JVC DVD Player LET0213 001A User Manual

DVD VIDEO PLAYER  
Introduction  
2
XV-C3SL  
Preliminary knowledge  
Getting started  
5
13  
21  
25  
40  
45  
52  
Basic operations  
Advanced operations  
MP3 disc playback  
Initial settings  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
VOL  
VOL  
+
ENTER  
CH  
STANDBY  
PREVIOUS  
NEXT  
STROBE  
CLEAR  
SELECT  
STANDBY/ON  
SLOW  
PLAY  
SLOW  
+
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
AMP VOL  
+
XV-C3  
RM-SXV004A  
REMOTE CONTROL  
Additional information  
For Customer Use:  
INSTRUCTIONS  
Enter below the Model No. and Serial  
No. which are located on the rear, bottom  
or side of the cabinet. Retain this  
information for future reference.  
Model No.  
Serial No  
LET0213-001A  
[B]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
English  
Table of Contents  
Special picture playback......................................... 29  
Introduction  
Page 2  
To advance a still picture frame-by-frame............29  
To display continuous still pictures [STROBE].....29  
To playback in slow-motion [SLOW].....................30  
To zoom a scene [ZOOM].......................................30  
Changing the playback order ................................. 31  
Features.......................................................................2  
Supplied accessories..................................................2  
About this instruction manual..................................3  
Notes on handling......................................................4  
To playback in the desired order [PROGRAM] .....31  
To playback in random order [RANDOM]............32  
Repeat playback ...................................................... 32  
Preliminary knowledge  
Page 5  
Names of parts and controls.....................................5  
To repeat the current selection or all tracks  
[REPEAT]...............................................................32  
To repeat a desired part [A-B REPEAT].................33  
Selecting a scene angle of DVD VIDEO................. 34  
Front panel................................................................. 5  
Display window......................................................... 5  
Remote control unit .................................................. 6  
Rear panel.................................................................. 8  
Operational Principles................................................9  
To select a scene angle from the normal screen  
[ANGLE]................................................................34  
To select a scene angle from the angle list  
On-screen displays.................................................... 9  
To prevent the monitor from burning out  
display [ANGLE]...................................................35  
Changing the language and sound........................ 35  
[SCREEN SAVER]................................................. 10  
On-screen guide icons............................................ 11  
How to use numeric buttons.................................. 11  
About discs...............................................................12  
Playable disc types.................................................. 12  
Disc structure........................................................... 12  
To select the subtitle language [SUBTITLE] .........35  
To change the audio language or sound  
[AUDIO].................................................................36  
Selecting the picture character.............................. 37  
To select the picture character  
[THEATER POSITION]..........................................37  
Enjoying virtual surround sound ........................... 37  
To simulate surround sound [3D PHONIC]...........37  
Checking the status................................................. 38  
Getting started  
Page 13  
Connections..............................................................13  
Before making any connections ............................ 13  
To connect to a TV .................................................. 13  
To connect to a TV with the SCART connector .... 15  
To connect to an audio amplifier or receiver........ 16  
To connect to audio equipment  
To check the disc/time information .......................38  
To check the DVD function status..........................39  
To dim the brightness of the display window...... 39  
Dimning brightness of the display window..........39  
with a digital input............................................... 16  
To connect the power cord .................................... 17  
To install batteries in the remote control unit ......18  
MP3 disc playback  
Page 40  
About MP3 disc........................................................ 40  
Unavailable functions ............................................. 40  
To use the remote control unit for TV operation ....19  
Basic operations...................................................... 41  
Basic operations using the basic control buttons...41  
Track/Group selection using the numeric buttons ...41  
Advanced functions................................................. 42  
Program playback ...................................................42  
Random playback....................................................43  
Repeat playback ......................................................43  
Disc/time information .............................................44  
Basic operations  
Page 21  
Setting TV-DVD switch to DVD..............................21  
Turning on/off the unit............................................21  
Inserting and removing discs..................................22  
Basic playback..........................................................22  
To start playback..................................................... 22  
To stop playback completely ................................. 23  
To stop playback temporarily ................................ 23  
To advance or reverse playback rapidly  
Initial settings  
Page 45  
while monitoring.................................................. 23  
To locate the beginning of the scene or song ...... 23  
Resuming playback..................................................24  
Selecting preferences.............................................. 45  
How to set preferences...........................................45  
LANGUAGE page....................................................45  
AUDIO page.............................................................46  
DISPLAY page .........................................................48  
SYSTEM page..........................................................49  
Limiting playback by children................................ 49  
To memorize the interrupted position .................. 24  
To resume playback................................................ 24  
Advanced operations  
Page 25  
To set Parental Lock for the first time  
Playing from a specific position on a disc..............25  
To locate a desired scene from the DVD menu.... 25  
To locate a desired scene from the menu of  
[PARENTAL LOCK]...............................................49  
To change the settings [PARENTAL LOCK] .........50  
To temporarily release the Parental lock  
the Video CD/SVCD with PBC ............................. 25  
To locate a desired selection using the numeric  
buttons.................................................................. 26  
To locate a desired selection using 4 or ¢ .... 26  
To locate a desired scene by specifying the  
[PARENTAL LOCK] ..............................................51  
Additional information  
Page 52  
Care and handling of discs ..................................... 52  
Troubleshooting...................................................... 53  
Specifications........................................................... 55  
Appendix A : Table of languages and their  
chapter number [CHAP.SEARCH]....................... 27  
To locate a desired position in the current title  
or track [TIME SEARCH] ...................................... 27  
To locate a desired scene from the display  
abbreviations........................................................ 56  
Appendix B : Country/Area code list for  
parental lock ......................................................... 57  
[DIGEST] ............................................................... 28  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Features  
Supplied accessories  
• Audio/video cable (x 1)  
Picture functions  
I Strobe function  
The unit can display nine continuous still pictures  
on the TV screen.  
I Digest function  
• Remote Control Unit (x 1)  
You can select the desired selection to be played  
from the opening scenes displayed on the TV  
screen.  
O
C
P
E
S
L
O
N
/
E
T
V
1
1
T
T
V
V
S
4
T
4
T
A
N
T
V
V
T
D
7
V
D
V
7
2
B
Y
T
2
3
D
/O  
10 V  
V
N
T
D
V
R
5
D
E
5
T
T
U
V
T
V
R
8
N
8
3
T
O
VO  
P
M
V
T
V
T
E
0
N
U
C
0
6
6
L
T
V
H
9
M
9
C
U
T
I Angle function*  
You can select a desired angle from multiple  
camera angles recorded on the DVD VIDEO disc.  
H
+
I
T
N
G
O
V/V10  
C
AN  
I
E
C
N
E
L
PR  
E
T
C
O
CH  
E
EVIO  
US  
M
R
E
N
C
L
E
VOL  
U
A
R
SLO  
S
W
E
L
P
E
M
L
A
C
N
E
D
I
T
O
S
P
Y
T
D
L
A
Y
X
E
D
S
IG  
SUB TITLE  
T
E
R
O
ST  
B
P
3D  
E
H
A
N
SLO  
O
A
U
D
N
G
IC  
W
LE  
+
IO  
T
HE  
P
O
AT  
S
IT  
E
R
N
IO  
Z
A
O
O
M
P
M
R
REM  
VO  
M
OT  
-SX  
E
COV0  
L
+
04A  
TROL  
N
I Zoom function  
You can view scenes close-up.  
I Parental lock*  
• R6P(SUM-3)/AA(15F) batteries (x 2)  
You can restrict the playback of DVD VIDEO discs  
with scenes which you do not want children to  
see, such as adult or violent films.  
I Theater position  
You can select the picture character according to  
the lighting of your room.  
Audio functions  
I High quality digital sound  
You can enjoy high quality sound with Dolby  
Digital or Linear-PCM.  
I Surround function*  
The unit accommodates the Dolby Digital, DTS  
and MPEG multichannel surround systems.  
(These surround signals are output only from the  
DIGITAL OUT jacks.)  
I 3D PHONIC function  
You can enjoy surround sound with your 2-channel  
system.  
Other functions  
I Multi-language subtitles and sound*  
You can select a subtitle or sound language from  
those recorded on the DVD VIDEO disc.  
I Multi-disc playback  
You can enjoy Audio CD, Video CD and SVCD  
discs as well as DVD VIDEO discs.  
In addition, you can also enjoy MP3 discs.  
I Operation from the on-screen display  
User-friendly on-screen displays allow you to  
operate the unit easily.  
Functions with (*) mark only work on a DVD VIDEO  
disc that is compatible with each function.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
English  
About this instruction manual  
This instruction manual basically explains operations according to the format as below.  
For operations for MP3 discs, see MP3 disc playbackon and after page 40. The other sections of this  
manual do not refer to MP3 discs playback.  
To playback in random order  
[RANDOM]  
You can play titles or tracks on a disc inserted in  
random order by using the Random function.  
operation can be  
These symbols  
indicate the types  
of discs which the  
used for.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV4  
4
TV2  
2
TV5  
5
TV3  
3
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
3
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
The number  
indicates the  
SELECT  
2
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
following procedural  
step(s) in which the  
button(s) is(are)  
used.  
1
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
You may also use the  
corresponding  
buttons on the front  
panel of the unit if  
available.  
7While stopped  
1 Press PLAY MODE.  
The play mode menu appears on the TV  
screen.  
The number  
indicates the  
procedural step.  
2 Use CURSOR 2/3to move  
to  
[RANDOM].  
REPEAT  
PROGRAM  
RANDOM  
The names of buttons  
on the remote control  
unit (or on the front  
panel of the unit) are  
all given in uppercase  
letters.  
3 Press ENTER.  
The unit starts random playback.  
The RANDOMindicator appears in the  
display window on the front panel. After  
playing all titles/tracks of the discs, random  
playback ends.  
Other convenient  
procedures, etc.  
The same title or track will not be played back  
more than once during random play.  
To stop/quit random playback in the middle  
Press 7to stop playback. The unit is still in  
random playback mode, so pressing 3starts  
random playback again.  
To quit random playback, press 7again while  
stopped. The RANDOMindicator in the display  
window turns off.  
NOTE  
Some DVD VIDEO discs may not be played  
back correctly in the random mode.  
Additional  
supplemental  
remarks.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Notes on handling  
Important cautions  
Installation of the unit  
Safety precautions  
Avoid moisture, water and dust  
Select a place which is level, dry and neither too  
hot nor too cold (between 5oC and 35oC).  
Leave sufficient distance between the unit and the  
TV.  
Do not use the player in a place subject to  
vibrations.  
Do not place the unit in moist or dusty places.  
Avoid high temperatures  
Do not expose the unit to direct sunlight or place it  
nearby a heating device.  
When you are away  
Power cord  
When you are away on travel or otherwise for an  
extended period of time, remove the plug from the  
wall outlet.  
Do not handle the power cord with wet hands!  
A small amount of power* is always consumed  
while the power cord is connected to the wall  
outlet.  
Do not insert foreign objects into the unit  
Do not insert wires, hairpins, coins, etc. into the  
unit.  
When unplugging the player from the wall outlet,  
always pull the plug, not the power cord.  
* :For power consumption in standby mode, see  
Specificationson page 55.  
Do not block the vents  
Blocking the vents may damage the unit.  
To prevent malfunction of the unit  
There are no user-serviceable parts inside.  
If anything goes wrong, unplug the power cord  
and consult your dealer.  
Do not insert any metallic object into the unit.  
Do not use any non-standard shape disc available  
on the market, because it may damage the unit.  
Do not use a disc with tape, seals, or paste on it,  
because damage to the unit may result.  
Care of the cabinet  
When cleaning the unit, use a soft cloth and follow  
the relevant instructions on the use of chemically-  
coated cloths. Do not use benzene, thinner or other  
organic solvents and disinfectants. These may  
cause deformation or discoloring.  
If water gets inside the unit  
Turn off the power switch and remove the plug from  
the wall outlet, then call the store where you made  
your purchase. Using the unit in this state may  
cause a fire or electrical shock.  
Note about copyright laws  
Please check the copyright laws in your country  
before recording from DVD VIDEO, Audio CD,  
Video CD, SVCD and MP3 discs. Recording of  
copyrighted material may infringe copyright laws.  
Note about the copyguard system  
The DVD VIDEO disc is protected by the  
copyguard system. When you connect the unit to  
your VCR directly, the copyguard system activates  
and the picture may not be played back correctly.  
This product incorporates copyright protection technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights  
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation,  
and is intended for home and other limited viewing uses only unless otherwise authorized by  
Macrovision Corporation. Reverse engineering or disassembly is prohibited.  
Manufactured under license from Dolby Laboratories. Dolbyand double-D symbol are trademarks of  
Dolby Laboratories. Confidential Unpublished Works.  
© 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 and other world-  
wide patents issued and pending. DTSand DTS Digital Surroundare trademarks of Digital Theater  
Systems, Inc.  
Copyright 1996 Digital Theater Systems, Inc. All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
English  
Names of parts and controls  
Refer to the corresponding pages indicated in ( ) for details.  
Front panel  
5
1
2
6
3
4
STANDBY  
STANDBY/ON  
7
9
0
-
8
7Remote sensor  
Receives signals from the remote control unit.  
8Display window (below)  
Indicates the current status of the unit.  
97(STOP) button (23, 41)  
Stops playback.  
03(PLAY) button (22, 41)  
Starts playback. Also, used as a SELECT button for  
PBC of Video CDs/SVCDs.  
-8(PAUSE) button (23, 41)  
Pauses playback. Also, used to display nine  
continuous still pictures (STROBE function).  
1STANDBY/ON  
button (21)  
Turns the unit on or off (standby).  
2STANDBY indicator  
Lights when the power cord is connected and the  
unit is on standby. When the unit is turned on, the  
STANDBY indicator goes off.  
3Disc tray (22)  
Used to load a disc.  
4LED  
Lights up when the unit is turned on and goes out  
when the unit is turned off (standby).  
50(OPEN/CLOSE) button (22)  
Used to open and close the disc tray.  
64/¢(SKIP) buttons (23, 41)  
Used to skip a chapter, title or track. Also, used for the  
page selection of a menu screen (for Video CD/SVCD).  
Holding down 4or ¢during playback reverses  
or advances playback rapidly (except MP3).  
Display window  
1
2
3
-
VCDVD  
GROUP TITLE TRACK CHAP  
1
A B  
PROGRAM  
RANDOM  
4
5
1Disc indicator  
4PROGRAM/RANDOM indicators  
Indicates the type of the disc set in the disc tray. When  
a DVD VIDEO disc is set, DVDlights up. When a  
SVCD or Video CD disc is set, VCDlights up. When  
an Audio CD or MP3 disc is set, CDlights up.  
2Group/title/track/chapter indicators  
Displays group/title/track, or chapter number.  
3Repeat mode indicators  
The appropriate indicator illuminates while the unit  
is in the Program or Random playback mode.  
5Multi-information window  
Displays the current group/title/track/chapter  
number(s), time and status information.  
The appropriate indicator illuminates according to  
the current repeat mode.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                                      
                                                                            
                                                                      
Preliminary knowledge  
Remote control unit  
#
$
%
TV  
DVD  
1
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
^
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
2
3
TV7  
TV8  
TV9  
7
8
9
TV  
10  
TV0  
0
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
&
CH  
+
4
5
*
(
+
VOL  
VOL  
ENTER  
6
)
CH  
7
8
PREVIOUS  
NEXT  
_
CLEAR  
SELECT  
STROBE  
+
¡
9
0
+
SLOW  
PLAY  
SLOW  
THEATER  
MODE SUB TITLE AUDIO POSITION  
-
=
~
£
¢
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
!
@
§
RM-SXV004A  
REMOTE CONTROL  
1OPEN/CLOSE button (22)  
Opens and closes the disc tray.  
2Numeric buttons (11, 19)  
5CURSOR (5Up, Down) - CH (+/) buttons  
When the TV - DVD switch is set to DVD, these  
buttons are used to select an item from a menu or  
on-screen display, or to change the setting of an  
on-screen display item.  
In this case, we call them CURSOR 5/buttons in  
this manual.  
When the TV - DVD switch is set to TV, they are used  
to select a TV channel.  
6CURSOR (2Left, 3Right) - VOL (+/) buttons  
When the TV - DVD switch is set to DVD, these  
buttons are used to select an item from a menu or  
on-screen display, or to change the setting of an on-  
screen display item.  
When the TV - DVD switch is set to DVD, these  
buttons are used to specify a title, chapter, track or  
group number.  
Also used to enter a time for the Time search and a  
chapter number for the Chapter search.  
When the TV - DVD switch is set to TV, these buttons  
are used to select a TV channel as well as mute the  
TV audio.  
3RETURN button (26)  
Returns to the previous menu (for DVD VIDEO/Video  
CD/SVCD).  
In this case, we call them CURSOR 2/3buttons in  
this manual.  
