JVC Flat Panel Television 0107TNH II IM User Manual

LCD Flat Television Users Guide  
For Models:  
LT-42E488  
LT-42E478  
LT-32E488  
LT-32E478  
POWER  
SLEEP SUB CH V.STATUS SOUND  
1
4
2
5
8
0
3
6
7
TUNE  
9
RETURN+/TV  
V1  
V2  
V3  
V4  
V5  
MUTING  
CH+  
VOL  
VOL  
+
FAV.  
CH–  
ML/MTS DISPLAY  
MENU  
C.C.  
ASPECT  
BACK  
GUIDE  
OK  
RMT-CV1291  
Illustration of LT-32E488 and RM-C1291  
Important Note:  
In the spaces below, enter the model and serial number of your television (located at the  
rear of the television cabinet). Staple your sales receipt or invoice to the inside cover of this  
guide. Keep this user’s guide in a convenient place for future reference. Keep the carton  
and original packaging for future use.  
Model Number:  
LCT2224-001A-A  
0107TNH-II-IM  
Serial Number:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT RECYCLING INFORMATION  
This product has a fluorescent lamp that contains mercury. Disposal  
of these materials may be regulated in your community due to  
environmental considerations. For disposal or recycling information,  
please contact your local authorities or for USA, the Electronic Industries  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's  
instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug  
has two blades with one wider than the other. A grounding type plug has two blades and  
a third grounding prong. The wide blade or the third prong are provided for your safety. If  
the provided plug does not fit into your outlet, consult an electrician for replacement of the  
obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience  
receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
13) Unplug this apparatus during lightning storms or when unused for long periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has  
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been  
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or  
moisture, does not operate normally, or has been dropped.  
15) Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
16) Avoid improper installation and never position the unit where good ventilation is impossible. When  
installing this TV, distance recommendations must be maintained between the set and the wall,  
as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance  
guidelines shown for safe operation.  
200 mm  
200 mm  
50 mm  
150 mm  
150 mm  
POWER  
17) Cautions for installation  
— Do not tilt the TV towards the left or right, or towards the back.  
— Install the TV in a corner on the floor so as to keep cords out of the way.  
— The TV will generate a slight amount of heat during operation. Ensure that sufficient space is  
available around the TV to allow satisfactory cooling.  
18) Make enough room for inserting and removing the power plug. Place the TV as close to the  
outlet as possible. The main power supply for this TV is controlled by inserting or removing the  
power plug.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
We have an important note for customers who subscribe to basic cable services (do not have  
a separate cable box) and plan to use their JVC TV remote control to select channels.  
Once you run the Auto Tuner Setup (which detects and programs all the channels your TV is  
receiving through the RF input), every channel number available from your cable company  
will appear in your television’s Channel Summary and they will all be marked as available for  
scanning. Even though every channel is detected and appears as available, you will only be  
able to view those that you specically subscribe to from your cable company. This will likely  
mean there are blank channels between those channels you wish to scan or “surf”.  
We apologize for any inconvenience this may cause but it is important to note that this is  
not a malfunction of your television. If you want to sequentially scan those channels you  
subscribe to without blank ones in between, you can contact your cable company for their  
cable box and remote.  
Avoiding Ghost Images  
Displaying xed images for extended periods of time can leave a subtle but temporary ghost  
image on your screen. To avoid this, mix your viewing pattern.  
Examples include, but are not limited to the following:  
For example...  
• Stock-market report bars  
• Shopping channel logos and pricing  
displays  
TV on  
TV off  
• Video game patterns or scoreboards  
• Bright station logos  
• Internet web sites or other computer-style  
images.  
• DVD discs, video tapes, laser discs  
• Broadcast, cable, satellite channels or  
digital television tuners/converters.  
XYZ  
XYZ  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Caring for the Cabinet  
Normally, light dusting with a soft, non-scratching duster will keep your TV clean.  
If you wish to wipe down the television, first unplug it. Then wipe gently with a soft cloth, slightly  
moistened with water. You can add a few drops of mild liquid detergent to the water to help  
remove spots of oily dirt.  
• DO NOT allow liquid to enter the TV through the ventilation slots.  
• DO NOT use strong or abrasive cleaners on the TV.  
• DO NOT spray liquids or cleaners directly on the TV’s surface.  
• DO NOT rub or scrub the TV harshly. Wipe the set gently with a soft cloth.  
Caring for the Screen  
The screen is treated with an electrostatic-proof coating. When it gets dirty, wipe it gently with a  
soft cloth. If the screen is very dirty, wipe it down with a cloth dipped in a diluted kitchen cleaner  
and thoroughly wrung-out. Then wipe immediately after with a clean, dry cloth.  
Do not apply alcohol, organic solvents (like acetone), acidic or alkaline cleansers to the screen.  
These will remove the coating layer and cause discolorations.  
Do not push or hit the screen. This could cause scratches on the screen surface and image  
distortions.  
Tidying the cables  
A cable holder which keeps your connection cables tidy is attached to the back of the stand.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warnings  
Disconnecting the stand  
If you disconnect the stand, attach the bottom cover and the screw (supplied) into the hole.  
1) Place the TV face down on a soft cloth on a table.  
2) Remove the four screws from the back of the TV.  
3) Pull out the stand from the TV.  
4) Cover the hole with a bottom cover and tighten the screw.  
Note:  
To re-install the stand, reverse the procedure from 4) to 1).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Button Functions . . . . . . . . . . 57  
Power . . . . . . . . . . . . . . . . . . 57  
Number Buttons . . . . . . . . . . . . . 57  
Important Safety Precautions . . 2  
Warnings . . . . . . . . . . . . . . . 5  
Quick Setup . . . . . . . . . . . . . . 9  
Unpacking your TV . . . . . . . . . . . . 9  
TV Models . . . . . . . . . . . . . . . . 10  
TV Remote Control . . . . . . . . . . . 11  
Getting Started . . . . . . . . . . . . . 12  
The Remote Control . . . . . . . . . . 12  
Connecting Your Devices . . . . . . . 13  
Interactive Plug In Menu . . . . . . . . 21  
Tune  
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
57  
Input . . . . . . . . . . . . . . . . . . . 57  
Channel +/- . . . . . . . . . . . . . 57  
Volume +/- . . . . . . . . . . . . . 58  
Return+/TV . . . . . . . . . . . . . . . 58  
Sound . . . . . . . . . . . . . . . . . . 58  
Muting . . . . . . . . . . . . . . . . . . 58  
Video Status . . . . . . . . . . . . . . . 59  
Sleep Timer . . . . . . . . . . . . . . . 59  
Display . . . . . . . . . . . . . . . . . 60  
C.C. . . . . . . . . . . . . . . . . . . . 60  
Aspect . . . . . . . . . . . . . . . . . 61  
Aspect Ratios . . . . . . . . . . . . . 61  
Menu . . . . . . . . . . . . . . . . . . 62  
OK . . . . . . . . . . . . . . . . . . . 62  
Back . . . . . . . . . . . . . . . . . . . 62  
ML/MTS . . . . . . . . . . . . . . . . . 63  
Sub Channel . . . . . . . . . . . . . 63  
Favorite . . . . . . . . . . . . . . . . 64  
Guide . . . . . . . . . . . . . . . 64  
Onscreen Menus . . . . . . . . . 24  
Using the Guide . . . . . . . . . . . . . 24  
Onscreen Menu System . . . . . . . . . 25  
Initial Setup . . . . . . . . . . . . . 28  
Noise Muting . . . . . . . . . . . . . . 28  
Language . . . . . . . . . . . . . . . . 28  
Front Panel Lock . . . . . . . . . . . . 28  
V-Chip . . . . . . . . . . . . . . . . . . 29  
Set Lock Code . . . . . . . . . . . . . 35  
Closed Caption . . . . . . . . . . . . . 36  
Auto Shut Off . . . . . . . . . . . . . . 38  
Software Version . . . . . . . . . . . . . . 38  
Power Indicator . . . . . . . . . . . . . 38  
Quick Startup . . . . . . . . . . . . . . . 39  
Auto Tuner Setup . . . . . . . . . . . . 40  
Channel Summary . . . . . . . . . . . . 41  
Channel Label . . . . . . . . . . . . . 42  
Find Channel . . . . . . . . . . . . . . . 43  
Digital Antenna Level . . . . . . . . . . 43  
HDMI Size . . . . . . . . . . . . . . . . . 44  
Video-1 Audio . . . . . . . . . . . . . 44  
Video Input Label . . . . . . . . . . . 45  
Picture Adjust . . . . . . . . . . . . . 46  
Picture Settings . . . . . . . . . . . . . 46  
Color Temperature . . . . . . . . . . . . 46  
Color Management . . . . . . . . . . . . 47  
Dynamic Gamma . . . . . . . . . . . . . 47  
Noise Reduction . . . . . . . . . . . . . . . 47  
Natural Cinema . . . . . . . . . . . . . . 48  
Position Adjustment . . . . . . . . . . . . 48  
Reset . . . . . . . . . . . . . . . . . . 49  
Sound Adjust . . . . . . . . . . . . . 50  
Sound Settings . . . . . . . . . . . . . 50  
Optical Out . . . . . . . . . . . . . 50  
Turn On Volume . . . . . . . . . . . . . 51  
Volume Limit . . . . . . . . . . . . . . 51  
Reset . . . . . . . . . . . . . . . . . . 51  
Clock/Timers . . . . . . . . . . . . . . . . 52  
Set Clock . . . . . . . . . . . . . . . . 52  
On/Off Timer . . . . . . . . . . . . . . . 53  
Photo Viewer . . . . . . . . . . . . . . . . 54  
Auto Demo . . . . . . . . . . . . . . . 56  
OSD Information . . . . . . . . . . 65  
Weak Signal . . . . . . . . . . . . . 65  
Audio/Data Only Channel . . . . . . . 65  
Troubleshooting . . . . . . . . . . 66  
Specifications . . . . . . . . . . 68  
Warranty . . . . . . . . . . . . . 70  
Authorized Service Center . . . 71  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Unpacking your TV  
Thank you for your purchase of a JVC LCD Flat Television. Before you begin setting up your  
new television, please check to make sure you have all of the following items. In addition to  
this guide, your television box should include:  
Two AA  
Batteries  
1 Remote Control  
1 Television  
POWER  
SLEEP SUB CH V.STATUS SOUND  
1
4
2
5
8
0
3
6
7
TUNE  
9
RETURN+/TV  
V1  
V2  
V3  
V4  
V5  
MUTING  
CH+  
VOL  
VOL  
+
FAV.  
CH–  
Note: Your television  
and/or remote  
ML/MTS DISPLAY  
MENU  
C.C.  
ASPECT  
BACK  
GUIDE  
control may differ  
from the examples  
illustrated here.  
POWER  
OK  
RMT-CV1291  
1 Cover  
1 Screw  
We recommend that before you start using your new television, you read this entire User’s  
Guide so you can learn about your new television’s many great features. If you’re anxious to  
start using your television right away, a quick setup guide follows on the next few pages.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
TV Models  
Before you connect your television to another device, please refer to the proper diagrams for  
your specific TV and remote. These will help assist you in understanding how to connect your  
television to another device, as well as use the remote to set up your television.  
Rear Panel Diagram  
INPUT  
1
INPUT  
2
75  
Ω
DIGITAL AD
OPTICAL
PHOTO VIEWER  
SERVICE  
/
(VHF/UHF)  
INPUT  
3
INPUT  
4
INPUT  
5
AUDIO OUT  
S-VIDEO  
Y
VIDEO  
Y
VIDEO  
VIDEO  
P
B
L
PB  
L
L
L
PR  
R
PR  
R
R
R
INPUT 3  
S-VIDEO  
INPUT 4  
INPUT 5 AUDIO OUT  
VIDEO  
Y
VIDEO  
Y
VIDEO  
PB  
L
PB  
L
L
L
PR  
R
PR  
R
R
R
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER /  
SERVICE  
Side Panel Diagram  
INPUT  
U
N
ME  
+
CHANNEL  
-
OK  
+
VOLUME  
-
BACK  
POWER  
POWER  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Remote Control  
POWER  
SLEEP SUB CH V.STATUS SOUND  
1
4
2
5
8
0
3
6
7
TUNE  
9
RETURN+/TV  
V1  
V2  
V3  
V4  
V5  
MUTING  
CH+  
VOL  
VOL  
+
FAV.  
