User Guide
7" Portable Digital TV
NS-L7HTV-10A
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
About conserving battery power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Basic steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
TV components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Making connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Charging the built-in, rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . 6
Connecting a standard video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Understanding the basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Turning your TV on or off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Selecting a radio station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Using the electronic program guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Adjusting the picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Adjusting the sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Changing channel settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Selecting the TV signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Automatically scanning for TV channels using the antenna . . . . . . .12
Automatically scanning for channels using cable TV . . . . . . . . . . . . . .13
Hiding TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting up the favorite channel list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Adding a channel label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using closed captioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting time settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Adjusting menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Adjusting radio options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Automatically scanning for radio stations . . . . . . . . . . . . . . . . . . . . . . . . 18
Changing radio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Two-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
• When connecting with an automobile
(cigarette lighter) adapter, make sure that the
input voltage of the adapter is identical with
the car voltage.
• Unplug the AC adapter from the outlet when
the TV will not be used for an extended period
of time.
• Hold the plug while unplugging the AC
adapter. Do not pull on the power cord.
• Using headphones:
Important safety
instructions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
• To avoid hearing damage caused by a sudden
increase in volume, keep the volume at the
lowest level before playback, then adjust it to
a comfortable level.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within your TV. This
label is located on the back of your TV.
• Keep the volume at a moderate level to
This symbol indicates that there are
important operating and maintenance
instructions in the literature
protect your ears.
• To avoid trac accidents, never wear
headphones when driving a car or riding a
motorcycle or bicycle.
accompanying your TV.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
16 The apparatus shall not be exposed to dripping
or splashing, and no objects filled with liquids,
such as vases, shall be placed on the apparatus.
Warnings
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
Electric shock hazard
To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside. Refer
servicing to qualified service technicians.
Lightning
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from
lightning and power line surges.
9 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
10 Only use attachments/accessories specified by
Power lines
the manufacturer.
An outside antenna system should not be located in
the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
outside antenna system, extreme care should be
taken to keep from touching such power lines or
circuits as contact with them might be fatal.
11 Unplug this apparatus during lightning storms
or when unused for long periods of time.
12 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Handling the LCD panel
• Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
• If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel. This
may cause skin inflammation.
• If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also, if
the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
13 Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like.
14 This TV operates on an AC power adapter, car
adapter, or built-in rechargeable battery.
15 Make sure that the input voltage of the AC
adapter is compatible with the local voltage.
Otherwise, the AC adapter and the TV may be
damaged.
Warning
To avoid electric shock, do not touch the AC adapter
with wet hands.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Replacement parts
When replacement parts are required, make sure
1
2
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock,
personal injury, or other hazards.
3
4
Safety check
5
6
After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
7
1
2
3
4
5
6
7
Antenna lead-in wire
Grounding clamp
Power source
Antenna discharge unit
Grounding conductors
Ground clamps
Operate your TV only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supplied to your home, consult
an electrician or your local power company.
Power service grounding electrode system
Electric service equipment
Cautions
Damage requiring service
Unplug this TV from the power outlet and refer
servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged
or frayed.
Note to CATV system installer
Article 820 of the National Electrical Code,
ANSI/NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding
system of the building as close to the point of cable
entry as practical.
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls that are covered by the operating
instructions because incorrect adjustment of
other controls may result in damage and will
often require extensive work by a qualified
technician to restore your TV to its normal
operation.
Condensation
Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired. To
prevent this, let the TV stand in its new
surroundings for about an hour before switching it
on, or make sure that the room temperature rises
gradually.
Condensation may also form during the summer if
the TV is exposed to the breeze from an air
conditioner. In such cases, change the location of
the TV.
• If your TV has been dropped or damaged in any
way.
• When your TV exhibits a distinct change in
performance.
Outdoor antenna grounding
If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
Mobile telephone warning
To avoid interference with your TV picture and
sound, operating problems, or even damage, keep
your cordless and cellular telephones away from
the TV.
ANSI/NFPA No. 70, provides information with
respect to correct grounding of the mast and
supporting structure, grounding of the lead-in wire
to an antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
End of life directives
Your TV contains tin-lead solder and a fluorescent
lamp containing a small amount of mercury.
Disposal of these materials may be regulated for
environmental reasons. Your TV also contains
material that can be recycled and reused. For
disposal or recycling information, contact your local
authorities or the Electronic Industries Alliance at
requirements for the grounding electrode.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• If you know a local channel is available but you
cannot tune to the channel, try scanning for
channels again.
• If you see a blue screen, your TV is not receiving a
signal. Make sure that the antenna or cable TV
cable is connected securely and that your TV is in
a good area for reception.
Non-active pixels
The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp video
quality. Occasionally, a few non-active pixels may
appear on the screen as a fixed blue, green, or red
point. These non-active pixels do not adversely
affect the performance of your TV, and are not
considered defects.
