DVD PLAYER &
VIDEO CASSETTE RECORDER
HR-XVC18BUS
HR-XVC19SUS
INSTRUCTIONS
LPT1086-001A
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION:
PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANU-
AL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS BOOKLET FOR FUTURE REFER-
ENCE.
This product has been designed and manufactured to assure personal safety. Improper use can result in electric
shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following proce-
dures for installation, use, and servicing.
This product does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO DANGEROUS VOLTAGE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY.
1. Read these instructions. - All these safety and
operating instructions should be read before the
product is operated.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the product.
2. Keep these instructions. - The safety, operating
and use instructions should be retained for future ref-
erence.
11. Only use attachments/accessories specified by
the manufacturer.
3. Heed all warnings. - All warnings on the product
and in the operating instructions should be adhered
to.
4. Follow all instructions. - All operating and use
instructions should be followed.
5. Do not use this product near water. – For exam-
ple: near a bath tub, wash bowl, kitchen sink, laundry
tub, in a wet basement; or near a swimming pool;
and other areas located near water.
6. Clean only with dry cloth. – Unplug this product
from the wall outlet before cleaning. Do not use liquid
cleaners.
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold
with apparatus. When a cart is used, use cau-
tion when moving the cart/product combination
to avoid injury from tip-over.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions. -
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over- heating. The
openings should never be blocked by placing the
product on a bed, sofa, rug or other similar surface.
This product should not be placed in a built-in instal-
lation such as a bookcase or rack unless proper ven-
tilation is provided or the manufacturer’s instructions
have been adhered to.
13. Unplug this product during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service person-
nel. Servicing is required when the product has
been damaged in any way, such as power-sup-
ply cord or plug is damaged, liquid has been
spilled or objects have fallen into the product,
the product has been exposed to rain or mois-
ture, does not operate normally, or has been
dropped.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A ground-
ing type plug has two blades and a third ground-
ing prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Tape Recording . . . . . . . . . . . . .22-25
Basic Instructions . . . . . . . . . . . . . . . . . . .22
Timer Recording . . . . . . . . . . . . . . . .22-23
Instant Timer Recording . . . . . . . . . . . . .24
Recording from External Components . .24
Copying from DVD to VCR . . . . . . . . . . .25
On-Screen Display - VCR . . . . . . . . . . . .25
Additional VCR Information . . . . . . . . . . .26
VCR Auto Play System . . . . . . . . . . . . . .26
S-VHS Quasi Playback (SQPB) . . . . . . .26
Easy Information . . . . . . . . . . . . . . . . . . .26
Playing a DVD or Video CD . . . . . . . . .27-29
Playback Setup . . . . . . . . . . . . . . . . . . . .27
General Features . . . . . . . . . . . . . . . .27-29
• Moving to another TITLE . . . . . . . . . .27
• Moving to another CHAPTER . . . . . .27
• Slow Motion . . . . . . . . . . . . . . . . . . . . .27
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Moisture Condensation . . . . . . . . . . . . . . .5
Symbols Used in this Manual . . . . . . . . . .5
About the Symbol Display . . . . . . . . . . .5
Notes on Discs . . . . . . . . . . . . . . . . . . . . . .5
Types of Playable Discs . . . . . . . . . . . . . .6
Disc-related terms . . . . . . . . . . . . . . . . . . .6
Regional Code . . . . . . . . . . . . . . . . . . . . . . .7
Notes on Regional Codes . . . . . . . . . . . . . .7
Notes on Copyrights . . . . . . . . . . . . . . . . . .7
Notice for Progressive Scan Use . . . . . . . .7
About the Remote Control . . . . . . . . . . . . .7
Selecting the Viewing Source . . . . . . . . . .7
Front Panel . . . . . . . . . . . . . . . . . . . . . . . . .8
Remote Control . . . . . . . . . . . . . . . . . . . . . .9
Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . .10
•
Still Picture and Frame-by-Frame Playback . .28
• Search . . . . . . . . . . . . . . . . . . . . . . . . .28
• Time Search . . . . . . . . . . . . . . . . . . . .28
• Marker Search . . . . . . . . . . . . . . . . . . .28
• Repeat . . . . . . . . . . . . . . . . . . . . . . . . .28
• Repeat A-B . . . . . . . . . . . . . . . . . . . . .28
• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . .28
• Changing the Audio Channel . . . . . . .29
• Last Scene Memory . . . . . . . . . . . . . .29
• Screen Saver . . . . . . . . . . . . . . . . . . .29
Special DVD Features . . . . . . . . . . . . . .29
• Checking the contents of DVD discs:
Preparation . . . . . . . . . . . . . . . . . . . .10
Connecting an Antenna or Cable TV . . . .11
Basic TV Connections . . . . . . . . . . . .11-12
Optional TV Connections . . . . . . . . . . . .12
Audio Connection for DVD . . . . . . . . .12-13
Initial Settings - VCR . . . . . . . . . . . . . .14-15
General Operation . . . . . . . . . . . . . . . . .14
CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . .14
• Auto Clock Set . . . . . . . . . . . . . . . . . .14
• Manual Clock Set . . . . . . . . . . . . . . . .14
PROGRAM . . . . . . . . . . . . . . . . . . . . . . .14
TUNING . . . . . . . . . . . . . . . . . . . . . . . . .15
• Auto Channel Programming . . . . . . . .15
• To Add or Erase Channels . . . . . . . . .15
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . .15
• FUNCTION OSD . . . . . . . . . . . . . . . .15
• AUDIO MODE . . . . . . . . . . . . . . . . . .15
• BROADCAST TYPE
Menus . . . . . . . . . . . . . . . . . . . . . . . . .29
• Title Menu . . . . . . . . . . . . . . . . . . . . .29
• Disc Menu . . . . . . . . . . . . . . . . . . . . .29
• Camera Angle
. . . . . . . . . . . . . . . . .29
• Changing the Audio Language . . . . . .29
• Subtitles . . . . . . . . . . . . . . . . . . . . . .29
On-Screen Display - DVD . . . . . . . . . . . .30
Maintenance and Service . . . . . . . . . . . . .30
Playing an Audio CD Disc . . . . . . . . . . . .31
Audio CD Disc Features . . . . . . . . . . . . . .31
• Pause . . . . . . . . . . . . . . . . . . . . . . . .31
(STEREO / SAP / MONO) . . . . . . . . . .15
• AUDIO OUTPUT
(STEREO / LEFT / RIGHT) . . . . . . . .15
Initial Settings - DVD . . . . . . . . . . . . . .16-19
General Operation . . . . . . . . . . . . . . . . .16
LANGUAGE . . . . . . . . . . . . . . . . . . . . . .16
DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .17
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . .18
OTHERS . . . . . . . . . . . . . . . . . . . . . . . . .19
• Moving to another Track
. . . . . . . . .31
• Repeat Track / All / Off . . . . . . . . . . . .31
• Search . . . . . . . . . . . . . . . . . . . . . . . . .32
• Random . . . . . . . . . . . . . . . . . . . . . . . .32
• Repeat A-B . . . . . . . . . . . . . . . . . . . . .32
Programmed Playback . . . . . . . . . . . . . .32
Viewing a JPEG Disc . . . . . . . . . . . . . . .34
Slide Show . . . . . . . . . . . . . . . . . . . . . . .34
Still Picture . . . . . . . . . . . . . . . . . . . . . . . .34
Moving to another File . . . . . . . . . . . . . .34
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
To rotate picture . . . . . . . . . . . . . . . . . . . .34
Operation . . . . . . . . . . . . . . . . . . . . .20
VCR Tape Playback . . . . . . . . . . . . . .20-21
Basic Instructions . . . . . . . . . . . . . . . . . . .20
Auto Tracking . . . . . . . . . . . . . . . . . . . . . .20
Manual Tracking . . . . . . . . . . . . . . . . . . .20
Search . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Still Picture and Frame-by-Frame Playback . .20
Slow Motion . . . . . . . . . . . . . . . . . . . . . . .21
CM SKIP (Commercial Skip) . . . . . . . . . .21
VHS Hi-Fi Stereo / MTS Broadcast . . . . .21
Hi-Fi Stereo Audio Sound . . . . . . . . . . . .21
MTS (Multi-Channel TV Sound) . . . . . . . .21
Reference . . . . . . . . . . . . . . . . . . . . .35
Language Codes . . . . . . . . . . . . . . . . . . . .35
Area Codes . . . . . . . . . . . . . . . . . . . . . . . .35
Troubleshooting . . . . . . . . . . . . . . . . .36-37
Specifications . . . . . . . . . . . . . . . . . . . . . .38
Warranty (Only in U.S.A.) . . . . . . . . . . . . .39
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
To ensure proper use of this product, please read
this owner’s manual carefully and retain for future
reference.
About the Symbol Display
“
” may appear on your TV display during oper-
ation and indicates that the function is not permit-
ted by this unit or the disc or not available at that
time.
This manual provides information on the operation
and maintenance of your DVD+VCR. Should the
unit require service, contact an Authorized Service
Center.
Notes on Discs
Handling Discs
Moisture Condensation
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on
the disc.
Never operate the DVD+VCR immediately after
moving it from a cold location to a warm location.
Leave it unplugged for two or three hours without
operating it.
If you use the DVD+VCR in such a situation, it
may damage discs/tapes and internal parts.
Symbols Used in this Manual
Indicates hazards likely to cause harm to
the unit itself or other material damage.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of
heat and never leave it in a parked car exposed to
direct sunlight.
Note:
Tip:
Indicates special notes and operating
features.
Indicates tips and hints for making the
task easier.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before play-
ing, clean the disc with a clean cloth. Wipe the
disc from the center out.
A section whose title has one of the following
symbols is applicable only to the disc represented
by the symbol.
DVD
DVD
VCD
CD
Video CDs
Audio CDs
JPEG JPEG Discs
Do not use strong solvents such as alcohol, ben-
zine, thinner, commercially available cleaners, or
anti-static spray intended for older vinyl records.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of Playable Discs
Disc-related terms
JPEG
DVD
Joint Pictures Expert Group. JPEG is a com-
pressed file format that allows you to save images
with no limit on the number of colors.
