LCD Flat Television Users Guide
For Models:
LT-37X688
LT-42X688
LT-42X788
LT-47X788
LT-37XM48
LT-42XM48
Illustration of LT-37X688 and RM-C1450
Important Note:
In the spaces below, enter the model and serial number of your television (located at the
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton
and original packaging for future use.
Model Number:
LCT2275-001B-A
0607TNH-II-IM
Serial Number:
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT RECYCLING INFORMATION
This product has a fluorescent lamp that contains mercury. Disposal
of these materials may be regulated in your community due to
environmental considerations. For disposal or recycling information,
please contact your local authorities or for USA, the Electronic Industries
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
16) Avoid improper installation and never position the unit where good ventilation is impossible.
When installing this TV, distance recommendations must be maintained between the set
and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the
minimum distance guidelines shown for safe operation.
200 mm
200 mm
50 mm
150 mm
150 mm
POWER
17) Cautions for installation
— Do not tilt the TV towards the left or right, or towards the back.
— Install the TV in a corner on the floor so as to keep cords out of the way.
— The TV will generate a slight amount of heat during operation. Ensure that sufficient
space is available around the TV to allow satisfactory cooling.
18) Make enough room for inserting and removing the power plug. Place the TV as close
to the outlet as possible. The main power supply for this TV is controlled by inserting or
removing the power plug.
19) Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
20) When this TV is connected to the wall outlet, it is always on standby even when all the LED
lamps are not lit. To shut down the TV, unplug the TV from the wall outlet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
We have an important note for customers who subscribe to basic cable services (do not have
a separate cable box) and plan to use their JVC TV remote control to select channels.
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is
receiving through the RF input), every channel number available from your cable company
will appear in your television’s Channel Summary and they will all be marked as available for
scanning. Even though every channel is detected and appears as available, you will only be
able to view those that you specifically subscribe to from your cable company. This will likely
mean there are blank channels between those channels you wish to scan or “surf”.
We apologize for any inconvenience this may cause but it is important to note that this is
not a malfunction of your television. If you want to sequentially scan those channels you
subscribe to without blank ones in between, you can contact your cable company for their
cable box and remote.
Avoiding Ghost Images
Displaying fixed images for extended periods of time can leave a subtle but temporary ghost
image on your screen. To avoid this, mix your viewing pattern.
Examples include, but are not limited to the following:
For example...
• Stock-market report bars
• Shopping channel logos and pricing
displays
TV on
TV off
• Video game patterns or scoreboards
• Bright station logos
• Internet web sites or other computer-style
images
• DVD discs, video tapes, laser discs
• Broadcast, cable, satellite channels or
digital television tuners/converters
XYZ
XYZ
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Caring for the Cabinet
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly
moistened with water. You can add a few drops of mild liquid detergent to the water to help
remove spots of oily dirt.
• DO NOT allow liquid to enter the TV through the ventilation slots.
• DO NOT use strong or abrasive cleaners on the TV.
• DO NOT spray liquids or cleaners directly on the TV’s surface.
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.
Caring for the Screen
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.
These will remove the coating layer and cause discolorations.
Do not push or hit the screen. This could cause scratches on the screen surface and image
distortions.
Tidying the cables
A cable holder which keeps your connection cables tidy is attached to the back of the stand.
Note:
• This illustration is for models LT-37X688, LT-42X688, LT-37XM48 and LT-42XM48. The rear
panel for models LT-42X788 and LT-47X788 are slightly different in shape.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings
Disconnecting the stand
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.
This illustration is for models LT-37X688, LT-42X688, LT-37XM48 and LT-42XM48. You can
disconnect the stand for models LT-42X788 and LT-47X788 using the same method.
1) Place the TV face down on a soft cloth on a table.
2) Remove the four screws from the back of the TV.
3) Pull out the stand from the TV.
4) Cover the hole with a bottom cover and tighten the screw.
Note:
• To re-install the stand, reverse the procedure from 4) to 1).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Sound Adjust . . . . . . . . . . . . . 51
Sound Settings . . . . . . . . . . . . . 51
Turn On Volume . . . . . . . . . . . . . 51
Volume Limit . . . . . . . . . . . . . . 52
Reset . . . . . . . . . . . . . . . . . . 52
Clock/Timers . . . . . . . . . . . . . . . . 53
Set Clock . . . . . . . . . . . . . . . . 53
On/Off Timer . . . . . . . . . . . . . . . 54
Photo Viewer . . . . . . . . . . . . . . . . 55
Auto Demo . . . . . . . . . . . . . . . 57
Important Safety Precautions . . 2
Warnings . . . . . . . . . . . . . . . 5
Quick Setup . . . . . . . . . . . . . . 9
Unpacking your TV . . . . . . . . . . . . 9
TV Models . . . . . . . . . . . . . . . . 10
TV Remote Control . . . . . . . . . . . 11
Getting Started . . . . . . . . . . . . . 12
The Remote Control . . . . . . . . . . 12
Connecting Your Devices . . . . . . . 13
Interactive Plug-in Menu . . . . . . . . 22
Button Functions . . . . . . . . . . 58
Power . . . . . . . . . . . . . . . . . . 58
Number Buttons . . . . . . . . . . . . . 58
Tune . . . . . . . . . . . . . . . 58
Sub Channel . . . . . . . . . . . . . 58
Input . . . . . . . . . . . . . . . . . . . 59
Channel +/- . . . . . . . . . . . . . 59
Volume +/- . . . . . . . . . . . . . 59
Return+/TV . . . . . . . . . . . . . . . 59
Sound . . . . . . . . . . . . . . . . . . 60
Muting . . . . . . . . . . . . . . . . . . 60
Video Status . . . . . . . . . . . . . . . 60
Sleep Timer . . . . . . . . . . . . . . . 61
Display . . . . . . . . . . . . . . . . . 61
Aspect . . . . . . . . . . . . . . . . . 62
Menu . . . . . . . . . . . . . . . . . . 63
OK . . . . . . . . . . . . . . . . . . . 63
Back . . . . . . . . . . . . . . . . . . . 63
ML/MTS . . . . . . . . . . . . . . . . . 64
C.C. . . . . . . . . . . . . . . . . . . . 64
Favorite . . . . . . . . . . . . . . . . 65
Guide . . . . . . . . . . . . . . . 65
Mode . . . . . . . . . . . . . . . . . . 66
External device control buttons . . . . . 66
Onscreen Menus . . . . . . . . . 25
Using the Guide . . . . . . . . . . . . . 25
Onscreen Menu System . . . . . . . . . 26
Initial Setup . . . . . . . . . . . . . 29
Noise Muting . . . . . . . . . . . . . . 29
Language . . . . . . . . . . . . . . . . 29
Front Panel Lock . . . . . . . . . . . . 29
V-Chip . . . . . . . . . . . . . . . . . . 30
Set Lock Code . . . . . . . . . . . . . 36
Closed Caption . . . . . . . . . . . . . 37
Auto Shut Off . . . . . . . . . . . . . . 39
Software Version . . . . . . . . . . . . . . 39
Power Indicator . . . . . . . . . . . . . 39
Optical Out . . . . . . . . . . . . . . . . 40
Quick Start-up . . . . . . . . . . . . . . . 40
Tuner Setup . . . . . . . . . . . . . . . . 41
Auto Tuner Setup . . . . . . . . . . . . 41
Channel Summary . . . . . . . . . . . . 42
Find Channel . . . . . . . . . . . . . . . 44
Digital Antenna Level . . . . . . . . . . 44
Tuner Diagnostic . . . . . . . . . . . . . 44
External Input . . . . . . . . . . . . . . 45
HDMI Size . . . . . . . . . . . . . . . . . 45
Video-1 Audio . . . . . . . . . . . . . 45
Video Input Label . . . . . . . . . . . 46
Picture Adjust . . . . . . . . . . . . . 47
Picture Settings . . . . . . . . . . . . . 47
Color Temperature . . . . . . . . . . . . 47
Color Management . . . . . . . . . . . . 48
Dynamic Gamma . . . . . . . . . . . . . 48
Smart Picture . . . . . . . . . . . . . . 48
Digital VNR . . . . . . . . . . . . . . . 49
MPEG NR . . . . . . . . . . . . . . . 49
Natural Cinema . . . . . . . . . . . . . . 49
Position Adjustment . . . . . . . . . . . . 50
Reset . . . . . . . . . . . . . . . . . . 50
Remote Programming . . . . . . 67
OSD Information . . . . . . . . . . 73
Weak Signal . . . . . . . . . . . . . 73
Audio/Data Only Channel . . . . . . . 73
Troubleshooting . . . . . . . . . . 74
Specifications . . . . . . . . . . 76
Warranty . . . . . . . . . . . . . 78
Authorized Service Center . . . 79
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Unpacking your TV
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your
new television, please check to make sure you have all of the following items. In addition to
this guide, your television box should include:
AA Batteries x 2
Remote Control x 1
Television x 1
POWER
TV
STB VCR DVD AUDIO
INPUT
MODE
V1
V2
V3
V4
V5
1
2
5
8
0
3
6
9
4
7
RETURN
TV
+
TUNE
–
CH
+
–
VOL
+
MUTING
OK
Note: Your television
and/or remote
DVR
STATUS
VIDEO
SOUND
GUIDE
SUB CH
TV/VCR
C.C.
SUB T.
DISPLAY
control may differ
from the examples
illustrated here.
SLEEP
ML/MTS
POWER
RTM-CV1450
Cover x 1
Screw x 1
We recommend that before you start using your new television, you read this entire User’s
Guide so you can learn about your new television’s many great features. If you’re anxious to
start using your television right away, a quick setup guide follows on the next few pages.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
TV Models
Before you connect your television to another device, please refer to the proper diagrams for
your specific TV and remote. These will help assist you in understanding how to connect your
television to another device, as well as use the remote to set up your television.
Rear Panel Diagram
SERVICE
INPUT
1
INPUT
2
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
INPUT
3
INPUT
4
INPUT 5
INPUT
AUDIO
OUT
/
1
S-VIDEO
AUDIO
Y
VIDEO
Y
VIDEO
VIDEO
P
B
L
PB
L
L
L
PR
R
PR
R
R
R
INPUT 3
S-VIDEO
INPUT 4
INPUT 5
/ INPUT 1
AUDIO
AUDIO
OUT
Y
VIDEO
Y
VIDEO
VIDEO
PB
L
PB
L
L
L
PR
R
PR
R
R
R
SERVICE
INPUT 1
INPUT 2
75 Ω
(VHF/UHF)
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
Side Panel Diagram
X688 and XM48 series
X788 series
INPUT
MENU
CHANNEL
OK
POWER
VOLUME
BACK
POWER
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Remote Control
POWER
TV
STB VCR DVD AUDIO
INPUT
MODE
V1
V2
V3
V4
V5
1
2
5
8
0
3
6
9
4
7
RETURN +
TV
TUNE
– CH +
– VOL +
MUTING
OK
DVR
STATUS
SOUND
VIDEO
GUIDE
SUB CH
TV/VCR
C.C.
SUB T.
DISPLAY
SLEEP
ML/MTS
RTM-CV1450
RM-C1450
Notes:
• For information on remote control buttons, see pages 58 - 66.
• SUB CHANNEL and GUIDE buttons are for digital channels. If your TV is connected to an
ATSC antenna or Digital Cable, you can use these buttons.
• This remote control is capable of operating many external device brands. See page 67 - 72
for how to program the remote control.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first need
to install the batteries (included).
Raise the latch on the remote's back cover to remove.
Insert two batteries, carefully noting the "+" and "–"
markings. Place the "–" end in the unit first. Snap the
cover back into place.
When you change the batteries, try to complete the
task within three minutes. If you take longer than
three minutes, the remote control codes (ex. VCR,
DVD) may have to be reset. See pages 67 - 72.
POWER
Basic Operation
Turn the television on and off by pressing the POWER button at the top right corner
of the remote. If this is the first time you are turning on the TV, the interactive
plug-in menu appears.
• At first, to watch your TV, select the TV mode by pressing the MODE button on
the remote control before you turn the TV power on.
• See page 58 to 66 for details regarding the remote control buttons.
Using Menu Buttons
To use the menu functions, press the MENU button. Next,
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
OK
DVR
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 2 - Connecting your devices
To make these connections, you will use plugs like the ones illustrated below.
Component Cables
Coaxial Cables
Composite Cables
Audio Cables
Used to connect an external
antenna or cable TV system to your
TV.
Used to connect audio/video
devices like VCRs, DVD players,
stereo amplifiers, game consoles,
etc.
S-Video Cable
Used to make video connections
with S-Video VCRs, Camcorders
and DVD players.
Notes:
• The following connection diagrams are examples.
• After you are finished connecting your devices, plug the power cord into the nearest power
outlet and turn on the TV.
• If you follow these diagrams and the television does not work properly, contact your local
cable operator.
• To connect a DVD player, see VCR Connection.
• If you have a satellite television system, refer to the satellite TV manual.
No VCR Connection
TV Rear Panel
Cable or Antenna
Output
Coaxial Cable
SERVICE
INPUT 1
INPUT 2
75 Ω
(VHF/UHF)
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
VCR • DVD Connection
Notes:
• Green, blue and red are the most common colors for DVD cables. Some models may vary
colors. Please consult the user’s manual for your DVD player for more information.
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete
one set of connections (DVD or audio output) before starting the other to avoid accidentally
switching the cables.
• You may also connect the DVD player to Input 1.
Diagram #1
Cable or Antenna
Output
VCR
IN
R
L
V
IN
OUT
OUT
OR
Coaxial Cable
INPUT 3
INPUT 4
INPUT 5
/ INPUT 1
AUDIO
AUDIO
OUT
S-VIDEO
Y
VIDEO
Y
VIDEO
VIDEO
SERVICE
P
B
R
L
P
P
B
L
L
L
INPUT
1
INPUT
2
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
P
R
R
R
R
R
TV Rear Panel
Green
Blue
Y
P
P
B
Red
R
AUDIO OUT
OUT
R
L
DVD Player
Note:
• If this connection setup does not work for you, try the connection setup on page 15.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Diagram #2
Cable or Antenna
Output
IN
Two-Way Splitter
(Not supplied)
OUT OUT
VCR
IN
R
L
V
IN
OUT
OUT
Coaxial Cable
OR
INPUT 3
INPUT 4
INPUT 5
/ INPUT 1
AUDIO
AUDIO
OUT
S-VIDEO
Y
VIDEO
Y
VIDEO
VIDEO
SERVICE
INPUT
1
INPUT
2
P
B
R
L
P
P
B
R
L
L
L
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
P
R
R
R
R
TV Rear Panel
Green
Blue
Y
P
P
B
Red
R
AUDIO OUT
OUT
DVD Player
R
L
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Camcorder
You can connect a camcorder to your television by using the input jacks located on the back
of the TV.