About conserving battery power
Your TV has a built-in, rechargeable battery that can
most out of your battery:
• Fully charge the battery before you use your TV
for the first time. If you do not fully charge the
battery, the amount of time the charge lasts is
reduced.
Introduction
Congratulations on your purchase of a high-quality
Insignia product. Your NS-L7HTV-10A represents
the state of the art in LCD TV design and is designed
for reliable and trouble-free performance.
• When you charge the battery, always disconnect
the AC adapter when the charging is complete. If
you leave the AC adapter connected, you will
shorten the battery life.
Package contents
• 7" portable digital TV
• Remote control with battery installed
• AC adapter
Basic steps
• AV cable
• Car adapter
• User Guide
• Quick Setup Guide
power, fully charge the battery before you use
your TV for the first time. See Turning your TV on
or off” on page 8 and “Charging the built-in,
rechargeable battery” on page 6.
reception possible. If you are in a poor reception
area, you may need to unscrew the rod antenna
and connect an HDTV antenna to jack where the
rod antenna was connected. See “Connecting
an antenna, cable TV, or satellite TV” on page 7.
3 Make sure that TV is selected as the input
source. See “Selecting the input mode” on
page 8.
What you need to know
before you start
About reception
Your TV is designed to be portable. Because you will
probably be moving your TV from place to place,
you need to consider the following:
4 Press SCAN on the front of your TV to scan for
channels. See “Automatically scanning for TV
channels” on page 8. If you move your TV to a
different viewing area, you need to rescan for
channels. See “Automatically scanning for TV
channels using the antenna” on page 12 or
“Automatically scanning for channels using
cable TV” on page 13.
• Clear TV and radio reception depends on your
location.
• Make sure that you extend the rod antenna that
comes pre-installed on your TV. Rotate the
antenna to adjust the reception.
• If the rod antenna does not provide good
reception, you may need to connect an HDTV
antenna (such as “rabbit ears”) or cable or satellite
TV.
5 Tune to a channel to watch TV.
• If you scan for TV channels or radio stations when
your TV is experiencing poor reception, you may
not be able to tune to all the available channels or
stations.
About available TV channels and radio
stations
• When you use your TV for the first time, you need
to scan for TV channels and radio stations in your
area.
• Your TV remembers the channel and station
information from the last scan and tries to tune to
the stored channels and stations. When you move
your TV to a different area, make sure that you
scan for TV channels and radio stations before you
try to tune to channels or stations.
• Make sure that your TV has good reception before
you scan for channels or stations. Poor reception
during a scan prevents your TV from finding all
the available TV channels and radio stations.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Sides
TV components
Right
Left
Front
#
Item
Description
1
VOLUME control
FOR SERVICE ONLY
VIDEO IN jack
Rotate to adjust the volume.
Do not use.
2
3
4
5
6
Connect a standard video device to this jack.
PHONE 1 and 2 jacks Connect headphones to these jacks.
DC IN 9V
Connect the AC adapter to this jack.
Slide to turn your TV on or off.
POWER switch
#
Button
MENU
Description
Lights blue when your TV is turned on.
Lights red when the built-in battery is charging.
POWER ON/CHG
indicator
7
1
Press to open the on-screen menu.
Press to go to the next channel in the channel list. For
more information, see “Selecting a TV channel” on
page 9.
2
CH+
3
4
TV/FM
SCAN
Press to switch between TV and radio.
Press to open the auto scan screen.
Press
or to select an option and to adjust
5
settings in the on-screen menu. Press to OK confirm
and OK
selections in on-screen menus.
Press to go to the previous channel in the channel list.
For more information, see “Selecting a TV channel” on
page 9.
6
7
CH–
VIDEO
Press to switch to the video source.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Back
#
Button
Description
1
Numbers
Press to enter channel numbers.
Press to the DTV electronic program guide. For more
information, see “Using the electronic program guide”
on page 10.
2
3
GUIDE
Press to access a menu or confirm selections in the
on-screen menu.
OK/ENTER
Press to display information about the video input
source.
4
5
6
INFO
MENU
ZOOM
Press to open the on-screen menu.
Press to select the aspect ratio. You can select Wide,
Zoom, Cinema, or Normal.
Press to select the picture mode. You can select Vivid,
Theater, Personal, or Standard.
7
8
PICTURE
FM
Press to switch to radio mode.
Press to select the video input mode. For more
information, see “Selecting the input mode” on
page 8.
#
Item
Description
9
INPUT
In TV mode, connect an antenna (either the included,
portable antenna or an external, fixed antenna) or the
cable from your cable or satellite TV to this jack.
In radio mode, connect an antenna to scan radio
stations.
10
11
RECALL
Press to go to the last viewed channel.
1
Antenna jack
Press to select digital sub-channels. For more
information, see “Selecting a TV channel” on page 9.
2
Stand
Open to support your TV in an upright position.
Press to go to the next channel in the channel list. For
more information, see “Selecting a TV channel” on
page 9.
