DVD DIGITAL CINEMA SYSTEM
TH-C90
Consists of XV-THC90, SP-PWC90,
SP-THC90F, SP-THC90C and SP-THC90S
TH-C60
Consists of XV-THC60, SP-PWC60,
SP-THC60F, SP-THC60C and SP-THC60S
TH-C20
Consists of XV-THC20, SP-PWC20,
SP-THC20F, SP-THC20C and SP-THC20S
INSTRUCTIONS
LVT1504-005B
[US, UG, UX]
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings, Cautions and Others
Caution: Proper Ventilation
To avoid risk of electric shock and fire and to protect from damage, place the apparatus on a level surface. The minimal clearances are
shown below:
Wall or
XV-THC90/XV-THC60/
XV-THC20
XV-THC90/XV-THC60/
XV-THC20
Wall or
obstructions
obstructions
8 cm
3 cm
Front
10 cm
3 cm
No
obstructions
15 cm
Wall or obstructions
Wall or
obstructions
20 cm
SP-PWC90/
SP-PWC60/
SP-PWC20
SP-PWC90/SP-PWC60/
SP-PWC20
Front
No
15 cm
15 cm
15 cm
obstructions
CAUTION!
To avoid personal injury
or accidentally dropping
the unit, have two persons
unpack, carry, and install
the unit.
SP-THC90: 47 kg
SP-THC60: 32.5 kg
CAUTION
• Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
• Do not place any naked flame sources, such as lighted
candles, on the apparatus.
• When discarding batteries, environmental problems must be
considered and local rules or laws governing the disposal of
these batteries must be followed strictly.
• Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
[European Union only]
G-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
Introduction ....................................................2
Notes on handling ..................................................................... 2
Supplied accessories .................................................................. 2
Playback ........................................................ 21
Basic playback ...........................................................................21
One Touch Replay ...................................................................23
Fast-forward/fast-reverse search ............................................23
Skip to the beginning of a desired selection .........................24
Skipping at about 5-minute intervals ....................................24
Locating a desired title/group using number buttons ........24
Playing back a bonus group ....................................................25
Selecting the desired title/playlist from the control display .....25
About discs ......................................................3
Playable disc types ..................................................................... 3
Playable file types ....................................................................... 4
Description of parts and controls ..................5
Connections .....................................................8
Advanced operations ................................... 26
Using the surround mode .......................................................26
Using the on-screen bar ..........................................................27
Playing from a specified position on a disc ..........................29
Using the file control display ..................................................30
Resume Playback ......................................................................31
Selecting a view angle ..............................................................31
Selecting the subtitle ................................................................31
Selecting the audio ...................................................................32
Special picture playback ..........................................................32
Program Playback ....................................................................34
Random Playback ....................................................................35
Repeat Playback ........................................................................35
Tray lock ....................................................................................36
Setting the sound balance .......................................................36
Connecting the FM and AM antennas ................................... 8
Connecting the satellite (front, center, surround) speakers ......
9
Speaker layout .......................................................................... 13
Connecting a TV ...................................................................... 13
Connecting the powered subwoofer ..................................... 14
Connecting to an analog component ................................... 14
Connecting a cassette recorder (Only for TH-C90) ........... 14
Connecting to a digital component ...................................... 14
Connecting a USB mass storage class device ....................... 15
Connecting the power cord .................................................... 15
Operating external components with the
remote control ..............................................16
Operating the TV ..................................................................... 16
Operating the DBS tuner or CATV converter .................... 17
Operating the VCR .................................................................. 17
Setting DVD preferences ............................. 37
Using the setup menus ............................................................37
Menu description .....................................................................37
Basic operations ............................................18
Turning the system on/off ...................................................... 18
Selecting the source to play .................................................... 19
Adjusting the volume [VOLUME] ....................................... 19
Listening with headphones (not supplied) .......................... 19
Turning off the sound temporarily [MUTING] ................. 19
Adjusting the brightness of the indications [DIMMER] ... 19
Sleep Timer [SLEEP] ............................................................... 20
Adjusting the output level of the subwoofer and speakers ......20
Adjusting the sound ................................................................ 20
Changing the scan mode ........................................................ 20
Tuner operations .......................................... 39
Setting the AM tuner interval spacing ..................................39
Manual tuning ..........................................................................39
Preset tuning .............................................................................40
Selecting the FM reception mode ..........................................40
Reducing the noise of AM broadcast ....................................40
Karaoke operations ...................................... 41
Basic Karaoke operations ........................................................41
Reserving songs ........................................................................42
Selecting audio ..........................................................................42
Adding an echo effect to your voice ......................................43
Shifting the pitch of the playback sound ..............................43
References .................................................... 44
Maintenance .............................................................................44
Troubleshooting .......................................................................44
Specifications ............................................................................45
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
7 Safety precautions
Avoid moisture, water and dust
Notes on handling
7 Important cautions
Installation of the system
• Select a place which is level, dry and neither too hot nor too cold;
between 5°C and 35°C.
Do not place the system in moist or dusty places.
Avoid high temperatures
Do not expose the system to direct sunlight and do not place it near
a heating device.
When you are away
When away on travel or for other reasons for an extended period of
time, disconnect the power cord plugs from the wall outlet.
• Leave sufficient distance between the system and the TV.
• Do not use the system in a place subject to vibration.
Power cord
Do not block the vents
Blocking the vents may damage the system.
• Do not handle the power cord with wet hands.
• A small amount of power is always consumed while the power
cord is connected to the wall outlet (center unit only).
• When unplugging the power cord from the wall outlet, always
pull on the plug, not the power cord.
Care of the cabinet
When cleaning the system, use a soft cloth and follow the relevant
instructions on the use of chemically-coated cloths. Do not use
benzene, thinner or other organic solvents including disinfectants.
These may cause deformation or discoloring.
To prevent malfunctions of the system
• There are no user-serviceable parts inside. If anything goes
wrong, unplug the power cord and consult your dealer.
• Do not insert any metallic object into the system.
• Do not use any non-standard shape disc (like a heart, flower or
credit card, etc.) available on the market, because it may damage
the system.
If water gets inside the system
Turn the system off and disconnect the power cord plug from the
wall outlet, then call the store where you made your purchase. Using
the system in this condition may cause a fire or electrical shock.
• Do not use a disc with tape, stickers, or paste on it, because it may
damage the system.
Supplied accessories
Label sticker
Check to be sure you have all of the supplied accessories.
The number in parentheses is the quantity of the pieces supplied.
If anything is missing, contact your dealer immediately.
• Remote control (1)
Sticker
Paste
• Batteries (2)
• FM antenna (1)
• AM loop antenna (1)
Note about copyright laws
• Power cord (1)
Check the copyright laws in your country before recording from the
discs. Recording of copyrighted material may infringe copyright
laws.
• System cord (1)
• Composite video cord (1)
• AC plug adapters (2) (except for the countries of the Middle East)
• Speaker cords (only for TH-C90/TH-C60)
4 m: For satellite (front left/right) and center speakers (3)
10 m: For satellite speakers (surround left/right) (2)
• Screws
Note about copyguard system
The discs are protected by copyguard system. When you connect
the system to your VCR directly, the copyguard system activates and
the picture may not be played back correctly.
TH-C90:
M4 x 30 mm (8)
TH-C60:
M5 x 40 mm (4)
M4 x 20 mm (8)
• Speaker cord clamps (only for TH-C60) (4)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
Notes on DVD-R and DVD-RW
• This system does not support “multi-border” disc.
Playable disc types
Notes on CD-R and CD-RW
• This system can play CD-Rs or CD-RWs recorded with ISO 9660
format.
This system has been designed to play back the following discs:
DVD VIDEO
DVD AUDIO
• This system supports “multi-session” discs (up to 20 sessions).
• This system cannot play “packet write” discs.
Region code of DVD VIDEO
VCD/SVCD
Audio CD
DVD VIDEO players and DVD VIDEO discs have their own
Region Code numbers. This system can play back DVD VIDEO
discs whose Region Code numbers include the system’s Region
Code, which is indicated on the rear panel.
• Example of playable DVD:
For the countries of the Middle East
The √ in the list below shows available disc types and recording
formats.
Disc type
For the countries of the Southeast Asia
1
1
1
CD-R/-RW*
DVD-R*
DVD-RW*
Recording
format
DVD Video
DVD Audio
DVD VR
VCD/SVCD
Audio CD
MP3
—
—
—
√
√
√
√
√
If a DVD with an improper Region Code number is loaded,
“REGION CODE ERROR!” appears on the TV screen and playback
cannot start.
√
√
—
—
—
√
—
Some discs may not be played back because of their disc
characteristics, recording conditions, or damage or stain on them.
2
2
√
√*
√*
2
2
WMA
√
√*
√*
2
2
Unplayable discs
JPEG
√
√*
√*
DVD-ROM, DVD-RAM, CD-I (CD-I Ready), Photo CD, SACD,
2
2
ASF
√
√*
√*
etc.
3
2
2
MPEG-2
MPEG-1
DivX
√*
√*
√*
Playing back these discs will generate noise and damage the
speakers.
3
2
2
√*
√*
√*
2
2
√
√*
√*
1
2
3
*
*
*
This system can play finalized discs only.
Recorded with UDF Bridge format.
This system may not be able to play back a file if the file size is
too large.
• It is possible to play back finalized +R/+RW (DVD Video Format
only) discs. “DVD” lights on the display panel when a +R/+RW
disc is loaded.
• This system accommodates the NTSC and PAL system. When
you play an NTSC disc with the scan mode set to PAL (see page
20), the NTSC video signal is converted to the PAL60 signal and
output.
• The Non-DVD side of a “DualDisc” does not comply with the
“Compact Disc Digital Audio” standard. Therefore, the use of
Non-DVD side of a DualDisc on this product may not be
recommended.
• On some DVD VIDEOs, DVD AUDIOs, VCDs or SVCDs,
their actual operation may be different from what is explained
in this manual. This is due to the disc programming and disc
structure, not a malfunction of this system.
DVD Logo is a trademark of DVD Format/Logo Licensing
Corporation.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
About discs
For JPEG files
• We recommend to record a file at 640 x 480 resolution. (If a file
has been recorded at a resolution of more than 640 x 480, it will
take a longer time to be displayed.)
Playable file types
For all playable files
• This system can only play baseline JPEG files.
• The system can only recognize and play files with one of the
following extensions, which can be in any combination of upper
and lower case;
For ASF files
• The system supports the types of the advanced simple profile as
MPEG-4 files (MPEG-4 ASF).
• The system supports MPEG-4 files with the following conditions:
File format: ASF
Visual profile: MPEG-4 SP (Simple Profile)
Audio CODEC: G.726
MP3: “.MP3”, “.mp3”
WMA: “.WMA”, “.wma”
JPEG: “.JPG”, “.JPEG”, “.jpg”, “.jpeg”
ASF: “.ASF”, “.asf ”
MPEG-2/MPEG-1: “.MPG”, “.MPEG”, “.mpg”, “.mpeg”
DivX: “.DIVX”, “.DIV”, “.divx”, “.div”, and “.AVI”, “.avi”
• Some files may not be played back. In this case, “NOT
SUPPORTED” appears on the TV screen.
Max. picture size: 352 x 288 (CIF)
Max. bit rate: 384 kbps
• Some files may not be played back normally because of their disc
characteristics or recording conditions.
• The system recognizes up to 150 tracks (files) per group, 99
groups per disc/device, and the total number of the tracks (files)
that the system can play is 4000.
• MP3/WMA/JPEG/ASF/MPEG-2/MPEG-1/DivX files require a
longer readout time. (It differs due to the complexity of the
directory/file configuration.)
• If different kinds of files are mixed, set the FILE TYPE setting in
the PICTURE menu to the appropriate setting for the data to be
read (“AUDIO”, “STILL PICTURE” or “VIDEO”). (See page 38.)
For MPEG-2/MPEG-1 files
• The stream format should conform to MPEG system/program
stream.
• 720 x 576 pixels (25 fps)/720 x 480 pixels (30 fps) is
recommended for the highest resolution.
• This system also supports the resolutions of 352 x 576/480 x 576/
352 x 288 pixels (25 fps) and 352 x 480/480 x 480/352 x 240 pixels
(30 fps).
• The file format should be MP@ML (Main Profile at Main Level)/
SP@ML (Simple Profile at Main Level)/MP@LL (Main Profile at
Low Level).
• Audio streams should conform to MPEG1 Audio Layer-2 or
MPEG2 Audio Layer-2.
For MP3/WMA files
• The system supports MP3/WMA files recorded with a bit rate of
32 – 320 kbps and a sampling frequency of 16 kHz, 22.05 kHz,
24 kHz*, 32 kHz, 44.1 kHz, or 48 kHz.
• If the track information (track title, artist, and album name, etc.)
is recorded, it appears in the file control display on the TV screen.
(See page 30.)
For DivX files
• The system supports DivX 6.x, 5.x, 4.x and 3.11.
• The system supports DivX files whose resolution is 720 x 480
pixels or less (30 fps), and 720 x 576 pixels or less (25 fps).
• Audio stream should conform to Dolby Digital (including multi
channel) or MPEG1 Audio Layer-3 (MP3).
• The system does not support GMC (Global Motion
Compression).
• We recommend to record each piece of material (song) at a
sample rate of 44.1 kHz and at a data transfer rate of
128 (96*) kbps.
* For WMA only
• The file encoded in the interlaced scanning mode may not be
played back correctly.
• The system has its own Registration Code for DivX playback.