TV Rear Panel
CAMCORDER
INPUT 3
S-VIDEO
INPUT 4
INPUT 5
/ INPUT 1
AUDIO
AUDIO
OUT
Y
VIDEO
Y
VIDEO
VIDEO
P
B
R
L
P
B
R
L
L
L
P
R
P
R
R
R
1) Connect a yellow composite cable from the camcorder VIDEO OUT to the VIDEO IN on the
back of the TV.
2) Connect a white cable from the camcorder LEFT AUDIO OUT to the LEFT AUDIO IN on the
back of the TV.
3) Connect a red cable from the camcorder RIGHT AUDIO OUT to the RIGHT AUDIO IN on
the back of the TV.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an External Amplifier
TV Rear Panel
Speaker
Speaker
Amplifier
INPUT 3
S-VIDEO
INPUT 4
INPUT 5
/ INPUT 1
AUDIO
AUDIO
OUT
Y
VIDEO
Y
VIDEO
VIDEO
P
B
R
L
P
B
R
L
L
L
P
R
P
R
R
R
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the
LEFT AUDIO INPUT on the amplifier.
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the
RIGHT AUDIO INPUT on the amplifier.
Notes:
• Refer to your amplifier’s manual for more information.
• You can use AUDIO OUTPUT for your home theater system.
• If you have a device connected to INPUT-1 or INPUT-2, you will not be able to hear any
audio from the AUDIO OUT on the back of the TV.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to a Digital TV Receiver
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in
their digital form.
TV Rear Panel
INPUT
3
INPUT
4
INPUT
5
AUDIO
OUT
/
INPUT
1
AUDIO
S-VIDEO
Y
VIDEO
Y
VIDEO
VIDEO
After the connections have been made,
tighten the screw to secure the cables.
P
B
R
L
P
B
L
L
L
P
R
PR
R
R
R
HDMI to DVI Cable
L
R
SERVICE
AUDIO OUT
DIGITAL OUT
INPUT
1
INPUT
2
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
DTV Decoder
TV Rear Panel
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder to
the HDMI INPUT-1 on the back of the TV.
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT to the RIGHT AUDIO INPUT
HDMI AUDIO IN "R" on the back of the TV.
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT to the LEFT AUDIO INPUT
HDMI AUDIO IN "L" on the back of the TV.
• Personal computer compatibility cannot be guaranteed.
• Use an HDMI to DVI cable (commercially available) in order to digitally connect the television
with a DTV decoder.
Notes:
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance
may be slightly shifted. Access the “HDMI Size” in the External Input menu to adjust it. (Refer
to page 45.)
• When you do the above connection, set "Video-1 Audio" in the External Input menu to
"Analog". See "Video-1 Audio", page 45.
• The Analog Audio input can only be used with the HDMI INPUT-1.
• When setting the “Video-1 Audio - Analog/Digital” menu setting on the TV, please note that
this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter this
connection must be made to the HDMI INPUT-1 along with analog audio cables.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an HDMI Compatible Device
By connecting an HDMI compatible device, high definition pictures can be displayed on your
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI
compatible device.
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all
digital audio/video interface. HDMI provides an interface between any audio/video source,
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a
digital television (DTV).
HDMI Cable
HDMI Compatible Device
L
R
AUDIO OUT
DIGITAL OUT
SERVICE
INPUT
1
INPUT
2
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
TV Rear Panel
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device to
the HDMI INPUT-1 on the back of the TV.
Notes:
• When you do the above connection, set "Video-1 Audio" in the External Input menu to Digital.
See "Video-1 Audio", page 45.
• Some decoders may not respond depending on the equipment that is connected to the HDMI.
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to
480p/60Hz), the screen may turn green and there may be some distortion for a short time
until the signal becomes stable.
• This TV can accept 480i, 480p, 720p, 1080i and 1080p signals via HDMI.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an amplifier using your optical output
You can connect an amplifier that has an optical digital input terminal by using an optical digital
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.
SERVICE
INPUT 1
INPUT 2
75 Ω
(VHF/UHF)
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
Amplifier
TV Rear Panel
1) Connect the optical cable from underneath the television to the back of the amplifier.
Notes:
• This terminal can only output digital audio.
• In order to use the optical output connection, select PCM or DOLBY DIGITAL on Optical Out
in the Initial Setup Menu. See page 40.
• Refer to your owners manual on using your amplifier.
• You cannot output sound from your Optical Output connection if the audio source is from
your HDMI device.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Connecting to an AV Receiver using your television's
V3 Smart Input
By connecting your AV Receiver to your television's V3 Smart Input, you can watch picture
sources from many different devices, without having to change or use the other input
connections on your TV. This allows you to free up the other input connections so you can
connect more devices to your television.
TV Rear Panel
AV Receiver
IT 3
SEO
INPUT 4
MONITOR
OUT
Y
Y
IDEO
Y
VIDEO
VIDEO
P
B
P
B
R
L
P
B
R
L
L
L
PR
P
R
P
R
R
R
MONITOR OU
1) Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-3
on the back of the TV.
2) Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO
INPUT-3 on the back of the TV.
3) Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y
VIDEO INPUT-3 on the back of the TV.
4) Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the PB
VIDEO INPUT-3 on the back of the TV.
5) Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the PR
VIDEO INPUT-3 on the back of the TV.
Notes:
• Please refer to your AV Receiver instruction manual for more information on connecting your
speakers and other devices like a DVD player.
• Use your AV Receiver's remote to switch to the different devices you have connected.
• Some AV Receivers may not respond when the V3 Smart Input function is turned on.
• If you have video connections for each input device connected to your AV Receiver, you
should not connect them using both S-Video and Composite connection at the same time
when you are using V3 Input as the V3 Smart Input. In this case we recommend using the
S-Video connection.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Step 3 – The Interactive Plug-in Menu
When you turn your television on for the first time the interactive plug-in menu will appear. The
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:
• The language in which you want the onscreen menus to appear.
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can
choose “Auto” or “Manual” for setting the clock.
• The auto tuner setup of which channels you wish to receive.
We recommend you complete the interactive plug-in items before you start using your
television. After the first time you turn on your TV, you can access the Interactive Plug-In Menu
from the main menu. See page 28.
Note:
• If you press the MENU button while setting up the interactive plug-in menu, it will skip over it.
Language
After the “JVC Interactive Plug-in Menu” has been displayed, the TV automatically switches
to the "Language" settings. You can choose to view your onscreen menus in three languages:
English, French or Spanish.
Language/Langue/Idioma
è
To choose a language:
(English, Français or Español.)
†
To "Set"
English
Press the OK button
Once you press OK, you will move to the
"Set Clock" Plug-in Menu automatically.
Set
OK
Select
Operate
MENUExit
(Continued...)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Clock Set
You may set your clock using the time data sent via broadcasting.
è
†
To choose "Auto (Analog)" or "Auto (Digital)"
To "Channel" when you selected "Auto (Digital)"
Set Clock
Mode
Auto (Analog)
– –
è
†
To select a receiving digital channel
To "Time Zone"
Channel
Time
10
:
30
AM
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
Time Zone
D.S.T.
Atlantic
On
Set
†
è
†
To move to "D.S.T." (Daylight Savings Time)
To turn "On or Off"
To "set"
OK
Select
Operate
BACK Back
MENU Exit
Press the OK button
Once you press OK, you will move to the "Auto
Tuner Setup" Plug-in Menu automatically.
Notes:
• "Channel" can be selected only when Mode is "Auto (Digital)". However, only when you are using
"Auto (Digital)" for the first time, you cannot select "Channel".
• D.S.T. can be used when it is set to "On" in the "Set Clock" menu.
• Only when the Mode is set to "Auto", the Daylight Saving Time feature automatically adjusts your
TV’s clock for Daylight Saving.
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and
receiving conditions. In this case, set your clock manually.
• You will have to reset the clock after a power interruption. You must set the clock before operating
any timer functions.
Manual Clock Set
To set your clock manually, choose "Manual". If you choose "Auto", see auto clock set above.
è
†
To choose "Manual"
To "Time"
Set Clock
è
†
è
†
To set the hour
To minute
To set the minute
To "Time Zone"
Mode
Manual
– –
Channel
Time
10
:
30
Atlantic
On
AM
Time Zone
D.S.T.
Set
è
To select your time zone: (Atlantic, Eastern,
Central, Mountain, Pacific, Alaska or
Hawaii)
OK
Select
Operate
BACK Back
MENU Exit
†
è
†
To move to "D.S.T." (Daylight Savings Time)
To turn "On or Off"
To "Set"
Press the OK button
Once you press OK, you will move to the "Auto
Tuner Setup" Plug-in Menu automatically.
Note:
• You will have to reset the clock after a power interruption. You must set the clock before operating
any timer functions.
(Continued...)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Setup
Auto Tuner Setup
In auto tuner setup, the TV automatically scans through all available channels, memorizing the
active ones and skipping over blank ones or channels with weak signals. This means when you
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.
Auto Tuner Setup
è
To choose "Cable or "Air" (or "Skip" when
you skip "Auto Tuner Setup")
Tuner Mode
Scan Mode
Cable
Auto
π†
è
To Scan Mode
To choose Auto, STD, HRC or IRC
†
To "Start"
Start
Press the OK button
OK
Select
Operate
BACK Back
MENU Exit
Now Programming...
8
When the setup is finished, "Thank you ! Setup is now complete." is displayed. Your quick
setup is now complete. You can now begin watching your television, or you can continue
on in this guide for more information on programming your remote control, or using the
JVC onscreen menu system to customize your television viewing experience.
Notes:
• You can choose Scan Mode only when Tuner Mode is Cable.
• If you want to cancel the Auto Tuner Setup, press the MENU button.
• Noise muting will not work during Auto Tuner Setup.
• If you choose "Skip", it finished without doing the Auto Tuner Setup.
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of
hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
Using the Guide
Certain symbols are used throughout this guide to help you learn about the features of your
new television. The ones you will see most frequently are:
π† Up and Down arrows mean:
• Move vertically in a main menu screen
• Move through a submenu screen
• Move to the next letter, number, or other choice in a submenu
è Left and right arrows mean:
• Select a highlighted menu item
• Select an item in a submenu
• Select numbers in certain menu options
The “press button” icon means you should press the button named on your remote
control. (Button names appear in SMALL CAPITAL LETTERS.)
The “helping arrow” icon points to the highlighted or selected item in a menu.
To bring up the onscreen menu, press the MENU button on the remote control. The following
(left) main menu will appear. The item that appears in orange is the one currently selected.
If you use the MENU button on the TV’s side panel instead of the remote, Front Menu screen
showing "Video Status", "Aspect", "Auto Tuner Setup" and "Menu" will appear (following right
screen).
M e n u
F r o n t M e n u
I n i t i a l S e t u p
T u n e r S e t u p
E x t e r n a l I n p u t
P i c t u r e A d j u s t
S o u n d A d j u s t
–
V i d e o S t a t u s
A s p e c t
A u t o T u n e r S e t u p
M e n u
+
C l o c k / T i m e r s
I n t e r a c t i v e P l u g - i n M e n u
P h o t o V i e w e r
E x i t
A u t o D e m o
Menu Select
Operate
Note:
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen
displays.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
The Onscreen Menu System
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make
adjustments to your television’s operation simply and quickly. All menus are navigated from
the Main Menu at first. Detailed explanations on using each menu follow later in this guide. For
information about the Interactive Plug-in Menu, see pages 22 - 24.
1. To open the onscreen menu system, press the MENU button on the remote control. The
main menu will appear.
M e n u
I
n
i
t
i a
r
l
S
S
e
e
t
t
u
u
p
p
–
+
T u n e
E
P
S
C
I
x
i c
o
l
n t
t
e
t
r
u
n a
r e A d
l
I
n
j
u
p
u
s
u
s
t
t
u
o
n d A d
c
e
j
t
k
r a
o
/
T
c
i
t
i e
m e
v
w
r
s
i
e
P
l
u
g
-
i
n
M e n u
P
h o
t
V
e
r
A u
t
o
D
e
m o
2. To select a menu from the main menu, use the π†arrows and enter by using the √®
arrows or OK button.
The selected feature and option on a menu screen are highlighted in a different color.
To move to a different feature, use the π†arrows to move up and down the list.
3. There are two methods to select an option in a menu, after selecting a menu using the π†
arrows.
1) Use the è arrows to select an option from the highlighted feature. (In this guide, we
discuss this method).
–
+
Tuner Setup > Auto Tuner Setup
2) Press the OK button. The right onscreen will
appear. Use the π†arrows to select an option
from the box and press the OK button.
Tuner Mode
Scan Mode
Cable
Auto
Auto
STD
HRC
IRC
• To go back to the previous screen, press the BACK
button.
Start
OK
BACK Back
MENU Exit
4. Pressing MENU on the remote control will close the
onscreen menu system and return you to normal
television viewing.
Select
Operate
Each menu and its features will be discussed in the following pages of this guide.
Notes:
• If you do not press any buttons for a few seconds, the onscreen menu will automatically
shut off.
• Button names in this guide are shown in SMALL CAPITAL LETTERS.
