User Guide
Blu-Ray Disc Player
NS-BRDVD3-CA
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Viewing available BD-Live storage space . . . . . . . . . . . . . . . . . . . . . . . . . 15
Erasing BD-Live storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting the screen saver activation time . . . . . . . . . . . . . . . . . . . . . . . . . 16
Maintaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
General guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Electrical disturbance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Condensation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Storing discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Handling discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Cleaning discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Resetting your player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
TV screen and video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
HDMI connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
BD-Live and USB connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Other playback problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
System and outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Video file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MP3/WMA audio file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . 21
Photo file requirement (USB/DISC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Legal notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
One-year limited warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert you to the presence of uninsulated
dangerous voltage within your player’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilateral triangle is intended
to alert you to the presence of important operating and
maintenance (servicing) instructions in the literature that came
with your player.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
This symbol is the symbol for CLASS II (Double Insulation).
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
Warning
14 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as
Your player employs a laser system.
Use of controls, adjustments, or the
performance of procedures other
than those specified may result in
hazardous radiation exposure.
Visible laser radiation is present when open and
interlocks defeated. Do not stare into the beam.
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Disposal of your old appliance
15 To reduce the risk of fire or electric shock, do not
expose this device to rain, moisture, dripping, or
splashing, and no objects filled with liquids,
such as vases, shall be placed on it.
16 An apparatus with a three-prong,
grounding-type plug is a Class I apparatus,
which needs to be grounded to prevent
possible electric shock. Make sure that you
connect this Class I device to a grounding-type,
three-prong outlet.
1. When this crossed-out wheeled bin symbol is attached to a
product, it means the product is covered by the European
Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.
17 The wall plug is the disconnecting device. The
plug must remain readily operable.
18 Keep a minimum distance of 4 inches (10cm)
around the apparatus for sufficient ventilation.
19 Do not install this equipment in a confined
space such as book case or similar unit. The
ventilation should not be impeded by covering
the ventilation openings with items such as
newspaper, table-cloths, or curtains.
Important safety
instructions
1 Read these instructions.
20 Batteries should not be exposed to excessive
heat such as sunshine, fire, or the like.
2 Keep these instructions.
3 Heed all warnings.
Caution
Danger of explosion if battery is incorrectly replaced. Replace
only with the same or equivalent type.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Blu-Ray Disc Player
#
Item
Description
Insert a disc with the label side up into this tray. To
open or close the tray, press (open/close).
Introduction
3
Disc tray
Congratulations on your purchase of a high-quality
Press to open or close the disc tray.
Insignia product. Your NS-BRDVD3-CA represents
the state of the art in Blu-ray Disc player design and
is designed for reliable and trouble-free
performance.
4
5
6
(open/close)
VFD screen
Displays status information.
Press to start or pause playback.
(play/pause)
Press to stop playback. The Setup menu is displayed.
Features
To resume playback, press
or to select
DVD/BD-ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
• Full high-definition video playback at up to 1080p
resolution for an amazing viewing experience.
7
(stop)
• Upconversion of standard definition DVDs for
enhanced picture quality at up to 1080p over an
HDMI connection.
• Deep color
• Rich multi-channel surround sound.
• Easy and simple HDTV connection using a single
HDMI cable (cable not included).
• Multiple outputs for connecting your home
theater system or amplifier.
• PIP functionality that lets you display primary and
secondary video at the same time (if available on
the Blu-ray Disc).
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
Press to go to the previous title, chapter, or track.
8
9
(previous)
Press to go to the next title, chapter, or track.
Receives signals from the remote control. Do not block.
Connect a USB flash drive to this port.
(next)
10
11
Remote control sensor
USB port
Back
• Pop-up menu display without interrupting
playback (if available on the Blu-ray Disc).
4
• HDMI 1080p/fps output (Blu-ray Disc only) that
provides smooth playback of video with a frame
rate of 60 frames per second (TV must be
connected with an HDMI cable and be compatible
with an HDMI cable and be compatible with
1080p 60 frame).
VIDEO OUT
VIDEO
AUDIO OUT
L
R
Manufactured:
C
U
C
C
N
O
L
N
S
F
T
T
S
O
D
R
M
S
0
T
O
U.S Patent Nos. 6,836,549; 6,381,747;
.
Blu-ray
DVD-Video
.
6
0
6
5
C
M
E
S
R
I
F
I
E
D
C
T
O
2
Manufactured under license under
U.S Patent #'s 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535
other U.S . and worldwide patents
issued pending. DTS is regist-
ered trademark the DTS logos
7,050,698; 6,516,132; and 5,583,936.
A
6
T
0
D
.
2
.
2
.
:
o
.
0
6
5
C
U
S
This device complies with part 15 of
the FCC rules. peration is subject
to the following two conditions:
(1) This device ay not cause harmful
interference, and
(2) This device ust accept any inter-
ference received, including inter-
&
BLU-RAY DISC PLAYER
AC: 110V-120V~ 50/60Hz
COAXIAL
This device complies with 21 CFR chapter 1,
O
3
1
8
1
3
7
2
subchapter
J
.
Applicable at the date of
MODEL: NS-BRDVD3
Manufactured for Insignia Products
7601 Penn Ave S . Richfield, MN 55423 US A
m
a nufa c ture.
&
a
m
Manufactured under license
fromDolb Laboratories. Do-
lb and the double-D symbol
are trademarks of Dolb
Laboratories.
&
y
R
I
S
K
O
F
DO
E
L
N
E
O
C
T
T
O
R
I
P
C
E
S
N
H
L
O
E
C
C
K
m
This Class
B
digital apparatus complies with
and Symbol are trademarks of DTS,
Inc. 1996-2008 DTS , Inc. All Rights
Reserved.
y
Canadian ICES-003. Cet appareil num rique
de la classe est conform la norm
NMB -003 du Canada.
POWER: 25W
MADE IN CHINA
y
R
I
S
Q
U
E
C
P
H
A
O
C
S
E
O
T
R
R
I
Q
U
E
N
E
CB
/
PB
CR
/
PR
OPTICAL
ference that ay cause undesired
operation.
m
Y
S/N:
B
e
e
HDMI
ETHERNET
U
V
R
I
COMPONENT VIDEO OUT
DIGITAL OUT
5
8
1
2
7
3
6
Package contents
• Blu-ray Disc player
• A/V cable
• Remote control
• AAA batteries (2)
• User Guide
#
Item
Description
Plug the power cord into a power outlet.
1
Power connector
VIDEO OUT
Connect a TV to this jack and to the AUDIO OUT L/R
jacks using a composite video cable (provided).
2
3
4
Connect a TV to these jacks and to the AUDIO OUT L/R
jacks using a component video cable and audio cable.
Front
COMPONENT VIDEO OUT
AUDIO OUT L/R
Connect the audio for a composite TV or component
video TV to these jacks.
Connect a TV to this jack using an HDMI cable. An
HDMI cable carries both video and audio. You do not
need to make an audio connection.
5
6
7
8
HDMI
Connect an ethernet cable to this jack and to a
broadband Internet jack to download BD-Live
information.
2
4
5
1
6
9 10
11
3
7
ETHERNET
8
Connect an optical digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
OPTICAL DIGITAL OUT
COAXIAL DIGITAL OUT
#
Item
Description
Connect an coaxial digital amplifier to this jack to play
the sound from the TV through the amplifier’s
speakers.
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
1
2
(standby/on)
Lights blue when your player is turned off (standby
mode).
Turned off when your player is turned on.
Power indicator
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Remote control
#
Item
Description
Press to stop playback. The Setup menu is displayed.
To resume playback, press
or to select
DVD/BD-ROM, then press ENTER. Depending on the
disc, playback starts where it stopped or at the
beginning of the disc.
7
(stop)
If you press (stop) twice, playback stops
completely. To start playback again, press
(play/pause).
Press to repeat the current title, chapter, track, or
repeat all. For more information, see “Repeating a
title, chapter, or CD track” on page 9.