When the TV - DVD switch is set to TV, they are used  
to change the TV audio volume.  
4TOP MENU button (25)  
Displays the top menu of a DVD VIDEO disc on the  
TV screen.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
            
            
                                                            
                                                            
                                                            
            
Preliminary knowledge  
English  
7CHOICE button (45)  
Displays the preference on-screen display on the TV  
screen.  
&TV/VIDEO - CANCEL button (19)  
Switches the TV input mode when the TV - DVD  
switch is set to TV.  
Cancels the last selection of the program when the  
TV - DVD switch is set to DVD.  
*MENU button (25)  
Displays a DVD menu on the TV screen.  
(ENTER button  
Executes the selected item in a menu or on-screen  
display.  
84/PREVIOUS button (23, 26, 41)  
Skips back a chapter, title, track. Also used for the  
page selection of a menu screen (for DVD VIDEO/  
Video CD/SVCD).  
Holding down this button during playback reverses  
playback rapidly (except MP3 disc).  
97/CLEAR button (23, 31, 41)  
Stops playback. Also used to clear all the  
programmed selection for the program play.  
01/SLOWbutton (23, 30, 41)  
Pressing this button during playback reverses  
playback rapidly (except MP3 disc).  
With an MP3 disc, pressing this button skips back a  
Group.  
)DISPLAY button (38, 39)  
Displays the status information (only for DVD disc)  
or the time information (for any types of discs).  
_¢/NEXT button (23, 26, 41)  
Skips forward a chapter, title, or track. Also used for  
the page selection of a menu screen (for DVD VIDEO/  
Video CD/SVCD).  
Pressing this button while a DVD VIDEO disc is  
paused reverses playback slowly.  
-PLAY MODE button (27, 31, 32, 33, 42, 43)  
Displays an on-screen display, for controlling the  
advanced playback functions.  
Holding down this button during playback advances  
playback rapidly (except MP3 disc).  
+8/STROBE button (23, 29, 30, 41)  
Pauses playback. Also, used to display nine  
continuous still pictures (STROBE function).  
Pressing this button while paused advances the still  
picture frame-by-frame.  
¡3/SELECT button (22, 25, 41, 42)  
Starts playback. Also used as a SELECT button for  
PBC of Video CD/SVCDs.  
=SUBTITLE button (35)  
Used to display the subtitle selection display on the  
TV screen, as well as used to turn the subtitle on or  
off (for DVD VIDEO/SVCD).  
~DIGEST button (28)  
Displays beginning scenes of each title, chapter or  
track on the TV screen (for DVD VIDEO/Video CD/  
SVCD).  
!3D PHONIC button (37)  
Produces a simulated surround effect.  
@ANGLE button (34, 35)  
Changes camera angles during playback of a DVD  
VIDEO disc containing multiple camera angles (for  
DVD VIDEO).  
#Infrared signal-emitting window  
Point this window toward the remote sensor on the  
front panel when pressing buttons.  
¡/SLOW+ button (23, 30, 41)  
Pressing this button during playback advances  
playback rapidly (except MP3 disc).  
With an MP3 disc, pressing this button skips forward  
a Group.  
Pressing this button while a DVD VIDEO, Video CD  
disc, or SVCD is paused advances playback slowly.  
£THEATER POSITION button (37)  
Selects a picture character from 4 positions (for DVD  
VIDEO/Video CD/SVCD).  
¢AUDIO button (36)  
Selects the audio (for DVD VIDEO/Video CD/SVCD).  
$TV STANDBY/ON  
Turns the TV on or off (standby).  
%TV - DVD switch (19, 21)  
button (19, 20)  
ZOOM button (30)  
Zooms in the picture (for DVD VIDEO/Video CD/  
SVCD).  
When setting this switch to TV,the numeric,  
cursor and TV/VIDEO - CANCEL buttons are used to  
control your TV.  
When setting it to DVD,these buttons are used to  
control the unit.  
§AMP VOL +/- button  
Amplifier volume up/down button for an external  
amplifier. Effective only for a JVCs Receiver.  
^DVD STANDBY/ON  
button (21)  
Turns the unit on or off (standby).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
Rear panel  
1
2
RIGHT  
LEFT  
AUDIO OUT  
DIGITAL OUT  
PCM STREAM  
VIDEO OUT  
COMP.  
RGB  
S-VIDEO  
AV COMPU LINK  
S-VIDEO VIDEO  
AV  
AND VIDEO  
Y
C
RGB  
2
COAIAL  
3
4
5
6
7
8
9
1AUDIO OUT jacks (LEFT/RIGHT) (13, 16)  
Outputs stereo analog audio signals.  
2AC power cord (17)  
3DIGITAL OUT PCM/STREAM jack (COAXIAL) (16)  
Outputs digital audio signals. You must select the  
signal type correctly according to the external device  
connected to via the Preference setting display.  
6VIDEO jack (13)  
Outputs a composite video signal.  
7VIDEO OUT SELECT switches (14, 15 )  
You can select the video signal type by the COMP./  
RGB-Y/C switch and the RGB/S-VIDEO AND VIDEO  
switch.  
8AV COMPU LINK jacks  
These jacks are provided for use in the future. They  
are currently not used.  
4VIDEO OUT AV-connector (15)  
The standard 21-pin SCART connector outputs video  
and audio signals. See To connect to a TV with the  
SCART connectoron page 15 for details.  
9Region Code label (12)  
Shows Region Code number.  
5S-VIDEO jack (13)  
Outputs S-video signals.  
Note that this jack does not feed correct signals when  
you make the unit feed the RGB signals. See To  
connect to a TV with the SCART connectoron page 15  
for details.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
English  
Operational Principles  
On-screen displays  
The unit provides several on-screen displays.  
With some displays, you can set or select  
preferences or functions, while the others  
are display only.  
Opening displays  
The Opening display appears automatically  
in some conditions.  
Opening display  
At the bottom, the following information are  
indicated depending on the units status.  
NOW READING: The unit is now reading  
the disc information (TOC).  
DVD/Super VCD/Video CD/CD PLAYER  
DVD/Super VCD/Video CD/CD PLAYER  
REGION CODE ERROR!: The DVD VIDEO  
disc loaded cannot be played because the  
region code of the disc does not match the  
unit.  
OPEN: The disc tray is now opening.  
CLOSE: The disc tray is now closing.  
NOW READING  
Preference displays  
LANGUAGE  
AUDIO  
When no disk is inserted or when a DVD  
VIDEO or Video CD disk is inserted and  
stopped, pressing the CHOICE button brings  
up the preference display for setting the  
preferences.  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
ENGLISH  
STREAM / PCM  
MENU LANGUAGE  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
ENGLISH  
ENGLISH  
ENGLISH  
Lo / Ro  
ON  
AUDIO LANGUAGE  
SUBTITLE  
COMPRESSION  
ON SCREEN LANGUAGE  
EXIT  
EXIT  
There are four pages: LANGUAGE, AUDIO,  
DISPLAY and SYSTEM as shown on the  
right.  
PRESS  
KEY  
PRESS  
KEY  
See page 45 for detailed information.  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
4:3 LB  
MODE 2  
ON  
OFF  
OFF  
MONITOR TYPE  
AUTO STANDBY  
RESUME  
AV COMPULINK MODE  
SCREEN SAVER  
DVD 1  
ON SCREEN GUIDE  
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
PARENTAL LOCK display  
PARENTAL LOCK  
When no disc is inserted or a DVD VIDEO  
disc is stopped, pressing the ENTER button  
while holding down the 7button brings up  
the PARENTAL LOCK display in which you  
can set the level for limiting playback.  
See page 49 for detailed information.  
PARENTAL LOCK  
GB  
——  
- - - -  
Country Code  
Set Level  
PASSWORD  
EXIT  
PRESS  
KEY  
ENTER  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
Play mode displays  
Pressing the PLAY MODE button brings up the  
play mode display in which you can control  
playback functions.  
During DVD VIDEO playback  
While stopped  
DVD CONTROL  
REPEAT  
PROGRAM  
RANDOM  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
Different displays appear depending on the  
disc type and the units status.  
During Audio CD/MP3 disc  
playback  
During Video CD/SVCD  
playback  
CD CONTROL  
VCD CONTROL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
DVD VIDEO function status  
Disc/time (DVD VIDEO)  
Status displays  
Pressing the DISPLAY button during playback  
brings up the status display.  
1 / 2  
1 / 2  
1 / 2  
Mbps  
TITLE  
1
CHAP.  
25  
TIME  
2:25:25  
BITRATE  
3.3  
ENGLISH ENGLISH  
For a DVD VIDEO disc, pressing the DISPLAY  
button toggles between the DVD VIDEO  
function status display, the disc/time display  
and off.  
For a Video CD, SVCD, Audio CD or MP3 disc,  
pressing the DISPLAY button switches the  
disc/time display on and off.  
Disc/time (Audio CD/Video  
CD/SVCD without PBC)  
Disc/time  
(Video CD/SVCD with PBC)  
TRACK 1TIME 00:08  
TRACK  
1
TIME  
25:25 PBC  
EACH  
Disc/time (MP3 disc)  
MP3 GROUP 1 TRACK 11 EACH 00:08 BITRATE 128kbps  
To prevent the monitor from burning out [SCREEN SAVER]  
A television monitor screen may be burned out if a static  
picture is displayed for a long time. To prevent this, the unit  
automatically activates the screen saver function if a static  
picture, such as an on-screen display or menu, is displayed  
for over 5 minutes.  
DVD/Super VCD/Video CD/CD PLAYER  
Pressing any button on the unit or the remote control  
unit will release the screen saver function and return to  
the previous display.  
You can select one of several screen saver modes  
available (see page 48).  
The screen saver function is not activated during Audio  
CD playback or after stopping Audio CD playback. Also, it  
is not activated during MP3 disc playback.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
English  
On-screen guide icons  
During DVD VIDEO playback, you may see icons displayed over the picture. These  
have the following meanings.  
:
Displayed at the beginning of a scene recorded from multiple angles.  
(See page 34.)  
:
Displayed at the beginning of a scene recorded with multiple audio languages.  
(See page 36.)  
:
Displayed at the beginning of a scene recorded with multiple subtitle  
languages. (See page 35.)  
You can set the unit not to display on-screen icons above via the preference  
settings described on page 48.  
About invalid operation icon  
When you press a button, if the unit does not accept its operation,  
your television screen. Operations are occasionally unacceptable even if  
not displayed.  
appears on  
is  
Note that some operations may not be accepted. For example, some discs may  
not allow rapid advance/reverse or slow-motion playback.  
How to use numeric buttons  
To select a track/title number  
To select a number between 1 and 10  
Press the corresponding button for the number.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
To select a number higher than 10  
Use the +10 button.  
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
Examples:  
To select 13  
To select 34  
To select 40  
+10 3  
+10 +10 +10 4  
+10 +10 +10 10  
To enter a time or chapter number  
The method for entering a time for Time search or chapter number for Chapter  
search is different from above. See the corresponding sections in this manual for  
the details.  
*
There is another method for selecting a track or group of an MP3 disc. See the  
appropriate section.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preliminary knowledge  
About discs  
Playable disc types  
Playable and non-playable disc types are as follows:  
Playable discs  
DVD VIDEO  
SVCD  
Video CD  
Audio CD  
The DVD VIDEO Logo is a trademark.  
CD-R and CD-RW discs recorded with SVCD, Video CD, Audio CD or MP3 format can be played back, though  
some may not be played back because of the disc characteristics or recording condition. Note that the CD-R  
and CD-RW that are not finalized cannot be played back.  
DVD VIDEO players and DVD discs have their own Region Code numbers. This unit only can play back DVD  
VIDEO discs whose Region Code numbers include 2.”  
Examples of playable DVD VIDEO discs:  
1 2  
3 4  
1 2 3  
4 5 6  
ALL  
2 5  
2
Non-playable discs  
DVD-ROM, DVD-RAM, DVD AUDIO, DVD-R, DVD-RW, DVD+RW, CD-ROM, PHOTO CD, CD-EXTRA, CD-G,  
CD-TEXT, SACD  
Playing back discs listed as Non-playable discsabove may generate noise and damage speakers.  
This unit can play back audio recorded in CD-G, CD-EXTRA and CD-TEXT discs.  
Disc structure  
A DVD VIDEO disc is comprised of titles,while an Audio CD, Video CD or SVCD is comprised of tracks.”  
Each title may be divided into some chapters.For example, if a DVD VIDEO disc contains some movies,  
each movie may have its own title number, and each movie may be divided into some chapters. In a DVD  
VIDEO karaoke disc, each song usually has its own title number and does not have chapters. In general, each  
title has independent content, while each chapter in the same title has continuity.  
For the MP3 disc structure, see page 40.  
(Example: DVD VIDEO disc)  
Title 1  
Title 2  
Chapter 1  
Chapter 2  
Chapter 3  
Chapter 1  
Chapter 2  
(Example: Audio CD/Video CD/SVCD)  
Track 1  
Track 2  
Track 3  
Track 4  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
English  
Connections  
*In the following description, TVmay be substituted with monitoror projector.”  
*Before using the unit, you have to connect the unit to a TV and/or amplifier.  
Before making any connections  
Do not connect the AC power cord until all other connections have been made.  
Since different components have different terminal names, carefully read the instructions supplied with the  
component you are going to connect.  
To connect to a TV  
You can enjoy using the unit by simply connecting it to a TV. To improve audio sound quality, connect the  
audio outputs to your separate audio equipment. (See the following pages.)  
The unit  
RIGHT  
LEFT  
AUDIO OUT  
DIGITL OUT  
PCM TREAM  
VIDEO OUT  
COMP.  
RGB  
S-VIDEO  
AV COMPU LINK  
S-VIDEO VIDEO  
AV  
AND VIDEO  
Y
C
RGB  
2
COAXL  
S-video cable  
(not supplied)  
TV  
IN  
White  
Yellow  
Red  
S-VIDEO  
VIDEO  
Yellow  
White  
LEFT  
AUDIO  
RIGHT  
Audio/Video cable  
(supplied)  
Red  
Connect the unit to a TV equipped with stereo audio input and video input jacks using the supplied audio/video  
cables.  
If your TV has a monaural audio input instead of stereo, you need to use an optional audio cable which  
converts stereo audio output to monaural.  
If your TV has an S-video input, you should connect it with the S-VIDEO output of the unit using the S-video  
cable (optional) in addition to the (standard) video connection to get better picture quality.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
Enabling the S-VIDEO output or the VIDEO output  
For your TV connection, you can use either the S-VIDEO output or the VIDEO  
output. (You cannot use both outputs at a time.)  
S-VIDEO  
AND VIDEO  
When you use the S-VIDEO jack or the VIDEO jack, set the VIDEO OUT SELECT (S-  
VIDEO AND VIDEO/RGB) switch on the rear panel to S-VIDEO AND VIDEO.Then,  
S-VIDEOappears on the display window for a few seconds. Note that these  
outputs have no relationship to the setting of the Y/C-COMP./RGB switch.  
RGB  
(Display Window)  
-
VCDVD GROUP TITLE TRACK CHAP  
1
A B  
PROGRAM  
RANDOM  
IMPORTANT!  
Note that you must change the switch position while the unit is stopped or the unit power is off (on  
standby) with the DVD removed. Otherwise, the changed setting is not effective.  
For your TV connection, you can use either the S-video output or the RGB output from the SCART connector  
at a time. When you use the S-video output for your TV, be sure that the SCART connector (VIDEO OUT-AV  
connector) is not used.  
NOTES  
Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to  
a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.  
Connect the unit to a PAL television. Do not connect the unit to an NTSC television.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
English  
To connect to a TV with the SCART connector  
You can enjoy using the unit by simply connecting it to your television set with a 21-pin SCART cable. To hear  
audio sound with better quality, connect the audio output to your audio equipment.  
TV  
The unit  
IN  
AV  
RIGHT  
LEFT  
S-VIDEO  
VIDEO  
AUDIO OUT  
DIGITAL OUT  
PCM STREAM  
IN  
VIDEO OUT  
COMP.  
RGB  
S-VIDEO  
AV COMPU LINK  
S-VIDEO VIDEO  
AV  
AND VIDEO  
LEFT  
Y
C
AUDIO  
RGB  
RIGHT  
2
COAXIAL  
SCART cable  
(not supplied)  
Set the COMP./RGB-Y/C switch correctly according to your TV.  
• If the TV only accommodates the composite video signal, set the switch to  
“COMP./RGB.” Also, at the same time, you need to set the RGB/S-VIDEO AND  
VIDEO switch to “S-VIDEO AND VIDEO.” Then, “S-VIDEO” appears on the  
display window for a few seconds (see page 13).  
COMP.  
S-VIDEO  
RGB  
AND VIDEO  
Y
C
RGB  
COMP.  