• Some menu items may not appear in menu screens when certain aspect ratios or inputs
are selected.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
M e n u
I n i t i a l S e t u p
Press the MENU button
The left main menu will appear
–
+
T u n e r S e t u p
E x t e r n a l I n p u t
P i c t u r e A d j u s t
S o u n d A d j u s t
C l o c k / T i m e r s
I n t e r a c t i v e P l u g - i n M e n u
P h o t o V i e w e r
π†
To select a menu from the main menu
To enter
è
The following menu you selected
will appear
A u t o D e m o
Press the BACK button to return to the
previous menu screen
Initial Setup
1/2
Initial Setup
2/2
Noise Muting
Language
On
English
Off
Auto Shut Off
Off
Software Version
Power Indicator
Optical Out
Front Panel Lock
V-Chip
High
PCM
Off
Set Lock Code
Closed Caption
Quick Start-up
Select
Operate
BACK Back
MENU Exit
Select
Operate
BACK Back
MENU Exit
Initial Setup 1/2
Initial Setup 2/2
–
+
Tuner Setup
Auto Tuner Setup
Channel Summary
Find Channel
Digital Antenna Level
Tuner Diagnostic (Service Use Only)
OK
Select
Operate
BACK Back
MENU Exit
Tuner Setup
E
x
t
e
r
n
z
a
e
l
I
n
p
u
t
H
V
V
D
M
I
S
i
A
A
u
u
t
t
o
o
i
d
e
e
o
o
-
1
I
A
p
u
u
d
t
i
o
L
i
d
n
a
b
e
l
Select
Operate
Back Back
Menu Exit
External Input
P
i
c
t
u
e
r
e
A
d
j
u
s
t
1
/
G
3
P
i
c
t
u
r
e
A
d
j
u
s
t
2
/
3
P
i
c
t
u
r
e
C
A
d
j
u
s
t
3
/
3
D
y
n
a
m
i
c
D
y
n
a
m
i
c
D
y
n
a
m
i
c
T
i
n
l
c
i
t
e
t
o
t
g
a
r
[
[
[
[
[
S
0
0
1
0
0
0
]
]
]
]
R
C
C
D
S
D
M
o
o
y
l
l
n
o
o
a
r
r
T e
M
i
P
l
N
m
n
p
e
r
e
m
r
a
t
m
u
e
a
r
e
t
H
A
i
g
h
N
P
a
o
t
s
u
i
r
t
a
i
l
o
i
A
n
d
e
j
m
u
a
s
A
u
t
o
C
P
B
D
E
o
i
r
e
n
r
+
+
6
0
0
6
a
a
g
n
O
O
O
t
n
n
n
o
n
n
t
m
e
n
t
u
h
i
r
t
l
m
t
c
G
t
N
a
u
R
m
e
m
i
a
g
r
i
c
V
+
a
]
i
t
G
a
u
g
y
v
e
r
M
o
d
e
P
E
R
O
R
e
s
e
t
Select
Operate
Back Back
Menu Exit
Select
Operate
Back Back
Menu Exit
Select
Operate
Back Back
Menu Exit
Picture Adjust 1/3
Picture Adjust 2/3
Picture Adjust 3/3
Note:
• The HDMI Size menu can only be displayed when a 480p picture signal is input to the HDMI
terminal and the picture is being displayed on the screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Onscreen Menus
M e n u
Press the MENU button
I n i t i a l S e t u p
T u n e r S e t u p
The left main menu will appear
–
+
E x t e r n a l I n p u t
P i c t u r e A d j u s t
S o u n d A d j u s t
C l o c k / T i m e r s
I n t e r a c t i v e P l u g - i n M e n u
P h o t o V i e w e r
π†
To select a menu from the main menu
To enter
è
The following menu you selected
will appear
A u t o D e m o
Press the BACK button to return to the
previous menu screen
S
o
u
n
d
A
d
j
u
s
t
B
T
B
T
a
r
a
u
o
s
e
l
r
l
s
b
a
n
u
[
[
[
0
0
0
o
0
0
0
l
]
]
]
m
l
n
e
c
O
e
n
V
i
u
t
e
C
u
r
r
e
n
t
V
m
t
e
L
m
i
5
0
R
e
s
e
Select
Operate
Back Back
Menu Exit
Sound Adjust
Clock/Timers
Set Clock
On / Off Timer
OK
Select
Operate
BACK Back
MENU Exit
Clock/Timers
Language/Langue/Idioma
English
Set
OK
Select
Operate
BACK Back
MENU Exit
Interactive Plug-in Menu
Photo Viewer
Device
GZ-MG255
Multi-Screen
Slide Show
Interval Time (sec)
5
OK
Select
Operate
BACK Back
MENU Exit
Photo Viewer
Note:
• For Auto Demo, see page 57.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Noise Muting
This feature inserts a blank black screen over channels which are not broadcasting or are too
weak to be received clearly.
Initial Setup
1/2
Press the MENU button
Noise Muting
Language
On
English
Off
π†
è
π†
è
To "Initial Setup"
To enter
To "Noise Muting"
To turn "On" or "Off"
Press the MENU button when finished
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
Select
Operate
BACK Back
MENU Exit
Note:
• Noise muting will not work when you operate channel summary.
Language
The language function is described on page 22 as the interactive plug-in menu. If you need to
choose the language again, follow the steps below.
Press the MENU button
Initial Setup
1/2
π†
è
π†
To "Initial Setup"
To enter
To "Language"
Noise Muting
On
English
Off
Language
Front Panel Lock
V-Chip
è
To choose a language: English, Français or
Español
Set Lock Code
Closed Caption
Press the MENU button when finished
OK
Select
Operate
BACK Back
MENU Exit
Front Panel Lock
This allows you to lock the keys on the side of the TV, so that a child may not accidentally
change your viewing preferences.
Initial Setup
1/2
Press the MENU button
π†
è
π†
è
To "Initial Setup"
To enter
To "Front Panel Lock"
To turn "On" or "Off"
Press the MENU button when finished
Noise Muting
Language
On
English
Off
Front Panel Lock
V-Chip
Set Lock Code
Closed Caption
Select
Operate
BACK Back
MENU Exit
You can turn off this feature in the following ways:
– Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your
remote control.
– Use the remote control.
– Press the MENU button on the side of the TV for more than 3 seconds. In this case, the OSD
for "Front Panel Lock" will appear.
Note:
• To turn On/Off the TV, press the POWER button on the side of the TV for more than 3
seconds. This feature will remain On.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
V-Chip
Your TV is equipped with V-Chip technology which enables you to block channels or content
that you feel to be inappropriate for children, based on US and Canada rating guidelines.
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set up
V-Chip ratings limits, these programs will not be blocked. See page 35 for information on how
to block unrated programs.
Note (for Canadian viewers): The V-Chip function is based on specifications designed for
the United States and therefore may not work properly in Canada.
You can customize the V-Chip settings of your television to match your personal tastes. The
V-Chip menu below is the starting point for your V-Chip settings.
You can use US V-Chip settings (for programming broadcast from the United States), Canadian
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting
each of the three V-Chip formats appear in the next six pages along with descriptions of the
rating categories.
To access the rating categories:
Initial Setup > V-Chip
Press the MENU button
V-Chip
On
Set US TV Ratings
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will
appear)
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Advanced V-Chip Rating
Advanced Canadian Rating
Unrated
View
Select
Operate
BACK Back
MENU Exit
Enter the password by using the 10 keypad
The V-Chip main screen will appear when the password is correct.
è
To turn V-Chip "On" or "Off" (V-Chip must be turned "On" for rating settings to
operate)
π†
To move to V-Chip menu (see following pages for descriptions of each item)
Notes:
• If you input the wrong password, go back to the Initial Setup Menu.
• To set the password, see "Set Lock Code", page 36.
• "Advanced V-Chip Rating" and "Advanced Canadian Rating" menus may be displayed
sometimes between "Set Canadian Ratings French" and "Unrated". It depends on the
broadcasting if they will be displayed or not.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
US V-Chip Ratings
U.S. PARENTAL RATING SYSTEMS
Programs with the following ratings are appropriate for children.
❒ TV Y is Appropriate for All Children
Programs are created for very young viewers and should be suitable for all ages, including
children ages 2 - 6.
❒ TV Y7 is for Older Children
Most parents would find such programs suitable for children 7 and above. These programs
may contain some mild fantasy violence or comedic violence, which children should be able
to discern from reality.
Programs with the following ratings are designed for the entire audience.
❒ TV G stands for General Audience
Most parents would find these programs suitable for all age groups. They contain little or no
violence, no strong language, and little or no sexual dialog or situations.
❒ TV PG Parental Guidance Suggested
Programs may contain some, but not much, strong language, limited violence, and some
suggestive sexual dialog or situations. It is recommended that parents watch these
programs first, or with their children.
❒ TV 14 Parents Strongly Cautioned
Programs contain some material that may be unsuitable for children under the age of 14
including possible intense violence, sexual situations, strong coarse language, or intensely
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.
❒ TV MA Mature Audiences Only
These programs are specifically for adults and may be unsuitable for anyone under 17
years of age. TV MA programs may have extensive V, S, L, or D.
Viewing Guidelines
In addition to the ratings categories explained above, information on specific kinds of content
are also supplied with the V-Chip rating. These types of content may also be blocked. The
content types are:
• V/FV is for VIOLENCE/FANTASY VIOLENCE
• S stands for SEXUAL CONTENT
• L stands for strong LANGUAGE
• D stands for suggestive DIALOG
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Setting US V-Chip Ratings
Press the MENU button
Initial Setup > V-Chip
V-Chip
On
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will
appear)
Set US TV Ratings
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Advanced V-Chip Rating
Advanced Canadian Rating
Unrated
View
BACK Back
Enter the password by using the 10 keypad
OK
Select
Operate
MENU Exit
The V-Chip main screen will appear
è
π†
è
To turn V-Chip "On" or "Off"
To move to "Set US TV Ratings"
To enter
Directions to set US V-Chip Ratings
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and
press the π† or √® to move the cursor to the correct location. Press OK to turn the locking
feature on or off. An item is locked if the
icon appears instead of a “—”.
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column
is automatically locked.
Set US TV Ratings
π†√® To the TV 14 Column
TV
TV
14
TV
PG
TV
G
TV
Y7
TV
Y
MA
Press the OK button to lock
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
V/FV
Press the MENU button when finished
S
L
D
OK
Select
Operate
BACK Back
MENU Exit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Movies Ratings
❒ NR – Not Rated
This is a film which has no rating. In many cases these films were imported from countries
which do not use the MPAA ratings system. Other NR films may be from amateur producers
who didn’t intend to have their film widely released.
NR (Not Rated) Programming may contain all types of programming including children’s
programming, foreign programs, or adult material.
❒ G – General Audience
In the opinion of the review board, these films contain nothing in the way of sexual content,
violence, or language that would be unsuitable for audiences of any age.
❒ PG – Parental Guidance
Parental Guidance means the movie may contain some contents such as mild violence,
some brief nudity, and strong language. The contents are not deemed intense.
❒
PG-13 – Parents Strongly Cautioned
Parents with children under 13 are cautioned that the content of movies with this rating may
include more explicit sexual, language, and violence content than movies rated PG.
❒ R – Restricted
These films contain material that is explicit in nature and is not recommended for
unsupervised children under the age of 17.
❒ NC-17 – No One Under 17
These movies contain content which most parents would feel is too adult for their children
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit
subject matter.
❒ X – No One under 18
Inappropriate material for anyone under 18.
Directions to set Movie (MPAA) Ratings
Press the MENU button
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will appear)
Enter the password by using the 10 keypad
The V-Chip main screen will appear
To turn V-Chip "On" or "Off"
è
π†
è
To "Set Movie Ratings"
To enter movies menu
For example:
Set Movie Ratings
To block viewing of X and NC-17 rated from shows:
è
è
To the X Column
NC
PG
13
Press the OK button to lock
To the NC-17 Column
X
R
–
PG
–
G
–
NR
–
17
–
–
–
Press the OK button to lock
Press the MENU button to finish
OK
Select
Operate
BACK Back
MENU Exit
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Canadian V-Chip Ratings
❒ E – Exempt
Exempt programming includes: news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
❒ C – Programming Intended for Children
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or
unrealistic in nature.
❒ C8+ – Programming Intended for Children 8 and Over
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low
intensity and will show the consequences of the acts. There will be no offensive language,
nudity or sexual content.
❒ G – General Audience
Programming will contain little violence and will be sensitive to themes which could affect
younger children.
❒ PG – Parental Guidance
Programming intended for a general audience, but which may not be suitable for younger
children. Parents may consider some content not appropriate for children aged 8-13.
❒ 14+ – 14 Years and Older
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and
early teens. Programming may contain mature themes and scenes of intense violence.
❒ 18+ – Adult
Material intended for mature audiences only.
Directions to set Canadian V-Chip Ratings
Press the MENU button
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
To operate (Password input screen will appear)
Enter the password by using the 10 keypad
The V-Chip main screen will appear
To turn V-Chip "On" or "Off"
Set Canadian Ratings English
è
π†
è
To "Set Canadian Ratings English"
To enter ratings menu
18+
–
14+
–
PG
–
G
–
C8+
–
C
–
For example:
To block viewing of programming rated 18+ and 14+:
è
To the 18+ Column
OK
Select
Operate
BACK Back
MENU Exit
Press the OK button to lock
To the 14+ Column
è
Press the OK button to lock
Press the MENU button to finish
Note:
• For instructions on “Set Canadian Ratings French”, please see page 34 in the French user’s
guide.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Unrated Programs
Unrated programming refers to any programming which does not contain a rating signal.
Programming on television stations which do not broadcast rating signals will be placed in the
“Unrated Programming” category.
Examples of Unrated programs:
• Emergency Bulletins
• News
• Public Service Announcements
• Sports
• Locally Originated Programming
• Political Programs
• Religious Programs
• Weather
• Some Commercials
Note:
• TV programs or movies that do not have rating signals will be blocked if the unrated category
is set to "Block".
Directions to Block Unrated Programs
You can block programs that are not rated.
Press the MENU button
Initial Setup > V-Chip
V-Chip
On
π†
è
π†
è
To "Initial Setup"
To enter
To "V-Chip"
Set US TV Ratings
Set Movie Ratings
Set Canadian Ratings English
Set Canadian Ratings French
Advanced V-Chip Rating
Advanced Canadian Rating
Unrated
To operate (Password input screen will appear)
Enter the password by using the 10 keypad
View
Select
Operate
BACK Back
MENU Exit
The V-Chip main screen will appear
è
π†
è
To turn V-Chip "On" or "Off"
To "Unrated"
To select "View" or "Block"
Press MENU when done
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Set Lock Code
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To
change the lock code, follow the steps below.
Press the MENU button
Initial Setup > Set Lock Code
π†
è
π†
è
To "Initial Setup"
To enter
To "Set Lock Code"
To operate (Password input screen will appear)
Lock Code
0
1
2
3
Set
Clear
Enter the password by using the 10 keypad
The Set Lock Code screen will appear
To set the password, use the 10 keypad
OK
Select
Operate
BACK Back
MENU Exit
Press the OK button to finish (your lock code is now set)
When a viewer attempts to watch a blocked channel,
this message appears:
This programming exceeds
your rating limits.
Please enter lock code
by 10 key pad to unlock it.
The channel will remain blocked until the correct lock
code is entered (see above for information on setting
your lock code).
No. - - - -
Notes:
• After a power interruption you must reset the lock code.
• Write your lock code number down and keep it hidden from potential viewers.
Channel Guard Message
When a viewer attempts to watch a guarded channel, the following message appears:
To watch a channel that you have locked, enter the
This channel is locked
by channel guard.