8
9
REPEAT
RESOLUTION
A-B
Press to select the video resolution. For more
information, see “Selecting the video output
resolution” on page 12.
Press to create a playback loop. For more information,
see “Creating a playback loop on a DVD or audio CD”
on page 9.
10
During DVD playback, press to open the DVD root
menu where you can select DVD playback options.
(This button is valid for DVDs that have a multi-layer
menu.)
11
12
DISC MENU
If a disc menu opens when playing a Blu-ray Disc or
During media file browsing, press to select a file on the
popup menu, then press ENTER.
When a menu is open, press to select an option, then
press ENTER.
Press to confirm selection in a menu.
13
14
ENTER
SETUP
Press to open the setup menu where you can adjust
options.
Press to select a subtitle language or to turn subtitles
off.
15
16
SUBTITLE
When playing a Blu-ray Disc that has a Java™
application, press to control playback. For more
information, see the documentation that came with
the Blu-ray Disc.
A (red), B (green),
C (yellow), D (blue)
Press to turn PIP (picture-in-picture) mode on or off.
For more information, see “Using PIP
17
#
Item
Description
PIP
(picture-in-picture) mode” on page 10.
Press to turn on your player or put your player in
standby mode. When your player is in standby mode,
power is still entering your player. To disconnect
power, unplug the power cord.
Press to open or close the disc tray.
18
19
20
21
OPEN/CLOSE
CLEAR
1
STANDBY/ON
Press to clear an input error.
In playback mode, press SEARCH, then press the
number buttons to enter a title, chapter, track, or time.
In menu mode, press to enter the parental code
password.
Press to go to the next title, chapter, or track.
Press to go to the previous title, chapter, or track.
(next)
2
3
Number buttons
SEARCH
(previous)
Press to advance one frame at a time. Press
(play/pause) to resume normal playback.
Press to search for a title, chapter, or specific time on a
disc. For more information, see “Searching for a title,
chapter, or elapsed time” on page 9.
22
23
(step)
(play/pause)
ANGLE
Press to start or pause playback.
Press to fast reverse. Each time you press this button,
the fast-reverse speed decreases from Fast x 2,
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,
Fast x 128. Press
playback.
Press to select a viewing angle if multiple angles are
available on the disc. For more information, see
“Selecting a viewing angle” on page 10.
4
24
25
(fast reverse)
(play/pause) to resume normal
DISPLAY
Press to display disc information.
Press to fast forward. Each time you press this button,
the fast-forward speed increases from Fast x 2,
Fast x 4, Fast x 8, Fast x 16, Fast x 32, Fast x 64,
Fast x 128. Press
playback.
During Blu-ray Disc playback, press to open a menu
that lets you control Blu-ray Disc playback.
During DVD playback, press to open the DVD menu (if
available). For more information, see “Using a disc
popup menu” on page 10.
5
6
(fast forward)
ZOOM
POPUP MENU/
TITLE MENU
26
(play/pause) to resume normal
Press to zoom in on a video. Each time you press this
button, the magnification level changes. This button is
only used for DVD discs.
27
28
RETURN
AUDIO
Press to return to the previous menu.
Press to select the audio mode. For more information,
see “Selecting the audio mode” on page 10.
In PIP mode, press to turn the audio for the secondary
video on or off. For more information, see “Using PIP
(picture-in-picture) mode” on page 10.
29
SECONDARY AUDIO
3
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Connecting a TV using an HDMI cable (best)
Setting up your player
To connect a TV using an HDMI cable:
• Connect an HDMI cable to the HDMI jack on
the back of your player and to the HDMI IN
jack on the TV.
Installing remote control batteries
To install remote control batteries:
1 Remove the battery compartment cover.
TV
2 Insert two AAA batteries into the battery
compartment. Make sure that the + and –
symbols on the batteries match the + and –
symbols in the battery compartment.
Back of player
Notes
•
•
Only the HDMI is capable of 1080i/1080p video
output and the highest definition audio codes.
An HDMI cable carries both video and audio. If
you want to use TV speakers, you do not need to
make an audio connection. If you want to use an
audio receiver, connect an HDMI cable between
your player and the HDMI input jack on the
receiver. Then connect a second HDMI cable
between the HDMI output jack on the receiver
and the HDMI input jack on the TV.
3 Replace the battery compartment cover.
Notes
•
•
•
•
Make sure that you insert the batteries correctly.
Do not heat, open, or short-circuit batteries.
Do not throw batteries into a fire.
Do not mix different types of batteries or mix
old and new batteries.
•
•
Do not try to recharge non-rechargable
batteries.
If the remote control does not function correctly
or if the operating range becomes reduced,
replace the batteries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Using an analog audio receiver
Connecting a TV using a component video
cable (better)
To connect a component-capable TV to an
analog audio receiver:
Notes
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
The following task shows connecting the audio to a
receiver. If you want to use the TV speakers instead of
a receiver, connect the audio cable to the TV’s audio
in jacks on the TV.
Analog audio receiver
Using an digital audio receiver
To connect a component-capable TV to a digital
audio receiver:
1 Connect a component video cable to the
COMPONENT VIDEO OUT jacks on the back of
your player and to the COMPONENT VIDEO IN
jacks on the TV.
Audio cable
Back of player
Digital audio receiver
Connect the OPTICAL DIGITAL OUT jack
OR
COAXIAL DIGITAL OUT jack
Back of player
Component video cable
Component video cable
TV
2 Connect an audio cable to the AUDIO OUT L/R
jacks on the back of your player and to the
AUDIO IN L/R jacks on the receiver.
3 Connect a second audio cable to the AUDIO
OUT L/R jacks on the recevier and to the AUDIO
IN L/R jacks on the TV.
TV
2 Connect a digital optical cable to the OPTICAL
DIGITAL OUT jack on the back of your TV and to
the OPTICAL DIGITAL IN jack on the receiver.
Or
Connect a digital coaxial cable to the COAXIAL
DIGITAL OUT jack on the back of your TV and to
the COAXIAL DIGITAL IN jack on the receiver.
3 Connect a second optical or digital cable to the
DIGITAL OUT jack on the receiver and to the
DIGITAL IN jack on the TV.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Connecting a TV using an A/V cable (good)
Using your player
To connect a TV using an AV cable:
• Connect an A/V cable to the VIDEO OUT and
AUDIO OUT L/R jacks on the back of your
player and to the VIDEO IN and AUDIO IN L/R
jack on the TV. Jacks and cable connectors are
usually color-codes. Make sure that you match
the colors.
Note
Unless otherwise noted, all tasks in this section are
based on using the remote control.
Playable discs
TV
Disc type
Logo
Disc type
Logo
Blu-ray Disc
DVD-R
DVD-video
(DVD-ROM)
Audio CDs (CDDA)
DTS-CD
DVD-RAM
Yellow=Video
White=Left audio
Red=Right audio
DVD-RW
MP3/WMA/
JPEG/Data CD
Notes
•
•
•
Writeable DVD discs (DVD-RAM, DVD-RW,
DVD-R) must be finalized, VR-mode only.
Your player supports discs that are compatible
with DVD-RAM Standard Version 2.0.
Playback may not work for some types of discs,
or when specific operations, such as angle
change and aspect ratio adjustment, are being
performed. Information about the discs is
written in detail on the box.
Do not allow the disc to become dirty or
scratched. Fingerprints, dirt, dust, scratches or
deposits of cigarette smoke on the recording
surface may make it impossible to use the disc
for playback.
Back of player
•
Connecting a USB flash drive
To connect a USB flash drive:
• Plug the USB flash drive into the USB port on the
•
•
CD-R/-RW, DVD-RAM/-RW/-R recorded with UDF
or ISO9660 format can be played back.
Windows Media Audio (WMA) files must be
written to the disc with a .wma file extension in
order to be recognized and played back
correctly.
High bitrate or variable bitrate .wma files may
not play back correctly.