• If necessary, you can confirm the Registration Code of your
system using the OTHERS menu. (See page 39.)
• This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
• “CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS
RECOMMENDED THAT THE USER SWITCH THE
CONNECTION TO THE ‘STANDARD DEFINITION’
OUTPUT.
• USE OF THIS PRODUCT IN ANY MANNER THAT
COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE BY A CONSUMER
ENGAGING IN PERSONAL AND NON-COMMERCIAL
ACTIVITIES.
• DivX, DivX Ultra Certified, and associated logos are trademarks
of DivX, Inc. and are used under license.
• Official DivX® Ultra Certified product
• Plays all versions of DivX video (including DivX 6) with
enhanced playback of DivX® media files and the DivX® Media
Format
®
®
IF THERE ARE QUESTIONS REGARDING OUR TV SET
COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD
PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.”
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of parts and controls
Front panel (center unit)
The numbers in the figures indicate the pages where the details of the parts are described.
Display window
23
27
39
40
22
27
20
22
24
25
34
31
35, 36
19
22
33
22
40
39
35
41
21
21
21
23, 39
Disc tray (inside): 21
Remote sensor: 7
19
18
18
21
41
15
19
Rear panel (center unit)
Only for TH-C90: 14
14
8
14
15
13
13
14
14
IMPORTANT
Illustrations used in this manual are of TH-C90 unless mentioned
otherwise.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of parts and controls
Powered subwoofer
Front
SP-PWC90
SP-PWC60
SP-PWC20
POWER ON
lamp: 18
POWER ON
lamp: 18
POWER ON
lamp: 18
Rear
SP-PWC90
SP-PWC60
SP-PWC20
11
14
12
14
12
See below.
Power cord: 15
See below.
See below.
14
Power cord: 15
Power cord: 15
NOTE
* Do not block the ventilation openings to allow proper air
circulation by the cooling fan.
• For safety reasons, always ensure that there is sufficient space behind
the powered subwoofer.
Setting the VOLTAGE SELECTOR
Before plugging, set the correct voltage for your area with the voltage selector switch on the rear panel of the powered subwoofer.
Voltage selector switch
Voltage selector switch
For SP-PWC60/SP-PWC20
For SP-PWC90
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of parts and controls
Remote control
Putting batteries in the remote control
18
17
19
21
16
16
R03 (UM-4)/AAA (24F) type dry-cell
batteries (supplied)
Number
buttons: 24
16, 43
16
16 - 41
25, 29
41 - 43
25, 29
20 - 42
If the range or effectiveness of the remote control decreases, replace
both batteries.
16, 19
CAUTION
27 - 36
• Do not expose batteries to heat or flame.
19
Operating the system from the remote control
Aim the remote control directly to the front panel of the center unit.
• Do not block the remote sensor.
17, 23
21, 40
24, 39
31, 33
31, 32, 42
35
21, 40
21
23, 32
33
27
34, 42
24
29
34, 35
22
37
36
21, 31, 33
20
20
20
20
20, 33
19
• The button shaded in the illustration (TAPE) is only for TH-
C90.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
If reception is poor
Connecting the FM and AM
antennas
Center unit
7 AM loop antenna
AM loop antenna
Setting up supplied AM loop antenna
Outdoor single vinyl-covered wire antenna
(not supplied)
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
7 FM antenna
FM antenna (supplied)
Center unit
Connecting AM loop antenna
Extend the supplied FM antenna
horizontally.
1
Center unit
If reception is poor
Center unit
Outdoor FM antenna (not
supplied)
2
Standard type (75 Ω
coaxial) connector
Outdoor FM antenna cord (not
supplied)
Antenna cord
3
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords or power cords. This could cause poor reception.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
2
Connecting the satellite (front,
center, surround) speakers
Red
Clear
7 Assembling the front speakers — TH-C90
Black striped
Black
7 Connecting the center and surround speakers — TH-C90
Front speaker (SP-THC90F) (2)
Base plate (2)
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
Center speaker
(SP-THC90C) (1)
Surround speaker
(SP-THC90S) (2)
1
Speaker
Base plate
Screw M4 x 30 mm
(supplied)
Clear
Red
Direction of the base plate:
Make the short side front when fixing the base plate.
Black striped
Black
Speaker (front side)
To remove the speaker grilles:
The speaker grilles of the satellite speakers are removable.
The following procedure explains the removal of SP-THC90S’s
speaker grille. You can remove speaker grilles of other speakers by
the same procedure.
Holes
Projections
CAUTION
• NEVER insert your finger in between the speaker and the base plate,
as it may get hurt.
Speaker grille
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
7 Assembling the front and surround speakers — TH-C60
3
White
Red
Black
Black
Base plate (4)
Front speaker
Surround
speaker
Stand (4)
(SP-THC60F) (2)
(SP-THC60S) (2)
You can route the speaker cord
by using speaker cord clamp
(supplied).
• Check the model name of each speaker from the label on the
rear to locate each speaker correctly.
Assembled speakers
7 Connecting the center speaker — TH-C60
or
With stand: Refer to steps 1 to
3.
Without stand: Refer to steps
2 and 3.
Center speaker (SP-THC60C) (1)
Before assembling —
• Prepare a Phillips screwdriver (not supplied).
• Take care not to drop any component part while assembling;
otherwise, it may cause damage to the floor or injury.
1
Speaker
Red
White
Stand
Screw M5 x 40 mm (supplied)
Black
Black
2
When assembling a speaker without stand:
Speaker
For TH-C20, the front, surround and center speakers are
equipped with their speaker cords attached directly to their
speaker unit instead of having speaker terminals on their cabinet.
A: Use these screws (M4 x
45 mm) when assembling the
speaker with the base plate.
Base plate
Stand (or speaker
directly)*
Screw M4 x 20 mm
(supplied)*
* When assembling the speaker with the base plate, use the
screws A.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
7 Connecting the satellite speakers to the subwoofer — TH-C90
Before connecting the speaker cords;
Twist and pull the insulation coat off and
remove.
Powered subwoofer
SP-PWC90
Speaker cord
• Connect the black striped cords to the black (r) terminals.
• Connect the clear cords to the (q) terminals referring to the table
below:
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
White
Red
Green
Blue
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT)
Gray
Surround speakers
SP-THC90S
Front speakers
SP-THC90F
Center speaker
SP-THC90C
Precautions for daily use
CAUTION
• When moving the speakers, do not pull the speaker cords;
otherwise, the speakers may fall over, causing damage or injury.
• Do not reproduce sounds at so high a volume that the sound is
distorted; otherwise, the speakers may be damaged by internal
heat buildup.
• If you connect speakers other than the supplied ones, use speakers of
the same speaker impedance (SPEAKER IMPEDANCE) indicated
near the speaker terminals on the rear of the powered subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
• When installing the surround speakers on the wall;
• When holding a speaker, always grasp the lower portion.
• Do not lean against the speakers, as the speakers could fall down
or break, possibly causing an injury. Especially be careful that
children do not lean against them.
– Be sure to have them installed on the wall by qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from falling off the wall due to incorrect
installation or weakness in wall structure.
– Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
7 Connecting the satellite speakers to the subwoofer — TH-C60/TH-C20
Note that the illustration below is for SP-PWC60.
Before connecting the speaker cords;
Twist and pull the insulation coat off and remove.
Speaker cord
Powered subwoofer
TH-C60: SP-PWC60
TH-C20: SP-PWC20
• Connect the black cords to the black (r) terminals.
• Connect the white cords to the (q) terminals
referring to the table below:
Front speakers
TH-C60: SP-THC60F
TH-C20: SP-THC20F
FRONT SPEAKERS (LEFT)
FRONT SPEAKERS (RIGHT)
CENTER SPEAKER
White
Red
Green
Blue
SURROUND SPEAKERS (LEFT)
SURROUND SPEAKERS (RIGHT) Gray
Surround speakers
TH-C60: SP-THC60S
TH-C20: SP-THC20S
Center speaker
TH-C60: SP-THC60C
TH-C20: SP-THC20C
Precautions for daily use
CAUTION
• When moving the speakers, do not pull the speaker cords;
otherwise, the speakers may fall over, causing damage or injury.
• Do not reproduce sounds at so high a volume that the sound is
distorted; otherwise, the speakers may be damaged by internal
heat buildup.
• If you connect speakers other than the supplied ones, use speakers of
the same speaker impedance (SPEAKER IMPEDANCE) indicated
near the speaker terminals on the rear of the powered subwoofer.
• DO NOT connect more than one speaker to one speaker terminal.
• When installing the satellite speakers on the wall;
– Be sure to have them installed on the wall by qualified personnel.
DO NOT install the satellite speakers on the wall by yourself to
avoid unexpected damage from falling off the wall due to incorrect
installation or weakness in wall structure.
– Care must be taken in selecting a location for speaker installation
on a wall. Injury to personnel or damage to equipment may result
if the speakers installed interfere with daily activities.
For TH-C60:
• When holding a speaker, always grasp the lower portion.
• Do not lean against the speakers, as the speakers could fall down
or break, possibly causing an injury. Especially be careful that
children do not lean against them.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Speaker layout
To obtain the best possible sound from this system, you need to
place all the speakers except the subwoofer at the same distance
from the listening position.
Connecting a TV
• You can get better picture quality in the order — Component
video > S-video > Composite video.
• Distortion of picture may occur when connecting to the TV via a
VCR, or to a TV with a built-in VCR.
• You need to set “MONITOR TYPE” in the PICTURE menu
correctly according to the aspect ratio of your TV. (See page 38.)
Center speaker
Front left
speaker
Front right
speaker
7 To connect a TV equipped with the component video input
Powered
subwoofer
jacks
If your TV supports progressive video input, you can enjoy a high
quality picture by setting the progressive scan mode to active. (See
page 20.)
Center unit
TV
To component
video input
Surround left
speaker
Surround right
speaker
Component video cord (not supplied)
If your speakers cannot be placed at the same distance from the
listening position
You can adjust the delay time of the speakers. See “Delay menu
(DELAY)” on page 38.
NOTE
• If the component video input jacks of your TV are of the BNC type,
use a plug adapter (not supplied) to convert the pin plugs to BNC
plugs.
• The component video signals can be output only when you select
DVD or USB MEMORY as the source to play. (See page 19.)
NOTE
• Place the satellite speakers on a flat and level surface.
• The front and center speakers are magnetically shielded to avoid color
distortions on TVs. However, if not installed properly, they may cause
color distortions. So, pay attention to the following when installing
the speakers.
– When placing the speakers near a TV set, turn off the TV’s main
power switch or unplug it before installing the speakers. Then wait
at least 30 minutes before turning on the TV’s main power switch
again.
7 To connect a TV equipped with the composite or S-video jacks
Center unit
Composite video cord (supplied)
or
Some TVs may still be affected even though you have followed the
above. If this happens, move the speakers away from the TV.
• The surround speakers are not magnetically shielded.
If they are located nearby the TV or monitor, it will probably cause
color distortion on the screen. To avoid this, do not place the speakers
nearby the TV or monitor.
S-video cord
(not supplied)
Align the 5 marks.
To S-video input
To composite
video input
• Be sure to place the powered subwoofer to the TV’s right. If you place
the powered subwoofer to the TV’s left, keep sufficient distance
between them to prevent the TV screen from appearing mottled.
TV
NOTE
• Select the appropriate scan mode according to your TV. (See page 20.)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting the powered
subwoofer
Connecting a cassette recorder
(Only for TH-C90)
You can enjoy playing tape and also recording tracks/files from this
Powered
system.
System cord
Center unit
subwoofer
(supplied)
Center unit
RCA pin plug cord
(not supplied)
Align the 5 marks.
Align the 5 marks.
RCA pin plug cord
(not supplied)
Connecting to an analog
component
To audio output
To audio input
You can enjoy the sound of an analog component.
Center unit
Cassette recorder
NOTE
• The surround mode takes effect for the signals output from the TAPE
OUT jacks. When recording to a tape, set the surround mode to
“OFF”. (See page 26.)
S-video cord
(not supplied)
RCA pin plug
cord
or
(not supplied)
Composite video
cord
Connecting to a digital
component
(not supplied)
1
2
3
You can enjoy the sound of a digital component.
Center unit
VCR (1 3 or 2 3)
TV (3)
Cassette recorder (3)
1 To composite video output
2 To S-video output
3 To audio output
To digital optical output
DBS* tuner
MD player
NOTE
Digital optical cord (not supplied)
• The signals input to the VIDEO jack of the VCR IN jacks will be
output only from the VIDEO jack of the VIDEO OUT jacks, not from
the S-VIDEO jack of the VIDEO OUT jacks.
* DBS = Direct Broadcasting Satellite
NOTE
• Only digital audio signals can be input when selecting “DBS” as the
source to play. (See page 19.) When connecting a video component
such as a DBS tuner, operate this system to listen to the sound.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not connect the power cord until all other connections have been made.
Connections
Connecting a USB mass storage
class device
Connecting the power cord
Make sure that all other connections have been completed.
You can connect a USB mass storage class device such as a USB
flash memory device, hard disc drive, multimedia card reader,
digital camera, etc. to this system.
Center unit
• After connecting a USB mass storage class device to this system
and selecting USB MEMORY as the source, the file control
display appears on the TV screen. (See page 30.)
USB cable (not supplied)
Center unit (on the
front panel)
Power cord (supplied)
Plug into AC outlet.
NOTE
• When connecting a USB mass storage class device, refer also to its
manual.
• Connect one USB mass storage class device to the system at a time. Do
not use a USB hub.
