JVC Laser Level HR P111EE User Manual

VIDEO CASSETTE RECORDER  
КАССЕТНЫЙ ВИДЕОПЛЕЙЕР  
ODTWARZACZ KASET VIDEO  
KAZETOVÝ VIDEOREKORDĒR  
TUNER NÉLKÜLI VIDEOMAGNÓ  
-
HR P111EE  
OPERATE STANDBY  
SCENE  
FINDER  
NTSC  
VIDEO  
IN  
AUDIO  
SP/LP/EP  
B.E.S.T.  
ON PAL TV  
NTSC3.58  
NTSC4.43  
B.E.S.T.  
LP/EP  
PAL NTSC  
VIDEO CASSETTE  
PLAYER  
HR-P111EE  
PAL NTSC  
INSTRUCTIONS  
РУКОВОДСТВОПОЭКСПЛУАТАЦИИ  
POKYNY  
INSTRUKCJA  
HASZNÁLATI ÚTMUTATÓ  
PU30425-1927  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and terminals  
Front panel  
1
2
345  
OPERATE STANDBY  
SCENE  
FINDER  
NTSC  
ON PAL TV  
VIDEO  
IN  
AUDIO  
SP/LP/EP  
B.E.S.T.  
NTSC3.58  
NTSC4.43  
B.E.S.T.  
LP/EP  
PAL NTSC  
VIDEO CASSETTE  
PLAYER  
HR-P111EE  
% $  
# "! 9 876  
1 OPERATE button  
! Colour System Output switch  
To turn the power on and off (standby mode).  
Select to watch an NTSC tape.  
2 Cassette loading slot  
@ Mode indicators  
Load the video cassette here.  
OPERATE indicator  
Lights when the power turns on.  
Blinks while a cassette is ejected.  
3 Rewind 1 button  
Torewindthevideotapeandtostartreverseshuttlesearch  
playback mode.  
STANDBY/Rewind1indicator  
Lights when the power turns off (Standby mode).  
Blinks during rewind mode.  
Blinks slowly during rewind power off mode.  
4 Play # button  
To start playback.  
Play3/Fastforward¡indicator  
Lights during playback mode.  
Blinks during fast forward mode.  
Blinks slowly during repeat playback mode.  
5 Fast forward ¡ button  
To fast forward the video tape and to start forward shuttle  
search playback mode.  
B.E.S.T. PICTURE indicator  
Lights when the B.E.S.T. picture is on.  
LP/EP indicator  
Lights the tape speed is LP(PAL) or EP(NTSC) mode.  
6 B.E.S.T. button  
To set the B.E.S.T. system on.  
7 Stop/Eject § button  
Recordindicator  
To stop playback and to eject the video tape.  
Lights during recording mode.  
Blinks during recording pause mode.  
8 Record button  
To start recording.  
# SP/LP/EP button  
To select the recording tape speed.  
9 SCENE FINDER button  
To start the scene finder.  
$ AUDIO/VIDEO IN terminals  
Connectcablescomingfromtheoutputterminalsofanother  
VCR or a camcorder.  
0 Remote sensor window  
For remote control operation.  
Rear panel  
1 AC power cord  
2 RF channel adjustment screw  
3 RF. OUT terminal  
4 AUDIO/VIDEO IN terminals  
5 AUDIO/VIDEO OUT terminals  
6 ANT. IN terminal  
1
4 5  
2 3  
10-  
40  
32  
IN  
OUT  
RF OUT  
AUDIO  
VIDEO  
K
G
ANT.  
IN  
1-  
7 TV system switch  
7 6  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless remote control  
When using the remote control for operation of the video  
cassette player, make sure that it is pointed at the remote  
sensor window.  
You can also use the player’s remote control to operate a JVC  
television.  
OPERATE STANDBY  
SCENE  
FINDER  
NTSC  
VIDEO  
IN  
AUDIO  
SP/LP/EP  
B.E.S.T.  
ON PAL TV  
NTSC3.58  
NTSC4.43  
B.E.S.T.  