RGB  
S-VIDEO  
AND VIDEO  
• If the TV accommodates the Y/C signals, set the switch to “Y/C” so that you  
can enjoy better-quality pictures. Also, at the same time, you need to set the  
RGB/S-VIDEO AND VIDEO switch to “S-VIDEO AND VIDEO.” Then, “S-VIDEO”  
appears on the display window for a few seconds (see page 13).  
Y
Y
C
RGB  
COMP.  
RGB  
S-VIDEO  
AND VIDEO  
• If the TV accommodates the RGB signals, set the switch to “COMP./RGB.”  
Also, at the same time, you need to set the RGB/S-VIDEO AND VIDEO switch  
to “RGB.” Then, “RGB” appears on the display window for a few seconds.  
C
RGB  
If the RGB/S-VIDEO AND VIDEO switch is set to “S-VIDEO AND VIDEO,”  
unwanted phenomenon such as abnormal TV image color will occur.  
(Display Window)  
-
VCDVD GROUP TITLE TRACK CHAP  
1
A B  
PROGRAM  
RANDOM  
IMPORTANT!  
Note that you must change the switch position while the unit is stopped or the unit power is off (on  
standby) with the DVD removed. Otherwise, the changed setting is not effective.  
NOTE  
• Do not connect the unit to an NTSC television. Connect it to a PAL television.  
• When the unit is set to feed the RGB signals, the S-VIDEO jack does not feed correct signals.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
To connect to an audio amplifier or receiver  
You can enjoy high-quality audio by connecting the units audio output to your amplifier or receiver.  
The unit  
RIGHT  
LEFT  
AUDIO OUT  
DIGITAL OUT  
PCM STREAM  
VIDEO OUT  
COMP.  
RGB  
S-VIDEO  
AV COMPU LINK  
S-VIDEO VIDEO  
AV  
AND VIDEO  
Y
C
RGB  
2
COAXIAL  
Amplifier or receiver  
Red  
White  
IN  
White  
Red  
LEFT  
AUDIO  
RIGHT  
Audio cable  
(not supplied)  
Connect the units AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or  
receiver.  
To connect to audio equipment with a digital input  
You can enhance the sound quality by connecting the units DIGITAL OUT jack (COAXIAL) to the digital input  
of a receiver, MD, etc. by using an optional digital cable. The digital audio signal from a disc (except MP3 disc)  
is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in  
decoder by using an optional digital cable, you can enjoy high-quality surround sound.  
When you make the digital connection, we also recommend to make the analog connection, because,  
depending on discs, no signal may be output from the DIGITAL OUT.  
The unit  
RIGHT  
LEFT  
AUDOUT  
DIGITAL OUT  
PCM STREAM  
VIDEO OUT  
DIGITAL OUT  
COMP.  
RGB  
S-VIDEO  
AV COMPU LINK  
S-VIDEO VIDEO  
AV  
AND VIDEO  
Y
C
RGB  
2
COAXIAL  
Digital equipment  
Audio cable  
(not supplied)  
Red  
White  
IN  
IN  
White  
Red  
OPTICAL  
LEFT  
AUDIO  
RIGHT  
DIGITAL  
COAXIAL  
Coaxial digital cable  
(not supplied)  
NOTES  
When you connect the units DIGITAL OUT to digital audio equipment, before using, make the DIGITAL  
AUDIO OUTPUTsetting in the AUDIOpage of the preference display correctly according to the connected  
audio equipment. If the DIGITAL AUDIO OUTPUTis not set correctly, loud noise may be generated from  
speakers, causing damage to your speakers. See DIGITAL AUDIO OUTPUTon page 46.  
With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are  
invalid. Settings for these items must be made from the decoder.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
English  
To connect the power cord  
When all the audio/video connections have been made, plug the AC power cord into the wall outlet. The  
STANDBY indicator lights and setup is completed.  
Warning  
Disconnect the power cord if you are not going to use the unit for a long time.  
Disconnect the power cord before cleaning the unit.  
Disconnect the power cord before moving the unit.  
Do not connect or disconnect the power cord with wet hands.  
Do not pull the power cord when disconnecting it, as this may damage the cord and cause fire, electric  
shock, or other accidents.  
Warning  
Do not damage, alter, twist, or pull the power cord, as this may cause fire, electric shock, or other accidents.  
Do not put anything heavy, or the unit, on the power cord, as this may cause fire, electric shock, or other  
accidents.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
To install batteries in the remote control unit  
The battery compartment is located on the back of the remote control unit.  
1 Press down on the point shown by the arrow at the top of the compartment  
cover, and pull up the cover to open the compartment.  
2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control  
according to the polarity markings (+and “–”) inside the compartment and  
on the batteries.  
3 Place the cover over the compartment, and press down lightly.  
The batteries will last about six months with normal use. If the functions of the remote control become  
erratic, replace the batteries. See below for more information.  
Precautions for the safe use of batteries  
Observe the following precautions for the safe use of batteries. If they are used improperly their life will be  
shortened, they may burst or their contents may leak.  
Precautions  
Remove the batteries from the remote control if it is not going to be used for a long period of time.  
Remove dead batteries and dispose of them properly.  
Never leave dead batteries lying around, take them apart, mix them with other refuse, or throw them into  
an incinerator.  
Never touch liquid that has leaked out of a battery.  
Do not mix new and old batteries, or batteries of different types, when replacing them.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
English  
To use the remote control unit for TV operation  
You can operate your TV from the remote control unit.  
Setting the remote control signal for operating your TV.  
TV  
DVD  
4
1
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV4  
4
TV2  
2
TV5  
5
TV3  
3
TV6  
6
TV7  
7
TV8  
8
TV0  
0
TV9  
9
2-2  
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
2-1,3-1  
CH  
+
+
VOL  
VOL  
ENER  
3-2  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
1 Set TV-DVD switch to TV position.  
2 Holding down TV/VIDEO - CANCEL, enter the manufacturer code of your TV listed below by using the  
numeric buttons (0 to 9).  
Do not release TV/VIDEO - CANCEL. Keep holding it until the next step is completed.  
Example:  
To enter the manufacturer code 01: Press 0then 1.”  
3 Press ENTER while holding down TV/VIDEO - CANCEL.  
4 Try to operate your TV by pressing TV STANDBY/ON  
.
If your TV turns on or off, you have successfully set the control signal.  
Manufacturer code list  
No. Manufacturer  
No. Manufacturer  
No. Manufacturer  
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
JVC  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
GRADIENTE  
SANYO  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
MIVAR  
PHILIPS/CCE/MAGNAVOX  
MITSUBISHI  
PANASONIC  
RCA  
FINLUX  
PHILCO/DAEWOO  
LG (GOLDSTAR)  
GRUNDIG  
NOKIA  
FUNAI  
SAMSUNG  
SHARP  
NEC/GRADIENTE  
PHILCO  
SAMSUNG/PEONY/CHANGHONG  
SONY  
SAMSUNG  
AIWA  
TOSHIBA  
BEIJING/NOBLEX  
JVC (ONWA)  
JVC (ONWA)  
JVC (ONWA)  
THOMSON  
ZENITH  
DAEWOO  
JINXING/PEONY  
PEONY  
PHILCO/HITACHI  
PANASONIC  
SAMSUNG  
SANYO/SEARS  
TOSHIBA  
KONKA  
FERGUSON  
ITT  
TCL  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting started  
The following buttons can be used for operating the TV :  
To use the CURSOR 5//2/3(CH+, CH, VOL, VOL+), TV/VIDEO - CANCEL and numeric buttons for TV  
control, set the TV - DVD switch to TV.”  
TV  
DVD  
TV  
Turns the TV on or off.  
TV/VIDEO  
CANCEL  
Switches the TV input mode between TV and VIDEO.  
Selects the TV channels directly.  
TV1  
TV  
*
For some TVs, pressing +10functions as the 100+,while10functions as  
the ENTER button if your TV requires pressing the ENTER button after selecting  
a channel number.  
1
10  
TV0  
0
MUTING  
Mutes the TV sound.  
+
10  
CH  
+
Changes the TV channels.  
Adjusts the TV volume.  
CH  
+
VOL  
VOL  
NOTES  
The remote control unit is initially set for operating a JVC TV.  
If there is more than one code listed for the manufacturer of your TV, try them one by one until you succeed.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
In the following description, the buttons on the remote control unit are mainly used, however, you may use  
the corresponding buttons on the front panel of the unit if available.  
English  
Setting TV-DVD switch to DVD  
Set TV-DVD switch to DVD position.  
Now you can enjoy playing DVD VIDEO, Audio CD, Video CD, SVCD and MP3 discs after turning on the unit.  
TV  
DVD  
TV-DVD switch  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
Turning on/off the unit  
Press DVD STANDBY/ON  
on the remote control unit or press STANDBY/ON  
on the front panel.  
STANDBY/ON  
STANDBY  
TV  
DVD  
STANDBY/ON  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
DVD STANDBY/ON  
TV1  
1
TV4  
4
TV2  
2
TV5  
5
TV3  
3
TV6  
6
TV7  
7
TV  
10  
TV8  
8
TV0  
0
TV9  
9
MUTING  
+
10  
You can turn on the unit by pressing the  
3
button.  
In this case, the unit starts playback if the disc is set  
in the disc tray.  
If no disc is set, NO DISCappears on the display  
window.  
You can turn on the unit by pressing the 0(OPEN/  
CLOSE) button on the front panel.  
.
NOTE  
Even if you press one of the above buttons to turn off the unit, the unit is not disconnected from the AC  
power source as long as it is connected to the wall outlet. This state is called the standby mode. In this  
state, the unit consumes a very small amount of power.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                                            
Basic operations  
Inserting and removing discs  
1 Press 0(OPEN/CLOSE) to open the disc tray.  
2 Place a disc in the disc tray.  
With the label side up  
To insert an 8-cm disc,  
place it in the inner recess.  
3 Press 0(OPEN/CLOSE) to close the disc tray.  
If you press 0(OPEN/CLOSE) during playback, the unit stops playback and opens the disc tray.  
NOTES  
The unit can playback DVD VIDEO, Audio CD, Video CD, SVCD and MP3 discs only. Do not load other disc  
types. For details about playable disc types, see page 12.  
When loading a disc in the disc tray, be sure to position the disc inside the recess. Otherwise, the disc may  
be damaged when the disc tray is closed, and the disc may not be removed from the unit.  
Basic playback  
Now you can play a disc. First, lets enjoy simple playback using a DVD VIDEO, Audio CD, Video CD or SVCD  
disc according to the following procedure. For basic operations with an MP3 disc, see page 40.  
To start playback  
Press 3.  
The unit starts playback from the beginning.  
NOTES  
When the resume point is memorized, pressing 3starts playback from that  
point instead of the beginning. See page 24 and 49.  
PREVIOUS  
CLEAR  
NEXT  
During playback, the display window shows the title/chapter or track  
Basic  
control  
buttons  
SELECT  
STROBE  
number being played.  
+
SLOW  
SLOW  
PLAY  
With Video CD/SVCD discs with PBC control or some DVD discs, the menu  
display may appear on the TV screen after starting playback. In such a case,  
select an item to be played back from the menu.  
THEATER  
SUB TITLE AUDIO POSITION  
MODE  
For operation using a menu, see page 25.  
With some DVD discs, the unit starts playback automatically after inserting  
the disc.  
.
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                                           
                                                   
Basic operations  
English  
To stop playback completely  
Press  
7.  
The unit stops playback.  
To stop playback temporarily  
Press 8.  
The unit pauses playback. To resume playback, press 3.  
.
To advance or reverse playback rapidly while monitoring  
I During playback  
From the Remote control unit  
Press 1or ¡.  
Each press of 1or ¡increases the playback speed. You can select the speed among 2x, 5x, 10x, 20x  
and 60x the normal speed.  
Pressing 3returns the unit to normal playback.  
NOTE  
When you play a DVD VIDEO, Video CD, or SVCD disc, no sound comes out.  
From the Front panel  
Hold down 4or ¢.  
Holding down ¢advances playback rapidly, while holding down 4reverses playback rapidly. The  
speed will change from 5x to 20x the normal speed if you keep holding down the button for a certain  
period of time. Releasing the button returns the unit to normal playback.  
NOTES  
When you play a DVD VIDEO, Video CD, or SVCD disc, no sound comes out.  
When you play an MP3 disc, 4 and ¢ do not work.  
To locate the beginning of the scene or song  
I During playback  
Press 4or ¢.  
Press 4to locate the beginning of the current chapter, title, or track, and press ¢to locate the  
beginning of the next chapter, title, or track.  
NOTE  
When you play a Video CD/SVCD disc with the PBC function or a DVD VIDEO disc, the unit may locate a  
different place, but it will generally locate the beginning of the title, chapter or track.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Resuming playback  
The unit can memorize the position on a disc where you interrupt playback, and resume playback from that  
position next time you press 3.  
To memorize the interrupted position  
1 Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON.”  
(See page 49 for details about how to set.)  
2 At the position you want to interrupt playback, press  
7, or press DVD STANDBY/ON  
on the  
remote control or STANDBY/ON on the front panel.  
The unit memorizes the interrupted position.  
Even if you interrupt playback by pressing  
7
in step 2 above and then turn off the power, the memory is not  
cleared.  
To resume playback  
I While the disc you interrupt playback last time is still in the disc tray  
Press 3.  
The unit starts playback from the position where you interrupted playback last time.  
To clear the resume position memory  
Carry out one of the followings.  
*Take out the disc from the disc tray.  
*Press 7while stopped.  
*Turn on the unit by pressing DVD STANDBY/ON (on the remote control) or STANDBY/ON  
front panel).  
(on the  
NOTES  
The resume function does not work with Audio CD and MP3 discs.  
The resume function does not work if RESUMEon the SYSTEMpage of the preference display is set to  
OFF.”  
In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly  
earlier than the resume point you stored.  
The resume function does not work in the program or random mode.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
In this section, we describe advanced operations for  
playback of a DVD VIDEO, Audio CD, Video CD or  
SVCD disc. For operations with an MP3 disc, see  
pages 40 to 44.  
English  
2 Use CURSOR 5//2/3to select a desired  
item, then press ENTER.  
The unit starts playback of the selected item.  
Playing from a specific  
position on a disc  
You can play a disc from the selected track, title,  
chapter, or from the specified time.  
With some discs, you can also select items by  
entering the corresponding number using the  
numeric buttons, which may cause the unit to  
automatically start playback.  
NOTES  
When  
TOP MENU in step 1:  
The disc does not have a menu listing the titles.  
When appears on the TV screen by pressing  
MENU in step 1:  
appears on the TV screen by pressing  
To locate a desired scene from the DVD  
menu  
DVD VIDEO discs generally have their own menus  
which show the disc contents. These menus contain  
various items such as titles of a movie, names of  
songs, or artist information, and display them on  
the TV screen. You can locate a desired scene by  
using the menu.  
The disc does not have a menu.  
The menu button does not work while  
stopped.  
To locate a desired scene from the menu  
of the Video CD/SVCD with PBC  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
9
Some Video CD/SVCD discs supports the PBC  
function. PBC is an abbreviation of PlayBack  
Control.A Video CD/SVCD disc recorded with PBC  
has its own menus, such as a list of the songs of the  
disc. You can locate a specific scene by using the  
menu.  
TV  
10  
TV0  
0
MUTING  
+
10  
1
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
2
CH  
PREVIOUS  
NEXT  
STROBE  
CLEAR  
SLOW  
SELECT  
+
SLOW  
THEATER  
SUB TITLE AUDIO POSITION  
PLAY  
MODE  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
DIGEST ANGLE  
ZOOM  
TV  
DVD  
3D  
PHONIC  
+
AMP VOL  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
2
RM-SXV004A  
REMOTE CONTROL  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
I For TOP MENU operation:  
ENTER  
During DVD VIDEO playback or while stopped  
For MENU operation:  
CH  
PREVIOUS  
NEXT  
STROBE  
CLEAR  
SELECT  
During DVD VIDEO playback  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
1 Press TOP MENU or MENU.  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
The menu appears on the TV screen.  
RM-SXV004A  
REMOTE CONTROL  
About menu  
Normally, a DVD VIDEO disc which contains more than one  
title may have a titlemenu which lists the titles. In this  
case, the menu appears on the TV screen by pressing the  
TOP MENU button. Some DVD VIDEO discs may also have a  
different menu which appears by pressing the MENU button.  
I When a Video CD/SVCD disc with PBC is stopped  
1 Press 3.  
A disc menu appears on the TV screen (The PBC  
function is activated).  
See the instructions of each DVD VIDEO disc for its  
particular menu.  
Example:  
Example:  
PBCis indicated in the display window on  
the front panel.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
2 Use the numeric buttons to select the desired  
1
Use the numeric buttons to specify the number.  
* During DVD VIDEO playback (except when  
a menu is shown), a chapter is specified.  
* While a DVD VIDEO is stopped, a title is  
specified.  
item.  