(8 cm / 12 cm disc)
Video CD (VCD)
(8 cm / 12 cm disc)
Title (DVD only)
Audio CD
A title is generally a distinct section of a DVD disc.
For example the main feature could be title 1, a
documentary describing how the film was made
could be title 2, and cast interviews could be title
3. Each title is assigned a reference number
enabling you to locate it easily.
(8 cm / 12 cm disc)
In addition, this unit plays DVD-R, DVD+R, DVD-
RW, DVD+RW, and CD-R / CD-RW that contains
audio titles, and/or JPEG files.
Chapter (DVD only)
Notes:
A chapter is a segment of a title such as a scene
in a film or one interview in a series. Each chapter
is assigned a chapter number, enabling you to
locate the chapter you want. Depending on the
disc, chapters may not be recorded.
•
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD
+R, DVD -RW, DVD +RW) disc itself, some
CD-R/RW (or DVD -R, DVD +R, DVD -RW,
DVD +RW) discs cannot be played on the unit.
Track
•
•
DVD-RW disc can only be played if it was
recorded in VIDEO mode and finalized.
A distinct element of audio/visual information,
such as the picture or sound track for a specific
language (DVD), or a musical piece on a video or
audio CD. Each track is assigned a track number,
enabling you to locate the track you want. DVD
discs allow one track of video (with multiple
angles) and several tracks of audio.
Do not attach any seal or label to either side
(the labelled side or the recorded side) of a
disc.
•
Do not use irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
result in malfunctions.
Types of Video CDs
There are two types of Video CDs:
Notes on DVDs and Video CDs
•
Video CDs equipped with PBC (Version 2.0)
PBC (playback control) functions allow you to
interact with the system via menus, search
functions, or other typical computer-like opera-
tions. Moreover, still pictures of high resolution
can be played if they are included in the disc.
Some playback operations of DVDs and Video
CDs may be intentionally programmed by soft-
ware manufacturers. This unit plays DVDs and
Video CDs according to disc content designed by
the software manufacturer, therefore some play-
back features may not be available or other func-
tions may be added.
•
Video CDs not equipped with PBC
(Version 1.1)
Operated in the same way as Audio CDs,
these discs allow playback of video pictures as
well as sound, but they are not equipped with
PBC.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Regional Code
About the Remote Control
Operation Range
This DVD+VCR is designed
and manufactured for playback
of region “1” encoded DVD
software. This unit can play
1
ALL
Point the Remote Control at the remote sensor
and press the buttons.
only DVD discs labeled “1” or “ALL”.
Distance: About 23 ft (7 m) from the front of the
remote sensor.
Notes on Regional Codes
Angle:
About 30° in each direction of the front of
the remote sensor.
•
•
Most DVD discs have a globe with one or
more numbers in it clearly visible on the cover.
This number must match your DVD+VCR’s
regional code or the disc cannot play.
Battery installation
Detach the battery cover on the rear
of the Remote Control, and insert
two (R03/AAA) size batteries with 3
and # aligned correctly.
If you try to play a DVD with a different region
code from your player, the message “Check
Regional Code” appears on the TV screen.
Do not mix old and new batteries and
never mix different types of batteries such
as standard, alkaline, etc.
Notes on Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copy-
righted material without permission.
Selecting the Viewing Source
You must select one of your output sources (DVD
or VCR) to view on the TV screen.
This product features the copy protection function
developed by Macrovision. Copy protection sig-
nals are recorded on some discs. When recording
and playing the pictures of these discs picture
noise will appear. This product incorporates copy-
right protection technology that is protected by
method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this
copyright protection technology must be author-
ized by Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
•
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display
window lights and output source of DVD deck
is viewed on the TV screen.
•
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display
window lights and output source of VCR deck
is viewed on the TV screen.
Notes:
•
•
•
If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
automatically.
Notice for Progressive Scan Use
If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode automatically.
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE DIS-
PLAYED IN THE PICTURE. IN CASE OF 525
PROGRESSIVE SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STAN-
DARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COM-
PATIBILITY WITH THIS MODEL 525p
To selecting and viewing the E to E sources (tuner,
line1, line2), the unit must be in VCR mode.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Labora-
tories.
DTS and DTS Digital Out are trademarks
of Digital Theater Systems, Inc.
DVD+VCR, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
This model is equipped with SQPB (S-VHS
QUASI PLAYBACK) that makes it possible
to play back S-VHS recordings with regu-
lar VHS resolution.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel
a
b
c
d
Disc Tray (DVD deck)
Indicates when the Progressive scan is
active.
[P]
Insert a disc here.
Indicates repeat mode.
Cassette Compartment (VCR deck)
Insert a video cassette here.
DVD+VCR is in timer recording or a
timer recording is programmed (VCR
part only).
POWER 1/:
Switches the DVD+VCR ON and OFF.
A cassette is in the VCR deck.
REW (m)
- DVD: Skip to beginning of current chapter or
track, press twice in quick successions to go to
previous chapter or track. Press and hold button
for about two seconds to search backward.
- VCR: Rewinds the tape during the stop mode or
for fast reverse picture search.
The VCR deck is selected.
VCR
REC
DVD+VCR is Recording.(VCR part only)
Indicates PM time. (AM is not diplayed.)
Lights when TV mode is active.
PM
TV
e
f
PLAY (N)
Indicates total playing time,
elapsed time, remaining time
or current deck status
Starts playback of a disc or tape.
FF (M)
(Playback, Pause, etc).
- DVD: Skip to next chapter or track. Press and
hold for two seconds for a fast forward search.
- VCR: Advances the tape during the STOP mode
or for fast forward picture search.
k
l
m
Remote Sensor
Point the DVD+VCR Remote Control here.
EJECT (Z)
g
h
STOP (x)
Stops playback of the disc or tape.
Ejects the tape in the VCR deck.
CH -/+
PAUSE (X)
Pause playback or recording. Press repeatedly for
frame-by-frame playback.
To scan up or down through memorized chan-
nels.
n
o
p
REC (z)
i
j
OPEN/CLOSE (Z)
Opens or closes the disc tray.
To record normally or to activate One-touch Timer
Recording by repeated presses.
Display Windows
VCR/DVD (output select)
Select one of your output sources to view on the
TV screen between DVD and VCR.
LINE2 (VIDEO/AUDIO (L/R) input)
Connect to the audio/video output of an external
source (Audio system, TV/Monitor, Another VCR).
The DVD deck is selected.
DVD
A disc is in the DVD deck.
(Lights when a disc is in the DVD deck
and Flashes when no disc.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPLAY Accesses On-Screen Display.
Switches between the clock, tape counter
Remote Control
and tape remaining modes on the display.
DVD Select the DVD+VCR function mode to DVD.
EJECT (Z) Ejects the tape in the VCR deck.
ENTER/OK Confirms menu selections. Displays
functions on the TV screen.
MARKER Marks any point during playback.
OPEN/CLOSE (Z) Opens and closes the disc tray.
PAUSE (X) Pause playback or recording.
Press repeatedly for frame-by-frame
playback.
PLAY (N) Starts playback.
POWER (1/:) Switches DVD+VCR ON and OFF.
PROGRAM Shows or hides the menu for Program
playback of Audio CD.
RANDOM Plays tracks in random order.
REC (z) Starts recording. Press repeatedly to set the
recording time.
REPEAT Repeats chapter, track, title or all.
REPEAT A-B Repeats sequence between two points
(A and B).
RETURN (O) Removes the setup menu.
REW (m)/FF (M)
- DVD: Search backward or forward.
- VCR: Rewinds/Advances the tape during the STOP
mode, for fast backward/forward picture search.
SEARCH Displays Marker Search menu.
SETUP MENU Accesses or removes DVD Setup
menu and VCR menu.
SKIP (. / >) Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
0-9 Selects numbered options in a menu.
b B v V Selects menu options.
SPEED Selects recording speed.
Fast forwards picture search through 30 seconds of
recording.
STOP (x) Stops playback or recording.
SUBTITLE Selects a subtitle language.
TITLE Displays the disc’s Title menu, if available.
AUX Selects the VCR deck’s source
(Tuner, LINE 1, or LINE 2).
A.MONITOR Selects an audio language (DVD) or an
TV/VCR To view channels selected by the VCR tuner
audio channel (VCD).
or by the TV tuner.
ANGLE Selects a DVD camera angle, if available.
VCR Select the DVD+VCR function mode to VCR.
ZOOM Enlarges DVD video image.
CH -/+ Selects VCR channels. Adjusts manually the
tape’s picture on the TV screen.
CLEAR (0000) Removes a mark on the Marker
Note:
Search menu.
The Remote Control of a JVC TV or Receiver will not
operate the unit.
DISC MENU Accesses menu on a DVD disc.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
a
b c d e
f
g
h
a
b
ANT.IN
e
AUDIO OUT (Left/Right) (DVD OUT)
Connect to a TV or other equipment with audio
inputs.
Connect the VHF/UHF/CATV antenna to this ter-
minal.
VCR IN LINE 1 (VIDEO/AUDIO
(Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/Monitor, VCR,
Camcorder).
f
g
h
AC Power Cord
Plug into the power source.
RF. OUT
Connect to a TV with RF coaxial inputs.
COAXIAL (DIGITAL AUDIO OUT jack)
(DVD OUT)
Connect to digital (coaxial) audio equipment.
c
d
DVD/VCR OUT (VIDEO/AUDIO
(Left/Right))
Connect to a TV with video and audio inputs.
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT (Y Pb Pr) (DVD OUT)
Connect to a TV with Y Pb Pr inputs.
Preparation
Depending on your TV and other equipment there are various ways you can connect
the player. Please refer to the manuals of your TV, VCR, stereo system or other devices
as necessary for additional connection information.
Notes:
•
The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. Position the units away
from each other or turn off the unit after removing the disc.
•
•
Make sure the DVD+VCR is connected directly to the TV and tune the TV to the correct video input channel.