12
13
14
CH+
Note
Press to select an option and to adjust settings in the
on-screen menu.
The supplied rod antenna comes already attached to
your TV. If you want to connect an external antenna,
you can detach the rod antenna and connect the
external antenna to the Antenna jack.
Your TV will perform best with an HDTV antenna,
which can be purchased separately.
Press to go to the previous channel in the channel list.
For more information, see “Selecting a TV channel” on
page 9.
CH–
CCD
Press to turn closed captioning on or off. For more
information, see “Using closed captioning” on
page 16.
15
Remote control
The remote control battery comes pre-installed.
16
17
EXIT
TV
Press to close the on-screen menu.
Press to switch to TV mode.
The first time you use the remote control, remove
the plastic sheet from the bottom of the battery to
activate the remote.
Press to open the favorite channel list. For more
information, see “Setting up the favorite channel list”
on page 14.
18
19
FAVORITE
VIDEO
Press to switch to video mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Replacing the remote control battery
Making connections
Note
The first time you use the remote control, remove the
plastic sheet from the bottom of the battery to
activate the remote.
Connecting the AC adapter:
1 Plug the AC adapter into the DC IN 9V jack on
the left side of your TV.
To replace the remote control battery:
1 Gently insert a fingernail in the grove marked 1,
then gently pull the battery holder in the
direction marked 2.
1
2
2 Remove the old battery.
3 Place the new battery in the holder with the +
facing up. Keep the holder horizontal so the
battery does not fall out.
2 Plug the other end of the AC adapter into a
power outlet.
Caution
Always turn off your TV before you unplug the AC adapter, or you
may damage your TV.
4 Slide the battery holder into the battery
compartment. Make sure that the holder is
inserted securely.
Connecting the car adapter
Cautions
To connect the car adapter:
1 Plug the car adapter into the DC IN 9V jack on
•
Batteries contain chemical substances, so they should
be disposed of correctly. Follow the hazardous waste
guidelines in you area.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Incorrect use of batteries can cause electrolyte leakage
and will corrode the compartment or cause the
batteries to burst.
the left side of your TV.
2 Plug the other end of the car adapter into the
•
•
cigarette lighter socket in your car.
Cautions
•
Always turn off your TV before you unplug the
car adapter, or you may damage your TV.
To avoid traffic accidents, never wear
headphones when driving a car or riding a
bicycle.
•
•
•
Do not touch the adapter with wet hands. Do
not get liquid on the adapter.
Never operate your TV or view programs while
operating an automobile or other vehicle.
Doing so is illegal in many jurisdictions.
Charging the built-in, rechargeable battery
The built-in battery needs to be fully charged
before you use it for the first time. The built-in
battery can power the TV for operation outdoors or
in a place with no outlets.
To charge the built-in, rechargeable battery:
1 Make sure that your TV is turned off. The battery
will not charge if your TV is on.
2 Connect the AC adapter or car adapter to the
DC IN 9V jack on the side of your TV and to a
power outlet or car cigarette lighter socket.
Battery charging begins automatically and the
POWER ON/CHG indicator lights red. When
charging is complete the indicator turns off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3 When charging is complete, disconnect the AC
Connecting a standard video device
adapter.
To connect a standard video device:
Caution
1 Make sure that your TV is turned off and the AC
Do not disconnect the AC adapter or car adapter until the
POWER ON/CHR indicator turns off.
adapter is unplugged.
2 Connect an AV cable between the VIDEO IN jack
on the right side of your TV and the AV OUT
jacks on the video device.
Notes
•
•
The battery indicator (
) appears on the screen
when the power is running low.
Charge the built-in, rechargeable battery with a
surrounding temperature of 41°F and 95°F
(5 and 35°C).
•
•
The built-in battery may get warm when you are
charging it or operating your TV. This is not defect.
Batteries contain chemical substances, so they should
be disposed of correctly. Follow the hazardous waste
guidelines in you area.
Connecting an antenna, cable TV, or
satellite TV
Note
If you are in an area with weak TV signals, you may
need an HDTV antenna to improve reception.
Unscrew the rod antenna, then connect an HDTV
antenna to this jack.
To connect an antenna, cable TV, or satellite TV:
1 Make sure that your TV is turned off and the AC
adapter is unplugged.
Standard video device
2 Connect a coaxial cable between the Antenna
jack on the back of your TV and an antenna,
cable TV, or satellite TV jack.
3 Turn on your TV, then press INPUT on the
remote control to open the Input Source list.
4 Press INPUT repeatedly or press or to select
VIDEO, then press OK/ENTER.
Note
You can also press VIDEO to select the video device.
HDTV antenna
3 Turn on your TV, then press INPUT on the
remote control to open the Input Source list.
4 Press INPUT repeatedly or press or to select
TV, then press OK/ENTER.
Note
You can also press TV to view TV.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Selecting the input mode
Understanding the basics
To select the input mode:
1 Press INPUT to open the Input Source list, then
press INPUT repeatedly or press or to select
an input source.