See page 11 for details about how to use the  
numeric buttons.  
* For an Audio CD or Video CD/SVCD, a track  
is specified.  
The unit starts playback from the beginning of  
the selection.  
See page 11 for details about how to use the  
numeric buttons.  
The unit starts playback of the selected item.  
You can return to the menu by pressing the  
RETURN button.  
When NEXTor PREVIOUSappears on the  
TV screen, the unit generally works as follows:  
Pressing ¢advances to the next page.  
Pressing 4returns to the previous page.  
The method of the operation is different  
depending on the disc.  
NOTES  
During DVD VIDEO playback, if a menu is  
shown on the TV screen, the numeric buttons  
may be used for selecting an item in the menu.  
If you want to playback a PBC-compatible Video  
CD/SVCD disc without activating the PBC function,  
start playback by using the numeric buttons  
instead of the 3button.  
When  
appears on the TV screen:  
The title or track you have selected is not  
contained in the disc.  
To activate the PBC function when a PBC-compatible  
This function does not work during Video CD/  
Video CD/SVCD disc is being played back without  
SVCD playback with PBC function.  
the PBC function, press 7then press 3  
.
You can also activate the PBC function using the  
play mode menu display as follows.  
To locate a desired selection using  
4or ¢  
1 Press PLAY MODE.  
2 Use CURSOR 2/3to move  
to [PBC CALL],  
then press ENTER.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
To locate a desired selection using the  
numeric buttons  
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
You can play a desired title or chapter (DVD VIDEO)  
or track (Audio CD/Video CD/SVCD) by specifying  
+
VOL  
VOL  
ENTER  
CH  
1
PREVIOUS  
NEXT  
STROBE  
the number.  
CLEAR  
SELECT  
.
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
DIGEST ANGLE  
ZOOM  
TV1  
1
TV2  
2
TV3  
3
3D  
PHONIC  
+
AMP VOL  
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
1
7
8
TV0  
0
9
TV  
10  
MUTING  
RM-SXV004A  
REMOTE CONTROL  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
I For DVD VIDEO :  
ENTER  
CH  
At any time except menu is displayed  
PREVIOUS  
NEXT  
STROBE  
For Audio CD : At any time  
For Video CD/SVCD :  
CLEAR  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
During playback without PBC function  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
1 Press 4or ¢.  
With an Audio CD, Video CD or SVCD pressing  
the button skips a track. With a DVD VIDEO  
disc, pressing the button skips a chapter or title  
depending on the disc configuration.  
The selection number appears in the display  
window on the front panel.  
To locate a subsequent selection, press ¢  
once or repeatedly until the desired selection  
number appears in the display.  
To locate to beginning of the current  
selection, press 4once.  
RM-SXV004A  
REMOTE CONTROL  
I For DVD VIDEO :  
At any time except menu is displayed  
For Audio CD : At any time  
For Video CD/SVCD :  
During playback without PBC function or while  
stopped  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To locate a former selection, press 4  
repeatedly until the desired selection number  
appears in the display.  
English  
4 Press ENTER.  
The unit starts playback from the selected  
chapter.  
NOTES  
This function may not work with some DVD  
VIDEO discs.  
The 10and +10buttons are not used in this  
function.  
This function does not work during Video CD/  
SVCD playback with PBC function.  
NOTES  
You can also locate a desired chapter directly  
by specifying the chapter number using the  
numeric buttons during playback (except when  
a menu is shown). See page 26.  
To locate a desired scene by specifying  
the chapter number [CHAP.SEARCH]  
When the chapter number is incorrect in step 3 :  
Overwrite the incorrect number with the correct  
number.  
When  
is displayed in the TV screen in step 4 :  
If the current title of a DVD VIDEO disc being played  
is divided into chapters, you can skip to a desired  
chapter by specifying the chapter number using the  
on-screen display.  
The chapter you have selected is not contained  
in the disc, or chapter search does not work on  
the disc.  
To turn off the play mode menu:  
TV  
DVD  
STANDBY/ON  
Press PLAY MODE.  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
3
7
8
9
TV  
10  
TV0  
0
MUTING  
+
10  
To locate a desired position in the  
current title or track [TIME SEARCH]  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
2-2, 4  
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
NEXT  
STROBE  
2-1  
CLEAR  
SELECT  
+
SLOW  
SLOW  
PLAY  
You can play a disc from the desired position by  
specifying the elapsed time from the beginning of  
the current title or track using the TIME SEARCH  
function.  
Note that some DVD VIDEO discs do not contain  
time information, and the TIME SEARCH function  
cannot be used for them.  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
I During DVD VIDEO playback  
TV  
DVD  
1 Press PLAY MODE.  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
The DVD play mode menu appears on the TV  
screen.  
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
3
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
2 Use CURSOR 2/3to move to [CHAP.  
RETURN  
CH  
+
2-2, 4  
+
SEARCH], then press ENTER.  
VOL  
VOL  
ENTER  
GO TO CHAPTER = appears under the menu.  
CH  
PREVIOUS  
NEXT  
STROBE  
2-1  
CLEAR  
SELECT  
DVD CONTROL  
+
SLOW  
SLOW  
PLAY  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
GO TO CHAPTER =  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
3 Use the numeric buttons (0 to 9) to enter  
I For DVD VIDEO : During playback  
For Audio CD : During playback  
For Video CD/SVCD :  
the desired chapter number.  
Example:  
To select chapter number 8 :  
Press 8ENTER.  
To select chapter number 37 :  
Press 37ENTER.  
During playback without PBC function  
1 Press PLAY MODE.  
The play mode menu appears on the TV screen.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
When you make a mistake  
Move the cursor to the incorrect value, then press  
the correct button to re-select the value.  
2 Use CURSOR 2/3to move to [TIME  
SEARCH], then press ENTER.  
GO TOappears under the menu.  
GO TO 2 : 3 5 : _ _  
Press CURSOR 2.  
GO TO 2 : 3 _ : _ _  
Press 4.”  
3 Use the numeric buttons (0 to 9) to enter  
the time.  
You can specify the elapsed time of the current  
title or track to set the location which you want  
to playback from.  
GO TO 2 : 3 4 : _ _  
4 Press ENTER.  
The unit starts playback from the specified  
time.  
NOTES  
When  
appears on the TV screen in step 2 :  
(for DVD VIDEO)  
(for Audio CD)  
The time you have selected is not contained on  
the disc, or the time search function does not  
work on the disc.  
CD CONTROL  
DVD CONTROL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
GO TO 0 2 : 3 4  
GO TO 2 : 3 4 : 0 0  
Also note that the time search function does  
not work during Video CD/SVCD playback with  
the PBC function.  
To turn off the play mode menu :  
Selected time  
Selected time  
Press PLAY MODE.  
The TIME SEARCH function cannot be used  
during program playback.  
• “10and +10buttons are not used in this  
function.  
You can specify the time in hour/minute/second  
format for DVD VIDEO discs, and in minute/second  
format for Audio CD, Video CD and SVCD discs.  
To locate a desired scene from the  
display [DIGEST]  
(for Video CD/SVCD)  
VCD CONTROL  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
The unit can display the opening scene of each title  
or chapter on a DVD VIDEO or each track of a Video  
CD/SVCD. You can select a desired scene from  
those displayed on the TV screen.  
GO TO 0 2 : 3 4  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
Selected time  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
Example (for DVD VIDEO)  
To playback from 2(H):34(M):00(S)  
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
3
CH  
+
+
VOL  
VOL  
GO TO _ : _ _ : _ _  
Press 2.”  
ENTER  
2
CH  
PREVIOUS  
NEXT  
CLEAR  
SELECT  
STROBE  
+
GO TO 2 : _ _ : _ _  
Press 3.”  
SLOW  
PLAY  
SLOW  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
1
3D  
PHONIC  
+
AMP VOL  
GO TO 2 : 3 _ : _ _  
Press 4.”  
RM-SXV004A  
REMOTE CONTROL  
GO TO 2 : 3 4 : _ _  
I For DVD VIDEO :  
While stopped or during playback.  
For Video CD/SVCD :  
Press ENTER.  
While stopped or during playback without  
PBC function.  
You do not have to press 0to enter the trailing  
zeros (for the last two digits in the example above).  
Of course, it is possible to enter them.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
English  
1 Press DIGEST.  
Special picture playback  
The unit provides special picture playback functions  
including Frame-by-frame, Strobe, Slow-motion and  
Zoom.  
Up to nine opening scenes are displayed.  
While a DVD VIDEO disc is stopped :  
The opening scene of each title appears on  
the TV screen.  
During DVD VIDEO disc playback :  
The opening scene of each chapter in the  
current title appears on the TV screen.  
When a Video CD/SVCD disc is loaded :  
The opening scene of each track appears on  
the TV screen.  
To advance a still picture  
frame-by-frame  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
1
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
I While paused (still)  
2 Use CURSOR 5//2/3to select the  
1 Press 8.  
desired scene.  
Each time you press 8, the still picture  
advances to the next frame.  
The selected scene is indicated by  
.
Pressing 3returns to normal playback.  
If there are more than 9 scenes, the digest screen  
will have more than one page. In this case,  
pressing ¢advances to the next page, while  
pressing 4 returns to the previous page.  
To display continuous still pictures  
[STROBE]  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
Selected scene  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
1, 2  
+
SLOW  
SLOW  
PLAY  
When the lower right scene is selected, pressing  
CURSOR 3advances to the next page if available.  
Similarly, when the upper left scene is selected,  
pressing CURSOR 2returns to the previous page  
(if available).  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
When there are more than one digest page, after  
pressing DIGEST, pressing ¢before all 9 scenes  
of the first page appear on the TV screen will  
advance to the next page. Similarly, pressing 4  
before all the scenes of the second or latter page  
appears on the TV screen will return to the  
previous page.  
I During playback  
1 At the point you want to view as continuous  
photographs, press 8.  
The unit pauses playback.  
2 Press and hold 8for more than 1 second.  
3 Press ENTER.  
Nine continuous still pictures appear on the TV screen.  
The unit starts playback from the selected  
scene.  
NOTE  
With some discs, depending on the contents, it  
may take some time until all the scenes appear  
on the screen.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To zoom a scene [ZOOM]  
Pressing 8when the nine still pictures are shown  
will advance to the next nine still pictures.  
Pressing 3when the nine still pictures are shown  
will advance pictures in normal playback speed.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
To cancel strobe play  
Press and hold 8for more than 1 second.  
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
NOTE  
2
1
CH  
If you press and hold 8for more than 1 second  
during playback, nine still pictures also appear  
but they advance in normal playback speed.  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
To playback in slow-motion  
[SLOW]  
I During playback or while paused  
1 Press ZOOM.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
ZOOMappears on the TV screen.  
The unit zooms in to the center part of the  
scene to produce a double-sized image.  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
1
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
ZOOM  
I During playback  
1 Press 8, then use 1/ ¡.  
To play forward slow-motion, press ¡, and to  
play reverse slow-motion (for DVD VIDEO discs  
only), press 1. First, the unit plays the  
slowest speed, and each time you press the  
button, the playback speed increases.  
2 Use CURSOR 5//2/3to move the  
zoomed-in scene.  
To return to normal playback  
Press 3.  
ZOOM  
To pause slow-motion playback  
Press 8.  
NOTES  
The sound is muted during slow-motion  
playback.  
To return to normal playback  
Press ZOOM again.  
Reverse slow-motion playback is not possible  
for a Video CD/SVCD.  
NOTE  
While zoomed, the picture may look coarse.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
English  
1
3
7
2
2
8
3
1
9
4
2
10  
5
6
11  
17  
12  
18  
Changing the playback  
order  
You can play titles or tracks on a disc inserted in the  
desired order or in random order.  
13  
14  
15  
16  
The programmed title/track  
number is shown under each  
program number.  
If you specify a wrong selection  
Press TV/VIDEO-CANCEL. The last selection  
programmed is erased.  
To playback in the desired order  
[PROGRAM]  
To clear the program  
Press 7.  
You can play titles or tracks on a disc inserted in the  
desired order by using the Program function.  
4 Press 3to start program play.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
When all of the programmed titles/tracks have  
finished playback, the unit stops but the  
program remains.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
3
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
2-2  
NOTES  
+
VOL  
VOL  
ENTER  
Some DVD VIDEO discs may not be played  
back correctly in program mode.  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2-1  
4
SELECT  
During program playback, pressing ¢skip to  
the next selection of the program. Pressing 4  
returns to the beginning of the current  
selection, however, you cannot skip back to  
the previous selection.  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
+
3D  
PHONIC  
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
By pressing PLAY MODE during program  
playback, the program table is displayed on the  
TV screen and the current program number is  
indicated in yellow.  
I While stopped  
1 Press PLAY MODE.  
To quit program playback  
Press 7while stopped.  
The play mode menu appears on the TV  
screen.  
The PROGRAMindicator in the display window  
turns off.  
Note that the program remains.  
To clear the program, press 7while the program  
table is shown on the TV screen.  
2 Use CURSOR 2/3to move to  
[PROGRAM] and press ENTER.  
REPEAT  
PROGRAM  
RANDOM  
While stopped and the play mode menu is  
1
7
2
8
3
9
4
5
6
10  
16  
11  
17  
12  
18  
displayed on the TV screen, by moving  
to  
13  
14  
15  
[PROGRAM] and pressing ENTER, the program  
mode quits. Note that the program remains.  
The program table appears under the menu  
bar (as shown above).  
The PROGRAMindicator appears in the  
display window on the front panel.  
3 Specify the titles or tracks in the desired  
order using the numeric buttons.  
See page 11 for details about how to use the  
numeric buttons.  
Up to 18 titles or tracks can be programmed.  
You may select the same title or track more  
than once.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To playback in random order  
[RANDOM]  
Repeat playback  
You can repeat playback of the current selection or all  
disc contents (except DVD VIDEO). You can also  
repeat playback of a desired part.  
You can play titles or tracks on a disc inserted in  
random order by using the random function.  
TV  
DVD  
To repeat the current selection or all  
tracks [REPEAT]  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
TV  
DVD  
CH  
+
STANDBY/ON  
OPEN/  
CLOSE  
3
1
TV  
DVD  
+
VOL  
VOL  
ENTER  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
TV7  
TV8  
TV9  
2
7
TV  
10  
8
TV0  
0
9
MUTING  
SELECT  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
+
SLOW  
SLOW  
PLAY  
CH  
+
THEATER  
2-2  
MODE SUB TITLE AUDIO POSITION  
+
VOL  
VOL  
ENTER  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
CH  
+
AMP VOL  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2-1  
SELECT  
RM-SXV004A  
REMOTE CONTROL  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
I While stopped  
3D  
PHONIC  
+
AMP VOL  
1 Press PLAY MODE.  
RM-SXV004A  
REMOTE CONTROL  
The play mode menu appears on the TV  
screen.  
I For DVD VIDEO : During playback  
For Audio CD/Video CD/SVCD :  
2 Use CURSOR 2/3to move to  
In any condition except Video CD/SVCD  
playback with PBC  
[RANDOM].  
1 Press PLAY MODE.  
REPEAT  
PROGRAM  
RANDOM  
The play mode menu appears on the TV  
screen.  
2
Use CURSOR 2/3to move to [REPEAT],  
then press ENTER.  
Each time you press ENTER, the repeat mode  
changes as follows depending on the disc type  
and units status :  
3 Press ENTER.  
The unit starts random playback.  
The RANDOMindicator appears in the  
display window on the front panel. After  
playing all titles/tracks of the disc, random  
playback ends.  
During DVD VIDEO playback  
DVD CONTROL  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
REPEAT TITLE  
The same title or track will not be played back  
more than once during random play.  
To stop/quit random playback in the middle  
Press 7to stop playback. The unit is still in  
random playback mode, so pressing 3starts  
random playback again.  
To quit random playback, press 7again while  
stopped. The RANDOMindicator in the display  
window turns off.  
Selected repeat mode  
REPEAT TITLE  
(current title repeat)  
REPEAT CHAPTER  
(current chapter repeat)  
NOTE  
Some DVD VIDEO discs may not be played  
back correctly in the random mode.  
No indication (off)  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
Audio CD/Video CD/SVCD  
English  
To repeat a desired part  
[A-B REPEAT]  
(for Video CD/SVCD)  
(for Audio CD)  
VCD CONTROL  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT ALL  
REPEAT ALL  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
Selected repeat mode  
RETURN  
Selected repeat mode  
CH  
+
2-2, 3  
2-1  
+
VOL  
VOL  
ENTER  
CH  
REPEAT ALL (all track repeat)  
PREVIOUS  
CLEAR  
NEXT  
SELECT  
STROBE  
REPEAT 1 (current track repeat)  
+
SLOW  
PLAY  
SLOW  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
No indication  
(off)  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
If you press 7in REPEAT ALL or REPEAT1 mode,  
the unit stops playback but remains in the mode.  