Do not connect the DVD+VCR’s AUDIO OUT jack to the phone in jack (record deck) of your audio system.
Do not connect the DVD+VCR via another VCR. The DVD image could be distorted by the copy protection
system.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
To view or record a CATV channel when
using cable box
Connecting an Antenna
or Cable TV
1. Tune the TV to the DVD+VCR output channel
(CH 3 or 4).
a
Antenna:
Disconnect the antenna from the rear of the TV
and identify the antenna cable. If it is a round 75
ohm coaxial cable connect it directly to the jack
marked ANT.IN on your DVD+VCR. If your anten-
na cable is flat connect it to a 300-ohm to 75-ohm
antenna adaptor (not supplied) and slip the adap-
tor over the ANT.IN jack. Don’t attempt to screw it
into to the DVD+VCR.
2. Set the DVD+VCR channel selector to the
cable output channel. (Example: CH3)
3. Select a channel using the cable converter.
Notes:
•
With this connection, you cannot record one pro-
gram while viewing another.
•
If you are using a cable box to tune channels, it is
not necessary to do Auto Channel Set.
b
Cable TV:
If your cable connection has no converter or
descrambler, unscrew the cable from your TV and
attach it to the ANT.IN jack on the DVD+VCR. If a
converter is required connect a coaxial cable from
the wall jack to the IN connector on the converter,
and a coaxial cable from the OUT connector on
the converter to the ANT IN on your DVD+VCR.
This cable hookup permits both TV and
DVD+VCR operation.
Basic TV Connections
Make one of the following connections, depending
on the capabilities of your TV.
Antenna
Antenna
Rear of TV
ANTENNA
INPUT
VIDEO
INPUT
AUDIO INPUT
R
L
OR
OR
R
V
A1
Rear of DVD+VCR
Rear of DVD+VCR
C
A2
Y
Pr
Pb
R
L
COMPONENT/PROGRESSIVE SCAN
VIDEO INPUT
AUDIO INPUT
Rear of TV
11
Download from Www.Somanuals.com. All Manuals Search And Download.
RF coaxial connection
Optional TV Connections
These connections support only DVD playback.
The tuner and VCR still output through the
RF.OUT (R) or DVD/VCR OUT (A, V) jacks.
Connect the RF.OUT jack on the DVD+VCR to
the antenna in jack on the TV using the supplied
75-ohm Coaxial Cable (R).
How to set the DVD+VCR’s RF output
Component Video / Progressive Scan
connection
channel
1. When the DVD+VCR is turned off, press and
hold both CH - and CH + on the front panel for
more than five seconds. “RF03” or “RF04”
appears in the display window.
If your television is a high-definition or “digital
ready” television, you may take advantage of the
DVD+VCR’s progressive scan output for the high-
est video resolution possible.
2. Press either CH - or CH + to change the RF
output channel (RF03 or RF04). Tune the TV
to this channel.
1. Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD+VCR to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
3. Turn off the DVD+VCR.
2. Connect the Left and Right AUDIO OUT jacks
of the DVD+VCR to the audio left/right in jacks
on the TV (A2) using an optional audio cables.
Audio/Video connection
1. Connect the DVD/VCR VIDEO OUT jack on
the DVD+VCR to the video in jack on the TV
using an optional video cable (V).
Notes:
•
•
•
When you use Composite Video signal, set the
Progressive Scan to “Off” on the setup menu.
2. Connect the Left and Right DVD/VCR AUDIO
OUT jacks on the DVD+VCR to the audio
left/right in jacks on the TV (A1) using an
optional audio cables.
Progressive scan does not work with the Composite
video connections (yellow VIDEO OUT jack).
If your TV does not accept the Progressive Scan for-
mat, the picture will appear scrambled. Switch to
composite video output.
Note:
If you use this connection, set the TV’s source selector
to VIDEO.
Audio Connection for DVD
You can listen to playback using DVD/VCR
AUDIO OUT (A1), AUDIO OUT (A2), COAXIAL
(X) and RF. OUT (R) connections. COAXIAL (X)
and AUDIO OUT (A2) is used only for listening to
DVD playback. (See page 11.)
Connecting to an amplifier equipped with two
channel analog stereo
Connect the Left and Right AUDIO OUT (or
DVD/VCR AUDIO OUT) jacks on the DVD+VCR
to the audio left and right in jacks on your amplifi-
er, receiver, or stereo system using an optional
audio cables (A1, A2).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an
Audio/Video receiver equipped with a multi-
channel decoder (Dolby Digital™, MPEG 2, or
DTS)
Connecting External Audio/Video (A/V)
source to DVD+VCR
Connect the VCR IN LINE 1 or LINE 2 jacks on
the DVD+VCR to the audio/video out jacks on
your accessory component, using the optional
audio/video cables. (Refer to page 24 for
“Recording from External Components”.)
1. Connect the DVD+VCR’s DIGITAL AUDIO
OUT jacks (COAXIAL X) to the corresponding
in jack on your amplifier. Use a digital (COAXI-
AL X) audio cable.
2. You will need to activate the DVD+VCR’s digi-
tal output. (See “AUDIO” on page 18).
Jack panel of external source
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of
the audio formats supported by your DVD+VCR
(MPEG 2, Dolby Digital and DTS). Check the
receiver manual and the logos on the front of the
receiver.
Caution:
This DVD+VCR is not equipped with DTS decoder,
but DTS will be output through Digital coaxial out
when DTS audio stream is selected in DVD disc
soundtrack menu.
Notes:
•
•
•
If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will pro-
duce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital con-
nection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
To see the audio format of the current DVD in the
on-screen display, press A.MONITOR.
Rear of DVD+VCR
A1
A2
X
R
L
COAXIAL
DIGITAL INPUT
AUDIO INPUT
Amplifier (Receiver)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
AUTO CLOCK SET
Initial Settings - VCR
The Auto Clock Set feature is set to ON at the
factory. In the ON setting, the DVD+VCR looks
for a channel carrying XDS (Extended Data
Services) information. XDS updates the clock
using the Coordinated Universal Time.
- Use b / B to choose ON or OFF.
By using the VCR Setup menu, you can make
various adjustments to items such as clock set-
ting, and timer recordings.
Your DVD+VCR allows Remote Control adjust-
ment of several features.
• DAYLIGHT SAVINGS
You can turn Daylight Savings On or Off manu-
ally. If you choose “AUTO”, the DVD+VCR sets
the clock using the DST information broadcast
in the signal (channel).
General Operation
1. Press VCR on the Remote Control.
2. Press SETUP MENU and the MAIN menu will
appear.
- Use b / B to choose AUTO, ON or OFF.
• TIME ZONE
You can set your local Time Zone manually. If
you choose “AUTO”, the DVD+VCR sets the
clock using the first Coordinated Universal Time
information it finds in a broadcast signal.
- Use b / B to choose the correct time zone
(AUTO, EASTERN, CENTRAL, MOUNTAIN,
PACIFIC, ALASKA or HAWAII).
Notes:
3. Use v / V to select the desired menu, then
•
The Auto Clock feature enables the DVD+VCR to
set up the clock while the DVD+VCR is turned off.
press ENTER / OK.
•
There are cases where the TV station does not send
or sends wrong date and/or time information and the
DVD+VCR sets the incorrect time. If this happens
we recommend that you set the clock manually.
4. Use v / V to choose a desired option on the
selected Menu. Then use b / B to choose a
desired setting.
5. Press SETUP MENU when finished.
Note:
Manual Clock Set
Menus remain on-screen for 3 minutes.
Use v / V / b / B to enter the necessary informa-
tion.
•
•
MONTH : Choose the month.
DAY : Choose the date.
The day of the week will display automatically.
CLOCK
• YEAR : Choose the year.
The DVD+VCR gives you two ways to set the time
and date: the Auto Clock Feature or Manually.
• TIME : Choose the time.
Press and hold b / B to advance clock continuously.
Notes:
Auto Clock Set
•
If setting the clock manually, “AUTO CLOCK SET”
must set to “OFF”. If it is left set to “ON,” it will over-
ride the manual setting after the unit is turned off.
•
The clock uses the 12-hour system. Be sure to set
AM and PM correctly.
PROGRAM
The Timer Recording function allows you to record
up to 8 programs within a period of one year. (See
pages 23-24).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
TUNING
SETUP
This DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Auto Channel Programming
FUNCTION OSD
The on-screen display can be turned on or off.
AUDIO MODE
The DVD+VCR has two separate audio playback
systems, the high quality VHS Hi-Fi system and
standard NORMAL mono system. The same
audio is generally recorded on both systems. The
VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMAL system plays
monaural sound. The normal track is always
played so the cassette can be played on a
DVD+VCR that does not have VHS Hi-Fi.
1. Choose the SOURCE SELECT option, then
use b / B to select TUNER.
Use b / B to switch among TUNER, LINE1, and
LINE2.
2. Choose the AUTO CHANNEL SET option,
then use b / B to find channels.
BROADCAST TYPE (STEREO / SAP / MONO)
• The tuner will automatically cycle through all
available channels (TV/CATV) in the area and
place them in the tuner’s memory.
Multichannel Television Sound (MTS) carries
stereo and/or Second Audio Program (SAP) bilin-
gual signals. Set this display to the desired posi-
tion when both MTS stereo and SAP signals are
received. When only one of the MTS signal is
received, the DVD+VCR automatically selects the
corresponding receiving mode (Stereo or SAP)
regardless of the selected position. For normal
operation, the display should be in the STEREO
position. The DVD+VCR will then record a
STEREO program when available, and record a
mono program IF the program is NOT IN
STEREO. For weak STEREO and/or SAP broad-
casts, changing the display to mono may give
clearer sound.
• After the AUTO CHANNEL SET is complete, the
TUNING menu will hide and return to the TV
screen automatically.
• If the power fails or the DVD+VCR is unplugged
the channel settings are kept in memory for only 3
seconds.
3. Make sure the TUNING BAND is set appropri-
ately (TV or CATV).