Powered subwoofer
SP-PWC90
Power cord
Plug into AC outlet.
• You cannot charge the USB mass storage class device while
connecting it to the USB MEMORY jack.
• While playing back a file in a USB mass storage class device, do not
disconnect the device. It may cause a malfunction of both the system
and the device.
• JVC bears no responsibility for any loss of data in the USB mass
storage class device while using this system.
• When connecting with a USB cable, use a cable less than 1 m in
length.
• This system is compatible with the USB 2.0 Full-Speed (not
compatible with the USB 1.1).
SP-PWC60/SP-PWC20
Power cord
Plug into AC outlet.
• You can play back the following types of files in a USB mass storage
class device (maximum data transfer rate: 2 Mbps):
– Music: MP3, WMA
CAUTION
• Disconnect the power cord before cleaning or moving the system.
• Do not pull on the power cord to unplug the cord. When unplugging
the cord, always grasp and pull the plug so as not to damage the cord.
• If the AC outlets do not match the AC plugs, use the supplied AC plug
adapter (except for the countries of the Middle East).
– Picture: JPEG
– Movie: MPEG-4 (ASF), DivX (maximum frame rate of 30 fps for
progressive)
• You cannot play back a file larger than 2 GB.
• When playing a file which has a large transfer rate, frames or sounds
may be dropped during playback.
• This system cannot recognize a USB mass storage class device whose
rating exceeds 5 V/500 mA.
• This system may not recognize some USB mass storage class devices.
• This system may not play back some files even though their formats
are listed above.
.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating external components with the remote control
The buttons described below are used on pages 16 and 17.
Operating the TV
7 To set the manufacturer’s code
1 Slide the remote control mode selector
to TV.
2 Press and hold F TV.
Keep the button pressed until step 4 is finished.
3 Press ENTER.
Number
buttons
4 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Hitachi TV: Press 1, then 0.
For a Toshiba TV: Press 0, then 8.
Remote
control mode
selector
Manufacturer
JVC
Code Manufacturer
Code
12
01*
10
Samsung
Sanyo
Sharp
Hitachi
13, 14
06
Magnavox
Mitsubishi
Panasonic
Philips
02
03
Sony
07
04, 11 Toshiba
08
15
05
Zenith
09
RCA
* “01” is the initial setting.
(play button)
5 Release F TV.
If there is more than one code listed for corresponding brand,
try each one until you enter the correct one.
NOTE
7 Operation
• Manufacturers’ codes are subject to change without notice.
• Set the codes again after replacing the batteries of the remote control.
Aim the remote control at the TV.
IMPORTANT
Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
The following buttons are available:
F TV:
Turns TV on and off.
Adjusts the volume.
Selects the input mode (either TV or
VIDEO).
Changes the channels.
TV VOL +/–:
TV/VIDEO:
CH +/–:
1-10, 0, h10 (100+): Selects the channel.
TV RETURN:
Alternates between the previously selected
channel and the current channel.
NOTE
• The operating buttons may differ depending on manufacturers.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 16 for button locations.
Operating external components with the remote control
Operating the DBS tuner or
CATV converter
Operating the VCR
7 To set the manufacturer’s code
7 To set the manufacturer’s code
1 Slide the remote control mode selector
to VCR/DBS.
1 Slide the remote control mode selector
to VCR/DBS.
2 Press VCR.
2 Press DBS.
3 Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
3 Press and hold F VCR/DBS.
Keep the button pressed until step 5 is finished.
4 Press ENTER.
4 Press ENTER.
5 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
5 Press number buttons (1-9, 0) to enter
the manufacturer’s code (2 digits).
Examples:
For a Philips VCR: Press 0, then 9.
For an NEC VCR: Press 2, then 5.
For a GI Jerrold product: Press 0, then 1.
For a Sony product: Press 2, then 0.
Manufacturer
JVC
Code
Manufacturer
Philips
Code
09
01*, 02, 03
11, 26
29
Manufacturer
Echostar
GI Jerrold
Hamlin
Code
Emerson
Fisher
RCA
05, 06
24
21
Samsung
01*, 02, 03, 04, 05, 06, 07, 08
Funai
10, 14, 15, 16 Sanyo
21, 22, 23
27, 28
30
15, 16, 17, 18
13, 14
19
Gold Star
Hitachi
12
Sharp
Pioneer
04
Shintom
Sony
RCA
Mitsubishi
NEC
13
18, 19, 20
08
Scientific Atlanta
Sony
09, 10
20
25
Zenith
Panasonic
07, 17
Zenith
11, 12
* “01” is the initial setting.
* “01” is the initial setting.
6 Release F VCR/DBS.
6 Release F VCR/DBS.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
If there is more than one code listed for your brand, try each
one until you enter the correct one.
7 Operation
7 Operation
Aim the remote control at the VCR.
Aim the remote control at the DBS tuner or CATV converter.
IMPORTANT
IMPORTANT
Before using the remote control to operate a
VCR;
Before using the remote control to operate a
DBS tuner or CATV converter;
1
Set the remote control mode selector
to VCR/DBS.
1
Set the remote control mode selector
to VCR/DBS.
2
Press VCR.
2
Press DBS.
The following buttons are available:
The following buttons are available:
F VCR/DBS:
Turns VCR on and off.
F VCR/DBS:
Turns DBS tuner or CATV converter on and
3 (play button):
Starts playback.
off.
7:
8:
Stops operation.
CH +/–:
Changes the channels.
Pauses playback.
Fast forwards video tape.
Rewinds video tape.
Press this button together with 3 (play
button) to start recording or together with 8
to pause recording.
1-10, 0, h10 (100+): Selects the channel.
y
:
1:
REC:
CH +/–:
Changes the TV channels on the VCR.
NOTE
• When operating a VCR or DBS tuner/CATV converter;
– The source setting of VCR or DBS remains after you have changed
the remote control mode selector to AUDIO or TV. When operating
VCR or DBS tuner/CATV converter again, it is not necessary to
press VCR or DBS after setting the remote control mode selector.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
The buttons on the remote control are used to explain most of the
operations in this manual. You can use the buttons on the center
unit same as on the remote control for operations unless
otherwise noted.
Turning the system on/off
On the remote control:
Press FAUDIO.
On the center unit:
IMPORTANT
Before using the remote control for the following
operation;
Press F.
When DVD or USB MEMORY is selected as the source (see page
19), the following messages will appear on the TV screen.
• Set the remote control mode selector to AUDIO.
The buttons described below are used on pages 18 to 20.
Source
selecting
buttons
• “OPEN”/“CLOSE”:
Appears when opening or closing the disc tray.
• “NOW READING”:
Appears when the system is reading the disc/file information.
• “REGION CODE ERROR!”:
Appears when the Region Code of the DVD VIDEO does not
match the code the system supports. The disc cannot be
played back.
• “NO DISC”:
Remote
control mode
selector
Appears when no disc is loaded.
• “NO USB DEVICE”:
Appears when no USB mass storage class device is connected.
• “CANNOT PLAY THIS DISC”:
Appears when unplayable disc is loaded.
• “CANNOT PLAY THIS DEVICE”:
Appears when unplayable USB mass storage class device is
connected.
Cursor
(3/2)/
ENTER
NOTE
• The STANDBY lamp on the center unit lights red when the power is
turned off. The lamp goes off when the power is turned on.
• The power supply to the subwoofer is linked to the center unit. The
POWER ON lamp on the subwoofer lights green when the power is
turned on.
• A small amount of power is consumed even when the power is turned
off (center unit only). This is called standby mode and the STANDBY
lamp lights in this mode. Unplug the power cord from the AC outlet
to turn the power off completely.
• You can also turn on the system by pressing the following buttons:
– One of the DISC (1-5) buttons (with SHIFT pressed) on the remote
control
– One of the DISC (1-5) 0 buttons on the center unit
– One of the source selecting buttons or 3 on the remote control
– One of the DISC (1-5) 3 buttons or 3 on the center unit
STANDBY lamp
18
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 18 for button locations.
Basic operations
Selecting the source to play
Listening with headphones
(not supplied)
On the remote control:
Press one of the source selecting buttons
(DVD, USB MEMORY, FM/AM, VCR, DBS or
CAUTION
Be sure to turn down the volume;
• Before connecting or putting on headphones as high volume may
damage both the headphones and your hearing.
• Before disconnecting headphones as high volume may be suddenly
output from the speakers.
TAPE*).
DVD:
To play back a disc (DVD VIDEO, VCD etc.). (See page 21.)
USB MEMORY:
To play back a file in a USB mass storage class device. (See “To play
a file in a USB mass storage class device” on page 21.)
While connecting a pair of headphones to the PHONES jack on the
center unit, the system automatically cancels the surround mode
(see page 26) currently selected, deactivates the speakers, turns the
subwoofer’s power off, and activates the headphone mode.
“H. PHONE” appears on the display window.
FM/AM:
To tune in an FM or AM station. (See page 39.) Each time you press
the button, the band alternates between FM and AM.
VCR:
Headphone mode
When using the headphones, the following signals are output
regardless of your speaker setting;
To select the source from a component connected to the VCR IN
jacks and AUX IN (VCR) jacks. (See page 14.)
• For 2 channel sources, the front left and right channel signals are
output from the headphones.
• Multi-channel signals are down-mixed and output from the
headphones.
• (For DVD AUDIO) When the disc prohibits down-mixing, only
the front left and right channels are output from the headphones.
DBS:
To select the source from a component connected to the DIGITAL
IN (DBS) jack. (See page 14.)
TAPE*:
To select the source from a component connected to the TAPE IN
jacks. (See page 14.)
On the center unit:
Turning off the sound
temporarily [MUTING]
Press MUTING.
Press SOURCE repeatedly until the source
name you want appears on the display
window.
NOTE
To restore the sound
Perform one of the following:
• Press MUTING again.
• When AM, FM, DBS or TAPE* is selected, this system does not
output video signals.
• It may take time to change the source.
• Press VOL +/– (or turn VOLUME on the center unit).
* Only for TH-C90
Adjusting the brightness of the
indications [DIMMER]
Adjusting the volume
[VOLUME]
Press DIMMER.
Each time you press the button, you can change the brightness level
in 3 steps.
CAUTION
• Always set the volume to minimum level before starting any source.
If the volume is set at a high level, the sudden blast of sound could
permanently damage your hearing and/or blow out the speakers.
On the remote control:
Press VOL +/–.
On the center unit:
Turn VOLUME.
• To increase the volume, turn VOLUME clockwise.
• To decrease the volume, turn VOLUME counterclockwise.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 18 for button locations.
Basic operations
Sleep Timer [SLEEP]
Adjusting the sound
The system turns off automatically when the specified period of
1 Press TREBLE/BASS to show “TRE” or
time has passed.
“BASS” on the display window.
Press SLEEP.
Each time you press the button, the indication alternates
between “TRE” and “BASS”.
Each time you press the button, the shut-off time changes as
follows:
• TRE: Select this to adjust treble sound.
• BASS: Select this to adjust bass sound.
– – (off) Z 10 Z 20 Z 30 Z 60 Z 90 Z 120 Z 150 Z
(back to the beginning)
(Unit: min.)
2 Press LEVEL +/– to adjust the level from
Example:
– 10 to +10 (in 2 steps).
minutes
NOTE
• The adjustments take effect for all sources.
Changing the scan mode
The system can be accommodated to your TV’s scan mode.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly.
NOTE
• To use the system in the progressive mode, it is required that the
center unit is connected to the TV by using a component video cord
(not supplied). (See page 13.)
To cancel
Press SLEEP repeatedly until “SLEEP – –” appears.
• Turning off the power also cancels the Sleep Timer.
7 While DVD or USB MEMORY is selected as the source and
1 stPoprpeedss and hold SCAN MODE for
Adjusting the output level of
the subwoofer and speakers
2 seconds.
Currently selected scan mode appears on the display window.
2 Press Cursor 3/2 to select the desired
1 Press SPK LEVEL to show the target
speaker indication on the display
window.
mode.
• NT. 480I: Select when your TV supports the NTSC
interlaced video input only.
• NT. 480P: Select when your TV equipped with component
jacks supports the NTSC progressive video input.
• PAL. 576I: Select when your TV supports the PAL interlaced
video input only.
Each time you press the button, the indication of the speakers
changes as follows:
FRNT L (Front Left speaker) Z FRNT R (Front Right
speaker) Z CENTER (Center speaker) Z SURR L
(Surround Left speaker) Z SURR R (Surround Right
speaker) Z SUBWFR (Subwoofer) Z (back to the
beginning)
• PAL. 576P: Select when your TV equipped with component
jacks supports the PAL progressive video input.
You can get better picture quality in the progressive mode
(“NT. 480P” or “PAL. 576P”) than in the interlace mode
(“NT. 480I” or “PAL. 576I”).
2 Press LEVEL +/– to adjust the output
level from –6 to +6.
3 Press ENTER while the selected mode is
NOTE
displayed.
When the progressive mode is selected, the PROGRESSIVE
indicator lights on the display window.
• You can also make adjustments by using the setup menu shown on
the TV screen. (See page 38.)
• The adjustments take effect for all sources other than FM/AM. For
FM/AM, adjust the level separately by repeating the procedure above.
NOTE
• Changing the scan mode does not take effect when connecting the TV
with the S-video or the composite video cord.
• Although the picture may be distorted when you press ENTER, this is
not a malfunction of the system.