CH–  
ML/MTS DISPLAY  
MENU  
C.C.  
ASPECT  
BACK  
GUIDE  
OK  
RMT-CV1291  
RM-C1291  
Notes:  
• For information on remote control buttons, see pages 57 - 64.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Getting Started  
These quick setup pages will provide you, in three easy steps, with the basic information you  
need to begin using your new television right away. If you have questions, or for more detailed  
information on any of these steps, please consult other sections of this manual.  
Step 1 – The Remote Control  
Before you can operate your remote control, you first need to  
install the batteries (included).  
Raise the latch on the remote's back cover to remove. Insert  
two batteries, carefully noting the "+" and "–" markings, and  
place the "–" end in the remote first. Snap the cover back into  
place.  
Basic Operation  
POWER  
Turn the television on and off by pressing the POWER button at the top right  
corner of the remote. If this is the first time you are turning on the TV, the  
interactive plug-in menu appears.  
Using Menu Buttons  
MENU  
BACK  
To use the menu functions, press the MENU button. Next,  
select a menu using the four arrow keys. The four arrow keys  
are used only for menu selections.  
OK  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 2 - Connecting your devices  
To make these connections, you will use plugs like the ones illustrated below.  
Component Cables  
Coaxial Cables  
Composite Cables  
Audio Cables  
Used to connect an external  
antenna or cable TV system to your  
TV.  
Used to connect audio/video  
devices like VCRs, DVD players,  
stereo amplifiers, game consoles,  
etc.  
S-Video Cable  
Used to make video connections  
with S-Video VCRs, Camcorders  
and DVD players.  
Notes:  
• The following connection diagrams are examples.  
• After you are finished connecting your devices, plug the power cord into the nearest power  
outlet and turn on the TV.  
• If you follow these diagrams and the television does not work properly, contact your local  
cable operator.  
To connect a DVD player, see VCR Connection.  
• If you have a satellite television system, refer to the satellite TV manual.  
No VCR Connection  
TV Rear Panel  
Cable or Antenna  
Output  
Coaxial Cable  
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER  
SERVICE  
/
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
VCR • DVD Connection  
Notes:  
• Green, blue and red are the most common colors for DVD cables. Some models may vary  
colors. Please consult the user’s manual for your DVD player for more information.  
• Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete  
one set of connections (DVD or audio output) before starting the other to avoid accidentally  
switching the cables.  
You may also connect the DVD player to Input 1.  
Diagram #1  
Cable or Antenna  
Output  
VCR  
IN  
R
L
V
IN  
OUT  
OUT  
OR  
Coaxial Cable  
INPUT 3  
INPUT 4  
INPUT 5 AUDIO OUT  
S-VIDEO  
Y
VIDEO  
Y
VIDEO  
VIDEO  
P
B
R
L
P
B
L
L
L
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER /  
SERVICE  
P
R
P
R
R
R
R
TV Rear Panel  
Green  
Blue  
Y
P
P
B
Red  
R
AUDIO OUT  
OUT  
R
L
DVD Player  
Note:  
• If this connection setup does not work for you, try the connection setup on page 15.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Diagram #2  
Cable or Antenna  
Output  
IN  
Two-Way Splitter  
(Not supplied)  
OUT OUT  
VCR  
IN  
R
L
V
IN  
OUT  
Coaxial Cable  
OUT  
OR  
INPUT 3  
INPUT 4  
INPUT 5 AUDIO OUT  
VIDEO  
S-VIDEO  
Y
VIDEO  
Y
VIDEO  
P
B
R
L
P
P
B
R
L
L
L
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER /  
SERVICE  
P
R
R
R
R
TV Rear Panel  
Green  
Blue  
Y
P
P
B
Red  
R
AUDIO OUT  
OUT  
DVD Player  
R
L
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Camcorder  
You can connect a camcorder to you televison by using the input jacks located on the back of  
the television.  
TV Rear Panel  
OR  
CAMCORDER  
INPUT 3  
S-VIDEO  
INPUT 4  
INPUT 5 AUDIO OUT  
VIDEO  
Y
VIDEO  
Y
VIDEO  
P
B
R
L
P
B
R
L
L
L
P
R
P
R
R
R
1) Connect a yellow composite cable from the camcorder VIDEO OUT, into the VIDEO IN on  
the back of the TV, OR connect an S-Video cable from the camcorder to the back of the TV.  
2) Connect a white cable from the camcorder LEFT AUDIO OUT, into the LEFT AUDIO IN on  
the back of the TV.  
3) Connect a red cable from the camcorder RIGHT AUDIO OUT, into the RIGHT AUDIO IN on  
the back of the TV.  
Note:  
• If your camcorder is a mono sound model it will have only one AUDIO OUT. Connect it to the  
LEFT AUDIO IN on the back of the TV.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an External Amplifier  
TV Rear Panel  
Speaker  
Speaker  
Amplifier  
INPUT 3  
S-VIDEO  
INPUT 4  
INPUT 5 AUDIO OUT  
VIDEO  
Y
VIDEO  
Y
VIDEO  
P
B
R
L
P
B
R
L
L
L
P
R
P
R
R
R
1) Connect a white cable from the LEFT AUDIO OUTPUT on the back of the TV to the  
LEFT AUDIO INPUT on the amplifier.  
2) Connect a red cable from the RIGHT AUDIO OUTPUT on the back of the TV to the  
RIGHT AUDIO INPUT on the amplifier.  
Notes:  
• Refer to your amplifier’s manual for more information.  
You can use AUDIO OUTPUT for your home theater system.  
• If you have a device connected to INPUT-1 or INPUT-2, you will not be able to hear any  
audio from the AUDIO OUT on the back of the TV.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a Digital TV Receiver  
By connecting a Digital TV Receiver, high definition pictures can be displayed on your TV in  
their digital form.  
TV Rear Panel  
INPUT  
3
INPUT  
4
INPUT  
5
AUDIO OUT  
S-VIDEO  
Y
VIDEO  
Y
VIDEO  
VIDEO  
After the connections have been made,  
tighten the screw to secure the cables.  
P
B
R
L
P
B
L
L
L
P
R
PR  
R
R
R
HDMI to DVI Cable  
L
R
AUDIO OUT  
DIGITAL OUT  
INPUT  
1
INPUT  
2
75  
Ω
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER  
SERVICE  
/
(VHF/UHF)  
DTV Decoder  
TV Rear Panel  
1) Connect the HDMI to DVI Cable from the DIGITAL OUT on the back of your DTV decoder, to  
the HDMI INPUT-1 on the back of your television.  
2) Connect a red cable from the DTV decoder RIGHT AUDIO OUT, to the RIGHT AUDIO INPUT  
HDMI AUDIO IN "R" on the back of your television.  
3) Connect a white cable from the DTV decoder LEFT AUDIO OUT, to the LEFT AUDIO INPUT  
HDMI AUDIO IN "L" on the back of your television.  
• Personal computer compatibility cannot be guaranteed.  
• Use a HDMI to DVI cable (commercially available) in order to digitally connect the television  
with a DTV decoder.  
Notes:  
• If 480p signals (640x480 or 720x480) are displayed on the screen, the horizontal balance  
may be slightly shifted. Access the “HDMI Size” in the External Input menu to adjust it. (Refer  
to page 44.)  
• When you do the above connection, set "Video-1 Audio" in the External Input menu to  
"Analog". See "Video-1 Audio", page 44.  
• The Analog Audio input can only be used with the HDMI INPUT-1.  
• When setting the “Video-1 Audio - Analog/Digital” menu setting on the TV, please note that  
this setting only effects the HDMI INPUT-1 jack and that if you use a DVI to HDMI adapter this  
connection must be made to the HDMI INPUT-1 along with analog audio cables.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to a HDMI Compatible Device  
By connecting a HDMI compatible device, high definition pictures can be displayed on your  
TV in their digital form. Some HDMI devices can include DVD players, D-VHS or any HDMI  
compatible device.  
HDMI (High Definition Multimedia Interface) is the first industry supported, uncompressed, all  
digital audio/video interface. HDMI provides and interface between any audio/video source,  
such as a set-top box, DVD player, A/V receiver or an audio and/or video monitor, such as a  
digital television (DTV).  
HDMI Cable  
HDMI Compatible Device  
L
R
AUDIO OUT  
DIGITAL OUT  
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER /  
SERVICE  
TV Rear Panel  
1) Connect the HDMI Cable from the DIGITAL OUT on the back of your DTV or HDMI device, to  
the HDMI INPUT-1 on the back of your television.  
Notes:  
• When you do the above connection, set "Video-1 Audio" in the External Input menu to Digital.  
See "Video-1 Audio", page 44.  
• Some decoders may not respond depending on the equipment that is connected to the HDMI.  
• If the HDMI output device signal is changed (for example, 480i/60Hz is changed to  
480p/60Hz), the screen may turn green and there may be some distortion for a short time  
until the signal becomes stable.  
• This TV can accept 480i, 480p, 720p and 1080i signals via HDMI.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Connecting to an amplifier using your optical output  
You can connect an amplifier that has an optical digital input terminal by using an optical digital  
cable from the optical output. The signal that is output can be PCM or DOLBY DIGITAL.  
INPUT 1  
INPUT 2  
75 Ω  
(VHF/UHF)  
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER /  
SERVICE  
Amplifier  
TV Rear Panel  
1) Connect the optical cable from underneath the television to the back of the amplifier.  
Notes:  
• This terminal can only output digital audio.  
• In order to use the optical output connection, select PCM or DOLBY DIGITAL on Optical Out  
in the Sound Adjust Menu. See page 50.  
• Refer to your owners manual on using your amplifier.  
You cannot output sound from your Optical Output connection if the audio source is from  
your HDMI device.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Step 3 – The Interactive Plug In Menu  
When you turn your television on for the first time the interactive plug-in menu will appear. The  
plug-in menu helps you to get your TV ready to use by letting you set your preferences for:  
• The language in which you want the onscreen menus to appear.  
• Setting the TV’s clock to the correct time so your timer functions will work properly. You can  
choose “Auto” or “Manual” for setting the clock.  
• The auto tuner setup of which channels you wish to receive.  
We recommend you complete the interactive plug-in items before you start using your  
television.  
Note:  
• If you press the MENU button while setting up the interactive plug-in menu, it will skip over it.  
Language  
After the “JVC Interactive Plug-in Menu” has been displayed, the TV automatically switches  
to the "Language" settings. You can choose to view your onscreen menus in three languages:  
English, French or Spanish.  
Language/Langue/Idioma  
®  
To choose a language:  
(English, Français or Español.)  
To "Set"  
English  
Press the OK button  
Once you press OK, you will move to the  
"Set Clock" Plug-In Menu automatically.  
Set  
OK  
Select  
Operate  
MENU Exit  
(Continued...)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Clock Set  
You may set your clock using the time data sent via broadcasting.  
®  
To choose "Auto (Analog)" or "Auto (Digital)"  
To "Channel" when you selected "Auto (Digital)"  
Set Clock  
Mode  
Auto (Analog)  
– –  
®  
To select a receiving digital channel  
To "Time Zone"  
Channel  
Time  
10  
:
30  
AM  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
Time Zone  
D.S.T.  
Atlantic  
On  
Set  
®  
To move to "D.S.T." (Daylight Savings Time)  
To turn "On or Off"  
To "set"  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the OK button  
Once you press OK, you will move to the "Auto  
Tuner Setup" Plug-In Menu automatically.  
Notes:  
• "Channel" can be selected only when Mode is "Auto (Digital)". However, only when you are using  
"Auto (Digital)" for the first time, you cannot select "Channel".  