Please enter lock code
Lock Code using the 10 key pad.
If the wrong code is entered, the message "Invalid Lock
Code !” will appear on the screen.
by 10 key pad to unlock it.
No. - - - -
The channel cannot be accessed until the correct code
is entered.
Notes:
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.
• See also “Set Lock Code”.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Closed Caption
Many broadcasts now include an onscreen display of dialog called closed captions. Some
broadcasts may also include displays of additional information in text form. Your television can
access and display this information using the closed caption feature. To activate the closed
caption feature, follow the steps below.
Auto Setting
Initial Setup > Closed Caption
Press the MENU button
Preview
π†
è
π†
è
π†
è
To "Initial Setup"
To enter
To "Closed Caption"
To enter
To "Type"
To select Auto, Advanced or Basic
Closed Caption Sample
Type
Auto
Text1
1
Analog Service
Digital Service
Appearance
Reset
OK
Select
Operate
BACK Back
MENU Exit
Auto: Shows closed caption a priority for
digital channels over analog channels. It is set automatically.
Advanced: Shows only the digital closed caption.
Basic: Shows only the analog closed caption.
π†
è
π†
è
π†
è
è
To "Analog Service"
To select a caption (CC1 to CC4) or text channel (Text1 to Text4)
To "Digital Service"
To select 1, 2, 3, 4, 5 or 6
To "Appearance"
To enter
To select "Auto" ("Manual", see page 38)
Press the MENU button when finished
Notes:
• If you want to reset your settings to the default settings, select "Reset" and press the OK
button.
• If you select "Advanced" for Type, you cannot select "Analog Service".
• If you select "Basic" for Type, you cannot select "Digital Service" and "Appearance".
• "Type", "Digital Service" and "Appearance" are for digital broadcasting. It has no effect for
analog broadcasting.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Manual Setting
Closed Caption > Appearance
Preview
1/2
è
To select "Manual" for Appearance Mode
π†
To "Font Size", "Font Style", "Text/Edge
Opacity", "Background Opacity", "Text Color",
"Edge Color" or "Backgrond Color"
Closed Caption Sample
Appearance Mode
Font Size
Manual
Standard
Auto
Font Style
è
To select the setting you like
Text / Edge Opacity
Background Opacity
Solid
Solid
BACK Back
MENU Exit
Font Size: Auto, Standard, Large or Small
Select
Operate
Font Style: Auto, SerifMono, Serif, SanSerifMono,
Closed Caption > Appearance
Preview
2/2
SanSerif, Casual, Cursive or Small Capital
Text/Edge Opacity, Background Opacity: Auto,
Transparent, Translucent, Solid or Flashing
Closed Caption Sample
Text Color
Edge Color
White
White
Black
Text Color, Edge Color, Background Color: Auto,
White, Black, Red, Green, Blue, Yellow, Magenta, or
Cyan
Background Color
OK
Select
Operate
BACK Back
MENU Exit
Press the MENU button when finished
All fonts are licensed from
Monotype Imaging Inc.
Notes:
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs
may include additional text information which is usually found on text channel Text1. The
other channels are available for future use.
• Closed captioning may not work correctly if the signal being received is weak or if you are
playing a video tape.
• Most broadcasts containing closed captioning will display a notice at the start of the program.
• To select the mode, press the C.C. button. See page 64.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Auto Shut Off
This function automatically shuts off your TV when there is no signal from the channel and no
operation if the TV is on for 10 minutes.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
To "Initial Setup"
To enter
To "Auto Shut Off"
To turn "On" or "Off"
Auto Shut Off
Off
Software Version
Power Indicator
Optical Out
High
PCM
Off
Quick Start-up
Press the MENU button when finished
• If the channel that you have on does not receive a
signal for more than one minute, the blinking text “No
Select
Operate
BACK Back
MENU Exit
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.
Software Version
You can confirm the Software Version.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
To "Initial Setup"
To enter
To "Software Version"
To enter
Auto Shut Off
Software Version
Power Indicator
Optical Out
Off
High
PCM
Off
Quick Start-up
Press the OK button to close
OK
BACK Back
MENU Exit
Press the MENU button when finished
Select
Operate
Power Indicator
Power indicator allows you to adjust the brightness of the power indicator.
Initial Setup
2/2
Press the MENU button
Auto Shut Off
Off
π†
è
π†
è
To "Initial Setup"
To enter
To "Power Indicator"
To turn "High", "Low" or "Off"
Software Version
Power Indicator
Optical Out
High
PCM
Off
Quick Start-up
Press the MENU button when finished
OK
Select
Operate
BACK Back
MENU Exit
Notes :
• When Off is selected :
The LED disappears if you have a TV signal.
The LED is lit as “Low” when there is no TV signal.
• When the On Timer turns On, the LED is lit as "Low" when you turn the power off.
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Optical Out
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,
you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects
digital channels.
Initial Setup
2/2
Press the MENU button
Auto Shut Off
Off
Software Version
Power Indicator
Optical Out
π†
è
To "Initial Setup"
To enter
High
PCM
Off
Quick Start-up
π†
To "Optical Out"
è
To select "PCM" or "DOLBY DIGITAL"
Press the MENU button when finished
Select
Operate
BACK Back
MENU Exit
Notes:
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select
PCM, it cannot output the sound from the speakers.
• For connecting an amplifier using the optical output, see page 20.
• You cannot output sound from your Optical Output connection if the audio source is from your
HDMI device.
Manufactured under license from Dolby Laboratories. "Dolby", and
the double-D symbol are trademarks of Dolby Laboratories.
Quick Start-up
Quick Start-up allows you to lessen the time for the TV to turn on and ready for viewing.
Press the MENU button
Initial Setup
2/2
π†
è
π†
è
To "Initial Setup"
To enter
To "Quick Start-up"
To turn "On" or "Off"
Auto Shut Off
Off
Software Version
Power Indicator
Optical Out
High
PCM
Off
Quick Start-up
Press the MENU button when finished
Select
Operate
BACK Back
MENU Exit
Note:
• Standby power consumption is higher when you have
this feature turned on.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Auto Tuner Setup
The auto tuner setup function is described on page 24 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
–
+
Tuner Setup > Auto Tuner Setup
Press the MENU button
π†
è
π†
è
è
π†
è
†
To "Tuner Setup"
To enter
To "Auto Tuner Setup"
To enter
To choose "Cable" or "Air"
To "Scan Mode"
To choose "Auto", "STD", "HRC" or "IRC"
To "Start"
Tuner Mode
Scan Mode
Air
Auto
Start
BACK Back MENU Exit
Select
Operate
Press the OK button (Programming will take serveral minutes)
The auto tuner is finished when the message "Programming Over !" appears onscreen.
Notes:
• When the Tuner Mode is set to "Cable", it is possible to select "Scan Mode"
• If no channels were found using Auto Tuner Setup, check your antenna cable and the
settings for Tuner Mode/Scan Mode.
• You can also access the "Front Menu" screen by using the MENU button on the side of the TV
instead of the remote control. Choose "Auto Tuner Setup" by pressing MENU
†
on the side
panel and enter by using the CHANNEL +/- (è) buttons.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV. You
can add or delete channels from the line-up or prevent any unauthorized viewers from watching
any or all channels.
Press the MENU button
π†
è
π†
è
To "Tuner Setup"
To enter
To "Channel Summary"
To enter
–
+
Tuner Setup > Channel Summary
Ch No.
001
Scan
Station
FOX
002
ABC
003
CNN
A channel having the Scan mark “√” can be selected
by using CH+/- (channel +/-) button. You can delete
channels from the scan by removing the “√”.
004
005
NBC
BOX
006
NHK
OK
BACK Back
MENU Exit
π†√® To the "Scan" column
Select
Operate
Press the OK button to include or delete from
scan
Press the MENU button when finished
Note:
• The number of a digital channel may change, depending on the time of some broadcastings.
If this channel existed and now has disappeared, the lock channel or scanned channel mark
by the channel summary for that channel will be cancelled.
How to set the channel station.
–
+
Tuner Setup > Channel Summary > Station
Press the MENU button
π†
è
π†
è
è
To "Tuner Setup"
To enter
To "Channel Summary"
To enter
Ch No.
9
Set
Reset
BACK Back MENU Exit
To "Station"
Press the OK button to enter
Select
Operate
è
π†
To select the character you want
To move to the next space
...continue to follow these directions for all seven spaces
To "Set"
π†
Press the OK button
Your characters are now set
Press the MENU button when finished
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Channel Summary (Continued)
If you want to reset the characters you set:
Press the MENU button
π†
è
π†
è
è
To "Tuner Setup"
To enter
To "Channel Summary"
To enter
To "Station"
Press the OK button to enter
To select "Reset"
π†
Press the OK button to finish
Your characters are now reset
Press the MENU button when finished
Notes:
• You can use characters for: Alphabet, numbers, marks and spaces.
• It is possible to set the maximum of 500 channel labels.
• If you try to set more than the 500 maximum, the message "Memory Overflow" will appear.
You can block access to a channel by activating the channel lock.
Press the MENU button
π†
è
π†
è
To "Tuner Setup"
To enter
To "Channel Summary"
To enter
π†√® To the Lock Column (
)
Press the OK button (Password input screen will appear)
Enter the password by using the 10 keypad
Press the OK button to lock or unlock that channel
Press the MENU button when finished
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Setup
Find Channel
Add a digital channel that does not exist in the channel map.
–
+
Press the MENU button
Tuner Setup
π†
è
π†
è
To "Tuner Setup"
To enter
To "Find Channel"
To enter
Auto Tuner Setup
Channel Summary
Find Channel
Find Channel
Digital Antenna
_
Channel Num.
Tuner Diagnosti
Add
Cancel
Add a channel using 0 to 9
Press the OK button to finish
0
9
OK
BACK Back
MENU Exit
...
Select
Operate
Digital Antenna Level
Confirms the present antenna level.
Digital Antenna Level
Press the MENU button
100
BACK
MENU
π†
To "Tuner Setup"
To enter
Back
Exit
è
π†
To "Digital Antenna Level"
To enter
è
Note:
• If you are watching an analog channel, antenna level will not appear.
Tuner Diagnostic (Service Use Only)
Tuner Diagnostic menu is for service use only. It is used to diagnose your TV if there is a
problem.
–
+
Tuner Setup
Press the MENU button
Auto Tuner Setup
π†
To "Tuner Setup"
To enter
Channel Summary
è
Find Channel
Digital Antenna Level
Tuner Diagnostic (Service Use Only)
π†
To "Tuner Diagnostic (Service Use Only)"
To enter
è
OK
Select
Operate
BACK Back
MENU Exit
Note:
• If you are watching an analog channel, Tuner Diagnostic will not appear.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
External Input
HDMI Size
The HDMI Size option can only be selected in the External Input menu when an HDMI 480p
picture signal is being input to the HDMI terminal. This option adjusts the position when an
HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of
HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,
the position can be adjusted by selecting Auto, Size1 or Size2.
E x t e r n a l I n p u t
Press the MENU button
H D M I S i z e
V i d e o - 1 A u d i o
V i d e o I n p u t L a b e l
A u t o
A u t o
π†
è
π†
è
π†
To "External Input"
To enter
To "HDMI Size"
To enter
To select "Auto", "Size1" or "Size2"
Select
Operate
Back Back
Menu Exit
Press the MENU button to finish
Notes:
• The HDMI Size menu can only be selected when an HDMI or DVI 480p picture signal is input
to the HDMI terminal and the picture is being displayed on the screen.
• You can select "Auto" only when the signal is 480p for HDMI. When you select "Auto", the
television will select "Size1" or "Size2" automatically.
Video-1 Audio
This feature is used if you have a DVI or HDMI compatible component connected to your TV.
Press the MENU button
E x t e r n a l I n p u t
π†
è
π†
è
To "External Input"
To enter
To "Video-1 Audio"
To select "Analog", "Digital" or "Auto"
H D M I S i z e
V i d e o - 1 A u d i o
V i d e o I n p u t L a b e l
A u t o
A u t o
Press the Menu button when finished
Select
Operate
Back Back
Menu Exit
Notes:
• If your DVI or HDMI component is capable of digital
audio and video, choose "Digital". If your DVI or HDMI
component is capable of analog audio and digital video, choose "Analog".
• Refer to your DVI or HDMI component’s instruction manual for more information.
• When you select "Auto", the television will select "Analog" or "Digital" automatically, depending
on the audio input from the HDMI.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
External Input
Video Input Label
This function is used to label video input connections for the onscreen displays.
E x t e r n a l I n p u t
Press the MENU button
π†
è
π†
è
π†
è
To "External Input"
To enter
H D M I S i z e
V i d e o - 1 A u d i o
V i d e o I n p u t L a b e l
A u t o
A u t o
To "Video Input Label"
To enter
Select
Operate
Back Back
Menu Exit
To select the desired video input
To select the desired preset input label (see
chart below)
V i d e o I n p u t L a b e l
Press the MENU button when finished
V i d e o - 1
P V R
D V D
S A T
G A M E
V C R
V i d e o - 2
V i d e o - 3
V i d e o - 4
V i d e o - 5
R e s e t
Select
Operate
Back Back
Menu Exit
Preset
Labels
Select when...
VCR
DVD
PVR
You have a VCR connected to the video input
You have a DVD connected to the video input
You have a Personal Video recorder connected to the video input
D-VHS You have a Digital VCR connected to the video input
STB
SAT
AMP
You have a Set-top Box connected to the video input
You have a Satellite Receiver connected to the video input
You have an Amplifier connected to the video input
GAME You have a Video Game connected to the video input
CAM
DISC
You have a Video Camera connected to the video input
You have a Video Disc player connected to the video input
Note:
• To reset to the default setting, π† to select "Reset", then press the OK button.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Picture Settings
These settings allow you to change and adjust the way the picture appears on your television.
Tint
Tint allows you to adjust the levels of red and green in your TV picture.
Color
The color function lets you make all the colors in the TV picture appear either more vivid or
subtle.
Picture
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker
or brighter picture overall.
Bright
You can adjust the overall brightness of the TV picture with the Bright control.
Detail
The Detail feature adjusts the level of fine detail displayed in the picture.
Energy Saver Mode
The energy saver mode adjusts the level of back light brightness on the TV screen.