• There are some progressive TVs and High-Definition TVs that are
not fully compatible with this system, resulting in an unnatural
picture when playing back a DVD VIDEO in the progressive scan
mode. In such a case, change the scan mode to the interlace mode.
• All JVC progressive TVs and High-Definition TVs are fully
compatible with this system.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
• The icon such as
shows the disc formats or file types the
operation is available for.
Basic playback
IMPORTANT
Before using the remote control for the
following operation;
7 To play a disc
1 Press the desired DISC (1-5)
1
Set the remote control mode selector
0 on the center unit.
to AUDIO.
2
Press DVD or USB MEMORY.
The system turns on and the disc tray comes
out.
The buttons described below are used on pages 21 to 25.
2 Place a disc.
Label side up
When placing an 8 cm disc
3 Press DISC (1-5), with SHIFT pressed.
NOTE
• Up to 5 discs can be loaded.
Number
buttons
• You can also start playback by pressing the following buttons:
– DVD or 3 (play button) on the remote control
– DISC (1-5) 3 or 3 on the center unit
Remote
control mode
selector
• The system plays back available discs sequentially until you stop
playback or until the disc loaded on the DISC 5 tray reaches to the
end. However, when DVD VIDEO or DVD AUDIO is loaded in the
system, playback of the disc next to the DVD VIDEO or DVD
AUDIO will not start.
Cursor
(3/2/Y/5)/
ENTER
7 To play a file in a USB mass storage class device
Press USB MEMORY.
The operations of the files in a USB mass storage class device
depend on the file types stored in the device.
• For details on connecting a USB mass storage class device, see
“Connecting a USB mass storage class device”. (See page 15.)
(play button)
7 When playing the following files...
• For MP3/WMA files
The file control display (see page 30) appears on the TV screen.
• For JPEG files
Each file (still pictures) is shown on the TV screen for about 3
seconds (slide-show). When stopping playback, the file control
display (see page 30) appears on the TV screen.
• For ASF/MPEG-2/MPEG-1 files
Pressing TOP MENU/PG or MENU/PL shows the file control
display (see page 30) on the TV screen during playback.
• For DivX files
During the readout time, “READING INDEX” may appear on
the TV screen.
Pressing TOP MENU/PG or MENU/PL shows the file control
display (see page 30) on the TV screen during playback.
NOTE
• When several types of files are recorded on a disc/device, select
appropriate file type on the setup menu. (See page 38.)
• (For JPEG) The system cannot accept operations even though you
press any buttons before the entire picture appears on the TV screen.
7 To pause playback
Press 8.
To continue playback, press 3 (play button).
7 To stop
Press 7.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 21 for button locations.
Playback
VCD/SVCD/CD
Example: When a CD is played back
7 On-screen guide icons
During DVD VIDEO playback, the following guide icons may
appear for a while on the TV screen;
Signal and speaker
indicators
Track number
•
•
•
•
: appears at the beginning of a scene containing multi-subtitle
languages.
: appears at the beginning of a scene containing multi-audio
languages.
: appears at the beginning of a scene containing multi-angle
views.
(Play),
fast-reverse),
Elapsed playing time (hour:minute:second)
(Pause),
/
(Fast forward/
/
(Slow-motion forward/
NOTE
reverse): appears when you perform each operation.
• When a VCD or SVCD with PBC function is played, the elapsed
playing time does not appear, but “PBC” appears.
•
: the disc cannot accept an operation you have tried to do.
NOTE
MP3/WMA file
Example: When an MP3 file is played back
• If you do not want the on-screen guide icons to appear, see page 39.
Signal and speaker
7 Playback information on the display window
indicators
Track number
DVD VIDEO
Example: When a DVD VIDEO encoded with Dolby Digital 5.1 ch
is played
Elapsed playing time
(hour:minute:second)
MP3 indicator*
Elapsed playing time (hour:minute:second)
(during playback only)
Chapter number
Pressing FL DISPLAY
Group number
Signal and speaker indicators (See page 27.)
Surround mode and digital signal format (See page 27.)
Pressing FL DISPLAY
Track number
* WMA indicator lights for a WMA file.
Title number
Chapter number
JPEG file
Example: When slide-show is played back
File number
DVD AUDIO
Signal and speaker indicators
Pressing FL DISPLAY
Track number
Elapsed playing time
(hour:minute:second)
Group number
File number
Pressing FL DISPLAY
Group number
Track number
Continued on the next page
22
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 21 for button locations.
Playback
ASF/MPEG-2/MPEG-1/DivX file
Example: When an ASF file is played
7 Disc information on the display window
The disc indicators on the display window show the current status
of the corresponding disc tray.
Track number
Signal and speaker indicators
Example: When the discs are loaded to disc trays 1, 2 and 5, and the
disc in the disc tray 5 is selected.
Currently selected disc
number
Elapsed playing time (hour:minute:second)
(during playback only)
Pressing FL DISPLAY
Currently loaded disc number
Group number
Track number
7 Screen saver
An image may burn in on a TV screen if a static picture is displayed
for a long time. To prevent this, the system automatically dims the
screen if a static picture is displayed for over 5 minutes (the screen
saver function).
• Pressing any button will cancel the screen saver function.
• If you do not want to use the screen saver function, see page 38.
DVD VR disc
Example: During playback on the Original program*
Elapsed playing time
Chapter number
(hour:minute:second)
One Touch Replay
You can move back the playback position by 10 seconds
from the current position.
7 During playback
Pressing FL DISPLAY
Press
.
Title number
Chapter number
NOTE
• This function works in the same title.
• This function is not available during the repeat playback.
• This feature may not work for some discs.
Example: During playback on the Playlist*
Fast-forward/fast-reverse
search
Elapsed playing time
(hour:minute:second)
Chapter number
7 During playback
On the remote control:
Press y or 1.
Each time you press the button, the search
speed changes (x2, x5, x10, x20, x60).
Pressing FL DISPLAY
To return to normal speed playback
Press 3 (play button).
Playlist number
Chapter number
On the center unit:
Press and hold x or 4.
Continuously pressing x or 4 increases the fast-forward/
reverse search speed (x5, x20).
* Pressing TOP MENU/PG or MENU/PL, you can change the play
mode. (See page 25.)
NOTE
NOTE
• When a DVD VIDEO, DVD VR, VCD, SVCD, or ASF/MPEG-2/
MPEG-1/DivX is played back, no sound comes out during fast-
forward/reverse search.
• You can change the time information mode (except for MP3/WMA/
ASF/MPEG-2/MPEG-1/DivX). (See page 28.)
• You can also check the playback information on the TV screen. (See
page 27.)
• When a DVD AUDIO, CD, or MP3/WMA is played back, sound is
intermittent and low during fast-forward/reverse search.
• This feature may not work for some discs/files.
• For MP3/WMA, the search speed is not shown.
• The search speed for DivX is y 1, y 2, y 3 for forward search,
and 11, 12 and 13 for reverse search.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 21 for button locations.
Playback
Skip to the beginning of a
desired selection
Skipping at about 5-minute
intervals
You can skip within the file at about 5-minute intervals.
This is useful especially when you want to skip within a
long file.
7 Using x/4 buttons
7 For DVD VIDEO/DVD VR (chapter): During
7 During playback
playback
7 For VCD/SVCD (track): During playback
without PBC function
Press Cursor 3/2.
Each time you press the button, the playback position skips to the
beginning of the previous or next interval. Each interval is about
5 minutes.
7 For DVD AUDIO/CD/MP3/WMA/JPEG/
ASF/MPEG-2/MPEG-1/DivX (track/file): During playback or
while stopped
Press x or 4 repeatedly.
NOTE
NOTE
• Intervals are automatically assigned from the beginning of a file.
• This feature is available only within the same file.
• This feature may not work for some discs/files.
• When playing back an MP3/WMA/JPEG/ASF/MPEG-2/MPEG-1/
DivX file, you can make operations using the file control display. (See
page 30.)
• This feature may not work for some discs/files.
Locating a desired title/group
using number buttons
7 Using number buttons on the remote control
7 For DVD VIDEO/DVD VR (title, chapter):
While stopped, the title number is selected.
During playback, the chapter number is selected.
7 For DVD AUDIO (track):
7 During playback or while stopped
1 Press TITLE/GROUP.
“– –” is shown in the title/group display area
in the display window.
During playback or while stopped
7 For VCD/SVCD (track):
Example: During DVD VIDEO playback
During playback or while stopped without PBC function
7 For CD/MP3/WMA/JPEG/ASF/MPEG-2/MPEG-1/DivX
(track/file):
During playback or while stopped
Press number buttons (0-10, h10) to
2 While the display window shows “– –”,
use number buttons (0-10, h10) to
enter the desired title or group
select the desired number.
• For details on using the number buttons, see “How to use the
number buttons” below.
number.
How to use the number buttons
The system starts playback from the first chapter/track/file of
the selected title/group.
• For details on using the number buttons, see “How to use the
number buttons” on the left column.
To select 3:
Press 3.
To select 10: Press 10.
To select 14: Press h10, 1, then 4.
To select 24: Press h10, 2, then 4.
To select 40: Press h10, 4, then 0.
To select 114: Press h10, h10, 1, 1, then 4.
NOTE
• When locating a title of a DVD VR disc, the PG or PL indicator may
light on the display window.
• This feature may not work for some discs/files.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 21 for button locations.
Playback
Playing back a bonus group
Selecting the desired title/
playlist from the control
display
Some DVD AUDIOs have a special group called “bonus
group” whose contents are not open to the public. The
bonus group is always assigned to the last group of a disc. To
play back a bonus group, you have to enter the specific “key
number” (a password). The way of getting the key number depends
on the disc. After getting the key number, you can play back the
bonus group by following the procedure below.
7 During playback or while stopped
DVD
VR
1 Press TOP MENU/PG or MENU/PL.
The control display is shown on the TV screen, and the system
starts playback of the first title/playlist.
7 While the BONUS indicator lights up on the display window
• The PLAY LIST is shown only when the playlist is on the
DVD VR disc.
1 Select the bonus group.
For selecting the group, see “Locating a desired title/group
using number buttons” described on page 24.
The key number entry indication appears.
TOP MENU/PG: shows the ORIGINAL PROGRAM.
Example:
On the TV
On the display window
*1: Title number
2 Press number buttons (0-9) to enter the
*2: Recording date
key number, then press ENTER.
When you enter the correct key number, playback starts and
the BONUS indicator goes off.
*3: Recording source (TV station, the input terminal of the
recording equipment etc.)
*4: Start time of recording
*5: Title of the original program/playlist (The title may not be
displayed depending on the recording equipment.)
*6: Current title
• If you enter a wrong number, reenter the correct number.
To clear the key number entry
Perform whichever one of the following:
• Press 7.
MENU/PL: shows the PLAY LIST.
Example:
• Open the disc tray.
• Turn off the system.
NOTE
• In Random Playback, tracks in the bonus group are not played back.
*7: Playlist number
*8: Creating date of playlists
*9: Number of chapters
*10: Total playing time
*11: Current playlist
2 Press Cursor Y/5 to select the desired
title/playlist.
The system starts playback of the selected title/playlist.
To clear the control display
Press ENTER.
About the play mode on a DVD VR disc
• Original program (ORIGINAL PROGRAM):
The system can play back the original picture in the recorded
order.
• Playlist (PLAY LIST):
The system can play back the playlist edited by the recording
equipment.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
• The icon such as
shows the disc formats or file types the
operation is available for.
Using the surround mode
IMPORTANT
Before using the remote control for the following
operation;
You can enjoy more realistic sound field than a stereo sound by
using the surround mode.
• Set the remote control mode selector to AUDIO.
• There are exceptions in the operation mentioned
above. In such a case, follow each instruction.
7 Auto Surround (AUTO SUR)
Used to reproduce the sound as it is recorded without any
conversion (downmixing or simulation, etc.). For example, a
multichannel source is automatically reproduced in multichannel
audio.
The buttons described below are used on pages 26 to 36.
7 Dolby Surround
Dolby Pro Logic II*
1
Dolby Pro Logic II has a newly developed multichannel playback
format to decode all 2 channel sources — stereo source and Dolby
Surround encoded source — into a 5.1 channel.
Dolby Pro Logic II has two modes — Movie mode and Music mode:
• Pro Logic II Movie (MOVIE)
Suitable for reproduction of Dolby Surround encoded sources
Number
buttons
Remote
controlmode
selector
bearing the mark
• Pro Logic II Music (MUSIC)
.
Suitable for reproduction of any 2 channel stereo music sources.
1
Dolby Digital*
Used to reproduce multichannel soundtracks of the software
Cursor
(3/2/Y/5)/
ENTER
encoded with Dolby Digital (
).
• There are other encoding formats of digital surround introduced
by Dolby Laboratories, such as Dolby Digital EX.
(play button)
2
7 DTS Digital Surround*
Used to reproduce multichannel soundtracks of the software
encoded with DTS Digital Surround (
).
DTS Digital Surround (DTS) is another discrete multichannel
digital audio format available on CD and DVD software.
• There are other encoding formats of multi-channel digital
surround introduced by Digital Theater Systems, Inc., such as
DTS-ES, DTS 96/24.
Available Surround modes for each input signal
The √ marks show available surround modes.