• D.S.T. can be used when it is set to "On" in the "Set Clock" menu.  
• Only when the Mode is set to "Auto", the Daylight Saving Time feature automatically adjusts your  
TV’s clock for Daylight Saving.  
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and  
receiving conditions. In this case, set your clock manually.  
You will have to reset the clock after a power interruption. You must set the clock before operating  
any timer functions.  
Manual Clock Set  
To set your clock manually, choose "Manual". If you choose "Auto", see auto clock set above.  
®  
To choose "Manual"  
To "Time"  
Set Clock  
®  
®  
To set the hour  
To minute  
To set the minute  
To "Time Zone"  
Mode  
Manual  
– –  
Channel  
Time  
10  
:
30  
Atlantic  
On  
AM  
Time Zone  
D.S.T.  
Set  
®  
To select your time zone: (Atlantic, Eastern,  
Central, Mountain, Pacific, Alaska or  
Hawaii)  
BACK  
Select  
Operate  
Back  
MENU Exit  
®  
To move to "D.S.T." (Daylight Savings Time)  
To turn "On or Off"  
To "Set"  
Press the OK button  
Once you press OK, you will move to the "Auto  
Tuner Setup" Plug-In Menu automatically.  
Note:  
You will have to reset the clock after a power interruption. You must set the clock before operating  
any timer functions.  
(Continued...)  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Setup  
Auto Tuner Setup  
In auto tuner setup, the TV automatically scans through all available channels, memorizing the  
active ones and skipping over blank ones or channels with weak signals. This means when you  
scan (using the CHANNEL +/– buttons) you will receive only clear, active channels.  
Auto Tuner Setup  
®  
To choose "Cable or "Air" (or "Skip" when  
you skip "Auto Tuner Setup")  
Tuner Mode  
Scan Mode  
Air  
π†  
®  
To Scan Mode  
To choose Auto, STD, HRC or IRC  
Auto  
To "Start"  
Start  
Press the OK button  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Now Programming...  
8
When the setup is finished, "Thank you ! Setup is now complete." is displayed. Your quick  
setup is now complete. You can now begin watching your television, or you can continue  
on in this guide for more information on programming your remote control, or using the  
JVC onscreen menu system to customize your television viewing experience.  
Notes:  
• If you want to cancel the Auto Tuner Setup, press the MENU button.  
• Noise muting will not work during Auto Tuner Setup.  
• If you choose "Skip", it finished without doing the Auto Tuner Setup.  
Cable Users: After your auto tuner setup is complete, you may, (depending on the type of  
hookup), have only 1 channel, usually 3 or 4 in the auto tuner memory. This is normal.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Using the Guide  
Certain symbols are used throughout this guide to help you learn about the features of your  
new television. The ones you will see most frequently are:  
πUp and Down arrows mean:  
• Move vertically in a main menu screen  
• Move through a submenu screen  
• Move to the next letter, number, or other choice in a submenu  
• Back up to correct an error  
® Left and right arrows mean:  
• Select a highlighted menu item  
• Select an item in a submenu  
• Select numbers in certain menu options  
The “press button” icon means you should press the button named on your remote  
control. (Button names appear in SMALL CAPITAL LETTERS.)  
The “helping arrow” icon points to the highlighted or selected item in a menu.  
To bring up the onscreen menu, press the MENU button on the remote control. The following  
(left) main menu will appear. The item that appears in orange is the one currently selected.  
If you use the MENU button on the TV’s side panel instead of the remote, Front Menu screen  
showing "Video Status", "Aspect", "Auto Tuner Setup" and "Menu" will appear (following right  
screen). The “Interactive Plug-in Menu” will appear the first time the TV is plugged in.  
Front Menu  
Menu  
Initial Setup  
Video Status  
Standard  
+
Tuner Setup  
Aspect  
Panorama  
External Input  
Picture Adjust  
Sound Adjust  
Clock/Timers  
Interactive Plug-in Menu  
Photo Viewer  
Auto Demo  
Auto Tuner Setup  
Menu  
Exit  
MENU Select  
Operate  
Note:  
• Menus shown in this book are illustrations, not exact replications of the television’s onscreen  
displays.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
The Onscreen Menu System  
Your television comes with JVC’s onscreen menu system. The onscreen menus let you make  
adjustments to your television’s operation simply and quickly. All menus are navigated from  
the Main Menu at first. Detailed explanations on using each menu follow later in this guide. For  
information about the interactive plug-in Menu, see pages 21 - 23.  
1. To open the onscreen menu system, press the MENU button on the remote control. The  
main menu will appear  
Menu  
Initial Setup  
+
Tuner Setup  
External Input  
Picture Adjust  
Sound Adjust  
Clock/Timers  
Interactive Plug-in Menu  
Photo Viewer  
Auto Demo  
2. To select a menu from the main menu, use the πarrows and enter by using the ®  
arrows or OK button.  
The selected feature and option on a menu screen are highlighted in a different color.  
To move to a different feature, use the πarrows to move up and down the list.  
3. There are two methods to select an option in a menu, after selecting a menu using the π†  
arrows.  
1) Use the ® arrows to select an option from the highlighted feature. (In this guide, we  
discuss this method).  
+
Tuner Setup > Auto Tuner Setup  
2) Press the OK button. The right onscreen will  
appear. Use the πarrows to select an option  
from the box and press the OK button.  
Tuner Mode  
Scan Mode  
Cable  
Auto  
Auto  
STD  
HRC  
IRC  
• To go back to the previous screen, press the BACK  
button.  
Start  
4. Pressing MENU on the remote control will close the  
onscreen menu system and return you to normal  
television viewing.  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Each menu and its features will be discussed in the following pages of this guide.  
Notes:  
• If you do not press any buttons for a few seconds, the onscreen menu will automatically  
shut off.  
• Button names in this guide are shown in SMALL CAPITAL LETTERS.  
• Some menu items may not appear in menu screens when certain aspect ratios or inputs  
are selected.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
Menu  
The left main menu will appear  
Initial Setup  
+
π†  
To select a menu from the main menu  
To enter  
Tuner Setup  
®  
External Input  
Picture Adjust  
Sound Adjust  
Clock/Timers  
Interactive Plug-in Menu  
Photo Viewer  
Auto Demo  
The following menu you selected will appear  
Press the BACK button to return to the previous menu  
screen  
Initial Setup  
1/2  
Initial Setup  
2/2  
Noise Muting  
On  
English  
Off  
Auto Shut Off  
On  
Language  
Software Version  
Power Indicator  
Quick Start-up  
Front Panel Lock  
V-Chip  
Low  
On  
Set Lock Code  
Closed Caption  
BACK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Select  
Operate  
Back  
MENU Exit  
Initial Setup 1/2  
Initial Setup 2/2  
+
Tuner Setup  
Auto Tuner Setup  
Channel Summary  
Find Channel  
Digital Antenna Level  
BACK  
Select  
Operate  
Back  
MENU Exit  
Tuner Setup  
External Input  
HDMI Size  
Auto  
Video-1 Audio  
Video Input Label  
Digital  
BACK  
Select  
Operate  
Back  
MENU Exit  
External Input  
Picture Adjust  
1/2  
Picture Adjust  
2/2  
Video Status  
0
Standard  
Video Status  
Standard  
Tint  
Color Management  
On  
Off  
Off  
Off  
Color  
0
0
0
0
0
Dynamic Gamma  
Noise Reduction  
Natural Cinema  
Position Adjustment  
Reset  
Picture  
Bright  
Detail  
Energy Saver Mode  
Color Temperature  
High  
OK  
BACK  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Select  
Operate  
Back  
MENU Exit  
Picture Adjust 1/2  
Picture Adjust 2/2  
Note:  
• The HDMI Size menu can only be displayed when a 480p picture signal is input to the HDMI  
terminal and the picture is being displayed on the screen.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Onscreen Menus  
Press the MENU button  
Menu  
The left main menu will appear  
Initial Setup  
+
π†  
To select a menu from the main menu  
To enter  
Tuner Setup  
®  
External Input  
Picture Adjust  
Sound Adjust  
Clock/Timers  
Interactive Plug-in Menu  
Photo Viewer  
Auto Demo  
The following menu you selected will appear  
Press the BACK button to return to the previous menu  
screen  
Sound Adjust  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
Reset  
BACK  
Select  
Operate  
Back  
MENU Exit  
Sound Adjust  
Clock/Timers  
Set Clock  
On / Off Timer  
BACK  
Select  
Operate  
Back  
MENU Exit  
Clock/Timers  
Language/Langue/Idioma  
English  
Set  
OK  
Select  
Operate  
MENU Exit  
Interactive Plug-in Menu  
Photo Viewer  
Multi-Screen  
Slide Show  
Interval Time (sec)  
5
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Photo Viewer  
Note:  
• For Auto Demo, see page 56  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Noise Muting  
This feature inserts a blank black screen over channels which are not broadcasting or are too  
weak to be received clearly.  
Initial Setup  
1/2  
Press the MENU button  
Noise Muting  
On  
English  
Off  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Noise Muting"  
To turn "On" or "Off"  
Press the MENU button when finished  
Language  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
BACK  
Select  
Operate  
Back  
MENU Exit  
Note:  
• Noise muting will not work when you operate channel summary.  
Language  
The language function is described on page 21 as the interactive plug-in menu. If you need to  
choose the language again, follow the steps below.  
Press the MENU button  
Initial Setup  
1/2  
π†  
®  
π†  
To "Initial Setup"  
To enter  
To "Language"  
Noise Muting  
On  
English  
Off  
Language  
Front Panel Lock  
V-Chip  
®  
To choose a language: English, Français or  
Español  
Set Lock Code  
Closed Caption  
Press the MENU button when finished  
BACK  
Select  
Operate  
Back  
MENU Exit  
Front Panel Lock  
This allows you to lock the keys on the side of the TV, so that a child may not accidentally  
change your viewing preferences.  
Initial Setup  
1/2  
Press the MENU button  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Front Panel Lock"  
To turn "On" or "Off"  
Press the MENU button when finished  
Noise Muting  
Language  
On  
English  
Off  
Front Panel Lock  
V-Chip  
Set Lock Code  
Closed Caption  
BACK  
Select  
Operate  
Back  
MENU Exit  
You can turn off this feature in the following ways:  
– Unplug the power cord, and plug it back in. Do this if your batteries die, or you lose your  
remote control.  
– Use the remote control.  
– Press the MENU button on the front of the TV for more than 3 seconds. In this case, the OSD  
for "Front Panel Lock" will appear.  
Note:  
To turn On/Off the TV, press the POWER button on the front of the TV for more than 3  
seconds. This feature will remain On.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
V-Chip  
Your TV is equipped with V-Chip technology which enables you to block channels or content  
that you feel to be inappropriate for children, based on US and Canada rating guidelines.  
V-Chip has no effect on video signals from a DVD discs, VCR tapes or Camcorder connection.  
Note: Some programs, and movies are broadcast without a ratings signal. Even if you set up  
V-Chip ratings limits, these programs will not be blocked. See page 34 for information on how  
to block unrated programs.  
Note (for Canadian viewers): The V-Chip function is based on specifications designed for  
the United States and therefore may not work properly in Canada.  
You can customize the V-Chip settings of your television to match your personal tastes. The  
V-Chip menu below is the starting point for your V-Chip settings  
You can use US V-Chip settings (for programming broadcast from the United States), Canadian  
V-Chip settings (for programming broadcast from Canada), and movie ratings. You may use  
any or all of the settings (US V-Chip, Canada V-Chip, Movie ratings). Descriptions for setting  
each of the three V-Chip formats appear in the next six pages along with descriptions of the  
rating categories.  
To access the rating categories:  
Initial Setup > V-Chip  
Press the MENU button  
V-Chip  
On  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will  
appear)  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Advanced V-Chip Rating  
Advanced Canadian Rating  
Unrated  
View  
BACK  
Enter the password by using the 10 button  
keypad  
Select  
Operate  
Back  
MENU Exit  
The V-Chip main screen will appear when the password is correct.  