Adjust the Picture Settings
P i c t u r e A d j u s t
1 / 3
Press the MENU button
D y n a m i c
π†
è
π†
To "Picture Adjust"
To enter
To "Tint", "Color", "Picture", "Bright", "Detail" or
"Energy Saver Mode"
T i n t
C o l o r
P i c t u r e [ + 1 0
B r i g h t 0 0
D e t a i l [ + 0 6
E n e r g y S a v e r M o d e
[
0 0
]
]
]
]
R
G
[ + 0 6
[
]
√ ®
To enter
T i n t
0 0
Select
Operate
Back Back
Menu Exit
R
G
√ ®
π†
To adjust the setting
To move to the next setting
Press the MENU button when finished
Color Temperature
You can decide how strong or dull the colors appear on the TV screen.
Press the MENU button
C o l o r T e m p e r a t u r e
L o w
H i g h
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Color Temperature"
To enter
To set "Low" or "High"
Press the MENU button when finished
Note:
• If you are receiving a 1080i or 720p digital channel in it's original format, you can adjust the
Picture Settings and Color Temperature independently from all the other channels.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Color Management
This TV supports the Color Management function to ensure dull colors are compensated to
produce natural hues.
Press the MENU button
C o l o r M a n a g e m e n t
O n
O f f
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Color Management"
To enter
To set "On" or "Off"
Press the MENU button when finished
Dynamic Gamma
JVC's Dynamic Gamma Circuitry (DGC) makes it easier to see dark areas when a picture has
many dark areas, and makes it easier to see the bright areas when a picture has many bright
areas. DGC is turned on, DGC analyzes and adjusts the total level
of picture brightness balance, especially in dark areas where the
level of grayscale is often lost, turning completely to black DGC
automatically enhances the detail in these dark areas providing
D y n a m i c G a m m a
O n
O f f
a more dynamic image with finer detail, so the optimum picture
settings are automatically set for each picture. Normally use with
DGC on.
Press the MENU button
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Dynamic Gamma"
To enter
To set "On" or "Off"
Press the MENU button when finished
Smart Picture
Smart Picture detects the APL (Average Picture Level) and adjusts the contrast suitable for
what you are watching.
Press the MENU button
S m a r t P i c t u r e
O n
O f f
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Smart Picture"
To enter
To set "On" or "Off"
Press the MENU button when finished
Note:
• When you have "Dynamic" selected in the "Video Status", Smart Picture is not selected.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Digital VNR
This function can be selected to change the effect of Digital VNR.
Press the MENU button
D i g i t a l V N R
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Digital VNR"
To enter
A u t o
M i n
M a x
O f f
To select the effect you like.
Auto: adjusts the effect of VNR automatically.
Min: adjusts the effect of VNR to minimum.
Max: adjusts the effect of VNR to maximum.
Off: turns the effect of VNR off.
Press the MENU button when finished
MPEG NR
This function blocks noise removal and mosquito NR simultaneously.
Press the MENU button
M P E G N R
O n
π†
è
π†
è
π†
To "Picture Adjust"
To enter
O f f
To "MPEG NR"
To enter
To select "On" or "Off"
Press the MENU button when finished
Natural Cinema
Natural cinema corrects the problem of blurred edges which may occur when viewing a program
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges
of these programs, choose "Natural Cinema" and set it to "Auto". Natural Cinema helps correct
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the
television rate of 30 frames-per-second.
Press the MENU button
N a t u r a l C i n e m a
A u t o
O f f
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Natural Cinema"
To enter
To select the mode "Auto" or "Off”
Press the MENU button when finished
Note:
• Natural Cinema is only applied for SD 480i and HD 1080i signals.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjust
Position Adjustment
Position adjustment allows you to adjust the position of the picture.
Press the MENU button
π†
è
π†
è
π†
To "Picture Adjust"
To enter
To "Position Adjustment"
To enter
To adjust the position
Press the MENU button to finish
Operate
OK Reset
Back Back
Menu Exit
Notes:
• To reset the adjustment to the center, press the OK button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select Regular, Slim, Full or Full Native size with aspect, position adjustment option is
not selectable.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position horizontally when the aspect is
set Panorama Zoom or Cinema Zoom for 1080i and 720p signals.
• When you are receiving a 1080p signal, Position Adjustment can not be selected.
Reset
Reset resets all picture adjustments at once to the default settings.
Press the MENU button
P i c t u r e A d j u s t
3 / 3
π†
è
π†
To "Picture Adjust"
To enter
To "Reset"
D y n a m i c
N a t u r a l C i n e m a
P o s i t i o n A d j u s t m e n t
H i g h
Press the OK button
R e s e t
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the picture adjustments except for
Natural Cinema and Position Adjustment.
Select
OK
Operate
Back Back
Menu Exit
Press the MENU button when finished
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Sound Settings
These settings allow you to change and adjust the sound on your television.
Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with
the bass adjustment.
Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance
setting.
Adjust the Sound Settings
S o u n d A d j u s t
Press the MENU button
π†
è
π†
√ ®
π†
To "Sound Adjust"
To enter
To "Bass", "Treble" or "Balance"
To adjust the setting
To move to the next setting
B a s s
T r e b l e
B a l a n c e [ 0 0
T u r n O n V o l u m e
V o l u m e L i m i t
[
[
0 0
0 0
]
]
]
C u r r e n t
5 0
R e s e t
Select
Operate
Back Back
Menu Exit
Press the MENU button when finished
Note:
• You can reset all sound adjustments you set at once as the default setting when you select
reset. See page 52.
Turn On Volume
Turn On Volume allows you to set the volume level when you turn the TV on.
Press the MENU button
S o u n d A d j u s t
π†
è
π†
è
To "Sound Adjust"
To enter
To "Turn On Volume"
To set the volume level
B a s s
T r e b l e
B a l a n c e[ 0 0
T u r n O n V o l u m e
V o l u m e L i m i t
[
[
0 0
0 0
]
]
]
C u r r e n t
5 0
R e s e t
Current
00
01
02
03
Select
Operate
Back Back
Menu Exit
50
49
48
Press the MENU button to finish
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjust
Volume Limit
Volume Limit allows you to set the maximum volume level.
Press the MENU button
S o u n d A d j u s t
π†
è
π†
è
To "Sound Adjust"
To enter
To "Volume Limit"
To set the maximum volume level
B a s s
T r e b l e
B a l a n c e [ 0 0
T u r n O n V o l u m e
V o l u m e L i m i t
[
[
0 0
0 0
]
]
]
C u r r e n t
5 0
R e s e t
00
01
02
48
49
50
Select
Operate
Back Back
Menu Exit
Press the MENU button to finish
Reset
Reset resets all sound adjustments at once to the default settings.
Press the MENU button
S o u n d A d j u s t
π†
è
π†
To "Sound Adjust"
To enter
To "Reset"
B a s s
T r e b l e
B a l a n c e [ 0 0
T u r n O n V o l u m e
V o l u m e L i m i t
[
[
0 0
0 0
]
]
]
C u r r e n t
5 0
Press the OK button
R e s e t
The onscreen menu disappears for a moment,
and then the settings are reset to the default
setting for all the sound adjustments.
Select
OK
Operate
Back Back
Menu Exit
Press the MENU button when finished
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
Set Clock
The set clock function is described on page 23 as the Interactive Plug-in Menu. You can choose
to set the clock automatically, or manually. If you need to set the clock again, follow the steps
below.
Press the MENU button
π†
è
π†
è
To "Clock/Timers"
To enter
To "Set Clock"
To enter
When you set the clock automatically, choose "Auto (Digital)" or "Auto (Analog)" by
pressing the
√
or
®
arrows.
Clock/Timers > Set Clock
π†
è
π†
è
To "Channel" when you selected "Auto (Digital)"
To select a receiving digital channel
To "Time Zone"
Mode
Auto (Analog)
– –
Channel
Time
10
:
30
AM
Time Zone
D.S.T.
Atlantic
On
To select your time zone
Start Clock
Atlantic
Eastern
Central
Mountain
Pacific
OK
Select
Operate
BACK Back
MENU Exit
Hawaii
Alaska
π†
è
†
To "D.S.T." (daylight savings time)
To turn D.S.T. "On" or "Off"
To "Start Clock"
Press the OK button
Press the MENU button when finished
When you set the clock manually, choose "Manual" by pressing the
√
or
®
arrows.
π†
è
π†
è
π†
è
To move to the hour
To set the hour
To move to minutes
To set the minutes
To "Time Zone"
Clock/Timers > Set Clock
Mode
Manual
Channel
Time
– –
30
10
:
AM
Time Zone
D.S.T.
Atlantic
On
To select your time zone:
Start Clock
Atlantic
Eastern
Central
Mountain
Pacific
OK
Select
Operate
BACK Back
MENU Exit
Hawaii
Alaska
π†
è
†
To "D.S.T." (daylight savings time)
To turn D.S.T. "On" or "Off"
To "Start Clock"
Press the OK button
"Thank you !" will be displayed.
Press the MENU button when finished
Notes:
• "Channel" can be selected only when Mode is "Auto (Digital)".
• D.S.T. can be used only for US and Canada when it is set to "On" in the "Set Clock" menu.
• Only when the Mode is set to Auto, the Daylight Saving Time feature automatically adjusts
your TV’s clock for Daylight Saving.
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and
receiving conditions. In this case, set your clock manually.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock/Timers
On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you’re not
home.
Clock/Timers > On / Off Timer
Press the MENU button
Mode
Once
30
On Time
Off Time
Channel
On Volume
10
11
:
:
AM
AM
π†
è
π†
è
è
To "Clock/Timers"
30
3
Current
To enter
To "On/Off Timer"
Set
OK
Select
Operate
BACK Back
MENU Exit
To enter (begins with "Mode")
To choose "Once", "Everyday" or "No"
π†
è
π†
è
π†
To "On Time"
To set the hour (AM/PM) you want the TV to turn on
To move to minutes
To set the minutes
To accept "On Time" and move to "Off Time" (the time the TV will turn off). Set the
"Off Time" the same way as "On Time"
π†
è
π†
è
π†
To accept "Off Time" and move to "Channel"
To select channel
To "On Volume"
To set the volume level
To "Set"
Press the OK button
Press the MENU button to exit the menu
Notes:
• The on/off time cannot be set to locked channels in the channel summary menu.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
• If your clock is not set, "Please set clock first !" will appear on the screen. Please see
Manual Set Clock on page 53 to set the clock.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Viewer
Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class
devices. You are able to view them on this TV as high quality images.
How to start the Photo Viewer
1) Turn the power off on the device containing your photos.
2) Switch to "PHOTO" mode if your device has a mode switch (VIDEO/PHOTO).
3) Turn on your device containing your photos and switch to play mode to view the photos.
4) Connect your device to the Photo Viewer Terminal on this TV by using a USB cable.
JVC Everio Camera (Example)
TV Rear Panel
SERVICE
INPUT
1
INPUT
2
75
Ω
PHOTO
VIEWER
DIGITAL AUDIO
OPTICAL OUT
(VHF/UHF)
USB Cable
5) The TV screen will display a "hourglass" icon and then display the Photo Viewer Screen.
For "Multi Screen" and "Slide Show", see page 56 and 57.
Photo Viewer
Device
GZ-MG255
Multi-Screen
Slide Show
Interval Time (sec)
5
OK
Select
Operate
BACK Back
MENU Exit
6) Select a camcorder's device from "Device" by using the è buttons.
How to finish the Photo Viewer
Press the MENU button when finished
Press the POWER button on remote control to turn the power off
Disconnect the USB cable
Notes:
• Use the supplied USB cable that came with your device. Do not use HUB or USB extension
cable.
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. In this
case, the message, "There is no photo to be displayed" will appear when you start the "How
to start the Photo Viewer". It may take some time to display or it may not display correctly.
• When your device that you are connecting to the TV is composed of two or more Mass
Storage devices, you can select from two Mass Storage devices. Selected Mass Storage
device depends on the model.
notes regarding your devices you wish to connect.
• Compatible file format is "Exif version 2.1, based on DCF version 1.0".
• Supported file formats are ".jpg" or ".JPG".
• Maximum number of files that can be displayed is 9999.
• Photos with less than 120 x 120 pixels and more than 16383 x 16383 pixels cannot be
displayed.
• All your stored data should be backed up first as a precaution before connecting to the TV.
• Depending on your stored file size, it can take extra time to display "Photo Viewer" page.
• It may take extra time to display the photo full screen, depending on the file size.
• "Device" can only be selected when you have two or more devices connected to the TV.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Viewer
Multi Screen
Multi Screen allows you to display JPEG images that are in your digital still camera or external
USB Mass Storage Class memory as "thumbnails" .
Multi Screen
1/2
Photo Viewer
π†
è
To "Multi Screen"
To enter
Date: Jan/01/04 Dimensions: 640x430
The thumbnail appears
101-0001
101-0002
101-0004
101-0003
√®π† To select an image
Press OK if you want to display a single
101-0005
Select
101-0006
101-0007
101-0008
image
OK
Operate
BACK Back
MENU Exit
Press the DISPLAY Button
The following image appears. You can look at the pictures by using your remote
control buttons.
1
4
7
2
3
6
9
8
5
Reset
+
–
Prev.
Next
VOLUME
–
+
Rotate
Back
Exit
BACK
MENU
π
button: Zooms in the image
When the image is zoomed in, you can move the image in all directions
using the 10-key pad on your remote. To reset the position, press the 5
button.
†
√
®
button: Zooms out the image
button: To previous image
button: To next image
VOL+: Rotates the image 90º clockwise
VOL-: Rotates the image 90º counterclockwise
DISPLAY: Displays information. With each press of the DISPLAY button, you can
display the picture's information.
BACK: Returns to the thumbnail screen
MENU: Exit
Notes:
• When Multi Screen has more than one screen, if you press the page number using the 10-
key pad on your remote, you will skip to that specific page.
• Although the image has been rotated, this change is not saved to the USB memory.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Photo Viewer
Slide Show
Slide Show allows you to display the images in order.
π†
è
To "Slide Show"
To enter
The Slide Show starts
Press the BACK button to stop the Slide Show
Notes:
• To pause the Slide Show, press the OK button. To unpause, press the OK button again.
• When you set the Interval Time (seconds), the image will change automatically to the next
image. By default, it is 5 seconds.
• Slide Show may take extra time more than setting the Interval Time, depending on the file
size.
• If the USB cable is disconnected or your USB device is turned off while the Photo Viewer is
working, your device may not be recognized. In this case, turn Quick Start-up Off, turn the
TV off and turn the TV back on.
Interval Time
You can set the time to change to the next image for the Slide Show. When you set the time
using the è button, the image change to the next image automatically. When you have set
it to "Manual", you can change the image to the next image by using the è buttons.