Mode Surround
off
Auto
DTS Digital Linear Packed
Dolby Surround
DSP
Surround
Surround
DTS
PCM
PCM
3
3
3
3
Signal
OFF
AUTO SUR MOVIE* MUSIC* DOLBY D
LPCM PPCM STADIUM* ALL ST*
Dolby D
√
√
√
√
√
√
√
—
√
—
√
√
—
—
√
—
—
—
—
√
—
—
—
—
√
—
√
—
√
(Multichannel)
Dolby D
(2 channel)
DTS Digital Surround
(Multichannel)
√
√
√
√
—
—
—
—
—
—
√
—
√
—
√
—
√
DTS Digital Surround
(2 channel)
Linear/Packed PCM
(Multichannel)
Analog (VCR) or Linear/
Packed PCM (2 channel)
—
—
—
—
√
—
√
—
√
—
√
√
—
—
1
*
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, “MLP Lossless”, and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
You can select these modes by pressing SURROUND. (See page 27.)
2
3
*
*
Continued on the next page
26
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
7 DSP
7 When playing back digital multichannel software (except
• STADIUM
while OFF is selected)
STADIUM mode adds clarity and spreads the sound, like in an
outdoor stadium.
• All Channel Stereo
The appropriate multichannel surround mode (Dolby Digital, DTS
Digital Surround or Linear/Packed PCM) is automatically selected.
All Channel Stereo (ALL ST) mode can reproduce a larger stereo
sound field using all the connected (and activated) speakers.
All Channel Stereo can be used while reproducing 2 channel stereo
source.
7 When playing back a 2 channel source
You can select either Dolby Pro Logic II (MOVIE/MUSIC) or the
DSP mode.
Press SURROUND repeatedly to select the
Normal stereo sound
All Channel Stereo
desired mode.
The surround mode is turned on and the current surround mode
appears on the display window.
Each time you press the button, the surround mode changes.
For details on each mode, see “Available Surround modes for each
input signal”. (See page 26.)
To turn off the surround mode
7 Indicators on the display window
Digital signal format indicators
Press SURROUND repeatedly until “OFF”
appears on the display window.
PPCM:
Lights when DVD AUDIO packed PCM signals
comes in.
Storing adjustments — auto memory
When you turn the power off, the system memorizes the current
surround mode. The memorized mode is automatically recalled
when you turn the power on.
LPCM:
GD:
C:
Lights when Linear PCM signal comes in.
Lights when Dolby Digital signals come in.
Lights when DTS Digital (Surround) signals come
in.
NOTE
No indication: No digital signal indicator lights when analog
signals come in.
• For a down-mixing prohibited DVD AUDIO disc, the system
continues to output multi-channel signals with “MULTI CH” shown
on the display window even if the surround mode is turned off during
playback. On the other hand, the system outputs only the front left
and right channel signals with “LR ONLY” shown on the display
window when you start playback with the surround mode having
been set to “OFF” or “H. PHONE”.
Dolby Surround mode indicator
GPLII:
Lights when Dolby Pro Logic II mode is activated.
Surround indicator
SURR:
Lights when the surround mode is activated.
• For ASF, MPEG-2, MPEG-1 and DivX (except DivX version 6), the
surround mode takes no effects.
Source signal indicators, etc.
Light to indicate the incoming signals.
a: Lights when the left channel signal comes
in.
Using the on-screen bar
You can check disc information and you can use some functions
using the on-screen bar.
b: Lights when the center channel signal comes in.
c: Lights when the right channel signal comes in.
d: Lights when the LFE channel signal comes in.
g: Lights when the surround left channel signal comes in.
i: Lights when the surround right channel signal comes in.
h: Lights when the monaural surround channel signal or 2
channel Dolby Surround signal comes in.
SW (Subwoofer): Always lights.
Showing the on-screen bar
7 Whenever a disc is loaded
Press ON SCREEN.
Each time you press the button, the on-screen bar
changes as follows on the TV screen.
The channel with “ ” shows that the corresponding speakers are
reproducing the channels’ sound.
If the channels’ sound decoded into 5.1 channel is reproduced, only
Example: During DVD VIDEO playback
“
” lights.
Selecting the surround mode
The system is set up to automatically select the optimal surround
mode for input signal from digital multichannel software.
When playing back a 2 channel source, you can select the desired
surround mode manually.
OFF
(The on-screen bar disappears)
IMPORTANT
Before using the remote control for the following
operation;
(back to the beginning)
• Set the remote control mode selector to AUDIO.
• The currently selected item shows green.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
7 Shows playback status.
: appears during playback.
7 Contents of the on-screen bar during playback
DVD VIDEO
/
/
: appears during fast forward/reverse.
: appears during playback in forward slow-motion/
reverse slow-motion.
: appears when paused.
: appears when stopped.
8 Select this to change time information (F). See “Changing the
time information” below.
DVD AUDIO
9 Select this for Repeat Playback. (See page 35.)
0 Select this for time search function. (See page 30.)
K For DVD VIDEO and DVD VR: Select this for chapter search
function. (See page 29.)
For DVD AUDIO: Select this for track search function. (See page
29.)
L Select this to change audio language or channel. (See page 32.)
M Select this to change subtitle language and subpicture. (See page
31.)
VCD
N Select this to change view angle. (See page 31.)
O Select this to change the page. (See page 33.)
P Shows Playback mode status.
PROGRAM: appears during Program Playback. (See page 34.)
RANDOM: appears during Random Playback. (See page 35.)
Q Shows Repeat mode status. (See page 35.)
SVCD
Changing the time information
You can change the time information in the on-
screen bar on the TV screen and the display
window of the center unit.
CD
7 During playback
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
.
DVD VR disc
3 Press ENTER repeatedly to select the
desired information.
Example: When elapsed playing time of disc is selected.
ASF/MPEG-2/MPEG-1/DivX
7 DVD VIDEO/DVD AUDIO/DVD VR
• TIME: Elapsed playing time of current chapter/track
• REM: Remaining time of current chapter/track
• TOTAL: Elapsed time of Title/Group/Program
• T. REM: Remaining time of Title/Group/Program
1 Shows disc type.
7 VCD/SVCD/CD
2 Shows audio information.
• TIME: Elapsed playing time of current track
• REM: Remaining time of current track
• TOTAL: Elapsed time of disc
3 Shows disc number.
4 For DVD VIDEO: Shows current title number.
For DVD AUDIO: Shows current group number.
For DVD VR: Shows current play mode (PG: for Original
program, PL: for Playlist) and title number.
5 For DVD VIDEO and DVD VR: Shows current chapter number.
For other type of discs: Shows current track number.
6 Shows time information. See “Changing the time information”
on the right column.
• T. REM: Remaining time of disc
4 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• When playing back DVD VR, “TIME” and “REM” cannot be shown.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Locating a desired chapter/track using the on-
screen bar
Playing from a specified
position on a disc
You can start playing a title, chapter or track you specify. You can
also play a disc from specified time.
7 During playback
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
Locating a desired scene from the DVD menu
2 Press Cursor 3/2 to highlight
/
.
DVD VIDEOs and DVD AUDIOs generally have their
own menus which show disc contents and you can
display them on the TV screen. You can locate a desired
scene by using these menus.
3 Press ENTER.
Example: During DVD VIDEO playback
7 Whenever a DVD VIDEO or DVD AUDIO is loaded
1 Press TOP MENU/PG or MENU/PL.
The menu appears on the TV screen.
4 Press number buttons (0-9) to enter the
desired chapter number.
Example:
Normally, a DVD VIDEO or DVD AUDIO which contains
more than one title will have a “top” menu which lists the titles.
Press TOP MENU/PG to show the title menu.
Some discs may also have a different menu which is shown by
pressing MENU/PL.
See the instructions for each discs regarding its particular
menu.
To select 8:
Press 8.
To select 10: Press 1, then 0.
To select 20: Press 2, then 0.
To select 37: Press 3, then 7.
To correct a misentry
Repeat step 4.
2 Use Cursor 3/2/Y/5 to select a
desired item.
5 Press ENTER.
3 Press ENTER.
• With some discs, you can also select items by entering the
corresponding number using number buttons.
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• You can select up to the 99th chapter/track.
NOTE
• This feature may not work for some discs.
Locating a desired scene using a VCD/SVCD menu
with PBC
A VCD or SVCD recorded with PBC has its own menus
such as a list of contained songs. You can locate a
specific scene by using these menus.
7 During playback with PBC function
1 Press RETURN repeatedly until the
menu appears on the TV screen.
2 Press number buttons (1-10, h10) to
select the number of the desired item.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 24.)
To return to the menu
Press RETURN repeatedly until the menu screen appears.
When “NEXT” or “PREVIOUS” is shown on the TV screen:
• To go to the next page, press x.
• To return to the previous page, press 4.
NOTE
• If you want to play a PBC-compatible VCD/SVCD without using the
PBC function, perform any of the following:
– Start playback by pressing number buttons while stopped.
– Press x repeatedly until the desired track number is displayed,
then start playback by pressing 3 (play button). The track number
appears on the display window instead of “PBC”.
• To activate the PBC function when playing a PBC-compatible VCD/
SVCD without using the PBC function, perform any of the following:
– Press TOP MENU/PG or MENU/PL.
– Press 7 twice to stop playback, then press 3 (play button).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Locating a desired position by specifying the time
Using the file control display
You can search and play desired groups and tracks/
files using the file control display on the TV
screen.
7 For DVD VIDEO/DVD AUDIO/DVD VR:
During playback
7 For VCD/SVCD: While stopped or during
playback without PBC function
7 For CD: During playback or while stopped
Example: When the source is DVD.
1
Current group/total group
number
Playback mode* (PROGRAM,
RANDOM, REPEAT)
7 When specifying the elapsed playing time from the
beginning of the disc
Perform the following procedure while stopped.
Track information (for MP3/
WMA only)
Elapsed playing time of current
track (except for JPEG)
7 When specifying the elapsed playing time from the
beginning of the current title/track
Perform the following procedure during playback.
2
*
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
4 Use number buttons (0-9) to enter the
time.
Example: To play back from a point 2 (hours): 34 (minutes): 08
Current group
Current track (file)
(seconds) elapsed
Current track (file) / total track (file)
number on current group
Total track (file)
number on disc
Press 2
Press 4
Press 8
Press 3
Press 0
Playback status
1
2
*
(For JPEG/ASF/MPEG-2/MPEG-1/DivX) The Program and
Random mode are not available.
When the source is USB MEMORY, “USB” appears.
*
To cancel a misentry
The file control display appears automatically during playback
(MP3/WMA) or while stopped.
Press Cursor 2 repeatedly.
5 Press ENTER.
7 For MP3/WMA: During playback or while stopped
7 For JPEG/ASF/MPEG-2/MPEG-1/DivX: While stopped
6 Press ON SCREEN.
The on-screen bar disappears.
1 Press Cursor 3/2/Y/5 to select the
desired group/track/file.
2 Press 3 (play button) or ENTER.
• Track playback/slide-show starts from the selected track/file.
• When you press ENTER for JPEG, only the selected file is
played back.
NOTE
• (For MP3/WMA) During playback, you can change the playback
track/file by pressing x/4 or Cursor 5/Y.
• You can also check playback information on the display window. (See
page 22.)
• Some group, track and file names may not be displayed correctly
depending on recording conditions.
• The order of groups, tracks, and files may be displayed differently
from the order displayed on your personal computer.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
NOTE
Resume Playback
• During DVD AUDIO playback, this feature is available only for the
video part.
When Resume Playback is set to “ON” (see page
39) and you stop playback by the following
operations, the position where playback has been
stopped is stored. (The RESUME indicator lights
on the display window.)
Selecting the subtitle
7 During playback of a disc/file containing
• Turning off the power (See page 18.)
• Pressing 7 once
subtitles in several languages
• Changing the source (See page 19.)
When using the SUBTITLE button:
To start playback from the stored position
Press 3 (play button) or corresponding source button (DVD or USB
MEMORY).
• There may be a case when 3 (play button) does not work after
changing the source. In this case, select DVD or USB MEMORY
as a source.
1 Press SUBTITLE.
Example (DVD VIDEO): “ENGLISH” is selected out of 3
subtitle languages recorded.
• Pressing DISC (1-5) (with SHIFT pressed) on the remote control or
DISC (1-5) 3 on the center unit also resumes disc playback.
To clear the stored position
Press 7 again.
2 Press Cursor Y/5 to select the desired
subtitle.
• Opening the disc tray with the playback disc or disconnecting the
USB mass storage class device also clears the stored position.
For DVD VR
• Pressing SUBTITLE activates the subtitles (subpictures)
regardless of whether the subtitles are recorded or not.
(Subpictures will not change if no subpicture is recorded.)
NOTE
• (For DivX) The beginning of a scene where playback has been
stopped may be stored.
For SVCD
• An SVCD can contain up to four subtitles. Pressing SUBTITLE
changes the subtitles regardless of whether the subtitles are
recorded or not. (Subtitles will not change if no subtitle is
recorded.)
Selecting a view angle
7 During playback of a disc containing multi-view
angles
When using the on-screen bar:
1 Press ON SCREEN twice.
When using the ANGLE button:
The on-screen bar appears on the TV screen.
1 Press ANGLE with SHIFT pressed.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
Example: The first view angle is selected out of 3 view angles
recorded.
4 Press Cursor Y/5 repeatedly to select
2 Press ANGLE repeatedly with SHIFT
pressed, or press Cursor Y/5 to select
the desired view angle.
the desired subtitle.
5 Press ENTER.
When using the on-screen bar:
6 Press ON SCREEN.
The on-screen bar disappears.
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
NOTE
• To clear the subtitle, press SUBTITLE. Each time you press SUBTITLE,
subtitle appears and disappears alternately.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 37.)
• During DVD AUDIO playback, this feature is available only for the
video part.
• For DivX, you cannot operate this procedure using the on-screen bar.