Turning your TV on or off
To turn your TV on or off:
• Slide the POWER switch.
Input Source
TV
VIDEO
RADIO
POWER switch
2 Press OK/ENTER.
POWER ON/CHG
indicator
Note
•
•
You can press TV to watch TV.
You can press VIDEO to select a connected
video device.
•
You can press FM to listen to the radio.
Automatically scanning for TV channels
You should scan for TV channels in your area. Your
TV stores the information in the channel list.
To automatically scan for TV channels:
POWER switch
position
POWER ON/CHG
indicator
1 Make sure that you have a TV antenna, cable TV,
Status
or satellite TV connected to your TV.
2 Press SCAN on the front of your TV. The
following screen opens.
On
Blue
Off
Off
Do you want to proceed auto scan?
Charging
Red
No
Yes
Note
Because your TV can be powered by the built-in,
rechargeable battery, there is no standby mode. Your
TV is either on or off.
Select OK:Confirm Menu:Exit
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press or to select Yes, then press OK/ENTER
to start the scan. If you do not want to scan for
channels, select No. A status screen appears
during the scan.
3 Press or to select Yes, then press OK/ENTER
to start the scan. If you do not want to scan for
radio stations, select No. A status screen appears
during the scan.
RF CH
Found
12
4
Favorite Stations
Frequency
3
96.30MHz
Menu/Exit: Exit
Menu/Exit: Exit
Your TV scans for channels in your area and
stores the information in the channel list. When
the scan is complete, your TV tunes to the first
channel in the channel list.
Your TV scans for radio stations in your area and
store the information in the radio station list.
When the scan is complete, your TV tunes to the
first station in the radio station list.
Note
Note
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete radio
station list.
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete radio
station list.
You can also scan for TV channels using the
on-screen channel menu. For more information, see
“Automatically scanning for TV channels using the
antenna” on page 12 or “Automatically scanning for
channels using cable TV” on page 13.
You can also scan for TV channels using the
on-screen channel menu. For more information, see
“Automatically scanning for TV channels using the
antenna” on page 12 or “Automatically scanning for
channels using cable TV” on page 13.
You can save up to 50 of your favorite radio stations.
Automatically scanning for radio stations
Adjusting a radio station’s frequency
To automatically scan for radio stations:
To adjust a radio station’s frequency:
1 Make sure that you have the rod antenna
connected to your TV.
1 Make sure that you have scanned for radio
stations.
2 Press SCAN on the front of your TV. The
following screen opens.
2 Tune to a radio station, then press or to
adjust the station frequency. Each time you
press or , the frequency moves 0.1 MHz.
Your TV automatically saves the latest selected
frequency.
Do you want to proceed auto scan?
Selecting a TV channel
To select a TV channel:
• To go to the next or previous channel in the
channel list, press CH+ and CH–. Pressing one
of these buttons skips any channels that are
not in the channel list. The channel list was
created when you scanned for channels.
No
Yes
• To select an analog or main digital channel,
press the number buttons for the channel.
Select OK:Confirm Menu:Exit
• To select a digital sub-channel, press the
number buttons for the main digital channel,
press , then press the number for the digital
sub-channel.
• To tune to the last viewed channel, press
RECALL.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Selecting a radio station
Adjusting the picture
To select a radio station:
• Press CH+ and CH–. Pressing one of these
To adjust the picture:
buttons skips any radio stations that are not in
the radio channel list. The radio station list was
created when you scanned for radio stations.
1 Press MENU, then press or to highlight
(picture icon). The picture menu opens.
TV mode
Adjusting the volume
To adjust the volume:
• Rotate the
VOLUME control on the
right side of your TV.
Picture Mode
Vivid
Displaying additional information
55
45
55
0
Contrast
Brightness
Sharpness
Tint
You can view current status information about TV
channels.
Note
The following task shows an example of information
about a digital TV channel.
Color
55
Select
OK:Enter
Menu:Exit
To display additional information:
1 In digital TV mode, tune to a channel you want
to watch.
2 Press INFO. Program information appears (if
Video mode
available).
8.2
WFAA-SD
WFAA XPress 8.2
480 AUDIO 1/1(L+R)
2004/11/15 14:41 13:00-21:59
704
×
Good
Picture Mode
Vivid
55
Contrast
Brightness
Sharpness
Tint
45
55
0
No Event Information
Color
65
3 Press INFO again to close the display.
Select
OK:Enter
Menu:Exit
Using the electronic program guide
Your TV has an electronic program guide (EPG) that
supplies information such as program lists and
programs times. In addition, detailed information
about the program is often available in the EPG.
(The availability and the amount of program details
will vary depending on the broadcaster.)
2 Press OK/ENTER or to access the menu.
3 Press or to highlight a setting, then press
or to adjust the setting. You can adjust:
• Picture Mode—Selects the picture mode. You
can select Vivid, Theater, Personal or
Standard.