LP/EP  
PAL NTSC  
VIDEO CASSETTE  
PLAYER  
HR-P111EE  
1 Transmitting window  
2 TV channel –/+ buttons  
3 TV VOLUME –/+ buttons  
1
TV  
+
-
-
TVCH  
OPERATE  
4 TV/VIDEO (Player) button  
2
3
Not function  
9
!
VOLUME  
+
TV/VIDEO  
5 Digital AUTO TRACKING button  
To cancel the Auto tracking mode.  
VIDEO  
6 Rewind 1 + button  
TV/VIDEO  
AUTO  
( +  
[
OPERATE  
To rewind the video tape. Also to start reverse shuttle  
search playback.  
4
5
6
7
8
"
#
$
%
&
-
TRACKING  
+
7 Play 3 button  
+
(
-
To start playback.  
L
J
8 Record button  
Press the Record and Play 3 buttons together, to start  
recording.  
9 OPERATE (TV) button  
REMOTE CONTROL UNIT  
To turn the TV power on and off.  
0 TV/VIDEO (TV) button  
To switch TV between TV and VIDEO (or AV).  
! OPERATE (Player) button  
To turn the power on and off (standby mode).  
@ TRACKING –/+ buttons  
To adjust tracking during playback.  
# Fast forward ¡ Z button  
To fast forward the video tape. Also to start forward shuttle  
search playback.  
$ Pause 8 button  
To freeze the picture during playback. Also to engage the  
recording pause mode.  
% Stop 7button  
To stop playback.  
The maximum operating distance of the remote control is  
about 8 m.  
Installing batteries  
Slide the battery compartment cover upward and  
insert two AA, R6, UM-3 or equivalent size batteries,  
observing the correct + and – polarities (refer to the  
illustration).  
1
Replace the battery compartment cover.  
2
1
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections  
Make sure that the power to the video cassette player and TV  
is off before making the following connections.  
Connection A  
10-  
40  
32  
IN  
OUT  
RF OUT  
AUDIO  
VIDEO  
K
G
ANT.  
IN  
1-  
Connection B  
Note:  
If you put a TV set directly on this VCP or install it too close to  
a TV set, noise may occur. If this noise occurs, separate the  
VCP and the TV set.  
Connection A (basic)  
Connection B  
In order to use the video cassette player it must be connected  
between the antenna and the TV.  
For connection of a TV that has VIDEO/AUDIO IN/OUT termi-  
nals. This connection is necessary to record TV programmes.  
UseRCAtypepinconnectioncords(availablefromaudio/video  
stores) for connection. This connection is in addition to connec-  
tion A.  
Connect your TV antenna cable to the video cassette  
player’s ANT. IN terminal.  
1
Connect one end of the provided RF antenna cable to  
Follow steps 1 and 2 of “Connection A”.  
1
2
the video cassette player’s RF. OUT terminal and the  
other end to the TV’s antenna terminal.  
Connect the TV’s VIDEO OUT and AUDIO OUT termi-  
nals to the video cassette player’s VIDEO IN and AU-  
DIO IN terminals.  
2
Connect the power cord to your household AC outlet.  
3
Connect the TV’s VIDEO IN and AUDIO IN terminals to  
the VCP’s VIDEO OUT and AUDIO OUT terminals.  
3
Connect the power cord to your household AC outlet.  
4
TV system  
The TV system switch should be set as follows.  
K position: Set to this position for K system areas (East-  
ern European countries).  
G position: Set to this position for G system areas (West-  
ern European countries for example).  
K
G
Note:  
When connection B is used to connect the TV and video  
cassette player, setting the TV system switch is not  
necessary.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the video channel The video cassette  
To watch videos on your TV, it must be set to the same UHF  
channel as the video cassette player. This channel is used as  
the video channel.  
Inserting a cassette  
This video cassette player has been preset to UHF channel 36.  
Note:  
OPERATE ST
SCENE  
FINDER  
When you have connected the VIDEO/AUDIO OUT termi-  
nals of this video cassette player to your TV’s video/audio in  
terminals (connection B of the “Connections” section), set-  
ting the video channel is not necessary. In this case simply  
set the TV’s TV/VCR switch to VCR.  
NTSC  
VIDEO  
IN  
AUDIO  
SP/LP/EP  
B.E.S.T.  