4 Press Cursor Y/5 to select the desired
view angle.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Selecting the audio
Special picture playback
7 During playback of a disc/file containing audio
Frame-by-frame playback
in several languages
7 During playback
When using the AUDIO button:
Press 8 repeatedly.
Each time you press the button, the still
picture advances by one frame.
1 Press AUDIO.
Example (DVD VIDEO): “ENGLISH” is selected out of 3 audio
languages recorded.
To return to normal playback
Press 3 (play button).
Playing back in slow-motion
7 During playback
2 Press AUDIO repeatedly or press Cursor
Y/5 to select the desired audio.
1 Press 8 at the point where
you want to start playback
When using the on-screen bar:
in slow-motion from.
1 Press ON SCREEN twice.
The system pauses playback.
The on-screen bar appears on the TV screen.
2 Press SLOW 9.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
Playback in forward slow-motion starts.
For DVD VIDEO/DVD AUDIO only:
• To play back in reverse slow-motion, press SLOW (.
Each time you press the button, the playback speed becomes
faster (1/32, 1/16, 1/8, 1/4, 1/2).
Example: On the TV
4 Press Cursor Y/5 to select the desired
audio.
5 Press ENTER.
To return to normal playback
Press 3 (play button).
6 Press ON SCREEN.
The on-screen bar disappears.
NOTE
• Sound cannot be heard during slow-motion playback.
• During DVD AUDIO playback, this feature is available only for the
video part.
NOTE
• Some subtitle or audio languages are abbreviated in the pop-up
window. See “The language codes list”. (See page 37.)
• “ST”, “L”, or “R” is displayed when playing a VCD respectively
representing “stereo”, “left sound” and “right sound”.
When playing a SVCD, “ST1”, “ST2”, “L1”, “R1”, “L2”, or “R2” is
displayed.
• For DivX, you cannot operate this procedure using the on-screen bar.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Selecting browsable still picture recorded on DVD
AUDIO
Most DVD AUDIOs include browsable still pictures (B.S.P.),
which usually appear by turns automatically during
playback according to the playback sequence. You can
change the picture (turn the page) manually when the current
group/track has selectable pictures (pages).
Changing the VFP setting
The VFP (Video Fine Processor) function enables
you to adjust the picture character according to the
type of programming, picture tone or personal
preference.
7 During playback
1 Press VFP.
7 During playback and while the B.S.P. indicator lights up on the
The current VFP settings appear on the TV screen.
display window
Example:
When using the PAGE button:
Press PAGE repeatedly to select a desired
still picture.
When using the on-screen bar:
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
2 Press Cursor 3/2 repeatedly to select
the VFP mode.
• NORMAL: Normally select this.
• CINEMA: Suitable for movies.
When you select “NORMAL” or “CINEMA”, press VFP to
complete the setting.
• USER 1 and USER 2: You can adjust parameters that affect
picture appearance.
4 Press Cursor 5/Y to select the desired
still picture.
Only when selecting “USER 1” or “USER 2” in step 2, proceed
to perform the following operation;
5 Press ENTER.
3 Press Cursor Y/5 repeatedly to select
6 Press ON SCREEN.
The on-screen bar disappears.
a parameter you want to adjust.
Adjust gradually and confirm picture appearance results are as
preferred.
Zooming in
• GAMMA: Controls brightness of neutral tints while
maintaining brightness of dark and bright portions (–3 to
+3).
7 During playback or while paused
1 Press ZOOM with SHIFT
pressed.
• BRIGHTNESS: Controls screen brightness (–8 to +8).
• CONTRAST: Controls screen contrast (–7 to +7).
• SATURATION: Controls screen color depth (–7 to +7).
• TINT: Controls screen tint (–7 to +7).
Each time you press ZOOM with SHIFT
pressed, scene magnification changes.
• SHARPNESS: Controls screen sharpness (–8 to +8).
2 While zoomed in, press Cursor 3/2/
4 Press ENTER.
Y/5 to move zoom-in area.
Example:
To return to normal playback
Press ZOOM repeatedly with SHIFT pressed, to select ZOOM OFF.
NOTE
• The number of the magnification steps varies depending on the disc
type.
• During slide-show playback of JPEG, zooming in is not available. In
such a case, press 8 to pause slide-show playback, then zoom in.
• During DVD AUDIO playback, this feature is available only for the
video part.
5 Press Cursor Y/5 to change the
setting.
6 Press ENTER.
The current VFP settings appear again.
7 Repeat steps 3 to 6 to adjust other
• During playback, there may be a case where Cursor (3/2/Y/5)
does not work in step 2 above.
parameters.
8 Press VFP.
NOTE
• Although the setting display disappears in the middle of the
procedure, the setting at that time will be stored.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
3 Press 3 (play button).
Program Playback
7 While stopped
If all of the programmed tracks/files have been played back,
playback stops and the program window appears again. Note
that program setting remains.
1 Press PLAY MODE
To check the program contents
During playback, press 7. Playback stops and the program window
repeatedly until program
appears.
window appears on the TV screen.
To quit the Program mode
The PRG indicator lights on the display window.
While stopped, press PLAY MODE repeatedly until both program
window and
disappear from the TV screen.
NOTE
• When the source is USB MEMORY, Program Playback does not
work.
• There may be a case where bonus group on a DVD AUDIO cannot be
played.
• The Resume function cannot be used with Program Playback.
•
DISC (1-5) on the remote control and DISC (1-5) 3 on the center unit
do not work during Program Playback.
• Program Playback may not work for some discs.
2 Follow the instructions that appear on
the TV screen to program the desired
chapters/tracks.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 24.)
• The content’s numbers that you have to specify for
programming varies depending on the disc/file type:
– DVD VIDEO: Titles and chapters
– VCD, SVCD, CD: Tracks
– DVD AUDIO, MP3, WMA: Groups and tracks
• Before you program the tracks in bonus group on a DVD
AUDIO, perform the procedure of “Playing back a bonus
group” (see page 25) to turn off the BONUS indicator on the
display window.
• You can specify the chapters/tracks whose number is up to
99.
• There may be a case that the group or title number can be
entered even for discs that contain no groups or titles. In such
a case, press ENTER to proceed to the Track/Chapter column.
• When you press ENTER instead of the number buttons in the
Track/Chapter column, “ALL” appears and all the tracks or
chapters on the selected group or title are programmed as a
step.
To clear the programs one by one from the last entered
number
Press CANCEL repeatedly.
To clear all programs
Press and hold CANCEL.
You can also clear the program by turning off the system.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Display
window
TV screen
Meanings
Random Playback
Repeats the current group for
DVD AUDIO/MP3/WMA/
JPEG/ASF/MPEG-2/MPEG-1/
DivX.
You can play titles or tracks on a disc in random
order.
REPEAT GROUP
7 While stopped
1 Press PLAY MODE repeatedly until
Repeats the current title for
DVD VIDEO.
appears on the TV screen.
(For DVD VR) Repeats the
current title for Original
program.
The RND indicator lights on the display window.
2 Press 3 (play button).
• When more than one discs are loaded, the system starts
Random Playback of the next disc after completing current
disc playback.
(For DVD VR) Repeats the
current playlist for Playlist.
Repeats all titles and tracks on
the current disc for DVD VR/
VCD/SVCD/CD/MP3/WMA/
JPEG/ASF/MPEG-2/MPEG-1/
DivX.
To quit Random mode
While stopped, press PLAY MODE repeatedly until both program
REPEAT DISC
DISC
ALL
window and
disappear from the TV screen.
You can also clear the Random mode by turning off the system.
NOTE
Repeats all the available discs/
files.
• When the source is USB MEMORY, Random Playback does not
work.
REPEAT ALL
• The same title/track will not be played back more than once during
Random Playback.
,
Repeats the current track for
DVD AUDIO/VCD/SVCD/
CD/MP3/WMA/ASF/MPEG-
2/MPEG-1/DivX.
REPEAT TRACK,
REPEAT STEP
1
Repeat Playback
Repeats the current chapter for
DVD VIDEO/DVD VR.
,
Repeating the current selection or all discs
Repeat mode is off.
The system plays back the disc/
file normally.
No
indication
7 For DVD VIDEO/DVD VR: During playback
7 For VCD/SVCD: During playback without PBC
function or while stopped
7 For DVD AUDIO/CD/MP3/JPEG/ASF/
MPEG-2/MPEG-1/DivX: During playback or
while stopped
NOTE
• When DVD VIDEO or DVD AUDIO is loaded in the system,
playback of the disc next to the DVD VIDEO or DVD AUDIO will
/REPEAT ALL on the TV screen or
ALL in the display window is shown.
• For DVD VIDEO and DVD AUDIO, REPEAT ALL and REPEAT
DISC may not be available depending on the disc.
not start, although
When using the REPEAT button:
Press REPEAT.
When using the on-screen bar (except for MP3/WMA/JPEG/
ASF/MPEG-2/MPEG-1/DivX):
1 Press ON SCREEN twice.
Repeat mode indicator
The on-screen bar appears on the TV screen.
Each time you press REPEAT, the Repeat mode changes.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
4 Press Cursor Y/5 repeatedly to select
the Repeat mode.
5 Press ENTER.
6 Press ON SCREEN.
The on-screen bar disappears.
To cancel Repeat Playback
Select “OFF” in step 4.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 26 for button locations.
Advanced operations
Repeating a desired part [A-B Repeat]
You can repeat playback of a desired part by
specifying the beginning (point A) and ending
(point B).
Tray lock
You can lock the tray and prohibit unwanted disc ejection.
On the center unit ONLY:
7 During playback
7 While the system is turned off
1 Press ON SCREEN twice.
The on-screen bar appears on the TV screen.
2 Press Cursor 3/2 to highlight
3 Press ENTER.
.
Press and hold
• “LOCKED” appears on the display window.
• If you try to eject the disc, “LOCKED” appears to indicate that
the tray is locked.
4 Press Cursor Y/5 repeatedly to select
To cancel
“A-B”.
Carry out the same operation again.
• “UNLOCKED” appears on the display window.
5 Press ENTER at the beginning of the
part you want to repeat (point A).
Setting the sound balance
The repeat mode indicator “
window.
” appears on the display
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
6 Press ENTER at the end of the part you
want to repeat (point B).
The repeat mode indicator on the display window changes to
NOTE
“
” and A-B Repeat Playback starts.
• Before you start operation; There is a time limit when
doing the following steps. If the setting is canceled before you finish,
1staPrtrfreomssstSepE1TagTaiInN. G.
7 Press ON SCREEN.
The on-screen bar disappears.
To cancel
Select “OFF” in step 4, then press ENTER.
NOTE
• When playing back a DVD VIDEO/DVD VR, A-B Repeat Playback is
possible only within the same title.
• “A-B” cannot be selected during Program and Random Playback.
• “A-B” cannot be selected during playback with PBC function.
2 Press Cursor 3/2 to make an
adjustment or selection.
You can adjust the balance of the sound between “R (right)
–21” and “L (left) –21”. To set the balance to normal, select
“CNTR (center)”.
The adjustment is set and the display automatically disappears
a few seconds later.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
NOTE
Using the setup menus
• See the following “The language codes list” for the code of each
language, such as “AA”, etc.
• You can change the language used in the setup menus. See “Menu
description” below.
The language codes list
Basic operation on the setup menus
AA Afar
IK Inupiak
RN Kirundi
IMPORTANT
Before using the remote control for the
following operation;
AB Abkhazian
AF Afrikaans
AM Ameharic
AR Arabic
AS Assamese
AY Aymara
AZ Azerbaijani
BA Bashkir
BE Byelorussian
BG Bulgarian
BH Bihari
BI Bislama
BN Bengali, Bangla
BO Tibetan
BR Breton
CA Catalan
CO Corsican
CS Czech
IN Indonesian
RO Rumanian
RW Kinyarwanda
SA Sanskrit
SD Sindhi
SG Sangho
IS
IW Hebrew
JI Yiddish
Icelandic
1
Set the remote control mode selector
to AUDIO.
JW Javanese
KA Georgian
KK Kazakh
KL Greenlandic
KM Cambodian
KN Kannada
KO Korean (KOR)
KS Kashmiri
KU Kurdish
2
Press DVD or USB MEMORY.
SH Serbo-Croatian
SI
Singhalese
SK Slovak
SL Slovenian
SM Samoan
SN Shona
SO Somali
SQ Albanian
SR Serbian
SS Siswati
ST Sesotho
SU Sundanese
SV Swedish
SW Swahili
TA Tamil
Cursor
(3/2/Y/5)/
ENTER
KY Kirghiz
LA Latin
LN Lingala
LO Laothian
LT Lithuanian
LV Latvian, Lettish
MG Malagasy
MI Maori
MK Macedonian
ML Malayalam
MN Mongolian
MO Moldavian
MR Marathi
MS Malay (MAY)
MT Maltese
MY Burmese
NA Nauru
NE Nepali
NL Dutch
NO Norwegian
OC Occitan
OM (Afan) Oromo
OR Oriya
PA Panjabi
PL Polish
PS Pashto, Pushto
PT Portuguese
QU Quechua
RM Rhaeto-Romance
7 While stopped
CY Welsh
1 Press SET UP.
DA Danish
DZ Bhutani
EL Greek
EO Esperanto
ET Estonian
EU Basque
FA Persian
FI Finnish
FJ Fiji
FO Faroese
FY Frisian
GA Irish
GD Scots Gaelic
GL Galician
GN Guarani
GU Gujarati
HA Hausa
TE Telugu
TG Tajik
TH Thai
TI Tigrinya
TK Turkmen
TL Tagalog
TN Setswana
TO Tonga
TR Turkish
TS Tsonga
TT Tatar
TW Twi
UK Ukrainian
UR Urdu
UZ Uzbek
VI Vietnamese
VO Volapuk
WO Wolof
XH Xhosa
YO Yoruba
ZU Zulu
2 Follow the instructions that appear on
the TV screen.