I During playback  
If you press 7in REPEAT TITLE or REPEAT  
CHAPTER mode, the unit stops playback and quits  
the mode.  
1 Press PLAY MODE.  
The play mode menu appears on the TV  
screen.  
To quit repeat playback  
2 Use CURSOR 2/3to move to [A-B  
With  
pointed at [REPEAT], press ENTER  
REPEAT], then press ENTER at the  
beginning of the part you want to repeat  
(point A).  
repeatedly until the mode is set to off.  
NOTES  
Some DVD VIDEO discs do not allow the title  
repeat or/and chapter repeat.  
Make sure that the REPEAT mode is off. If any  
REPEAT mode is selected, you cannot move  
to [A-B REPEAT].  
Some DVD VIDEO discs automatically stop  
playback in the middle of the disc.  
3 Press ENTER at the end of the part you  
Repeat playback function cannot be used  
during Video CD/SVCD playback with PBC  
function.  
want to repeat (point B).  
The unit locates Aand starts repeat playback  
between Aand B.”  
To turn off the play mode menu display.  
Press PLAY MODE.  
(for DVD VIDEO)  
(for Audio CD)  
DVD CONTROL  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH CHAP. SEARCH  
REPEAT A-B REPEAT TIME SEARCH  
A 0:00:16  
B 0:01:16  
A 0:00:16  
B 0:01:31  
Point A Point B  
Point A Point B  
(for Video CD/SVCD)  
VCD CONTROL  
REPEAT A-B REPEAT TIME SEARCH PBC CALL  
A 0:00:16  
B 0:01:31  
Point A Point B  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
To quit A-B repeat playback  
Press 7. The unit stops playback and quits A-B  
repeat mode.  
Selecting a scene angle of  
DVD VIDEO  
You can enjoy a variety of scene angles if the DVD  
VIDEO disc contains multi-angleparts, where  
multiple cameras were used to shoot the same scene  
from different angles.  
During playback, pressing ENTER when  
pointed at [A-B REPEAT] quits A-B repeat mode  
and continues playback.  
is  
You can also quit A-B repeat mode by pressing 4  
or ¢.  
At the beginning of a multi-anglepart,  
appears on the TV screen.  
NOTES  
To turn off the play mode menu.  
Press PLAY MODE.  
To select a scene angle from the normal  
screen [ANGLE]  
If  
appears when pressing ENTER in step 2  
during DVD/SVCD playback.  
You cannot repeat the selected portion because  
of the disc contents.  
TV  
DVD  
The A-B REPEAT function cannot be used  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
during program playback.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
1, 2  
RM-SXV004A  
REMOTE CONTROL  
I During DVD VIDEO playback  
1 Press ANGLE.  
The Angle selection display appears on the TV  
screen.  
1 / 3  
2 Use ANGLE or CURSOR 2/3to select the  
desired angle.  
Each time you press ANGLE or CURSOR 2/3,  
the angle changes.  
Example:  
1 / 3  
2 / 3  
3 / 3  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
English  
NOTES  
Changing the language  
and sound  
For DVD VIDEO discs, you can select the subtitle  
language, as well as the audio language/sound  
included on a disc.  
For Video CD/SVCD discs, you can select the audio  
channel(s).  
The Angle selection display will automatically  
disappear if you do not change the angle for 10  
seconds.  
To turn off the Angle selection display  
manually, press ENTER.  
When  
appears on the TV screen  
The current scene is not recorded from multiple  
angles.  
To select the subtitle language  
[SUBTITLE]  
To select a scene angle from the angle  
list display [ANGLE]  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV1  
1
TV2  
2
TV3  
3
TV7  
TV8  
TV9  
TV4  
4
TV5  
5
TV6  
6
7
TV  
10  
8
TV0  
0
9
MUTING  
TV7  
TV8  
TV9  
+
10  
7
TV  
10  
8
TV0  
0
9
TV/VIDEO  
CANCEL  
RETURN  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
3
1
+
VOL  
VOL  
CH  
+
ENTER  
+
VOL  
VOL  
ENER  
CH  
2
PREVIOUS  
CLEAR  
NEXT  
STROBE  
3
CH  
SELECT  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
1, 2  
3D  
PHONIC  
DIGEST ANGLE  
ZOOM  
+
AMP VOL  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
RM-SXV004A  
REMOTE CONTROL  
I During playback  
I During DVD VIDEO playback  
1 Press SUBTITLE.  
1 Press and hold ANGLE for more than 1  
The Subtitle selection display appears on the  
TV screen.  
second.  
(for DVD VIDEO)  
(for SVCD)  
Up to nine camera angles recorded on a disc  
appear on the TV screen.  
ON  
1 / 3  
ENGLISH  
ON  
1 / 4  
2 To turn the subtitle on and off, press  
SUBTITLE.  
The selected camera angle  
3 To select the desired subtitle language, use  
CURSOR 2/3.  
2 Use CURSOR 5//2/3to select the  
desired angle.  
For DVD VIDEO  
Each time you press  
CURSOR 2/3, the  
subtitle language  
changes.  
Example:  
3 Press ENTER.  
1/3 ENGLISH  
The unit starts playback by the selected angle  
on the full-sized screen.  
2/3 FRENCH  
3/3 SPANISH  
-/3 (off)  
NOTES  
When  
appears on the TV screen in step 1:  
The current scene is not recorded from multiple  
angles.  
During the operation above, audio is muted.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
For SVCD  
(for DVD VIDEO)  
(for Video CD)  
Example:  
OFF -/4  
Pressing CURSOR 2/3cycles  
among the four subtitle channels  
on the right hand regardless of  
whether the subtitle is recorded  
or not.  
You can also select the subtitle  
by pressing SUBTITLE.  
1 / 3  
ENGLISH  
STEREO  
1/4  
2/4  
3/4  
4/4  
(for SVCD)  
STEREO-1  
NOTES  
For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See Appendix A :  
Table of languages and their abbreviationsat the  
end of this manual.  
2 Use AUDIO or CURSOR 2/3to select the  
The Subtitle selection display will  
automatically disappear if you do not change  
the subtitle for 10 seconds.  
desired audio.  
For DVD VIDEO  
Each time you press AUDIO Example:  
To turn off the Subtitle selection display  
manually, press ENTER.  
or CURSOR 2/3, the audio  
language or sound  
changes.  
1/3 ENGLISH  
2/3 FRENCH  
3/3 SPANISH  
When  
appears on the TV screen:  
You cannot select the subtitle.  
To change the audio language or sound  
[AUDIO]  
For Video CD/SVCD  
Each time you press AUDIO or CURSOR 2/3, the  
playback audio changes as follows.  
By AUDIO selection, you can choose the audio  
language of movies or choose to enjoy karaoke with  
or without the vocal.  
(Video CD)  
STEREO  
(SVCD)  
STEREO-1  
TV  
DVD  
STEREO-2  
L-1  
STANDBY/ON  
OPEN/  
CLOSE  
L
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
R
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
R-1  
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
L-2  
+
VOL  
VOL  
ENTER  
CH  
R-2  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
NOTES  
DIGEST ANGLE  
ZOOM  
1, 2  
For DVD VIDEO, the selected language may be  
abbreviated on the TV screen. See Appendix A :  
Table of languages and their abbreviationsat the  
end of this manual.  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
The Audio selection display will automatically  
disappear if you do not change the audio for 10  
seconds.  
I During playback  
1 Press AUDIO.  
To turn off the Audio selection display  
manually, press ENTER.  
The Audio selection display appears on the TV  
screen.  
When  
VIDEO disc):  
You cannot select the audio.  
appears on the TV screen (for a DVD  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
English  
Selecting the picture  
character  
Enjoying virtual surround  
sound  
Using the 3D PHONIC function, you can get a  
simulated surround effect from your stereo system.  
You can select the picture character from among four  
options according to the source program, lighting  
condition of the room and/or personal preference.  
To select the picture character  
[THEATER POSITION]  
To simulate surround sound  
[3D PHONIC]  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV1  
1
TV2  
2
TV3  
3
TV  
DVD  
TV4  
4
TV5  
5
TV6  
6
TV1  
1
TV2  
2
TV3  
3
TV7  
TV8  
TV9  
TV4  
4
TV5  
5
TV6  
6
7
TV  
10  
8
TV0  
0
9
MUTING  
TV7  
TV8  
TV9  
+
10  
7
TV  
10  
8
TV0  
0
9
TV/VIDEO  
CANCEL  
RETURN  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
CH  
+
RETURN  
+
VOL  
VOL  
CH  
+
ENTER  
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
CH  
SELECT  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
+
SLOW  
SLOW  
PLAY  
MODE SUB TITLE AUDIO POSITION  
1, 2  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
1, 2  
RM-SXV004A  
REMOTE CONTROL  
RM-SXV004A  
REMOTE CONTROL  
I During playback  
I During playback  
1 Press THEATER POSITION.  
The theater position display appears on the TV screen.  
1 Press 3D PHONIC.  
2 Select the desired theater position by using  
The 3D PHONIC display appears on the TV  
screen.  
THEATER POSITION.  
Each time you press the THEATER POSITION, the  
picture character changes as follows :  
2 Select the desired mode by using 3D  
PHONIC.  
THEATER 1  
Each time you press the 3D PHONIC, the 3D  
PHONIC mode changes as follows :  
3D PHONIC DRAMA  
Selected picture character  
THEATER 1  
Selected effect mode  
THEATER OFFis  
THEATER 2  
the normal position.  
3D PHONIC ACTION*  
3D PHONIC DRAMA  
3D PHONIC THEATER  
3D PHONIC OFF  
Selecting a higher  
number tones down  
the picture character.  
THEATER 3  
THEATER OFF  
NOTES  
The theater position display will automatically  
disappear if you do not change the theater  
position for 5 seconds.  
To turn off the theater position display  
manually, press ENTER.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
ACTION  
Suitable for action movies and sports programs  
in which sounds dynamically move.  
Checking the status  
You can view the disc/time information, as well as  
the DVD functions status on the TV screen.  
DRAMA  
Natural and warm sound. You can enjoy movies  
in a relaxed mood.  
To check the disc/time information  
THEATER  
You can enjoy sound effects like in a major  
theater in Hollywood.  
TV  
DVD  
When you play a DVD VIDEO disc recorded in  
Dolby Digital which contains more than 3  
channels, ACTION does not appear.  
STANDBY/ON  
TV DVD  
OPEN/  
CLOSE  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
NOTES  
+
VOL  
VOL  
ENTER  
The 3D PHONIC display will automatically  
disappear if you do not change the 3D PHONIC  
for 5 seconds.  
CH  
1
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
To turn off the 3D PHONIC display manually,  
THEATER  
MODE SUB TITLE AUDIO POSITION  
press ENTER.  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
With a Video CD disc, if the Audio setting is set  
to L or R, you cannot activate the 3D PHONIC  
function (i.e. the 3D PHONIC mode is fixed to  
OFF).  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
I During playback  
Conversely, when the 3D PHONIC function is  
active, changing the AUDIO setting to L or R  
from STEREO cancels the 3D PHONIC function.  
1
Press DISPLAY once for a Audio CD, Video CD  
or SVCD disc, or twice for a DVD VIDEO disc.  
The disc/time display appears on the TV screen.  
The 3D PHONIC function works correctly when  
playing back discs recorded in the Dolby  
Surround or Dolby Digital 5.1-CH format.  
It also works when playing back discs other  
than those above, but does not provide the  
correct effect.  
(for DVD VIDEO)  
Mbps  
TITLE  
1
CHAP.  
25  
TIME  
2:25:25  
BITRATE  
3.3  
The 3D PHONIC function does not affect the  
DTS or Dolby Digital bitstream signal from the  
DIGITAL OUT jack.  
Transmission rate  
Elapsed time  
Current chapter number  
The sound effect will not be set or operate,  
even if 3D PHONIC is pressed, for the sound of  
DVD VIDEO discs recorded in Linear PCM.  
Current title number  
(for Audio CD, Video CD or SVCD playing  
without PBC)  
When you set the 3D PHONIC function to on,  
the DOWN MIX and COMPRESSION settings in  
the AUDIO page of the preference display are  
disabled.  
TRACK 1TIME 00:08  
EACH  
Time mode  
Current track elapsed time  
Current track number  
(for Video CD/SVCD playing with PBC)  
TRACK 1TIME 00:08 PBC  
PBC on status  
Current track elapsed time  
Current track number  
To turn off the disc/time display.  
Press DISPLAY.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Advanced operations  
English  
To check the DVD function status  
To dim the brightness of  
the display window  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
You can dim the brightness of the display window.  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
Dimming brightness of the display  
window  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
CH  
1
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
TV  
DVD  
+
SLOW  
SLOW  
PLAY  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
THEATER  
MODE SUB TITLE AUDIO POSITION  
TV1  
1
TV2  
2
TV3  
3
DIGEST ANGLE  
ZOOM  
TV4  
4
TV5  
5
TV6  
6
3D  
PHONIC  
+
AMP VOL  
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
RM-SXV004A  
REMOTE CONTROL  
1
CH  
+
+
VOL  
VOL  
ENTER  
CH  
I During DVD VIDEO playback  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
1 Press DISPLAY.  
THEATER  
MODE SUB TITLE AUDIO POSITION  
The DVD function status display appears on  
the TV screen.  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
1
RM-SXV004A  
REMOTE CONTROL  
1 / 2  
1 / 2  
1 / 2  
ENGLISH ENGLISH  
I When no disc is inserted or while stopped  
1 Press CURSOR while holding down  
ANGLE.  
The current selections of the camera angle,  
audio language and subtitle language are  
shown.  
You can set the brightness from among three  
levels. Each press of the button makes the  
display window darker.  
To restore the display window brighter, press  
CURSOR 5.  
To turn off the DVD function status display.  
Press DISPLAY twice.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
This unit can playback CD discs recorded by the MP3  
format (we refer to those discs as MP3 discs in this  
manual).  
Unavailable functions  
Operations for MP3 discs are similar to those for  
Audio CD discs, though there are some restrictions  
and differences.  
As described earlier, there are some restriction for  
playback of MP3 discs. Following functions are not  
available with MP3 discs.  
What is MP3?  
Unavailable functions for MP3 discs  
MP3 is the abbreviation of MPEG1 Audio Layer  
3.MPEG Audio is a compression specification  
that compresses the audio portion only. This  
image compression method is used in DVD or  
Video CD, etc. The audio data has been  
compressed into about 1/10.  
Function  
Function  
name  
Resume  
To resume playback  
Time search  
To locate a desired position in the  
current track  
About MP3 disc  
On an MP3 disc, each material (song) is recorded on  
each Track (file), which usually belongs to a Group  
(folder).  
Manual search  
To advance or reverse playback  
rapidly  
A-B repeat  
3D PHONIC  
To repeat a desired part  
To simulate surround sound  
Group 1  
Group 2  
NOTES  
Track 1  
Track 2  
Track 3  
Track 1  
Track 2  
You cannot playback Tracks in the desired  
(programmed) or random order, nor playback a  
Track repeatedly.  
The screen saver function is not active with an  
MP3 disc, as with an Audio CD.  
This unit can recognize up to 99 Groups and up to  
254 Tracks per Group, however, the number of  
Tracks to be played back on a disc is limited to 1023.  
If a disc includes more than 1023 Tracks, the unit stops  
detecting Tracks when the number of detected Tracks  
reaches 1023 and ignores the subsequent Tracks. The  
unit also ignores any non-MP3 file in the disc.  
NOTES for making a private MP3 disc  
using a CD-R/CD-RW disc:  
Select ISO 9660as the disc format.  
Do not select the multi-sessionrecording.  
Finalize the disc.  
NOTES  
Because of the disc characteristics or recording  
condition, some discs may not be played back  
or it takes time to start playback.  
The unit does not support packet writingdiscs.  
If there are any Tracks (files) which are stored  
on a disc directly and do not belong to any  
Group (directory), the unit recognized them as  
belonging to an independent Group.  
The unit does not output a digital audio signal  
from DIGITAL OUT when playing back an MP3  
disc.  
The unit plays back Groups/Tracks on an MP3  
disc in the alphabetical order.  
For example, if there are three title Groups  
[one], [two] and [three] on a disc, the playback  
order is [one], [three] then [two]. Tracks in a  
Group are played back in the same way.  
Therefore, an MP3 disc on the market may be  
played back in the different order from the  
order printed on its sleeve.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
       
       
           
       
           
       
MP3 disc playback  
English  
Track/Group selection using the  
numeric buttons  
Basic operations  
Basic operations using the basic  
control buttons  
While stopped, you can select a Group to be played  
using the numeric buttons.  
During playback, you can select a Track in the  
current Group to be played using the numeric  
buttons.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
How to select a Track or Group:  
TV4  
4
TV5  
5
TV6  
6
The same method for selecting a track of an Audio  
CD disc can be applied for selecting a Group or  
Track of an MP3 disc except for a three-figure Track.  