• TV : If you are using a standard antenna to
receive channels.
• CATV : If you are using basic cable to receive
channels.
AUDIO OUTPUT (STEREO / LEFT / RIGHT)
To Add or Erase Channels
This feature allows you to add or erase channels
from memory manually.
Used during playback [when AUDIO MODE (HI-FI/
NORMAL) is in HI-FI position] for selecting the
audio output signals from the AUDIO OUT termi-
nals (L ch and R ch), and RF.OUT. This display
setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the
stereo sound will be heard through the left and right
channels. If a mono tape is played and the audio
output is set to stereo, the same mono sound will
be heard from both left and right channels.
In addition to the above settings, these other
sources are also affected:
1. Choose the CH. ADD/DEL option, then use b
/ B to select a channel to add or erase.
2. Use ENTER / OK to add or erase the channel.
Repeat steps 1 and 2 to add or erase other
channels.
3. Press SETUP MENU to return to the TV
screen.
1. Playback of CD, DVD or VCD
2. Output of built in tuner, Line 1 or Line 2
15
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE
Initial Settings - DVD
By using the DVD Setup menu, you can make
various adjustments to items such as picture and
sound. You can also set a language for the subti-
tles and the Setup menu, among other things. For
details on each Setup menu item, see pages 16 to
19.
LANGUAGE
English
Original
Original
Original
Menu Language
Disc Audio
Disc Subtitle
Disc Menu
Move
Select
To display and exit the Menu:
Press SETUP MENU to display the menu. A sec-
ond press of SETUP MENU will take you back to
initial screen.
Menu Language
Select a language for the VCR and DVD’s setup
menu and information display.
To go to the next level:
Press B on the Remote Control.
Disc Audio / Subtitle / Menu DVD
To go back to the previous level:
Press b on the Remote Control.
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
Original: Refers to the original language in which
the disc was recorded.
General Operation
Other: To select another language, press number
buttons then ENTER / OK to enter the correspon-
ding 4-digit number according to the language
code list in the reference chapter (see p. 35). If
you enter the wrong language code, press
CLEAR (0000).
1. Press DVD on the Remote Control.
2. Press SETUP MENU.
The Setup menu appears.
3. Use v / V to select the desired option then
press B to move to the second level. The
screen shows the current setting for the
selected item, as well as alternate setting(s).
Off (for Disc Subtitle): Turn off Subtitle.
4. Use v / V to select the second desired option
then press B to move to the third level.
5. Use v / V to select the desired setting then
press ENTER / OK to confirm your selection.
Some items require additional steps.
6. Press SETUP MENU or PLAY (N) to exit the
Setup menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4. When the confirm menu appears on your
screen “Cancel” is highlighted as default. Use
the b button to highlight “Enter”.
DISPLAY
DISPLAY
TV Aspect
4
:
3
Display Mode
Progressive Scan
Letterbox
Off
Move
Select
5. Pressing ENTER ✳ O❏ will set this unit to pro-
DVD
TV Aspect
gressive scan mode.
4:3 :
Select when a standard 4:3 TV is connected.
Notes:
16:9 : Select when a 16:9 wide TV is connected.
•
If you set Progressive Scan to ON in error, you must
reset the DVD+VCR. Press STOP (x) and hold it for
more than five seconds before releasing it. The
video output will be restored to the standard setting,
and a picture will once again be visible on a conven-
tional analog TV or monitor.
DVD
Display Mode
Display Mode setting works only when the TV
Aspect mode is set to “4:3”.
•
Do not turn off this DVD+VCR while the “PROGRES-
SIVE SCAN MODE” message is displayed in the TV
screen.
Letterbox: Displays a wide picture with bands on
the upper and lower portions of the screen.
Panscan: Automatically displays the wide picture
on the entire screen and cuts off the portions that do
not fit.
DVD
Progressive Scan
Progressive Scan Video provides the highest
quality pictures with less flickering.
If you are using the Component Video jacks for
connection to a TV or monitor that is compatible
with a progressive scan signal, set Progressive
Scan to On.
To turn on progressive scan:
Connect component/progressive out of this unit to
the input of your monitor/television, set your tele-
vision or monitor to component/progressive Input.
1. Select “Progressive Scan” on the DISPLAY
menu then press B.
2. Select “On” using the v / V buttons.
3. Press ENTER / OK to confirm your selection.
The confirm menu will appear.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDIO
DVD
DRC (Dynamic Range Control)
Each DVD disc has a variety of audio output
options. Set this unit’s AUDIO options according
to the type of audio system you use.
With the DVD format, you can hear a program’s
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio tech-
nology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest
ones). This allows you to listen to a movie at a
lower volume without losing clarity of sound. Set
DRC to On for this effect.
AUDIO
Dolby Digital
DTS
Bitstream
Bitstream
PCM
MPEG
Sample Freq.
DRC
48 kHz
On
Move
Select
DVD
Dolby Digital / DTS / MPEG
Bitstream: Select “Bitstream” if you connect
the DVD+VCR’s DIGITAL AUDIO OUT jack to
an amplifier or other equipment with a Dolby
Digital, DTS or MPEG decoder.
PCM (for Dolby Digital / MPEG): Select
when connected to a two-channel digital
stereo amplifier. DVDs encoded in Dolby
Digital or MPEG will be automatically down-
mixed to two-channel PCM audio.
Off (for DTS): If you select “Off”, the DTS sig-
nal is not output through the DIGITAL AUDIO
OUT jack.
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of
handling 96 kHz signals, select 48 kHz. When this
choice is made, this unit automatically converts
any 96 kHz signals to 48 kHz so your system can
decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
made, this unit passes each type of signal through
without any further processing.
Check the documentation for your amplifier to ver-
ify its capabilities.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
B.L.E. (Black Level Expansion)
OTHERS
To select the black level of playback pictures.
Set your preference and monitor’s ability.
The Auto Play, and B.L.E. settings can be
changed.
On: Expanded grey scale. (0 IRE cut off)
Off: Standard grey scale. (7.5 IRE cut off)
OTHERS
PBC
On
On
Off
Auto Play
B.L.E.
Move
Select
VCD
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to
the PBC.
Off: Video CDs with PBC are played the same
way as Audio CDs.
DVD
Auto Play
You can set up the DVD+VCR so a DVD disc
automatically starts playing whenever the DVD is
inserted.
If Auto Play mode is set to On, this DVD player
will search for title that has the longest playback
time and then play back the title automatically.
On: Auto Play function is active.
Off: Auto Play function is not active.
Note:
The Auto Play function may not work for some DVDs.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
This chapter describes how to operate the VCR
and DVD.
Manual Tracking
To manually adjust the tracking use the CH -/+
buttons during playback.
VCR Tape Playback
Notes:
Press the VCR button to select the device to be
•
•
Vertical jitter requires a very fine adjustment.
operated.
Tracking is automatically reset to normal when the
tape is ejected or the power cord is unplugged for
more than 3 seconds.
Basic Instructions
1. Turn on the TV.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO
connection is made between the DVD+VCR
and the TV, set the TV’s source selector to
VIDEO.
Search
This function lets you visually search for a tape
section in either direction: forward and reverse.
During the high-speed picture search modes, the
audio is muted and horizontal lines (noise bars)
appear. Also, a short time is needed to stabilize
the tape speed when re-entering the PLAY mode
so slight interference may be observed during this
time.
3. Insert a pre-recorded video cassette.
The
indicator lights and the DVD+VCR
powers on automatically.
4. If the (TIMER) indicator in the display win-
dow is lit press POWER 1/: once.
To search:
5. If a tape without a safety tab is inserted the
unit starts playback automatically.
If not, press PLAY (N).
1. Press REW (m) or FF (M) during play-
back.
2. To return to playback, press PLAY (N).
6. Press STOP (x) to stop playback. If the tape
reaches the end before you press STOP (x)
the DVD+VCR automatically stops, rewinds
and ejects the tape.
Notes:
•
•
After 3 minutes in SEARCH mode the DVD+VCR
returns to PLAY mode to protect the tape and video
heads.
Notes:
During the tape fast rewinding (backward or for-
ward), don’t press the same button (REW or FF)
again. Otherwise it takes more time to rewind the
tape.
•
It is not necessary to select the tape speed for play-
back because it is automatically selected by the
DVD+VCR.
Also, during playback the TV/VCR selector switches
to VCR mode automatically.
•
When playing back tapes that have been over-
recorded with new content, the original audio may
be audible during auto tracking.
Still Picture and Frame-by-Frame
Playback
1. Press PAUSE (X) during playback.
A still picture appears on the TV screen and
the audio is muted.
Auto Tracking
Automatic tracking adjusts the picture to remove
snow or streaks when:
2. If the still picture vibrates vertically, stabilize it
by using CH -/+ on the Remote Control.
•
•
•
A tape is played for the first time.
3. Press PAUSE (X) repeatedly to advance the
The tape speed (SP, LP, SLP) changes.
video picture one frame at a time.
Streaks or snow appear due to scratches on
the tape.
4. To return to playback, press PLAY (N).
Note:
After 5 minutes in STILL mode the DVD+VCR stops to
protect the tape and video heads.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Slow Motion
1. While in still mode, press FF (M). The tape
is played at a speed 1/19 times slower than
the normal speed.
2. Use CH -/+ on the Remote Control if neces-
sary to adjust the tracking.
3. To return to the normal speed, press PLAY
2. Set the AUDIO OUTPUT option to STEREO
so that the left channel sound (L) is heard from
the left speaker and the right channel sound
(R) is heard from the right speaker.
(N).
Notes:
•
During slow motion, audio is muted and horizontal
lines (noise bars) may appear on the TV screen. This
is normal.
•
After 3 minutes in SLOW MOTION mode the
DVD+VCR goes back to PLAY mode to protect the
tape and video heads.
The other options are (LEFT) POSITION,
which results in the left channel sound (L)
being heard from both speakers or (RIGHT)
POSITION, which results in the right channel
sound (R) being heard from both speakers.
CM SKIP (Commercial Skip)
This feature is useful for skipping commercials or
short program segments.