ON PAL TV  
NTSC3.58  
NTSC4.43  
B.E.S.T.  
PAL NTSC  
VIDEO CASSETTE  
PLAYER  
HR-P111EE  
Turn the video cassette player’s power on and load a  
pre-recorded video tape.  
1
E  
R  
VIDEO  
IN  
AUDIO  
B.E.S.T.  
PAL NTSC  
VIDEO CASSETTE  
PLAYER  
Turn on the TV and set it to UHF channel 36.  
HR-P111EE  
2
If UHF channel 36 is being used for broadcasting in  
your area:  
AdjusttheTV’schannelselectoralittleatatimeuntiltheTV  
screen is blank (set it towards a higher or lower channel).  
Adjust the RF channel adjustment screw on the rear panel  
of the video cassette player a little at a time until the  
playback picture appears on the TV screen.  
7 Insert the cassette as shown and push it gently into the  
video cassette player.  
Thevideocassetteplayerwillbeturnedonautomaticallyand  
the cassette will be loaded.  
7 Press the Stop/Eject § button to eject a cassette.  
During playback or recording, press the § button twice  
(once to stop the tape and once more to eject it).  
40  
Higher channel  
32  
Notes:  
If the cassette’s safety tab has been removed, playback will  
start automatically when the cassette is inserted.  
A cassette can also be ejected when the power is off.  
The OPERATE indicator blinks while the cassette is ejected.  
Lower channel  
Special note on Video Cassettes  
If the TV’s channel selector was set to a higher channel  
than channel 36, turn the RF channel adjustment screw  
to the right and vice versa.  
Topreventaccidentalrecordingonarecordedcassette,remove  
its safety tab. To record on it later, cover the hole with adhesive  
tape.  
Adjust the TV picture with the TV’s tuning controls.  
3
Using the TV while the video cas-  
sette player is connected  
Safety tab  
To watch a normal TV broadcast, select a TV station with  
the TV’s channel selector.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback  
NTSC, PAL and MESECAM video tapes can be played back on  
this video cassette player. Refer to the “Colour system output  
mode selection” section for details.  
NTSC Playback on PAL TV  
The vertical size of the playback picture will shrink and some  
picture “noise” may appear on the screen.  
The playback picture may roll. In this case adjust the picture  
with the TV’s vertical hold knob (with some TV’s this adjust-  
ment may not be possible).  
Before proceeding:  
The colour of the playback picture may differ from the  
Turn on the power of the TV and video cassette player.  
Make sure that the TV is set to the video channel or that the  
TV’s TV/VIDEO switch is set to VIDEO (refer to the “Setting  
the video channel” section for details).  
original.  
In the forward/reverse shuttle search or still modes there  
may be no colour depending on the TV and video cassette  
player combination.  
Colour system output mode selec-  
tion  
TV  
+
-
-
TVCH  
OPERATE  
TV/VIDEO  
1
2
VOLUME  
+
To watch an NTSC tape, it will be necessary to select one of the  
following output modes.  
VIDEO  
TV/VIDEO  
OPERATE  
AUTO  
-
TRACKING  
+
Selecting the NTSC PLAYBACK ON PAL TV mode  
Select this mode to watch NTSC tapes on a PAL system TV.  
OPERATE STANDBY  
SCENE  
FINDER  
NTSC  
AUDIO  
SP/LP/EP  
B.E.S.T.  
ON PAL TV  
NTSC3.58  
NTSC4.43  
B.E.S.T.  
LP/EP  
PAL NTSC  
(
+
+
(
-
2
[
L
J
NTSC  
ON PAL TV  
REMOTE CONTROL UNIT  
NTSC3.58  
NTSC4.43  
Load a pre-recorded cassette.  
If the safety tab on the cassette is removed, playback will  
start automatically.  
Selecting the NTSC 3.58 mode  
Select this mode to watch NTSC tapes on a NTSC system TV.  
1
2
Press the Play 3 button to start playback.  
NTSC  
ON PAL TV  
NTSC3.58  
NTSC4.43  
7 Press the Stop/Eject§ button or the remote control’s  
Stop 7 button to stop playback.  