JPEG picture files must be written to the disc
with a .jpeg or .jpg file extension in order to be
recognized and played back correctly.
front of your player.
Connecting to the Internet
To connect to the Internet:
• Connect a network cable into the INTERNET jack
on the back of your player and into a network
jack.
•
•
About Blu-ray Discs
The massive storage capacity of a Blu-ray Disc
allows a higher standard of picture and audio
quality and a wealth of special effects and
enhanced features not available on DVDs.
Java
Your player features Java support so you can get the
most out of the latest Blu-ray Discs. When a Blu-ray
Disc loads, explore the title menu to enjoy these
extra features.
HDMI
HDMI is the only domestic medium capable of
transmitting the huge volumes of data required by
the high picture resolutions and advanced digital
audio codecs that make Blu-ray such an exciting
medium.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Playing Blu-ray Discs
• To go to the previous chapter, press
within
any
two seconds after the current chapter starts. To go
Playing Blu-ray Discs are a lot like playing DVDs,
to the beginning of the chapter, press
except Blu-ray Discs have a higher level of
time after playing the first five seconds of the
interactivity.
chapter.
Most of the standard features of DVD playback work
the same with Blu-ray Disc playback. The two most
common exceptions are:
• Resume play—Not available on Blu-ray Java discs
• A-B repeat (playback loop)—Not available on
some Blu-ray Discs
• To go to the next chapter, press
• To play one frame at a time, press
.
(step). Each
time you press this button, the video advances
one frame. Press
normal playback.
(play/pause) to resume
Color buttons
Playing files on a data disc or USB memory
stick
The red, green, yellow and blue buttons on the
remote control are used with interactive menus
when operating a Blu-ray Disc that includes Java™
applications. For more information about using this
kind of disc, see the instructions that came with the
disc.
When you insert a data disc or USB memory stick
containing picture, music, or video files into your
player, icons are added to the menu to indicate that
video, music, or picture files are available for
playback.
Playing a Blu-ray Disc or DVD
To play a Blu-ray Disc or DVD:
1 Press STANDBY/ON.
2 Turn on the TV, then select the input setting on
the TV that matches the connection method
you used to connect your player.
Vid eos
Settings
3 Press OPEN/CLOSE to open the disc tray.
4 Place a disc on the disc tray with the label facing
up, then press OPEN/CLOSE to close the disc
tray. It may take a few seconds for the disc to
load.
Music
Pictures
5 If a Blu-ray Disc or DVD menu opens, press
or to select PLAY, then press ENTER.
6 To eject the disc, press OPEN/CLOSE.
Controlling Blu-ray Disc or DVD playback
Note
To play audio or video files:
1 Press or to select Music or Videos, then
If
appears on the screen, the current action is not
press ENTER. A menu opens.
permitted by the disc or your player. For example,
many discs do not let you fast-forward through the
warning information at the beginning of the disc.
2 Press or to select Play Files, then press
ENTER. The Please select Play mode box opens.
To control Blu-ray Disc or DVD playback:
• To start or pause playback, press
(play/pause).
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
• To stop playback, press (stop). The Setup menu
is displayed. To resume playback, press
or to select DVD/BD-ROM, then press ENTER.
Depending on the disc, playback starts where it
stopped or at the beginning of the disc. If you
press (stop) twice, playback stops completely.
To start playback again, press
(play/pause).
Playback starts at the beginning of the disc.
• To fast-forward, press . Each time you press this
button, the fast-forward speed changes in the
following sequence: Fast x 2, Fast x 4, Fast x 8,
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press
(play/pause) to resume normal playback.
• To fast-reverse, press . Each time you press this
button, the fast-reverse speed changes in the
following sequence: Fast x 2, Fast x 4, Fast x 8,
Fast x 16, Fast x 32, Fast x 64, Fast x 128. Press
(play/pause) to resume normal playback.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
3 Press or to select Play All (plays all files) or
Play Selection (plays files added to the playlist),
then press ENTER. The file(s) play and the
following menu opens.
4 Press or to select Add to playlist, then
press ENTER. The file is added to the playlist.
Note
If the file you selected is already in the playlist,
Remove from playlist appears.
When you add a file to the playlist, Remove all
from playlist appears on the screen
automatically. You can use Remove all from
playlist, Previous Folder, Play Files, Browse
Pictures, and Now Playing to control playback.
• If you are playing music files and want to view
JPG picture files at the same time, press
RETURN, then press or to select Browse
Pictures, then press ENTER. Select the JPG
files you want to view.
• If you want to to see information about the file
that is playing, press or to select Now
Playing, then press ENTER. The following
display appears
Playing an audio CD
File 1/5 song1.mp3
Title: Cool Track
Artist: Ricardo Funiccio
Album: Dead Dux
To play an audio CD:
1 Press STANDBY/ON.
Play
0:02:00
0:30:00
Off
Off
2 Press OPEN/CLOSE to open the disc tray.
3 Place a CD on the disc tray with the label facing
up, then press OPEN/CLOSE to close the disc
tray. It may take a few seconds for the CD to
load.
4 Press ENTER to start playback.
5 To eject the CD, press OPEN/CLOSE .
Random play indicator
Repeat indicator
Play indicator
Controlling audio CD playback
To create a playlist:
1 Insert a disc or plug in a USB flash drive, select
Music, Videos, or Pictures, then press
2 Press or to select Optical Disc or USB, then
press ENTER. A file browser window opens with
a list of files and folders.
To control audio CD playback:
• To start or pause playback, press
The sound is muted when your player is in pause
mode. To resume normal playback, press
(play/pause).
(play/pause).
.
• To stop playback completely, press (stop) To
start playback again, press
(play/pause).
3 Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER. The following menu opens:
Playback starts at the beginning of the CD.
• To fast-forward, press . To resume normal
playback, press
• To fast reverse, press . To resume normal
playback, press (play/pause).
• To go to the previous track, press
next track, press
(play/pause).
. To go to the
.
• To select a track, press SEARCH, enter the track
number with the number buttons, then press
ENTER.
Or,
Enter the track number by pressing the
appropriate number buttons.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Displaying Blu-ray Disc information
Viewing photographs
Your player can display digital photograph files that
have been burned onto a data disc, DVD+/-R,
DVD+/-R/(W), or Blu-ray Disc.
Note
The information displayed for discs other than
Blu-ray Discs will be different.
To view photographs:
To display Blu-ray Disc information:
1 Insert the disc with photographs into your
• Press DISPLAY. Your player displays information
about the Disc, such as type of disc, current
elapsed time in title, total amount of time in title,
current chapter, and total number of chapters.
Blu-ray player. The following menu opens:
• Press DISPLAY again to close the display.
Searching for a title, chapter, or elapsed time
To search for a title, chapter, or elapsed time:
Vid eos
1 During playback, press SEARCH one or more
Settings
times to select a search mode.
• One press selects Goto Title - - - mode.
• Two presses selects Goto Chapter - - - mode.
Music
• Three presses selects Goto Time --: -- : --
mode.
Pictures
2 Press the number buttons to enter the title
number, chapter number, or time, then press
ENTER. Your player goes to the title, chapter, or
time you entered.
Repeating a title, chapter, or CD track
2 Press or to select Pictures, then press
ENTER. A menu opens.
To repeat a title, chapter, or CD track:
• Main Menu—Returns to the main menu.
• To repeat a title or chapter, press REPEAT one or
more times to select a repeat mode. You can
select Off, Repeat Title, Repeat Chapter, Repeat
track, Repeat all, or Random.
• Play Files—Open the Please Select Play Mode
box. Press or to select an option, then
press ENTER.
• Play All—Plays all files.
• Play Current Folder—Plays the current
JPG files.
Creating a playback loop on a DVD or
audio CD
• Browse Music—Opens the music playing
menu where you can select music files to
play while you view photographs.
Note
Blu-ray Discs do not normally support playback
loops.
• Now Playing—Opens a progress bar.
