JVC Car Video System VC R70P HDA User Manual

LCD Monitor/Viewfinder connection to KA-HD250  
1.Marshall VC-R70P-HDA  
Tally  
D-sub 9-pin  
Analog component  
BNCx3-BNCx3  
Recommended attachment  
1/4” tap  
(alternative)  
Manfrotto:143S  
Flash Shoe, 1/4" Male Attachment  
Marshall:V-LCD-MT-01  
Flash Shoe, 1/4" Male Attachment  
Etsumi:E-6085  
Pin Screw (1/4” male/male)  
Velbon:QHD-51  
AC adapter  
[provided]  
Pan head  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD Monitor/Viewfinder connection to KA-HD250  
3.VF-P400  
VF 6-pin  
No optional  
attachment  
is required  
Component out  
SDI out  
SD  
HD  
Yes  
No  
Yes  
KA-V400  
20-pin/6-pin  
converter  
Yes  
(letter box)  
When VF-P400 is used, the setting of VF signal in  
the menu of LCD/VF screen of GY-HD250 should  
be set to “Y”. When this is set to Y or COMPOSITE in  
the HDV mode, images are not output from the  
[Y/PB/PR] terminal. (Images can be output from SDI  
terminal even in HDV mode.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD Monitor/Viewfinder connection to KA-HD250  
4.VF-P550W  
Not available.  
(Physically the connector of VF-P550W can be  
connected to KA-HD250 directly. But, picture  
cannot be displayed on VF-P550W due to the  
different pin assignment.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notification of LCD Monitor/Viewfinder connection  
Type of viewfinder  
Provided VF  
VF-P400  
LCD monitors  
RGB  
BNCx3  
RGB  
RGB  
Yes  
Y
20-pin  
Y
Y/PB/PR  
BNCx3  
Y/PB/PR  
BNCx3  
VBS  
BNCx3  
Composite  
Composite  
Yes  
Y
BNCx1  
Y
Terminal  
Signal  
GY-HD250 VF signal  
HD  
HD component SD component  
Y
Component  
Yes  
Component  
Yes  
Y
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
No  
Signal  
DV  
Yes  
No  
Yes  
Yes  
Reverse picture  
Zebra  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Display  
Skin detail range  
Safety zone  
Focus assist  
Yes  
No  
No  
No  
Yes  
No  
No  
No  
No  
No  
Yes  
No  
No  
No  
No  
No  
*1 Characters from the GY-HD250 are displayed for Y/PB/PR terminal output signals.  
Therefore, use the HD/SDSDI terminal output signal for this line.  
*2 Signal is only output to the Y terminal of the Y/PB/PR terminal.  
*3 SKIN TONE display is not available.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

InFocus Power Hammer H55SC User Manual
Intel Computer Hardware 6700PXH User Manual
Intel Modem MD566X User Manual
Interquartz Telephone 9826N User Manual
Jenn Air Refrigerator 2300283C User Manual
Kathrein Automobile Accessories HDZ 100 User Manual
Kenmore Beverage Dispenser 5648815022 User Manual
Kenwood Juicer AT265 User Manual
Klipsch Speaker RSW 10D User Manual
Kodak Camera Accessories CIS 106 User Manual