Menu description
: Language menu (LANGUAGE)
HI Hindi
HR Croatian
HU Hungarian
HY Armenian
IA Interlingua
IE Interlingue
7 MENU LANGUAGE
Some DVDs have their own menus in multiple languages.
• Select the initial language*.
7 AUDIO LANGUAGE
Some DVDs have multiple audio languages.
• Select the initial audio language*.
7 SUBTITLE
Some DVDs have multiple subtitle languages.
• Select the initial subtitle language*.
7 ON SCREEN LANGUAGE
Select the language shown on the TV screen when operating this
system.
* When the language you have selected is not recorded to a disc,
the original language is automatically used as the initial language.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
: Picture menu (PICTURE)
: Audio menu (AUDIO)
7 D. RANGE COMPRESSION
7 MONITOR TYPE
(Dynamic range compression)
You can select the monitor type to match your TV when you play
DVDs recorded in the picture’s height/width ratio of 16:9.
• 16:9/16:9 MULTI (Wide television conversion)
Select this when the aspect ratio of your TV is fixed on 16:9 (wide
TV).
You can enjoy low level recorded sound clearly at night even at a low
volume when listening to the sound with Dolby Digital.
• AUTO
Select this when you want to enjoy surround sound with its full
dynamic range (no effect applied).
• ON
When you play DVDs recorded in the picture’s height/width ratio
of 4:3, the system adjust the ratio of output signal automatically.
• 4:3 LB/4:3 MULTI LB (Letter Box conversion)
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
• 4:3 PS/4:3 MULTI PS (Pan Scan conversion)
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear, however, the left and right edges of the pictures will not
be shown on the screen.
Select this when you want to fully apply the compression effect
(useful at midnight).
NOTE
• When you play a multichannel Dolby Digital source with the
surround mode is off, the setting of D. RANGE COMPRESSION is set
to ON automatically.
: Speaker setting menu (SPK. SETTING)
7 Level menu (LEVEL)
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/CENTER
SPEAKER/SURROUND RIGHT SPEAKER/SURROUND LEFT
SPEAKER
While monitoring the test tone, adjust the center and surround
speakers volume as much as that of the front speakers.
You can adjust the output level in the –6 dB to +6 dB range.
Ex.: 16:9
Ex.: 4:3 LB
Ex.: 4:3 PS
NOTE
• Even if “4:3 PS” or “4:3 MULTI PS” is selected, the screen size may
become “4:3 LB” or “4:3 MULTI LB” with some DVDs. This depends
on how DVDs are recorded.
• When selecting “MULTI” options as the monitor type for the multi-
color system TV, the system outputs PAL or NTSC video signal
according to the disc/file, regardless of the scan mode setting (see
page 20).
TEST TONE*
Outputs the test tone.
* The test tone comes out of all of the activated speakers in the
following sequence:
Front left speaker Z Center speaker Z Front right speaker
Z Surround right speaker Z Surround left speaker Z (back
to the beginning)
7 PICTURE SOURCE
When you set the scan mode to the progressive mode (see page 20),
you can obtain optimal picture quality by selecting whether the
content on the disc/file is processed by frame (film source) or by
field (video source).
NOTE
• For adjustment of subwoofer output level, see page 39.
Normally set to “AUTO”.
• AUTO
7 Delay menu (DELAY)
FRONT LEFT SPEAKER/FRONT RIGHT SPEAKER/CENTER
SPEAKER/SURROUND RIGHT SPEAKER/SURROUND LEFT
SPEAKER
Used to play a disc/file containing both video and film source
materials.
This system recognizes the source type (video or film) of the
current disc/file according to the disc/file information.
If the playback picture is unclear or noisy, or the oblique lines of
the picture are rough, try to change to other modes.
• FILM
Suitable for playing back a film source disc/file.
• VIDEO
Suitable for playing back a video source disc/file.
Adjust the distance from the listening position to the speakers.
Within the range from 0 ms to 15 ms (by 1 ms).
Example:
Center speaker
Subwoofer
1 ms
Front right
Front left
0 ms
7 SCREEN SAVER (See page 23.)
0 ms
You can activate or deactivate screen saver function.
3.0 m
2.7 m
2.4 m
7 FILE TYPE
2.1 m
Surround left
When several types of files are recorded on a disc/device, you can
select which files to play.
2 ms
Surround right
2 ms
• AUDIO
Select this to play MP3/WMA files.
• STILL PICTURE
Select this to play JPEG files.
• VIDEO
1 ms increase (or decrease) in delay time corresponds to about
30 cm decrease (or increase) in distance.
Set to “0 ms” for the furthest speaker from your position as the basis
for the delay time setting.
Select this to play ASF/MPEG-2/MPEG-1/DivX files.
In this case, set the delay time of each speaker as follows;
• Delay time of front speakers: 0 ms
• Delay time of center speaker: 1 ms
• Delay time of surround speakers: 2 ms
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting DVD preferences
7 Subwoofer menu (SUBWOOFER)
: Other setting menu (OTHERS)
LEVEL
You can set the output level of the subwoofer in the –6 dB to +6 dB
range.
7 RESUME
You can activate or deactivate Resume Playback function. (See page
31.)
CROSS OVER
The signals below the preset frequency level will be sent to and be
reproduced by the subwoofer.
7 ON SCREEN GUIDE
Select one of the crossover frequency levels according to the size of
the small speaker connected.
You can activate or deactivate the on-screen guide icons. (See page
22.)
For TH-C60/ Size of the cone speaker unit
For TH-C90
7 DivX registration menu (DivX REGISTRATION)
The system has its own Registration Code for DivX playback.
You can confirm the code of your system.
• Once you play back a disc created by using the Registration Code,
the system’s code is overwritten by a totally different new one for
copyright protection purpose.
TH-C20
built in the speaker
80Hz
100Hz
120Hz
120Hz
8 cm
6 cm
5 cm
150Hz
200Hz
Tuner operations
IMPORTANT
Before using the remote control for the
following operation;
Setting the AM tuner interval
spacing
1
Set the remote control mode selector to
AUDIO.
Some countries space AM stations 9 kHz apart, and some countries
2
Press FM/AM.
use 10 kHz spacing.
You can only change the AM tuner interval spacing while selecting
AM as the band.
The buttons described below are used on pages 39 and 40.
On the center unit ONLY:
7 To change the interval spacing into 10 kHz
Press 8 while holding down 7.
7 To change the interval spacing into 9 kHz
Press 3 while holding down 7.
Manual tuning
Number
buttons
On the remote control:
1 Press FM/AM repeatedly to select the
Remote
control mode
selector
band.
Example: When the system is tuned in to AM 810 kHz.
Cursor
(3/2)
2 Press TUNING 9/( repeatedly until
you find the frequency you want.
When you hold down the button until the system starts
searching for stations and then release it, the system stops
searching automatically when a station of sufficient signal
strength is tuned in to.
On the center unit:
1 Press SOURCE repeatedly to select the
band (FM or AM).
2 Press TUNING +/– repeatedly until you
find the frequency you want.
NOTE
• When an FM stereo program is received, the ST indicator lights on
the display window.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 39 for button locations.
Tuner operations
Preset tuning
Selecting the FM reception
mode
When the stereo FM program currently tuned in is noisy, you can
change the FM reception mode to improve the reception.
Once a station is assigned to a channel number, the station can be
quickly tuned in. You can preset 30 FM and 15 AM stations.
7 To preset the stations
7 While listening to an FM station
1 Tune in the station you want to preset.
Press FM MODE.
• If you want to store the FM reception mode for an FM
station, select the reception mode you want. See “Selecting
the FM reception mode” on the right column.
The FM reception mode appears on the display window.
Each time you press the button, the FM reception mode changes.
• AUTO:
Example: When the system is tuned in to FM 103.50 MHz.
When a program is broadcast in stereo, you will hear stereo
sound. (The ST indicator lights on the display window.) When in
monaural, you will hear monaural sound. This mode is also
useful to suppress static noise between stations.
• MONO:
Reception will be improved although you will lose the stereo
effect. (The MONO indicator lights on the display window.) In
this mode, you will hear noise until you are tuned in to a station.
2 Press MEMORY.
While “CH” and “_ _” are flashing:
Reducing the noise of AM
broadcast
When listening to an AM broadcast with a lot of noise interference,
you can change the Beat Cut mode to reduce the noise.
3 Press number button(s) (1-10, h10) to
select a preset number you want.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 24.)
Example: When the preset channel 1 is selected.
7 While listening to an AM station
Press FM MODE.
The current Beat Cut mode appears on the display window.
Each time you press the button, the Beat Cut mode changes.
• Choose “BEATCUT1” or “BEATCUT2” according to which gives
clearer sound.
If the setting is canceled before you finish, start from step 2
again.
While the selected number is flashing:
4 Press MEMORY.
“STORED” appears on the display window.
The station is assigned to the selected preset number.
If the setting is canceled before you finish, start from step 2
again.
5 Repeat steps 1 to 4.
• Storing a new station to a used number erases the previously
stored one.
7 To tune in to a preset station
1 Press FM/AM repeatedly to select FM or
AM.
2 Press number button(s) (1-10, h10) to
select a preset number.
• For details on using the number buttons, see “How to use the
number buttons”. (See page 24.)
NOTE
• You can also select a preset number by pressing Cursor 3/2.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Karaoke operations
• The icon such as
shows the disc formats or file types the
operation is available for.
Basic Karaoke operations
1 Connect a microphone to
MIC 1 or MIC 2 on the center
unit.
IMPORTANT
Before using the remote control for the following
operation;
• Set the remote control mode selector to AUDIO.
2 Press KARAOKE to activate Karaoke
function.
The buttons described below are used on pages 41 to 43.
The
indicator lights on the display window.
3 Start playback.
• To select audio channels for Karaoke disc (except CD and
MP3/WMA disc), see page 42.
• To enjoy Karaoke with a normal disc (containing no
multiplex audio or multisound Karaoke audio, etc.) by
masking the vocal recorded on the disc, see page 43.
Number
buttons
4 Turn MIC LEVEL to adjust the
Remote
controlmode
selector
microphone’s volume.
• This control adjusts the output volume of both MIC 1 and
MIC 2 together.
5 Sing along with the playback of the
song.
• To add an echo effect to your voice, see page 43.
• To shift the pitch of the playback sound, see page 43.
Cursor
(Y/5)
To turn off Karaoke function
Press KARAOKE so that
disappears from the display window.
To repeat a disc/chapter/title/track during Karaoke mode
Set the Repeat mode. See “Repeat Playback”. (See page 35.)
To enjoy Karaoke using a menu screen
See “Playing from a specified position on a disc”. (See page 29.)
NOTE
• While playback is paused, no sound (voice) through the microphone
is heard from the speakers. When the headphones are connected,
there is a case that the sound (voice) through the microphone comes
out from the headphones though playback is paused.
• Karaoke function is available only when the source is DVD.
• You cannot turn on Karaoke function while playing back a DVD
AUDIO/DVD VR/JPEG/ASF/MPEG-2/MPEG-1/DivX disc.
• Karaoke function will be canceled by following operations;
– Changing the source (See page 19.)
– Playing back a DVD AUDIO/DVD VR/JPEG/ASF/MPEG-2/
MPEG-1/DivX disc
• When Karaoke function is on, the surround mode (see page 26) is
canceled.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 41 for button locations.
Karaoke operations
Reserving songs
Selecting audio
You can reserve your desired songs (groups/titles
and tracks/chapters) to play in the order of your
choice.
Most Karaoke discs have the capability of adding “Guide vocal” or
“Guide melody” to the Karaoke accompaniment.
Up to 12 songs can be reserved with this function.
Selecting audio channel(s) [AUDIO]
7 While stopped with Karaoke function is turned on
With most Karaoke discs, you can select audio
channel(s) among some options called “with guide
vocal”, “with guide melody”, and “accompaniment
only”, etc. to enjoy Karaoke to your preference.
1 Press RESERVE.
The reservation list appears on the TV screen.
2 Press number buttons (0-10, h10) to
select the song you want to reserve by
specifying the disc, group/title, and
7 During playback
1 Press AUDIO.
The following indication appears on the TV screen.
track/chapter numbers.
• Press the number buttons to select a song in the following
order:
Example for a VCD:
1 Select a disc.
2 Select a title/group.
3 Select a chapter/track.
2 Press AUDIO repeatedly or press Cursor
Y/5 repeatedly to select the desired
audio channel.
Each time you press AUDIO, audio channel changes as follows;
Example for a VCD:
• For details on using the number buttons, see “How to use the
number buttons”. (See page 24.)
• ST: To listen to L (left) and R (right) audio channel.
• L: To listen to L (left) audio channel.
• R: To listen to R (right) audio channel.
To erase a reserved song
Press Cursor Y/5 to select the reservation number of unwanted
song, then press CANCEL.
To add a song to the reservation list
Press Cursor Y/5 to select the reservation number of the song
before which you want to insert a new song, then specify a new song
by repeating step 2.
3 Repeat step 2 to reserve the rest of
your selection.