To create a playback loop:
To create a playlist:
1 Play the disc until you reach the point where
1 Insert a disc or plug in a USB flash drive, then
you want the loop to start, then press A-B.
press
.
2 Play the disc until you reach the point where
you want the loop to stop, then press A-B. Your
player plays the loop you created repeatedly.
2 Press or to select Optical Disc or USB, then
press ENTER. A file browser window opens with
a list of files and folders.
3 Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER.
3 Press A-B to cancel the loop and return to
normal playback.
4 Press . A menu appears.
5 Press or to select an option, then press
ENTER. You can select:
• Remove all from playlist—Deletes all files in
playlist.
• Previous folder—Returns the previous menu.
• Play files—Play all files or play files in the
playlist.
• Browse Music—Opens the music playing
menu where you can select music files to play
while you view photographs.
• Now playing—Opens a progress bar.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
To add a JPG file to the playlist:
Selecting the audio mode
1 Insert a disc or plug in a USB flash drive, then
To select the audio mode:
press
.
1 Press AUDIO. Your player displays audio channel
information, such as “01/03 Eng Dolby Digital.”
“01” indicates the currently selected audio
channel. “03” indicates the total number of
audio channels. “Eng” (English) indicates the
audio language. “Dolby Digital” describes the
currently selected audio format.
2 Press or to select Optical Disc or USB, then
press ENTER.
3 Press or to select a file or folder, then press
ENTER. If you selected a folder, the files in the
folder are displayed. Press or to select a file,
then press ENTER. The following menu opens:
2 Press to select an audio mode.
Selecting a viewing angle
Note
Add to playlist
Not all discs are recorded with multiple viewing
angles and not all scenes on a disc have multiple
viewing angles.
4 Press ENTER.
To select the viewing angle:
5 Press or to select Play File, then press
ENTER. The file starts playing.
6 During playback, press DISC MENU to open the
SLIDE SHOW menu where you can select the
slide show mode and picture switching time.
• During playback, press ANGLE. Your player
displays “Angle X of X.” “The first “X” indicates the
current viewing angle, and the second “X”
indicates the total number of viewing angles.
Selecting the on-screen menu language
Using PIP (picture-in-picture) mode
To select the on-screen menu language:
1 Press ENTER. The Settings menu opens.
Some Blu-ray Discs and DVDs are compatible with
picture-in-picture (PIP) mode. In PIP mode, the
primary video is displayed on the full screen, and
the secondary video is displayed in a small window.
Network
Language
Primary video
Display
OSD
English
Auto
Menu
Audio
Subtitle
Audio
Auto
Settings
None
Language
Parental
System
Secondary video
See the documentation that came with the disc for
playback instructions.
2 Press or to select Language. The Language
menu opens.
To use PIP mode:
1 Press PIP to turn PIP mode on or off.
2 If PIP mode is on, press SECONDARY AUDIO to
turn the audio for the video in the PIP window
on or off.
3 Press to select OSD, then press ENTER.
4 Press or to select the language you want,
then press ENTER. You can select English,
French, or Spanish.
5
Press to go to the previous menu.
Using a disc popup menu
Selecting the disc menu language
To use a disc popup menu:
To select the disc menu language:
1 Press ENTER. The Settings menu opens.
1 During Blu-ray or DVD playback, press
POPUP MENU/TITLE MENU. The Blu-ray popup
menu or DVD disc menu opens.
Network
Language
2 Press
ENTER.
or to select an option, then press
Display
OSD
English
Menu
Audio
Subtitle
Auto
Auto
None
Audio
Settings
Language
Parental
System
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
2 Press or to select Language. The Language
4 Press or to select the language you want,
then press ENTER.
menu opens.
3 Press , press or to select Menu, then press
ENTER.
4 Press or to select the language you want,
then press ENTER.
Notes
•
•
Not all languages are available on all discs.
Some discs do not let you select the subtitle
language from your player. Instead, you have to
select the subtitle language from the disc setup
menu (the menu that appears after you insert
the disc).
Notes
•
•
Not all languages are available on all discs.
Most discs only have one menu language.
You can also select the subtitle language from the
Subtitle menu in the on-screen menu.
5 Press to go to the previous menu.
Determining whether an HDMI TV is
connected
Selecting the audio language
To determine whether an HDMI TV is connected:
1 Press ENTER. The Settings menu opens.
To select the on-screen menu language:
1 Press ENTER. The Settings menu opens.
Parental
Network
Display
Language
Display
System
HDMI Status
C onnected
1080p (HDMI)
HDMI Auto
16:9 W ide
OSD
English
HDMI preferred Format
R es olution
Menu
Audio
Subtitle
Auto
Auto
None
Audio
Network
Display
Audio
Set ting s
Settings
TV Aspect
Language
Film Mode(1080p24)
Off
Parental
Language
System
2 Press or to select Display. The Display menu
2 Press or to select Language. The Language
opens.
menu opens.
If an HDMI TV is connected, Connected appears.
If an HDMI TV is not connected Disconnected
appears
3 Press , press or to select Audio, then press
ENTER.
4 Press or to select the language you want,
then press ENTER.
3 Press to go to the previous menu.
Notes
Automatically determining the best HDMI
resolution
•
•
Not all languages are available on all discs.
Some discs do not let you select the audio
language using your player’s menu. Instead, you
have to select the audio language from the disc
setup menu (the menu that appears after you
insert the disc).
To automatically determine the best HDMI
resolution:
1 Press ENTER. The Settings menu opens.
5 Press to go to the previous menu.
Parental
Display
Selecting the subtitle language
System
HDMI Status
C onnected
1080p (HDMI)
HDMI Auto
16:9 W ide
HDMI preferred Format
R es olution
To select the subtitle language:
1 Press ENTER. The Settings menu opens.
Network
Display
Audio
Set ting s
TV Aspect
Film Mode(1080p24)
Off
Network
Language
Language
Display
OSD
English
Menu
Audio
Subtitle
Auto
Auto
None
Audio
Settings
Language
2 Press or to select Display. The Display menu
opens. Your player displays the best HDMI
format for the connected TV.
Parental
System
3 Press to go to the previous menu.
2 Press or to select Language. The Language
menu opens.
3 Press , press or to select Subtitle, then
press ENTER.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Selecting the video output resolution
Selecting the TV aspect ratio
1 Press ENTER. The Settings menu opens.
To select the video output resolution:
1 Press ENTER. The Settings menu opens.
Parental
Display
Parental
System
HDMI Status
C onnected
1080p (HDMI)
HDMI Auto
16:9 W ide
Display
HDMI preferred Format
R es olution
System
HDMI Status
C onnected
Network
Display
Audio
Set ting s
TV Aspect
HDMI preferred Format
R es olution
1080p (HDMI)
HDMI Auto
16:9 W ide
Network
Display
Audio
Film Mode(1080p24)
Off
Set ting s
TV Aspect
Film Mode(1080p24)
Off
Language
Language
2 Press or to select Display. The Display menu
opens.
2 Press or to select Display. The Display menu
3 Press , press or to select TV Aspect, then
press ENTER.
4 Press or to select the aspect ratio you want,
then press ENTER. You can select 16:9
Pillarbox, 4:3 Pan & Scan, 4:3 Letter Box, or
16:9 wide.
opens.
3 Press , to select Resolution, then press ENTER.
4 Press or to select the resolution you want,
then press ENTER.
TV type
Resolution
Notes
If your TV is a standard-definition
NTSC TV (American or Asian SD TV)
480i
•
•
If your TV has a rectangular (16:9) aspect ratio,
choose one of the 16:9 aspect ratios. If your TV
has a square (4:3) aspect ratio, choose one of the
4:3 aspect ratios.
Setting your player for one of the 16:9 settings
when connected to a 4:3 TV or setting your
player for one of the 4:3 settings when
connected to a 16:9 TV will produce
unpredictable results.
In the standard-definition (480p) mode, your
player has 16:9 and 4:3 aspect ratios. In the
high-definition (720p/1080i/1080p) mode, your
player has only 16:9 aspect ratio.