1. Press
in playback mode.
The DVD+VCR performs a fast forward picture
search through 30 seconds of recording.
3. Insert a cassette and press PLAY (N).
Note:
2. Press
again to extend the search time by
an addition 30 seconds. The maximum search
time is 3 minutes.
If playing back a HI-FI tape produces noisy audio, man-
ually change the menu setting from HI-FI to NORMAL.
3. When the search is complete, the DVD+VCR
goes into playback mode automatically.
MTS (Multi-Channel TV Sound)
This DVD+VCR can decode MTS stereo and bilin-
gual (SAP) off-the-air broadcast sound signals. It
also decodes stereo TV sound from local cable
companies as long as they operate on assigned
cable frequencies and use the EIA-recommended
MTS stereo/bilingual TV sound system.
VHS Hi-Fi Stereo / MTS
Broadcast
This DVD+VCR is equipped with the VHS Hi-Fi
audio sound system for recording and playback.
The information below gives a brief description of
Hi-Fi audio and how to record and play a tape in
the Hi-Fi audio mode.
Multichannel TV Sound Indicator (MTS)
When you press ENTER / OK one or both of the
indicators appears on the TV Screen.
STEREO
The DVD+VCR can record in stereo onto the VHS
Hi-Fi audio tracks when the BROADCAST TYPE
option is in the STEREO position. The DVD+VCR
can also record mono audio onto the mono audio
track.
Hi-Fi Stereo Audio Sound
A stereo TV with AUDIO/VIDEO input jacks or a
stereo audio system is required for true stereo
playback. To experience the full and rich stereo
sound available with Hi-Fi recorded tapes, we rec-
ommend the connection of this unit to a home
stereo audio system.
SAP
Some stations transmit a Second Audio Program,
which is used for a second language or additional
information.
1. Set the AUDIO MODE option to HI-FI on the
VCR SETUP menu.
STEREO/SAP
Use the BROADCAST TYPE option to select the
desired recording mode (STEREO or SAP).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
To record one TV program while watching
another
VCR Tape Recording
Basic Instructions
1. Press TV/VCR to select the TV mode during
recording. The TV indicator appears.
1. Turn on the DVD+VCR and TV.
2. Using the TV, select the channel to be viewed.
2. Tune the TV to the DVD+VCR output channel
(CH 3 or 4) or if a direct VIDEO/AUDIO con-
nection is made between the DVD+VCR and
the TV, set the TV’s source selector to VIDEO.
3. Insert a video cassette with the safety tab
intact.
Timer Recording
4. Select the desired channel using CH -/+.
For unattended recording, you must input the
channels to be recorded and the starting and end-
ing times.
5. If you are recording from another source via
audio/video input jacks (at the rear or front
panel), select LINE1 or LINE2 using AUX, CH
+ or CH -.
Things to know before starting
6. Set the desired recording speed (SP or SLP)
by pressing SPEED. This DVD+VCR is not
designed to record in LP mode.
If you try to set the program timer before set-
ting the clock, “PLEASE SET THE CLOCK”
appears for a moment and then CLOCK
menu appears on the TV screen. Set the time
and date before proceeding.
7. Set the MTS mode (STEREO or SAP). Set the
BROADCAST TYPE option to SAP if applica-
ble.
1. Turn on the DVD+VCR and the TV.
8. Press REC (z) and recording starts. The REC
indicator appears in the display window. If a
cassette with no safety tab is loaded, the cas-
sette is ejected.
2. Be sure the TV is set to the DVD+VCR output
channel (3 or 4).
3. Make sure the TUNING BAND in the TUNING
menu is set appropriately (TV or CATV).
9. Press STOP (x) to stop recording. If the tape
reaches the end before STOP (x) is pressed,
the DVD+VCR stops, rewinds and ejects the
tape.
4. Press SETUP MENU and the MAIN menu
appears.
Tip:
5. Use v / V to choose the PROGRAM menu
Use PAUSE (X) for best results when making changes
while recording. For example, if you want to change
channels while recording, first press PAUSE (X) to put
the unit in pause mode, select the desired channel on
the DVD+VCR, and then press PAUSE (X) again to
resume recording.
and press ENTER / OK.
Note:
During the VCR recording mode, you cannot change to
the DVD mode.
If eight programs are already entered, the
FULLY PROGRAMMED message appears for
a moment and then PROGRAM 1 appears on
the TV screen.
To pause the recording
6. Use the v / V buttons to switch between the
program options, and the b / B buttons to
input the program information:
1. Press PAUSE (X) to pause the tape during
recording. The REC indicator flashes in the
display window.
Input the month, day, start and stop times of
the program you want to record.
2. When you want to continue recording, press
PAUSE (X) or press REC (z).
After 5 minutes in PAUSE mode, the
DVD+VCR stops automatically to protect the
tape and the video heads.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel: Select a TV channel, LINE1 or
LINE2. If you have CABLE TV and use a cable
box (converter) you must set the channel to
match the cable box output channel (usually
CH 3 or 4). Change channels on the cable box
instead of with the DVD+VCR. If you use a
cable converter, you can program multiple
recordings only on the converter box output
channel. This is because the converter deter-
mines what channel you view through your
DVD+VCR.
Checking or Erasing the Timer Program
Programming can be checked whenever the
DVD+VCR is turned on.
1. Press SETUP MENU and the MAIN menu
appears.
2. Use v / V to choose the PROGRAM menu
and press ENTER / OK.
Speed: AUTO mode determines how much
tape is left and switches the speed from SP to
SLP if it is necessary to complete recording
the program.
If this occurs there could be some picture and
sound distortion at the point where the speed
changes.
3. Use b / B to select a program you want to
check or erase. To erase the program, press
CLEAR (0000).
Repeat: To record up to 8 programs on a cer-
tain day of every week select WEEKLY. To
record up to 8 programs at the same time
Monday through Friday select DAILY.
Otherwise select ONCE.
4. Press SETUP MENU to return to the TV
screen.
7. Press SETUP MENU and the program is
memorized by the DVD+VCR.
Program Priority
8. Additional programs may be entered by
repeating steps 1-7.
If the recording start and end times of preset pro-
grams overlap on the same day (see the exam-
ple), the second program is not recorded until the
first is finished.
9. Ensure you insert a tape with the record safety
tab intact before the first programmed time.
10. Press STOP (x) to end timer recording.
Notes:
•
If you make a mistake or want to change a setting,
use v to select the option and correct it using b / B.
•
If the program preset time is past, the “PAST TIME
PROGRAMMED” message appears on the TV
screen. Return to the incorrect program and pro-
gram it with the correct time.
In this example, the first part of program numbers
2 and 3 are not recorded.
•
•
If you enter a past date, the timer recording will be
performed on that date of the next year.
If the power fails or the DVD+VCR is unplugged the
clock and timer settings are kept in memory for only
3 seconds. Otherwise you must reset the clock and
timer.
•
•
If the tape indicator is blinking, no tape is loaded.
When you are playing DVD at programmed
Recording time, the DVD+VCR automatically
change to VCR mode and start recording.
•
The DVD+VCR will automatically power off when
Timer Recording ends.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Extending the Recording Time
Instant Timer Recording
The recording time can be extended anytime by
pressing REC (z). Subsequent presses result in
advancing the recording time by 30-minute
increments.
With this feature you can record for a preset
length without using the program timer.
1. Turn on DVD+VCR and the TV.
2. Be sure the TV is tuned to the DVD+VCR out-
put channel (CH 3 or 4). If a direct
Note:
If you press PAUSE (X) during instant timer recording,
the instant timer recording is cancelled. It goes to nor-
mal recording PAUSE mode.
VIDEO/AUDIO connection is made between
the DVD+VCR and the TV, set the TV’s
source selector to VIDEO.
3. Insert a video cassette with the safety tab
intact.
4. Select the desired channel using CH -/+ or the
number buttons (0-9). The channel number
appears on the TV screen. If you are recording
from another source via audio/video input
jacks (at the rear or front panel), select LINE1
(rear jacks) or LINE2 (front jacks) by using
AUX.
Recording from External
Components
You can record from an external component, such
as a camcorder or VCR, connected to any of the
DVD+VCR’s external inputs.
5. Set the desired recording speed (SP or SLP)
using SPEED. The tape speed appears on the
TV screen.
1. Make sure that the component you want to
record from is connected properly to the
DVD+VCR. See page 13.
2. Press AUX repeatedly to select the external
input to record from.
6. Press REC (z) twice. The menu appears on
the TV screen, recording starts, and the
(TIMER) indicator lights.
•
LINE1 (L1): Audio/Video Input mounted on
back panel.
INSTANT TIMER RECORD
•
LINE2 (L2): Audio/Video Input mounted on
front panel.
CHANNEL
SPEED
2
SP
3. Load a recordable tape.
START
NOW
4. Set a recording mode (SP or SLP) as neces-
sary by pressing SPEED repeatedly.
LENGTH
0H30M
5. Play the tape or disc in the external compo-
nent.
7. Press REC (z) repeatedly to select the
recording time length. Each time you press
this button the recording time increases 30
minutes (up to 9 hours). At the end of the
recording, the DVD+VCR will stop recording
and shut off.
If you have a TV attached to your DVD+VCR,
you can see the video palying.
6. Press REC (z) once to start recording.
The REC indicator lights in the display win-
dow.
If you set the time to 0H00M, the DVD+VCR
goes into the normal recording mode. Press
STOP (x) to stop the recording.
7. Press STOP (x) to stop recording.
Notes:
•
Before recording, confirm the recording start posi-
tion.
Checking the Recording Time
•
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
Copyright on page 7 for more details.
Press REC (z) once to check the recording time.
The recalled setting automatically returns to the
TV screen after 6 seconds.
•
To record for a fixed length of time, see Instant
Timer Recording.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Each press of ENTER/OK changes the TV
screen in the following sequence.
Copying from DVD to VCR
You can copy the contents of a DVD to a VHS tape.
STOP
SP
CH
4
STEREO
1. Insert the disc you wish to copy into the DVD
deck and close the disc tray.