®  
To turn V-Chip "On" or "Off" (V-Chip must be turned "On" for rating settings to  
operate)  
π†  
To move to V-Chip menu (see following pages for descriptions of each item)  
Notes:  
• If you input the wrong password, go back to the initial Setup Menu.  
To set the password, see "Set Lock Code", page 35.  
• "Advanced V-Chip Rating" and "Advanced Canadian Rating" menus may be displayed  
sometimes between "Set Canadian Ratings French" and "Unrated". It depends on the  
broadcasting if they will be displayed or not.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
US V-Chip Ratings  
U.S. PARENTAL RATING SYSTEMS  
Programs with the following ratings are appropriate for children.  
TV Y is Appropriate for All Children  
Programs are created for very young viewers and should be suitable for all ages, including  
children ages 2 - 6.  
TV Y7 is for Older Children  
Most parents would find such programs suitable for children 7 and above. These programs  
may contain some mild fantasy violence or comedic violence, which children should be able  
to discern from reality.  
Programs with the following ratings are designed for the entire audience.  
TV G stands for General Audience  
Most parents would find these programs suitable for all age groups. They contain little or no  
violence, no strong language, and little or no sexual dialog or situations.  
TV PG Parental Guidance Suggested  
May contain some, but not much, strong language, limited violence, and some suggestive  
sexual dialog or situations. It is recommended that parents watch these programs first, or  
with their children.  
TV 14 Parents Strongly Cautioned  
Programs contain some material that may be unsuitable for children under the age of 14  
including possible intense violence, sexual situations, strong coarse language, or intensely  
suggestive dialog. Parents are cautioned against unattended viewing by children under 14.  
TV MA Mature Audiences Only  
These programs are specifically for adults and may be unsuitable for anyone under 17  
years of age. TV MA programs may have extensive V, S, L, or D.  
Viewing Guidelines  
In addition to the ratings categories explained above, information on specific kinds of content  
are also supplied with the V-Chip rating. These types of content may also be blocked. The  
content types are:  
V/FV is for VIOLENCE/FANTASY VIOLENCE  
S stands for SEXUAL CONTENT  
L stands for strong LANGUAGE  
D stands for suggestive DIALOG  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Setting US V-Chip Ratings  
Press the MENU button  
Initial Setup > V-Chip  
V-Chip  
On  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will  
appear)  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Advanced V-Chip Rating  
Advanced Canadian Rating  
Unrated  
View  
Enter the password by using the 10 button  
keypad  
BACK  
Select  
Operate  
Back  
MENU Exit  
The V-Chip main screen will appear  
®  
π†  
®  
To turn V-Chip "On" or "Off"  
To move to "Set US TV Ratings"  
To operate  
Directions to set US V-Chip Ratings  
Line up the cursor in the column (TV PG, TV G, etc.) with the content row (V/FV, S, etc.) and  
press the πor ® to move the cursor to the correct location. Press OK to turn the locking  
feature on or off. An item is locked if the  
icon appears instead of a “—”.  
For example. To block viewing of all TV 14 shows, move the cursor to the top row of that  
column and add a lock icon. Once you’ve put a lock on the top row, everything in that column  
is automatically locked.  
Set US TV Ratings  
π® To the TV 14 Column  
TV  
TV  
14  
TV  
PG  
TV  
G
TV  
Y7  
TV  
Y
MA  
Press the OK button to lock  
V/FV  
Press the MENU button when finished  
S
L
D
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Movies Ratings  
NR – Not Rated  
This is a film which has no rating. In many cases these films were imported from countries  
which do not use the MPAA ratings system. Other NR films may be from amateur producers  
who didn’t intend to have their film widely released.  
NR (Not Rated) Programming may contain all types of programming including children’s  
programming, foreign programs, or adult material.  
G – General Audience  
In the opinion of the review board, these films contain nothing in the way of sexual content,  
violence, or language that would be unsuitable for audiences of any age.  
PG – Parental Guidance  
Parental Guidance means the movie may contain some contents such as mild violence,  
some brief nudity, and strong language. The contents are not deemed intense.  
PG-13 – Parents Strongly Cautioned  
Parents with children under 13 are cautioned that the content of movies with this rating may  
include more explicit sexual, language, and violence content than movies rated PG.  
R – Restricted  
These films contain material that is explicit in nature and is not recommended for  
unsupervised children under the age of 17.  
NC-17 – No One Under 17  
These movies contain content which most parents would feel is too adult for their children  
to view. Content can consist of strong language, nudity, violence, and suggestive or explicit  
subject matter.  
X – No One under 18  
Inappropriate material for anyone under 18.  
Directions to set Movie (MPAA) Ratings  
Press the MENU button  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will appear)  
Enter the password by using the 10 button keypad  
The V-Chip main screen will appear  
To turn V-Chip "On" or "Off"  
®  
π†  
®  
To "Set Movie Ratings"  
To enter movies menu  
For example:  
Set US Movie Ratings  
NC  
To block viewing of X and NC-17 rated from shows:  
®  
®  
To the X Column  
PG  
13  
Press the OK button to lock  
To the NC-17 Column  
X
R
PG  
G
NR  
17  
Press the OK button to lock  
Press the MENU button to finish  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Canadian V-Chip Ratings  
E – Exempt  
Exempt programming includes: news, sports, documentaries and other information  
programming, talk shows, music videos, and variety programming.  
C – Programming Intended for Children  
Violence Guidelines: There will be no realistic scenes of violence. Depictions of aggressive  
behavior will be infrequent and limited to portrayals that are clearly imaginary, comedic or  
unrealistic in nature.  
C8+ – Programming Intended for Children 8 and Over  
Violence Guidelines: Any realistic depictions of violence will be infrequent, discreet, of low  
intensity and will show the consequences of the acts. There will be no offensive language,  
nudity or sexual content.  
G – General Audience  
Programming will contain little violence and will be sensitive to themes which could affect  
younger children.  
PG – Parental Guidance  
Programming intended for a general audience, but which may not be suitable for younger  
children. Parents may consider some content not appropriate for children aged 8-13.  
14+ – 14 Years and Older  
Parents are strongly cautioned to exercise discretion in permitting viewing by pre-teens and  
early teens. Programming may contain mature themes and scenes of intense violence.  
18+ – Adult  
Material intended for mature audiences only.  
Directions to set Canadian V-Chip Ratings  
Press the MENU button  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
To operate (Password input screen will appear)  
Enter the password by using the 10 button keypad  
The V-Chip main screen will appear  
To turn V-Chip "On" or "Off"  
Set Canadian Ratings English  
®  
π†  
®  
To "Set Canadian Ratings English"  
To enter ratings menu  
18+  
14+  
PG  
G
C8+  
C
For example:  
To block viewing of programming rated 18+ and 14+:  
®  
To the 18+ Column  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the OK button to lock  
To the 14+ Column  
®  
Press the OK button to lock  
Press the MENU button to finish  
Note:  
• For instructions on “Set Canadian Ratings Fre (in French)”, please see page 33 in the  
French user’s guide.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Unrated Programs  
Unrated programming refers to any programming which does not contain a rating signal.  
Programming on television stations which do not broadcast rating signals will be placed in the  
“Unrated Programming” category.  
Examples of Unrated programs:  
• Emergency Bulletins  
• News  
• Public Service Announcements  
• Sports  
• Locally Originated Programming  
• Political Programs  
• Religious Programs  
• Weather  
• Some Commercials  
Note:  
• TV programs or movies that do not have rating signals will be blocked if the unrated category  
is set to "Block".  
Directions to Block Unrated Programs  
You can block programs that are not rated.  
Press the MENU button  
Initial Setup > V-Chip  
V-Chip  
On  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "V-Chip"  
Set US TV Ratings  
Set Movie Ratings  
Set Canadian Ratings English  
Set Canadian Ratings French  
Advanced V-Chip Rating  
Advanced Canadian Rating  
Unrated  
To operate (Password input screen will appear)  
Enter the password by using the 10 button  
keypad  
View  
BACK  
Select  
Operate  
Back  
MENU Exit  
The V-Chip main screen will appear  
®  
π†  
®  
To turn V-Chip "On" or "Off"  
To "Unrated"  
To "View" or "Block"  
Press MENU when done  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Set Lock Code  
Channel guard and V-Chip settings are protected by a four-digit lock code. Your TV comes pre-  
set with a lock code of “0000”. You may change the code to any four-digit number you wish. To  
change the lock code, follow the steps below.  
Press the MENU button  
Initial Setup > Set Lock Code  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Set Lock Code"  
To operate (Password input screen will appear)  
Lock Code  
0
1
2
3
Set  
Clear  
Enter the password by using the 10 button  
keypad  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
The Set Lock Code screen will appear  
To set the password, use the 10 button keypad  
Press the OK button to finish (your lock code is now set)  
When a viewer attempts to watch a blocked channel,  
this message appears:  
This programming exceeds  
your rating limits.  
Please enter lock code  
by 10 key pad to unlock it.  
The channel will remain blocked until the correct lock  
code is entered (see above for information on setting  
your lock code).  
No. - - - -  
Notes:  
• After a power interruption you must reset the lock code.  
• Write your lock code number down and keep it hidden from potential viewers.  
• If you forget the lock code, a new code may be set using the steps listed above.  
Channel Guard Message  
When a viewer attempts to watch a guarded channel, the following message appears:  
To watch a channel that you have locked, enter the  
This channel is locked  
by channel guard.  
Please enter lock code  
by 10 key pad to unlock it.  
No. - - - -  
Lock Code using the 10 key pad.  
If the wrong code is entered, the message "Invalid Lock  
Code !” will flash on the screen.  
The channel cannot be accessed until the correct code  
is entered.  
Notes:  
• Once a channel has been unlocked, it will remain unlocked until the television is turned off.  
• See also “Set Lock Code”.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Closed Caption  
Many broadcasts now include an onscreen display of dialog called closed captions. Some  
broadcasts may also include displays of additional information in text form. Your television can  
access and display this information using the closed caption feature. To activate the closed  
caption feature, follow the steps below.  
Auto Setting  
Initial Setup > Closed Caption  
Press the MENU button  
Preview  
π†  
®  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Closed Caption"  
To enter  
To "Type"  
To select Auto, Advanced or Basic  
Closed Caption Sample  
Type  
Auto  
Text1  
1
Analog Service  
Digital Service  
Appearance  
Reset  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Auto: Shows closed caption a priority for  
digital channels over analog channels. It is set automatically.  
Advanced: Shows only the digital closed caption.  
Basic: Shows only the analog closed caption.  
π†  
®  
π†  
®  
π†  
®  
®  
To "Analog Service"  
To select a caption (CC1 to CC4) or text channel (Text1 to Text4)  
To "Digital Service"  
To select 1, 2, 3, 4, 5 or 6  
To "Appearance"  
To enter  
To select "Auto" ("Manual", see page 37)  
Press the MENU button when finished  
Notes:  
• If you want to reset your settings to the default settings, select "Reset".  
• If you select "Advanced" for Type, you cannot select "Analog Service".  
• If you select "Basic" for Type, you cannot select "Digital Service" and "Appearance".  
• "Type", "Digital Service" and "Appearance" are for digital broadcasting. It has no  
effect for analog broadcasting.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Manual Setting  
Closed Caption > Appearance  
Preview  
1/2  
®  
To select "Manual" for Appearance Mode  
π†  
To "Font Size", "Font Style", "Text/Edge  
Opacity", "Background Opacity", "Text Color",  
"Edge Color" or "Backgrond Color"  
Closed Caption Sample  
Appearance Mode  
Font Size  
Manual  
Standard  
Auto  
Font Style  
®  
To select the setting you like  
Text / Edge Opacity  
Background Opacity  
Solid  
Solid  
Font Size: Auto, Standard, Large or Small  
BACK  
Select  
Operate  
Back  
MENU Exit  
Font Style: Auto, SerifMono, Serif, SanSerifMono,  
Closed Caption > Appearance  
Preview  
2/2  
SanSerif, Casual, Cursive or SmallCapital  
Text/Edge Opacity, Background Opacity: Auto,  
Transparent, Translucent, Solid, Flashing  
Closed Caption Sample  
Text Color  
White  
White  
Black  
Text Color, Edge Color, Background Color: Auto,  
White, Black, Red, Green, Blue, Yellow, Magenta, or  
Cyan  
Edge Color  
Background Color  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the MENU button when finished  
All fonts are licensed from  
Monotype Imaging Inc.  