If your TV is an enhanced-definition 480p
TV (EDTV)
If your TV is a high-definition TV
(HDTV) capable of 720p only
720p
If your TV is a high-definition TV
(HDTV) capable of 1080i only
1080i
If the TV is a high-definition TV
(HDTV) capable of 1080p (any frame
rate) connected to the HDMI jack on
your player
1080p (HDMI)
•
If your TV is a high-definition TV
(HDTV) connected to the HDMI jack on
your player and you want your player
to set the output resolution based on
information exchanged between the
TV and your player over the HDMI
cable
HDMI Auto
5 Press to go to the previous menu.
Turning film mode on or off
Movies are recorded on film at a rate of 24 pictures
(frames) per second. Many of the movies on Blu-ray
Discs are recorded on the discs at this frame rate.
However, not all TVs can display 24 progressive
frames/second of video. If the TV cannot display
this frame rate, you need to turn off Film Mode
(1080p24).
Notes
•
•
Selecting a resolution the TV does not support
could result in an unstable picture or loss of the
picture. See the documentation that came with
the TV to find the resolutions the TV supports.
Only the HDMI output on your player supports
1080p video output at any frame rate. If the TV
is connected to the component output, the
video output is limited to 1080i.
To turn film mode on or off:
1 Press ENTER. The Settings menu opens.
Parental
Display
System
HDMI Status
C onnected
1080p (HDMI)
HDMI Auto
16:9 W ide
5 Press to go to the previous menu.
HDMI preferred Format
R es olution
Network
Display
Audio
Set ting s
TV Aspect
Film Mode(1080p24)
Off
Language
2 Press or to select Display. The Display menu
opens.
3 Press , press or to select Film Mode
(1080p24), then press ENTER.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
4 Press or to select On or Off. Off selects a 60
3 Press , press or to select Digital Output,
then press ENTER.
frames/second output format.
5 Press to go to the previous menu.
4 Press or to select the digital output mode
you want, then press ENTER. You can select:
Selecting the PCM downsampling rate
• PCM—Sends mixed digital audio over the
HDMI connection in 7.1CH PCM (if supported
by HDMI device) and the SPDIF connection in
two-channel PCM format.
To select the PCM downsampling rate:
1 Press ENTER. The Settings menu opens.
• Bitstream HD—Sends the original bitstream
from the disc over the HDMI and SPDIF
connections using highest quality possible.
HDMI has the higher quality capabilities with
advanced audio codecs like TrueHD and
DTS-HD. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
System
Au dio
Network
Display
PCM Downsampling
Digital Output
48 K hz
PCM
Off
Dynamic Range Control
Settings
Audio
Language
• Bitstream Legacy—Sends the original
bitstream from the disc over the HDMI and
SPDIF connections using legacy audio
formats. Blu-ray audio is limited to the
soundtrack for the main movie (no PIP audio
and no effects audio).
• Bitstream mixed—Sends mixed and encoded
Blu-ray audio streams in a single bitstream.
This mode is primarily intended for use with
SPDIF 5.1CH receivers to produce mixed
Blu-ray audio in surround sound.
Parental
2 Press , press or to select Audio. The Audio
menu opens.
3 Press to select PCM Downsampling, then
press ENTER.
4 Press one or more times to select the PCM
downsampling rate you want. You can select
48KHz, 96KHz, or Off.
5 Press to go to the previous menu.
• If you have a surround sound amplifier
connected to your player through the SPDIF
jack, select the highest sampling rate the
receiver supports. See the documentation that
came with the receiver.
• If you do not have a surround sound amplifier
connected to your player, select 48KHz.
• If you have a surround sound amplifier
connected to your player through the analog
audio L and R jacks, select 48KHz.
• If you have a surround sound amplifier
connected to your player through the HDMI
output, select 48KHz.
Turning dynamic range control on or off
Dynamic range control is only active when a Dolby
Digital signal is detected.
When Dynamic Range Control is set to Off, movie
soundtracks are played with the standard dynamic
range.
When movie soundtracks are played at low volume
or from smaller speakers, you can set Dynamic
Range Control to On. Your player applies
appropriate compression to make low-level content
more intelligible and prevent dramatic passages
from getting too loud.
To turn dynamic range control on or off:
1 Press ENTER. The Settings menu opens.
Note
Incorrectly setting the digital audio output’s PCM
sampling rate may result in unpredictable audio
playback.
System
Au dio
5 Press to go to the previous menu.
Network
Display
PCM Downsampling
Digital Output
48 K hz
PCM
Off
Selecting the digital audio output mode
Dynamic Range Control
Settings
Audio
To select the digital audio output mode:
1 Press ENTER. The Settings menu opens.
Language
Parental
System
Au dio
Network
Display
PCM Downsampling
Digital Output
48 K hz
PCM
Off
2 Press or to select Audio. The Audio menu
Dynamic Range Control
Settings
opens.
Audio
3 Press , press or to select Dynamic Range
Control, then press ENTER.
Language
4 Press or to select On or Off.
Parental
5 Press to go to the previous menu.
2 Press or to select Audio. The Audio menu
opens.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Setting the parental control password
Selecting the parental control country
If a Blu-ray Disc has parental rating systems for
more than one country, you can select the country
you want to use.
To set the parental control password:
1 Press ENTER. The Settings menu opens.
To set the parental control country:
Display
Parental
Audio
Parental Country
Parental Level
USA
Language
Parental
System
8[Adult ]
Settings
Parental Password
Network
2 Press or to select Parental. The Parental
menu opens.
3 Press . The password screen opens.
2 If the Parental Control option is set to On, set
the option to Off. See “Turning parental controls
on or off” on page 14.
4 Enter the default password (0000). If you forget
your password, reset your player to the factory
defaults. The password will be reset to 0000. For
more information, see “Resetting settings to the
factory defaults” on page 16
3 Press or to select Parental. The Parental
menu opens.
5 Press to go to the previous menu.
4 Press to select Parental County, then press
ENTER.
Turning parental controls on or off
Note
To turn parental controls on or off:
1 Press ENTER. The Settings menu opens.
Some Blu-ray Discs do not have multiple countries
encoded for parental controls.
5 Press one or more times to select the country
Display
you want.
Parental
Audio
Parental Country
Parental Level
USA
Language
Parental
System
Setting the parental control level
8[Adult ]
Settings
Parental Password
To set the parental control level:
1 Press ENTER. The Settings menu opens.
Network
2 Press or to select Parental. The Parental
menu opens.
3 Press . The password screen opens.
4 Enter the password. If you forget your password,
reset your player to the factory defaults. The
password will be reset to 0000. For more
information, see “Resetting settings to the
factory defaults” on page 16
5 Press or to select Parental Control, then
press ENTER.
2 Press or to select Parental. The Parental
menu opens.
6 Press or to select On or Off, then press
ENTER. If you select On, you can change the
other parental control options. If you select Off,
you cannot change the other parental control
options.
3 If the Parental Control option is set to On, set
the option to Off. See “Turning parental controls
on or off” on page 14.
4 Press or to select Parental Level, then press
ENTER.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
5 Press or to select the rating level you want
2 Press or to select System. The System menu
to block, then press ENTER. That rating and all
opens.
higher ratings will be blocked. You can select:
• 1[Kid Safe]—Suitable for all children.
• 2[G]—General audiences.
• 3[PG]—Parental guidance suggested.
• 4[PG-13]—Not suitable for anyone under 13.
• 5[PGR]—Parental guidance recommended.
3 Press , press or to select BD-Live Internet
Access, then press ENTER.
4 Press one or more times to select the access
level you want. You can select:
• Limit Access—Allows Internet access with
valid “BD-Live” network access approval.
• 6[R]—Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
• Always Allow Access—Always allows BD-Live
Internet access.
• 7[NC-17]—Not suitable for anyone under 17.
• 8[Adult]—All DVDs can be played.
• Prohibit Access—Never allows BD-Live
Internet access.