APR 30 , SAT
2:15 PM
2. Insert a blank VHS video tape into the VCR deck.
2:15 PM
0:35:40
3. Find the place on the DVD from which you
want to start dubbing using the PLAY, FF,
REW and PAUSE functions.
REM 1:58
For best results, pause playback at the point
from which you want to record.
Real-Time Counter
If a tape with contents recorded on it is inserted
into the VCR, the real-time counter shows length
of the tape running in hours, minutes, and sec-
onds. Press DISPLAY to select the real-time
counter display. Every press of DISPLAY
4. Press REC (z). The DVD goes into PLAY
mode and the VCR goes into RECORD mode.
If the DVD disc menu appears, you may need
to press PLAY (N) manually to begin copying.
changes the TV screen as illustrated below.
5. When the DVD is finished playing,
press STOP (x) to end copying.
2:15 AM
0:05:25
REM 1:07
Notes:
•
If the DVD you are attempting to copy is copy pro-
tected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Discs). “Lock” is displayed in the display window.
Counter Memory
This feature is useful if there is a section of tape
you want to view immediately after recording or if
you want to return to the same point several
times.
•
You must stop the copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
1. Begin recording or playing a tape.
2. Press DISPLAY until the real-time counter is
displayed on the TV screen.
•
•
•
When you stop the DVD playback during copying,
the recording on VCR is stopped automatically.
3. At the point that you want to locate later, reset
the real-time counter to “0:00:00” by pressing
CLEAR (0000).
The mark of DVD playback will be recorded at the
beginning of the copied tape.
If you press DISPLAY during copying the on-screen
display will be recorded on the copied tape. Do not
press any button on the remote control except when
you want to stop copying.
4. Continue to play or record.
5. Press STOP (x) when recording or playback
finishes.
6
Press REW (m). The tape automatically
stops when the tape counter returns to about
“0:00:00”.
•
During this recording, do not operate the REW and
FF functions. Otherwise it would record the fast
moving picture without sound on the tape.
Tape Remaining
This function displays the amount of time remain-
ing on the tape during recording or playback.
Press DISPLAY repeatedly until the REM indica-
tor displays on the TV screen during recording or
playback.
The remaining tape length may not be displayed
correctly depending on the condition of the tape and
the kind of the tape (T-140, T-160, or T-210 etc.).
On-Screen Display - VCR
Some of these functions will be displayed every
time the DVD+VCR is operated.
❶
❷
❸
❹
❺
PLAY
SP
HI-FI
CH 4
STEREO
Notes:
•
•
•
The function displays can be seen displayed on the
TV screen for 5 seconds.
The clock (or tape counter, tape remaining) mode
will be displayed until you press ENTER / OK.
OCT 8 , SAT
2:15 PM
❻
❼
The tape counter and the remaining tape length indi-
cator appear only when a cassette is inserted. Also,
the remaining tape length indicator appears after
any tape operation.
❶ TAPE SPEED DISPLAY
❷ FUNCTION DISPLAY
❸ HI-FI DISPLAY
(Only when the HI-FI audio
sound is recorded)
❺ STEREO / SAP DISPLAY
(MONO is not displayed)
❻ DATE DISPLAY
❼ CLOCK / COUNT/
REMAIN DISPLAY
❹ CHANNEL DISPLAY
25
Download from Www.Somanuals.com. All Manuals Search And Download.
S-VHS Quasi Playback (SQPB)
Additional VCR Information
•
•
•
During manual recording, timer recording,
Instant Timer Recording, playback, or fast for-
ward modes, the DVD+VCR automatically
starts rewinding the tape at the end of the tape.
The cassette stops at the beginning of the tape
and is ejected.
•
•
This DVD+VCR can play back S-VHS record-
ed tapes, however, it cannot record video on
S-VHS format.
SQPB is an abbreviation for S-VHS Quasi
Playback.
After you have finished using the DVD+VCR,
rewind, eject, and remove the cassette. Place
the cassette in its protective sleeve to protect it
from dust. It is not necessary to rewind the cas-
sette before removing it, but if you do, it is
ready to play or record the next time you use it.
Note:
Playback picture of SQPB may be distorted in the fol-
lowing cases:
•
•
When starting playback.
When changing the playback mode between for-
ward or reverse picture search and normal play-
back.
Be sure the DVD+VCR channel selector is on
the correct channel you wish to record. The
channel that is being recorded can always be
checked by setting the television on the
DVD+VCR channel (CH 3 or 4) and pressing
the TV/VCR to turn the DVD+VCR’s TV indi-
cator off.
•
When changing the operating deck (VCR or DVD).
Easy Information
If the Extended Data Service (XDS) signals are
provided along with normal TV signal in your area
or during playback of a tape recorded with
Extended Data Service (XDS) signals, the station
ID, program title, and program details are shown
on the TV screen. When viewing a channel with
Extended Data Service (XDS) signals, press
ENTER / OK and the station ID will appear on the
TV screen. Press ENTER / OK again and the pro-
gram details will appear on the TV screen.
When viewing a tape recorded with Extended
Data Service (XDS) signals, press ENTER / OK
twice and the program title and program details
will appear on the TV screen.
•
Do not attempt to hook up more than one tele-
vision set to the DVD+VCR for either record-
ing or playback.
VCR Auto Play System
This DVD+VCR features automatic playback.
When you load a tape with the safety tab removed
the following occurs:
Program Details
LENGTH: Indicates the run length of a program.
TIME REMAINING: Indicates the remaining time of
a program.
RATING: Indicates the rating of the current program
(N/A, G, PG, PG-13, R, NC-17, X and Not Rated).
The rating N/A means that the motion picture ratings
are not applicable to this program.
•
•
•
•
The Output Source is changed to VCR mode
automatically.
The power turns on automatically and playback
begins.
At the end of the tape, the DVD+VCR stops, then
rewinds.
CH 4
The tape is ejected after rewinding and the turns
itself off automatically.
SP
WABC
STEREO
“Home video”
APR 30 , SAT
2:15 PM
Easy Information Screen
(Station ID)
Note:
Auto power off does not function during regular DVD
play mode. (DVD+VCR power stays on.)
PROGRAM DETAILS
“Home video”
LENGTH 01:00
TIME REMAINING 00:26
RATING N/A
Easy Information Screen
(Program details)
26
Download from Www.Somanuals.com. All Manuals Search And Download.
General Features
Note:
Playing a DVD or Video CD
Playback Setup
1. Turn on the TV and select the video input
source connected to the DVD+VCR.
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
DVD
Moving to another TITLE
2. Turn on the audio system (if applicable) and
select the input source connected to the
DVD+VCR.
When a disc has more than one title, you can
move to another title. Press DISPLAY and select
desired title by using number (0-9) or b / B then
press ENTER / OK to move to another title.
3. Press OPEN/CLOSE (Z) to open the disc tray
and load your chosen disc in the tray, with the
playback side down.
4. Press OPEN/CLOSE (Z) to close the tray.
Playback starts automatically. If playback does
not start, press PLAY (N).
DVD
VCD
Moving to another CHAPTER
When a title on a disc has more than one chapter,
you can move to another chapter as follows:
In some cases, the disc menu might appear
instead.
•
Press SKIP (> or .) briefly during play-
back to select the next chapter or to return to
the beginning of the current chapter.
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending
on the disc. “Xx” appears on the screen
•
•
Press SKIP (.) twice in quick successions
to step back to the previous chapter.
briefly. Press PLAY (N) to resume playback
(from the scene point). If you press STOP (x)
again or unload the disc (“x” appears on the
screen.), the unit will clear the stopped point.
Press OPEN/CLOSE (Z) to remove the disc.
Press OPEN/CLOSE (Z) to close disc tray or
press POWER 1/:, the disc tray closes auto-
matically and unit turns off.
To go directly to any chapter during DVD play-
back, press DISPLAY and press v / V to
select the chapter icon. Input the chapter num-
ber (0-9) or use b / B.
DVD
VCD
Slow Motion
If a menu screen is displayed
1. Press PAUSE (X) during playback.
The menu screen may be displayed first after
loading a DVD which offer a menu.
The DVD+VCR will now go into PAUSE mode.
2. Use FF (M) to select the required speed: T
1/7, T 1/6, T 1/4, or T 1/2 (forward).
DVD
Use the b B v V buttons to select the
title/chapter you want to view, then press
ENTER / OK to start. Press TITLE or DISC
MENU to return to the menu screen.
3. To exit Slow Motion mode, press PLAY (N).
Note:
VCD
Slow motion playback in reverse is not possible.
Use the number buttons to select the track you
want to view and press RETURN to return to
the menu screen. Menu settings and operating
procedures may differ. Follow the instructions
on each menu screen. You also may set PBC
to Off (See “PBC” on page 19).
Note:
DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Still Picture and Frame-by-Frame Playback
DVD
VCD
Repeat
DVD
VCD
You can repeat a title/chapter on a disc.
Press REPEAT during playback to select a
desired repeat mode.
1. Press PAUSE (X) during playback. Advance
the picture frame-by-frame by pressing PAUSE
DVD Video Discs - Repeat Chapter / Title / Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
(X) repeatedly.
2. To exit still motion mode, press PLAY(N).
• Off: does not play repeatedly.
DVD
VCD
Search
Video CDs - Repeat Track / All / Off
• Track: repeats the current track.
• All: repeats all the tracks on a disk.
• Off: does not play repeatedly.
1. Press REW (m) or FF (M) during playback.
2. Press REW (m) or FF (M) repeatedly to
select the required speed.
DVD: X2, X4, X16 or X100
Notes:
VCD: X2, X4 or X8
•
On a Video CD with PBC, you must set PBC to Off
on the setup menu to use this function (See “PBC”
on page 19).
3. To exit SEARCH mode, press PLAY (N).
DVD
VCD
Time Search
•
If you press > once during Repeat Chapter
To start playing at any chosen time on the disc:
(Track) playback, the repeat playback cancels.
1. Press DISPLAY during playback. The time
search box shows the elapsed playing time.