To use the EPG:
1 In digital TV mode, tune to a channel you want
• Contrast—Adjusts the contrast.
• Brightness—Adjusts the brightness.
• Sharpness—Adjusts the sharpness.
• Tint—Adjusts the tint.
to watch.
2 Press GUIDE. The EPG opens.
8.2
WFAA-SD
WFAA XPress 8.2
11/15 13:00 21:59
• Color—Adjusts the color.
-
:Next
Null
4 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Note
If you adjust Contrast, Brightness, Sharpness, Tint,
or Color, your TV automatically changes the Picture
Mode to Personal.
3 Press or to view information about future
programs on the selected channel.
4 Press or to select the previous or next
channel.
5 Press GUIDE to close the EPG.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press or to highlight a setting, then press
Adjusting the sound
or to adjust the setting. You can adjust:
• Balance—Adjusts the balance between the
left and right audio channels.
• Audio Language (DTV channels only)—
Selects the audio language (if multiple
languages are available). You can select
English, French, or Spanish.
To adjust the sound:
1 Press MENU, then press or to highlight
(sound icon). The sound menu opens.
TV mode
• MTS/SAP (Analog TV only)—You can select
Mono, Stereo, or SAP.
4 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Balance
0
0
0
Audio Language
English
Changing channel settings
Selecting the TV signal source
To select the TV signal source:
1 Press MENU, then press or to highlight
(TV mode icon). The channel menu opens.
Select
OK:Enter
Menu:Exit
Video mode
Antenna/Cable
Antenna
Auto Channel Search
Add/Skip Channels
Favorites
Balance
8.2
Channel No.
Audio Language
English
Channel Label
WFAA-SD
Menu:Exit
Select
OK:Enter
2 Press OK/ENTER or to access the menu.
Select
OK:Enter
Menu:Exit
Radio mode
Antenna/Cable
Antenna
8.2
Auto Channel Search
Add/Skip Channels
Favorites
Balance
Channel No.
Audio Language
English
Channel Label
WFAA-SD
Select
Adjust
Menu:Return
3 Press or to highlight Antenna/Cable, then
press or to select Antenna (VHF and UHF
channels) or Cable (cable or satellite TV
channels).
Select
OK:Enter
Menu:Exit
4 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
2 Press OK/ENTER or to access the menu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
4 Press or to highlight Auto Channel Search,
then press OK/ENTER or . The following
Automatically scanning for TV channels using
the antenna
screen opens with Start to Scan highlighted.
When you scan for channels, your TV searches for
channels available in your viewing area and stores
the channel information in the channel list. When
you press CH+ and CH–, your TV tunes to the next
or previous channel in the channel list and skips any
channels that were not stored in the list.
Cable System
Start to Scan
AUTO
To automatically scan for TV channels using the
antenna:
1 Make sure that you have selected the TV signal
source. For more information, see “Selecting the
TV signal source” on page 11.
2 Press MENU, then press or to highlight
(TV mode icon). The channel menu opens.
Select
Adjust
Menu:Return
5 Press OK/ENTER or to start scanning. A
progress screen appears.
Antenna/Cable
Antenna
Auto Channel Search
Add/Skip Channels
Favorites
8.2
Channel No.
Channel Label
RF CH
Found
12
4
WFAA-SD
Menu:Exit
Select
OK:Enter
3 Press OK/ENTER or to access the menu.
Menu/Exit: Exit
Your TV scans for analog and digital channels
and stores the information in the channel list.
When the scan is complete, your TV tunes to the
first channel in the channel list.
Antenna/Cable
Antenna
8.2
Auto Channel Search
Add/Skip Channels
Favorites
Channel No.
Channel Label
Note
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete
channel list.
WFAA-SD
Select
Adjust
Menu:Return
12
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press or to select the cable system you use
(AUTO, STD, IRC, or HRC). If you are not sure,
select AUTO.
6 Press or to highlight Start to Scan, then
press OK/ENTER or to start scanning. A
progress screen appears.
Automatically scanning for channels using
cable TV
To automatically scan for channels using
cable TV:
1 Make sure that you have selected the TV signal
source. For more information, see “Selecting the
TV signal source” on page 11.
2 Press MENU, then press or to highlight
(TV mode icon). The channel menu opens.
RF CH
Found
12
4
Antenna/Cable
Cable
Auto Channel Search
Add/Skip Channels
Favorites
Menu/Exit: Exit
80.3
Channel No.
Channel Label
PBS1DTV
Menu:Exit
Your TV scans for analog and digital channels
and stores the information in the channel list.
When the scan is complete, your TV tunes to the
first channel in the channel list.
Select
OK:Enter
3 Press OK/ENTER or to access the menu.
Note
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete
channel list.
Hiding TV channels
Antenna/Cable
Cable
8.2
You can hide TV channels in the channel list. When
you press CH+ or CH–, your TV skips hidden
channels. You can still tune to hidden channels
using the number buttons.