Selecting the NTSC 4.43 mode  
Select this mode to watch NTSC tapes on a multi-system TV  
(that has an NTSC 4.43 setting).  
To fast forward or rewind the tape:  
7 From the stop mode, press the Fast forward ¡ or  
Rewind 1 button.  
Select NTSC 4.43 to record NTSC 4.43 signal.  
NTSC  
ON PAL TV  
NTSC3.58  
NTSC4.43  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback features  
Slow motion playback  
B.E.S.T. picture system  
Slow motion playback is 1/6 of the normal playback speed. The  
sound will be cut during slow motion playback.  
The B.E.S.T. (Biconditional Equalized Signal Tracking) system  
checks the condition of the tape in use during recording and  
playback, and compensates to provide the highest-possible  
recording and play back pictures.  
During playback:  
Press the Pause 8 button for 2 seconds.  
Press the B.E.S.T. button.  
The B.E.S.T indicator will light.  
1
1
7 Press the Play3 button to return to the normal playback  
7 Press the B.E.S.T. button to cancel this feature.  
speed.  
Notes:  
Notes:  
The B.E.S.T. system works for SP, LP and EP modes only  
after a tape has been inserted record mode is first initiated.  
It does not work during recording.  
Once the cassette is ejected, the B.E.S.T. data is cancelled.  
Since the B.E.S.T. system works before recording actually  
starts, there is a delay of approximately 7 seconds after the  
Record and Play 3 buttons on the remote control are  
pressed, or the Recordbutton on the video cassette player  
is pressed.  
If the picture shakes during the slow mode, use the manual  
tracking +/– buttons to correct the picture.  
There will be some picture disturbance and loss of colour  
during slow motion playback.  
After the picture has been frozen for approx. 5 minutes, the  
still mode will disengage to protect the video tape.  
Still picture and frame advance  
When watching a tape recorded with “B.E.S.T.” set to on , it  
is recommended that you leave B.E.S.T. on during playback  
as well.  
Use this feature to freeze the playback picture and to advance  
one frame at a time. The sound will be cut during this mode.  
The video cassette player adjusts the playback picture quality  
based on the quality of the tape in use.  
During playback:  
Scene finder  
Press the Pause 8 button.  
1
The picture will be frozen.  
This function helps you check contents of unlabeled recorded  
tapes at the touch of a signal button.  
PressthePause8buttonrepeatedlytoadvanceframes.  
2
Eachtimethebuttonispressedthestillpicturewilladvance  
Anytime except during Record:  
one frame.  
Press the SCENE FINDER button.  
7 Press the Play 3 button to resume normal playback.  
1
Notes:  
7 The video cassette player starts high-speed forward search  
for 30 seconds and then fast-forwards 10 minutes on the  
tape. This will be repeated until the end of the tape is reached.  
7 To start scene finder in the reverse direction, press the  
SCENEFINDERbuttonandthentheRewind1 buttonwithin  
2 seconds. It will be repeated until the beginning of the tape.  
7 During scene finder high-speed search, you can also hear  
the tape sound. During fast forward (or rewind), you will hear  
the current TV sound instead.  
If the picture shakes during the still mode, use the manual  
tracking +/– buttons to correct the picture.  
After the picture has been frozen for approx. 5 minutes, the  
still mode will disengage to protect the video tape.  
Shuttle search playback  
Use this feature during playback to visually locate any point on  
arecordedcassette. Thesoundwillbecutduringshuttlesearch  
operation.  
Press the Stop 7 button to stop scene finder.  
2
During playback:  
Repeat playback  
Press the Fast forward ¡ or Rewind 1 button to  
1
engage shuttle search forward or reverse.  
Use this feature to repeat playback of a cassette 20 times.  
7 Press the Play 3 button to resume normal playback.  
During playback:  
Notes:  
Press the Play 3 button for more than 5 seconds.  
Whenthevideocassetteplayerisinthestopmode,pressthe  
Play 3 button to start playback before engaging the shuttle  
search mode.  
1
The Play indicator will blink slowly and playback of the  
cassette will repeat 20 times automatically.  
Forshortsearches,keeptheFastforward¡orRewind 1  
button pressed for more than 2 seconds. When released,  
normal playback will continue.  