Notes:  
• Closed caption subtitles are usually found on closed caption channel CC1. Some programs  
may include additional text information which is usually found on text channel Text1. The  
other channels are available for future use.  
• Closed captioning may not work correctly if the signal being received is weak or if you are  
playing a video tape.  
• Most broadcasts containing closed captioning will display a notice at the start of the program.  
To select the mode, press the C.C. button. See page 60.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Auto Shut Off  
This function automatically shuts off your TV when there is no signal from the channel the  
TV is on for 10 minutes.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Auto Shut Off"  
To turn "On" or "Off"  
Auto Shut Off  
On  
Software Version  
Power Indicator  
Quick Start-up  
Low  
On  
Press the MENU button when finished  
BACK  
Select  
Operate  
Back  
MENU Exit  
• If the channel that you have on does not receive a  
signal for more than one minute, the blinking text “No  
Program or Weak Signal Auto shut off in 9 min.” appears on the screen, and starts the  
countdown. If no signal is being received within 10 minutes, the TV shuts itself off.  
Software Version  
You can confirm the Software Version.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
®  
To "Initial Setup"  
To enter  
To "Software Version"  
To enter  
Select close when you are finished confirming  
your software version  
Auto Shut Off  
On  
Software Version  
Power Indicator  
Quick Start-up  
Low  
On  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the MENU button when finished  
Power Indicator  
Power indicator allows you to adjust the brightness of the power indicator  
Initial Setup  
2/2  
Press the MENU button  
Previous  
Auto Shut Off  
On  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Power Indicator"  
To turn "High", "Low", "Off"  
Software Version  
Power Indicator  
Quick Start-up  
Low  
On  
Press the MENU button when finished  
BACK  
Select  
Operate  
Back  
MENU Exit  
Notes :  
• When Off is selected :  
The LED disappears if you have a TV signal.  
The LED is lit as “Low” when there is no TV signal.  
• When the On Timer turns On, the LED is lit as "Low" when you turn the power off.  
• If you set a timer on the TV, the power indicator will light even if the TV is on stand by.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Setup  
Quick Start-up  
Quick Start-up allows you to lessen the time for the TV to turn on and ready for viewing.  
Press the MENU button  
Initial Setup  
2/2  
π†  
®  
π†  
®  
To "Initial Setup"  
To enter  
To "Quick Start-up"  
To turn "On" or "Off"  
Auto Shut Off  
On  
Software Version  
Power Indicator  
Quick Start-up  
Low  
On  
Press the MENU button when finished  
BACK  
Select  
Operate  
Back  
MENU Exit  
Notes:  
• Standby power consumption is higher when you have  
this feature turned on.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
Auto Tuner Setup  
The auto tuner setup function is described on page 23 as the interactive plug-in menu. If you  
need to run the auto tuner setup again, follow the steps below.  
+
Tuner Setup > Auto Tuner Setup  
Press the MENU button  
π†  
®  
π†  
®  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Auto Tuner Setup"  
To enter  
To choose "Cable" or "Air"  
To "Scan Mode"  
To choose "Auto", "STD", "HRC" or "IRC"  
To "Start"  
Tuner Mode  
Scan Mode  
Air  
Auto  
Start  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the OK button (Programming will take serveral minutes)  
The auto tuner is finished when the message "Programming Over !" appears onscreen.  
Notes:  
• When the Tuner Mode is set to "Cable", it is possible to select "Scan Mode"  
• If no channels were found using Auto Tuner Setup, check your antenna cable and the  
settings for Tuner Mode/Scan Mode.  
You can also access the "Front Menu" screen by using the MENU button on the side of the  
TV instead of the remote control. It has "Video Status", "Aspect", "Auto Tuner Setup" and  
"Menu". Choose "Auto Tuner Setup" by pressing MENU  
on the side panel and enter by  
using the CHANNEL +/- buttons (  
OPERATE  
®
).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
Channel Summary  
Channel summary allows you to customize the line-up of channels received by your TV. You  
can add or delete channels from the line-up or prevent any unauthorized viewers from watching  
any or all channels.  
Press the MENU button  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
+
Tuner Setup > Channel Summary  
Ch No.  
001  
Scan  
Station  
FOX  
002  
ABC  
CNN  
NBC  
BOX  
NHK  
003  
A channel having the Scan mark “” can be selected  
by using CH+/- (channel +/-) button. You can delete  
channels from the scan by removing the “”.  
004  
005  
006  
π® To the "Scan" column  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the OK button to include or delete from  
scan  
Press the MENU button when finished  
Note:  
• The number of a digital channel may change, depending on the time of some broadcastings.  
If this channel existed and now has disappeared, the lock channel or scanned channel mark  
by the channel summary for that channel will be cancelled.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
How to set the channel station.  
Press the MENU button  
+
Tuner Setup > Channel Summary > Station  
π†  
®  
π†  
®  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
Ch No.  
9
Set  
Reset  
To "Station"  
BACK  
MENU Exit  
Press the OK button to enter  
Select  
Operate  
Back  
®  
π†  
To select the character you want  
To move to the next space  
...continue to follow these directions for all seven spaces  
To "Set"  
π†  
Press the OK button  
Your characters are now set  
Press the MENU button when finished  
If you want to reset the characters you set:  
Press the MENU button  
π†  
®  
π†  
®  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
To "Station"  
Press the OK button to enter  
To select "Reset"  
π†  
Press the OK button to finish  
Your characters are now reset  
Press the MENU button when finished  
Notes:  
You can use characters for: Alphabet, numbers, marks and spaces.  
• It is possible to set the maximum of 500 channel labels.  
• If you try to set more than the 500 maximum, the message "Memory Overflow" will appear.  
You can block access to a channel by activating the channel lock.  
Press the MENU button  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Channel Summary"  
To operate  
π® To the Lock Column (  
)
Press the OK button to lock or unlock that channel  
Press the MENU button when finished  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner Setup  
Find Channel  
Add a digital channel that does not exist in the channel map.  
+
Press the MENU button  
Tuner Setup  
π†  
®  
π†  
®  
To "Tuner Setup"  
To enter  
To "Find Channel"  
To enter  
Auto Tuner Setup  
Channel Summary  
Find Channel  
Find Channel  
Digital Antenna L
Channel Num.  
Add  
_
Cancel  
Add a channel using 0 to 9  
0
9
OK  
BACK  
MENU Exit  
...  
Select  
Operate  
Back  
To "Add"  
Press the OK button to finish  
Digital Antenna Level  
Confirms the present antenna level.  
Digital Antenna Level  
Press the MENU button  
100  
BACK  
MENU  
π†  
To "Tuner Setup"  
To enter  
Back  
Exit  
®  
π†  
To "Digital Antenna Level"  
To enter  
®  
Note:  
• If you are watching an analog channel, antenna level will not appear.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Input  
HDMI Size  
The HDMI Size option can only be displayed in the External Input menu when an HDMI 480p  
picture signal is being input to the HDMI terminal. This option adjusts the position when an  
HDMI or DVI 480p picture signal is being displayed on the screen. There are two types of  
HDMI 480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted,  
the position can be adjusted by selecting Auto, Size1 or Size2.  
External Input  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To "External Input"  
To enter  
To "HDMI Size"  
HDMI Size  
Auto  
Video-1 Audio  
Video Input Label  
Digital  
To enter  
To select "Auto", "Size1" or "Size2"  
BACK  
Press the MENU button to finish  
Select  
Operate  
Back  
MENU Exit  
Notes:  
• The HDMI Size menu can only be displayed when a HDMI or DVI 480p picture signal is input  
to the HDMI terminal and the picture is being displayed on the screen.  
You can select "Auto" only when the signal is 480p for HDMI. When you select "Auto", the  
television will select "Size1" or "Size2" automatically.  
Video-1 Audio  
This feature is used if you have a DVI or HDMI compatible component connected to your TV.  
Press the MENU button  
External Input  
π†  
®  
π†  
®  
To "External Input"  
To enter  
To "Video-1 Audio"  
To select "Analog", "Digital" or "Auto"  
HDMI Size  
Auto  
Video-1 Audio  
Video Input Label  
Digital  
Press the Menu button when nished  
BACK  
Select  
Operate  
Back  
MENU Exit  
Notes:  
• If your DVI or HDMI component is capable of digital  
audio and video, choose "Digital". If your DVI or HDMI  
component is capable of analog audio and digital video, choose "Analog".  
• Refer to your DVI or HDMI component’s instruction manual for more information.  
• When you select "Auto", the television will select "Analog" or "Digital" automatically, depending  
on the audio input from the HDMI.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
External Input  
Video Input Label  
This function is used to label video input connections for the onscreen displays.  
Press the MENU button  
To "External Input"  
To enter  
External Input  
π†  
®  
π†  
®  
π†  
®  
HDMI Size  
Auto  
Video-1 Audio  
Video Input Label  
Digital  
To "Video Input Label"  
To operate  
BACK  
Select  
Operate  
Back  
MENU Exit  
To select the desired video input  
To select the desired preset input label (see  
chart below)  
External Input > Video Input Label  
Press the MENU button when finished  
Video-1  
Video-2  
Video-3  
Video-4  
Video-5  
PVR  
DVD  
SAT  
GAME  
VCR  
Reset  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Preset  
Labels  
Select when...  
VCR  
DVD  
PVR  
You have a VCR connected to the video input  
You have a DVD connected to the video input  
You have a Personal Video recorder connected to the video input  
D-VHS You have a Digital VCR connected to the video input  
STB  
SAT  
AMP  
You have a Set-top Box connected to the video input  
You have a Satellite Receiver connected to the video input  
You have an Amplifier connected to the video input  
GAME You have a Video Game connected to the video input  
CAM  
DISC  
You have a Video Camera connected to the video input  
You have a Video Disc player connected to the video input  
Note:  
To reset to the default setting, πto select "Reset", then press the OK button.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Picture Settings  
These settings allow you to change and adjust the way the picture appears on your television.  
Tint  
Tint allows you to adjust the levels of red and green in your TV picture.  
Color  
The color function lets you make all the colors in the TV picture appear either more vivid or  
subtle.  
Picture  
Picture allows you to adjust the levels of black and white on the TV screen, giving you a darker  
or brighter picture overall.  
Bright  
You can adjust the overall brightness of the TV picture with the Bright control.  
Detail  
The Detail feature adjusts the level of fine detail displayed in the picture.  
Energy Saver Mode  
The energy saver mode adjusts the level of back light brightness on the TV screen.  
Adjust the Picture Settings  
Picture Adjust  
1/2  
Press the MENU button  
Video Status  
0
Standard  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Tint", "Color", "Picture", "Bright", "Detail" or  
"Energy Saver Mode"  
To enter  
Tint  
Color  
0
0
0
0
0
Picture  
Bright  
Detail  
Energy Saver Mode  
Color Temperature  
®  
High  
Tint  
0
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
®  
π†  
To adjust the setting  
To move to the next setting  
Press the MENU button when finished  
Color Temperature  
You can decide how strong or dull the colors appear on the TV screen.  
Press the MENU button  
Color Temperature  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Color Temperature"  
To enter  
Low  
High  
To set "Low" or "High"  
Press the MENU button when finished  
Note:  
• If you are receiving a 1080i or 720p digital channel in it's original format, you can adjust the  
Picture Settings and Color Temperature independently from all the other channels.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Color Management  
This TV supports the Color Management function to ensure dull colors are compensated to  
produce natural hues.  