5 Press to go to the previous menu.
Note
These ratings are for DVDs only.
Viewing available BD-Live storage space
6 Press or to select Parental Control, then
press ENTER. Press or to select On.
To view available BD-Live storage space:
1 Press ENTER. The Settings menu opens.
7 Press to go to the previous menu.
Audio
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
Setting automatic disc playback mode
On
Language
Always Allow
USB (1.9GB Free)
To set automatic disc playback mode:
1 Press ENTER. The Settings menu opens.
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
Update Via Network
Required Storage:84 MB
Audio
Network
Displa y
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
2 Press or to select System. The System menu
opens. The available storage space is displayed
next to BD-Live Storage.
Update Via Network
Required Storage:84 MB
Network
Displa y
3 Press to go to the previous menu.
Erasing BD-Live storage
2 Press or to select System. The System menu
opens.
To erase BD-Live storage:
1 Press ENTER. The Settings menu opens.
3 Press to select Optical Disc Autoplay, then
press ENTER.
4 Press or to On or Off. When On is selected
and you insert a Blu-ray Disc, files play back
automatically. When Off is selected and you
insert a Blu-ray Disc, the disc you can select are
displayed on the Settings menu.
Audio
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
5 Press to go to the previous menu.
Update Via Network
Required Storage:84 MB
Network
Displa y
Setting the BD-Live Internet access level
You can set the BD-Live Internet access level to
control access to BD-Live.
To set the BD-Live Internet access level:
1 Press ENTER. The Settings menu opens.
2 Press or to select System. The System menu
opens.
3 Press , press or to select Erase BD-Live
Storage, then press ENTER.
4 Press or to select OK, then press ENTER. All
bookmarks and BD-live content saved in
memory are deleted.
Audio
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
5 Press to go to the previous menu.
Update Via Network
Required Storage:84 MB
Network
Displa y
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Setting the screen saver activation time
Downloading player update software
Your player has a screen saver feature that turns the
screen black when your player is inactive. You can
set the amount of time you want your player to wait
before activating the screen saver.
To download player update software:
1 Press ENTER. The Settings menu opens.
Audio
System
To set the screen saver activation time:
1 Press ENTER. The Settings menu opens.
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Audio
Scr een Saver Duration
Reset Settings
5 M inutes
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Update Via Network
Required Storage:84 MB
Network
Displa y
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
Update Via Network
Required Storage:84 MB
Network
Displa y
2 Press or to select System. The System menu
opens.
3 Press , press or to select Update Via
Network, then press ENTER.
2 Press or to select System. The System menu
4 Follow the on-screen instructions for updating
opens.
the software.
3 Press , press or to select Screen Saver
Duration, then press ENTER.
5 Press to go to the previous menu.
Determining if the network connection is
active
4 Press one or more times to select the amount
of time you want the player to wait before
activating the screen saver feature.
To determine if the network connection is active:
1 Press ENTER. The Settings menu opens.
5 Press to go to the previous menu.
Resetting settings to the factory defaults
To reset settings to the factory defaults:
1 Press ENTER. The Settings menu opens.
Audio
System
Opt ical Disc Auto Play
BD- Live Internet Access
BD- Live Storage
On
Language
Always Allow
USB (1.9GB Free)
Parental
System
Erase Blu-ray Storage
Settings
Scr een Saver Duration
Reset Settings
5 M inutes
Update Via Network
Required Storage:84 MB
Network
Displa y
2 Press or to select Network.
3 Press , press or to select Wired, then press
ENTER. The IP Settings screen opens. If the
network connection is active, Link Up appears
next to Link Status. If the network connection is
not active, Link Down appears next to Link
Status.
2 Press or to select System. The System menu
opens.
3 Press , press or to select Reset Settings,
then press ENTER. A message appears asking
you to confirm your selection.
4 Select OK, then press ENTER to close the
message box.
5 Press to go to the previous menu.
4 Press to go to the previous menu.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Configuring the Internet connection
Maintaining
To configure the Internet connection:
1 Press ENTER. The Settings menu opens.
General guidelines
• The top and back panels of your player may
become hot after a long period of use. This is not a
malfunction.
• When your are not using your player, make sure
that you remove the disc and put your player into
standby mode.
• If you do not use your player for a long period of
time, it may not function correctly. Turn on and
use your player occasionally.
• Do not place objects on the disc tray.
• Do not locate your player:
• Near heating devices or in an enclosed vehicle
• In an area with a temperature over 104°F
(40°C) or humidity over 90%
2 Press or to select Network, then press
ENTER.
3 Press , press or to select Wired, then press
ENTER. The IP Settings screen opens. The IP
Settings screen opens.
• Dirty places
• In an area with direct exposure to sunlight
• Do not install this equipment in a confined
space such as a book case or similar unit. The
ventilation should not be impeded by
covering the ventilation openings with items
such as newspapers, table-cloths, or curtains.
• Make sure that you leave a minimum of 4 inches
(10 cm) around your player for sufficient
ventilation.
Electrical disturbance
If you place your player next to a radio, TV, or VCR,
the image may be poor and the sound may be
distorted. In this case, move your player away from
the radio, TV, or VCR.
Condensation
Condensation may form inside your player when:
• You move your player from a cold area to a warm
4 Press or to select IP Mode, then press
ENTER.
5 Press to select an IP mode. You can select:
area
• You use it in a cold room where you have just
turned on a heater
• Air conditioning is blowing directly on your player
• Your player is in a damp place
If condensation forms inside your player, your
player will not work correctly. Turn on your player,
remove the disc and leave the tray open, then leave
your player on for two to three hours.
To minimize condensation problems, keep the
power cord connected to a power outlet.
• Dynamic—Uses DHCP to automatically
obtain an IP address.
• Manual—Lets you manually configure
network settings, such as IP address, subnet
mask, and gateway settings.
• Off—Disables the network interface.
6 Press to go to the previous menu.
Storing discs
• Do not store discs in a place that is exposed to
direct sunlight or heat.
• Do not store discs in a place that is exposed to
moisture and dust, such as a bathroom or near a
humidifier.
• Store discs vertically in their cases. Stacking discs
or placing objects on discs when not in their cases
may cause warping.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Handling discs
Question
Answer
• To keep a disc clean, do not touch the play side
Can I play Blu-ray Discs and DVDs that No. Region codes indicate that a disc
(non-label side) of the disc.
do not have a region code?
conforms to industry standards. You
cannot play a disc that does not have
a region code.
• Do not attach paper or tape to the disc.
What types of discs will my player
play?
Your player can play:
•
•
Blu-ray Discs
DVD-Video, DVD-RAM (DVD
Video Recording format,
AVCHD format, and JPEG
format), DVD-R/RW (DVD
Video format and DVD Video
Recording format), DVD-R DL
(DVD Video format and DVD
Video Recording format),
DVD+R, DVD+RW, and
DVD+R DL
Cleaning discs
• Before playback, wipe the disc outwards from the
center (not in a circle) with a clean cloth.
•
•
Audio CD
CD-R/RW discs which have
been recorded in one of the
following standards: CD-DA
and still pictures (JPEG).
Close the session after
recording.
Note: Your player cannot write to
discs.
FAQ (frequently asked
questions)
Troubleshooting
Check the following information for the possible
cause and solution for a problem before contacting
the nearest service center or dealer for repairs.
Question
Answer
What do I need to play multi channel Connect the appropriate
The following do not indicate a problem with your
player:
• Regular disc rotation sounds.
surround sound?
amplifier/receiver to the HDMI jack,
the DIGITAL AUDIO OUT jack
(OPTICAL or COAXIAL).
Can I connect headphones to my
player?
You cannot directly connect
headphones to your player. Connect
headphones to the connected TV or
sound system.
• Image disturbance during search.
Resetting your player
To reset your player:
My television has COMPOSITE VIDEO HDMI provides the best video and
IN, COMPONENT(YUV) IN and HDMI IN audio. Component video provides
• If your player “freezes,” press STANDBY/ON on
the front of your player. Wait five seconds then
press STANDBY/ON again. This resets your
player but does not change any settings.