A - B
DVD
VCD
Repeat A-B
2. Press v / V to select the time clock icon and
“-:--:--” appears.
To repeat a sequence.
1. Press REPEAT A-B at your chosen starting
3. Input the required start time in hours, minutes,
and seconds from left to right. If you enter the
wrong numbers, press CLEAR (0000) to
remove the numbers you entered. Then input
the correct numbers.
point. “ A - ” appears briefly on the TV screen.
2. Press REPEAT A-B again at your chosen end
point.
“A - B” appears briefly on the TV screen and
the repeat sequence begins.
4. Press ENTER / OK to confirm. Playback starts
from the selected time.
3. Press REPEAT A-B again to cancel.
DVD
VCD
Zoom
DVD
VCD
Marker Search
To enter a Marker
Use zoom to enlarge the video image.
1. Press ZOOM during playback or still playback
to activate the Zoom function. The square
frame appears briefly in the right bottom of the
picture.
You can start playback from up to nine memo-
rized points. To enter a marker, press MARKER
at the desired point on the disc. The Marker icon
appears on the TV screen briefly. Repeat to enter
up to nine markers.
2. Each press of ZOOM changes the TV screen
in the sequence: 100% size → 150% size →
200% size → 300% size → 400% size →
100% size
To Recall or Clear a Marked Scene
1. During disc playback, press SEARCH. The
marker search menu appears on the screen.
3. Use the b B v V buttons to move through the
2. Within 10 seconds, press b / B to select a
zoomed picture.
marker number that you want to recall or clear.
4. To resume normal playback, press ZOOM
repeatedly or CLEAR (0000) button.
3. Press ENTER / OK and playback starts from
the marked scene. Or, Press CLEAR (0000)
and the marker number is erased from the list.
Note:
4. You can play any marker by inputting its num-
ber on the marker search menu.
Zoom may not work on some DVDs or VCDs.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
VCD
Changing the Audio Channel
Special DVD Features
Press A.MONITOR repeatedly during playback to
hear a different audio channel (Stereo, Left,
Right).
Checking the contents of DVD discs:
Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press
DISC MENU. Input the corresponding number or
use the b B v V buttons to highlight your selec-
tion. Then press ENTER / OK.
DVD
VCD
CD
Last Scene Memory
This player memorizes last scene from the last
disc that is viewed. The last scene remains in
memory even if you remove the disc from the
player or switch off the player. If you load a disc
that has the scene memorized, the scene is auto-
matically recalled.
DVD
Title Menu
1. Press TITLE. If the current title has a menu,
the menu appears on the screen. Otherwise,
the disc menu may appear.
Note:
This player does not memorize the scene of a disc if you
switch off the player before commencing to play the
disc.
2. The menu offers features such as camera
angles, spoken language and subtitle options,
and chapters for the title.
3. Press TITLE to exit.
Screen Saver
DVD
Disc Menu
The screen saver appears when you leave the
DVD+VCR in Stop mode for about five minutes.
Press DISC MENU and the disc menu is dis-
played.
Press DISC MENU again to exit.
Note:
If here the sound from line out (or RF out) only, do not
select the dts sound; there is no audio from line out (or
RF out) when select the dts sound mode.
DVD
Camera Angle
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback. Press ANGLE
repeatedly during playback to select a desired
angle. Note that the number of the current angle
appears on the display.
Tip:
The Camera Angle icon is displayed on the TV screen
when alternate angles are available.
DVD
Changing the Audio Language
Press A.MONITOR repeatedly during playback to
hear a different audio language or audio track.
DVD
Subtitles
Press SUBTITLE repeatedly during playback to
see the different subtitle languages.
Note:
If there is no information,
is displayed.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display - DVD
Maintenance and Service
You can display the general playback status on
the TV screen. Some items can be changed using
the menu. To use the on-screen display:
Refer to the information in this chapter before
contacting a service technician.
Handling the Unit
1. Press DISPLAY during playback.
2. Press v / V to select an item.
When shipping the unit
The selected item is highlighted.
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
3. Press b / B to change the setting. You can
also use the number buttons if appropriate
(e.g. inputting the title number). For some
functions, press ENTER / OK to execute the
setting.
Keeping the exterior surfaces clean
•
Do not use volatile liquids such as insecticide
spray near the unit.
Notes:
•
•
•
Some discs may not provide all of the features
shown below.
•
Do not leave rubber or plastic products in con-
tact with the unit for a long period of time.
since they leave marks on the surface.
If no button is pressed for 10 seconds, the on-
screen display disappears.
If
is displayed, action prohibited or not available.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth light-
ly moistened with a mild detergent solution.
Example: On-Screen Display during
playing DVD Video
Do not use strong solvents such as alcohol, ben-
zine, or thinner, as these might damage the sur-
face of the unit.
Selection Method
Items
b / B, Numbers
ENTER / OK
Title Number
Maintaining the Unit
b / B, Numbers
ENTER / OK
Chapter Number
Time search
The DVD+VCR is a high-tech, precision device. If
the optical pick-up lens and disc drive parts are
dirty or worn, the picture quality could be dimin-
ished.
Numbers,
ENTER / OK
Depending on the operating environment, regular
inspection and maintenance are recommended
after every 1,000 hours of use.
For details, please contact your nearest author-
ized service center.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an Audio CD Disc
Audio CD Disc Features
Audio CD
CD
Pause
Once you insert an Audio CD a menu appears on
the TV screen. Press v / V to select a track then
press PLAY (N) or ENTER / OK and playback
starts.
1. Press PAUSE (
X) during playback.
2. To return to playback, press PLAY (N) or
press PAUSE ( ) again.
X
CD
Moving to another Track
1. Press SKIP (> or .) briefly during play-
back to go to the next track or to return to the
beginning of the current track.
2. Press SKIP (.) twice in quick successions
to go back to the previous track.
3. You can play any track by inputting its num-
ber.
CD
Repeat Track / All / Off
You can play a track/all on a disc.
1. Press REPEAT when playing a disc. The
repeat icon appears.
2. Press REPEAT to select a desired repeat
mode.
• Track: repeats the current track.
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Note:
If you press SKIP (>) once during Repeat Track
playback, the repeat playback will be cancelled.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Search
Programmed Playback
1. Press REW (m) or FF (M) during playback.
The program function enables you to store your
favorite tracks from any disc in the player
memory.
2. Press REW (m) or FF (M) repeatedly to
select the required speed:
X2, X4 and X8 backward or forward.
A program can contain 30 tracks.
3. To exit SEARCH mode, press PLAY (N).
1. Insert a disc.
AUDIO CD menu appears.
CD
Random
2. Press PROGRAM.
E
1. Press RANDOM during playback. Random
Playback begins immediately and “Random”
appears on the menu screen.
The
mark will appear to the right of the
word “Program” on the right side of the menu
screen.
2. To return to normal playback, press RANDOM
repeatedly until “Random” disappears from the
menu screen.
Tip:
By pressing SKIP (> or .) during random playback,
the unit selects another track and resumes random play-
back.
CD
Audio CD Program Menu
Repeat A-B
1. To repeat a sequence during disc playback
press REPEAT A-B at your chosen starting
point. The Repeat icon and “A -” appear on the
menu screen.
Note:
E
Press PROGRAM again, the
mark will
disappear to exit the Program Edit mode.
3. Select a track on the “List”, then press ENTER
/ OK to place the selected track on the
“Program” list. Repeat to place additional
tracks on the list.
2. Press REPEAT A-B again at your chosen end
point. The Repeat icon and “A-B” appear on
the menu screen, and the sequence begins to
play repeatedly.
4. Press B.
3. To exit the sequence and return to normal
play, press REPEAT A-B again. The Repeat
icon disappears from the menu screen.
Select the track you want to start playing on
the “Program” list.
5. Press PLAY (N) or ENTER / OK to start.
Playback begins in the order in which you pro-
grammed the tracks. Playback stops after all
of the tracks on the “Program” list have played
once.
6. To resume normal playback from programmed
playback, select a track of AUDIO CD list and
then press PLAY (N).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat Programmed Tracks
1. Press REPEAT when playing a disc. The
repeat icon appears.
2. Press REPEAT to select a desired repeat
mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off (No display): does not play repeatedly.
Note:
If you press SKIP (> ) once during Repeat Track
playback, the repeat playback will be cancelled.
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
E
mark will appear.
2. Use B / v / V to select the track that you wish
to erase from the Program list.
3. Press CLEAR (0000). Repeat to erase addi-
tional tracks on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
E
mark will appear.
2. Use B / v / V to select “Clear All” in the
“Program” list, then press ENTER / OK.
Note:
The programs are also cleared when the disc is
removed.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
Slide Show
Viewing a JPEG Disc
Using this DVD+VCR you can view discs with
JPEG files.
Use v V b B to highlight the
then press ENTER / OK.
(Slide Show)
1. Insert a disc and close the tray. The PHOTO
menu appears on the TV screen.
JPEG
Still Picture
1. Press PAUSE (X) during slide show.
The player will now go into PAUSE mode.
2. To return to the slide show, press PLAY (N)
or press PAUSE (X) a gain.
JPEG
Moving to another File
Press SKIP (> or .) or cursor (b or B) once
while viewing a picture to advance to the next or
previous file.
JPEG
Zoom
Use zoom to enlarge the photo image. (see page
28)
2. Press v / V to select a folder, and press
ENTER / OK. A list of files in the folder
appears.
If you are in a file list and want to return to the
previous Folder list, use the v / V buttons on
To rotate picture JPEG
Press v / V during showing a picture to rotate the
picture clockwise or counter clockwise.
the remote to highlight
/ OK.
and press ENTER
3. If you want to view a particular file, press v / V
to highlight a file and press ENTER / OK or
PLAY (N). The selected file will appear for
viewing.
JPEG disc compatibility with this player
is limited as follows:
While viewing a file, you can press STOP (x)
to move to the previous menu (PHOTO
menu).