For selecting a three-figure Track (i.e. Track 100 or  
higher), follow the procedure below.  
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
CH  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
PREVIOUS  
CLEAR  
NEXT  
STROBE  
Basic  
control  
buttons  
TV4  
4
TV5  
5
TV6  
6
SELECT  
2
1
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
MUTING  
+
+
10  
SLOW  
PLAY  
SLOW  
TV/VIDEO  
CANCEL  
RETURN  
THEATER  
AUDIO POSITION  
CH  
+
MODE  
SUB TITLE  
+
VOL  
VOL  
ENTER  
DIGEST ANGLE  
ZOOM  
CH  
3D  
PHONIC  
+
AMP VOL  
PREVIOUS  
NEXT  
STROBE  
CLEAR  
SLOW  
SELECT  
+
SLOW  
THEATER  
SUB TITLE AUDIO POSITION  
PLAY  
RM-SXV004A  
REMOTE CONTROL  
MODE  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
The following table shows basic functions of basic  
control buttons.  
As you can see 3, 7, 8and 4/¢buttons  
function the same as with Audio CD discs, though  
1/¡buttons function is different.  
I During playback  
1 Holding down the +10 button for 2 seconds  
Buttons  
Functions  
or more.  
- - -appears in the display window showing  
that you can now enter a three-figure number  
directly.  
Starts playback  
3
Stops playback completely  
Pauses playback temporarily  
Skips back or forward a Track*  
Skips back or forward a Group  
7
8
2 Use the numeric buttons (0 to 9) to specify  
the desired Track number directly.  
4/¢  
1/¡  
Example:  
To specify Track 254 : press 2, 5 and 4.  
* You can skip a Track across a Group. i.e. pressing  
¢when the last Track of the current Group is  
You can also specify a single- or double-figure  
Track using this method.  
selected skips to the first Track of the next Group.  
Example:  
NOTES  
To specify Track 5, press 0, 0 and 5.  
To specify Track 25, press 0, 2 and 5.  
The current Group and Track numbers are shown  
on the display window in the following manner.  
-
A B  
VCDVD  
GROUP TITLE TRACK CHAP  
1
PROGRAM  
RANDOM  
Current track elapsed time  
Current track number  
Current group number  
You cannot advance or reverse playback of an  
MP3 disc rapidly.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
• If you specify a wrong selection  
Press TV/VIDEO-CANCEL. The last selection  
programmed is erased.  
Advanced functions  
• To clear the program  
Press 7 .  
Program playback  
You can playback Groups on an MP3 disc in the  
desired order.  
4 Press 3 to start program play.  
When all of the programmed groups have  
finished playback, the unit stops but the  
program remains.  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
• To quit program playback  
Press 7 while stopped.  
TV7  
TV8  
TV9  
7
8
TV0  
0
9
3
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
The “PROGRAM” indicator in the display window  
turns off.  
Note that the program remains.  
To clear the program, press 7 while the program  
table is shown on the TV screen.  
CH  
+
2-2  
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2-1  
4
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
• While stopped and the play mode menu is  
displayed on the TV screen, by moving to  
[PROGRAM] and pressing ENTER, the program  
mode quits. Note that the program remains.  
RM-SXV004A  
REMOTE CONTROL  
I While stopped  
NOTES  
1 Press PLAY MODE.  
You cannot playback Tracks in a Group in the  
desired order.  
The play mode menu appears on the TV  
screen.  
By pressing PLAY MODE during program  
playback, the program table is displayed on the  
TV screen and the current program number is  
indicated in yellow.  
2 Use CURSOR 2/3 to move  
to  
[PROGRAM] and press ENTER.  
REPEAT  
PROGRAM  
RANDOM  
1
7
2
8
3
9
4
5
6
10  
16  
11  
17  
12  
18  
13  
14  
15  
The program table appears under the menu  
bar (as shown above).  
The “PROGRAM” indicator appears in the  
display window on the front panel.  
3 Specify the groups in the desired order  
using the numeric buttons.  
See page 11 for details about how to use the  
numeric buttons.  
Up to 18 groups can be programmed. You may  
select the same group more than once.  
REPEAT  
PROGRAM  
RANDOM  
1
3
7
2
2
8
3
1
9
4
2
10  
5
6
11  
17  
12  
18  
13  
14  
15  
16  
The programmed group  
number is shown under  
each program number.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                            
                                
MP3 disc playback  
English  
Random playback  
Repeat playback  
You can playback Groups on an MP3 disc in random  
order.  
You can repeat playback of the current Group or all  
Groups.  
TV  
DVD  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
TV7  
TV8  
TV9  
MUTING  
7
TV  
10  
8
TV0  
0
9
+
10  
MUTING  
TV/VIDEO  
CANCEL  
+
10  
RETURN  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
3
CH  
+
2-2  
+
VOL  
VOL  
+
VOL  
VOL  
ENTER  
ENTER  
CH  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2-1  
SELECT  
SELECT  
+
SLOW  
SLOW  
PLAY  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
THEATER  
MODE SUB TITLE AUDIO POSITION  
1
DIGEST ANGLE  
ZOOM  
1
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
RM-SXV004A  
REMOTE CONTROL  
I While stopped  
I During playback  
1 Press PLAY MODE.  
1 Press PLAY MODE.  
The play mode menu appears on the TV  
screen.  
The play mode menu appears on the TV  
screen.  
2
Use CURSOR 2/3to move to [RANDOM].  
2
Use CURSOR 2/3to move to [REPEAT],  
then press ENTER.  
REPEAT  
PROGRAM  
RANDOM  
Each time you press ENTER, the repeat mode  
changes as follows depending on the disc type  
and units status:  
CD CONTROL  
REPEAT A-B REPEAT TIME SEARCH  
REPEAT ALL  
3 Press ENTER.  
The unit starts random playback.  
The RANDOMindicator appears in the  
display window on the front panel. After  
playing all groups of the disc, random  
playback ends.  
Selected repeat mode  
REPEAT ALL (all group repeat)  
REPEAT 1 (current group repeat)  
The same group will not be played back more than  
once during random play.  
No indication  
(off)  
To stop/quit random playback in the middle  
Press 7to stop playback. The unit is still in  
random playback mode, so pressing 3starts  
random playback again.  
To quit random playback, press 7again while  
stopped. The RANDOMindicator in the display  
window turns off.  
If you press 7in REPEAT ALL or REPEAT1 mode,  
the unit stops playback but remains in the mode.  
To quit repeat playback  
With  
pointed at [REPEAT], press ENTER  
repeatedly until the mode is set to off.  
NOTES  
Tracks in a Group are played back in the  
NOTE  
regular order.  
To turn off the play mode menu display.  
Pressing the 4/¢ button while random  
playback skips forward or back a track.  
Press PLAY MODE.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 disc playback  
Disc/time information  
TV  
DVD  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
TV  
10  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
+
VOL  
VOL  
ENTER  
CH  
1
PREVIOUS  
CLEAR  
NEXT  
STROBE  
SELECT  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
I During playback  
1 Press DISPLAY.  
The disc/time display appears on the TV screen.  
MP3 GROUP 1 TRACK 11  
00:08 BITRATE 128kbps  
TIME  
Transmission rate  
Current track elapsed time  
Time mode  
Current track number  
Current group number  
Disc type  
To turn off the disc/time display  
Press DISPLAY.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
English  
3 Press CURSOR 2/3to select the setting  
Selecting preferences  
you want.  
To turn off the preference display, press CHOICE  
You can set various preferences for playback via  
four dedicated displays.  
or move  
to [EXIT] and press ENTER.  
For details about each setting, see the  
following paragraphs:  
How to set preferences  
Note that you cannot bring up a preference display  
during playback or when an Audio CD or MP3 disc  
is loaded in the disc tray.  
LANGUAGE page  
MENU LANGUAGE  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
You can select the default displaylanguage to be  
TV1  
1
TV2  
2
TV3  
3
displayed if it is contained on the disc.  
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
TV  
10  
8
TV0  
0
9
The language is initially set to ENGLISH.”  
Each time you press CURSOR 3, the language  
setting changes in the following order:  
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
3
1
+
VOL  
VOL  
ENTER  
CH  
2
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
PREVIOUS  
CLEAR  
NEXT  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
SELECT  
STROBE  
ENGLISH  
ENGLISH  
ENGLISH  
+
SLOW  
PLAY  
SLOW  
ON SCREEN LANGUAGE  
THEATER  
MODE SUB TITLE AUDIO POSITION  
EXIT  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
PRESS  
KEY  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language  
code from AA to ZU  
I
When no disc is inserted in the disc tray, or when a  
DVD VIDEO or Video CD/SVCD is inserted and stopped  
(See Appendix A : Table of languages and their  
abbreviationsat the end of this manual.)  
1 Press CHOICE.  
One of the preference pages appears on the TV  
screen.  
Pressing CURSOR 2changes the language setting  
in the reverse order of the above.  
There are four preference pages: LANGUAGE,  
AUDIO, DISPLAY and SYSTEM. To turn the page,  
* If the selected language is not recorded, the  
move  
LANGUAGE  
to the desired tab using CURSOR 2/3.  
discs default display language will be displayed.  
AUDIO  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
AUDIO LANGUAGE  
ENGLISH  
STREAM / PCM  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
ENGLISH  
ENGLISH  
ENGLISH  
You can select the default audio language to be  
Lo / Ro  
ON  
COMPRESSION  
played if it is contained on the disc.  
ON SCREEN LANGUAGE  
EXIT  
EXIT  
The language is initially set to ENGLISH.”  
Each time you press CURSOR 3, the language  
setting changes in the following order :  
PRESS  
KEY  
PRESS  
KEY  
DISPLAY  
SYSTEM  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ENGLISH  
AUDIO  
DISPLAY  
SYSTEM  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
LANGUAGE  
ENGLISH  
ENGLISH  
ENGLISH  
4:3 LB  
MODE 2  
ON  
OFF  
OFF  
AUTO STANDBY  
RESUME  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
ON SCREEN LANGUAGE  
DVD 1  
AV COMPULINK MODE  
EXIT  
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
PRESS  
KEY  
ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language  
code from AA to ZU  
(See Appendix A : Table of languages and their  
abbreviationsat the end of this manual.)  
2 Move  
to select the item you want to set  
by using CURSOR 5/.  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
Pressing CURSOR 2changes the language setting  
in the reverse order of the above.  
ENGLISH  
ENGLISH  
ENGLISH  
ON SCREEN LANGUAGE  
* If the selected language is not recorded, the  
discs default audio language will be played.  
EXIT  
PRESS  
KEY  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
SUBTITLE  
AUDIO page  
You can select the default subtitle language to be  
displayed if it is contained on the disc.  
DIGITAL AUDIO OUTPUT  
To connect the units digital output to an external  
device equipped with a digital input, this item must be  
set correctly.  
DIGITAL AUDIO OUTPUT is initially set to  
STREAM/PCM.”  
The language is initially set to ENGLISH.”  
Each time you press CURSOR 3, the language  
setting changes in the following order:  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
ON SCREEN LANGUAGE  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
EXIT  
STREAM / PCM  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
Lo / Ro  
ON  
PRESS  
KEY  
COMPRESSION  
EXIT  
PRESS  
KEY  
ENGLISH SPANISH FRENCH CHINESE →  
GERMAN ITALIAN JAPANESE language  
code from AA to ZU  
(See Appendix A : Table of languages and their  
abbreviationsat the end of this manual.)  
PCM ONLY  
When you connect the DIGITAL OUT jack of the  
unit to the linear PCM digital input of other audio  
equipment.  
Pressing CURSOR 2changes the language setting  
in the reverse order of the above.  
STREAM/PCM  
When you connect to the digital input of an  
amplifier to a built-in DTS, Dolby Digital, or MPEG  
multichannel decoder.  
* If the selected language is not recorded, the  
discs default subtitle language will be displayed.  
DOLBY DIGITAL/PCM  
ON SCREEN LANGUAGE  
When you connect to the digital input of a Dolby  
Digital decoder, or an amplifier with a built-in  
Dolby Digital decoder.  
You can select the on-screen display language to be  
displayed.  
The language is initially set to ENGLISH.”  
Each time you press CURSOR 3, the language  
setting changes as follows:  
The following chart shows the relationship between  
types of playback discs and output signals.  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
Output  
ENGLISH  
MENU LANGUAGE  
AUDIO LANGUAGE  
SUBTITLE  
ENGLISH  
ENGLISH  
ENGLISH  
Playback  
discs  
DOLBY  
DIGITAL/  
PCM  
ON SCREEN LANGUAGE  
STREAM/  
PCM  
PCM  
ONLY  
EXIT  
PRESS  
KEY  
DVDwith48kHz, 48 kHz,16 bit  
16 bit linear PCM linear PCM  
+
+
+
DVDwith48kHz, 48 kHz,  
20/24 bit linear  
PCM  
20/24 bit  
linear PCM  
+
DVDwith96kHz,  
linear PCM  
No output  
+
No output  
+
+
+
DTS  
bitstream  
DVD with DTS  
DVD with  
Dolby Digital  
Dolby Digital  
bitstream  
48 kHz, 16 bit  
linear PCM  
ON SCREEN LANGUAGE  
BILDSCHIRMMENUE-SPRACHE  
English  
German  
ENGLISH  
DEUTSCH  
FRANCAIS  
DVDwithMPEG MPEG  
multichannel bitstream  
44.1 kHz,  
Video CD/SVCD 16 bit  
linear PCM  
48 kHz, 16 bit  
linear PCM  
+
+
+
French  
+
+
Pressing CURSOR 2changes the language setting  
in the reverse order of the above.  
48 kHz,16 bit  
linear PCM  
Audio CD  
Audio CD with DTS  
+
+
+
+
DTS  
bitstream  
MP3 disc  
No output  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
COMPRESSION  
You can compress the dynamic range of the sound  
if needed. Using this function, you can listen to  
sound at low volumes easily.  
English  
NOTES  
• The unit does not provide the DTS decoding  
function.  
• When playing a DVD VIDEO or Audio CD disc  
with DTS, use a DTS decoder to get correct  
signals from your speakers. Never use the  
unit’s analog output jacks, which output  
incorrect signals that may damage your  
speakers.  
• COMPRESSION is initially set to “ON.”  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
STREAM / PCM  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
Lo / Ro  
ON  
COMPRESSION  
EXIT  
• If you connect the analog outputs and digital  
outputs simultaneously, be sure to select the  
source of the amplifier correctly, or set the  
level control of the amplifier connected to the  
analog outputs to minimum.  
PRESS  
KEY  
• ON  
Audio is played back with the dynamic range  
compressed.  
DOWN MIX  
• OFF  
To playback a DVD VIDEO disc recorded with  
surround multichannel audio correctly, the DOWN  
MIX setting must be properly made according to  
your audio system.  
Audio is played back as it was recorded.  
NOTES  
Note that this setting affects the output signal from  
the AUDIO (both DIGITAL and ANALOG) output  
jacks when playing back a DVD VIDEO disc recorded  
with surround multichannel audio.  
• The Compression function works only when  
playing back a disc recorded with DOLBY  
DIGITAL 1CH or 2CH. The setting is not  
effective for other discs.  
• DOWN MIX is initially set to “Lo/Ro.”  
• The Compression function does not work  
when the 3D PHONIC function is activated.  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
• With the digital connection, the  
STREAM / PCM  
DIGITAL AUDIO OUTPUT  
DOWN MIX  
Lo / Ro  
ON  
COMPRESSION settings in the AUDIO page of  
the preference display are invalid. Settings for  
these items must be made from the decoder.  
COMPRESSION  
EXIT  
PRESS  
KEY  
• Lt/Rt  
When you enjoy multichannel surround audio by  
connecting the unit’s AUDIO output (normally, the  
DIGITAL output) to a surround decoder.  
• L0/R0  
When you enjoy conventional 2-channel stereo  
audio by connecting the unit’s AUDIO output to a  
stereo amplifier/receiver or television set, or  
when you duplicate audio of a DVD VIDEO disc  
recorded with surround audio to your MD,  
cassette, etc.  
NOTES  
• The DOWN MIX function does not work when  
the 3D PHONIC function is activated.  
• The DOWN MIX setting does not affect an  
MPEG or Dolby Digital bitstream signal from  
DIGITAL OUT.  
To enjoy the DOWN MIX effect from DIGITAL  
OUT when playing back a disc recorded with  
the MPEG multichannel or Dolby Digital format,  
set “DIGITAL AUDIO OUTPUT” to “PCM ONLY”  
(see page 46).  
• When playing back a disc recorded with DTS,  
you cannot get the DOWN MIX effect from  
both DIGITAL and ANALOG outputs.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
SCREEN SAVER  
DISPLAY page  
A television monitor screen may be burned out if a  
static picture is displayed for a long time. To prevent  
this, the unit automatically activates the screen  
saver function if a static picture, such as an on-  
screen display or menu, is displayed for over 5  
minutes.  