Press the Stop 7 button to stop repeat playback.  
2
Tape playback will be stopped and the repeat playback  
mode will be cancelled.  
Disturbances in the shuttle search picture are normal and do  
not indicate a problem with the video cassette player.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playbackfeatures(cont’d) Recording  
Use the following procedure to record TV programmes on a  
blank video tape.  
Rewind power off  
When the tape has finished rewinding, the VCR will turn itself  
off.  
Before proceeding:  
During stop:  
To record TV programmes, the video cassette player must  
be connected to the TV as shown in connection B of the  
“Connections” section.  
Turn on the power of the TV and video cassette player.  
Make sure that the video cassette’s safety tab is intact. If it  
has been removed, cover the hole with adhesive tape.  
Press the Rewind 1 button.  
1
2
Press the OPERATE button within 2 seconds.  
The STANDBY indicator will blink.  
Tracking adjustment  
Automatic tracking is adjusted each time a cassette is inserted  
in the video cassette player, you may wish to adjust tracking  
manually during playback.  
TV  
+
-
-
TVCH  
OPERATE  
TV/VIDEO  
1
2
VOLUME  
+
VIDEO  
Manual tracking  
TV/VIDEO  
OPERATE  
AUTO  
-
TRACKING  
+
Press the remote control’s AUTO button.  
OPERATE STANDBY  
SCENE  
FINDER  
NTSC  
AUDIO  
SP/LP/EP  
B.E.S.T.  
ON PAL TV  
NTSC3.58  
NTSC4.43  
(
(
+
+
-
B.E.S.T.  
LP/EP  
PAL NTSC  
1
2
2
[
L
J
Press the remote control’s TRACKING + or – button to  
adjust tracking.  
REMOTE CONTROL UNIT  
7 Press the AUTO button to return to automatic tracking.  
Notes:  
Trackingmayneedtobeadjustedeachtimeadifferentvideo  
tape is inserted for playback.  
Tracking will be automatically set to the reference position  
when the cassette is ejected.  
Load a blank video tape.  
1
2
Press the Record button to start recording. (On the  
remote control unit press the Record and Play 3  
buttons at the same time.)  
The recording indicator will light during recording.  
7 Press the Stop/Eject § button or the remote control’s  
Stop 7 button to stop recording.  
To stop recording temporarily:  
7 Press the Pause 8 button.  
The recording indicator will blink.  
Press the Play 3 button to resume recording.  
Notes:  
To engage recording standby, press the Record button  
and then press the Pause 8 button. The recording indicator  
will blink during recording standby. Press the Play 3 button  
again to start recording.  
If the Record button does not work, check to see if the  
cassette safety tab has been removed.  
The player automatically stops when record-standby  
continues for more than 5 minutes.  
The video tape will be rewound automatically when the end  
of the tape is reached.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Editing  
Problem  
No power  
Editing To/From Another Recorder  
Check point  
Is the power cord plugged  
in?  
Player  
Is the power turned on?  
Tape cannot be ejected  
No picture  
Was the video cassette  
player’s §buttonpressed?  
Is the TV set to the video  
channel?  
10-  
40  
32  
IN  
OUT  
RF OUT  
AUDIO  
VIDEO  
K
G
ANT.  
IN  
1-  
Is a cassette loaded?  
Aretheconnectionscorrect?  
No colour  
Set the Colour System Out-  
put switch according to the  
recorded tape system.  
When playing a MESECAM  
tape, select the NTSC 4.43  
mode.  
Audio/Video signals  
Shuttle search does not Is the video cassette player  
function in the playback mode?  
Disturbances in playback Istrackingadjustedproperly?  
picture  
Is the TV adjusted properly?  
Install this VCP a little way  
apart from the TV set.  
10-  
40  
32  
IN  
OUT  
RF OUT  
AUDIO  
VIDEO  
K
G
ANT.  
IN  
Remote control does not The batteries are weak.  
function Replace the batteries.  
Auto playback does not The video cassette’s record-  
1-  
Recorder  
function  
ing safety tab has not been  
removed.  
Recording does not func- Aretheconnectionscorrect?  
tion  
Was the Record button  
pressed?  