• To reset all settings (include parental control
settings) to the factory default, select Reset
Settings in the System menu.
jacks.
better video than composite video,
but not as good as HDMI video.
Composite video provides good video.
Note: When you connect a TV using
HDMI, the picture takes longer to
display.
Can I play Blu-ray Discs and DVDs
bought in another country?
You can play them if the video
standard is NTSC. However, you
cannot play:
Power
•
Blu-ray Discs that do not
include region code A.
DVDs that do not include
region code 1 or ALL.
Problem
No power
Solution
Make sure that the power cord is
plugged into a power outlet and that
the outlet is supplying power.
•
Region codes are on the discs or disc
packaging.
The player switches to standby mode After a period of inactivity, your player
switches to standby mode
automatically. This is a power saving
feature.
If your player switches to standby
mode unexpectedly, a safety device
may have been activated. Press
STANDBY/ON on the front of your
player.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
Operation
Problem
Solution
The player is on and the logo and
menu appear, but there is no image
from the disc
•
Make sure that the disc is not
Problem
Remote control does not work
Solution
dirty. For instructions on
cleaning a disc, see
•
Make sure that you are
pointing the remote control
at the remote control sensor
on the front of your player.
Make sure that there are no
obstructions between the
remote control and the
remote control sensor on the
front of your player.
“Cleaning discs” on page 18.
Reset your player. For
instructions, see “Resetting
your player” on page 18.
•
•
•
The player freezes when reading a
CD-R or DVD-R
Reset your player. For
instructions, see “Resetting
your player” on page 18.
When you see “loading” on
the screen, press
•
•
Make sure that there is no
colored glass between the
remote control and the
remote control sensor on the
front of your player. Colored
glass, such as the glass door
of an entertainment center,
can interfere with signal
reception.
(open/close) to open the disc
tray and remove the disc.
Clean the disc. (For
instructions, see “Cleaning
discs” on page 18), then try
the disc again.
If your player freezes again,
the disc may contain some
content that is not
compatible with your player.
Do no try playing the disc
with your player.
•
Make sure that the remote
control sensor is not exposed
to direct sunlight or bright
light. These can interfere
with signal reception.
•
•
Replace the batteries.
Some or all functions do not work
Some functions are not
allowed by the disc, for
example, fast-forwarding
through the warning
information at the
beginning of the disc.
Problem
Video does not appear on the TV
screen or the picture is distorted
Solution
•
Make sure that the TV is
connected to the correct
jacks on the back of your
player.
•
•
Condensation may have
formed inside your player.
Turn off your player and wait
one to two hours for the
condensation to evaporate.
Reset your player. For
•
•
Make sure that the TV is set
to the correct video input
source.
The TV may be in screen
saver mode. Check the
documentation that came
with the TV for instructions
about “waking” your TV.
Reset your player. For
instructions, see “Resetting
your player” on page 18.
instructions, see “Resetting
your player” on page 18.
Playback fails to start or starts then
stops even when (play/pause) is
pressed
•
•
•
Make sure that the disc is
inserted face up in the disc
tray.
Make sure that the disc is not
dirty. For instructions, see
“Cleaning discs” on page 18.
The disc may be blank or
incompatible with your
player. Try another disc.
•
•
Video is not output in high definition
High definition video cannot
be output through the VIDEO
OUT jack. You must connect
the TV to your player using
the COMPONENT OUT jacks
or HDMI jack.
Make sure that the correct
HDMI or component video
resolution has be selected in
the Setup menu. See
“Selecting the video output
resolution” on page 12.
Depending on the Blu-ray
Disc, output from the
COMPONENT VIDEO OUT
jacks may be restricted to
480p.
Start up is slow and audio and video
output takes a long time
•
•
If power has been
interrupted or the power
cord has just been
•
•
connected, startup is slow.
This is not a defect.
If your player is connected to
the TV with an HDMI cable,
startup is slow. This is not a
defect.
When reading a disc, the disc tray
opens
•
•
•
Make sure that the disc is not
dirty. For instructions, see
“Cleaning discs” on page 18.
The disc may be
incompatible with your
player. Try another disc.
Reset your player. For
instructions, see “Resetting
your player” on page 18.
The 4:3 aspect ratio picture expands
left and right or the picture size is
incorrect
•
•
Use the TV to change the
aspect ratio. See the
documentation that came
with the TV.
When using a component
video cable, set TV Aspect
to 4:3 Pan & Scan.
Audio or video pause during playback
•
•
Make sure that the disc is not
dirty. For instructions, see
“Cleaning discs” on page 18.
Reset your player. For
instructions, see “Resetting
your player” on page 18.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
Other playback problems
Problem
Solution
There is no apparent change in the
picture quality when the picture
settings are changed in the Setup
menu
•
Depending on the video
Problem
Audio and video pause momentarily
Solution
type, changes may not be
apparent.
•
This happens when your
player is changing chapters
in a playlist.
When playing a BD-Live disc, the
screen is black
•
Erase BD Storage. See
“Erasing BD-Live storage” on
page 15.
•
When playing a disc that is
recorded on both layers,
audio and video may pause
when your player is
•
•
Make sure that your Internet
connection is working.
Make sure that the Internet
cable is connected securely
and correctly to your player
and the Internet jack. Some
discs require an Internet
connection to play.
changing layers.
Blu-ray Disc or DVD does not play
•
•
Make sure that the disc has
the correct region code.
Check the rating on the disc.
You may have set parental
controls to block that rating.
Some Blu-ray discs will only
play over an HDMI
•
connection.
HDMI connections
Picture-in-Picture (PIP) does not work
on a Blu-ray Disc
•
•
Make sure that the disc
supports PIP mode.
Problem
The 4:3 aspect ratio picture expands
left and right or the picture size is
incorrect
Solution
•
Change TV Aspect to 16:9.
See “Selecting the TV aspect
ratio” on page 12.
Turn on subtitles. See
“Selecting the subtitle
language” on page 11.
Make sure that the disc was
recorded with subtitles. If
the disc has subtitles, a
subtitle option should
appear on the disc’s menu.
•
BD-Live and USB connections
Problem
Cannot connect to the Internet
Solution
Cannot change the viewing angle
•
•
Some discs are not recorded
with multiple viewing
angles. Check the
•
Make sure that the BD-Live
Disc you are using is a legal
copy.
Make sure that the USB flash
drive is connected correctly
and securely.
Make sure that the network
connection is working.
documentation that came
with the disc.
•
Not all scenes on a disc have
multiple viewing angles.
Check the documentation
that came with the disc.
•
•
After connecting to the Internet,
cannot download a file
Erase BD Storage. See
“Erasing BD-Live storage” on
page 15.
Make sure that the Internet
connection is working.
Try a different USB flash
drive.
Resume function does not work
•
•
If you press (stop) twice,
the resume information is
erased.
Some discs do not support
the resume function.
•
•
File was downloaded, but playback
from file pauses
•
•
Make sure that the USB flash
drive is a USB 2.0 device.
Using a USB 1.1 device may
cause pausing.
Try a different USB flash
drive.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
• HD movie files contained on a 1.0/1.1 CD or USB
flash drive may not play correctly. Blu-ray, DVD, or
USB 2.0 are recommended to play back HD movie
files.
Specifications
Specifications are subject to change without notice.
• Your player does not support files that are
recorded with GMC (Global Motion
Compensation) or Qpel (Quarter pixel). Those are
video encoding techniques in MPEG4 standard,
like DivX or XVID.