Note:
• It may take some extra time to move to the next image depending on the size of your JPEG
images.
Auto Demo
Auto Demo
Auto Demo explains this TV's features to you. This Auto Demo mode is set to be On by
default until you turn it Off.
Notes:
• Please complete the Interactive Plug-in Menu first. The Auto Demo mode will start
automatically when the Interactive Plug-in Menu is completed.
• If you press any button on the television or remote, with the exception of POWER or MENU, the
Auto Demo mode will stop for 30 seconds. After 30 seconds have passed with no operation,
the Auto Demo mode will start again.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Power
Turns the TV on or off.
Press the POWER button
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
1 (ONE)
2 (TWO)
Tune
Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the TUNE button. For example, to move to channel 12:
1 (ONE)
2 (TWO)
Press the TUNE button
Sub Channel
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH
button, you can select a sub channel easily.
To watch sub channels
Press the MODE button to select TV
For example, to move to sub channel 123-45:
Press 1, 2 and 3 in order
Press the SUB CH button
Press 4 and 5 in order
Press the TUNE button
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Input
Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like
VCRs, DVD players, or camcorders.
Press the V1, V2, V3, V4 or V5 button
Notes:
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad or CHANNEL
+/- button.
• You can also access by pressing the INPUT button on the side of the TV instead of the remote.
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or
CH–.
Volume +/–
Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in
Volume Limit. See page 52.
Return +/TV
The Return+/TV button has three functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the RETURN+/TV and hold for three seconds
Return Channel (123-456)
Programmed !
The channel currently active has been programmed as your return+ channel. Now scan
through the channels using the CHANNEL+/- buttons.
Press the RETURN+/TV
You will return to your programmed channel.
• To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.
The message “Return Channel Cancelled !” will appear.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sound
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) and
Smart Sound on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
effect.
Smart Sound - Decreases high sound levels, giving a regulated sound level.
Press the SOUND button
S o u n d E f f e c t
A . H . S .
S m a r t S o u n d
O f f
O f f
π†
è
To select "A.H.S." or "Smart Sound"
To choose the setting
Press the MENU when finished
Select
Operate
Menu Exit
Note:
• Smart Sound may become an unnatural effect, depending on the signal source.
Muting
The MUTING button instantly turns the volume down completely when you press it. Press
MUTING and the volume level will instantly go to zero. To restore the volume to its previous
level, press MUTING again.
Video Status
The Video Status button gives you a choice of four TV picture display settings, including a
display of your own preferences.
Standard - Resets the picture display to the factory settings.
V i d e o S t a t u s
S t a n d a r d
D y n a m i c
T h e a t e r
Dynamic - Gives a vivid picture with better contrast when viewing in
a brightly lit room.
Theater - Gives a rich, film-like look to video when viewing in a
dimly lit room.
G a m e
Game - Used for when you are playing video games connected to
your TV.
Press the VIDEO STATUS button
By every press of the VIDEO STATUS button, you change the mode.
Notes:
• You can also change the mode by pressing the π† buttons.
• Each mode is memorized for each input connected to the TV.
• You can also access the "Front Menu" screen by using the MENU button on the side of the
TV instead of the remote control. Choose "Video Status" by pressing MENU
panel and enter by using the CHANNEL +/- (è) buttons. Next, select a mode by pressing
the MENU button.
†
on the side
†
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Sleep Timer
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total
time of up to 180 minutes. When you press the SLEEP button once, the rest of the time will be
displayed.
S l e e p T i m e r
0
m i n .
Press the MODE button to select TV
Press the SLEEP button twice
1 5 m i n .
3 0 m i n .
4 5 m i n .
6 0 m i n .
9 0 m i n .
1 2 0 m i n .
1 8 0 m i n .
By every press of the SLEEP button, you select the time for
the timer to shut off
This message will appear 60 seconds before the automatic shutoff
occurs:
Good Night !
Push [SLEEP TIMER] button
to extend.
You then have 60 seconds to press the SLEEP button to delay the shut off.
Note:
• You can also select the timer by pressing the π† buttons.
Display
The display screen shows the current information as follows.
Press the MODE button to select TV
Press the DISPLAY button
Detailed mode
Clock Mode
Simple Mode
Off
• Detailed Mode - Shows the channel, channel name, signal, rating information, current time,
digital antenna level and scramble information, as well as the current time below.
(( )) (( ))
Dolby Digital
TV PG
D L
S
V
NR
108-1
o
S
HD1080i CC
WEWEWEW
11:00PM - 11:30PM Football fun meeting
10:15PM
• Clock Mode - Shows the current time.
108-1
• Simple Mode - Shows the current channel and channel name or AV input.
• Off - Turns the display off.
WEWEWEW
Notes:
• You may also turn off the display at any step by pressing MENU.
• If the clock is not set, "Clock not set" will be displayed.
• A signal being shown in Detailed Mode, will only show the kind of input and video signal you
are receiving. However, the actual signal type you see will be different.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect
This feature will help you adjust the picture you are watching to give you the best possible
picture quality.
Aspect Ratios
Panorama - With this ratio a normal
4:3 aspect picture is stretched to fit the
dimensions of the 16:9 aspect screen.
Regular - The regular ratio is used when
you want to watch a 4:3 broadcast or
recorded program without modifying the
original picture to fit the dimensions of your
16:9 screen. The 4:3 picture will fill the
screen from top to bottom, while black bars
will appear to fill up the remaining space
along the picture’s sides. The 4:3 picture
will be centered within the boundaries of the
16:9 screen.
Cinema - This ratio “zooms in” on the
center part of a 4:3 aspect picture, blowing
it up to fill the 16:9 screen.
Slim - This aspect mode shrinks the
screen of 16:9 to 4:3. There are some
programming that is already stretched by
mistake at broadcasting companies, so
this mode corrects it. Black side bars will
appear.
Full - This is the ratio to use when watching
16:9 High-Definition broadcasts.
Panorama Zoom - This ratio stretches
the High-Definition 16:9 aspect image to
eliminate the black side bars.
Full Native - This ratio displays 100% of the
ratio. Normally, all aspects except for Full
Native display about 95%.
Cinema Zoom - This ratio stretches the
High-Definition 16:9 aspect image to
eliminate the black surrounding bars.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Aspect Ratios (Continued)
Press the ASPECT button
• By pressing the ASPECT button, you can change the size.
When you change the aspect ratios, it is different from their broadcast or recorded program.
ATSC (480i, 480p)
NTSC (480i, 480p)
SD (480i, 480p)
ATSC (720p)
HD (720p)
ATSC (1080i)
HD (1080i)
A s p e c t
A s p e c t
A s p e c t
P a n o r a m a
C i n e m a
P a n o r a m a Z o o m
C i n e m a Z o o m
F u l l
P a n o r a m a Z o o m
C i n e m a Z o o m
F u l l
F u l l
R e g u l a r
F u l l N a t i v e
S l i m
S l i m
Notes:
• You can also choose the size by pressing the π† buttons.
• When you change the aspect ratio or signal, reset the picture position to center.
• You can also access the "Front Menu" screen by using the MENU button on the side of the TV
instead of the remote control. Choose "Aspect" by pressing MENU
enter by using the CHANNEL +/- (è) buttons. Next, select an aspect ratio by pressing the
MENU button.
†
on the side panel and
†
• If the television receives a 16:9 signal from your HDMI device, the aspect mode will turn to
"Full" automatically. If the television receives a 4:3 signal from your HDMI device when you
are in "Full" aspect mode, it will return to "Regular" aspect mode. If you change the aspect
mode after the television changed it to "Full" automatically, the television will change to the
aspect mode you choosed. It also turns to "Full" automatically when the TV receives an HD
(1080i or 720p) signal.
• When you are receiving a 1080p signal in "Full Native" mode, you are unable to change the
aspect mode.
Menu
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate
the onscreen menu system. When a menu is displayed, press the MENU button to exit the
menu system.
• See individual topics like “Sound Adjust” for specific information on using menus.
OK
This button confirms your selection when you are in one of the onscreen menus.
Back
This button allows you to go back in the menu to change a selection or correct a mistake.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
ML/MTS
ML/MTS technology allows several audio signals to be broadcast in analog at once, giving you
a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an
MTS broadcast may also include a second audio program (SAP). When you are receiving a
digital broadcast, it is possible to choose a language that you wish to receive.
When receiving analog broadcast
Press the MODE button to select TV
MTS
Press the ML/MTS button
Stereo
By every press of the ML/MTS button, you change the mode
SAP
Mono
Notes:
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo
mode even if a certain broadcast is in mono sound only.
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.
• MTS unavailable if your television’s Input source is in Video-1, 2, 3, 4 or 5 mode, as
described on page 59.
• You can also change the mode by pressing the π† buttons.
When receiving digital broadcast
Multi Language
Press the MODE button to select TV
Press the ML/MTS button
English
Spanish
By every press of the ML/MTS button, you change the
language
• ML/MTS will not work when you are using the HDMI.
C.C. (Closed Caption)
Use the C.C. (Closed Caption) button to select the mode of closed caption.
Press the MODE button to select TV
Press the C.C. button
Closed Caption
On
Smart Caption
Off
Notes:
• Smart Caption will appear when you press the Muting button
only on channels where the broadcast contains closed
captioning.
• When you select "On", it will be the mode selected in the Closed Caption Menu.
• See page 37 when you set the caption/text mode.
• You can also change the mode by pressing the π† buttons.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Favorite
The Favorite button allows you to select your favorite channels easily. First, you must register
the channels that you like. See how to register below.
Press the FAVORITE button
Favorite
The favorite channel list will appear.
101
CBSXXXX
FOXXXX
π†
To select the channel you want to watch
102
Press the OK button
103-1
PBSXXXX
WEWEWEW
HBOXXXX
ABCABC
It will change to the channel you have selected.
123-456
107-2
8
1
4
Register the favorite channel
NHKNHK
MBSMBS
Press the channel number you want to register
The channel program will change.
Remove
Press the FAVORITE button for three seconds
The channel will be registered in the favorite channel list.
Notes:
• The maximum number of channels you can register is 24.
• If you have registered the maximum number of channels, and try to register more channels,
the oldest channel you registered will be deleted.
Delete the favorite channel
Press the FAVORITE button
Favorite
The favorite channel list will appear.
101
102
103-1
123-456
107-2
8
CBSXXXX
FOXXXX
π†
è
To select the channel you want to delete
To enter
PBSXXXX
WEWEWEW
HBOXXXX
ABCABC
Do you really remove ch 101
from this list ?
The screen to the right will appear.
è
To "Yes"
Press the OK button
The channel was deleted.
1
NHKNHK
MBSMBS
Yes
No
4
Remove
Press the FAVORITE button when finished
Guide
You can view the program information from the GUIDE.
Notes:
• The GUIDE function will work when you are receiving digital program only.
• The GUIDE will not show the correct time and date if you have not performed the set clock
function on your television. See page 53.
• When the program information is not being broadcasted, it will not show the correct
information.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
Mode
Your remote control can be used to operate some basic functions of your external devices. To
use your device, select the proper mode.
MODE
TV
Device
TV
STB
STB/DVR (Cable Satellite)
VCR/DVR
VCR
DVD
AUDIO
DVD Player (DVD Recorder)
Amplifier/Home Theater in Box
Press the MODE button
By every press of the Mode button, you can select the mode.
TV
STB
VCR
DVD
AUDIO
• The mode LED indicator on the remote control lights for 3 seconds each time the remote
control is operated.
External device control buttons
You can use this remote control to operate the basic functions of your external devices. See
page 67 on how to program the remote control to operate your other devices.
Note:
• The remote is preset to control JVC-brand devices.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Remote programming
You can program your remote control to operate your external devices, using the instructions
and codes on pages 68 - 72. The following external devices can be operated using your
remote control.
Device
Mode
Applied for these functions
Page
Cable Set Top Box
STB
Power on/off, Channel up/down, Volume up/down, Number 0 - 9, Tune, Return+/ TV,
Muting, Favorite Channel, Menu on/off, Arrow buttons, OK/Enter, Back, DVR (JVC Only)*,
Guide (EPG), Sub Channel, Closed Caption, Display (Recall),
68
Cable/PVR Combination
Satellite Set Top Box
DBS/PVR Combination
Rewind ( ), Playback ( ), Forward ( ), Record ( ), Stop ( ), Pause ( ).
VCR, DBS/PVR Combination
PVR, DVD/PVR Combination
VCR
DVD
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG), 69, 70
TV/VCR, Closed Caption, Eject ( ), Rewind ( ), Playback ( ), Forward ( ), Record ( ),
Stop ( ), Pause ( ).
DVD Player, DVD Recorder
Home Theater in Box
Power on/off, Channel up/down, Menu on/off, Arrow buttons, OK/Enter, Back, Guide (EPG),
TV/DVD (TV/VCR button), Sub Title (Sub T.), Open/Close ( ), Rewind ( ), Playback ( ),
Forward ( ), Record ( ), Stop ( ), Still ( ).
71
Amplifier, Home Theater in Box, AUDIO
Receiver
Power on/off, Audio Input Selection (V1 button), Volume up/down, Muting,
DVD operation buttons: Menu on/off, Arrow buttons, OK/Enter, Back, Sub Title (Sub T.),
Open/Close ( ), Rewind ( ), Playback ( ), Forward ( ), Stop ( ), Still ( ).
72
* DVR button only applies to JVC DVR (Dish Satellite STB).
Notes:
• To record to your VCR or DVD, hold the record ( l ) button on the remote control and press play
( ® ).
• If the code you programmed doesn't work, try the next one. If no codes work, refer to "Search
Code Function" on page 67. If your remote does not work after using the "Search Code Function",
use the remote that came with your device. Your TV remote can not be guaranteed to work with all
models, brands or operations.
• When the television remote control does not operate, for a model that allows you to switch the
remote control code on the device side, you can try switching the setting to default or something
else on the device side.
How to set the codes
1) Find your device and device's brand from the code list. See page 68 - 72.
2) Select the mode of your device by pressing the MODE button. Then confirm the mode LED on the
remote control.
3) Press and hold the TUNE button, then enter the first four digit code number listed using the
number buttons. When the code is set, the mode LED goes out for a second, then it lights.
4) After confirming the proper mode LED, release the TUNE button, and confirm the operation of your
device.
5) If your device does not respond, try and enter the next code.
Search Code Function
1) Select a mode of your device by pressing the MODE button.
2) Press the POWER and RETURN+/TV buttons. Hold for at least 3 seconds and release. Then confirm
the mode LED blinks.