Press the MENU button  
Color Management  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Color Management"  
To enter  
On  
Off  
To set "On" or "Off"  
Press the MENU button when finished  
Dynamic Gamma  
JVC's Dynamic Gamma Circuitry (DGC) makes it easier to see dark areas when a picture has  
many dark areas, and makes it easier to see the bright areas when a picture has many bright  
areas. DGC is turned on, DGC analyzes and adjusts the total level  
Dynamic Gamma  
of picture brightness balance, especially in dark areas where the  
level of grayscale is often lost, turning completely to black DGC  
automatically enhances the detail in these dark areas providing  
a more dynamic image with ner detail, so the optimum picture  
settings are automatically set for each picture. Normally use with  
DGC on.  
On  
Off  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Dynamic Gamma"  
To enter  
To set "On" or "Off"  
Press the MENU button when finished  
Noise Reduction  
With Noise Reduction, this helps take our static or noise from a channel that may not be  
coming in clearly.  
Press the MENU button  
Noise Reduction  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Noise Reduction"  
To enter  
Off  
Low  
High  
To select the mode “Low”, “High” or “Off”  
Press the MENU button when finished  
Note:  
• Noise Reduction is only applied for SD 480i signal.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Natural Cinema  
Natural cinema corrects the problem of blurred edges which may occur when viewing a program  
originally shot on film (such as motion pictures) or animation. If you notice blurring at the edges  
of these programs, choose "Natural Cinema" and set it to "Auto". Natural Cinema helps correct  
conversion errors that occur when film, which is shot at 24 frames-per-second, is broadcast at the  
television rate of 30 frames-per-second.  
Press the MENU button  
Natural Cinema  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Natural Cinema"  
To enter  
Auto  
Off  
To select the mode "Auto" or "Off”  
Press the MENU button when finished  
Note:  
• Natural Cinema is only applied for SD 480i signal.  
Position Adjustment  
Position adjustment allows you to adjust the position of the picture.  
Press the MENU button  
π†  
®  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Position Adjustment"  
To enter  
To adjust the position  
Press the MENU button to finish  
OK  
BACK  
Operate  
Reset  
Back  
MENU Exit  
Notes:  
To reset the adjustment to the center, press the OK button.  
• When the arrow disappears, while you are adjusting the position, the position is at it’s  
maximum limit.  
• If you select Regular, Slim or Full size with aspect, position adjustment option is not seen.  
• When you change the screen size, perform the position adjustment again.  
• Position adjustment allows you to adjust the screen position vertically when the aspect is set  
Panorama Zoom or Cinema Zoom for 1080i and 720p signals.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture Adjust  
Reset  
Reset resets all picture adjustments at once to the default settings.  
Press the MENU button  
Picture Adjust  
2/2  
π†  
®  
π†  
To "Picture Adjust"  
To enter  
To "Reset"  
Video Status  
Standard  
On  
Color Management  
Dynamic Gamma  
Noise Reduction  
Natural Cinema  
Position Adjustment  
Reset  
Off  
Off  
Off  
Press the OK button  
The onscreen menu disappears for a moment,  
and then the settings are reset to the default  
setting for all the picture adjustments except for  
Position Adjustment.  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the MENU button when finished  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Sound Settings  
These settings allow you to change and adjust the sound on your television.  
Bass – You can increase or decrease the level of low-frequency sound in the TV’s audio with  
the bass adjustment.  
Treble – Use treble to adjust the level of high-frequency sound in your TV’s audio.  
Balance – Adjust the level of sound between the TV’s left and right speakers with the balance  
setting.  
Adjust the Sound Settings  
Press the MENU button  
Sound Adjust  
Bass  
0
0
0
π†  
®  
π†  
®  
π†  
To "Sound Adjust"  
To enter  
To "Bass", "Treble" or "Balance"  
To adjust the setting  
To move to the next setting  
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
Reset  
BACK  
MENU Exit  
Press the MENU button when finished  
Select  
Operate  
Back  
Notes:  
You can reset all sound adjustments you set at once as the default setting when you select  
reset. See page 49.  
Optical Out  
You can select the optical digital sound output, either PCM or DOLBY DIGITAL when your TV  
is connected to an amplifier that has DOLBY DIGITAL decoder. If you select DOLBY DIGITAL,  
you can enjoy listening in 5.1ch sound when watching digital broadcasts. This only effects  
digital channels.  
Sound Adjust  
Bass  
0
0
0
Press the MENU button  
Treble  
π†  
®  
To "Sound Adjust"  
To enter  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
π†  
To "Optical Out"  
Reset  
®  
To select "PCM" or "DOLBY DIGITAL"  
Press the MENU button when finished  
BACK  
Select  
Operate  
Back  
MENU Exit  
Notes:  
• If your amplifier does not have DOLBY DIGITAL decoder, select PCM. If you don't select  
PCM, it cannot output the sound from the speakers.  
• For connecting an amplifier using the optical output, see page 20.  
You cannot output sound from your Optical Output connection if the audio source is from your  
HDMI device.  
Manufactured under license from Dolby Laboratories. "Dolby", and  
the double-D symbol are trademarks of Dolby Laboratories.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjust  
Turn On Volume  
Turn On Volume allows you to set the volume level when you turn the TV on.  
Press the MENU button  
Sound Adjust  
π†  
®  
π†  
®  
To "Sound Adjust"  
To enter  
To "Turn On Volume"  
To set the volume level  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
Current  
0
1
2
3
48  
49  
50  
Reset  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the MENU button to finish  
Volume Limit  
Volume Limit allows you to set the maximum volume level.  
Press the MENU button  
Sound Adjust  
π†  
®  
π†  
®  
To "Sound Adjust"  
To enter  
To "Volume Limit"  
To set the maximum volume level  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
0
1
2
3
48  
49  
50  
Reset  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the MENU button to finish  
Reset  
Reset resets all Sound Adjustments at once to the default settings. See page 49 on how to use  
reset.  
Sound Adjust  
Bass  
0
0
0
Treble  
Balance  
Optical Out  
Turn On Volume  
Volume Limit  
PCM  
Current  
30  
Reset  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
Set Clock  
The set clock function is described on page 22 as the interactive plug-in menu. You can choose  
to set the clock automatically, or manually. If you need to set the clock again, follow the steps  
below.  
Press the MENU button  
π†  
®  
π†  
®  
To "Clock/Timers"  
To enter  
To "Set Clock"  
To operate  
When you set the clock automatically, choose "Auto (Digital)" or "Auto (Analog)" by  
pressing the  
or  
®
arrows.  
Clock/Timers > Set Clock  
π†  
®  
π†  
®  
To "Channel" when you selected "Auto (Digital)"  
To select a receiving digital channel  
To "Time Zone"  
Mode  
Auto (Analog)  
– –  
Channel  
Time  
10  
:
30  
AM  
Time Zone  
D.S.T.  
Atlantic  
On  
To select your time zone  
Start Clock  
Atlantic  
Eastern  
Central  
Mountain  
Pacific  
BACK  
Select  
Operate  
Back  
MENU Exit  
Hawaii  
Alaska  
π†  
®  
To "D.S.T." (daylight savings time)  
To turn D.S.T. "On" or "Off"  
To "Start Clock"  
Press the OK button  
Press the MENU button when finished  
When you set the clock manually, choose "Manual" by pressing the  
or  
®
arrows.  
π†  
®  
π†  
®  
π†  
®  
To move to the hour  
To set the hour  
To move to minutes  
To set the minutes  
To "Time Zone"  
Clock/Timers > Set Clock  
Mode  
Manual  
Channel  
Time  
– –  
30  
10  
:
AM  
Time Zone  
D.S.T.  
Atlantic  
On  
To select your time zone:  
Start Clock  
Atlantic  
Eastern  
Central  
Mountain  
Pacific  
BACK  
Select  
Operate  
Back  
MENU Exit  
Hawaii  
Alaska  
π†  
®  
To "D.S.T." (daylight savings time)  
To turn D.S.T. "On" or "Off"  
To "Start Clock"  
Press the OK button  
"Thank you !" will be displayed.  
Press the MENU button when finished  
Notes:  
"Channel" can be selected only when Mode is "Auto (Digital)".  
• D.S.T. can be used only for US and Canada when it is set to "On" in the "Set Clock" menu.  
• Only when the Mode is set to Auto, the Daylight Saving Time feature automatically adjusts  
your TV’s clock for Daylight Saving.  
• The real time and D.S.T. may not be set correctly depending on the broadcasting signal and  
receiving conditions. In this case, set your clock manually.  
You will have to reset the clock after a power interruption. You must set the clock before  
operating any timer functions.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Clock/Timers  
On/Off Timer  
The on/off timer lets you program your television to turn itself on or off. You can use it as an  
alarm to wake up, to help you remember important programs, or as a decoy when you’re not  
home.  
Clock/Timers > On / Off Timer  
Press the MENU button  
Mode  
Once  
30  
On Time  
Off Time  
Channel  
On Volume  
10  
11  
:
:
AM  
AM  
π†  
®  
π†  
®  
®  
To "Clock/Timers"  
00  
3
To enter  
Current  
To "On/Off Timer"  
Set  
BACK  
Select  
Operate  
Back  
MENU Exit  
To operate (begins with "Mode")  
Choose "Once", "Everyday" or "No"  
π†  
®  
π†  
®  
π†  
To "On Time"  
To set the hour (AM/PM) you want the TV to turn on  
To move to minutes  
To set the minutes  
To accept "On Time" and move to "Off Time" (the time the TV will turn off). Set the  
"Off Time" the same way as "On Time"  
π†  
®  
π†  
®  
π†  
To accept "Off Time" and move to "Channel"  
To select channel  
To "On Volume"  
To set the volume level  
To "Set"  
Press the OK button  
Press the MENU button to exit the menu  
Notes:  
• The on/off time cannot be set to locked or guarded channels.  
• In order for the on/off timer to work, the clock must be set.  
• After a power interruption, the timer settings must be reset.  
• If your clock is not set, "Please set clock first !" will appear on the screen. Please see  
Manual Set Clock on page 52 to set the clock.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Viewer  
Photo Viewer allows you to enjoy your digital pictures stored on your USB Mass Storage Class  
devices. You are able to view them on this TV as high quality images.  
How to start the Photo Viewer  
1) Turn the power off on the device containing your photos.  
2) Switch to "PHOTO" mode if your device has a mode switch (VIDEO/PHOTO).  
3) Turn on your device containing your photos and switch to play mode to view the photos.  
4) Connect your device to the Photo Viewer Terminal on this TV by using a USB cable.  
JVC Everio Camera (Example)  
TV Rear Panel  
INPUT  
1
INPUT  
2
75  
Ω
DIGITAL AUDIO  
OPTICAL OUT  
PHOTO VIEWER  
SERVICE  
/
(VHF/UHF)  
USB Cable  
5) The TV screen will display a "hour glass" icon and then display the Photo Viewer Screen.  
Now, you can enjoy viewing your photos. For "Multi Screen" and "Slide Show", see  
page 55 and 56.  
Photo Viewer  
Multi-Screen  
Slide Show  
Interval Time (sec)  
5
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
How to finish the Photo Viewer  
Press the MENU button when finished  
Press the POWER button on remote control to turn the power off  
Disconnect the USB cable  
Notes:  
• Use the supplied USB cable that came with your device. Do not use HUB or USB extension  
cable.  
• Photo Viewer cannot be guaranteed to work with all USB Mass Storage Devices. In this  
case, the message, "There is no photo to be displayed" will appear when you start the "How  
to start the Photo Viewer".  
• When your device that you are connecting to the TV is composed of two or more Mass  
Storage devices, only one Mass Storage device is selected. Selected Mass Storage device  
depends on the model.  
notes regarding your devices you wish to connect.  
• Compatible file format is "Exif version 2.1, based on DCF version 1.0".  
• Supported file formats are ".jpg" or ".JPG".  
• Maximum number of files that can be displayed is 9999.  
• Photos with less than 120 x 120 pixels and more than 16383 x 16383 pixels cannot be  
displayed.  