System and outputs
Media
BD-ROM, BD-JAVA 1.1, DVD-Video,
DVD+RW/+R, DVD-RW/-R, CD-RW/-R
TV signal system
Video output
NTSC
Electric level output: 1.0 Vp-p
Resistance: 75S
Output connector: Pin jack (1 system)
Y output level: 1.0 Vp-p Resistance: 75
PB output level: 0.7 Vp-p Resistance: 75
PR output level: 0.7 Vp-p Resistance: 75
Output connector: Pin jack (Y: green,
PB: blue, PR: red)(1 set)
Output format: 480i, 480p, 720p, 1080i
Output level: 2 Vrms (1 kHz, 0 dB)
Output connector: Pin jack
MP3/WMA audio file requirement (USB/DISC)
• File extensions: .mp3, .wma
• Sampling frequency: Within 8 to 48kHz (WMA),
within 11 to 48kHz (Mp3)
• Bit rate: Within 8-320kbps (WMA, Mp3)
• CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF and UDF Bridge format
• Maximum Files/Folder: Less than 2000 (total
number of files and folders)
• Depending on the size and number of the
MP3/WMA files, it may take several minutes to
read the contents of the media.
• Your player does not support the ID3 Tag
embedded in the MP3 file.
• The total playback time indicated on the screen
may not correct for VBR files.
Component video (Y, CB,CR)
Audio output (analog)
Audio output (digital)
Number of connectors: 2-channel (1)
Optical digital output (1)
Coaxial digital output (pin jack) (1)
DVD (linear audio):
Audio performance (frequency
response)
•
•
4 Hz to 22 kHz (48 kHz sampling)
4 Hz to 44 kHz (96 kHz sampling)
CD-Audio: 4 Hz to 20 kHz
S/N ratio: 90 dB
Dynamic range: 80 dB
Photo file requirement (USB/DISC)
• File extensions: .jpg , .jpeg , .png
• Recommended size:
Total harmonic distortion: 0.004%
• Less than 4,000 x 3,000 x 24 bit/pixel
• Less than 3,000 x 3,000 x 32 bit/pixel
• CD-R/RW, DVD R/RW, BD-R/RE Format:
ISO 9660+JOLIET, UDF, and UDF Bridge format
• Maximum Files/Folder: Less than 2000 (total
number of files and folders)
• Progressive and lossless compression photo
image files are not supported.
• Depending on the size and number of the photo
files, it may take several minutes to read the
contents of the media.
HDMI output
Output format: 480i, 480p, 720p,1080i,
1080p
Output Connector: Type A (19 pin)
General
Power
Power consumption
Dimensions
L × W × H
Weight
110V-120V ~ 50/60Hz
25 W
16.93 × 10.0 × 1.89 inches
(430 × 254 × 48 mm)
7.5 lbs. (3.4 kg)
Operating temperature
Operating humidity
41°F to 95°F (5°C to 35°C)
10% to 75%
Legal notices
Video file requirement (USB/DISC)
FCC Part 15
Video file compatibility with your player is limited
as follows:
• Available resolution size: 1920x1080 (W x H) pixels
• File extensions: .wmv
• Playable Audio format: Dolby Digital , DTS , MP3 ,
WMA , AAC , AC3
• Sampling frequency: within 32 to 48kHz (WMA),
within 16-48kHz (Mp3)
• Bit rate: within 20-320kbps (WMA), within
32-320kbps (Mp3)
• CD-R/RW, DVD R/RW, BD-R/RE Format: ISO
9660+JOLIET, UDF and UDF Bridge format
• Maximum Files/Folder: Less than 2000. The movie
file name and subtitle are limited to 180
characters.
This device complies with Part 15 of the FCC Rules. Operation of
this product is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device
must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply within the
limits for a class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
• Not all of the WMA and AAC Audio formats are
compatible with your player.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
•
•
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced technician for help.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
NS-BRDVD3-CA Blu-Ray Disc Player
FCC warning
Macrovision
Changes or modifications not expressly approved by the party
This product incorporates copyright protection technology that
is protected by U.S. patents and other intellectual property
rights. Use of this copyright protection technology must be
authorized by Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is prohibited.
responsible for compliance with the FCC Rules could void the
user’s authority to operate this equipment.
DHHS and FDA safety certification
This product is made and tested to meet safety standards of the
FCC, requirements and compliance with safety performance of
the U.S. Department of Health and Human Services, and also
with FDA Radiation Performance Standards 21 CFR Subchapter J.
Dolby Laboratories
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Canada ICES-003 statement
This Class B digital apparatus complies with Canadian ICES-003.
DTS, Inc.
Manufactured under license under U.S.
Patent #’s: 5,451,942; 5,956,674;5,974,380;
5,978,762;6,487,535 & other U.S. and
worldwide patents issued & pending. DTS
is a registered trademark and the DTS logos, symbol, DTS-HD and
DTS-HD Advanced Digital Out are trademarks of DTS, Inc.
1996-2008 DTS, Inc. All rights reserved.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Blu-Ray Disc Player
This warranty also does not cover:
One-year limited warranty
•
•
•
Damage due to incorrect operation or maintenance
Connection to an incorrect voltage supply
Attempted repair by anyone other than a facility
authorized by Insignia to service the Product
Products sold as is or with all faults
Consumables, such as fuses or batteries
Products where the factory applied serial number has been
altered or removed
Insignia Products (“Insignia”) warrants to you, the original
purchaser of this new product (“Product”), that the Product shall
be free of defects in the original manufacture of the material or
workmanship for a period of one (1) year from the date of your
purchase of the Product (“Warranty Period”). This Product must
be purchased from an authorized dealer of Insignia brand
products and packaged with this warranty statement. This
warranty does not cover refurbished Product. If you notify
Insignia during the Warranty Period of a defect covered by this
warranty that requires service, terms of this warranty apply.
•
•
•
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS
YOUR EXCLUSIVE REMEDY. INSIGNIA SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS
PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS
OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS.
INSIGNIA PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES
WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED
WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED
TO, ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET
FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME
STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TO YOU. THIS
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE
OR PROVINCE TO PROVINCE.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you
purchased the Product. The purchase date is printed on the
receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the
material or workmanship of the Product is determined to be
defective by an authorized Insignia repair center or store
personnel, Insignia will (at its sole option): (1) repair the Product
with new or rebuilt parts; or (2) replace the Product at no charge
with new or rebuilt comparable products or parts. Products and
parts replaced under this warranty become the property of
Insignia and are not returned to you. If service of Products or
parts are required after the Warranty Period expires, you must
pay all labor and parts charges. This warranty lasts as long as you
own your Insignia Product during the Warranty Period. Warranty
coverage terminates if you sell or otherwise transfer the Product.
Contact Insignia:
For customer service please call 1-877-467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, Minnesota, U.S.A.
55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy
Enterprise Services, Inc. Registered in some countries. All other
products and brand names are trademarks of their respective
owners.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your
original receipt and the Product to the store you purchased it
from. Make sure that you place the Product in its original
packaging or packaging that provides the same amount of
protection as the original packaging. If you purchased the
Product from an online web site, mail your original receipt and
the Product to the address listed on the web site. Make sure that
you put the Product in its original packaging or packaging that
provides the same amount of protection as the original
packaging.
To obtain in-home warranty service for a television with a screen
30 inches or larger, call 1-888-BESTBUY. Call agents will diagnose
and correct the issue over the phone or will have an
Insignia-approved repair person dispatched to your home.
Should the Insignia-approved repair person not correct the issue
on the first call, an Insignia television (size and features to be
determined by Insignia) will be loaned to you until your TV is
repaired and returned, at no charge to you. This feature is only
available to Insignia television consumers residing in the United
States.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the
product in the United States, Canada, and Mexico.
What does the warranty not cover?
This warranty does not cover:
•
•
•
•
•
•
•
•
•
•
•
Customer instruction
Installation
Set up adjustments
Cosmetic damage
Damage due to acts of God, such as lightning strikes
Accident
Misuse
Abuse
Negligence
Commercial use
Modification of any part of the Product, including the
antenna
Plasma display panel damaged by static (non-moving)
images applied for lengthy periods (burn-in).
•
23
Download from Www.Somanuals.com. All Manuals Search And Download.
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2009 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
09-0845
Download from Www.Somanuals.com. All Manuals Search And Download.
|