3) Press any button* on the remote, and see if the selected device responds. *Use the applied
buttons except for √ ® cursors, Return+/TV and Rec ( l ) on the above chart.
4) If there was a response, press RETURN+/TV. The codes are now set. Then confirm the mode
LED goes out.
5) If there was no response, try to select the previous code or the next code by using √ or ® . If you
repeat a total of 65 times for the STB (90 times for the VCR, 120 times for the DVD and 132 times
for the AUDIO) without a response, use the remote control that came with your equipment. Press
RETURN+/TV to exit. Then confirm the mode LED goes out.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Programming Codes
STB mode
Cable Set Top Box
0003, 0008
Satellite Set Top Box
Satellite Set Top Box
ABC
AlphaStar
Chaparral
Coolsat
Crossdigital
DirecTV
0772
0216
1806
1109
Samsung
1377, 1276, 1108,
Americast
Bell South
Digeo
Director
General Instrument
0899
0899
1187
0476
0476, 0810, 0276,
0003
0144
0009, 0273
0476, 0810, 0276,
0003
1109, 1442, 1609
0856
0639, 1639, 1640
0869
1142, 1442
0749, 1749, 0790,
1285
1392, 1640
1806
0724, 0722
1535
1535
0869
0856, 1856
SKY
Sony
1377, 0392, 0566, Star Choice
0639, 1639, 1142, Tivo
0247, 0749, 1749, Toshiba
0724, 0819, 1856,
1076, 1108, 0099, UltimateTV
1109, 1414, 1442, Ultrasat
GoldStar
Hamlin
Jerrold
1609, 1392, 1640
1505, 1005, 0775, US Digital
1170, 1775 USDTV
1505, 1005, 0775, Voom
Uniden
Memorex
Motorola
0000
Dish Network System
Dishpro
1376, 0476, 0810,
0276, 1187
1877, 0237, 0008
0000, 0008, 0107
0000
1305, 0317, 0025
1877, 0877, 0144, GE
0533
0000
0000
0279, 0273
0000
0000, 0144
1877, 0877, 0477,
0008
1006
0003
0276
0003
Pace
1775
Zenith
Panasonic
Paragon
Philips
Echostar
1505, 1005, 0775,
1170, 1775
0775, 1775
0566
DBS/PVR Combination
Expressvu
Pioneer
DirecTV
1377, 0392, 0639,
1142, 1076, 0099,
1392, 1442, 1640
1505, 0775
General Instrument
0869
Pulsar
Quasar
Regal
Runco
Samsung
Scientific Atlanta
GOI
0775, 1775
1535
0819
Hisense
Hitachi
HTS
Dish Network System
Dishpro
1505, 0775
0775, 1775
Echostar
1505, 0775, 1170
0775
Hughes Network Systems 1142, 0749, 1749, Expressvu
1442
Hughes Network Systems 1142, 1442
Humax
iLo
1790
1535
JVC
1170
Sony
Motorola
Philips
0869
1142, 0099, 1442
0392
Starcom
Supercable
Torx
Toshiba
Zenith
JVC
LG
0775, 1170, 1775
1414
Proscan
RCA
Magnavox
Memorex
Mitsubishi
Motorola
Next Level
Panasonic
Pansat
Paysat
Philips
0724, 0722
0724
0749
0869
0869
0247, 0701
1807
0724
1142, 0749, 1749,
0724, 1076, 0722,
0099, 1442
0392, 0566
1535
1392
0000
0000, 0525, 0899
Samsung
Sony
Star Choice
1442
0639, 1640
0869
Cable/PVR Combination
Americast
Digeo
General Instrument
Jerrold
Motorola
Pace
Pioneer
Scientific Atlanta
Sony
Supercable
Zenith
0899
1187
0810
0810
1376, 0810, 1187
1877, 0237
1877, 0877
1877, 0877
1006
Proscan
Proton
RadioShack
RCA
0869
0566, 0855, 0143,
1392
0276
0899
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR mode
VCR
VCR
VCR
ABS
1972
0048, 0209
0000
Fisher
Fuji
Funai
Garrard
0047, 0104, 0046
0035, 0033
0000, 0593, 1593
0000
Marta
Matsushita
0037
0035, 0162, 0227,
1162
1972
0035
Admiral
Adventura
Aiko
0278
Media Center PC
MEI
Aiwa
0037, 0000, 0307, Gateway
1972
0479
0041, 0061, 0106
1972
0278
0035
0240
0037, 0278
0240
GE
0060, 0035, 0240, Memorex
0202, 0760, 0761,
0807, 1035, 1060
0432, 0526
0037, 0209, 0038,
0225, 1237
0035, 0162, 0037,
0048, 0039, 0047,
0240, 0000, 0104,
0209, 0046, 0307,
0479, 1037, 1048,
1162, 1237, 1262
0240, 0043, 0061
0240
Akai
Alienware
America Action
American High
Asha
Go Video
GoldStar
Audiovox
Gradiente
Harley Davidson
Harman/Kardon
0000
MGA
Beaumark
Bell & Howell
Broksonic
0000
0081, 0038
0072
MGN Technology
Microsoft
Mind
0104
1972
1972
0184, 0121, 0209, Harwood
0002, 0479, 1479
0037
0035
0020
0081
0072, 0278
0037, 0278, 1278
0072
0037, 0047, 0240, Hughes Network Systems 0042, 0739
0072, 0271
Headquarter
Hewlett Packard
HI-Q
0046
1972
0047
0037, 0240, 0000,
Minolta
Mitsubishi
0042, 0105
Calix
0081, 0067, 0043,
0041, 0061, 0173,
0807
0035, 0048
0240, 0000
Canon
Capehart
Carver
CCE
Citizen
Colt
Hitachi
0042, 0041, 0105, Motorola
1037
1972
1972
MTC
Multitech
NEC
Howard Computers
HP
0000, 0072
0035, 0037, 0048,
0104, 0067, 0041,
0038, 0008
0037
1972
0240
1972
0035
1062, 0162, 0037,
0048, 0104, 0432,
0593, 1048, 1162,
1262
0184, 0121, 0209,
0002, 0208, 0479,
1479
1062, 0035, 0162,
0225, 0227, 0616,
1035, 1162, 1262
0035, 0037, 0240,
0042, 0038, 1035,
1237
Craig
Humax
0739
1972
1972
0041
Curtis Mathes
0060, 0035, 0162, Hush
0041, 0760, 1035
0240
Nikko
Niveus Media
Noblex
iBUYPOWER
Jensen
JVC
Cybernex
CyberPower
Daewoo
1972
0045, 0067, 0041, Northgate
0008, 0366, 1707, Olympus
1945, 1774, 1775, Optimus
1776, 1777
0037, 0278
0067, 0041, 0038
0045, 0104, 0278,
0020, 0046, 0561,
1278
0020
1972
0042
0739
0039, 0038
0000
0037
Daytron
Dell
Denon
DirecTV
Durabrand
Dynatech
Electrohome
Electrophonic
Emerex
KEC
Kenwood
KLH
Kodak
LG
0072
Orion
0035, 0037
0037, 0045, 0042,
0209, 0038, 1037
1972
0000, 0208
0240, 0072
0037
Panasonic
Penney
Linksys
Lloyd's
Logik
0037
0032
Emerson
0035, 0037, 0184, LXI
0240, 0045, 0000, Magnasonic
0121, 0043, 0209, Magnavox
0002, 0278, 1593,
1479, 1278, 0593,
0561, 0479, 0208, Magnin
0593, 1278
0035, 0039, 0081, Pentax
0000, 0149, 0563, Philco
0593, 1593, 1781
0240
0042, 0105
0035, 0000, 0038
0061
Marantz
0035, 0081
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
VCR mode
PVR
VCR
VCR
Philips
0035, 0081, 0000, Symphonic
0563, 0593, 0618, Systemax
0739, 1081, 1181, Tagar Systems
0000, 0593, 1593
1972
1972
Howard Computers
HP
Hughes Network Systems 0739
1972
1972
1266
0037
Tatung
0081, 0045, 0000, Humax
0067, 0041, 0008, Hush
0739
1972
Pilot
Pioneer
Polk Audio
Portland
Presidian
Profitronic
Proscan
0081, 0042, 0067
0081
0020
1593
0240
0060, 0202, 0760, Tivo
0761, 1060
0072
0039
0046
0046
0035, 0162, 1035,
1162
0000, 1037
0037
0037
0366
iBUYPOWER
JVC
Linksys
Media Center PC
Microsoft
1972
1945
1972
1972
1972
1972
1972
1972
0616, 1777
0618, 0739
0880
0614, 0616
0739
0614, 0616
0636, 1972
1972
1972
1972
0618, 0636, 0739
1008, 1972, 1996
1972
Teac
0000, 0041
0035, 0162
0035, 0037, 0000
0000
0618, 0636, 0739, Mind
1996
Technics
Teknika
Thomas
Niveus Media
Northgate
Protec
Pulsar
Quarter
Quartz
Quasar
TMK
Toshiba
0240, 0208
0081, 0045, 0042, Panasonic
0067, 0043, 0041, Philips
0008, 0057, 0366, RCA
0845, 1008, 1145, ReplayTV
1972, 1996
0037, 0240
1972
0240
0045
0038
0045, 0061
0037
Samsung
Sonic Blue
Sony
RadioShack
Radix
Randex
RCA
Totevision
Touch
Unitech
Stack 9
0060, 0035, 0240, Vector
Systemax
Tagar Systems
Tivo
Toshiba
Touch
0000, 0042, 0149, Vector Research
0105, 0106, 0202, Video Concepts
0760, 0761, 0807, Videomagic
0880, 1035, 1060
Videosonic
0240
Realistic
0035, 0037, 0048, Viewsonic
0047, 0000, 0104, Villain
1972
0000
Viewsonic
Voodoo
1972
1972
0046
0614, 0616
1972
Voodoo
Wards
1972
ZT Group
1972
ReplayTV
Ricavision
Runco
0060, 0035, 0048,
0047, 0081, 0240,
0000, 0042, 0072,
0149, 0760
0209, 0072
0035, 0000, 0072
0041, 0038
0039, 0033, 0000,
0209, 0034, 0479,
1139, 1479
1972
DVD/PVR Combination
0000
0039
Samsung
0240, 0045, 0432,
0739, 0760, 1014
0048, 0039
0000, 0067, 0209, Yamaha
0041, 0271, 0479, Zenith
1479
Emerson
White Westinghouse
XR-1000
Sanky
Sansui
Sanyo
Scott
0047, 0240, 0104,
0046
ZT Group
0184, 0045, 0121,
0043
DBS/PVR Combination
1945
Sears
0035, 0037, 0047,
0000, 0042, 0104, Echostar
0046, 0057, 0105, Hughes Network Systems 0739
1237
JVC
1945
0739
0739
Sharp
0048, 0209, 0807, Philips
0848, 1048
0104, 0072
0240
0045, 0072
0614, 0616
0035, 0032, 0033, Alienware
0000, 0034, 0636, CyberPower
0639, 0640, 1032, Dell
1232, 1972
1972
Samsung
Shintom
Shogun
Singer
Sonic Blue
Sony
PVR
ABS
1972
1972
1972
1972
0739
1945
1945
1972
1972
DirecTV
Dish Network System
Echostar
Stack 9
STS
Sylvania
0042
0035, 0081, 0000, Gateway
0043, 0593, 1593, Hewlett Packard
1781
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
DVD mode
DVD Recorder
1416
DVD
DVD
Accurian
Advent
Aiwa
Akai
Alco
1416
1016
0641
0695, 0770, 0899
0790
Magnavox
0503, 0539, 0646, Accurian
0675, 0821, 1268
0539
Apex Digital
1056
1168
1129
0490
0675, 1334
1158
0741, 1158, 1304,
1730
Marantz
Memorex
Microsoft
Mintek
Aspire Digital
CyberHome
Denon
Funai
Gateway
Go Video
0695, 0831, 1270
0522, 1708
0839, 0717
1521, 0521
0741
Allegro
Apex Digital
0869
0672, 0717, 0755, Mitsubishi
0830, 1056, 1061
1023
NAD
NEC
Arrgo
0785
Aspire Digital
Audiovox
Blaupunkt
Blue Parade
Broksonic
Cinea
Cine Vision
Citizen
Coby
1168
0790
0717
0571
0695
0831
0876, 0833, 0869
1277
0778, 1107
0831
Nesa
0717
1402
iLo
JVC
LG
LiteOn
Magnavox
1348
1164
0741
NexxTech
Norcent
Onkyo
Oritron
Panasonic
1003, 1107
0503, 0627
0651
0490, 0703, 1362, Panasonic
1462, 1490, 1762 Philips
0503, 0539, 0646, Pioneer
0675, 0854, 1158, RCA
1260, 1267, 1354
0525, 0571, 0631
1061
0539
0770
0675
1158, 1416, 1440
0646, 0675
0490
0646, 1158
0631
0522
0490, 1470
1158
Philips
Craig
Curtis Mathes
CyberHome
Samsung
Sensory Science
Sharp
Sony
Sylvania
Zenith
1087
Pioneer
0816, 0874, 1023, Polaroid
1024, 1117, 1129 Polk Audio
0784, 0705, 0770, Portland
0833, 0869, 1169, Presidian
0630, 0675
1033, 1431
0675
Daewoo
0741
1172
Prima
1016
Denon
Disney
Durabrand
DVD2000
Emerson
0490, 0634
0675, 1270
1127
0521
0591, 0675, 0821,
1268
Proscan
Pro Vision
Qwestar
RCA
0522
0778
0651
Home Theater in Box
Aiwa
0641
0790
1770, 1771, 1772,
1773
0522, 0571, 0717, Audiovox
0790, 0822, 1022, JVC
1132
Enterprise
ESA
Fisher
Funai
Gateway
GE
Go Video
0591
0821, 1268
0670
0675, 1268, 1334
1158
0522, 0815, 0717
0744, 0715, 0741, Sansui
0783, 0833, 0869, Sanyo
1044, 1075, 1099, Sensory Science
Rio
Rotel
Sampo
Samsung
0869
0623
0752
KLH
Koss
Oritron
0790
0651
0651
0539
0790
0869
0869
0790
0490, 0573, 0744, Polk Audio
0820, 0899, 1044, RCA
1075, 1470
0695
0670, 0695, 0873
1158
Rio
Sonic Blue
Teac
Venturer
0790
1158, 1304, 1730
0741
0717
0582, 0702
0573, 0664, 1247
0672
1500, 1588
1348
0717
1268
0627
0702
Sharp
0630, 0675, 0752,
1256
1117
GoldStar
Greenhill
Harman/Kardon
Hitachi
Hiteker
Humax
iLo
Sharper Image
Sherwood
Shinsonic
Sonic Blue
Sony
0770
0533, 0839
0869, 1099
0533, 1533, 0864,
1033, 1431, 1536
0821
0675, 0821, 1268
0675, 0821
0717, 0790
0490, 0703
0571
Initial
Superscan
Sylvania
Symphonic
Teac
Insignia
Integra
JBL
Jensen
JVC
1016
Technics
0558, 0623, 0867, Theta Digital
1164, 1602, 1770, Tivo
1503
1771, 1772, 1773
0790
0490, 0534
0717, 0790, 1149
0651
Toshiba
0503, 0695, 1045,
1154, 1503, 1515,
1588
0503
0839
Kawasaki
Kenwood
KLH
Urban Concepts
US Logic
Venturer
Xbox
Yamaha
Koss
Lasonic
Lenoxx
LG
0798
1127
0790
0522, 1708
0490, 0539, 0545
0503, 0591, 0741,
0869
0591, 0741, 0869
1058, 1158, 1416, Zenith
1440
LiteOn
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Programming
Audio mode
Amplifier
Receiver
Home Theater in Box
Amstrad
Bose
Curtis Mathes
Durabrand
GE
Harman/Kardon
JVC
Left Coast
Lenoxx
Linn
Marantz
NEC
Optimus
Philips
Pioneer
Polk Audio
RCA
0078
0674
0300
1561
0078
0892
0331
0892
Koss
1366, 1497
1798
1437
1293, 1869
1497
1189, 1269, 0531, Audiovox
1514 Bose
1189, 1269, 0891, Cambridge Soundworks
1289
1393
1751
1389, 1751
1389
0135, 0842, 1298, Durabrand
1320, 1531
1023, 0531, 1074
1366, 1497
1308, 1518, 0367, Insignia
1288, 1316, 1548, Integra
1633, 1763, 1764
1189, 1269, 0891, JVC
1266, 1289, 1673
1023, 0014, 0150, KLH
0531, 0630, 1123, Koss
1384, 1823
1508
Aiwa
1388, 1641
1563, 1615
1563, 1615
1609
1257, 1430
1390
1229, 1933
1370
1352
1389
1420
1250
2832
1561
1517
1532
1426
1751
1298
1306
1374, 1495, 1676,
1871
Lasonic
Lenoxx
LG
