  
CONSEQUENTIAL DAMAGE  
The warrantor is not responsible for any consequential damage. SOME STATES DO NOT  
ALLOW THE EXCLUSION OF CONSEQUENTIAL DAMAGE SO THE ABOVE EXCLUSION  
MAY NOT APPLY TO YOU.  
IMPLIED WARRANTIES/STATE LAW  
Any implied warranties, including the implied warranty of merchantability and fitness for  
purpose, imposed on the sale by the laws of the state of sale are limited to two year from the  
date of original purchase. Some states do not allow limitations on the duration of implied  
warranties. This warranty gives you specific legal rights, and may also have rights, which vary  
from state to state.  
SERVICE  
For service contact:  
KOBE Range Hoods  
4934 Walnut Grove Avenue  
Suite 202  
San Gabriel, CA 91776  
U.S.A  
Tel: (626) 309-1356 Fax: (626) 309-1366  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Register Your Product!  
Any covered failure occurring within two years of original purchase arising from defective  
workmanship or material in manufacture will be repaired or at our option the unit will be  
replaced free of charge by an authorized KOBE Range Hoods Agent or KOBE Range  
Hoods as applicable. Keep proof of purchase (original invoice) handy for inspection.  
If the range hood is sold by the original purchaser during the warranty period the new  
owner is protected until expiration of the original purchaser’s warranty. See warranty  
section for complete warranty coverage information.  
This appliance has been manufactured, tested, and inspected to the standards required by  
KOBE Range Hoods.  
PLEASE MAIL IN YOUR WARRANTY REGISTRATION CARD AND A COPY OF  
RECEIPT TO:  
KOBE Range Hoods, Inc.  
4934 Walnut Grove Avenue  
Suite 202  
San Gabriel, CA 91776  
RECORD THE FOLLOWING INFORMATION FOR YOUR RECORD:  
Model No. ________________________  
Serial No. ________________________  
Purchased Date  
Purchased From:  
_____/_____/_____  
______________________________  
______________________________  
______________________________  
IMPORTANT: PLEASE KEEP A COPY OF YOUR SALE RECEIPT OR INVOICE HANDY  
WHEN REQUESTING FOR SERVICE.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Ingersoll Rand Camera Accessories 636072 User Manual
Insignia Flat Panel Television NS 37L760A12 User Manual
Karcher Pressure Washer G2600XC User Manual
Kathrein Car Satellite TV System UFC 662sw User Manual
Kenwood Blender FP210 User Manual
Kenwood Universal Remote Preset Remote Control User Manual
Keys Fitness Home Gym KF RC User Manual
KitchenAid Toaster KMT211 User Manual
Kompernass Toaster KH 1909 User Manual
Korg Recording Equipment AmkII User Manual