Auto Channel Search
Add/Skip Channels
Favorites
Channel No.
Channel Label
To hide TV channels:
1 Make sure that you have scanned for TV
channels. For more information, see
“Automatically scanning for TV channels using
the antenna” on page 11 or “Automatically
scanning for channels using cable TV” on
page 12.
WFAA-SD
Menu:Return
Select
Adjust
4 Press or to highlight Auto Channel Search,
then press OK/ENTER or . The following
2 Press MENU, then press or to highlight
(TV mode icon). The channel menu opens.
screen opens with Cable System highlighted.
Antenna/Cable
Cable
Cable System
Start to Scan
AUTO
Auto Channel Search
Add/Skip Channels
Favorites
80.3
Channel No.
Channel Label
PBS1DTV
Menu:Exit
Select
OK:Enter
Select
Adjust
Menu:Return
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
3 Press OK/ENTER or to access the menu.
Setting up the favorite channel list
You can create a favorite channel list to make it
easier to tune to your favorite channels.
To set up the favorite channel list:
1 Press MENU, then press or to highlight
Antenna/Cable
Cable
80.3
(TV mode icon). The channel menu opens.
Auto Channel Search
Add/Skip Channels
Favorites
Channel No.
Channel Label
Antenna/Cable
Cable
PBS1DTV
Menu:Return
Auto Channel Search
Add/Skip Channels
Favorites
Select
Adjust
80.3
Channel No.
Channel Label
4 Press or to highlight Add/Skip Channels,
then press OK/ENTER or . The following
screen appears.
PBS1DTV
Menu:Exit
Select
OK:Enter
2 Press OK/ENTER or to access the menu.
No.
Program Name
Show
80.3
80.4
80.5
80.6
80.7
80.8
PBS1DTV
PBS2DTV
PBS3DTV
PBS4DTV
PBS5DTV
V
V
V
V
V
V
Antenna/Cable
Cable
80.3
Auto Channel Search
Add/Skip Channels
Favorites
PBS6DTV
OK:Select Menu:Return
Channel No.
Channel Label
PBS1DTV
Menu:Return
5 Press or to highlight the channel you want
to hide, then press OK/ENTER. If the channel list
has more than one page, press or to scroll
through the pages.
Select
Adjust
If the channel has a check mark next to it, the
channel is in the channel list. If you delete a
channel, the check mark disappears. If you add a
channel, a check mark appears.
3 Press or to highlight Favorites, then press
OK/ENTER or . The following screen appears.
6 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
No.
Program Name
Favorite
80.3
80.4
80.5
80.6
80.7
80.8
PBS1DTV
PBS2DTV
PBS3DTV
PBS4DTV
PBS5DTV
PBS6DTV
OK:Select Menu:Return
14
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press or to highlight a channel you want to
add to the favorite channel list, then press
OK/ENTER. If the favorite channel list has more
than one page, press or to scroll through
the pages.
2 Press or to highlight a channel. If the list has
more than one page, press or to scroll
through the pages.
3 Press FAVORITE to close the list and tune to the
channel you selected.
A check mark appears next to the channel and
the channel is added to the favorite channel list.
Adding a channel label
You can add a label to a channel to make it easier to
identify.
To add a channel label:
1 Tune to a channel you want to label.
No.
Program Name
Favorite
2 Press MENU, then press or to highlight
80.3
80.4
80.5
80.6
80.7
80.8
PBS1DTV
PBS2DTV
PBS3DTV
PBS4DTV
PBS5DTV
V
V
V
V
V
V
(TV mode icon). The channel menu opens.
PBS6DTV
Antenna/Cable
Cable
OK:Select Menu:Return
Auto Channel Search
Add/Skip Channels
Favorites
Note
80.3
Channel No.
Channel Label
•
•
Channels that were skipped when you scanned
for channels are greyed in the list and cannot be
selected.
If you have added a label to a channel, the
channel label appears next to the channel
number in the favorite channel list. For more
information, see “Adding a channel label” on
page 15.
PBS1DTV
Menu:Exit
Select
OK:Enter
3 Press OK/ENTER or to access the menu.
5 Repeat Step 4 to add additional channels to the
list.
6 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Antenna/Cable
Cable
80.3
Note
Auto Channel Search
Add/Skip Channels
Favorites
Channel No.
Channel Label
To delete a channel from the favorite channel list,
repeat this task. In Step 4, when you select a channel
that has a check mark next to it and press OK/ENTER,
the channel is deleted from the list.
To select a favorite channel:
PBS1DTV
Menu:Return
1 Press FAVORITE one or more times until the
Favorite List opens.
Select
Adjust
Favorite List
4 Press or to highlight Channel Label, then
press OK/ENTER or . The following screen
appears.