Liquid Video
Magnavox
Amphion Media Works
AMW
Anam
Apex Digital
Marantz
1561
Classic
Coby
Criterion
Daewoo
Denon
0269, 0282, 0829
0892, 0269
0264
0300, 0823
0892, 0269
0013, 0300, 0823
0892, 0269
0300, 0823
0264
0689, 0815, 1126
0078
0331
0078, 0013
0354, 0133
Mitsubishi
NexxTech
Norcent
Nova
Onkyo
Gateway
Go Video
Initial
Optimus
Oritron
Panasonic
Shure
Sony
Soundesign
Victor
Wards
JBL
Philips
Yamaha
Pioneer
1390, 1412
1366, 1497
1798
1561
1293, 1869
1497
Lasonic
Lenoxx
LG
Receiver
Polaroid
Polk Audio
ADC
Aiwa
0531
1289, 1414
1254
1405, 0121, 1243, Proscan
Liquid Video
1388, 1641
1512
1390
1563, 1615
1563, 1615
1609, 1074
1257, 1430
1189
RCA
1023, 1609, 1254, Magnavox
0531, 1074, 1123, NexxTech
1514
1751
1389, 1751
1389
1298, 1531
1366, 1497
1288, 1316, 1548,
1633, 1763, 1764
1266, 1673
1384
1508
1289
1609, 1390, 1511
1437
1869
1519
1295, 1500
1469
1556
1517
Akai
Alco
1390, 1511
1437
Norcent
Nova
Amphion Media Works
AMW
Anam
Apex Digital
Audiotronic
Audiovox
Regent
Rio
Saba
Samsung
Sansui
Sanyo
1869
Onkyo
0531, 1519
1295, 1500
1764
Oritron
Panasonic
1390
1251, 1469
0771, 1286
1556
1517, 1653
1426
Philips
Pioneer
Polaroid
Polk Audio
RCA
Bose
1229, 0639, 1841, Sharp
1933
1602
1370
0531
1189
1352
1389
1420
1250
1414
Sharper Image
Brix
Sherwood
Shinsonic
Sirius
Sonic Blue
Sony
Cambridge Soundworks
Capetronic
Carver
Classic
Coby
Criterion
Daewoo
Delphi
1602
1532, 1869
Regent
Rio
1058, 1441, 1258, Saba
1759, 1622, 0474, Samsung
1406, 1558, 1658, Sanyo
1758, 1858, 1958
1023
1313
Sharper Image
Sherwood
Shinsonic
Stereophonics
Denon
1360, 0771, 1142, Sunfire
1426
1660, 2832
0463
1517
Teac
0463, 1074, 1390, Sonic Blue
1532, 1869
0689, 1622, 1558,
1658, 1758, 1858,
1958
Garrard
Gateway
Go Video
1528
Sony
Technics
Thorens
1308, 1518, 1384
1189
1532
Harman/Kardon
0110, 0891, 1304, Toshiba
1788
1390
0014
1406, 1414
0176, 1176, 1276, Zenith
1331, 1375, 1476
0857, 1293
Teac
1390, 1528
1788
1390
1331, 1375
1293
1306
1426
1751
Venturer
Wards
XM
Toshiba
Venturer
Yamaha
Initial
Insignia
Integra
JBL
0135, 1298, 1320
0110, 1306
Yamaha
JVC
0531, 1374, 1495, Zenith
1560, 1676, 1871,
1894
Kenwood
KLH
1313, 1570, 1569
1390, 1412
72
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Information
Weak Signal
This OSD appears when the digital channel that you have selected is too weak to receive or no
signal is being detected for that channel. It also appears when Noise Muting is On and no signal
is being received from an external source.
No Program or Weak Signal
Audio / Data Only Channel
This OSD appears when the selected channel is not broadcasting any picture or sound, or is
only broadcasting data information.
Audio / Data Only Channel
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Refer to the table below to check the condition. If you think that there is a problem, contact the
JVC Service Center where you purchased the television.
PROBLEMS
CHECK
There is no power
• See if the power cord became unplugged.
• Check for a blown fuse or circuit breaker or a power outage.
• The antenna could be disconnected.
There is no picture
or sound
• The input mode could be set improperly. See page 59.
• The tuner (Auto Tuner Setup) could be set improperly. See page 41.
• The TV station may be having difficulties. Check to see if other stations are working.
• Use the HDMI cable with HDMI logo
. See page 19.
• If you have a device connected to INPUT-1 or INPUT-2, you will not be able to hear any
audio from the AUDIO OUT on the back of the TV.
• You cannot output audio using the OPTICAL OUTPUT when you have digital sound from
an HDMI device connected to the INPUT-1 or INPUT-2 connection on the back of the TV.
(See page 18).
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i
signals. Please check your settings.
Remote control is not • Check to see that the batteries are still working and properly installed.
operating properly or • Make sure the remote has a clear sight path to the TV.
at all
• You may be too far from the TV. You must be within 23 feet (7 meters).
You cannot select a
certain channel
• Make sure the channels have been programmed. See "Channel Summary", page 42.
• Check to see if the channel is locked. See "Channel Summary - Lock" page 43.
The power turns off
by itself
• Make sure the set did not become unplugged.
• Perhaps the On/Off Timer is set. See page 54.
• Check to see if the Sleep Timer was set. See page 61.
It does not operate
correctly
• This television is operated by a microprocessor. It is possible that external noise or
interference is causing the problem. If the television does not function correctly, remove the
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet
again and operating the television.
The clock is wrong
• The power was interrupted and the clock was not reset. See page 53.
The color quality
is poor
• Tint and Color may be improperly adjusted. See page 47.
• The Video Status mode may be turned to the wrong setting. See page 60.
There are lines
across the picture
• There could be interference from another electrical appliance, such as a computer,
another TV or VCR. Move any such appliances further away from the TV.
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operating nearby. Move the antenna away from the appliance or change to a coaxial
cable connection which is less prone to interference.
The picture is spotted
There are double
pictures (ghosts)
• A building or passing airplane can reflect the original signal and produce a second,
slightly delayed one. Adjust your antenna position.
Picture is snowy
(image noise)
• Your antenna may be damaged, disconnected or turned. Check the antenna
connection. If the antenna is damaged, replace it.
Screen is 80% black
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 37.
• Make sure the MTS settings are correct. See page 64.
Stereo or bilingual
programs can't be
heard
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
PROBLEMS
CHECK
Static electricity
• It is normal to feel static electricity if you brush or touch the screen.
You hear occasional
crackling sounds
• It is normal for the TV to make crackling sounds when first turned on or off. Unless
the sound or picture become abnormal, this is fine.
• Press the CHANNEL- and VOLUME- buttons on the side panel of the TV simultaneously
for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug
the power cord and plug it back in.
It does not operate
correctly
The picture is slightly • Change the picture format setting on your external device to 1080i or other resolution.
cut off when you use
1080p format only
The screen
disappears except for
the menu screen
• This occurs when you select a digital menu when your input source is from the HDMI
connection. Press the menu button.
The following are not malfunctions.
•
The television may make a creaking sound if the temperature of the room or the
temperature of the inside of the television changes. If there is no problem with the screen or
sound, then there is no need to worry.
•
Although the picture may be temporarily disturbed and noise may be seen on the screen if
the power is turned on immediately after it has been turned off, this is not a malfunction.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
LT-37X688
Model
LT-42X688
LT-42XM48
LT-37XM48
Type
LCD Flat Television
Reception Format
Reception Range
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper
and Ultra bands (191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Power Source
AC 120V, 60 Hz
Power Consumption
210W
250W
37 inch / 94 cm
measured diagonally,
16:9 ratio
42 inch / 106.7 cm
measured diagonally,
16:9 ratio
Screen Size
Audio Output
Speakers
10W + 10W
4 x 16cm Twin Oblique Cone x 2
Antenna Terminal
(VHF/UHF,
ATSC/DIGITAL
CABLE IN)
75 ohms (VHF/UHF)(F-type connector)
480i
S (Input 3)
Input 3, 4, 5
Terminal
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
Input 3, 4 Terminal
(Component Terminal)
1080i / 720p / 480p / 480i
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p 75 ohms
Video: 1080p / 1080i / 720p / 480p / 480i
Input 1, 2 Terminal
(HDMI Input Terminal)
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit
•
Personal computer compatibility cannot be guaranteed.
Audio Output Jacks
(FIX)
FIX : 500mVrms (-4dBs), Low Impedance
Optical Output
Digital Audio
Digital Out (optical) x 1
36 1/4 x 25 3/4 x 9 1/8
(with stand)
91.9 x 65.2 x 23
(with stand)
40 5/8 x 28 3/8 x 11 3/4
(with stand)
103 x 72 x 29.6
(with stand)
Dimensions (inch/cm)
W X H X D
36 1/4 x 23 7/8 x 4 3/8
(without stand)
91.9 x 60.4 x 10.8
(without stand)
40 5/8 x 26 1/2 x 4 3/8
(without stand)
103 x 67.2 x 10.8
(without stand)
42.9 / 19.5 (with stand)
57.2 / 26 (with stand)
Weight (lbs / kg)
40.3 / 18.3 (without stand)
53 / 24.1 (without stand)
Accessories
Refer to "unpacking your TV", page 9
Specifications subject to change without notice.
• The open source software is embedded in this product. For more information, please go to:
• This product uses the software of the Independent JPEG Group.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Model
LT-42X788
LT-47X788
Type
LCD Flat Television
Reception Format
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable
VHF 2 to 13, UHF 14 to 69 at ATSC,
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable
Reception Range
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper
and Ultra bands (191 channel frequency synthesizer system) at Analog
•
Reception of channel A-5 ("95" of the TV set's on-screen cable channel
numbers) is not recommended for your TV set.
Power Source
AC 120V, 60 Hz
Power Consumption
250W
275W
42 inch / 106.7 cm
measured diagonally,
16:9 ratio
47 inch / 119.3 cm
measured diagonally,
16:9 ratio
Screen Size
Audio Output
Speakers
10W + 10W
4.5 x 16 cm Twin Oblique Cone x 2
Antenna Terminal
(VHF/UHF,
ATSC/DIGITAL
CABLE IN)
75 ohms (VHF/UHF)(F-type connector)
480i
S (Input 3)
Input 3, 4, 5
Terminal
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
C: 0.286 Vp-p (burst signal), 75 ohms
Video: 1 Vp-p, 75 ohms
Audio: 500 mVrms (-4dBs) high impedance
Input 3, 4 Terminal
(Component Terminal)
1080i / 720p / 480p / 480i
Y: 1 Vp-p positive, 75 ohms (negative sync provided)
PB/PR: 0.7 Vp-p 75 ohms
Video: 1080p / 1080i / 720p / 480p / 480i
Input 1, 2 Terminal
(HDMI Input Terminal)
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit
•
Personal computer compatibility cannot be guaranteed.
Audio Output Jacks
(FIX)
FIX : 500mVrms (-4dBs), Low Impedance
Optical Output
Digital Audio
Digital Out (optical) x 1
39 3/4 x 28 1/8 x 11 3/4
(with stand)
100.7 x 71.2 x 29.6
(with stand)
44 1/8 x 30 5/8 x 11 3/4
(with stand)
112 x 77.7 x 29.6
(with stand)
Dimensions (inch/cm)
W X H X D
39 3/4 x 26 x 5 1/8
(without stand)
100.7 x 66 x 13
(without stand)
44 1/8 x 28 5/8 x 5 1/8
(without stand)
112 x 72.6 x 13
(without stand)
61.6 / 28 (with stand)
69.3 / 31.5 (with stand)
Weight (lbs / kg)
58.1 / 26.4 (without stand)
65.8 / 29.9 (without stand)
Accessories
Refer to "unpacking your TV", page 9
Specifications subject to change without notice.
• The open source software is embedded in this product. For more information, please go to:
• This product uses the software of the Independent JPEG Group.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
JVC COMPANY OF AMERICA
Division of JVC Americas Corp.
1700 Valley Road
JVC CANADA, INC.
21 Finchdene Square
Scarborough, Ontario
Canada, M1X 1A7
Wayne, New Jersey, 07470
Download from Www.Somanuals.com. All Manuals Search And Download.
|