• All your stored data should be backed up first as a precaution before connecting to the TV.  
• Depending on your stored file size, it can take extra time to display "Photo Viewer" page.  
• It may take extra time to display the photo full screen, depending on the file size  
• Slide Show may take extra time more than setting the Interval Time, depending on the file  
size.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Viewer  
Multi Screen  
Multi Screen allows you to display JPEG images that are in your digital still camera or external  
USB Mass Storage Class memory as "thumbnails" .  
Multi Screen  
1/2  
Date: Jan/01/04 Dimensions: 640x430  
Photo Viewer  
π†  
®  
To "Multi Screen"  
To enter  
The thumbnail appears  
101-0001  
101-0005  
101-0002  
101-0004  
101-0008  
101-0003  
®πTo select an image  
Press OK if you want to display a single  
101-0006  
101-0007  
image  
OK  
BACK  
Select  
Operate  
Back  
MENU Exit  
Press the DISPLAY Button  
The following image appears. You can look at the pictures by using your remote  
control buttons.  
1
4
7
2
5
8
3
6
9
+
Prev.  
Next  
VOLUME  
+
Rotate  
BACK  
MENU  
Back  
Exit  
π
button: Zooms in the image  
When the image is zoomed in, you can move the image in all directions  
using the 10-key pad on your remote  
button: Zooms out the image  
button: To previous image  
button: To next image  
®
VOL+: Rotates the image 90º clockwise  
VOL-: Rotates the image 90º counterclockwise  
DISPLAY: Displays detail infomation about the image  
BACK: Returns to the thumbnail screen  
MENU: Exit  
Notes:  
• When Multi Screen has more than one screen, if you press the page number using the 10-  
key pad on your remote, you will skip to that specific page.  
• Although the image has been rotated, this change is not saved to the USB memory.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Photo Viewer  
Slide Show  
Slide Show allows you to display the images in order.  
π†  
®  
To "Slide Show"  
To enter  
The Slide Show starts  
Press the BACK button to stop the Slide Show  
Note:  
To pause the Slide Show, press the OK button. To unpause, press the OK button again.  
• When you set the Interval Time (seconds), the image will change automatically to the next  
image. By default, it is 5 seconds.  
Interval Time  
You can set the time to change to the next image for the Slide Show. When you set the time  
using the ® button, the image change to the next image automatically. When you have set  
it to "Manual", you can change the image to the next image by using the ® buttons.  
Note:  
• It may take some extra time to move to the next image depending on the size of your JPEG  
images.  
Auto Demo  
Auto Demo  
Auto Demo explains this TV's features to you. This Auto Demo mode is set to be ON by  
default until you turn it OFF.  
Notes:  
• Please complete the Interactive Plug-in Menu first. The Auto Demo mode will start  
automatically when the Interactive Plug-in Menu is completed.  
• If you press any button on the television or remote, with the exception of POWER or MENU, the  
Auto Demo mode will stop for 30 seconds. After 30 seconds have passed with no operation,  
the Auto Demo mode will start again.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Power  
Turns the TV on or off.  
Press the POWER button  
Number Buttons - 10Key Pad  
Use the number buttons on the remote control to move directly to a specific channel. For  
example, to move to channel 12:  
1 (ONE)  
2 (TWO)  
Tune  
Lets you decide the input channel and select it. After you press the number buttons on the  
remote, press the TUNE button. For example, to move to channel 12:  
1 (ONE)  
2 (TWO)  
Press the TUNE button  
Input  
Selects the signal input source for the television: VIDEO-1, 2, 3, 4 or 5 for video devices like  
VCRs, DVD players, or camcorders.  
Press the V1, V2, V3, V4 or V5 button  
Notes:  
• When you return to TV mode, press the RETURN+/TV button or direct 10 key pad or CHANNEL  
+/- button.  
You can also access by pressing the INPUT button on the side of the TV instead of the remote.  
Channel +/–  
Use these buttons to move up or down all the available channels your TV is able to receive.  
To move rapidly through the channels using JVC’s Hyperscan feature, press and hold CH+ or  
CH–.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Volume +/–  
Use these buttons to raise or lower the TV’s volume level. The maximum is the level you set in  
Volume Limit. See page 51.  
Return +/TV  
The Return+/TV button has two functions:  
Return - Returns to the channel viewed just before the channel currently onscreen.  
Return+ - Lets you program a specific channel to return to while scanning through the  
channels using the CH+ and CH– buttons.  
TV - Returns to the TV mode.  
Press the RETURN+/TV and hold for three seconds  
Return Channel (123-456)  
Programmed !  
The channel currently active has been programmed as your return+ channel. Now scan  
through the channels using the CHANNEL+/- buttons.  
Press the RETURN+/TV  
You will return to your programmed channel.  
To cancel your return+ channel, press and hold the RETURN+/TV button for three seconds.  
The message “Return Channel Cancelled !” will appear.  
• Return+ works only with the CHANNEL+/- buttons. Pressing any number key will cancel  
return+.  
Sound  
By pressing the SOUND button, you can change the A.H.S. (Advanced Hyper Surround) and  
Smart Sound on or off.  
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more  
effect.  
Smart Sound - Decreases high sound levels, giving a regulated sound level.  
Press the SOUND button  
Sound Effect  
A.H.S.  
Smart Sound  
Off  
On  
π†  
®  
To select "A.H.S." or "Smart Sound"  
To choose the setting  
Press the MENU when finished  
OK  
MENU  
Select  
Operate  
Exit  
Note:  
• Smart Sound may become an unnatural effect, depending on the signal source.  
Muting  
The MUTING button instantly turns the volume down completely when you press it. Press  
MUTING and the volume level will instantly go to zero. To restore the volume to its previous  
level, press MUTING again.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Video Status  
The Video Status button gives you a choice of four TV picture display settings, including a  
display of your own preferences.  
Standard - Resets the picture display to the factory settings.  
Video Status  
Dynamic - Gives a vivid picture with better contrast when viewing in  
Standard  
a brightly lit room.  
Dynamic  
Theater - Gives a rich, film-like look to video when viewing in a  
Theater  
Game  
dimly lit room.  
Game - Used for when you are playing video games connected to  
your TV.  
Press the V. STATUS (Video Status) button  
By every press of the V. STATUS button, you change the mode.  
Note:  
You can also change the mode by pressing the πbuttons.  
You can also access the "Front Menu" screen by using the MENU button on the side of the  
TV instead of the remote control. It has "Video Status", "Aspect", "Auto Tuner Setup" and  
"Menu". Choose "Video Status" by pressing MENU  
on the side panel and enter by using  
the CHANNEL +/- buttons (  
OPERATE  
®
).  
Sleep Timer  
The Sleep Timer can turn the TV off for you after you fall asleep. Program it to work for a total  
time of up to 180 minutes. When you press the SLEEP button once, the rest of the time will be  
displayed.  
Sleep Timer  
0 min.  
15 min.  
Press the SLEEP button twice  
By every press of the SLEEP button, you select the time for  
the timer to shut off  
30 min.  
45 min.  
60 min.  
90 min.  
120 min.  
180 min.  
60 seconds before the automatic shut off, this message will  
appear:  
Good Night !  
Push [SLEEP TIMER] button  
to extend.  
You then have 60 seconds to press the SLEEP button to delay the shut off.  
Note:  
You can also select the timer by pressing the πbuttons.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Display  
The display screen shows the current information as follows.  
Press the DISPLAY button  
Detailed mode  
Clock Mode  
Simple Mode  
Off  
Detailed Mode - Shows the channel, channel name, signal, rating information, current time,  
digital antenna level and scramble information, as well as the current time below.  
(( )) (( ))  
Dolby Digital  
TV PG  
D L S V NR  
108-1  
o
S
HD1080i CC  
WEWEWEW  
11:00PM - 11:30PM Football fun meeting  
10:15PM  
Clock Mode - Shows the current time.  
108-1  
Simple Mode - Shows the current channel and channel name or AV input.  
Off - Turns the display off.  
WEWEWEW  
Notes:  
You may also turn off the display at any step by pressing MENU.  
• If the clock is not set, "Clock Not Set" will be displayed.  
• A signal being shown in Detailed Mode, will only show the kind of input and video signal you  
are receiving. However, the actual signal type you see will be different. This TV converts all  
signals to the 480i format.  
C.C. (Closed Caption)  
Use the C.C. (Closed Caption) button to select the mode of closed caption.  
Press the C.C. button  
Closed Caption  
On  
Notes:  
Smart caption  
• Smart Caption will appear when you press the Muting button or  
when the Volume is 0, only on channels where the broadcast  
contains closed captioning.  
Off  
• When you select "On", it will be the mode selected in the Closed Caption Menu.  
• See page 36 when you set the caption/text mode.  
You can also change the mode by pressing the πbuttons.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect  
This feature will help you adjust the picture you are watching to give you the best possible  
picture quality.  
Aspect Ratios  
Panorama - With this ratio a normal  
4:3 aspect picture is stretched to fit the  
dimensions of the 16:9 aspect screen.  
Regular - The regular ratio is used when  
you want to watch a 4:3 broadcast or  
recorded program without modifying the  
original picture to fit the dimensions of your  
16:9 screen. The 4:3 picture will fill the  
screen from top to bottom, while black bars  
will appear to fill up the remaining space  
along the picture’s sides. The 4:3 picture  
will be centered within the boundaries of the  
16:9 screen.  
Cinema - This ratio “zooms in” on the  
center part of a 4:3 aspect picture, blowing  
it up to fill the 16:9 screen.  
Slim - This aspect mode shrinks the  
screen of 16:9 to 4:3. There are some  
programming that is already stretched by  
mistake at broadcasting companies, so  
this mode corrects it. Black side bars will  
appear.  
Full - This is the ratio to use when watching  
16:9 High-Definition broadcasts.  
Panorama Zoom - This ratio stretches  
the High-Definition 16:9 aspect image to  
eliminate the black side bars.  
Cinema Zoom - This ratio stretches the  
High-Definition 16:9 aspect image to  
eliminate the black surrounding bars.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Aspect Ratios (Continued)  
Press the ASPECT button  
By pressing the ASPECT button, you can change the size.  
When you change the aspect ratios, it is different from their broadcast or recorded program.  
Receiving 16:9 signal  
Receiving 4:3 signal  
Aspect  
Aspect  
Panorama  
Cinema  
Full  
Panorama Zoom  
Cinema Zoom  
Full  
Regular  
Slim  
Notes:  
You can also choose the size by pressing the πbuttons.  
• When you change the aspect ratio or signal, reset the picture position to center.  
You can also access the "Front Menu" screen by using the MENU button on the side of the  
TV instead of the remote control. It has "Video Status", "Aspect", "Auto Tuner Setup" and  
"Menu". Choose "Aspect" by pressing MENU  
CHANNEL +/- buttons ( OPERATE ).  
on the side panel and enter by using the  
®
• If the televison receives a 16:9 signal from your HDMI device, the aspect mode will turn to  
"Full" automatically. If the television receives a 4:3 signal from your HDMI device when you  
are in "Full" aspect mode, it will return to "Regular" aspect mode. If you change the aspect  
mode after the televison changed it to "Full" automatically, the televison will change to the  
aspect mode you choosed.  
Menu  
The Menu button allows you to access JVC’s onscreen menu system. Press MENU to activate  
the onscreen menu system. When a menu is displayed, press the MENU button to exit the  
menu system.  
• See individual topics like “Sound Adjust” for specific information on using menus.  
OK  
This button confirms your selection when you are in one of the onscreen menus.  
Back  
This button allows you to go back in the menu to change a selection or correct a mistake.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
ML/MTS  
ML/MTS technology allows several audio signals to be broadcast in analog at once, giving you  
a choice in what you wish to hear with a TV program. In addition to mono or stereo sound, an  
MTS broadcast may also include a second audio program (SAP). When you are receiving a  
digital broadcast, it is possible to choose a language that you wish to receive.  