80.3
80.4
80.5
80.6
80.7
80.8
PBS1DTV
PBS2DTV
PBS3DTV
PBS4DTV
PBS5DTV
PBS6DTV
P
B
S
1
D
T
V
Select
Adjust
Menu:Return
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
5 Press or to move from character to
character and press or one or more times to
select a character. You can use as many as seven
characters.
6 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
4 Press or to highlight a setting, then press
or to adjust the setting. You can select:
• CC Mode—Turns closed captioning on or off.
• Basic—Selects the closed captioning mode.
You can select Off, CC1 through CC4, or Text1
through Text4.
• Advanced—(DTV only) Select the DTV closed
captioning mode. You can select Off or
Service1 through Service6.
Using closed captioning
5 Press MENU one or more times to return to the
To use closed captioning:
previous menu or press EXIT to close the menu.
1 Press MENU, then press or to highlight
(settings icon). The settings menu opens.
Adjusting time settings
To adjust time settings:
1 Press MENU, then press or to highlight
(settings icon). The settings menu opens.
Menu Language
English
Color Temperature
Aspect Ratio
Time
Closed Caption
Reset to Factory
Cool
Wide
Menu Language
English
Color Temperature
Aspect Ratio
Time
Cool
Wide
Select
OK:Enter
Menu:Exit
Closed Caption
Reset to Factory
2 Press OK/ENTER or to access the menu.
Select
OK:Enter
Menu:Exit
2 Press OK/ENTER or to access the menu.
Menu Language
English
Color Temperature
Aspect Ratio
Time
Closed Caption
Reset to Factory
Cool
Wide
Menu Language
English
Color Temperature
Aspect Ratio
Time
Cool
Wide
Select
Adjust
Menu:Return
Closed Caption
Reset to Factory
3 Press or to highlight Closed Caption, then
press OK/ENTER or . The following screen
appears.
Select
Adjust
Menu:Return
CC Mode
Off
Basic
CC1
Advanced
Service1
Select
Adjust
Menu:Return
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press or to highlight Time, then press
OK/ENTER or . The following screen appears.
Video mode
Menu Language
English
OSD Duration
30 Sec
Color Temperature
Aspect Ratio
Time
Closed Caption
Reset to Factory
Cool
Wide
Time Zone
Daylight Savings
Clock
Pacific
Off
2009/05/10 08:30
Select
OK:Enter
Menu:Exit
Select
Adjust
Menu:Return
Radio mode
4 Press or to highlight a setting, then press
or to adjust the setting. You can select:
• OSD Duration—Sets the amount of time the
OSD remains open when no buttons are
pressed.
• Time Zone—Selects the time zone. You can
select Pacific, Alaska, Hawaii, Atlantic,
Eastern, Central, or Mountain.
Menu Language
English
Color Temperature
Aspect Ratio
Time
Cool
Wide
• Daylight Savings—Turns the daylight saving
feature on or off.
• Clock—Displays the date and time. The Clock
option only displays the time when your TV is
tuned to a digital channel and time
information is available.
Closed Caption
Reset to Factory
Select
OK:Enter
Menu:Exit
5 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Note
2 Press OK/ENTER or to access the menu.
If a power failure occurs or the TV is unplugged, all
the times are reset.
3 Press or to highlight a setting, then press
or to adjust the setting. You can adjust:
• Menu Language—Select the menu language.
Adjusting menu settings
You can select English, Français, or Español.
• Color Temperature—Sets the color
temperature. You can select Cool, Normal or
Warm.
• Aspect Ratio—Selects the aspect ratio. You
can select Wide, Zoom, Cinema, or Normal.
• Time—For more information, see “Adjusting
time settings” on page 16.
To adjust menu settings:
1 Press MENU, then press or to highlight
(settings icon). The settings menu opens.
TV mode
• Closed Caption—For more information, see
“Using closed captioning” on page 16.
• Reset to Factory—Resets all settings to the
factory defaults. Select Yes, then press
OK/ENTER.
Menu Language
English
Color Temperature
Aspect Ratio
Time
Cool
Wide
4 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Closed Caption
Reset to Factory
Select
OK:Enter
Menu:Exit
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Your TV scans for radio stations in your area and
store the information in the radio station list.
When the scan is complete, your TV tunes to the
first station in the radio station list.
Adjusting radio options
Automatically scanning for radio stations
Note
You should scan for radio stations in your area. Your
TV stores the information in the radio station list.
You can press MENU or EXIT to stop the scan.
To automatically scan for radio stations:
Changing radio settings
1 Press MENU, then press or to highlight
(radio icon). The radio menu opens.
To change radio settings:
1 Press MENU, then press or to highlight
(radio icon). The radio menu opens.
Auto Channel Search
1
Favorite Stations
Frequency
Fine Tune
Auto Channel Search
87.5MHz
1
Favorite Stations
Frequency
Fine Tune
0
87.5MHz
Off
Audio Only
0
Off
Audio Only
Select
OK:Enter
Menu:Exit
Select
OK:Enter
Menu:Exit
2 Press OK/ENTER or to access the menu. Auto
Channel Search is highlighted.