• Depending upon the size and number of
JPEG files, it could take a long time for the
DVD+VCR to read the disc’s contents. If you
don’t see an on-screen display after several
minutes, some of the files may be too large —
reduce the resolution of the JPEG files to less
than 5760 (Horizontal) x 3840 (Vertical) pixels
and burn another disc.
Tips:
•
Information and user guidance regarding the current
image is displayed in the lower part of the screen.
You can toggle this bar on and off using RETURN
(O).
•
There are three Slide Speed options
>>> (Fast), >> (Normal) and > (Slow)
Use v V b B to highlight the Speed. Then, use b /
B to select the option you want to use then press
ENTER / OK.
:
• The total number of contents on the disc
should be less than 1500 files and 300 fold-
ers.
• Some discs may be incompatible due to a dif-
ferent recording format or the condition of
disc.
• Ensure that all the selected files have the
“.jpg” extensions when copying into the CD
layout.
• If the files have “.jpe” or “.jpeg” extensions,
please rename them as “.jpg” file.
• File names without “.jpg” extension will not be
able to be read by this DVD+VCR. Even
though the files are shown as JPEG image
files in Windows Explorer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference
Language Codes
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Aymara
Azerbaijani
Bashkir
Basque
Bengali; Bangla 6678
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Code
6566
6565
6570
8381
6577
6582
7289
6583
6588
6590
6665
6985
Language
Fiji
Finnish
French
Code
7074
7073
7082
7089
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
Language
Lingala
Lithuanian
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Code
7678
7684
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
Language
Singhalese
Slovak
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Code
8373
8375
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Frisian
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto 8083
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance 8277
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian 8372
Shona
Sindhi
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7065
8076
8084
8185
Turkish
Turkmen
Twi
Ukrainian
Urdu
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
8279
8285
8377
8365
7168
8382
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Danish
Dutch
English
Esperanto
Estonian
Faroese
8378
8368
Latvian, Lettish 7686
Area Codes
Choose an area code from this list.
Area
Code
AF
AR
AU
AT
Area
Ethiopia
Fiji
Code
ET
FJ
Area
Code
MY
MV
MX
MC
MN
MA
NP
Area
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Code
SA
SN
SG
SK
SI
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
Malaysia
Maldives
Mexico
Monaco
Mongolia
Morocco
Nepal
Netherlands
Netherlands Antilles AN
New Zealand
Nigeria
Norway
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
BE
BT
ZA
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
KR
ES
LK
NL
NZ
NG
NO
OM
PK
PA
PY
PH
PL
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
Oman
Pakistan
Panama
Paraguay
Philippines
Poland
Portugal
Romania
Russian Federation RU
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
KE
KW
LY
LU
Kuwait
Libya
Luxembourg
PT
RO
El Salvador
Zimbabwe
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Check the following guide for the possible cause of a problem before contacting service.
Cause
Correction
Symptom
No power.
ꢀ The power cord is disconnected.
ꢀ Plug the power cord into the wall
outlet securely.
ꢀ DVD or VCR button is not switched
properly.
ꢀ Refer to page 7.
The power is on, but
the DVD+VCR does
not work.
ꢀ Insert a disc or tape. (Check that
the disc or tape indicator in the dis-
play window is lit.)
ꢀ No disc is inserted.
ꢀ No tape is inserted.
ꢀ The TV is not set to receive DVD+
VCR signal output.
ꢀ Select the appropriate video input
mode on the TV so the picture from
the DVD+VCR player appears on
the TV screen.
No picture.
ꢀ The video cable is not connected
securely.
ꢀ Connect the video cable into the
jacks securely.
ꢀ Wrong connection.
ꢀ Check the connection.
ꢀ The equipment connected with the
audio cable is not set to receive
DVD+VCR signal output.
ꢀ Select the correct input mode of
the audio receiver so you can listen
to the sound from the DVD+VCR.
No sound.
ꢀ The audio cables are not connected
securely.
ꢀ Connect the audio cable into the
jacks securely.
ꢀ The power of the equipment connect-
ed with the audio cable is turned off.
ꢀ Turn on the equipment connected
with the audio cable.
ꢀ The AUDIO options are set to the
wrong position.
ꢀ Set the AUDIO options to the cor-
rect position.
ꢀ The disc is dirty.
ꢀ Clean the disc.
The playback picture
is poor.
ꢀ The TV channels are not tuned in
properly.
ꢀ Check tuning, carry out tuning
again.
ꢀ Tape heads are dirty.
ꢀ Clean video heads.
ꢀ Tape is a rental or was recorded on
another VCR.
ꢀ Use CH -/+ for manual tracking
adjustment while tape is playing.
ꢀ This unit can only output 525p
Progressive scan picture.
ꢀ Make sure that your TV can sup-
port 525p Progressive scan picture
or set Progressive scan to off.
ꢀ Keep pressing STOP (x) for more
than 5 seconds.
The “PROGRESSIVE ꢀ DVD+VCR was turned off while set-
SCAN MODE”
ting the Progressive scan mode.
message remains to
be displayed.
ꢀ The Progressive Scan is set to On on
the setup menu but is connected to a
standard(analog) television with com-
ponent video input.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Cause
Correction
Symptom
ꢀ An unplayable disc is inserted.
ꢀ Insert a playable disc. (Check the
disc type and Regional code.)
The DVD+VCR does
not start playback.
ꢀ The disc is placed upside down.
ꢀ Place the disc with the playback side
down.
ꢀ The disc is not placed within the
guide.
ꢀ Place the disc on the disc tray cor-
rectly inside the guide.
ꢀ The disc is dirty.
ꢀ Clean the disc.
ꢀ Is the cassette compartment
empty?
ꢀ Eject the tape in.
Video tape cannot be
inserted.
ꢀ Audio mode is not set properly.
ꢀ Select STEREO by repeatedly
pressing A.MONITOR on the
Remote Control.
No Hi-Fi sound
ꢀ There is an obstacle in the path of
the Remote Control and this unit.
ꢀ Remove the obstacle.
The Remote Control
does not work
properly.
ꢀ The batteries in the Remote Control
are exhausted.
ꢀ Replace the batteries with new ones.
ꢀ The Remote Control is not pointed
at the remote sensor of the
DVD+VCR.
ꢀ Point the Remote Control at the
remote sensor of the DVD+VCR.
ꢀ The Remote Control is too far from
the DVD+VCR.
ꢀ Operate the Remote Control within
23ft (7m).
ꢀ This Remote Control use the same
buttons for VCR and DVD functions
(ex.PLAY).
ꢀ When using a VCR, first press the
VCR button. When using a DVD, first
press the DVD button.
ꢀ The Remote Control of a JVC TV or ꢀ Use the DVD+VCR’s Remote
Receiver cannot operate the DVD+
VCR.
Control.
Camcorder image is
not shown.
ꢀ Camcorder is off.
ꢀ Turn camcorder on and operate
properly.
Camcorder image via ꢀ DVD+VCR SOURCE SELECT is
ꢀ Press AUX to select LINE input
channel (LINE1 or LINE2).
AV input to
not set to LINE1 or LINE2.
DVD+VCR is not
shown on TV screen.
Timer recording is not ꢀ Clock in DVD+VCR is not set to
ꢀ Set clock to correct time.
ꢀ Reprogram Timer.
possible.
correct time.
ꢀ Timer has been programmed
incorrectly.
ꢀ
indicator light does not appear
after programming timer.
ꢀ Reprogram Timer and turn
DVD+VCR off to enable timer.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
General
Power requirements
120 V, 60 Hz
Power consumption
16 W ✬❖O❉◗ ON✭
✴✲✼ ✬❘❙❅N❈❆ ❧o❝❞✭
16.9" X 3.1" X 10.4" (430 X 78.5 X 265 mm) (w x h x d)
9.24 lbs (4.2 kg)
Dimensions (approx.)
Weight (approx.)
Operating temperature
Operating humidity
Signal system
5˚C to 40˚C (41˚F to 104˚F)
5 % to 90 %
NTSC
Inputs
ANTENNA IN
VHS VIDEO IN(LINE1, 2)
VHS AUDIO IN(LINE1, 2)
75 ohms (VHF/UHF/CATV)
1 V (p-p) 75 ohms, sync negative, RCA jack x 2
-6.0 dBm more than 47 ohms, RCA jack (L, R) x 2
Outputs
VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
Audio output (digital audio)
Audio output (analog audio)
RF OUT
1 V (p-p) 75 ohms, sync negative
(Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 ohms, RCA jack x 2
0.5 V (p-p), 75 ohms, RCA jack x 1
2.0 Vrms (1 KHz, 0 dB), 600 ohms, RCA jack (L, R) x 1
Channel 3 or 4 (Adjustable)
VCR Specifications
Head system
Timer
Tape speed
Tape width
Four head helical scan azimuth system
12-hour display type with AM, PM
SP: 33.35 mm/sec, LP: 16.67 mm/sec, SLP: 11.12 mm/sec
12.7 mm
Maximum recording time
Rewind time
SP: 2 HOURS (T-120), SLP: 6 HOURS (T-120)/8 HOURS (T-160)
About 3 minutes (T-120)
Channel coverage
Frequency range
Signal-to-noise ratio
Dynamic range
VHF: 2-13, UHF: 14-69, CATV: 1-125 (4A, A-W, W+1 - W+84, A-5 - A-1)
20 Hz to 20 kHz
More than 43 dB
More than 88 dB
Channel separation
More than 60 dB
DVD Specifications
Laser system
Frequency response
Semiconductor laser, wavelength 650 nm
DVD (PCM 96 kHz): 8 Hz to 44 kHz,
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio
Harmonic distortion
Dynamic range
More than 100 dB (ANALOG OUT jacks only)
Less than 0.008%
More than 95 dB (DVD/CD)
Accessories:
RF 75-ohm Coaxial Cable x 1, Remote control x 1, Batteries (R03/AAA) x 2
• Design and specifications are subject to change without prior notice.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty (Only in U.S.A.)
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in Indonesia
0605STH-MW-OT
US
Download from Www.Somanuals.com. All Manuals Search And Download.
|