When receiving ANALOG broadcast  
Press the ML/MTS button  
MTS  
By every press of the ML/MTS button, you change the mode  
Stereo  
SAP  
Mono  
Notes:  
• Keep the TV in stereo mode to get the best sound quality. The sound will work in stereo  
mode even if a certain broadcast is in mono sound only.  
• Choose the mono setting to reduce excessive noise on a certain channel or broadcast.  
• Selecting SAP will allow you to hear an alternative soundtrack, if one is available.  
• MTS unavailable if your television’s Input source is in Video-1, 2, 3, 4 or 5 mode, as  
described on page 57.  
You can also change the mode by pressing the πbuttons.  
When receiving DIGITAL broadcast  
Press the ML/MTS button  
Multi Language  
By every press of the ML/MTS button, you change the  
language  
English  
Spanish  
• ML/MTS will not work when you are using the HDMI.  
Sub Channel  
The main channel sometimes has minor channels (Sub Channels). By using the SUB CH  
button, you can select a sub channel easily.  
To watch sub channels  
For example, to move to sub channel 123-45:  
Press 1, 2 and 3 in order  
Press the SUB CH button  
Press 4 and 5 in order  
Press the TUNE button  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Button Functions  
Favorite  
The Favorite button allows you to select your favorite channels easily. First, you must register  
the channels that you like. See how to register below.  
Press the FAV. (Favorite) button  
Favorite  
The favorite channel list will appear.  
101  
CBSXXXX  
FOXXXX  
π†  
To select the channel you want to watch  
102  
Press the OK button  
103-1  
PBSXXXX  
It will change to the channel you have selected.  
123-456 WEWEWEW  
107-2  
HBOXXXX  
ABCABC  
NHKNHK  
MBSMBS  
8
1
4
Register the favorite channel  
Press the channel number you want to register  
The channel program will change.  
Remove  
Press the FAV. (Favorite) button for three seconds  
The channel will be registered in the favorite channel list.  
Notes:  
• The maximum number of channels you can register is 24.  
• If you have registered the maximum number of channels, and try to register more channels,  
the oldest channel you registered will be deleted.  
Delete the favorite channel  
Press the FAV. (Favorite) button  
Favorite  
The favorite channel list will appear.  
101  
CBSXXXX  
FOXXXX  
102  
π†  
®  
To select the channel you want to delete  
To enter  
103-1  
PBSXXXX  
Do you really remove Ch 101  
from this list ?  
123-456 WEWEWEW  
107-2  
HBOXXXX  
ABCABC  
NHKNHK  
MBSMBS  
The screen to the right will appear.  
8
1
4
®  
To "Yes"  
Press the OK button  
The channel was deleted.  
Yes  
No  
Remove  
Press the FAV. (Favorite) button when finished  
Guide  
You can view the program information from the GUIDE.  
Notes:  
• The GUIDE function will only work when you are receiving digital programming only.  
• The GUIDE will not show the correct time and date if you have not performed the set clock  
function on your television. See page 52.  
• When the program information is not being broadcasted, it will not show the correct  
information.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OSD Information  
Weak Signal  
This OSD warning appears when the digital channel that you have selected is too weak to  
receive or no signal is being detected for that channel.  
No Program or Weak Signal  
Audio / Data Only Channel  
This OSD appears when the selected channel is not broadcasting any picture or sound, or is  
only broadcasting data information.  
Audio / Data Only Channel  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Refer to the table below to check the condition. If you think that there is a problem, contact the  
JVC Service Center where you purchased the television.  
PROBLEMS  
CHECK  
There is no power  
• See if the power cord became unplugged.  
• Check for a blown fuse or circuit breaker or a power outage.  
• The antenna could be disconnected.  
There is no picture  
or sound  
• The input mode could be set improperly. See page 57.  
• The tuner (Auto Tuner Setup) could be set improperly. See page 40.  
• The TV station may be having difficulties. Check to see if other stations are working.  
• Use the HDMI cable with HDMI logo  
. See page 19.  
• If you have a device connected to INPUT-1 or INPUT-2, you will not be able to hear any  
audio from the AUDIO OUT on the back of the TV.  
You cannot output audio using the OPTICAL OUTPUT when you have digital sound from  
an HDMI device connected to the HDMI 1 or HDMI 2 connection on the back of your TV.  
(See page 18).  
• This TV can accept 480i (Composite / S / HDMI / Component), 480p, 720p and 1080i  
signals. Please check your settings.  
Remote control is not • Check to see that the batteries are still working and properly installed.  
operating properly or • Make sure the remote has a clear sight path to the TV.  
at all  
You may be too far from the TV. You must be within 23 feet (7 meters).  
You cannot select a  
certain channel  
• Make sure the channels have been programmed. See "Channel Summary", page 41.  
• Check to see if the channel is locked. See "Channel Summary - Lock" page 42.  
The power turns off  
by itself  
• Make sure the set did not become unplugged.  
• Perhaps the On/Off Timer is set. See page 53.  
• Check to see if the Sleep Timer was set. See page 59.  
It does not operate  
correctly  
• This television is operated by a microprocessor. It is possible that external noise or  
interference is causing the problem. If the television does not function correctly, remove the  
electrical plug from the wall outlet and wait a while before inserting it into the wall outlet  
again and operating the television.  
The clock is wrong  
• The power was interrupted and the clock was not reset. See page 52.  
The color quality  
is poor  
• Tint and Color may be improperly adjusted. See page 46.  
• The Video Status mode may be turned to the wrong setting. See page 59.  
There are lines  
across the picture  
• There could be interference from another electrical appliance, such as a computer,  
another TV or VCR. Move any such appliances further away from the TV.  
• There could be interference from a high-wattage appliance, like a hairdryer or vacuum,  
operating nearby. Move the antenna away from the appliance or change to a coaxial  
cable connection which is less prone to interference.  
The picture is spotted  
There are double  
pictures (ghosts)  
• A building or passing airplane can reflect the original signal and produce a second,  
slightly delayed one. Adjust your antenna position.  
Picture is snowy  
(image noise)  
Your antenna may be damaged, disconnected or turned. Check the antenna  
connection. If the antenna is damaged, replace it.  
Screen is 80% black  
• The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 36.  
• Make sure the MTS settings are correct. See page 63.  
Stereo or bilingual  
programs can't be  
heard  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
PROBLEMS  
CHECK  
Static electricity  
• It is normal to feel static electricity if you brush or touch the screen.  
You hear occasional  
crackling sounds  
• It is normal for the TV to make crackling sounds when first turned on or off. Unless  
the sound or picture become abnormal, this is fine.  
It does not operate  
correctly  
• Press the CHANNEL- and VOLUME- buttons on the side panel of the TV simultaneously  
for a few seconds. The Digital Tuner will be reset. If this does not reset it correctly, unplug  
the power cord and plug it back in.  
The following are not malfunctions.  
The television may make a creaking sound if the temperature of the room or the  
temperature of the inside of the television changes. If there is no problem with the screen or  
sound, then there is no need to worry.  
Although the picture may be temporarily disturbed and noise may be seen on the screen if  
the power is turned on immediately after it has been turned off, this is not a malfunction.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
LT-32E478  
LT-32E488  
Model  
Type  
LCD Flat Television  
Reception Format  
Reception Range  
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper  
and Ultra bands (191 channel frequency synthesizer system) at Analog  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
159W  
Power Consumption  
32 inch / 80.3 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
5 x 12cm Full Range x 2  
Antenna Terminal  
(VHF/UHF,  
ATSC/DIGITAL  
CABLE IN)  
75 ohms (VHF/UHF)(F-type connector)  
480i  
S (Input 3)  
Input 3, 4, 5  
Terminal  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
Input 3, 4 Terminal  
(Component Terminal)  
1080i / 720p / 480p / 480i  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p 75 ohms  
Video: 1080i / 720p / 480p / 480i  
Input 1, 2 Terminal  
(HDMI Input Terminal)  
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit  
Personal computer compatibility cannot be guaranteed.  
Audio Output Jacks  
(FIX)  
FIX : 500mVrms (-4dBs), Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
31 1/2 x 23 3/8 x 9 1/8  
(with stand)  
Dimensions (inch/cm)  
W X H X D  
80 x 59.3 x 23  
(with stand)  
31 1/2 x 21 1/2 x 4  
(without stand)  
80 x 54.5 x 9.9  
(without stand)  
31.5 / 14.3 (with stand)  
Weight (lbs / kg)  
29.7 / 13.5 (without stand)  
Accessories  
Refer to "unpacking your TV", page 9  
Specifications subject to change without notice.  
• The open source software is embedded in this product. For more information, please go to:  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
LT-42E478  
LT-42E488  
Model  
Type  
LCD Flat Television  
Reception Format  
NTSC, BTSC System (Multi-Channel Sound) ATSC Terrestrial, Digital Cable  
VHF 2 to 13, UHF 14 to 69 at ATSC,  
CATV 135 Sub, Mid, Super, Hyper and Ultra bands at Digital Cable  
Reception Range  
VHF 2 to 13, UHF 14 to 69 CATV 135 Sub, Mid, Super, Hyper  
and Ultra bands (191 channel frequency synthesizer system) at Analog  
Reception of channel A-5 ("95" of the TV set's on-screen cable channel  
numbers) is not recommended for your TV set.  
Power Source  
AC 120V, 60 Hz  
228W  
Power Consumption  
42 inch / 106.7 cm  
measured diagonally,  
16:9 ratio  
Screen Size  
Audio Output  
Speakers  
10W + 10W  
4 x 16cm Twin Oblique Cone x 2  
Antenna Terminal  
(VHF/UHF,  
ATSC/DIGITAL  
CABLE IN)  
75 ohms (VHF/UHF)(F-type connector)  
480i  
S (Input 3)  
Input 3, 4, 5  
Terminal  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
C: 0.286 Vp-p (burst signal), 75 ohms  
Video: 1 Vp-p, 75 ohms  
Audio: 500 mVrms (-4dBs) high impedance  
Input 3, 4 Terminal  
(Component Terminal)  
1080i / 720p / 480p / 480i  
Y: 1 Vp-p positive, 75 ohms (negative sync provided)  
PB/PR: 0.7 Vp-p 75 ohms  
Video: 1080i / 720p / 480p / 480i  
Input 1, 2 Terminal  
(HDMI Input Terminal)  
Audio: 2ch PCM, 32 / 44.1 / 48 KHz 16 / 20 / 24 bit  
Personal computer compatibility cannot be guaranteed.  
Audio Output Jacks  
(FIX)  
FIX : 500mVrms (-4dBs), Low Impedance  
Optical Output  
Digital Audio  
Digital Out (optical) x 1  
40 5/8 x 28 3/8 x 11 3/4  
(with stand)  
103 x 72 x 29.6  
(with stand)  
Dimensions (inch/cm)  
W X H X D  
40 5/8 x 26 1/2 x 4 3/8  
(without stand)  
103 x 67.2 x 10.8  
(without stand)  
55.2 / 25.1 (with stand)  
Weight (lbs / kg)  
51 / 23.2 (without stand)  
Accessories  
Refer to "unpacking your TV", page 9  
Specifications subject to change without notice.  
• The open source software is embedded in this product. For more information, please go to:  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
*LIMITED WARRANTY and "TO OUR VALUED CUSTOMER" is only available for US customers.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JVC COMPANY OF AMERICA  
Division of JVC Americas Corp.  
1700 Valley Road  
JVC CANADA, INC.  
21 Finchdene Square  
Scarborough, Ontario  
Canada, M1X 1A7  
Wayne, New Jersey, 07470  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Indesit Washer Dryer IWDC 6143 User Manual
InFocus Projector IN3118HD User Manual
Ingersoll Rand Water Pump PW10A X X User Manual
Intel Computer Hardware MX945GM2 User Manual
Jenn Air Double Oven JDR8895AAB S W User Manual
John Deere Portable Generator HR G1100 User Manual
Kambrook Fan KFA837 User Manual
Kenwood Clock Radio M1GD50 User Manual
Klipsch Speaker KSB21 User Manual
Konica Minolta Printer IP 011 User Manual