2 Press OK/ENTER or to access the menu.
Auto Channel Search
Auto Channel Search
1
Favorite Stations
Frequency
Fine Tune
1
Favorite Stations
Frequency
87.5MHz
87.5MHz
0
0
Fine Tune
Audio Only
Off
Audio Only
Off
Select
Adjust
Menu:Return
Select
Adjust
Menu:Return
3 Press OK/ENTER or to start scanning. A
progress screen appears.
3 Press or to highlight a setting, then press
or to adjust the setting. You can adjust:
• Auto Channel Search—For more information,
see “Automatically scanning for radio stations”
on page 9.
• Favorite Stations—Press or to select the
favorite stations you want. You can save up 50
of your favorite radio stations.
• Frequency—Press or to adjust the station
frequency. Press or to move 0.1 MHz.
Favorite Stations
Frequency
3
96.30MHz
• Fine Tune—Press or to fine-tune the
station.
• Audio Only—Select On or Off. If you select
On, the display is turned off. Press any button
to turn the display back on.
Menu/Exit: Exit
18
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press MENU one or more times to return to the
previous menu or press EXIT to close the menu.
Specifications
Note
Design and specifications are subject to change
without notice.
The Audio Only function becomes active about
three seconds after the TV menu closes.
Weight and dimensions shown are approximate
values only.
Troubleshooting
LCD panel
Dimensions
Weight
7-inch LCD screen
8.5 × 6.3 × 1.5 in. (21.5 × 16 × 3.9 cm)
1.8 lbs (0.8 kg)
Problem
Solution
•
•
Make sure that your TV is turned
on.
TV standard
ATSC/NTSC
You may not be getting a signal.
Follow the advice on page 3.
Remember to run the channel scan,
if you haven’t done so already.
No picture or sound
Input: DC 9V 1.8A
Consumption: 10 W (max.)
Power source
Video (composite)
F type antenna in
Headphones (mini jack) × 2
Picture is OK, but there is no sound
Sound is OK, but there is no color
•
•
Increase the volume.
Inputs/outputs
Check the program’s color features.
The broadcast may be in black and
white.
Adjust the color. For more
information, see “Adjusting the
picture” on page 10.
Operating temperature 41° ~ 95°F(5° ~ 35°C)
•
•
Legal notices
Make sure that the antenna is
installed correctly. If not, adjust the
antenna towards the broadcasting
station.
FCC Part 15
Picture has overlapped images
Picture has snow
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
•
•
The picture will have snow if the
broadcast is analog and the signal
is weak.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
Check for interference from other
electronic devices, such as radios
and televisions. Keep magnetic or
electronic devices away from your
TV.
Stripes on picture
•
•
You are not getting a strong
enough signal. Try moving the
antenna to another location or
using a stronger antenna.
Picture is pixellated and jumpy
Remote control does not work
Remove obstacles between the
remote control and your TV.
Install fresh batteries.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
•
•
If TV is selected as the input
source, make sure that the antenna
or cable TV is firmly connected.
If VIDEO is selected as the input
source, make sure that the AV cable
is firmly connected to your TV.
Reception may be poor. To improve
reception, Follow the advice on
page 3.
•
•
•
•
“No Signal” appears on the screen
Picture has a few bright or dark spots
FCC warning
Changes or modifications not expressly approved by the party
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
DHHS and FDA safety certification
•
A few bright or dark dots on an LCD
screen are normal. It does not
affect the operation of your TV.
This product is made and tested to meet safety standards of the
FCC, requirements and compliance with safety performance of
the U.S. Department of Health and Human Services, and also
with FDA Radiation Performance Standards 21 CFR Subchapter J.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
Standard Television Receiving Apparatus — Appareil de
réception télévision ordinaire, Canada BETS-7 / NTMR-7
RSS 310 statement
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than
that permitted for successful communication.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
Macrovision statement
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
This warranty also does not cover:
Two-year limited warranty
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been
altered or removed
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new NS-L7HTV-10A (“Product”), that the
Product shall be free of defects in the original manufacture of the
material or workmanship for a period of two (2) years from the
date of your purchase of the Product (“Warranty Period”). This
Product must be purchased from an authorized dealer of
Insignia brand products and packaged with this warranty
statement. This warranty does not cover refurbished Product. If
you notify Insignia during the Warranty Period of a defect
covered by this warranty that requires service, terms of this
warranty apply.
•
•
•
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
How long does the coverage last?
The Warranty Period lasts for 2 years (730 days) from the date
you purchased the Product. The purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
Contact Insignia:
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
© 2010 BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc.
Registered in some countries. All other products and brand
names are trademarks of their respective owners.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
•
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-L7HTV
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TM
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2010 Best BBY Solutions, Inc.
All rights reserved. INSIGNIA is a trademark of BBY Solutions, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
10-0499
Download from Www.Somanuals.com. All Manuals Search And Download.
|