MONITOR TYPE  
You can select the monitor type to match your TV  
when you playback DVD VIDEO discs recorded for  
wide screen televisions.  
MONITOR TYPE is initially set to 4:3 LB  
.”  
SCREEN SAVER is initially set to MODE 2.”  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
LANGUAGE  
LANGUAGE  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
MODE 2  
ON  
MODE 2  
ON  
EXIT  
EXIT  
PRESS  
KEY  
PRESS  
KEY  
MODE 1  
The current picture gets dark.  
4:3 LB  
(Letter Box Conversion)  
When you connect a normal TV to the unit.  
When you play a wide picture recorded on a DVD  
VIDEO disc, the picture is displayed with bands  
across the upper and lower portions of the screen.  
MODE 2  
The screen saverpicture appears and its  
brightness changes.  
OFF  
The screen saver function is off.  
NOTES  
The monitor screen of a projector or projection  
TV is easily burned out if the screen saver  
mode is set to OFF and a static picture is  
displayed for a long time.  
4:3 PS  
(Pan Scan Conversion)  
When you connect a normal TV to the unit.  
When you play a wide picture recorded on a DVD  
VIDEO disc, a portion of the picture is  
The screen saver function is not activated  
when the selected disc is an Audio CD or MP3  
disc.  
automatically cut off from the left and right sides  
of the image.  
Depending on the disc, it may not be possible to  
playback in this mode. In that case, the picture is  
ON SCREEN GUIDE  
The unit can display on-screen guideicons or  
characters on the picture, which show what is  
happening to the disc or the unit.  
played back as in 4:3 LB  
mode.  
ON SCREEN GUIDE is initially set to ON.”  
AUDIO  
DISPLAY  
4:3 LB  
SYSTEM  
LANGUAGE  
MONITOR TYPE  
SCREEN SAVER  
ON SCREEN GUIDE  
MODE 2  
ON  
EXIT  
PRESS  
KEY  
16:9 WIDE (Wide Television screen)  
When you connect a wide-screen TV to the unit.  
ON  
The on-screen guide will be displayed.  
OFF  
The on-screen guide will not be displayed.  
Examples of on-screen guideicons or  
characters are following (see page 11) :  
,
,
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
English  
SYSTEM page  
Limiting playback by  
children  
This function restricts playback of DVD VIDEO discs  
which contain violent (and other) scenes according  
to the level set by the user. For example, if a movie  
which includes violent scenes supports the parental  
lock feature, such scenes which you do not want to  
let children view can be cut or replaced with other  
scenes.  
AUTO STANDBY  
When the unit is stopped for more than 30 minutes or 60  
minutes, the unit enters standby mode automatically.  
AUTO STANDBY is initially set to OFF.”  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
OFF  
OFF  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
EXIT  
PRESS  
KEY  
To set Parental Lock for the first time  
[PARENTAL LOCK]  
60  
Time is set to 60 minutes.  
30  
Time is set to 30 minutes.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
OFF  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
The auto standby function is off.  
TV7  
TV8  
TV9  
6
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
1, 3, 5, 7  
+
VOL  
VOL  
RESUME  
ENTER  
CH  
You can select the resume function to be on or off.  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
2, 4  
See page 24.  
RESUME is initially set to OFF.”  
SELECT  
1
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
AUDIO  
DISPLAY  
SYSTEM  
DIGEST ANGLE  
ZOOM  
LANGUAGE  
3D  
PHONIC  
OFF  
OFF  
+
AMP VOL  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
RM-SXV004A  
REMOTE CONTROL  
EXIT  
PRESS  
KEY  
I While a DVD VIDEO disc is stopped or no disc is  
inserted  
ON  
Pressing 3while stopped or on standby starts  
playback from the resume point if it is  
memorized.  
1 Press ENTER while holding down 7on the  
remote control unit.  
The Parental Lock on-screen display appears  
on the TV screen.  
OFF  
points [Country Code].  
Pressing 3while stopped or on standby starts  
playback from the beginning of the disc.  
2 While  
points [Country Code], use  
CURSOR 2/3to select the country code.  
NOTE  
The resume function does not work for Audio  
The country code whose standards were applied  
to rate the DVD VIDEO disc should be selected.  
See Appendix B : Country/Area code list for  
parental lock.(See page 57.)  
CDs and MP3 discs.  
PARENTAL LOCK  
AV COMPULINK MODE  
GB  
Country Code  
Set Level  
This item is provided for use in the future. Leave it as  
- - - -  
PASSWORD  
the default setting (DVD1).  
EXIT  
AUDIO  
DISPLAY  
SYSTEM  
LANGUAGE  
PRESS  
KEY  
ENTER  
OFF  
OFF  
AUTO STANDBY  
RESUME  
DVD 1  
AV COMPULINK MODE  
EXIT  
3 Press ENTER.  
PRESS  
KEY  
moves to [Set Level].  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
4 While  
points [Set Level], use CURSOR  
2/3to select the parental lock level.  
To change the settings [PARENTAL  
LOCK]  
PARENTAL LOCK  
GB  
1
Country Coce  
Set Level  
You can change the Parental lock settings later.  
- - - -  
PASSWORD  
TV  
DVD  
EXIT  
STANDBY/ON  
OPEN/  
CLOSE  
TV  
DVD  
PRESS  
KEY  
ENTER  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
7
8
TV0  
0
9
2-1, 5-1  
TV  
10  
MUTING  
+
10  
Each time you press CURSOR 2/3, the  
TV/VIDEO  
CANCEL  
RETURN  
1, 2-2, 3-2,  
4-2, 5-2  
3-1, 4-1  
parental level changes as follows:  
CH  
+
+
VOL  
VOL  
ENTER  
1
.
CH  
PREVIOUS  
CLEAR  
NEXT  
.
SELECT  
STROBE  
.
1
+
SLOW  
PLAY  
SLOW  
THEATER  
8
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
RM-SXV004A  
REMOTE CONTROL  
• “1is the strictest level. “–” means no restriction.  
Discs rated higher than the selected level are  
restricted.  
I While a DVD VIDEO disc is stopped or no disc is  
inserted  
1 Press ENTER while holding down 7on the  
remote control unit.  
The Parental Lock on-screen display appears  
on the TV screen.  
5 Press ENTER.  
moves to [PASSWORD].  
points [PASSWORD].  
6 Enter your 4-digit password using the  
PARENTAL LOCK  
numeric buttons (0 to 9).  
GB  
8
Country Code  
Set Level  
- - - -  
PASSWORD  
PARENTAL LOCK  
GB  
8
Country Code  
Set Level  
EXIT  
- - - -  
PASSWORD  
CURRENT PASSWORD? ··· PRESS 0~9 KEY  
EXIT  
NEW PASSWORD? ··· PRESS 0~9 KEY.  
2 Enter your current 4-digit password using  
the numeric buttons (0 to 9) and press  
ENTER.  
7 Press ENTER.  
The parental level and password are set.  
moves to [EXIT].  
moves to [Country Code] if you enter the  
correct password.  
If you enter the wrong password, WRONG!  
RETRY...appears on the TV screen, and you  
cannot go to next step.  
Pressing ENTER again returns to the opening  
display.  
If you enter an undesired password in step 6  
above, reenter the password before pressing  
ENTER.  
3 To change the country code, use CURSOR  
2/3to select the desired country code and  
press ENTER.  
moves to [Set Level].  
When you change the country code, you must  
select the parental level.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial settings  
English  
4 To change the set level, use CURSOR 2/3  
To temporarily release the Parental  
lock [PARENTAL LOCK]  
to select the desired level while  
points  
[Set Level], and then press ENTER.  
When you set the parental level strictly, some discs  
may not be played back at all. When you insert such  
a disc and try to play it, the following Parental Lock  
on-screen display appears on the TV screen, asking  
you whether you want the parental lock to be  
temporarily released or not.  
moves to [PASSWORD].  
5 Enter the password using the numeric  
buttons (0 to 9) and press ENTER.  
moves to [EXIT].  
The password entered in the above step  
becomes the new password. If you do not  
change the password, enter the same  
password as in the step 2.  
TV  
DVD  
STANDBY/ON  
TV  
OPEN/  
CLOSE  
DVD  
TV1  
1
TV2  
2
TV3  
3
TV4  
4
TV5  
5
TV6  
6
TV7  
TV8  
TV9  
Even if you want to change only the country/  
area code and/or set level, do not forget to  
enter the password after changing the country/  
area code and/or set level. Otherwise, the new  
country code and/or set level will not become  
effective.  
2
7
TV  
10  
8
TV0  
0
9
MUTING  
+
10  
TV/VIDEO  
CANCEL  
RETURN  
CH  
+
1-2  
+
VOL  
VOL  
ENTER  
CH  
PREVIOUS  
CLEAR  
NEXT  
STROBE  
1-1  
SELECT  
Pressing ENTER again returns to the opening  
display.  
+
SLOW  
SLOW  
PLAY  
THEATER  
MODE SUB TITLE AUDIO POSITION  
DIGEST ANGLE  
ZOOM  
3D  
PHONIC  
+
AMP VOL  
NOTES  
When you enter the wrong password more  
RM-SXV004A  
REMOTE CONTROL  
than 3 times in step 2 above,  
moves to  
[EXIT] automatically and CURSOR 5/does  
not work.  
If you forget your password in step 2  
Enter 8888.”  
1 Use the CURSOR 5/to move  
[YES], then press ENTER.  
to  
moves to the PASSWORD field.  
When selecting [NO], press OPEN/CLOSE to  
remove the disc.  
PARENTAL LOCK  
This DISC cant play now!  
Temporary  
Level Change ?  
NO  
YES  
– – – –  
PASSWORD  
PRESS ENTER  
EXECUTE  
2 Enter your 4-digit password using the  
numeric buttons (0 to 9).  
If you enter the wrong password, WRONG!  
RETRY...appears on the TV screen.  
Enter the correct password.  
The Parental lock is released, and the unit  
starts playback.  
NOTE  
When you enter the wrong password more  
than 3 times in step 2 above,  
moves to [NO]  
automatically and CURSOR 5/do not work.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Care and handling of discs  
How to handle discs  
When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily  
damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up  
correctly, and such a disc may cause the player to malfunction.  
Label side  
Do not damage the label side, stick paper to or use any adhesive on its surface.  
Storage  
Make sure that discs are kept in their cases. If discs are piled on top of one another without their protective  
cases, they can be damaged. Do not put discs in a location where they may be exposed to direct sunlight, or  
in a place where the humidity or temperature is high. Avoid leaving discs in your car!  
Maintenance of discs  
If there are fingerprints or other dirt adhering to a disc, wipe with a soft dry cloth, moving from the center  
outwards.  
If a disc is difficult to clean, wipe with a cloth moistened with water. Never use record cleaners, petrol, alcohol  
or any anti-static agents.  
CAUTION  
Sometimes during playback noise or images may be garbled. This is sometimes due to the disc. (It may  
not be up to industry standards.)  
These symptoms are caused by the discs, not by the malfunction of the unit.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
English  
Troubleshooting  
What appears to be a malfunction may not always be serious. Please go through the following list before  
requesting service.  
Symptom  
Possible case  
Remedy  
Power does not come on.  
Power plug is not inserted securely.  
Too far from the unit.  
Plug in securely.  
More closer to the unit.  
Point the infrared light- emitting  
window toward the remote sensor on  
the front panel.  
The tip of the remote unit is not  
pointed in the right direction.  
Remote control does not work.  
Batteries are exhausted.  
Replace the batteries with new ones.  
Take out the batteries and insert them  
again in the correct direction.  
Battery polarity is incorrect.  
The TV/VIDEO - CANCEL,  
CURSOR or numeric buttons do  
not work.  
To control the unit, set the TV - DVD  
switch to DVD.To control your TV,  
set the TV - DVD switch to TV.”  
The TV - DVD switch is not correctly  
set.  
Connection of video cable is incorrect.  
Input selection of TV is incorrect.  
Disc is not playable.  
Connect the cable correctly.  
Select correctly.  
No picture is displayed on the  
monitor.  
Use a playable disc (see page 12).  
The unit is set to feed the RGB  
signals (instead of the S-video  
signals).  
Picture is not normal when  
using the S-VIDEO jack.  
Make the unit feed the S-video signals  
(see pages 13 and 15).  
The unit is connected to a VCR  
directly and the copyguard function  
is activated.  
Connect the unit so that the picture  
signal flows directly to the TV.  
Picture is noisy.  
Connection is incorrect.  
Check the connections.  
Select correctly.  
No audio is reproduced.  
Input selection of amplifier is  
incorrect.  
No audio is reproduced when  
playing back a DVD disc  
recorded with 96 kHz, linear  
PCM audio.  
The audio signal is not derived  
from the unit's DIGITAL OUT.  
Use the AUDIO OUT when playing back  
such discs.  
Sound is distorted or noise is  
generated.  
Disc is dirty.  
Wipe the disc surface.  
MONITOR TYPE is not correctly set.  
Television is not correctly set.  
Select monitor type correctly (see page 48).  
Set the television correctly.  
Picture does not fit the  
television screen.  
Turn off the power and unplug the  
power cord, then connect the power  
cord again.  
Microcomputer malfunction due to  
lightning or static electricity.  
Operation is not possible.  
Moisture condensation caused by a  
sudden change of temperature or  
humidity.  
Turn off the power, then turn it on a few  
hours later.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
For MP3 disc playback  
Symptom  
Possible case  
Remedy  
MP3 disc is recorded with the  
packet writing.”  
No sound comes out.  
It cannot be played.  
Specific files (tracks) are not  
played.  
Files other than MP3 are included.  
They cannot be played.  
This system plays the files in the  
alphabetic order. So, the playback  
order can vary.  
Files (tracks) are not played in  
the recorded order.  
Particular function does not  
work.  
On MP3 disc, some functions do  
not work.  
For unavailable functions, see page 40.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
English  
Specifications  
General  
Readable discs:  
DVD VIDEO, Audio CD (CD-DA), Video CD, SVCD, CD-R/RW (CD-DA, SVCD,  
Video CD, MP3 Format), MP3 Format  
PAL  
Video format:  
Other  
Power requirements:  
Power consumption:  
Mass:  
AC 230 V  
, 50 Hz  
14 W (POWER ON), 4.2 W (STANDBY mode)  
2.0 kg  
Dimensions (W x H x D):  
230 mm x 66.5 mm x 298.7 mm  
Video output  
VIDEO OUT (pin jack):  
S-VIDEO OUT (S jack):  
1.0 Vp-p (75 )  
Y Output:  
1.0 Vp-p (75 )  
286 mVp-p (75 )  
C Output:  
0-700 mV (75 Ω)  
500 Lines  
RGB out:  
Horizontal resolution:  
Audio outputs  
ANALOG OUT (pin jack):  
DIGITAL OUT:(COAXIAL):  
2.0 Vrms (10 k)  
0.5 Vp-p (75 termination)  
Audio characteristics  
Frequency response:  
CD  
(sampling frequency 44.1 kHz): 2 Hz to 20 kHz  
DVD (sampling frequency 48 kHz): 2 Hz to 22 kHz  
DVD (sampling frequency 96 kHz): 2 Hz to 44 kHz  
16 bit: More than 98 dB  
Dynamic range:  
20 bit: More than 106 dB  
24 bit: More than 106 dB  
Unmeasurable (less than 0.002%)  
Less than 0.002%  
Wow and flutter:  
Total harmonic distortion:  
* Specifications and appearance subject to change without prior notice.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Appendix A : Table of languages and their abbreviations  
When you select the subtitle language or sound, the languages shown below are displayed as abbreviations.  
To select the desired language, select the abbreviation corresponding the language you want to.  