4 Start playback of the reserved songs.
To hide or show the reservation list
Press RESERVE. Each time you press RESERVE, the reservation list
disappears/appears from/on the TV screen.
NOTE
• While the reservation list is not displayed on the TV screen, you
cannot start playback of the reserved songs. Be sure to press RESERVE
to display the reservation list before you start playback.
• You can additionally reserve a song after the current playing reserved
song. In such a case, press 7 and perform the procedure from step 2
through 4.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
See page 41 for button locations.
Karaoke operations
Masking the vocal recorded on a normal disc
[VOCAL MASK]
You can enjoy Karaoke with a normal disc
(containing no multiplex audio or multisound
Karaoke audio, etc.) by attenuating the frequencies
around a human voice with this function.
Shifting the pitch of the
playback sound
You can sharp/flat the pitch of a song recorded on
a disc by a halftone interval to match your voice
range. Note that this setting is applied only to the
current title/track.
7 During playback with Karaoke function turned on
Press VOCAL.
7 During playback with Karaoke function turned on
Each time you press VOCAL, vocal mask function turns on and off
Press KEY i/I repeatedly to adjust the
alternately.
pitch (–6 to +6).
NOTE
• Press KEY ito sharp and KEY Ito flat the pitch.
• The voice may not be masked enough with some discs.
• For DVD VIDEO/VCD/SVCD/CD, the following indication
appears when pressing KEY i/I.
Adding an echo effect to your
voice
7 During playback with Karaoke function turned
• For MP3/WMA, the following indication is shown in the file
on
control display.
.
Press ECHO repeatedly to
select the desired effect level.
“ECHO” and its value appear on the display window.
• Each time you press ECHO, vocal option changes as follows;
To return to normal playback
Select “0” in the procedure above.
OFF Z 1 Z 2 Z 3 Z (back to the beginning)
NOTE
• As the number increases, the effect will be emphasized.
• Depending on the type of the recorded source (such as a DTS Digital
Surround software, etc.), you may not be able to shift the pitch.
To cancel the sound effect
Select “OFF” in the procedure above.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
References
To clean the disc
Wipe the disc with a soft cloth in a straight line
from center to edge.
Maintenance
• DO NOT use any solvent — such as
conventional record cleaner, spray,
thinner or benzine — to clean the disc.
7 Handling Discs
• Remove the disc from its case by holding it at
the edge while pressing the center hole lightly.
• Do not touch the shiny surface of the disc or
bend the disc.
7 Cleaning the system
• Stains on the system should be wiped off with a soft cloth. If the
system is heavily stained, wipe it with a cloth soaked in water-
diluted neutral detergent and wrung well, then wipe clean with a
dry cloth.
• Put the disc back in its case after use to
prevent warping.
• Be careful not to scratch the surface of the disc
when placing it back in its case.
• Avoid exposure to direct sunlight, extreme
temperature and moisture.
• Since the system may deteriorate in quality, become damaged or
get its paint peeled off, be careful about the following.
–DO NOT wipe it with a hard cloth.
–DO NOT wipe it forcefully.
–DO NOT wipe it with thinner or benzine.
–DO NOT apply any volatile substance such as insecticides to it.
–DO NOT allow any rubber or plastic to remain in contact with
it for a long time.
Troubleshooting
PROBLEM
POSSIBLE CAUSE
SOLUTION
Power does not come on. The power cord and/or system cord is not connected.
Connect the power cord and system cord correctly. (See
pages 14 and 15.)
The remote control does The batteries are exhausted.
Replace the batteries. (See page 7.)
not work.
Sunlight is shining directly on the remote sensor.
Hide the remote sensor from direct sunlight.
No sound.
The system cord and/or speaker cord is not connected. Check the connection.
The audio cord is not connected to AUX IN (VCR),
TAPE IN (only for TH-C90) and/or DIGITAL IN (DBS)
correctly.
Connect the cord correctly. (See page 14.)
An incorrect source has been selected.
The video cord is not connected correctly.
The disc or file is not playable.
Select the correct source. (See page 19.)
Connect the cord correctly. (See page 13.)
Use a playable disc or file. (See pages 3 and 4.)
No picture is displayed
on the TV screen.
No picture is displayed
on the TV screen, the
The scan mode is set to the progressive mode
Change the scan mode to the interlace mode
(“NT. 480I” or “PAL. 576I”). (See page 20.)
(“NT. 480P” or “PAL. 576P”) though the center unit is
picture is blurred, or the connected to the TV which does not support the
picture is divided into
two parts.
progressive video input such as a conventional TV.
Video and audio are
distorted.
The disc is scratched or dirty.
Replace or clean the disc.
A VCR is connected between the center unit and the
TV.
Connect the center unit and TV directly. (See page 13.)
The picture does not fit The monitor type is not set correctly.
the TV screen.
Set “MONITOR TYPE” properly. (See page 38.)
The broadcast is hard to Antennas are disconnected.
hear because of noise.
Reconnect the antennas correctly and securely. (See
page 8.)
If there are any other cases than the noted above or if this system does not seem to work properly, turn off the system and turn it back on.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
References
7 Subwoofer (SP-PWC90)
Specifications
Amplifier section
Front/Center/Surround:
140 W per channel, RMS at 4 Ω at
1 kHz, with 10 % total harmonic
distortion.
300 W, RMS at 4 Ω at 40 Hz, with 10 %
total harmonic distortion.
7 Center unit (XV-THC90/XV-THC60/XV-THC20)
Audio section
1
Subwoofer:
Digital input* :
DIGITAL IN (DBS):
(OPTICAL)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital
Surround (with sampling frequency — 32 kHz, 44.1 kHz,
48 kHz)
–21 dBm to –15 dBm
(660 nm E30 nm)
Speaker section
Speaker unit:
Power Handling Capacity: 300 W
Impedance:
Frequency Range:
Sound Pressure Level:
General
1
25 cm Bass-reflex
4 Ω
Analog input:
AUX IN (VCR)
25 Hz to 200 Hz
74 dB/W·m
TAPE IN (Only for XV-THC90)
TAPE OUT (Only for XV-THC90)
Analog output:
Power Requirements:
AC 110 V/ AC 127 V/
Video section
Video System:
Horizontal Resolution:
Signal-to-Noise Ratio:
Video output level
Composite:
AC 220 - 240 V
, 50/60 Hz
PAL/NTSC
500 lines
64 dB
Power Consumption:
Dimensions (W M H M D):
Mass:
110 W (at operation)
0 W (in standby mode)
264 mm M 481 mm M 459 mm
1.0 V(p-p)/75 Ω
1.0 V(p-p)/75 Ω
17.6 kg
S-video-Y:
S-video-C:
For PAL: 0.3 V(p-p)/75 Ω
For NTSC: 0.286 V(p-p)/75 Ω
1.0 V(p-p)/75 Ω
7 Subwoofer (SP-PWC60)
Amplifier section
Front/Center/Surround:
Component-Y:
Component-PB/PR:
Video input sensitivity/Impedance (VCR IN)
0.7 V(p-p)/75 Ω
135 W per channel, RMS at 4 Ω at
1 kHz, with 10 % total harmonic
distortion.
135 W, RMS at 4 Ω at 100 Hz, with
10 % total harmonic distortion.
Composite:
S-video-Y:
S-video-C:
1.0 V(p-p)/75 Ω
1.0 V(p-p)/75 Ω
For PAL: 0.3 V(p-p)/75 Ω
For NTSC: 0.286 V(p-p)/75 Ω
Subwoofer:
Speaker section
Speaker unit:
16 cm Bass-reflex
USB storage
USB specification:
Power Handling Capacity: 140 W
Compatible with the USB 2.0 Full-
Speed
Mass Storage Class
FAT16, FAT32
Max. 500 mA
Impedance:
Frequency Range:
Sound Pressure Level:
4 Ω
30 Hz to 200 Hz
75 dB/W·m
Compatible device:
Compatible file system:
Bus power supply:
General
Power Requirements:
AC 110 V/ AC 127 V/
Tuner section
Tuning Range
FM:
AC 220 - 240 V
, 50/60 Hz
Power Consumption:
Dimensions (W M H M D):
Mass:
135 W (at operation)
0 W (in standby mode)
87.50 MHz to 108.00 MHz
At 10 kHz intervals
530 kHz to 1 710 kHz (*1 600 kHz)
At 9 kHz intervals
531 kHz to 1 710 kHz (*1 602 kHz)
AM:
171 mm M 411 mm M 458 mm
12.3 kg
* For the countries of the Middle East
7 Subwoofer (SP-PWC20)
Amplifier section
Front/Center/Surround:
General
Power Requirements:
Power Consumption:
Dimensions (W M H M D):
Mass:
135 W per channel, RMS at 4 Ω at
1 kHz, with 10 % total harmonic
distortion.
135 W, RMS at 4 Ω at 100 Hz, with
10 % total harmonic distortion.
AC 110 - 240 V
, 50/60 Hz
25 W (at operation)
1.2 W (in standby mode)
Subwoofer:
400 mm M 85 mm M 316 mm
Speaker section
Speaker unit:
Power Handling Capacity: 140 W
Impedance:
3.8 kg
16 cm Bass-reflex
4 Ω
Frequency Range:
Sound Pressure Level:
30 Hz to 200 Hz
74 dB/W·m
General
Power Requirements:
AC 110 V/ AC 127 V/
AC 220 - 240 V
, 50/60 Hz
Power Consumption:
Dimensions (W M H M D):
Mass:
135 W (at operation)
0 W (in standby mode)
170 mm M 411 mm M 458 mm
11.5 kg
45
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Surround speakers (SP-THC60S)
7 Satellite Speakers — SP-XTHC90
Type:
2-way 3-speaker Bass reflex type
Front speakers (SP-THC90F)
Speaker:
5.5 cm cone M 2
Type:
2-way 3-speaker Bass reflex type
3.0 cm dome M 1
(Magnetically shielded Type)
13.5 cm cone M 2
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
Speaker:
4 Ω
6.0 cm cone M 1
100 Hz to 20 000 Hz
79 dB/W·m
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
4 Ω
60 Hz to 20 000 Hz
89 dB/W·m
280 mm M 1 114 mm M 280 mm
Mass:
3.4 kg each
270 mm M 1 027.5 mm M 320 mm
7 Satellite Speakers — SP-XTHC20
Front speakers (SP-THC20F)
Mass:
8.8 kg each
Center speaker (SP-THC90C)
Type:
1-way Bass reflex type
Type:
2-way 3-speaker Bass reflex type
(Magnetically shielded Type)
(Magnetically shielded Type)
10.5 cm cone M 2
Speaker:
8.0 cm cone M 1
Speaker:
Power Handling Capacity: 140 W
4.0 cm cone M 1
Impedance:
Frequency Range:
4 Ω
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
78 dB/W·m
4 Ω
Sound Pressure Level:
Dimensions (W M H M D):
65 Hz to 20 000 Hz
89 dB/W·m
106 mm M 119.5 mm M 102 mm
Mass:
0.55 kg each
400 mm M 141 mm M 171.5 mm
Center speaker (SP-THC20C)
Mass:
3.8 kg
Type:
1-way Bass reflex type
Surround speakers (SP-THC90S)
(Magnetically shielded Type)
Type:
2-way Bass reflex type
Speaker:
8.0 cm cone M 1
Speaker:
10.5 cm cone M 1
Power Handling Capacity: 140 W
4.0 cm cone M 1
Impedance:
Frequency Range:
4 Ω
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
90 Hz to 20 000 Hz
78 dB/W·m
4 Ω
Sound Pressure Level:
Dimensions (W M H M D):
75 Hz to 20 000 Hz
81 dB/W·m
106 mm M 119.5 mm M 102 mm
Mass:
0.55 kg
140 mm M 228.5 mm M 174 mm
Surround speakers (SP-THC20S)
Mass:
1.7 kg each
Type:
1-way Bass reflex type
Speaker:
8.0 cm cone M 1
7 Satellite Speakers — SP-XTHC60
Front speakers (SP-THC60F)
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
Sound Pressure Level:
Dimensions (W M H M D):
4 Ω
Type:
1-way 2-speaker Bass reflex type
90 Hz to 20 000 Hz
76 dB/W·m
(Magnetically shielded Type)
Speaker:
5.5 cm cone M 2
Power Handling Capacity: 140 W
106 mm M 119.5 mm M 102 mm
Impedance:
Frequency Range:
4 Ω
Mass:
0.63 kg each
100 Hz to 20 000 Hz
79 dB/W·m
Sound Pressure Level:
Dimensions (W M H M D):
Designs & specifications are subject to change without notice.
280 mm M 1 106 mm M 280 mm
Mass:
3.3 kg each
Center speaker (SP-THC60C)
Type:
1-way 2-speaker Bass reflex type
(Magnetically shielded Type)
Speaker:
6.5 cm cone M 2
Power Handling Capacity: 140 W
Impedance:
Frequency Range:
4 Ω
90 Hz to 20 000 Hz
82 dB/W·m
Sound Pressure Level:
Dimensions (W M H M D):
250 mm M 85 mm M 91 mm
Mass:
0.8 kg
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Mains (AC) Line Instruction
CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) line voltage
corresponds with the position of the voltage selector switch provided on
the outside of this equipment and, if different, reset the voltage selector
switch, to prevent from a damage or risk of fire/electric shock.
For SP-PWC60/
SP-PWC20
For SP-PWC90
EN
© 2006 Victor Company of Japan, Limited
0706RYMMDWJSC
Download from Www.Somanuals.com. All Manuals Search And Download.
|