TV  
Receiver  
The video cassette’s record-  
ing safety tab is removed.  
The video cassette player Microcomputer malfunction.  
doesnotfunctionproperly Disconnect the power plug  
from the AC outlet and then  
VIDEO CHANNEL  
Connect the player’s AUDIO and VIDEO OUT connectors  
to the recorder’s AUDIO and VIDEO IN connectors.  
re-insert it.  
The microcomputer will be  
1
2
3
reset to its initial mode.  
Put the player in the Play mode.  
Put the recorder in the Record mode.  
About Head cleaning  
Notes:  
7 If the picture playback becomes blurred, it does not mean  
that the recorded program has been erased.  
7 Dirt accumulated on the video heads after long periods of  
use causes such troubles. In this case, head cleaning  
requiring highly technical care is necessary.  
NTSCtapesbeingplayedbackintheNTSCPLAYBACKON  
PAL TV mode cannot be dubbed to another recorder.  
When you dub an NTSC tape using your recorder as the  
playback deck, select NTSC 3.58 (or 4.43) with the Colour  
System Output switch.  
Connections made to the front panel AUDIO/VIDEO input  
terminals automatically override those made to the rear  
panel AUDIO/VIDEO input terminals.  
7 For head cleaning, consult the nearest JVC dealer.  
Important:  
7 To edit, both the player and the recorder must be of the  
same colour system. Press your recorder’s Colour sys-  
tem switch to select the appropriate colour system.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Format................................ VHS Standard  
Video recording system ..... Rotary, slant azimuth two-head  
helical scan system  
Rotary heads...................... 2 video heads  
RF output ........................... System G/K type modulation  
UHFch3240adjustable(preset  
ch 36)  
Recording (line input) ......... PAL, SECAM (MESECAM tape)  
NTSC 3.58, NTSC 4.43  
Playback (line output) ........ PAL, SECAM (MESECAM tape)  
NTSC 3.58  
NTSC 4.43  
Simulated PAL (NTSC tape)  
Video  
Line input level................. 0.5 – 2.0 Vp-p/75 ohms, unbal-  
anced  
Line output level............... 1.0 Vp-p/75 ohms, unbalanced  
S/N ratio........................... More than 45 dB  
Horizontal resolution ........ More than 250 lines  
(PAL/MESECAM)  
More than 220 lines (NTSC)  
Audio  
Line input level................. –8 dBm/50 k ohms, unbalanced  
Line output level............... –6 dBm/1 k ohm, unbalanced  
Frequency response ........ 100 Hz to 10,000 Hz  
Recording/Playback time  
CCIR ................................ 240 min. with E-240 cassette  
NTSC ............................... 160 min. with T-160 cassette  
FF, REW time .................... Approx. 2 min. 30 sec. with E-180  
cassette  
Power requirements  
Rating .............................. AC 110 – 240 V, 50/60 Hz  
Operating ......................... AC 90 – 260 V, 50/60 Hz  
Power consumption ........... 13 W  
Operation temperature ....... 5°C to 40°C  
Dimensions ........................ 360 (W) × 94 (H) × 276 (D) mm  
Weight ................................ 3.4 kg  
Standard accessories  
Remote control unit ............................................................... 1  
Batteries for remote control................................................... 2  
RF antenna cable.................................................................. 1  
Design and specifications subject to change without notice.  
Specifications shown are for SP mode unless otherwise  
specified.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VICTOR COMPANY OF JAPAN, LIMITED  
Printed In Japan  
0996 YSV*YP*YP  
C
COPYRIGHT 1996 VICTOR COMPANY OF JAPAN, LTD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Intel Computer Hardware 80960HA User Manual
Intel Computer Hardware SSDSC2BW120A301 User Manual
Jensen Car Stereo System CM9521 User Manual
JVC Blu ray Player LVT2007 003C User Manual
JVC Camcorder Accessories CU V615U User Manual
JVC Personal Computer LYT1361 012A User Manual
Kenmore Water Dispenser 625343920 User Manual
King Canada Planer CT 400D User Manual
KitchenAid Dishwasher KUDA230Y User Manual
KitchenAid Range DUALFUEL RANGES User Manual