AA  
AB  
AF  
AM  
AR  
AS  
AY  
AZ  
BA  
BE  
BG  
BH  
BI  
BN  
BO  
BR  
CA  
CO  
CS  
CY  
DA  
DZ  
EL  
Afar  
IK  
IN  
IS  
IW  
JI  
JW  
KA  
KK  
KL  
KM  
KN  
KO  
KS  
KU  
KY  
LA  
LN  
LO  
LT  
Inupiak  
RN  
RO  
RU  
RW  
SA  
SD  
SG  
SH  
SI  
Kirundi  
Rumanian  
Russian  
Kinyarwanda  
Sanskrit  
Sindhi  
Sangho  
Serbo-Croatian  
Singhalese  
Slovak  
Abkhazian  
Afrikaans  
Ameharic  
Arabic  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Byelorussian  
Bulgarian  
Bihari  
Bislama  
Bengali, Bangla  
Tibetan  
Indonesian  
Icelandic  
Hebrew  
Yiddish  
Javanese  
Georgian  
Kazakh  
Greenlandic  
Cambodian  
Kannada  
Korean (KOR)  
Kashmiri  
Kurdish  
SK  
SL  
Slovenian  
Samoan  
Shona  
SM  
SN  
SO  
SQ  
SR  
SS  
ST  
SU  
SV  
SW  
TA  
TE  
TG  
TH  
TI  
TK  
TL  
TN  
TO  
TR  
TS  
TT  
TW  
UK  
UR  
UZ  
VI  
VO  
WO  
XH  
YO  
ZU  
Somali  
Kirghiz  
Latin  
Lingala  
Albanian  
Serbian  
Siswati  
Sesotho  
Sundanese  
Swedish  
Swahili  
Tamil  
Breton  
Catalan  
Corsican  
Czech  
Welsh  
Danish  
Bhutani  
Greek  
Esperanto  
Estonian  
Basque  
Persian  
Finnish  
Fiji  
Faroese  
Frisian  
Laothian  
Lithuanian  
Latvian, Lettish  
Malagasy  
Maori  
Macedonian  
Malayalam  
Mongolian  
Moldavian  
Marathi  
Malay (MAY)  
Maltese  
Burmese  
Nauru  
Nepali  
Dutch  
Norwegian  
Occitan  
(Afan) Oromo  
Oriya  
Panjabi  
Polish  
Pashto, Pushto  
Portuguese  
Quechua  
Rhaeto-Romance  
LV  
MG  
MI  
MK  
ML  
MN  
MO  
MR  
MS  
MT  
MY  
NA  
NE  
NL  
NO  
OC  
OM  
OR  
PA  
PL  
Telugu  
Tajik  
Thai  
EO  
ET  
EU  
FA  
FI  
Tigrinya  
Turkmen  
Tagalog  
Setswana  
Tonga  
Turkish  
Tsonga  
Tatar  
FJ  
FO  
FY  
GA  
GD  
GL  
GN  
GU  
HA  
HI  
HR  
HU  
HY  
IA  
Irish  
Scots Gaelic  
Galician  
Guarani  
Gujarati  
Hausa  
Twi  
Ukrainian  
Urdu  
Uzbek  
Hindi  
Vietnamese  
Volapuk  
Wolof  
Xhosa  
Yoruba  
Zulu  
Croatian  
Hungarian  
Armenian  
Interlingua  
Interlingue  
PS  
PT  
QU  
RM  
IE  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
English  
Appendix B : Country/Area code list for parental lock  
This list is used for the parental Lock operation. For details, see page 49.  
ES Spain  
ET Ethiopia  
LB Lebanon  
LC Saint Lucia  
SA Saudi Arabia  
SB Solomon Islands  
SC Seychelles  
SD Sudan  
AD Andorra  
AE United Arab Emirates  
AF Afghanistan  
FI  
Finland  
LI  
Liechtenstein  
FJ Fiji  
LK Sri Lanka  
AG Antigua and Barbuda  
Falkland Islands  
LR Liberia  
LS Lesotho  
LT Lithuania  
LU Luxembourg  
LV Latvia  
LY Libyan Arab Jamahiriya  
MA Morocco  
MC Monaco  
MD Moldova, Republic of  
MG Madagascar  
MH Marshall Islands  
ML Mali  
MM Myanmar  
MN Mongolia  
MO Macau  
SE Sweden  
SG Singapore  
SH Saint Helena  
AI  
Anguilla  
FK  
(Malvinas)  
AL Albania  
AM Armenia  
Micronesia  
(Federated States of)  
FO Faroe Islands  
FR France  
FX France, Metropolitan  
GA Gabon  
GB United Kingdom  
GD Grenada  
GE Georgia  
GF French Guiana  
GH Ghana  
FM  
SI  
Slovenia  
AN Netherlands Antilles  
AO Angola  
AQ Antarctica  
AR Argentina  
AS American Samoa  
AT Austria  
Svalbard and Jan  
Mayen  
SJ  
SK Slovakia  
SL Sierra Leone  
SM San Marino  
SN Senegal  
SO Somalia  
SR Suriname  
ST Sao Tome and Principe  
SV El Salvador  
SY Syrian Arab Republic  
SZ Swaziland  
TC Turks and Caicos Islands  
TD Chad  
AU Australia  
AW Aruba  
AZ Azerbaijan  
BA Bosnia and Herzegovina  
BB Barbados  
BD Bangladesh  
BE Belgium  
BF Burkina Faso  
BG Bulgaria  
BH Bahrain  
GI  
Gibraltar  
GL Greenland  
GM Gambia  
Northern Mariana  
Islands  
MP  
GN Guinea  
GP Guadeloupe  
GQ Equatorial Guinea  
GR Greece  
South Georgia and the  
South Sandwich Islands  
GT Guatemala  
GU Guam  
GW Guinea-Bissau  
GY Guyana  
MQ Martinique  
MR Mauritania  
MS Montserrat  
MT Malta  
MU Mauritius  
MV Maldives  
MW Malawi  
French Southern  
Territories  
TF  
BI  
Burundi  
TG Togo  
BJ Benin  
BM Bermuda  
BN Brunei Darussalam  
BO Bolivia  
BR Brazil  
BS Bahamas  
BT Bhutan  
BV Bouvet Island  
BW Botswana  
BY Belarus  
BZ Belize  
CA Canada  
CC Cocos (Keeling) Islands  
CF Central African Republic  
CG Congo  
CH Switzerland  
CI  
CK Cook Islands  
CL Chile  
CM Cameroon  
CN China  
CO Colombia  
CR Costa Rica  
CU Cuba  
CV Cape Verde  
CX Christmas Island  
CY Cyprus  
CZ Czech Republic  
DE Germany  
DJ Djibouti  
DK Denmark  
DM Dominica  
DO Dominican Republic  
DZ Algeria  
GS  
TH Thailand  
TJ Tajikistan  
TK Tokelau  
TM Turkmenistan  
TN Tunisia  
TO Tonga  
TP East Timor  
TR Turkey  
MX Mexico  
MY Malaysia  
MZ Mozambique  
NA Namibia  
NC New Caledonia  
NE Niger  
HK Hong Kong  
Heard Island and  
McDonald Islands  
HN Honduras  
HR Croatia  
HT Haiti  
HM  
TT Trinidad and Tobago  
TV Tuvalu  
TW Taiwan  
NF Norfolk Island  
NG Nigeria  
HU Hungary  
Tanzania, United  
Republic of  
NI  
Nicaragua  
TZ  
ID  
IE  
IL  
Indonesia  
Ireland  
Israel  
NL Netherlands  
NO Norway  
NP Nepal  
NR Nauru  
NU Niue  
NZ New Zealand  
OM Oman  
PA Panama  
PE Peru  
PF French Polynesia  
PG Papua New Guinea  
PH Philippines  
PK Pakistan  
PL Poland  
UA Ukraine  
UG Uganda  
IN  
India  
United States Minor  
Outlying Islands  
Cô te dIvoire  
UM  
British Indian Ocean  
Territory  
Iraq  
Iran (Islamic Republic of)  
Iceland  
Italy  
IO  
US United States  
UY Uruguay  
UZ Uzbekistan  
IQ  
IR  
IS  
IT  
Vatican City State  
(Holy See)  
VA  
JM Jamaica  
JO Jordan  
JP Japan  
KE Kenya  
KG Kyrgyzstan  
KH Cambodia  
Kiribati  
KM Comoros  
KN Saint Kitts and Nevis  
Korea, Democratic  
Peoples Republic of  
KR Korea, Republic of  
KW Kuwait  
KY Cayman Islands  
KZ Kazakhstan  
Saint Vincent and the  
Grenadines  
VC  
VE Venezuela  
VG Virgin Islands (British)  
VI  
Virgin Islands (U.S.)  
Saint Pierre and  
Miquelon  
VN Vietnam  
VU Vanuatu  
PM  
KI  
PN Pitcairn  
Wallis and Futuna  
Islands  
WF  
PR Puerto Rico  
PT Portugal  
PW Palau  
PY Paraguay  
QA Qatar  
RE Réunion  
RO Romania  
RU Russian Federation  
RW Rwanda  
WS Samoa  
YE Yemen  
KP  
YT Mayotte  
YU Yugoslavia  
ZA South Africa  
ZM Zambia  
ZR Zaire  
EC Ecuador  
EE Estonia  
EG Egypt  
EH Western Sahara  
ER Eritrea  
Lao Peoples  
Democratic Republic  
LA  
ZW Zimbabwe  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
“SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT”  
This equipment has been disigned and manufactured to meet international safety standards  
but, like any electrical equipment, care must be taken if you are to obtain the best results and  
safety is to be assured.  
Do read the operating instructions before you attempt to use the equipment.  
Do ensure that all electrical connections (including the mains plug, extension leads and  
interconnections between pieces of equipment) are properly made and in accordance with the  
manufacturer’s instructions. Switch off and withdraw the mains plug when making or  
changing connections.  
Do consult your dealer if you are ever in doubt about the installation, operation or safety of  
your equipment.  
Do be careful with glass panels or doors on equipment.  
DON’T continue to operate the equipment if you are in any doubt about it working normally, or  
if it is damaged in any way–switch off, withdraw the mains plug and consult your dealer.  
DON’T remove any fixed cover as this may expose dangerous voltages.  
DON’T leave equipment switched on when it is unattended unless it is specifically stated that it  
is designed for unattended operation or has a standby mode.  
Switch off using the switch on the equipment and make sure that your family know how to do  
this.  
Special arrangements may need to be made for infirm or handicapped people.  
DON’T use equipment such as personal stereos or radios so that you are distracted from the  
requirements of traffic safety. It is illegal to watch television whilst driving.  
DON’T listen to headphones at high volume as such use can permanently damage your  
hearing.  
DON’T obstruct the ventilation of the equipment, for example with curtains or soft furnishings.  
Overheating will cause damage and shorten the life of the equipment.  
DON’T use makeshift stands and NEVER fix legs with wood screws — to ensure complete  
safety always fit the manufacturer’s approved stand or legs with the fixings provided  
according to the instructions.  
DON’T allow electrical equipment to be exposed to rain or moisture.  
ABOVE ALL  
NEVER let anyone, especially children, push anything into holes, slots or any other opening  
in the case -this could result in a fatal electrical shock.;  
NEVER guess or take chances with electrical equipment of any kind -it is better to be safe  
than sorry!  
VICTOR COMPANY OF JAPAN, LIMITED  
EN  
J
V
C
0502KTYCREJSC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
Setting the VIDEO OUT Select Switch  
When you connect either the AV (SCART) connector or the S-VIDEO output of the unit to a TV, you need to appropriately  
set the S-VIDEO AND VIDEO/RGB switch and the COMP./RGB-Y/C switch on the rear panel of the unit.  
• For details, refer to pages 13 thru 15 of the INSTRUCTIONS.  
IMPORTANT!  
Note that you must change the switch position while the unit is stopped or the unit power is off (on standby) with the  
DVD removed. Otherwise, the changed setting is not effective.  
DEUTSCH  
Einstellen des Schalters VIDEO OUT  
Wenn Sie die AV-(SCART-)Buchse oder die S-VIDEO-Buchse des Gerätes an einen Fernseher anschließen müssen Sie  
den Schalter S-VIDEO AND VIDEO/RGB und den Schalter COMP./RGB-Y/C an der Geräterückseite richtig einstellen.  
• Näheres erfahren Sie auf Seiten 13 bis 15 unter BEDIENUNGSANLEITUNG.  
WICHTIG!  
Beachten Sie, dass Sie die Schalter bei gestopptem oder ausgeschaltetem Gerät (im Standby-Modus) und ohne  
eingelegte DVD betätigen müssen. Anderenfalls wird die Umschaltung nicht erkannt.  
FRANÇAIS  
Réglage du sélecteur VIDEO OUT  
Lors du raccordement du connecteur AV (SCART) ou de la sortie S-VIDEO du lecteur à un téléviseur, il convient de régler  
correctement les commutateurs S-VIDEO AND VIDEO/RGB et COMP./RGB-Y/C situés sur la face arrière de l’appareil.  
• Pour plus de détails, voir pages 13 à 15 des MANUAL D’INSTRUCTIONS.  
IMPORTANT!  
Changer la position du commutateur lorsque l’appareil est à l’arrêt ou lorsqu’il est hors tension (en attente), sans DVD  
inséré. Sinon, le changement ne sera pas opérationnel.  
NEDERLANDS  
De VIDEO OUT-keuzeschakelaar instellen  
Wanneer u de AV-connector (SCART) of de S-VIDEO-uitgang van de speler aansluit op een TV, moet u de S-VIDEO AND  
VIDEO/RGB-schakelaar en de COMP./RGB-Y/C-schakelaar op het achterpaneel van de speler op de juiste wijze instellen.  
• Voor meer details, raadpleeg pagina’s 13 t/m 15 van de GEBRUIKSAANWIJZING.  
BELANGRIJK!  
Let op: u moet de instelling van de schakelaar veranderen terwijl de speler is gestopt, of terwijl de speler is  
uitgeschakeld (in stand-by) terwijl de DVD verwijderd is. Anders is de gewijzigde instelling niet van kracht.  
ESPAÑOL  
Ajuste del conmutador selector VIDEO OUT  
Cuando inserte el conector AV (SCART) o la salida S-VIDEO de la unidad a un televisor, necesitará fijar el selector S-  
VIDEO AND VIDEO/RGB y el selector COMP./RGB-Y/C del panel posterior de la unidad.  
• Para más detalles, consulte las páginas 13 a 15 de las MANUAL DE INSTRUCCIONES.  
¡IMPORTANTE!  
Tenga en cuenta que debe cambiar el selector mientras la unidad esté parada o apagada (en standby) con el DVD  
fuera de la unidad. Caso contrario, los ajustes no serán efectivos.  
LE40883-001A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ITALIANO  
Impostazione del selettore VIDEO OUT  
Quando si collega il connettore AV (SCART) o luscita S-VIDEO dellunità a un televisore, è necessario impostare in modo  
corretto il selettore S-VIDEO AND VIDEO/RGB e il selettore COMP./RGB-Y/C nel pannello posteriore dellunità.  
Per ulteriori dettagli, fare riferimento alle pagine da 13 a 15 delle ISTRUZIONI.  
IMPORTANTE!  
Tenere presente che è necessario cambiare la posizione del selettore a lettore fermo o spento (su standby) con il DVD  
rimosso. In caso contrario, limpostazione modificata non avrà effetto.  
SVENSKA  
Ställa in VIDEO-utsignalens omkopplare  
När du ansluter spelarens AV-kontakt (SCART) eller S-VIDEO-utsignal till en TV-apparat, måste du ställa in S-VIDEO-  
OCH VIDEO/RGB-omkopplaren samt COMP./RGB-Y/C-omkopplaren på spelarens baksida.  
För mer information, se sidorna 13 till 15 i BRUKSANVISNING.  
VIKTIGT!  
Observera att enheten måste vara stoppad eller avstängd (i standby) och DVD-skivan uttagen när du växlar  
omkopplarens läge. Annars utförs inte ändringen.  
SUOMI  
VIDEO OUT SELECT -kytkimen asettaminen  
Kun kytket joko laitteen AV (SCART)- tai S-VIDEO -liittimen televisioon, laitteen takapaneelissa olevan S-VIDEO AND  
VIDEO/RGB- ja COMP./RGB Y/C -kytkimen pitää olla oikeassa asennossa.  
Katso lisätietoja KÄYTTÖHJE sivuilta 13 - 15.  
TÄRKEÄÄ!  
Kytkimen asennon voi muuttaa, kun laitteen toisto on pysäytetty tai siitä on katkaistu virta (valmiustilassa) eikä DVD-  
levyä ole levyasemassa. Muuten asetus ei ole voimassa.  
DANSK  
Indstilling af VIDEO OUT-vælger  
Når du forbinder systemets AV-stik (SCART-stikket) eller S-VIDEO-udgang til et tv, skal du sørge for at indstille vælgerne  
S-VIDEO AND VIDEO/RGB og COMP./RGB-Y/C på bagpanelet korrekt.  
Se side 13-15 i INSTRUKTIONSBOG.  
VIGTIGT!  
Bemærk, at vælgerindstillingen skal ændres, mens systemet er standset eller strømmen er slået fra (standby) og DVD-  
pladen er fjernet. Ellers bliver den ændrede indstilling ikke gyldig.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Insignia DVD Player NS SKPDVD User Manual
Insignia Handheld TV 10 0499 User Manual
Intel Computer Hardware BOXDB85FL User Manual
Jacuzzi Flat Panel Television LCD Series User Manual
JVC Stereo Receiver RX 5030VBK User Manual
Kenmore Refrigerator 795775626 User Manual
Kettler Baby Gym 07975 160 User Manual
KitchenAid Clothes Dryer KEYL507W User Manual
KitchenAid Pasta Maker SNFGA User Manual
Koss Headphones HB79S User Manual